Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * xHCI host controller driver PCI Bus Glue.
4 *
5 * Copyright (C) 2008 Intel Corp.
6 *
7 * Author: Sarah Sharp
8 * Some code borrowed from the Linux EHCI driver.
9 */
10
11#include <linux/pci.h>
12#include <linux/slab.h>
13#include <linux/module.h>
14#include <linux/acpi.h>
15#include <linux/reset.h>
16#include <linux/suspend.h>
17
18#include "xhci.h"
19#include "xhci-trace.h"
20#include "xhci-pci.h"
21
22#define SSIC_PORT_NUM 2
23#define SSIC_PORT_CFG2 0x880c
24#define SSIC_PORT_CFG2_OFFSET 0x30
25#define PROG_DONE (1 << 30)
26#define SSIC_PORT_UNUSED (1 << 31)
27#define SPARSE_DISABLE_BIT 17
28#define SPARSE_CNTL_ENABLE 0xC12C
29
30/* Device for a quirk */
31#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
32#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
33#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009
34#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 0x1100
35#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400
36
37#define PCI_VENDOR_ID_ETRON 0x1b6f
38#define PCI_DEVICE_ID_EJ168 0x7023
39
40#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31
41#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31
42#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI 0x9cb1
43#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5
44#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f
45#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f
46#define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8
47#define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8
48#define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8
49#define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0
50#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI 0x15b5
51#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI 0x15b6
52#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI 0x15c1
53#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI 0x15db
54#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI 0x15d4
55#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI 0x15e9
56#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI 0x15ec
57#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI 0x15f0
58#define PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI 0x8a13
59#define PCI_DEVICE_ID_INTEL_CML_XHCI 0xa3af
60#define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI 0x9a13
61#define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138
62#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI 0x51ed
63#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI 0x54ed
64
65#define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639
66#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9
67#define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba
68#define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb
69#define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc
70
71#define PCI_DEVICE_ID_ASMEDIA_1042_XHCI 0x1042
72#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142
73#define PCI_DEVICE_ID_ASMEDIA_1142_XHCI 0x1242
74#define PCI_DEVICE_ID_ASMEDIA_2142_XHCI 0x2142
75#define PCI_DEVICE_ID_ASMEDIA_3242_XHCI 0x3242
76
77static const char hcd_name[] = "xhci_hcd";
78
79static struct hc_driver __read_mostly xhci_pci_hc_driver;
80
81static int xhci_pci_setup(struct usb_hcd *hcd);
82static int xhci_pci_run(struct usb_hcd *hcd);
83static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
84 struct usb_tt *tt, gfp_t mem_flags);
85
86static const struct xhci_driver_overrides xhci_pci_overrides __initconst = {
87 .reset = xhci_pci_setup,
88 .start = xhci_pci_run,
89 .update_hub_device = xhci_pci_update_hub_device,
90};
91
92static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
93{
94 struct usb_hcd *hcd = xhci_to_hcd(xhci);
95
96 if (hcd->msix_enabled) {
97 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
98
99 /* for now, the driver only supports one primary interrupter */
100 synchronize_irq(pci_irq_vector(pdev, 0));
101 }
102}
103
104/* Free any IRQs and disable MSI-X */
105static void xhci_cleanup_msix(struct xhci_hcd *xhci)
106{
107 struct usb_hcd *hcd = xhci_to_hcd(xhci);
108 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
109
110 /* return if using legacy interrupt */
111 if (hcd->irq > 0)
112 return;
113
114 free_irq(pci_irq_vector(pdev, 0), xhci_to_hcd(xhci));
115 pci_free_irq_vectors(pdev);
116 hcd->msix_enabled = 0;
117}
118
119/* Try enabling MSI-X with MSI and legacy IRQ as fallback */
120static int xhci_try_enable_msi(struct usb_hcd *hcd)
121{
122 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
123 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
124 int ret;
125
126 /*
127 * Some Fresco Logic host controllers advertise MSI, but fail to
128 * generate interrupts. Don't even try to enable MSI.
129 */
130 if (xhci->quirks & XHCI_BROKEN_MSI)
131 goto legacy_irq;
132
133 /* unregister the legacy interrupt */
134 if (hcd->irq)
135 free_irq(hcd->irq, hcd);
136 hcd->irq = 0;
137
138 /*
139 * calculate number of MSI-X vectors supported.
140 * - HCS_MAX_INTRS: the max number of interrupts the host can handle,
141 * with max number of interrupters based on the xhci HCSPARAMS1.
142 * - num_online_cpus: maximum MSI-X vectors per CPUs core.
143 * Add additional 1 vector to ensure always available interrupt.
144 */
145 xhci->nvecs = min(num_online_cpus() + 1,
146 HCS_MAX_INTRS(xhci->hcs_params1));
147
148 /* TODO: Check with MSI Soc for sysdev */
149 xhci->nvecs = pci_alloc_irq_vectors(pdev, 1, xhci->nvecs,
150 PCI_IRQ_MSIX | PCI_IRQ_MSI);
151 if (xhci->nvecs < 0) {
152 xhci_dbg_trace(xhci, trace_xhci_dbg_init,
153 "failed to allocate IRQ vectors");
154 goto legacy_irq;
155 }
156
157 ret = request_irq(pci_irq_vector(pdev, 0), xhci_msi_irq, 0, "xhci_hcd",
158 xhci_to_hcd(xhci));
159 if (ret)
160 goto free_irq_vectors;
161
162 hcd->msi_enabled = 1;
163 hcd->msix_enabled = pdev->msix_enabled;
164 return 0;
165
166free_irq_vectors:
167 xhci_dbg_trace(xhci, trace_xhci_dbg_init, "disable %s interrupt",
168 pdev->msix_enabled ? "MSI-X" : "MSI");
169 pci_free_irq_vectors(pdev);
170
171legacy_irq:
172 if (!pdev->irq) {
173 xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
174 return -EINVAL;
175 }
176
177 if (!strlen(hcd->irq_descr))
178 snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
179 hcd->driver->description, hcd->self.busnum);
180
181 /* fall back to legacy interrupt */
182 ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, hcd->irq_descr, hcd);
183 if (ret) {
184 xhci_err(xhci, "request interrupt %d failed\n", pdev->irq);
185 return ret;
186 }
187 hcd->irq = pdev->irq;
188 return 0;
189}
190
191static int xhci_pci_run(struct usb_hcd *hcd)
192{
193 int ret;
194
195 if (usb_hcd_is_primary_hcd(hcd)) {
196 ret = xhci_try_enable_msi(hcd);
197 if (ret)
198 return ret;
199 }
200
201 return xhci_run(hcd);
202}
203
204static void xhci_pci_stop(struct usb_hcd *hcd)
205{
206 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
207
208 xhci_stop(hcd);
209
210 if (usb_hcd_is_primary_hcd(hcd))
211 xhci_cleanup_msix(xhci);
212}
213
214/* called after powerup, by probe or system-pm "wakeup" */
215static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
216{
217 /*
218 * TODO: Implement finding debug ports later.
