Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2012-2015 Spreadtrum Communications Inc.
4 */
5
6#include <linux/clk.h>
7#include <linux/console.h>
8#include <linux/delay.h>
9#include <linux/dmaengine.h>
10#include <linux/dma-mapping.h>
11#include <linux/dma/sprd-dma.h>
12#include <linux/io.h>
13#include <linux/ioport.h>
14#include <linux/kernel.h>
15#include <linux/module.h>
16#include <linux/of.h>
17#include <linux/platform_device.h>
18#include <linux/serial_core.h>
19#include <linux/serial.h>
20#include <linux/slab.h>
21#include <linux/tty.h>
22#include <linux/tty_flip.h>
23
24/* device name */
25#define UART_NR_MAX 8
26#define SPRD_TTY_NAME "ttyS"
27#define SPRD_FIFO_SIZE 128
28#define SPRD_DEF_RATE 26000000
29#define SPRD_BAUD_IO_LIMIT 3000000
30#define SPRD_TIMEOUT 256000
31
32/* the offset of serial registers and BITs for them */
33/* data registers */
34#define SPRD_TXD 0x0000
35#define SPRD_RXD 0x0004
36
37/* line status register and its BITs */
38#define SPRD_LSR 0x0008
39#define SPRD_LSR_OE BIT(4)
40#define SPRD_LSR_FE BIT(3)
41#define SPRD_LSR_PE BIT(2)
42#define SPRD_LSR_BI BIT(7)
43#define SPRD_LSR_TX_OVER BIT(15)
44
45/* data number in TX and RX fifo */
46#define SPRD_STS1 0x000C
47#define SPRD_RX_FIFO_CNT_MASK GENMASK(7, 0)
48#define SPRD_TX_FIFO_CNT_MASK GENMASK(15, 8)
49
50/* interrupt enable register and its BITs */
51#define SPRD_IEN 0x0010
52#define SPRD_IEN_RX_FULL BIT(0)
53#define SPRD_IEN_TX_EMPTY BIT(1)
54#define SPRD_IEN_BREAK_DETECT BIT(7)
55#define SPRD_IEN_TIMEOUT BIT(13)
56
57/* interrupt clear register */
58#define SPRD_ICLR 0x0014
59#define SPRD_ICLR_TIMEOUT BIT(13)
60
61/* line control register */
62#define SPRD_LCR 0x0018
63#define SPRD_LCR_STOP_1BIT 0x10
64#define SPRD_LCR_STOP_2BIT 0x30
65#define SPRD_LCR_DATA_LEN (BIT(2) | BIT(3))
66#define SPRD_LCR_DATA_LEN5 0x0
67#define SPRD_LCR_DATA_LEN6 0x4
68#define SPRD_LCR_DATA_LEN7 0x8
69#define SPRD_LCR_DATA_LEN8 0xc
70#define SPRD_LCR_PARITY (BIT(0) | BIT(1))
71#define SPRD_LCR_PARITY_EN 0x2
72#define SPRD_LCR_EVEN_PAR 0x0
73#define SPRD_LCR_ODD_PAR 0x1
74
75/* control register 1 */
76#define SPRD_CTL1 0x001C
77#define SPRD_DMA_EN BIT(15)
78#define SPRD_LOOPBACK_EN BIT(14)
79#define RX_HW_FLOW_CTL_THLD BIT(6)
80#define RX_HW_FLOW_CTL_EN BIT(7)
81#define TX_HW_FLOW_CTL_EN BIT(8)
82#define RX_TOUT_THLD_DEF 0x3E00
83#define RX_HFC_THLD_DEF 0x40
84
85/* fifo threshold register */
86#define SPRD_CTL2 0x0020
87#define THLD_TX_EMPTY 0x40
88#define THLD_TX_EMPTY_SHIFT 8
89#define THLD_RX_FULL 0x40
90#define THLD_RX_FULL_MASK GENMASK(6, 0)
91
92/* config baud rate register */
93#define SPRD_CLKD0 0x0024
94#define SPRD_CLKD0_MASK GENMASK(15, 0)
95#define SPRD_CLKD1 0x0028
96#define SPRD_CLKD1_MASK GENMASK(20, 16)
97#define SPRD_CLKD1_SHIFT 16
98
99/* interrupt mask status register */
100#define SPRD_IMSR 0x002C
101#define SPRD_IMSR_RX_FIFO_FULL BIT(0)
102#define SPRD_IMSR_TX_FIFO_EMPTY BIT(1)
103#define SPRD_IMSR_BREAK_DETECT BIT(7)
104#define SPRD_IMSR_TIMEOUT BIT(13)
105#define SPRD_DEFAULT_SOURCE_CLK 26000000
106
107#define SPRD_RX_DMA_STEP 1
108#define SPRD_RX_FIFO_FULL 1
109#define SPRD_TX_FIFO_FULL 0x20
110#define SPRD_UART_RX_SIZE (UART_XMIT_SIZE / 4)
111
112struct sprd_uart_dma {
113 struct dma_chan *chn;
114 unsigned char *virt;
115 dma_addr_t phys_addr;
116 dma_cookie_t cookie;
117 u32 trans_len;
118 bool enable;
119};
120
121struct sprd_uart_port {
122 struct uart_port port;
123 char name[16];
124 struct clk *clk;
125 struct sprd_uart_dma tx_dma;
126 struct sprd_uart_dma rx_dma;
127 dma_addr_t pos;
128 unsigned char *rx_buf_tail;
129};
130
131static struct sprd_uart_port *sprd_port[UART_NR_MAX];
132static int sprd_ports_num;
133
134static int sprd_start_dma_rx(struct uart_port *port);
135static int sprd_tx_dma_config(struct uart_port *port);
136
137static inline unsigned int serial_in(struct uart_port *port,
138 unsigned int offset)
139{
140 return readl_relaxed(port->membase + offset);
141}
142
143static inline void serial_out(struct uart_port *port, unsigned int offset,
144 int value)
145{
146 writel_relaxed(value, port->membase + offset);
147}
148
149static unsigned int sprd_tx_empty(struct uart_port *port)
150{
151 if (serial_in(port, SPRD_STS1) & SPRD_TX_FIFO_CNT_MASK)
152 return 0;
153 else
154 return TIOCSER_TEMT;
155}
156
157static unsigned int sprd_get_mctrl(struct uart_port *port)
158{
159 return TIOCM_DSR | TIOCM_CTS;
160}
161
162static void sprd_set_mctrl(struct uart_port *port, unsigned int mctrl)
163{
164 u32 val = serial_in(port, SPRD_CTL1);
165
166 if (mctrl & TIOCM_LOOP)
167 val |= SPRD_LOOPBACK_EN;
168 else
169 val &= ~SPRD_LOOPBACK_EN;
170
171 serial_out(port, SPRD_CTL1, val);
172}
173
174static void sprd_stop_rx(struct uart_port *port)
175{
176 struct sprd_uart_port *sp =
177 container_of(port, struct sprd_uart_port, port);
178 unsigned int ien, iclr;
179
180 if (sp->rx_dma.enable)
181 dmaengine_terminate_all(sp->rx_dma.chn);
182
183 iclr = serial_in(port, SPRD_ICLR);
184 ien = serial_in(port, SPRD_IEN);
185
186 ien &= ~(SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT);
187 iclr |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT;
188
189 serial_out(port, SPRD_IEN, ien);
190 serial_out(port, SPRD_ICLR, iclr);
191}
192
193static void sprd_uart_dma_enable(struct uart_port *port, bool enable)
194{
195 u32 val = serial_in(port, SPRD_CTL1);
196
197 if (enable)
198 val |= SPRD_DMA_EN;
199 else
200 val &= ~SPRD_DMA_EN;
201
202 serial_out(port, SPRD_CTL1, val);
203}
204
205static void sprd_stop_tx_dma(struct uart_port *port)
206{
207 struct sprd_uart_port *sp =
208 container_of(port, struct sprd_uart_port, port);
209 struct dma_tx_state state;
210 u32 trans_len;
211
212 dmaengine_pause(sp->tx_dma.chn);
213
214 dmaengine_tx_status(sp->tx_dma.chn, sp->tx_dma.cookie, &state);
215 if (state.residue) {
216 trans_len = state.residue - sp->tx_dma.phys_addr;
217 uart_xmit_advance(port, trans_len);
218 dma_unmap_single(port->dev, sp->tx_dma.phys_addr,
219 sp->tx_dma.trans_len, DMA_TO_DEVICE);
220 }
221
222 dmaengine_terminate_all(sp->tx_dma.chn);
223 sp->tx_dma.trans_len = 0;
224}
225
226static int sprd_tx_buf_remap(struct uart_port *port)
227{
228 struct sprd_uart_port *sp =
229 container_of(port, struct sprd_uart_port, port);
230 struct circ_buf *xmit = &port->state->xmit;
231
232 sp->tx_dma.trans_len =
233 CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
234
235 sp->tx_dma.phys_addr = dma_map_single(port->dev,
236 (void *)&(xmit->buf[xmit->tail]),
237 sp->tx_dma.trans_len,
238 DMA_TO_DEVICE);
239 return dma_mapping_error(port->dev, sp->tx_dma.phys_addr);
240}
241
242static void sprd_complete_tx_dma(void *data)
243{
244 struct uart_port *port = (struct uart_port *)data;
245 struct sprd_uart_port *sp =
246 container_of(port, struct sprd_uart_port, port);
247 struct circ_buf *xmit = &port->state->xmit;
248 unsigned long flags;
249
250 uart_port_lock_irqsave(port, &flags);
251 dma_unmap_single(port->dev, sp->tx_dma.phys_addr,
252 sp->tx_dma.trans_len, DMA_TO_DEVICE);
253
254 uart_xmit_advance(port, sp->tx_dma.trans_len);
255
256 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
257 uart_write_wakeup(port);
258
259 if (uart_circ_empty(xmit) || sprd_tx_buf_remap(port) ||
260 sprd_tx_dma_config(port))
261 sp->tx_dma.trans_len = 0;
262
263 uart_port_unlock_irqrestore(port, flags);
264}
265
266static int sprd_uart_dma_submit(struct uart_port *port,
267 struct sprd_uart_dma *ud, u32 trans_len,
268 enum dma_transfer_direction direction,
269 dma_async_tx_callback callback)
270{
271 struct dma_async_tx_descriptor *dma_des;
272 unsigned long flags;
273
274 flags = SPRD_DMA_FLAGS(SPRD_DMA_CHN_MODE_NONE,
275 SPRD_DMA_NO_TRG,
276 SPRD_DMA_FRAG_REQ,
277 SPRD_DMA_TRANS_INT);
278
279 dma_des = dmaengine_prep_slave_single(ud->chn, ud->phys_addr, trans_len,
280 direction, flags);
281 if (!dma_des)
282 return -ENODEV;
283
284 dma_des->callback = callback;
285 dma_des->callback_param = port;
286
287 ud->cookie = dmaengine_submit(dma_des);
288 if (dma_submit_error(ud->cookie))
289 return dma_submit_error(ud->cookie);
290
291 dma_async_issue_pending(ud->chn);
292
293 return 0;
294}
295
296static int sprd_tx_dma_config(struct uart_port *port)
297{
298 struct sprd_uart_port *sp =
299 container_of(port, struct sprd_uart_port, port);
300 u32 burst = sp->tx_dma.trans_len > SPRD_TX_FIFO_FULL ?
