Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/**************************************************************************
3 * Initio 9100 device driver for Linux.
4 *
5 * Copyright (c) 1994-1998 Initio Corporation
6 * Copyright (c) 1998 Bas Vermeulen <bvermeul@blackstar.xs4all.nl>
7 * Copyright (c) 2004 Christoph Hellwig <hch@lst.de>
8 * Copyright (c) 2007 Red Hat
9 *
10 *************************************************************************
11 *
12 * DESCRIPTION:
13 *
14 * This is the Linux low-level SCSI driver for Initio INI-9X00U/UW SCSI host
15 * adapters
16 *
17 * 08/06/97 hc - v1.01h
18 * - Support inic-940 and inic-935
19 * 09/26/97 hc - v1.01i
20 * - Make correction from J.W. Schultz suggestion
21 * 10/13/97 hc - Support reset function
22 * 10/21/97 hc - v1.01j
23 * - Support 32 LUN (SCSI 3)
24 * 01/14/98 hc - v1.01k
25 * - Fix memory allocation problem
26 * 03/04/98 hc - v1.01l
27 * - Fix tape rewind which will hang the system problem
28 * - Set can_queue to initio_num_scb
29 * 06/25/98 hc - v1.01m
30 * - Get it work for kernel version >= 2.1.75
31 * - Dynamic assign SCSI bus reset holding time in initio_init()
32 * 07/02/98 hc - v1.01n
33 * - Support 0002134A
34 * 08/07/98 hc - v1.01o
35 * - Change the initio_abort_srb routine to use scsi_done. <01>
36 * 09/07/98 hl - v1.02
37 * - Change the INI9100U define and proc_dir_entry to
38 * reflect the newer Kernel 2.1.118, but the v1.o1o
39 * should work with Kernel 2.1.118.
40 * 09/20/98 wh - v1.02a
41 * - Support Abort command.
42 * - Handle reset routine.
43 * 09/21/98 hl - v1.03
44 * - remove comments.
45 * 12/09/98 bv - v1.03a
46 * - Removed unused code
47 * 12/13/98 bv - v1.03b
48 * - Remove cli() locking for kernels >= 2.1.95. This uses
49 * spinlocks to serialize access to the pSRB_head and
50 * pSRB_tail members of the HCS structure.
51 * 09/01/99 bv - v1.03d
52 * - Fixed a deadlock problem in SMP.
53 * 21/01/99 bv - v1.03e
54 * - Add support for the Domex 3192U PCI SCSI
55 * This is a slightly modified patch by
56 * Brian Macy <bmacy@sunshinecomputing.com>
57 * 22/02/99 bv - v1.03f
58 * - Didn't detect the INIC-950 in 2.0.x correctly.
59 * Now fixed.
60 * 05/07/99 bv - v1.03g
61 * - Changed the assumption that HZ = 100
62 * 10/17/03 mc - v1.04
63 * - added new DMA API support
64 * 06/01/04 jmd - v1.04a
65 * - Re-add reset_bus support
66 **************************************************************************/
67
68#include <linux/module.h>
69#include <linux/errno.h>
70#include <linux/delay.h>
71#include <linux/pci.h>
72#include <linux/init.h>
73#include <linux/blkdev.h>
74#include <linux/spinlock.h>
75#include <linux/stat.h>
76#include <linux/kernel.h>
77#include <linux/proc_fs.h>
78#include <linux/string.h>
79#include <linux/interrupt.h>
80#include <linux/ioport.h>
81#include <linux/slab.h>
82#include <linux/jiffies.h>
83#include <linux/dma-mapping.h>
84#include <asm/io.h>
85
86#include <scsi/scsi.h>
87#include <scsi/scsi_cmnd.h>
88#include <scsi/scsi_device.h>
89#include <scsi/scsi_host.h>
90#include <scsi/scsi_tcq.h>
91
92#include "initio.h"
93
94#define SENSE_SIZE 14
95
96#define i91u_MAXQUEUE 2
97#define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.04a"
98
99#ifdef DEBUG_i91u
100static unsigned int i91u_debug = DEBUG_DEFAULT;
101#endif
102
103static int initio_tag_enable = 1;
104
105#ifdef DEBUG_i91u
106static int setup_debug = 0;
107#endif
108
109static void i91uSCBPost(u8 * pHcb, u8 * pScb);
110
111#define DEBUG_INTERRUPT 0
112#define DEBUG_QUEUE 0
113#define DEBUG_STATE 0
114#define INT_DISC 0
115
116/*--- forward references ---*/
117static struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun);
118static struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host);
119
120static int tulip_main(struct initio_host * host);
121
122static int initio_next_state(struct initio_host * host);
123static int initio_state_1(struct initio_host * host);
124static int initio_state_2(struct initio_host * host);
125static int initio_state_3(struct initio_host * host);
126static int initio_state_4(struct initio_host * host);
127static int initio_state_5(struct initio_host * host);
128static int initio_state_6(struct initio_host * host);
129static int initio_state_7(struct initio_host * host);
130static int initio_xfer_data_in(struct initio_host * host);
131static int initio_xfer_data_out(struct initio_host * host);
132static int initio_xpad_in(struct initio_host * host);
133static int initio_xpad_out(struct initio_host * host);
134static int initio_status_msg(struct initio_host * host);
135
136static int initio_msgin(struct initio_host * host);
137static int initio_msgin_sync(struct initio_host * host);
138static int initio_msgin_accept(struct initio_host * host);
139static int initio_msgout_reject(struct initio_host * host);
140static int initio_msgin_extend(struct initio_host * host);
141
142static int initio_msgout_ide(struct initio_host * host);
143static int initio_msgout_abort_targ(struct initio_host * host);
144static int initio_msgout_abort_tag(struct initio_host * host);
145
146static int initio_bus_device_reset(struct initio_host * host);
147static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb);
148static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb);
149static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb);
150static int int_initio_busfree(struct initio_host * host);
151static int int_initio_scsi_rst(struct initio_host * host);
152static int int_initio_bad_seq(struct initio_host * host);
153static int int_initio_resel(struct initio_host * host);
154static int initio_sync_done(struct initio_host * host);
155static int wdtr_done(struct initio_host * host);
156static int wait_tulip(struct initio_host * host);
157static int initio_wait_done_disc(struct initio_host * host);
158static int initio_wait_disc(struct initio_host * host);
159static void tulip_scsi(struct initio_host * host);
160static int initio_post_scsi_rst(struct initio_host * host);
161
162static void initio_se2_ew_en(unsigned long base);
163static void initio_se2_ew_ds(unsigned long base);
164static int initio_se2_rd_all(unsigned long base);
165static void initio_se2_update_all(unsigned long base); /* setup default pattern */
166static void initio_read_eeprom(unsigned long base);
167
168/* ---- INTERNAL VARIABLES ---- */
169
170static NVRAM i91unvram;
171static NVRAM *i91unvramp;
172
173static u8 i91udftNvRam[64] =
174{
175 /*----------- header -----------*/
176 0x25, 0xc9, /* Signature */
177 0x40, /* Size */
178 0x01, /* Revision */
179 /* -- Host Adapter Structure -- */
180 0x95, /* ModelByte0 */
181 0x00, /* ModelByte1 */
182 0x00, /* ModelInfo */
183 0x01, /* NumOfCh */
184 NBC1_DEFAULT, /* BIOSConfig1 */
185 0, /* BIOSConfig2 */
186 0, /* HAConfig1 */
187 0, /* HAConfig2 */
188 /* SCSI channel 0 and target Structure */
189 7, /* SCSIid */
190 NCC1_DEFAULT, /* SCSIconfig1 */
191 0, /* SCSIconfig2 */
192 0x10, /* NumSCSItarget */
193
194 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
195 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
196 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
197 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
198
199 /* SCSI channel 1 and target Structure */
200 7, /* SCSIid */
201 NCC1_DEFAULT, /* SCSIconfig1 */
202 0, /* SCSIconfig2 */
203 0x10, /* NumSCSItarget */
204
205 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
206 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
207 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
208 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
209 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
210 0, 0}; /* - CheckSum - */
211
212
213static u8 initio_rate_tbl[8] = /* fast 20 */
214{
215 /* nanosecond divide by 4 */
216 12, /* 50ns, 20M */
217 18, /* 75ns, 13.3M */
218 25, /* 100ns, 10M */
219 31, /* 125ns, 8M */
220 37, /* 150ns, 6.6M */
221 43, /* 175ns, 5.7M */
222 50, /* 200ns, 5M */
223 62 /* 250ns, 4M */
224};
225
226static void initio_do_pause(unsigned amount)
227{
228 /* Pause for amount jiffies */
229 unsigned long the_time = jiffies + amount;
230
231 while (time_before_eq(jiffies, the_time))
232 cpu_relax();
233}
234
235/*-- forward reference --*/
236
237/******************************************************************
238 Input: instruction for Serial E2PROM
239
240 EX: se2_rd(0 call se2_instr() to send address and read command
241
242 StartBit OP_Code Address Data
243 --------- -------- ------------------ -------
244 1 1 , 0 A5,A4,A3,A2,A1,A0 D15-D0
245
246 +-----------------------------------------------------
247 |
248 CS -----+
249 +--+ +--+ +--+ +--+ +--+
250 ^ | ^ | ^ | ^ | ^ |
251 | | | | | | | | | |
252 CLK -------+ +--+ +--+ +--+ +--+ +--
253 (leading edge trigger)
254
255 +--1-----1--+
256 | SB OP | OP A5 A4
257 DI ----+ +--0------------------
258 (address and cmd sent to nvram)
259
260 -------------------------------------------+
261 |
262 DO +---
263 (data sent from nvram)
264
265
266******************************************************************/
267
268/**
269 * initio_se2_instr - bitbang an instruction
270 * @base: Base of InitIO controller
271 * @instr: Instruction for serial E2PROM
272 *
273 * Bitbang an instruction out to the serial E2Prom
274 */
275
276static void initio_se2_instr(unsigned long base, u8 instr)
277{
278 int i;
279 u8 b;
280
281 outb(SE2CS | SE2DO, base + TUL_NVRAM); /* cs+start bit */
282 udelay(30);
283 outb(SE2CS | SE2CLK | SE2DO, base + TUL_NVRAM); /* +CLK */
284 udelay(30);
285
286 for (i = 0; i < 8; i++) {
287 if (instr & 0x80)
288 b = SE2CS | SE2DO; /* -CLK+dataBit */
289 else
290 b = SE2CS; /* -CLK */
291 outb(b, base + TUL_NVRAM);
292 udelay(30);
293 outb(b | SE2CLK, base + TUL_NVRAM); /* +CLK */
294 udelay(30);
295 instr <<= 1;
296 }
297 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
298 udelay(30);
299}
300
301
302/**
303 * initio_se2_ew_en - Enable erase/write
304 * @base: Base address of InitIO controller
305 *
306 * Enable erase/write state of serial EEPROM
307 */
308void initio_se2_ew_en(unsigned long base)
309{
310 initio_se2_instr(base, 0x30); /* EWEN */
311 outb(0, base + TUL_NVRAM); /* -CS */
312 udelay(30);
313}
314
315
316/**
317 * initio_se2_ew_ds - Disable erase/write
318 * @base: Base address of InitIO controller
319 *
320 * Disable erase/write state of serial EEPROM
321 */
322void initio_se2_ew_ds(unsigned long base)
323{
324 initio_se2_instr(base, 0); /* EWDS */
325 outb(0, base + TUL_NVRAM); /* -CS */
326 udelay(30);
327}
328
329
330/**
331 * initio_se2_rd - read E2PROM word
332 * @base: Base of InitIO controller
333 * @addr: Address of word in E2PROM
334 *
335 * Read a word from the NV E2PROM device
336 */
337static u16 initio_se2_rd(unsigned long base, u8 addr)
338{
339 u8 instr, rb;
340 u16 val = 0;
341 int i;
342
343 instr = (u8) (addr | 0x80);
344 initio_se2_instr(base, instr); /* READ INSTR */
345
346 for (i = 15; i >= 0; i--) {
347 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */
348 udelay(30);
349 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
350
351 /* sample data after the following edge of clock */
352 rb = inb(base + TUL_NVRAM);
353 rb &= SE2DI;
354 val += (rb << i);
355 udelay(30); /* 6/20/95 */
356 }
357
358 outb(0, base + TUL_NVRAM); /* no chip select */
359 udelay(30);
360 return val;
361}
362
363/**
364 * initio_se2_wr - read E2PROM word
365 * @base: Base of InitIO controller
366 * @addr: Address of word in E2PROM
367 * @val: Value to write
368 *
369 * Write a word to the NV E2PROM device. Used when recovering from
370 * a problem with the NV.
371 */
372static void initio_se2_wr(unsigned long base, u8 addr, u16 val)
373{
374 u8 instr;
375 int i;
376
377 instr = (u8) (addr | 0x40);
378 initio_se2_instr(base, instr); /* WRITE INSTR */
379 for (i = 15; i >= 0; i--) {
380 if (val & 0x8000)
381 outb(SE2CS | SE2DO, base + TUL_NVRAM); /* -CLK+dataBit 1 */
382 else
383 outb(SE2CS, base + TUL_NVRAM); /* -CLK+dataBit 0 */
384 udelay(30);
385 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */
386 udelay(30);
387 val <<= 1;
388 }
389 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
390 udelay(30);
391 outb(0, base + TUL_NVRAM); /* -CS */
392 udelay(30);
393
394 outb(SE2CS, base + TUL_NVRAM); /* +CS */
395 udelay(30);
396
397 for (;;) {
398 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */
399 udelay(30);
400 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
401 udelay(30);
402 if (inb(base + TUL_NVRAM) & SE2DI)
403 break; /* write complete */
404 }
405 outb(0, base + TUL_NVRAM); /* -CS */
406}
407
408/**
409 * initio_se2_rd_all - read hostadapter NV configuration
410 * @base: Base address of InitIO controller
411 *
412 * Reads the E2PROM data into main memory. Ensures that the checksum
413 * and header marker are valid. Returns 1 on success -1 on error.
414 */
415
416static int initio_se2_rd_all(unsigned long base)
417{
418 int i;
419 u16 chksum = 0;
420 u16 *np;
421
422 i91unvramp = &i91unvram;
423 np = (u16 *) i91unvramp;
424 for (i = 0; i < 32; i++)
425 *np++ = initio_se2_rd(base, i);
426
427 /* Is signature "ini" ok ? */
428 if (i91unvramp->NVM_Signature != INI_SIGNATURE)
429 return -1;
430 /* Is ckecksum ok ? */
431 np = (u16 *) i91unvramp;
432 for (i = 0; i < 31; i++)
433 chksum += *np++;
434 if (i91unvramp->NVM_CheckSum != chksum)
435 return -1;
436 return 1;
437}
438
439/**
440 * initio_se2_update_all - Update E2PROM
441 * @base: Base of InitIO controller
442 *
443 * Update the E2PROM by wrting any changes into the E2PROM
444 * chip, rewriting the checksum.
445 */
446static void initio_se2_update_all(unsigned long base)
447{ /* setup default pattern */
448 int i;
449 u16 chksum = 0;
450 u16 *np, *np1;
451
452 i91unvramp = &i91unvram;
453 /* Calculate checksum first */
454 np = (u16 *) i91udftNvRam;
455 for (i = 0; i < 31; i++)
456 chksum += *np++;
457 *np = chksum;
458 initio_se2_ew_en(base); /* Enable write */
459
460 np = (u16 *) i91udftNvRam;
461 np1 = (u16 *) i91unvramp;
462 for (i = 0; i < 32; i++, np++, np1++) {
463 if (*np != *np1)
464 initio_se2_wr(base, i, *np);
465 }
466 initio_se2_ew_ds(base); /* Disable write */
467}
468
469/**
470 * initio_read_eeprom - Retrieve configuration
471 * @base: Base of InitIO Host Adapter
472 *
473 * Retrieve the host adapter configuration data from E2Prom. If the
474 * data is invalid then the defaults are used and are also restored
475 * into the E2PROM. This forms the access point for the SCSI driver
476 * into the E2PROM layer, the other functions for the E2PROM are all
477 * internal use.
478 *
479 * Must be called single threaded, uses a shared global area.
480 */
481
482static void initio_read_eeprom(unsigned long base)
483{
484 u8 gctrl;
485
486 i91unvramp = &i91unvram;
487 /* Enable EEProm programming */
488 gctrl = inb(base + TUL_GCTRL);
489 outb(gctrl | TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL);
490 if (initio_se2_rd_all(base) != 1) {
491 initio_se2_update_all(base); /* setup default pattern */
492 initio_se2_rd_all(base); /* load again */
493 }
494 /* Disable EEProm programming */
495 gctrl = inb(base + TUL_GCTRL);
496 outb(gctrl & ~TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL);
497}
498
499/**
500 * initio_stop_bm - stop bus master
501 * @host: InitIO we are stopping
502 *
503 * Stop any pending DMA operation, aborting the DMA if necessary
504 */
505
506static void initio_stop_bm(struct initio_host * host)
507{
508
509 if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */
510 outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd);
511 /* wait Abort DMA xfer done */
512 while ((inb(host->addr + TUL_Int) & XABT) == 0)
513 cpu_relax();
514 }
515 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
516}
517
518/**
519 * initio_reset_scsi - Reset SCSI host controller
520 * @host: InitIO host to reset
521 * @seconds: Recovery time
522 *
523 * Perform a full reset of the SCSI subsystem.
524 */
525
526static int initio_reset_scsi(struct initio_host * host, int seconds)
527{
528 outb(TSC_RST_BUS, host->addr + TUL_SCtrl0);
529
530 while (!((host->jsint = inb(host->addr + TUL_SInt)) & TSS_SCSIRST_INT))
531 cpu_relax();
532
533 /* reset tulip chip */
534 outb(0, host->addr + TUL_SSignal);
535
536 /* Stall for a while, wait for target's firmware ready,make it 2 sec ! */
537 /* SONY 5200 tape drive won't work if only stall for 1 sec */
538 /* FIXME: this is a very long busy wait right now */
539 initio_do_pause(seconds * HZ);
540
541 inb(host->addr + TUL_SInt);
542 return SCSI_RESET_SUCCESS;
543}
544
545/**
546 * initio_init - set up an InitIO host adapter
547 * @host: InitIO host adapter
548 * @bios_addr: BIOS address
549 *
550 * Set up the host adapter and devices according to the configuration
551 * retrieved from the E2PROM.
552 *
553 * Locking: Calls E2PROM layer code which is not re-enterable so must
554 * run single threaded for now.
555 */
556
557static void initio_init(struct initio_host * host, u8 *bios_addr)
558{
559 int i;
560 u8 *flags;
561 u8 *heads;
562
563 /* Get E2Prom configuration */
564 initio_read_eeprom(host->addr);
565 if (i91unvramp->NVM_SCSIInfo[0].NVM_NumOfTarg == 8)
566 host->max_tar = 8;
567 else
568 host->max_tar = 16;
569
570 host->config = i91unvramp->NVM_SCSIInfo[0].NVM_ChConfig1;
571
572 host->scsi_id = i91unvramp->NVM_SCSIInfo[0].NVM_ChSCSIID;
573 host->idmask = ~(1 << host->scsi_id);
574
575#ifdef CHK_PARITY
576 /* Enable parity error response */
577 outb(inb(host->addr + TUL_PCMD) | 0x40, host->addr + TUL_PCMD);
578#endif
579
580 /* Mask all the interrupt */
581 outb(0x1F, host->addr + TUL_Mask);
582
583 initio_stop_bm(host);
584 /* --- Initialize the tulip --- */
585 outb(TSC_RST_CHIP, host->addr + TUL_SCtrl0);
586
587 /* program HBA's SCSI ID */
588 outb(host->scsi_id << 4, host->addr + TUL_SScsiId);
589
590 /* Enable Initiator Mode ,phase latch,alternate sync period mode,
591 disable SCSI reset */
592 if (host->config & HCC_EN_PAR)
593 host->sconf1 = (TSC_INITDEFAULT | TSC_EN_SCSI_PAR);
594 else
595 host->sconf1 = (TSC_INITDEFAULT);
596 outb(host->sconf1, host->addr + TUL_SConfig);
597
598 /* Enable HW reselect */
599 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1);
600
601 outb(0, host->addr + TUL_SPeriod);
602
603 /* selection time out = 250 ms */
604 outb(153, host->addr + TUL_STimeOut);
605
606 /* Enable SCSI terminator */
607 outb((host->config & (HCC_ACT_TERM1 | HCC_ACT_TERM2)),
608 host->addr + TUL_XCtrl);
609 outb(((host->config & HCC_AUTO_TERM) >> 4) |
610 (inb(host->addr + TUL_GCTRL1) & 0xFE),
611 host->addr + TUL_GCTRL1);
612
613 for (i = 0,
614 flags = & (i91unvramp->NVM_SCSIInfo[0].NVM_Targ0Config),
615 heads = bios_addr + 0x180;
616 i < host->max_tar;
617 i++, flags++) {
618 host->targets[i].flags = *flags & ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
619 if (host->targets[i].flags & TCF_EN_255)
620 host->targets[i].drv_flags = TCF_DRV_255_63;
621 else
622 host->targets[i].drv_flags = 0;
623 host->targets[i].js_period = 0;
624 host->targets[i].sconfig0 = host->sconf1;
625 host->targets[i].heads = *heads++;
626 if (host->targets[i].heads == 255)
627 host->targets[i].drv_flags = TCF_DRV_255_63;
628 else
629 host->targets[i].drv_flags = 0;
630 host->targets[i].sectors = *heads++;
631 host->targets[i].flags &= ~TCF_BUSY;
632 host->act_tags[i] = 0;
633 host->max_tags[i] = 0xFF;
634 } /* for */
635 printk("i91u: PCI Base=0x%04X, IRQ=%d, BIOS=0x%04X0, SCSI ID=%d\n",
636 host->addr, host->pci_dev->irq,
637 host->bios_addr, host->scsi_id);
638 /* Reset SCSI Bus */
639 if (host->config & HCC_SCSI_RESET) {
640 printk(KERN_INFO "i91u: Reset SCSI Bus ... \n");
641 initio_reset_scsi(host, 10);
642 }
643 outb(0x17, host->addr + TUL_SCFG1);
644 outb(0xE9, host->addr + TUL_SIntEnable);
645}
646
647/**
648 * initio_alloc_scb - Allocate an SCB
649 * @host: InitIO host we are allocating for
650 *
651 * Walk the SCB list for the controller and allocate a free SCB if
652 * one exists.
