Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/* Low-level parallel port routines for the Amiga built-in port
3 *
4 * Author: Joerg Dorchain <joerg@dorchain.net>
5 *
6 * This is a complete rewrite of the code, but based heaviy upon the old
7 * lp_intern. code.
8 *
9 * The built-in Amiga parallel port provides one port at a fixed address
10 * with 8 bidirectional data lines (D0 - D7) and 3 bidirectional status
11 * lines (BUSY, POUT, SEL), 1 output control line /STROBE (raised automatically
12 * in hardware when the data register is accessed), and 1 input control line
13 * /ACK, able to cause an interrupt, but both not directly settable by
14 * software.
15 */
16
17#include <linux/module.h>
18#include <linux/init.h>
19#include <linux/parport.h>
20#include <linux/ioport.h>
21#include <linux/interrupt.h>
22#include <linux/platform_device.h>
23
24#include <asm/setup.h>
25#include <asm/amigahw.h>
26#include <asm/irq.h>
27#include <asm/io.h>
28#include <asm/amigaints.h>
29
30#undef DEBUG
31
32static void amiga_write_data(struct parport *p, unsigned char data)
33{
34 pr_debug("write_data %c\n", data);
35 /* Triggers also /STROBE. This behavior cannot be changed */
36 ciaa.prb = data;
37 mb();
38}
39
40static unsigned char amiga_read_data(struct parport *p)
41{
42 /* Triggers also /STROBE. This behavior cannot be changed */
43 return ciaa.prb;
44}
45
46static unsigned char control_amiga_to_pc(unsigned char control)
47{
48 return PARPORT_CONTROL_SELECT |
49 PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_STROBE;
50 /* fake value: interrupt enable, select in, no reset,
51 no autolf, no strobe - seems to be closest the wiring diagram */
52}
53
54static void amiga_write_control(struct parport *p, unsigned char control)
55{
56 pr_debug("write_control %02x\n", control);
57 /* No implementation possible */
58}
59
60static unsigned char amiga_read_control( struct parport *p)
61{
62 pr_debug("read_control\n");
63 return control_amiga_to_pc(0);
64}
65
66static unsigned char amiga_frob_control( struct parport *p, unsigned char mask, unsigned char val)
67{
68 unsigned char old;
69
70 pr_debug("frob_control mask %02x, value %02x\n", mask, val);
71 old = amiga_read_control(p);
72 amiga_write_control(p, (old & ~mask) ^ val);
73 return old;
74}
75
76static unsigned char status_amiga_to_pc(unsigned char status)
77{
78 unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR;
79
80 if (status & 1) /* Busy */
81 ret &= ~PARPORT_STATUS_BUSY;
82 if (status & 2) /* PaperOut */
83 ret |= PARPORT_STATUS_PAPEROUT;
84 if (status & 4) /* Selected */
85 ret |= PARPORT_STATUS_SELECT;
86 /* the rest is not connected or handled autonomously in hardware */
87
88 return ret;
89}
90
91static unsigned char amiga_read_status(struct parport *p)
92{
93 unsigned char status;
94
95 status = status_amiga_to_pc(ciab.pra & 7);
96 pr_debug("read_status %02x\n", status);
97 return status;
98}
99
100static void amiga_enable_irq(struct parport *p)
101{
102 enable_irq(IRQ_AMIGA_CIAA_FLG);
103}
104
105static void amiga_disable_irq(struct parport *p)
106{
107 disable_irq(IRQ_AMIGA_CIAA_FLG);
108}
109
110static void amiga_data_forward(struct parport *p)
111{
112 pr_debug("forward\n");
113 ciaa.ddrb = 0xff; /* all pins output */
114 mb();
115}
116
117static void amiga_data_reverse(struct parport *p)
118{
119 pr_debug("reverse\n");
120 ciaa.ddrb = 0; /* all pins input */
121 mb();
122}
123
124static void amiga_init_state(struct pardevice *dev, struct parport_state *s)
125{
126 s->u.amiga.data = 0;
127 s->u.amiga.datadir = 255;
