Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Real Time Clock driver for Marvell 88PM860x PMIC
4 *
5 * Copyright (c) 2010 Marvell International Ltd.
6 * Author: Haojian Zhuang <haojian.zhuang@marvell.com>
7 */
8
9#include <linux/kernel.h>
10#include <linux/module.h>
11#include <linux/of.h>
12#include <linux/platform_device.h>
13#include <linux/slab.h>
14#include <linux/mutex.h>
15#include <linux/rtc.h>
16#include <linux/delay.h>
17#include <linux/mfd/core.h>
18#include <linux/mfd/88pm860x.h>
19
20#define VRTC_CALIBRATION
21
22struct pm860x_rtc_info {
23 struct pm860x_chip *chip;
24 struct i2c_client *i2c;
25 struct rtc_device *rtc_dev;
26 struct device *dev;
27 struct delayed_work calib_work;
28
29 int irq;
30 int vrtc;
31};
32
33#define REG_VRTC_MEAS1 0x7D
34
35#define REG0_ADDR 0xB0
36#define REG1_ADDR 0xB2
37#define REG2_ADDR 0xB4
38#define REG3_ADDR 0xB6
39
40#define REG0_DATA 0xB1
41#define REG1_DATA 0xB3
42#define REG2_DATA 0xB5
43#define REG3_DATA 0xB7
44
45/* bit definitions of Measurement Enable Register 2 (0x51) */
46#define MEAS2_VRTC (1 << 0)
47
48/* bit definitions of RTC Register 1 (0xA0) */
49#define ALARM_EN (1 << 3)
50#define ALARM_WAKEUP (1 << 4)
51#define ALARM (1 << 5)
52#define RTC1_USE_XO (1 << 7)
53
54#define VRTC_CALIB_INTERVAL (HZ * 60 * 10) /* 10 minutes */
55
56static irqreturn_t rtc_update_handler(int irq, void *data)
57{
58 struct pm860x_rtc_info *info = (struct pm860x_rtc_info *)data;
59 int mask;
60
61 mask = ALARM | ALARM_WAKEUP;
62 pm860x_set_bits(info->i2c, PM8607_RTC1, mask | ALARM_EN, mask);
63 rtc_update_irq(info->rtc_dev, 1, RTC_AF);
64 return IRQ_HANDLED;
65}
66
67static int pm860x_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
68{
69 struct pm860x_rtc_info *info = dev_get_drvdata(dev);
70
71 if (enabled)
72 pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, ALARM_EN);
73 else
74 pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, 0);
75 return 0;
76}
77
78static int pm860x_rtc_read_time(struct device *dev, struct rtc_time *tm)
79{
80 struct pm860x_rtc_info *info = dev_get_drvdata(dev);
81 unsigned char buf[8];
82 unsigned long ticks, base, data;
83
84 pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
85 dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
86 buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
87 base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
88 (buf[5] << 8) | buf[7];
89
90 /* load 32-bit read-only counter */
91 pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
92 data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
93 (buf[1] << 8) | buf[0];
94 ticks = base + data;
95 dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
96 base, data, ticks);
97
98 rtc_time64_to_tm(ticks, tm);
99
100 return 0;
101}
102
103static int pm860x_rtc_set_time(struct device *dev, struct rtc_time *tm)
104{
105 struct pm860x_rtc_info *info = dev_get_drvdata(dev);
106 unsigned char buf[4];
107 unsigned long ticks, base, data;
108
109 ticks = rtc_tm_to_time64(tm);
110
111 /* load 32-bit read-only counter */
112 pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
113 data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
114 (buf[1] << 8) | buf[0];
115 base = ticks - data;
116 dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
117 base, data, ticks);
118
119 pm860x_page_reg_write(info->i2c, REG0_DATA, (base >> 24) & 0xFF);
120 pm860x_page_reg_write(info->i2c, REG1_DATA, (base >> 16) & 0xFF);
121 pm860x_page_reg_write(info->i2c, REG2_DATA, (base >> 8) & 0xFF);
122 pm860x_page_reg_write(info->i2c, REG3_DATA, base & 0xFF);
123
124 return 0;
125}
126
127static int pm860x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
128{
129 struct pm860x_rtc_info *info = dev_get_drvdata(dev);
130 unsigned char buf[8];
131 unsigned long ticks, base, data;
132 int ret;
133
134 pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
135 dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
