Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/******************************************************************************
3* QLOGIC LINUX SOFTWARE
4*
5* QLogic QLA1280 (Ultra2) and QLA12160 (Ultra3) SCSI driver
6* Copyright (C) 2000 Qlogic Corporation (www.qlogic.com)
7* Copyright (C) 2001-2004 Jes Sorensen, Wild Open Source Inc.
8* Copyright (C) 2003-2004 Christoph Hellwig
9*
10******************************************************************************/
11#define QLA1280_VERSION "3.27.1"
12/*****************************************************************************
13 Revision History:
14 Rev 3.27.1, February 8, 2010, Michael Reed
15 - Retain firmware image for error recovery.
16 Rev 3.27, February 10, 2009, Michael Reed
17 - General code cleanup.
18 - Improve error recovery.
19 Rev 3.26, January 16, 2006 Jes Sorensen
20 - Ditch all < 2.6 support
21 Rev 3.25.1, February 10, 2005 Christoph Hellwig
22 - use pci_map_single to map non-S/G requests
23 - remove qla1280_proc_info
24 Rev 3.25, September 28, 2004, Christoph Hellwig
25 - add support for ISP1020/1040
26 - don't include "scsi.h" anymore for 2.6.x
27 Rev 3.24.4 June 7, 2004 Christoph Hellwig
28 - restructure firmware loading, cleanup initialization code
29 - prepare support for ISP1020/1040 chips
30 Rev 3.24.3 January 19, 2004, Jes Sorensen
31 - Handle PCI DMA mask settings correctly
32 - Correct order of error handling in probe_one, free_irq should not
33 be called if request_irq failed
34 Rev 3.24.2 January 19, 2004, James Bottomley & Andrew Vasquez
35 - Big endian fixes (James)
36 - Remove bogus IOCB content on zero data transfer commands (Andrew)
37 Rev 3.24.1 January 5, 2004, Jes Sorensen
38 - Initialize completion queue to avoid OOPS on probe
39 - Handle interrupts during mailbox testing
40 Rev 3.24 November 17, 2003, Christoph Hellwig
41 - use struct list_head for completion queue
42 - avoid old Scsi_FOO typedefs
43 - cleanup 2.4 compat glue a bit
44 - use <scsi/scsi_*.h> headers on 2.6 instead of "scsi.h"
45 - make initialization for memory mapped vs port I/O more similar
46 - remove broken pci config space manipulation
47 - kill more cruft
48 - this is an almost perfect 2.6 scsi driver now! ;)
49 Rev 3.23.39 December 17, 2003, Jes Sorensen
50 - Delete completion queue from srb if mailbox command failed to
51 to avoid qla1280_done completeting qla1280_error_action's
52 obsolete context
53 - Reduce arguments for qla1280_done
54 Rev 3.23.38 October 18, 2003, Christoph Hellwig
55 - Convert to new-style hotplugable driver for 2.6
56 - Fix missing scsi_unregister/scsi_host_put on HBA removal
57 - Kill some more cruft
58 Rev 3.23.37 October 1, 2003, Jes Sorensen
59 - Make MMIO depend on CONFIG_X86_VISWS instead of yet another
60 random CONFIG option
61 - Clean up locking in probe path
62 Rev 3.23.36 October 1, 2003, Christoph Hellwig
63 - queuecommand only ever receives new commands - clear flags
64 - Reintegrate lost fixes from Linux 2.5
65 Rev 3.23.35 August 14, 2003, Jes Sorensen
66 - Build against 2.6
67 Rev 3.23.34 July 23, 2003, Jes Sorensen
68 - Remove pointless TRUE/FALSE macros
69 - Clean up vchan handling
70 Rev 3.23.33 July 3, 2003, Jes Sorensen
71 - Don't define register access macros before define determining MMIO.
72 This just happened to work out on ia64 but not elsewhere.
73 - Don't try and read from the card while it is in reset as
74 it won't respond and causes an MCA
75 Rev 3.23.32 June 23, 2003, Jes Sorensen
76 - Basic support for boot time arguments
77 Rev 3.23.31 June 8, 2003, Jes Sorensen
78 - Reduce boot time messages
79 Rev 3.23.30 June 6, 2003, Jes Sorensen
80 - Do not enable sync/wide/ppr before it has been determined
81 that the target device actually supports it
82 - Enable DMA arbitration for multi channel controllers
83 Rev 3.23.29 June 3, 2003, Jes Sorensen
84 - Port to 2.5.69
85 Rev 3.23.28 June 3, 2003, Jes Sorensen
86 - Eliminate duplicate marker commands on bus resets
87 - Handle outstanding commands appropriately on bus/device resets
88 Rev 3.23.27 May 28, 2003, Jes Sorensen
89 - Remove bogus input queue code, let the Linux SCSI layer do the work
90 - Clean up NVRAM handling, only read it once from the card
91 - Add a number of missing default nvram parameters
92 Rev 3.23.26 Beta May 28, 2003, Jes Sorensen
93 - Use completion queue for mailbox commands instead of busy wait
94 Rev 3.23.25 Beta May 27, 2003, James Bottomley
95 - Migrate to use new error handling code
96 Rev 3.23.24 Beta May 21, 2003, James Bottomley
97 - Big endian support
98 - Cleanup data direction code
99 Rev 3.23.23 Beta May 12, 2003, Jes Sorensen
100 - Switch to using MMIO instead of PIO
101 Rev 3.23.22 Beta April 15, 2003, Jes Sorensen
102 - Fix PCI parity problem with 12160 during reset.
103 Rev 3.23.21 Beta April 14, 2003, Jes Sorensen
104 - Use pci_map_page()/pci_unmap_page() instead of map_single version.
105 Rev 3.23.20 Beta April 9, 2003, Jes Sorensen
106 - Remove < 2.4.x support
107 - Introduce HOST_LOCK to make the spin lock changes portable.
108 - Remove a bunch of idiotic and unnecessary typedef's
109 - Kill all leftovers of target-mode support which never worked anyway
110 Rev 3.23.19 Beta April 11, 2002, Linus Torvalds
111 - Do qla1280_pci_config() before calling request_irq() and
112 request_region()
113 - Use pci_dma_hi32() to handle upper word of DMA addresses instead
114 of large shifts
115 - Hand correct arguments to free_irq() in case of failure
116 Rev 3.23.18 Beta April 11, 2002, Jes Sorensen
117 - Run source through Lindent and clean up the output
118 Rev 3.23.17 Beta April 11, 2002, Jes Sorensen
119 - Update SCSI firmware to qla1280 v8.15.00 and qla12160 v10.04.32
120 Rev 3.23.16 Beta March 19, 2002, Jes Sorensen
121 - Rely on mailbox commands generating interrupts - do not
122 run qla1280_isr() from ql1280_mailbox_command()
123 - Remove device_reg_t
124 - Integrate ql12160_set_target_parameters() with 1280 version
125 - Make qla1280_setup() non static
126 - Do not call qla1280_check_for_dead_scsi_bus() on every I/O request
127 sent to the card - this command pauses the firmware!!!
128 Rev 3.23.15 Beta March 19, 2002, Jes Sorensen
129 - Clean up qla1280.h - remove obsolete QL_DEBUG_LEVEL_x definitions
130 - Remove a pile of pointless and confusing (srb_t **) and
131 (scsi_lu_t *) typecasts
132 - Explicit mark that we do not use the new error handling (for now)
133 - Remove scsi_qla_host_t and use 'struct' instead
134 - Remove in_abort, watchdog_enabled, dpc, dpc_sched, bios_enabled,
135 pci_64bit_slot flags which weren't used for anything anyway
136 - Grab host->host_lock while calling qla1280_isr() from abort()
137 - Use spin_lock()/spin_unlock() in qla1280_intr_handler() - we
138 do not need to save/restore flags in the interrupt handler
139 - Enable interrupts early (before any mailbox access) in preparation
140 for cleaning up the mailbox handling
141 Rev 3.23.14 Beta March 14, 2002, Jes Sorensen
142 - Further cleanups. Remove all trace of QL_DEBUG_LEVEL_x and replace
143 it with proper use of dprintk().
144 - Make qla1280_print_scsi_cmd() and qla1280_dump_buffer() both take
145 a debug level argument to determine if data is to be printed
146 - Add KERN_* info to printk()
147 Rev 3.23.13 Beta March 14, 2002, Jes Sorensen
148 - Significant cosmetic cleanups
149 - Change debug code to use dprintk() and remove #if mess
150 Rev 3.23.12 Beta March 13, 2002, Jes Sorensen
151 - More cosmetic cleanups, fix places treating return as function
152 - use cpu_relax() in qla1280_debounce_register()
153 Rev 3.23.11 Beta March 13, 2002, Jes Sorensen
154 - Make it compile under 2.5.5
155 Rev 3.23.10 Beta October 1, 2001, Jes Sorensen
156 - Do no typecast short * to long * in QL1280BoardTbl, this
157 broke miserably on big endian boxes
158 Rev 3.23.9 Beta September 30, 2001, Jes Sorensen
159 - Remove pre 2.2 hack for checking for reentrance in interrupt handler
160 - Make data types used to receive from SCSI_{BUS,TCN,LUN}_32
161 unsigned int to match the types from struct scsi_cmnd
162 Rev 3.23.8 Beta September 29, 2001, Jes Sorensen
163 - Remove bogus timer_t typedef from qla1280.h
164 - Remove obsolete pre 2.2 PCI setup code, use proper #define's
165 for PCI_ values, call pci_set_master()
166 - Fix memleak of qla1280_buffer on module unload
167 - Only compile module parsing code #ifdef MODULE - should be
168 changed to use individual MODULE_PARM's later
169 - Remove dummy_buffer that was never modified nor printed
170 - ENTER()/LEAVE() are noops unless QL_DEBUG_LEVEL_3, hence remove
171 #ifdef QL_DEBUG_LEVEL_3/#endif around ENTER()/LEAVE() calls
172 - Remove \r from print statements, this is Linux, not DOS
173 - Remove obsolete QLA1280_{SCSILU,INTR,RING}_{LOCK,UNLOCK}
174 dummy macros
175 - Remove C++ compile hack in header file as Linux driver are not
176 supposed to be compiled as C++
177 - Kill MS_64BITS macro as it makes the code more readable
178 - Remove unnecessary flags.in_interrupts bit
179 Rev 3.23.7 Beta August 20, 2001, Jes Sorensen
180 - Dont' check for set flags on q->q_flag one by one in qla1280_next()
181 - Check whether the interrupt was generated by the QLA1280 before
182 doing any processing
183 - qla1280_status_entry(): Only zero out part of sense_buffer that
184 is not being copied into
185 - Remove more superflouous typecasts
186 - qla1280_32bit_start_scsi() replace home-brew memcpy() with memcpy()
187 Rev 3.23.6 Beta August 20, 2001, Tony Luck, Intel
188 - Don't walk the entire list in qla1280_putq_t() just to directly
189 grab the pointer to the last element afterwards
190 Rev 3.23.5 Beta August 9, 2001, Jes Sorensen
191 - Don't use IRQF_DISABLED, it's use is deprecated for this kinda driver
192 Rev 3.23.4 Beta August 8, 2001, Jes Sorensen
193 - Set dev->max_sectors to 1024
194 Rev 3.23.3 Beta August 6, 2001, Jes Sorensen
195 - Provide compat macros for pci_enable_device(), pci_find_subsys()
196 and scsi_set_pci_device()
197 - Call scsi_set_pci_device() for all devices
198 - Reduce size of kernel version dependent device probe code
199 - Move duplicate probe/init code to separate function
200 - Handle error if qla1280_mem_alloc() fails
201 - Kill OFFSET() macro and use Linux's PCI definitions instead
202 - Kill private structure defining PCI config space (struct config_reg)
203 - Only allocate I/O port region if not in MMIO mode
204 - Remove duplicate (unused) sanity check of sife of srb_t
205 Rev 3.23.2 Beta August 6, 2001, Jes Sorensen
206 - Change home-brew memset() implementations to use memset()
207 - Remove all references to COMTRACE() - accessing a PC's COM2 serial
208 port directly is not legal under Linux.
209 Rev 3.23.1 Beta April 24, 2001, Jes Sorensen
210 - Remove pre 2.2 kernel support
211 - clean up 64 bit DMA setting to use 2.4 API (provide backwards compat)
212 - Fix MMIO access to use readl/writel instead of directly
213 dereferencing pointers
214 - Nuke MSDOS debugging code
215 - Change true/false data types to int from uint8_t
216 - Use int for counters instead of uint8_t etc.
217 - Clean up size & byte order conversion macro usage
218 Rev 3.23 Beta January 11, 2001 BN Qlogic
219 - Added check of device_id when handling non
220 QLA12160s during detect().
221 Rev 3.22 Beta January 5, 2001 BN Qlogic
222 - Changed queue_task() to schedule_task()
223 for kernels 2.4.0 and higher.
224 Note: 2.4.0-testxx kernels released prior to
225 the actual 2.4.0 kernel release on January 2001
226 will get compile/link errors with schedule_task().
227 Please update your kernel to released 2.4.0 level,
228 or comment lines in this file flagged with 3.22
229 to resolve compile/link error of schedule_task().
230 - Added -DCONFIG_SMP in addition to -D__SMP__
231 in Makefile for 2.4.0 builds of driver as module.
232 Rev 3.21 Beta January 4, 2001 BN Qlogic
233 - Changed criteria of 64/32 Bit mode of HBA
234 operation according to BITS_PER_LONG rather
235 than HBA's NVRAM setting of >4Gig memory bit;
236 so that the HBA auto-configures without the need
237 to setup each system individually.
238 Rev 3.20 Beta December 5, 2000 BN Qlogic
239 - Added priority handling to IA-64 onboard SCSI
240 ISP12160 chip for kernels greater than 2.3.18.
241 - Added irqrestore for qla1280_intr_handler.
242 - Enabled /proc/scsi/qla1280 interface.
243 - Clear /proc/scsi/qla1280 counters in detect().
244 Rev 3.19 Beta October 13, 2000 BN Qlogic
245 - Declare driver_template for new kernel
246 (2.4.0 and greater) scsi initialization scheme.
247 - Update /proc/scsi entry for 2.3.18 kernels and
248 above as qla1280
249 Rev 3.18 Beta October 10, 2000 BN Qlogic
250 - Changed scan order of adapters to map
251 the QLA12160 followed by the QLA1280.
252 Rev 3.17 Beta September 18, 2000 BN Qlogic
253 - Removed warnings for 32 bit 2.4.x compiles
254 - Corrected declared size for request and response
255 DMA addresses that are kept in each ha
256 Rev. 3.16 Beta August 25, 2000 BN Qlogic
257 - Corrected 64 bit addressing issue on IA-64
258 where the upper 32 bits were not properly
259 passed to the RISC engine.
260 Rev. 3.15 Beta August 22, 2000 BN Qlogic
261 - Modified qla1280_setup_chip to properly load
262 ISP firmware for greater that 4 Gig memory on IA-64
263 Rev. 3.14 Beta August 16, 2000 BN Qlogic
264 - Added setting of dma_mask to full 64 bit
265 if flags.enable_64bit_addressing is set in NVRAM
266 Rev. 3.13 Beta August 16, 2000 BN Qlogic
267 - Use new PCI DMA mapping APIs for 2.4.x kernel
268 Rev. 3.12 July 18, 2000 Redhat & BN Qlogic
269 - Added check of pci_enable_device to detect() for 2.3.x
270 - Use pci_resource_start() instead of
271 pdev->resource[0].start in detect() for 2.3.x
272 - Updated driver version
273 Rev. 3.11 July 14, 2000 BN Qlogic
274 - Updated SCSI Firmware to following versions:
275 qla1x80: 8.13.08
276 qla1x160: 10.04.08
277 - Updated driver version to 3.11
278 Rev. 3.10 June 23, 2000 BN Qlogic
279 - Added filtering of AMI SubSys Vendor ID devices
280 Rev. 3.9
281 - DEBUG_QLA1280 undefined and new version BN Qlogic
282 Rev. 3.08b May 9, 2000 MD Dell
283 - Added logic to check against AMI subsystem vendor ID
284 Rev. 3.08 May 4, 2000 DG Qlogic
285 - Added logic to check for PCI subsystem ID.
286 Rev. 3.07 Apr 24, 2000 DG & BN Qlogic
287 - Updated SCSI Firmware to following versions:
288 qla12160: 10.01.19
289 qla1280: 8.09.00
290 Rev. 3.06 Apr 12, 2000 DG & BN Qlogic
291 - Internal revision; not released
292 Rev. 3.05 Mar 28, 2000 DG & BN Qlogic
293 - Edit correction for virt_to_bus and PROC.
294 Rev. 3.04 Mar 28, 2000 DG & BN Qlogic
295 - Merge changes from ia64 port.
296 Rev. 3.03 Mar 28, 2000 BN Qlogic
297 - Increase version to reflect new code drop with compile fix
298 of issue with inclusion of linux/spinlock for 2.3 kernels
299 Rev. 3.02 Mar 15, 2000 BN Qlogic
300 - Merge qla1280_proc_info from 2.10 code base
301 Rev. 3.01 Feb 10, 2000 BN Qlogic
302 - Corrected code to compile on a 2.2.x kernel.
303 Rev. 3.00 Jan 17, 2000 DG Qlogic
304 - Added 64-bit support.
305 Rev. 2.07 Nov 9, 1999 DG Qlogic
306 - Added new routine to set target parameters for ISP12160.
307 Rev. 2.06 Sept 10, 1999 DG Qlogic
308 - Added support for ISP12160 Ultra 3 chip.
309 Rev. 2.03 August 3, 1999 Fred Lewis, Intel DuPont
310 - Modified code to remove errors generated when compiling with
311 Cygnus IA64 Compiler.
312 - Changed conversion of pointers to unsigned longs instead of integers.
313 - Changed type of I/O port variables from uint32_t to unsigned long.
314 - Modified OFFSET macro to work with 64-bit as well as 32-bit.
315 - Changed sprintf and printk format specifiers for pointers to %p.
316 - Changed some int to long type casts where needed in sprintf & printk.
317 - Added l modifiers to sprintf and printk format specifiers for longs.
318 - Removed unused local variables.
319 Rev. 1.20 June 8, 1999 DG, Qlogic
320 Changes to support RedHat release 6.0 (kernel 2.2.5).
321 - Added SCSI exclusive access lock (io_request_lock) when accessing
322 the adapter.
323 - Added changes for the new LINUX interface template. Some new error
324 handling routines have been added to the template, but for now we
325 will use the old ones.
326 - Initial Beta Release.
327*****************************************************************************/
328
329
330#include <linux/module.h>
331
332#include <linux/types.h>
333#include <linux/string.h>
334#include <linux/errno.h>
335#include <linux/kernel.h>
336#include <linux/ioport.h>
337#include <linux/delay.h>
338#include <linux/timer.h>
339#include <linux/pci.h>
340#include <linux/proc_fs.h>
341#include <linux/stat.h>
342#include <linux/pci_ids.h>
343#include <linux/interrupt.h>
344#include <linux/init.h>
345#include <linux/dma-mapping.h>
346#include <linux/firmware.h>
347
348#include <asm/io.h>
349#include <asm/irq.h>
350#include <asm/byteorder.h>
351#include <asm/processor.h>
352#include <asm/types.h>
353
354#include <scsi/scsi.h>
355#include <scsi/scsi_cmnd.h>
356#include <scsi/scsi_device.h>
357#include <scsi/scsi_host.h>
358#include <scsi/scsi_tcq.h>
359
360
361/*
362 * Compile time Options:
363 * 0 - Disable and 1 - Enable
364 */
365#define DEBUG_QLA1280_INTR 0
366#define DEBUG_PRINT_NVRAM 0
367#define DEBUG_QLA1280 0
368
369#define MEMORY_MAPPED_IO 1
370
371#include "qla1280.h"
372
373#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
374#define QLA_64BIT_PTR 1
375#endif
376
377#define NVRAM_DELAY() udelay(500) /* 2 microseconds */
378
379#define IS_ISP1040(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020)
380#define IS_ISP1x40(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020 || \
381 ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1240)
382#define IS_ISP1x160(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP10160 || \
383 ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP12160)
384
385
386static int qla1280_probe_one(struct pci_dev *, const struct pci_device_id *);
387static void qla1280_remove_one(struct pci_dev *);
388
389/*
390 * QLogic Driver Support Function Prototypes.
391 */
392static void qla1280_done(struct scsi_qla_host *);
393static int qla1280_get_token(char *);
394static int qla1280_setup(char *s) __init;
395
396/*
397 * QLogic ISP1280 Hardware Support Function Prototypes.
398 */
399static int qla1280_load_firmware(struct scsi_qla_host *);
400static int qla1280_init_rings(struct scsi_qla_host *);
401static int qla1280_nvram_config(struct scsi_qla_host *);
402static int qla1280_mailbox_command(struct scsi_qla_host *,
403 uint8_t, uint16_t *);
404static int qla1280_bus_reset(struct scsi_qla_host *, int);
405static int qla1280_device_reset(struct scsi_qla_host *, int, int);
406static int qla1280_abort_command(struct scsi_qla_host *, struct srb *, int);
407static int qla1280_abort_isp(struct scsi_qla_host *);
408#ifdef QLA_64BIT_PTR
409static int qla1280_64bit_start_scsi(struct scsi_qla_host *, struct srb *);
410#else
411static int qla1280_32bit_start_scsi(struct scsi_qla_host *, struct srb *);
412#endif
413static void qla1280_nv_write(struct scsi_qla_host *, uint16_t);
414static void qla1280_poll(struct scsi_qla_host *);
415static void qla1280_reset_adapter(struct scsi_qla_host *);
416static void qla1280_marker(struct scsi_qla_host *, int, int, int, u8);
417static void qla1280_isp_cmd(struct scsi_qla_host *);
418static void qla1280_isr(struct scsi_qla_host *, struct list_head *);
419static void qla1280_rst_aen(struct scsi_qla_host *);
420static void qla1280_status_entry(struct scsi_qla_host *, struct response *,
421 struct list_head *);
422static void qla1280_error_entry(struct scsi_qla_host *, struct response *,
423 struct list_head *);
424static uint16_t qla1280_get_nvram_word(struct scsi_qla_host *, uint32_t);
425static uint16_t qla1280_nvram_request(struct scsi_qla_host *, uint32_t);
426static uint16_t qla1280_debounce_register(volatile uint16_t __iomem *);
427static request_t *qla1280_req_pkt(struct scsi_qla_host *);
428static int qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *,
429 unsigned int);
430static void qla1280_get_target_parameters(struct scsi_qla_host *,
431 struct scsi_device *);
432static int qla1280_set_target_parameters(struct scsi_qla_host *, int, int);
433
434
435static struct qla_driver_setup driver_setup;
436
437/*
438 * convert scsi data direction to request_t control flags
439 */
440static inline uint16_t
441qla1280_data_direction(struct scsi_cmnd *cmnd)
442{
443 switch(cmnd->sc_data_direction) {
444 case DMA_FROM_DEVICE:
445 return BIT_5;
446 case DMA_TO_DEVICE:
447 return BIT_6;
448 case DMA_BIDIRECTIONAL:
449 return BIT_5 | BIT_6;
450 /*
451 * We could BUG() on default here if one of the four cases aren't
452 * met, but then again if we receive something like that from the
453 * SCSI layer we have more serious problems. This shuts up GCC.
454 */
455 case DMA_NONE:
456 default:
457 return 0;
458 }
459}
460
461#if DEBUG_QLA1280
462static void __qla1280_print_scsi_cmd(struct scsi_cmnd * cmd);
463static void __qla1280_dump_buffer(char *, int);
464#endif
465
466
467/*
468 * insmod needs to find the variable and make it point to something
469 */
470#ifdef MODULE
471static char *qla1280;
472
473/* insmod qla1280 options=verbose" */
474module_param(qla1280, charp, 0);
475#else
476__setup("qla1280=", qla1280_setup);
477#endif
478
479
480#define CMD_CDBLEN(Cmnd) Cmnd->cmd_len
481#define CMD_CDBP(Cmnd) Cmnd->cmnd
482#define CMD_SNSP(Cmnd) Cmnd->sense_buffer
483#define CMD_SNSLEN(Cmnd) SCSI_SENSE_BUFFERSIZE
484#define CMD_RESULT(Cmnd) Cmnd->result
485#define CMD_HANDLE(Cmnd) Cmnd->host_scribble
486
487#define CMD_HOST(Cmnd) Cmnd->device->host
488#define SCSI_BUS_32(Cmnd) Cmnd->device->channel
489#define SCSI_TCN_32(Cmnd) Cmnd->device->id
490#define SCSI_LUN_32(Cmnd) Cmnd->device->lun
491
492
493/*****************************************/
494/* ISP Boards supported by this driver */
495/*****************************************/
496
497struct qla_boards {
498 char *name; /* Board ID String */
499 int numPorts; /* Number of SCSI ports */
500 int fw_index; /* index into qla1280_fw_tbl for firmware */
501};
502
503/* NOTE: the last argument in each entry is used to index ql1280_board_tbl */
504static struct pci_device_id qla1280_pci_tbl[] = {
505 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP12160,
506 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
507 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1020,
508 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
509 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1080,
510 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
511 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1240,
512 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
513 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1280,
514 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
515 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP10160,
516 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
517 {0,}
518};
519MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl);
520
521static DEFINE_MUTEX(qla1280_firmware_mutex);
522
523struct qla_fw {
524 char *fwname;
525 const struct firmware *fw;
526};
527
528#define QL_NUM_FW_IMAGES 3
529
530static struct qla_fw qla1280_fw_tbl[QL_NUM_FW_IMAGES] = {
531 {"qlogic/1040.bin", NULL}, /* image 0 */
532 {"qlogic/1280.bin", NULL}, /* image 1 */
533 {"qlogic/12160.bin", NULL}, /* image 2 */
534};
535
536/* NOTE: Order of boards in this table must match order in qla1280_pci_tbl */
537static struct qla_boards ql1280_board_tbl[] = {
538 {.name = "QLA12160", .numPorts = 2, .fw_index = 2},
539 {.name = "QLA1040" , .numPorts = 1, .fw_index = 0},
540 {.name = "QLA1080" , .numPorts = 1, .fw_index = 1},
541 {.name = "QLA1240" , .numPorts = 2, .fw_index = 1},
542 {.name = "QLA1280" , .numPorts = 2, .fw_index = 1},
543 {.name = "QLA10160", .numPorts = 1, .fw_index = 2},
544 {.name = " ", .numPorts = 0, .fw_index = -1},
545};
546
547static int qla1280_verbose = 1;
548
549#if DEBUG_QLA1280
550static int ql_debug_level = 1;
551#define dprintk(level, format, a...) \
552 do { if (ql_debug_level >= level) printk(KERN_ERR format, ##a); } while(0)
553#define qla1280_dump_buffer(level, buf, size) \
554 if (ql_debug_level >= level) __qla1280_dump_buffer(buf, size)
555#define qla1280_print_scsi_cmd(level, cmd) \
556 if (ql_debug_level >= level) __qla1280_print_scsi_cmd(cmd)
557#else
558#define ql_debug_level 0
559#define dprintk(level, format, a...) do{}while(0)
560#define qla1280_dump_buffer(a, b, c) do{}while(0)
561#define qla1280_print_scsi_cmd(a, b) do{}while(0)
562#endif
563
564#define ENTER(x) dprintk(3, "qla1280 : Entering %s()\n", x);
565#define LEAVE(x) dprintk(3, "qla1280 : Leaving %s()\n", x);
566#define ENTER_INTR(x) dprintk(4, "qla1280 : Entering %s()\n", x);
567#define LEAVE_INTR(x) dprintk(4, "qla1280 : Leaving %s()\n", x);
568
569
570static int qla1280_read_nvram(struct scsi_qla_host *ha)
571{
572 uint16_t *wptr;
573 uint8_t chksum;
574 int cnt, i;
575 struct nvram *nv;
576
577 ENTER("qla1280_read_nvram");
578
579 if (driver_setup.no_nvram)
580 return 1;
581
582 printk(KERN_INFO "scsi(%ld): Reading NVRAM\n", ha->host_no);
583
584 wptr = (uint16_t *)&ha->nvram;
585 nv = &ha->nvram;
586 chksum = 0;
587 for (cnt = 0; cnt < 3; cnt++) {
588 *wptr = qla1280_get_nvram_word(ha, cnt);
589 chksum += *wptr & 0xff;
590 chksum += (*wptr >> 8) & 0xff;
591 wptr++;
592 }
593
594 if (nv->id0 != 'I' || nv->id1 != 'S' ||
595 nv->id2 != 'P' || nv->id3 != ' ' || nv->version < 1) {
596 dprintk(2, "Invalid nvram ID or version!\n");
597 chksum = 1;
598 } else {
599 for (; cnt < sizeof(struct nvram); cnt++) {
600 *wptr = qla1280_get_nvram_word(ha, cnt);
601 chksum += *wptr & 0xff;
602 chksum += (*wptr >> 8) & 0xff;
603 wptr++;
604 }
605 }
606
607 dprintk(3, "qla1280_read_nvram: NVRAM Magic ID= %c %c %c %02x"
608 " version %i\n", nv->id0, nv->id1, nv->id2, nv->id3,
609 nv->version);
610
611
612 if (chksum) {
613 if (!driver_setup.no_nvram)
614 printk(KERN_WARNING "scsi(%ld): Unable to identify or "
615 "validate NVRAM checksum, using default "
616 "settings\n", ha->host_no);
617 ha->nvram_valid = 0;
618 } else
619 ha->nvram_valid = 1;
620
621 /* The firmware interface is, um, interesting, in that the
622 * actual firmware image on the chip is little endian, thus,
623 * the process of taking that image to the CPU would end up
624 * little endian. However, the firmware interface requires it
625 * to be read a word (two bytes) at a time.
626 *
627 * The net result of this would be that the word (and
628 * doubleword) quantities in the firmware would be correct, but
629 * the bytes would be pairwise reversed. Since most of the
630 * firmware quantities are, in fact, bytes, we do an extra
631 * le16_to_cpu() in the firmware read routine.
632 *
633 * The upshot of all this is that the bytes in the firmware
634 * are in the correct places, but the 16 and 32 bit quantities
635 * are still in little endian format. We fix that up below by
636 * doing extra reverses on them */
637 nv->isp_parameter = cpu_to_le16(nv->isp_parameter);
638 nv->firmware_feature.w = cpu_to_le16(nv->firmware_feature.w);
639 for(i = 0; i < MAX_BUSES; i++) {
640 nv->bus[i].selection_timeout = cpu_to_le16(nv->bus[i].selection_timeout);
641 nv->bus[i].max_queue_depth = cpu_to_le16(nv->bus[i].max_queue_depth);
642 }
643 dprintk(1, "qla1280_read_nvram: Completed Reading NVRAM\n");
644 LEAVE("qla1280_read_nvram");
645
646 return chksum;
647}
648
649/**************************************************************************
650 * qla1280_info
651 * Return a string describing the driver.
652 **************************************************************************/
653static const char *
654qla1280_info(struct Scsi_Host *host)
655{
656 static char qla1280_scsi_name_buffer[125];
657 char *bp;
658 struct scsi_qla_host *ha;
659 struct qla_boards *bdp;
660
661 bp = &qla1280_scsi_name_buffer[0];
662 ha = (struct scsi_qla_host *)host->hostdata;
663 bdp = &ql1280_board_tbl[ha->devnum];
664 memset(bp, 0, sizeof(qla1280_scsi_name_buffer));
665
666 sprintf (bp,
667 "QLogic %s PCI to SCSI Host Adapter\n"
668 " Firmware version: %2d.%02d.%02d, Driver version %s",
669 &bdp->name[0], ha->fwver1, ha->fwver2, ha->fwver3,
670 QLA1280_VERSION);
671 return bp;
672}
673
674/**************************************************************************
675 * qla1280_queuecommand
676 * Queue a command to the controller.
677 *
678 * Note:
679 * The mid-level driver tries to ensures that queuecommand never gets invoked
680 * concurrently with itself or the interrupt handler (although the
681 * interrupt handler may call this routine as part of request-completion
682 * handling). Unfortunately, it sometimes calls the scheduler in interrupt
683 * context which is a big NO! NO!.
684 **************************************************************************/
685static int qla1280_queuecommand_lck(struct scsi_cmnd *cmd)
686{
687 struct Scsi_Host *host = cmd->device->host;
688 struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
689 struct srb *sp = scsi_cmd_priv(cmd);
690 int status;
691
692 sp->cmd = cmd;
693 sp->flags = 0;
694 sp->wait = NULL;
695 CMD_HANDLE(cmd) = (unsigned char *)NULL;
696
697 qla1280_print_scsi_cmd(5, cmd);
698
699#ifdef QLA_64BIT_PTR
700 /*
701 * Using 64 bit commands if the PCI bridge doesn't support it is a
702 * bit wasteful, however this should really only happen if one's
703 * PCI controller is completely broken, like the BCM1250. For
704 * sane hardware this is not an issue.
705 */
706 status = qla1280_64bit_start_scsi(ha, sp);
707#else
708 status = qla1280_32bit_start_scsi(ha, sp);
709#endif
710 return status;
711}
712
713static DEF_SCSI_QCMD(qla1280_queuecommand)
714
715enum action {
716 ABORT_COMMAND,
717 DEVICE_RESET,
718 BUS_RESET,
719};
720
721
722static void qla1280_mailbox_timeout(struct timer_list *t)
723{
724 struct scsi_qla_host *ha = from_timer(ha, t, mailbox_timer);
725 struct device_reg __iomem *reg;
726 reg = ha->iobase;
727
728 ha->mailbox_out[0] = RD_REG_WORD(®->mailbox0);
729 printk(KERN_ERR "scsi(%ld): mailbox timed out, mailbox0 %04x, "
730 "ictrl %04x, istatus %04x\n", ha->host_no, ha->mailbox_out[0],
731 RD_REG_WORD(®->ictrl), RD_REG_WORD(®->istatus));
732 complete(ha->mailbox_wait);
733}
734
735static int
736_qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp,
737 struct completion *wait)
738{
739 int status = FAILED;
740 struct scsi_cmnd *cmd = sp->cmd;
741
742 spin_unlock_irq(ha->host->host_lock);
743 wait_for_completion_timeout(wait, 4*HZ);
744 spin_lock_irq(ha->host->host_lock);
745 sp->wait = NULL;
746 if(CMD_HANDLE(cmd) == COMPLETED_HANDLE) {
747 status = SUCCESS;
748 scsi_done(cmd);
749 }
750 return status;
751}
752
753static int
754qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp)
755{
756 DECLARE_COMPLETION_ONSTACK(wait);
757
758 sp->wait = &wait;
759 return _qla1280_wait_for_single_command(ha, sp, &wait);
760}
761
762static int
763qla1280_wait_for_pending_commands(struct scsi_qla_host *ha, int bus, int target)
764{
765 int cnt;
766 int status;
767 struct srb *sp;
768 struct scsi_cmnd *cmd;
769
770 status = SUCCESS;
771
772 /*
773 * Wait for all commands with the designated bus/target
774 * to be completed by the firmware
775 */
776 for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
777 sp = ha->outstanding_cmds[cnt];
778 if (sp) {
779 cmd = sp->cmd;
780
781 if (bus >= 0 && SCSI_BUS_32(cmd) != bus)
782 continue;
783 if (target >= 0 && SCSI_TCN_32(cmd) != target)
784 continue;
785
786 status = qla1280_wait_for_single_command(ha, sp);
787 if (status == FAILED)
788 break;
789 }
790 }
791 return status;
792}
793
794/**************************************************************************
795 * qla1280_error_action
796 * The function will attempt to perform a specified error action and
797 * wait for the results (or time out).
798 *
799 * Input:
800 * cmd = Linux SCSI command packet of the command that cause the
801 * bus reset.
802 * action = error action to take (see action_t)
803 *
804 * Returns:
805 * SUCCESS or FAILED
806 *
807 **************************************************************************/
808static int
809qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
810{
811 struct scsi_qla_host *ha;
812 int bus, target, lun;
813 struct srb *sp;
814 int i, found;
815 int result=FAILED;
816 int wait_for_bus=-1;
817 int wait_for_target = -1;
818 DECLARE_COMPLETION_ONSTACK(wait);
819
820 ENTER("qla1280_error_action");
821
822 ha = (struct scsi_qla_host *)(CMD_HOST(cmd)->hostdata);
823 sp = scsi_cmd_priv(cmd);
824 bus = SCSI_BUS_32(cmd);
825 target = SCSI_TCN_32(cmd);
826 lun = SCSI_LUN_32(cmd);
827
828 dprintk(4, "error_action %i, istatus 0x%04x\n", action,
829 RD_REG_WORD(&ha->iobase->istatus));
830
831 dprintk(4, "host_cmd 0x%04x, ictrl 0x%04x, jiffies %li\n",
832 RD_REG_WORD(&ha->iobase->host_cmd),
833 RD_REG_WORD(&ha->iobase->ictrl), jiffies);
834
835 if (qla1280_verbose)
836 printk(KERN_INFO "scsi(%li): Resetting Cmnd=0x%p, "
837 "Handle=0x%p, action=0x%x\n",
838 ha->host_no, cmd, CMD_HANDLE(cmd), action);
839
840 /*
841 * Check to see if we have the command in the outstanding_cmds[]
842 * array. If not then it must have completed before this error
843 * action was initiated. If the error_action isn't ABORT_COMMAND
844 * then the driver must proceed with the requested action.
845 */
846 found = -1;
847 for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
848 if (sp == ha->outstanding_cmds[i]) {
849 found = i;
850 sp->wait = &wait; /* we'll wait for it to complete */
851 break;
852 }
853 }
854
855 if (found < 0) { /* driver doesn't have command */
856 result = SUCCESS;
857 if (qla1280_verbose) {
858 printk(KERN_INFO
859 "scsi(%ld:%d:%d:%d): specified command has "
860 "already completed.\n", ha->host_no, bus,
861 target, lun);
862 }
863 }
864
865 switch (action) {
866
867 case ABORT_COMMAND:
868 dprintk(1, "qla1280: RISC aborting command\n");
869 /*
870 * The abort might fail due to race when the host_lock
871 * is released to issue the abort. As such, we
872 * don't bother to check the return status.
873 */
874 if (found >= 0)
875 qla1280_abort_command(ha, sp, found);
876 break;
877
878 case DEVICE_RESET:
879 if (qla1280_verbose)
880 printk(KERN_INFO
881 "scsi(%ld:%d:%d:%d): Queueing device reset "
882 "command.\n", ha->host_no, bus, target, lun);
883 if (qla1280_device_reset(ha, bus, target) == 0) {
884 /* issued device reset, set wait conditions */
885 wait_for_bus = bus;
886 wait_for_target = target;
887 }
888 break;
889
890 case BUS_RESET:
891 if (qla1280_verbose)
892 printk(KERN_INFO "qla1280(%ld:%d): Issued bus "
893 "reset.\n", ha->host_no, bus);
894 if (qla1280_bus_reset(ha, bus) == 0) {
895 /* issued bus reset, set wait conditions */
896 wait_for_bus = bus;
897 }
898 break;
899
900 default:
901 dprintk(1, "RESET invalid action %d\n", action);
902 return FAILED;
903 }
904
905 /*
906 * At this point, the host_lock has been released and retaken
907 * by the issuance of the mailbox command.
908 * Wait for the command passed in by the mid-layer if it
909 * was found by the driver. It might have been returned
910 * between eh recovery steps, hence the check of the "found"
911 * variable.
912 */
913
914 if (found >= 0)
915 result = _qla1280_wait_for_single_command(ha, sp, &wait);
916
917 if (action == ABORT_COMMAND && result != SUCCESS) {
918 printk(KERN_WARNING
919 "scsi(%li:%i:%i:%i): "
920 "Unable to abort command!\n",
921 ha->host_no, bus, target, lun);
922 }
923
924 /*
925 * If the command passed in by the mid-layer has been
926 * returned by the board, then wait for any additional
927 * commands which are supposed to complete based upon
928 * the error action.
929 *
930 * All commands are unconditionally returned during a
931 * call to qla1280_abort_isp(), ADAPTER_RESET. No need
932 * to wait for them.
933 */
934 if (result == SUCCESS && wait_for_bus >= 0) {
935 result = qla1280_wait_for_pending_commands(ha,
936 wait_for_bus, wait_for_target);
937 }
938
939 dprintk(1, "RESET returning %d\n", result);
940
941 LEAVE("qla1280_error_action");
942 return result;
943}
944
945/**************************************************************************
946 * qla1280_abort
947 * Abort the specified SCSI command(s).
948 **************************************************************************/
949static int
950qla1280_eh_abort(struct scsi_cmnd * cmd)
951{
952 int rc;
953
954 spin_lock_irq(cmd->device->host->host_lock);
955 rc = qla1280_error_action(cmd, ABORT_COMMAND);
956 spin_unlock_irq(cmd->device->host->host_lock);
957
958 return rc;
959}
960
961/**************************************************************************
962 * qla1280_device_reset
963 * Reset the specified SCSI device
964 **************************************************************************/
965static int
966qla1280_eh_device_reset(struct scsi_cmnd *cmd)
967{
968 int rc;
969
970 spin_lock_irq(cmd->device->host->host_lock);
971 rc = qla1280_error_action(cmd, DEVICE_RESET);
972 spin_unlock_irq(cmd->device->host->host_lock);
973
974 return rc;
975}
976
977/**************************************************************************
978 * qla1280_bus_reset
979 * Reset the specified bus.
