Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/* dummy.c: a dummy net driver
3
4 The purpose of this driver is to provide a device to point a
5 route through, but not to actually transmit packets.
6
7 Why? If you have a machine whose only connection is an occasional
8 PPP/SLIP/PLIP link, you can only connect to your own hostname
9 when the link is up. Otherwise you have to use localhost.
10 This isn't very consistent.
11
12 One solution is to set up a dummy link using PPP/SLIP/PLIP,
13 but this seems (to me) too much overhead for too little gain.
14 This driver provides a small alternative. Thus you can do
15
16 [when not running slip]
17 ifconfig dummy slip.addr.ess.here up
18 [to go to slip]
19 ifconfig dummy down
20 dip whatever
21
22 This was written by looking at Donald Becker's skeleton driver
23 and the loopback driver. I then threw away anything that didn't
24 apply! Thanks to Alan Cox for the key clue on what to do with
25 misguided packets.
26
27 Nick Holloway, 27th May 1994
28 [I tweaked this explanation a little but that's all]
29 Alan Cox, 30th May 1994
30*/
31
32#include <linux/module.h>
33#include <linux/kernel.h>
34#include <linux/netdevice.h>
35#include <linux/etherdevice.h>
36#include <linux/ethtool.h>
37#include <linux/init.h>
38#include <linux/moduleparam.h>
39#include <linux/rtnetlink.h>
40#include <linux/net_tstamp.h>
41#include <net/rtnetlink.h>
42#include <linux/u64_stats_sync.h>
43
44#define DRV_NAME "dummy"
45
46static int numdummies = 1;
47
48/* fake multicast ability */
49static void set_multicast_list(struct net_device *dev)
50{
51}
52
53static void dummy_get_stats64(struct net_device *dev,
54 struct rtnl_link_stats64 *stats)
55{
56 dev_lstats_read(dev, &stats->tx_packets, &stats->tx_bytes);
57}
58
59static netdev_tx_t dummy_xmit(struct sk_buff *skb, struct net_device *dev)
60{
61 dev_lstats_add(dev, skb->len);
62
63 skb_tx_timestamp(skb);
64 dev_kfree_skb(skb);
65 return NETDEV_TX_OK;
66}
67
68static int dummy_dev_init(struct net_device *dev)
69{
70 dev->lstats = netdev_alloc_pcpu_stats(struct pcpu_lstats);
71 if (!dev->lstats)
72 return -ENOMEM;
73
74 return 0;
75}
76
77static void dummy_dev_uninit(struct net_device *dev)
78{
79 free_percpu(dev->lstats);
80}
81
82static int dummy_change_carrier(struct net_device *dev, bool new_carrier)
83{
84 if (new_carrier)
85 netif_carrier_on(dev);
86 else
87 netif_carrier_off(dev);
88 return 0;
89}
90
91static const struct net_device_ops dummy_netdev_ops = {
92 .ndo_init = dummy_dev_init,
93 .ndo_uninit = dummy_dev_uninit,
94 .ndo_start_xmit = dummy_xmit,
95 .ndo_validate_addr = eth_validate_addr,
96 .ndo_set_rx_mode = set_multicast_list,
97 .ndo_set_mac_address = eth_mac_addr,
98 .ndo_get_stats64 = dummy_get_stats64,
99 .ndo_change_carrier = dummy_change_carrier,
100};
101
102static const struct ethtool_ops dummy_ethtool_ops = {
103 .get_ts_info = ethtool_op_get_ts_info,
104};
105
106static void dummy_setup(struct net_device *dev)
107{
108 ether_setup(dev);
109
110 /* Initialize the device structure. */
111 dev->netdev_ops = &dummy_netdev_ops;
112 dev->ethtool_ops = &dummy_ethtool_ops;
113 dev->needs_free_netdev = true;
114
115 /* Fill in device structure with ethernet-generic values. */
116 dev->flags |= IFF_NOARP;
117 dev->flags &= ~IFF_MULTICAST;
118 dev->priv_flags |= IFF_LIVE_ADDR_CHANGE | IFF_NO_QUEUE;
119 dev->features |= NETIF_F_SG | NETIF_F_FRAGLIST;
120 dev->features |= NETIF_F_GSO_SOFTWARE;
121 dev->features |= NETIF_F_HW_CSUM | NETIF_F_HIGHDMA | NETIF_F_LLTX;
122 dev->features |= NETIF_F_GSO_ENCAP_ALL;
123 dev->hw_features |= dev->features;
124 dev->hw_enc_features |= dev->features;
125 eth_hw_addr_random(dev);
126
127 dev->min_mtu = 0;
128 dev->max_mtu = 0;
129}
130
131static int dummy_validate(struct nlattr *tb[], struct nlattr *data[],
132 struct netlink_ext_ack *extack)
133{
134 if (tb[IFLA_ADDRESS]) {
135 if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
136 return -EINVAL;
137 if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
138 return -EADDRNOTAVAIL;
