Linux Audio

Check our new training course

Embedded Linux training

Mar 10-20, 2025, special US time zones
Register
Loading...
Note: File does not exist in v6.8.
  1/* SPDX-License-Identifier: GPL-2.0-only */
  2/*
  3 *  Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
  4 *  Copyright (C) 2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
  5 *  Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
  6 */
  7
  8#if !defined(_ISL_OID_H)
  9#define _ISL_OID_H
 10
 11/*
 12 * MIB related constant and structure definitions for communicating
 13 * with the device firmware
 14 */
 15
 16struct obj_ssid {
 17	u8 length;
 18	char octets[33];
 19} __packed;
 20
 21struct obj_key {
 22	u8 type;		/* dot11_priv_t */
 23	u8 length;
 24	char key[32];
 25} __packed;
 26
 27struct obj_mlme {
 28	u8 address[6];
 29	u16 id;
 30	u16 state;
 31	u16 code;
 32} __packed;
 33
 34struct obj_mlmeex {
 35	u8 address[6];
 36	u16 id;
 37	u16 state;
 38	u16 code;
 39	u16 size;
 40	u8 data[0];
 41} __packed;
 42
 43struct obj_buffer {
 44	u32 size;
 45	u32 addr;		/* 32bit bus address */
 46} __packed;
 47
 48struct obj_bss {
 49	u8 address[6];
 50	int:16;			/* padding */
 51
 52	char state;
 53	char reserved;
 54	short age;
 55
 56	char quality;
 57	char rssi;
 58
 59	struct obj_ssid ssid;
 60	short channel;
 61	char beacon_period;
 62	char dtim_period;
 63	short capinfo;
 64	short rates;
 65	short basic_rates;
 66	int:16;			/* padding */
 67} __packed;
 68
 69struct obj_bsslist {
 70	u32 nr;
 71	struct obj_bss bsslist[0];
 72} __packed;
 73
 74struct obj_frequencies {
 75	u16 nr;
 76	u16 mhz[0];
 77} __packed;
 78
 79struct obj_attachment {
 80	char type;
 81	char reserved;
 82	short id;
 83	short size;
 84	char data[0];
 85} __packed;
 86
 87/*
 88 * in case everything's ok, the inlined function below will be
 89 * optimized away by the compiler...
 90 */
 91static inline void
 92__bug_on_wrong_struct_sizes(void)
 93{
 94	BUILD_BUG_ON(sizeof (struct obj_ssid) != 34);
 95	BUILD_BUG_ON(sizeof (struct obj_key) != 34);
 96	BUILD_BUG_ON(sizeof (struct obj_mlme) != 12);
 97	BUILD_BUG_ON(sizeof (struct obj_mlmeex) != 14);
 98	BUILD_BUG_ON(sizeof (struct obj_buffer) != 8);
 99	BUILD_BUG_ON(sizeof (struct obj_bss) != 60);
100	BUILD_BUG_ON(sizeof (struct obj_bsslist) != 4);
101	BUILD_BUG_ON(sizeof (struct obj_frequencies) != 2);
102}
103
104enum dot11_state_t {
105	DOT11_STATE_NONE = 0,
106	DOT11_STATE_AUTHING = 1,
107	DOT11_STATE_AUTH = 2,
108	DOT11_STATE_ASSOCING = 3,
109
110	DOT11_STATE_ASSOC = 5,
111	DOT11_STATE_IBSS = 6,
112	DOT11_STATE_WDS = 7
113};
114
115enum dot11_bsstype_t {
116	DOT11_BSSTYPE_NONE = 0,
117	DOT11_BSSTYPE_INFRA = 1,
118	DOT11_BSSTYPE_IBSS = 2,
119	DOT11_BSSTYPE_ANY = 3
120};
121
122enum dot11_auth_t {
123	DOT11_AUTH_NONE = 0,
124	DOT11_AUTH_OS = 1,
125	DOT11_AUTH_SK = 2,
126	DOT11_AUTH_BOTH = 3
127};
128
129enum dot11_mlme_t {
130	DOT11_MLME_AUTO = 0,
131	DOT11_MLME_INTERMEDIATE = 1,
132	DOT11_MLME_EXTENDED = 2
133};
134
135enum dot11_priv_t {
136	DOT11_PRIV_WEP = 0,
137	DOT11_PRIV_TKIP = 1
138};
139
140/* Prism "Nitro" / Frameburst / "Packet Frame Grouping"
141 * Value is in microseconds. Represents the # microseconds
142 * the firmware will take to group frames before sending out then out
143 * together with a CSMA contention. Without this all frames are
144 * sent with a CSMA contention.