136 buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
137 base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
138 (buf[5] << 8) | buf[7];
139
140 pm860x_bulk_read(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
141 data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
142 (buf[1] << 8) | buf[0];
143 ticks = base + data;
144 dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
145 base, data, ticks);
146
147 rtc_time64_to_tm(ticks, &alrm->time);
148 ret = pm860x_reg_read(info->i2c, PM8607_RTC1);
149 alrm->enabled = (ret & ALARM_EN) ? 1 : 0;
150 alrm->pending = (ret & (ALARM | ALARM_WAKEUP)) ? 1 : 0;
151 return 0;
152}
153
154static int pm860x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
155{
156 struct pm860x_rtc_info *info = dev_get_drvdata(dev);
157 unsigned long ticks, base, data;
158 unsigned char buf[8];
159 int mask;
160
161 pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, 0);
162
163 pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
164 dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
165 buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
166 base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
167 (buf[5] << 8) | buf[7];
168
169 ticks = rtc_tm_to_time64(&alrm->time);
170 data = ticks - base;
171
172 buf[0] = data & 0xff;
173 buf[1] = (data >> 8) & 0xff;
174 buf[2] = (data >> 16) & 0xff;
175 buf[3] = (data >> 24) & 0xff;
176 pm860x_bulk_write(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
177 if (alrm->enabled) {
178 mask = ALARM | ALARM_WAKEUP | ALARM_EN;
179 pm860x_set_bits(info->i2c, PM8607_RTC1, mask, mask);
180 } else {
181 mask = ALARM | ALARM_WAKEUP | ALARM_EN;
182 pm860x_set_bits(info->i2c, PM8607_RTC1, mask,
183 ALARM | ALARM_WAKEUP);
184 }
185 return 0;
186}
187
188static const struct rtc_class_ops pm860x_rtc_ops = {
189 .read_time = pm860x_rtc_read_time,
190 .set_time = pm860x_rtc_set_time,
191 .read_alarm = pm860x_rtc_read_alarm,
192 .set_alarm = pm860x_rtc_set_alarm,
193 .alarm_irq_enable = pm860x_rtc_alarm_irq_enable,
194};
195
196#ifdef VRTC_CALIBRATION
197static void calibrate_vrtc_work(struct work_struct *work)
198{
199 struct pm860x_rtc_info *info = container_of(work,
200 struct pm860x_rtc_info, calib_work.work);
201 unsigned char buf[2];
202 unsigned int sum, data, mean, vrtc_set;
203 int i;
204
205 for (i = 0, sum = 0; i < 16; i++) {
206 msleep(100);
207 pm860x_bulk_read(info->i2c, REG_VRTC_MEAS1, 2, buf);
208 data = (buf[0] << 4) | buf[1];
209 data = (data * 5400) >> 12; /* convert to mv */
210 sum += data;
211 }
212 mean = sum >> 4;
213 vrtc_set = 2700 + (info->vrtc & 0x3) * 200;
214 dev_dbg(info->dev, "mean:%d, vrtc_set:%d\n", mean, vrtc_set);
215
216 sum = pm860x_reg_read(info->i2c, PM8607_RTC_MISC1);
217 data = sum & 0x3;
218 if ((mean + 200) < vrtc_set) {
219 /* try higher voltage */
220 if (++data == 4)
221 goto out;
222 data = (sum & 0xf8) | (data & 0x3);
223 pm860x_reg_write(info->i2c, PM8607_RTC_MISC1, data);
224 } else if ((mean - 200) > vrtc_set) {
225 /* try lower voltage */
226 if (data-- == 0)
227 goto out;
228 data = (sum & 0xf8) | (data & 0x3);
229 pm860x_reg_write(info->i2c, PM8607_RTC_MISC1, data);
230 } else
231 goto out;
232 dev_dbg(info->dev, "set 0x%x to RTC_MISC1\n", data);
233 /* trigger next calibration since VRTC is updated */
234 schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL);
235 return;
236out:
237 /* disable measurement */
238 pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, 0);
239 dev_dbg(info->dev, "finish VRTC calibration\n");
240 return;
241}
242#endif
243
244#ifdef CONFIG_OF
245static int pm860x_rtc_dt_init(struct platform_device *pdev,
246 struct pm860x_rtc_info *info)
247{
248 struct device_node *np = pdev->dev.parent->of_node;
249 int ret;
250 if (!np)
251 return -ENODEV;
252 np = of_get_child_by_name(np, "rtc");
253 if (!np) {
254 dev_err(&pdev->dev, "failed to find rtc node\n");