219 * TODO: see if there are any quirks that need to be added to handle
220 * new extended capabilities.
221 */
222
223 /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
224 if (!pci_set_mwi(pdev))
225 xhci_dbg(xhci, "MWI active\n");
226
227 xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
228 return 0;
229}
230
231static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
232{
233 struct pci_dev *pdev = to_pci_dev(dev);
234 struct xhci_driver_data *driver_data;
235 const struct pci_device_id *id;
236
237 id = pci_match_id(to_pci_driver(pdev->dev.driver)->id_table, pdev);
238
239 if (id && id->driver_data) {
240 driver_data = (struct xhci_driver_data *)id->driver_data;
241 xhci->quirks |= driver_data->quirks;
242 }
243
244 /* Look for vendor-specific quirks */
245 if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
246 (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
247 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
248 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
249 pdev->revision == 0x0) {
250 xhci->quirks |= XHCI_RESET_EP_QUIRK;
251 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
252 "XHCI_RESET_EP_QUIRK for this evaluation HW is deprecated");
253 }
254 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
255 pdev->revision == 0x4) {
256 xhci->quirks |= XHCI_SLOW_SUSPEND;
257 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
258 "QUIRK: Fresco Logic xHC revision %u"
259 "must be suspended extra slowly",
260 pdev->revision);
261 }
262 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK)
263 xhci->quirks |= XHCI_BROKEN_STREAMS;
264 /* Fresco Logic confirms: all revisions of this chip do not
265 * support MSI, even though some of them claim to in their PCI
266 * capabilities.
267 */
268 xhci->quirks |= XHCI_BROKEN_MSI;
269 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
270 "QUIRK: Fresco Logic revision %u "
271 "has broken MSI implementation",
272 pdev->revision);
273 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
274 }
275
276 if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
277 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009)
278 xhci->quirks |= XHCI_BROKEN_STREAMS;
279
280 if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
281 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100)
282 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
283
284 if (pdev->vendor == PCI_VENDOR_ID_NEC)
285 xhci->quirks |= XHCI_NEC_HOST;
286
287 if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
288 xhci->quirks |= XHCI_AMD_0x96_HOST;
289
290 /* AMD PLL quirk */
291 if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_quirk_pll_check())
292 xhci->quirks |= XHCI_AMD_PLL_FIX;
293
294 if (pdev->vendor == PCI_VENDOR_ID_AMD &&
295 (pdev->device == 0x145c ||
296 pdev->device == 0x15e0 ||
297 pdev->device == 0x15e1 ||
298 pdev->device == 0x43bb))
299 xhci->quirks |= XHCI_SUSPEND_DELAY;
300
301 if (pdev->vendor == PCI_VENDOR_ID_AMD &&
302 (pdev->device == 0x15e0 || pdev->device == 0x15e1))
303 xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND;
304
305 if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5) {
306 xhci->quirks |= XHCI_DISABLE_SPARSE;
307 xhci->quirks |= XHCI_RESET_ON_RESUME;
308 }
309
310 if (pdev->vendor == PCI_VENDOR_ID_AMD)
311 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
312
313 if ((pdev->vendor == PCI_VENDOR_ID_AMD) &&
314 ((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) ||
315 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) ||
316 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) ||
317 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1)))
318 xhci->quirks |= XHCI_U2_DISABLE_WAKE;
319
320 if (pdev->vendor == PCI_VENDOR_ID_AMD &&
321 pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI)
322 xhci->quirks |= XHCI_BROKEN_D3COLD_S2I;
323
324 if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
325 xhci->quirks |= XHCI_LPM_SUPPORT;
326 xhci->quirks |= XHCI_INTEL_HOST;
327 xhci->quirks |= XHCI_AVOID_BEI;
328 }
329 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
330 pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
331 xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
332 xhci->limit_active_eps = 64;
333 xhci->quirks |= XHCI_SW_BW_CHECKING;
334 /*
335 * PPT desktop boards DH77EB and DH77DF will power back on after
336 * a few seconds of being shutdown. The fix for this is to
337 * switch the ports from xHCI to EHCI on shutdown. We can't use
338 * DMI information to find those particular boards (since each
339 * vendor will change the board name), so we have to key off all
340 * PPT chipsets.