301 SPRD_TX_FIFO_FULL : sp->tx_dma.trans_len;
302 int ret;
303 struct dma_slave_config cfg = {
304 .dst_addr = port->mapbase + SPRD_TXD,
305 .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
306 .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
307 .src_maxburst = burst,
308 };
309
310 ret = dmaengine_slave_config(sp->tx_dma.chn, &cfg);
311 if (ret < 0)
312 return ret;
313
314 return sprd_uart_dma_submit(port, &sp->tx_dma, sp->tx_dma.trans_len,
315 DMA_MEM_TO_DEV, sprd_complete_tx_dma);
316}
317
318static void sprd_start_tx_dma(struct uart_port *port)
319{
320 struct sprd_uart_port *sp =
321 container_of(port, struct sprd_uart_port, port);
322 struct circ_buf *xmit = &port->state->xmit;
323
324 if (port->x_char) {
325 serial_out(port, SPRD_TXD, port->x_char);
326 port->icount.tx++;
327 port->x_char = 0;
328 return;
329 }
330
331 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
332 sprd_stop_tx_dma(port);
333 return;
334 }
335
336 if (sp->tx_dma.trans_len)
337 return;
338
339 if (sprd_tx_buf_remap(port) || sprd_tx_dma_config(port))
340 sp->tx_dma.trans_len = 0;
341}
342
343static void sprd_rx_full_thld(struct uart_port *port, u32 thld)
344{
345 u32 val = serial_in(port, SPRD_CTL2);
346
347 val &= ~THLD_RX_FULL_MASK;
348 val |= thld & THLD_RX_FULL_MASK;
349 serial_out(port, SPRD_CTL2, val);
350}
351
352static int sprd_rx_alloc_buf(struct sprd_uart_port *sp)
353{
354 sp->rx_dma.virt = dma_alloc_coherent(sp->port.dev, SPRD_UART_RX_SIZE,
355 &sp->rx_dma.phys_addr, GFP_KERNEL);
356 if (!sp->rx_dma.virt)
357 return -ENOMEM;
358
359 return 0;
360}
361
362static void sprd_rx_free_buf(struct sprd_uart_port *sp)
363{
364 if (sp->rx_dma.virt)
365 dma_free_coherent(sp->port.dev, SPRD_UART_RX_SIZE,
366 sp->rx_dma.virt, sp->rx_dma.phys_addr);
367 sp->rx_dma.virt = NULL;
368}
369
370static int sprd_rx_dma_config(struct uart_port *port, u32 burst)
371{
372 struct sprd_uart_port *sp =
373 container_of(port, struct sprd_uart_port, port);
374 struct dma_slave_config cfg = {
375 .src_addr = port->mapbase + SPRD_RXD,
376 .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
377 .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
378 .src_maxburst = burst,
379 };
380
381 return dmaengine_slave_config(sp->rx_dma.chn, &cfg);
382}
383
384static void sprd_uart_dma_rx(struct uart_port *port)
385{
386 struct sprd_uart_port *sp =
387 container_of(port, struct sprd_uart_port, port);
388 struct tty_port *tty = &port->state->port;
389
390 port->icount.rx += sp->rx_dma.trans_len;
391 tty_insert_flip_string(tty, sp->rx_buf_tail, sp->rx_dma.trans_len);
392 tty_flip_buffer_push(tty);
393}
394
395static void sprd_uart_dma_irq(struct uart_port *port)
396{
397 struct sprd_uart_port *sp =
398 container_of(port, struct sprd_uart_port, port);
399 struct dma_tx_state state;
400 enum dma_status status;
401
402 status = dmaengine_tx_status(sp->rx_dma.chn,
403 sp->rx_dma.cookie, &state);
404 if (status == DMA_ERROR)
405 sprd_stop_rx(port);
406
407 if (!state.residue && sp->pos == sp->rx_dma.phys_addr)
408 return;
409
410 if (!state.residue) {
411 sp->rx_dma.trans_len = SPRD_UART_RX_SIZE +
412 sp->rx_dma.phys_addr - sp->pos;
413 sp->pos = sp->rx_dma.phys_addr;
414 } else {
415 sp->rx_dma.trans_len = state.residue - sp->pos;
416 sp->pos = state.residue;
417 }
418
419 sprd_uart_dma_rx(port);
420 sp->rx_buf_tail += sp->rx_dma.trans_len;
421}
422
423static void sprd_complete_rx_dma(void *data)
424{
425 struct uart_port *port = (struct uart_port *)data;
426 struct sprd_uart_port *sp =
427 container_of(port, struct sprd_uart_port, port);
428 struct dma_tx_state state;
429 enum dma_status status;
430 unsigned long flags;
431
432 uart_port_lock_irqsave(port, &flags);
433
434 status = dmaengine_tx_status(sp->rx_dma.chn,
435 sp->rx_dma.cookie, &state);
436 if (status != DMA_COMPLETE) {
437 sprd_stop_rx(port);
438 uart_port_unlock_irqrestore(port, flags);
439 return;
440 }
441
442 if (sp->pos != sp->rx_dma.phys_addr) {
443 sp->rx_dma.trans_len = SPRD_UART_RX_SIZE +
444 sp->rx_dma.phys_addr - sp->pos;
445 sprd_uart_dma_rx(port);
446 sp->rx_buf_tail += sp->rx_dma.trans_len;
447 }
448
449 if (sprd_start_dma_rx(port))
450 sprd_stop_rx(port);
451
452 uart_port_unlock_irqrestore(port, flags);
453}
454
455static int sprd_start_dma_rx(struct uart_port *port)
456{
457 struct sprd_uart_port *sp =
458 container_of(port, struct sprd_uart_port, port);
459 int ret;
460
461 if (!sp->rx_dma.enable)
462 return 0;
463
464 sp->pos = sp->rx_dma.phys_addr;
465 sp->rx_buf_tail = sp->rx_dma.virt;
466 sprd_rx_full_thld(port, SPRD_RX_FIFO_FULL);
467 ret = sprd_rx_dma_config(port, SPRD_RX_DMA_STEP);
468 if (ret)
469 return ret;
470
471 return sprd_uart_dma_submit(port, &sp->rx_dma, SPRD_UART_RX_SIZE,
472 DMA_DEV_TO_MEM, sprd_complete_rx_dma);
473}
474
475static void sprd_release_dma(struct uart_port *port)
476{
477 struct sprd_uart_port *sp =
478 container_of(port, struct sprd_uart_port, port);
479
480 sprd_uart_dma_enable(port, false);
481
482 if (sp->rx_dma.enable)
483 dma_release_channel(sp->rx_dma.chn);
484
485 if (sp->tx_dma.enable)
486 dma_release_channel(sp->tx_dma.chn);
487
488 sp->tx_dma.enable = false;
489 sp->rx_dma.enable = false;
490}
491
492static void sprd_request_dma(struct uart_port *port)
493{
494 struct sprd_uart_port *sp =
495 container_of(port, struct sprd_uart_port, port);
496
497 sp->tx_dma.enable = true;
498 sp->rx_dma.enable = true;
499
500 sp->tx_dma.chn = dma_request_chan(port->dev, "tx");
501 if (IS_ERR(sp->tx_dma.chn)) {
502 dev_err(port->dev, "request TX DMA channel failed, ret = %ld\n",
503 PTR_ERR(sp->tx_dma.chn));
504 sp->tx_dma.enable = false;
505 }
506
507 sp->rx_dma.chn = dma_request_chan(port->dev, "rx");
508 if (IS_ERR(sp->rx_dma.chn)) {
509 dev_err(port->dev, "request RX DMA channel failed, ret = %ld\n",
510 PTR_ERR(sp->rx_dma.chn));
511 sp->rx_dma.enable = false;
512 }
513}
514
515static void sprd_stop_tx(struct uart_port *port)
516{
517 struct sprd_uart_port *sp = container_of(port, struct sprd_uart_port,
518 port);
519 unsigned int ien, iclr;
520
521 if (sp->tx_dma.enable) {
522 sprd_stop_tx_dma(port);
523 return;
524 }
525
526 iclr = serial_in(port, SPRD_ICLR);
527 ien = serial_in(port, SPRD_IEN);
528
529 iclr |= SPRD_IEN_TX_EMPTY;
530 ien &= ~SPRD_IEN_TX_EMPTY;
531
532 serial_out(port, SPRD_IEN, ien);
533 serial_out(port, SPRD_ICLR, iclr);
534}
535
536static void sprd_start_tx(struct uart_port *port)
537{
538 struct sprd_uart_port *sp = container_of(port, struct sprd_uart_port,
539 port);
540 unsigned int ien;
541
542 if (sp->tx_dma.enable) {
543 sprd_start_tx_dma(port);
544 return;
545 }
546
547 ien = serial_in(port, SPRD_IEN);
548 if (!(ien & SPRD_IEN_TX_EMPTY)) {
549 ien |= SPRD_IEN_TX_EMPTY;
550 serial_out(port, SPRD_IEN, ien);
551 }
552}
553
554/* The Sprd serial does not support this function. */
555static void sprd_break_ctl(struct uart_port *port, int break_state)
556{
557 /* nothing to do */
558}
559
560static int handle_lsr_errors(struct uart_port *port,
561 u8 *flag,
562 unsigned int *lsr)
563{
564 int ret = 0;
565
566 /* statistics */
567 if (*lsr & SPRD_LSR_BI) {
568 *lsr &= ~(SPRD_LSR_FE | SPRD_LSR_PE);
569 port->icount.brk++;
570 ret = uart_handle_break(port);
571 if (ret)
572 return ret;
573 } else if (*lsr & SPRD_LSR_PE)
574 port->icount.parity++;
575 else if (*lsr & SPRD_LSR_FE)
576 port->icount.frame++;
577 if (*lsr & SPRD_LSR_OE)
578 port->icount.overrun++;
579
580 /* mask off conditions which should be ignored */
581 *lsr &= port->read_status_mask;
582 if (*lsr & SPRD_LSR_BI)
583 *flag = TTY_BREAK;
584 else if (*lsr & SPRD_LSR_PE)
585 *flag = TTY_PARITY;
586 else if (*lsr & SPRD_LSR_FE)
587 *flag = TTY_FRAME;
588
589 return ret;
590}
591
592static inline void sprd_rx(struct uart_port *port)
593{
594 struct sprd_uart_port *sp = container_of(port, struct sprd_uart_port,
595 port);
596 struct tty_port *tty = &port->state->port;
597 unsigned int lsr, max_count = SPRD_TIMEOUT;
598 u8 ch, flag;
599
600 if (sp->rx_dma.enable) {
601 sprd_uart_dma_irq(port);
602 return;
603 }
604
605 while ((serial_in(port, SPRD_STS1) & SPRD_RX_FIFO_CNT_MASK) &&
606 max_count--) {
607 lsr = serial_in(port, SPRD_LSR);
608 ch = serial_in(port, SPRD_RXD);
609 flag = TTY_NORMAL;
610 port->icount.rx++;
611
612 if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE |
613 SPRD_LSR_FE | SPRD_LSR_OE))
614 if (handle_lsr_errors(port, &flag, &lsr))
615 continue;
616 if (uart_handle_sysrq_char(port, ch))
617 continue;
618
619 uart_insert_char(port, lsr, SPRD_LSR_OE, ch, flag);
620 }