128 s->u.amiga.status = 0;
129 s->u.amiga.statusdir = 0;
130}
131
132static void amiga_save_state(struct parport *p, struct parport_state *s)
133{
134 mb();
135 s->u.amiga.data = ciaa.prb;
136 s->u.amiga.datadir = ciaa.ddrb;
137 s->u.amiga.status = ciab.pra & 7;
138 s->u.amiga.statusdir = ciab.ddra & 7;
139 mb();
140}
141
142static void amiga_restore_state(struct parport *p, struct parport_state *s)
143{
144 mb();
145 ciaa.prb = s->u.amiga.data;
146 ciaa.ddrb = s->u.amiga.datadir;
147 ciab.pra |= (ciab.pra & 0xf8) | s->u.amiga.status;
148 ciab.ddra |= (ciab.ddra & 0xf8) | s->u.amiga.statusdir;
149 mb();
150}
151
152static struct parport_operations pp_amiga_ops = {
153 .write_data = amiga_write_data,
154 .read_data = amiga_read_data,
155
156 .write_control = amiga_write_control,
157 .read_control = amiga_read_control,
158 .frob_control = amiga_frob_control,
159
160 .read_status = amiga_read_status,
161
162 .enable_irq = amiga_enable_irq,
163 .disable_irq = amiga_disable_irq,
164
165 .data_forward = amiga_data_forward,
166 .data_reverse = amiga_data_reverse,
167
168 .init_state = amiga_init_state,
169 .save_state = amiga_save_state,
170 .restore_state = amiga_restore_state,
171
172 .epp_write_data = parport_ieee1284_epp_write_data,
173 .epp_read_data = parport_ieee1284_epp_read_data,
174 .epp_write_addr = parport_ieee1284_epp_write_addr,
175 .epp_read_addr = parport_ieee1284_epp_read_addr,
176
177 .ecp_write_data = parport_ieee1284_ecp_write_data,
178 .ecp_read_data = parport_ieee1284_ecp_read_data,
179 .ecp_write_addr = parport_ieee1284_ecp_write_addr,
180
181 .compat_write_data = parport_ieee1284_write_compat,
182 .nibble_read_data = parport_ieee1284_read_nibble,
183 .byte_read_data = parport_ieee1284_read_byte,
184
185 .owner = THIS_MODULE,
186};
187
188/* ----------- Initialisation code --------------------------------- */
189
190static int __init amiga_parallel_probe(struct platform_device *pdev)
191{
192 struct parport *p;
193 int err;
194
195 ciaa.ddrb = 0xff;
196 ciab.ddra &= 0xf8;
197 mb();
198
199 p = parport_register_port((unsigned long)&ciaa.prb, IRQ_AMIGA_CIAA_FLG,
200 PARPORT_DMA_NONE, &pp_amiga_ops);
201 if (!p)
202 return -EBUSY;
203
204 err = request_irq(IRQ_AMIGA_CIAA_FLG, parport_irq_handler, 0, p->name,
205 p);
206 if (err)
207 goto out_irq;
208
209 pr_info("%s: Amiga built-in port using irq\n", p->name);
210 /* XXX: set operating mode */
211 parport_announce_port(p);
212
213 platform_set_drvdata(pdev, p);
214
215 return 0;
216
217out_irq:
218 parport_put_port(p);
219 return err;
220}
221
222static int __exit amiga_parallel_remove(struct platform_device *pdev)
223{
224 struct parport *port = platform_get_drvdata(pdev);
225
226 parport_remove_port(port);
227 if (port->irq != PARPORT_IRQ_NONE)
228 free_irq(IRQ_AMIGA_CIAA_FLG, port);
229 parport_put_port(port);
230 return 0;
231}
232
233static struct platform_driver amiga_parallel_driver = {
234 .remove = __exit_p(amiga_parallel_remove),
235 .driver = {
236 .name = "amiga-parallel",
237 },
238};
239
240module_platform_driver_probe(amiga_parallel_driver, amiga_parallel_probe);
241
242MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
243MODULE_DESCRIPTION("Parport Driver for Amiga builtin Port");
244MODULE_LICENSE("GPL");
245MODULE_ALIAS("platform:amiga-parallel");
1// SPDX-License-Identifier: GPL-2.0-only
2/* Low-level parallel port routines for the Amiga built-in port
3 *
4 * Author: Joerg Dorchain <joerg@dorchain.net>
5 *
6 * This is a complete rewrite of the code, but based heaviy upon the old
7 * lp_intern. code.