980 **************************************************************************/
981static int
982qla1280_eh_bus_reset(struct scsi_cmnd *cmd)
983{
984 int rc;
985
986 spin_lock_irq(cmd->device->host->host_lock);
987 rc = qla1280_error_action(cmd, BUS_RESET);
988 spin_unlock_irq(cmd->device->host->host_lock);
989
990 return rc;
991}
992
993/**************************************************************************
994 * qla1280_adapter_reset
995 * Reset the specified adapter (both channels)
996 **************************************************************************/
997static int
998qla1280_eh_adapter_reset(struct scsi_cmnd *cmd)
999{
1000 int rc = SUCCESS;
1001 struct Scsi_Host *shost = cmd->device->host;
1002 struct scsi_qla_host *ha = (struct scsi_qla_host *)shost->hostdata;
1003
1004 spin_lock_irq(shost->host_lock);
1005 if (qla1280_verbose) {
1006 printk(KERN_INFO
1007 "scsi(%ld): Issued ADAPTER RESET\n",
1008 ha->host_no);
1009 printk(KERN_INFO "scsi(%ld): I/O processing will "
1010 "continue automatically\n", ha->host_no);
1011 }
1012 ha->flags.reset_active = 1;
1013
1014 if (qla1280_abort_isp(ha) != 0) { /* it's dead */
1015 rc = FAILED;
1016 }
1017
1018 ha->flags.reset_active = 0;
1019
1020 spin_unlock_irq(shost->host_lock);
1021
1022 return rc;
1023}
1024
1025static int
1026qla1280_biosparam(struct scsi_device *sdev, struct block_device *bdev,
1027 sector_t capacity, int geom[])
1028{
1029 int heads, sectors, cylinders;
1030
1031 heads = 64;
1032 sectors = 32;
1033 cylinders = (unsigned long)capacity / (heads * sectors);
1034 if (cylinders > 1024) {
1035 heads = 255;
1036 sectors = 63;
1037 cylinders = (unsigned long)capacity / (heads * sectors);
1038 /* if (cylinders > 1023)
1039 cylinders = 1023; */
1040 }
1041
1042 geom[0] = heads;
1043 geom[1] = sectors;
1044 geom[2] = cylinders;
1045
1046 return 0;
1047}
1048
1049
1050/* disable risc and host interrupts */
1051static inline void
1052qla1280_disable_intrs(struct scsi_qla_host *ha)
1053{
1054 WRT_REG_WORD(&ha->iobase->ictrl, 0);
1055 RD_REG_WORD(&ha->iobase->ictrl); /* PCI Posted Write flush */
1056}
1057
1058/* enable risc and host interrupts */
1059static inline void
1060qla1280_enable_intrs(struct scsi_qla_host *ha)
1061{
1062 WRT_REG_WORD(&ha->iobase->ictrl, (ISP_EN_INT | ISP_EN_RISC));
1063 RD_REG_WORD(&ha->iobase->ictrl); /* PCI Posted Write flush */
1064}
1065
1066/**************************************************************************
1067 * qla1280_intr_handler
1068 * Handles the H/W interrupt
1069 **************************************************************************/
1070static irqreturn_t
1071qla1280_intr_handler(int irq, void *dev_id)
1072{
1073 struct scsi_qla_host *ha;
1074 struct device_reg __iomem *reg;
1075 u16 data;
1076 int handled = 0;
1077
1078 ENTER_INTR ("qla1280_intr_handler");
1079 ha = (struct scsi_qla_host *)dev_id;
1080
1081 spin_lock(ha->host->host_lock);
1082
1083 ha->isr_count++;
1084 reg = ha->iobase;
1085
1086 qla1280_disable_intrs(ha);
1087
1088 data = qla1280_debounce_register(®->istatus);
1089 /* Check for pending interrupts. */
1090 if (data & RISC_INT) {
1091 qla1280_isr(ha, &ha->done_q);
1092 handled = 1;
1093 }
1094 if (!list_empty(&ha->done_q))
1095 qla1280_done(ha);
1096
1097 spin_unlock(ha->host->host_lock);
1098
1099 qla1280_enable_intrs(ha);
1100
1101 LEAVE_INTR("qla1280_intr_handler");
1102 return IRQ_RETVAL(handled);
1103}
1104
1105
1106static int
1107qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target)
1108{
1109 uint8_t mr;
1110 uint16_t mb[MAILBOX_REGISTER_COUNT];
1111 struct nvram *nv;
1112 int status, lun;
1113
1114 nv = &ha->nvram;
1115
1116 mr = BIT_3 | BIT_2 | BIT_1 | BIT_0;
1117
1118 /* Set Target Parameters. */
1119 mb[0] = MBC_SET_TARGET_PARAMETERS;
1120 mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
1121 mb[2] = nv->bus[bus].target[target].parameter.renegotiate_on_error << 8;
1122 mb[2] |= nv->bus[bus].target[target].parameter.stop_queue_on_check << 9;
1123 mb[2] |= nv->bus[bus].target[target].parameter.auto_request_sense << 10;
1124 mb[2] |= nv->bus[bus].target[target].parameter.tag_queuing << 11;
1125 mb[2] |= nv->bus[bus].target[target].parameter.enable_sync << 12;
1126 mb[2] |= nv->bus[bus].target[target].parameter.enable_wide << 13;
1127 mb[2] |= nv->bus[bus].target[target].parameter.parity_checking << 14;
1128 mb[2] |= nv->bus[bus].target[target].parameter.disconnect_allowed << 15;
1129
1130 if (IS_ISP1x160(ha)) {
1131 mb[2] |= nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr << 5;
1132 mb[3] = (nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8);
1133 mb[6] = (nv->bus[bus].target[target].ppr_1x160.flags.ppr_options << 8) |
1134 nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width;
1135 mr |= BIT_6;
1136 } else {
1137 mb[3] = (nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8);
1138 }
1139 mb[3] |= nv->bus[bus].target[target].sync_period;
1140
1141 status = qla1280_mailbox_command(ha, mr, mb);
1142
1143 /* Set Device Queue Parameters. */
1144 for (lun = 0; lun < MAX_LUNS; lun++) {
1145 mb[0] = MBC_SET_DEVICE_QUEUE;
1146 mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
1147 mb[1] |= lun;
1148 mb[2] = nv->bus[bus].max_queue_depth;
1149 mb[3] = nv->bus[bus].target[target].execution_throttle;
1150 status |= qla1280_mailbox_command(ha, 0x0f, mb);
1151 }
1152
1153 if (status)
1154 printk(KERN_WARNING "scsi(%ld:%i:%i): "
1155 "qla1280_set_target_parameters() failed\n",
1156 ha->host_no, bus, target);
1157 return status;
1158}
1159
1160
1161/**************************************************************************
1162 * qla1280_slave_configure
1163 *
1164 * Description:
1165 * Determines the queue depth for a given device. There are two ways
1166 * a queue depth can be obtained for a tagged queueing device. One
1167 * way is the default queue depth which is determined by whether
1168 * If it is defined, then it is used
1169 * as the default queue depth. Otherwise, we use either 4 or 8 as the
1170 * default queue depth (dependent on the number of hardware SCBs).
1171 **************************************************************************/
1172static int
1173qla1280_slave_configure(struct scsi_device *device)
1174{
1175 struct scsi_qla_host *ha;
1176 int default_depth = 3;
1177 int bus = device->channel;
1178 int target = device->id;
1179 int status = 0;
1180 struct nvram *nv;
1181 unsigned long flags;
1182
1183 ha = (struct scsi_qla_host *)device->host->hostdata;
1184 nv = &ha->nvram;
1185
1186 if (qla1280_check_for_dead_scsi_bus(ha, bus))
1187 return 1;
1188
1189 if (device->tagged_supported &&
1190 (ha->bus_settings[bus].qtag_enables & (BIT_0 << target))) {
1191 scsi_change_queue_depth(device, ha->bus_settings[bus].hiwat);
1192 } else {
1193 scsi_change_queue_depth(device, default_depth);
1194 }
1195
1196 nv->bus[bus].target[target].parameter.enable_sync = device->sdtr;
1197 nv->bus[bus].target[target].parameter.enable_wide = device->wdtr;
1198 nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr;
1199
1200 if (driver_setup.no_sync ||
1201 (driver_setup.sync_mask &&
1202 (~driver_setup.sync_mask & (1 << target))))
1203 nv->bus[bus].target[target].parameter.enable_sync = 0;
1204 if (driver_setup.no_wide ||
1205 (driver_setup.wide_mask &&
1206 (~driver_setup.wide_mask & (1 << target))))
1207 nv->bus[bus].target[target].parameter.enable_wide = 0;
1208 if (IS_ISP1x160(ha)) {
1209 if (driver_setup.no_ppr ||
1210 (driver_setup.ppr_mask &&
1211 (~driver_setup.ppr_mask & (1 << target))))
1212 nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
1213 }
1214
1215 spin_lock_irqsave(ha->host->host_lock, flags);
1216 if (nv->bus[bus].target[target].parameter.enable_sync)
1217 status = qla1280_set_target_parameters(ha, bus, target);
1218 qla1280_get_target_parameters(ha, device);
1219 spin_unlock_irqrestore(ha->host->host_lock, flags);
1220 return status;
1221}
1222
1223
1224/*
1225 * qla1280_done
1226 * Process completed commands.
1227 *
1228 * Input:
1229 * ha = adapter block pointer.
1230 */
1231static void
1232qla1280_done(struct scsi_qla_host *ha)
1233{
1234 struct srb *sp;
1235 struct list_head *done_q;
1236 int bus, target;
1237 struct scsi_cmnd *cmd;
1238
1239 ENTER("qla1280_done");
1240
1241 done_q = &ha->done_q;
1242
1243 while (!list_empty(done_q)) {
1244 sp = list_entry(done_q->next, struct srb, list);
1245
1246 list_del(&sp->list);
1247
1248 cmd = sp->cmd;
1249 bus = SCSI_BUS_32(cmd);
1250 target = SCSI_TCN_32(cmd);
1251
1252 switch ((CMD_RESULT(cmd) >> 16)) {
1253 case DID_RESET:
1254 /* Issue marker command. */
1255 if (!ha->flags.abort_isp_active)
1256 qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
1257 break;
1258 case DID_ABORT:
1259 sp->flags &= ~SRB_ABORT_PENDING;
1260 sp->flags |= SRB_ABORTED;
1261 break;
1262 default:
1263 break;
1264 }
1265
1266 /* Release memory used for this I/O */
1267 scsi_dma_unmap(cmd);
1268
1269 /* Call the mid-level driver interrupt handler */
1270 ha->actthreads--;
1271
1272 if (sp->wait == NULL)
1273 scsi_done(cmd);
1274 else
1275 complete(sp->wait);
1276 }
1277 LEAVE("qla1280_done");
1278}
1279
1280/*
1281 * Translates a ISP error to a Linux SCSI error
1282 */
1283static int
1284qla1280_return_status(struct response * sts, struct scsi_cmnd *cp)
1285{
1286 int host_status = DID_ERROR;
1287 uint16_t comp_status = le16_to_cpu(sts->comp_status);
1288 uint16_t state_flags = le16_to_cpu(sts->state_flags);
1289 uint32_t residual_length = le32_to_cpu(sts->residual_length);
1290 uint16_t scsi_status = le16_to_cpu(sts->scsi_status);
1291#if DEBUG_QLA1280_INTR
1292 static char *reason[] = {
1293 "DID_OK",
1294 "DID_NO_CONNECT",
1295 "DID_BUS_BUSY",
1296 "DID_TIME_OUT",
1297 "DID_BAD_TARGET",
1298 "DID_ABORT",
1299 "DID_PARITY",
1300 "DID_ERROR",
1301 "DID_RESET",
1302 "DID_BAD_INTR"
1303 };
1304#endif /* DEBUG_QLA1280_INTR */
1305
1306 ENTER("qla1280_return_status");
1307
1308#if DEBUG_QLA1280_INTR
1309 /*
1310 dprintk(1, "qla1280_return_status: compl status = 0x%04x\n",
1311 comp_status);
1312 */
1313#endif
1314
1315 switch (comp_status) {
1316 case CS_COMPLETE:
1317 host_status = DID_OK;
1318 break;
1319
1320 case CS_INCOMPLETE:
1321 if (!(state_flags & SF_GOT_BUS))
1322 host_status = DID_NO_CONNECT;
1323 else if (!(state_flags & SF_GOT_TARGET))
1324 host_status = DID_BAD_TARGET;
1325 else if (!(state_flags & SF_SENT_CDB))
1326 host_status = DID_ERROR;
1327 else if (!(state_flags & SF_TRANSFERRED_DATA))
1328 host_status = DID_ERROR;
1329 else if (!(state_flags & SF_GOT_STATUS))
1330 host_status = DID_ERROR;
1331 else if (!(state_flags & SF_GOT_SENSE))
1332 host_status = DID_ERROR;
1333 break;
1334
1335 case CS_RESET:
1336 host_status = DID_RESET;
1337 break;
1338
1339 case CS_ABORTED:
1340 host_status = DID_ABORT;
1341 break;
1342
1343 case CS_TIMEOUT:
1344 host_status = DID_TIME_OUT;
1345 break;
1346
1347 case CS_DATA_OVERRUN:
1348 dprintk(2, "Data overrun 0x%x\n", residual_length);
1349 dprintk(2, "qla1280_return_status: response packet data\n");
1350 qla1280_dump_buffer(2, (char *)sts, RESPONSE_ENTRY_SIZE);
1351 host_status = DID_ERROR;
1352 break;
1353
1354 case CS_DATA_UNDERRUN:
1355 if ((scsi_bufflen(cp) - residual_length) <
1356 cp->underflow) {
1357 printk(KERN_WARNING
1358 "scsi: Underflow detected - retrying "
1359 "command.\n");
1360 host_status = DID_ERROR;
1361 } else {
1362 scsi_set_resid(cp, residual_length);
1363 host_status = DID_OK;
1364 }
1365 break;
1366
1367 default:
1368 host_status = DID_ERROR;
1369 break;
1370 }
1371
1372#if DEBUG_QLA1280_INTR
1373 dprintk(1, "qla1280 ISP status: host status (%s) scsi status %x\n",
1374 reason[host_status], scsi_status);
1375#endif
1376
1377 LEAVE("qla1280_return_status");
1378
1379 return (scsi_status & 0xff) | (host_status << 16);
1380}
1381
1382/****************************************************************************/
1383/* QLogic ISP1280 Hardware Support Functions. */
1384/****************************************************************************/
1385
1386/*
1387 * qla1280_initialize_adapter
1388 * Initialize board.
1389 *
1390 * Input:
1391 * ha = adapter block pointer.
1392 *
1393 * Returns:
1394 * 0 = success
1395 */
1396static int
1397qla1280_initialize_adapter(struct scsi_qla_host *ha)
1398{
1399 struct device_reg __iomem *reg;
1400 int status;
1401 int bus;
1402 unsigned long flags;
1403
1404 ENTER("qla1280_initialize_adapter");
1405
1406 /* Clear adapter flags. */
1407 ha->flags.online = 0;
1408 ha->flags.disable_host_adapter = 0;
1409 ha->flags.reset_active = 0;
1410 ha->flags.abort_isp_active = 0;
1411
1412 /* TODO: implement support for the 1040 nvram format */
1413 if (IS_ISP1040(ha))
1414 driver_setup.no_nvram = 1;
1415
1416 dprintk(1, "Configure PCI space for adapter...\n");
1417
1418 reg = ha->iobase;
1419
1420 /* Insure mailbox registers are free. */
1421 WRT_REG_WORD(®->semaphore, 0);
1422 WRT_REG_WORD(®->host_cmd, HC_CLR_RISC_INT);
1423 WRT_REG_WORD(®->host_cmd, HC_CLR_HOST_INT);
1424 RD_REG_WORD(®->host_cmd);
1425
1426 if (qla1280_read_nvram(ha)) {
1427 dprintk(2, "qla1280_initialize_adapter: failed to read "
1428 "NVRAM\n");
1429 }
1430
1431 /*
1432 * It's necessary to grab the spin here as qla1280_mailbox_command
1433 * needs to be able to drop the lock unconditionally to wait
1434 * for completion.
1435 */
1436 spin_lock_irqsave(ha->host->host_lock, flags);
1437
1438 status = qla1280_load_firmware(ha);
1439 if (status) {
1440 printk(KERN_ERR "scsi(%li): initialize: pci probe failed!\n",
1441 ha->host_no);
1442 goto out;
1443 }
1444
1445 /* Setup adapter based on NVRAM parameters. */
1446 dprintk(1, "scsi(%ld): Configure NVRAM parameters\n", ha->host_no);
1447 qla1280_nvram_config(ha);
1448
1449 if (ha->flags.disable_host_adapter) {
1450 status = 1;
1451 goto out;
1452 }
1453
1454 status = qla1280_init_rings(ha);
1455 if (status)
1456 goto out;
1457
1458 /* Issue SCSI reset, if we can't reset twice then bus is dead */
1459 for (bus = 0; bus < ha->ports; bus++) {
1460 if (!ha->bus_settings[bus].disable_scsi_reset &&
1461 qla1280_bus_reset(ha, bus) &&
1462 qla1280_bus_reset(ha, bus))
1463 ha->bus_settings[bus].scsi_bus_dead = 1;
1464 }
1465
1466 ha->flags.online = 1;
1467 out:
1468 spin_unlock_irqrestore(ha->host->host_lock, flags);
1469
1470 if (status)
1471 dprintk(2, "qla1280_initialize_adapter: **** FAILED ****\n");
1472
1473 LEAVE("qla1280_initialize_adapter");
1474 return status;
1475}
1476
1477/*
1478 * qla1280_request_firmware
1479 * Acquire firmware for chip. Retain in memory
1480 * for error recovery.
1481 *
1482 * Input:
1483 * ha = adapter block pointer.
1484 *
1485 * Returns:
1486 * Pointer to firmware image or an error code
1487 * cast to pointer via ERR_PTR().
1488 */
1489static const struct firmware *
1490qla1280_request_firmware(struct scsi_qla_host *ha)
1491{
1492 const struct firmware *fw;
1493 int err;
1494 int index;
1495 char *fwname;
1496
1497 spin_unlock_irq(ha->host->host_lock);
1498 mutex_lock(&qla1280_firmware_mutex);
1499
1500 index = ql1280_board_tbl[ha->devnum].fw_index;
1501 fw = qla1280_fw_tbl[index].fw;
1502 if (fw)
1503 goto out;
1504
1505 fwname = qla1280_fw_tbl[index].fwname;
1506 err = request_firmware(&fw, fwname, &ha->pdev->dev);
1507
1508 if (err) {
1509 printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
1510 fwname, err);
1511 fw = ERR_PTR(err);
1512 goto unlock;
1513 }
1514 if ((fw->size % 2) || (fw->size < 6)) {
1515 printk(KERN_ERR "Invalid firmware length %zu in image \"%s\"\n",
1516 fw->size, fwname);
1517 release_firmware(fw);
1518 fw = ERR_PTR(-EINVAL);
1519 goto unlock;
1520 }
1521
1522 qla1280_fw_tbl[index].fw = fw;
1523
1524 out:
1525 ha->fwver1 = fw->data[0];
1526 ha->fwver2 = fw->data[1];
1527 ha->fwver3 = fw->data[2];
1528 unlock:
1529 mutex_unlock(&qla1280_firmware_mutex);
1530 spin_lock_irq(ha->host->host_lock);
1531 return fw;
1532}
1533
1534/*
1535 * Chip diagnostics
1536 * Test chip for proper operation.
1537 *
1538 * Input:
1539 * ha = adapter block pointer.
1540 *
1541 * Returns:
1542 * 0 = success.
1543 */
1544static int
1545qla1280_chip_diag(struct scsi_qla_host *ha)
1546{
1547 uint16_t mb[MAILBOX_REGISTER_COUNT];
1548 struct device_reg __iomem *reg = ha->iobase;
1549 int status = 0;
1550 int cnt;
1551 uint16_t data;
1552 dprintk(3, "qla1280_chip_diag: testing device at 0x%p \n", ®->id_l);
1553
1554 dprintk(1, "scsi(%ld): Verifying chip\n", ha->host_no);
1555
1556 /* Soft reset chip and wait for it to finish. */
1557 WRT_REG_WORD(®->ictrl, ISP_RESET);
1558
1559 /*
1560 * We can't do a traditional PCI write flush here by reading
1561 * back the register. The card will not respond once the reset
1562 * is in action and we end up with a machine check exception
1563 * instead. Nothing to do but wait and hope for the best.
1564 * A portable pci_write_flush(pdev) call would be very useful here.
1565 */
1566 udelay(20);
1567 data = qla1280_debounce_register(®->ictrl);
1568 /*
1569 * Yet another QLogic gem ;-(
1570 */
1571 for (cnt = 1000000; cnt && data & ISP_RESET; cnt--) {
1572 udelay(5);
1573 data = RD_REG_WORD(®->ictrl);
1574 }
1575
1576 if (!cnt)
1577 goto fail;
1578
1579 /* Reset register cleared by chip reset. */
1580 dprintk(3, "qla1280_chip_diag: reset register cleared by chip reset\n");
1581
1582 WRT_REG_WORD(®->cfg_1, 0);
1583
1584 /* Reset RISC and disable BIOS which
1585 allows RISC to execute out of RAM. */
1586 WRT_REG_WORD(®->host_cmd, HC_RESET_RISC |
1587 HC_RELEASE_RISC | HC_DISABLE_BIOS);
1588
1589 RD_REG_WORD(®->id_l); /* Flush PCI write */
1590 data = qla1280_debounce_register(®->mailbox0);
1591
1592 /*
1593 * I *LOVE* this code!
1594 */
1595 for (cnt = 1000000; cnt && data == MBS_BUSY; cnt--) {
1596 udelay(5);
1597 data = RD_REG_WORD(®->mailbox0);
1598 }
1599
1600 if (!cnt)
1601 goto fail;
1602
1603 /* Check product ID of chip */
1604 dprintk(3, "qla1280_chip_diag: Checking product ID of chip\n");
1605
1606 if (RD_REG_WORD(®->mailbox1) != PROD_ID_1 ||
1607 (RD_REG_WORD(®->mailbox2) != PROD_ID_2 &&
1608 RD_REG_WORD(®->mailbox2) != PROD_ID_2a) ||
1609 RD_REG_WORD(®->mailbox3) != PROD_ID_3 ||
1610 RD_REG_WORD(®->mailbox4) != PROD_ID_4) {
1611 printk(KERN_INFO "qla1280: Wrong product ID = "
1612 "0x%x,0x%x,0x%x,0x%x\n",
1613 RD_REG_WORD(®->mailbox1),
1614 RD_REG_WORD(®->mailbox2),
1615 RD_REG_WORD(®->mailbox3),
1616 RD_REG_WORD(®->mailbox4));
1617 goto fail;
1618 }
1619
1620 /*
1621 * Enable ints early!!!
1622 */
1623 qla1280_enable_intrs(ha);
1624
1625 dprintk(1, "qla1280_chip_diag: Checking mailboxes of chip\n");
1626 /* Wrap Incoming Mailboxes Test. */
1627 mb[0] = MBC_MAILBOX_REGISTER_TEST;
1628 mb[1] = 0xAAAA;
1629 mb[2] = 0x5555;
1630 mb[3] = 0xAA55;
1631 mb[4] = 0x55AA;
1632 mb[5] = 0xA5A5;
1633 mb[6] = 0x5A5A;
1634 mb[7] = 0x2525;
1635
1636 status = qla1280_mailbox_command(ha, 0xff, mb);
1637 if (status)
1638 goto fail;
1639
1640 if (mb[1] != 0xAAAA || mb[2] != 0x5555 || mb[3] != 0xAA55 ||
1641 mb[4] != 0x55AA || mb[5] != 0xA5A5 || mb[6] != 0x5A5A ||
1642 mb[7] != 0x2525) {
1643 printk(KERN_INFO "qla1280: Failed mbox check\n");
1644 goto fail;
1645 }
1646
1647 dprintk(3, "qla1280_chip_diag: exiting normally\n");
1648 return 0;
1649 fail:
1650 dprintk(2, "qla1280_chip_diag: **** FAILED ****\n");
1651 return status;
1652}
1653
1654static int
1655qla1280_load_firmware_pio(struct scsi_qla_host *ha)
1656{
1657 /* enter with host_lock acquired */
1658
1659 const struct firmware *fw;
1660 const __le16 *fw_data;
1661 uint16_t risc_address, risc_code_size;
1662 uint16_t mb[MAILBOX_REGISTER_COUNT], i;
1663 int err = 0;
1664
1665 fw = qla1280_request_firmware(ha);
1666 if (IS_ERR(fw))
1667 return PTR_ERR(fw);
1668
1669 fw_data = (const __le16 *)&fw->data[0];
1670 ha->fwstart = __le16_to_cpu(fw_data[2]);
1671
1672 /* Load RISC code. */
1673 risc_address = ha->fwstart;
1674 fw_data = (const __le16 *)&fw->data[6];
1675 risc_code_size = (fw->size - 6) / 2;
1676
1677 for (i = 0; i < risc_code_size; i++) {
1678 mb[0] = MBC_WRITE_RAM_WORD;
1679 mb[1] = risc_address + i;
1680 mb[2] = __le16_to_cpu(fw_data[i]);
1681
1682 err = qla1280_mailbox_command(ha, BIT_0 | BIT_1 | BIT_2, mb);
1683 if (err) {
1684 printk(KERN_ERR "scsi(%li): Failed to load firmware\n",
1685 ha->host_no);
1686 break;
1687 }
1688 }
1689
1690 return err;
1691}
1692
1693#ifdef QLA_64BIT_PTR
1694#define LOAD_CMD MBC_LOAD_RAM_A64_ROM
1695#define DUMP_CMD MBC_DUMP_RAM_A64_ROM
1696#define CMD_ARGS (BIT_7 | BIT_6 | BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0)
1697#else
1698#define LOAD_CMD MBC_LOAD_RAM
1699#define DUMP_CMD MBC_DUMP_RAM
1700#define CMD_ARGS (BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0)
1701#endif
1702
1703#define DUMP_IT_BACK 0 /* for debug of RISC loading */
1704static int
1705qla1280_load_firmware_dma(struct scsi_qla_host *ha)
1706{
1707 /* enter with host_lock acquired */
1708 const struct firmware *fw;
1709 const __le16 *fw_data;
1710 uint16_t risc_address, risc_code_size;
1711 uint16_t mb[MAILBOX_REGISTER_COUNT], cnt;
1712 int err = 0, num, i;
1713#if DUMP_IT_BACK
1714 uint8_t *sp, *tbuf;
1715 dma_addr_t p_tbuf;
1716
1717 tbuf = dma_alloc_coherent(&ha->pdev->dev, 8000, &p_tbuf, GFP_KERNEL);
1718 if (!tbuf)
1719 return -ENOMEM;
1720#endif
1721
1722 fw = qla1280_request_firmware(ha);
1723 if (IS_ERR(fw))
1724 return PTR_ERR(fw);
1725
1726 fw_data = (const __le16 *)&fw->data[0];
1727 ha->fwstart = __le16_to_cpu(fw_data[2]);
1728
1729 /* Load RISC code. */
1730 risc_address = ha->fwstart;
1731 fw_data = (const __le16 *)&fw->data[6];
1732 risc_code_size = (fw->size - 6) / 2;
1733
1734 dprintk(1, "%s: DMA RISC code (%i) words\n",
1735 __func__, risc_code_size);
1736
1737 num = 0;
1738 while (risc_code_size > 0) {
1739 int warn __attribute__((unused)) = 0;
1740
1741 cnt = 2000 >> 1;
1742
1743 if (cnt > risc_code_size)
1744 cnt = risc_code_size;
1745
1746 dprintk(2, "qla1280_setup_chip: loading risc @ =(0x%p),"
1747 "%d,%d(0x%x)\n",
1748 fw_data, cnt, num, risc_address);
1749 for(i = 0; i < cnt; i++)
1750 ((__le16 *)ha->request_ring)[i] = fw_data[i];
1751
1752 mb[0] = LOAD_CMD;
1753 mb[1] = risc_address;
1754 mb[4] = cnt;
1755 mb[3] = ha->request_dma & 0xffff;
1756 mb[2] = (ha->request_dma >> 16) & 0xffff;
1757 mb[7] = upper_32_bits(ha->request_dma) & 0xffff;
1758 mb[6] = upper_32_bits(ha->request_dma) >> 16;
1759 dprintk(2, "%s: op=%d 0x%p = 0x%4x,0x%4x,0x%4x,0x%4x\n",
1760 __func__, mb[0],
1761 (void *)(long)ha->request_dma,
1762 mb[6], mb[7], mb[2], mb[3]);
1763 err = qla1280_mailbox_command(ha, CMD_ARGS, mb);
1764 if (err) {
1765 printk(KERN_ERR "scsi(%li): Failed to load partial "
1766 "segment of f\n", ha->host_no);
1767 goto out;
1768 }
1769
1770#if DUMP_IT_BACK
1771 mb[0] = DUMP_CMD;
1772 mb[1] = risc_address;
1773 mb[4] = cnt;
1774 mb[3] = p_tbuf & 0xffff;
1775 mb[2] = (p_tbuf >> 16) & 0xffff;
1776 mb[7] = upper_32_bits(p_tbuf) & 0xffff;
1777 mb[6] = upper_32_bits(p_tbuf) >> 16;
1778
1779 err = qla1280_mailbox_command(ha, CMD_ARGS, mb);
1780 if (err) {
1781 printk(KERN_ERR
1782 "Failed to dump partial segment of f/w\n");
1783 goto out;
1784 }
1785 sp = (uint8_t *)ha->request_ring;
1786 for (i = 0; i < (cnt << 1); i++) {
1787 if (tbuf[i] != sp[i] && warn++ < 10) {
1788 printk(KERN_ERR "%s: FW compare error @ "
1789 "byte(0x%x) loop#=%x\n",
1790 __func__, i, num);
1791 printk(KERN_ERR "%s: FWbyte=%x "
1792 "FWfromChip=%x\n",
1793 __func__, sp[i], tbuf[i]);
1794 /*break; */
1795 }
1796 }
1797#endif
1798 risc_address += cnt;
1799 risc_code_size = risc_code_size - cnt;
1800 fw_data = fw_data + cnt;
1801 num++;
1802 }
1803
1804 out:
1805#if DUMP_IT_BACK
1806 dma_free_coherent(&ha->pdev->dev, 8000, tbuf, p_tbuf);
1807#endif
1808 return err;
1809}
1810
1811static int
1812qla1280_start_firmware(struct scsi_qla_host *ha)
1813{
1814 uint16_t mb[MAILBOX_REGISTER_COUNT];
1815 int err;
1816
1817 dprintk(1, "%s: Verifying checksum of loaded RISC code.\n",
1818 __func__);
1819
1820 /* Verify checksum of loaded RISC code. */
1821 mb[0] = MBC_VERIFY_CHECKSUM;
1822 /* mb[1] = ql12_risc_code_addr01; */
1823 mb[1] = ha->fwstart;
1824 err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
1825 if (err) {
1826 printk(KERN_ERR "scsi(%li): RISC checksum failed.\n", ha->host_no);
1827 return err;
1828 }
1829
1830 /* Start firmware execution. */
1831 dprintk(1, "%s: start firmware running.\n", __func__);
1832 mb[0] = MBC_EXECUTE_FIRMWARE;
1833 mb[1] = ha->fwstart;
1834 err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
1835 if (err) {
1836 printk(KERN_ERR "scsi(%li): Failed to start firmware\n",
1837 ha->host_no);
1838 }
1839
1840 return err;
1841}
1842
1843static int
1844qla1280_load_firmware(struct scsi_qla_host *ha)
1845{
1846 /* enter with host_lock taken */
1847 int err;
1848
1849 err = qla1280_chip_diag(ha);
1850 if (err)
1851 goto out;
1852 if (IS_ISP1040(ha))
1853 err = qla1280_load_firmware_pio(ha);
1854 else
1855 err = qla1280_load_firmware_dma(ha);
1856 if (err)
1857 goto out;
1858 err = qla1280_start_firmware(ha);
1859 out:
1860 return err;
1861}
1862
1863/*
1864 * Initialize rings
1865 *
1866 * Input:
1867 * ha = adapter block pointer.
1868 * ha->request_ring = request ring virtual address
1869 * ha->response_ring = response ring virtual address
1870 * ha->request_dma = request ring physical address
1871 * ha->response_dma = response ring physical address
1872 *
1873 * Returns:
1874 * 0 = success.
1875 */
1876static int
1877qla1280_init_rings(struct scsi_qla_host *ha)
1878{
1879 uint16_t mb[MAILBOX_REGISTER_COUNT];
1880 int status = 0;
1881
1882 ENTER("qla1280_init_rings");
1883
1884 /* Clear outstanding commands array. */
1885 memset(ha->outstanding_cmds, 0,
1886 sizeof(struct srb *) * MAX_OUTSTANDING_COMMANDS);
1887
1888 /* Initialize request queue. */
1889 ha->request_ring_ptr = ha->request_ring;
1890 ha->req_ring_index = 0;
1891 ha->req_q_cnt = REQUEST_ENTRY_CNT;
1892 /* mb[0] = MBC_INIT_REQUEST_QUEUE; */
1893 mb[0] = MBC_INIT_REQUEST_QUEUE_A64;
1894 mb[1] = REQUEST_ENTRY_CNT;
1895 mb[3] = ha->request_dma & 0xffff;
1896 mb[2] = (ha->request_dma >> 16) & 0xffff;
1897 mb[4] = 0;
1898 mb[7] = upper_32_bits(ha->request_dma) & 0xffff;
1899 mb[6] = upper_32_bits(ha->request_dma) >> 16;
1900 if (!(status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_4 |
1901 BIT_3 | BIT_2 | BIT_1 | BIT_0,
1902 &mb[0]))) {
1903 /* Initialize response queue. */
1904 ha->response_ring_ptr = ha->response_ring;
1905 ha->rsp_ring_index = 0;
1906 /* mb[0] = MBC_INIT_RESPONSE_QUEUE; */
1907 mb[0] = MBC_INIT_RESPONSE_QUEUE_A64;
1908 mb[1] = RESPONSE_ENTRY_CNT;
1909 mb[3] = ha->response_dma & 0xffff;
1910 mb[2] = (ha->response_dma >> 16) & 0xffff;
1911 mb[5] = 0;
1912 mb[7] = upper_32_bits(ha->response_dma) & 0xffff;
1913 mb[6] = upper_32_bits(ha->response_dma) >> 16;
1914 status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_5 |
1915 BIT_3 | BIT_2 | BIT_1 | BIT_0,
1916 &mb[0]);
1917 }
1918
1919 if (status)
1920 dprintk(2, "qla1280_init_rings: **** FAILED ****\n");
1921
1922 LEAVE("qla1280_init_rings");
1923 return status;
1924}
1925
1926static void
1927qla1280_print_settings(struct nvram *nv)
1928{
1929 dprintk(1, "qla1280 : initiator scsi id bus[0]=%d\n",
1930 nv->bus[0].config_1.initiator_id);
1931 dprintk(1, "qla1280 : initiator scsi id bus[1]=%d\n",
1932 nv->bus[1].config_1.initiator_id);
1933
1934 dprintk(1, "qla1280 : bus reset delay[0]=%d\n",
1935 nv->bus[0].bus_reset_delay);
1936 dprintk(1, "qla1280 : bus reset delay[1]=%d\n",
1937 nv->bus[1].bus_reset_delay);
1938
1939 dprintk(1, "qla1280 : retry count[0]=%d\n", nv->bus[0].retry_count);
1940 dprintk(1, "qla1280 : retry delay[0]=%d\n", nv->bus[0].retry_delay);
1941 dprintk(1, "qla1280 : retry count[1]=%d\n", nv->bus[1].retry_count);
1942 dprintk(1, "qla1280 : retry delay[1]=%d\n", nv->bus[1].retry_delay);
1943
1944 dprintk(1, "qla1280 : async data setup time[0]=%d\n",
1945 nv->bus[0].config_2.async_data_setup_time);
1946 dprintk(1, "qla1280 : async data setup time[1]=%d\n",
1947 nv->bus[1].config_2.async_data_setup_time);
1948
1949 dprintk(1, "qla1280 : req/ack active negation[0]=%d\n",
1950 nv->bus[0].config_2.req_ack_active_negation);
1951 dprintk(1, "qla1280 : req/ack active negation[1]=%d\n",
1952 nv->bus[1].config_2.req_ack_active_negation);
1953
1954 dprintk(1, "qla1280 : data line active negation[0]=%d\n",
1955 nv->bus[0].config_2.data_line_active_negation);
1956 dprintk(1, "qla1280 : data line active negation[1]=%d\n",
1957 nv->bus[1].config_2.data_line_active_negation);
1958
1959 dprintk(1, "qla1280 : disable loading risc code=%d\n",
1960 nv->cntr_flags_1.disable_loading_risc_code);
1961
1962 dprintk(1, "qla1280 : enable 64bit addressing=%d\n",
1963 nv->cntr_flags_1.enable_64bit_addressing);
1964
1965 dprintk(1, "qla1280 : selection timeout limit[0]=%d\n",
1966 nv->bus[0].selection_timeout);
1967 dprintk(1, "qla1280 : selection timeout limit[1]=%d\n",
1968 nv->bus[1].selection_timeout);
1969
1970 dprintk(1, "qla1280 : max queue depth[0]=%d\n",
1971 nv->bus[0].max_queue_depth);
1972 dprintk(1, "qla1280 : max queue depth[1]=%d\n",
1973 nv->bus[1].max_queue_depth);
1974}
1975
1976static void
1977qla1280_set_target_defaults(struct scsi_qla_host *ha, int bus, int target)
1978{
1979 struct nvram *nv = &ha->nvram;
1980
1981 nv->bus[bus].target[target].parameter.renegotiate_on_error = 1;
1982 nv->bus[bus].target[target].parameter.auto_request_sense = 1;
1983 nv->bus[bus].target[target].parameter.tag_queuing = 1;
1984 nv->bus[bus].target[target].parameter.enable_sync = 1;
1985#if 1 /* Some SCSI Processors do not seem to like this */
1986 nv->bus[bus].target[target].parameter.enable_wide = 1;
1987#endif
1988 nv->bus[bus].target[target].execution_throttle =
1989 nv->bus[bus].max_queue_depth - 1;
1990 nv->bus[bus].target[target].parameter.parity_checking = 1;
1991 nv->bus[bus].target[target].parameter.disconnect_allowed = 1;
1992
1993 if (IS_ISP1x160(ha)) {
1994 nv->bus[bus].target[target].flags.flags1x160.device_enable = 1;
1995 nv->bus[bus].target[target].flags.flags1x160.sync_offset = 0x0e;
1996 nv->bus[bus].target[target].sync_period = 9;
1997 nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1;
1998 nv->bus[bus].target[target].ppr_1x160.flags.ppr_options = 2;
1999 nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width = 1;
2000 } else {
2001 nv->bus[bus].target[target].flags.flags1x80.device_enable = 1;
2002 nv->bus[bus].target[target].flags.flags1x80.sync_offset = 12;
2003 nv->bus[bus].target[target].sync_period = 10;
2004 }
2005}
2006
2007static void
2008qla1280_set_defaults(struct scsi_qla_host *ha)
2009{
2010 struct nvram *nv = &ha->nvram;
2011 int bus, target;
2012
2013 dprintk(1, "Using defaults for NVRAM: \n");
2014 memset(nv, 0, sizeof(struct nvram));
2015
2016 /* nv->cntr_flags_1.disable_loading_risc_code = 1; */
2017 nv->firmware_feature.f.enable_fast_posting = 1;
2018 nv->firmware_feature.f.disable_synchronous_backoff = 1;
2019 nv->termination.scsi_bus_0_control = 3;
2020 nv->termination.scsi_bus_1_control = 3;
2021 nv->termination.auto_term_support = 1;
2022
2023 /*
2024 * Set default FIFO magic - What appropriate values would be here
2025 * is unknown. This is what I have found testing with 12160s.
2026 *
2027 * Now, I would love the magic decoder ring for this one, the
2028 * header file provided by QLogic seems to be bogus or incomplete
2029 * at best.
2030 */
2031 nv->isp_config.burst_enable = 1;
2032 if (IS_ISP1040(ha))
2033 nv->isp_config.fifo_threshold |= 3;
2034 else
2035 nv->isp_config.fifo_threshold |= 4;
2036
2037 if (IS_ISP1x160(ha))
2038 nv->isp_parameter = 0x01; /* fast memory enable */
2039
2040 for (bus = 0; bus < MAX_BUSES; bus++) {
2041 nv->bus[bus].config_1.initiator_id = 7;
2042 nv->bus[bus].config_2.req_ack_active_negation = 1;
2043 nv->bus[bus].config_2.data_line_active_negation = 1;
2044 nv->bus[bus].selection_timeout = 250;
2045 nv->bus[bus].max_queue_depth = 32;
2046
2047 if (IS_ISP1040(ha)) {
2048 nv->bus[bus].bus_reset_delay = 3;
2049 nv->bus[bus].config_2.async_data_setup_time = 6;
2050 nv->bus[bus].retry_delay = 1;
2051 } else {
2052 nv->bus[bus].bus_reset_delay = 5;
2053 nv->bus[bus].config_2.async_data_setup_time = 8;
2054 }
2055
2056 for (target = 0; target < MAX_TARGETS; target++)
2057 qla1280_set_target_defaults(ha, bus, target);
2058 }
2059}
2060
2061static int
2062qla1280_config_target(struct scsi_qla_host *ha, int bus, int target)
2063{
2064 struct nvram *nv = &ha->nvram;
2065 uint16_t mb[MAILBOX_REGISTER_COUNT];
2066 int status, lun;
2067 uint16_t flag;
2068
2069 /* Set Target Parameters. */
2070 mb[0] = MBC_SET_TARGET_PARAMETERS;
2071 mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
2072
2073 /*
2074 * Do not enable sync and ppr for the initial INQUIRY run. We
2075 * enable this later if we determine the target actually
2076 * supports it.