653 */
654static struct scsi_ctrl_blk *initio_alloc_scb(struct initio_host *host)
655{
656 struct scsi_ctrl_blk *scb;
657 unsigned long flags;
658
659 spin_lock_irqsave(&host->avail_lock, flags);
660 if ((scb = host->first_avail) != NULL) {
661#if DEBUG_QUEUE
662 printk("find scb at %p\n", scb);
663#endif
664 if ((host->first_avail = scb->next) == NULL)
665 host->last_avail = NULL;
666 scb->next = NULL;
667 scb->status = SCB_RENT;
668 }
669 spin_unlock_irqrestore(&host->avail_lock, flags);
670 return scb;
671}
672
673/**
674 * initio_release_scb - Release an SCB
675 * @host: InitIO host that owns the SCB
676 * @cmnd: SCB command block being returned
677 *
678 * Return an allocated SCB to the host free list
679 */
680
681static void initio_release_scb(struct initio_host * host, struct scsi_ctrl_blk * cmnd)
682{
683 unsigned long flags;
684
685#if DEBUG_QUEUE
686 printk("Release SCB %p; ", cmnd);
687#endif
688 spin_lock_irqsave(&(host->avail_lock), flags);
689 cmnd->srb = NULL;
690 cmnd->status = 0;
691 cmnd->next = NULL;
692 if (host->last_avail != NULL) {
693 host->last_avail->next = cmnd;
694 host->last_avail = cmnd;
695 } else {
696 host->first_avail = cmnd;
697 host->last_avail = cmnd;
698 }
699 spin_unlock_irqrestore(&(host->avail_lock), flags);
700}
701
702/***************************************************************************/
703static void initio_append_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
704{
705
706#if DEBUG_QUEUE
707 printk("Append pend SCB %p; ", scbp);
708#endif
709 scbp->status = SCB_PEND;
710 scbp->next = NULL;
711 if (host->last_pending != NULL) {
712 host->last_pending->next = scbp;
713 host->last_pending = scbp;
714 } else {
715 host->first_pending = scbp;
716 host->last_pending = scbp;
717 }
718}
719
720/***************************************************************************/
721static void initio_push_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
722{
723
724#if DEBUG_QUEUE
725 printk("Push pend SCB %p; ", scbp);
726#endif
727 scbp->status = SCB_PEND;
728 if ((scbp->next = host->first_pending) != NULL) {
729 host->first_pending = scbp;
730 } else {
731 host->first_pending = scbp;
732 host->last_pending = scbp;
733 }
734}
735
736static struct scsi_ctrl_blk *initio_find_first_pend_scb(struct initio_host * host)
737{
738 struct scsi_ctrl_blk *first;
739
740
741 first = host->first_pending;
742 while (first != NULL) {
743 if (first->opcode != ExecSCSI)
744 return first;
745 if (first->tagmsg == 0) {
746 if ((host->act_tags[first->target] == 0) &&
747 !(host->targets[first->target].flags & TCF_BUSY))
748 return first;
749 } else {
750 if ((host->act_tags[first->target] >=
751 host->max_tags[first->target]) |
752 (host->targets[first->target].flags & TCF_BUSY)) {
753 first = first->next;
754 continue;
755 }
756 return first;
757 }
758 first = first->next;
759 }
760 return first;
761}
762
763static void initio_unlink_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scb)
764{
765 struct scsi_ctrl_blk *tmp, *prev;
766
767#if DEBUG_QUEUE
768 printk("unlink pend SCB %p; ", scb);
769#endif
770
771 prev = tmp = host->first_pending;
772 while (tmp != NULL) {
773 if (scb == tmp) { /* Unlink this SCB */
774 if (tmp == host->first_pending) {
775 if ((host->first_pending = tmp->next) == NULL)
776 host->last_pending = NULL;
777 } else {
778 prev->next = tmp->next;
779 if (tmp == host->last_pending)
780 host->last_pending = prev;
781 }
782 tmp->next = NULL;
783 break;
784 }
785 prev = tmp;
786 tmp = tmp->next;
787 }
788}
789
790static void initio_append_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
791{
792
793#if DEBUG_QUEUE
794 printk("append busy SCB %p; ", scbp);
795#endif
796 if (scbp->tagmsg)
797 host->act_tags[scbp->target]++;
798 else
799 host->targets[scbp->target].flags |= TCF_BUSY;
800 scbp->status = SCB_BUSY;
801 scbp->next = NULL;
802 if (host->last_busy != NULL) {
803 host->last_busy->next = scbp;
804 host->last_busy = scbp;
805 } else {
806 host->first_busy = scbp;
807 host->last_busy = scbp;
808 }
809}
810
811/***************************************************************************/
812static struct scsi_ctrl_blk *initio_pop_busy_scb(struct initio_host * host)
813{
814 struct scsi_ctrl_blk *tmp;
815
816
817 if ((tmp = host->first_busy) != NULL) {
818 if ((host->first_busy = tmp->next) == NULL)
819 host->last_busy = NULL;
820 tmp->next = NULL;
821 if (tmp->tagmsg)
822 host->act_tags[tmp->target]--;
823 else
824 host->targets[tmp->target].flags &= ~TCF_BUSY;
825 }
826#if DEBUG_QUEUE
827 printk("Pop busy SCB %p; ", tmp);
828#endif
829 return tmp;
830}
831
832/***************************************************************************/
833static void initio_unlink_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scb)
834{
835 struct scsi_ctrl_blk *tmp, *prev;
836
837#if DEBUG_QUEUE
838 printk("unlink busy SCB %p; ", scb);
839#endif
840
841 prev = tmp = host->first_busy;
842 while (tmp != NULL) {
843 if (scb == tmp) { /* Unlink this SCB */
844 if (tmp == host->first_busy) {
845 if ((host->first_busy = tmp->next) == NULL)
846 host->last_busy = NULL;
847 } else {
848 prev->next = tmp->next;
849 if (tmp == host->last_busy)
850 host->last_busy = prev;
851 }
852 tmp->next = NULL;
853 if (tmp->tagmsg)
854 host->act_tags[tmp->target]--;
855 else
856 host->targets[tmp->target].flags &= ~TCF_BUSY;
857 break;
858 }
859 prev = tmp;
860 tmp = tmp->next;
861 }
862 return;
863}
864
865struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun)
866{
867 struct scsi_ctrl_blk *tmp;
868 u16 scbp_tarlun;
869
870
871 tmp = host->first_busy;
872 while (tmp != NULL) {
873 scbp_tarlun = (tmp->lun << 8) | (tmp->target);
874 if (scbp_tarlun == tarlun) { /* Unlink this SCB */
875 break;
876 }
877 tmp = tmp->next;
878 }
879#if DEBUG_QUEUE
880 printk("find busy SCB %p; ", tmp);
881#endif
882 return tmp;
883}
884
885static void initio_append_done_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
886{
887#if DEBUG_QUEUE
888 printk("append done SCB %p; ", scbp);
889#endif
890
891 scbp->status = SCB_DONE;
892 scbp->next = NULL;
893 if (host->last_done != NULL) {
894 host->last_done->next = scbp;
895 host->last_done = scbp;
896 } else {
897 host->first_done = scbp;
898 host->last_done = scbp;
899 }
900}
901
902struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host)
903{
904 struct scsi_ctrl_blk *tmp;
905
906 if ((tmp = host->first_done) != NULL) {
907 if ((host->first_done = tmp->next) == NULL)
908 host->last_done = NULL;
909 tmp->next = NULL;
910 }
911#if DEBUG_QUEUE
912 printk("find done SCB %p; ",tmp);
913#endif
914 return tmp;
915}
916
917static int initio_abort_srb(struct initio_host * host, struct scsi_cmnd *srbp)
918{
919 unsigned long flags;
920 struct scsi_ctrl_blk *tmp, *prev;
921
922 spin_lock_irqsave(&host->semaph_lock, flags);
923
924 if ((host->semaph == 0) && (host->active == NULL)) {
925 /* disable Jasmin SCSI Int */
926 outb(0x1F, host->addr + TUL_Mask);
927 spin_unlock_irqrestore(&host->semaph_lock, flags);
928 /* FIXME: synchronize_irq needed ? */
929 tulip_main(host);
930 spin_lock_irqsave(&host->semaph_lock, flags);
931 host->semaph = 1;
932 outb(0x0F, host->addr + TUL_Mask);
933 spin_unlock_irqrestore(&host->semaph_lock, flags);
934 return SCSI_ABORT_SNOOZE;
935 }
936 prev = tmp = host->first_pending; /* Check Pend queue */
937 while (tmp != NULL) {
938 /* 07/27/98 */
939 if (tmp->srb == srbp) {
940 if (tmp == host->active) {
941 spin_unlock_irqrestore(&host->semaph_lock, flags);
942 return SCSI_ABORT_BUSY;
943 } else if (tmp == host->first_pending) {
944 if ((host->first_pending = tmp->next) == NULL)
945 host->last_pending = NULL;
946 } else {
947 prev->next = tmp->next;
948 if (tmp == host->last_pending)
949 host->last_pending = prev;
950 }
951 tmp->hastat = HOST_ABORTED;
952 tmp->flags |= SCF_DONE;
953 if (tmp->flags & SCF_POST)
954 (*tmp->post) ((u8 *) host, (u8 *) tmp);
955 spin_unlock_irqrestore(&host->semaph_lock, flags);
956 return SCSI_ABORT_SUCCESS;
957 }
958 prev = tmp;
959 tmp = tmp->next;
960 }
961
962 prev = tmp = host->first_busy; /* Check Busy queue */
963 while (tmp != NULL) {
964 if (tmp->srb == srbp) {
965 if (tmp == host->active) {
966 spin_unlock_irqrestore(&host->semaph_lock, flags);
967 return SCSI_ABORT_BUSY;
968 } else if (tmp->tagmsg == 0) {
969 spin_unlock_irqrestore(&host->semaph_lock, flags);
970 return SCSI_ABORT_BUSY;
971 } else {
972 host->act_tags[tmp->target]--;
973 if (tmp == host->first_busy) {
974 if ((host->first_busy = tmp->next) == NULL)
975 host->last_busy = NULL;
976 } else {
977 prev->next = tmp->next;
978 if (tmp == host->last_busy)
979 host->last_busy = prev;
980 }
981 tmp->next = NULL;
982
983
984 tmp->hastat = HOST_ABORTED;
985 tmp->flags |= SCF_DONE;
986 if (tmp->flags & SCF_POST)
987 (*tmp->post) ((u8 *) host, (u8 *) tmp);
988 spin_unlock_irqrestore(&host->semaph_lock, flags);
989 return SCSI_ABORT_SUCCESS;
990 }
991 }
992 prev = tmp;
993 tmp = tmp->next;
994 }
995 spin_unlock_irqrestore(&host->semaph_lock, flags);
996 return SCSI_ABORT_NOT_RUNNING;
997}
998
999/***************************************************************************/
1000static int initio_bad_seq(struct initio_host * host)
1001{
1002 struct scsi_ctrl_blk *scb;
1003
1004 printk("initio_bad_seg c=%d\n", host->index);
1005
1006 if ((scb = host->active) != NULL) {
1007 initio_unlink_busy_scb(host, scb);
1008 scb->hastat = HOST_BAD_PHAS;
1009 scb->tastat = 0;
1010 initio_append_done_scb(host, scb);
1011 }
1012 initio_stop_bm(host);
1013 initio_reset_scsi(host, 8); /* 7/29/98 */
1014 return initio_post_scsi_rst(host);
1015}
1016
1017
1018/************************************************************************/
1019static void initio_exec_scb(struct initio_host * host, struct scsi_ctrl_blk * scb)
1020{
1021 unsigned long flags;
1022
1023 scb->mode = 0;
1024
1025 scb->sgidx = 0;
1026 scb->sgmax = scb->sglen;
1027
1028 spin_lock_irqsave(&host->semaph_lock, flags);
1029
1030 initio_append_pend_scb(host, scb); /* Append this SCB to Pending queue */
1031
1032/* VVVVV 07/21/98 */
1033 if (host->semaph == 1) {
1034 /* Disable Jasmin SCSI Int */
1035 outb(0x1F, host->addr + TUL_Mask);
1036 host->semaph = 0;
1037 spin_unlock_irqrestore(&host->semaph_lock, flags);
1038
1039 tulip_main(host);
1040
1041 spin_lock_irqsave(&host->semaph_lock, flags);
1042 host->semaph = 1;
1043 outb(0x0F, host->addr + TUL_Mask);
1044 }
1045 spin_unlock_irqrestore(&host->semaph_lock, flags);
1046 return;
1047}
1048
1049/***************************************************************************/
1050static int initio_isr(struct initio_host * host)
1051{
1052 if (inb(host->addr + TUL_Int) & TSS_INT_PENDING) {
1053 if (host->semaph == 1) {
1054 outb(0x1F, host->addr + TUL_Mask);
1055 /* Disable Tulip SCSI Int */
1056 host->semaph = 0;
1057
1058 tulip_main(host);
1059
1060 host->semaph = 1;
1061 outb(0x0F, host->addr + TUL_Mask);
1062 return 1;
1063 }
1064 }
1065 return 0;
1066}
1067
1068static int tulip_main(struct initio_host * host)
1069{
1070 struct scsi_ctrl_blk *scb;
1071
1072 for (;;) {
1073 tulip_scsi(host); /* Call tulip_scsi */
1074
1075 /* Walk the list of completed SCBs */
1076 while ((scb = initio_find_done_scb(host)) != NULL) { /* find done entry */
1077 if (scb->tastat == INI_QUEUE_FULL) {
1078 host->max_tags[scb->target] =
1079 host->act_tags[scb->target] - 1;
1080 scb->tastat = 0;
1081 initio_append_pend_scb(host, scb);
1082 continue;
1083 }
1084 if (!(scb->mode & SCM_RSENS)) { /* not in auto req. sense mode */
1085 if (scb->tastat == 2) {
1086
1087 /* clr sync. nego flag */
1088
1089 if (scb->flags & SCF_SENSE) {
1090 u8 len;
1091 len = scb->senselen;
1092 if (len == 0)
1093 len = 1;
1094 scb->buflen = scb->senselen;
1095 scb->bufptr = scb->senseptr;
1096 scb->flags &= ~(SCF_SG | SCF_DIR); /* for xfer_data_in */
1097 /* so, we won't report wrong direction in xfer_data_in,
1098 and won't report HOST_DO_DU in state_6 */
1099 scb->mode = SCM_RSENS;
1100 scb->ident &= 0xBF; /* Disable Disconnect */
1101 scb->tagmsg = 0;
1102 scb->tastat = 0;
1103 scb->cdblen = 6;
1104 scb->cdb[0] = SCSICMD_RequestSense;
1105 scb->cdb[1] = 0;
1106 scb->cdb[2] = 0;
1107 scb->cdb[3] = 0;
1108 scb->cdb[4] = len;
1109 scb->cdb[5] = 0;
1110 initio_push_pend_scb(host, scb);
1111 break;
1112 }
1113 }
1114 } else { /* in request sense mode */
1115
1116 if (scb->tastat == 2) { /* check contition status again after sending
1117 requset sense cmd 0x3 */
1118 scb->hastat = HOST_BAD_PHAS;
1119 }
1120 scb->tastat = 2;
1121 }
1122 scb->flags |= SCF_DONE;
1123 if (scb->flags & SCF_POST) {
1124 /* FIXME: only one post method and lose casts */
1125 (*scb->post) ((u8 *) host, (u8 *) scb);
1126 }
1127 } /* while */
1128 /* find_active: */
1129 if (inb(host->addr + TUL_SStatus0) & TSS_INT_PENDING)
1130 continue;
1131 if (host->active) /* return to OS and wait for xfer_done_ISR/Selected_ISR */
1132 return 1; /* return to OS, enable interrupt */
1133 /* Check pending SCB */
1134 if (initio_find_first_pend_scb(host) == NULL)
1135 return 1; /* return to OS, enable interrupt */
1136 } /* End of for loop */
1137 /* statement won't reach here */
1138}
1139
1140static void tulip_scsi(struct initio_host * host)
1141{
1142 struct scsi_ctrl_blk *scb;
1143 struct target_control *active_tc;
1144
1145 /* make sure to service interrupt asap */
1146 if ((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING) {
1147 host->phase = host->jsstatus0 & TSS_PH_MASK;
1148 host->jsstatus1 = inb(host->addr + TUL_SStatus1);
1149 host->jsint = inb(host->addr + TUL_SInt);
1150 if (host->jsint & TSS_SCSIRST_INT) { /* SCSI bus reset detected */
1151 int_initio_scsi_rst(host);
1152 return;
1153 }
1154 if (host->jsint & TSS_RESEL_INT) { /* if selected/reselected interrupt */
1155 if (int_initio_resel(host) == 0)
1156 initio_next_state(host);
1157 return;
1158 }
1159 if (host->jsint & TSS_SEL_TIMEOUT) {
1160 int_initio_busfree(host);
1161 return;
1162 }
1163 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
1164 int_initio_busfree(host); /* unexpected bus free or sel timeout */
1165 return;
1166 }
1167 if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV)) { /* func complete or Bus service */
1168 if (host->active)
1169 initio_next_state(host);
1170 return;
1171 }
1172 }
1173 if (host->active != NULL)
1174 return;
1175
1176 if ((scb = initio_find_first_pend_scb(host)) == NULL)
1177 return;
1178
1179 /* program HBA's SCSI ID & target SCSI ID */
1180 outb((host->scsi_id << 4) | (scb->target & 0x0F),
1181 host->addr + TUL_SScsiId);
1182 if (scb->opcode == ExecSCSI) {
1183 active_tc = &host->targets[scb->target];
1184
1185 if (scb->tagmsg)
1186 active_tc->drv_flags |= TCF_DRV_EN_TAG;
1187 else
1188 active_tc->drv_flags &= ~TCF_DRV_EN_TAG;
1189
1190 outb(active_tc->js_period, host->addr + TUL_SPeriod);
1191 if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) { /* do wdtr negotiation */
1192 initio_select_atn_stop(host, scb);
1193 } else {
1194 if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) { /* do sync negotiation */
1195 initio_select_atn_stop(host, scb);
1196 } else {
1197 if (scb->tagmsg)
1198 initio_select_atn3(host, scb);
1199 else
1200 initio_select_atn(host, scb);
1201 }
1202 }
1203 if (scb->flags & SCF_POLL) {
1204 while (wait_tulip(host) != -1) {
1205 if (initio_next_state(host) == -1)
1206 break;
1207 }
1208 }
1209 } else if (scb->opcode == BusDevRst) {
1210 initio_select_atn_stop(host, scb);
1211 scb->next_state = 8;
1212 if (scb->flags & SCF_POLL) {
1213 while (wait_tulip(host) != -1) {
1214 if (initio_next_state(host) == -1)
1215 break;
1216 }
1217 }
1218 } else if (scb->opcode == AbortCmd) {
1219 if (initio_abort_srb(host, scb->srb) != 0) {
1220 initio_unlink_pend_scb(host, scb);
1221 initio_release_scb(host, scb);
1222 } else {
1223 scb->opcode = BusDevRst;
1224 initio_select_atn_stop(host, scb);
1225 scb->next_state = 8;
1226 }
1227 } else {
1228 initio_unlink_pend_scb(host, scb);
1229 scb->hastat = 0x16; /* bad command */
1230 initio_append_done_scb(host, scb);
1231 }
1232 return;
1233}
1234
1235/**
1236 * initio_next_state - Next SCSI state
1237 * @host: InitIO host we are processing
1238 *
1239 * Progress the active command block along the state machine
1240 * until we hit a state which we must wait for activity to occur.
1241 *
1242 * Returns zero or a negative code.
1243 */
1244
1245static int initio_next_state(struct initio_host * host)
1246{
1247 int next;
1248
1249 next = host->active->next_state;
1250 for (;;) {
1251 switch (next) {
1252 case 1:
1253 next = initio_state_1(host);
1254 break;
1255 case 2:
1256 next = initio_state_2(host);
1257 break;
1258 case 3:
1259 next = initio_state_3(host);
1260 break;
1261 case 4:
1262 next = initio_state_4(host);
1263 break;
1264 case 5:
1265 next = initio_state_5(host);
1266 break;
1267 case 6:
1268 next = initio_state_6(host);
1269 break;
1270 case 7:
1271 next = initio_state_7(host);
1272 break;
1273 case 8:
1274 return initio_bus_device_reset(host);
1275 default:
1276 return initio_bad_seq(host);
1277 }
1278 if (next <= 0)
1279 return next;
1280 }
1281}
1282
1283
1284/**
1285 * initio_state_1 - SCSI state machine
1286 * @host: InitIO host we are controlling
1287 *
1288 * Perform SCSI state processing for Select/Attention/Stop
1289 */
1290
1291static int initio_state_1(struct initio_host * host)
1292{
1293 struct scsi_ctrl_blk *scb = host->active;
1294 struct target_control *active_tc = host->active_tc;
1295#if DEBUG_STATE
1296 printk("-s1-");
1297#endif
1298
1299 /* Move the SCB from pending to busy */
1300 initio_unlink_pend_scb(host, scb);
1301 initio_append_busy_scb(host, scb);
1302
1303 outb(active_tc->sconfig0, host->addr + TUL_SConfig );
1304 /* ATN on */
1305 if (host->phase == MSG_OUT) {
1306 outb(TSC_EN_BUS_IN | TSC_HW_RESELECT, host->addr + TUL_SCtrl1);
1307 outb(scb->ident, host->addr + TUL_SFifo);
1308
1309 if (scb->tagmsg) {
1310 outb(scb->tagmsg, host->addr + TUL_SFifo);
1311 outb(scb->tagid, host->addr + TUL_SFifo);
1312 }
1313 if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) {
1314 active_tc->flags |= TCF_WDTR_DONE;
1315 outb(EXTENDED_MESSAGE, host->addr + TUL_SFifo);
1316 outb(2, host->addr + TUL_SFifo); /* Extended msg length */
1317 outb(EXTENDED_SDTR, host->addr + TUL_SFifo); /* Sync request */
1318 outb(1, host->addr + TUL_SFifo); /* Start from 16 bits */
1319 } else if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) {
1320 active_tc->flags |= TCF_SYNC_DONE;
1321 outb(EXTENDED_MESSAGE, host->addr + TUL_SFifo);
1322 outb(3, host->addr + TUL_SFifo); /* extended msg length */
1323 outb(EXTENDED_SDTR, host->addr + TUL_SFifo); /* sync request */
1324 outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo);
1325 outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */
1326 }
1327 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1328 if (wait_tulip(host) == -1)
1329 return -1;
1330 }
1331 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1332 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal);
1333 /* Into before CDB xfer */
1334 return 3;
1335}
1336
1337
1338/**
1339 * initio_state_2 - SCSI state machine
1340 * @host: InitIO host we are controlling
1341 *
1342 * state after selection with attention
1343 * state after selection with attention3
1344 */
1345
1346static int initio_state_2(struct initio_host * host)
1347{
1348 struct scsi_ctrl_blk *scb = host->active;
1349 struct target_control *active_tc = host->active_tc;
1350#if DEBUG_STATE
1351 printk("-s2-");
1352#endif
1353
1354 initio_unlink_pend_scb(host, scb);
1355 initio_append_busy_scb(host, scb);
1356
1357 outb(active_tc->sconfig0, host->addr + TUL_SConfig);
1358
1359 if (host->jsstatus1 & TSS_CMD_PH_CMP)
1360 return 4;
1361
1362 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1363 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal);
1364 /* Into before CDB xfer */
1365 return 3;
1366}
1367
1368/**
1369 * initio_state_3 - SCSI state machine
1370 * @host: InitIO host we are controlling
1371 *
1372 * state before CDB xfer is done
1373 */
1374
1375static int initio_state_3(struct initio_host * host)
1376{
1377 struct scsi_ctrl_blk *scb = host->active;
1378 struct target_control *active_tc = host->active_tc;
1379 int i;
1380
1381#if DEBUG_STATE
1382 printk("-s3-");
1383#endif
1384 for (;;) {
1385 switch (host->phase) {
1386 case CMD_OUT: /* Command out phase */
1387 for (i = 0; i < (int) scb->cdblen; i++)
1388 outb(scb->cdb[i], host->addr + TUL_SFifo);
1389 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1390 if (wait_tulip(host) == -1)
1391 return -1;
1392 if (host->phase == CMD_OUT)
1393 return initio_bad_seq(host);
1394 return 4;
1395
1396 case MSG_IN: /* Message in phase */
1397 scb->next_state = 3;
1398 if (initio_msgin(host) == -1)
1399 return -1;
1400 break;
1401
1402 case STATUS_IN: /* Status phase */
1403 if (initio_status_msg(host) == -1)
1404 return -1;
1405 break;
1406
1407 case MSG_OUT: /* Message out phase */
1408 if (active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) {
1409 outb(NOP, host->addr + TUL_SFifo); /* msg nop */
1410 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1411 if (wait_tulip(host) == -1)
1412 return -1;
1413 } else {
1414 active_tc->flags |= TCF_SYNC_DONE;
1415
1416 outb(EXTENDED_MESSAGE, host->addr + TUL_SFifo);
1417 outb(3, host->addr + TUL_SFifo); /* ext. msg len */
1418 outb(EXTENDED_SDTR, host->addr + TUL_SFifo); /* sync request */
1419 outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo);
1420 outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */
1421 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1422 if (wait_tulip(host) == -1)
1423 return -1;
1424 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1425 outb(inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7), host->addr + TUL_SSignal);
1426
1427 }
1428 break;
1429 default:
1430 return initio_bad_seq(host);
1431 }
1432 }
1433}
1434
1435/**
1436 * initio_state_4 - SCSI state machine
1437 * @host: InitIO host we are controlling
1438 *
1439 * SCSI state machine. State 4
1440 */
1441
1442static int initio_state_4(struct initio_host * host)
1443{
1444 struct scsi_ctrl_blk *scb = host->active;
1445
1446#if DEBUG_STATE
1447 printk("-s4-");
1448#endif
1449 if ((scb->flags & SCF_DIR) == SCF_NO_XF) {
1450 return 6; /* Go to state 6 (After data) */
1451 }
1452 for (;;) {
1453 if (scb->buflen == 0)
1454 return 6;
1455
1456 switch (host->phase) {
1457
1458 case STATUS_IN: /* Status phase */
1459 if ((scb->flags & SCF_DIR) != 0) /* if direction bit set then report data underrun */
1460 scb->hastat = HOST_DO_DU;
1461 if ((initio_status_msg(host)) == -1)
1462 return -1;
1463 break;
1464
1465 case MSG_IN: /* Message in phase */
1466 scb->next_state = 0x4;
1467 if (initio_msgin(host) == -1)
1468 return -1;
1469 break;
1470
1471 case MSG_OUT: /* Message out phase */
1472 if (host->jsstatus0 & TSS_PAR_ERROR) {
1473 scb->buflen = 0;
1474 scb->hastat = HOST_DO_DU;
1475 if (initio_msgout_ide(host) == -1)
1476 return -1;
1477 return 6;
1478 } else {
1479 outb(NOP, host->addr + TUL_SFifo); /* msg nop */
1480 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1481 if (wait_tulip(host) == -1)
1482 return -1;
1483 }
1484 break;
1485
1486 case DATA_IN: /* Data in phase */
1487 return initio_xfer_data_in(host);
1488
1489 case DATA_OUT: /* Data out phase */
1490 return initio_xfer_data_out(host);
1491
1492 default:
1493 return initio_bad_seq(host);
1494 }
1495 }
1496}
1497
1498
1499/**
1500 * initio_state_5 - SCSI state machine
1501 * @host: InitIO host we are controlling
1502 *
1503 * State after dma xfer done or phase change before xfer done
1504 */
1505
1506static int initio_state_5(struct initio_host * host)
1507{
1508 struct scsi_ctrl_blk *scb = host->active;
1509 long cnt, xcnt; /* cannot use unsigned !! code: if (xcnt < 0) */
1510
1511#if DEBUG_STATE
1512 printk("-s5-");
1513#endif
1514 /*------ get remaining count -------*/
1515 cnt = inl(host->addr + TUL_SCnt0) & 0x0FFFFFF;
1516
1517 if (inb(host->addr + TUL_XCmd) & 0x20) {
1518 /* ----------------------- DATA_IN ----------------------------- */
1519 /* check scsi parity error */
1520 if (host->jsstatus0 & TSS_PAR_ERROR)
1521 scb->hastat = HOST_DO_DU;
1522 if (inb(host->addr + TUL_XStatus) & XPEND) { /* DMA xfer pending, Send STOP */
1523 /* tell Hardware scsi xfer has been terminated */
1524 outb(inb(host->addr + TUL_XCtrl) | 0x80, host->addr + TUL_XCtrl);
1525 /* wait until DMA xfer not pending */
1526 while (inb(host->addr + TUL_XStatus) & XPEND)
1527 cpu_relax();
1528 }
1529 } else {
1530 /*-------- DATA OUT -----------*/
1531 if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0) {
1532 if (host->active_tc->js_period & TSC_WIDE_SCSI)
1533 cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F) << 1;
1534 else
1535 cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F);
1536 }
1537 if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */
1538 outb(TAX_X_ABT, host->addr + TUL_XCmd);
1539 /* wait Abort DMA xfer done */
1540 while ((inb(host->addr + TUL_Int) & XABT) == 0)
1541 cpu_relax();
1542 }
1543 if ((cnt == 1) && (host->phase == DATA_OUT)) {
1544 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1545 if (wait_tulip(host) == -1)
1546 return -1;
1547 cnt = 0;
1548 } else {
1549 if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0)
1550 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1551 }
1552 }
1553 if (cnt == 0) {
1554 scb->buflen = 0;
1555 return 6; /* After Data */
1556 }
1557 /* Update active data pointer */
1558 xcnt = (long) scb->buflen - cnt; /* xcnt== bytes already xferred */
1559 scb->buflen = (u32) cnt; /* cnt == bytes left to be xferred */
1560 if (scb->flags & SCF_SG) {
1561 struct sg_entry *sgp;
1562 unsigned long i;
1563
1564 sgp = &scb->sglist[scb->sgidx];
1565 for (i = scb->sgidx; i < scb->sgmax; sgp++, i++) {
1566 xcnt -= (long) sgp->len;
1567 if (xcnt < 0) { /* this sgp xfer half done */
1568 xcnt += (long) sgp->len; /* xcnt == bytes xferred in this sgp */
1569 sgp->data += (u32) xcnt; /* new ptr to be xfer */
1570 sgp->len -= (u32) xcnt; /* new len to be xfer */
1571 scb->bufptr += ((u32) (i - scb->sgidx) << 3);
1572 /* new SG table ptr */
1573 scb->sglen = (u8) (scb->sgmax - i);
1574 /* new SG table len */
1575 scb->sgidx = (u16) i;
1576 /* for next disc and come in this loop */
1577 return 4; /* Go to state 4 */
1578 }
1579 /* else (xcnt >= 0 , i.e. this sgp already xferred */
1580 } /* for */
1581 return 6; /* Go to state 6 */
1582 } else {
1583 scb->bufptr += (u32) xcnt;
1584 }
1585 return 4; /* Go to state 4 */
1586}
1587
1588/**
1589 * initio_state_6 - SCSI state machine
1590 * @host: InitIO host we are controlling
1591 *
1592 * State after Data phase
1593 */
1594
1595static int initio_state_6(struct initio_host * host)
1596{
1597 struct scsi_ctrl_blk *scb = host->active;
1598
1599#if DEBUG_STATE
1600 printk("-s6-");
1601#endif
1602 for (;;) {
1603 switch (host->phase) {
1604 case STATUS_IN: /* Status phase */
1605 if ((initio_status_msg(host)) == -1)
1606 return -1;
1607 break;
1608
1609 case MSG_IN: /* Message in phase */
1610 scb->next_state = 6;
1611 if ((initio_msgin(host)) == -1)
1612 return -1;
1613 break;
1614
1615 case MSG_OUT: /* Message out phase */
1616 outb(NOP, host->addr + TUL_SFifo); /* msg nop */
1617 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1618 if (wait_tulip(host) == -1)
1619 return -1;
1620 break;
1621
1622 case DATA_IN: /* Data in phase */
1623 return initio_xpad_in(host);
1624
1625 case DATA_OUT: /* Data out phase */
1626 return initio_xpad_out(host);
1627
1628 default:
1629 return initio_bad_seq(host);
1630 }
1631 }
1632}
1633
1634/**
1635 * initio_state_7 - SCSI state machine
1636 * @host: InitIO host we are controlling
1637 *
1638 */
1639
1640static int initio_state_7(struct initio_host * host)
1641{
1642 int cnt, i;
1643
1644#if DEBUG_STATE
1645 printk("-s7-");
1646#endif
1647 /* flush SCSI FIFO */
1648 cnt = inb(host->addr + TUL_SFifoCnt) & 0x1F;
1649 if (cnt) {
1650 for (i = 0; i < cnt; i++)
1651 inb(host->addr + TUL_SFifo);
1652 }
1653 switch (host->phase) {
1654 case DATA_IN: /* Data in phase */
1655 case DATA_OUT: /* Data out phase */
1656 return initio_bad_seq(host);
1657 default:
1658 return 6; /* Go to state 6 */
1659 }
1660}
1661
1662/**
1663 * initio_xfer_data_in - Commence data input
1664 * @host: InitIO host in use
1665 *
1666 * Commence a block of data transfer. The transfer itself will
1667 * be managed by the controller and we will get a completion (or
1668 * failure) interrupt.