341 */
342 xhci->quirks |= XHCI_SPURIOUS_REBOOT;
343 }
344 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
345 (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI ||
346 pdev->device == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI)) {
347 xhci->quirks |= XHCI_SPURIOUS_REBOOT;
348 xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
349 }
350 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
351 (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
352 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
353 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
354 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
355 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI ||
356 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
357 pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI ||
358 pdev->device == PCI_DEVICE_ID_INTEL_CML_XHCI)) {
359 xhci->quirks |= XHCI_PME_STUCK_QUIRK;
360 }
361 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
362 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)
363 xhci->quirks |= XHCI_SSIC_PORT_UNUSED;
364 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
365 (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
366 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
367 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI))
368 xhci->quirks |= XHCI_INTEL_USB_ROLE_SW;
369 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
370 (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
371 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
372 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
373 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
374 pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI))
375 xhci->quirks |= XHCI_MISSING_CAS;
376
377 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
378 (pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI ||
379 pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI))
380 xhci->quirks |= XHCI_RESET_TO_DEFAULT;
381
382 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
383 (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI ||
384 pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI ||
385 pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI ||
386 pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI ||
387 pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI ||
388 pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI ||
389 pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI ||
390 pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI ||
391 pdev->device == PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI ||
392 pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI ||
393 pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI))
394 xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
395
396 if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
397 pdev->device == PCI_DEVICE_ID_EJ168) {
398 xhci->quirks |= XHCI_RESET_ON_RESUME;
399 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
400 xhci->quirks |= XHCI_BROKEN_STREAMS;
401 }
402 if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
403 pdev->device == 0x0014) {
404 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
405 xhci->quirks |= XHCI_ZERO_64B_REGS;
406 }
407 if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
408 pdev->device == 0x0015) {
409 xhci->quirks |= XHCI_RESET_ON_RESUME;
410 xhci->quirks |= XHCI_ZERO_64B_REGS;
411 }
412 if (pdev->vendor == PCI_VENDOR_ID_VIA)
413 xhci->quirks |= XHCI_RESET_ON_RESUME;
414
415 /* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
416 if (pdev->vendor == PCI_VENDOR_ID_VIA &&
417 pdev->device == 0x3432)
418 xhci->quirks |= XHCI_BROKEN_STREAMS;
419
420 if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483)
421 xhci->quirks |= XHCI_LPM_SUPPORT;
422
423 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
424 pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) {
425 /*
426 * try to tame the ASMedia 1042 controller which reports 0.96
427 * but appears to behave more like 1.0
428 */
429 xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
430 xhci->quirks |= XHCI_BROKEN_STREAMS;
431 }
432 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
433 pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) {
434 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
435 xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
436 }
437 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
438 (pdev->device == PCI_DEVICE_ID_ASMEDIA_1142_XHCI ||
439 pdev->device == PCI_DEVICE_ID_ASMEDIA_2142_XHCI ||
440 pdev->device == PCI_DEVICE_ID_ASMEDIA_3242_XHCI))
441 xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
442
443 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
444 pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)
445 xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL;
446
447 if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241)
448 xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
449
450 if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM ||
451 pdev->vendor == PCI_VENDOR_ID_CAVIUM) &&
452 pdev->device == 0x9026)
453 xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT;
454
455 if (pdev->vendor == PCI_VENDOR_ID_AMD &&
456 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2 ||
457 pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4))
458 xhci->quirks |= XHCI_NO_SOFT_RETRY;
459
460 if (pdev->vendor == PCI_VENDOR_ID_ZHAOXIN) {
461 xhci->quirks |= XHCI_ZHAOXIN_HOST;
462 xhci->quirks |= XHCI_LPM_SUPPORT;
463
464 if (pdev->device == 0x9202) {
465 xhci->quirks |= XHCI_RESET_ON_RESUME;
466 xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
467 }
468
469 if (pdev->device == 0x9203)
470 xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
471 }
472
473 /* xHC spec requires PCI devices to support D3hot and D3cold */
474 if (xhci->hci_version >= 0x120)
475 xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
476
477 if (xhci->quirks & XHCI_RESET_ON_RESUME)
478 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
479 "QUIRK: Resetting on resume");
480}
481
482#ifdef CONFIG_ACPI
483static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
484{
485 static const guid_t intel_dsm_guid =
486 GUID_INIT(0xac340cb7, 0xe901, 0x45bf,
487 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23);
488 union acpi_object *obj;
489
490 obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), &intel_dsm_guid, 3, 1,
491 NULL);
492 ACPI_FREE(obj);
493}
494
495static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev)
496{
497 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
498 struct xhci_hub *rhub = &xhci->usb3_rhub;
499 int ret;
500 int i;
501
502 /* This is not the usb3 roothub we are looking for */
503 if (hcd != rhub->hcd)
504 return;
505
506 if (hdev->maxchild > rhub->num_ports) {
507 dev_err(&hdev->dev, "USB3 roothub port number mismatch\n");
508 return;
509 }
510
511 for (i = 0; i < hdev->maxchild; i++) {
512 ret = usb_acpi_port_lpm_incapable(hdev, i);
513
514 dev_dbg(&hdev->dev, "port-%d disable U1/U2 _DSM: %d\n", i + 1, ret);
515
516 if (ret >= 0) {
517 rhub->ports[i]->lpm_incapable = ret;
518 continue;
519 }
520 }
521}
522
523#else
524static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
525static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev) { }
526#endif /* CONFIG_ACPI */
527
528/* called during probe() after chip reset completes */
529static int xhci_pci_setup(struct usb_hcd *hcd)
530{
531 struct xhci_hcd *xhci;
532 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
533 int retval;
534
535 xhci = hcd_to_xhci(hcd);
536 if (!xhci->sbrn)
537 pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
538
539 /* imod_interval is the interrupt moderation value in nanoseconds. */
540 xhci->imod_interval = 40000;
541
542 retval = xhci_gen_setup(hcd, xhci_pci_quirks);
543 if (retval)
544 return retval;
545
546 if (!usb_hcd_is_primary_hcd(hcd))
547 return 0;
548
549 if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
550 xhci_pme_acpi_rtd3_enable(pdev);
551
552 xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
553
554 /* Find any debug ports */
555 return xhci_pci_reinit(xhci, pdev);
556}
557
558static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
559 struct usb_tt *tt, gfp_t mem_flags)
560{
561 /* Check if acpi claims some USB3 roothub ports are lpm incapable */
562 if (!hdev->parent)
563 xhci_find_lpm_incapable_ports(hcd, hdev);
564
565 return xhci_update_hub_device(hcd, hdev, tt, mem_flags);
566}
567
568/*
569 * We need to register our own PCI probe function (instead of the USB core's
570 * function) in order to create a second roothub under xHCI.