139 }
140 return 0;
141}
142
143static struct rtnl_link_ops dummy_link_ops __read_mostly = {
144 .kind = DRV_NAME,
145 .setup = dummy_setup,
146 .validate = dummy_validate,
147};
148
149/* Number of dummy devices to be set up by this module. */
150module_param(numdummies, int, 0);
151MODULE_PARM_DESC(numdummies, "Number of dummy pseudo devices");
152
153static int __init dummy_init_one(void)
154{
155 struct net_device *dev_dummy;
156 int err;
157
158 dev_dummy = alloc_netdev(0, "dummy%d", NET_NAME_ENUM, dummy_setup);
159 if (!dev_dummy)
160 return -ENOMEM;
161
162 dev_dummy->rtnl_link_ops = &dummy_link_ops;
163 err = register_netdevice(dev_dummy);
164 if (err < 0)
165 goto err;
166 return 0;
167
168err:
169 free_netdev(dev_dummy);
170 return err;
171}
172
173static int __init dummy_init_module(void)
174{
175 int i, err = 0;
176
177 down_write(&pernet_ops_rwsem);
178 rtnl_lock();
179 err = __rtnl_link_register(&dummy_link_ops);
180 if (err < 0)
181 goto out;
182
183 for (i = 0; i < numdummies && !err; i++) {
184 err = dummy_init_one();
185 cond_resched();
186 }
187 if (err < 0)
188 __rtnl_link_unregister(&dummy_link_ops);
189
190out:
191 rtnl_unlock();
192 up_write(&pernet_ops_rwsem);
193
194 return err;
195}
196
197static void __exit dummy_cleanup_module(void)
198{
199 rtnl_link_unregister(&dummy_link_ops);
200}
201
202module_init(dummy_init_module);
203module_exit(dummy_cleanup_module);
204MODULE_LICENSE("GPL");
205MODULE_DESCRIPTION("Dummy netdevice driver which discards all packets sent to it");
206MODULE_ALIAS_RTNL_LINK(DRV_NAME);
1// SPDX-License-Identifier: GPL-2.0-only
2/* dummy.c: a dummy net driver
3
4 The purpose of this driver is to provide a device to point a
5 route through, but not to actually transmit packets.
6
7 Why? If you have a machine whose only connection is an occasional
8 PPP/SLIP/PLIP link, you can only connect to your own hostname
9 when the link is up. Otherwise you have to use localhost.
10 This isn't very consistent.
11
12 One solution is to set up a dummy link using PPP/SLIP/PLIP,
13 but this seems (to me) too much overhead for too little gain.
14 This driver provides a small alternative. Thus you can do
15
16 [when not running slip]
17 ifconfig dummy slip.addr.ess.here up
18 [to go to slip]
19 ifconfig dummy down
20 dip whatever
21
22 This was written by looking at Donald Becker's skeleton driver
23 and the loopback driver. I then threw away anything that didn't
24 apply! Thanks to Alan Cox for the key clue on what to do with
25 misguided packets.
26
27 Nick Holloway, 27th May 1994
28 [I tweaked this explanation a little but that's all]
29 Alan Cox, 30th May 1994
30*/
31
32#include <linux/module.h>
33#include <linux/kernel.h>
34#include <linux/netdevice.h>
35#include <linux/etherdevice.h>
36#include <linux/ethtool.h>
37#include <linux/init.h>
38#include <linux/moduleparam.h>
39#include <linux/rtnetlink.h>
40#include <linux/net_tstamp.h>
41#include <net/rtnetlink.h>
42#include <linux/u64_stats_sync.h>
43
44#define DRV_NAME "dummy"
45#define DRV_VERSION "1.0"
46
47static int numdummies = 1;
48
49/* fake multicast ability */
50static void set_multicast_list(struct net_device *dev)
51{
52}
53
54struct pcpu_dstats {
55 u64 tx_packets;
56 u64 tx_bytes;
57 struct u64_stats_sync syncp;
58};
59
60static void dummy_get_stats64(struct net_device *dev,
61 struct rtnl_link_stats64 *stats)
62{
63 int i;
64
65 for_each_possible_cpu(i) {
66 const struct pcpu_dstats *dstats;
67 u64 tbytes, tpackets;
68 unsigned int start;
69
70 dstats = per_cpu_ptr(dev->dstats, i);
71 do {
72 start = u64_stats_fetch_begin_irq(&dstats->syncp);
73 tbytes = dstats->tx_bytes;
74 tpackets = dstats->tx_packets;
75 } while (u64_stats_fetch_retry_irq(&dstats->syncp, start));
76 stats->tx_bytes += tbytes;
77 stats->tx_packets += tpackets;
78 }
79}
80
81static netdev_tx_t dummy_xmit(struct sk_buff *skb, struct net_device *dev)
82{
83 struct pcpu_dstats *dstats = this_cpu_ptr(dev->dstats);
84
85 u64_stats_update_begin(&dstats->syncp);
86 dstats->tx_packets++;