1669 */
1670static int initio_xfer_data_in(struct initio_host * host)
1671{
1672 struct scsi_ctrl_blk *scb = host->active;
1673
1674 if ((scb->flags & SCF_DIR) == SCF_DOUT)
1675 return 6; /* wrong direction */
1676
1677 outl(scb->buflen, host->addr + TUL_SCnt0);
1678 outb(TSC_XF_DMA_IN, host->addr + TUL_SCmd); /* 7/25/95 */
1679
1680 if (scb->flags & SCF_SG) { /* S/G xfer */
1681 outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH);
1682 outl(scb->bufptr, host->addr + TUL_XAddH);
1683 outb(TAX_SG_IN, host->addr + TUL_XCmd);
1684 } else {
1685 outl(scb->buflen, host->addr + TUL_XCntH);
1686 outl(scb->bufptr, host->addr + TUL_XAddH);
1687 outb(TAX_X_IN, host->addr + TUL_XCmd);
1688 }
1689 scb->next_state = 0x5;
1690 return 0; /* return to OS, wait xfer done , let jas_isr come in */
1691}
1692
1693/**
1694 * initio_xfer_data_out - Commence data output
1695 * @host: InitIO host in use
1696 *
1697 * Commence a block of data transfer. The transfer itself will
1698 * be managed by the controller and we will get a completion (or
1699 * failure) interrupt.
1700 */
1701
1702static int initio_xfer_data_out(struct initio_host * host)
1703{
1704 struct scsi_ctrl_blk *scb = host->active;
1705
1706 if ((scb->flags & SCF_DIR) == SCF_DIN)
1707 return 6; /* wrong direction */
1708
1709 outl(scb->buflen, host->addr + TUL_SCnt0);
1710 outb(TSC_XF_DMA_OUT, host->addr + TUL_SCmd);
1711
1712 if (scb->flags & SCF_SG) { /* S/G xfer */
1713 outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH);
1714 outl(scb->bufptr, host->addr + TUL_XAddH);
1715 outb(TAX_SG_OUT, host->addr + TUL_XCmd);
1716 } else {
1717 outl(scb->buflen, host->addr + TUL_XCntH);
1718 outl(scb->bufptr, host->addr + TUL_XAddH);
1719 outb(TAX_X_OUT, host->addr + TUL_XCmd);
1720 }
1721
1722 scb->next_state = 0x5;
1723 return 0; /* return to OS, wait xfer done , let jas_isr come in */
1724}
1725
1726int initio_xpad_in(struct initio_host * host)
1727{
1728 struct scsi_ctrl_blk *scb = host->active;
1729 struct target_control *active_tc = host->active_tc;
1730
1731 if ((scb->flags & SCF_DIR) != SCF_NO_DCHK)
1732 scb->hastat = HOST_DO_DU; /* over run */
1733 for (;;) {
1734 if (active_tc->js_period & TSC_WIDE_SCSI)
1735 outl(2, host->addr + TUL_SCnt0);
1736 else
1737 outl(1, host->addr + TUL_SCnt0);
1738
1739 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
1740 if (wait_tulip(host) == -1)
1741 return -1;
1742 if (host->phase != DATA_IN) {
1743 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1744 return 6;
1745 }
1746 inb(host->addr + TUL_SFifo);
1747 }
1748}
1749
1750int initio_xpad_out(struct initio_host * host)
1751{
1752 struct scsi_ctrl_blk *scb = host->active;
1753 struct target_control *active_tc = host->active_tc;
1754
1755 if ((scb->flags & SCF_DIR) != SCF_NO_DCHK)
1756 scb->hastat = HOST_DO_DU; /* over run */
1757 for (;;) {
1758 if (active_tc->js_period & TSC_WIDE_SCSI)
1759 outl(2, host->addr + TUL_SCnt0);
1760 else
1761 outl(1, host->addr + TUL_SCnt0);
1762
1763 outb(0, host->addr + TUL_SFifo);
1764 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1765 if ((wait_tulip(host)) == -1)
1766 return -1;
1767 if (host->phase != DATA_OUT) { /* Disable wide CPU to allow read 16 bits */
1768 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1);
1769 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1770 return 6;
1771 }
1772 }
1773}
1774
1775int initio_status_msg(struct initio_host * host)
1776{ /* status & MSG_IN */
1777 struct scsi_ctrl_blk *scb = host->active;
1778 u8 msg;
1779
1780 outb(TSC_CMD_COMP, host->addr + TUL_SCmd);
1781 if (wait_tulip(host) == -1)
1782 return -1;
1783
1784 /* get status */
1785 scb->tastat = inb(host->addr + TUL_SFifo);
1786
1787 if (host->phase == MSG_OUT) {
1788 if (host->jsstatus0 & TSS_PAR_ERROR)
1789 outb(MSG_PARITY_ERROR, host->addr + TUL_SFifo);
1790 else
1791 outb(NOP, host->addr + TUL_SFifo);
1792 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1793 return wait_tulip(host);
1794 }
1795 if (host->phase == MSG_IN) {
1796 msg = inb(host->addr + TUL_SFifo);
1797 if (host->jsstatus0 & TSS_PAR_ERROR) { /* Parity error */
1798 if ((initio_msgin_accept(host)) == -1)
1799 return -1;
1800 if (host->phase != MSG_OUT)
1801 return initio_bad_seq(host);
1802 outb(MSG_PARITY_ERROR, host->addr + TUL_SFifo);
1803 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1804 return wait_tulip(host);
1805 }
1806 if (msg == 0) { /* Command complete */
1807
1808 if ((scb->tastat & 0x18) == 0x10) /* No link support */
1809 return initio_bad_seq(host);
1810 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1811 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
1812 return initio_wait_done_disc(host);
1813
1814 }
1815 if (msg == LINKED_CMD_COMPLETE ||
1816 msg == LINKED_FLG_CMD_COMPLETE) {
1817 if ((scb->tastat & 0x18) == 0x10)
1818 return initio_msgin_accept(host);
1819 }
1820 }
1821 return initio_bad_seq(host);
1822}
1823
1824
1825/* scsi bus free */
1826int int_initio_busfree(struct initio_host * host)
1827{
1828 struct scsi_ctrl_blk *scb = host->active;
1829
1830 if (scb != NULL) {
1831 if (scb->status & SCB_SELECT) { /* selection timeout */
1832 initio_unlink_pend_scb(host, scb);
1833 scb->hastat = HOST_SEL_TOUT;
1834 initio_append_done_scb(host, scb);
1835 } else { /* Unexpected bus free */
1836 initio_unlink_busy_scb(host, scb);
1837 scb->hastat = HOST_BUS_FREE;
1838 initio_append_done_scb(host, scb);
1839 }
1840 host->active = NULL;
1841 host->active_tc = NULL;
1842 }
1843 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
1844 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
1845 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
1846 return -1;
1847}
1848
1849
1850/**
1851 * int_initio_scsi_rst - SCSI reset occurred
1852 * @host: Host seeing the reset
1853 *
1854 * A SCSI bus reset has occurred. Clean up any pending transfer
1855 * the hardware is doing by DMA and then abort all active and
1856 * disconnected commands. The mid layer should sort the rest out
1857 * for us
1858 */
1859
1860static int int_initio_scsi_rst(struct initio_host * host)
1861{
1862 struct scsi_ctrl_blk *scb;
1863 int i;
1864
1865 /* if DMA xfer is pending, abort DMA xfer */
1866 if (inb(host->addr + TUL_XStatus) & 0x01) {
1867 outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd);
1868 /* wait Abort DMA xfer done */
1869 while ((inb(host->addr + TUL_Int) & 0x04) == 0)
1870 cpu_relax();
1871 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1872 }
1873 /* Abort all active & disconnected scb */
1874 while ((scb = initio_pop_busy_scb(host)) != NULL) {
1875 scb->hastat = HOST_BAD_PHAS;
1876 initio_append_done_scb(host, scb);
1877 }
1878 host->active = NULL;
1879 host->active_tc = NULL;
1880
1881 /* clr sync nego. done flag */
1882 for (i = 0; i < host->max_tar; i++)
1883 host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
1884 return -1;
1885}
1886
1887/**
1888 * int_initio_resel - Reselection occurred
1889 * @host: InitIO host adapter
1890 *
1891 * A SCSI reselection event has been signalled and the interrupt
1892 * is now being processed. Work out which command block needs attention
1893 * and continue processing that command.
1894 */
1895
1896int int_initio_resel(struct initio_host * host)
1897{
1898 struct scsi_ctrl_blk *scb;
1899 struct target_control *active_tc;
1900 u8 tag, msg = 0;
1901 u8 tar, lun;
1902
1903 if ((scb = host->active) != NULL) {
1904 /* FIXME: Why check and not just clear ? */
1905 if (scb->status & SCB_SELECT) /* if waiting for selection complete */
1906 scb->status &= ~SCB_SELECT;
1907 host->active = NULL;
1908 }
1909 /* --------- get target id---------------------- */
1910 tar = inb(host->addr + TUL_SBusId);
1911 /* ------ get LUN from Identify message----------- */
1912 lun = inb(host->addr + TUL_SIdent) & 0x0F;
1913 /* 07/22/98 from 0x1F -> 0x0F */
1914 active_tc = &host->targets[tar];
1915 host->active_tc = active_tc;
1916 outb(active_tc->sconfig0, host->addr + TUL_SConfig);
1917 outb(active_tc->js_period, host->addr + TUL_SPeriod);
1918
1919 /* ------------- tag queueing ? ------------------- */
1920 if (active_tc->drv_flags & TCF_DRV_EN_TAG) {
1921 if ((initio_msgin_accept(host)) == -1)
1922 return -1;
1923 if (host->phase != MSG_IN)
1924 goto no_tag;
1925 outl(1, host->addr + TUL_SCnt0);
1926 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
1927 if (wait_tulip(host) == -1)
1928 return -1;
1929 msg = inb(host->addr + TUL_SFifo); /* Read Tag Message */
1930
1931 if (msg < SIMPLE_QUEUE_TAG || msg > ORDERED_QUEUE_TAG)
1932 /* Is simple Tag */
1933 goto no_tag;
1934
1935 if (initio_msgin_accept(host) == -1)
1936 return -1;
1937
1938 if (host->phase != MSG_IN)
1939 goto no_tag;
1940
1941 outl(1, host->addr + TUL_SCnt0);
1942 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
1943 if (wait_tulip(host) == -1)
1944 return -1;
1945 tag = inb(host->addr + TUL_SFifo); /* Read Tag ID */
1946 scb = host->scb + tag;
1947 if (scb->target != tar || scb->lun != lun) {
1948 return initio_msgout_abort_tag(host);
1949 }
1950 if (scb->status != SCB_BUSY) { /* 03/24/95 */
1951 return initio_msgout_abort_tag(host);
1952 }
1953 host->active = scb;
1954 if ((initio_msgin_accept(host)) == -1)
1955 return -1;
1956 } else { /* No tag */
1957 no_tag:
1958 if ((scb = initio_find_busy_scb(host, tar | (lun << 8))) == NULL) {
1959 return initio_msgout_abort_targ(host);
1960 }
1961 host->active = scb;
1962 if (!(active_tc->drv_flags & TCF_DRV_EN_TAG)) {
1963 if ((initio_msgin_accept(host)) == -1)
1964 return -1;
1965 }
1966 }
1967 return 0;
1968}
1969
1970/**
1971 * int_initio_bad_seq - out of phase
1972 * @host: InitIO host flagging event
1973 *
1974 * We have ended up out of phase somehow. Reset the host controller
1975 * and throw all our toys out of the pram. Let the midlayer clean up
1976 */
1977
1978static int int_initio_bad_seq(struct initio_host * host)
1979{ /* target wrong phase */
1980 struct scsi_ctrl_blk *scb;
1981 int i;
1982
1983 initio_reset_scsi(host, 10);
1984
1985 while ((scb = initio_pop_busy_scb(host)) != NULL) {
1986 scb->hastat = HOST_BAD_PHAS;
1987 initio_append_done_scb(host, scb);
1988 }
1989 for (i = 0; i < host->max_tar; i++)
1990 host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
1991 return -1;
1992}
1993
1994
1995/**
1996 * initio_msgout_abort_targ - abort a tag
1997 * @host: InitIO host
1998 *
1999 * Abort when the target/lun does not match or when our SCB is not
2000 * busy. Used by untagged commands.
2001 */
2002
2003static int initio_msgout_abort_targ(struct initio_host * host)
2004{
2005
2006 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2007 if (initio_msgin_accept(host) == -1)
2008 return -1;
2009 if (host->phase != MSG_OUT)
2010 return initio_bad_seq(host);
2011
2012 outb(ABORT_TASK_SET, host->addr + TUL_SFifo);
2013 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2014
2015 return initio_wait_disc(host);
2016}
2017
2018/**
2019 * initio_msgout_abort_tag - abort a tag
2020 * @host: InitIO host
2021 *
2022 * Abort when the target/lun does not match or when our SCB is not
2023 * busy. Used for tagged commands.
2024 */
2025
2026static int initio_msgout_abort_tag(struct initio_host * host)
2027{
2028
2029 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2030 if (initio_msgin_accept(host) == -1)
2031 return -1;
2032 if (host->phase != MSG_OUT)
2033 return initio_bad_seq(host);
2034
2035 outb(ABORT_TASK, host->addr + TUL_SFifo);
2036 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2037
2038 return initio_wait_disc(host);
2039
2040}
2041
2042/**
2043 * initio_msgin - Message in
2044 * @host: InitIO Host
2045 *
2046 * Process incoming message
2047 */
2048static int initio_msgin(struct initio_host * host)
2049{
2050 struct target_control *active_tc;
2051
2052 for (;;) {
2053 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
2054
2055 outl(1, host->addr + TUL_SCnt0);
2056 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
2057 if (wait_tulip(host) == -1)
2058 return -1;
2059
2060 switch (inb(host->addr + TUL_SFifo)) {
2061 case DISCONNECT: /* Disconnect msg */
2062 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
2063 return initio_wait_disc(host);
2064 case SAVE_POINTERS:
2065 case RESTORE_POINTERS:
2066 case NOP:
2067 initio_msgin_accept(host);
2068 break;
2069 case MESSAGE_REJECT: /* Clear ATN first */
2070 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)),
2071 host->addr + TUL_SSignal);
2072 active_tc = host->active_tc;
2073 if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) /* do sync nego */
2074 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN),
2075 host->addr + TUL_SSignal);
2076 initio_msgin_accept(host);
2077 break;
2078 case EXTENDED_MESSAGE: /* extended msg */
2079 initio_msgin_extend(host);
2080 break;
2081 case IGNORE_WIDE_RESIDUE:
2082 initio_msgin_accept(host);
2083 break;
2084 case COMMAND_COMPLETE:
2085 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
2086 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
2087 return initio_wait_done_disc(host);
2088 default:
2089 initio_msgout_reject(host);
2090 break;
2091 }
2092 if (host->phase != MSG_IN)
2093 return host->phase;
2094 }
2095 /* statement won't reach here */
2096}
2097
2098static int initio_msgout_reject(struct initio_host * host)
2099{
2100 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2101
2102 if (initio_msgin_accept(host) == -1)
2103 return -1;
2104
2105 if (host->phase == MSG_OUT) {
2106 outb(MESSAGE_REJECT, host->addr + TUL_SFifo); /* Msg reject */
2107 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2108 return wait_tulip(host);
2109 }
2110 return host->phase;
2111}
2112
2113static int initio_msgout_ide(struct initio_host * host)
2114{
2115 outb(INITIATOR_ERROR, host->addr + TUL_SFifo); /* Initiator Detected Error */
2116 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2117 return wait_tulip(host);
2118}
2119
2120static int initio_msgin_extend(struct initio_host * host)
2121{
2122 u8 len, idx;
2123
2124 if (initio_msgin_accept(host) != MSG_IN)
2125 return host->phase;
2126
2127 /* Get extended msg length */
2128 outl(1, host->addr + TUL_SCnt0);
2129 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
2130 if (wait_tulip(host) == -1)
2131 return -1;
2132
2133 len = inb(host->addr + TUL_SFifo);
2134 host->msg[0] = len;
2135 for (idx = 1; len != 0; len--) {
2136
2137 if ((initio_msgin_accept(host)) != MSG_IN)
2138 return host->phase;
2139 outl(1, host->addr + TUL_SCnt0);
2140 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
2141 if (wait_tulip(host) == -1)
2142 return -1;
2143 host->msg[idx++] = inb(host->addr + TUL_SFifo);
2144 }
2145 if (host->msg[1] == 1) { /* if it's synchronous data transfer request */
2146 u8 r;
2147 if (host->msg[0] != 3) /* if length is not right */
2148 return initio_msgout_reject(host);
2149 if (host->active_tc->flags & TCF_NO_SYNC_NEGO) { /* Set OFFSET=0 to do async, nego back */
2150 host->msg[3] = 0;
2151 } else {
2152 if (initio_msgin_sync(host) == 0 &&
2153 (host->active_tc->flags & TCF_SYNC_DONE)) {
2154 initio_sync_done(host);
2155 return initio_msgin_accept(host);
2156 }
2157 }
2158
2159 r = inb(host->addr + TUL_SSignal);
2160 outb((r & (TSC_SET_ACK | 7)) | TSC_SET_ATN,
2161 host->addr + TUL_SSignal);
2162 if (initio_msgin_accept(host) != MSG_OUT)
2163 return host->phase;
2164 /* sync msg out */
2165 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
2166
2167 initio_sync_done(host);
2168
2169 outb(EXTENDED_MESSAGE, host->addr + TUL_SFifo);
2170 outb(3, host->addr + TUL_SFifo);
2171 outb(EXTENDED_SDTR, host->addr + TUL_SFifo);
2172 outb(host->msg[2], host->addr + TUL_SFifo);
2173 outb(host->msg[3], host->addr + TUL_SFifo);
2174 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2175 return wait_tulip(host);
2176 }
2177 if (host->msg[0] != 2 || host->msg[1] != 3)
2178 return initio_msgout_reject(host);
2179 /* if it's WIDE DATA XFER REQ */
2180 if (host->active_tc->flags & TCF_NO_WDTR) {
2181 host->msg[2] = 0;
2182 } else {
2183 if (host->msg[2] > 2) /* > 32 bits */
2184 return initio_msgout_reject(host);
2185 if (host->msg[2] == 2) { /* == 32 */
2186 host->msg[2] = 1;
2187 } else {
2188 if ((host->active_tc->flags & TCF_NO_WDTR) == 0) {
2189 wdtr_done(host);
2190 if ((host->active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0)
2191 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2192 return initio_msgin_accept(host);
2193 }
2194 }
2195 }
2196 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2197
2198 if (initio_msgin_accept(host) != MSG_OUT)
2199 return host->phase;
2200 /* WDTR msg out */
2201 outb(EXTENDED_MESSAGE, host->addr + TUL_SFifo);
2202 outb(2, host->addr + TUL_SFifo);
2203 outb(EXTENDED_WDTR, host->addr + TUL_SFifo);
2204 outb(host->msg[2], host->addr + TUL_SFifo);
2205 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2206 return wait_tulip(host);
2207}
2208
2209static int initio_msgin_sync(struct initio_host * host)
2210{
2211 char default_period;
2212
2213 default_period = initio_rate_tbl[host->active_tc->flags & TCF_SCSI_RATE];
2214 if (host->msg[3] > MAX_OFFSET) {
2215 host->msg[3] = MAX_OFFSET;
2216 if (host->msg[2] < default_period) {
2217 host->msg[2] = default_period;
2218 return 1;
2219 }
2220 if (host->msg[2] >= 59) /* Change to async */
2221 host->msg[3] = 0;
2222 return 1;
2223 }
2224 /* offset requests asynchronous transfers ? */
2225 if (host->msg[3] == 0) {
2226 return 0;
2227 }
2228 if (host->msg[2] < default_period) {
2229 host->msg[2] = default_period;
2230 return 1;
2231 }
2232 if (host->msg[2] >= 59) {
2233 host->msg[3] = 0;
2234 return 1;
2235 }
2236 return 0;
2237}
2238
2239static int wdtr_done(struct initio_host * host)
2240{
2241 host->active_tc->flags &= ~TCF_SYNC_DONE;
2242 host->active_tc->flags |= TCF_WDTR_DONE;
2243
2244 host->active_tc->js_period = 0;
2245 if (host->msg[2]) /* if 16 bit */
2246 host->active_tc->js_period |= TSC_WIDE_SCSI;
2247 host->active_tc->sconfig0 &= ~TSC_ALT_PERIOD;
2248 outb(host->active_tc->sconfig0, host->addr + TUL_SConfig);
2249 outb(host->active_tc->js_period, host->addr + TUL_SPeriod);
2250
2251 return 1;
2252}
2253
2254static int initio_sync_done(struct initio_host * host)
2255{
2256 int i;
2257
2258 host->active_tc->flags |= TCF_SYNC_DONE;
2259
2260 if (host->msg[3]) {
2261 host->active_tc->js_period |= host->msg[3];
2262 for (i = 0; i < 8; i++) {
2263 if (initio_rate_tbl[i] >= host->msg[2]) /* pick the big one */
2264 break;
2265 }
2266 host->active_tc->js_period |= (i << 4);
2267 host->active_tc->sconfig0 |= TSC_ALT_PERIOD;
2268 }
2269 outb(host->active_tc->sconfig0, host->addr + TUL_SConfig);
2270 outb(host->active_tc->js_period, host->addr + TUL_SPeriod);
2271
2272 return -1;
2273}
2274
2275
2276static int initio_post_scsi_rst(struct initio_host * host)
2277{
2278 struct scsi_ctrl_blk *scb;
2279 struct target_control *active_tc;
2280 int i;
2281
2282 host->active = NULL;
2283 host->active_tc = NULL;
2284 host->flags = 0;
2285
2286 while ((scb = initio_pop_busy_scb(host)) != NULL) {
2287 scb->hastat = HOST_BAD_PHAS;
2288 initio_append_done_scb(host, scb);
2289 }
2290 /* clear sync done flag */
2291 active_tc = &host->targets[0];
2292 for (i = 0; i < host->max_tar; active_tc++, i++) {
2293 active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
2294 /* Initialize the sync. xfer register values to an asyn xfer */
2295 active_tc->js_period = 0;
2296 active_tc->sconfig0 = host->sconf1;
2297 host->act_tags[0] = 0; /* 07/22/98 */
2298 host->targets[i].flags &= ~TCF_BUSY; /* 07/22/98 */
2299 } /* for */
2300
2301 return -1;
2302}
2303
2304static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb)
2305{
2306 scb->status |= SCB_SELECT;
2307 scb->next_state = 0x1;
2308 host->active = scb;
2309 host->active_tc = &host->targets[scb->target];
2310 outb(TSC_SELATNSTOP, host->addr + TUL_SCmd);
2311}
2312
2313
2314static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb)
2315{
2316 int i;
2317
2318 scb->status |= SCB_SELECT;
2319 scb->next_state = 0x2;
2320
2321 outb(scb->ident, host->addr + TUL_SFifo);
2322 for (i = 0; i < (int) scb->cdblen; i++)
2323 outb(scb->cdb[i], host->addr + TUL_SFifo);
2324 host->active_tc = &host->targets[scb->target];
2325 host->active = scb;
2326 outb(TSC_SEL_ATN, host->addr + TUL_SCmd);
2327}
2328
2329static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb)
2330{
2331 int i;
2332
2333 scb->status |= SCB_SELECT;
2334 scb->next_state = 0x2;
2335
2336 outb(scb->ident, host->addr + TUL_SFifo);
2337 outb(scb->tagmsg, host->addr + TUL_SFifo);
2338 outb(scb->tagid, host->addr + TUL_SFifo);
2339 for (i = 0; i < scb->cdblen; i++)
2340 outb(scb->cdb[i], host->addr + TUL_SFifo);
2341 host->active_tc = &host->targets[scb->target];
2342 host->active = scb;
2343 outb(TSC_SEL_ATN3, host->addr + TUL_SCmd);
2344}
2345
2346/**
2347 * initio_bus_device_reset - SCSI Bus Device Reset
2348 * @host: InitIO host to reset
2349 *
2350 * Perform a device reset and abort all pending SCBs for the
2351 * victim device
2352 */
2353int initio_bus_device_reset(struct initio_host * host)
2354{
2355 struct scsi_ctrl_blk *scb = host->active;
2356 struct target_control *active_tc = host->active_tc;
2357 struct scsi_ctrl_blk *tmp, *prev;
2358 u8 tar;
2359
2360 if (host->phase != MSG_OUT)
2361 return int_initio_bad_seq(host); /* Unexpected phase */
2362
2363 initio_unlink_pend_scb(host, scb);
2364 initio_release_scb(host, scb);
2365
2366
2367 tar = scb->target; /* target */
2368 active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE | TCF_BUSY);
2369 /* clr sync. nego & WDTR flags 07/22/98 */
2370
2371 /* abort all SCB with same target */
2372 prev = tmp = host->first_busy; /* Check Busy queue */
2373 while (tmp != NULL) {
2374 if (tmp->target == tar) {
2375 /* unlink it */
2376 if (tmp == host->first_busy) {
2377 if ((host->first_busy = tmp->next) == NULL)
2378 host->last_busy = NULL;
2379 } else {
2380 prev->next = tmp->next;
2381 if (tmp == host->last_busy)
2382 host->last_busy = prev;
2383 }
2384 tmp->hastat = HOST_ABORTED;
2385 initio_append_done_scb(host, tmp);
2386 }
2387 /* Previous haven't change */
2388 else {
2389 prev = tmp;
2390 }
2391 tmp = tmp->next;
2392 }
2393 outb(TARGET_RESET, host->addr + TUL_SFifo);
2394 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2395 return initio_wait_disc(host);
2396
2397}
2398
2399static int initio_msgin_accept(struct initio_host * host)
2400{
2401 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
2402 return wait_tulip(host);
2403}
2404
2405static int wait_tulip(struct initio_host * host)
2406{
2407
2408 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0))
2409 & TSS_INT_PENDING))
2410 cpu_relax();
2411
2412 host->jsint = inb(host->addr + TUL_SInt);
2413 host->phase = host->jsstatus0 & TSS_PH_MASK;
2414 host->jsstatus1 = inb(host->addr + TUL_SStatus1);
2415
2416 if (host->jsint & TSS_RESEL_INT) /* if SCSI bus reset detected */
2417 return int_initio_resel(host);
2418 if (host->jsint & TSS_SEL_TIMEOUT) /* if selected/reselected timeout interrupt */
2419 return int_initio_busfree(host);
2420 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */
2421 return int_initio_scsi_rst(host);
2422
2423 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
2424 if (host->flags & HCF_EXPECT_DONE_DISC) {
2425 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2426 initio_unlink_busy_scb(host, host->active);
2427 host->active->hastat = 0;
2428 initio_append_done_scb(host, host->active);
2429 host->active = NULL;
2430 host->active_tc = NULL;
2431 host->flags &= ~HCF_EXPECT_DONE_DISC;
2432 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2433 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2434 return -1;
2435 }
2436 if (host->flags & HCF_EXPECT_DISC) {
2437 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2438 host->active = NULL;
2439 host->active_tc = NULL;
2440 host->flags &= ~HCF_EXPECT_DISC;
2441 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2442 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2443 return -1;
2444 }
2445 return int_initio_busfree(host);
2446 }
2447 /* The old code really does the below. Can probably be removed */
2448 if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV))
2449 return host->phase;
2450 return host->phase;
2451}
2452
2453static int initio_wait_disc(struct initio_host * host)
2454{
2455 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING))
2456 cpu_relax();
2457
2458 host->jsint = inb(host->addr + TUL_SInt);
2459
2460 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */
2461 return int_initio_scsi_rst(host);
2462 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
2463 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2464 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2465 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2466 host->active = NULL;
2467 return -1;
2468 }
2469 return initio_bad_seq(host);
2470}
2471
2472static int initio_wait_done_disc(struct initio_host * host)
2473{
2474 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0))
2475 & TSS_INT_PENDING))
2476 cpu_relax();
2477
2478 host->jsint = inb(host->addr + TUL_SInt);
2479
2480 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */
2481 return int_initio_scsi_rst(host);
2482 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
2483 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2484 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2485 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2486 initio_unlink_busy_scb(host, host->active);
2487
2488 initio_append_done_scb(host, host->active);
2489 host->active = NULL;
2490 return -1;
2491 }
2492 return initio_bad_seq(host);
2493}
2494
2495/**
2496 * i91u_intr - IRQ handler
2497 * @irqno: IRQ number
2498 * @dev_id: IRQ identifier
2499 *
2500 * Take the relevant locks and then invoke the actual isr processing
2501 * code under the lock.