8 *
9 * The built-in Amiga parallel port provides one port at a fixed address
10 * with 8 bidirectional data lines (D0 - D7) and 3 bidirectional status
11 * lines (BUSY, POUT, SEL), 1 output control line /STROBE (raised automatically
12 * in hardware when the data register is accessed), and 1 input control line
13 * /ACK, able to cause an interrupt, but both not directly settable by
14 * software.
15 */
16
17#include <linux/module.h>
18#include <linux/init.h>
19#include <linux/parport.h>
20#include <linux/ioport.h>
21#include <linux/interrupt.h>
22#include <linux/platform_device.h>
23
24#include <asm/setup.h>
25#include <asm/amigahw.h>
26#include <asm/irq.h>
27#include <asm/io.h>
28#include <asm/amigaints.h>
29
30#undef DEBUG
31#ifdef DEBUG
32#define DPRINTK printk
33#else
34#define DPRINTK(x...) do { } while (0)
35#endif
36
37
38static void amiga_write_data(struct parport *p, unsigned char data)
39{
40 DPRINTK(KERN_DEBUG "write_data %c\n",data);
41 /* Triggers also /STROBE. This behavior cannot be changed */
42 ciaa.prb = data;
43 mb();
44}
45
46static unsigned char amiga_read_data(struct parport *p)
47{
48 /* Triggers also /STROBE. This behavior cannot be changed */
49 return ciaa.prb;
50}
51
52static unsigned char control_amiga_to_pc(unsigned char control)
53{
54 return PARPORT_CONTROL_SELECT |
55 PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_STROBE;
56 /* fake value: interrupt enable, select in, no reset,
57 no autolf, no strobe - seems to be closest the wiring diagram */
58}
59
60static void amiga_write_control(struct parport *p, unsigned char control)
61{
62 DPRINTK(KERN_DEBUG "write_control %02x\n",control);
63 /* No implementation possible */
64}
65
66static unsigned char amiga_read_control( struct parport *p)
67{
68 DPRINTK(KERN_DEBUG "read_control \n");
69 return control_amiga_to_pc(0);
70}
71
72static unsigned char amiga_frob_control( struct parport *p, unsigned char mask, unsigned char val)
73{
74 unsigned char old;
75
76 DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val);
77 old = amiga_read_control(p);
78 amiga_write_control(p, (old & ~mask) ^ val);
79 return old;
80}
81
82static unsigned char status_amiga_to_pc(unsigned char status)
83{
84 unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR;
85
86 if (status & 1) /* Busy */
87 ret &= ~PARPORT_STATUS_BUSY;
88 if (status & 2) /* PaperOut */
89 ret |= PARPORT_STATUS_PAPEROUT;
90 if (status & 4) /* Selected */
91 ret |= PARPORT_STATUS_SELECT;
92 /* the rest is not connected or handled autonomously in hardware */
93
94 return ret;
95}
96
97static unsigned char amiga_read_status(struct parport *p)
98{
99 unsigned char status;
100
101 status = status_amiga_to_pc(ciab.pra & 7);
102 DPRINTK(KERN_DEBUG "read_status %02x\n", status);
103 return status;
104}
105
106static void amiga_enable_irq(struct parport *p)
107{
108 enable_irq(IRQ_AMIGA_CIAA_FLG);
109}
110
111static void amiga_disable_irq(struct parport *p)
112{
113 disable_irq(IRQ_AMIGA_CIAA_FLG);
114}
115
116static void amiga_data_forward(struct parport *p)
117{
118 DPRINTK(KERN_DEBUG "forward\n");
119 ciaa.ddrb = 0xff; /* all pins output */
120 mb();
121}
122
123static void amiga_data_reverse(struct parport *p)
124{
125 DPRINTK(KERN_DEBUG "reverse\n");
126 ciaa.ddrb = 0; /* all pins input */
127 mb();
128}
129
130static void amiga_init_state(struct pardevice *dev, struct parport_state *s)
131{
132 s->u.amiga.data = 0;