255 return -ENODEV;
256 }
257 ret = of_property_read_u32(np, "marvell,88pm860x-vrtc", &info->vrtc);
258 if (ret)
259 info->vrtc = 0;
260 of_node_put(np);
261 return 0;
262}
263#else
264#define pm860x_rtc_dt_init(x, y) do { } while (0)
265#endif
266
267static int pm860x_rtc_probe(struct platform_device *pdev)
268{
269 struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
270 struct pm860x_rtc_info *info;
271 int ret;
272
273 info = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_rtc_info),
274 GFP_KERNEL);
275 if (!info)
276 return -ENOMEM;
277 info->irq = platform_get_irq(pdev, 0);
278 if (info->irq < 0)
279 return info->irq;
280
281 info->chip = chip;
282 info->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
283 info->dev = &pdev->dev;
284 dev_set_drvdata(&pdev->dev, info);
285
286 info->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
287 if (IS_ERR(info->rtc_dev))
288 return PTR_ERR(info->rtc_dev);
289
290 ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
291 rtc_update_handler, IRQF_ONESHOT, "rtc",
292 info);
293 if (ret < 0) {
294 dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
295 info->irq, ret);
296 return ret;
297 }
298
299 /* set addresses of 32-bit base value for RTC time */
300 pm860x_page_reg_write(info->i2c, REG0_ADDR, REG0_DATA);
301 pm860x_page_reg_write(info->i2c, REG1_ADDR, REG1_DATA);
302 pm860x_page_reg_write(info->i2c, REG2_ADDR, REG2_DATA);
303 pm860x_page_reg_write(info->i2c, REG3_ADDR, REG3_DATA);
304
305 pm860x_rtc_dt_init(pdev, info);
306
307 info->rtc_dev->ops = &pm860x_rtc_ops;
308 info->rtc_dev->range_max = U32_MAX;
309
310 ret = devm_rtc_register_device(info->rtc_dev);
311 if (ret)
312 return ret;
313
314 /*
315 * enable internal XO instead of internal 3.25MHz clock since it can
316 * free running in PMIC power-down state.
317 */
318 pm860x_set_bits(info->i2c, PM8607_RTC1, RTC1_USE_XO, RTC1_USE_XO);
319
320#ifdef VRTC_CALIBRATION
321 /* <00> -- 2.7V, <01> -- 2.9V, <10> -- 3.1V, <11> -- 3.3V */
322 pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, MEAS2_VRTC);
323
324 /* calibrate VRTC */
325 INIT_DELAYED_WORK(&info->calib_work, calibrate_vrtc_work);
326 schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL);
327#endif /* VRTC_CALIBRATION */
328
329 device_init_wakeup(&pdev->dev, 1);
330
331 return 0;
332}
333
334static void pm860x_rtc_remove(struct platform_device *pdev)
335{
336 struct pm860x_rtc_info *info = platform_get_drvdata(pdev);
337
338#ifdef VRTC_CALIBRATION
339 cancel_delayed_work_sync(&info->calib_work);
340 /* disable measurement */
341 pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, 0);
342#endif /* VRTC_CALIBRATION */
343}
344
345#ifdef CONFIG_PM_SLEEP
346static int pm860x_rtc_suspend(struct device *dev)
347{
348 struct platform_device *pdev = to_platform_device(dev);
349 struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
350
351 if (device_may_wakeup(dev))
352 chip->wakeup_flag |= 1 << PM8607_IRQ_RTC;
353 return 0;
354}
355static int pm860x_rtc_resume(struct device *dev)
356{
357 struct platform_device *pdev = to_platform_device(dev);
358 struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
359
360 if (device_may_wakeup(dev))
361 chip->wakeup_flag &= ~(1 << PM8607_IRQ_RTC);
362 return 0;
363}
364#endif
365
366static SIMPLE_DEV_PM_OPS(pm860x_rtc_pm_ops, pm860x_rtc_suspend, pm860x_rtc_resume);
367
368static struct platform_driver pm860x_rtc_driver = {
369 .driver = {
370 .name = "88pm860x-rtc",
371 .pm = &pm860x_rtc_pm_ops,
372 },
373 .probe = pm860x_rtc_probe,
374 .remove_new = pm860x_rtc_remove,
375};
376
377module_platform_driver(pm860x_rtc_driver);
378
379MODULE_DESCRIPTION("Marvell 88PM860x RTC driver");
380MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
381MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Real Time Clock driver for Marvell 88PM860x PMIC
4 *
5 * Copyright (c) 2010 Marvell International Ltd.