2077 */
2078 mb[2] = (TP_RENEGOTIATE | TP_AUTO_REQUEST_SENSE | TP_TAGGED_QUEUE
2079 | TP_WIDE | TP_PARITY | TP_DISCONNECT);
2080
2081 if (IS_ISP1x160(ha))
2082 mb[3] = nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8;
2083 else
2084 mb[3] = nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8;
2085 mb[3] |= nv->bus[bus].target[target].sync_period;
2086 status = qla1280_mailbox_command(ha, 0x0f, mb);
2087
2088 /* Save Tag queuing enable flag. */
2089 flag = (BIT_0 << target);
2090 if (nv->bus[bus].target[target].parameter.tag_queuing)
2091 ha->bus_settings[bus].qtag_enables |= flag;
2092
2093 /* Save Device enable flag. */
2094 if (IS_ISP1x160(ha)) {
2095 if (nv->bus[bus].target[target].flags.flags1x160.device_enable)
2096 ha->bus_settings[bus].device_enables |= flag;
2097 ha->bus_settings[bus].lun_disables |= 0;
2098 } else {
2099 if (nv->bus[bus].target[target].flags.flags1x80.device_enable)
2100 ha->bus_settings[bus].device_enables |= flag;
2101 /* Save LUN disable flag. */
2102 if (nv->bus[bus].target[target].flags.flags1x80.lun_disable)
2103 ha->bus_settings[bus].lun_disables |= flag;
2104 }
2105
2106 /* Set Device Queue Parameters. */
2107 for (lun = 0; lun < MAX_LUNS; lun++) {
2108 mb[0] = MBC_SET_DEVICE_QUEUE;
2109 mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
2110 mb[1] |= lun;
2111 mb[2] = nv->bus[bus].max_queue_depth;
2112 mb[3] = nv->bus[bus].target[target].execution_throttle;
2113 status |= qla1280_mailbox_command(ha, 0x0f, mb);
2114 }
2115
2116 return status;
2117}
2118
2119static int
2120qla1280_config_bus(struct scsi_qla_host *ha, int bus)
2121{
2122 struct nvram *nv = &ha->nvram;
2123 uint16_t mb[MAILBOX_REGISTER_COUNT];
2124 int target, status;
2125
2126 /* SCSI Reset Disable. */
2127 ha->bus_settings[bus].disable_scsi_reset =
2128 nv->bus[bus].config_1.scsi_reset_disable;
2129
2130 /* Initiator ID. */
2131 ha->bus_settings[bus].id = nv->bus[bus].config_1.initiator_id;
2132 mb[0] = MBC_SET_INITIATOR_ID;
2133 mb[1] = bus ? ha->bus_settings[bus].id | BIT_7 :
2134 ha->bus_settings[bus].id;
2135 status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
2136
2137 /* Reset Delay. */
2138 ha->bus_settings[bus].bus_reset_delay =
2139 nv->bus[bus].bus_reset_delay;
2140
2141 /* Command queue depth per device. */
2142 ha->bus_settings[bus].hiwat = nv->bus[bus].max_queue_depth - 1;
2143
2144 /* Set target parameters. */
2145 for (target = 0; target < MAX_TARGETS; target++)
2146 status |= qla1280_config_target(ha, bus, target);
2147
2148 return status;
2149}
2150
2151static int
2152qla1280_nvram_config(struct scsi_qla_host *ha)
2153{
2154 struct device_reg __iomem *reg = ha->iobase;
2155 struct nvram *nv = &ha->nvram;
2156 int bus, target, status = 0;
2157 uint16_t mb[MAILBOX_REGISTER_COUNT];
2158
2159 ENTER("qla1280_nvram_config");
2160
2161 if (ha->nvram_valid) {
2162 /* Always force AUTO sense for LINUX SCSI */
2163 for (bus = 0; bus < MAX_BUSES; bus++)
2164 for (target = 0; target < MAX_TARGETS; target++) {
2165 nv->bus[bus].target[target].parameter.
2166 auto_request_sense = 1;
2167 }
2168 } else {
2169 qla1280_set_defaults(ha);
2170 }
2171
2172 qla1280_print_settings(nv);
2173
2174 /* Disable RISC load of firmware. */
2175 ha->flags.disable_risc_code_load =
2176 nv->cntr_flags_1.disable_loading_risc_code;
2177
2178 if (IS_ISP1040(ha)) {
2179 uint16_t hwrev, cfg1, cdma_conf;
2180
2181 hwrev = RD_REG_WORD(®->cfg_0) & ISP_CFG0_HWMSK;
2182
2183 cfg1 = RD_REG_WORD(®->cfg_1) & ~(BIT_4 | BIT_5 | BIT_6);
2184 cdma_conf = RD_REG_WORD(®->cdma_cfg);
2185
2186 /* Busted fifo, says mjacob. */
2187 if (hwrev != ISP_CFG0_1040A)
2188 cfg1 |= nv->isp_config.fifo_threshold << 4;
2189
2190 cfg1 |= nv->isp_config.burst_enable << 2;
2191 WRT_REG_WORD(®->cfg_1, cfg1);
2192
2193 WRT_REG_WORD(®->cdma_cfg, cdma_conf | CDMA_CONF_BENAB);
2194 WRT_REG_WORD(®->ddma_cfg, cdma_conf | DDMA_CONF_BENAB);
2195 } else {
2196 uint16_t cfg1, term;
2197
2198 /* Set ISP hardware DMA burst */
2199 cfg1 = nv->isp_config.fifo_threshold << 4;
2200 cfg1 |= nv->isp_config.burst_enable << 2;
2201 /* Enable DMA arbitration on dual channel controllers */
2202 if (ha->ports > 1)
2203 cfg1 |= BIT_13;
2204 WRT_REG_WORD(®->cfg_1, cfg1);
2205
2206 /* Set SCSI termination. */
2207 WRT_REG_WORD(®->gpio_enable,
2208 BIT_7 | BIT_3 | BIT_2 | BIT_1 | BIT_0);
2209 term = nv->termination.scsi_bus_1_control;
2210 term |= nv->termination.scsi_bus_0_control << 2;
2211 term |= nv->termination.auto_term_support << 7;
2212 RD_REG_WORD(®->id_l); /* Flush PCI write */
2213 WRT_REG_WORD(®->gpio_data, term);
2214 }
2215 RD_REG_WORD(®->id_l); /* Flush PCI write */
2216
2217 /* ISP parameter word. */
2218 mb[0] = MBC_SET_SYSTEM_PARAMETER;
2219 mb[1] = nv->isp_parameter;
2220 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
2221
2222 if (IS_ISP1x40(ha)) {
2223 /* clock rate - for qla1240 and older, only */
2224 mb[0] = MBC_SET_CLOCK_RATE;
2225 mb[1] = 40;
2226 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
2227 }
2228
2229 /* Firmware feature word. */
2230 mb[0] = MBC_SET_FIRMWARE_FEATURES;
2231 mb[1] = nv->firmware_feature.f.enable_fast_posting;
2232 mb[1] |= nv->firmware_feature.f.report_lvd_bus_transition << 1;
2233 mb[1] |= nv->firmware_feature.f.disable_synchronous_backoff << 5;
2234 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
2235
2236 /* Retry count and delay. */
2237 mb[0] = MBC_SET_RETRY_COUNT;
2238 mb[1] = nv->bus[0].retry_count;
2239 mb[2] = nv->bus[0].retry_delay;
2240 mb[6] = nv->bus[1].retry_count;
2241 mb[7] = nv->bus[1].retry_delay;
2242 status |= qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_2 |
2243 BIT_1 | BIT_0, &mb[0]);
2244
2245 /* ASYNC data setup time. */
2246 mb[0] = MBC_SET_ASYNC_DATA_SETUP;
2247 mb[1] = nv->bus[0].config_2.async_data_setup_time;
2248 mb[2] = nv->bus[1].config_2.async_data_setup_time;
2249 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2250
2251 /* Active negation states. */
2252 mb[0] = MBC_SET_ACTIVE_NEGATION;
2253 mb[1] = 0;
2254 if (nv->bus[0].config_2.req_ack_active_negation)
2255 mb[1] |= BIT_5;
2256 if (nv->bus[0].config_2.data_line_active_negation)
2257 mb[1] |= BIT_4;
2258 mb[2] = 0;
2259 if (nv->bus[1].config_2.req_ack_active_negation)
2260 mb[2] |= BIT_5;
2261 if (nv->bus[1].config_2.data_line_active_negation)
2262 mb[2] |= BIT_4;
2263 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
2264
2265 mb[0] = MBC_SET_DATA_OVERRUN_RECOVERY;
2266 mb[1] = 2; /* Reset SCSI bus and return all outstanding IO */
2267 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
2268
2269 /* thingy */
2270 mb[0] = MBC_SET_PCI_CONTROL;
2271 mb[1] = BIT_1; /* Data DMA Channel Burst Enable */
2272 mb[2] = BIT_1; /* Command DMA Channel Burst Enable */
2273 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
2274
2275 mb[0] = MBC_SET_TAG_AGE_LIMIT;
2276 mb[1] = 8;
2277 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
2278
2279 /* Selection timeout. */
2280 mb[0] = MBC_SET_SELECTION_TIMEOUT;
2281 mb[1] = nv->bus[0].selection_timeout;
2282 mb[2] = nv->bus[1].selection_timeout;
2283 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
2284
2285 for (bus = 0; bus < ha->ports; bus++)
2286 status |= qla1280_config_bus(ha, bus);
2287
2288 if (status)
2289 dprintk(2, "qla1280_nvram_config: **** FAILED ****\n");
2290
2291 LEAVE("qla1280_nvram_config");
2292 return status;
2293}
2294
2295/*
2296 * Get NVRAM data word
2297 * Calculates word position in NVRAM and calls request routine to
2298 * get the word from NVRAM.
2299 *
2300 * Input:
2301 * ha = adapter block pointer.
2302 * address = NVRAM word address.
2303 *
2304 * Returns:
2305 * data word.
2306 */
2307static uint16_t
2308qla1280_get_nvram_word(struct scsi_qla_host *ha, uint32_t address)
2309{
2310 uint32_t nv_cmd;
2311 uint16_t data;
2312
2313 nv_cmd = address << 16;
2314 nv_cmd |= NV_READ_OP;
2315
2316 data = le16_to_cpu(qla1280_nvram_request(ha, nv_cmd));
2317
2318 dprintk(8, "qla1280_get_nvram_word: exiting normally NVRAM data = "
2319 "0x%x", data);
2320
2321 return data;
2322}
2323
2324/*
2325 * NVRAM request
2326 * Sends read command to NVRAM and gets data from NVRAM.
2327 *
2328 * Input:
2329 * ha = adapter block pointer.
2330 * nv_cmd = Bit 26 = start bit
2331 * Bit 25, 24 = opcode
2332 * Bit 23-16 = address
2333 * Bit 15-0 = write data
2334 *
2335 * Returns:
2336 * data word.
2337 */
2338static uint16_t
2339qla1280_nvram_request(struct scsi_qla_host *ha, uint32_t nv_cmd)
2340{
2341 struct device_reg __iomem *reg = ha->iobase;
2342 int cnt;
2343 uint16_t data = 0;
2344 uint16_t reg_data;
2345
2346 /* Send command to NVRAM. */
2347
2348 nv_cmd <<= 5;
2349 for (cnt = 0; cnt < 11; cnt++) {
2350 if (nv_cmd & BIT_31)
2351 qla1280_nv_write(ha, NV_DATA_OUT);
2352 else
2353 qla1280_nv_write(ha, 0);
2354 nv_cmd <<= 1;
2355 }
2356
2357 /* Read data from NVRAM. */
2358
2359 for (cnt = 0; cnt < 16; cnt++) {
2360 WRT_REG_WORD(®->nvram, (NV_SELECT | NV_CLOCK));
2361 RD_REG_WORD(®->id_l); /* Flush PCI write */
2362 NVRAM_DELAY();
2363 data <<= 1;
2364 reg_data = RD_REG_WORD(®->nvram);
2365 if (reg_data & NV_DATA_IN)
2366 data |= BIT_0;
2367 WRT_REG_WORD(®->nvram, NV_SELECT);
2368 RD_REG_WORD(®->id_l); /* Flush PCI write */
2369 NVRAM_DELAY();
2370 }
2371
2372 /* Deselect chip. */
2373
2374 WRT_REG_WORD(®->nvram, NV_DESELECT);
2375 RD_REG_WORD(®->id_l); /* Flush PCI write */
2376 NVRAM_DELAY();
2377
2378 return data;
2379}
2380
2381static void
2382qla1280_nv_write(struct scsi_qla_host *ha, uint16_t data)
2383{
2384 struct device_reg __iomem *reg = ha->iobase;
2385
2386 WRT_REG_WORD(®->nvram, data | NV_SELECT);
2387 RD_REG_WORD(®->id_l); /* Flush PCI write */
2388 NVRAM_DELAY();
2389 WRT_REG_WORD(®->nvram, data | NV_SELECT | NV_CLOCK);
2390 RD_REG_WORD(®->id_l); /* Flush PCI write */
2391 NVRAM_DELAY();
2392 WRT_REG_WORD(®->nvram, data | NV_SELECT);
2393 RD_REG_WORD(®->id_l); /* Flush PCI write */
2394 NVRAM_DELAY();
2395}
2396
2397/*
2398 * Mailbox Command
2399 * Issue mailbox command and waits for completion.
2400 *
2401 * Input:
2402 * ha = adapter block pointer.
2403 * mr = mailbox registers to load.
2404 * mb = data pointer for mailbox registers.
2405 *
2406 * Output:
2407 * mb[MAILBOX_REGISTER_COUNT] = returned mailbox data.
2408 *
2409 * Returns:
2410 * 0 = success
2411 */
2412static int
2413qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb)
2414{
2415 struct device_reg __iomem *reg = ha->iobase;
2416 int status = 0;
2417 int cnt;
2418 uint16_t *optr, *iptr;
2419 uint16_t __iomem *mptr;
2420 DECLARE_COMPLETION_ONSTACK(wait);
2421
2422 ENTER("qla1280_mailbox_command");
2423
2424 if (ha->mailbox_wait) {
2425 printk(KERN_ERR "Warning mailbox wait already in use!\n");
2426 }
2427 ha->mailbox_wait = &wait;
2428
2429 /*
2430 * We really should start out by verifying that the mailbox is
2431 * available before starting sending the command data
2432 */
2433 /* Load mailbox registers. */
2434 mptr = (uint16_t __iomem *) ®->mailbox0;
2435 iptr = mb;
2436 for (cnt = 0; cnt < MAILBOX_REGISTER_COUNT; cnt++) {
2437 if (mr & BIT_0) {
2438 WRT_REG_WORD(mptr, (*iptr));
2439 }
2440
2441 mr >>= 1;
2442 mptr++;
2443 iptr++;
2444 }
2445
2446 /* Issue set host interrupt command. */
2447
2448 /* set up a timer just in case we're really jammed */
2449 timer_setup(&ha->mailbox_timer, qla1280_mailbox_timeout, 0);
2450 mod_timer(&ha->mailbox_timer, jiffies + 20 * HZ);
2451
2452 spin_unlock_irq(ha->host->host_lock);
2453 WRT_REG_WORD(®->host_cmd, HC_SET_HOST_INT);
2454 qla1280_debounce_register(®->istatus);
2455
2456 wait_for_completion(&wait);
2457 del_timer_sync(&ha->mailbox_timer);
2458
2459 spin_lock_irq(ha->host->host_lock);
2460
2461 ha->mailbox_wait = NULL;
2462
2463 /* Check for mailbox command timeout. */
2464 if (ha->mailbox_out[0] != MBS_CMD_CMP) {
2465 printk(KERN_WARNING "qla1280_mailbox_command: Command failed, "
2466 "mailbox0 = 0x%04x, mailbox_out0 = 0x%04x, istatus = "
2467 "0x%04x\n",
2468 mb[0], ha->mailbox_out[0], RD_REG_WORD(®->istatus));
2469 printk(KERN_WARNING "m0 %04x, m1 %04x, m2 %04x, m3 %04x\n",
2470 RD_REG_WORD(®->mailbox0), RD_REG_WORD(®->mailbox1),
2471 RD_REG_WORD(®->mailbox2), RD_REG_WORD(®->mailbox3));
2472 printk(KERN_WARNING "m4 %04x, m5 %04x, m6 %04x, m7 %04x\n",
2473 RD_REG_WORD(®->mailbox4), RD_REG_WORD(®->mailbox5),
2474 RD_REG_WORD(®->mailbox6), RD_REG_WORD(®->mailbox7));
2475 status = 1;
2476 }
2477
2478 /* Load return mailbox registers. */
2479 optr = mb;
2480 iptr = (uint16_t *) &ha->mailbox_out[0];
2481 mr = MAILBOX_REGISTER_COUNT;
2482 memcpy(optr, iptr, MAILBOX_REGISTER_COUNT * sizeof(uint16_t));
2483
2484 if (ha->flags.reset_marker)
2485 qla1280_rst_aen(ha);
2486
2487 if (status)
2488 dprintk(2, "qla1280_mailbox_command: **** FAILED, mailbox0 = "
2489 "0x%x ****\n", mb[0]);
2490
2491 LEAVE("qla1280_mailbox_command");
2492 return status;
2493}
2494
2495/*
2496 * qla1280_poll
2497 * Polls ISP for interrupts.
2498 *
2499 * Input:
2500 * ha = adapter block pointer.
2501 */
2502static void
2503qla1280_poll(struct scsi_qla_host *ha)
2504{
2505 struct device_reg __iomem *reg = ha->iobase;
2506 uint16_t data;
2507 LIST_HEAD(done_q);
2508
2509 /* ENTER("qla1280_poll"); */
2510
2511 /* Check for pending interrupts. */
2512 data = RD_REG_WORD(®->istatus);
2513 if (data & RISC_INT)
2514 qla1280_isr(ha, &done_q);
2515
2516 if (!ha->mailbox_wait) {
2517 if (ha->flags.reset_marker)
2518 qla1280_rst_aen(ha);
2519 }
2520
2521 if (!list_empty(&done_q))
2522 qla1280_done(ha);
2523
2524 /* LEAVE("qla1280_poll"); */
2525}
2526
2527/*
2528 * qla1280_bus_reset
2529 * Issue SCSI bus reset.
2530 *
2531 * Input:
2532 * ha = adapter block pointer.
2533 * bus = SCSI bus number.
2534 *
2535 * Returns:
2536 * 0 = success
2537 */
2538static int
2539qla1280_bus_reset(struct scsi_qla_host *ha, int bus)
2540{
2541 uint16_t mb[MAILBOX_REGISTER_COUNT];
2542 uint16_t reset_delay;
2543 int status;
2544
2545 dprintk(3, "qla1280_bus_reset: entered\n");
2546
2547 if (qla1280_verbose)
2548 printk(KERN_INFO "scsi(%li:%i): Resetting SCSI BUS\n",
2549 ha->host_no, bus);
2550
2551 reset_delay = ha->bus_settings[bus].bus_reset_delay;
2552 mb[0] = MBC_BUS_RESET;
2553 mb[1] = reset_delay;
2554 mb[2] = (uint16_t) bus;
2555 status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2556
2557 if (status) {
2558 if (ha->bus_settings[bus].failed_reset_count > 2)
2559 ha->bus_settings[bus].scsi_bus_dead = 1;
2560 ha->bus_settings[bus].failed_reset_count++;
2561 } else {
2562 spin_unlock_irq(ha->host->host_lock);
2563 ssleep(reset_delay);
2564 spin_lock_irq(ha->host->host_lock);
2565
2566 ha->bus_settings[bus].scsi_bus_dead = 0;
2567 ha->bus_settings[bus].failed_reset_count = 0;
2568 ha->bus_settings[bus].reset_marker = 0;
2569 /* Issue marker command. */
2570 qla1280_marker(ha, bus, 0, 0, MK_SYNC_ALL);
2571 }
2572
2573 /*
2574 * We should probably call qla1280_set_target_parameters()
2575 * here as well for all devices on the bus.
2576 */
2577
2578 if (status)
2579 dprintk(2, "qla1280_bus_reset: **** FAILED ****\n");
2580 else
2581 dprintk(3, "qla1280_bus_reset: exiting normally\n");
2582
2583 return status;
2584}
2585
2586/*
2587 * qla1280_device_reset
2588 * Issue bus device reset message to the target.
2589 *
2590 * Input:
2591 * ha = adapter block pointer.
2592 * bus = SCSI BUS number.
2593 * target = SCSI ID.
2594 *
2595 * Returns:
2596 * 0 = success
2597 */
2598static int
2599qla1280_device_reset(struct scsi_qla_host *ha, int bus, int target)
2600{
2601 uint16_t mb[MAILBOX_REGISTER_COUNT];
2602 int status;
2603
2604 ENTER("qla1280_device_reset");
2605
2606 mb[0] = MBC_ABORT_TARGET;
2607 mb[1] = (bus ? (target | BIT_7) : target) << 8;
2608 mb[2] = 1;
2609 status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2610
2611 /* Issue marker command. */
2612 qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
2613
2614 if (status)
2615 dprintk(2, "qla1280_device_reset: **** FAILED ****\n");
2616
2617 LEAVE("qla1280_device_reset");
2618 return status;
2619}
2620
2621/*
2622 * qla1280_abort_command
2623 * Abort command aborts a specified IOCB.
2624 *
2625 * Input:
2626 * ha = adapter block pointer.
2627 * sp = SB structure pointer.
2628 *
2629 * Returns:
2630 * 0 = success
2631 */
2632static int
2633qla1280_abort_command(struct scsi_qla_host *ha, struct srb * sp, int handle)
2634{
2635 uint16_t mb[MAILBOX_REGISTER_COUNT];
2636 unsigned int bus, target, lun;
2637 int status;
2638
2639 ENTER("qla1280_abort_command");
2640
2641 bus = SCSI_BUS_32(sp->cmd);
2642 target = SCSI_TCN_32(sp->cmd);
2643 lun = SCSI_LUN_32(sp->cmd);
2644
2645 sp->flags |= SRB_ABORT_PENDING;
2646
2647 mb[0] = MBC_ABORT_COMMAND;
2648 mb[1] = (bus ? target | BIT_7 : target) << 8 | lun;
2649 mb[2] = handle >> 16;
2650 mb[3] = handle & 0xffff;
2651 status = qla1280_mailbox_command(ha, 0x0f, &mb[0]);
2652
2653 if (status) {
2654 dprintk(2, "qla1280_abort_command: **** FAILED ****\n");
2655 sp->flags &= ~SRB_ABORT_PENDING;
2656 }
2657
2658
2659 LEAVE("qla1280_abort_command");
2660 return status;
2661}
2662
2663/*
2664 * qla1280_reset_adapter
2665 * Reset adapter.
2666 *
2667 * Input:
2668 * ha = adapter block pointer.
2669 */
2670static void
2671qla1280_reset_adapter(struct scsi_qla_host *ha)
2672{
2673 struct device_reg __iomem *reg = ha->iobase;
2674
2675 ENTER("qla1280_reset_adapter");
2676
2677 /* Disable ISP chip */
2678 ha->flags.online = 0;
2679 WRT_REG_WORD(®->ictrl, ISP_RESET);
2680 WRT_REG_WORD(®->host_cmd,
2681 HC_RESET_RISC | HC_RELEASE_RISC | HC_DISABLE_BIOS);
2682 RD_REG_WORD(®->id_l); /* Flush PCI write */
2683
2684 LEAVE("qla1280_reset_adapter");
2685}
2686
2687/*
2688 * Issue marker command.
2689 * Function issues marker IOCB.
2690 *
2691 * Input:
2692 * ha = adapter block pointer.
2693 * bus = SCSI BUS number
2694 * id = SCSI ID
2695 * lun = SCSI LUN
2696 * type = marker modifier
2697 */
2698static void
2699qla1280_marker(struct scsi_qla_host *ha, int bus, int id, int lun, u8 type)
2700{
2701 struct mrk_entry *pkt;
2702
2703 ENTER("qla1280_marker");
2704
2705 /* Get request packet. */
2706 if ((pkt = (struct mrk_entry *) qla1280_req_pkt(ha))) {
2707 pkt->entry_type = MARKER_TYPE;
2708 pkt->lun = (uint8_t) lun;
2709 pkt->target = (uint8_t) (bus ? (id | BIT_7) : id);
2710 pkt->modifier = type;
2711 pkt->entry_status = 0;
2712
2713 /* Issue command to ISP */
2714 qla1280_isp_cmd(ha);
2715 }
2716
2717 LEAVE("qla1280_marker");
2718}
2719
2720
2721/*
2722 * qla1280_64bit_start_scsi
2723 * The start SCSI is responsible for building request packets on
2724 * request ring and modifying ISP input pointer.
2725 *
2726 * Input:
2727 * ha = adapter block pointer.
2728 * sp = SB structure pointer.
2729 *
2730 * Returns:
2731 * 0 = success, was able to issue command.
2732 */
2733#ifdef QLA_64BIT_PTR
2734static int
2735qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
2736{
2737 struct device_reg __iomem *reg = ha->iobase;
2738 struct scsi_cmnd *cmd = sp->cmd;
2739 cmd_a64_entry_t *pkt;
2740 __le32 *dword_ptr;
2741 dma_addr_t dma_handle;
2742 int status = 0;
2743 int cnt;
2744 int req_cnt;
2745 int seg_cnt;
2746 u8 dir;
2747
2748 ENTER("qla1280_64bit_start_scsi:");
2749
2750 /* Calculate number of entries and segments required. */
2751 req_cnt = 1;
2752 seg_cnt = scsi_dma_map(cmd);
2753 if (seg_cnt > 0) {
2754 if (seg_cnt > 2) {
2755 req_cnt += (seg_cnt - 2) / 5;
2756 if ((seg_cnt - 2) % 5)
2757 req_cnt++;
2758 }
2759 } else if (seg_cnt < 0) {
2760 status = 1;
2761 goto out;
2762 }
2763
2764 if ((req_cnt + 2) >= ha->req_q_cnt) {
2765 /* Calculate number of free request entries. */
2766 cnt = RD_REG_WORD(®->mailbox4);
2767 if (ha->req_ring_index < cnt)
2768 ha->req_q_cnt = cnt - ha->req_ring_index;
2769 else
2770 ha->req_q_cnt =
2771 REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
2772 }
2773
2774 dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x\n",
2775 ha->req_q_cnt, seg_cnt);
2776
2777 /* If room for request in request ring. */
2778 if ((req_cnt + 2) >= ha->req_q_cnt) {
2779 status = SCSI_MLQUEUE_HOST_BUSY;
2780 dprintk(2, "qla1280_start_scsi: in-ptr=0x%x req_q_cnt="
2781 "0x%xreq_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt,
2782 req_cnt);
2783 goto out;
2784 }
2785
2786 /* Check for room in outstanding command list. */
2787 for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&
2788 ha->outstanding_cmds[cnt] != NULL; cnt++);
2789
2790 if (cnt >= MAX_OUTSTANDING_COMMANDS) {
2791 status = SCSI_MLQUEUE_HOST_BUSY;
2792 dprintk(2, "qla1280_start_scsi: NO ROOM IN "
2793 "OUTSTANDING ARRAY, req_q_cnt=0x%x", ha->req_q_cnt);
2794 goto out;
2795 }
2796
2797 ha->outstanding_cmds[cnt] = sp;
2798 ha->req_q_cnt -= req_cnt;
2799 CMD_HANDLE(sp->cmd) = (unsigned char *)(unsigned long)(cnt + 1);
2800
2801 dprintk(2, "start: cmd=%p sp=%p CDB=%xm, handle %lx\n", cmd, sp,
2802 cmd->cmnd[0], (long)CMD_HANDLE(sp->cmd));
2803 dprintk(2, " bus %i, target %i, lun %i\n",
2804 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
2805 qla1280_dump_buffer(2, cmd->cmnd, MAX_COMMAND_SIZE);
2806
2807 /*
2808 * Build command packet.
2809 */
2810 pkt = (cmd_a64_entry_t *) ha->request_ring_ptr;
2811
2812 pkt->entry_type = COMMAND_A64_TYPE;
2813 pkt->entry_count = (uint8_t) req_cnt;
2814 pkt->sys_define = (uint8_t) ha->req_ring_index;
2815 pkt->entry_status = 0;
2816 pkt->handle = cpu_to_le32(cnt);
2817
2818 /* Zero out remaining portion of packet. */
2819 memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8));
2820
2821 /* Set ISP command timeout. */
2822 pkt->timeout = cpu_to_le16(scsi_cmd_to_rq(cmd)->timeout / HZ);
2823
2824 /* Set device target ID and LUN */
2825 pkt->lun = SCSI_LUN_32(cmd);
2826 pkt->target = SCSI_BUS_32(cmd) ?
2827 (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
2828
2829 /* Enable simple tag queuing if device supports it. */
2830 if (cmd->device->simple_tags)
2831 pkt->control_flags |= cpu_to_le16(BIT_3);
2832
2833 /* Load SCSI command packet. */
2834 pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
2835 memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));
2836 /* dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
2837
2838 /* Set transfer direction. */
2839 dir = qla1280_data_direction(cmd);
2840 pkt->control_flags |= cpu_to_le16(dir);
2841
2842 /* Set total data segment count. */
2843 pkt->dseg_count = cpu_to_le16(seg_cnt);
2844
2845 /*
2846 * Load data segments.
2847 */
2848 if (seg_cnt) { /* If data transfer. */
2849 struct scatterlist *sg, *s;
2850 int remseg = seg_cnt;
2851
2852 sg = scsi_sglist(cmd);
2853
2854 /* Setup packet address segment pointer. */
2855 dword_ptr = (u32 *)&pkt->dseg_0_address;
2856
2857 /* Load command entry data segments. */
2858 for_each_sg(sg, s, seg_cnt, cnt) {
2859 if (cnt == 2)
2860 break;
2861
2862 dma_handle = sg_dma_address(s);
2863 *dword_ptr++ =
2864 cpu_to_le32(lower_32_bits(dma_handle));
2865 *dword_ptr++ =
2866 cpu_to_le32(upper_32_bits(dma_handle));
2867 *dword_ptr++ = cpu_to_le32(sg_dma_len(s));
2868 dprintk(3, "S/G Segment phys_addr=%x %x, len=0x%x\n",
2869 cpu_to_le32(upper_32_bits(dma_handle)),
2870 cpu_to_le32(lower_32_bits(dma_handle)),
2871 cpu_to_le32(sg_dma_len(sg_next(s))));
2872 remseg--;
2873 }
2874 dprintk(5, "qla1280_64bit_start_scsi: Scatter/gather "
2875 "command packet data - b %i, t %i, l %i \n",
2876 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
2877 SCSI_LUN_32(cmd));
2878 qla1280_dump_buffer(5, (char *)pkt,
2879 REQUEST_ENTRY_SIZE);
2880
2881 /*
2882 * Build continuation packets.
2883 */
2884 dprintk(3, "S/G Building Continuation...seg_cnt=0x%x "
2885 "remains\n", seg_cnt);
2886
2887 while (remseg > 0) {
2888 /* Update sg start */
2889 sg = s;
2890 /* Adjust ring index. */
2891 ha->req_ring_index++;
2892 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
2893 ha->req_ring_index = 0;
2894 ha->request_ring_ptr =
2895 ha->request_ring;
2896 } else
2897 ha->request_ring_ptr++;
2898
2899 pkt = (cmd_a64_entry_t *)ha->request_ring_ptr;
2900
2901 /* Zero out packet. */
2902 memset(pkt, 0, REQUEST_ENTRY_SIZE);
2903
2904 /* Load packet defaults. */
2905 ((struct cont_a64_entry *) pkt)->entry_type =
2906 CONTINUE_A64_TYPE;
2907 ((struct cont_a64_entry *) pkt)->entry_count = 1;
2908 ((struct cont_a64_entry *) pkt)->sys_define =
2909 (uint8_t)ha->req_ring_index;
2910 /* Setup packet address segment pointer. */
2911 dword_ptr =
2912 (u32 *)&((struct cont_a64_entry *) pkt)->dseg_0_address;
2913
2914 /* Load continuation entry data segments. */
2915 for_each_sg(sg, s, remseg, cnt) {
2916 if (cnt == 5)
2917 break;
2918 dma_handle = sg_dma_address(s);
2919 *dword_ptr++ =
2920 cpu_to_le32(lower_32_bits(dma_handle));
2921 *dword_ptr++ =
2922 cpu_to_le32(upper_32_bits(dma_handle));
2923 *dword_ptr++ =
2924 cpu_to_le32(sg_dma_len(s));
2925 dprintk(3, "S/G Segment Cont. phys_addr=%x %x, len=0x%x\n",
2926 cpu_to_le32(upper_32_bits(dma_handle)),
2927 cpu_to_le32(lower_32_bits(dma_handle)),
2928 cpu_to_le32(sg_dma_len(s)));
2929 }
2930 remseg -= cnt;
2931 dprintk(5, "qla1280_64bit_start_scsi: "
2932 "continuation packet data - b %i, t "
2933 "%i, l %i \n", SCSI_BUS_32(cmd),
2934 SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
2935 qla1280_dump_buffer(5, (char *)pkt,
2936 REQUEST_ENTRY_SIZE);
2937 }
2938 } else { /* No data transfer */
2939 dprintk(5, "qla1280_64bit_start_scsi: No data, command "
2940 "packet data - b %i, t %i, l %i \n",
2941 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
2942 qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE);
2943 }
2944 /* Adjust ring index. */
2945 ha->req_ring_index++;
2946 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
2947 ha->req_ring_index = 0;
2948 ha->request_ring_ptr = ha->request_ring;
2949 } else
2950 ha->request_ring_ptr++;
2951
2952 /* Set chip new ring index. */
2953 dprintk(2,
2954 "qla1280_64bit_start_scsi: Wakeup RISC for pending command\n");
2955 sp->flags |= SRB_SENT;
2956 ha->actthreads++;
2957 WRT_REG_WORD(®->mailbox4, ha->req_ring_index);
2958
2959 out:
2960 if (status)
2961 dprintk(2, "qla1280_64bit_start_scsi: **** FAILED ****\n");
2962 else
2963 dprintk(3, "qla1280_64bit_start_scsi: exiting normally\n");
2964
2965 return status;
2966}
2967#else /* !QLA_64BIT_PTR */
2968
2969/*
2970 * qla1280_32bit_start_scsi
2971 * The start SCSI is responsible for building request packets on
2972 * request ring and modifying ISP input pointer.
2973 *
2974 * The Qlogic firmware interface allows every queue slot to have a SCSI
2975 * command and up to 4 scatter/gather (SG) entries. If we need more
2976 * than 4 SG entries, then continuation entries are used that can
2977 * hold another 7 entries each. The start routine determines if there
2978 * is eought empty slots then build the combination of requests to
2979 * fulfill the OS request.
2980 *
2981 * Input:
2982 * ha = adapter block pointer.
2983 * sp = SCSI Request Block structure pointer.
2984 *
2985 * Returns:
2986 * 0 = success, was able to issue command.
2987 */
2988static int
2989qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
2990{
2991 struct device_reg __iomem *reg = ha->iobase;
2992 struct scsi_cmnd *cmd = sp->cmd;
2993 struct cmd_entry *pkt;
2994 __le32 *dword_ptr;
2995 int status = 0;
2996 int cnt;
2997 int req_cnt;
2998 int seg_cnt;
2999 u8 dir;
3000
3001 ENTER("qla1280_32bit_start_scsi");
3002
3003 dprintk(1, "32bit_start: cmd=%p sp=%p CDB=%x\n", cmd, sp,
3004 cmd->cmnd[0]);
3005
3006 /* Calculate number of entries and segments required. */
3007 req_cnt = 1;
3008 seg_cnt = scsi_dma_map(cmd);
3009 if (seg_cnt) {
3010 /*
3011 * if greater than four sg entries then we need to allocate
3012 * continuation entries
3013 */
3014 if (seg_cnt > 4) {
3015 req_cnt += (seg_cnt - 4) / 7;
3016 if ((seg_cnt - 4) % 7)
3017 req_cnt++;
3018 }
3019 dprintk(3, "S/G Transfer cmd=%p seg_cnt=0x%x, req_cnt=%x\n",
3020 cmd, seg_cnt, req_cnt);
3021 } else if (seg_cnt < 0) {
3022 status = 1;
3023 goto out;
3024 }
3025
3026 if ((req_cnt + 2) >= ha->req_q_cnt) {
3027 /* Calculate number of free request entries. */
3028 cnt = RD_REG_WORD(®->mailbox4);
3029 if (ha->req_ring_index < cnt)
3030 ha->req_q_cnt = cnt - ha->req_ring_index;
3031 else
3032 ha->req_q_cnt =
3033 REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
3034 }
3035
3036 dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x\n",
3037 ha->req_q_cnt, seg_cnt);
3038 /* If room for request in request ring. */
3039 if ((req_cnt + 2) >= ha->req_q_cnt) {
3040 status = SCSI_MLQUEUE_HOST_BUSY;
3041 dprintk(2, "qla1280_32bit_start_scsi: in-ptr=0x%x, "
3042 "req_q_cnt=0x%x, req_cnt=0x%x", ha->req_ring_index,
3043 ha->req_q_cnt, req_cnt);
3044 goto out;
3045 }
3046
3047 /* Check for empty slot in outstanding command list. */
3048 for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&
3049 ha->outstanding_cmds[cnt]; cnt++);
3050
3051 if (cnt >= MAX_OUTSTANDING_COMMANDS) {
3052 status = SCSI_MLQUEUE_HOST_BUSY;
3053 dprintk(2, "qla1280_32bit_start_scsi: NO ROOM IN OUTSTANDING "
3054 "ARRAY, req_q_cnt=0x%x\n", ha->req_q_cnt);
3055 goto out;
3056 }
3057
3058 CMD_HANDLE(sp->cmd) = (unsigned char *) (unsigned long)(cnt + 1);
3059 ha->outstanding_cmds[cnt] = sp;
3060 ha->req_q_cnt -= req_cnt;
3061
3062 /*
3063 * Build command packet.
3064 */
3065 pkt = (struct cmd_entry *) ha->request_ring_ptr;
3066
3067 pkt->entry_type = COMMAND_TYPE;
3068 pkt->entry_count = (uint8_t) req_cnt;
3069 pkt->sys_define = (uint8_t) ha->req_ring_index;
3070 pkt->entry_status = 0;
3071 pkt->handle = cpu_to_le32(cnt);
3072
3073 /* Zero out remaining portion of packet. */
3074 memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8));
3075
3076 /* Set ISP command timeout. */
3077 pkt->timeout = cpu_to_le16(scsi_cmd_to_rq(cmd)->timeout / HZ);
3078
3079 /* Set device target ID and LUN */
3080 pkt->lun = SCSI_LUN_32(cmd);
3081 pkt->target = SCSI_BUS_32(cmd) ?
3082 (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
3083
3084 /* Enable simple tag queuing if device supports it. */
3085 if (cmd->device->simple_tags)
3086 pkt->control_flags |= cpu_to_le16(BIT_3);
3087
3088 /* Load SCSI command packet. */
3089 pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
3090 memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));
3091
3092 /*dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
3093 /* Set transfer direction. */
3094 dir = qla1280_data_direction(cmd);
3095 pkt->control_flags |= cpu_to_le16(dir);
3096
3097 /* Set total data segment count. */
3098 pkt->dseg_count = cpu_to_le16(seg_cnt);
3099
3100 /*
3101 * Load data segments.
3102 */
3103 if (seg_cnt) {
3104 struct scatterlist *sg, *s;
3105 int remseg = seg_cnt;
3106
3107 sg = scsi_sglist(cmd);
3108
3109 /* Setup packet address segment pointer. */
3110 dword_ptr = &pkt->dseg_0_address;
3111
3112 dprintk(3, "Building S/G data segments..\n");
3113 qla1280_dump_buffer(1, (char *)sg, 4 * 16);
3114
3115 /* Load command entry data segments. */
3116 for_each_sg(sg, s, seg_cnt, cnt) {
3117 if (cnt == 4)
3118 break;
3119 *dword_ptr++ =
3120 cpu_to_le32(lower_32_bits(sg_dma_address(s)));
3121 *dword_ptr++ = cpu_to_le32(sg_dma_len(s));
3122 dprintk(3, "S/G Segment phys_addr=0x%lx, len=0x%x\n",
3123 (lower_32_bits(sg_dma_address(s))),
3124 (sg_dma_len(s)));
3125 remseg--;
3126 }
3127 /*
3128 * Build continuation packets.
3129 */
3130 dprintk(3, "S/G Building Continuation"
3131 "...seg_cnt=0x%x remains\n", seg_cnt);
3132 while (remseg > 0) {
3133 /* Continue from end point */
3134 sg = s;
3135 /* Adjust ring index. */
3136 ha->req_ring_index++;
3137 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
3138 ha->req_ring_index = 0;
3139 ha->request_ring_ptr =
3140 ha->request_ring;
3141 } else
3142 ha->request_ring_ptr++;
3143
3144 pkt = (struct cmd_entry *)ha->request_ring_ptr;
3145
3146 /* Zero out packet. */
3147 memset(pkt, 0, REQUEST_ENTRY_SIZE);
3148
3149 /* Load packet defaults. */
3150 ((struct cont_entry *) pkt)->
3151 entry_type = CONTINUE_TYPE;
3152 ((struct cont_entry *) pkt)->entry_count = 1;
3153
3154 ((struct cont_entry *) pkt)->sys_define =
3155 (uint8_t) ha->req_ring_index;
3156
3157 /* Setup packet address segment pointer. */
3158 dword_ptr =
3159 &((struct cont_entry *) pkt)->dseg_0_address;
3160
3161 /* Load continuation entry data segments. */
3162 for_each_sg(sg, s, remseg, cnt) {
3163 if (cnt == 7)
3164 break;
3165 *dword_ptr++ =
3166 cpu_to_le32(lower_32_bits(sg_dma_address(s)));
3167 *dword_ptr++ =
3168 cpu_to_le32(sg_dma_len(s));
3169 dprintk(1,
3170 "S/G Segment Cont. phys_addr=0x%x, "
3171 "len=0x%x\n",
3172 cpu_to_le32(lower_32_bits(sg_dma_address(s))),
3173 cpu_to_le32(sg_dma_len(s)));
3174 }
3175 remseg -= cnt;
3176 dprintk(5, "qla1280_32bit_start_scsi: "
3177 "continuation packet data - "
3178 "scsi(%i:%i:%i)\n", SCSI_BUS_32(cmd),
3179 SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
3180 qla1280_dump_buffer(5, (char *)pkt,
3181 REQUEST_ENTRY_SIZE);
3182 }
3183 } else { /* No data transfer at all */
3184 dprintk(5, "qla1280_32bit_start_scsi: No data, command "
3185 "packet data - \n");
3186 qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE);
3187 }
3188 dprintk(5, "qla1280_32bit_start_scsi: First IOCB block:\n");
3189 qla1280_dump_buffer(5, (char *)ha->request_ring_ptr,
3190 REQUEST_ENTRY_SIZE);
3191
3192 /* Adjust ring index. */
3193 ha->req_ring_index++;
3194 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
3195 ha->req_ring_index = 0;
3196 ha->request_ring_ptr = ha->request_ring;
3197 } else
3198 ha->request_ring_ptr++;
3199
3200 /* Set chip new ring index. */
3201 dprintk(2, "qla1280_32bit_start_scsi: Wakeup RISC "
3202 "for pending command\n");
3203 sp->flags |= SRB_SENT;
3204 ha->actthreads++;
3205 WRT_REG_WORD(®->mailbox4, ha->req_ring_index);
3206
3207out:
3208 if (status)
3209 dprintk(2, "qla1280_32bit_start_scsi: **** FAILED ****\n");
3210
3211 LEAVE("qla1280_32bit_start_scsi");
3212
3213 return status;
3214}
3215#endif
3216
3217/*
3218 * qla1280_req_pkt
3219 * Function is responsible for locking ring and
3220 * getting a zeroed out request packet.