2502 */
2503
2504static irqreturn_t i91u_intr(int irqno, void *dev_id)
2505{
2506 struct Scsi_Host *dev = dev_id;
2507 unsigned long flags;
2508 int r;
2509
2510 spin_lock_irqsave(dev->host_lock, flags);
2511 r = initio_isr((struct initio_host *)dev->hostdata);
2512 spin_unlock_irqrestore(dev->host_lock, flags);
2513 if (r)
2514 return IRQ_HANDLED;
2515 else
2516 return IRQ_NONE;
2517}
2518
2519
2520/**
2521 * initio_build_scb - Build the mappings and SCB
2522 * @host: InitIO host taking the command
2523 * @cblk: Firmware command block
2524 * @cmnd: SCSI midlayer command block
2525 *
2526 * Translate the abstract SCSI command into a firmware command block
2527 * suitable for feeding to the InitIO host controller. This also requires
2528 * we build the scatter gather lists and ensure they are mapped properly.
2529 */
2530
2531static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * cblk, struct scsi_cmnd * cmnd)
2532{ /* Create corresponding SCB */
2533 struct scatterlist *sglist;
2534 struct sg_entry *sg; /* Pointer to SG list */
2535 int i, nseg;
2536 long total_len;
2537 dma_addr_t dma_addr;
2538
2539 /* Fill in the command headers */
2540 cblk->post = i91uSCBPost; /* i91u's callback routine */
2541 cblk->srb = cmnd;
2542 cblk->opcode = ExecSCSI;
2543 cblk->flags = SCF_POST; /* After SCSI done, call post routine */
2544 cblk->target = cmnd->device->id;
2545 cblk->lun = cmnd->device->lun;
2546 cblk->ident = cmnd->device->lun | DISC_ALLOW;
2547
2548 cblk->flags |= SCF_SENSE; /* Turn on auto request sense */
2549
2550 /* Map the sense buffer into bus memory */
2551 dma_addr = dma_map_single(&host->pci_dev->dev, cmnd->sense_buffer,
2552 SENSE_SIZE, DMA_FROM_DEVICE);
2553 cblk->senseptr = (u32)dma_addr;
2554 cblk->senselen = SENSE_SIZE;
2555 initio_priv(cmnd)->sense_dma_addr = dma_addr;
2556 cblk->cdblen = cmnd->cmd_len;
2557
2558 /* Clear the returned status */
2559 cblk->hastat = 0;
2560 cblk->tastat = 0;
2561 /* Command the command */
2562 memcpy(cblk->cdb, cmnd->cmnd, cmnd->cmd_len);
2563
2564 /* Set up tags */
2565 if (cmnd->device->tagged_supported) { /* Tag Support */
2566 cblk->tagmsg = SIMPLE_QUEUE_TAG; /* Do simple tag only */
2567 } else {
2568 cblk->tagmsg = 0; /* No tag support */
2569 }
2570
2571 /* todo handle map_sg error */
2572 nseg = scsi_dma_map(cmnd);
2573 BUG_ON(nseg < 0);
2574 if (nseg) {
2575 dma_addr = dma_map_single(&host->pci_dev->dev, &cblk->sglist[0],
2576 sizeof(struct sg_entry) * TOTAL_SG_ENTRY,
2577 DMA_BIDIRECTIONAL);
2578 cblk->bufptr = (u32)dma_addr;
2579 initio_priv(cmnd)->sglist_dma_addr = dma_addr;
2580
2581 cblk->sglen = nseg;
2582
2583 cblk->flags |= SCF_SG; /* Turn on SG list flag */
2584 total_len = 0;
2585 sg = &cblk->sglist[0];
2586 scsi_for_each_sg(cmnd, sglist, cblk->sglen, i) {
2587 sg->data = cpu_to_le32((u32)sg_dma_address(sglist));
2588 sg->len = cpu_to_le32((u32)sg_dma_len(sglist));
2589 total_len += sg_dma_len(sglist);
2590 ++sg;
2591 }
2592
2593 cblk->buflen = (scsi_bufflen(cmnd) > total_len) ?
2594 total_len : scsi_bufflen(cmnd);
2595 } else { /* No data transfer required */
2596 cblk->buflen = 0;
2597 cblk->sglen = 0;
2598 }
2599}
2600
2601/**
2602 * i91u_queuecommand_lck - Queue a new command if possible
2603 * @cmd: SCSI command block from the mid layer
2604 *
2605 * Attempts to queue a new command with the host adapter. Will return
2606 * zero if successful or indicate a host busy condition if not (which
2607 * will cause the mid layer to call us again later with the command)
2608 */
2609static int i91u_queuecommand_lck(struct scsi_cmnd *cmd)
2610{
2611 struct initio_host *host = (struct initio_host *) cmd->device->host->hostdata;
2612 struct scsi_ctrl_blk *cmnd;
2613
2614 cmnd = initio_alloc_scb(host);
2615 if (!cmnd)
2616 return SCSI_MLQUEUE_HOST_BUSY;
2617
2618 initio_build_scb(host, cmnd, cmd);
2619 initio_exec_scb(host, cmnd);
2620 return 0;
2621}
2622
2623static DEF_SCSI_QCMD(i91u_queuecommand)
2624
2625/**
2626 * i91u_bus_reset - reset the SCSI bus
2627 * @cmnd: Command block we want to trigger the reset for
2628 *
2629 * Initiate a SCSI bus reset sequence
2630 */
2631
2632static int i91u_bus_reset(struct scsi_cmnd * cmnd)
2633{
2634 struct initio_host *host;
2635
2636 host = (struct initio_host *) cmnd->device->host->hostdata;
2637
2638 spin_lock_irq(cmnd->device->host->host_lock);
2639 initio_reset_scsi(host, 0);
2640 spin_unlock_irq(cmnd->device->host->host_lock);
2641
2642 return SUCCESS;
2643}
2644
2645/**
2646 * i91u_biosparam - return the "logical geometry
2647 * @sdev: SCSI device
2648 * @dev: Matching block device
2649 * @capacity: Sector size of drive
2650 * @info_array: Return space for BIOS geometry
2651 *
2652 * Map the device geometry in a manner compatible with the host
2653 * controller BIOS behaviour.
2654 *
2655 * FIXME: limited to 2^32 sector devices.
2656 */
2657
2658static int i91u_biosparam(struct scsi_device *sdev, struct block_device *dev,
2659 sector_t capacity, int *info_array)
2660{
2661 struct initio_host *host; /* Point to Host adapter control block */
2662 struct target_control *tc;
2663
2664 host = (struct initio_host *) sdev->host->hostdata;
2665 tc = &host->targets[sdev->id];
2666
2667 if (tc->heads) {
2668 info_array[0] = tc->heads;
2669 info_array[1] = tc->sectors;
2670 info_array[2] = (unsigned long)capacity / tc->heads / tc->sectors;
2671 } else {
2672 if (tc->drv_flags & TCF_DRV_255_63) {
2673 info_array[0] = 255;
2674 info_array[1] = 63;
2675 info_array[2] = (unsigned long)capacity / 255 / 63;
2676 } else {
2677 info_array[0] = 64;
2678 info_array[1] = 32;
2679 info_array[2] = (unsigned long)capacity >> 11;
2680 }
2681 }
2682
2683#if defined(DEBUG_BIOSPARAM)
2684 if (i91u_debug & debug_biosparam) {
2685 printk("bios geometry: head=%d, sec=%d, cyl=%d\n",
2686 info_array[0], info_array[1], info_array[2]);
2687 printk("WARNING: check, if the bios geometry is correct.\n");
2688 }
2689#endif
2690
2691 return 0;
2692}
2693
2694/**
2695 * i91u_unmap_scb - Unmap a command
2696 * @pci_dev: PCI device the command is for
2697 * @cmnd: The command itself
2698 *
2699 * Unmap any PCI mapping/IOMMU resources allocated when the command
2700 * was mapped originally as part of initio_build_scb
2701 */
2702
2703static void i91u_unmap_scb(struct pci_dev *pci_dev, struct scsi_cmnd *cmnd)
2704{
2705 /* auto sense buffer */
2706 if (initio_priv(cmnd)->sense_dma_addr) {
2707 dma_unmap_single(&pci_dev->dev,
2708 initio_priv(cmnd)->sense_dma_addr,
2709 SENSE_SIZE, DMA_FROM_DEVICE);
2710 initio_priv(cmnd)->sense_dma_addr = 0;
2711 }
2712
2713 /* request buffer */
2714 if (scsi_sg_count(cmnd)) {
2715 dma_unmap_single(&pci_dev->dev,
2716 initio_priv(cmnd)->sglist_dma_addr,
2717 sizeof(struct sg_entry) * TOTAL_SG_ENTRY,
2718 DMA_BIDIRECTIONAL);
2719
2720 scsi_dma_unmap(cmnd);
2721 }
2722}
2723
2724/*
2725 * i91uSCBPost - SCSI callback
2726 *
2727 * This is callback routine be called when tulip finish one
2728 * SCSI command.
2729 */
2730
2731static void i91uSCBPost(u8 * host_mem, u8 * cblk_mem)
2732{
2733 struct scsi_cmnd *cmnd; /* Pointer to SCSI request block */
2734 struct initio_host *host;
2735 struct scsi_ctrl_blk *cblk;
2736
2737 host = (struct initio_host *) host_mem;
2738 cblk = (struct scsi_ctrl_blk *) cblk_mem;
2739 if ((cmnd = cblk->srb) == NULL) {
2740 printk(KERN_ERR "i91uSCBPost: SRB pointer is empty\n");
2741 WARN_ON(1);
2742 initio_release_scb(host, cblk); /* Release SCB for current channel */
2743 return;
2744 }
2745
2746 /*
2747 * Remap the firmware error status into a mid layer one
2748 */
2749 switch (cblk->hastat) {
2750 case 0x0:
2751 case 0xa: /* Linked command complete without error and linked normally */
2752 case 0xb: /* Linked command complete without error interrupt generated */
2753 cblk->hastat = 0;
2754 break;
2755
2756 case 0x11: /* Selection time out-The initiator selection or target
2757 reselection was not complete within the SCSI Time out period */
2758 cblk->hastat = DID_TIME_OUT;
2759 break;
2760
2761 case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus
2762 phase sequence was requested by the target. The host adapter
2763 will generate a SCSI Reset Condition, notifying the host with
2764 a SCRD interrupt */
2765 cblk->hastat = DID_RESET;
2766 break;
2767
2768 case 0x1a: /* SCB Aborted. 07/21/98 */
2769 cblk->hastat = DID_ABORT;
2770 break;
2771
2772 case 0x12: /* Data overrun/underrun-The target attempted to transfer more data
2773 than was allocated by the Data Length field or the sum of the
2774 Scatter / Gather Data Length fields. */
2775 case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */
2776 case 0x16: /* Invalid SCB Operation Code. */
2777
2778 default:
2779 printk("ini9100u: %x %x\n", cblk->hastat, cblk->tastat);
2780 cblk->hastat = DID_ERROR; /* Couldn't find any better */
2781 break;
2782 }
2783
2784 cmnd->result = cblk->tastat | (cblk->hastat << 16);
2785 i91u_unmap_scb(host->pci_dev, cmnd);
2786 scsi_done(cmnd); /* Notify system DONE */
2787 initio_release_scb(host, cblk); /* Release SCB for current channel */
2788}
2789
2790static const struct scsi_host_template initio_template = {
2791 .proc_name = "INI9100U",
2792 .name = "Initio INI-9X00U/UW SCSI device driver",
2793 .queuecommand = i91u_queuecommand,
2794 .eh_bus_reset_handler = i91u_bus_reset,
2795 .bios_param = i91u_biosparam,
2796 .can_queue = MAX_TARGETS * i91u_MAXQUEUE,
2797 .this_id = 1,
2798 .sg_tablesize = SG_ALL,
2799 .cmd_size = sizeof(struct initio_cmd_priv),
2800};
2801
2802static int initio_probe_one(struct pci_dev *pdev,
2803 const struct pci_device_id *id)
2804{
2805 struct Scsi_Host *shost;
2806 struct initio_host *host;
2807 u32 reg;
2808 u16 bios_seg;
2809 struct scsi_ctrl_blk *scb, *tmp, *prev = NULL /* silence gcc */;
2810 int num_scb, i, error;
2811
2812 error = pci_enable_device(pdev);
2813 if (error)
2814 return error;
2815
2816 pci_read_config_dword(pdev, 0x44, (u32 *) & reg);
2817 bios_seg = (u16) (reg & 0xFF);
2818 if (((reg & 0xFF00) >> 8) == 0xFF)
2819 reg = 0;
2820 bios_seg = (bios_seg << 8) + ((u16) ((reg & 0xFF00) >> 8));
2821
2822 if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
2823 printk(KERN_WARNING "i91u: Could not set 32 bit DMA mask\n");
2824 error = -ENODEV;
2825 goto out_disable_device;
2826 }
2827 shost = scsi_host_alloc(&initio_template, sizeof(struct initio_host));
2828 if (!shost) {
2829 printk(KERN_WARNING "initio: Could not allocate host structure.\n");
2830 error = -ENOMEM;
2831 goto out_disable_device;
2832 }
2833 host = (struct initio_host *)shost->hostdata;
2834 memset(host, 0, sizeof(struct initio_host));
2835 host->addr = pci_resource_start(pdev, 0);
2836 host->bios_addr = bios_seg;
2837
2838 if (!request_region(host->addr, 256, "i91u")) {
2839 printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n", host->addr);
2840 error = -ENODEV;
2841 goto out_host_put;
2842 }
2843
2844 if (initio_tag_enable) /* 1.01i */
2845 num_scb = MAX_TARGETS * i91u_MAXQUEUE;
2846 else
2847 num_scb = MAX_TARGETS + 3; /* 1-tape, 1-CD_ROM, 1- extra */
2848
2849 for (; num_scb >= MAX_TARGETS + 3; num_scb--) {
2850 i = num_scb * sizeof(struct scsi_ctrl_blk);
2851 scb = kzalloc(i, GFP_KERNEL);
2852 if (scb)
2853 break;
2854 }
2855
2856 if (!scb) {
2857 printk(KERN_WARNING "initio: Cannot allocate SCB array.\n");
2858 error = -ENOMEM;
2859 goto out_release_region;
2860 }
2861
2862 host->pci_dev = pdev;
2863
2864 host->semaph = 1;
2865 spin_lock_init(&host->semaph_lock);
2866 host->num_scbs = num_scb;
2867 host->scb = scb;
2868 host->next_pending = scb;
2869 host->next_avail = scb;
2870 for (i = 0, tmp = scb; i < num_scb; i++, tmp++) {
2871 tmp->tagid = i;
2872 if (i != 0)
2873 prev->next = tmp;
2874 prev = tmp;
2875 }
2876 prev->next = NULL;
2877 host->scb_end = tmp;
2878 host->first_avail = scb;
2879 host->last_avail = prev;
2880 spin_lock_init(&host->avail_lock);
2881
2882 initio_init(host, phys_to_virt(((u32)bios_seg << 4)));
2883
2884 host->jsstatus0 = 0;
2885
2886 shost->io_port = host->addr;
2887 shost->n_io_port = 0xff;
2888 shost->can_queue = num_scb; /* 03/05/98 */
2889 shost->unique_id = host->addr;
2890 shost->max_id = host->max_tar;
2891 shost->max_lun = 32; /* 10/21/97 */
2892 shost->irq = pdev->irq;
2893 shost->this_id = host->scsi_id; /* Assign HCS index */
2894 shost->base = host->addr;
2895 shost->sg_tablesize = TOTAL_SG_ENTRY;
2896
2897 error = request_irq(pdev->irq, i91u_intr, IRQF_SHARED, "i91u", shost);
2898 if (error < 0) {
2899 printk(KERN_WARNING "initio: Unable to request IRQ %d\n", pdev->irq);
2900 goto out_free_scbs;
2901 }
2902
2903 pci_set_drvdata(pdev, shost);
2904
2905 error = scsi_add_host(shost, &pdev->dev);
2906 if (error)
2907 goto out_free_irq;
2908 scsi_scan_host(shost);
2909 return 0;
2910out_free_irq:
2911 free_irq(pdev->irq, shost);
2912out_free_scbs:
2913 kfree(host->scb);
2914out_release_region:
2915 release_region(host->addr, 256);
2916out_host_put:
2917 scsi_host_put(shost);
2918out_disable_device:
2919 pci_disable_device(pdev);
2920 return error;
2921}
2922
2923/**
2924 * initio_remove_one - control shutdown
2925 * @pdev: PCI device being released
2926 *
2927 * Release the resources assigned to this adapter after it has
2928 * finished being used.
2929 */
2930
2931static void initio_remove_one(struct pci_dev *pdev)
2932{
2933 struct Scsi_Host *host = pci_get_drvdata(pdev);
2934 struct initio_host *s = (struct initio_host *)host->hostdata;
2935 scsi_remove_host(host);
2936 free_irq(pdev->irq, host);
2937 release_region(s->addr, 256);
2938 scsi_host_put(host);
2939 pci_disable_device(pdev);
2940}
2941
2942MODULE_LICENSE("GPL");
2943
2944static struct pci_device_id initio_pci_tbl[] = {
2945 {PCI_VENDOR_ID_INIT, 0x9500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2946 {PCI_VENDOR_ID_INIT, 0x9400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2947 {PCI_VENDOR_ID_INIT, 0x9401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2948 {PCI_VENDOR_ID_INIT, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2949 {PCI_VENDOR_ID_DOMEX, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2950 {0,}
2951};
2952MODULE_DEVICE_TABLE(pci, initio_pci_tbl);
2953
2954static struct pci_driver initio_pci_driver = {
2955 .name = "initio",
2956 .id_table = initio_pci_tbl,
2957 .probe = initio_probe_one,
2958 .remove = initio_remove_one,
2959};
2960module_pci_driver(initio_pci_driver);
2961
2962MODULE_DESCRIPTION("Initio INI-9X00U/UW SCSI device driver");
2963MODULE_AUTHOR("Initio Corporation");
2964MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/**************************************************************************
3 * Initio 9100 device driver for Linux.
4 *
5 * Copyright (c) 1994-1998 Initio Corporation
6 * Copyright (c) 1998 Bas Vermeulen <bvermeul@blackstar.xs4all.nl>
7 * Copyright (c) 2004 Christoph Hellwig <hch@lst.de>
8 * Copyright (c) 2007 Red Hat
9 *
10 *************************************************************************
11 *
12 * DESCRIPTION:
13 *
14 * This is the Linux low-level SCSI driver for Initio INI-9X00U/UW SCSI host
15 * adapters
16 *
17 * 08/06/97 hc - v1.01h
18 * - Support inic-940 and inic-935
19 * 09/26/97 hc - v1.01i
20 * - Make correction from J.W. Schultz suggestion
21 * 10/13/97 hc - Support reset function
22 * 10/21/97 hc - v1.01j
23 * - Support 32 LUN (SCSI 3)
24 * 01/14/98 hc - v1.01k
25 * - Fix memory allocation problem
26 * 03/04/98 hc - v1.01l
27 * - Fix tape rewind which will hang the system problem
28 * - Set can_queue to initio_num_scb
29 * 06/25/98 hc - v1.01m
30 * - Get it work for kernel version >= 2.1.75
31 * - Dynamic assign SCSI bus reset holding time in initio_init()
32 * 07/02/98 hc - v1.01n
33 * - Support 0002134A
34 * 08/07/98 hc - v1.01o
35 * - Change the initio_abort_srb routine to use scsi_done. <01>
36 * 09/07/98 hl - v1.02
37 * - Change the INI9100U define and proc_dir_entry to
38 * reflect the newer Kernel 2.1.118, but the v1.o1o
39 * should work with Kernel 2.1.118.