6 * Author: Haojian Zhuang <haojian.zhuang@marvell.com>
7 */
8
9#include <linux/kernel.h>
10#include <linux/module.h>
11#include <linux/of.h>
12#include <linux/platform_device.h>
13#include <linux/slab.h>
14#include <linux/mutex.h>
15#include <linux/rtc.h>
16#include <linux/delay.h>
17#include <linux/mfd/core.h>
18#include <linux/mfd/88pm860x.h>
19
20#define VRTC_CALIBRATION
21
22struct pm860x_rtc_info {
23 struct pm860x_chip *chip;
24 struct i2c_client *i2c;
25 struct rtc_device *rtc_dev;
26 struct device *dev;
27 struct delayed_work calib_work;
28
29 int irq;
30 int vrtc;
31 int (*sync)(unsigned int ticks);
32};
33
34#define REG_VRTC_MEAS1 0x7D
35
36#define REG0_ADDR 0xB0
37#define REG1_ADDR 0xB2
38#define REG2_ADDR 0xB4
39#define REG3_ADDR 0xB6
40
41#define REG0_DATA 0xB1
42#define REG1_DATA 0xB3
43#define REG2_DATA 0xB5
44#define REG3_DATA 0xB7
45
46/* bit definitions of Measurement Enable Register 2 (0x51) */
47#define MEAS2_VRTC (1 << 0)
48
49/* bit definitions of RTC Register 1 (0xA0) */
50#define ALARM_EN (1 << 3)
51#define ALARM_WAKEUP (1 << 4)
52#define ALARM (1 << 5)
53#define RTC1_USE_XO (1 << 7)
54
55#define VRTC_CALIB_INTERVAL (HZ * 60 * 10) /* 10 minutes */
56
57static irqreturn_t rtc_update_handler(int irq, void *data)
58{
59 struct pm860x_rtc_info *info = (struct pm860x_rtc_info *)data;
60 int mask;
61
62 mask = ALARM | ALARM_WAKEUP;
63 pm860x_set_bits(info->i2c, PM8607_RTC1, mask | ALARM_EN, mask);
64 rtc_update_irq(info->rtc_dev, 1, RTC_AF);
65 return IRQ_HANDLED;
66}
67
68static int pm860x_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
69{
70 struct pm860x_rtc_info *info = dev_get_drvdata(dev);
71
72 if (enabled)
73 pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, ALARM_EN);
74 else
75 pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, 0);
76 return 0;
77}
78
79/*
80 * Calculate the next alarm time given the requested alarm time mask
81 * and the current time.