3221 *
3222 * Input:
3223 * ha = adapter block pointer.
3224 *
3225 * Returns:
3226 * 0 = failed to get slot.
3227 */
3228static request_t *
3229qla1280_req_pkt(struct scsi_qla_host *ha)
3230{
3231 struct device_reg __iomem *reg = ha->iobase;
3232 request_t *pkt = NULL;
3233 int cnt;
3234 uint32_t timer;
3235
3236 ENTER("qla1280_req_pkt");
3237
3238 /*
3239 * This can be called from interrupt context, damn it!!!
3240 */
3241 /* Wait for 30 seconds for slot. */
3242 for (timer = 15000000; timer; timer--) {
3243 if (ha->req_q_cnt > 0) {
3244 /* Calculate number of free request entries. */
3245 cnt = RD_REG_WORD(®->mailbox4);
3246 if (ha->req_ring_index < cnt)
3247 ha->req_q_cnt = cnt - ha->req_ring_index;
3248 else
3249 ha->req_q_cnt =
3250 REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
3251 }
3252
3253 /* Found empty request ring slot? */
3254 if (ha->req_q_cnt > 0) {
3255 ha->req_q_cnt--;
3256 pkt = ha->request_ring_ptr;
3257
3258 /* Zero out packet. */
3259 memset(pkt, 0, REQUEST_ENTRY_SIZE);
3260
3261 /*
3262 * How can this be right when we have a ring
3263 * size of 512???
3264 */
3265 /* Set system defined field. */
3266 pkt->sys_define = (uint8_t) ha->req_ring_index;
3267
3268 /* Set entry count. */
3269 pkt->entry_count = 1;
3270
3271 break;
3272 }
3273
3274 udelay(2); /* 10 */
3275
3276 /* Check for pending interrupts. */
3277 qla1280_poll(ha);
3278 }
3279
3280 if (!pkt)
3281 dprintk(2, "qla1280_req_pkt: **** FAILED ****\n");
3282 else
3283 dprintk(3, "qla1280_req_pkt: exiting normally\n");
3284
3285 return pkt;
3286}
3287
3288/*
3289 * qla1280_isp_cmd
3290 * Function is responsible for modifying ISP input pointer.
3291 * Releases ring lock.
3292 *
3293 * Input:
3294 * ha = adapter block pointer.
3295 */
3296static void
3297qla1280_isp_cmd(struct scsi_qla_host *ha)
3298{
3299 struct device_reg __iomem *reg = ha->iobase;
3300
3301 ENTER("qla1280_isp_cmd");
3302
3303 dprintk(5, "qla1280_isp_cmd: IOCB data:\n");
3304 qla1280_dump_buffer(5, (char *)ha->request_ring_ptr,
3305 REQUEST_ENTRY_SIZE);
3306
3307 /* Adjust ring index. */
3308 ha->req_ring_index++;
3309 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
3310 ha->req_ring_index = 0;
3311 ha->request_ring_ptr = ha->request_ring;
3312 } else
3313 ha->request_ring_ptr++;
3314
3315 /*
3316 * Update request index to mailbox4 (Request Queue In).
3317 */
3318 WRT_REG_WORD(®->mailbox4, ha->req_ring_index);
3319
3320 LEAVE("qla1280_isp_cmd");
3321}
3322
3323/****************************************************************************/
3324/* Interrupt Service Routine. */
3325/****************************************************************************/
3326
3327/****************************************************************************
3328 * qla1280_isr
3329 * Calls I/O done on command completion.
3330 *
3331 * Input:
3332 * ha = adapter block pointer.
3333 * done_q = done queue.
3334 ****************************************************************************/
3335static void
3336qla1280_isr(struct scsi_qla_host *ha, struct list_head *done_q)
3337{
3338 struct device_reg __iomem *reg = ha->iobase;
3339 struct response *pkt;
3340 struct srb *sp = NULL;
3341 uint16_t mailbox[MAILBOX_REGISTER_COUNT];
3342 uint16_t *wptr;
3343 uint32_t index;
3344 u16 istatus;
3345
3346 ENTER("qla1280_isr");
3347
3348 istatus = RD_REG_WORD(®->istatus);
3349 if (!(istatus & (RISC_INT | PCI_INT)))
3350 return;
3351
3352 /* Save mailbox register 5 */
3353 mailbox[5] = RD_REG_WORD(®->mailbox5);
3354
3355 /* Check for mailbox interrupt. */
3356
3357 mailbox[0] = RD_REG_WORD_dmasync(®->semaphore);
3358
3359 if (mailbox[0] & BIT_0) {
3360 /* Get mailbox data. */
3361 /* dprintk(1, "qla1280_isr: In Get mailbox data \n"); */
3362
3363 wptr = &mailbox[0];
3364 *wptr++ = RD_REG_WORD(®->mailbox0);
3365 *wptr++ = RD_REG_WORD(®->mailbox1);
3366 *wptr = RD_REG_WORD(®->mailbox2);
3367 if (mailbox[0] != MBA_SCSI_COMPLETION) {
3368 wptr++;
3369 *wptr++ = RD_REG_WORD(®->mailbox3);
3370 *wptr++ = RD_REG_WORD(®->mailbox4);
3371 wptr++;
3372 *wptr++ = RD_REG_WORD(®->mailbox6);
3373 *wptr = RD_REG_WORD(®->mailbox7);
3374 }
3375
3376 /* Release mailbox registers. */
3377
3378 WRT_REG_WORD(®->semaphore, 0);
3379 WRT_REG_WORD(®->host_cmd, HC_CLR_RISC_INT);
3380
3381 dprintk(5, "qla1280_isr: mailbox interrupt mailbox[0] = 0x%x",
3382 mailbox[0]);
3383
3384 /* Handle asynchronous event */
3385 switch (mailbox[0]) {
3386 case MBA_SCSI_COMPLETION: /* Response completion */
3387 dprintk(5, "qla1280_isr: mailbox SCSI response "
3388 "completion\n");
3389
3390 if (ha->flags.online) {
3391 /* Get outstanding command index. */
3392 index = mailbox[2] << 16 | mailbox[1];
3393
3394 /* Validate handle. */
3395 if (index < MAX_OUTSTANDING_COMMANDS)
3396 sp = ha->outstanding_cmds[index];
3397 else
3398 sp = NULL;
3399
3400 if (sp) {
3401 /* Free outstanding command slot. */
3402 ha->outstanding_cmds[index] = NULL;
3403
3404 /* Save ISP completion status */
3405 CMD_RESULT(sp->cmd) = 0;
3406 CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
3407
3408 /* Place block on done queue */
3409 list_add_tail(&sp->list, done_q);
3410 } else {
3411 /*
3412 * If we get here we have a real problem!
3413 */
3414 printk(KERN_WARNING
3415 "qla1280: ISP invalid handle\n");
3416 }
3417 }
3418 break;
3419
3420 case MBA_BUS_RESET: /* SCSI Bus Reset */
3421 ha->flags.reset_marker = 1;
3422 index = mailbox[6] & BIT_0;
3423 ha->bus_settings[index].reset_marker = 1;
3424
3425 printk(KERN_DEBUG "qla1280_isr(): index %i "
3426 "asynchronous BUS_RESET\n", index);
3427 break;
3428
3429 case MBA_SYSTEM_ERR: /* System Error */
3430 printk(KERN_WARNING
3431 "qla1280: ISP System Error - mbx1=%xh, mbx2="
3432 "%xh, mbx3=%xh\n", mailbox[1], mailbox[2],
3433 mailbox[3]);
3434 break;
3435
3436 case MBA_REQ_TRANSFER_ERR: /* Request Transfer Error */
3437 printk(KERN_WARNING
3438 "qla1280: ISP Request Transfer Error\n");
3439 break;
3440
3441 case MBA_RSP_TRANSFER_ERR: /* Response Transfer Error */
3442 printk(KERN_WARNING
3443 "qla1280: ISP Response Transfer Error\n");
3444 break;
3445
3446 case MBA_WAKEUP_THRES: /* Request Queue Wake-up */
3447 dprintk(2, "qla1280_isr: asynchronous WAKEUP_THRES\n");
3448 break;
3449
3450 case MBA_TIMEOUT_RESET: /* Execution Timeout Reset */
3451 dprintk(2,
3452 "qla1280_isr: asynchronous TIMEOUT_RESET\n");
3453 break;
3454
3455 case MBA_DEVICE_RESET: /* Bus Device Reset */
3456 printk(KERN_INFO "qla1280_isr(): asynchronous "
3457 "BUS_DEVICE_RESET\n");
3458
3459 ha->flags.reset_marker = 1;
3460 index = mailbox[6] & BIT_0;
3461 ha->bus_settings[index].reset_marker = 1;
3462 break;
3463
3464 case MBA_BUS_MODE_CHANGE:
3465 dprintk(2,
3466 "qla1280_isr: asynchronous BUS_MODE_CHANGE\n");
3467 break;
3468
3469 default:
3470 /* dprintk(1, "qla1280_isr: default case of switch MB \n"); */
3471 if (mailbox[0] < MBA_ASYNC_EVENT) {
3472 wptr = &mailbox[0];
3473 memcpy((uint16_t *) ha->mailbox_out, wptr,
3474 MAILBOX_REGISTER_COUNT *
3475 sizeof(uint16_t));
3476
3477 if(ha->mailbox_wait != NULL)
3478 complete(ha->mailbox_wait);
3479 }
3480 break;
3481 }
3482 } else {
3483 WRT_REG_WORD(®->host_cmd, HC_CLR_RISC_INT);
3484 }
3485
3486 /*
3487 * We will receive interrupts during mailbox testing prior to
3488 * the card being marked online, hence the double check.
3489 */
3490 if (!(ha->flags.online && !ha->mailbox_wait)) {
3491 dprintk(2, "qla1280_isr: Response pointer Error\n");
3492 goto out;
3493 }
3494
3495 if (mailbox[5] >= RESPONSE_ENTRY_CNT)
3496 goto out;
3497
3498 while (ha->rsp_ring_index != mailbox[5]) {
3499 pkt = ha->response_ring_ptr;
3500
3501 dprintk(5, "qla1280_isr: ha->rsp_ring_index = 0x%x, mailbox[5]"
3502 " = 0x%x\n", ha->rsp_ring_index, mailbox[5]);
3503 dprintk(5,"qla1280_isr: response packet data\n");
3504 qla1280_dump_buffer(5, (char *)pkt, RESPONSE_ENTRY_SIZE);
3505
3506 if (pkt->entry_type == STATUS_TYPE) {
3507 if ((le16_to_cpu(pkt->scsi_status) & 0xff)
3508 || pkt->comp_status || pkt->entry_status) {
3509 dprintk(2, "qla1280_isr: ha->rsp_ring_index = "
3510 "0x%x mailbox[5] = 0x%x, comp_status "
3511 "= 0x%x, scsi_status = 0x%x\n",
3512 ha->rsp_ring_index, mailbox[5],
3513 le16_to_cpu(pkt->comp_status),
3514 le16_to_cpu(pkt->scsi_status));
3515 }
3516 } else {
3517 dprintk(2, "qla1280_isr: ha->rsp_ring_index = "
3518 "0x%x, mailbox[5] = 0x%x\n",
3519 ha->rsp_ring_index, mailbox[5]);
3520 dprintk(2, "qla1280_isr: response packet data\n");
3521 qla1280_dump_buffer(2, (char *)pkt,
3522 RESPONSE_ENTRY_SIZE);
3523 }
3524
3525 if (pkt->entry_type == STATUS_TYPE || pkt->entry_status) {
3526 dprintk(2, "status: Cmd %p, handle %i\n",
3527 ha->outstanding_cmds[pkt->handle]->cmd,
3528 pkt->handle);
3529 if (pkt->entry_type == STATUS_TYPE)
3530 qla1280_status_entry(ha, pkt, done_q);
3531 else
3532 qla1280_error_entry(ha, pkt, done_q);
3533 /* Adjust ring index. */
3534 ha->rsp_ring_index++;
3535 if (ha->rsp_ring_index == RESPONSE_ENTRY_CNT) {
3536 ha->rsp_ring_index = 0;
3537 ha->response_ring_ptr = ha->response_ring;
3538 } else
3539 ha->response_ring_ptr++;
3540 WRT_REG_WORD(®->mailbox5, ha->rsp_ring_index);
3541 }
3542 }
3543
3544 out:
3545 LEAVE("qla1280_isr");
3546}
3547
3548/*
3549 * qla1280_rst_aen
3550 * Processes asynchronous reset.
3551 *
3552 * Input:
3553 * ha = adapter block pointer.
3554 */
3555static void
3556qla1280_rst_aen(struct scsi_qla_host *ha)
3557{
3558 uint8_t bus;
3559
3560 ENTER("qla1280_rst_aen");
3561
3562 if (ha->flags.online && !ha->flags.reset_active &&
3563 !ha->flags.abort_isp_active) {
3564 ha->flags.reset_active = 1;
3565 while (ha->flags.reset_marker) {
3566 /* Issue marker command. */
3567 ha->flags.reset_marker = 0;
3568 for (bus = 0; bus < ha->ports &&
3569 !ha->flags.reset_marker; bus++) {
3570 if (ha->bus_settings[bus].reset_marker) {
3571 ha->bus_settings[bus].reset_marker = 0;
3572 qla1280_marker(ha, bus, 0, 0,
3573 MK_SYNC_ALL);
3574 }
3575 }
3576 }
3577 }
3578
3579 LEAVE("qla1280_rst_aen");
3580}
3581
3582
3583/*
3584 * qla1280_status_entry
3585 * Processes received ISP status entry.
3586 *
3587 * Input:
3588 * ha = adapter block pointer.
3589 * pkt = entry pointer.
3590 * done_q = done queue.
3591 */
3592static void
3593qla1280_status_entry(struct scsi_qla_host *ha, struct response *pkt,
3594 struct list_head *done_q)
3595{
3596 int sense_sz;
3597 struct srb *sp;
3598 struct scsi_cmnd *cmd;
3599 uint32_t handle = le32_to_cpu(pkt->handle);
3600 uint16_t scsi_status = le16_to_cpu(pkt->scsi_status);
3601 uint16_t comp_status = le16_to_cpu(pkt->comp_status);
3602
3603 ENTER("qla1280_status_entry");
3604
3605 /* Validate handle. */
3606 if (handle < MAX_OUTSTANDING_COMMANDS)
3607 sp = ha->outstanding_cmds[handle];
3608 else
3609 sp = NULL;
3610
3611 if (!sp) {
3612 printk(KERN_WARNING "qla1280: Status Entry invalid handle\n");
3613 goto out;
3614 }
3615
3616 /* Free outstanding command slot. */
3617 ha->outstanding_cmds[handle] = NULL;
3618
3619 cmd = sp->cmd;
3620
3621 if (comp_status || scsi_status) {
3622 dprintk(3, "scsi: comp_status = 0x%x, scsi_status = "
3623 "0x%x, handle = 0x%x\n", comp_status,
3624 scsi_status, handle);
3625 }
3626
3627 /* Target busy or queue full */
3628 if ((scsi_status & 0xFF) == SAM_STAT_TASK_SET_FULL ||
3629 (scsi_status & 0xFF) == SAM_STAT_BUSY) {
3630 CMD_RESULT(cmd) = scsi_status & 0xff;
3631 } else {
3632
3633 /* Save ISP completion status */
3634 CMD_RESULT(cmd) = qla1280_return_status(pkt, cmd);
3635
3636 if (scsi_status & SAM_STAT_CHECK_CONDITION) {
3637 if (comp_status != CS_ARS_FAILED) {
3638 uint16_t req_sense_length =
3639 le16_to_cpu(pkt->req_sense_length);
3640 if (req_sense_length < CMD_SNSLEN(cmd))
3641 sense_sz = req_sense_length;
3642 else
3643 /*
3644 * scsi_cmnd->sense_buffer is
3645 * 64 bytes, why only copy 63?
3646 * This looks wrong! /Jes
3647 */
3648 sense_sz = CMD_SNSLEN(cmd) - 1;
3649
3650 memcpy(cmd->sense_buffer,
3651 &pkt->req_sense_data, sense_sz);
3652 } else
3653 sense_sz = 0;
3654 memset(cmd->sense_buffer + sense_sz, 0,
3655 SCSI_SENSE_BUFFERSIZE - sense_sz);
3656
3657 dprintk(2, "qla1280_status_entry: Check "
3658 "condition Sense data, b %i, t %i, "
3659 "l %i\n", SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
3660 SCSI_LUN_32(cmd));
3661 if (sense_sz)
3662 qla1280_dump_buffer(2,
3663 (char *)cmd->sense_buffer,
3664 sense_sz);
3665 }
3666 }
3667
3668 CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
3669
3670 /* Place command on done queue. */
3671 list_add_tail(&sp->list, done_q);
3672 out:
3673 LEAVE("qla1280_status_entry");
3674}
3675
3676/*
3677 * qla1280_error_entry
3678 * Processes error entry.
3679 *
3680 * Input:
3681 * ha = adapter block pointer.
3682 * pkt = entry pointer.
3683 * done_q = done queue.
3684 */
3685static void
3686qla1280_error_entry(struct scsi_qla_host *ha, struct response *pkt,
3687 struct list_head *done_q)
3688{
3689 struct srb *sp;
3690 uint32_t handle = le32_to_cpu(pkt->handle);
3691
3692 ENTER("qla1280_error_entry");
3693
3694 if (pkt->entry_status & BIT_3)
3695 dprintk(2, "qla1280_error_entry: BAD PAYLOAD flag error\n");
3696 else if (pkt->entry_status & BIT_2)
3697 dprintk(2, "qla1280_error_entry: BAD HEADER flag error\n");
3698 else if (pkt->entry_status & BIT_1)
3699 dprintk(2, "qla1280_error_entry: FULL flag error\n");
3700 else
3701 dprintk(2, "qla1280_error_entry: UNKNOWN flag error\n");
3702
3703 /* Validate handle. */
3704 if (handle < MAX_OUTSTANDING_COMMANDS)
3705 sp = ha->outstanding_cmds[handle];
3706 else
3707 sp = NULL;
3708
3709 if (sp) {
3710 /* Free outstanding command slot. */
3711 ha->outstanding_cmds[handle] = NULL;
3712
3713 /* Bad payload or header */
3714 if (pkt->entry_status & (BIT_3 + BIT_2)) {
3715 /* Bad payload or header, set error status. */
3716 /* CMD_RESULT(sp->cmd) = CS_BAD_PAYLOAD; */
3717 CMD_RESULT(sp->cmd) = DID_ERROR << 16;
3718 } else if (pkt->entry_status & BIT_1) { /* FULL flag */
3719 CMD_RESULT(sp->cmd) = DID_BUS_BUSY << 16;
3720 } else {
3721 /* Set error status. */
3722 CMD_RESULT(sp->cmd) = DID_ERROR << 16;
3723 }
3724
3725 CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
3726
3727 /* Place command on done queue. */
3728 list_add_tail(&sp->list, done_q);
3729 }
3730#ifdef QLA_64BIT_PTR
3731 else if (pkt->entry_type == COMMAND_A64_TYPE) {
3732 printk(KERN_WARNING "!qla1280: Error Entry invalid handle");
3733 }
3734#endif
3735
3736 LEAVE("qla1280_error_entry");
3737}
3738
3739/*
3740 * qla1280_abort_isp
3741 * Resets ISP and aborts all outstanding commands.
3742 *
3743 * Input:
3744 * ha = adapter block pointer.
3745 *
3746 * Returns:
3747 * 0 = success
3748 */
3749static int
3750qla1280_abort_isp(struct scsi_qla_host *ha)
3751{
3752 struct device_reg __iomem *reg = ha->iobase;
3753 struct srb *sp;
3754 int status = 0;
3755 int cnt;
3756 int bus;
3757
3758 ENTER("qla1280_abort_isp");
3759
3760 if (ha->flags.abort_isp_active || !ha->flags.online)
3761 goto out;
3762
3763 ha->flags.abort_isp_active = 1;
3764
3765 /* Disable ISP interrupts. */
3766 qla1280_disable_intrs(ha);
3767 WRT_REG_WORD(®->host_cmd, HC_PAUSE_RISC);
3768 RD_REG_WORD(®->id_l);
3769
3770 printk(KERN_INFO "scsi(%li): dequeuing outstanding commands\n",
3771 ha->host_no);
3772 /* Dequeue all commands in outstanding command list. */
3773 for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
3774 struct scsi_cmnd *cmd;
3775 sp = ha->outstanding_cmds[cnt];
3776 if (sp) {
3777 cmd = sp->cmd;
3778 CMD_RESULT(cmd) = DID_RESET << 16;
3779 CMD_HANDLE(cmd) = COMPLETED_HANDLE;
3780 ha->outstanding_cmds[cnt] = NULL;
3781 list_add_tail(&sp->list, &ha->done_q);
3782 }
3783 }
3784
3785 qla1280_done(ha);
3786
3787 status = qla1280_load_firmware(ha);
3788 if (status)
3789 goto out;
3790
3791 /* Setup adapter based on NVRAM parameters. */
3792 qla1280_nvram_config (ha);
3793
3794 status = qla1280_init_rings(ha);
3795 if (status)
3796 goto out;
3797
3798 /* Issue SCSI reset. */
3799 for (bus = 0; bus < ha->ports; bus++)
3800 qla1280_bus_reset(ha, bus);
3801
3802 ha->flags.abort_isp_active = 0;
3803 out:
3804 if (status) {
3805 printk(KERN_WARNING
3806 "qla1280: ISP error recovery failed, board disabled");
3807 qla1280_reset_adapter(ha);
3808 dprintk(2, "qla1280_abort_isp: **** FAILED ****\n");
3809 }
3810
3811 LEAVE("qla1280_abort_isp");
3812 return status;
3813}
3814
3815
3816/*
3817 * qla1280_debounce_register
3818 * Debounce register.
3819 *
3820 * Input:
3821 * port = register address.
3822 *
3823 * Returns:
3824 * register value.
3825 */
3826static u16
3827qla1280_debounce_register(volatile u16 __iomem * addr)
3828{
3829 volatile u16 ret;
3830 volatile u16 ret2;
3831
3832 ret = RD_REG_WORD(addr);
3833 ret2 = RD_REG_WORD(addr);
3834
3835 if (ret == ret2)
3836 return ret;
3837
3838 do {
3839 cpu_relax();
3840 ret = RD_REG_WORD(addr);
3841 ret2 = RD_REG_WORD(addr);
3842 } while (ret != ret2);
3843
3844 return ret;
3845}
3846
3847
3848/************************************************************************
3849 * qla1280_check_for_dead_scsi_bus *
3850 * *
3851 * This routine checks for a dead SCSI bus *
3852 ************************************************************************/
3853#define SET_SXP_BANK 0x0100
3854#define SCSI_PHASE_INVALID 0x87FF
3855static int
3856qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *ha, unsigned int bus)
3857{
3858 uint16_t config_reg, scsi_control;
3859 struct device_reg __iomem *reg = ha->iobase;
3860
3861 if (ha->bus_settings[bus].scsi_bus_dead) {
3862 WRT_REG_WORD(®->host_cmd, HC_PAUSE_RISC);
3863 config_reg = RD_REG_WORD(®->cfg_1);
3864 WRT_REG_WORD(®->cfg_1, SET_SXP_BANK);
3865 scsi_control = RD_REG_WORD(®->scsiControlPins);
3866 WRT_REG_WORD(®->cfg_1, config_reg);
3867 WRT_REG_WORD(®->host_cmd, HC_RELEASE_RISC);
3868
3869 if (scsi_control == SCSI_PHASE_INVALID) {
3870 ha->bus_settings[bus].scsi_bus_dead = 1;
3871 return 1; /* bus is dead */
3872 } else {
3873 ha->bus_settings[bus].scsi_bus_dead = 0;
3874 ha->bus_settings[bus].failed_reset_count = 0;
3875 }
3876 }
3877 return 0; /* bus is not dead */
3878}
3879
3880static void
3881qla1280_get_target_parameters(struct scsi_qla_host *ha,
3882 struct scsi_device *device)
3883{
3884 uint16_t mb[MAILBOX_REGISTER_COUNT];
3885 int bus, target, lun;
3886
3887 bus = device->channel;
3888 target = device->id;
3889 lun = device->lun;
3890
3891
3892 mb[0] = MBC_GET_TARGET_PARAMETERS;
3893 mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
3894 mb[1] <<= 8;
3895 qla1280_mailbox_command(ha, BIT_6 | BIT_3 | BIT_2 | BIT_1 | BIT_0,
3896 &mb[0]);
3897
3898 printk(KERN_INFO "scsi(%li:%d:%d:%d):", ha->host_no, bus, target, lun);
3899
3900 if (mb[3] != 0) {
3901 printk(KERN_CONT " Sync: period %d, offset %d",
3902 (mb[3] & 0xff), (mb[3] >> 8));
3903 if (mb[2] & BIT_13)
3904 printk(KERN_CONT ", Wide");
3905 if ((mb[2] & BIT_5) && ((mb[6] >> 8) & 0xff) >= 2)
3906 printk(KERN_CONT ", DT");
3907 } else
3908 printk(KERN_CONT " Async");
3909
3910 if (device->simple_tags)
3911 printk(KERN_CONT ", Tagged queuing: depth %d", device->queue_depth);
3912 printk(KERN_CONT "\n");
3913}
3914
3915
3916#if DEBUG_QLA1280
3917static void
3918__qla1280_dump_buffer(char *b, int size)
3919{
3920 int cnt;
3921 u8 c;
3922
3923 printk(KERN_DEBUG " 0 1 2 3 4 5 6 7 8 9 Ah "
3924 "Bh Ch Dh Eh Fh\n");
3925 printk(KERN_DEBUG "---------------------------------------------"
3926 "------------------\n");
3927
3928 for (cnt = 0; cnt < size;) {
3929 c = *b++;
3930
3931 printk("0x%02x", c);
3932 cnt++;
3933 if (!(cnt % 16))
3934 printk("\n");
3935 else
3936 printk(" ");
3937 }
3938 if (cnt % 16)
3939 printk("\n");
3940}
3941
3942/**************************************************************************
3943 * ql1280_print_scsi_cmd
3944 *
3945 **************************************************************************/
3946static void
3947__qla1280_print_scsi_cmd(struct scsi_cmnd *cmd)
3948{
3949 struct scsi_qla_host *ha;
3950 struct Scsi_Host *host = CMD_HOST(cmd);
3951 struct srb *sp;
3952 /* struct scatterlist *sg; */
3953
3954 int i;
3955 ha = (struct scsi_qla_host *)host->hostdata;
3956
3957 sp = scsi_cmd_priv(cmd);
3958 printk("SCSI Command @= 0x%p, Handle=0x%p\n", cmd, CMD_HANDLE(cmd));
3959 printk(" chan=%d, target = 0x%02x, lun = 0x%02x, cmd_len = 0x%02x\n",
3960 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd),
3961 CMD_CDBLEN(cmd));
3962 printk(" CDB = ");
3963 for (i = 0; i < cmd->cmd_len; i++) {
3964 printk("0x%02x ", cmd->cmnd[i]);
3965 }
3966 printk(" seg_cnt =%d\n", scsi_sg_count(cmd));
3967 printk(" request buffer=0x%p, request buffer len=0x%x\n",
3968 scsi_sglist(cmd), scsi_bufflen(cmd));
3969 /* if (cmd->use_sg)
3970 {
3971 sg = (struct scatterlist *) cmd->request_buffer;
3972 printk(" SG buffer: \n");
3973 qla1280_dump_buffer(1, (char *)sg, (cmd->use_sg*sizeof(struct scatterlist)));
3974 } */
3975 printk(" tag=%d, transfersize=0x%x \n",
3976 scsi_cmd_to_rq(cmd)->tag, cmd->transfersize);
3977 printk(" underflow size = 0x%x, direction=0x%x\n",
3978 cmd->underflow, cmd->sc_data_direction);
3979}
3980
3981/**************************************************************************
3982 * ql1280_dump_device
3983 *
3984 **************************************************************************/
3985static void
3986ql1280_dump_device(struct scsi_qla_host *ha)
3987{
3988
3989 struct scsi_cmnd *cp;
3990 struct srb *sp;
3991 int i;
3992
3993 printk(KERN_DEBUG "Outstanding Commands on controller:\n");
3994
3995 for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
3996 if ((sp = ha->outstanding_cmds[i]) == NULL)
3997 continue;
3998 if ((cp = sp->cmd) == NULL)
3999 continue;
4000 qla1280_print_scsi_cmd(1, cp);
4001 }
4002}
4003#endif
4004
4005
4006enum tokens {
4007 TOKEN_NVRAM,
4008 TOKEN_SYNC,
4009 TOKEN_WIDE,
4010 TOKEN_PPR,
4011 TOKEN_VERBOSE,
4012 TOKEN_DEBUG,
4013};
4014
4015struct setup_tokens {
4016 char *token;
4017 int val;
4018};
4019
4020static struct setup_tokens setup_token[] __initdata =
4021{
4022 { "nvram", TOKEN_NVRAM },
4023 { "sync", TOKEN_SYNC },
4024 { "wide", TOKEN_WIDE },
4025 { "ppr", TOKEN_PPR },
4026 { "verbose", TOKEN_VERBOSE },
4027 { "debug", TOKEN_DEBUG },
4028};
4029
4030
4031/**************************************************************************
4032 * qla1280_setup
4033 *
4034 * Handle boot parameters. This really needs to be changed so one
4035 * can specify per adapter parameters.
4036 **************************************************************************/
4037static int __init
4038qla1280_setup(char *s)
4039{
4040 char *cp, *ptr;
4041 unsigned long val;
4042
4043 cp = s;
4044
4045 while (cp && (ptr = strchr(cp, ':'))) {
4046 ptr++;
4047 if (!strcmp(ptr, "yes")) {
4048 val = 0x10000;
4049 ptr += 3;
4050 } else if (!strcmp(ptr, "no")) {
4051 val = 0;
4052 ptr += 2;
4053 } else
4054 val = simple_strtoul(ptr, &ptr, 0);
4055
4056 switch (qla1280_get_token(cp)) {
4057 case TOKEN_NVRAM:
4058 if (!val)
4059 driver_setup.no_nvram = 1;
4060 break;
4061 case TOKEN_SYNC:
4062 if (!val)
4063 driver_setup.no_sync = 1;
4064 else if (val != 0x10000)
4065 driver_setup.sync_mask = val;
4066 break;
4067 case TOKEN_WIDE:
4068 if (!val)
4069 driver_setup.no_wide = 1;
4070 else if (val != 0x10000)
4071 driver_setup.wide_mask = val;
4072 break;
4073 case TOKEN_PPR:
4074 if (!val)
4075 driver_setup.no_ppr = 1;
4076 else if (val != 0x10000)
4077 driver_setup.ppr_mask = val;
4078 break;
4079 case TOKEN_VERBOSE:
4080 qla1280_verbose = val;
4081 break;
4082 default:
4083 printk(KERN_INFO "qla1280: unknown boot option %s\n",
4084 cp);
4085 }
4086
4087 cp = strchr(ptr, ';');
4088 if (cp)
4089 cp++;
4090 else {
4091 break;
4092 }
4093 }
4094 return 1;
4095}
4096
4097
4098static int __init
4099qla1280_get_token(char *str)
4100{
4101 char *sep;
4102 long ret = -1;
4103 int i;
4104
4105 sep = strchr(str, ':');
4106
4107 if (sep) {
4108 for (i = 0; i < ARRAY_SIZE(setup_token); i++) {
4109 if (!strncmp(setup_token[i].token, str, (sep - str))) {
4110 ret = setup_token[i].val;
4111 break;
4112 }
4113 }
4114 }
4115
4116 return ret;
4117}
4118
4119
4120static const struct scsi_host_template qla1280_driver_template = {
4121 .module = THIS_MODULE,
4122 .proc_name = "qla1280",
4123 .name = "Qlogic ISP 1280/12160",
4124 .info = qla1280_info,
4125 .slave_configure = qla1280_slave_configure,
4126 .queuecommand = qla1280_queuecommand,
4127 .eh_abort_handler = qla1280_eh_abort,
4128 .eh_device_reset_handler= qla1280_eh_device_reset,
4129 .eh_bus_reset_handler = qla1280_eh_bus_reset,
4130 .eh_host_reset_handler = qla1280_eh_adapter_reset,
4131 .bios_param = qla1280_biosparam,
4132 .can_queue = MAX_OUTSTANDING_COMMANDS,
4133 .this_id = -1,
4134 .sg_tablesize = SG_ALL,
4135 .cmd_size = sizeof(struct srb),
4136};
4137
4138
4139static int
4140qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
4141{
4142 int devnum = id->driver_data;
4143 struct qla_boards *bdp = &ql1280_board_tbl[devnum];
4144 struct Scsi_Host *host;
4145 struct scsi_qla_host *ha;
4146 int error = -ENODEV;
4147
4148 /* Bypass all AMI SUBSYS VENDOR IDs */
4149 if (pdev->subsystem_vendor == PCI_VENDOR_ID_AMI) {
4150 printk(KERN_INFO
4151 "qla1280: Skipping AMI SubSys Vendor ID Chip\n");
4152 goto error;
4153 }
4154
4155 printk(KERN_INFO "qla1280: %s found on PCI bus %i, dev %i\n",
4156 bdp->name, pdev->bus->number, PCI_SLOT(pdev->devfn));
4157
4158 if (pci_enable_device(pdev)) {
4159 printk(KERN_WARNING
4160 "qla1280: Failed to enabled pci device, aborting.\n");
4161 goto error;
4162 }
4163
4164 pci_set_master(pdev);
4165
4166 error = -ENOMEM;
4167 host = scsi_host_alloc(&qla1280_driver_template, sizeof(*ha));
4168 if (!host) {
4169 printk(KERN_WARNING
4170 "qla1280: Failed to register host, aborting.\n");
4171 goto error_disable_device;
4172 }
4173
4174 ha = (struct scsi_qla_host *)host->hostdata;
4175 memset(ha, 0, sizeof(struct scsi_qla_host));
4176
4177 ha->pdev = pdev;
4178 ha->devnum = devnum; /* specifies microcode load address */
4179
4180#ifdef QLA_64BIT_PTR
4181 if (dma_set_mask_and_coherent(&ha->pdev->dev, DMA_BIT_MASK(64))) {
4182 if (dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(32))) {
4183 printk(KERN_WARNING "scsi(%li): Unable to set a "
4184 "suitable DMA mask - aborting\n", ha->host_no);
4185 error = -ENODEV;
4186 goto error_put_host;
4187 }
4188 } else
4189 dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n",
4190 ha->host_no);
4191#else
4192 if (dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(32))) {
4193 printk(KERN_WARNING "scsi(%li): Unable to set a "
4194 "suitable DMA mask - aborting\n", ha->host_no);
4195 error = -ENODEV;
4196 goto error_put_host;
4197 }
4198#endif
4199
4200 ha->request_ring = dma_alloc_coherent(&ha->pdev->dev,
4201 ((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)),
4202 &ha->request_dma, GFP_KERNEL);
4203 if (!ha->request_ring) {
4204 printk(KERN_INFO "qla1280: Failed to get request memory\n");
4205 goto error_put_host;
4206 }
4207
4208 ha->response_ring = dma_alloc_coherent(&ha->pdev->dev,
4209 ((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)),
4210 &ha->response_dma, GFP_KERNEL);
4211 if (!ha->response_ring) {
4212 printk(KERN_INFO "qla1280: Failed to get response memory\n");
4213 goto error_free_request_ring;
4214 }
4215
4216 ha->ports = bdp->numPorts;
4217
4218 ha->host = host;
4219 ha->host_no = host->host_no;
4220
4221 host->irq = pdev->irq;
4222 host->max_channel = bdp->numPorts - 1;
4223 host->max_lun = MAX_LUNS - 1;
4224 host->max_id = MAX_TARGETS;
4225 host->max_sectors = 1024;
4226 host->unique_id = host->host_no;
4227
4228 error = -ENODEV;
4229
4230#if MEMORY_MAPPED_IO
4231 ha->mmpbase = pci_ioremap_bar(ha->pdev, 1);
4232 if (!ha->mmpbase) {
4233 printk(KERN_INFO "qla1280: Unable to map I/O memory\n");
4234 goto error_free_response_ring;
4235 }
4236
4237 host->base = (unsigned long)ha->mmpbase;
4238 ha->iobase = (struct device_reg __iomem *)ha->mmpbase;
4239#else
4240 host->io_port = pci_resource_start(ha->pdev, 0);
4241 if (!request_region(host->io_port, 0xff, "qla1280")) {
4242 printk(KERN_INFO "qla1280: Failed to reserve i/o region "
4243 "0x%04lx-0x%04lx - already in use\n",
4244 host->io_port, host->io_port + 0xff);
4245 goto error_free_response_ring;
4246 }
4247
4248 ha->iobase = (struct device_reg *)host->io_port;
4249#endif
4250
4251 INIT_LIST_HEAD(&ha->done_q);
4252
4253 /* Disable ISP interrupts. */
4254 qla1280_disable_intrs(ha);
4255
4256 if (request_irq(pdev->irq, qla1280_intr_handler, IRQF_SHARED,
4257 "qla1280", ha)) {
4258 printk("qla1280 : Failed to reserve interrupt %d already "
4259 "in use\n", pdev->irq);
4260 goto error_release_region;
4261 }
4262
4263 /* load the F/W, read paramaters, and init the H/W */
4264 if (qla1280_initialize_adapter(ha)) {
4265 printk(KERN_INFO "qla1x160: Failed to initialize adapter\n");
4266 goto error_free_irq;
4267 }
4268
4269 /* set our host ID (need to do something about our two IDs) */
4270 host->this_id = ha->bus_settings[0].id;
4271
4272 pci_set_drvdata(pdev, host);
4273
4274 error = scsi_add_host(host, &pdev->dev);
4275 if (error)
4276 goto error_disable_adapter;
4277 scsi_scan_host(host);
4278
4279 return 0;
4280
4281 error_disable_adapter:
4282 qla1280_disable_intrs(ha);
4283 error_free_irq:
4284 free_irq(pdev->irq, ha);
4285 error_release_region:
4286#if MEMORY_MAPPED_IO
4287 iounmap(ha->mmpbase);
4288#else
4289 release_region(host->io_port, 0xff);
4290#endif
4291 error_free_response_ring:
4292 dma_free_coherent(&ha->pdev->dev,
4293 ((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)),
4294 ha->response_ring, ha->response_dma);
4295 error_free_request_ring:
4296 dma_free_coherent(&ha->pdev->dev,
4297 ((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)),
4298 ha->request_ring, ha->request_dma);
4299 error_put_host:
4300 scsi_host_put(host);
4301 error_disable_device:
4302 pci_disable_device(pdev);
4303 error:
4304 return error;
4305}
4306
4307
4308static void
4309qla1280_remove_one(struct pci_dev *pdev)
4310{
4311 struct Scsi_Host *host = pci_get_drvdata(pdev);
4312 struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
4313
4314 scsi_remove_host(host);
4315
4316 qla1280_disable_intrs(ha);
4317
4318 free_irq(pdev->irq, ha);
4319
4320#if MEMORY_MAPPED_IO
4321 iounmap(ha->mmpbase);
4322#else
4323 release_region(host->io_port, 0xff);
4324#endif
4325
4326 dma_free_coherent(&ha->pdev->dev,
4327 ((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))),
4328 ha->request_ring, ha->request_dma);
4329 dma_free_coherent(&ha->pdev->dev,
4330 ((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))),
4331 ha->response_ring, ha->response_dma);
4332
4333 pci_disable_device(pdev);
4334
4335 scsi_host_put(host);
4336}
4337
4338static struct pci_driver qla1280_pci_driver = {
4339 .name = "qla1280",
4340 .id_table = qla1280_pci_tbl,
4341 .probe = qla1280_probe_one,
4342 .remove = qla1280_remove_one,
4343};
4344
4345static int __init
4346qla1280_init(void)
4347{
4348#ifdef MODULE
4349 /*
4350 * If we are called as a module, the qla1280 pointer may not be null
4351 * and it would point to our bootup string, just like on the lilo
4352 * command line. IF not NULL, then process this config string with
4353 * qla1280_setup
4354 *
4355 * Boot time Options
4356 * To add options at boot time add a line to your lilo.conf file like:
4357 * append="qla1280=verbose,max_tags:{{255,255,255,255},{255,255,255,255}}"
4358 * which will result in the first four devices on the first two
4359 * controllers being set to a tagged queue depth of 32.
4360 */
4361 if (qla1280)
4362 qla1280_setup(qla1280);
4363#endif
4364
4365 return pci_register_driver(&qla1280_pci_driver);
4366}
4367
4368static void __exit
4369qla1280_exit(void)
4370{
4371 int i;
4372
4373 pci_unregister_driver(&qla1280_pci_driver);
4374 /* release any allocated firmware images */
4375 for (i = 0; i < QL_NUM_FW_IMAGES; i++) {
4376 release_firmware(qla1280_fw_tbl[i].fw);
4377 qla1280_fw_tbl[i].fw = NULL;
4378 }
4379}
4380
4381module_init(qla1280_init);
4382module_exit(qla1280_exit);
4383
4384MODULE_AUTHOR("Qlogic & Jes Sorensen");
4385MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver");
4386MODULE_LICENSE("GPL");
4387MODULE_FIRMWARE("qlogic/1040.bin");
4388MODULE_FIRMWARE("qlogic/1280.bin");
4389MODULE_FIRMWARE("qlogic/12160.bin");
4390MODULE_VERSION(QLA1280_VERSION);
1// SPDX-License-Identifier: GPL-2.0-or-later
2/******************************************************************************
3* QLOGIC LINUX SOFTWARE
4*
5* QLogic QLA1280 (Ultra2) and QLA12160 (Ultra3) SCSI driver
6* Copyright (C) 2000 Qlogic Corporation (www.qlogic.com)
7* Copyright (C) 2001-2004 Jes Sorensen, Wild Open Source Inc.