571 */
572static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
573{
574 int retval;
575 struct xhci_hcd *xhci;
576 struct usb_hcd *hcd;
577 struct xhci_driver_data *driver_data;
578 struct reset_control *reset;
579
580 driver_data = (struct xhci_driver_data *)id->driver_data;
581 if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
582 retval = renesas_xhci_check_request_fw(dev, id);
583 if (retval)
584 return retval;
585 }
586
587 reset = devm_reset_control_get_optional_exclusive(&dev->dev, NULL);
588 if (IS_ERR(reset))
589 return PTR_ERR(reset);
590 reset_control_reset(reset);
591
592 /* Prevent runtime suspending between USB-2 and USB-3 initialization */
593 pm_runtime_get_noresume(&dev->dev);
594
595 /* Register the USB 2.0 roothub.
596 * FIXME: USB core must know to register the USB 2.0 roothub first.
597 * This is sort of silly, because we could just set the HCD driver flags
598 * to say USB 2.0, but I'm not sure what the implications would be in
599 * the other parts of the HCD code.
600 */
601 retval = usb_hcd_pci_probe(dev, &xhci_pci_hc_driver);
602
603 if (retval)
604 goto put_runtime_pm;
605
606 /* USB 2.0 roothub is stored in the PCI device now. */
607 hcd = dev_get_drvdata(&dev->dev);
608 xhci = hcd_to_xhci(hcd);
609 xhci->reset = reset;
610 xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev,
611 pci_name(dev), hcd);
612 if (!xhci->shared_hcd) {
613 retval = -ENOMEM;
614 goto dealloc_usb2_hcd;
615 }
616
617 retval = xhci_ext_cap_init(xhci);
618 if (retval)
619 goto put_usb3_hcd;
620
621 retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
622 IRQF_SHARED);
623 if (retval)
624 goto put_usb3_hcd;
625 /* Roothub already marked as USB 3.0 speed */
626
627 if (!(xhci->quirks & XHCI_BROKEN_STREAMS) &&
628 HCC_MAX_PSA(xhci->hcc_params) >= 4)
629 xhci->shared_hcd->can_do_streams = 1;
630
631 /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
632 pm_runtime_put_noidle(&dev->dev);
633
634 if (pci_choose_state(dev, PMSG_SUSPEND) == PCI_D0)
635 pm_runtime_forbid(&dev->dev);
636 else if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
637 pm_runtime_allow(&dev->dev);
638
639 dma_set_max_seg_size(&dev->dev, UINT_MAX);
640
641 return 0;
642
643put_usb3_hcd:
644 usb_put_hcd(xhci->shared_hcd);
645dealloc_usb2_hcd:
646 usb_hcd_pci_remove(dev);
647put_runtime_pm:
648 pm_runtime_put_noidle(&dev->dev);
649 return retval;
650}
651
652static void xhci_pci_remove(struct pci_dev *dev)
653{
654 struct xhci_hcd *xhci;
655
656 xhci = hcd_to_xhci(pci_get_drvdata(dev));
657
658 xhci->xhc_state |= XHCI_STATE_REMOVING;
659
660 if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
661 pm_runtime_forbid(&dev->dev);
662
663 if (xhci->shared_hcd) {
664 usb_remove_hcd(xhci->shared_hcd);
665 usb_put_hcd(xhci->shared_hcd);
666 xhci->shared_hcd = NULL;
667 }
668
669 /* Workaround for spurious wakeups at shutdown with HSW */
670 if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
671 pci_set_power_state(dev, PCI_D3hot);
672
673 usb_hcd_pci_remove(dev);
674}
675
676/*
677 * In some Intel xHCI controllers, in order to get D3 working,
678 * through a vendor specific SSIC CONFIG register at offset 0x883c,
679 * SSIC PORT need to be marked as "unused" before putting xHCI
680 * into D3. After D3 exit, the SSIC port need to be marked as "used".
681 * Without this change, xHCI might not enter D3 state.
682 */
683static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend)
684{
685 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
686 u32 val;
687 void __iomem *reg;
688 int i;
689
690 for (i = 0; i < SSIC_PORT_NUM; i++) {
691 reg = (void __iomem *) xhci->cap_regs +
692 SSIC_PORT_CFG2 +
693 i * SSIC_PORT_CFG2_OFFSET;
694
695 /* Notify SSIC that SSIC profile programming is not done. */
696 val = readl(reg) & ~PROG_DONE;
697 writel(val, reg);
698
699 /* Mark SSIC port as unused(suspend) or used(resume) */
700 val = readl(reg);
701 if (suspend)
702 val |= SSIC_PORT_UNUSED;
703 else
704 val &= ~SSIC_PORT_UNUSED;
705 writel(val, reg);
706
707 /* Notify SSIC that SSIC profile programming is done */
708 val = readl(reg) | PROG_DONE;
709 writel(val, reg);
710 readl(reg);
711 }
712}
713
714/*
715 * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
716 * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
717 */
718static void xhci_pme_quirk(struct usb_hcd *hcd)
719{
720 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
721 void __iomem *reg;
722 u32 val;
723
724 reg = (void __iomem *) xhci->cap_regs + 0x80a4;
725 val = readl(reg);
726 writel(val | BIT(28), reg);
727 readl(reg);
728}
729
730static void xhci_sparse_control_quirk(struct usb_hcd *hcd)
731{
732 u32 reg;
733
734 reg = readl(hcd->regs + SPARSE_CNTL_ENABLE);
735 reg &= ~BIT(SPARSE_DISABLE_BIT);
736 writel(reg, hcd->regs + SPARSE_CNTL_ENABLE);
737}
738
739static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
740{
741 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
742 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
743 int ret;
744
745 /*
746 * Systems with the TI redriver that loses port status change events
747 * need to have the registers polled during D3, so avoid D3cold.