82 */
83static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
84 struct rtc_time *alrm)
85{
86 unsigned long next_time;
87 unsigned long now_time;
88
89 next->tm_year = now->tm_year;
90 next->tm_mon = now->tm_mon;
91 next->tm_mday = now->tm_mday;
92 next->tm_hour = alrm->tm_hour;
93 next->tm_min = alrm->tm_min;
94 next->tm_sec = alrm->tm_sec;
95
96 rtc_tm_to_time(now, &now_time);
97 rtc_tm_to_time(next, &next_time);
98
99 if (next_time < now_time) {
100 /* Advance one day */
101 next_time += 60 * 60 * 24;
102 rtc_time_to_tm(next_time, next);
103 }
104}
105
106static int pm860x_rtc_read_time(struct device *dev, struct rtc_time *tm)
107{
108 struct pm860x_rtc_info *info = dev_get_drvdata(dev);
109 unsigned char buf[8];
110 unsigned long ticks, base, data;
111
112 pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
113 dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
114 buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
115 base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
116 (buf[5] << 8) | buf[7];
117
118 /* load 32-bit read-only counter */
119 pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
120 data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
121 (buf[1] << 8) | buf[0];
122 ticks = base + data;
123 dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
124 base, data, ticks);
125
126 rtc_time_to_tm(ticks, tm);
127
128 return 0;
129}
130
131static int pm860x_rtc_set_time(struct device *dev, struct rtc_time *tm)
132{
133 struct pm860x_rtc_info *info = dev_get_drvdata(dev);
134 unsigned char buf[4];
135 unsigned long ticks, base, data;
136
137 if (tm->tm_year > 206) {
138 dev_dbg(info->dev, "Set time %d out of range. "
139 "Please set time between 1970 to 2106.\n",
140 1900 + tm->tm_year);
141 return -EINVAL;
142 }
143 rtc_tm_to_time(tm, &ticks);
144
145 /* load 32-bit read-only counter */
146 pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
147 data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
148 (buf[1] << 8) | buf[0];
149 base = ticks - data;
150 dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
151 base, data, ticks);
152
153 pm860x_page_reg_write(info->i2c, REG0_DATA, (base >> 24) & 0xFF);
154 pm860x_page_reg_write(info->i2c, REG1_DATA, (base >> 16) & 0xFF);
155 pm860x_page_reg_write(info->i2c, REG2_DATA, (base >> 8) & 0xFF);
156 pm860x_page_reg_write(info->i2c, REG3_DATA, base & 0xFF);
157
158 if (info->sync)
159 info->sync(ticks);
160 return 0;
161}
162
163static int pm860x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
164{
165 struct pm860x_rtc_info *info = dev_get_drvdata(dev);
166 unsigned char buf[8];
167 unsigned long ticks, base, data;
168 int ret;
169
170 pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
171 dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
172 buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
173 base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
174 (buf[5] << 8) | buf[7];
175
176 pm860x_bulk_read(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
177 data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
178 (buf[1] << 8) | buf[0];
179 ticks = base + data;
180 dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
181 base, data, ticks);
182
183 rtc_time_to_tm(ticks, &alrm->time);
184 ret = pm860x_reg_read(info->i2c, PM8607_RTC1);
185 alrm->enabled = (ret & ALARM_EN) ? 1 : 0;
186 alrm->pending = (ret & (ALARM | ALARM_WAKEUP)) ? 1 : 0;
187 return 0;
188}
189
190static int pm860x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
191{
192 struct pm860x_rtc_info *info = dev_get_drvdata(dev);
193 struct rtc_time now_tm, alarm_tm;
194 unsigned long ticks, base, data;
195 unsigned char buf[8];
196 int mask;
197
198 pm860x_set_bits(info->i2c, PM8607_RTC1, ALARM_EN, 0);
199
200 pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
201 dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
202 buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