8* Copyright (C) 2003-2004 Christoph Hellwig
9*
10******************************************************************************/
11#define QLA1280_VERSION "3.27.1"
12/*****************************************************************************
13 Revision History:
14 Rev 3.27.1, February 8, 2010, Michael Reed
15 - Retain firmware image for error recovery.
16 Rev 3.27, February 10, 2009, Michael Reed
17 - General code cleanup.
18 - Improve error recovery.
19 Rev 3.26, January 16, 2006 Jes Sorensen
20 - Ditch all < 2.6 support
21 Rev 3.25.1, February 10, 2005 Christoph Hellwig
22 - use pci_map_single to map non-S/G requests
23 - remove qla1280_proc_info
24 Rev 3.25, September 28, 2004, Christoph Hellwig
25 - add support for ISP1020/1040
26 - don't include "scsi.h" anymore for 2.6.x
27 Rev 3.24.4 June 7, 2004 Christoph Hellwig
28 - restructure firmware loading, cleanup initialization code
29 - prepare support for ISP1020/1040 chips
30 Rev 3.24.3 January 19, 2004, Jes Sorensen
31 - Handle PCI DMA mask settings correctly
32 - Correct order of error handling in probe_one, free_irq should not
33 be called if request_irq failed
34 Rev 3.24.2 January 19, 2004, James Bottomley & Andrew Vasquez
35 - Big endian fixes (James)
36 - Remove bogus IOCB content on zero data transfer commands (Andrew)
37 Rev 3.24.1 January 5, 2004, Jes Sorensen
38 - Initialize completion queue to avoid OOPS on probe
39 - Handle interrupts during mailbox testing
40 Rev 3.24 November 17, 2003, Christoph Hellwig
41 - use struct list_head for completion queue
42 - avoid old Scsi_FOO typedefs
43 - cleanup 2.4 compat glue a bit
44 - use <scsi/scsi_*.h> headers on 2.6 instead of "scsi.h"
45 - make initialization for memory mapped vs port I/O more similar
46 - remove broken pci config space manipulation
47 - kill more cruft
48 - this is an almost perfect 2.6 scsi driver now! ;)
49 Rev 3.23.39 December 17, 2003, Jes Sorensen
50 - Delete completion queue from srb if mailbox command failed to
51 to avoid qla1280_done completeting qla1280_error_action's
52 obsolete context
53 - Reduce arguments for qla1280_done
54 Rev 3.23.38 October 18, 2003, Christoph Hellwig
55 - Convert to new-style hotplugable driver for 2.6
56 - Fix missing scsi_unregister/scsi_host_put on HBA removal
57 - Kill some more cruft
58 Rev 3.23.37 October 1, 2003, Jes Sorensen
59 - Make MMIO depend on CONFIG_X86_VISWS instead of yet another
60 random CONFIG option
61 - Clean up locking in probe path
62 Rev 3.23.36 October 1, 2003, Christoph Hellwig
63 - queuecommand only ever receives new commands - clear flags
64 - Reintegrate lost fixes from Linux 2.5
65 Rev 3.23.35 August 14, 2003, Jes Sorensen
66 - Build against 2.6
67 Rev 3.23.34 July 23, 2003, Jes Sorensen
68 - Remove pointless TRUE/FALSE macros
69 - Clean up vchan handling
70 Rev 3.23.33 July 3, 2003, Jes Sorensen
71 - Don't define register access macros before define determining MMIO.
72 This just happened to work out on ia64 but not elsewhere.
73 - Don't try and read from the card while it is in reset as
74 it won't respond and causes an MCA
75 Rev 3.23.32 June 23, 2003, Jes Sorensen
76 - Basic support for boot time arguments
77 Rev 3.23.31 June 8, 2003, Jes Sorensen
78 - Reduce boot time messages
79 Rev 3.23.30 June 6, 2003, Jes Sorensen
80 - Do not enable sync/wide/ppr before it has been determined
81 that the target device actually supports it
82 - Enable DMA arbitration for multi channel controllers
83 Rev 3.23.29 June 3, 2003, Jes Sorensen
84 - Port to 2.5.69
85 Rev 3.23.28 June 3, 2003, Jes Sorensen
86 - Eliminate duplicate marker commands on bus resets
87 - Handle outstanding commands appropriately on bus/device resets
88 Rev 3.23.27 May 28, 2003, Jes Sorensen
89 - Remove bogus input queue code, let the Linux SCSI layer do the work
90 - Clean up NVRAM handling, only read it once from the card
91 - Add a number of missing default nvram parameters
92 Rev 3.23.26 Beta May 28, 2003, Jes Sorensen
93 - Use completion queue for mailbox commands instead of busy wait
94 Rev 3.23.25 Beta May 27, 2003, James Bottomley
95 - Migrate to use new error handling code
96 Rev 3.23.24 Beta May 21, 2003, James Bottomley
97 - Big endian support
98 - Cleanup data direction code
99 Rev 3.23.23 Beta May 12, 2003, Jes Sorensen
100 - Switch to using MMIO instead of PIO
101 Rev 3.23.22 Beta April 15, 2003, Jes Sorensen
102 - Fix PCI parity problem with 12160 during reset.
103 Rev 3.23.21 Beta April 14, 2003, Jes Sorensen
104 - Use pci_map_page()/pci_unmap_page() instead of map_single version.
105 Rev 3.23.20 Beta April 9, 2003, Jes Sorensen
106 - Remove < 2.4.x support
107 - Introduce HOST_LOCK to make the spin lock changes portable.
108 - Remove a bunch of idiotic and unnecessary typedef's
109 - Kill all leftovers of target-mode support which never worked anyway
110 Rev 3.23.19 Beta April 11, 2002, Linus Torvalds
111 - Do qla1280_pci_config() before calling request_irq() and
112 request_region()
113 - Use pci_dma_hi32() to handle upper word of DMA addresses instead
114 of large shifts
115 - Hand correct arguments to free_irq() in case of failure
116 Rev 3.23.18 Beta April 11, 2002, Jes Sorensen
117 - Run source through Lindent and clean up the output
118 Rev 3.23.17 Beta April 11, 2002, Jes Sorensen
119 - Update SCSI firmware to qla1280 v8.15.00 and qla12160 v10.04.32
120 Rev 3.23.16 Beta March 19, 2002, Jes Sorensen
121 - Rely on mailbox commands generating interrupts - do not
122 run qla1280_isr() from ql1280_mailbox_command()
123 - Remove device_reg_t
124 - Integrate ql12160_set_target_parameters() with 1280 version
125 - Make qla1280_setup() non static
126 - Do not call qla1280_check_for_dead_scsi_bus() on every I/O request
127 sent to the card - this command pauses the firmware!!!
128 Rev 3.23.15 Beta March 19, 2002, Jes Sorensen
129 - Clean up qla1280.h - remove obsolete QL_DEBUG_LEVEL_x definitions
130 - Remove a pile of pointless and confusing (srb_t **) and
131 (scsi_lu_t *) typecasts
132 - Explicit mark that we do not use the new error handling (for now)
133 - Remove scsi_qla_host_t and use 'struct' instead
134 - Remove in_abort, watchdog_enabled, dpc, dpc_sched, bios_enabled,
135 pci_64bit_slot flags which weren't used for anything anyway
136 - Grab host->host_lock while calling qla1280_isr() from abort()
137 - Use spin_lock()/spin_unlock() in qla1280_intr_handler() - we
138 do not need to save/restore flags in the interrupt handler
139 - Enable interrupts early (before any mailbox access) in preparation
140 for cleaning up the mailbox handling
141 Rev 3.23.14 Beta March 14, 2002, Jes Sorensen
142 - Further cleanups. Remove all trace of QL_DEBUG_LEVEL_x and replace
143 it with proper use of dprintk().
144 - Make qla1280_print_scsi_cmd() and qla1280_dump_buffer() both take
145 a debug level argument to determine if data is to be printed
146 - Add KERN_* info to printk()
147 Rev 3.23.13 Beta March 14, 2002, Jes Sorensen
148 - Significant cosmetic cleanups
149 - Change debug code to use dprintk() and remove #if mess
150 Rev 3.23.12 Beta March 13, 2002, Jes Sorensen
151 - More cosmetic cleanups, fix places treating return as function
152 - use cpu_relax() in qla1280_debounce_register()
153 Rev 3.23.11 Beta March 13, 2002, Jes Sorensen
154 - Make it compile under 2.5.5
155 Rev 3.23.10 Beta October 1, 2001, Jes Sorensen
156 - Do no typecast short * to long * in QL1280BoardTbl, this
157 broke miserably on big endian boxes
158 Rev 3.23.9 Beta September 30, 2001, Jes Sorensen
159 - Remove pre 2.2 hack for checking for reentrance in interrupt handler
160 - Make data types used to receive from SCSI_{BUS,TCN,LUN}_32
161 unsigned int to match the types from struct scsi_cmnd
162 Rev 3.23.8 Beta September 29, 2001, Jes Sorensen
163 - Remove bogus timer_t typedef from qla1280.h
164 - Remove obsolete pre 2.2 PCI setup code, use proper #define's
165 for PCI_ values, call pci_set_master()
166 - Fix memleak of qla1280_buffer on module unload
167 - Only compile module parsing code #ifdef MODULE - should be
168 changed to use individual MODULE_PARM's later
169 - Remove dummy_buffer that was never modified nor printed
170 - ENTER()/LEAVE() are noops unless QL_DEBUG_LEVEL_3, hence remove
171 #ifdef QL_DEBUG_LEVEL_3/#endif around ENTER()/LEAVE() calls
172 - Remove \r from print statements, this is Linux, not DOS
173 - Remove obsolete QLA1280_{SCSILU,INTR,RING}_{LOCK,UNLOCK}
174 dummy macros
175 - Remove C++ compile hack in header file as Linux driver are not
176 supposed to be compiled as C++
177 - Kill MS_64BITS macro as it makes the code more readable
178 - Remove unnecessary flags.in_interrupts bit
179 Rev 3.23.7 Beta August 20, 2001, Jes Sorensen
180 - Dont' check for set flags on q->q_flag one by one in qla1280_next()
181 - Check whether the interrupt was generated by the QLA1280 before
182 doing any processing
183 - qla1280_status_entry(): Only zero out part of sense_buffer that
184 is not being copied into
185 - Remove more superflouous typecasts
186 - qla1280_32bit_start_scsi() replace home-brew memcpy() with memcpy()
187 Rev 3.23.6 Beta August 20, 2001, Tony Luck, Intel
188 - Don't walk the entire list in qla1280_putq_t() just to directly
189 grab the pointer to the last element afterwards
190 Rev 3.23.5 Beta August 9, 2001, Jes Sorensen
191 - Don't use IRQF_DISABLED, it's use is deprecated for this kinda driver
192 Rev 3.23.4 Beta August 8, 2001, Jes Sorensen
193 - Set dev->max_sectors to 1024
194 Rev 3.23.3 Beta August 6, 2001, Jes Sorensen
195 - Provide compat macros for pci_enable_device(), pci_find_subsys()
196 and scsi_set_pci_device()
197 - Call scsi_set_pci_device() for all devices
198 - Reduce size of kernel version dependent device probe code
199 - Move duplicate probe/init code to separate function
200 - Handle error if qla1280_mem_alloc() fails
201 - Kill OFFSET() macro and use Linux's PCI definitions instead
202 - Kill private structure defining PCI config space (struct config_reg)
203 - Only allocate I/O port region if not in MMIO mode
204 - Remove duplicate (unused) sanity check of sife of srb_t
205 Rev 3.23.2 Beta August 6, 2001, Jes Sorensen
206 - Change home-brew memset() implementations to use memset()
207 - Remove all references to COMTRACE() - accessing a PC's COM2 serial
208 port directly is not legal under Linux.
209 Rev 3.23.1 Beta April 24, 2001, Jes Sorensen
210 - Remove pre 2.2 kernel support
211 - clean up 64 bit DMA setting to use 2.4 API (provide backwards compat)
212 - Fix MMIO access to use readl/writel instead of directly
213 dereferencing pointers
214 - Nuke MSDOS debugging code
215 - Change true/false data types to int from uint8_t
216 - Use int for counters instead of uint8_t etc.
217 - Clean up size & byte order conversion macro usage
218 Rev 3.23 Beta January 11, 2001 BN Qlogic
219 - Added check of device_id when handling non
220 QLA12160s during detect().
221 Rev 3.22 Beta January 5, 2001 BN Qlogic
222 - Changed queue_task() to schedule_task()
223 for kernels 2.4.0 and higher.
224 Note: 2.4.0-testxx kernels released prior to
225 the actual 2.4.0 kernel release on January 2001
226 will get compile/link errors with schedule_task().
227 Please update your kernel to released 2.4.0 level,
228 or comment lines in this file flagged with 3.22
229 to resolve compile/link error of schedule_task().
230 - Added -DCONFIG_SMP in addition to -D__SMP__
231 in Makefile for 2.4.0 builds of driver as module.
232 Rev 3.21 Beta January 4, 2001 BN Qlogic
233 - Changed criteria of 64/32 Bit mode of HBA
234 operation according to BITS_PER_LONG rather
235 than HBA's NVRAM setting of >4Gig memory bit;
236 so that the HBA auto-configures without the need
237 to setup each system individually.
238 Rev 3.20 Beta December 5, 2000 BN Qlogic
239 - Added priority handling to IA-64 onboard SCSI
240 ISP12160 chip for kernels greater than 2.3.18.
241 - Added irqrestore for qla1280_intr_handler.
242 - Enabled /proc/scsi/qla1280 interface.
243 - Clear /proc/scsi/qla1280 counters in detect().
244 Rev 3.19 Beta October 13, 2000 BN Qlogic
245 - Declare driver_template for new kernel
246 (2.4.0 and greater) scsi initialization scheme.
247 - Update /proc/scsi entry for 2.3.18 kernels and
248 above as qla1280
249 Rev 3.18 Beta October 10, 2000 BN Qlogic
250 - Changed scan order of adapters to map
251 the QLA12160 followed by the QLA1280.
252 Rev 3.17 Beta September 18, 2000 BN Qlogic
253 - Removed warnings for 32 bit 2.4.x compiles
254 - Corrected declared size for request and response
255 DMA addresses that are kept in each ha
256 Rev. 3.16 Beta August 25, 2000 BN Qlogic
257 - Corrected 64 bit addressing issue on IA-64
258 where the upper 32 bits were not properly
259 passed to the RISC engine.
260 Rev. 3.15 Beta August 22, 2000 BN Qlogic
261 - Modified qla1280_setup_chip to properly load
262 ISP firmware for greater that 4 Gig memory on IA-64
263 Rev. 3.14 Beta August 16, 2000 BN Qlogic
264 - Added setting of dma_mask to full 64 bit
265 if flags.enable_64bit_addressing is set in NVRAM
266 Rev. 3.13 Beta August 16, 2000 BN Qlogic
267 - Use new PCI DMA mapping APIs for 2.4.x kernel
268 Rev. 3.12 July 18, 2000 Redhat & BN Qlogic
269 - Added check of pci_enable_device to detect() for 2.3.x
270 - Use pci_resource_start() instead of
271 pdev->resource[0].start in detect() for 2.3.x
272 - Updated driver version
273 Rev. 3.11 July 14, 2000 BN Qlogic
274 - Updated SCSI Firmware to following versions:
275 qla1x80: 8.13.08
276 qla1x160: 10.04.08
277 - Updated driver version to 3.11
278 Rev. 3.10 June 23, 2000 BN Qlogic
279 - Added filtering of AMI SubSys Vendor ID devices
280 Rev. 3.9
281 - DEBUG_QLA1280 undefined and new version BN Qlogic
282 Rev. 3.08b May 9, 2000 MD Dell
283 - Added logic to check against AMI subsystem vendor ID
284 Rev. 3.08 May 4, 2000 DG Qlogic
285 - Added logic to check for PCI subsystem ID.
286 Rev. 3.07 Apr 24, 2000 DG & BN Qlogic
287 - Updated SCSI Firmware to following versions:
288 qla12160: 10.01.19
289 qla1280: 8.09.00
290 Rev. 3.06 Apr 12, 2000 DG & BN Qlogic
291 - Internal revision; not released
292 Rev. 3.05 Mar 28, 2000 DG & BN Qlogic
293 - Edit correction for virt_to_bus and PROC.
294 Rev. 3.04 Mar 28, 2000 DG & BN Qlogic
295 - Merge changes from ia64 port.
296 Rev. 3.03 Mar 28, 2000 BN Qlogic
297 - Increase version to reflect new code drop with compile fix
298 of issue with inclusion of linux/spinlock for 2.3 kernels
299 Rev. 3.02 Mar 15, 2000 BN Qlogic
300 - Merge qla1280_proc_info from 2.10 code base
301 Rev. 3.01 Feb 10, 2000 BN Qlogic
302 - Corrected code to compile on a 2.2.x kernel.
303 Rev. 3.00 Jan 17, 2000 DG Qlogic
304 - Added 64-bit support.
305 Rev. 2.07 Nov 9, 1999 DG Qlogic
306 - Added new routine to set target parameters for ISP12160.
307 Rev. 2.06 Sept 10, 1999 DG Qlogic
308 - Added support for ISP12160 Ultra 3 chip.
309 Rev. 2.03 August 3, 1999 Fred Lewis, Intel DuPont
310 - Modified code to remove errors generated when compiling with
311 Cygnus IA64 Compiler.
312 - Changed conversion of pointers to unsigned longs instead of integers.
313 - Changed type of I/O port variables from uint32_t to unsigned long.
314 - Modified OFFSET macro to work with 64-bit as well as 32-bit.
315 - Changed sprintf and printk format specifiers for pointers to %p.
316 - Changed some int to long type casts where needed in sprintf & printk.
317 - Added l modifiers to sprintf and printk format specifiers for longs.
318 - Removed unused local variables.
319 Rev. 1.20 June 8, 1999 DG, Qlogic
320 Changes to support RedHat release 6.0 (kernel 2.2.5).
321 - Added SCSI exclusive access lock (io_request_lock) when accessing
322 the adapter.
323 - Added changes for the new LINUX interface template. Some new error
324 handling routines have been added to the template, but for now we
325 will use the old ones.
326 - Initial Beta Release.
327*****************************************************************************/
328
329
330#include <linux/module.h>
331
332#include <linux/types.h>
333#include <linux/string.h>
334#include <linux/errno.h>
335#include <linux/kernel.h>
336#include <linux/ioport.h>
337#include <linux/delay.h>
338#include <linux/timer.h>
339#include <linux/pci.h>
340#include <linux/proc_fs.h>
341#include <linux/stat.h>
342#include <linux/pci_ids.h>
343#include <linux/interrupt.h>
344#include <linux/init.h>
345#include <linux/dma-mapping.h>
346#include <linux/firmware.h>
347
348#include <asm/io.h>
349#include <asm/irq.h>
350#include <asm/byteorder.h>
351#include <asm/processor.h>
352#include <asm/types.h>
353
354#include <scsi/scsi.h>
355#include <scsi/scsi_cmnd.h>
356#include <scsi/scsi_device.h>
357#include <scsi/scsi_host.h>
358#include <scsi/scsi_tcq.h>
359
360
361/*
362 * Compile time Options:
363 * 0 - Disable and 1 - Enable
364 */
365#define DEBUG_QLA1280_INTR 0
366#define DEBUG_PRINT_NVRAM 0
367#define DEBUG_QLA1280 0
368
369#define MEMORY_MAPPED_IO 1
370
371#include "qla1280.h"
372
373#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
374#define QLA_64BIT_PTR 1
375#endif
376
377#define NVRAM_DELAY() udelay(500) /* 2 microseconds */
378
379#define IS_ISP1040(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020)
380#define IS_ISP1x40(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020 || \
381 ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1240)
382#define IS_ISP1x160(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP10160 || \
383 ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP12160)
384
385
386static int qla1280_probe_one(struct pci_dev *, const struct pci_device_id *);
387static void qla1280_remove_one(struct pci_dev *);
388
389/*
390 * QLogic Driver Support Function Prototypes.
391 */
392static void qla1280_done(struct scsi_qla_host *);
393static int qla1280_get_token(char *);
394static int qla1280_setup(char *s) __init;
395
396/*
397 * QLogic ISP1280 Hardware Support Function Prototypes.
398 */
399static int qla1280_load_firmware(struct scsi_qla_host *);
400static int qla1280_init_rings(struct scsi_qla_host *);
401static int qla1280_nvram_config(struct scsi_qla_host *);
402static int qla1280_mailbox_command(struct scsi_qla_host *,
403 uint8_t, uint16_t *);
404static int qla1280_bus_reset(struct scsi_qla_host *, int);
405static int qla1280_device_reset(struct scsi_qla_host *, int, int);
406static int qla1280_abort_command(struct scsi_qla_host *, struct srb *, int);
407static int qla1280_abort_isp(struct scsi_qla_host *);
408#ifdef QLA_64BIT_PTR
409static int qla1280_64bit_start_scsi(struct scsi_qla_host *, struct srb *);
410#else
411static int qla1280_32bit_start_scsi(struct scsi_qla_host *, struct srb *);
412#endif
413static void qla1280_nv_write(struct scsi_qla_host *, uint16_t);
414static void qla1280_poll(struct scsi_qla_host *);
415static void qla1280_reset_adapter(struct scsi_qla_host *);
416static void qla1280_marker(struct scsi_qla_host *, int, int, int, u8);
417static void qla1280_isp_cmd(struct scsi_qla_host *);
418static void qla1280_isr(struct scsi_qla_host *, struct list_head *);
419static void qla1280_rst_aen(struct scsi_qla_host *);
420static void qla1280_status_entry(struct scsi_qla_host *, struct response *,
421 struct list_head *);
422static void qla1280_error_entry(struct scsi_qla_host *, struct response *,
423 struct list_head *);
424static uint16_t qla1280_get_nvram_word(struct scsi_qla_host *, uint32_t);
425static uint16_t qla1280_nvram_request(struct scsi_qla_host *, uint32_t);
426static uint16_t qla1280_debounce_register(volatile uint16_t __iomem *);
427static request_t *qla1280_req_pkt(struct scsi_qla_host *);
428static int qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *,
429 unsigned int);
430static void qla1280_get_target_parameters(struct scsi_qla_host *,
431 struct scsi_device *);
432static int qla1280_set_target_parameters(struct scsi_qla_host *, int, int);
433
434
435static struct qla_driver_setup driver_setup;
436
437/*
438 * convert scsi data direction to request_t control flags
439 */
440static inline uint16_t
441qla1280_data_direction(struct scsi_cmnd *cmnd)
442{
443 switch(cmnd->sc_data_direction) {
444 case DMA_FROM_DEVICE:
445 return BIT_5;
446 case DMA_TO_DEVICE:
447 return BIT_6;
448 case DMA_BIDIRECTIONAL:
449 return BIT_5 | BIT_6;
450 /*
451 * We could BUG() on default here if one of the four cases aren't
452 * met, but then again if we receive something like that from the
453 * SCSI layer we have more serious problems. This shuts up GCC.
454 */
455 case DMA_NONE:
456 default:
457 return 0;
458 }
459}
460
461#if DEBUG_QLA1280
462static void __qla1280_print_scsi_cmd(struct scsi_cmnd * cmd);
463static void __qla1280_dump_buffer(char *, int);
464#endif
465
466
467/*
468 * insmod needs to find the variable and make it point to something
469 */
470#ifdef MODULE
471static char *qla1280;
472
473/* insmod qla1280 options=verbose" */
474module_param(qla1280, charp, 0);
475#else
476__setup("qla1280=", qla1280_setup);
477#endif
478
479
480/*
481 * We use the scsi_pointer structure that's included with each scsi_command
482 * to overlay our struct srb over it. qla1280_init() checks that a srb is not
483 * bigger than a scsi_pointer.
484 */
485
486#define CMD_SP(Cmnd) &Cmnd->SCp
487#define CMD_CDBLEN(Cmnd) Cmnd->cmd_len
488#define CMD_CDBP(Cmnd) Cmnd->cmnd
489#define CMD_SNSP(Cmnd) Cmnd->sense_buffer
490#define CMD_SNSLEN(Cmnd) SCSI_SENSE_BUFFERSIZE
491#define CMD_RESULT(Cmnd) Cmnd->result
492#define CMD_HANDLE(Cmnd) Cmnd->host_scribble
493#define CMD_REQUEST(Cmnd) Cmnd->request->cmd
494
495#define CMD_HOST(Cmnd) Cmnd->device->host
496#define SCSI_BUS_32(Cmnd) Cmnd->device->channel
497#define SCSI_TCN_32(Cmnd) Cmnd->device->id
498#define SCSI_LUN_32(Cmnd) Cmnd->device->lun
499
500
501/*****************************************/
502/* ISP Boards supported by this driver */
503/*****************************************/
504
505struct qla_boards {
506 char *name; /* Board ID String */
507 int numPorts; /* Number of SCSI ports */
508 int fw_index; /* index into qla1280_fw_tbl for firmware */
509};
510
511/* NOTE: the last argument in each entry is used to index ql1280_board_tbl */
512static struct pci_device_id qla1280_pci_tbl[] = {
513 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP12160,
514 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
515 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1020,
516 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
517 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1080,
518 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
519 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1240,
520 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
521 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1280,
522 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
523 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP10160,
524 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
525 {0,}
526};
527MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl);
528
529DEFINE_MUTEX(qla1280_firmware_mutex);
530
531struct qla_fw {
532 char *fwname;
533 const struct firmware *fw;
534};
535
536#define QL_NUM_FW_IMAGES 3
537
538struct qla_fw qla1280_fw_tbl[QL_NUM_FW_IMAGES] = {
539 {"qlogic/1040.bin", NULL}, /* image 0 */
540 {"qlogic/1280.bin", NULL}, /* image 1 */
541 {"qlogic/12160.bin", NULL}, /* image 2 */
542};
543
544/* NOTE: Order of boards in this table must match order in qla1280_pci_tbl */
545static struct qla_boards ql1280_board_tbl[] = {
546 {.name = "QLA12160", .numPorts = 2, .fw_index = 2},
547 {.name = "QLA1040" , .numPorts = 1, .fw_index = 0},
548 {.name = "QLA1080" , .numPorts = 1, .fw_index = 1},
549 {.name = "QLA1240" , .numPorts = 2, .fw_index = 1},
550 {.name = "QLA1280" , .numPorts = 2, .fw_index = 1},
551 {.name = "QLA10160", .numPorts = 1, .fw_index = 2},
552 {.name = " ", .numPorts = 0, .fw_index = -1},
553};
554
555static int qla1280_verbose = 1;
556
557#if DEBUG_QLA1280
558static int ql_debug_level = 1;
559#define dprintk(level, format, a...) \
560 do { if (ql_debug_level >= level) printk(KERN_ERR format, ##a); } while(0)
561#define qla1280_dump_buffer(level, buf, size) \
562 if (ql_debug_level >= level) __qla1280_dump_buffer(buf, size)
563#define qla1280_print_scsi_cmd(level, cmd) \
564 if (ql_debug_level >= level) __qla1280_print_scsi_cmd(cmd)
565#else
566#define ql_debug_level 0
567#define dprintk(level, format, a...) do{}while(0)
568#define qla1280_dump_buffer(a, b, c) do{}while(0)
569#define qla1280_print_scsi_cmd(a, b) do{}while(0)
570#endif
571
572#define ENTER(x) dprintk(3, "qla1280 : Entering %s()\n", x);
573#define LEAVE(x) dprintk(3, "qla1280 : Leaving %s()\n", x);
574#define ENTER_INTR(x) dprintk(4, "qla1280 : Entering %s()\n", x);
575#define LEAVE_INTR(x) dprintk(4, "qla1280 : Leaving %s()\n", x);
576
577
578static int qla1280_read_nvram(struct scsi_qla_host *ha)
579{
580 uint16_t *wptr;
581 uint8_t chksum;
582 int cnt, i;
583 struct nvram *nv;
584
585 ENTER("qla1280_read_nvram");
586
587 if (driver_setup.no_nvram)
588 return 1;
589
590 printk(KERN_INFO "scsi(%ld): Reading NVRAM\n", ha->host_no);
591
592 wptr = (uint16_t *)&ha->nvram;
593 nv = &ha->nvram;
594 chksum = 0;
595 for (cnt = 0; cnt < 3; cnt++) {
596 *wptr = qla1280_get_nvram_word(ha, cnt);
597 chksum += *wptr & 0xff;
598 chksum += (*wptr >> 8) & 0xff;
599 wptr++;
600 }
601
602 if (nv->id0 != 'I' || nv->id1 != 'S' ||
603 nv->id2 != 'P' || nv->id3 != ' ' || nv->version < 1) {
604 dprintk(2, "Invalid nvram ID or version!\n");
605 chksum = 1;
606 } else {
607 for (; cnt < sizeof(struct nvram); cnt++) {
608 *wptr = qla1280_get_nvram_word(ha, cnt);
609 chksum += *wptr & 0xff;
610 chksum += (*wptr >> 8) & 0xff;
611 wptr++;
612 }
613 }
614
615 dprintk(3, "qla1280_read_nvram: NVRAM Magic ID= %c %c %c %02x"
616 " version %i\n", nv->id0, nv->id1, nv->id2, nv->id3,
617 nv->version);
618
619
620 if (chksum) {
621 if (!driver_setup.no_nvram)
622 printk(KERN_WARNING "scsi(%ld): Unable to identify or "
623 "validate NVRAM checksum, using default "
624 "settings\n", ha->host_no);
625 ha->nvram_valid = 0;
626 } else
627 ha->nvram_valid = 1;
628
629 /* The firmware interface is, um, interesting, in that the
630 * actual firmware image on the chip is little endian, thus,
631 * the process of taking that image to the CPU would end up
632 * little endian. However, the firmware interface requires it
633 * to be read a word (two bytes) at a time.
634 *
635 * The net result of this would be that the word (and
636 * doubleword) quantites in the firmware would be correct, but
637 * the bytes would be pairwise reversed. Since most of the
638 * firmware quantites are, in fact, bytes, we do an extra
639 * le16_to_cpu() in the firmware read routine.
640 *
641 * The upshot of all this is that the bytes in the firmware
642 * are in the correct places, but the 16 and 32 bit quantites
643 * are still in little endian format. We fix that up below by
644 * doing extra reverses on them */
645 nv->isp_parameter = cpu_to_le16(nv->isp_parameter);
646 nv->firmware_feature.w = cpu_to_le16(nv->firmware_feature.w);
647 for(i = 0; i < MAX_BUSES; i++) {
648 nv->bus[i].selection_timeout = cpu_to_le16(nv->bus[i].selection_timeout);
649 nv->bus[i].max_queue_depth = cpu_to_le16(nv->bus[i].max_queue_depth);
650 }
651 dprintk(1, "qla1280_read_nvram: Completed Reading NVRAM\n");
652 LEAVE("qla1280_read_nvram");
653
654 return chksum;
655}
656
657/**************************************************************************
658 * qla1280_info
659 * Return a string describing the driver.
660 **************************************************************************/
661static const char *
662qla1280_info(struct Scsi_Host *host)
663{
664 static char qla1280_scsi_name_buffer[125];
665 char *bp;
666 struct scsi_qla_host *ha;
667 struct qla_boards *bdp;
668
669 bp = &qla1280_scsi_name_buffer[0];
670 ha = (struct scsi_qla_host *)host->hostdata;
671 bdp = &ql1280_board_tbl[ha->devnum];
672 memset(bp, 0, sizeof(qla1280_scsi_name_buffer));
673
674 sprintf (bp,
675 "QLogic %s PCI to SCSI Host Adapter\n"
676 " Firmware version: %2d.%02d.%02d, Driver version %s",
677 &bdp->name[0], ha->fwver1, ha->fwver2, ha->fwver3,
678 QLA1280_VERSION);
679 return bp;
680}
681
682/**************************************************************************
683 * qla1280_queuecommand
684 * Queue a command to the controller.
685 *
686 * Note:
687 * The mid-level driver tries to ensures that queuecommand never gets invoked
688 * concurrently with itself or the interrupt handler (although the
689 * interrupt handler may call this routine as part of request-completion
690 * handling). Unfortunely, it sometimes calls the scheduler in interrupt
691 * context which is a big NO! NO!.
692 **************************************************************************/
693static int
694qla1280_queuecommand_lck(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
695{
696 struct Scsi_Host *host = cmd->device->host;
697 struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
698 struct srb *sp = (struct srb *)CMD_SP(cmd);
699 int status;
700
701 cmd->scsi_done = fn;
702 sp->cmd = cmd;
703 sp->flags = 0;
704 sp->wait = NULL;
705 CMD_HANDLE(cmd) = (unsigned char *)NULL;
706
707 qla1280_print_scsi_cmd(5, cmd);
708
709#ifdef QLA_64BIT_PTR
710 /*
711 * Using 64 bit commands if the PCI bridge doesn't support it is a
712 * bit wasteful, however this should really only happen if one's
713 * PCI controller is completely broken, like the BCM1250. For
714 * sane hardware this is not an issue.
715 */
716 status = qla1280_64bit_start_scsi(ha, sp);
717#else
718 status = qla1280_32bit_start_scsi(ha, sp);
719#endif
720 return status;
721}
722
723static DEF_SCSI_QCMD(qla1280_queuecommand)
724
725enum action {
726 ABORT_COMMAND,
727 DEVICE_RESET,
728 BUS_RESET,
729 ADAPTER_RESET,
730};
731
732
733static void qla1280_mailbox_timeout(struct timer_list *t)
734{
735 struct scsi_qla_host *ha = from_timer(ha, t, mailbox_timer);
736 struct device_reg __iomem *reg;
737 reg = ha->iobase;
738
739 ha->mailbox_out[0] = RD_REG_WORD(®->mailbox0);
740 printk(KERN_ERR "scsi(%ld): mailbox timed out, mailbox0 %04x, "
741 "ictrl %04x, istatus %04x\n", ha->host_no, ha->mailbox_out[0],
742 RD_REG_WORD(®->ictrl), RD_REG_WORD(®->istatus));
743 complete(ha->mailbox_wait);
744}
745
746static int
747_qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp,
748 struct completion *wait)
749{
750 int status = FAILED;
751 struct scsi_cmnd *cmd = sp->cmd;
752
753 spin_unlock_irq(ha->host->host_lock);
754 wait_for_completion_timeout(wait, 4*HZ);
755 spin_lock_irq(ha->host->host_lock);
756 sp->wait = NULL;
757 if(CMD_HANDLE(cmd) == COMPLETED_HANDLE) {
758 status = SUCCESS;
759 (*cmd->scsi_done)(cmd);
760 }
761 return status;
762}
763
764static int
765qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp)
766{
767 DECLARE_COMPLETION_ONSTACK(wait);
768
769 sp->wait = &wait;
770 return _qla1280_wait_for_single_command(ha, sp, &wait);
771}
772
773static int
774qla1280_wait_for_pending_commands(struct scsi_qla_host *ha, int bus, int target)
775{
776 int cnt;
777 int status;
778 struct srb *sp;
779 struct scsi_cmnd *cmd;
780
781 status = SUCCESS;
782
783 /*
784 * Wait for all commands with the designated bus/target
785 * to be completed by the firmware
786 */
787 for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
788 sp = ha->outstanding_cmds[cnt];
789 if (sp) {
790 cmd = sp->cmd;
791
792 if (bus >= 0 && SCSI_BUS_32(cmd) != bus)
793 continue;
794 if (target >= 0 && SCSI_TCN_32(cmd) != target)
795 continue;
796
797 status = qla1280_wait_for_single_command(ha, sp);
798 if (status == FAILED)
799 break;
800 }
801 }
802 return status;
803}
804
805/**************************************************************************
806 * qla1280_error_action
807 * The function will attempt to perform a specified error action and
808 * wait for the results (or time out).
809 *
810 * Input:
811 * cmd = Linux SCSI command packet of the command that cause the
812 * bus reset.
813 * action = error action to take (see action_t)
814 *
815 * Returns:
816 * SUCCESS or FAILED
817 *
818 **************************************************************************/
819static int
820qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
821{
822 struct scsi_qla_host *ha;
823 int bus, target, lun;
824 struct srb *sp;
825 int i, found;
826 int result=FAILED;
827 int wait_for_bus=-1;
828 int wait_for_target = -1;
829 DECLARE_COMPLETION_ONSTACK(wait);
830
831 ENTER("qla1280_error_action");
832
833 ha = (struct scsi_qla_host *)(CMD_HOST(cmd)->hostdata);
834 sp = (struct srb *)CMD_SP(cmd);
835 bus = SCSI_BUS_32(cmd);
836 target = SCSI_TCN_32(cmd);
837 lun = SCSI_LUN_32(cmd);
838
839 dprintk(4, "error_action %i, istatus 0x%04x\n", action,
840 RD_REG_WORD(&ha->iobase->istatus));
841
842 dprintk(4, "host_cmd 0x%04x, ictrl 0x%04x, jiffies %li\n",
843 RD_REG_WORD(&ha->iobase->host_cmd),
844 RD_REG_WORD(&ha->iobase->ictrl), jiffies);
845
846 if (qla1280_verbose)
847 printk(KERN_INFO "scsi(%li): Resetting Cmnd=0x%p, "
848 "Handle=0x%p, action=0x%x\n",
849 ha->host_no, cmd, CMD_HANDLE(cmd), action);
850
851 /*
852 * Check to see if we have the command in the outstanding_cmds[]
853 * array. If not then it must have completed before this error
854 * action was initiated. If the error_action isn't ABORT_COMMAND
855 * then the driver must proceed with the requested action.
856 */
857 found = -1;
858 for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
859 if (sp == ha->outstanding_cmds[i]) {
860 found = i;
861 sp->wait = &wait; /* we'll wait for it to complete */
862 break;
863 }
864 }
865
866 if (found < 0) { /* driver doesn't have command */
867 result = SUCCESS;
868 if (qla1280_verbose) {
869 printk(KERN_INFO
870 "scsi(%ld:%d:%d:%d): specified command has "
871 "already completed.\n", ha->host_no, bus,
872 target, lun);
873 }
874 }
875
876 switch (action) {
877
878 case ABORT_COMMAND:
879 dprintk(1, "qla1280: RISC aborting command\n");
880 /*
881 * The abort might fail due to race when the host_lock
882 * is released to issue the abort. As such, we
883 * don't bother to check the return status.
884 */
885 if (found >= 0)
886 qla1280_abort_command(ha, sp, found);
887 break;
888
889 case DEVICE_RESET:
890 if (qla1280_verbose)
891 printk(KERN_INFO
892 "scsi(%ld:%d:%d:%d): Queueing device reset "
893 "command.\n", ha->host_no, bus, target, lun);
894 if (qla1280_device_reset(ha, bus, target) == 0) {
895 /* issued device reset, set wait conditions */
896 wait_for_bus = bus;
897 wait_for_target = target;
898 }
899 break;
900
901 case BUS_RESET:
902 if (qla1280_verbose)
903 printk(KERN_INFO "qla1280(%ld:%d): Issued bus "
904 "reset.\n", ha->host_no, bus);
905 if (qla1280_bus_reset(ha, bus) == 0) {
906 /* issued bus reset, set wait conditions */
907 wait_for_bus = bus;
908 }
909 break;
910
911 case ADAPTER_RESET:
912 default:
913 if (qla1280_verbose) {
914 printk(KERN_INFO
915 "scsi(%ld): Issued ADAPTER RESET\n",
916 ha->host_no);
917 printk(KERN_INFO "scsi(%ld): I/O processing will "
918 "continue automatically\n", ha->host_no);
919 }
920 ha->flags.reset_active = 1;
921
922 if (qla1280_abort_isp(ha) != 0) { /* it's dead */
923 result = FAILED;
924 }
925
926 ha->flags.reset_active = 0;
927 }
928
929 /*
930 * At this point, the host_lock has been released and retaken
931 * by the issuance of the mailbox command.
932 * Wait for the command passed in by the mid-layer if it
933 * was found by the driver. It might have been returned
934 * between eh recovery steps, hence the check of the "found"
935 * variable.
936 */
937
938 if (found >= 0)
939 result = _qla1280_wait_for_single_command(ha, sp, &wait);
940
941 if (action == ABORT_COMMAND && result != SUCCESS) {
942 printk(KERN_WARNING
943 "scsi(%li:%i:%i:%i): "
944 "Unable to abort command!\n",
945 ha->host_no, bus, target, lun);
946 }
947
948 /*
949 * If the command passed in by the mid-layer has been
950 * returned by the board, then wait for any additional
951 * commands which are supposed to complete based upon
952 * the error action.
953 *
954 * All commands are unconditionally returned during a
955 * call to qla1280_abort_isp(), ADAPTER_RESET. No need
956 * to wait for them.
957 */
958 if (result == SUCCESS && wait_for_bus >= 0) {
959 result = qla1280_wait_for_pending_commands(ha,
960 wait_for_bus, wait_for_target);
961 }
962
963 dprintk(1, "RESET returning %d\n", result);
964
965 LEAVE("qla1280_error_action");
966 return result;
967}
968
969/**************************************************************************
970 * qla1280_abort
971 * Abort the specified SCSI command(s).
972 **************************************************************************/
973static int
974qla1280_eh_abort(struct scsi_cmnd * cmd)
975{
976 int rc;
977
978 spin_lock_irq(cmd->device->host->host_lock);
979 rc = qla1280_error_action(cmd, ABORT_COMMAND);
980 spin_unlock_irq(cmd->device->host->host_lock);
981
982 return rc;
983}
984
985/**************************************************************************
986 * qla1280_device_reset
987 * Reset the specified SCSI device
988 **************************************************************************/
989static int
990qla1280_eh_device_reset(struct scsi_cmnd *cmd)
991{
992 int rc;
993
994 spin_lock_irq(cmd->device->host->host_lock);
995 rc = qla1280_error_action(cmd, DEVICE_RESET);
996 spin_unlock_irq(cmd->device->host->host_lock);
997
998 return rc;
999}
1000
1001/**************************************************************************
1002 * qla1280_bus_reset
1003 * Reset the specified bus.