748 */
749 if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
750 pci_d3cold_disable(pdev);
751
752#ifdef CONFIG_SUSPEND
753 /* d3cold is broken, but only when s2idle is used */
754 if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE &&
755 xhci->quirks & (XHCI_BROKEN_D3COLD_S2I))
756 pci_d3cold_disable(pdev);
757#endif
758
759 if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
760 xhci_pme_quirk(hcd);
761
762 if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
763 xhci_ssic_port_unused_quirk(hcd, true);
764
765 if (xhci->quirks & XHCI_DISABLE_SPARSE)
766 xhci_sparse_control_quirk(hcd);
767
768 ret = xhci_suspend(xhci, do_wakeup);
769
770 /* synchronize irq when using MSI-X */
771 xhci_msix_sync_irqs(xhci);
772
773 if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED))
774 xhci_ssic_port_unused_quirk(hcd, false);
775
776 return ret;
777}
778
779static int xhci_pci_resume(struct usb_hcd *hcd, pm_message_t msg)
780{
781 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
782 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
783 int retval = 0;
784
785 reset_control_reset(xhci->reset);
786
787 /* The BIOS on systems with the Intel Panther Point chipset may or may
788 * not support xHCI natively. That means that during system resume, it
789 * may switch the ports back to EHCI so that users can use their
790 * keyboard to select a kernel from GRUB after resume from hibernate.
791 *
792 * The BIOS is supposed to remember whether the OS had xHCI ports
793 * enabled before resume, and switch the ports back to xHCI when the
794 * BIOS/OS semaphore is written, but we all know we can't trust BIOS
795 * writers.
796 *
797 * Unconditionally switch the ports back to xHCI after a system resume.
798 * It should not matter whether the EHCI or xHCI controller is
799 * resumed first. It's enough to do the switchover in xHCI because
800 * USB core won't notice anything as the hub driver doesn't start
801 * running again until after all the devices (including both EHCI and
802 * xHCI host controllers) have been resumed.
803 */
804
805 if (pdev->vendor == PCI_VENDOR_ID_INTEL)
806 usb_enable_intel_xhci_ports(pdev);
807
808 if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
809 xhci_ssic_port_unused_quirk(hcd, false);
810
811 if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
812 xhci_pme_quirk(hcd);
813
814 retval = xhci_resume(xhci, msg);
815 return retval;
816}
817
818static int xhci_pci_poweroff_late(struct usb_hcd *hcd, bool do_wakeup)
819{
820 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
821 struct xhci_port *port;
822 struct usb_device *udev;
823 unsigned int slot_id;
824 u32 portsc;
825 int i;
826
827 /*
828 * Systems with XHCI_RESET_TO_DEFAULT quirk have boot firmware that
829 * cause significant boot delay if usb ports are in suspended U3 state
830 * during boot. Some USB devices survive in U3 state over S4 hibernate
831 *
832 * Disable ports that are in U3 if remote wake is not enabled for either
833 * host controller or connected device
834 */
835
836 if (!(xhci->quirks & XHCI_RESET_TO_DEFAULT))
837 return 0;
838
839 for (i = 0; i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
840 port = &xhci->hw_ports[i];
841 portsc = readl(port->addr);
842
843 if ((portsc & PORT_PLS_MASK) != XDEV_U3)
844 continue;
845
846 slot_id = xhci_find_slot_id_by_port(port->rhub->hcd, xhci,
847 port->hcd_portnum + 1);
848 if (!slot_id || !xhci->devs[slot_id]) {
849 xhci_err(xhci, "No dev for slot_id %d for port %d-%d in U3\n",
850 slot_id, port->rhub->hcd->self.busnum, port->hcd_portnum + 1);
851 continue;
852 }
853
854 udev = xhci->devs[slot_id]->udev;
855
856 /* if wakeup is enabled then don't disable the port */
857 if (udev->do_remote_wakeup && do_wakeup)
858 continue;
859
860 xhci_dbg(xhci, "port %d-%d in U3 without wakeup, disable it\n",
861 port->rhub->hcd->self.busnum, port->hcd_portnum + 1);
862 portsc = xhci_port_state_to_neutral(portsc);
863 writel(portsc | PORT_PE, port->addr);
864 }
865
866 return 0;
867}
868
869static void xhci_pci_shutdown(struct usb_hcd *hcd)
870{
871 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
872 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
873
874 xhci_shutdown(hcd);
875 xhci_cleanup_msix(xhci);
876
877 /* Yet another workaround for spurious wakeups at shutdown with HSW */
878 if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
879 pci_set_power_state(pdev, PCI_D3hot);
880}
881
882/*-------------------------------------------------------------------------*/
883
884static const struct xhci_driver_data reneses_data = {
885 .quirks = XHCI_RENESAS_FW_QUIRK,
886 .firmware = "renesas_usb_fw.mem",
887};
888
889/* PCI driver selection metadata; PCI hotplugging uses this */
890static const struct pci_device_id pci_ids[] = {
891 { PCI_DEVICE(0x1912, 0x0014),
892 .driver_data = (unsigned long)&reneses_data,
893 },
894 { PCI_DEVICE(0x1912, 0x0015),
895 .driver_data = (unsigned long)&reneses_data,
896 },
897 /* handle any USB 3.0 xHCI controller */
898 { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
899 },
900 { /* end: all zeroes */ }
901};
902MODULE_DEVICE_TABLE(pci, pci_ids);
903
904/*
905 * Without CONFIG_USB_XHCI_PCI_RENESAS renesas_xhci_check_request_fw() won't
906 * load firmware, so don't encumber the xhci-pci driver with it.