621
622 tty_flip_buffer_push(tty);
623}
624
625static inline void sprd_tx(struct uart_port *port)
626{
627 u8 ch;
628
629 uart_port_tx_limited(port, ch, THLD_TX_EMPTY,
630 true,
631 serial_out(port, SPRD_TXD, ch),
632 ({}));
633}
634
635/* this handles the interrupt from one port */
636static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
637{
638 struct uart_port *port = dev_id;
639 unsigned int ims;
640
641 uart_port_lock(port);
642
643 ims = serial_in(port, SPRD_IMSR);
644
645 if (!ims) {
646 uart_port_unlock(port);
647 return IRQ_NONE;
648 }
649
650 if (ims & SPRD_IMSR_TIMEOUT)
651 serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT);
652
653 if (ims & SPRD_IMSR_BREAK_DETECT)
654 serial_out(port, SPRD_ICLR, SPRD_IMSR_BREAK_DETECT);
655
656 if (ims & (SPRD_IMSR_RX_FIFO_FULL | SPRD_IMSR_BREAK_DETECT |
657 SPRD_IMSR_TIMEOUT))
658 sprd_rx(port);
659
660 if (ims & SPRD_IMSR_TX_FIFO_EMPTY)
661 sprd_tx(port);
662
663 uart_port_unlock(port);
664
665 return IRQ_HANDLED;
666}
667
668static void sprd_uart_dma_startup(struct uart_port *port,
669 struct sprd_uart_port *sp)
670{
671 int ret;
672
673 sprd_request_dma(port);
674 if (!(sp->rx_dma.enable || sp->tx_dma.enable))
675 return;
676
677 ret = sprd_start_dma_rx(port);
678 if (ret) {
679 sp->rx_dma.enable = false;
680 dma_release_channel(sp->rx_dma.chn);
681 dev_warn(port->dev, "fail to start RX dma mode\n");
682 }
683
684 sprd_uart_dma_enable(port, true);
685}
686
687static int sprd_startup(struct uart_port *port)
688{
689 int ret = 0;
690 unsigned int ien, fc;
691 unsigned int timeout;
692 struct sprd_uart_port *sp;
693 unsigned long flags;
694
695 serial_out(port, SPRD_CTL2,
696 THLD_TX_EMPTY << THLD_TX_EMPTY_SHIFT | THLD_RX_FULL);
697
698 /* clear rx fifo */
699 timeout = SPRD_TIMEOUT;
700 while (timeout-- && serial_in(port, SPRD_STS1) & SPRD_RX_FIFO_CNT_MASK)
701 serial_in(port, SPRD_RXD);
702
703 /* clear tx fifo */
704 timeout = SPRD_TIMEOUT;
705 while (timeout-- && serial_in(port, SPRD_STS1) & SPRD_TX_FIFO_CNT_MASK)
706 cpu_relax();
707
708 /* clear interrupt */
709 serial_out(port, SPRD_IEN, 0);
710 serial_out(port, SPRD_ICLR, ~0);
711
712 /* allocate irq */
713 sp = container_of(port, struct sprd_uart_port, port);
714 snprintf(sp->name, sizeof(sp->name), "sprd_serial%d", port->line);
715
716 sprd_uart_dma_startup(port, sp);
717
718 ret = devm_request_irq(port->dev, port->irq, sprd_handle_irq,
719 IRQF_SHARED, sp->name, port);
720 if (ret) {
721 dev_err(port->dev, "fail to request serial irq %d, ret=%d\n",
722 port->irq, ret);
723 return ret;
724 }
725 fc = serial_in(port, SPRD_CTL1);
726 fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
727 serial_out(port, SPRD_CTL1, fc);
728
729 /* enable interrupt */
730 uart_port_lock_irqsave(port, &flags);
731 ien = serial_in(port, SPRD_IEN);
732 ien |= SPRD_IEN_BREAK_DETECT | SPRD_IEN_TIMEOUT;
733 if (!sp->rx_dma.enable)
734 ien |= SPRD_IEN_RX_FULL;
735 serial_out(port, SPRD_IEN, ien);
736 uart_port_unlock_irqrestore(port, flags);
737
738 return 0;
739}
740
741static void sprd_shutdown(struct uart_port *port)
742{
743 sprd_release_dma(port);
744 serial_out(port, SPRD_IEN, 0);
745 serial_out(port, SPRD_ICLR, ~0);
746 devm_free_irq(port->dev, port->irq, port);
747}
748
749static void sprd_set_termios(struct uart_port *port, struct ktermios *termios,
750 const struct ktermios *old)
751{
752 unsigned int baud, quot;
753 unsigned int lcr = 0, fc;
754 unsigned long flags;
755
756 /* ask the core to calculate the divisor for us */
757 baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT);
758
759 quot = port->uartclk / baud;
760
761 /* set data length */
762 switch (termios->c_cflag & CSIZE) {
763 case CS5:
764 lcr |= SPRD_LCR_DATA_LEN5;
765 break;
766 case CS6:
767 lcr |= SPRD_LCR_DATA_LEN6;
768 break;
769 case CS7:
770 lcr |= SPRD_LCR_DATA_LEN7;
771 break;
772 case CS8:
773 default:
774 lcr |= SPRD_LCR_DATA_LEN8;
775 break;
776 }
777
778 /* calculate stop bits */
779 lcr &= ~(SPRD_LCR_STOP_1BIT | SPRD_LCR_STOP_2BIT);
780 if (termios->c_cflag & CSTOPB)
781 lcr |= SPRD_LCR_STOP_2BIT;
782 else
783 lcr |= SPRD_LCR_STOP_1BIT;
784
785 /* calculate parity */
786 lcr &= ~SPRD_LCR_PARITY;
787 termios->c_cflag &= ~CMSPAR; /* no support mark/space */
788 if (termios->c_cflag & PARENB) {
789 lcr |= SPRD_LCR_PARITY_EN;
790 if (termios->c_cflag & PARODD)
791 lcr |= SPRD_LCR_ODD_PAR;
792 else
793 lcr |= SPRD_LCR_EVEN_PAR;
794 }
795
796 uart_port_lock_irqsave(port, &flags);
797
798 /* update the per-port timeout */
799 uart_update_timeout(port, termios->c_cflag, baud);
800
801 port->read_status_mask = SPRD_LSR_OE;
802 if (termios->c_iflag & INPCK)
803 port->read_status_mask |= SPRD_LSR_FE | SPRD_LSR_PE;
804 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
805 port->read_status_mask |= SPRD_LSR_BI;
806
807 /* characters to ignore */
808 port->ignore_status_mask = 0;
809 if (termios->c_iflag & IGNPAR)
810 port->ignore_status_mask |= SPRD_LSR_PE | SPRD_LSR_FE;
811 if (termios->c_iflag & IGNBRK) {
812 port->ignore_status_mask |= SPRD_LSR_BI;
813 /*
814 * If we're ignoring parity and break indicators,
815 * ignore overruns too (for real raw support).
816 */
817 if (termios->c_iflag & IGNPAR)
818 port->ignore_status_mask |= SPRD_LSR_OE;
819 }
820
821 /* flow control */
822 fc = serial_in(port, SPRD_CTL1);
823 fc &= ~(RX_HW_FLOW_CTL_THLD | RX_HW_FLOW_CTL_EN | TX_HW_FLOW_CTL_EN);
824 if (termios->c_cflag & CRTSCTS) {
825 fc |= RX_HW_FLOW_CTL_THLD;
826 fc |= RX_HW_FLOW_CTL_EN;
827 fc |= TX_HW_FLOW_CTL_EN;
828 }
829
830 /* clock divider bit0~bit15 */
831 serial_out(port, SPRD_CLKD0, quot & SPRD_CLKD0_MASK);
832
833 /* clock divider bit16~bit20 */
834 serial_out(port, SPRD_CLKD1,
835 (quot & SPRD_CLKD1_MASK) >> SPRD_CLKD1_SHIFT);
836 serial_out(port, SPRD_LCR, lcr);
837 fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
838 serial_out(port, SPRD_CTL1, fc);
839
840 uart_port_unlock_irqrestore(port, flags);
841
842 /* Don't rewrite B0 */
843 if (tty_termios_baud_rate(termios))
844 tty_termios_encode_baud_rate(termios, baud, baud);
845}
846
847static const char *sprd_type(struct uart_port *port)
848{
849 return "SPX";
850}
851
852static void sprd_release_port(struct uart_port *port)
853{
854 /* nothing to do */
855}
856
857static int sprd_request_port(struct uart_port *port)
858{
859 return 0;
860}
861
862static void sprd_config_port(struct uart_port *port, int flags)
863{
864 if (flags & UART_CONFIG_TYPE)
865 port->type = PORT_SPRD;
866}
867
868static int sprd_verify_port(struct uart_port *port, struct serial_struct *ser)
869{
870 if (ser->type != PORT_SPRD)
871 return -EINVAL;
872 if (port->irq != ser->irq)
873 return -EINVAL;
874 if (port->iotype != ser->io_type)
875 return -EINVAL;
876 return 0;
877}
878
879static void sprd_pm(struct uart_port *port, unsigned int state,
880 unsigned int oldstate)
881{
882 struct sprd_uart_port *sup =
883 container_of(port, struct sprd_uart_port, port);
884
885 switch (state) {
886 case UART_PM_STATE_ON:
887 clk_prepare_enable(sup->clk);
888 break;
889 case UART_PM_STATE_OFF:
890 clk_disable_unprepare(sup->clk);
891 break;
892 }
893}
894
895#ifdef CONFIG_CONSOLE_POLL
896static int sprd_poll_init(struct uart_port *port)
897{
898 if (port->state->pm_state != UART_PM_STATE_ON) {
899 sprd_pm(port, UART_PM_STATE_ON, 0);
900 port->state->pm_state = UART_PM_STATE_ON;
901 }
902
903 return 0;
904}
905
906static int sprd_poll_get_char(struct uart_port *port)
907{
908 while (!(serial_in(port, SPRD_STS1) & SPRD_RX_FIFO_CNT_MASK))
909 cpu_relax();
910
911 return serial_in(port, SPRD_RXD);
912}
913
914static void sprd_poll_put_char(struct uart_port *port, unsigned char ch)
915{
916 while (serial_in(port, SPRD_STS1) & SPRD_TX_FIFO_CNT_MASK)
917 cpu_relax();
918
919 serial_out(port, SPRD_TXD, ch);
920}
921#endif
922
923static const struct uart_ops serial_sprd_ops = {
924 .tx_empty = sprd_tx_empty,
925 .get_mctrl = sprd_get_mctrl,
926 .set_mctrl = sprd_set_mctrl,
927 .stop_tx = sprd_stop_tx,
928 .start_tx = sprd_start_tx,
929 .stop_rx = sprd_stop_rx,
930 .break_ctl = sprd_break_ctl,
931 .startup = sprd_startup,
932 .shutdown = sprd_shutdown,
933 .set_termios = sprd_set_termios,
934 .type = sprd_type,
935 .release_port = sprd_release_port,
936 .request_port = sprd_request_port,
937 .config_port = sprd_config_port,
938 .verify_port = sprd_verify_port,
939 .pm = sprd_pm,
940#ifdef CONFIG_CONSOLE_POLL
941 .poll_init = sprd_poll_init,
942 .poll_get_char = sprd_poll_get_char,
943 .poll_put_char = sprd_poll_put_char,
944#endif
945};
946