1004 **************************************************************************/
1005static int
1006qla1280_eh_bus_reset(struct scsi_cmnd *cmd)
1007{
1008 int rc;
1009
1010 spin_lock_irq(cmd->device->host->host_lock);
1011 rc = qla1280_error_action(cmd, BUS_RESET);
1012 spin_unlock_irq(cmd->device->host->host_lock);
1013
1014 return rc;
1015}
1016
1017/**************************************************************************
1018 * qla1280_adapter_reset
1019 * Reset the specified adapter (both channels)
1020 **************************************************************************/
1021static int
1022qla1280_eh_adapter_reset(struct scsi_cmnd *cmd)
1023{
1024 int rc;
1025
1026 spin_lock_irq(cmd->device->host->host_lock);
1027 rc = qla1280_error_action(cmd, ADAPTER_RESET);
1028 spin_unlock_irq(cmd->device->host->host_lock);
1029
1030 return rc;
1031}
1032
1033static int
1034qla1280_biosparam(struct scsi_device *sdev, struct block_device *bdev,
1035 sector_t capacity, int geom[])
1036{
1037 int heads, sectors, cylinders;
1038
1039 heads = 64;
1040 sectors = 32;
1041 cylinders = (unsigned long)capacity / (heads * sectors);
1042 if (cylinders > 1024) {
1043 heads = 255;
1044 sectors = 63;
1045 cylinders = (unsigned long)capacity / (heads * sectors);
1046 /* if (cylinders > 1023)
1047 cylinders = 1023; */
1048 }
1049
1050 geom[0] = heads;
1051 geom[1] = sectors;
1052 geom[2] = cylinders;
1053
1054 return 0;
1055}
1056
1057
1058/* disable risc and host interrupts */
1059static inline void
1060qla1280_disable_intrs(struct scsi_qla_host *ha)
1061{
1062 WRT_REG_WORD(&ha->iobase->ictrl, 0);
1063 RD_REG_WORD(&ha->iobase->ictrl); /* PCI Posted Write flush */
1064}
1065
1066/* enable risc and host interrupts */
1067static inline void
1068qla1280_enable_intrs(struct scsi_qla_host *ha)
1069{
1070 WRT_REG_WORD(&ha->iobase->ictrl, (ISP_EN_INT | ISP_EN_RISC));
1071 RD_REG_WORD(&ha->iobase->ictrl); /* PCI Posted Write flush */
1072}
1073
1074/**************************************************************************
1075 * qla1280_intr_handler
1076 * Handles the H/W interrupt
1077 **************************************************************************/
1078static irqreturn_t
1079qla1280_intr_handler(int irq, void *dev_id)
1080{
1081 struct scsi_qla_host *ha;
1082 struct device_reg __iomem *reg;
1083 u16 data;
1084 int handled = 0;
1085
1086 ENTER_INTR ("qla1280_intr_handler");
1087 ha = (struct scsi_qla_host *)dev_id;
1088
1089 spin_lock(ha->host->host_lock);
1090
1091 ha->isr_count++;
1092 reg = ha->iobase;
1093
1094 qla1280_disable_intrs(ha);
1095
1096 data = qla1280_debounce_register(®->istatus);
1097 /* Check for pending interrupts. */
1098 if (data & RISC_INT) {
1099 qla1280_isr(ha, &ha->done_q);
1100 handled = 1;
1101 }
1102 if (!list_empty(&ha->done_q))
1103 qla1280_done(ha);
1104
1105 spin_unlock(ha->host->host_lock);
1106
1107 qla1280_enable_intrs(ha);
1108
1109 LEAVE_INTR("qla1280_intr_handler");
1110 return IRQ_RETVAL(handled);
1111}
1112
1113
1114static int
1115qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target)
1116{
1117 uint8_t mr;
1118 uint16_t mb[MAILBOX_REGISTER_COUNT];
1119 struct nvram *nv;
1120 int status, lun;
1121
1122 nv = &ha->nvram;
1123
1124 mr = BIT_3 | BIT_2 | BIT_1 | BIT_0;
1125
1126 /* Set Target Parameters. */
1127 mb[0] = MBC_SET_TARGET_PARAMETERS;
1128 mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
1129 mb[2] = nv->bus[bus].target[target].parameter.renegotiate_on_error << 8;
1130 mb[2] |= nv->bus[bus].target[target].parameter.stop_queue_on_check << 9;
1131 mb[2] |= nv->bus[bus].target[target].parameter.auto_request_sense << 10;
1132 mb[2] |= nv->bus[bus].target[target].parameter.tag_queuing << 11;
1133 mb[2] |= nv->bus[bus].target[target].parameter.enable_sync << 12;
1134 mb[2] |= nv->bus[bus].target[target].parameter.enable_wide << 13;
1135 mb[2] |= nv->bus[bus].target[target].parameter.parity_checking << 14;
1136 mb[2] |= nv->bus[bus].target[target].parameter.disconnect_allowed << 15;
1137
1138 if (IS_ISP1x160(ha)) {
1139 mb[2] |= nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr << 5;
1140 mb[3] = (nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8);
1141 mb[6] = (nv->bus[bus].target[target].ppr_1x160.flags.ppr_options << 8) |
1142 nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width;
1143 mr |= BIT_6;
1144 } else {
1145 mb[3] = (nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8);
1146 }
1147 mb[3] |= nv->bus[bus].target[target].sync_period;
1148
1149 status = qla1280_mailbox_command(ha, mr, mb);
1150
1151 /* Set Device Queue Parameters. */
1152 for (lun = 0; lun < MAX_LUNS; lun++) {
1153 mb[0] = MBC_SET_DEVICE_QUEUE;
1154 mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
1155 mb[1] |= lun;
1156 mb[2] = nv->bus[bus].max_queue_depth;
1157 mb[3] = nv->bus[bus].target[target].execution_throttle;
1158 status |= qla1280_mailbox_command(ha, 0x0f, mb);
1159 }
1160
1161 if (status)
1162 printk(KERN_WARNING "scsi(%ld:%i:%i): "
1163 "qla1280_set_target_parameters() failed\n",
1164 ha->host_no, bus, target);
1165 return status;
1166}
1167
1168
1169/**************************************************************************
1170 * qla1280_slave_configure
1171 *
1172 * Description:
1173 * Determines the queue depth for a given device. There are two ways
1174 * a queue depth can be obtained for a tagged queueing device. One
1175 * way is the default queue depth which is determined by whether
1176 * If it is defined, then it is used
1177 * as the default queue depth. Otherwise, we use either 4 or 8 as the
1178 * default queue depth (dependent on the number of hardware SCBs).
1179 **************************************************************************/
1180static int
1181qla1280_slave_configure(struct scsi_device *device)
1182{
1183 struct scsi_qla_host *ha;
1184 int default_depth = 3;
1185 int bus = device->channel;
1186 int target = device->id;
1187 int status = 0;
1188 struct nvram *nv;
1189 unsigned long flags;
1190
1191 ha = (struct scsi_qla_host *)device->host->hostdata;
1192 nv = &ha->nvram;
1193
1194 if (qla1280_check_for_dead_scsi_bus(ha, bus))
1195 return 1;
1196
1197 if (device->tagged_supported &&
1198 (ha->bus_settings[bus].qtag_enables & (BIT_0 << target))) {
1199 scsi_change_queue_depth(device, ha->bus_settings[bus].hiwat);
1200 } else {
1201 scsi_change_queue_depth(device, default_depth);
1202 }
1203
1204 nv->bus[bus].target[target].parameter.enable_sync = device->sdtr;
1205 nv->bus[bus].target[target].parameter.enable_wide = device->wdtr;
1206 nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr;
1207
1208 if (driver_setup.no_sync ||
1209 (driver_setup.sync_mask &&
1210 (~driver_setup.sync_mask & (1 << target))))
1211 nv->bus[bus].target[target].parameter.enable_sync = 0;
1212 if (driver_setup.no_wide ||
1213 (driver_setup.wide_mask &&
1214 (~driver_setup.wide_mask & (1 << target))))
1215 nv->bus[bus].target[target].parameter.enable_wide = 0;
1216 if (IS_ISP1x160(ha)) {
1217 if (driver_setup.no_ppr ||
1218 (driver_setup.ppr_mask &&
1219 (~driver_setup.ppr_mask & (1 << target))))
1220 nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
1221 }
1222
1223 spin_lock_irqsave(ha->host->host_lock, flags);
1224 if (nv->bus[bus].target[target].parameter.enable_sync)
1225 status = qla1280_set_target_parameters(ha, bus, target);
1226 qla1280_get_target_parameters(ha, device);
1227 spin_unlock_irqrestore(ha->host->host_lock, flags);
1228 return status;
1229}
1230
1231
1232/*
1233 * qla1280_done
1234 * Process completed commands.
1235 *
1236 * Input:
1237 * ha = adapter block pointer.
1238 */
1239static void
1240qla1280_done(struct scsi_qla_host *ha)
1241{
1242 struct srb *sp;
1243 struct list_head *done_q;
1244 int bus, target, lun;
1245 struct scsi_cmnd *cmd;
1246
1247 ENTER("qla1280_done");
1248
1249 done_q = &ha->done_q;
1250
1251 while (!list_empty(done_q)) {
1252 sp = list_entry(done_q->next, struct srb, list);
1253
1254 list_del(&sp->list);
1255
1256 cmd = sp->cmd;
1257 bus = SCSI_BUS_32(cmd);
1258 target = SCSI_TCN_32(cmd);
1259 lun = SCSI_LUN_32(cmd);
1260
1261 switch ((CMD_RESULT(cmd) >> 16)) {
1262 case DID_RESET:
1263 /* Issue marker command. */
1264 if (!ha->flags.abort_isp_active)
1265 qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
1266 break;
1267 case DID_ABORT:
1268 sp->flags &= ~SRB_ABORT_PENDING;
1269 sp->flags |= SRB_ABORTED;
1270 break;
1271 default:
1272 break;
1273 }
1274
1275 /* Release memory used for this I/O */
1276 scsi_dma_unmap(cmd);
1277
1278 /* Call the mid-level driver interrupt handler */
1279 ha->actthreads--;
1280
1281 if (sp->wait == NULL)
1282 (*(cmd)->scsi_done)(cmd);
1283 else
1284 complete(sp->wait);
1285 }
1286 LEAVE("qla1280_done");
1287}
1288
1289/*
1290 * Translates a ISP error to a Linux SCSI error
1291 */
1292static int
1293qla1280_return_status(struct response * sts, struct scsi_cmnd *cp)
1294{
1295 int host_status = DID_ERROR;
1296 uint16_t comp_status = le16_to_cpu(sts->comp_status);
1297 uint16_t state_flags = le16_to_cpu(sts->state_flags);
1298 uint32_t residual_length = le32_to_cpu(sts->residual_length);
1299 uint16_t scsi_status = le16_to_cpu(sts->scsi_status);
1300#if DEBUG_QLA1280_INTR
1301 static char *reason[] = {
1302 "DID_OK",
1303 "DID_NO_CONNECT",
1304 "DID_BUS_BUSY",
1305 "DID_TIME_OUT",
1306 "DID_BAD_TARGET",
1307 "DID_ABORT",
1308 "DID_PARITY",
1309 "DID_ERROR",
1310 "DID_RESET",
1311 "DID_BAD_INTR"
1312 };
1313#endif /* DEBUG_QLA1280_INTR */
1314
1315 ENTER("qla1280_return_status");
1316
1317#if DEBUG_QLA1280_INTR
1318 /*
1319 dprintk(1, "qla1280_return_status: compl status = 0x%04x\n",
1320 comp_status);
1321 */
1322#endif
1323
1324 switch (comp_status) {
1325 case CS_COMPLETE:
1326 host_status = DID_OK;
1327 break;
1328
1329 case CS_INCOMPLETE:
1330 if (!(state_flags & SF_GOT_BUS))
1331 host_status = DID_NO_CONNECT;
1332 else if (!(state_flags & SF_GOT_TARGET))
1333 host_status = DID_BAD_TARGET;
1334 else if (!(state_flags & SF_SENT_CDB))
1335 host_status = DID_ERROR;
1336 else if (!(state_flags & SF_TRANSFERRED_DATA))
1337 host_status = DID_ERROR;
1338 else if (!(state_flags & SF_GOT_STATUS))
1339 host_status = DID_ERROR;
1340 else if (!(state_flags & SF_GOT_SENSE))
1341 host_status = DID_ERROR;
1342 break;
1343
1344 case CS_RESET:
1345 host_status = DID_RESET;
1346 break;
1347
1348 case CS_ABORTED:
1349 host_status = DID_ABORT;
1350 break;
1351
1352 case CS_TIMEOUT:
1353 host_status = DID_TIME_OUT;
1354 break;
1355
1356 case CS_DATA_OVERRUN:
1357 dprintk(2, "Data overrun 0x%x\n", residual_length);
1358 dprintk(2, "qla1280_return_status: response packet data\n");
1359 qla1280_dump_buffer(2, (char *)sts, RESPONSE_ENTRY_SIZE);
1360 host_status = DID_ERROR;
1361 break;
1362
1363 case CS_DATA_UNDERRUN:
1364 if ((scsi_bufflen(cp) - residual_length) <
1365 cp->underflow) {
1366 printk(KERN_WARNING
1367 "scsi: Underflow detected - retrying "
1368 "command.\n");
1369 host_status = DID_ERROR;
1370 } else {
1371 scsi_set_resid(cp, residual_length);
1372 host_status = DID_OK;
1373 }
1374 break;
1375
1376 default:
1377 host_status = DID_ERROR;
1378 break;
1379 }
1380
1381#if DEBUG_QLA1280_INTR
1382 dprintk(1, "qla1280 ISP status: host status (%s) scsi status %x\n",
1383 reason[host_status], scsi_status);
1384#endif
1385
1386 LEAVE("qla1280_return_status");
1387
1388 return (scsi_status & 0xff) | (host_status << 16);
1389}
1390
1391/****************************************************************************/
1392/* QLogic ISP1280 Hardware Support Functions. */
1393/****************************************************************************/
1394
1395/*
1396 * qla1280_initialize_adapter
1397 * Initialize board.
1398 *
1399 * Input:
1400 * ha = adapter block pointer.
1401 *
1402 * Returns:
1403 * 0 = success
1404 */
1405static int
1406qla1280_initialize_adapter(struct scsi_qla_host *ha)
1407{
1408 struct device_reg __iomem *reg;
1409 int status;
1410 int bus;
1411 unsigned long flags;
1412
1413 ENTER("qla1280_initialize_adapter");
1414
1415 /* Clear adapter flags. */
1416 ha->flags.online = 0;
1417 ha->flags.disable_host_adapter = 0;
1418 ha->flags.reset_active = 0;
1419 ha->flags.abort_isp_active = 0;
1420
1421 /* TODO: implement support for the 1040 nvram format */
1422 if (IS_ISP1040(ha))
1423 driver_setup.no_nvram = 1;
1424
1425 dprintk(1, "Configure PCI space for adapter...\n");
1426
1427 reg = ha->iobase;
1428
1429 /* Insure mailbox registers are free. */
1430 WRT_REG_WORD(®->semaphore, 0);
1431 WRT_REG_WORD(®->host_cmd, HC_CLR_RISC_INT);
1432 WRT_REG_WORD(®->host_cmd, HC_CLR_HOST_INT);
1433 RD_REG_WORD(®->host_cmd);
1434
1435 if (qla1280_read_nvram(ha)) {
1436 dprintk(2, "qla1280_initialize_adapter: failed to read "
1437 "NVRAM\n");
1438 }
1439
1440 /*
1441 * It's necessary to grab the spin here as qla1280_mailbox_command
1442 * needs to be able to drop the lock unconditionally to wait
1443 * for completion.
1444 */
1445 spin_lock_irqsave(ha->host->host_lock, flags);
1446
1447 status = qla1280_load_firmware(ha);
1448 if (status) {
1449 printk(KERN_ERR "scsi(%li): initialize: pci probe failed!\n",
1450 ha->host_no);
1451 goto out;
1452 }
1453
1454 /* Setup adapter based on NVRAM parameters. */
1455 dprintk(1, "scsi(%ld): Configure NVRAM parameters\n", ha->host_no);
1456 qla1280_nvram_config(ha);
1457
1458 if (ha->flags.disable_host_adapter) {
1459 status = 1;
1460 goto out;
1461 }
1462
1463 status = qla1280_init_rings(ha);
1464 if (status)
1465 goto out;
1466
1467 /* Issue SCSI reset, if we can't reset twice then bus is dead */
1468 for (bus = 0; bus < ha->ports; bus++) {
1469 if (!ha->bus_settings[bus].disable_scsi_reset &&
1470 qla1280_bus_reset(ha, bus) &&
1471 qla1280_bus_reset(ha, bus))
1472 ha->bus_settings[bus].scsi_bus_dead = 1;
1473 }
1474
1475 ha->flags.online = 1;
1476 out:
1477 spin_unlock_irqrestore(ha->host->host_lock, flags);
1478
1479 if (status)
1480 dprintk(2, "qla1280_initialize_adapter: **** FAILED ****\n");
1481
1482 LEAVE("qla1280_initialize_adapter");
1483 return status;
1484}
1485
1486/*
1487 * qla1280_request_firmware
1488 * Acquire firmware for chip. Retain in memory
1489 * for error recovery.
1490 *
1491 * Input:
1492 * ha = adapter block pointer.
1493 *
1494 * Returns:
1495 * Pointer to firmware image or an error code
1496 * cast to pointer via ERR_PTR().
1497 */
1498static const struct firmware *
1499qla1280_request_firmware(struct scsi_qla_host *ha)
1500{
1501 const struct firmware *fw;
1502 int err;
1503 int index;
1504 char *fwname;
1505
1506 spin_unlock_irq(ha->host->host_lock);
1507 mutex_lock(&qla1280_firmware_mutex);
1508
1509 index = ql1280_board_tbl[ha->devnum].fw_index;
1510 fw = qla1280_fw_tbl[index].fw;
1511 if (fw)
1512 goto out;
1513
1514 fwname = qla1280_fw_tbl[index].fwname;
1515 err = request_firmware(&fw, fwname, &ha->pdev->dev);
1516
1517 if (err) {
1518 printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
1519 fwname, err);
1520 fw = ERR_PTR(err);
1521 goto unlock;
1522 }
1523 if ((fw->size % 2) || (fw->size < 6)) {
1524 printk(KERN_ERR "Invalid firmware length %zu in image \"%s\"\n",
1525 fw->size, fwname);
1526 release_firmware(fw);
1527 fw = ERR_PTR(-EINVAL);
1528 goto unlock;
1529 }
1530
1531 qla1280_fw_tbl[index].fw = fw;
1532
1533 out:
1534 ha->fwver1 = fw->data[0];
1535 ha->fwver2 = fw->data[1];
1536 ha->fwver3 = fw->data[2];
1537 unlock:
1538 mutex_unlock(&qla1280_firmware_mutex);
1539 spin_lock_irq(ha->host->host_lock);
1540 return fw;
1541}
1542
1543/*
1544 * Chip diagnostics
1545 * Test chip for proper operation.
1546 *
1547 * Input:
1548 * ha = adapter block pointer.
1549 *
1550 * Returns:
1551 * 0 = success.
1552 */
1553static int
1554qla1280_chip_diag(struct scsi_qla_host *ha)
1555{
1556 uint16_t mb[MAILBOX_REGISTER_COUNT];
1557 struct device_reg __iomem *reg = ha->iobase;
1558 int status = 0;
1559 int cnt;
1560 uint16_t data;
1561 dprintk(3, "qla1280_chip_diag: testing device at 0x%p \n", ®->id_l);
1562
1563 dprintk(1, "scsi(%ld): Verifying chip\n", ha->host_no);
1564
1565 /* Soft reset chip and wait for it to finish. */
1566 WRT_REG_WORD(®->ictrl, ISP_RESET);
1567
1568 /*
1569 * We can't do a traditional PCI write flush here by reading
1570 * back the register. The card will not respond once the reset
1571 * is in action and we end up with a machine check exception
1572 * instead. Nothing to do but wait and hope for the best.
1573 * A portable pci_write_flush(pdev) call would be very useful here.
1574 */
1575 udelay(20);
1576 data = qla1280_debounce_register(®->ictrl);
1577 /*
1578 * Yet another QLogic gem ;-(
1579 */
1580 for (cnt = 1000000; cnt && data & ISP_RESET; cnt--) {
1581 udelay(5);
1582 data = RD_REG_WORD(®->ictrl);
1583 }
1584
1585 if (!cnt)
1586 goto fail;
1587
1588 /* Reset register cleared by chip reset. */
1589 dprintk(3, "qla1280_chip_diag: reset register cleared by chip reset\n");
1590
1591 WRT_REG_WORD(®->cfg_1, 0);
1592
1593 /* Reset RISC and disable BIOS which
1594 allows RISC to execute out of RAM. */
1595 WRT_REG_WORD(®->host_cmd, HC_RESET_RISC |
1596 HC_RELEASE_RISC | HC_DISABLE_BIOS);
1597
1598 RD_REG_WORD(®->id_l); /* Flush PCI write */
1599 data = qla1280_debounce_register(®->mailbox0);
1600
1601 /*
1602 * I *LOVE* this code!
1603 */
1604 for (cnt = 1000000; cnt && data == MBS_BUSY; cnt--) {
1605 udelay(5);
1606 data = RD_REG_WORD(®->mailbox0);
1607 }
1608
1609 if (!cnt)
1610 goto fail;
1611
1612 /* Check product ID of chip */
1613 dprintk(3, "qla1280_chip_diag: Checking product ID of chip\n");
1614
1615 if (RD_REG_WORD(®->mailbox1) != PROD_ID_1 ||
1616 (RD_REG_WORD(®->mailbox2) != PROD_ID_2 &&
1617 RD_REG_WORD(®->mailbox2) != PROD_ID_2a) ||
1618 RD_REG_WORD(®->mailbox3) != PROD_ID_3 ||
1619 RD_REG_WORD(®->mailbox4) != PROD_ID_4) {
1620 printk(KERN_INFO "qla1280: Wrong product ID = "
1621 "0x%x,0x%x,0x%x,0x%x\n",
1622 RD_REG_WORD(®->mailbox1),
1623 RD_REG_WORD(®->mailbox2),
1624 RD_REG_WORD(®->mailbox3),
1625 RD_REG_WORD(®->mailbox4));
1626 goto fail;
1627 }
1628
1629 /*
1630 * Enable ints early!!!
1631 */
1632 qla1280_enable_intrs(ha);
1633
1634 dprintk(1, "qla1280_chip_diag: Checking mailboxes of chip\n");
1635 /* Wrap Incoming Mailboxes Test. */
1636 mb[0] = MBC_MAILBOX_REGISTER_TEST;
1637 mb[1] = 0xAAAA;
1638 mb[2] = 0x5555;
1639 mb[3] = 0xAA55;
1640 mb[4] = 0x55AA;
1641 mb[5] = 0xA5A5;
1642 mb[6] = 0x5A5A;
1643 mb[7] = 0x2525;
1644
1645 status = qla1280_mailbox_command(ha, 0xff, mb);
1646 if (status)
1647 goto fail;
1648
1649 if (mb[1] != 0xAAAA || mb[2] != 0x5555 || mb[3] != 0xAA55 ||
1650 mb[4] != 0x55AA || mb[5] != 0xA5A5 || mb[6] != 0x5A5A ||
1651 mb[7] != 0x2525) {
1652 printk(KERN_INFO "qla1280: Failed mbox check\n");
1653 goto fail;
1654 }
1655
1656 dprintk(3, "qla1280_chip_diag: exiting normally\n");
1657 return 0;
1658 fail:
1659 dprintk(2, "qla1280_chip_diag: **** FAILED ****\n");
1660 return status;
1661}
1662
1663static int
1664qla1280_load_firmware_pio(struct scsi_qla_host *ha)
1665{
1666 /* enter with host_lock acquired */
1667
1668 const struct firmware *fw;
1669 const __le16 *fw_data;
1670 uint16_t risc_address, risc_code_size;
1671 uint16_t mb[MAILBOX_REGISTER_COUNT], i;
1672 int err = 0;
1673
1674 fw = qla1280_request_firmware(ha);
1675 if (IS_ERR(fw))
1676 return PTR_ERR(fw);
1677
1678 fw_data = (const __le16 *)&fw->data[0];
1679 ha->fwstart = __le16_to_cpu(fw_data[2]);
1680
1681 /* Load RISC code. */
1682 risc_address = ha->fwstart;
1683 fw_data = (const __le16 *)&fw->data[6];
1684 risc_code_size = (fw->size - 6) / 2;
1685
1686 for (i = 0; i < risc_code_size; i++) {
1687 mb[0] = MBC_WRITE_RAM_WORD;
1688 mb[1] = risc_address + i;
1689 mb[2] = __le16_to_cpu(fw_data[i]);
1690
1691 err = qla1280_mailbox_command(ha, BIT_0 | BIT_1 | BIT_2, mb);
1692 if (err) {
1693 printk(KERN_ERR "scsi(%li): Failed to load firmware\n",
1694 ha->host_no);
1695 break;
1696 }
1697 }
1698
1699 return err;
1700}
1701
1702#define DUMP_IT_BACK 0 /* for debug of RISC loading */
1703static int
1704qla1280_load_firmware_dma(struct scsi_qla_host *ha)
1705{
1706 /* enter with host_lock acquired */
1707 const struct firmware *fw;
1708 const __le16 *fw_data;
1709 uint16_t risc_address, risc_code_size;
1710 uint16_t mb[MAILBOX_REGISTER_COUNT], cnt;
1711 int err = 0, num, i;
1712#if DUMP_IT_BACK
1713 uint8_t *sp, *tbuf;
1714 dma_addr_t p_tbuf;
1715
1716 tbuf = dma_alloc_coherent(&ha->pdev->dev, 8000, &p_tbuf, GFP_KERNEL);
1717 if (!tbuf)
1718 return -ENOMEM;
1719#endif
1720
1721 fw = qla1280_request_firmware(ha);
1722 if (IS_ERR(fw))
1723 return PTR_ERR(fw);
1724
1725 fw_data = (const __le16 *)&fw->data[0];
1726 ha->fwstart = __le16_to_cpu(fw_data[2]);
1727
1728 /* Load RISC code. */
1729 risc_address = ha->fwstart;
1730 fw_data = (const __le16 *)&fw->data[6];
1731 risc_code_size = (fw->size - 6) / 2;
1732
1733 dprintk(1, "%s: DMA RISC code (%i) words\n",
1734 __func__, risc_code_size);
1735
1736 num = 0;
1737 while (risc_code_size > 0) {
1738 int warn __attribute__((unused)) = 0;
1739
1740 cnt = 2000 >> 1;
1741
1742 if (cnt > risc_code_size)
1743 cnt = risc_code_size;
1744
1745 dprintk(2, "qla1280_setup_chip: loading risc @ =(0x%p),"
1746 "%d,%d(0x%x)\n",
1747 fw_data, cnt, num, risc_address);
1748 for(i = 0; i < cnt; i++)
1749 ((__le16 *)ha->request_ring)[i] = fw_data[i];
1750
1751 mb[0] = MBC_LOAD_RAM;
1752 mb[1] = risc_address;
1753 mb[4] = cnt;
1754 mb[3] = ha->request_dma & 0xffff;
1755 mb[2] = (ha->request_dma >> 16) & 0xffff;
1756 mb[7] = upper_32_bits(ha->request_dma) & 0xffff;
1757 mb[6] = upper_32_bits(ha->request_dma) >> 16;
1758 dprintk(2, "%s: op=%d 0x%p = 0x%4x,0x%4x,0x%4x,0x%4x\n",
1759 __func__, mb[0],
1760 (void *)(long)ha->request_dma,
1761 mb[6], mb[7], mb[2], mb[3]);
1762 err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 |
1763 BIT_1 | BIT_0, mb);
1764 if (err) {
1765 printk(KERN_ERR "scsi(%li): Failed to load partial "
1766 "segment of f\n", ha->host_no);
1767 goto out;
1768 }
1769
1770#if DUMP_IT_BACK
1771 mb[0] = MBC_DUMP_RAM;
1772 mb[1] = risc_address;
1773 mb[4] = cnt;
1774 mb[3] = p_tbuf & 0xffff;
1775 mb[2] = (p_tbuf >> 16) & 0xffff;
1776 mb[7] = upper_32_bits(p_tbuf) & 0xffff;
1777 mb[6] = upper_32_bits(p_tbuf) >> 16;
1778
1779 err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 |
1780 BIT_1 | BIT_0, mb);
1781 if (err) {
1782 printk(KERN_ERR
1783 "Failed to dump partial segment of f/w\n");
1784 goto out;
1785 }
1786 sp = (uint8_t *)ha->request_ring;
1787 for (i = 0; i < (cnt << 1); i++) {
1788 if (tbuf[i] != sp[i] && warn++ < 10) {
1789 printk(KERN_ERR "%s: FW compare error @ "
1790 "byte(0x%x) loop#=%x\n",
1791 __func__, i, num);
1792 printk(KERN_ERR "%s: FWbyte=%x "
1793 "FWfromChip=%x\n",
1794 __func__, sp[i], tbuf[i]);
1795 /*break; */
1796 }
1797 }
1798#endif
1799 risc_address += cnt;
1800 risc_code_size = risc_code_size - cnt;
1801 fw_data = fw_data + cnt;
1802 num++;
1803 }
1804
1805 out:
1806#if DUMP_IT_BACK
1807 dma_free_coherent(&ha->pdev->dev, 8000, tbuf, p_tbuf);
1808#endif
1809 return err;
1810}
1811
1812static int
1813qla1280_start_firmware(struct scsi_qla_host *ha)
1814{
1815 uint16_t mb[MAILBOX_REGISTER_COUNT];
1816 int err;
1817
1818 dprintk(1, "%s: Verifying checksum of loaded RISC code.\n",
1819 __func__);
1820
1821 /* Verify checksum of loaded RISC code. */
1822 mb[0] = MBC_VERIFY_CHECKSUM;
1823 /* mb[1] = ql12_risc_code_addr01; */
1824 mb[1] = ha->fwstart;
1825 err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
1826 if (err) {
1827 printk(KERN_ERR "scsi(%li): RISC checksum failed.\n", ha->host_no);
1828 return err;
1829 }
1830
1831 /* Start firmware execution. */
1832 dprintk(1, "%s: start firmware running.\n", __func__);
1833 mb[0] = MBC_EXECUTE_FIRMWARE;
1834 mb[1] = ha->fwstart;
1835 err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
1836 if (err) {
1837 printk(KERN_ERR "scsi(%li): Failed to start firmware\n",
1838 ha->host_no);
1839 }
1840
1841 return err;
1842}
1843
1844static int
1845qla1280_load_firmware(struct scsi_qla_host *ha)
1846{
1847 /* enter with host_lock taken */
1848 int err;
1849
1850 err = qla1280_chip_diag(ha);
1851 if (err)
1852 goto out;
1853 if (IS_ISP1040(ha))
1854 err = qla1280_load_firmware_pio(ha);
1855 else
1856 err = qla1280_load_firmware_dma(ha);
1857 if (err)
1858 goto out;
1859 err = qla1280_start_firmware(ha);
1860 out:
1861 return err;
1862}
1863
1864/*
1865 * Initialize rings
1866 *
1867 * Input:
1868 * ha = adapter block pointer.
1869 * ha->request_ring = request ring virtual address
1870 * ha->response_ring = response ring virtual address
1871 * ha->request_dma = request ring physical address
1872 * ha->response_dma = response ring physical address
1873 *
1874 * Returns:
1875 * 0 = success.
1876 */
1877static int
1878qla1280_init_rings(struct scsi_qla_host *ha)
1879{
1880 uint16_t mb[MAILBOX_REGISTER_COUNT];
1881 int status = 0;
1882
1883 ENTER("qla1280_init_rings");
1884
1885 /* Clear outstanding commands array. */
1886 memset(ha->outstanding_cmds, 0,
1887 sizeof(struct srb *) * MAX_OUTSTANDING_COMMANDS);
1888
1889 /* Initialize request queue. */
1890 ha->request_ring_ptr = ha->request_ring;
1891 ha->req_ring_index = 0;
1892 ha->req_q_cnt = REQUEST_ENTRY_CNT;
1893 /* mb[0] = MBC_INIT_REQUEST_QUEUE; */
1894 mb[0] = MBC_INIT_REQUEST_QUEUE_A64;
1895 mb[1] = REQUEST_ENTRY_CNT;
1896 mb[3] = ha->request_dma & 0xffff;
1897 mb[2] = (ha->request_dma >> 16) & 0xffff;
1898 mb[4] = 0;
1899 mb[7] = upper_32_bits(ha->request_dma) & 0xffff;
1900 mb[6] = upper_32_bits(ha->request_dma) >> 16;
1901 if (!(status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_4 |
1902 BIT_3 | BIT_2 | BIT_1 | BIT_0,
1903 &mb[0]))) {
1904 /* Initialize response queue. */
1905 ha->response_ring_ptr = ha->response_ring;
1906 ha->rsp_ring_index = 0;
1907 /* mb[0] = MBC_INIT_RESPONSE_QUEUE; */
1908 mb[0] = MBC_INIT_RESPONSE_QUEUE_A64;
1909 mb[1] = RESPONSE_ENTRY_CNT;
1910 mb[3] = ha->response_dma & 0xffff;
1911 mb[2] = (ha->response_dma >> 16) & 0xffff;
1912 mb[5] = 0;
1913 mb[7] = upper_32_bits(ha->response_dma) & 0xffff;
1914 mb[6] = upper_32_bits(ha->response_dma) >> 16;
1915 status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_5 |
1916 BIT_3 | BIT_2 | BIT_1 | BIT_0,
1917 &mb[0]);
1918 }
1919
1920 if (status)
1921 dprintk(2, "qla1280_init_rings: **** FAILED ****\n");
1922
1923 LEAVE("qla1280_init_rings");
1924 return status;
1925}
1926
1927static void
1928qla1280_print_settings(struct nvram *nv)
1929{
1930 dprintk(1, "qla1280 : initiator scsi id bus[0]=%d\n",
1931 nv->bus[0].config_1.initiator_id);
1932 dprintk(1, "qla1280 : initiator scsi id bus[1]=%d\n",
1933 nv->bus[1].config_1.initiator_id);
1934
1935 dprintk(1, "qla1280 : bus reset delay[0]=%d\n",
1936 nv->bus[0].bus_reset_delay);
1937 dprintk(1, "qla1280 : bus reset delay[1]=%d\n",
1938 nv->bus[1].bus_reset_delay);
1939
1940 dprintk(1, "qla1280 : retry count[0]=%d\n", nv->bus[0].retry_count);
1941 dprintk(1, "qla1280 : retry delay[0]=%d\n", nv->bus[0].retry_delay);
1942 dprintk(1, "qla1280 : retry count[1]=%d\n", nv->bus[1].retry_count);
1943 dprintk(1, "qla1280 : retry delay[1]=%d\n", nv->bus[1].retry_delay);
1944
1945 dprintk(1, "qla1280 : async data setup time[0]=%d\n",
1946 nv->bus[0].config_2.async_data_setup_time);
1947 dprintk(1, "qla1280 : async data setup time[1]=%d\n",
1948 nv->bus[1].config_2.async_data_setup_time);
1949
1950 dprintk(1, "qla1280 : req/ack active negation[0]=%d\n",
1951 nv->bus[0].config_2.req_ack_active_negation);
1952 dprintk(1, "qla1280 : req/ack active negation[1]=%d\n",
1953 nv->bus[1].config_2.req_ack_active_negation);
1954
1955 dprintk(1, "qla1280 : data line active negation[0]=%d\n",
1956 nv->bus[0].config_2.data_line_active_negation);
1957 dprintk(1, "qla1280 : data line active negation[1]=%d\n",
1958 nv->bus[1].config_2.data_line_active_negation);
1959
1960 dprintk(1, "qla1280 : disable loading risc code=%d\n",
1961 nv->cntr_flags_1.disable_loading_risc_code);
1962
1963 dprintk(1, "qla1280 : enable 64bit addressing=%d\n",
1964 nv->cntr_flags_1.enable_64bit_addressing);
1965
1966 dprintk(1, "qla1280 : selection timeout limit[0]=%d\n",
1967 nv->bus[0].selection_timeout);
1968 dprintk(1, "qla1280 : selection timeout limit[1]=%d\n",
1969 nv->bus[1].selection_timeout);
1970
1971 dprintk(1, "qla1280 : max queue depth[0]=%d\n",
1972 nv->bus[0].max_queue_depth);
1973 dprintk(1, "qla1280 : max queue depth[1]=%d\n",
1974 nv->bus[1].max_queue_depth);
1975}
1976
1977static void
1978qla1280_set_target_defaults(struct scsi_qla_host *ha, int bus, int target)
1979{
1980 struct nvram *nv = &ha->nvram;
1981
1982 nv->bus[bus].target[target].parameter.renegotiate_on_error = 1;
1983 nv->bus[bus].target[target].parameter.auto_request_sense = 1;
1984 nv->bus[bus].target[target].parameter.tag_queuing = 1;
1985 nv->bus[bus].target[target].parameter.enable_sync = 1;
1986#if 1 /* Some SCSI Processors do not seem to like this */
1987 nv->bus[bus].target[target].parameter.enable_wide = 1;
1988#endif
1989 nv->bus[bus].target[target].execution_throttle =
1990 nv->bus[bus].max_queue_depth - 1;
1991 nv->bus[bus].target[target].parameter.parity_checking = 1;
1992 nv->bus[bus].target[target].parameter.disconnect_allowed = 1;
1993
1994 if (IS_ISP1x160(ha)) {
1995 nv->bus[bus].target[target].flags.flags1x160.device_enable = 1;
1996 nv->bus[bus].target[target].flags.flags1x160.sync_offset = 0x0e;
1997 nv->bus[bus].target[target].sync_period = 9;
1998 nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1;
1999 nv->bus[bus].target[target].ppr_1x160.flags.ppr_options = 2;
2000 nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width = 1;
2001 } else {
2002 nv->bus[bus].target[target].flags.flags1x80.device_enable = 1;
2003 nv->bus[bus].target[target].flags.flags1x80.sync_offset = 12;
2004 nv->bus[bus].target[target].sync_period = 10;
2005 }
2006}
2007
2008static void
2009qla1280_set_defaults(struct scsi_qla_host *ha)
2010{
2011 struct nvram *nv = &ha->nvram;
2012 int bus, target;
2013
2014 dprintk(1, "Using defaults for NVRAM: \n");
2015 memset(nv, 0, sizeof(struct nvram));
2016
2017 /* nv->cntr_flags_1.disable_loading_risc_code = 1; */
2018 nv->firmware_feature.f.enable_fast_posting = 1;
2019 nv->firmware_feature.f.disable_synchronous_backoff = 1;
2020 nv->termination.scsi_bus_0_control = 3;
2021 nv->termination.scsi_bus_1_control = 3;
2022 nv->termination.auto_term_support = 1;
2023
2024 /*
2025 * Set default FIFO magic - What appropriate values would be here
2026 * is unknown. This is what I have found testing with 12160s.
2027 *
2028 * Now, I would love the magic decoder ring for this one, the
2029 * header file provided by QLogic seems to be bogus or incomplete
2030 * at best.
2031 */
2032 nv->isp_config.burst_enable = 1;
2033 if (IS_ISP1040(ha))
2034 nv->isp_config.fifo_threshold |= 3;
2035 else
2036 nv->isp_config.fifo_threshold |= 4;
2037
2038 if (IS_ISP1x160(ha))
2039 nv->isp_parameter = 0x01; /* fast memory enable */
2040
2041 for (bus = 0; bus < MAX_BUSES; bus++) {
2042 nv->bus[bus].config_1.initiator_id = 7;
2043 nv->bus[bus].config_2.req_ack_active_negation = 1;
2044 nv->bus[bus].config_2.data_line_active_negation = 1;
2045 nv->bus[bus].selection_timeout = 250;
2046 nv->bus[bus].max_queue_depth = 32;
2047
2048 if (IS_ISP1040(ha)) {
2049 nv->bus[bus].bus_reset_delay = 3;
2050 nv->bus[bus].config_2.async_data_setup_time = 6;
2051 nv->bus[bus].retry_delay = 1;
2052 } else {
2053 nv->bus[bus].bus_reset_delay = 5;
2054 nv->bus[bus].config_2.async_data_setup_time = 8;
2055 }
2056
2057 for (target = 0; target < MAX_TARGETS; target++)
2058 qla1280_set_target_defaults(ha, bus, target);
2059 }
2060}
2061
2062static int
2063qla1280_config_target(struct scsi_qla_host *ha, int bus, int target)
2064{
2065 struct nvram *nv = &ha->nvram;
2066 uint16_t mb[MAILBOX_REGISTER_COUNT];
2067 int status, lun;
2068 uint16_t flag;
2069
2070 /* Set Target Parameters. */
2071 mb[0] = MBC_SET_TARGET_PARAMETERS;
2072 mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
2073
2074 /*
2075 * Do not enable sync and ppr for the initial INQUIRY run. We
2076 * enable this later if we determine the target actually
2077 * supports it.