907 */
908#if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS)
909MODULE_FIRMWARE("renesas_usb_fw.mem");
910#endif
911
912/* pci driver glue; this is a "new style" PCI driver module */
913static struct pci_driver xhci_pci_driver = {
914 .name = hcd_name,
915 .id_table = pci_ids,
916
917 .probe = xhci_pci_probe,
918 .remove = xhci_pci_remove,
919 /* suspend and resume implemented later */
920
921 .shutdown = usb_hcd_pci_shutdown,
922 .driver = {
923 .pm = pm_ptr(&usb_hcd_pci_pm_ops),
924 },
925};
926
927static int __init xhci_pci_init(void)
928{
929 xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides);
930 xhci_pci_hc_driver.pci_suspend = pm_ptr(xhci_pci_suspend);
931 xhci_pci_hc_driver.pci_resume = pm_ptr(xhci_pci_resume);
932 xhci_pci_hc_driver.pci_poweroff_late = pm_ptr(xhci_pci_poweroff_late);
933 xhci_pci_hc_driver.shutdown = pm_ptr(xhci_pci_shutdown);
934 xhci_pci_hc_driver.stop = xhci_pci_stop;
935 return pci_register_driver(&xhci_pci_driver);
936}
937module_init(xhci_pci_init);
938
939static void __exit xhci_pci_exit(void)
940{
941 pci_unregister_driver(&xhci_pci_driver);
942}
943module_exit(xhci_pci_exit);
944
945MODULE_DESCRIPTION("xHCI PCI Host Controller Driver");
946MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * xHCI host controller driver PCI Bus Glue.
4 *
5 * Copyright (C) 2008 Intel Corp.
6 *
7 * Author: Sarah Sharp
8 * Some code borrowed from the Linux EHCI driver.
9 */
10
11#include <linux/pci.h>
12#include <linux/slab.h>
13#include <linux/module.h>
14#include <linux/acpi.h>
15
16#include "xhci.h"
17#include "xhci-trace.h"
18
19#define SSIC_PORT_NUM 2
20#define SSIC_PORT_CFG2 0x880c
21#define SSIC_PORT_CFG2_OFFSET 0x30
22#define PROG_DONE (1 << 30)
23#define SSIC_PORT_UNUSED (1 << 31)
24
25/* Device for a quirk */
26#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
27#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
28#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009
29#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400
30
31#define PCI_VENDOR_ID_ETRON 0x1b6f
32#define PCI_DEVICE_ID_EJ168 0x7023
33
34#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31
35#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31
36#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI 0x9cb1
37#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5
38#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f
39#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f
40#define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8
41#define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8
42#define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8
43#define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0
44#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI 0x15b5
45#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI 0x15b6
46#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI 0x15db
47#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI 0x15d4
48#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI 0x15e9
49#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI 0x15ec
50#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI 0x15f0
51
52#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9
53#define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba
54#define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb
55#define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc
56#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142
57
58static const char hcd_name[] = "xhci_hcd";
59
60static struct hc_driver __read_mostly xhci_pci_hc_driver;
61
62static int xhci_pci_setup(struct usb_hcd *hcd);
63
64static const struct xhci_driver_overrides xhci_pci_overrides __initconst = {
65 .reset = xhci_pci_setup,
66};
67
68/* called after powerup, by probe or system-pm "wakeup" */
69static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
70{
71 /*
72 * TODO: Implement finding debug ports later.
73 * TODO: see if there are any quirks that need to be added to handle
74 * new extended capabilities.
75 */
76
77 /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
78 if (!pci_set_mwi(pdev))
79 xhci_dbg(xhci, "MWI active\n");
80
81 xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
82 return 0;
83}
84
85static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
86{
87 struct pci_dev *pdev = to_pci_dev(dev);
88
89 /* Look for vendor-specific quirks */
90 if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
91 (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
92 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
93 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
94 pdev->revision == 0x0) {
95 xhci->quirks |= XHCI_RESET_EP_QUIRK;
96 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
97 "QUIRK: Fresco Logic xHC needs configure"
98 " endpoint cmd after reset endpoint");
99 }
100 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
101 pdev->revision == 0x4) {
102 xhci->quirks |= XHCI_SLOW_SUSPEND;
103 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
104 "QUIRK: Fresco Logic xHC revision %u"
105 "must be suspended extra slowly",
106 pdev->revision);
107 }
108 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK)
109 xhci->quirks |= XHCI_BROKEN_STREAMS;
110 /* Fresco Logic confirms: all revisions of this chip do not
111 * support MSI, even though some of them claim to in their PCI
112 * capabilities.
113 */
114 xhci->quirks |= XHCI_BROKEN_MSI;
115 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
116 "QUIRK: Fresco Logic revision %u "
117 "has broken MSI implementation",
118 pdev->revision);
119 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
120 }
121
122 if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
123 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009)
124 xhci->quirks |= XHCI_BROKEN_STREAMS;
125
126 if (pdev->vendor == PCI_VENDOR_ID_NEC)
127 xhci->quirks |= XHCI_NEC_HOST;
128
129 if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
130 xhci->quirks |= XHCI_AMD_0x96_HOST;
131
132 /* AMD PLL quirk */
133 if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_quirk_pll_check())
134 xhci->quirks |= XHCI_AMD_PLL_FIX;
135
136 if (pdev->vendor == PCI_VENDOR_ID_AMD &&
137 (pdev->device == 0x15e0 ||
138 pdev->device == 0x15e1 ||
139 pdev->device == 0x43bb))
140 xhci->quirks |= XHCI_SUSPEND_DELAY;
141
142 if (pdev->vendor == PCI_VENDOR_ID_AMD &&
143 (pdev->device == 0x15e0 || pdev->device == 0x15e1))
144 xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND;
145
146 if (pdev->vendor == PCI_VENDOR_ID_AMD)
147 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
148
149 if ((pdev->vendor == PCI_VENDOR_ID_AMD) &&
150 ((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) ||
151 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) ||
152 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) ||
153 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1)))
154 xhci->quirks |= XHCI_U2_DISABLE_WAKE;
155
156 if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
157 xhci->quirks |= XHCI_LPM_SUPPORT;
158 xhci->quirks |= XHCI_INTEL_HOST;
159 xhci->quirks |= XHCI_AVOID_BEI;
160 }
161 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
162 pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
163 xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
164 xhci->limit_active_eps = 64;
165 xhci->quirks |= XHCI_SW_BW_CHECKING;
166 /*
167 * PPT desktop boards DH77EB and DH77DF will power back on after
168 * a few seconds of being shutdown. The fix for this is to
169 * switch the ports from xHCI to EHCI on shutdown. We can't use
170 * DMI information to find those particular boards (since each
171 * vendor will change the board name), so we have to key off all
172 * PPT chipsets.
