Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source
4 *
5 * Copyright 2006 Pengutronix
6 * Sascha Hauer <s.hauer@pengutronix.de>
7 * Copyright 2007 Pengutronix
8 * Juergen Beisert <j.beisert@pengutronix.de>
9 */
10
11/include/ "mpc5200b.dtsi"
12
13&gpt0 { fsl,has-wdt; };
14&gpt2 { gpio-controller; };
15&gpt3 { gpio-controller; };
16&gpt4 { gpio-controller; };
17&gpt5 { gpio-controller; };
18&gpt6 { gpio-controller; };
19&gpt7 { gpio-controller; };
20
21/ {
22 model = "phytec,pcm030";
23 compatible = "phytec,pcm030";
24
25 soc5200@f0000000 {
26 audioplatform: psc@2000 { /* PSC1 in ac97 mode */
27 compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
28 cell-index = <0>;
29 };
30
31 /* PSC2 port is used by CAN1/2 */
32 psc@2200 {
33 status = "disabled";
34 };
35
36 psc@2400 { /* PSC3 in UART mode */
37 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
38 };
39
40 /* PSC4 is ??? */
41 psc@2600 {
42 status = "disabled";
43 };
44
45 /* PSC5 is ??? */
46 psc@2800 {
47 status = "disabled";
48 };
49
50 psc@2c00 { /* PSC6 in UART mode */
51 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
52 };
53
54 ethernet@3000 {
55 phy-handle = <&phy0>;
56 };
57
58 mdio@3000 {
59 phy0: ethernet-phy@0 {
60 reg = <0>;
61 };
62 };
63
64 i2c@3d40 {
65 rtc@51 {
66 compatible = "nxp,pcf8563";
67 reg = <0x51>;
68 };
69 eeprom@52 {
70 compatible = "catalyst,24c32", "atmel,24c32";
71 reg = <0x52>;
72 pagesize = <32>;
73 };
74 };
75
76 sram@8000 {
77 compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
78 reg = <0x8000 0x4000>;
79 };
80 };
81
82 pci@f0000d00 {
83 interrupt-map-mask = <0xf800 0 0 7>;
84 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
85 0xc000 0 0 2 &mpc5200_pic 1 1 3
86 0xc000 0 0 3 &mpc5200_pic 1 2 3
87 0xc000 0 0 4 &mpc5200_pic 1 3 3
88
89 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
90 0xc800 0 0 2 &mpc5200_pic 1 2 3
91 0xc800 0 0 3 &mpc5200_pic 1 3 3
92 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
93 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000>,
94 <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000>,
95 <0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
96 };
97
98 localbus {
99 status = "disabled";
100 };
101
102 sound {
103 compatible = "phytec,pcm030-audio-fabric";
104 asoc-platform = <&audioplatform>;
105 };
106};
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source
4 *
5 * Copyright 2006 Pengutronix
6 * Sascha Hauer <s.hauer@pengutronix.de>
7 * Copyright 2007 Pengutronix
8 * Juergen Beisert <j.beisert@pengutronix.de>
9 */
10
11/include/ "mpc5200b.dtsi"
12
13&gpt0 { fsl,has-wdt; };
14&gpt2 { gpio-controller; };
15&gpt3 { gpio-controller; };
16&gpt4 { gpio-controller; };
17&gpt5 { gpio-controller; };
18&gpt6 { gpio-controller; };
19&gpt7 { gpio-controller; };
20
21/ {
22 model = "phytec,pcm030";
23 compatible = "phytec,pcm030";
24
25 soc5200@f0000000 {
26 audioplatform: psc@2000 { /* PSC1 in ac97 mode */
27 compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
28 cell-index = <0>;
29 };
30
31 /* PSC2 port is used by CAN1/2 */
32 psc@2200 {
33 status = "disabled";
34 };
35
36 psc@2400 { /* PSC3 in UART mode */
37 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
38 };
39
40 /* PSC4 is ??? */
41 psc@2600 {
42 status = "disabled";
43 };
44
45 /* PSC5 is ??? */
46 psc@2800 {
47 status = "disabled";
48 };
49
50 psc@2c00 { /* PSC6 in UART mode */
51 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
52 };
53
54 ethernet@3000 {
55 phy-handle = <&phy0>;
56 };
57
58 mdio@3000 {
59 phy0: ethernet-phy@0 {
60 reg = <0>;
61 };
62 };
63
64 i2c@3d40 {
65 rtc@51 {
66 compatible = "nxp,pcf8563";
67 reg = <0x51>;
68 };
69 eeprom@52 {
70 compatible = "catalyst,24c32", "atmel,24c32";
71 reg = <0x52>;
72 pagesize = <32>;
73 };
74 };
75
76 sram@8000 {
77 compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
78 reg = <0x8000 0x4000>;
79 };
80 };
81
82 pci@f0000d00 {
83 interrupt-map-mask = <0xf800 0 0 7>;
84 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
85 0xc000 0 0 2 &mpc5200_pic 1 1 3
86 0xc000 0 0 3 &mpc5200_pic 1 2 3
87 0xc000 0 0 4 &mpc5200_pic 1 3 3
88
89 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
90 0xc800 0 0 2 &mpc5200_pic 1 2 3
91 0xc800 0 0 3 &mpc5200_pic 1 3 3
92 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
93 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
94 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
95 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
96 };
97
98 localbus {
99 status = "disabled";
100 };
101
102 sound {
103 compatible = "phytec,pcm030-audio-fabric";
104 asoc-platform = <&audioplatform>;
105 };
106};