40 * 09/20/98 wh - v1.02a
41 * - Support Abort command.
42 * - Handle reset routine.
43 * 09/21/98 hl - v1.03
44 * - remove comments.
45 * 12/09/98 bv - v1.03a
46 * - Removed unused code
47 * 12/13/98 bv - v1.03b
48 * - Remove cli() locking for kernels >= 2.1.95. This uses
49 * spinlocks to serialize access to the pSRB_head and
50 * pSRB_tail members of the HCS structure.
51 * 09/01/99 bv - v1.03d
52 * - Fixed a deadlock problem in SMP.
53 * 21/01/99 bv - v1.03e
54 * - Add support for the Domex 3192U PCI SCSI
55 * This is a slightly modified patch by
56 * Brian Macy <bmacy@sunshinecomputing.com>
57 * 22/02/99 bv - v1.03f
58 * - Didn't detect the INIC-950 in 2.0.x correctly.
59 * Now fixed.
60 * 05/07/99 bv - v1.03g
61 * - Changed the assumption that HZ = 100
62 * 10/17/03 mc - v1.04
63 * - added new DMA API support
64 * 06/01/04 jmd - v1.04a
65 * - Re-add reset_bus support
66 **************************************************************************/
67
68#include <linux/module.h>
69#include <linux/errno.h>
70#include <linux/delay.h>
71#include <linux/pci.h>
72#include <linux/init.h>
73#include <linux/blkdev.h>
74#include <linux/spinlock.h>
75#include <linux/stat.h>
76#include <linux/kernel.h>
77#include <linux/proc_fs.h>
78#include <linux/string.h>
79#include <linux/interrupt.h>
80#include <linux/ioport.h>
81#include <linux/slab.h>
82#include <linux/jiffies.h>
83#include <linux/dma-mapping.h>
84#include <asm/io.h>
85
86#include <scsi/scsi.h>
87#include <scsi/scsi_cmnd.h>
88#include <scsi/scsi_device.h>
89#include <scsi/scsi_host.h>
90#include <scsi/scsi_tcq.h>
91
92#include "initio.h"
93
94#define SENSE_SIZE 14
95
96#define i91u_MAXQUEUE 2
97#define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.04a"
98
99#ifdef DEBUG_i91u
100static unsigned int i91u_debug = DEBUG_DEFAULT;
101#endif
102
103static int initio_tag_enable = 1;
104
105#ifdef DEBUG_i91u
106static int setup_debug = 0;
107#endif
108
109static void i91uSCBPost(u8 * pHcb, u8 * pScb);
110
111#define DEBUG_INTERRUPT 0
112#define DEBUG_QUEUE 0
113#define DEBUG_STATE 0
114#define INT_DISC 0
115
116/*--- forward references ---*/
117static struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun);
118static struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host);
119
120static int tulip_main(struct initio_host * host);
121
122static int initio_next_state(struct initio_host * host);
123static int initio_state_1(struct initio_host * host);
124static int initio_state_2(struct initio_host * host);
125static int initio_state_3(struct initio_host * host);
126static int initio_state_4(struct initio_host * host);
127static int initio_state_5(struct initio_host * host);
128static int initio_state_6(struct initio_host * host);
129static int initio_state_7(struct initio_host * host);
130static int initio_xfer_data_in(struct initio_host * host);
131static int initio_xfer_data_out(struct initio_host * host);
132static int initio_xpad_in(struct initio_host * host);
133static int initio_xpad_out(struct initio_host * host);
134static int initio_status_msg(struct initio_host * host);
135
136static int initio_msgin(struct initio_host * host);
137static int initio_msgin_sync(struct initio_host * host);
138static int initio_msgin_accept(struct initio_host * host);
139static int initio_msgout_reject(struct initio_host * host);
140static int initio_msgin_extend(struct initio_host * host);
141
142static int initio_msgout_ide(struct initio_host * host);
143static int initio_msgout_abort_targ(struct initio_host * host);
144static int initio_msgout_abort_tag(struct initio_host * host);
145
146static int initio_bus_device_reset(struct initio_host * host);
147static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb);
148static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb);
149static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb);
150static int int_initio_busfree(struct initio_host * host);
151static int int_initio_scsi_rst(struct initio_host * host);
152static int int_initio_bad_seq(struct initio_host * host);
153static int int_initio_resel(struct initio_host * host);
154static int initio_sync_done(struct initio_host * host);
155static int wdtr_done(struct initio_host * host);
156static int wait_tulip(struct initio_host * host);
157static int initio_wait_done_disc(struct initio_host * host);
158static int initio_wait_disc(struct initio_host * host);
159static void tulip_scsi(struct initio_host * host);
160static int initio_post_scsi_rst(struct initio_host * host);
161
162static void initio_se2_ew_en(unsigned long base);
163static void initio_se2_ew_ds(unsigned long base);
164static int initio_se2_rd_all(unsigned long base);
165static void initio_se2_update_all(unsigned long base); /* setup default pattern */
166static void initio_read_eeprom(unsigned long base);
167
168/* ---- INTERNAL VARIABLES ---- */
169
170static NVRAM i91unvram;
171static NVRAM *i91unvramp;
172
173static u8 i91udftNvRam[64] =
174{
175 /*----------- header -----------*/
176 0x25, 0xc9, /* Signature */
177 0x40, /* Size */
178 0x01, /* Revision */
179 /* -- Host Adapter Structure -- */
180 0x95, /* ModelByte0 */
181 0x00, /* ModelByte1 */
182 0x00, /* ModelInfo */
183 0x01, /* NumOfCh */
184 NBC1_DEFAULT, /* BIOSConfig1 */
185 0, /* BIOSConfig2 */
186 0, /* HAConfig1 */
187 0, /* HAConfig2 */
188 /* SCSI channel 0 and target Structure */
189 7, /* SCSIid */
190 NCC1_DEFAULT, /* SCSIconfig1 */
191 0, /* SCSIconfig2 */
192 0x10, /* NumSCSItarget */
193
194 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
195 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
196 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
197 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
198
199 /* SCSI channel 1 and target Structure */
200 7, /* SCSIid */
201 NCC1_DEFAULT, /* SCSIconfig1 */
202 0, /* SCSIconfig2 */
203 0x10, /* NumSCSItarget */
204
205 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
206 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
207 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
208 NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT, NTC_DEFAULT,
209 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
210 0, 0}; /* - CheckSum - */
211
212
213static u8 initio_rate_tbl[8] = /* fast 20 */
214{
215 /* nanosecond divide by 4 */
216 12, /* 50ns, 20M */
217 18, /* 75ns, 13.3M */
218 25, /* 100ns, 10M */
219 31, /* 125ns, 8M */
220 37, /* 150ns, 6.6M */
221 43, /* 175ns, 5.7M */
222 50, /* 200ns, 5M */
223 62 /* 250ns, 4M */
224};
225
226static void initio_do_pause(unsigned amount)
227{
228 /* Pause for amount jiffies */
229 unsigned long the_time = jiffies + amount;
230
231 while (time_before_eq(jiffies, the_time))
232 cpu_relax();
233}
234
235/*-- forward reference --*/
236
237/******************************************************************
238 Input: instruction for Serial E2PROM
239
240 EX: se2_rd(0 call se2_instr() to send address and read command
241
242 StartBit OP_Code Address Data
243 --------- -------- ------------------ -------
244 1 1 , 0 A5,A4,A3,A2,A1,A0 D15-D0
245
246 +-----------------------------------------------------
247 |
248 CS -----+
249 +--+ +--+ +--+ +--+ +--+
250 ^ | ^ | ^ | ^ | ^ |
251 | | | | | | | | | |
252 CLK -------+ +--+ +--+ +--+ +--+ +--
253 (leading edge trigger)
254
255 +--1-----1--+
256 | SB OP | OP A5 A4
257 DI ----+ +--0------------------
258 (address and cmd sent to nvram)
259
260 -------------------------------------------+
261 |
262 DO +---
263 (data sent from nvram)
264
265
266******************************************************************/
267
268/**
269 * initio_se2_instr - bitbang an instruction
270 * @base: Base of InitIO controller
271 * @instr: Instruction for serial E2PROM
272 *
273 * Bitbang an instruction out to the serial E2Prom
274 */
275
276static void initio_se2_instr(unsigned long base, u8 instr)
277{
278 int i;
279 u8 b;
280
281 outb(SE2CS | SE2DO, base + TUL_NVRAM); /* cs+start bit */
282 udelay(30);
283 outb(SE2CS | SE2CLK | SE2DO, base + TUL_NVRAM); /* +CLK */
284 udelay(30);
285
286 for (i = 0; i < 8; i++) {
287 if (instr & 0x80)
288 b = SE2CS | SE2DO; /* -CLK+dataBit */
289 else
290 b = SE2CS; /* -CLK */
291 outb(b, base + TUL_NVRAM);
292 udelay(30);
293 outb(b | SE2CLK, base + TUL_NVRAM); /* +CLK */
294 udelay(30);
295 instr <<= 1;
296 }
297 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
298 udelay(30);
299}
300
301
302/**
303 * initio_se2_ew_en - Enable erase/write
304 * @base: Base address of InitIO controller
305 *
306 * Enable erase/write state of serial EEPROM
307 */
308void initio_se2_ew_en(unsigned long base)
309{
310 initio_se2_instr(base, 0x30); /* EWEN */
311 outb(0, base + TUL_NVRAM); /* -CS */
312 udelay(30);
313}
314
315
316/**
317 * initio_se2_ew_ds - Disable erase/write
318 * @base: Base address of InitIO controller
319 *
320 * Disable erase/write state of serial EEPROM
321 */
322void initio_se2_ew_ds(unsigned long base)
323{
324 initio_se2_instr(base, 0); /* EWDS */
325 outb(0, base + TUL_NVRAM); /* -CS */
326 udelay(30);
327}
328
329
330/**
331 * initio_se2_rd - read E2PROM word
332 * @base: Base of InitIO controller
333 * @addr: Address of word in E2PROM
334 *
335 * Read a word from the NV E2PROM device
336 */
337static u16 initio_se2_rd(unsigned long base, u8 addr)
338{
339 u8 instr, rb;
340 u16 val = 0;
341 int i;
342
343 instr = (u8) (addr | 0x80);
344 initio_se2_instr(base, instr); /* READ INSTR */
345
346 for (i = 15; i >= 0; i--) {
347 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */
348 udelay(30);
349 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
350
351 /* sample data after the following edge of clock */
352 rb = inb(base + TUL_NVRAM);
353 rb &= SE2DI;
354 val += (rb << i);
355 udelay(30); /* 6/20/95 */
356 }
357
358 outb(0, base + TUL_NVRAM); /* no chip select */
359 udelay(30);
360 return val;
361}
362
363/**
364 * initio_se2_wr - read E2PROM word
365 * @base: Base of InitIO controller
366 * @addr: Address of word in E2PROM
367 * @val: Value to write
368 *
369 * Write a word to the NV E2PROM device. Used when recovering from
370 * a problem with the NV.
371 */
372static void initio_se2_wr(unsigned long base, u8 addr, u16 val)
373{
374 u8 rb;
375 u8 instr;
376 int i;
377
378 instr = (u8) (addr | 0x40);
379 initio_se2_instr(base, instr); /* WRITE INSTR */
380 for (i = 15; i >= 0; i--) {
381 if (val & 0x8000)
382 outb(SE2CS | SE2DO, base + TUL_NVRAM); /* -CLK+dataBit 1 */
383 else
384 outb(SE2CS, base + TUL_NVRAM); /* -CLK+dataBit 0 */
385 udelay(30);
386 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */
387 udelay(30);
388 val <<= 1;
389 }
390 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
391 udelay(30);
392 outb(0, base + TUL_NVRAM); /* -CS */
393 udelay(30);
394
395 outb(SE2CS, base + TUL_NVRAM); /* +CS */
396 udelay(30);
397
398 for (;;) {
399 outb(SE2CS | SE2CLK, base + TUL_NVRAM); /* +CLK */
400 udelay(30);
401 outb(SE2CS, base + TUL_NVRAM); /* -CLK */
402 udelay(30);
403 if ((rb = inb(base + TUL_NVRAM)) & SE2DI)
404 break; /* write complete */
405 }
406 outb(0, base + TUL_NVRAM); /* -CS */
407}
408
409/**
410 * initio_se2_rd_all - read hostadapter NV configuration
411 * @base: Base address of InitIO controller
412 *
413 * Reads the E2PROM data into main memory. Ensures that the checksum
414 * and header marker are valid. Returns 1 on success -1 on error.
415 */
416
417static int initio_se2_rd_all(unsigned long base)
418{
419 int i;
420 u16 chksum = 0;
421 u16 *np;
422
423 i91unvramp = &i91unvram;
424 np = (u16 *) i91unvramp;
425 for (i = 0; i < 32; i++)
426 *np++ = initio_se2_rd(base, i);
427
428 /* Is signature "ini" ok ? */
429 if (i91unvramp->NVM_Signature != INI_SIGNATURE)
430 return -1;
431 /* Is ckecksum ok ? */
432 np = (u16 *) i91unvramp;
433 for (i = 0; i < 31; i++)
434 chksum += *np++;
435 if (i91unvramp->NVM_CheckSum != chksum)
436 return -1;
437 return 1;
438}
439
440/**
441 * initio_se2_update_all - Update E2PROM
442 * @base: Base of InitIO controller
443 *
444 * Update the E2PROM by wrting any changes into the E2PROM
445 * chip, rewriting the checksum.
446 */
447static void initio_se2_update_all(unsigned long base)
448{ /* setup default pattern */
449 int i;
450 u16 chksum = 0;
451 u16 *np, *np1;
452
453 i91unvramp = &i91unvram;
454 /* Calculate checksum first */
455 np = (u16 *) i91udftNvRam;
456 for (i = 0; i < 31; i++)
457 chksum += *np++;
458 *np = chksum;
459 initio_se2_ew_en(base); /* Enable write */
460
461 np = (u16 *) i91udftNvRam;
462 np1 = (u16 *) i91unvramp;
463 for (i = 0; i < 32; i++, np++, np1++) {
464 if (*np != *np1)
465 initio_se2_wr(base, i, *np);
466 }
467 initio_se2_ew_ds(base); /* Disable write */
468}
469
470/**
471 * initio_read_eeprom - Retrieve configuration
472 * @base: Base of InitIO Host Adapter
473 *
474 * Retrieve the host adapter configuration data from E2Prom. If the
475 * data is invalid then the defaults are used and are also restored
476 * into the E2PROM. This forms the access point for the SCSI driver
477 * into the E2PROM layer, the other functions for the E2PROM are all
478 * internal use.
479 *
480 * Must be called single threaded, uses a shared global area.
481 */
482
483static void initio_read_eeprom(unsigned long base)
484{
485 u8 gctrl;
486
487 i91unvramp = &i91unvram;
488 /* Enable EEProm programming */
489 gctrl = inb(base + TUL_GCTRL);
490 outb(gctrl | TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL);
491 if (initio_se2_rd_all(base) != 1) {
492 initio_se2_update_all(base); /* setup default pattern */
493 initio_se2_rd_all(base); /* load again */
494 }
495 /* Disable EEProm programming */
496 gctrl = inb(base + TUL_GCTRL);
497 outb(gctrl & ~TUL_GCTRL_EEPROM_BIT, base + TUL_GCTRL);
498}
499
500/**
501 * initio_stop_bm - stop bus master
502 * @host: InitIO we are stopping
503 *
504 * Stop any pending DMA operation, aborting the DMA if necessary
505 */
506
507static void initio_stop_bm(struct initio_host * host)
508{
509
510 if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */
511 outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd);
512 /* wait Abort DMA xfer done */
513 while ((inb(host->addr + TUL_Int) & XABT) == 0)
514 cpu_relax();
515 }
516 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
517}
518
519/**
520 * initio_reset_scsi - Reset SCSI host controller
521 * @host: InitIO host to reset
522 * @seconds: Recovery time
523 *
524 * Perform a full reset of the SCSI subsystem.
525 */
526
527static int initio_reset_scsi(struct initio_host * host, int seconds)
528{
529 outb(TSC_RST_BUS, host->addr + TUL_SCtrl0);
530
531 while (!((host->jsint = inb(host->addr + TUL_SInt)) & TSS_SCSIRST_INT))
532 cpu_relax();
533
534 /* reset tulip chip */
535 outb(0, host->addr + TUL_SSignal);
536
537 /* Stall for a while, wait for target's firmware ready,make it 2 sec ! */
538 /* SONY 5200 tape drive won't work if only stall for 1 sec */
539 /* FIXME: this is a very long busy wait right now */
540 initio_do_pause(seconds * HZ);
541
542 inb(host->addr + TUL_SInt);
543 return SCSI_RESET_SUCCESS;
544}
545
546/**
547 * initio_init - set up an InitIO host adapter
548 * @host: InitIO host adapter
549 * @num_scbs: Number of SCBS
550 * @bios_addr: BIOS address
551 *
552 * Set up the host adapter and devices according to the configuration
553 * retrieved from the E2PROM.
554 *
555 * Locking: Calls E2PROM layer code which is not re-enterable so must
556 * run single threaded for now.
557 */
558
559static void initio_init(struct initio_host * host, u8 *bios_addr)
560{
561 int i;
562 u8 *flags;
563 u8 *heads;
564
565 /* Get E2Prom configuration */
566 initio_read_eeprom(host->addr);
567 if (i91unvramp->NVM_SCSIInfo[0].NVM_NumOfTarg == 8)
568 host->max_tar = 8;
569 else
570 host->max_tar = 16;
571
572 host->config = i91unvramp->NVM_SCSIInfo[0].NVM_ChConfig1;
573
574 host->scsi_id = i91unvramp->NVM_SCSIInfo[0].NVM_ChSCSIID;
575 host->idmask = ~(1 << host->scsi_id);
576
577#ifdef CHK_PARITY
578 /* Enable parity error response */
579 outb(inb(host->addr + TUL_PCMD) | 0x40, host->addr + TUL_PCMD);
580#endif
581
582 /* Mask all the interrupt */
583 outb(0x1F, host->addr + TUL_Mask);
584
585 initio_stop_bm(host);
586 /* --- Initialize the tulip --- */
587 outb(TSC_RST_CHIP, host->addr + TUL_SCtrl0);
588
589 /* program HBA's SCSI ID */
590 outb(host->scsi_id << 4, host->addr + TUL_SScsiId);
591
592 /* Enable Initiator Mode ,phase latch,alternate sync period mode,
593 disable SCSI reset */
594 if (host->config & HCC_EN_PAR)
595 host->sconf1 = (TSC_INITDEFAULT | TSC_EN_SCSI_PAR);
596 else
597 host->sconf1 = (TSC_INITDEFAULT);
598 outb(host->sconf1, host->addr + TUL_SConfig);
599
600 /* Enable HW reselect */
601 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1);
602
603 outb(0, host->addr + TUL_SPeriod);
604
605 /* selection time out = 250 ms */
606 outb(153, host->addr + TUL_STimeOut);
607
608 /* Enable SCSI terminator */
609 outb((host->config & (HCC_ACT_TERM1 | HCC_ACT_TERM2)),
610 host->addr + TUL_XCtrl);
611 outb(((host->config & HCC_AUTO_TERM) >> 4) |
612 (inb(host->addr + TUL_GCTRL1) & 0xFE),
613 host->addr + TUL_GCTRL1);
614
615 for (i = 0,
616 flags = & (i91unvramp->NVM_SCSIInfo[0].NVM_Targ0Config),
617 heads = bios_addr + 0x180;
618 i < host->max_tar;
619 i++, flags++) {
620 host->targets[i].flags = *flags & ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
621 if (host->targets[i].flags & TCF_EN_255)
622 host->targets[i].drv_flags = TCF_DRV_255_63;
623 else
624 host->targets[i].drv_flags = 0;
625 host->targets[i].js_period = 0;
626 host->targets[i].sconfig0 = host->sconf1;
627 host->targets[i].heads = *heads++;
628 if (host->targets[i].heads == 255)
629 host->targets[i].drv_flags = TCF_DRV_255_63;
630 else
631 host->targets[i].drv_flags = 0;
632 host->targets[i].sectors = *heads++;
633 host->targets[i].flags &= ~TCF_BUSY;
634 host->act_tags[i] = 0;
635 host->max_tags[i] = 0xFF;
636 } /* for */
637 printk("i91u: PCI Base=0x%04X, IRQ=%d, BIOS=0x%04X0, SCSI ID=%d\n",
638 host->addr, host->pci_dev->irq,
639 host->bios_addr, host->scsi_id);
640 /* Reset SCSI Bus */
641 if (host->config & HCC_SCSI_RESET) {
642 printk(KERN_INFO "i91u: Reset SCSI Bus ... \n");
643 initio_reset_scsi(host, 10);
644 }
645 outb(0x17, host->addr + TUL_SCFG1);
646 outb(0xE9, host->addr + TUL_SIntEnable);
647}
648
649/**
650 * initio_alloc_scb - Allocate an SCB
651 * @host: InitIO host we are allocating for
652 *
653 * Walk the SCB list for the controller and allocate a free SCB if
654 * one exists.