145 * Bibliography:
146 * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Papers/Packet.Frame.Grouping.html
147 */
148enum dot11_maxframeburst_t {
149	/* Values for DOT11_OID_MAXFRAMEBURST */
150	DOT11_MAXFRAMEBURST_OFF = 0, /* Card firmware default */
151	DOT11_MAXFRAMEBURST_MIXED_SAFE = 650, /* 802.11 a,b,g safe */
152	DOT11_MAXFRAMEBURST_IDEAL = 1300, /* Theoretical ideal level */
153	DOT11_MAXFRAMEBURST_MAX = 5000, /* Use this as max,
154		* Note: firmware allows for greater values. This is a
155		* recommended max. I'll update this as I find
156		* out what the real MAX is. Also note that you don't necessarily
157		* get better results with a greater value here.
158		*/
159};
160
161/* Support for 802.11 long and short frame preambles.
162 * Long	 preamble uses 128-bit sync field, 8-bit  CRC
163 * Short preamble uses 56-bit  sync field, 16-bit CRC
164 *
165 * 802.11a -- not sure, both optionally ?
166 * 802.11b supports long and optionally short
167 * 802.11g supports both */
168enum dot11_preamblesettings_t {
169	DOT11_PREAMBLESETTING_LONG = 0,
170		/* Allows *only* long 802.11 preambles */
171	DOT11_PREAMBLESETTING_SHORT = 1,
172		/* Allows *only* short 802.11 preambles */
173	DOT11_PREAMBLESETTING_DYNAMIC = 2
174		/* AutomatiGically set */
175};
176
177/* Support for 802.11 slot timing (time between packets).
178 *
179 * Long uses 802.11a slot timing  (9 usec ?)
180 * Short uses 802.11b slot timing (20 use ?) */
181enum dot11_slotsettings_t {
182	DOT11_SLOTSETTINGS_LONG = 0,
183		/* Allows *only* long 802.11b slot timing */
184	DOT11_SLOTSETTINGS_SHORT = 1,
185		/* Allows *only* long 802.11a slot timing */
186	DOT11_SLOTSETTINGS_DYNAMIC = 2
187		/* AutomatiGically set */
188};
189
190/* All you need to know, ERP is "Extended Rate PHY".
191 * An Extended Rate PHY (ERP) STA or AP shall support three different
192 * preamble and header formats:
193 * Long  preamble (refer to above)
194 * Short preamble (refer to above)
195 * OFDM  preamble ( ? )
196 *
197 * I'm assuming here Protection tells the AP
198 * to be careful, a STA which cannot handle the long pre-amble
199 * has joined.