203 base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
204 (buf[5] << 8) | buf[7];
205
206 /* load 32-bit read-only counter */
207 pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
208 data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
209 (buf[1] << 8) | buf[0];
210 ticks = base + data;
211 dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
212 base, data, ticks);
213
214 rtc_time_to_tm(ticks, &now_tm);
215 rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time);
216 /* get new ticks for alarm in 24 hours */
217 rtc_tm_to_time(&alarm_tm, &ticks);
218 data = ticks - base;
219
220 buf[0] = data & 0xff;
221 buf[1] = (data >> 8) & 0xff;
222 buf[2] = (data >> 16) & 0xff;
223 buf[3] = (data >> 24) & 0xff;
224 pm860x_bulk_write(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
225 if (alrm->enabled) {
226 mask = ALARM | ALARM_WAKEUP | ALARM_EN;
227 pm860x_set_bits(info->i2c, PM8607_RTC1, mask, mask);
228 } else {
229 mask = ALARM | ALARM_WAKEUP | ALARM_EN;
230 pm860x_set_bits(info->i2c, PM8607_RTC1, mask,
231 ALARM | ALARM_WAKEUP);
232 }
233 return 0;
234}
235
236static const struct rtc_class_ops pm860x_rtc_ops = {
237 .read_time = pm860x_rtc_read_time,
238 .set_time = pm860x_rtc_set_time,
239 .read_alarm = pm860x_rtc_read_alarm,
240 .set_alarm = pm860x_rtc_set_alarm,
241 .alarm_irq_enable = pm860x_rtc_alarm_irq_enable,
242};
243
244#ifdef VRTC_CALIBRATION
245static void calibrate_vrtc_work(struct work_struct *work)
246{
247 struct pm860x_rtc_info *info = container_of(work,
248 struct pm860x_rtc_info, calib_work.work);
249 unsigned char buf[2];
250 unsigned int sum, data, mean, vrtc_set;
251 int i;
252
253 for (i = 0, sum = 0; i < 16; i++) {
254 msleep(100);
255 pm860x_bulk_read(info->i2c, REG_VRTC_MEAS1, 2, buf);
256 data = (buf[0] << 4) | buf[1];
257 data = (data * 5400) >> 12; /* convert to mv */
258 sum += data;
259 }
260 mean = sum >> 4;
261 vrtc_set = 2700 + (info->vrtc & 0x3) * 200;
262 dev_dbg(info->dev, "mean:%d, vrtc_set:%d\n", mean, vrtc_set);
263
264 sum = pm860x_reg_read(info->i2c, PM8607_RTC_MISC1);
265 data = sum & 0x3;
266 if ((mean + 200) < vrtc_set) {
267 /* try higher voltage */
268 if (++data == 4)
269 goto out;
270 data = (sum & 0xf8) | (data & 0x3);
271 pm860x_reg_write(info->i2c, PM8607_RTC_MISC1, data);
272 } else if ((mean - 200) > vrtc_set) {
273 /* try lower voltage */
274 if (data-- == 0)
275 goto out;
276 data = (sum & 0xf8) | (data & 0x3);
277 pm860x_reg_write(info->i2c, PM8607_RTC_MISC1, data);
278 } else
279 goto out;
280 dev_dbg(info->dev, "set 0x%x to RTC_MISC1\n", data);
281 /* trigger next calibration since VRTC is updated */
282 schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL);
283 return;
284out:
285 /* disable measurement */
286 pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, 0);
287 dev_dbg(info->dev, "finish VRTC calibration\n");
288 return;
289}
290#endif
291
292#ifdef CONFIG_OF
293static int pm860x_rtc_dt_init(struct platform_device *pdev,
294 struct pm860x_rtc_info *info)
295{
296 struct device_node *np = pdev->dev.parent->of_node;
297 int ret;
298 if (!np)
299 return -ENODEV;
300 np = of_get_child_by_name(np, "rtc");
301 if (!np) {
302 dev_err(&pdev->dev, "failed to find rtc node\n");
303 return -ENODEV;
304 }
305 ret = of_property_read_u32(np, "marvell,88pm860x-vrtc", &info->vrtc);
306 if (ret)
307 info->vrtc = 0;
308 of_node_put(np);
309 return 0;
310}
311#else
312#define pm860x_rtc_dt_init(x, y) (-1)
313#endif
314
315static int pm860x_rtc_probe(struct platform_device *pdev)
316{
317 struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
318 struct pm860x_rtc_pdata *pdata = NULL;
319 struct pm860x_rtc_info *info;
320 struct rtc_time tm;
321 unsigned long ticks = 0;
322 int ret;
323
324 pdata = dev_get_platdata(&pdev->dev);
325
326 info = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_rtc_info),
327 GFP_KERNEL);
328 if (!info)
329 return -ENOMEM;