947#ifdef CONFIG_SERIAL_SPRD_CONSOLE
948static void wait_for_xmitr(struct uart_port *port)
949{
950 unsigned int status, tmout = 10000;
951
952 /* wait up to 10ms for the character(s) to be sent */
953 do {
954 status = serial_in(port, SPRD_STS1);
955 if (--tmout == 0)
956 break;
957 udelay(1);
958 } while (status & SPRD_TX_FIFO_CNT_MASK);
959}
960
961static void sprd_console_putchar(struct uart_port *port, unsigned char ch)
962{
963 wait_for_xmitr(port);
964 serial_out(port, SPRD_TXD, ch);
965}
966
967static void sprd_console_write(struct console *co, const char *s,
968 unsigned int count)
969{
970 struct uart_port *port = &sprd_port[co->index]->port;
971 int locked = 1;
972 unsigned long flags;
973
974 if (port->sysrq)
975 locked = 0;
976 else if (oops_in_progress)
977 locked = uart_port_trylock_irqsave(port, &flags);
978 else
979 uart_port_lock_irqsave(port, &flags);
980
981 uart_console_write(port, s, count, sprd_console_putchar);
982
983 /* wait for transmitter to become empty */
984 wait_for_xmitr(port);
985
986 if (locked)
987 uart_port_unlock_irqrestore(port, flags);
988}
989
990static int sprd_console_setup(struct console *co, char *options)
991{
992 struct sprd_uart_port *sprd_uart_port;
993 int baud = 115200;
994 int bits = 8;
995 int parity = 'n';
996 int flow = 'n';
997
998 if (co->index >= UART_NR_MAX || co->index < 0)
999 co->index = 0;
1000
1001 sprd_uart_port = sprd_port[co->index];
1002 if (!sprd_uart_port || !sprd_uart_port->port.membase) {
1003 pr_info("serial port %d not yet initialized\n", co->index);
1004 return -ENODEV;
1005 }
1006
1007 if (options)
1008 uart_parse_options(options, &baud, &parity, &bits, &flow);
1009
1010 return uart_set_options(&sprd_uart_port->port, co, baud,
1011 parity, bits, flow);
1012}
1013
1014static struct uart_driver sprd_uart_driver;
1015static struct console sprd_console = {
1016 .name = SPRD_TTY_NAME,
1017 .write = sprd_console_write,
1018 .device = uart_console_device,
1019 .setup = sprd_console_setup,
1020 .flags = CON_PRINTBUFFER,
1021 .index = -1,
1022 .data = &sprd_uart_driver,
1023};
1024
1025static int __init sprd_serial_console_init(void)
1026{
1027 register_console(&sprd_console);
1028 return 0;
1029}
1030console_initcall(sprd_serial_console_init);
1031
1032#define SPRD_CONSOLE (&sprd_console)
1033
1034/* Support for earlycon */
1035static void sprd_putc(struct uart_port *port, unsigned char c)
1036{
1037 unsigned int timeout = SPRD_TIMEOUT;
1038
1039 while (timeout-- &&
1040 !(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER))
1041 cpu_relax();
1042
1043 writeb(c, port->membase + SPRD_TXD);
1044}
1045
1046static void sprd_early_write(struct console *con, const char *s, unsigned int n)
1047{
1048 struct earlycon_device *dev = con->data;
1049
1050 uart_console_write(&dev->port, s, n, sprd_putc);
1051}
1052
1053static int __init sprd_early_console_setup(struct earlycon_device *device,
1054 const char *opt)
1055{
1056 if (!device->port.membase)
1057 return -ENODEV;
1058
1059 device->con->write = sprd_early_write;
1060 return 0;
1061}
1062OF_EARLYCON_DECLARE(sprd_serial, "sprd,sc9836-uart",
1063 sprd_early_console_setup);
1064
1065#else /* !CONFIG_SERIAL_SPRD_CONSOLE */
1066#define SPRD_CONSOLE NULL
1067#endif
1068
1069static struct uart_driver sprd_uart_driver = {
1070 .owner = THIS_MODULE,
1071 .driver_name = "sprd_serial",
1072 .dev_name = SPRD_TTY_NAME,
1073 .major = 0,
1074 .minor = 0,
1075 .nr = UART_NR_MAX,
1076 .cons = SPRD_CONSOLE,
1077};
1078
1079static void sprd_remove(struct platform_device *dev)
1080{
1081 struct sprd_uart_port *sup = platform_get_drvdata(dev);
1082
1083 if (sup) {
1084 uart_remove_one_port(&sprd_uart_driver, &sup->port);
1085 sprd_port[sup->port.line] = NULL;
1086 sprd_rx_free_buf(sup);
1087 sprd_ports_num--;
1088 }
1089
1090 if (!sprd_ports_num)
1091 uart_unregister_driver(&sprd_uart_driver);
1092}
1093
1094static bool sprd_uart_is_console(struct uart_port *uport)
1095{
1096 struct console *cons = sprd_uart_driver.cons;
1097
1098 if ((cons && cons->index >= 0 && cons->index == uport->line) ||
1099 of_console_check(uport->dev->of_node, SPRD_TTY_NAME, uport->line))
1100 return true;
1101
1102 return false;
1103}
1104
1105static int sprd_clk_init(struct uart_port *uport)
1106{
1107 struct clk *clk_uart, *clk_parent;
1108 struct sprd_uart_port *u = container_of(uport, struct sprd_uart_port, port);
1109
1110 clk_uart = devm_clk_get(uport->dev, "uart");
1111 if (IS_ERR(clk_uart)) {
1112 dev_warn(uport->dev, "uart%d can't get uart clock\n",
1113 uport->line);
1114 clk_uart = NULL;
1115 }
1116
1117 clk_parent = devm_clk_get(uport->dev, "source");
1118 if (IS_ERR(clk_parent)) {
1119 dev_warn(uport->dev, "uart%d can't get source clock\n",
1120 uport->line);
1121 clk_parent = NULL;
1122 }
1123
1124 if (!clk_uart || clk_set_parent(clk_uart, clk_parent))
1125 uport->uartclk = SPRD_DEFAULT_SOURCE_CLK;
1126 else
1127 uport->uartclk = clk_get_rate(clk_uart);
1128
1129 u->clk = devm_clk_get(uport->dev, "enable");
1130 if (IS_ERR(u->clk)) {
1131 if (PTR_ERR(u->clk) == -EPROBE_DEFER)
1132 return -EPROBE_DEFER;
1133
1134 dev_warn(uport->dev, "uart%d can't get enable clock\n",
1135 uport->line);
1136
1137 /* To keep console alive even if the error occurred */
1138 if (!sprd_uart_is_console(uport))
1139 return PTR_ERR(u->clk);
1140
1141 u->clk = NULL;
1142 }
1143
1144 return 0;
1145}
1146
1147static int sprd_probe(struct platform_device *pdev)
1148{
1149 struct resource *res;
1150 struct uart_port *up;
1151 struct sprd_uart_port *sport;
1152 int irq;
1153 int index;
1154 int ret;
1155
1156 index = of_alias_get_id(pdev->dev.of_node, "serial");
1157 if (index < 0 || index >= UART_NR_MAX) {
1158 dev_err(&pdev->dev, "got a wrong serial alias id %d\n", index);
1159 return -EINVAL;
1160 }
1161
1162 sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
1163 if (!sport)
1164 return -ENOMEM;
1165
1166 up = &sport->port;
1167 up->dev = &pdev->dev;
1168 up->line = index;
1169 up->type = PORT_SPRD;
1170 up->iotype = UPIO_MEM;
1171 up->uartclk = SPRD_DEF_RATE;
1172 up->fifosize = SPRD_FIFO_SIZE;
1173 up->ops = &serial_sprd_ops;
1174 up->flags = UPF_BOOT_AUTOCONF;
1175 up->has_sysrq = IS_ENABLED(CONFIG_SERIAL_SPRD_CONSOLE);
1176
1177 ret = sprd_clk_init(up);
1178 if (ret)
1179 return ret;
1180
1181 up->membase = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
1182 if (IS_ERR(up->membase))
1183 return PTR_ERR(up->membase);
1184
1185 up->mapbase = res->start;
1186
1187 irq = platform_get_irq(pdev, 0);
1188 if (irq < 0)
1189 return irq;
1190 up->irq = irq;
1191
1192 /*
1193 * Allocate one dma buffer to prepare for receive transfer, in case
1194 * memory allocation failure at runtime.
1195 */
1196 ret = sprd_rx_alloc_buf(sport);
1197 if (ret)
1198 return ret;
1199
1200 if (!sprd_ports_num) {
1201 ret = uart_register_driver(&sprd_uart_driver);
1202 if (ret < 0) {
1203 pr_err("Failed to register SPRD-UART driver\n");
1204 goto free_rx_buf;
1205 }
1206 }
1207
1208 sprd_ports_num++;
1209 sprd_port[index] = sport;
1210
1211 ret = uart_add_one_port(&sprd_uart_driver, up);
1212 if (ret)
1213 goto clean_port;
1214
1215 platform_set_drvdata(pdev, up);
1216
1217 return 0;
1218
1219clean_port:
1220 sprd_port[index] = NULL;
1221 if (--sprd_ports_num == 0)
1222 uart_unregister_driver(&sprd_uart_driver);
1223free_rx_buf:
1224 sprd_rx_free_buf(sport);
1225 return ret;
1226}
1227
1228#ifdef CONFIG_PM_SLEEP
1229static int sprd_suspend(struct device *dev)
1230{
1231 struct sprd_uart_port *sup = dev_get_drvdata(dev);
1232
1233 uart_suspend_port(&sprd_uart_driver, &sup->port);
1234
1235 return 0;
1236}
1237
1238static int sprd_resume(struct device *dev)
1239{
1240 struct sprd_uart_port *sup = dev_get_drvdata(dev);
1241
1242 uart_resume_port(&sprd_uart_driver, &sup->port);
1243
1244 return 0;
1245}
1246#endif
1247
1248static SIMPLE_DEV_PM_OPS(sprd_pm_ops, sprd_suspend, sprd_resume);
1249
1250static const struct of_device_id serial_ids[] = {
1251 {.compatible = "sprd,sc9836-uart",},
1252 {}
1253};
1254MODULE_DEVICE_TABLE(of, serial_ids);
1255
1256static struct platform_driver sprd_platform_driver = {
1257 .probe = sprd_probe,
1258 .remove_new = sprd_remove,
1259 .driver = {
1260 .name = "sprd_serial",
1261 .of_match_table = serial_ids,
1262 .pm = &sprd_pm_ops,
1263 },
1264};
1265
1266module_platform_driver(sprd_platform_driver);
1267
1268MODULE_LICENSE("GPL v2");
1269MODULE_DESCRIPTION("Spreadtrum SoC serial driver series");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2012-2015 Spreadtrum Communications Inc.