200 */
201enum do11_nonerpstatus_t {
202	DOT11_ERPSTAT_NONEPRESENT = 0,
203	DOT11_ERPSTAT_USEPROTECTION = 1
204};
205
206/* (ERP is "Extended Rate PHY") Way to read NONERP is NON-ERP-*
207 * The key here is DOT11 NON ERP NEVER protects against
208 * NON ERP STA's. You *don't* want this unless
209 * you know what you are doing. It means you will only
210 * get Extended Rate capabilities */
211enum dot11_nonerpprotection_t {
212	DOT11_NONERP_NEVER = 0,
213	DOT11_NONERP_ALWAYS = 1,
214	DOT11_NONERP_DYNAMIC = 2
215};
216
217/* Preset OID configuration for 802.11 modes
218 * Note: DOT11_OID_CW[MIN|MAX] hold the values of the
219 * DCS MIN|MAX backoff used */
220enum dot11_profile_t { /* And set/allowed values */
221	/* Allowed values for DOT11_OID_PROFILES */
222	DOT11_PROFILE_B_ONLY = 0,
223		/* DOT11_OID_RATES: 1, 2, 5.5, 11Mbps
224		 * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC
225		 * DOT11_OID_CWMIN: 31
226		 * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC
227		 * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_LONG
228		 */
229	DOT11_PROFILE_MIXED_G_WIFI = 1,
230		/* DOT11_OID_RATES: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54Mbs
231		 * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC
232		 * DOT11_OID_CWMIN: 15
233		 * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC
234		 * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_DYNAMIC
235		 */
236	DOT11_PROFILE_MIXED_LONG = 2, /* "Long range" */
237		/* Same as Profile MIXED_G_WIFI */
238	DOT11_PROFILE_G_ONLY = 3,
239		/* Same as Profile MIXED_G_WIFI */
240	DOT11_PROFILE_TEST = 4,
241		/* Same as Profile MIXED_G_WIFI except:
242		 * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_SHORT
243		 * DOT11_OID_NONEPROTECTION: DOT11_NOERP_NEVER
244		 * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_SHORT
245		 */
246	DOT11_PROFILE_B_WIFI = 5,
247		/* Same as Profile B_ONLY */
248	DOT11_PROFILE_A_ONLY = 6,
249		/* Same as Profile MIXED_G_WIFI except:
250		 * DOT11_OID_RATES: 6, 9, 12, 18, 24, 36, 48, 54Mbs
251		 */
252	DOT11_PROFILE_MIXED_SHORT = 7
253		/* Same as MIXED_G_WIFI */
254};
255
256
257/* The dot11d conformance level configures the 802.11d conformance levels.
258 * The following conformance levels exist:*/
259enum oid_inl_conformance_t {
260	OID_INL_CONFORMANCE_NONE = 0,	/* Perform active scanning */
261	OID_INL_CONFORMANCE_STRICT = 1,	/* Strictly adhere to 802.11d */
262	OID_INL_CONFORMANCE_FLEXIBLE = 2,	/* Use passed 802.11d info to
263		* determine channel AND/OR just make assumption that active
264		* channels are valid  channels */
265};
266
267enum oid_inl_mode_t {
268	INL_MODE_NONE = -1,
269	INL_MODE_PROMISCUOUS = 0,
270	INL_MODE_CLIENT = 1,
271	INL_MODE_AP = 2,