655 */
656static struct scsi_ctrl_blk *initio_alloc_scb(struct initio_host *host)
657{
658 struct scsi_ctrl_blk *scb;
659 unsigned long flags;
660
661 spin_lock_irqsave(&host->avail_lock, flags);
662 if ((scb = host->first_avail) != NULL) {
663#if DEBUG_QUEUE
664 printk("find scb at %p\n", scb);
665#endif
666 if ((host->first_avail = scb->next) == NULL)
667 host->last_avail = NULL;
668 scb->next = NULL;
669 scb->status = SCB_RENT;
670 }
671 spin_unlock_irqrestore(&host->avail_lock, flags);
672 return scb;
673}
674
675/**
676 * initio_release_scb - Release an SCB
677 * @host: InitIO host that owns the SCB
678 * @cmnd: SCB command block being returned
679 *
680 * Return an allocated SCB to the host free list
681 */
682
683static void initio_release_scb(struct initio_host * host, struct scsi_ctrl_blk * cmnd)
684{
685 unsigned long flags;
686
687#if DEBUG_QUEUE
688 printk("Release SCB %p; ", cmnd);
689#endif
690 spin_lock_irqsave(&(host->avail_lock), flags);
691 cmnd->srb = NULL;
692 cmnd->status = 0;
693 cmnd->next = NULL;
694 if (host->last_avail != NULL) {
695 host->last_avail->next = cmnd;
696 host->last_avail = cmnd;
697 } else {
698 host->first_avail = cmnd;
699 host->last_avail = cmnd;
700 }
701 spin_unlock_irqrestore(&(host->avail_lock), flags);
702}
703
704/***************************************************************************/
705static void initio_append_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
706{
707
708#if DEBUG_QUEUE
709 printk("Append pend SCB %p; ", scbp);
710#endif
711 scbp->status = SCB_PEND;
712 scbp->next = NULL;
713 if (host->last_pending != NULL) {
714 host->last_pending->next = scbp;
715 host->last_pending = scbp;
716 } else {
717 host->first_pending = scbp;
718 host->last_pending = scbp;
719 }
720}
721
722/***************************************************************************/
723static void initio_push_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
724{
725
726#if DEBUG_QUEUE
727 printk("Push pend SCB %p; ", scbp);
728#endif
729 scbp->status = SCB_PEND;
730 if ((scbp->next = host->first_pending) != NULL) {
731 host->first_pending = scbp;
732 } else {
733 host->first_pending = scbp;
734 host->last_pending = scbp;
735 }
736}
737
738static struct scsi_ctrl_blk *initio_find_first_pend_scb(struct initio_host * host)
739{
740 struct scsi_ctrl_blk *first;
741
742
743 first = host->first_pending;
744 while (first != NULL) {
745 if (first->opcode != ExecSCSI)
746 return first;
747 if (first->tagmsg == 0) {
748 if ((host->act_tags[first->target] == 0) &&
749 !(host->targets[first->target].flags & TCF_BUSY))
750 return first;
751 } else {
752 if ((host->act_tags[first->target] >=
753 host->max_tags[first->target]) |
754 (host->targets[first->target].flags & TCF_BUSY)) {
755 first = first->next;
756 continue;
757 }
758 return first;
759 }
760 first = first->next;
761 }
762 return first;
763}
764
765static void initio_unlink_pend_scb(struct initio_host * host, struct scsi_ctrl_blk * scb)
766{
767 struct scsi_ctrl_blk *tmp, *prev;
768
769#if DEBUG_QUEUE
770 printk("unlink pend SCB %p; ", scb);
771#endif
772
773 prev = tmp = host->first_pending;
774 while (tmp != NULL) {
775 if (scb == tmp) { /* Unlink this SCB */
776 if (tmp == host->first_pending) {
777 if ((host->first_pending = tmp->next) == NULL)
778 host->last_pending = NULL;
779 } else {
780 prev->next = tmp->next;
781 if (tmp == host->last_pending)
782 host->last_pending = prev;
783 }
784 tmp->next = NULL;
785 break;
786 }
787 prev = tmp;
788 tmp = tmp->next;
789 }
790}
791
792static void initio_append_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
793{
794
795#if DEBUG_QUEUE
796 printk("append busy SCB %p; ", scbp);
797#endif
798 if (scbp->tagmsg)
799 host->act_tags[scbp->target]++;
800 else
801 host->targets[scbp->target].flags |= TCF_BUSY;
802 scbp->status = SCB_BUSY;
803 scbp->next = NULL;
804 if (host->last_busy != NULL) {
805 host->last_busy->next = scbp;
806 host->last_busy = scbp;
807 } else {
808 host->first_busy = scbp;
809 host->last_busy = scbp;
810 }
811}
812
813/***************************************************************************/
814static struct scsi_ctrl_blk *initio_pop_busy_scb(struct initio_host * host)
815{
816 struct scsi_ctrl_blk *tmp;
817
818
819 if ((tmp = host->first_busy) != NULL) {
820 if ((host->first_busy = tmp->next) == NULL)
821 host->last_busy = NULL;
822 tmp->next = NULL;
823 if (tmp->tagmsg)
824 host->act_tags[tmp->target]--;
825 else
826 host->targets[tmp->target].flags &= ~TCF_BUSY;
827 }
828#if DEBUG_QUEUE
829 printk("Pop busy SCB %p; ", tmp);
830#endif
831 return tmp;
832}
833
834/***************************************************************************/
835static void initio_unlink_busy_scb(struct initio_host * host, struct scsi_ctrl_blk * scb)
836{
837 struct scsi_ctrl_blk *tmp, *prev;
838
839#if DEBUG_QUEUE
840 printk("unlink busy SCB %p; ", scb);
841#endif
842
843 prev = tmp = host->first_busy;
844 while (tmp != NULL) {
845 if (scb == tmp) { /* Unlink this SCB */
846 if (tmp == host->first_busy) {
847 if ((host->first_busy = tmp->next) == NULL)
848 host->last_busy = NULL;
849 } else {
850 prev->next = tmp->next;
851 if (tmp == host->last_busy)
852 host->last_busy = prev;
853 }
854 tmp->next = NULL;
855 if (tmp->tagmsg)
856 host->act_tags[tmp->target]--;
857 else
858 host->targets[tmp->target].flags &= ~TCF_BUSY;
859 break;
860 }
861 prev = tmp;
862 tmp = tmp->next;
863 }
864 return;
865}
866
867struct scsi_ctrl_blk *initio_find_busy_scb(struct initio_host * host, u16 tarlun)
868{
869 struct scsi_ctrl_blk *tmp, *prev;
870 u16 scbp_tarlun;
871
872
873 prev = tmp = host->first_busy;
874 while (tmp != NULL) {
875 scbp_tarlun = (tmp->lun << 8) | (tmp->target);
876 if (scbp_tarlun == tarlun) { /* Unlink this SCB */
877 break;
878 }
879 prev = tmp;
880 tmp = tmp->next;
881 }
882#if DEBUG_QUEUE
883 printk("find busy SCB %p; ", tmp);
884#endif
885 return tmp;
886}
887
888static void initio_append_done_scb(struct initio_host * host, struct scsi_ctrl_blk * scbp)
889{
890#if DEBUG_QUEUE
891 printk("append done SCB %p; ", scbp);
892#endif
893
894 scbp->status = SCB_DONE;
895 scbp->next = NULL;
896 if (host->last_done != NULL) {
897 host->last_done->next = scbp;
898 host->last_done = scbp;
899 } else {
900 host->first_done = scbp;
901 host->last_done = scbp;
902 }
903}
904
905struct scsi_ctrl_blk *initio_find_done_scb(struct initio_host * host)
906{
907 struct scsi_ctrl_blk *tmp;
908
909 if ((tmp = host->first_done) != NULL) {
910 if ((host->first_done = tmp->next) == NULL)
911 host->last_done = NULL;
912 tmp->next = NULL;
913 }
914#if DEBUG_QUEUE
915 printk("find done SCB %p; ",tmp);
916#endif
917 return tmp;
918}
919
920static int initio_abort_srb(struct initio_host * host, struct scsi_cmnd *srbp)
921{
922 unsigned long flags;
923 struct scsi_ctrl_blk *tmp, *prev;
924
925 spin_lock_irqsave(&host->semaph_lock, flags);
926
927 if ((host->semaph == 0) && (host->active == NULL)) {
928 /* disable Jasmin SCSI Int */
929 outb(0x1F, host->addr + TUL_Mask);
930 spin_unlock_irqrestore(&host->semaph_lock, flags);
931 /* FIXME: synchronize_irq needed ? */
932 tulip_main(host);
933 spin_lock_irqsave(&host->semaph_lock, flags);
934 host->semaph = 1;
935 outb(0x0F, host->addr + TUL_Mask);
936 spin_unlock_irqrestore(&host->semaph_lock, flags);
937 return SCSI_ABORT_SNOOZE;
938 }
939 prev = tmp = host->first_pending; /* Check Pend queue */
940 while (tmp != NULL) {
941 /* 07/27/98 */
942 if (tmp->srb == srbp) {
943 if (tmp == host->active) {
944 spin_unlock_irqrestore(&host->semaph_lock, flags);
945 return SCSI_ABORT_BUSY;
946 } else if (tmp == host->first_pending) {
947 if ((host->first_pending = tmp->next) == NULL)
948 host->last_pending = NULL;
949 } else {
950 prev->next = tmp->next;
951 if (tmp == host->last_pending)
952 host->last_pending = prev;
953 }
954 tmp->hastat = HOST_ABORTED;
955 tmp->flags |= SCF_DONE;
956 if (tmp->flags & SCF_POST)
957 (*tmp->post) ((u8 *) host, (u8 *) tmp);
958 spin_unlock_irqrestore(&host->semaph_lock, flags);
959 return SCSI_ABORT_SUCCESS;
960 }
961 prev = tmp;
962 tmp = tmp->next;
963 }
964
965 prev = tmp = host->first_busy; /* Check Busy queue */
966 while (tmp != NULL) {
967 if (tmp->srb == srbp) {
968 if (tmp == host->active) {
969 spin_unlock_irqrestore(&host->semaph_lock, flags);
970 return SCSI_ABORT_BUSY;
971 } else if (tmp->tagmsg == 0) {
972 spin_unlock_irqrestore(&host->semaph_lock, flags);
973 return SCSI_ABORT_BUSY;
974 } else {
975 host->act_tags[tmp->target]--;
976 if (tmp == host->first_busy) {
977 if ((host->first_busy = tmp->next) == NULL)
978 host->last_busy = NULL;
979 } else {
980 prev->next = tmp->next;
981 if (tmp == host->last_busy)
982 host->last_busy = prev;
983 }
984 tmp->next = NULL;
985
986
987 tmp->hastat = HOST_ABORTED;
988 tmp->flags |= SCF_DONE;
989 if (tmp->flags & SCF_POST)
990 (*tmp->post) ((u8 *) host, (u8 *) tmp);
991 spin_unlock_irqrestore(&host->semaph_lock, flags);
992 return SCSI_ABORT_SUCCESS;
993 }
994 }
995 prev = tmp;
996 tmp = tmp->next;
997 }
998 spin_unlock_irqrestore(&host->semaph_lock, flags);
999 return SCSI_ABORT_NOT_RUNNING;
1000}
1001
1002/***************************************************************************/
1003static int initio_bad_seq(struct initio_host * host)
1004{
1005 struct scsi_ctrl_blk *scb;
1006
1007 printk("initio_bad_seg c=%d\n", host->index);
1008
1009 if ((scb = host->active) != NULL) {
1010 initio_unlink_busy_scb(host, scb);
1011 scb->hastat = HOST_BAD_PHAS;
1012 scb->tastat = 0;
1013 initio_append_done_scb(host, scb);
1014 }
1015 initio_stop_bm(host);
1016 initio_reset_scsi(host, 8); /* 7/29/98 */
1017 return initio_post_scsi_rst(host);
1018}
1019
1020
1021/************************************************************************/
1022static void initio_exec_scb(struct initio_host * host, struct scsi_ctrl_blk * scb)
1023{
1024 unsigned long flags;
1025
1026 scb->mode = 0;
1027
1028 scb->sgidx = 0;
1029 scb->sgmax = scb->sglen;
1030
1031 spin_lock_irqsave(&host->semaph_lock, flags);
1032
1033 initio_append_pend_scb(host, scb); /* Append this SCB to Pending queue */
1034
1035/* VVVVV 07/21/98 */
1036 if (host->semaph == 1) {
1037 /* Disable Jasmin SCSI Int */
1038 outb(0x1F, host->addr + TUL_Mask);
1039 host->semaph = 0;
1040 spin_unlock_irqrestore(&host->semaph_lock, flags);
1041
1042 tulip_main(host);
1043
1044 spin_lock_irqsave(&host->semaph_lock, flags);
1045 host->semaph = 1;
1046 outb(0x0F, host->addr + TUL_Mask);
1047 }
1048 spin_unlock_irqrestore(&host->semaph_lock, flags);
1049 return;
1050}
1051
1052/***************************************************************************/
1053static int initio_isr(struct initio_host * host)
1054{
1055 if (inb(host->addr + TUL_Int) & TSS_INT_PENDING) {
1056 if (host->semaph == 1) {
1057 outb(0x1F, host->addr + TUL_Mask);
1058 /* Disable Tulip SCSI Int */
1059 host->semaph = 0;
1060
1061 tulip_main(host);
1062
1063 host->semaph = 1;
1064 outb(0x0F, host->addr + TUL_Mask);
1065 return 1;
1066 }
1067 }
1068 return 0;
1069}
1070
1071static int tulip_main(struct initio_host * host)
1072{
1073 struct scsi_ctrl_blk *scb;
1074
1075 for (;;) {
1076 tulip_scsi(host); /* Call tulip_scsi */
1077
1078 /* Walk the list of completed SCBs */
1079 while ((scb = initio_find_done_scb(host)) != NULL) { /* find done entry */
1080 if (scb->tastat == INI_QUEUE_FULL) {
1081 host->max_tags[scb->target] =
1082 host->act_tags[scb->target] - 1;
1083 scb->tastat = 0;
1084 initio_append_pend_scb(host, scb);
1085 continue;
1086 }
1087 if (!(scb->mode & SCM_RSENS)) { /* not in auto req. sense mode */
1088 if (scb->tastat == 2) {
1089
1090 /* clr sync. nego flag */
1091
1092 if (scb->flags & SCF_SENSE) {
1093 u8 len;
1094 len = scb->senselen;
1095 if (len == 0)
1096 len = 1;
1097 scb->buflen = scb->senselen;
1098 scb->bufptr = scb->senseptr;
1099 scb->flags &= ~(SCF_SG | SCF_DIR); /* for xfer_data_in */
1100 /* so, we won't report wrong direction in xfer_data_in,
1101 and won't report HOST_DO_DU in state_6 */
1102 scb->mode = SCM_RSENS;
1103 scb->ident &= 0xBF; /* Disable Disconnect */
1104 scb->tagmsg = 0;
1105 scb->tastat = 0;
1106 scb->cdblen = 6;
1107 scb->cdb[0] = SCSICMD_RequestSense;
1108 scb->cdb[1] = 0;
1109 scb->cdb[2] = 0;
1110 scb->cdb[3] = 0;
1111 scb->cdb[4] = len;
1112 scb->cdb[5] = 0;
1113 initio_push_pend_scb(host, scb);
1114 break;
1115 }
1116 }
1117 } else { /* in request sense mode */
1118
1119 if (scb->tastat == 2) { /* check contition status again after sending
1120 requset sense cmd 0x3 */
1121 scb->hastat = HOST_BAD_PHAS;
1122 }
1123 scb->tastat = 2;
1124 }
1125 scb->flags |= SCF_DONE;
1126 if (scb->flags & SCF_POST) {
1127 /* FIXME: only one post method and lose casts */
1128 (*scb->post) ((u8 *) host, (u8 *) scb);
1129 }
1130 } /* while */
1131 /* find_active: */
1132 if (inb(host->addr + TUL_SStatus0) & TSS_INT_PENDING)
1133 continue;
1134 if (host->active) /* return to OS and wait for xfer_done_ISR/Selected_ISR */
1135 return 1; /* return to OS, enable interrupt */
1136 /* Check pending SCB */
1137 if (initio_find_first_pend_scb(host) == NULL)
1138 return 1; /* return to OS, enable interrupt */
1139 } /* End of for loop */
1140 /* statement won't reach here */
1141}
1142
1143static void tulip_scsi(struct initio_host * host)
1144{
1145 struct scsi_ctrl_blk *scb;
1146 struct target_control *active_tc;
1147
1148 /* make sure to service interrupt asap */
1149 if ((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING) {
1150 host->phase = host->jsstatus0 & TSS_PH_MASK;
1151 host->jsstatus1 = inb(host->addr + TUL_SStatus1);
1152 host->jsint = inb(host->addr + TUL_SInt);
1153 if (host->jsint & TSS_SCSIRST_INT) { /* SCSI bus reset detected */
1154 int_initio_scsi_rst(host);
1155 return;
1156 }
1157 if (host->jsint & TSS_RESEL_INT) { /* if selected/reselected interrupt */
1158 if (int_initio_resel(host) == 0)
1159 initio_next_state(host);
1160 return;
1161 }
1162 if (host->jsint & TSS_SEL_TIMEOUT) {
1163 int_initio_busfree(host);
1164 return;
1165 }
1166 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
1167 int_initio_busfree(host); /* unexpected bus free or sel timeout */
1168 return;
1169 }
1170 if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV)) { /* func complete or Bus service */
1171 if ((scb = host->active) != NULL)
1172 initio_next_state(host);
1173 return;
1174 }
1175 }
1176 if (host->active != NULL)
1177 return;
1178
1179 if ((scb = initio_find_first_pend_scb(host)) == NULL)
1180 return;
1181
1182 /* program HBA's SCSI ID & target SCSI ID */
1183 outb((host->scsi_id << 4) | (scb->target & 0x0F),
1184 host->addr + TUL_SScsiId);
1185 if (scb->opcode == ExecSCSI) {
1186 active_tc = &host->targets[scb->target];
1187
1188 if (scb->tagmsg)
1189 active_tc->drv_flags |= TCF_DRV_EN_TAG;
1190 else
1191 active_tc->drv_flags &= ~TCF_DRV_EN_TAG;
1192
1193 outb(active_tc->js_period, host->addr + TUL_SPeriod);
1194 if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) { /* do wdtr negotiation */
1195 initio_select_atn_stop(host, scb);
1196 } else {
1197 if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) { /* do sync negotiation */
1198 initio_select_atn_stop(host, scb);
1199 } else {
1200 if (scb->tagmsg)
1201 initio_select_atn3(host, scb);
1202 else
1203 initio_select_atn(host, scb);
1204 }
1205 }
1206 if (scb->flags & SCF_POLL) {
1207 while (wait_tulip(host) != -1) {
1208 if (initio_next_state(host) == -1)
1209 break;
1210 }
1211 }
1212 } else if (scb->opcode == BusDevRst) {
1213 initio_select_atn_stop(host, scb);
1214 scb->next_state = 8;
1215 if (scb->flags & SCF_POLL) {
1216 while (wait_tulip(host) != -1) {
1217 if (initio_next_state(host) == -1)
1218 break;
1219 }
1220 }
1221 } else if (scb->opcode == AbortCmd) {
1222 if (initio_abort_srb(host, scb->srb) != 0) {
1223 initio_unlink_pend_scb(host, scb);
1224 initio_release_scb(host, scb);
1225 } else {
1226 scb->opcode = BusDevRst;
1227 initio_select_atn_stop(host, scb);
1228 scb->next_state = 8;
1229 }
1230 } else {
1231 initio_unlink_pend_scb(host, scb);
1232 scb->hastat = 0x16; /* bad command */
1233 initio_append_done_scb(host, scb);
1234 }
1235 return;
1236}
1237
1238/**
1239 * initio_next_state - Next SCSI state
1240 * @host: InitIO host we are processing
1241 *
1242 * Progress the active command block along the state machine
1243 * until we hit a state which we must wait for activity to occur.
1244 *
1245 * Returns zero or a negative code.
1246 */
1247
1248static int initio_next_state(struct initio_host * host)
1249{
1250 int next;
1251
1252 next = host->active->next_state;
1253 for (;;) {
1254 switch (next) {
1255 case 1:
1256 next = initio_state_1(host);
1257 break;
1258 case 2:
1259 next = initio_state_2(host);
1260 break;
1261 case 3:
1262 next = initio_state_3(host);
1263 break;
1264 case 4:
1265 next = initio_state_4(host);
1266 break;
1267 case 5:
1268 next = initio_state_5(host);
1269 break;
1270 case 6:
1271 next = initio_state_6(host);
1272 break;
1273 case 7:
1274 next = initio_state_7(host);
1275 break;
1276 case 8:
1277 return initio_bus_device_reset(host);
1278 default:
1279 return initio_bad_seq(host);
1280 }
1281 if (next <= 0)
1282 return next;
1283 }
1284}
1285
1286
1287/**
1288 * initio_state_1 - SCSI state machine
1289 * @host: InitIO host we are controlling
1290 *
1291 * Perform SCSI state processing for Select/Attention/Stop
1292 */
1293
1294static int initio_state_1(struct initio_host * host)
1295{
1296 struct scsi_ctrl_blk *scb = host->active;
1297 struct target_control *active_tc = host->active_tc;
1298#if DEBUG_STATE
1299 printk("-s1-");
1300#endif
1301
1302 /* Move the SCB from pending to busy */
1303 initio_unlink_pend_scb(host, scb);
1304 initio_append_busy_scb(host, scb);
1305
1306 outb(active_tc->sconfig0, host->addr + TUL_SConfig );
1307 /* ATN on */
1308 if (host->phase == MSG_OUT) {
1309 outb(TSC_EN_BUS_IN | TSC_HW_RESELECT, host->addr + TUL_SCtrl1);
1310 outb(scb->ident, host->addr + TUL_SFifo);
1311
1312 if (scb->tagmsg) {
1313 outb(scb->tagmsg, host->addr + TUL_SFifo);
1314 outb(scb->tagid, host->addr + TUL_SFifo);
1315 }
1316 if ((active_tc->flags & (TCF_WDTR_DONE | TCF_NO_WDTR)) == 0) {
1317 active_tc->flags |= TCF_WDTR_DONE;
1318 outb(MSG_EXTEND, host->addr + TUL_SFifo);
1319 outb(2, host->addr + TUL_SFifo); /* Extended msg length */
1320 outb(3, host->addr + TUL_SFifo); /* Sync request */
1321 outb(1, host->addr + TUL_SFifo); /* Start from 16 bits */
1322 } else if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) {
1323 active_tc->flags |= TCF_SYNC_DONE;
1324 outb(MSG_EXTEND, host->addr + TUL_SFifo);
1325 outb(3, host->addr + TUL_SFifo); /* extended msg length */
1326 outb(1, host->addr + TUL_SFifo); /* sync request */
1327 outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo);
1328 outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */
1329 }
1330 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1331 if (wait_tulip(host) == -1)
1332 return -1;
1333 }
1334 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1335 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal);
1336 /* Into before CDB xfer */
1337 return 3;
1338}
1339
1340
1341/**
1342 * initio_state_2 - SCSI state machine
1343 * @host: InitIO host we are controlling
1344 *
1345 * state after selection with attention
1346 * state after selection with attention3
1347 */
1348
1349static int initio_state_2(struct initio_host * host)
1350{
1351 struct scsi_ctrl_blk *scb = host->active;
1352 struct target_control *active_tc = host->active_tc;
1353#if DEBUG_STATE
1354 printk("-s2-");
1355#endif
1356
1357 initio_unlink_pend_scb(host, scb);
1358 initio_append_busy_scb(host, scb);
1359
1360 outb(active_tc->sconfig0, host->addr + TUL_SConfig);
1361
1362 if (host->jsstatus1 & TSS_CMD_PH_CMP)
1363 return 4;
1364
1365 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1366 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)), host->addr + TUL_SSignal);
1367 /* Into before CDB xfer */
1368 return 3;
1369}
1370
1371/**
1372 * initio_state_3 - SCSI state machine
1373 * @host: InitIO host we are controlling
1374 *
1375 * state before CDB xfer is done
1376 */
1377
1378static int initio_state_3(struct initio_host * host)
1379{
1380 struct scsi_ctrl_blk *scb = host->active;
1381 struct target_control *active_tc = host->active_tc;
1382 int i;
1383
1384#if DEBUG_STATE
1385 printk("-s3-");
1386#endif
1387 for (;;) {
1388 switch (host->phase) {
1389 case CMD_OUT: /* Command out phase */
1390 for (i = 0; i < (int) scb->cdblen; i++)
1391 outb(scb->cdb[i], host->addr + TUL_SFifo);
1392 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1393 if (wait_tulip(host) == -1)
1394 return -1;
1395 if (host->phase == CMD_OUT)
1396 return initio_bad_seq(host);
1397 return 4;
1398
1399 case MSG_IN: /* Message in phase */
1400 scb->next_state = 3;
1401 if (initio_msgin(host) == -1)
1402 return -1;
1403 break;
1404
1405 case STATUS_IN: /* Status phase */
1406 if (initio_status_msg(host) == -1)
1407 return -1;
1408 break;
1409
1410 case MSG_OUT: /* Message out phase */
1411 if (active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) {
1412 outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */
1413 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1414 if (wait_tulip(host) == -1)
1415 return -1;
1416 } else {
1417 active_tc->flags |= TCF_SYNC_DONE;
1418
1419 outb(MSG_EXTEND, host->addr + TUL_SFifo);
1420 outb(3, host->addr + TUL_SFifo); /* ext. msg len */
1421 outb(1, host->addr + TUL_SFifo); /* sync request */
1422 outb(initio_rate_tbl[active_tc->flags & TCF_SCSI_RATE], host->addr + TUL_SFifo);
1423 outb(MAX_OFFSET, host->addr + TUL_SFifo); /* REQ/ACK offset */
1424 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1425 if (wait_tulip(host) == -1)
1426 return -1;
1427 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1428 outb(inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7), host->addr + TUL_SSignal);
1429
1430 }
1431 break;
1432 default:
1433 return initio_bad_seq(host);
1434 }
1435 }
1436}
1437
1438/**
1439 * initio_state_4 - SCSI state machine
1440 * @host: InitIO host we are controlling
1441 *
1442 * SCSI state machine. State 4
1443 */
1444
1445static int initio_state_4(struct initio_host * host)
1446{
1447 struct scsi_ctrl_blk *scb = host->active;
1448
1449#if DEBUG_STATE
1450 printk("-s4-");
1451#endif
1452 if ((scb->flags & SCF_DIR) == SCF_NO_XF) {
1453 return 6; /* Go to state 6 (After data) */
1454 }
1455 for (;;) {
1456 if (scb->buflen == 0)
1457 return 6;
1458
1459 switch (host->phase) {
1460
1461 case STATUS_IN: /* Status phase */
1462 if ((scb->flags & SCF_DIR) != 0) /* if direction bit set then report data underrun */
1463 scb->hastat = HOST_DO_DU;
1464 if ((initio_status_msg(host)) == -1)
1465 return -1;
1466 break;
1467
1468 case MSG_IN: /* Message in phase */
1469 scb->next_state = 0x4;
1470 if (initio_msgin(host) == -1)
1471 return -1;
1472 break;
1473
1474 case MSG_OUT: /* Message out phase */
1475 if (host->jsstatus0 & TSS_PAR_ERROR) {
1476 scb->buflen = 0;
1477 scb->hastat = HOST_DO_DU;
1478 if (initio_msgout_ide(host) == -1)
1479 return -1;
1480 return 6;
1481 } else {
1482 outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */
1483 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1484 if (wait_tulip(host) == -1)
1485 return -1;
1486 }
1487 break;
1488
1489 case DATA_IN: /* Data in phase */
1490 return initio_xfer_data_in(host);
1491
1492 case DATA_OUT: /* Data out phase */
1493 return initio_xfer_data_out(host);
1494
1495 default:
1496 return initio_bad_seq(host);
1497 }
1498 }
1499}
1500
1501
1502/**
1503 * initio_state_5 - SCSI state machine
1504 * @host: InitIO host we are controlling
1505 *
1506 * State after dma xfer done or phase change before xfer done
1507 */
1508
1509static int initio_state_5(struct initio_host * host)
1510{
1511 struct scsi_ctrl_blk *scb = host->active;
1512 long cnt, xcnt; /* cannot use unsigned !! code: if (xcnt < 0) */
1513
1514#if DEBUG_STATE
1515 printk("-s5-");
1516#endif
1517 /*------ get remaining count -------*/
1518 cnt = inl(host->addr + TUL_SCnt0) & 0x0FFFFFF;
1519
1520 if (inb(host->addr + TUL_XCmd) & 0x20) {
1521 /* ----------------------- DATA_IN ----------------------------- */
1522 /* check scsi parity error */
1523 if (host->jsstatus0 & TSS_PAR_ERROR)
1524 scb->hastat = HOST_DO_DU;
1525 if (inb(host->addr + TUL_XStatus) & XPEND) { /* DMA xfer pending, Send STOP */
1526 /* tell Hardware scsi xfer has been terminated */
1527 outb(inb(host->addr + TUL_XCtrl) | 0x80, host->addr + TUL_XCtrl);
1528 /* wait until DMA xfer not pending */
1529 while (inb(host->addr + TUL_XStatus) & XPEND)
1530 cpu_relax();
1531 }
1532 } else {
1533 /*-------- DATA OUT -----------*/
1534 if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0) {
1535 if (host->active_tc->js_period & TSC_WIDE_SCSI)
1536 cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F) << 1;
1537 else
1538 cnt += (inb(host->addr + TUL_SFifoCnt) & 0x1F);
1539 }
1540 if (inb(host->addr + TUL_XStatus) & XPEND) { /* if DMA xfer is pending, abort DMA xfer */
1541 outb(TAX_X_ABT, host->addr + TUL_XCmd);
1542 /* wait Abort DMA xfer done */
1543 while ((inb(host->addr + TUL_Int) & XABT) == 0)
1544 cpu_relax();
1545 }
1546 if ((cnt == 1) && (host->phase == DATA_OUT)) {
1547 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1548 if (wait_tulip(host) == -1)
1549 return -1;
1550 cnt = 0;
1551 } else {
1552 if ((inb(host->addr + TUL_SStatus1) & TSS_XFER_CMP) == 0)
1553 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1554 }
1555 }
1556 if (cnt == 0) {
1557 scb->buflen = 0;
1558 return 6; /* After Data */
1559 }
1560 /* Update active data pointer */
1561 xcnt = (long) scb->buflen - cnt; /* xcnt== bytes already xferred */
1562 scb->buflen = (u32) cnt; /* cnt == bytes left to be xferred */
1563 if (scb->flags & SCF_SG) {
1564 struct sg_entry *sgp;
1565 unsigned long i;
1566
1567 sgp = &scb->sglist[scb->sgidx];
1568 for (i = scb->sgidx; i < scb->sgmax; sgp++, i++) {
1569 xcnt -= (long) sgp->len;
1570 if (xcnt < 0) { /* this sgp xfer half done */
1571 xcnt += (long) sgp->len; /* xcnt == bytes xferred in this sgp */
1572 sgp->data += (u32) xcnt; /* new ptr to be xfer */
1573 sgp->len -= (u32) xcnt; /* new len to be xfer */
1574 scb->bufptr += ((u32) (i - scb->sgidx) << 3);
1575 /* new SG table ptr */
1576 scb->sglen = (u8) (scb->sgmax - i);
1577 /* new SG table len */
1578 scb->sgidx = (u16) i;
1579 /* for next disc and come in this loop */
1580 return 4; /* Go to state 4 */
1581 }
1582 /* else (xcnt >= 0 , i.e. this sgp already xferred */
1583 } /* for */
1584 return 6; /* Go to state 6 */
1585 } else {
1586 scb->bufptr += (u32) xcnt;
1587 }
1588 return 4; /* Go to state 4 */
1589}
1590
1591/**
1592 * initio_state_6 - SCSI state machine
1593 * @host: InitIO host we are controlling
1594 *
1595 * State after Data phase
1596 */
1597
1598static int initio_state_6(struct initio_host * host)
1599{
1600 struct scsi_ctrl_blk *scb = host->active;
1601
1602#if DEBUG_STATE
1603 printk("-s6-");
1604#endif
1605 for (;;) {
1606 switch (host->phase) {
1607 case STATUS_IN: /* Status phase */
1608 if ((initio_status_msg(host)) == -1)
1609 return -1;
1610 break;
1611
1612 case MSG_IN: /* Message in phase */
1613 scb->next_state = 6;
1614 if ((initio_msgin(host)) == -1)
1615 return -1;
1616 break;
1617
1618 case MSG_OUT: /* Message out phase */
1619 outb(MSG_NOP, host->addr + TUL_SFifo); /* msg nop */
1620 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1621 if (wait_tulip(host) == -1)
1622 return -1;
1623 break;
1624
1625 case DATA_IN: /* Data in phase */
1626 return initio_xpad_in(host);
1627
1628 case DATA_OUT: /* Data out phase */
1629 return initio_xpad_out(host);
1630
1631 default:
1632 return initio_bad_seq(host);
1633 }
1634 }
1635}
1636
1637/**
1638 * initio_state_7 - SCSI state machine
1639 * @host: InitIO host we are controlling
1640 *
1641 */
1642
1643int initio_state_7(struct initio_host * host)
1644{
1645 int cnt, i;
1646
1647#if DEBUG_STATE
1648 printk("-s7-");
1649#endif
1650 /* flush SCSI FIFO */
1651 cnt = inb(host->addr + TUL_SFifoCnt) & 0x1F;
1652 if (cnt) {
1653 for (i = 0; i < cnt; i++)
1654 inb(host->addr + TUL_SFifo);
1655 }
1656 switch (host->phase) {
1657 case DATA_IN: /* Data in phase */
1658 case DATA_OUT: /* Data out phase */
1659 return initio_bad_seq(host);
1660 default:
1661 return 6; /* Go to state 6 */
1662 }
1663}
1664
1665/**
1666 * initio_xfer_data_in - Commence data input
1667 * @host: InitIO host in use
1668 *
1669 * Commence a block of data transfer. The transfer itself will
1670 * be managed by the controller and we will get a completion (or
1671 * failure) interrupt.