173 */
174 xhci->quirks |= XHCI_SPURIOUS_REBOOT;
175 }
176 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
177 (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI ||
178 pdev->device == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI)) {
179 xhci->quirks |= XHCI_SPURIOUS_REBOOT;
180 xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
181 }
182 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
183 (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
184 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
185 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
186 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
187 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI ||
188 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
189 pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) {
190 xhci->quirks |= XHCI_PME_STUCK_QUIRK;
191 }
192 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
193 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)
194 xhci->quirks |= XHCI_SSIC_PORT_UNUSED;
195 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
196 (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
197 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
198 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI))
199 xhci->quirks |= XHCI_INTEL_USB_ROLE_SW;
200 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
201 (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
202 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
203 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
204 pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
205 pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI))
206 xhci->quirks |= XHCI_MISSING_CAS;
207
208 if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
209 (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI ||
210 pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI ||
211 pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI ||
212 pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI ||
213 pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI ||
214 pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI ||
215 pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI))
216 xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
217
218 if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
219 pdev->device == PCI_DEVICE_ID_EJ168) {
220 xhci->quirks |= XHCI_RESET_ON_RESUME;
221 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
222 xhci->quirks |= XHCI_BROKEN_STREAMS;
223 }
224 if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
225 pdev->device == 0x0014) {
226 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
227 xhci->quirks |= XHCI_ZERO_64B_REGS;
228 }
229 if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
230 pdev->device == 0x0015) {
231 xhci->quirks |= XHCI_RESET_ON_RESUME;
232 xhci->quirks |= XHCI_ZERO_64B_REGS;
233 }
234 if (pdev->vendor == PCI_VENDOR_ID_VIA)
235 xhci->quirks |= XHCI_RESET_ON_RESUME;
236
237 /* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
238 if (pdev->vendor == PCI_VENDOR_ID_VIA &&
239 pdev->device == 0x3432)
240 xhci->quirks |= XHCI_BROKEN_STREAMS;
241
242 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
243 pdev->device == 0x1042)
244 xhci->quirks |= XHCI_BROKEN_STREAMS;
245 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
246 pdev->device == 0x1142)
247 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
248
249 if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
250 pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)
251 xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL;
252
253 if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241)
254 xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
255
256 if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM ||
257 pdev->vendor == PCI_VENDOR_ID_CAVIUM) &&
258 pdev->device == 0x9026)
259 xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT;
260
261 if (xhci->quirks & XHCI_RESET_ON_RESUME)
262 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
263 "QUIRK: Resetting on resume");
264}
265
266#ifdef CONFIG_ACPI
267static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
268{
269 static const guid_t intel_dsm_guid =
270 GUID_INIT(0xac340cb7, 0xe901, 0x45bf,
271 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23);
272 union acpi_object *obj;
273
274 obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), &intel_dsm_guid, 3, 1,
275 NULL);
276 ACPI_FREE(obj);
277}
278#else
279static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
280#endif /* CONFIG_ACPI */
281
282/* called during probe() after chip reset completes */
283static int xhci_pci_setup(struct usb_hcd *hcd)
284{
285 struct xhci_hcd *xhci;
286 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
287 int retval;
288
289 xhci = hcd_to_xhci(hcd);
290 if (!xhci->sbrn)
291 pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
292
293 /* imod_interval is the interrupt moderation value in nanoseconds. */
294 xhci->imod_interval = 40000;
295
296 retval = xhci_gen_setup(hcd, xhci_pci_quirks);
297 if (retval)
298 return retval;
299
300 if (!usb_hcd_is_primary_hcd(hcd))
301 return 0;
302
303 xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
304
305 /* Find any debug ports */
306 return xhci_pci_reinit(xhci, pdev);
307}
308
309/*
310 * We need to register our own PCI probe function (instead of the USB core's
311 * function) in order to create a second roothub under xHCI.
312 */
313static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
314{
315 int retval;
316 struct xhci_hcd *xhci;
317 struct hc_driver *driver;
318 struct usb_hcd *hcd;
319
320 driver = (struct hc_driver *)id->driver_data;
321
322 /* Prevent runtime suspending between USB-2 and USB-3 initialization */
323 pm_runtime_get_noresume(&dev->dev);
324
325 /* Register the USB 2.0 roothub.
326 * FIXME: USB core must know to register the USB 2.0 roothub first.
327 * This is sort of silly, because we could just set the HCD driver flags
328 * to say USB 2.0, but I'm not sure what the implications would be in
329 * the other parts of the HCD code.
330 */
331 retval = usb_hcd_pci_probe(dev, id);
332
333 if (retval)
334 goto put_runtime_pm;
335
336 /* USB 2.0 roothub is stored in the PCI device now. */
337 hcd = dev_get_drvdata(&dev->dev);
338 xhci = hcd_to_xhci(hcd);
339 xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev,
340 pci_name(dev), hcd);
341 if (!xhci->shared_hcd) {
342 retval = -ENOMEM;
343 goto dealloc_usb2_hcd;
344 }
345
346 retval = xhci_ext_cap_init(xhci);
347 if (retval)
348 goto put_usb3_hcd;
349
350 retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
351 IRQF_SHARED);
352 if (retval)
353 goto put_usb3_hcd;
354 /* Roothub already marked as USB 3.0 speed */
355
356 if (!(xhci->quirks & XHCI_BROKEN_STREAMS) &&
357 HCC_MAX_PSA(xhci->hcc_params) >= 4)
358 xhci->shared_hcd->can_do_streams = 1;
359
360 if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
361 xhci_pme_acpi_rtd3_enable(dev);
362
363 /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
364 pm_runtime_put_noidle(&dev->dev);
365
366 if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
367 pm_runtime_allow(&dev->dev);
368
369 return 0;
370
371put_usb3_hcd:
372 usb_put_hcd(xhci->shared_hcd);
373dealloc_usb2_hcd:
374 usb_hcd_pci_remove(dev);
375put_runtime_pm:
376 pm_runtime_put_noidle(&dev->dev);
377 return retval;
378}
379
380static void xhci_pci_remove(struct pci_dev *dev)
381{
382 struct xhci_hcd *xhci;
383
384 xhci = hcd_to_xhci(pci_get_drvdata(dev));
385 xhci->xhc_state |= XHCI_STATE_REMOVING;
386
387 if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
388 pm_runtime_forbid(&dev->dev);
389
390 if (xhci->shared_hcd) {
391 usb_remove_hcd(xhci->shared_hcd);
392 usb_put_hcd(xhci->shared_hcd);
393 xhci->shared_hcd = NULL;
394 }
395
396 /* Workaround for spurious wakeups at shutdown with HSW */
397 if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
398 pci_set_power_state(dev, PCI_D3hot);
399
400 usb_hcd_pci_remove(dev);
401}
402
403#ifdef CONFIG_PM
404/*
405 * In some Intel xHCI controllers, in order to get D3 working,
406 * through a vendor specific SSIC CONFIG register at offset 0x883c,
407 * SSIC PORT need to be marked as "unused" before putting xHCI
408 * into D3. After D3 exit, the SSIC port need to be marked as "used".