87 dstats->tx_bytes += skb->len;
88 u64_stats_update_end(&dstats->syncp);
89
90 skb_tx_timestamp(skb);
91 dev_kfree_skb(skb);
92 return NETDEV_TX_OK;
93}
94
95static int dummy_dev_init(struct net_device *dev)
96{
97 dev->dstats = netdev_alloc_pcpu_stats(struct pcpu_dstats);
98 if (!dev->dstats)
99 return -ENOMEM;
100
101 return 0;
102}
103
104static void dummy_dev_uninit(struct net_device *dev)
105{
106 free_percpu(dev->dstats);
107}
108
109static int dummy_change_carrier(struct net_device *dev, bool new_carrier)
110{
111 if (new_carrier)
112 netif_carrier_on(dev);
113 else
114 netif_carrier_off(dev);
115 return 0;
116}
117
118static const struct net_device_ops dummy_netdev_ops = {
119 .ndo_init = dummy_dev_init,
120 .ndo_uninit = dummy_dev_uninit,
121 .ndo_start_xmit = dummy_xmit,
122 .ndo_validate_addr = eth_validate_addr,
123 .ndo_set_rx_mode = set_multicast_list,
124 .ndo_set_mac_address = eth_mac_addr,
125 .ndo_get_stats64 = dummy_get_stats64,
126 .ndo_change_carrier = dummy_change_carrier,
127};
128
129static void dummy_get_drvinfo(struct net_device *dev,
130 struct ethtool_drvinfo *info)
131{
132 strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
133 strlcpy(info->version, DRV_VERSION, sizeof(info->version));
134}
135
136static const struct ethtool_ops dummy_ethtool_ops = {
137 .get_drvinfo = dummy_get_drvinfo,
138 .get_ts_info = ethtool_op_get_ts_info,
139};
140
141static void dummy_setup(struct net_device *dev)
142{
143 ether_setup(dev);
144
145 /* Initialize the device structure. */
146 dev->netdev_ops = &dummy_netdev_ops;
147 dev->ethtool_ops = &dummy_ethtool_ops;
148 dev->needs_free_netdev = true;
149
150 /* Fill in device structure with ethernet-generic values. */
151 dev->flags |= IFF_NOARP;
152 dev->flags &= ~IFF_MULTICAST;
153 dev->priv_flags |= IFF_LIVE_ADDR_CHANGE | IFF_NO_QUEUE;
154 dev->features |= NETIF_F_SG | NETIF_F_FRAGLIST;
155 dev->features |= NETIF_F_ALL_TSO;
156 dev->features |= NETIF_F_HW_CSUM | NETIF_F_HIGHDMA | NETIF_F_LLTX;
157 dev->features |= NETIF_F_GSO_ENCAP_ALL;
158 dev->hw_features |= dev->features;
159 dev->hw_enc_features |= dev->features;
160 eth_hw_addr_random(dev);
161
162 dev->min_mtu = 0;
163 dev->max_mtu = 0;
164}
165
166static int dummy_validate(struct nlattr *tb[], struct nlattr *data[],
167 struct netlink_ext_ack *extack)
168{
169 if (tb[IFLA_ADDRESS]) {
170 if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
171 return -EINVAL;
172 if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
173 return -EADDRNOTAVAIL;
174 }
175 return 0;
176}
177
178static struct rtnl_link_ops dummy_link_ops __read_mostly = {
179 .kind = DRV_NAME,
180 .setup = dummy_setup,
181 .validate = dummy_validate,
182};
183
184/* Number of dummy devices to be set up by this module. */
185module_param(numdummies, int, 0);
186MODULE_PARM_DESC(numdummies, "Number of dummy pseudo devices");
187
188static int __init dummy_init_one(void)
189{
190 struct net_device *dev_dummy;
191 int err;
192
193 dev_dummy = alloc_netdev(0, "dummy%d", NET_NAME_ENUM, dummy_setup);
194 if (!dev_dummy)
195 return -ENOMEM;
196
197 dev_dummy->rtnl_link_ops = &dummy_link_ops;
198 err = register_netdevice(dev_dummy);
199 if (err < 0)
200 goto err;
201 return 0;
202
203err:
204 free_netdev(dev_dummy);
205 return err;
206}
207
208static int __init dummy_init_module(void)
209{
210 int i, err = 0;
211
212 down_write(&pernet_ops_rwsem);
213 rtnl_lock();
214 err = __rtnl_link_register(&dummy_link_ops);
215 if (err < 0)
216 goto out;
217
218 for (i = 0; i < numdummies && !err; i++) {
219 err = dummy_init_one();
220 cond_resched();
221 }
222 if (err < 0)
223 __rtnl_link_unregister(&dummy_link_ops);
224
225out:
226 rtnl_unlock();
227 up_write(&pernet_ops_rwsem);
228
229 return err;
230}
231
232static void __exit dummy_cleanup_module(void)
233{
234 rtnl_link_unregister(&dummy_link_ops);
235}
236
237module_init(dummy_init_module);
238module_exit(dummy_cleanup_module);
239MODULE_LICENSE("GPL");
240MODULE_ALIAS_RTNL_LINK(DRV_NAME);
241MODULE_VERSION(DRV_VERSION);