272	INL_MODE_SNIFFER = 3
273};
274
275enum oid_inl_config_t {
276	INL_CONFIG_NOTHING = 0x00,
277	INL_CONFIG_MANUALRUN = 0x01,
278	INL_CONFIG_FRAMETRAP = 0x02,
279	INL_CONFIG_RXANNEX = 0x04,
280	INL_CONFIG_TXANNEX = 0x08,
281	INL_CONFIG_WDS = 0x10
282};
283
284enum oid_inl_phycap_t {
285	INL_PHYCAP_2400MHZ = 1,
286	INL_PHYCAP_5000MHZ = 2,
287	INL_PHYCAP_FAA = 0x80000000,	/* Means card supports the FAA switch */
288};
289
290
291enum oid_num_t {
292	GEN_OID_MACADDRESS = 0,
293	GEN_OID_LINKSTATE,
294	GEN_OID_WATCHDOG,
295	GEN_OID_MIBOP,
296	GEN_OID_OPTIONS,
297	GEN_OID_LEDCONFIG,
298
299	/* 802.11 */
300	DOT11_OID_BSSTYPE,
301	DOT11_OID_BSSID,
302	DOT11_OID_SSID,
303	DOT11_OID_STATE,
304	DOT11_OID_AID,
305	DOT11_OID_COUNTRYSTRING,
306	DOT11_OID_SSIDOVERRIDE,
307
308	DOT11_OID_MEDIUMLIMIT,
309	DOT11_OID_BEACONPERIOD,
310	DOT11_OID_DTIMPERIOD,
311	DOT11_OID_ATIMWINDOW,
312	DOT11_OID_LISTENINTERVAL,
313	DOT11_OID_CFPPERIOD,
314	DOT11_OID_CFPDURATION,
315
316	DOT11_OID_AUTHENABLE,
317	DOT11_OID_PRIVACYINVOKED,
318	DOT11_OID_EXUNENCRYPTED,
319	DOT11_OID_DEFKEYID,
320	DOT11_OID_DEFKEYX,	/* DOT11_OID_DEFKEY1,...DOT11_OID_DEFKEY4 */
321	DOT11_OID_STAKEY,
322	DOT11_OID_REKEYTHRESHOLD,
323	DOT11_OID_STASC,
324
325	DOT11_OID_PRIVTXREJECTED,
326	DOT11_OID_PRIVRXPLAIN,
327	DOT11_OID_PRIVRXFAILED,
328	DOT11_OID_PRIVRXNOKEY,
329
330	DOT11_OID_RTSTHRESH,
331	DOT11_OID_FRAGTHRESH,
332	DOT11_OID_SHORTRETRIES,
333	DOT11_OID_LONGRETRIES,
334	DOT11_OID_MAXTXLIFETIME,
335	DOT11_OID_MAXRXLIFETIME,
336	DOT11_OID_AUTHRESPTIMEOUT,
337	DOT11_OID_ASSOCRESPTIMEOUT,
338
339	DOT11_OID_ALOFT_TABLE,
340	DOT11_OID_ALOFT_CTRL_TABLE,
341	DOT11_OID_ALOFT_RETREAT,
342	DOT11_OID_ALOFT_PROGRESS,
343	DOT11_OID_ALOFT_FIXEDRATE,
344	DOT11_OID_ALOFT_RSSIGRAPH,
345	DOT11_OID_ALOFT_CONFIG,
346
347	DOT11_OID_VDCFX,
348	DOT11_OID_MAXFRAMEBURST,
349
350	DOT11_OID_PSM,
351	DOT11_OID_CAMTIMEOUT,
352	DOT11_OID_RECEIVEDTIMS,
353	DOT11_OID_ROAMPREFERENCE,
354
355	DOT11_OID_BRIDGELOCAL,
356	DOT11_OID_CLIENTS,
357	DOT11_OID_CLIENTSASSOCIATED,
358	DOT11_OID_CLIENTX,	/* DOT11_OID_CLIENTX,...DOT11_OID_CLIENT2007 */
359
360	DOT11_OID_CLIENTFIND,
361	DOT11_OID_WDSLINKADD,
362	DOT11_OID_WDSLINKREMOVE,
363	DOT11_OID_EAPAUTHSTA,
364	DOT11_OID_EAPUNAUTHSTA,
365	DOT11_OID_DOT1XENABLE,
366	DOT11_OID_MICFAILURE,
367	DOT11_OID_REKEYINDICATE,
368
369	DOT11_OID_MPDUTXSUCCESSFUL,
370	DOT11_OID_MPDUTXONERETRY,
371	DOT11_OID_MPDUTXMULTIPLERETRIES,
372	DOT11_OID_MPDUTXFAILED,
373	DOT11_OID_MPDURXSUCCESSFUL,
374	DOT11_OID_MPDURXDUPS,
375	DOT11_OID_RTSSUCCESSFUL,
376	DOT11_OID_RTSFAILED,
377	DOT11_OID_ACKFAILED,
378	DOT11_OID_FRAMERECEIVES,
379	DOT11_OID_FRAMEERRORS,
380	DOT11_OID_FRAMEABORTS,
381	DOT11_OID_FRAMEABORTSPHY,
382
383	DOT11_OID_SLOTTIME,