4 */
5
6#if defined(CONFIG_SERIAL_SPRD_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
7#define SUPPORT_SYSRQ
8#endif
9
10#include <linux/clk.h>
11#include <linux/console.h>
12#include <linux/delay.h>
13#include <linux/dmaengine.h>
14#include <linux/dma-mapping.h>
15#include <linux/dma/sprd-dma.h>
16#include <linux/io.h>
17#include <linux/ioport.h>
18#include <linux/kernel.h>
19#include <linux/module.h>
20#include <linux/of.h>
21#include <linux/platform_device.h>
22#include <linux/serial_core.h>
23#include <linux/serial.h>
24#include <linux/slab.h>
25#include <linux/tty.h>
26#include <linux/tty_flip.h>
27
28/* device name */
29#define UART_NR_MAX 8
30#define SPRD_TTY_NAME "ttyS"
31#define SPRD_FIFO_SIZE 128
32#define SPRD_DEF_RATE 26000000
33#define SPRD_BAUD_IO_LIMIT 3000000
34#define SPRD_TIMEOUT 256000
35
36/* the offset of serial registers and BITs for them */
37/* data registers */
38#define SPRD_TXD 0x0000
39#define SPRD_RXD 0x0004
40
41/* line status register and its BITs */
42#define SPRD_LSR 0x0008
43#define SPRD_LSR_OE BIT(4)
44#define SPRD_LSR_FE BIT(3)
45#define SPRD_LSR_PE BIT(2)
46#define SPRD_LSR_BI BIT(7)
47#define SPRD_LSR_TX_OVER BIT(15)
48
49/* data number in TX and RX fifo */
50#define SPRD_STS1 0x000C
51#define SPRD_RX_FIFO_CNT_MASK GENMASK(7, 0)
52#define SPRD_TX_FIFO_CNT_MASK GENMASK(15, 8)
53
54/* interrupt enable register and its BITs */
55#define SPRD_IEN 0x0010
56#define SPRD_IEN_RX_FULL BIT(0)
57#define SPRD_IEN_TX_EMPTY BIT(1)
58#define SPRD_IEN_BREAK_DETECT BIT(7)
59#define SPRD_IEN_TIMEOUT BIT(13)
60
61/* interrupt clear register */
62#define SPRD_ICLR 0x0014
63#define SPRD_ICLR_TIMEOUT BIT(13)
64
65/* line control register */
66#define SPRD_LCR 0x0018
67#define SPRD_LCR_STOP_1BIT 0x10
68#define SPRD_LCR_STOP_2BIT 0x30
69#define SPRD_LCR_DATA_LEN (BIT(2) | BIT(3))
70#define SPRD_LCR_DATA_LEN5 0x0
71#define SPRD_LCR_DATA_LEN6 0x4
72#define SPRD_LCR_DATA_LEN7 0x8
73#define SPRD_LCR_DATA_LEN8 0xc
74#define SPRD_LCR_PARITY (BIT(0) | BIT(1))
75#define SPRD_LCR_PARITY_EN 0x2
76#define SPRD_LCR_EVEN_PAR 0x0
77#define SPRD_LCR_ODD_PAR 0x1
78
79/* control register 1 */
80#define SPRD_CTL1 0x001C
81#define SPRD_DMA_EN BIT(15)
82#define SPRD_LOOPBACK_EN BIT(14)
83#define RX_HW_FLOW_CTL_THLD BIT(6)
84#define RX_HW_FLOW_CTL_EN BIT(7)
85#define TX_HW_FLOW_CTL_EN BIT(8)
86#define RX_TOUT_THLD_DEF 0x3E00
87#define RX_HFC_THLD_DEF 0x40
88
89/* fifo threshold register */
90#define SPRD_CTL2 0x0020
91#define THLD_TX_EMPTY 0x40
92#define THLD_TX_EMPTY_SHIFT 8
93#define THLD_RX_FULL 0x40
94#define THLD_RX_FULL_MASK GENMASK(6, 0)
95
96/* config baud rate register */
97#define SPRD_CLKD0 0x0024
98#define SPRD_CLKD0_MASK GENMASK(15, 0)
99#define SPRD_CLKD1 0x0028
100#define SPRD_CLKD1_MASK GENMASK(20, 16)
101#define SPRD_CLKD1_SHIFT 16
102
103/* interrupt mask status register */
104#define SPRD_IMSR 0x002C
105#define SPRD_IMSR_RX_FIFO_FULL BIT(0)
106#define SPRD_IMSR_TX_FIFO_EMPTY BIT(1)
107#define SPRD_IMSR_BREAK_DETECT BIT(7)
108#define SPRD_IMSR_TIMEOUT BIT(13)
109#define SPRD_DEFAULT_SOURCE_CLK 26000000
110
111#define SPRD_RX_DMA_STEP 1
112#define SPRD_RX_FIFO_FULL 1
113#define SPRD_TX_FIFO_FULL 0x20
114#define SPRD_UART_RX_SIZE (UART_XMIT_SIZE / 4)
115
116struct sprd_uart_dma {
117 struct dma_chan *chn;
118 unsigned char *virt;
119 dma_addr_t phys_addr;
120 dma_cookie_t cookie;
121 u32 trans_len;
122 bool enable;
123};
124
125struct sprd_uart_port {
126 struct uart_port port;
127 char name[16];
128 struct clk *clk;
129 struct sprd_uart_dma tx_dma;
130 struct sprd_uart_dma rx_dma;
131 dma_addr_t pos;
132 unsigned char *rx_buf_tail;
133};
134
135static struct sprd_uart_port *sprd_port[UART_NR_MAX];
136static int sprd_ports_num;
137
138static int sprd_start_dma_rx(struct uart_port *port);
139static int sprd_tx_dma_config(struct uart_port *port);
140
141static inline unsigned int serial_in(struct uart_port *port,
142 unsigned int offset)
143{
144 return readl_relaxed(port->membase + offset);
145}
146
147static inline void serial_out(struct uart_port *port, unsigned int offset,
148 int value)
149{
150 writel_relaxed(value, port->membase + offset);
151}
152
153static unsigned int sprd_tx_empty(struct uart_port *port)
154{
155 if (serial_in(port, SPRD_STS1) & SPRD_TX_FIFO_CNT_MASK)
156 return 0;
157 else
158 return TIOCSER_TEMT;
159}
160
161static unsigned int sprd_get_mctrl(struct uart_port *port)
162{
163 return TIOCM_DSR | TIOCM_CTS;
164}
165
166static void sprd_set_mctrl(struct uart_port *port, unsigned int mctrl)
167{
168 u32 val = serial_in(port, SPRD_CTL1);
169
170 if (mctrl & TIOCM_LOOP)
171 val |= SPRD_LOOPBACK_EN;
172 else
173 val &= ~SPRD_LOOPBACK_EN;
174
175 serial_out(port, SPRD_CTL1, val);
176}
177
178static void sprd_stop_rx(struct uart_port *port)
179{
180 struct sprd_uart_port *sp =
181 container_of(port, struct sprd_uart_port, port);
182 unsigned int ien, iclr;
183
184 if (sp->rx_dma.enable)
185 dmaengine_terminate_all(sp->rx_dma.chn);
186
187 iclr = serial_in(port, SPRD_ICLR);
188 ien = serial_in(port, SPRD_IEN);
189
190 ien &= ~(SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT);
191 iclr |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT;
192
193 serial_out(port, SPRD_IEN, ien);
194 serial_out(port, SPRD_ICLR, iclr);
195}
196
197static void sprd_uart_dma_enable(struct uart_port *port, bool enable)
198{
199 u32 val = serial_in(port, SPRD_CTL1);
200
201 if (enable)
202 val |= SPRD_DMA_EN;
203 else
204 val &= ~SPRD_DMA_EN;
205
206 serial_out(port, SPRD_CTL1, val);
207}
208
209static void sprd_stop_tx_dma(struct uart_port *port)
210{
211 struct sprd_uart_port *sp =
212 container_of(port, struct sprd_uart_port, port);
213 struct circ_buf *xmit = &port->state->xmit;
214 struct dma_tx_state state;
215 u32 trans_len;
216
217 dmaengine_pause(sp->tx_dma.chn);
218
219 dmaengine_tx_status(sp->tx_dma.chn, sp->tx_dma.cookie, &state);
220 if (state.residue) {
221 trans_len = state.residue - sp->tx_dma.phys_addr;
222 xmit->tail = (xmit->tail + trans_len) & (UART_XMIT_SIZE - 1);
223 port->icount.tx += trans_len;
224 dma_unmap_single(port->dev, sp->tx_dma.phys_addr,
225 sp->tx_dma.trans_len, DMA_TO_DEVICE);
226 }
227
228 dmaengine_terminate_all(sp->tx_dma.chn);
229 sp->tx_dma.trans_len = 0;
230}
231
232static int sprd_tx_buf_remap(struct uart_port *port)
233{
234 struct sprd_uart_port *sp =
235 container_of(port, struct sprd_uart_port, port);
236 struct circ_buf *xmit = &port->state->xmit;
237
238 sp->tx_dma.trans_len =
239 CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
240
241 sp->tx_dma.phys_addr = dma_map_single(port->dev,
242 (void *)&(xmit->buf[xmit->tail]),
243 sp->tx_dma.trans_len,
244 DMA_TO_DEVICE);
245 return dma_mapping_error(port->dev, sp->tx_dma.phys_addr);
246}
247
248static void sprd_complete_tx_dma(void *data)
249{
250 struct uart_port *port = (struct uart_port *)data;
251 struct sprd_uart_port *sp =
252 container_of(port, struct sprd_uart_port, port);
253 struct circ_buf *xmit = &port->state->xmit;
254 unsigned long flags;
255
256 spin_lock_irqsave(&port->lock, flags);
257 dma_unmap_single(port->dev, sp->tx_dma.phys_addr,
258 sp->tx_dma.trans_len, DMA_TO_DEVICE);
259
260 xmit->tail = (xmit->tail + sp->tx_dma.trans_len) & (UART_XMIT_SIZE - 1);
261 port->icount.tx += sp->tx_dma.trans_len;
262
263 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
264 uart_write_wakeup(port);
265
266 if (uart_circ_empty(xmit) || sprd_tx_buf_remap(port) ||
267 sprd_tx_dma_config(port))
268 sp->tx_dma.trans_len = 0;
269
270 spin_unlock_irqrestore(&port->lock, flags);
271}
272
273static int sprd_uart_dma_submit(struct uart_port *port,
274 struct sprd_uart_dma *ud, u32 trans_len,
275 enum dma_transfer_direction direction,
276 dma_async_tx_callback callback)
277{
278 struct dma_async_tx_descriptor *dma_des;
279 unsigned long flags;
280
281 flags = SPRD_DMA_FLAGS(SPRD_DMA_CHN_MODE_NONE,
282 SPRD_DMA_NO_TRG,
283 SPRD_DMA_FRAG_REQ,
284 SPRD_DMA_TRANS_INT);
285
286 dma_des = dmaengine_prep_slave_single(ud->chn, ud->phys_addr, trans_len,
287 direction, flags);
288 if (!dma_des)
289 return -ENODEV;
290
291 dma_des->callback = callback;
292 dma_des->callback_param = port;
293
294 ud->cookie = dmaengine_submit(dma_des);
295 if (dma_submit_error(ud->cookie))
296 return dma_submit_error(ud->cookie);
297
298 dma_async_issue_pending(ud->chn);
299
300 return 0;
301}
302
303static int sprd_tx_dma_config(struct uart_port *port)
304{
305 struct sprd_uart_port *sp =
306 container_of(port, struct sprd_uart_port, port);
307 u32 burst = sp->tx_dma.trans_len > SPRD_TX_FIFO_FULL ?