330 info->irq = platform_get_irq(pdev, 0);
331 if (info->irq < 0)
332 return info->irq;
333
334 info->chip = chip;
335 info->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
336 info->dev = &pdev->dev;
337 dev_set_drvdata(&pdev->dev, info);
338
339 ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
340 rtc_update_handler, IRQF_ONESHOT, "rtc",
341 info);
342 if (ret < 0) {
343 dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
344 info->irq, ret);
345 return ret;
346 }
347
348 /* set addresses of 32-bit base value for RTC time */
349 pm860x_page_reg_write(info->i2c, REG0_ADDR, REG0_DATA);
350 pm860x_page_reg_write(info->i2c, REG1_ADDR, REG1_DATA);
351 pm860x_page_reg_write(info->i2c, REG2_ADDR, REG2_DATA);
352 pm860x_page_reg_write(info->i2c, REG3_ADDR, REG3_DATA);
353
354 ret = pm860x_rtc_read_time(&pdev->dev, &tm);
355 if (ret < 0) {
356 dev_err(&pdev->dev, "Failed to read initial time.\n");
357 return ret;
358 }
359 if ((tm.tm_year < 70) || (tm.tm_year > 138)) {
360 tm.tm_year = 70;
361 tm.tm_mon = 0;
362 tm.tm_mday = 1;
363 tm.tm_hour = 0;
364 tm.tm_min = 0;
365 tm.tm_sec = 0;
366 ret = pm860x_rtc_set_time(&pdev->dev, &tm);
367 if (ret < 0) {
368 dev_err(&pdev->dev, "Failed to set initial time.\n");
369 return ret;
370 }
371 }
372 rtc_tm_to_time(&tm, &ticks);
373 if (pm860x_rtc_dt_init(pdev, info)) {
374 if (pdata && pdata->sync) {
375 pdata->sync(ticks);
376 info->sync = pdata->sync;
377 }
378 }
379
380 info->rtc_dev = devm_rtc_device_register(&pdev->dev, "88pm860x-rtc",
381 &pm860x_rtc_ops, THIS_MODULE);
382 ret = PTR_ERR(info->rtc_dev);
383 if (IS_ERR(info->rtc_dev)) {
384 dev_err(&pdev->dev, "Failed to register RTC device: %d\n", ret);
385 return ret;
386 }
387
388 /*
389 * enable internal XO instead of internal 3.25MHz clock since it can
390 * free running in PMIC power-down state.
391 */
392 pm860x_set_bits(info->i2c, PM8607_RTC1, RTC1_USE_XO, RTC1_USE_XO);
393
394#ifdef VRTC_CALIBRATION
395 /* <00> -- 2.7V, <01> -- 2.9V, <10> -- 3.1V, <11> -- 3.3V */
396 if (pm860x_rtc_dt_init(pdev, info)) {
397 if (pdata && pdata->vrtc)
398 info->vrtc = pdata->vrtc & 0x3;
399 else
400 info->vrtc = 1;
401 }
402 pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, MEAS2_VRTC);
403
404 /* calibrate VRTC */
405 INIT_DELAYED_WORK(&info->calib_work, calibrate_vrtc_work);
406 schedule_delayed_work(&info->calib_work, VRTC_CALIB_INTERVAL);
407#endif /* VRTC_CALIBRATION */
408
409 device_init_wakeup(&pdev->dev, 1);
410
411 return 0;
412}
413
414static int pm860x_rtc_remove(struct platform_device *pdev)
415{
416 struct pm860x_rtc_info *info = platform_get_drvdata(pdev);
417
418#ifdef VRTC_CALIBRATION
419 cancel_delayed_work_sync(&info->calib_work);
420 /* disable measurement */
421 pm860x_set_bits(info->i2c, PM8607_MEAS_EN2, MEAS2_VRTC, 0);
422#endif /* VRTC_CALIBRATION */
423
424 return 0;
425}
426
427#ifdef CONFIG_PM_SLEEP
428static int pm860x_rtc_suspend(struct device *dev)
429{
430 struct platform_device *pdev = to_platform_device(dev);
431 struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
432
433 if (device_may_wakeup(dev))
434 chip->wakeup_flag |= 1 << PM8607_IRQ_RTC;
435 return 0;
436}
437static int pm860x_rtc_resume(struct device *dev)
438{
439 struct platform_device *pdev = to_platform_device(dev);
440 struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
441
442 if (device_may_wakeup(dev))
443 chip->wakeup_flag &= ~(1 << PM8607_IRQ_RTC);
444 return 0;
445}
446#endif
447
448static SIMPLE_DEV_PM_OPS(pm860x_rtc_pm_ops, pm860x_rtc_suspend, pm860x_rtc_resume);
449
450static struct platform_driver pm860x_rtc_driver = {
451 .driver = {
452 .name = "88pm860x-rtc",
453 .pm = &pm860x_rtc_pm_ops,
454 },
455 .probe = pm860x_rtc_probe,
456 .remove = pm860x_rtc_remove,
457};
458
459module_platform_driver(pm860x_rtc_driver);
460
461MODULE_DESCRIPTION("Marvell 88PM860x RTC driver");
462MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
463MODULE_LICENSE("GPL");