2078 */
2079 mb[2] = (TP_RENEGOTIATE | TP_AUTO_REQUEST_SENSE | TP_TAGGED_QUEUE
2080 | TP_WIDE | TP_PARITY | TP_DISCONNECT);
2081
2082 if (IS_ISP1x160(ha))
2083 mb[3] = nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8;
2084 else
2085 mb[3] = nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8;
2086 mb[3] |= nv->bus[bus].target[target].sync_period;
2087 status = qla1280_mailbox_command(ha, 0x0f, mb);
2088
2089 /* Save Tag queuing enable flag. */
2090 flag = (BIT_0 << target);
2091 if (nv->bus[bus].target[target].parameter.tag_queuing)
2092 ha->bus_settings[bus].qtag_enables |= flag;
2093
2094 /* Save Device enable flag. */
2095 if (IS_ISP1x160(ha)) {
2096 if (nv->bus[bus].target[target].flags.flags1x160.device_enable)
2097 ha->bus_settings[bus].device_enables |= flag;
2098 ha->bus_settings[bus].lun_disables |= 0;
2099 } else {
2100 if (nv->bus[bus].target[target].flags.flags1x80.device_enable)
2101 ha->bus_settings[bus].device_enables |= flag;
2102 /* Save LUN disable flag. */
2103 if (nv->bus[bus].target[target].flags.flags1x80.lun_disable)
2104 ha->bus_settings[bus].lun_disables |= flag;
2105 }
2106
2107 /* Set Device Queue Parameters. */
2108 for (lun = 0; lun < MAX_LUNS; lun++) {
2109 mb[0] = MBC_SET_DEVICE_QUEUE;
2110 mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
2111 mb[1] |= lun;
2112 mb[2] = nv->bus[bus].max_queue_depth;
2113 mb[3] = nv->bus[bus].target[target].execution_throttle;
2114 status |= qla1280_mailbox_command(ha, 0x0f, mb);
2115 }
2116
2117 return status;
2118}
2119
2120static int
2121qla1280_config_bus(struct scsi_qla_host *ha, int bus)
2122{
2123 struct nvram *nv = &ha->nvram;
2124 uint16_t mb[MAILBOX_REGISTER_COUNT];
2125 int target, status;
2126
2127 /* SCSI Reset Disable. */
2128 ha->bus_settings[bus].disable_scsi_reset =
2129 nv->bus[bus].config_1.scsi_reset_disable;
2130
2131 /* Initiator ID. */
2132 ha->bus_settings[bus].id = nv->bus[bus].config_1.initiator_id;
2133 mb[0] = MBC_SET_INITIATOR_ID;
2134 mb[1] = bus ? ha->bus_settings[bus].id | BIT_7 :
2135 ha->bus_settings[bus].id;
2136 status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
2137
2138 /* Reset Delay. */
2139 ha->bus_settings[bus].bus_reset_delay =
2140 nv->bus[bus].bus_reset_delay;
2141
2142 /* Command queue depth per device. */
2143 ha->bus_settings[bus].hiwat = nv->bus[bus].max_queue_depth - 1;
2144
2145 /* Set target parameters. */
2146 for (target = 0; target < MAX_TARGETS; target++)
2147 status |= qla1280_config_target(ha, bus, target);
2148
2149 return status;
2150}
2151
2152static int
2153qla1280_nvram_config(struct scsi_qla_host *ha)
2154{
2155 struct device_reg __iomem *reg = ha->iobase;
2156 struct nvram *nv = &ha->nvram;
2157 int bus, target, status = 0;
2158 uint16_t mb[MAILBOX_REGISTER_COUNT];
2159
2160 ENTER("qla1280_nvram_config");
2161
2162 if (ha->nvram_valid) {
2163 /* Always force AUTO sense for LINUX SCSI */
2164 for (bus = 0; bus < MAX_BUSES; bus++)
2165 for (target = 0; target < MAX_TARGETS; target++) {
2166 nv->bus[bus].target[target].parameter.
2167 auto_request_sense = 1;
2168 }
2169 } else {
2170 qla1280_set_defaults(ha);
2171 }
2172
2173 qla1280_print_settings(nv);
2174
2175 /* Disable RISC load of firmware. */
2176 ha->flags.disable_risc_code_load =
2177 nv->cntr_flags_1.disable_loading_risc_code;
2178
2179 if (IS_ISP1040(ha)) {
2180 uint16_t hwrev, cfg1, cdma_conf, ddma_conf;
2181
2182 hwrev = RD_REG_WORD(®->cfg_0) & ISP_CFG0_HWMSK;
2183
2184 cfg1 = RD_REG_WORD(®->cfg_1) & ~(BIT_4 | BIT_5 | BIT_6);
2185 cdma_conf = RD_REG_WORD(®->cdma_cfg);
2186 ddma_conf = RD_REG_WORD(®->ddma_cfg);
2187
2188 /* Busted fifo, says mjacob. */
2189 if (hwrev != ISP_CFG0_1040A)
2190 cfg1 |= nv->isp_config.fifo_threshold << 4;
2191
2192 cfg1 |= nv->isp_config.burst_enable << 2;
2193 WRT_REG_WORD(®->cfg_1, cfg1);
2194
2195 WRT_REG_WORD(®->cdma_cfg, cdma_conf | CDMA_CONF_BENAB);
2196 WRT_REG_WORD(®->ddma_cfg, cdma_conf | DDMA_CONF_BENAB);
2197 } else {
2198 uint16_t cfg1, term;
2199
2200 /* Set ISP hardware DMA burst */
2201 cfg1 = nv->isp_config.fifo_threshold << 4;
2202 cfg1 |= nv->isp_config.burst_enable << 2;
2203 /* Enable DMA arbitration on dual channel controllers */
2204 if (ha->ports > 1)
2205 cfg1 |= BIT_13;
2206 WRT_REG_WORD(®->cfg_1, cfg1);
2207
2208 /* Set SCSI termination. */
2209 WRT_REG_WORD(®->gpio_enable,
2210 BIT_7 | BIT_3 | BIT_2 | BIT_1 | BIT_0);
2211 term = nv->termination.scsi_bus_1_control;
2212 term |= nv->termination.scsi_bus_0_control << 2;
2213 term |= nv->termination.auto_term_support << 7;
2214 RD_REG_WORD(®->id_l); /* Flush PCI write */
2215 WRT_REG_WORD(®->gpio_data, term);
2216 }
2217 RD_REG_WORD(®->id_l); /* Flush PCI write */
2218
2219 /* ISP parameter word. */
2220 mb[0] = MBC_SET_SYSTEM_PARAMETER;
2221 mb[1] = nv->isp_parameter;
2222 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
2223
2224 if (IS_ISP1x40(ha)) {
2225 /* clock rate - for qla1240 and older, only */
2226 mb[0] = MBC_SET_CLOCK_RATE;
2227 mb[1] = 40;
2228 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
2229 }
2230
2231 /* Firmware feature word. */
2232 mb[0] = MBC_SET_FIRMWARE_FEATURES;
2233 mb[1] = nv->firmware_feature.f.enable_fast_posting;
2234 mb[1] |= nv->firmware_feature.f.report_lvd_bus_transition << 1;
2235 mb[1] |= nv->firmware_feature.f.disable_synchronous_backoff << 5;
2236 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
2237
2238 /* Retry count and delay. */
2239 mb[0] = MBC_SET_RETRY_COUNT;
2240 mb[1] = nv->bus[0].retry_count;
2241 mb[2] = nv->bus[0].retry_delay;
2242 mb[6] = nv->bus[1].retry_count;
2243 mb[7] = nv->bus[1].retry_delay;
2244 status |= qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_2 |
2245 BIT_1 | BIT_0, &mb[0]);
2246
2247 /* ASYNC data setup time. */
2248 mb[0] = MBC_SET_ASYNC_DATA_SETUP;
2249 mb[1] = nv->bus[0].config_2.async_data_setup_time;
2250 mb[2] = nv->bus[1].config_2.async_data_setup_time;
2251 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2252
2253 /* Active negation states. */
2254 mb[0] = MBC_SET_ACTIVE_NEGATION;
2255 mb[1] = 0;
2256 if (nv->bus[0].config_2.req_ack_active_negation)
2257 mb[1] |= BIT_5;
2258 if (nv->bus[0].config_2.data_line_active_negation)
2259 mb[1] |= BIT_4;
2260 mb[2] = 0;
2261 if (nv->bus[1].config_2.req_ack_active_negation)
2262 mb[2] |= BIT_5;
2263 if (nv->bus[1].config_2.data_line_active_negation)
2264 mb[2] |= BIT_4;
2265 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
2266
2267 mb[0] = MBC_SET_DATA_OVERRUN_RECOVERY;
2268 mb[1] = 2; /* Reset SCSI bus and return all outstanding IO */
2269 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
2270
2271 /* thingy */
2272 mb[0] = MBC_SET_PCI_CONTROL;
2273 mb[1] = BIT_1; /* Data DMA Channel Burst Enable */
2274 mb[2] = BIT_1; /* Command DMA Channel Burst Enable */
2275 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
2276
2277 mb[0] = MBC_SET_TAG_AGE_LIMIT;
2278 mb[1] = 8;
2279 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
2280
2281 /* Selection timeout. */
2282 mb[0] = MBC_SET_SELECTION_TIMEOUT;
2283 mb[1] = nv->bus[0].selection_timeout;
2284 mb[2] = nv->bus[1].selection_timeout;
2285 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
2286
2287 for (bus = 0; bus < ha->ports; bus++)
2288 status |= qla1280_config_bus(ha, bus);
2289
2290 if (status)
2291 dprintk(2, "qla1280_nvram_config: **** FAILED ****\n");
2292
2293 LEAVE("qla1280_nvram_config");
2294 return status;
2295}
2296
2297/*
2298 * Get NVRAM data word
2299 * Calculates word position in NVRAM and calls request routine to
2300 * get the word from NVRAM.
2301 *
2302 * Input:
2303 * ha = adapter block pointer.
2304 * address = NVRAM word address.
2305 *
2306 * Returns:
2307 * data word.
2308 */
2309static uint16_t
2310qla1280_get_nvram_word(struct scsi_qla_host *ha, uint32_t address)
2311{
2312 uint32_t nv_cmd;
2313 uint16_t data;
2314
2315 nv_cmd = address << 16;
2316 nv_cmd |= NV_READ_OP;
2317
2318 data = le16_to_cpu(qla1280_nvram_request(ha, nv_cmd));
2319
2320 dprintk(8, "qla1280_get_nvram_word: exiting normally NVRAM data = "
2321 "0x%x", data);
2322
2323 return data;
2324}
2325
2326/*
2327 * NVRAM request
2328 * Sends read command to NVRAM and gets data from NVRAM.
2329 *
2330 * Input:
2331 * ha = adapter block pointer.
2332 * nv_cmd = Bit 26 = start bit
2333 * Bit 25, 24 = opcode
2334 * Bit 23-16 = address
2335 * Bit 15-0 = write data
2336 *
2337 * Returns:
2338 * data word.
2339 */
2340static uint16_t
2341qla1280_nvram_request(struct scsi_qla_host *ha, uint32_t nv_cmd)
2342{
2343 struct device_reg __iomem *reg = ha->iobase;
2344 int cnt;
2345 uint16_t data = 0;
2346 uint16_t reg_data;
2347
2348 /* Send command to NVRAM. */
2349
2350 nv_cmd <<= 5;
2351 for (cnt = 0; cnt < 11; cnt++) {
2352 if (nv_cmd & BIT_31)
2353 qla1280_nv_write(ha, NV_DATA_OUT);
2354 else
2355 qla1280_nv_write(ha, 0);
2356 nv_cmd <<= 1;
2357 }
2358
2359 /* Read data from NVRAM. */
2360
2361 for (cnt = 0; cnt < 16; cnt++) {
2362 WRT_REG_WORD(®->nvram, (NV_SELECT | NV_CLOCK));
2363 RD_REG_WORD(®->id_l); /* Flush PCI write */
2364 NVRAM_DELAY();
2365 data <<= 1;
2366 reg_data = RD_REG_WORD(®->nvram);
2367 if (reg_data & NV_DATA_IN)
2368 data |= BIT_0;
2369 WRT_REG_WORD(®->nvram, NV_SELECT);
2370 RD_REG_WORD(®->id_l); /* Flush PCI write */
2371 NVRAM_DELAY();
2372 }
2373
2374 /* Deselect chip. */
2375
2376 WRT_REG_WORD(®->nvram, NV_DESELECT);
2377 RD_REG_WORD(®->id_l); /* Flush PCI write */
2378 NVRAM_DELAY();
2379
2380 return data;
2381}
2382
2383static void
2384qla1280_nv_write(struct scsi_qla_host *ha, uint16_t data)
2385{
2386 struct device_reg __iomem *reg = ha->iobase;
2387
2388 WRT_REG_WORD(®->nvram, data | NV_SELECT);
2389 RD_REG_WORD(®->id_l); /* Flush PCI write */
2390 NVRAM_DELAY();
2391 WRT_REG_WORD(®->nvram, data | NV_SELECT | NV_CLOCK);
2392 RD_REG_WORD(®->id_l); /* Flush PCI write */
2393 NVRAM_DELAY();
2394 WRT_REG_WORD(®->nvram, data | NV_SELECT);
2395 RD_REG_WORD(®->id_l); /* Flush PCI write */
2396 NVRAM_DELAY();
2397}
2398
2399/*
2400 * Mailbox Command
2401 * Issue mailbox command and waits for completion.
2402 *
2403 * Input:
2404 * ha = adapter block pointer.
2405 * mr = mailbox registers to load.
2406 * mb = data pointer for mailbox registers.
2407 *
2408 * Output:
2409 * mb[MAILBOX_REGISTER_COUNT] = returned mailbox data.
2410 *
2411 * Returns:
2412 * 0 = success
2413 */
2414static int
2415qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb)
2416{
2417 struct device_reg __iomem *reg = ha->iobase;
2418 int status = 0;
2419 int cnt;
2420 uint16_t *optr, *iptr;
2421 uint16_t __iomem *mptr;
2422 uint16_t data;
2423 DECLARE_COMPLETION_ONSTACK(wait);
2424
2425 ENTER("qla1280_mailbox_command");
2426
2427 if (ha->mailbox_wait) {
2428 printk(KERN_ERR "Warning mailbox wait already in use!\n");
2429 }
2430 ha->mailbox_wait = &wait;
2431
2432 /*
2433 * We really should start out by verifying that the mailbox is
2434 * available before starting sending the command data
2435 */
2436 /* Load mailbox registers. */
2437 mptr = (uint16_t __iomem *) ®->mailbox0;
2438 iptr = mb;
2439 for (cnt = 0; cnt < MAILBOX_REGISTER_COUNT; cnt++) {
2440 if (mr & BIT_0) {
2441 WRT_REG_WORD(mptr, (*iptr));
2442 }
2443
2444 mr >>= 1;
2445 mptr++;
2446 iptr++;
2447 }
2448
2449 /* Issue set host interrupt command. */
2450
2451 /* set up a timer just in case we're really jammed */
2452 timer_setup(&ha->mailbox_timer, qla1280_mailbox_timeout, 0);
2453 mod_timer(&ha->mailbox_timer, jiffies + 20 * HZ);
2454
2455 spin_unlock_irq(ha->host->host_lock);
2456 WRT_REG_WORD(®->host_cmd, HC_SET_HOST_INT);
2457 data = qla1280_debounce_register(®->istatus);
2458
2459 wait_for_completion(&wait);
2460 del_timer_sync(&ha->mailbox_timer);
2461
2462 spin_lock_irq(ha->host->host_lock);
2463
2464 ha->mailbox_wait = NULL;
2465
2466 /* Check for mailbox command timeout. */
2467 if (ha->mailbox_out[0] != MBS_CMD_CMP) {
2468 printk(KERN_WARNING "qla1280_mailbox_command: Command failed, "
2469 "mailbox0 = 0x%04x, mailbox_out0 = 0x%04x, istatus = "
2470 "0x%04x\n",
2471 mb[0], ha->mailbox_out[0], RD_REG_WORD(®->istatus));
2472 printk(KERN_WARNING "m0 %04x, m1 %04x, m2 %04x, m3 %04x\n",
2473 RD_REG_WORD(®->mailbox0), RD_REG_WORD(®->mailbox1),
2474 RD_REG_WORD(®->mailbox2), RD_REG_WORD(®->mailbox3));
2475 printk(KERN_WARNING "m4 %04x, m5 %04x, m6 %04x, m7 %04x\n",
2476 RD_REG_WORD(®->mailbox4), RD_REG_WORD(®->mailbox5),
2477 RD_REG_WORD(®->mailbox6), RD_REG_WORD(®->mailbox7));
2478 status = 1;
2479 }
2480
2481 /* Load return mailbox registers. */
2482 optr = mb;
2483 iptr = (uint16_t *) &ha->mailbox_out[0];
2484 mr = MAILBOX_REGISTER_COUNT;
2485 memcpy(optr, iptr, MAILBOX_REGISTER_COUNT * sizeof(uint16_t));
2486
2487 if (ha->flags.reset_marker)
2488 qla1280_rst_aen(ha);
2489
2490 if (status)
2491 dprintk(2, "qla1280_mailbox_command: **** FAILED, mailbox0 = "
2492 "0x%x ****\n", mb[0]);
2493
2494 LEAVE("qla1280_mailbox_command");
2495 return status;
2496}
2497
2498/*
2499 * qla1280_poll
2500 * Polls ISP for interrupts.
2501 *
2502 * Input:
2503 * ha = adapter block pointer.
2504 */
2505static void
2506qla1280_poll(struct scsi_qla_host *ha)
2507{
2508 struct device_reg __iomem *reg = ha->iobase;
2509 uint16_t data;
2510 LIST_HEAD(done_q);
2511
2512 /* ENTER("qla1280_poll"); */
2513
2514 /* Check for pending interrupts. */
2515 data = RD_REG_WORD(®->istatus);
2516 if (data & RISC_INT)
2517 qla1280_isr(ha, &done_q);
2518
2519 if (!ha->mailbox_wait) {
2520 if (ha->flags.reset_marker)
2521 qla1280_rst_aen(ha);
2522 }
2523
2524 if (!list_empty(&done_q))
2525 qla1280_done(ha);
2526
2527 /* LEAVE("qla1280_poll"); */
2528}
2529
2530/*
2531 * qla1280_bus_reset
2532 * Issue SCSI bus reset.
2533 *
2534 * Input:
2535 * ha = adapter block pointer.
2536 * bus = SCSI bus number.
2537 *
2538 * Returns:
2539 * 0 = success
2540 */
2541static int
2542qla1280_bus_reset(struct scsi_qla_host *ha, int bus)
2543{
2544 uint16_t mb[MAILBOX_REGISTER_COUNT];
2545 uint16_t reset_delay;
2546 int status;
2547
2548 dprintk(3, "qla1280_bus_reset: entered\n");
2549
2550 if (qla1280_verbose)
2551 printk(KERN_INFO "scsi(%li:%i): Resetting SCSI BUS\n",
2552 ha->host_no, bus);
2553
2554 reset_delay = ha->bus_settings[bus].bus_reset_delay;
2555 mb[0] = MBC_BUS_RESET;
2556 mb[1] = reset_delay;
2557 mb[2] = (uint16_t) bus;
2558 status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2559
2560 if (status) {
2561 if (ha->bus_settings[bus].failed_reset_count > 2)
2562 ha->bus_settings[bus].scsi_bus_dead = 1;
2563 ha->bus_settings[bus].failed_reset_count++;
2564 } else {
2565 spin_unlock_irq(ha->host->host_lock);
2566 ssleep(reset_delay);
2567 spin_lock_irq(ha->host->host_lock);
2568
2569 ha->bus_settings[bus].scsi_bus_dead = 0;
2570 ha->bus_settings[bus].failed_reset_count = 0;
2571 ha->bus_settings[bus].reset_marker = 0;
2572 /* Issue marker command. */
2573 qla1280_marker(ha, bus, 0, 0, MK_SYNC_ALL);
2574 }
2575
2576 /*
2577 * We should probably call qla1280_set_target_parameters()
2578 * here as well for all devices on the bus.
2579 */
2580
2581 if (status)
2582 dprintk(2, "qla1280_bus_reset: **** FAILED ****\n");
2583 else
2584 dprintk(3, "qla1280_bus_reset: exiting normally\n");
2585
2586 return status;
2587}
2588
2589/*
2590 * qla1280_device_reset
2591 * Issue bus device reset message to the target.
2592 *
2593 * Input:
2594 * ha = adapter block pointer.
2595 * bus = SCSI BUS number.
2596 * target = SCSI ID.
2597 *
2598 * Returns:
2599 * 0 = success
2600 */
2601static int
2602qla1280_device_reset(struct scsi_qla_host *ha, int bus, int target)
2603{
2604 uint16_t mb[MAILBOX_REGISTER_COUNT];
2605 int status;
2606
2607 ENTER("qla1280_device_reset");
2608
2609 mb[0] = MBC_ABORT_TARGET;
2610 mb[1] = (bus ? (target | BIT_7) : target) << 8;
2611 mb[2] = 1;
2612 status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2613
2614 /* Issue marker command. */
2615 qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
2616
2617 if (status)
2618 dprintk(2, "qla1280_device_reset: **** FAILED ****\n");
2619
2620 LEAVE("qla1280_device_reset");
2621 return status;
2622}
2623
2624/*
2625 * qla1280_abort_command
2626 * Abort command aborts a specified IOCB.
2627 *
2628 * Input:
2629 * ha = adapter block pointer.
2630 * sp = SB structure pointer.
2631 *
2632 * Returns:
2633 * 0 = success
2634 */
2635static int
2636qla1280_abort_command(struct scsi_qla_host *ha, struct srb * sp, int handle)
2637{
2638 uint16_t mb[MAILBOX_REGISTER_COUNT];
2639 unsigned int bus, target, lun;
2640 int status;
2641
2642 ENTER("qla1280_abort_command");
2643
2644 bus = SCSI_BUS_32(sp->cmd);
2645 target = SCSI_TCN_32(sp->cmd);
2646 lun = SCSI_LUN_32(sp->cmd);
2647
2648 sp->flags |= SRB_ABORT_PENDING;
2649
2650 mb[0] = MBC_ABORT_COMMAND;
2651 mb[1] = (bus ? target | BIT_7 : target) << 8 | lun;
2652 mb[2] = handle >> 16;
2653 mb[3] = handle & 0xffff;
2654 status = qla1280_mailbox_command(ha, 0x0f, &mb[0]);
2655
2656 if (status) {
2657 dprintk(2, "qla1280_abort_command: **** FAILED ****\n");
2658 sp->flags &= ~SRB_ABORT_PENDING;
2659 }
2660
2661
2662 LEAVE("qla1280_abort_command");
2663 return status;
2664}
2665
2666/*
2667 * qla1280_reset_adapter
2668 * Reset adapter.
2669 *
2670 * Input:
2671 * ha = adapter block pointer.
2672 */
2673static void
2674qla1280_reset_adapter(struct scsi_qla_host *ha)
2675{
2676 struct device_reg __iomem *reg = ha->iobase;
2677
2678 ENTER("qla1280_reset_adapter");
2679
2680 /* Disable ISP chip */
2681 ha->flags.online = 0;
2682 WRT_REG_WORD(®->ictrl, ISP_RESET);
2683 WRT_REG_WORD(®->host_cmd,
2684 HC_RESET_RISC | HC_RELEASE_RISC | HC_DISABLE_BIOS);
2685 RD_REG_WORD(®->id_l); /* Flush PCI write */
2686
2687 LEAVE("qla1280_reset_adapter");
2688}
2689
2690/*
2691 * Issue marker command.
2692 * Function issues marker IOCB.
2693 *
2694 * Input:
2695 * ha = adapter block pointer.
2696 * bus = SCSI BUS number
2697 * id = SCSI ID
2698 * lun = SCSI LUN
2699 * type = marker modifier
2700 */
2701static void
2702qla1280_marker(struct scsi_qla_host *ha, int bus, int id, int lun, u8 type)
2703{
2704 struct mrk_entry *pkt;
2705
2706 ENTER("qla1280_marker");
2707
2708 /* Get request packet. */
2709 if ((pkt = (struct mrk_entry *) qla1280_req_pkt(ha))) {
2710 pkt->entry_type = MARKER_TYPE;
2711 pkt->lun = (uint8_t) lun;
2712 pkt->target = (uint8_t) (bus ? (id | BIT_7) : id);
2713 pkt->modifier = type;
2714 pkt->entry_status = 0;
2715
2716 /* Issue command to ISP */
2717 qla1280_isp_cmd(ha);
2718 }
2719
2720 LEAVE("qla1280_marker");
2721}
2722
2723
2724/*
2725 * qla1280_64bit_start_scsi
2726 * The start SCSI is responsible for building request packets on
2727 * request ring and modifying ISP input pointer.
2728 *
2729 * Input:
2730 * ha = adapter block pointer.
2731 * sp = SB structure pointer.
2732 *
2733 * Returns:
2734 * 0 = success, was able to issue command.
2735 */
2736#ifdef QLA_64BIT_PTR
2737static int
2738qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
2739{
2740 struct device_reg __iomem *reg = ha->iobase;
2741 struct scsi_cmnd *cmd = sp->cmd;
2742 cmd_a64_entry_t *pkt;
2743 __le32 *dword_ptr;
2744 dma_addr_t dma_handle;
2745 int status = 0;
2746 int cnt;
2747 int req_cnt;
2748 int seg_cnt;
2749 u8 dir;
2750
2751 ENTER("qla1280_64bit_start_scsi:");
2752
2753 /* Calculate number of entries and segments required. */
2754 req_cnt = 1;
2755 seg_cnt = scsi_dma_map(cmd);
2756 if (seg_cnt > 0) {
2757 if (seg_cnt > 2) {
2758 req_cnt += (seg_cnt - 2) / 5;
2759 if ((seg_cnt - 2) % 5)
2760 req_cnt++;
2761 }
2762 } else if (seg_cnt < 0) {
2763 status = 1;
2764 goto out;
2765 }
2766
2767 if ((req_cnt + 2) >= ha->req_q_cnt) {
2768 /* Calculate number of free request entries. */
2769 cnt = RD_REG_WORD(®->mailbox4);
2770 if (ha->req_ring_index < cnt)
2771 ha->req_q_cnt = cnt - ha->req_ring_index;
2772 else
2773 ha->req_q_cnt =
2774 REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
2775 }
2776
2777 dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x\n",
2778 ha->req_q_cnt, seg_cnt);
2779
2780 /* If room for request in request ring. */
2781 if ((req_cnt + 2) >= ha->req_q_cnt) {
2782 status = SCSI_MLQUEUE_HOST_BUSY;
2783 dprintk(2, "qla1280_start_scsi: in-ptr=0x%x req_q_cnt="
2784 "0x%xreq_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt,
2785 req_cnt);
2786 goto out;
2787 }
2788
2789 /* Check for room in outstanding command list. */
2790 for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&
2791 ha->outstanding_cmds[cnt] != NULL; cnt++);
2792
2793 if (cnt >= MAX_OUTSTANDING_COMMANDS) {
2794 status = SCSI_MLQUEUE_HOST_BUSY;
2795 dprintk(2, "qla1280_start_scsi: NO ROOM IN "
2796 "OUTSTANDING ARRAY, req_q_cnt=0x%x", ha->req_q_cnt);
2797 goto out;
2798 }
2799
2800 ha->outstanding_cmds[cnt] = sp;
2801 ha->req_q_cnt -= req_cnt;
2802 CMD_HANDLE(sp->cmd) = (unsigned char *)(unsigned long)(cnt + 1);
2803
2804 dprintk(2, "start: cmd=%p sp=%p CDB=%xm, handle %lx\n", cmd, sp,
2805 cmd->cmnd[0], (long)CMD_HANDLE(sp->cmd));
2806 dprintk(2, " bus %i, target %i, lun %i\n",
2807 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
2808 qla1280_dump_buffer(2, cmd->cmnd, MAX_COMMAND_SIZE);
2809
2810 /*
2811 * Build command packet.
2812 */
2813 pkt = (cmd_a64_entry_t *) ha->request_ring_ptr;
2814
2815 pkt->entry_type = COMMAND_A64_TYPE;
2816 pkt->entry_count = (uint8_t) req_cnt;
2817 pkt->sys_define = (uint8_t) ha->req_ring_index;
2818 pkt->entry_status = 0;
2819 pkt->handle = cpu_to_le32(cnt);
2820
2821 /* Zero out remaining portion of packet. */
2822 memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8));
2823
2824 /* Set ISP command timeout. */
2825 pkt->timeout = cpu_to_le16(cmd->request->timeout/HZ);
2826
2827 /* Set device target ID and LUN */
2828 pkt->lun = SCSI_LUN_32(cmd);
2829 pkt->target = SCSI_BUS_32(cmd) ?
2830 (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
2831
2832 /* Enable simple tag queuing if device supports it. */
2833 if (cmd->device->simple_tags)
2834 pkt->control_flags |= cpu_to_le16(BIT_3);
2835
2836 /* Load SCSI command packet. */
2837 pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
2838 memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));
2839 /* dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
2840
2841 /* Set transfer direction. */
2842 dir = qla1280_data_direction(cmd);
2843 pkt->control_flags |= cpu_to_le16(dir);
2844
2845 /* Set total data segment count. */
2846 pkt->dseg_count = cpu_to_le16(seg_cnt);
2847
2848 /*
2849 * Load data segments.
2850 */
2851 if (seg_cnt) { /* If data transfer. */
2852 struct scatterlist *sg, *s;
2853 int remseg = seg_cnt;
2854
2855 sg = scsi_sglist(cmd);
2856
2857 /* Setup packet address segment pointer. */
2858 dword_ptr = (u32 *)&pkt->dseg_0_address;
2859
2860 /* Load command entry data segments. */
2861 for_each_sg(sg, s, seg_cnt, cnt) {
2862 if (cnt == 2)
2863 break;
2864
2865 dma_handle = sg_dma_address(s);
2866 *dword_ptr++ =
2867 cpu_to_le32(lower_32_bits(dma_handle));
2868 *dword_ptr++ =
2869 cpu_to_le32(upper_32_bits(dma_handle));
2870 *dword_ptr++ = cpu_to_le32(sg_dma_len(s));
2871 dprintk(3, "S/G Segment phys_addr=%x %x, len=0x%x\n",
2872 cpu_to_le32(upper_32_bits(dma_handle)),
2873 cpu_to_le32(lower_32_bits(dma_handle)),
2874 cpu_to_le32(sg_dma_len(sg_next(s))));
2875 remseg--;
2876 }
2877 dprintk(5, "qla1280_64bit_start_scsi: Scatter/gather "
2878 "command packet data - b %i, t %i, l %i \n",
2879 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
2880 SCSI_LUN_32(cmd));
2881 qla1280_dump_buffer(5, (char *)pkt,
2882 REQUEST_ENTRY_SIZE);
2883
2884 /*
2885 * Build continuation packets.
2886 */
2887 dprintk(3, "S/G Building Continuation...seg_cnt=0x%x "
2888 "remains\n", seg_cnt);
2889
2890 while (remseg > 0) {
2891 /* Update sg start */
2892 sg = s;
2893 /* Adjust ring index. */
2894 ha->req_ring_index++;
2895 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
2896 ha->req_ring_index = 0;
2897 ha->request_ring_ptr =
2898 ha->request_ring;
2899 } else
2900 ha->request_ring_ptr++;
2901
2902 pkt = (cmd_a64_entry_t *)ha->request_ring_ptr;
2903
2904 /* Zero out packet. */
2905 memset(pkt, 0, REQUEST_ENTRY_SIZE);
2906
2907 /* Load packet defaults. */
2908 ((struct cont_a64_entry *) pkt)->entry_type =
2909 CONTINUE_A64_TYPE;
2910 ((struct cont_a64_entry *) pkt)->entry_count = 1;
2911 ((struct cont_a64_entry *) pkt)->sys_define =
2912 (uint8_t)ha->req_ring_index;
2913 /* Setup packet address segment pointer. */
2914 dword_ptr =
2915 (u32 *)&((struct cont_a64_entry *) pkt)->dseg_0_address;
2916
2917 /* Load continuation entry data segments. */
2918 for_each_sg(sg, s, remseg, cnt) {
2919 if (cnt == 5)
2920 break;
2921 dma_handle = sg_dma_address(s);
2922 *dword_ptr++ =
2923 cpu_to_le32(lower_32_bits(dma_handle));
2924 *dword_ptr++ =
2925 cpu_to_le32(upper_32_bits(dma_handle));
2926 *dword_ptr++ =
2927 cpu_to_le32(sg_dma_len(s));
2928 dprintk(3, "S/G Segment Cont. phys_addr=%x %x, len=0x%x\n",
2929 cpu_to_le32(upper_32_bits(dma_handle)),
2930 cpu_to_le32(lower_32_bits(dma_handle)),
2931 cpu_to_le32(sg_dma_len(s)));
2932 }
2933 remseg -= cnt;
2934 dprintk(5, "qla1280_64bit_start_scsi: "
2935 "continuation packet data - b %i, t "
2936 "%i, l %i \n", SCSI_BUS_32(cmd),
2937 SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
2938 qla1280_dump_buffer(5, (char *)pkt,
2939 REQUEST_ENTRY_SIZE);
2940 }
2941 } else { /* No data transfer */
2942 dprintk(5, "qla1280_64bit_start_scsi: No data, command "
2943 "packet data - b %i, t %i, l %i \n",
2944 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
2945 qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE);
2946 }
2947 /* Adjust ring index. */
2948 ha->req_ring_index++;
2949 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
2950 ha->req_ring_index = 0;
2951 ha->request_ring_ptr = ha->request_ring;
2952 } else
2953 ha->request_ring_ptr++;
2954
2955 /* Set chip new ring index. */
2956 dprintk(2,
2957 "qla1280_64bit_start_scsi: Wakeup RISC for pending command\n");
2958 sp->flags |= SRB_SENT;
2959 ha->actthreads++;
2960 WRT_REG_WORD(®->mailbox4, ha->req_ring_index);
2961
2962 out:
2963 if (status)
2964 dprintk(2, "qla1280_64bit_start_scsi: **** FAILED ****\n");
2965 else
2966 dprintk(3, "qla1280_64bit_start_scsi: exiting normally\n");
2967
2968 return status;
2969}
2970#else /* !QLA_64BIT_PTR */
2971
2972/*
2973 * qla1280_32bit_start_scsi
2974 * The start SCSI is responsible for building request packets on
2975 * request ring and modifying ISP input pointer.
2976 *
2977 * The Qlogic firmware interface allows every queue slot to have a SCSI
2978 * command and up to 4 scatter/gather (SG) entries. If we need more
2979 * than 4 SG entries, then continuation entries are used that can
2980 * hold another 7 entries each. The start routine determines if there
2981 * is eought empty slots then build the combination of requests to
2982 * fulfill the OS request.
2983 *
2984 * Input:
2985 * ha = adapter block pointer.
2986 * sp = SCSI Request Block structure pointer.
2987 *
2988 * Returns:
2989 * 0 = success, was able to issue command.
2990 */
2991static int
2992qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
2993{
2994 struct device_reg __iomem *reg = ha->iobase;
2995 struct scsi_cmnd *cmd = sp->cmd;
2996 struct cmd_entry *pkt;
2997 __le32 *dword_ptr;
2998 int status = 0;
2999 int cnt;
3000 int req_cnt;
3001 int seg_cnt;
3002 u8 dir;
3003
3004 ENTER("qla1280_32bit_start_scsi");
3005
3006 dprintk(1, "32bit_start: cmd=%p sp=%p CDB=%x\n", cmd, sp,
3007 cmd->cmnd[0]);
3008
3009 /* Calculate number of entries and segments required. */
3010 req_cnt = 1;
3011 seg_cnt = scsi_dma_map(cmd);
3012 if (seg_cnt) {
3013 /*
3014 * if greater than four sg entries then we need to allocate
3015 * continuation entries
3016 */
3017 if (seg_cnt > 4) {
3018 req_cnt += (seg_cnt - 4) / 7;
3019 if ((seg_cnt - 4) % 7)
3020 req_cnt++;
3021 }
3022 dprintk(3, "S/G Transfer cmd=%p seg_cnt=0x%x, req_cnt=%x\n",
3023 cmd, seg_cnt, req_cnt);
3024 } else if (seg_cnt < 0) {
3025 status = 1;
3026 goto out;
3027 }
3028
3029 if ((req_cnt + 2) >= ha->req_q_cnt) {
3030 /* Calculate number of free request entries. */
3031 cnt = RD_REG_WORD(®->mailbox4);
3032 if (ha->req_ring_index < cnt)
3033 ha->req_q_cnt = cnt - ha->req_ring_index;
3034 else
3035 ha->req_q_cnt =
3036 REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
3037 }
3038
3039 dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x\n",
3040 ha->req_q_cnt, seg_cnt);
3041 /* If room for request in request ring. */
3042 if ((req_cnt + 2) >= ha->req_q_cnt) {
3043 status = SCSI_MLQUEUE_HOST_BUSY;
3044 dprintk(2, "qla1280_32bit_start_scsi: in-ptr=0x%x, "
3045 "req_q_cnt=0x%x, req_cnt=0x%x", ha->req_ring_index,
3046 ha->req_q_cnt, req_cnt);
3047 goto out;
3048 }
3049
3050 /* Check for empty slot in outstanding command list. */
3051 for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&
3052 (ha->outstanding_cmds[cnt] != 0); cnt++) ;
3053
3054 if (cnt >= MAX_OUTSTANDING_COMMANDS) {
3055 status = SCSI_MLQUEUE_HOST_BUSY;
3056 dprintk(2, "qla1280_32bit_start_scsi: NO ROOM IN OUTSTANDING "
3057 "ARRAY, req_q_cnt=0x%x\n", ha->req_q_cnt);
3058 goto out;
3059 }
3060
3061 CMD_HANDLE(sp->cmd) = (unsigned char *) (unsigned long)(cnt + 1);
3062 ha->outstanding_cmds[cnt] = sp;
3063 ha->req_q_cnt -= req_cnt;
3064
3065 /*
3066 * Build command packet.
3067 */
3068 pkt = (struct cmd_entry *) ha->request_ring_ptr;
3069
3070 pkt->entry_type = COMMAND_TYPE;
3071 pkt->entry_count = (uint8_t) req_cnt;
3072 pkt->sys_define = (uint8_t) ha->req_ring_index;
3073 pkt->entry_status = 0;
3074 pkt->handle = cpu_to_le32(cnt);
3075
3076 /* Zero out remaining portion of packet. */
3077 memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8));
3078
3079 /* Set ISP command timeout. */
3080 pkt->timeout = cpu_to_le16(cmd->request->timeout/HZ);
3081
3082 /* Set device target ID and LUN */
3083 pkt->lun = SCSI_LUN_32(cmd);
3084 pkt->target = SCSI_BUS_32(cmd) ?
3085 (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
3086
3087 /* Enable simple tag queuing if device supports it. */
3088 if (cmd->device->simple_tags)
3089 pkt->control_flags |= cpu_to_le16(BIT_3);
3090
3091 /* Load SCSI command packet. */
3092 pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
3093 memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));
3094
3095 /*dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
3096 /* Set transfer direction. */
3097 dir = qla1280_data_direction(cmd);
3098 pkt->control_flags |= cpu_to_le16(dir);
3099
3100 /* Set total data segment count. */
3101 pkt->dseg_count = cpu_to_le16(seg_cnt);
3102
3103 /*
3104 * Load data segments.
3105 */
3106 if (seg_cnt) {
3107 struct scatterlist *sg, *s;
3108 int remseg = seg_cnt;
3109
3110 sg = scsi_sglist(cmd);
3111
3112 /* Setup packet address segment pointer. */
3113 dword_ptr = &pkt->dseg_0_address;
3114
3115 dprintk(3, "Building S/G data segments..\n");
3116 qla1280_dump_buffer(1, (char *)sg, 4 * 16);
3117
3118 /* Load command entry data segments. */
3119 for_each_sg(sg, s, seg_cnt, cnt) {
3120 if (cnt == 4)
3121 break;
3122 *dword_ptr++ =
3123 cpu_to_le32(lower_32_bits(sg_dma_address(s)));
3124 *dword_ptr++ = cpu_to_le32(sg_dma_len(s));
3125 dprintk(3, "S/G Segment phys_addr=0x%lx, len=0x%x\n",
3126 (lower_32_bits(sg_dma_address(s))),
3127 (sg_dma_len(s)));
3128 remseg--;
3129 }
3130 /*
3131 * Build continuation packets.
3132 */
3133 dprintk(3, "S/G Building Continuation"
3134 "...seg_cnt=0x%x remains\n", seg_cnt);
3135 while (remseg > 0) {
3136 /* Continue from end point */
3137 sg = s;
3138 /* Adjust ring index. */
3139 ha->req_ring_index++;
3140 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
3141 ha->req_ring_index = 0;
3142 ha->request_ring_ptr =
3143 ha->request_ring;
3144 } else
3145 ha->request_ring_ptr++;
3146
3147 pkt = (struct cmd_entry *)ha->request_ring_ptr;
3148
3149 /* Zero out packet. */
3150 memset(pkt, 0, REQUEST_ENTRY_SIZE);
3151
3152 /* Load packet defaults. */
3153 ((struct cont_entry *) pkt)->
3154 entry_type = CONTINUE_TYPE;
3155 ((struct cont_entry *) pkt)->entry_count = 1;
3156
3157 ((struct cont_entry *) pkt)->sys_define =
3158 (uint8_t) ha->req_ring_index;
3159
3160 /* Setup packet address segment pointer. */
3161 dword_ptr =
3162 &((struct cont_entry *) pkt)->dseg_0_address;
3163
3164 /* Load continuation entry data segments. */
3165 for_each_sg(sg, s, remseg, cnt) {
3166 if (cnt == 7)
3167 break;
3168 *dword_ptr++ =
3169 cpu_to_le32(lower_32_bits(sg_dma_address(s)));
3170 *dword_ptr++ =
3171 cpu_to_le32(sg_dma_len(s));
3172 dprintk(1,
3173 "S/G Segment Cont. phys_addr=0x%x, "
3174 "len=0x%x\n",
3175 cpu_to_le32(lower_32_bits(sg_dma_address(s))),
3176 cpu_to_le32(sg_dma_len(s)));
3177 }
3178 remseg -= cnt;
3179 dprintk(5, "qla1280_32bit_start_scsi: "
3180 "continuation packet data - "
3181 "scsi(%i:%i:%i)\n", SCSI_BUS_32(cmd),
3182 SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
3183 qla1280_dump_buffer(5, (char *)pkt,
3184 REQUEST_ENTRY_SIZE);
3185 }
3186 } else { /* No data transfer at all */
3187 dprintk(5, "qla1280_32bit_start_scsi: No data, command "
3188 "packet data - \n");
3189 qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE);
3190 }
3191 dprintk(5, "qla1280_32bit_start_scsi: First IOCB block:\n");
3192 qla1280_dump_buffer(5, (char *)ha->request_ring_ptr,
3193 REQUEST_ENTRY_SIZE);
3194
3195 /* Adjust ring index. */
3196 ha->req_ring_index++;
3197 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
3198 ha->req_ring_index = 0;
3199 ha->request_ring_ptr = ha->request_ring;
3200 } else
3201 ha->request_ring_ptr++;
3202
3203 /* Set chip new ring index. */
3204 dprintk(2, "qla1280_32bit_start_scsi: Wakeup RISC "
3205 "for pending command\n");
3206 sp->flags |= SRB_SENT;
3207 ha->actthreads++;
3208 WRT_REG_WORD(®->mailbox4, ha->req_ring_index);
3209
3210out:
3211 if (status)
3212 dprintk(2, "qla1280_32bit_start_scsi: **** FAILED ****\n");
3213
3214 LEAVE("qla1280_32bit_start_scsi");
3215
3216 return status;
3217}
3218#endif
3219
3220/*
3221 * qla1280_req_pkt
3222 * Function is responsible for locking ring and
3223 * getting a zeroed out request packet.