308 SPRD_TX_FIFO_FULL : sp->tx_dma.trans_len;
309 int ret;
310 struct dma_slave_config cfg = {
311 .dst_addr = port->mapbase + SPRD_TXD,
312 .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
313 .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
314 .src_maxburst = burst,
315 };
316
317 ret = dmaengine_slave_config(sp->tx_dma.chn, &cfg);
318 if (ret < 0)
319 return ret;
320
321 return sprd_uart_dma_submit(port, &sp->tx_dma, sp->tx_dma.trans_len,
322 DMA_MEM_TO_DEV, sprd_complete_tx_dma);
323}
324
325static void sprd_start_tx_dma(struct uart_port *port)
326{
327 struct sprd_uart_port *sp =
328 container_of(port, struct sprd_uart_port, port);
329 struct circ_buf *xmit = &port->state->xmit;
330
331 if (port->x_char) {
332 serial_out(port, SPRD_TXD, port->x_char);
333 port->icount.tx++;
334 port->x_char = 0;
335 return;
336 }
337
338 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
339 sprd_stop_tx_dma(port);
340 return;
341 }
342
343 if (sp->tx_dma.trans_len)
344 return;
345
346 if (sprd_tx_buf_remap(port) || sprd_tx_dma_config(port))
347 sp->tx_dma.trans_len = 0;
348}
349
350static void sprd_rx_full_thld(struct uart_port *port, u32 thld)
351{
352 u32 val = serial_in(port, SPRD_CTL2);
353
354 val &= ~THLD_RX_FULL_MASK;
355 val |= thld & THLD_RX_FULL_MASK;
356 serial_out(port, SPRD_CTL2, val);
357}
358
359static int sprd_rx_alloc_buf(struct sprd_uart_port *sp)
360{
361 sp->rx_dma.virt = dma_alloc_coherent(sp->port.dev, SPRD_UART_RX_SIZE,
362 &sp->rx_dma.phys_addr, GFP_KERNEL);
363 if (!sp->rx_dma.virt)
364 return -ENOMEM;
365
366 return 0;
367}
368
369static void sprd_rx_free_buf(struct sprd_uart_port *sp)
370{
371 if (sp->rx_dma.virt)
372 dma_free_coherent(sp->port.dev, SPRD_UART_RX_SIZE,
373 sp->rx_dma.virt, sp->rx_dma.phys_addr);
374
375}
376
377static int sprd_rx_dma_config(struct uart_port *port, u32 burst)
378{
379 struct sprd_uart_port *sp =
380 container_of(port, struct sprd_uart_port, port);
381 struct dma_slave_config cfg = {
382 .src_addr = port->mapbase + SPRD_RXD,
383 .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
384 .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
385 .src_maxburst = burst,
386 };
387
388 return dmaengine_slave_config(sp->rx_dma.chn, &cfg);
389}
390
391static void sprd_uart_dma_rx(struct uart_port *port)
392{
393 struct sprd_uart_port *sp =
394 container_of(port, struct sprd_uart_port, port);
395 struct tty_port *tty = &port->state->port;
396
397 port->icount.rx += sp->rx_dma.trans_len;
398 tty_insert_flip_string(tty, sp->rx_buf_tail, sp->rx_dma.trans_len);
399 tty_flip_buffer_push(tty);
400}
401
402static void sprd_uart_dma_irq(struct uart_port *port)
403{
404 struct sprd_uart_port *sp =
405 container_of(port, struct sprd_uart_port, port);
406 struct dma_tx_state state;
407 enum dma_status status;
408
409 status = dmaengine_tx_status(sp->rx_dma.chn,
410 sp->rx_dma.cookie, &state);
411 if (status == DMA_ERROR)
412 sprd_stop_rx(port);
413
414 if (!state.residue && sp->pos == sp->rx_dma.phys_addr)
415 return;
416
417 if (!state.residue) {
418 sp->rx_dma.trans_len = SPRD_UART_RX_SIZE +
419 sp->rx_dma.phys_addr - sp->pos;
420 sp->pos = sp->rx_dma.phys_addr;
421 } else {
422 sp->rx_dma.trans_len = state.residue - sp->pos;
423 sp->pos = state.residue;
424 }
425
426 sprd_uart_dma_rx(port);
427 sp->rx_buf_tail += sp->rx_dma.trans_len;
428}
429
430static void sprd_complete_rx_dma(void *data)
431{
432 struct uart_port *port = (struct uart_port *)data;
433 struct sprd_uart_port *sp =
434 container_of(port, struct sprd_uart_port, port);
435 struct dma_tx_state state;
436 enum dma_status status;
437 unsigned long flags;
438
439 spin_lock_irqsave(&port->lock, flags);
440
441 status = dmaengine_tx_status(sp->rx_dma.chn,
442 sp->rx_dma.cookie, &state);
443 if (status != DMA_COMPLETE) {
444 sprd_stop_rx(port);
445 spin_unlock_irqrestore(&port->lock, flags);
446 return;
447 }
448
449 if (sp->pos != sp->rx_dma.phys_addr) {
450 sp->rx_dma.trans_len = SPRD_UART_RX_SIZE +
451 sp->rx_dma.phys_addr - sp->pos;
452 sprd_uart_dma_rx(port);
453 sp->rx_buf_tail += sp->rx_dma.trans_len;
454 }
455
456 if (sprd_start_dma_rx(port))
457 sprd_stop_rx(port);
458
459 spin_unlock_irqrestore(&port->lock, flags);
460}
461
462static int sprd_start_dma_rx(struct uart_port *port)
463{
464 struct sprd_uart_port *sp =
465 container_of(port, struct sprd_uart_port, port);
466 int ret;
467
468 if (!sp->rx_dma.enable)
469 return 0;
470
471 sp->pos = sp->rx_dma.phys_addr;
472 sp->rx_buf_tail = sp->rx_dma.virt;
473 sprd_rx_full_thld(port, SPRD_RX_FIFO_FULL);
474 ret = sprd_rx_dma_config(port, SPRD_RX_DMA_STEP);
475 if (ret)
476 return ret;
477
478 return sprd_uart_dma_submit(port, &sp->rx_dma, SPRD_UART_RX_SIZE,
479 DMA_DEV_TO_MEM, sprd_complete_rx_dma);
480}
481
482static void sprd_release_dma(struct uart_port *port)
483{
484 struct sprd_uart_port *sp =
485 container_of(port, struct sprd_uart_port, port);
486
487 sprd_uart_dma_enable(port, false);
488
489 if (sp->rx_dma.enable)
490 dma_release_channel(sp->rx_dma.chn);
491
492 if (sp->tx_dma.enable)
493 dma_release_channel(sp->tx_dma.chn);
494
495 sp->tx_dma.enable = false;
496 sp->rx_dma.enable = false;
497}
498
499static void sprd_request_dma(struct uart_port *port)
500{
501 struct sprd_uart_port *sp =
502 container_of(port, struct sprd_uart_port, port);
503
504 sp->tx_dma.enable = true;
505 sp->rx_dma.enable = true;
506
507 sp->tx_dma.chn = dma_request_chan(port->dev, "tx");
508 if (IS_ERR(sp->tx_dma.chn)) {
509 dev_err(port->dev, "request TX DMA channel failed, ret = %ld\n",
510 PTR_ERR(sp->tx_dma.chn));
511 sp->tx_dma.enable = false;
512 }
513
514 sp->rx_dma.chn = dma_request_chan(port->dev, "rx");
515 if (IS_ERR(sp->rx_dma.chn)) {
516 dev_err(port->dev, "request RX DMA channel failed, ret = %ld\n",
517 PTR_ERR(sp->rx_dma.chn));
518 sp->rx_dma.enable = false;
519 }
520}
521
522static void sprd_stop_tx(struct uart_port *port)
523{
524 struct sprd_uart_port *sp = container_of(port, struct sprd_uart_port,
525 port);
526 unsigned int ien, iclr;
527
528 if (sp->tx_dma.enable) {
529 sprd_stop_tx_dma(port);
530 return;
531 }
532
533 iclr = serial_in(port, SPRD_ICLR);
534 ien = serial_in(port, SPRD_IEN);
535
536 iclr |= SPRD_IEN_TX_EMPTY;
537 ien &= ~SPRD_IEN_TX_EMPTY;
538
539 serial_out(port, SPRD_IEN, ien);
540 serial_out(port, SPRD_ICLR, iclr);
541}
542
543static void sprd_start_tx(struct uart_port *port)
544{
545 struct sprd_uart_port *sp = container_of(port, struct sprd_uart_port,
546 port);
547 unsigned int ien;
548
549 if (sp->tx_dma.enable) {
550 sprd_start_tx_dma(port);
551 return;
552 }
553
554 ien = serial_in(port, SPRD_IEN);
555 if (!(ien & SPRD_IEN_TX_EMPTY)) {
556 ien |= SPRD_IEN_TX_EMPTY;
557 serial_out(port, SPRD_IEN, ien);
558 }
559}
560
561/* The Sprd serial does not support this function. */
562static void sprd_break_ctl(struct uart_port *port, int break_state)
563{
564 /* nothing to do */
565}
566
567static int handle_lsr_errors(struct uart_port *port,
568 unsigned int *flag,
569 unsigned int *lsr)
570{
571 int ret = 0;
572
573 /* statistics */