384	DOT11_OID_CWMIN, /* MIN DCS backoff */
385	DOT11_OID_CWMAX, /* MAX DCS backoff */
386	DOT11_OID_ACKWINDOW,
387	DOT11_OID_ANTENNARX,
388	DOT11_OID_ANTENNATX,
389	DOT11_OID_ANTENNADIVERSITY,
390	DOT11_OID_CHANNEL,
391	DOT11_OID_EDTHRESHOLD,
392	DOT11_OID_PREAMBLESETTINGS,
393	DOT11_OID_RATES,
394	DOT11_OID_CCAMODESUPPORTED,
395	DOT11_OID_CCAMODE,
396	DOT11_OID_RSSIVECTOR,
397	DOT11_OID_OUTPUTPOWERTABLE,
398	DOT11_OID_OUTPUTPOWER,
399	DOT11_OID_SUPPORTEDRATES,
400	DOT11_OID_FREQUENCY,
401	DOT11_OID_SUPPORTEDFREQUENCIES,
402	DOT11_OID_NOISEFLOOR,
403	DOT11_OID_FREQUENCYACTIVITY,
404	DOT11_OID_IQCALIBRATIONTABLE,
405	DOT11_OID_NONERPPROTECTION,
406	DOT11_OID_SLOTSETTINGS,
407	DOT11_OID_NONERPTIMEOUT,
408	DOT11_OID_PROFILES,
409	DOT11_OID_EXTENDEDRATES,
410
411	DOT11_OID_DEAUTHENTICATE,
412	DOT11_OID_AUTHENTICATE,
413	DOT11_OID_DISASSOCIATE,
414	DOT11_OID_ASSOCIATE,
415	DOT11_OID_SCAN,
416	DOT11_OID_BEACON,
417	DOT11_OID_PROBE,
418	DOT11_OID_DEAUTHENTICATEEX,
419	DOT11_OID_AUTHENTICATEEX,
420	DOT11_OID_DISASSOCIATEEX,
421	DOT11_OID_ASSOCIATEEX,
422	DOT11_OID_REASSOCIATE,
423	DOT11_OID_REASSOCIATEEX,
424
425	DOT11_OID_NONERPSTATUS,
426
427	DOT11_OID_STATIMEOUT,
428	DOT11_OID_MLMEAUTOLEVEL,
429	DOT11_OID_BSSTIMEOUT,
430	DOT11_OID_ATTACHMENT,
431	DOT11_OID_PSMBUFFER,
432
433	DOT11_OID_BSSS,
434	DOT11_OID_BSSX,		/*DOT11_OID_BSS1,...,DOT11_OID_BSS64 */
435	DOT11_OID_BSSFIND,
436	DOT11_OID_BSSLIST,
437
438	OID_INL_TUNNEL,
439	OID_INL_MEMADDR,
440	OID_INL_MEMORY,
441	OID_INL_MODE,
442	OID_INL_COMPONENT_NR,
443	OID_INL_VERSION,
444	OID_INL_INTERFACE_ID,
445	OID_INL_COMPONENT_ID,
446	OID_INL_CONFIG,
447	OID_INL_DOT11D_CONFORMANCE,
448	OID_INL_PHYCAPABILITIES,
449	OID_INL_OUTPUTPOWER,
450
451	OID_NUM_LAST
452};
453
454#define OID_FLAG_CACHED		0x80
455#define OID_FLAG_TYPE		0x7f
456
457#define OID_TYPE_U32		0x01
458#define OID_TYPE_SSID		0x02
459#define OID_TYPE_KEY		0x03
460#define OID_TYPE_BUFFER		0x04
461#define OID_TYPE_BSS		0x05
462#define OID_TYPE_BSSLIST	0x06
463#define OID_TYPE_FREQUENCIES	0x07
464#define OID_TYPE_MLME		0x08
465#define OID_TYPE_MLMEEX		0x09
466#define OID_TYPE_ADDR		0x0A
467#define OID_TYPE_RAW		0x0B
468#define OID_TYPE_ATTACH		0x0C
469
470/* OID_TYPE_MLMEEX is special because of a variable size field when sending.
471 * Not yet implemented (not used in driver anyway).
472 */
473
474struct oid_t {
475	enum oid_num_t oid;
476	short range;		/* to define a range of oid */
477	short size;		/* max size of the associated data */
478	char flags;
479};
480
481union oid_res_t {
482	void *ptr;
483	u32 u;
484};
485
486#define	IWMAX_BITRATES	20
487#define	IWMAX_BSS	24
488#define IWMAX_FREQ	30
489#define PRIV_STR_SIZE	1024
490
491#endif				/* !defined(_ISL_OID_H) */
492/* EOF */