3224 *
3225 * Input:
3226 * ha = adapter block pointer.
3227 *
3228 * Returns:
3229 * 0 = failed to get slot.
3230 */
3231static request_t *
3232qla1280_req_pkt(struct scsi_qla_host *ha)
3233{
3234 struct device_reg __iomem *reg = ha->iobase;
3235 request_t *pkt = NULL;
3236 int cnt;
3237 uint32_t timer;
3238
3239 ENTER("qla1280_req_pkt");
3240
3241 /*
3242 * This can be called from interrupt context, damn it!!!
3243 */
3244 /* Wait for 30 seconds for slot. */
3245 for (timer = 15000000; timer; timer--) {
3246 if (ha->req_q_cnt > 0) {
3247 /* Calculate number of free request entries. */
3248 cnt = RD_REG_WORD(®->mailbox4);
3249 if (ha->req_ring_index < cnt)
3250 ha->req_q_cnt = cnt - ha->req_ring_index;
3251 else
3252 ha->req_q_cnt =
3253 REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
3254 }
3255
3256 /* Found empty request ring slot? */
3257 if (ha->req_q_cnt > 0) {
3258 ha->req_q_cnt--;
3259 pkt = ha->request_ring_ptr;
3260
3261 /* Zero out packet. */
3262 memset(pkt, 0, REQUEST_ENTRY_SIZE);
3263
3264 /*
3265 * How can this be right when we have a ring
3266 * size of 512???
3267 */
3268 /* Set system defined field. */
3269 pkt->sys_define = (uint8_t) ha->req_ring_index;
3270
3271 /* Set entry count. */
3272 pkt->entry_count = 1;
3273
3274 break;
3275 }
3276
3277 udelay(2); /* 10 */
3278
3279 /* Check for pending interrupts. */
3280 qla1280_poll(ha);
3281 }
3282
3283 if (!pkt)
3284 dprintk(2, "qla1280_req_pkt: **** FAILED ****\n");
3285 else
3286 dprintk(3, "qla1280_req_pkt: exiting normally\n");
3287
3288 return pkt;
3289}
3290
3291/*
3292 * qla1280_isp_cmd
3293 * Function is responsible for modifying ISP input pointer.
3294 * Releases ring lock.
3295 *
3296 * Input:
3297 * ha = adapter block pointer.
3298 */
3299static void
3300qla1280_isp_cmd(struct scsi_qla_host *ha)
3301{
3302 struct device_reg __iomem *reg = ha->iobase;
3303
3304 ENTER("qla1280_isp_cmd");
3305
3306 dprintk(5, "qla1280_isp_cmd: IOCB data:\n");
3307 qla1280_dump_buffer(5, (char *)ha->request_ring_ptr,
3308 REQUEST_ENTRY_SIZE);
3309
3310 /* Adjust ring index. */
3311 ha->req_ring_index++;
3312 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
3313 ha->req_ring_index = 0;
3314 ha->request_ring_ptr = ha->request_ring;
3315 } else
3316 ha->request_ring_ptr++;
3317
3318 /*
3319 * Update request index to mailbox4 (Request Queue In).
3320 */
3321 WRT_REG_WORD(®->mailbox4, ha->req_ring_index);
3322
3323 LEAVE("qla1280_isp_cmd");
3324}
3325
3326/****************************************************************************/
3327/* Interrupt Service Routine. */
3328/****************************************************************************/
3329
3330/****************************************************************************
3331 * qla1280_isr
3332 * Calls I/O done on command completion.
3333 *
3334 * Input:
3335 * ha = adapter block pointer.
3336 * done_q = done queue.
3337 ****************************************************************************/
3338static void
3339qla1280_isr(struct scsi_qla_host *ha, struct list_head *done_q)
3340{
3341 struct device_reg __iomem *reg = ha->iobase;
3342 struct response *pkt;
3343 struct srb *sp = NULL;
3344 uint16_t mailbox[MAILBOX_REGISTER_COUNT];
3345 uint16_t *wptr;
3346 uint32_t index;
3347 u16 istatus;
3348
3349 ENTER("qla1280_isr");
3350
3351 istatus = RD_REG_WORD(®->istatus);
3352 if (!(istatus & (RISC_INT | PCI_INT)))
3353 return;
3354
3355 /* Save mailbox register 5 */
3356 mailbox[5] = RD_REG_WORD(®->mailbox5);
3357
3358 /* Check for mailbox interrupt. */
3359
3360 mailbox[0] = RD_REG_WORD_dmasync(®->semaphore);
3361
3362 if (mailbox[0] & BIT_0) {
3363 /* Get mailbox data. */
3364 /* dprintk(1, "qla1280_isr: In Get mailbox data \n"); */
3365
3366 wptr = &mailbox[0];
3367 *wptr++ = RD_REG_WORD(®->mailbox0);
3368 *wptr++ = RD_REG_WORD(®->mailbox1);
3369 *wptr = RD_REG_WORD(®->mailbox2);
3370 if (mailbox[0] != MBA_SCSI_COMPLETION) {
3371 wptr++;
3372 *wptr++ = RD_REG_WORD(®->mailbox3);
3373 *wptr++ = RD_REG_WORD(®->mailbox4);
3374 wptr++;
3375 *wptr++ = RD_REG_WORD(®->mailbox6);
3376 *wptr = RD_REG_WORD(®->mailbox7);
3377 }
3378
3379 /* Release mailbox registers. */
3380
3381 WRT_REG_WORD(®->semaphore, 0);
3382 WRT_REG_WORD(®->host_cmd, HC_CLR_RISC_INT);
3383
3384 dprintk(5, "qla1280_isr: mailbox interrupt mailbox[0] = 0x%x",
3385 mailbox[0]);
3386
3387 /* Handle asynchronous event */
3388 switch (mailbox[0]) {
3389 case MBA_SCSI_COMPLETION: /* Response completion */
3390 dprintk(5, "qla1280_isr: mailbox SCSI response "
3391 "completion\n");
3392
3393 if (ha->flags.online) {
3394 /* Get outstanding command index. */
3395 index = mailbox[2] << 16 | mailbox[1];
3396
3397 /* Validate handle. */
3398 if (index < MAX_OUTSTANDING_COMMANDS)
3399 sp = ha->outstanding_cmds[index];
3400 else
3401 sp = NULL;
3402
3403 if (sp) {
3404 /* Free outstanding command slot. */
3405 ha->outstanding_cmds[index] = NULL;
3406
3407 /* Save ISP completion status */
3408 CMD_RESULT(sp->cmd) = 0;
3409 CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
3410
3411 /* Place block on done queue */
3412 list_add_tail(&sp->list, done_q);
3413 } else {
3414 /*
3415 * If we get here we have a real problem!
3416 */
3417 printk(KERN_WARNING
3418 "qla1280: ISP invalid handle\n");
3419 }
3420 }
3421 break;
3422
3423 case MBA_BUS_RESET: /* SCSI Bus Reset */
3424 ha->flags.reset_marker = 1;
3425 index = mailbox[6] & BIT_0;
3426 ha->bus_settings[index].reset_marker = 1;
3427
3428 printk(KERN_DEBUG "qla1280_isr(): index %i "
3429 "asynchronous BUS_RESET\n", index);
3430 break;
3431
3432 case MBA_SYSTEM_ERR: /* System Error */
3433 printk(KERN_WARNING
3434 "qla1280: ISP System Error - mbx1=%xh, mbx2="
3435 "%xh, mbx3=%xh\n", mailbox[1], mailbox[2],
3436 mailbox[3]);
3437 break;
3438
3439 case MBA_REQ_TRANSFER_ERR: /* Request Transfer Error */
3440 printk(KERN_WARNING
3441 "qla1280: ISP Request Transfer Error\n");
3442 break;
3443
3444 case MBA_RSP_TRANSFER_ERR: /* Response Transfer Error */
3445 printk(KERN_WARNING
3446 "qla1280: ISP Response Transfer Error\n");
3447 break;
3448
3449 case MBA_WAKEUP_THRES: /* Request Queue Wake-up */
3450 dprintk(2, "qla1280_isr: asynchronous WAKEUP_THRES\n");
3451 break;
3452
3453 case MBA_TIMEOUT_RESET: /* Execution Timeout Reset */
3454 dprintk(2,
3455 "qla1280_isr: asynchronous TIMEOUT_RESET\n");
3456 break;
3457
3458 case MBA_DEVICE_RESET: /* Bus Device Reset */
3459 printk(KERN_INFO "qla1280_isr(): asynchronous "
3460 "BUS_DEVICE_RESET\n");
3461
3462 ha->flags.reset_marker = 1;
3463 index = mailbox[6] & BIT_0;
3464 ha->bus_settings[index].reset_marker = 1;
3465 break;
3466
3467 case MBA_BUS_MODE_CHANGE:
3468 dprintk(2,
3469 "qla1280_isr: asynchronous BUS_MODE_CHANGE\n");
3470 break;
3471
3472 default:
3473 /* dprintk(1, "qla1280_isr: default case of switch MB \n"); */
3474 if (mailbox[0] < MBA_ASYNC_EVENT) {
3475 wptr = &mailbox[0];
3476 memcpy((uint16_t *) ha->mailbox_out, wptr,
3477 MAILBOX_REGISTER_COUNT *
3478 sizeof(uint16_t));
3479
3480 if(ha->mailbox_wait != NULL)
3481 complete(ha->mailbox_wait);
3482 }
3483 break;
3484 }
3485 } else {
3486 WRT_REG_WORD(®->host_cmd, HC_CLR_RISC_INT);
3487 }
3488
3489 /*
3490 * We will receive interrupts during mailbox testing prior to
3491 * the card being marked online, hence the double check.
3492 */
3493 if (!(ha->flags.online && !ha->mailbox_wait)) {
3494 dprintk(2, "qla1280_isr: Response pointer Error\n");
3495 goto out;
3496 }
3497
3498 if (mailbox[5] >= RESPONSE_ENTRY_CNT)
3499 goto out;
3500
3501 while (ha->rsp_ring_index != mailbox[5]) {
3502 pkt = ha->response_ring_ptr;
3503
3504 dprintk(5, "qla1280_isr: ha->rsp_ring_index = 0x%x, mailbox[5]"
3505 " = 0x%x\n", ha->rsp_ring_index, mailbox[5]);
3506 dprintk(5,"qla1280_isr: response packet data\n");
3507 qla1280_dump_buffer(5, (char *)pkt, RESPONSE_ENTRY_SIZE);
3508
3509 if (pkt->entry_type == STATUS_TYPE) {
3510 if ((le16_to_cpu(pkt->scsi_status) & 0xff)
3511 || pkt->comp_status || pkt->entry_status) {
3512 dprintk(2, "qla1280_isr: ha->rsp_ring_index = "
3513 "0x%x mailbox[5] = 0x%x, comp_status "
3514 "= 0x%x, scsi_status = 0x%x\n",
3515 ha->rsp_ring_index, mailbox[5],
3516 le16_to_cpu(pkt->comp_status),
3517 le16_to_cpu(pkt->scsi_status));
3518 }
3519 } else {
3520 dprintk(2, "qla1280_isr: ha->rsp_ring_index = "
3521 "0x%x, mailbox[5] = 0x%x\n",
3522 ha->rsp_ring_index, mailbox[5]);
3523 dprintk(2, "qla1280_isr: response packet data\n");
3524 qla1280_dump_buffer(2, (char *)pkt,
3525 RESPONSE_ENTRY_SIZE);
3526 }
3527
3528 if (pkt->entry_type == STATUS_TYPE || pkt->entry_status) {
3529 dprintk(2, "status: Cmd %p, handle %i\n",
3530 ha->outstanding_cmds[pkt->handle]->cmd,
3531 pkt->handle);
3532 if (pkt->entry_type == STATUS_TYPE)
3533 qla1280_status_entry(ha, pkt, done_q);
3534 else
3535 qla1280_error_entry(ha, pkt, done_q);
3536 /* Adjust ring index. */
3537 ha->rsp_ring_index++;
3538 if (ha->rsp_ring_index == RESPONSE_ENTRY_CNT) {
3539 ha->rsp_ring_index = 0;
3540 ha->response_ring_ptr = ha->response_ring;
3541 } else
3542 ha->response_ring_ptr++;
3543 WRT_REG_WORD(®->mailbox5, ha->rsp_ring_index);
3544 }
3545 }
3546
3547 out:
3548 LEAVE("qla1280_isr");
3549}
3550
3551/*
3552 * qla1280_rst_aen
3553 * Processes asynchronous reset.
3554 *
3555 * Input:
3556 * ha = adapter block pointer.
3557 */
3558static void
3559qla1280_rst_aen(struct scsi_qla_host *ha)
3560{
3561 uint8_t bus;
3562
3563 ENTER("qla1280_rst_aen");
3564
3565 if (ha->flags.online && !ha->flags.reset_active &&
3566 !ha->flags.abort_isp_active) {
3567 ha->flags.reset_active = 1;
3568 while (ha->flags.reset_marker) {
3569 /* Issue marker command. */
3570 ha->flags.reset_marker = 0;
3571 for (bus = 0; bus < ha->ports &&
3572 !ha->flags.reset_marker; bus++) {
3573 if (ha->bus_settings[bus].reset_marker) {
3574 ha->bus_settings[bus].reset_marker = 0;
3575 qla1280_marker(ha, bus, 0, 0,
3576 MK_SYNC_ALL);
3577 }
3578 }
3579 }
3580 }
3581
3582 LEAVE("qla1280_rst_aen");
3583}
3584
3585
3586/*
3587 * qla1280_status_entry
3588 * Processes received ISP status entry.
3589 *
3590 * Input:
3591 * ha = adapter block pointer.
3592 * pkt = entry pointer.
3593 * done_q = done queue.
3594 */
3595static void
3596qla1280_status_entry(struct scsi_qla_host *ha, struct response *pkt,
3597 struct list_head *done_q)
3598{
3599 unsigned int bus, target, lun;
3600 int sense_sz;
3601 struct srb *sp;
3602 struct scsi_cmnd *cmd;
3603 uint32_t handle = le32_to_cpu(pkt->handle);
3604 uint16_t scsi_status = le16_to_cpu(pkt->scsi_status);
3605 uint16_t comp_status = le16_to_cpu(pkt->comp_status);
3606
3607 ENTER("qla1280_status_entry");
3608
3609 /* Validate handle. */
3610 if (handle < MAX_OUTSTANDING_COMMANDS)
3611 sp = ha->outstanding_cmds[handle];
3612 else
3613 sp = NULL;
3614
3615 if (!sp) {
3616 printk(KERN_WARNING "qla1280: Status Entry invalid handle\n");
3617 goto out;
3618 }
3619
3620 /* Free outstanding command slot. */
3621 ha->outstanding_cmds[handle] = NULL;
3622
3623 cmd = sp->cmd;
3624
3625 /* Generate LU queue on cntrl, target, LUN */
3626 bus = SCSI_BUS_32(cmd);
3627 target = SCSI_TCN_32(cmd);
3628 lun = SCSI_LUN_32(cmd);
3629
3630 if (comp_status || scsi_status) {
3631 dprintk(3, "scsi: comp_status = 0x%x, scsi_status = "
3632 "0x%x, handle = 0x%x\n", comp_status,
3633 scsi_status, handle);
3634 }
3635
3636 /* Target busy or queue full */
3637 if ((scsi_status & 0xFF) == SAM_STAT_TASK_SET_FULL ||
3638 (scsi_status & 0xFF) == SAM_STAT_BUSY) {
3639 CMD_RESULT(cmd) = scsi_status & 0xff;
3640 } else {
3641
3642 /* Save ISP completion status */
3643 CMD_RESULT(cmd) = qla1280_return_status(pkt, cmd);
3644
3645 if (scsi_status & SAM_STAT_CHECK_CONDITION) {
3646 if (comp_status != CS_ARS_FAILED) {
3647 uint16_t req_sense_length =
3648 le16_to_cpu(pkt->req_sense_length);
3649 if (req_sense_length < CMD_SNSLEN(cmd))
3650 sense_sz = req_sense_length;
3651 else
3652 /*
3653 * scsi_cmnd->sense_buffer is
3654 * 64 bytes, why only copy 63?
3655 * This looks wrong! /Jes
3656 */
3657 sense_sz = CMD_SNSLEN(cmd) - 1;
3658
3659 memcpy(cmd->sense_buffer,
3660 &pkt->req_sense_data, sense_sz);
3661 } else
3662 sense_sz = 0;
3663 memset(cmd->sense_buffer + sense_sz, 0,
3664 SCSI_SENSE_BUFFERSIZE - sense_sz);
3665
3666 dprintk(2, "qla1280_status_entry: Check "
3667 "condition Sense data, b %i, t %i, "
3668 "l %i\n", bus, target, lun);
3669 if (sense_sz)
3670 qla1280_dump_buffer(2,
3671 (char *)cmd->sense_buffer,
3672 sense_sz);
3673 }
3674 }
3675
3676 CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
3677
3678 /* Place command on done queue. */
3679 list_add_tail(&sp->list, done_q);
3680 out:
3681 LEAVE("qla1280_status_entry");
3682}
3683
3684/*
3685 * qla1280_error_entry
3686 * Processes error entry.
3687 *
3688 * Input:
3689 * ha = adapter block pointer.
3690 * pkt = entry pointer.
3691 * done_q = done queue.
3692 */
3693static void
3694qla1280_error_entry(struct scsi_qla_host *ha, struct response *pkt,
3695 struct list_head *done_q)
3696{
3697 struct srb *sp;
3698 uint32_t handle = le32_to_cpu(pkt->handle);
3699
3700 ENTER("qla1280_error_entry");
3701
3702 if (pkt->entry_status & BIT_3)
3703 dprintk(2, "qla1280_error_entry: BAD PAYLOAD flag error\n");
3704 else if (pkt->entry_status & BIT_2)
3705 dprintk(2, "qla1280_error_entry: BAD HEADER flag error\n");
3706 else if (pkt->entry_status & BIT_1)
3707 dprintk(2, "qla1280_error_entry: FULL flag error\n");
3708 else
3709 dprintk(2, "qla1280_error_entry: UNKNOWN flag error\n");
3710
3711 /* Validate handle. */
3712 if (handle < MAX_OUTSTANDING_COMMANDS)
3713 sp = ha->outstanding_cmds[handle];
3714 else
3715 sp = NULL;
3716
3717 if (sp) {
3718 /* Free outstanding command slot. */
3719 ha->outstanding_cmds[handle] = NULL;
3720
3721 /* Bad payload or header */
3722 if (pkt->entry_status & (BIT_3 + BIT_2)) {
3723 /* Bad payload or header, set error status. */
3724 /* CMD_RESULT(sp->cmd) = CS_BAD_PAYLOAD; */
3725 CMD_RESULT(sp->cmd) = DID_ERROR << 16;
3726 } else if (pkt->entry_status & BIT_1) { /* FULL flag */
3727 CMD_RESULT(sp->cmd) = DID_BUS_BUSY << 16;
3728 } else {
3729 /* Set error status. */
3730 CMD_RESULT(sp->cmd) = DID_ERROR << 16;
3731 }
3732
3733 CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
3734
3735 /* Place command on done queue. */
3736 list_add_tail(&sp->list, done_q);
3737 }
3738#ifdef QLA_64BIT_PTR
3739 else if (pkt->entry_type == COMMAND_A64_TYPE) {
3740 printk(KERN_WARNING "!qla1280: Error Entry invalid handle");
3741 }
3742#endif
3743
3744 LEAVE("qla1280_error_entry");
3745}
3746
3747/*
3748 * qla1280_abort_isp
3749 * Resets ISP and aborts all outstanding commands.
3750 *
3751 * Input:
3752 * ha = adapter block pointer.
3753 *
3754 * Returns:
3755 * 0 = success
3756 */
3757static int
3758qla1280_abort_isp(struct scsi_qla_host *ha)
3759{
3760 struct device_reg __iomem *reg = ha->iobase;
3761 struct srb *sp;
3762 int status = 0;
3763 int cnt;
3764 int bus;
3765
3766 ENTER("qla1280_abort_isp");
3767
3768 if (ha->flags.abort_isp_active || !ha->flags.online)
3769 goto out;
3770
3771 ha->flags.abort_isp_active = 1;
3772
3773 /* Disable ISP interrupts. */
3774 qla1280_disable_intrs(ha);
3775 WRT_REG_WORD(®->host_cmd, HC_PAUSE_RISC);
3776 RD_REG_WORD(®->id_l);
3777
3778 printk(KERN_INFO "scsi(%li): dequeuing outstanding commands\n",
3779 ha->host_no);
3780 /* Dequeue all commands in outstanding command list. */
3781 for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
3782 struct scsi_cmnd *cmd;
3783 sp = ha->outstanding_cmds[cnt];
3784 if (sp) {
3785 cmd = sp->cmd;
3786 CMD_RESULT(cmd) = DID_RESET << 16;
3787 CMD_HANDLE(cmd) = COMPLETED_HANDLE;
3788 ha->outstanding_cmds[cnt] = NULL;
3789 list_add_tail(&sp->list, &ha->done_q);
3790 }
3791 }
3792
3793 qla1280_done(ha);
3794
3795 status = qla1280_load_firmware(ha);
3796 if (status)
3797 goto out;
3798
3799 /* Setup adapter based on NVRAM parameters. */
3800 qla1280_nvram_config (ha);
3801
3802 status = qla1280_init_rings(ha);
3803 if (status)
3804 goto out;
3805
3806 /* Issue SCSI reset. */
3807 for (bus = 0; bus < ha->ports; bus++)
3808 qla1280_bus_reset(ha, bus);
3809
3810 ha->flags.abort_isp_active = 0;
3811 out:
3812 if (status) {
3813 printk(KERN_WARNING
3814 "qla1280: ISP error recovery failed, board disabled");
3815 qla1280_reset_adapter(ha);
3816 dprintk(2, "qla1280_abort_isp: **** FAILED ****\n");
3817 }
3818
3819 LEAVE("qla1280_abort_isp");
3820 return status;
3821}
3822
3823
3824/*
3825 * qla1280_debounce_register
3826 * Debounce register.
3827 *
3828 * Input:
3829 * port = register address.
3830 *
3831 * Returns:
3832 * register value.
3833 */
3834static u16
3835qla1280_debounce_register(volatile u16 __iomem * addr)
3836{
3837 volatile u16 ret;
3838 volatile u16 ret2;
3839
3840 ret = RD_REG_WORD(addr);
3841 ret2 = RD_REG_WORD(addr);
3842
3843 if (ret == ret2)
3844 return ret;
3845
3846 do {
3847 cpu_relax();
3848 ret = RD_REG_WORD(addr);
3849 ret2 = RD_REG_WORD(addr);
3850 } while (ret != ret2);
3851
3852 return ret;
3853}
3854
3855
3856/************************************************************************
3857 * qla1280_check_for_dead_scsi_bus *
3858 * *
3859 * This routine checks for a dead SCSI bus *
3860 ************************************************************************/
3861#define SET_SXP_BANK 0x0100
3862#define SCSI_PHASE_INVALID 0x87FF
3863static int
3864qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *ha, unsigned int bus)
3865{
3866 uint16_t config_reg, scsi_control;
3867 struct device_reg __iomem *reg = ha->iobase;
3868
3869 if (ha->bus_settings[bus].scsi_bus_dead) {
3870 WRT_REG_WORD(®->host_cmd, HC_PAUSE_RISC);
3871 config_reg = RD_REG_WORD(®->cfg_1);
3872 WRT_REG_WORD(®->cfg_1, SET_SXP_BANK);
3873 scsi_control = RD_REG_WORD(®->scsiControlPins);
3874 WRT_REG_WORD(®->cfg_1, config_reg);
3875 WRT_REG_WORD(®->host_cmd, HC_RELEASE_RISC);
3876
3877 if (scsi_control == SCSI_PHASE_INVALID) {
3878 ha->bus_settings[bus].scsi_bus_dead = 1;
3879 return 1; /* bus is dead */
3880 } else {
3881 ha->bus_settings[bus].scsi_bus_dead = 0;
3882 ha->bus_settings[bus].failed_reset_count = 0;
3883 }
3884 }
3885 return 0; /* bus is not dead */
3886}
3887
3888static void
3889qla1280_get_target_parameters(struct scsi_qla_host *ha,
3890 struct scsi_device *device)
3891{
3892 uint16_t mb[MAILBOX_REGISTER_COUNT];
3893 int bus, target, lun;
3894
3895 bus = device->channel;
3896 target = device->id;
3897 lun = device->lun;
3898
3899
3900 mb[0] = MBC_GET_TARGET_PARAMETERS;
3901 mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
3902 mb[1] <<= 8;
3903 qla1280_mailbox_command(ha, BIT_6 | BIT_3 | BIT_2 | BIT_1 | BIT_0,
3904 &mb[0]);
3905
3906 printk(KERN_INFO "scsi(%li:%d:%d:%d):", ha->host_no, bus, target, lun);
3907
3908 if (mb[3] != 0) {
3909 printk(" Sync: period %d, offset %d",
3910 (mb[3] & 0xff), (mb[3] >> 8));
3911 if (mb[2] & BIT_13)
3912 printk(", Wide");
3913 if ((mb[2] & BIT_5) && ((mb[6] >> 8) & 0xff) >= 2)
3914 printk(", DT");
3915 } else
3916 printk(" Async");
3917
3918 if (device->simple_tags)
3919 printk(", Tagged queuing: depth %d", device->queue_depth);
3920 printk("\n");
3921}
3922
3923
3924#if DEBUG_QLA1280
3925static void
3926__qla1280_dump_buffer(char *b, int size)
3927{
3928 int cnt;
3929 u8 c;
3930
3931 printk(KERN_DEBUG " 0 1 2 3 4 5 6 7 8 9 Ah "
3932 "Bh Ch Dh Eh Fh\n");
3933 printk(KERN_DEBUG "---------------------------------------------"
3934 "------------------\n");
3935
3936 for (cnt = 0; cnt < size;) {
3937 c = *b++;
3938
3939 printk("0x%02x", c);
3940 cnt++;
3941 if (!(cnt % 16))
3942 printk("\n");
3943 else
3944 printk(" ");
3945 }
3946 if (cnt % 16)
3947 printk("\n");
3948}
3949
3950/**************************************************************************
3951 * ql1280_print_scsi_cmd
3952 *
3953 **************************************************************************/
3954static void
3955__qla1280_print_scsi_cmd(struct scsi_cmnd *cmd)
3956{
3957 struct scsi_qla_host *ha;
3958 struct Scsi_Host *host = CMD_HOST(cmd);
3959 struct srb *sp;
3960 /* struct scatterlist *sg; */
3961
3962 int i;
3963 ha = (struct scsi_qla_host *)host->hostdata;
3964
3965 sp = (struct srb *)CMD_SP(cmd);
3966 printk("SCSI Command @= 0x%p, Handle=0x%p\n", cmd, CMD_HANDLE(cmd));
3967 printk(" chan=%d, target = 0x%02x, lun = 0x%02x, cmd_len = 0x%02x\n",
3968 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd),
3969 CMD_CDBLEN(cmd));
3970 printk(" CDB = ");
3971 for (i = 0; i < cmd->cmd_len; i++) {
3972 printk("0x%02x ", cmd->cmnd[i]);
3973 }
3974 printk(" seg_cnt =%d\n", scsi_sg_count(cmd));
3975 printk(" request buffer=0x%p, request buffer len=0x%x\n",
3976 scsi_sglist(cmd), scsi_bufflen(cmd));
3977 /* if (cmd->use_sg)
3978 {
3979 sg = (struct scatterlist *) cmd->request_buffer;
3980 printk(" SG buffer: \n");
3981 qla1280_dump_buffer(1, (char *)sg, (cmd->use_sg*sizeof(struct scatterlist)));
3982 } */
3983 printk(" tag=%d, transfersize=0x%x \n",
3984 cmd->tag, cmd->transfersize);
3985 printk(" SP=0x%p\n", CMD_SP(cmd));
3986 printk(" underflow size = 0x%x, direction=0x%x\n",
3987 cmd->underflow, cmd->sc_data_direction);
3988}
3989
3990/**************************************************************************
3991 * ql1280_dump_device
3992 *
3993 **************************************************************************/
3994static void
3995ql1280_dump_device(struct scsi_qla_host *ha)
3996{
3997
3998 struct scsi_cmnd *cp;
3999 struct srb *sp;
4000 int i;
4001
4002 printk(KERN_DEBUG "Outstanding Commands on controller:\n");
4003
4004 for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
4005 if ((sp = ha->outstanding_cmds[i]) == NULL)
4006 continue;
4007 if ((cp = sp->cmd) == NULL)
4008 continue;
4009 qla1280_print_scsi_cmd(1, cp);
4010 }
4011}
4012#endif
4013
4014
4015enum tokens {
4016 TOKEN_NVRAM,
4017 TOKEN_SYNC,
4018 TOKEN_WIDE,
4019 TOKEN_PPR,
4020 TOKEN_VERBOSE,
4021 TOKEN_DEBUG,
4022};
4023
4024struct setup_tokens {
4025 char *token;
4026 int val;
4027};
4028
4029static struct setup_tokens setup_token[] __initdata =
4030{
4031 { "nvram", TOKEN_NVRAM },
4032 { "sync", TOKEN_SYNC },
4033 { "wide", TOKEN_WIDE },
4034 { "ppr", TOKEN_PPR },
4035 { "verbose", TOKEN_VERBOSE },
4036 { "debug", TOKEN_DEBUG },
4037};
4038
4039
4040/**************************************************************************
4041 * qla1280_setup
4042 *
4043 * Handle boot parameters. This really needs to be changed so one
4044 * can specify per adapter parameters.
4045 **************************************************************************/
4046static int __init
4047qla1280_setup(char *s)
4048{
4049 char *cp, *ptr;
4050 unsigned long val;
4051 int toke;
4052
4053 cp = s;
4054
4055 while (cp && (ptr = strchr(cp, ':'))) {
4056 ptr++;
4057 if (!strcmp(ptr, "yes")) {
4058 val = 0x10000;
4059 ptr += 3;
4060 } else if (!strcmp(ptr, "no")) {
4061 val = 0;
4062 ptr += 2;
4063 } else
4064 val = simple_strtoul(ptr, &ptr, 0);
4065
4066 switch ((toke = qla1280_get_token(cp))) {
4067 case TOKEN_NVRAM:
4068 if (!val)
4069 driver_setup.no_nvram = 1;
4070 break;
4071 case TOKEN_SYNC:
4072 if (!val)
4073 driver_setup.no_sync = 1;
4074 else if (val != 0x10000)
4075 driver_setup.sync_mask = val;
4076 break;
4077 case TOKEN_WIDE:
4078 if (!val)
4079 driver_setup.no_wide = 1;
4080 else if (val != 0x10000)
4081 driver_setup.wide_mask = val;
4082 break;
4083 case TOKEN_PPR:
4084 if (!val)
4085 driver_setup.no_ppr = 1;
4086 else if (val != 0x10000)
4087 driver_setup.ppr_mask = val;
4088 break;
4089 case TOKEN_VERBOSE:
4090 qla1280_verbose = val;
4091 break;
4092 default:
4093 printk(KERN_INFO "qla1280: unknown boot option %s\n",
4094 cp);
4095 }
4096
4097 cp = strchr(ptr, ';');
4098 if (cp)
4099 cp++;
4100 else {
4101 break;
4102 }
4103 }
4104 return 1;
4105}
4106
4107
4108static int __init
4109qla1280_get_token(char *str)
4110{
4111 char *sep;
4112 long ret = -1;
4113 int i;
4114
4115 sep = strchr(str, ':');
4116
4117 if (sep) {
4118 for (i = 0; i < ARRAY_SIZE(setup_token); i++) {
4119 if (!strncmp(setup_token[i].token, str, (sep - str))) {
4120 ret = setup_token[i].val;
4121 break;
4122 }
4123 }
4124 }
4125
4126 return ret;
4127}
4128
4129
4130static struct scsi_host_template qla1280_driver_template = {
4131 .module = THIS_MODULE,
4132 .proc_name = "qla1280",
4133 .name = "Qlogic ISP 1280/12160",
4134 .info = qla1280_info,
4135 .slave_configure = qla1280_slave_configure,
4136 .queuecommand = qla1280_queuecommand,
4137 .eh_abort_handler = qla1280_eh_abort,
4138 .eh_device_reset_handler= qla1280_eh_device_reset,
4139 .eh_bus_reset_handler = qla1280_eh_bus_reset,
4140 .eh_host_reset_handler = qla1280_eh_adapter_reset,
4141 .bios_param = qla1280_biosparam,
4142 .can_queue = MAX_OUTSTANDING_COMMANDS,
4143 .this_id = -1,
4144 .sg_tablesize = SG_ALL,
4145};
4146
4147
4148static int
4149qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
4150{
4151 int devnum = id->driver_data;
4152 struct qla_boards *bdp = &ql1280_board_tbl[devnum];
4153 struct Scsi_Host *host;
4154 struct scsi_qla_host *ha;
4155 int error = -ENODEV;
4156
4157 /* Bypass all AMI SUBSYS VENDOR IDs */
4158 if (pdev->subsystem_vendor == PCI_VENDOR_ID_AMI) {
4159 printk(KERN_INFO
4160 "qla1280: Skipping AMI SubSys Vendor ID Chip\n");
4161 goto error;
4162 }
4163
4164 printk(KERN_INFO "qla1280: %s found on PCI bus %i, dev %i\n",
4165 bdp->name, pdev->bus->number, PCI_SLOT(pdev->devfn));
4166
4167 if (pci_enable_device(pdev)) {
4168 printk(KERN_WARNING
4169 "qla1280: Failed to enabled pci device, aborting.\n");
4170 goto error;
4171 }
4172
4173 pci_set_master(pdev);
4174
4175 error = -ENOMEM;
4176 host = scsi_host_alloc(&qla1280_driver_template, sizeof(*ha));
4177 if (!host) {
4178 printk(KERN_WARNING
4179 "qla1280: Failed to register host, aborting.\n");
4180 goto error_disable_device;
4181 }
4182
4183 ha = (struct scsi_qla_host *)host->hostdata;
4184 memset(ha, 0, sizeof(struct scsi_qla_host));
4185
4186 ha->pdev = pdev;
4187 ha->devnum = devnum; /* specifies microcode load address */
4188
4189#ifdef QLA_64BIT_PTR
4190 if (dma_set_mask_and_coherent(&ha->pdev->dev, DMA_BIT_MASK(64))) {
4191 if (dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(32))) {
4192 printk(KERN_WARNING "scsi(%li): Unable to set a "
4193 "suitable DMA mask - aborting\n", ha->host_no);
4194 error = -ENODEV;
4195 goto error_put_host;
4196 }
4197 } else
4198 dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n",
4199 ha->host_no);
4200#else
4201 if (dma_set_mask(&ha->pdev->dev, DMA_BIT_MASK(32))) {
4202 printk(KERN_WARNING "scsi(%li): Unable to set a "
4203 "suitable DMA mask - aborting\n", ha->host_no);
4204 error = -ENODEV;
4205 goto error_put_host;
4206 }
4207#endif
4208
4209 ha->request_ring = dma_alloc_coherent(&ha->pdev->dev,
4210 ((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)),
4211 &ha->request_dma, GFP_KERNEL);
4212 if (!ha->request_ring) {
4213 printk(KERN_INFO "qla1280: Failed to get request memory\n");
4214 goto error_put_host;
4215 }
4216
4217 ha->response_ring = dma_alloc_coherent(&ha->pdev->dev,
4218 ((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)),
4219 &ha->response_dma, GFP_KERNEL);
4220 if (!ha->response_ring) {
4221 printk(KERN_INFO "qla1280: Failed to get response memory\n");
4222 goto error_free_request_ring;
4223 }
4224
4225 ha->ports = bdp->numPorts;
4226
4227 ha->host = host;
4228 ha->host_no = host->host_no;
4229
4230 host->irq = pdev->irq;
4231 host->max_channel = bdp->numPorts - 1;
4232 host->max_lun = MAX_LUNS - 1;
4233 host->max_id = MAX_TARGETS;
4234 host->max_sectors = 1024;
4235 host->unique_id = host->host_no;
4236
4237 error = -ENODEV;
4238
4239#if MEMORY_MAPPED_IO
4240 ha->mmpbase = pci_ioremap_bar(ha->pdev, 1);
4241 if (!ha->mmpbase) {
4242 printk(KERN_INFO "qla1280: Unable to map I/O memory\n");
4243 goto error_free_response_ring;
4244 }
4245
4246 host->base = (unsigned long)ha->mmpbase;
4247 ha->iobase = (struct device_reg __iomem *)ha->mmpbase;
4248#else
4249 host->io_port = pci_resource_start(ha->pdev, 0);
4250 if (!request_region(host->io_port, 0xff, "qla1280")) {
4251 printk(KERN_INFO "qla1280: Failed to reserve i/o region "
4252 "0x%04lx-0x%04lx - already in use\n",
4253 host->io_port, host->io_port + 0xff);
4254 goto error_free_response_ring;
4255 }
4256
4257 ha->iobase = (struct device_reg *)host->io_port;
4258#endif
4259
4260 INIT_LIST_HEAD(&ha->done_q);
4261
4262 /* Disable ISP interrupts. */
4263 qla1280_disable_intrs(ha);
4264
4265 if (request_irq(pdev->irq, qla1280_intr_handler, IRQF_SHARED,
4266 "qla1280", ha)) {
4267 printk("qla1280 : Failed to reserve interrupt %d already "
4268 "in use\n", pdev->irq);
4269 goto error_release_region;
4270 }
4271
4272 /* load the F/W, read paramaters, and init the H/W */
4273 if (qla1280_initialize_adapter(ha)) {
4274 printk(KERN_INFO "qla1x160: Failed to initialize adapter\n");
4275 goto error_free_irq;
4276 }
4277
4278 /* set our host ID (need to do something about our two IDs) */
4279 host->this_id = ha->bus_settings[0].id;
4280
4281 pci_set_drvdata(pdev, host);
4282
4283 error = scsi_add_host(host, &pdev->dev);
4284 if (error)
4285 goto error_disable_adapter;
4286 scsi_scan_host(host);
4287
4288 return 0;
4289
4290 error_disable_adapter:
4291 qla1280_disable_intrs(ha);
4292 error_free_irq:
4293 free_irq(pdev->irq, ha);
4294 error_release_region:
4295#if MEMORY_MAPPED_IO
4296 iounmap(ha->mmpbase);
4297#else
4298 release_region(host->io_port, 0xff);
4299#endif
4300 error_free_response_ring:
4301 dma_free_coherent(&ha->pdev->dev,
4302 ((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)),
4303 ha->response_ring, ha->response_dma);
4304 error_free_request_ring:
4305 dma_free_coherent(&ha->pdev->dev,
4306 ((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)),
4307 ha->request_ring, ha->request_dma);
4308 error_put_host:
4309 scsi_host_put(host);
4310 error_disable_device:
4311 pci_disable_device(pdev);
4312 error:
4313 return error;
4314}
4315
4316
4317static void
4318qla1280_remove_one(struct pci_dev *pdev)
4319{
4320 struct Scsi_Host *host = pci_get_drvdata(pdev);
4321 struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
4322
4323 scsi_remove_host(host);
4324
4325 qla1280_disable_intrs(ha);
4326
4327 free_irq(pdev->irq, ha);
4328
4329#if MEMORY_MAPPED_IO
4330 iounmap(ha->mmpbase);
4331#else
4332 release_region(host->io_port, 0xff);
4333#endif
4334
4335 dma_free_coherent(&ha->pdev->dev,
4336 ((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))),
4337 ha->request_ring, ha->request_dma);
4338 dma_free_coherent(&ha->pdev->dev,
4339 ((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))),
4340 ha->response_ring, ha->response_dma);
4341
4342 pci_disable_device(pdev);
4343
4344 scsi_host_put(host);
4345}
4346
4347static struct pci_driver qla1280_pci_driver = {
4348 .name = "qla1280",
4349 .id_table = qla1280_pci_tbl,
4350 .probe = qla1280_probe_one,
4351 .remove = qla1280_remove_one,
4352};
4353
4354static int __init
4355qla1280_init(void)
4356{
4357 if (sizeof(struct srb) > sizeof(struct scsi_pointer)) {
4358 printk(KERN_WARNING
4359 "qla1280: struct srb too big, aborting\n");
4360 return -EINVAL;
4361 }
4362
4363#ifdef MODULE
4364 /*
4365 * If we are called as a module, the qla1280 pointer may not be null
4366 * and it would point to our bootup string, just like on the lilo
4367 * command line. IF not NULL, then process this config string with
4368 * qla1280_setup
4369 *
4370 * Boot time Options
4371 * To add options at boot time add a line to your lilo.conf file like:
4372 * append="qla1280=verbose,max_tags:{{255,255,255,255},{255,255,255,255}}"
4373 * which will result in the first four devices on the first two
4374 * controllers being set to a tagged queue depth of 32.
4375 */
4376 if (qla1280)
4377 qla1280_setup(qla1280);
4378#endif
4379
4380 return pci_register_driver(&qla1280_pci_driver);
4381}
4382
4383static void __exit
4384qla1280_exit(void)
4385{
4386 int i;
4387
4388 pci_unregister_driver(&qla1280_pci_driver);
4389 /* release any allocated firmware images */
4390 for (i = 0; i < QL_NUM_FW_IMAGES; i++) {
4391 release_firmware(qla1280_fw_tbl[i].fw);
4392 qla1280_fw_tbl[i].fw = NULL;
4393 }
4394}
4395
4396module_init(qla1280_init);
4397module_exit(qla1280_exit);
4398
4399MODULE_AUTHOR("Qlogic & Jes Sorensen");
4400MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver");
4401MODULE_LICENSE("GPL");
4402MODULE_FIRMWARE("qlogic/1040.bin");
4403MODULE_FIRMWARE("qlogic/1280.bin");
4404MODULE_FIRMWARE("qlogic/12160.bin");
4405MODULE_VERSION(QLA1280_VERSION);
4406
4407/*
4408 * Overrides for Emacs so that we almost follow Linus's tabbing style.
4409 * Emacs will notice this stuff at the end of the file and automatically
4410 * adjust the settings for this buffer only. This must remain at the end
4411 * of the file.
4412 * ---------------------------------------------------------------------------
4413 * Local variables:
4414 * c-basic-offset: 8
4415 * tab-width: 8
4416 * End:
4417 */