574 if (*lsr & SPRD_LSR_BI) {
575 *lsr &= ~(SPRD_LSR_FE | SPRD_LSR_PE);
576 port->icount.brk++;
577 ret = uart_handle_break(port);
578 if (ret)
579 return ret;
580 } else if (*lsr & SPRD_LSR_PE)
581 port->icount.parity++;
582 else if (*lsr & SPRD_LSR_FE)
583 port->icount.frame++;
584 if (*lsr & SPRD_LSR_OE)
585 port->icount.overrun++;
586
587 /* mask off conditions which should be ignored */
588 *lsr &= port->read_status_mask;
589 if (*lsr & SPRD_LSR_BI)
590 *flag = TTY_BREAK;
591 else if (*lsr & SPRD_LSR_PE)
592 *flag = TTY_PARITY;
593 else if (*lsr & SPRD_LSR_FE)
594 *flag = TTY_FRAME;
595
596 return ret;
597}
598
599static inline void sprd_rx(struct uart_port *port)
600{
601 struct sprd_uart_port *sp = container_of(port, struct sprd_uart_port,
602 port);
603 struct tty_port *tty = &port->state->port;
604 unsigned int ch, flag, lsr, max_count = SPRD_TIMEOUT;
605
606 if (sp->rx_dma.enable) {
607 sprd_uart_dma_irq(port);
608 return;
609 }
610
611 while ((serial_in(port, SPRD_STS1) & SPRD_RX_FIFO_CNT_MASK) &&
612 max_count--) {
613 lsr = serial_in(port, SPRD_LSR);
614 ch = serial_in(port, SPRD_RXD);
615 flag = TTY_NORMAL;
616 port->icount.rx++;
617
618 if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE |
619 SPRD_LSR_FE | SPRD_LSR_OE))
620 if (handle_lsr_errors(port, &flag, &lsr))
621 continue;
622 if (uart_handle_sysrq_char(port, ch))
623 continue;
624
625 uart_insert_char(port, lsr, SPRD_LSR_OE, ch, flag);
626 }
627
628 tty_flip_buffer_push(tty);
629}
630
631static inline void sprd_tx(struct uart_port *port)
632{
633 struct circ_buf *xmit = &port->state->xmit;
634 int count;
635
636 if (port->x_char) {
637 serial_out(port, SPRD_TXD, port->x_char);
638 port->icount.tx++;
639 port->x_char = 0;
640 return;
641 }
642
643 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
644 sprd_stop_tx(port);
645 return;
646 }
647
648 count = THLD_TX_EMPTY;
649 do {
650 serial_out(port, SPRD_TXD, xmit->buf[xmit->tail]);
651 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
652 port->icount.tx++;
653 if (uart_circ_empty(xmit))
654 break;
655 } while (--count > 0);
656
657 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
658 uart_write_wakeup(port);
659
660 if (uart_circ_empty(xmit))
661 sprd_stop_tx(port);
662}
663
664/* this handles the interrupt from one port */
665static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
666{
667 struct uart_port *port = dev_id;
668 unsigned int ims;
669
670 spin_lock(&port->lock);
671
672 ims = serial_in(port, SPRD_IMSR);
673
674 if (!ims) {
675 spin_unlock(&port->lock);
676 return IRQ_NONE;
677 }
678
679 if (ims & SPRD_IMSR_TIMEOUT)
680 serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT);
681
682 if (ims & (SPRD_IMSR_RX_FIFO_FULL | SPRD_IMSR_BREAK_DETECT |
683 SPRD_IMSR_TIMEOUT))
684 sprd_rx(port);
685
686 if (ims & SPRD_IMSR_TX_FIFO_EMPTY)
687 sprd_tx(port);
688
689 spin_unlock(&port->lock);
690
691 return IRQ_HANDLED;
692}
693
694static void sprd_uart_dma_startup(struct uart_port *port,
695 struct sprd_uart_port *sp)
696{
697 int ret;
698
699 sprd_request_dma(port);
700 if (!(sp->rx_dma.enable || sp->tx_dma.enable))
701 return;
702
703 ret = sprd_start_dma_rx(port);
704 if (ret) {
705 sp->rx_dma.enable = false;
706 dma_release_channel(sp->rx_dma.chn);
707 dev_warn(port->dev, "fail to start RX dma mode\n");
708 }
709
710 sprd_uart_dma_enable(port, true);
711}
712
713static int sprd_startup(struct uart_port *port)
714{
715 int ret = 0;
716 unsigned int ien, fc;
717 unsigned int timeout;
718 struct sprd_uart_port *sp;
719 unsigned long flags;
720
721 serial_out(port, SPRD_CTL2,
722 THLD_TX_EMPTY << THLD_TX_EMPTY_SHIFT | THLD_RX_FULL);
723
724 /* clear rx fifo */
725 timeout = SPRD_TIMEOUT;
726 while (timeout-- && serial_in(port, SPRD_STS1) & SPRD_RX_FIFO_CNT_MASK)
727 serial_in(port, SPRD_RXD);
728
729 /* clear tx fifo */
730 timeout = SPRD_TIMEOUT;
731 while (timeout-- && serial_in(port, SPRD_STS1) & SPRD_TX_FIFO_CNT_MASK)
732 cpu_relax();
733
734 /* clear interrupt */
735 serial_out(port, SPRD_IEN, 0);
736 serial_out(port, SPRD_ICLR, ~0);
737
738 /* allocate irq */
739 sp = container_of(port, struct sprd_uart_port, port);
740 snprintf(sp->name, sizeof(sp->name), "sprd_serial%d", port->line);
741
742 sprd_uart_dma_startup(port, sp);
743
744 ret = devm_request_irq(port->dev, port->irq, sprd_handle_irq,
745 IRQF_SHARED, sp->name, port);
746 if (ret) {
747 dev_err(port->dev, "fail to request serial irq %d, ret=%d\n",
748 port->irq, ret);
749 return ret;
750 }
751 fc = serial_in(port, SPRD_CTL1);
752 fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
753 serial_out(port, SPRD_CTL1, fc);
754
755 /* enable interrupt */
756 spin_lock_irqsave(&port->lock, flags);
757 ien = serial_in(port, SPRD_IEN);
758 ien |= SPRD_IEN_BREAK_DETECT | SPRD_IEN_TIMEOUT;
759 if (!sp->rx_dma.enable)
760 ien |= SPRD_IEN_RX_FULL;
761 serial_out(port, SPRD_IEN, ien);
762 spin_unlock_irqrestore(&port->lock, flags);
763
764 return 0;
765}
766
767static void sprd_shutdown(struct uart_port *port)
768{
769 sprd_release_dma(port);
770 serial_out(port, SPRD_IEN, 0);
771 serial_out(port, SPRD_ICLR, ~0);
772 devm_free_irq(port->dev, port->irq, port);
773}
774
775static void sprd_set_termios(struct uart_port *port,
776 struct ktermios *termios,
777 struct ktermios *old)
778{
779 unsigned int baud, quot;
780 unsigned int lcr = 0, fc;
781 unsigned long flags;
782
783 /* ask the core to calculate the divisor for us */
784 baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT);
785
786 quot = port->uartclk / baud;
787
788 /* set data length */
789 switch (termios->c_cflag & CSIZE) {
790 case CS5:
791 lcr |= SPRD_LCR_DATA_LEN5;
792 break;
793 case CS6:
794 lcr |= SPRD_LCR_DATA_LEN6;
795 break;
796 case CS7:
797 lcr |= SPRD_LCR_DATA_LEN7;
798 break;
799 case CS8:
800 default:
801 lcr |= SPRD_LCR_DATA_LEN8;
802 break;
803 }
804
805 /* calculate stop bits */
806 lcr &= ~(SPRD_LCR_STOP_1BIT | SPRD_LCR_STOP_2BIT);
807 if (termios->c_cflag & CSTOPB)
808 lcr |= SPRD_LCR_STOP_2BIT;
809 else
810 lcr |= SPRD_LCR_STOP_1BIT;
811
812 /* calculate parity */
813 lcr &= ~SPRD_LCR_PARITY;
814 termios->c_cflag &= ~CMSPAR; /* no support mark/space */
815 if (termios->c_cflag & PARENB) {
816 lcr |= SPRD_LCR_PARITY_EN;
817 if (termios->c_cflag & PARODD)
818 lcr |= SPRD_LCR_ODD_PAR;
819 else
820 lcr |= SPRD_LCR_EVEN_PAR;
821 }
822
823 spin_lock_irqsave(&port->lock, flags);
824
825 /* update the per-port timeout */
826 uart_update_timeout(port, termios->c_cflag, baud);
827
828 port->read_status_mask = SPRD_LSR_OE;
829 if (termios->c_iflag & INPCK)
830 port->read_status_mask |= SPRD_LSR_FE | SPRD_LSR_PE;
831 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
832 port->read_status_mask |= SPRD_LSR_BI;
833
834 /* characters to ignore */
835 port->ignore_status_mask = 0;
836 if (termios->c_iflag & IGNPAR)
837 port->ignore_status_mask |= SPRD_LSR_PE | SPRD_LSR_FE;
838 if (termios->c_iflag & IGNBRK) {
839 port->ignore_status_mask |= SPRD_LSR_BI;
840 /*
841 * If we're ignoring parity and break indicators,
842 * ignore overruns too (for real raw support).
