1# SPDX-License-Identifier: GPL-2.0-only
 2#
 3# Solarflare device configuration
 4#
 5
 6config NET_VENDOR_SOLARFLARE
 7	bool "Solarflare devices"
 8	default y
 9	help
10	  If you have a network (Ethernet) card belonging to this class, say Y.
11
12	  Note that the answer to this question doesn't directly affect the
13	  kernel: saying N will just cause the configurator to skip all
14	  the questions about Solarflare devices. If you say Y, you will be asked
15	  for your specific card in the following questions.
16
17if NET_VENDOR_SOLARFLARE
18
19config SFC
20	tristate "Solarflare SFC9100/EF100-family support"
21	depends on PCI
22	depends on PTP_1588_CLOCK_OPTIONAL
23	select MDIO
24	select CRC32
25	select NET_DEVLINK
26	help
 
 
27	  This driver supports 10/40-gigabit Ethernet cards based on
28	  the Solarflare SFC9100-family controllers.
29
30	  It also supports 10/25/40/100-gigabit Ethernet cards based
31	  on the Solarflare EF100 networking IP in Xilinx FPGAs.
32
33	  To compile this driver as a module, choose M here.  The module
34	  will be called sfc.
35config SFC_MTD
36	bool "Solarflare SFC9100-family MTD support"
37	depends on SFC && MTD && !(SFC=y && MTD=m)
38	default y
39	help
40	  This exposes the on-board flash and/or EEPROM as MTD devices
41	  (e.g. /dev/mtd1).  This is required to update the firmware or
42	  the boot configuration under Linux.
43config SFC_MCDI_MON
44	bool "Solarflare SFC9100-family hwmon support"
45	depends on SFC && HWMON && !(SFC=y && HWMON=m)
46	default y
47	help
48	  This exposes the on-board firmware-managed sensors as a
49	  hardware monitor device.
50config SFC_SRIOV
51	bool "Solarflare SFC9100-family SR-IOV support"
52	depends on SFC && PCI_IOV
53	depends on INET
54	default y
55	help
56	  This enables support for the Single Root I/O Virtualization
57	  features, allowing accelerated network performance in
58	  virtualized environments.
59config SFC_MCDI_LOGGING
60	bool "Solarflare SFC9100-family MCDI logging support"
61	depends on SFC
62	default y
63	help
64	  This enables support for tracing of MCDI (Management-Controller-to-
65	  Driver-Interface) commands and responses, allowing debugging of
66	  driver/firmware interaction.  The tracing is actually enabled by
67	  a sysfs file 'mcdi_logging' under the PCI device.
68
69source "drivers/net/ethernet/sfc/falcon/Kconfig"
70source "drivers/net/ethernet/sfc/siena/Kconfig"
71
72endif # NET_VENDOR_SOLARFLARE

 1# SPDX-License-Identifier: GPL-2.0-only
 2#
 3# Solarflare device configuration
 4#
 5
 6config NET_VENDOR_SOLARFLARE
 7	bool "Solarflare devices"
 8	default y
 9	---help---
10	  If you have a network (Ethernet) card belonging to this class, say Y.
11
12	  Note that the answer to this question doesn't directly affect the
13	  kernel: saying N will just cause the configurator to skip all
14	  the questions about Solarflare devices. If you say Y, you will be asked
15	  for your specific card in the following questions.
16
17if NET_VENDOR_SOLARFLARE
18
19config SFC
20	tristate "Solarflare SFC9000/SFC9100-family support"
21	depends on PCI
 
22	select MDIO
23	select CRC32
24	select I2C
25	select I2C_ALGOBIT
26	imply PTP_1588_CLOCK
27	---help---
28	  This driver supports 10/40-gigabit Ethernet cards based on
29	  the Solarflare SFC9000-family and SFC9100-family controllers.
 
 
 
30
31	  To compile this driver as a module, choose M here.  The module
32	  will be called sfc.
33config SFC_MTD
34	bool "Solarflare SFC9000/SFC9100-family MTD support"
35	depends on SFC && MTD && !(SFC=y && MTD=m)
36	default y
37	---help---
38	  This exposes the on-board flash and/or EEPROM as MTD devices
39	  (e.g. /dev/mtd1).  This is required to update the firmware or
40	  the boot configuration under Linux.
41config SFC_MCDI_MON
42	bool "Solarflare SFC9000/SFC9100-family hwmon support"
43	depends on SFC && HWMON && !(SFC=y && HWMON=m)
44	default y
45	---help---
46	  This exposes the on-board firmware-managed sensors as a
47	  hardware monitor device.
48config SFC_SRIOV
49	bool "Solarflare SFC9000-family SR-IOV support"
50	depends on SFC && PCI_IOV
 
51	default y
52	---help---
53	  This enables support for the SFC9000 I/O Virtualization
54	  features, allowing accelerated network performance in
55	  virtualized environments.
56config SFC_MCDI_LOGGING
57	bool "Solarflare SFC9000/SFC9100-family MCDI logging support"
58	depends on SFC
59	default y
60	---help---
61	  This enables support for tracing of MCDI (Management-Controller-to-
62	  Driver-Interface) commands and responses, allowing debugging of
63	  driver/firmware interaction.  The tracing is actually enabled by
64	  a sysfs file 'mcdi_logging' under the PCI device.
65
66source "drivers/net/ethernet/sfc/falcon/Kconfig"
 
67
68endif # NET_VENDOR_SOLARFLARE