1672 */
1673static int initio_xfer_data_in(struct initio_host * host)
1674{
1675 struct scsi_ctrl_blk *scb = host->active;
1676
1677 if ((scb->flags & SCF_DIR) == SCF_DOUT)
1678 return 6; /* wrong direction */
1679
1680 outl(scb->buflen, host->addr + TUL_SCnt0);
1681 outb(TSC_XF_DMA_IN, host->addr + TUL_SCmd); /* 7/25/95 */
1682
1683 if (scb->flags & SCF_SG) { /* S/G xfer */
1684 outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH);
1685 outl(scb->bufptr, host->addr + TUL_XAddH);
1686 outb(TAX_SG_IN, host->addr + TUL_XCmd);
1687 } else {
1688 outl(scb->buflen, host->addr + TUL_XCntH);
1689 outl(scb->bufptr, host->addr + TUL_XAddH);
1690 outb(TAX_X_IN, host->addr + TUL_XCmd);
1691 }
1692 scb->next_state = 0x5;
1693 return 0; /* return to OS, wait xfer done , let jas_isr come in */
1694}
1695
1696/**
1697 * initio_xfer_data_out - Commence data output
1698 * @host: InitIO host in use
1699 *
1700 * Commence a block of data transfer. The transfer itself will
1701 * be managed by the controller and we will get a completion (or
1702 * failure) interrupt.
1703 */
1704
1705static int initio_xfer_data_out(struct initio_host * host)
1706{
1707 struct scsi_ctrl_blk *scb = host->active;
1708
1709 if ((scb->flags & SCF_DIR) == SCF_DIN)
1710 return 6; /* wrong direction */
1711
1712 outl(scb->buflen, host->addr + TUL_SCnt0);
1713 outb(TSC_XF_DMA_OUT, host->addr + TUL_SCmd);
1714
1715 if (scb->flags & SCF_SG) { /* S/G xfer */
1716 outl(((u32) scb->sglen) << 3, host->addr + TUL_XCntH);
1717 outl(scb->bufptr, host->addr + TUL_XAddH);
1718 outb(TAX_SG_OUT, host->addr + TUL_XCmd);
1719 } else {
1720 outl(scb->buflen, host->addr + TUL_XCntH);
1721 outl(scb->bufptr, host->addr + TUL_XAddH);
1722 outb(TAX_X_OUT, host->addr + TUL_XCmd);
1723 }
1724
1725 scb->next_state = 0x5;
1726 return 0; /* return to OS, wait xfer done , let jas_isr come in */
1727}
1728
1729int initio_xpad_in(struct initio_host * host)
1730{
1731 struct scsi_ctrl_blk *scb = host->active;
1732 struct target_control *active_tc = host->active_tc;
1733
1734 if ((scb->flags & SCF_DIR) != SCF_NO_DCHK)
1735 scb->hastat = HOST_DO_DU; /* over run */
1736 for (;;) {
1737 if (active_tc->js_period & TSC_WIDE_SCSI)
1738 outl(2, host->addr + TUL_SCnt0);
1739 else
1740 outl(1, host->addr + TUL_SCnt0);
1741
1742 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
1743 if (wait_tulip(host) == -1)
1744 return -1;
1745 if (host->phase != DATA_IN) {
1746 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1747 return 6;
1748 }
1749 inb(host->addr + TUL_SFifo);
1750 }
1751}
1752
1753int initio_xpad_out(struct initio_host * host)
1754{
1755 struct scsi_ctrl_blk *scb = host->active;
1756 struct target_control *active_tc = host->active_tc;
1757
1758 if ((scb->flags & SCF_DIR) != SCF_NO_DCHK)
1759 scb->hastat = HOST_DO_DU; /* over run */
1760 for (;;) {
1761 if (active_tc->js_period & TSC_WIDE_SCSI)
1762 outl(2, host->addr + TUL_SCnt0);
1763 else
1764 outl(1, host->addr + TUL_SCnt0);
1765
1766 outb(0, host->addr + TUL_SFifo);
1767 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1768 if ((wait_tulip(host)) == -1)
1769 return -1;
1770 if (host->phase != DATA_OUT) { /* Disable wide CPU to allow read 16 bits */
1771 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1);
1772 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1773 return 6;
1774 }
1775 }
1776}
1777
1778int initio_status_msg(struct initio_host * host)
1779{ /* status & MSG_IN */
1780 struct scsi_ctrl_blk *scb = host->active;
1781 u8 msg;
1782
1783 outb(TSC_CMD_COMP, host->addr + TUL_SCmd);
1784 if (wait_tulip(host) == -1)
1785 return -1;
1786
1787 /* get status */
1788 scb->tastat = inb(host->addr + TUL_SFifo);
1789
1790 if (host->phase == MSG_OUT) {
1791 if (host->jsstatus0 & TSS_PAR_ERROR)
1792 outb(MSG_PARITY, host->addr + TUL_SFifo);
1793 else
1794 outb(MSG_NOP, host->addr + TUL_SFifo);
1795 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1796 return wait_tulip(host);
1797 }
1798 if (host->phase == MSG_IN) {
1799 msg = inb(host->addr + TUL_SFifo);
1800 if (host->jsstatus0 & TSS_PAR_ERROR) { /* Parity error */
1801 if ((initio_msgin_accept(host)) == -1)
1802 return -1;
1803 if (host->phase != MSG_OUT)
1804 return initio_bad_seq(host);
1805 outb(MSG_PARITY, host->addr + TUL_SFifo);
1806 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
1807 return wait_tulip(host);
1808 }
1809 if (msg == 0) { /* Command complete */
1810
1811 if ((scb->tastat & 0x18) == 0x10) /* No link support */
1812 return initio_bad_seq(host);
1813 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1814 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
1815 return initio_wait_done_disc(host);
1816
1817 }
1818 if (msg == MSG_LINK_COMP || msg == MSG_LINK_FLAG) {
1819 if ((scb->tastat & 0x18) == 0x10)
1820 return initio_msgin_accept(host);
1821 }
1822 }
1823 return initio_bad_seq(host);
1824}
1825
1826
1827/* scsi bus free */
1828int int_initio_busfree(struct initio_host * host)
1829{
1830 struct scsi_ctrl_blk *scb = host->active;
1831
1832 if (scb != NULL) {
1833 if (scb->status & SCB_SELECT) { /* selection timeout */
1834 initio_unlink_pend_scb(host, scb);
1835 scb->hastat = HOST_SEL_TOUT;
1836 initio_append_done_scb(host, scb);
1837 } else { /* Unexpected bus free */
1838 initio_unlink_busy_scb(host, scb);
1839 scb->hastat = HOST_BUS_FREE;
1840 initio_append_done_scb(host, scb);
1841 }
1842 host->active = NULL;
1843 host->active_tc = NULL;
1844 }
1845 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
1846 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
1847 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
1848 return -1;
1849}
1850
1851
1852/**
1853 * int_initio_scsi_rst - SCSI reset occurred
1854 * @host: Host seeing the reset
1855 *
1856 * A SCSI bus reset has occurred. Clean up any pending transfer
1857 * the hardware is doing by DMA and then abort all active and
1858 * disconnected commands. The mid layer should sort the rest out
1859 * for us
1860 */
1861
1862static int int_initio_scsi_rst(struct initio_host * host)
1863{
1864 struct scsi_ctrl_blk *scb;
1865 int i;
1866
1867 /* if DMA xfer is pending, abort DMA xfer */
1868 if (inb(host->addr + TUL_XStatus) & 0x01) {
1869 outb(TAX_X_ABT | TAX_X_CLR_FIFO, host->addr + TUL_XCmd);
1870 /* wait Abort DMA xfer done */
1871 while ((inb(host->addr + TUL_Int) & 0x04) == 0)
1872 cpu_relax();
1873 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
1874 }
1875 /* Abort all active & disconnected scb */
1876 while ((scb = initio_pop_busy_scb(host)) != NULL) {
1877 scb->hastat = HOST_BAD_PHAS;
1878 initio_append_done_scb(host, scb);
1879 }
1880 host->active = NULL;
1881 host->active_tc = NULL;
1882
1883 /* clr sync nego. done flag */
1884 for (i = 0; i < host->max_tar; i++)
1885 host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
1886 return -1;
1887}
1888
1889/**
1890 * int_initio_scsi_resel - Reselection occurred
1891 * @host: InitIO host adapter
1892 *
1893 * A SCSI reselection event has been signalled and the interrupt
1894 * is now being processed. Work out which command block needs attention
1895 * and continue processing that command.
1896 */
1897
1898int int_initio_resel(struct initio_host * host)
1899{
1900 struct scsi_ctrl_blk *scb;
1901 struct target_control *active_tc;
1902 u8 tag, msg = 0;
1903 u8 tar, lun;
1904
1905 if ((scb = host->active) != NULL) {
1906 /* FIXME: Why check and not just clear ? */
1907 if (scb->status & SCB_SELECT) /* if waiting for selection complete */
1908 scb->status &= ~SCB_SELECT;
1909 host->active = NULL;
1910 }
1911 /* --------- get target id---------------------- */
1912 tar = inb(host->addr + TUL_SBusId);
1913 /* ------ get LUN from Identify message----------- */
1914 lun = inb(host->addr + TUL_SIdent) & 0x0F;
1915 /* 07/22/98 from 0x1F -> 0x0F */
1916 active_tc = &host->targets[tar];
1917 host->active_tc = active_tc;
1918 outb(active_tc->sconfig0, host->addr + TUL_SConfig);
1919 outb(active_tc->js_period, host->addr + TUL_SPeriod);
1920
1921 /* ------------- tag queueing ? ------------------- */
1922 if (active_tc->drv_flags & TCF_DRV_EN_TAG) {
1923 if ((initio_msgin_accept(host)) == -1)
1924 return -1;
1925 if (host->phase != MSG_IN)
1926 goto no_tag;
1927 outl(1, host->addr + TUL_SCnt0);
1928 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
1929 if (wait_tulip(host) == -1)
1930 return -1;
1931 msg = inb(host->addr + TUL_SFifo); /* Read Tag Message */
1932
1933 if (msg < MSG_STAG || msg > MSG_OTAG) /* Is simple Tag */
1934 goto no_tag;
1935
1936 if (initio_msgin_accept(host) == -1)
1937 return -1;
1938
1939 if (host->phase != MSG_IN)
1940 goto no_tag;
1941
1942 outl(1, host->addr + TUL_SCnt0);
1943 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
1944 if (wait_tulip(host) == -1)
1945 return -1;
1946 tag = inb(host->addr + TUL_SFifo); /* Read Tag ID */
1947 scb = host->scb + tag;
1948 if (scb->target != tar || scb->lun != lun) {
1949 return initio_msgout_abort_tag(host);
1950 }
1951 if (scb->status != SCB_BUSY) { /* 03/24/95 */
1952 return initio_msgout_abort_tag(host);
1953 }
1954 host->active = scb;
1955 if ((initio_msgin_accept(host)) == -1)
1956 return -1;
1957 } else { /* No tag */
1958 no_tag:
1959 if ((scb = initio_find_busy_scb(host, tar | (lun << 8))) == NULL) {
1960 return initio_msgout_abort_targ(host);
1961 }
1962 host->active = scb;
1963 if (!(active_tc->drv_flags & TCF_DRV_EN_TAG)) {
1964 if ((initio_msgin_accept(host)) == -1)
1965 return -1;
1966 }
1967 }
1968 return 0;
1969}
1970
1971/**
1972 * int_initio_bad_seq - out of phase
1973 * @host: InitIO host flagging event
1974 *
1975 * We have ended up out of phase somehow. Reset the host controller
1976 * and throw all our toys out of the pram. Let the midlayer clean up
1977 */
1978
1979static int int_initio_bad_seq(struct initio_host * host)
1980{ /* target wrong phase */
1981 struct scsi_ctrl_blk *scb;
1982 int i;
1983
1984 initio_reset_scsi(host, 10);
1985
1986 while ((scb = initio_pop_busy_scb(host)) != NULL) {
1987 scb->hastat = HOST_BAD_PHAS;
1988 initio_append_done_scb(host, scb);
1989 }
1990 for (i = 0; i < host->max_tar; i++)
1991 host->targets[i].flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
1992 return -1;
1993}
1994
1995
1996/**
1997 * initio_msgout_abort_targ - abort a tag
1998 * @host: InitIO host
1999 *
2000 * Abort when the target/lun does not match or when our SCB is not
2001 * busy. Used by untagged commands.
2002 */
2003
2004static int initio_msgout_abort_targ(struct initio_host * host)
2005{
2006
2007 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2008 if (initio_msgin_accept(host) == -1)
2009 return -1;
2010 if (host->phase != MSG_OUT)
2011 return initio_bad_seq(host);
2012
2013 outb(MSG_ABORT, host->addr + TUL_SFifo);
2014 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2015
2016 return initio_wait_disc(host);
2017}
2018
2019/**
2020 * initio_msgout_abort_tag - abort a tag
2021 * @host: InitIO host
2022 *
2023 * Abort when the target/lun does not match or when our SCB is not
2024 * busy. Used for tagged commands.
2025 */
2026
2027static int initio_msgout_abort_tag(struct initio_host * host)
2028{
2029
2030 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2031 if (initio_msgin_accept(host) == -1)
2032 return -1;
2033 if (host->phase != MSG_OUT)
2034 return initio_bad_seq(host);
2035
2036 outb(MSG_ABORT_TAG, host->addr + TUL_SFifo);
2037 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2038
2039 return initio_wait_disc(host);
2040
2041}
2042
2043/**
2044 * initio_msgin - Message in
2045 * @host: InitIO Host
2046 *
2047 * Process incoming message
2048 */
2049static int initio_msgin(struct initio_host * host)
2050{
2051 struct target_control *active_tc;
2052
2053 for (;;) {
2054 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
2055
2056 outl(1, host->addr + TUL_SCnt0);
2057 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
2058 if (wait_tulip(host) == -1)
2059 return -1;
2060
2061 switch (inb(host->addr + TUL_SFifo)) {
2062 case MSG_DISC: /* Disconnect msg */
2063 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
2064 return initio_wait_disc(host);
2065 case MSG_SDP:
2066 case MSG_RESTORE:
2067 case MSG_NOP:
2068 initio_msgin_accept(host);
2069 break;
2070 case MSG_REJ: /* Clear ATN first */
2071 outb((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)),
2072 host->addr + TUL_SSignal);
2073 active_tc = host->active_tc;
2074 if ((active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0) /* do sync nego */
2075 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN),
2076 host->addr + TUL_SSignal);
2077 initio_msgin_accept(host);
2078 break;
2079 case MSG_EXTEND: /* extended msg */
2080 initio_msgin_extend(host);
2081 break;
2082 case MSG_IGNOREWIDE:
2083 initio_msgin_accept(host);
2084 break;
2085 case MSG_COMP:
2086 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
2087 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
2088 return initio_wait_done_disc(host);
2089 default:
2090 initio_msgout_reject(host);
2091 break;
2092 }
2093 if (host->phase != MSG_IN)
2094 return host->phase;
2095 }
2096 /* statement won't reach here */
2097}
2098
2099static int initio_msgout_reject(struct initio_host * host)
2100{
2101 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2102
2103 if (initio_msgin_accept(host) == -1)
2104 return -1;
2105
2106 if (host->phase == MSG_OUT) {
2107 outb(MSG_REJ, host->addr + TUL_SFifo); /* Msg reject */
2108 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2109 return wait_tulip(host);
2110 }
2111 return host->phase;
2112}
2113
2114static int initio_msgout_ide(struct initio_host * host)
2115{
2116 outb(MSG_IDE, host->addr + TUL_SFifo); /* Initiator Detected Error */
2117 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2118 return wait_tulip(host);
2119}
2120
2121static int initio_msgin_extend(struct initio_host * host)
2122{
2123 u8 len, idx;
2124
2125 if (initio_msgin_accept(host) != MSG_IN)
2126 return host->phase;
2127
2128 /* Get extended msg length */
2129 outl(1, host->addr + TUL_SCnt0);
2130 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
2131 if (wait_tulip(host) == -1)
2132 return -1;
2133
2134 len = inb(host->addr + TUL_SFifo);
2135 host->msg[0] = len;
2136 for (idx = 1; len != 0; len--) {
2137
2138 if ((initio_msgin_accept(host)) != MSG_IN)
2139 return host->phase;
2140 outl(1, host->addr + TUL_SCnt0);
2141 outb(TSC_XF_FIFO_IN, host->addr + TUL_SCmd);
2142 if (wait_tulip(host) == -1)
2143 return -1;
2144 host->msg[idx++] = inb(host->addr + TUL_SFifo);
2145 }
2146 if (host->msg[1] == 1) { /* if it's synchronous data transfer request */
2147 u8 r;
2148 if (host->msg[0] != 3) /* if length is not right */
2149 return initio_msgout_reject(host);
2150 if (host->active_tc->flags & TCF_NO_SYNC_NEGO) { /* Set OFFSET=0 to do async, nego back */
2151 host->msg[3] = 0;
2152 } else {
2153 if (initio_msgin_sync(host) == 0 &&
2154 (host->active_tc->flags & TCF_SYNC_DONE)) {
2155 initio_sync_done(host);
2156 return initio_msgin_accept(host);
2157 }
2158 }
2159
2160 r = inb(host->addr + TUL_SSignal);
2161 outb((r & (TSC_SET_ACK | 7)) | TSC_SET_ATN,
2162 host->addr + TUL_SSignal);
2163 if (initio_msgin_accept(host) != MSG_OUT)
2164 return host->phase;
2165 /* sync msg out */
2166 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0);
2167
2168 initio_sync_done(host);
2169
2170 outb(MSG_EXTEND, host->addr + TUL_SFifo);
2171 outb(3, host->addr + TUL_SFifo);
2172 outb(1, host->addr + TUL_SFifo);
2173 outb(host->msg[2], host->addr + TUL_SFifo);
2174 outb(host->msg[3], host->addr + TUL_SFifo);
2175 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2176 return wait_tulip(host);
2177 }
2178 if (host->msg[0] != 2 || host->msg[1] != 3)
2179 return initio_msgout_reject(host);
2180 /* if it's WIDE DATA XFER REQ */
2181 if (host->active_tc->flags & TCF_NO_WDTR) {
2182 host->msg[2] = 0;
2183 } else {
2184 if (host->msg[2] > 2) /* > 32 bits */
2185 return initio_msgout_reject(host);
2186 if (host->msg[2] == 2) { /* == 32 */
2187 host->msg[2] = 1;
2188 } else {
2189 if ((host->active_tc->flags & TCF_NO_WDTR) == 0) {
2190 wdtr_done(host);
2191 if ((host->active_tc->flags & (TCF_SYNC_DONE | TCF_NO_SYNC_NEGO)) == 0)
2192 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2193 return initio_msgin_accept(host);
2194 }
2195 }
2196 }
2197 outb(((inb(host->addr + TUL_SSignal) & (TSC_SET_ACK | 7)) | TSC_SET_ATN), host->addr + TUL_SSignal);
2198
2199 if (initio_msgin_accept(host) != MSG_OUT)
2200 return host->phase;
2201 /* WDTR msg out */
2202 outb(MSG_EXTEND, host->addr + TUL_SFifo);
2203 outb(2, host->addr + TUL_SFifo);
2204 outb(3, host->addr + TUL_SFifo);
2205 outb(host->msg[2], host->addr + TUL_SFifo);
2206 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2207 return wait_tulip(host);
2208}
2209
2210static int initio_msgin_sync(struct initio_host * host)
2211{
2212 char default_period;
2213
2214 default_period = initio_rate_tbl[host->active_tc->flags & TCF_SCSI_RATE];
2215 if (host->msg[3] > MAX_OFFSET) {
2216 host->msg[3] = MAX_OFFSET;
2217 if (host->msg[2] < default_period) {
2218 host->msg[2] = default_period;
2219 return 1;
2220 }
2221 if (host->msg[2] >= 59) /* Change to async */
2222 host->msg[3] = 0;
2223 return 1;
2224 }
2225 /* offset requests asynchronous transfers ? */
2226 if (host->msg[3] == 0) {
2227 return 0;
2228 }
2229 if (host->msg[2] < default_period) {
2230 host->msg[2] = default_period;
2231 return 1;
2232 }
2233 if (host->msg[2] >= 59) {
2234 host->msg[3] = 0;
2235 return 1;
2236 }
2237 return 0;
2238}
2239
2240static int wdtr_done(struct initio_host * host)
2241{
2242 host->active_tc->flags &= ~TCF_SYNC_DONE;
2243 host->active_tc->flags |= TCF_WDTR_DONE;
2244
2245 host->active_tc->js_period = 0;
2246 if (host->msg[2]) /* if 16 bit */
2247 host->active_tc->js_period |= TSC_WIDE_SCSI;
2248 host->active_tc->sconfig0 &= ~TSC_ALT_PERIOD;
2249 outb(host->active_tc->sconfig0, host->addr + TUL_SConfig);
2250 outb(host->active_tc->js_period, host->addr + TUL_SPeriod);
2251
2252 return 1;
2253}
2254
2255static int initio_sync_done(struct initio_host * host)
2256{
2257 int i;
2258
2259 host->active_tc->flags |= TCF_SYNC_DONE;
2260
2261 if (host->msg[3]) {
2262 host->active_tc->js_period |= host->msg[3];
2263 for (i = 0; i < 8; i++) {
2264 if (initio_rate_tbl[i] >= host->msg[2]) /* pick the big one */
2265 break;
2266 }
2267 host->active_tc->js_period |= (i << 4);
2268 host->active_tc->sconfig0 |= TSC_ALT_PERIOD;
2269 }
2270 outb(host->active_tc->sconfig0, host->addr + TUL_SConfig);
2271 outb(host->active_tc->js_period, host->addr + TUL_SPeriod);
2272
2273 return -1;
2274}
2275
2276
2277static int initio_post_scsi_rst(struct initio_host * host)
2278{
2279 struct scsi_ctrl_blk *scb;
2280 struct target_control *active_tc;
2281 int i;
2282
2283 host->active = NULL;
2284 host->active_tc = NULL;
2285 host->flags = 0;
2286
2287 while ((scb = initio_pop_busy_scb(host)) != NULL) {
2288 scb->hastat = HOST_BAD_PHAS;
2289 initio_append_done_scb(host, scb);
2290 }
2291 /* clear sync done flag */
2292 active_tc = &host->targets[0];
2293 for (i = 0; i < host->max_tar; active_tc++, i++) {
2294 active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE);
2295 /* Initialize the sync. xfer register values to an asyn xfer */
2296 active_tc->js_period = 0;
2297 active_tc->sconfig0 = host->sconf1;
2298 host->act_tags[0] = 0; /* 07/22/98 */
2299 host->targets[i].flags &= ~TCF_BUSY; /* 07/22/98 */
2300 } /* for */
2301
2302 return -1;
2303}
2304
2305static void initio_select_atn_stop(struct initio_host * host, struct scsi_ctrl_blk * scb)
2306{
2307 scb->status |= SCB_SELECT;
2308 scb->next_state = 0x1;
2309 host->active = scb;
2310 host->active_tc = &host->targets[scb->target];
2311 outb(TSC_SELATNSTOP, host->addr + TUL_SCmd);
2312}
2313
2314
2315static void initio_select_atn(struct initio_host * host, struct scsi_ctrl_blk * scb)
2316{
2317 int i;
2318
2319 scb->status |= SCB_SELECT;
2320 scb->next_state = 0x2;
2321
2322 outb(scb->ident, host->addr + TUL_SFifo);
2323 for (i = 0; i < (int) scb->cdblen; i++)
2324 outb(scb->cdb[i], host->addr + TUL_SFifo);
2325 host->active_tc = &host->targets[scb->target];
2326 host->active = scb;
2327 outb(TSC_SEL_ATN, host->addr + TUL_SCmd);
2328}
2329
2330static void initio_select_atn3(struct initio_host * host, struct scsi_ctrl_blk * scb)
2331{
2332 int i;
2333
2334 scb->status |= SCB_SELECT;
2335 scb->next_state = 0x2;
2336
2337 outb(scb->ident, host->addr + TUL_SFifo);
2338 outb(scb->tagmsg, host->addr + TUL_SFifo);
2339 outb(scb->tagid, host->addr + TUL_SFifo);
2340 for (i = 0; i < scb->cdblen; i++)
2341 outb(scb->cdb[i], host->addr + TUL_SFifo);
2342 host->active_tc = &host->targets[scb->target];
2343 host->active = scb;
2344 outb(TSC_SEL_ATN3, host->addr + TUL_SCmd);
2345}
2346
2347/**
2348 * initio_bus_device_reset - SCSI Bus Device Reset
2349 * @host: InitIO host to reset
2350 *
2351 * Perform a device reset and abort all pending SCBs for the
2352 * victim device
2353 */
2354int initio_bus_device_reset(struct initio_host * host)
2355{
2356 struct scsi_ctrl_blk *scb = host->active;
2357 struct target_control *active_tc = host->active_tc;
2358 struct scsi_ctrl_blk *tmp, *prev;
2359 u8 tar;
2360
2361 if (host->phase != MSG_OUT)
2362 return int_initio_bad_seq(host); /* Unexpected phase */
2363
2364 initio_unlink_pend_scb(host, scb);
2365 initio_release_scb(host, scb);
2366
2367
2368 tar = scb->target; /* target */
2369 active_tc->flags &= ~(TCF_SYNC_DONE | TCF_WDTR_DONE | TCF_BUSY);
2370 /* clr sync. nego & WDTR flags 07/22/98 */
2371
2372 /* abort all SCB with same target */
2373 prev = tmp = host->first_busy; /* Check Busy queue */
2374 while (tmp != NULL) {
2375 if (tmp->target == tar) {
2376 /* unlink it */
2377 if (tmp == host->first_busy) {
2378 if ((host->first_busy = tmp->next) == NULL)
2379 host->last_busy = NULL;
2380 } else {
2381 prev->next = tmp->next;
2382 if (tmp == host->last_busy)
2383 host->last_busy = prev;
2384 }
2385 tmp->hastat = HOST_ABORTED;
2386 initio_append_done_scb(host, tmp);
2387 }
2388 /* Previous haven't change */
2389 else {
2390 prev = tmp;
2391 }
2392 tmp = tmp->next;
2393 }
2394 outb(MSG_DEVRST, host->addr + TUL_SFifo);
2395 outb(TSC_XF_FIFO_OUT, host->addr + TUL_SCmd);
2396 return initio_wait_disc(host);
2397
2398}
2399
2400static int initio_msgin_accept(struct initio_host * host)
2401{
2402 outb(TSC_MSG_ACCEPT, host->addr + TUL_SCmd);
2403 return wait_tulip(host);
2404}
2405
2406static int wait_tulip(struct initio_host * host)
2407{
2408
2409 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0))
2410 & TSS_INT_PENDING))
2411 cpu_relax();
2412
2413 host->jsint = inb(host->addr + TUL_SInt);
2414 host->phase = host->jsstatus0 & TSS_PH_MASK;
2415 host->jsstatus1 = inb(host->addr + TUL_SStatus1);
2416
2417 if (host->jsint & TSS_RESEL_INT) /* if SCSI bus reset detected */
2418 return int_initio_resel(host);
2419 if (host->jsint & TSS_SEL_TIMEOUT) /* if selected/reselected timeout interrupt */
2420 return int_initio_busfree(host);
2421 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */
2422 return int_initio_scsi_rst(host);
2423
2424 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
2425 if (host->flags & HCF_EXPECT_DONE_DISC) {
2426 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2427 initio_unlink_busy_scb(host, host->active);
2428 host->active->hastat = 0;
2429 initio_append_done_scb(host, host->active);
2430 host->active = NULL;
2431 host->active_tc = NULL;
2432 host->flags &= ~HCF_EXPECT_DONE_DISC;
2433 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2434 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2435 return -1;
2436 }
2437 if (host->flags & HCF_EXPECT_DISC) {
2438 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2439 host->active = NULL;
2440 host->active_tc = NULL;
2441 host->flags &= ~HCF_EXPECT_DISC;
2442 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2443 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2444 return -1;
2445 }
2446 return int_initio_busfree(host);
2447 }
2448 /* The old code really does the below. Can probably be removed */
2449 if (host->jsint & (TSS_FUNC_COMP | TSS_BUS_SERV))
2450 return host->phase;
2451 return host->phase;
2452}
2453
2454static int initio_wait_disc(struct initio_host * host)
2455{
2456 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0)) & TSS_INT_PENDING))
2457 cpu_relax();
2458
2459 host->jsint = inb(host->addr + TUL_SInt);
2460
2461 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */
2462 return int_initio_scsi_rst(host);
2463 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
2464 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2465 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2466 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2467 host->active = NULL;
2468 return -1;
2469 }
2470 return initio_bad_seq(host);
2471}
2472
2473static int initio_wait_done_disc(struct initio_host * host)
2474{
2475 while (!((host->jsstatus0 = inb(host->addr + TUL_SStatus0))
2476 & TSS_INT_PENDING))
2477 cpu_relax();
2478
2479 host->jsint = inb(host->addr + TUL_SInt);
2480
2481 if (host->jsint & TSS_SCSIRST_INT) /* if SCSI bus reset detected */
2482 return int_initio_scsi_rst(host);
2483 if (host->jsint & TSS_DISC_INT) { /* BUS disconnection */
2484 outb(TSC_FLUSH_FIFO, host->addr + TUL_SCtrl0); /* Flush SCSI FIFO */
2485 outb(TSC_INITDEFAULT, host->addr + TUL_SConfig);
2486 outb(TSC_HW_RESELECT, host->addr + TUL_SCtrl1); /* Enable HW reselect */
2487 initio_unlink_busy_scb(host, host->active);
2488
2489 initio_append_done_scb(host, host->active);
2490 host->active = NULL;
2491 return -1;
2492 }
2493 return initio_bad_seq(host);
2494}
2495
2496/**
2497 * i91u_intr - IRQ handler
2498 * @irqno: IRQ number
2499 * @dev_id: IRQ identifier
2500 *
2501 * Take the relevant locks and then invoke the actual isr processing
2502 * code under the lock.