133 s->u.amiga.datadir = 255;
134 s->u.amiga.status = 0;
135 s->u.amiga.statusdir = 0;
136}
137
138static void amiga_save_state(struct parport *p, struct parport_state *s)
139{
140 mb();
141 s->u.amiga.data = ciaa.prb;
142 s->u.amiga.datadir = ciaa.ddrb;
143 s->u.amiga.status = ciab.pra & 7;
144 s->u.amiga.statusdir = ciab.ddra & 7;
145 mb();
146}
147
148static void amiga_restore_state(struct parport *p, struct parport_state *s)
149{
150 mb();
151 ciaa.prb = s->u.amiga.data;
152 ciaa.ddrb = s->u.amiga.datadir;
153 ciab.pra |= (ciab.pra & 0xf8) | s->u.amiga.status;
154 ciab.ddra |= (ciab.ddra & 0xf8) | s->u.amiga.statusdir;
155 mb();
156}
157
158static struct parport_operations pp_amiga_ops = {
159 .write_data = amiga_write_data,
160 .read_data = amiga_read_data,
161
162 .write_control = amiga_write_control,
163 .read_control = amiga_read_control,
164 .frob_control = amiga_frob_control,
165
166 .read_status = amiga_read_status,
167
168 .enable_irq = amiga_enable_irq,
169 .disable_irq = amiga_disable_irq,
170
171 .data_forward = amiga_data_forward,
172 .data_reverse = amiga_data_reverse,
173
174 .init_state = amiga_init_state,
175 .save_state = amiga_save_state,
176 .restore_state = amiga_restore_state,
177
178 .epp_write_data = parport_ieee1284_epp_write_data,
179 .epp_read_data = parport_ieee1284_epp_read_data,
180 .epp_write_addr = parport_ieee1284_epp_write_addr,
181 .epp_read_addr = parport_ieee1284_epp_read_addr,
182
183 .ecp_write_data = parport_ieee1284_ecp_write_data,
184 .ecp_read_data = parport_ieee1284_ecp_read_data,
185 .ecp_write_addr = parport_ieee1284_ecp_write_addr,
186
187 .compat_write_data = parport_ieee1284_write_compat,
188 .nibble_read_data = parport_ieee1284_read_nibble,
189 .byte_read_data = parport_ieee1284_read_byte,
190
191 .owner = THIS_MODULE,
192};
193
194/* ----------- Initialisation code --------------------------------- */
195
196static int __init amiga_parallel_probe(struct platform_device *pdev)
197{
198 struct parport *p;
199 int err;
200
201 ciaa.ddrb = 0xff;
202 ciab.ddra &= 0xf8;
203 mb();
204
205 p = parport_register_port((unsigned long)&ciaa.prb, IRQ_AMIGA_CIAA_FLG,
206 PARPORT_DMA_NONE, &pp_amiga_ops);
207 if (!p)
208 return -EBUSY;
209
210 err = request_irq(IRQ_AMIGA_CIAA_FLG, parport_irq_handler, 0, p->name,
211 p);
212 if (err)
213 goto out_irq;
214
215 printk(KERN_INFO "%s: Amiga built-in port using irq\n", p->name);
216 /* XXX: set operating mode */
217 parport_announce_port(p);
218
219 platform_set_drvdata(pdev, p);
220
221 return 0;
222
223out_irq:
224 parport_put_port(p);
225 return err;
226}
227
228static int __exit amiga_parallel_remove(struct platform_device *pdev)
229{
230 struct parport *port = platform_get_drvdata(pdev);
231
232 parport_remove_port(port);
233 if (port->irq != PARPORT_IRQ_NONE)
234 free_irq(IRQ_AMIGA_CIAA_FLG, port);
235 parport_put_port(port);
236 return 0;
237}
238
239static struct platform_driver amiga_parallel_driver = {
240 .remove = __exit_p(amiga_parallel_remove),
241 .driver = {
242 .name = "amiga-parallel",
243 },
244};
245
246module_platform_driver_probe(amiga_parallel_driver, amiga_parallel_probe);
247
248MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
249MODULE_DESCRIPTION("Parport Driver for Amiga builtin Port");
250MODULE_SUPPORTED_DEVICE("Amiga builtin Parallel Port");
251MODULE_LICENSE("GPL");
252MODULE_ALIAS("platform:amiga-parallel");