843 */
844 if (termios->c_iflag & IGNPAR)
845 port->ignore_status_mask |= SPRD_LSR_OE;
846 }
847
848 /* flow control */
849 fc = serial_in(port, SPRD_CTL1);
850 fc &= ~(RX_HW_FLOW_CTL_THLD | RX_HW_FLOW_CTL_EN | TX_HW_FLOW_CTL_EN);
851 if (termios->c_cflag & CRTSCTS) {
852 fc |= RX_HW_FLOW_CTL_THLD;
853 fc |= RX_HW_FLOW_CTL_EN;
854 fc |= TX_HW_FLOW_CTL_EN;
855 }
856
857 /* clock divider bit0~bit15 */
858 serial_out(port, SPRD_CLKD0, quot & SPRD_CLKD0_MASK);
859
860 /* clock divider bit16~bit20 */
861 serial_out(port, SPRD_CLKD1,
862 (quot & SPRD_CLKD1_MASK) >> SPRD_CLKD1_SHIFT);
863 serial_out(port, SPRD_LCR, lcr);
864 fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
865 serial_out(port, SPRD_CTL1, fc);
866
867 spin_unlock_irqrestore(&port->lock, flags);
868
869 /* Don't rewrite B0 */
870 if (tty_termios_baud_rate(termios))
871 tty_termios_encode_baud_rate(termios, baud, baud);
872}
873
874static const char *sprd_type(struct uart_port *port)
875{
876 return "SPX";
877}
878
879static void sprd_release_port(struct uart_port *port)
880{
881 /* nothing to do */
882}
883
884static int sprd_request_port(struct uart_port *port)
885{
886 return 0;
887}
888
889static void sprd_config_port(struct uart_port *port, int flags)
890{
891 if (flags & UART_CONFIG_TYPE)
892 port->type = PORT_SPRD;
893}
894
895static int sprd_verify_port(struct uart_port *port, struct serial_struct *ser)
896{
897 if (ser->type != PORT_SPRD)
898 return -EINVAL;
899 if (port->irq != ser->irq)
900 return -EINVAL;
901 if (port->iotype != ser->io_type)
902 return -EINVAL;
903 return 0;
904}
905
906static void sprd_pm(struct uart_port *port, unsigned int state,
907 unsigned int oldstate)
908{
909 struct sprd_uart_port *sup =
910 container_of(port, struct sprd_uart_port, port);
911
912 switch (state) {
913 case UART_PM_STATE_ON:
914 clk_prepare_enable(sup->clk);
915 break;
916 case UART_PM_STATE_OFF:
917 clk_disable_unprepare(sup->clk);
918 break;
919 }
920}
921
922static const struct uart_ops serial_sprd_ops = {
923 .tx_empty = sprd_tx_empty,
924 .get_mctrl = sprd_get_mctrl,
925 .set_mctrl = sprd_set_mctrl,
926 .stop_tx = sprd_stop_tx,
927 .start_tx = sprd_start_tx,
928 .stop_rx = sprd_stop_rx,
929 .break_ctl = sprd_break_ctl,
930 .startup = sprd_startup,
931 .shutdown = sprd_shutdown,
932 .set_termios = sprd_set_termios,
933 .type = sprd_type,
934 .release_port = sprd_release_port,
935 .request_port = sprd_request_port,
936 .config_port = sprd_config_port,
937 .verify_port = sprd_verify_port,
938 .pm = sprd_pm,
939};
940
941#ifdef CONFIG_SERIAL_SPRD_CONSOLE
942static void wait_for_xmitr(struct uart_port *port)
943{
944 unsigned int status, tmout = 10000;
945
946 /* wait up to 10ms for the character(s) to be sent */
947 do {
948 status = serial_in(port, SPRD_STS1);
949 if (--tmout == 0)
950 break;
951 udelay(1);
952 } while (status & SPRD_TX_FIFO_CNT_MASK);
953}
954
955static void sprd_console_putchar(struct uart_port *port, int ch)
956{
957 wait_for_xmitr(port);
958 serial_out(port, SPRD_TXD, ch);
959}
960
961static void sprd_console_write(struct console *co, const char *s,
962 unsigned int count)
963{
964 struct uart_port *port = &sprd_port[co->index]->port;
965 int locked = 1;
966 unsigned long flags;
967
968 if (port->sysrq)
969 locked = 0;
970 else if (oops_in_progress)
971 locked = spin_trylock_irqsave(&port->lock, flags);
972 else
973 spin_lock_irqsave(&port->lock, flags);
974
975 uart_console_write(port, s, count, sprd_console_putchar);
976
977 /* wait for transmitter to become empty */
978 wait_for_xmitr(port);
979
980 if (locked)
981 spin_unlock_irqrestore(&port->lock, flags);
982}
983
984static int __init sprd_console_setup(struct console *co, char *options)
985{
986 struct sprd_uart_port *sprd_uart_port;
987 int baud = 115200;
988 int bits = 8;
989 int parity = 'n';
990 int flow = 'n';
991
992 if (co->index >= UART_NR_MAX || co->index < 0)
993 co->index = 0;
994
995 sprd_uart_port = sprd_port[co->index];
996 if (!sprd_uart_port || !sprd_uart_port->port.membase) {
997 pr_info("serial port %d not yet initialized\n", co->index);
998 return -ENODEV;
999 }
1000
1001 if (options)
1002 uart_parse_options(options, &baud, &parity, &bits, &flow);
1003
1004 return uart_set_options(&sprd_uart_port->port, co, baud,
1005 parity, bits, flow);
1006}
1007
1008static struct uart_driver sprd_uart_driver;
1009static struct console sprd_console = {
1010 .name = SPRD_TTY_NAME,
1011 .write = sprd_console_write,
1012 .device = uart_console_device,
1013 .setup = sprd_console_setup,
1014 .flags = CON_PRINTBUFFER,
1015 .index = -1,
1016 .data = &sprd_uart_driver,
1017};
1018
1019static int __init sprd_serial_console_init(void)
1020{
1021 register_console(&sprd_console);
1022 return 0;
1023}
1024console_initcall(sprd_serial_console_init);
1025
1026#define SPRD_CONSOLE (&sprd_console)
1027
1028/* Support for earlycon */
1029static void sprd_putc(struct uart_port *port, int c)
1030{
1031 unsigned int timeout = SPRD_TIMEOUT;
1032
1033 while (timeout-- &&
1034 !(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER))
1035 cpu_relax();
1036
1037 writeb(c, port->membase + SPRD_TXD);
1038}
1039
1040static void sprd_early_write(struct console *con, const char *s, unsigned int n)
1041{
1042 struct earlycon_device *dev = con->data;
1043
1044 uart_console_write(&dev->port, s, n, sprd_putc);
1045}
1046
1047static int __init sprd_early_console_setup(struct earlycon_device *device,
1048 const char *opt)
1049{
1050 if (!device->port.membase)
1051 return -ENODEV;
1052
1053 device->con->write = sprd_early_write;
1054 return 0;
1055}
1056OF_EARLYCON_DECLARE(sprd_serial, "sprd,sc9836-uart",
1057 sprd_early_console_setup);
1058
1059#else /* !CONFIG_SERIAL_SPRD_CONSOLE */
1060#define SPRD_CONSOLE NULL
1061#endif
1062
1063static struct uart_driver sprd_uart_driver = {
1064 .owner = THIS_MODULE,
1065 .driver_name = "sprd_serial",
1066 .dev_name = SPRD_TTY_NAME,
1067 .major = 0,
1068 .minor = 0,
1069 .nr = UART_NR_MAX,
1070 .cons = SPRD_CONSOLE,
1071};
1072
1073static int sprd_probe_dt_alias(int index, struct device *dev)
1074{
1075 struct device_node *np;
1076 int ret = index;
1077
1078 if (!IS_ENABLED(CONFIG_OF))
1079 return ret;
1080
1081 np = dev->of_node;
1082 if (!np)
1083 return ret;
1084
1085 ret = of_alias_get_id(np, "serial");
1086 if (ret < 0)
1087 ret = index;
1088 else if (ret >= ARRAY_SIZE(sprd_port) || sprd_port[ret] != NULL) {
1089 dev_warn(dev, "requested serial port %d not available.\n", ret);
1090 ret = index;
1091 }
1092
1093 return ret;
1094}
1095
1096static int sprd_remove(struct platform_device *dev)
1097{
1098 struct sprd_uart_port *sup = platform_get_drvdata(dev);
1099
1100 if (sup) {
1101 uart_remove_one_port(&sprd_uart_driver, &sup->port);
1102 sprd_port[sup->port.line] = NULL;
1103 sprd_ports_num--;
1104 }
1105
1106 if (!sprd_ports_num)
1107 uart_unregister_driver(&sprd_uart_driver);
1108
1109 sprd_rx_free_buf(sup);
1110
1111 return 0;
1112}
1113
1114static bool sprd_uart_is_console(struct uart_port *uport)
1115{
1116 struct console *cons = sprd_uart_driver.cons;
1117
1118 if (cons && cons->index >= 0 && cons->index == uport->line)
1119 return true;
1120
1121 return false;
1122}
1123
1124static int sprd_clk_init(struct uart_port *uport)
1125{
1126 struct clk *clk_uart, *clk_parent;
1127 struct sprd_uart_port *u = sprd_port[uport->line];
1128
1129 clk_uart = devm_clk_get(uport->dev, "uart");
1130 if (IS_ERR(clk_uart)) {
1131 dev_warn(uport->dev, "uart%d can't get uart clock\n",
1132 uport->line);
1133 clk_uart = NULL;
1134 }
1135
1136 clk_parent = devm_clk_get(uport->dev, "source");
1137 if (IS_ERR(clk_parent)) {
1138 dev_warn(uport->dev, "uart%d can't get source clock\n",
1139 uport->line);
1140 clk_parent = NULL;
1141 }
1142
1143 if (!clk_uart || clk_set_parent(clk_uart, clk_parent))
1144 uport->uartclk = SPRD_DEFAULT_SOURCE_CLK;
1145 else
1146 uport->uartclk = clk_get_rate(clk_uart);
1147
1148 u->clk = devm_clk_get(uport->dev, "enable");
1149 if (IS_ERR(u->clk)) {
1150 if (PTR_ERR(u->clk) == -EPROBE_DEFER)
1151 return -EPROBE_DEFER;
1152
1153 dev_warn(uport->dev, "uart%d can't get enable clock\n",
1154 uport->line);
1155
1156 /* To keep console alive even if the error occurred */
1157 if (!sprd_uart_is_console(uport))
1158 return PTR_ERR(u->clk);
1159
1160 u->clk = NULL;
1161 }
1162
1163 return 0;
1164}
1165
1166static int sprd_probe(struct platform_device *pdev)
1167{
1168 struct resource *res;
1169 struct uart_port *up;
1170 int irq;
1171 int index;
1172 int ret;
1173
1174 for (index = 0; index < ARRAY_SIZE(sprd_port); index++)
1175 if (sprd_port[index] == NULL)
1176 break;
1177
1178 if (index == ARRAY_SIZE(sprd_port))
1179 return -EBUSY;
1180
1181 index = sprd_probe_dt_alias(index, &pdev->dev);
1182
1183 sprd_port[index] = devm_kzalloc(&pdev->dev, sizeof(*sprd_port[index]),
1184 GFP_KERNEL);
1185 if (!sprd_port[index])
1186 return -ENOMEM;
1187
1188 up = &sprd_port[index]->port;
1189 up->dev = &pdev->dev;
1190 up->line = index;
1191 up->type = PORT_SPRD;
1192 up->iotype = UPIO_MEM;
1193 up->uartclk = SPRD_DEF_RATE;
1194 up->fifosize = SPRD_FIFO_SIZE;
1195 up->ops = &serial_sprd_ops;
1196 up->flags = UPF_BOOT_AUTOCONF;
1197
1198 ret = sprd_clk_init(up);
1199 if (ret)
1200 return ret;
1201
1202 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1203 up->membase = devm_ioremap_resource(&pdev->dev, res);
1204 if (IS_ERR(up->membase))
1205 return PTR_ERR(up->membase);
1206
1207 up->mapbase = res->start;
1208
1209 irq = platform_get_irq(pdev, 0);
1210 if (irq < 0)
1211 return irq;
1212 up->irq = irq;
1213
1214 /*
1215 * Allocate one dma buffer to prepare for receive transfer, in case
1216 * memory allocation failure at runtime.
1217 */
1218 ret = sprd_rx_alloc_buf(sprd_port[index]);
1219 if (ret)
1220 return ret;
1221
1222 if (!sprd_ports_num) {
1223 ret = uart_register_driver(&sprd_uart_driver);
1224 if (ret < 0) {
1225 pr_err("Failed to register SPRD-UART driver\n");
1226 return ret;
1227 }
1228 }
1229 sprd_ports_num++;
1230
1231 ret = uart_add_one_port(&sprd_uart_driver, up);
1232 if (ret) {
1233 sprd_port[index] = NULL;
1234 sprd_remove(pdev);
1235 }
1236
1237 platform_set_drvdata(pdev, up);
1238
1239 return ret;
1240}
1241
1242#ifdef CONFIG_PM_SLEEP
1243static int sprd_suspend(struct device *dev)
1244{
1245 struct sprd_uart_port *sup = dev_get_drvdata(dev);
1246
1247 uart_suspend_port(&sprd_uart_driver, &sup->port);
1248
1249 return 0;
1250}
1251
1252static int sprd_resume(struct device *dev)
1253{
1254 struct sprd_uart_port *sup = dev_get_drvdata(dev);
1255
1256 uart_resume_port(&sprd_uart_driver, &sup->port);
1257
1258 return 0;
1259}
1260#endif
1261
1262static SIMPLE_DEV_PM_OPS(sprd_pm_ops, sprd_suspend, sprd_resume);
1263
1264static const struct of_device_id serial_ids[] = {
1265 {.compatible = "sprd,sc9836-uart",},
1266 {}
1267};
1268MODULE_DEVICE_TABLE(of, serial_ids);
1269
1270static struct platform_driver sprd_platform_driver = {
1271 .probe = sprd_probe,
1272 .remove = sprd_remove,
1273 .driver = {
1274 .name = "sprd_serial",
1275 .of_match_table = of_match_ptr(serial_ids),
1276 .pm = &sprd_pm_ops,
1277 },
1278};
1279
1280module_platform_driver(sprd_platform_driver);
1281
1282MODULE_LICENSE("GPL v2");
1283MODULE_DESCRIPTION("Spreadtrum SoC serial driver series");