2503 */
2504
2505static irqreturn_t i91u_intr(int irqno, void *dev_id)
2506{
2507 struct Scsi_Host *dev = dev_id;
2508 unsigned long flags;
2509 int r;
2510
2511 spin_lock_irqsave(dev->host_lock, flags);
2512 r = initio_isr((struct initio_host *)dev->hostdata);
2513 spin_unlock_irqrestore(dev->host_lock, flags);
2514 if (r)
2515 return IRQ_HANDLED;
2516 else
2517 return IRQ_NONE;
2518}
2519
2520
2521/**
2522 * initio_build_scb - Build the mappings and SCB
2523 * @host: InitIO host taking the command
2524 * @cblk: Firmware command block
2525 * @cmnd: SCSI midlayer command block
2526 *
2527 * Translate the abstract SCSI command into a firmware command block
2528 * suitable for feeding to the InitIO host controller. This also requires
2529 * we build the scatter gather lists and ensure they are mapped properly.
2530 */
2531
2532static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * cblk, struct scsi_cmnd * cmnd)
2533{ /* Create corresponding SCB */
2534 struct scatterlist *sglist;
2535 struct sg_entry *sg; /* Pointer to SG list */
2536 int i, nseg;
2537 long total_len;
2538 dma_addr_t dma_addr;
2539
2540 /* Fill in the command headers */
2541 cblk->post = i91uSCBPost; /* i91u's callback routine */
2542 cblk->srb = cmnd;
2543 cblk->opcode = ExecSCSI;
2544 cblk->flags = SCF_POST; /* After SCSI done, call post routine */
2545 cblk->target = cmnd->device->id;
2546 cblk->lun = cmnd->device->lun;
2547 cblk->ident = cmnd->device->lun | DISC_ALLOW;
2548
2549 cblk->flags |= SCF_SENSE; /* Turn on auto request sense */
2550
2551 /* Map the sense buffer into bus memory */
2552 dma_addr = dma_map_single(&host->pci_dev->dev, cmnd->sense_buffer,
2553 SENSE_SIZE, DMA_FROM_DEVICE);
2554 cblk->senseptr = (u32)dma_addr;
2555 cblk->senselen = SENSE_SIZE;
2556 cmnd->SCp.ptr = (char *)(unsigned long)dma_addr;
2557 cblk->cdblen = cmnd->cmd_len;
2558
2559 /* Clear the returned status */
2560 cblk->hastat = 0;
2561 cblk->tastat = 0;
2562 /* Command the command */
2563 memcpy(cblk->cdb, cmnd->cmnd, cmnd->cmd_len);
2564
2565 /* Set up tags */
2566 if (cmnd->device->tagged_supported) { /* Tag Support */
2567 cblk->tagmsg = SIMPLE_QUEUE_TAG; /* Do simple tag only */
2568 } else {
2569 cblk->tagmsg = 0; /* No tag support */
2570 }
2571
2572 /* todo handle map_sg error */
2573 nseg = scsi_dma_map(cmnd);
2574 BUG_ON(nseg < 0);
2575 if (nseg) {
2576 dma_addr = dma_map_single(&host->pci_dev->dev, &cblk->sglist[0],
2577 sizeof(struct sg_entry) * TOTAL_SG_ENTRY,
2578 DMA_BIDIRECTIONAL);
2579 cblk->bufptr = (u32)dma_addr;
2580 cmnd->SCp.dma_handle = dma_addr;
2581
2582 cblk->sglen = nseg;
2583
2584 cblk->flags |= SCF_SG; /* Turn on SG list flag */
2585 total_len = 0;
2586 sg = &cblk->sglist[0];
2587 scsi_for_each_sg(cmnd, sglist, cblk->sglen, i) {
2588 sg->data = cpu_to_le32((u32)sg_dma_address(sglist));
2589 sg->len = cpu_to_le32((u32)sg_dma_len(sglist));
2590 total_len += sg_dma_len(sglist);
2591 ++sg;
2592 }
2593
2594 cblk->buflen = (scsi_bufflen(cmnd) > total_len) ?
2595 total_len : scsi_bufflen(cmnd);
2596 } else { /* No data transfer required */
2597 cblk->buflen = 0;
2598 cblk->sglen = 0;
2599 }
2600}
2601
2602/**
2603 * i91u_queuecommand - Queue a new command if possible
2604 * @cmd: SCSI command block from the mid layer
2605 * @done: Completion handler
2606 *
2607 * Attempts to queue a new command with the host adapter. Will return
2608 * zero if successful or indicate a host busy condition if not (which
2609 * will cause the mid layer to call us again later with the command)
2610 */
2611
2612static int i91u_queuecommand_lck(struct scsi_cmnd *cmd,
2613 void (*done)(struct scsi_cmnd *))
2614{
2615 struct initio_host *host = (struct initio_host *) cmd->device->host->hostdata;
2616 struct scsi_ctrl_blk *cmnd;
2617
2618 cmd->scsi_done = done;
2619
2620 cmnd = initio_alloc_scb(host);
2621 if (!cmnd)
2622 return SCSI_MLQUEUE_HOST_BUSY;
2623
2624 initio_build_scb(host, cmnd, cmd);
2625 initio_exec_scb(host, cmnd);
2626 return 0;
2627}
2628
2629static DEF_SCSI_QCMD(i91u_queuecommand)
2630
2631/**
2632 * i91u_bus_reset - reset the SCSI bus
2633 * @cmnd: Command block we want to trigger the reset for
2634 *
2635 * Initiate a SCSI bus reset sequence
2636 */
2637
2638static int i91u_bus_reset(struct scsi_cmnd * cmnd)
2639{
2640 struct initio_host *host;
2641
2642 host = (struct initio_host *) cmnd->device->host->hostdata;
2643
2644 spin_lock_irq(cmnd->device->host->host_lock);
2645 initio_reset_scsi(host, 0);
2646 spin_unlock_irq(cmnd->device->host->host_lock);
2647
2648 return SUCCESS;
2649}
2650
2651/**
2652 * i91u_biospararm - return the "logical geometry
2653 * @sdev: SCSI device
2654 * @dev; Matching block device
2655 * @capacity: Sector size of drive
2656 * @info_array: Return space for BIOS geometry
2657 *
2658 * Map the device geometry in a manner compatible with the host
2659 * controller BIOS behaviour.
2660 *
2661 * FIXME: limited to 2^32 sector devices.
2662 */
2663
2664static int i91u_biosparam(struct scsi_device *sdev, struct block_device *dev,
2665 sector_t capacity, int *info_array)
2666{
2667 struct initio_host *host; /* Point to Host adapter control block */
2668 struct target_control *tc;
2669
2670 host = (struct initio_host *) sdev->host->hostdata;
2671 tc = &host->targets[sdev->id];
2672
2673 if (tc->heads) {
2674 info_array[0] = tc->heads;
2675 info_array[1] = tc->sectors;
2676 info_array[2] = (unsigned long)capacity / tc->heads / tc->sectors;
2677 } else {
2678 if (tc->drv_flags & TCF_DRV_255_63) {
2679 info_array[0] = 255;
2680 info_array[1] = 63;
2681 info_array[2] = (unsigned long)capacity / 255 / 63;
2682 } else {
2683 info_array[0] = 64;
2684 info_array[1] = 32;
2685 info_array[2] = (unsigned long)capacity >> 11;
2686 }
2687 }
2688
2689#if defined(DEBUG_BIOSPARAM)
2690 if (i91u_debug & debug_biosparam) {
2691 printk("bios geometry: head=%d, sec=%d, cyl=%d\n",
2692 info_array[0], info_array[1], info_array[2]);
2693 printk("WARNING: check, if the bios geometry is correct.\n");
2694 }
2695#endif
2696
2697 return 0;
2698}
2699
2700/**
2701 * i91u_unmap_scb - Unmap a command
2702 * @pci_dev: PCI device the command is for
2703 * @cmnd: The command itself
2704 *
2705 * Unmap any PCI mapping/IOMMU resources allocated when the command
2706 * was mapped originally as part of initio_build_scb
2707 */
2708
2709static void i91u_unmap_scb(struct pci_dev *pci_dev, struct scsi_cmnd *cmnd)
2710{
2711 /* auto sense buffer */
2712 if (cmnd->SCp.ptr) {
2713 dma_unmap_single(&pci_dev->dev,
2714 (dma_addr_t)((unsigned long)cmnd->SCp.ptr),
2715 SENSE_SIZE, DMA_FROM_DEVICE);
2716 cmnd->SCp.ptr = NULL;
2717 }
2718
2719 /* request buffer */
2720 if (scsi_sg_count(cmnd)) {
2721 dma_unmap_single(&pci_dev->dev, cmnd->SCp.dma_handle,
2722 sizeof(struct sg_entry) * TOTAL_SG_ENTRY,
2723 DMA_BIDIRECTIONAL);
2724
2725 scsi_dma_unmap(cmnd);
2726 }
2727}
2728
2729/**
2730 * i91uSCBPost - SCSI callback
2731 * @host: Pointer to host adapter control block.
2732 * @cmnd: Pointer to SCSI control block.
2733 *
2734 * This is callback routine be called when tulip finish one
2735 * SCSI command.
2736 */
2737
2738static void i91uSCBPost(u8 * host_mem, u8 * cblk_mem)
2739{
2740 struct scsi_cmnd *cmnd; /* Pointer to SCSI request block */
2741 struct initio_host *host;
2742 struct scsi_ctrl_blk *cblk;
2743
2744 host = (struct initio_host *) host_mem;
2745 cblk = (struct scsi_ctrl_blk *) cblk_mem;
2746 if ((cmnd = cblk->srb) == NULL) {
2747 printk(KERN_ERR "i91uSCBPost: SRB pointer is empty\n");
2748 WARN_ON(1);
2749 initio_release_scb(host, cblk); /* Release SCB for current channel */
2750 return;
2751 }
2752
2753 /*
2754 * Remap the firmware error status into a mid layer one
2755 */
2756 switch (cblk->hastat) {
2757 case 0x0:
2758 case 0xa: /* Linked command complete without error and linked normally */
2759 case 0xb: /* Linked command complete without error interrupt generated */
2760 cblk->hastat = 0;
2761 break;
2762
2763 case 0x11: /* Selection time out-The initiator selection or target
2764 reselection was not complete within the SCSI Time out period */
2765 cblk->hastat = DID_TIME_OUT;
2766 break;
2767
2768 case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus
2769 phase sequence was requested by the target. The host adapter
2770 will generate a SCSI Reset Condition, notifying the host with
2771 a SCRD interrupt */
2772 cblk->hastat = DID_RESET;
2773 break;
2774
2775 case 0x1a: /* SCB Aborted. 07/21/98 */
2776 cblk->hastat = DID_ABORT;
2777 break;
2778
2779 case 0x12: /* Data overrun/underrun-The target attempted to transfer more data
2780 than was allocated by the Data Length field or the sum of the
2781 Scatter / Gather Data Length fields. */
2782 case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */
2783 case 0x16: /* Invalid SCB Operation Code. */
2784
2785 default:
2786 printk("ini9100u: %x %x\n", cblk->hastat, cblk->tastat);
2787 cblk->hastat = DID_ERROR; /* Couldn't find any better */
2788 break;
2789 }
2790
2791 cmnd->result = cblk->tastat | (cblk->hastat << 16);
2792 i91u_unmap_scb(host->pci_dev, cmnd);
2793 cmnd->scsi_done(cmnd); /* Notify system DONE */
2794 initio_release_scb(host, cblk); /* Release SCB for current channel */
2795}
2796
2797static struct scsi_host_template initio_template = {
2798 .proc_name = "INI9100U",
2799 .name = "Initio INI-9X00U/UW SCSI device driver",
2800 .queuecommand = i91u_queuecommand,
2801 .eh_bus_reset_handler = i91u_bus_reset,
2802 .bios_param = i91u_biosparam,
2803 .can_queue = MAX_TARGETS * i91u_MAXQUEUE,
2804 .this_id = 1,
2805 .sg_tablesize = SG_ALL,
2806};
2807
2808static int initio_probe_one(struct pci_dev *pdev,
2809 const struct pci_device_id *id)
2810{
2811 struct Scsi_Host *shost;
2812 struct initio_host *host;
2813 u32 reg;
2814 u16 bios_seg;
2815 struct scsi_ctrl_blk *scb, *tmp, *prev = NULL /* silence gcc */;
2816 int num_scb, i, error;
2817
2818 error = pci_enable_device(pdev);
2819 if (error)
2820 return error;
2821
2822 pci_read_config_dword(pdev, 0x44, (u32 *) & reg);
2823 bios_seg = (u16) (reg & 0xFF);
2824 if (((reg & 0xFF00) >> 8) == 0xFF)
2825 reg = 0;
2826 bios_seg = (bios_seg << 8) + ((u16) ((reg & 0xFF00) >> 8));
2827
2828 if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
2829 printk(KERN_WARNING "i91u: Could not set 32 bit DMA mask\n");
2830 error = -ENODEV;
2831 goto out_disable_device;
2832 }
2833 shost = scsi_host_alloc(&initio_template, sizeof(struct initio_host));
2834 if (!shost) {
2835 printk(KERN_WARNING "initio: Could not allocate host structure.\n");
2836 error = -ENOMEM;
2837 goto out_disable_device;
2838 }
2839 host = (struct initio_host *)shost->hostdata;
2840 memset(host, 0, sizeof(struct initio_host));
2841 host->addr = pci_resource_start(pdev, 0);
2842 host->bios_addr = bios_seg;
2843
2844 if (!request_region(host->addr, 256, "i91u")) {
2845 printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n", host->addr);
2846 error = -ENODEV;
2847 goto out_host_put;
2848 }
2849
2850 if (initio_tag_enable) /* 1.01i */
2851 num_scb = MAX_TARGETS * i91u_MAXQUEUE;
2852 else
2853 num_scb = MAX_TARGETS + 3; /* 1-tape, 1-CD_ROM, 1- extra */
2854
2855 for (; num_scb >= MAX_TARGETS + 3; num_scb--) {
2856 i = num_scb * sizeof(struct scsi_ctrl_blk);
2857 if ((scb = kzalloc(i, GFP_DMA)) != NULL)
2858 break;
2859 }
2860
2861 if (!scb) {
2862 printk(KERN_WARNING "initio: Cannot allocate SCB array.\n");
2863 error = -ENOMEM;
2864 goto out_release_region;
2865 }
2866
2867 host->pci_dev = pdev;
2868
2869 host->semaph = 1;
2870 spin_lock_init(&host->semaph_lock);
2871 host->num_scbs = num_scb;
2872 host->scb = scb;
2873 host->next_pending = scb;
2874 host->next_avail = scb;
2875 for (i = 0, tmp = scb; i < num_scb; i++, tmp++) {
2876 tmp->tagid = i;
2877 if (i != 0)
2878 prev->next = tmp;
2879 prev = tmp;
2880 }
2881 prev->next = NULL;
2882 host->scb_end = tmp;
2883 host->first_avail = scb;
2884 host->last_avail = prev;
2885 spin_lock_init(&host->avail_lock);
2886
2887 initio_init(host, phys_to_virt(((u32)bios_seg << 4)));
2888
2889 host->jsstatus0 = 0;
2890
2891 shost->io_port = host->addr;
2892 shost->n_io_port = 0xff;
2893 shost->can_queue = num_scb; /* 03/05/98 */
2894 shost->unique_id = host->addr;
2895 shost->max_id = host->max_tar;
2896 shost->max_lun = 32; /* 10/21/97 */
2897 shost->irq = pdev->irq;
2898 shost->this_id = host->scsi_id; /* Assign HCS index */
2899 shost->base = host->addr;
2900 shost->sg_tablesize = TOTAL_SG_ENTRY;
2901
2902 error = request_irq(pdev->irq, i91u_intr, IRQF_SHARED, "i91u", shost);
2903 if (error < 0) {
2904 printk(KERN_WARNING "initio: Unable to request IRQ %d\n", pdev->irq);
2905 goto out_free_scbs;
2906 }
2907
2908 pci_set_drvdata(pdev, shost);
2909
2910 error = scsi_add_host(shost, &pdev->dev);
2911 if (error)
2912 goto out_free_irq;
2913 scsi_scan_host(shost);
2914 return 0;
2915out_free_irq:
2916 free_irq(pdev->irq, shost);
2917out_free_scbs:
2918 kfree(host->scb);
2919out_release_region:
2920 release_region(host->addr, 256);
2921out_host_put:
2922 scsi_host_put(shost);
2923out_disable_device:
2924 pci_disable_device(pdev);
2925 return error;
2926}
2927
2928/**
2929 * initio_remove_one - control shutdown
2930 * @pdev: PCI device being released
2931 *
2932 * Release the resources assigned to this adapter after it has
2933 * finished being used.
2934 */
2935
2936static void initio_remove_one(struct pci_dev *pdev)
2937{
2938 struct Scsi_Host *host = pci_get_drvdata(pdev);
2939 struct initio_host *s = (struct initio_host *)host->hostdata;
2940 scsi_remove_host(host);
2941 free_irq(pdev->irq, host);
2942 release_region(s->addr, 256);
2943 scsi_host_put(host);
2944 pci_disable_device(pdev);
2945}
2946
2947MODULE_LICENSE("GPL");
2948
2949static struct pci_device_id initio_pci_tbl[] = {
2950 {PCI_VENDOR_ID_INIT, 0x9500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2951 {PCI_VENDOR_ID_INIT, 0x9400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2952 {PCI_VENDOR_ID_INIT, 0x9401, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2953 {PCI_VENDOR_ID_INIT, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2954 {PCI_VENDOR_ID_DOMEX, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2955 {0,}
2956};
2957MODULE_DEVICE_TABLE(pci, initio_pci_tbl);
2958
2959static struct pci_driver initio_pci_driver = {
2960 .name = "initio",
2961 .id_table = initio_pci_tbl,
2962 .probe = initio_probe_one,
2963 .remove = initio_remove_one,
2964};
2965
2966static int __init initio_init_driver(void)
2967{
2968 return pci_register_driver(&initio_pci_driver);
2969}
2970
2971static void __exit initio_exit_driver(void)
2972{
2973 pci_unregister_driver(&initio_pci_driver);
2974}
2975
2976MODULE_DESCRIPTION("Initio INI-9X00U/UW SCSI device driver");
2977MODULE_AUTHOR("Initio Corporation");
2978MODULE_LICENSE("GPL");
2979
2980module_init(initio_init_driver);
2981module_exit(initio_exit_driver);