409 * Without this change, xHCI might not enter D3 state.
410 */
411static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend)
412{
413 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
414 u32 val;
415 void __iomem *reg;
416 int i;
417
418 for (i = 0; i < SSIC_PORT_NUM; i++) {
419 reg = (void __iomem *) xhci->cap_regs +
420 SSIC_PORT_CFG2 +
421 i * SSIC_PORT_CFG2_OFFSET;
422
423 /* Notify SSIC that SSIC profile programming is not done. */
424 val = readl(reg) & ~PROG_DONE;
425 writel(val, reg);
426
427 /* Mark SSIC port as unused(suspend) or used(resume) */
428 val = readl(reg);
429 if (suspend)
430 val |= SSIC_PORT_UNUSED;
431 else
432 val &= ~SSIC_PORT_UNUSED;
433 writel(val, reg);
434
435 /* Notify SSIC that SSIC profile programming is done */
436 val = readl(reg) | PROG_DONE;
437 writel(val, reg);
438 readl(reg);
439 }
440}
441
442/*
443 * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
444 * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
445 */
446static void xhci_pme_quirk(struct usb_hcd *hcd)
447{
448 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
449 void __iomem *reg;
450 u32 val;
451
452 reg = (void __iomem *) xhci->cap_regs + 0x80a4;
453 val = readl(reg);
454 writel(val | BIT(28), reg);
455 readl(reg);
456}
457
458static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
459{
460 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
461 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
462 int ret;
463
464 /*
465 * Systems with the TI redriver that loses port status change events
466 * need to have the registers polled during D3, so avoid D3cold.
467 */
468 if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
469 pci_d3cold_disable(pdev);
470
471 if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
472 xhci_pme_quirk(hcd);
473
474 if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
475 xhci_ssic_port_unused_quirk(hcd, true);
476
477 ret = xhci_suspend(xhci, do_wakeup);
478 if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED))
479 xhci_ssic_port_unused_quirk(hcd, false);
480
481 return ret;
482}
483
484static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
485{
486 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
487 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
488 int retval = 0;
489
490 /* The BIOS on systems with the Intel Panther Point chipset may or may
491 * not support xHCI natively. That means that during system resume, it
492 * may switch the ports back to EHCI so that users can use their
493 * keyboard to select a kernel from GRUB after resume from hibernate.
494 *
495 * The BIOS is supposed to remember whether the OS had xHCI ports
496 * enabled before resume, and switch the ports back to xHCI when the
497 * BIOS/OS semaphore is written, but we all know we can't trust BIOS
498 * writers.
499 *
500 * Unconditionally switch the ports back to xHCI after a system resume.
501 * It should not matter whether the EHCI or xHCI controller is
502 * resumed first. It's enough to do the switchover in xHCI because
503 * USB core won't notice anything as the hub driver doesn't start
504 * running again until after all the devices (including both EHCI and
505 * xHCI host controllers) have been resumed.
506 */
507
508 if (pdev->vendor == PCI_VENDOR_ID_INTEL)
509 usb_enable_intel_xhci_ports(pdev);
510
511 if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
512 xhci_ssic_port_unused_quirk(hcd, false);
513
514 if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
515 xhci_pme_quirk(hcd);
516
517 retval = xhci_resume(xhci, hibernated);
518 return retval;
519}
520#endif /* CONFIG_PM */
521
522/*-------------------------------------------------------------------------*/
523
524/* PCI driver selection metadata; PCI hotplugging uses this */
525static const struct pci_device_id pci_ids[] = { {
526 /* handle any USB 3.0 xHCI controller */
527 PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
528 .driver_data = (unsigned long) &xhci_pci_hc_driver,
529 },
530 { /* end: all zeroes */ }
531};
532MODULE_DEVICE_TABLE(pci, pci_ids);
533
534/* pci driver glue; this is a "new style" PCI driver module */
535static struct pci_driver xhci_pci_driver = {
536 .name = (char *) hcd_name,
537 .id_table = pci_ids,
538
539 .probe = xhci_pci_probe,
540 .remove = xhci_pci_remove,
541 /* suspend and resume implemented later */
542
543 .shutdown = usb_hcd_pci_shutdown,
544#ifdef CONFIG_PM
545 .driver = {
546 .pm = &usb_hcd_pci_pm_ops
547 },
548#endif
549};
550
551static int __init xhci_pci_init(void)
552{
553 xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides);
554#ifdef CONFIG_PM
555 xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
556 xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
557#endif
558 return pci_register_driver(&xhci_pci_driver);
559}
560module_init(xhci_pci_init);
561
562static void __exit xhci_pci_exit(void)
563{
564 pci_unregister_driver(&xhci_pci_driver);
565}
566module_exit(xhci_pci_exit);
567
568MODULE_DESCRIPTION("xHCI PCI Host Controller Driver");
569MODULE_LICENSE("GPL");