Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * omap-usb2.c - USB PHY, talking to USB controller on TI SoCs.
4 *
5 * Copyright (C) 2012-2020 Texas Instruments Incorporated - http://www.ti.com
6 * Author: Kishon Vijay Abraham I <kishon@ti.com>
7 */
8
9#include <linux/clk.h>
10#include <linux/delay.h>
11#include <linux/err.h>
12#include <linux/io.h>
13#include <linux/mfd/syscon.h>
14#include <linux/module.h>
15#include <linux/of.h>
16#include <linux/of_platform.h>
17#include <linux/phy/omap_control_phy.h>
18#include <linux/phy/omap_usb.h>
19#include <linux/phy/phy.h>
20#include <linux/platform_device.h>
21#include <linux/pm_runtime.h>
22#include <linux/property.h>
23#include <linux/regmap.h>
24#include <linux/slab.h>
25#include <linux/sys_soc.h>
26#include <linux/usb/phy_companion.h>
27
28#define USB2PHY_ANA_CONFIG1 0x4c
29#define USB2PHY_DISCON_BYP_LATCH BIT(31)
30
31#define USB2PHY_CHRG_DET 0x14
32#define USB2PHY_CHRG_DET_USE_CHG_DET_REG BIT(29)
33#define USB2PHY_CHRG_DET_DIS_CHG_DET BIT(28)
34
35/* SoC Specific USB2_OTG register definitions */
36#define AM654_USB2_OTG_PD BIT(8)
37#define AM654_USB2_VBUS_DET_EN BIT(5)
38#define AM654_USB2_VBUSVALID_DET_EN BIT(4)
39
40#define OMAP_DEV_PHY_PD BIT(0)
41#define OMAP_USB2_PHY_PD BIT(28)
42
43#define AM437X_USB2_PHY_PD BIT(0)
44#define AM437X_USB2_OTG_PD BIT(1)
45#define AM437X_USB2_OTGVDET_EN BIT(19)
46#define AM437X_USB2_OTGSESSEND_EN BIT(20)
47
48/* Driver Flags */
49#define OMAP_USB2_HAS_START_SRP BIT(0)
50#define OMAP_USB2_HAS_SET_VBUS BIT(1)
51#define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT BIT(2)
52#define OMAP_USB2_DISABLE_CHRG_DET BIT(3)
53
54struct omap_usb {
55 struct usb_phy phy;
56 struct phy_companion *comparator;
57 void __iomem *pll_ctrl_base;
58 void __iomem *phy_base;
59 struct device *dev;
60 struct device *control_dev;
61 struct clk *wkupclk;
62 struct clk *optclk;
63 u8 flags;
64 struct regmap *syscon_phy_power; /* ctrl. reg. acces */
65 unsigned int power_reg; /* power reg. index within syscon */
66 u32 mask;
67 u32 power_on;
68 u32 power_off;
69};
70
71#define phy_to_omapusb(x) container_of((x), struct omap_usb, phy)
72
73struct usb_phy_data {
74 const char *label;
75 u8 flags;
76 u32 mask;
77 u32 power_on;
78 u32 power_off;
79};
80
81static inline u32 omap_usb_readl(void __iomem *addr, unsigned int offset)
82{
83 return __raw_readl(addr + offset);
84}
85
86static inline void omap_usb_writel(void __iomem *addr, unsigned int offset,
87 u32 data)
88{
89 __raw_writel(data, addr + offset);
90}
91
92/**
93 * omap_usb2_set_comparator() - links the comparator present in the system with this phy
94 *
95 * @comparator: the companion phy(comparator) for this phy
96 *
97 * The phy companion driver should call this API passing the phy_companion
98 * filled with set_vbus and start_srp to be used by usb phy.
99 *
100 * For use by phy companion driver
101 */
102int omap_usb2_set_comparator(struct phy_companion *comparator)
103{
104 struct omap_usb *phy;
105 struct usb_phy *x = usb_get_phy(USB_PHY_TYPE_USB2);
106
107 if (IS_ERR(x))
108 return -ENODEV;
109
110 phy = phy_to_omapusb(x);
111 phy->comparator = comparator;
112 return 0;
113}
114EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
115
116static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
117{
118 struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
119
120 if (!phy->comparator || !phy->comparator->set_vbus)
121 return -ENODEV;
122
123 return phy->comparator->set_vbus(phy->comparator, enabled);
124}
125
126static int omap_usb_start_srp(struct usb_otg *otg)
127{
128 struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
129
130 if (!phy->comparator || !phy->comparator->start_srp)
131 return -ENODEV;
132
133 return phy->comparator->start_srp(phy->comparator);
134}
135
136static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
137{
138 otg->host = host;
139 if (!host)
140 otg->state = OTG_STATE_UNDEFINED;
141
142 return 0;
143}
144
145static int omap_usb_set_peripheral(struct usb_otg *otg,
146 struct usb_gadget *gadget)
147{
148 otg->gadget = gadget;
149 if (!gadget)
150 otg->state = OTG_STATE_UNDEFINED;
151
152 return 0;
153}
154
155static int omap_usb_phy_power(struct omap_usb *phy, int on)
156{
157 u32 val;
158 int ret;
159
160 if (!phy->syscon_phy_power) {
161 omap_control_phy_power(phy->control_dev, on);
162 return 0;
163 }
164
165 if (on)
166 val = phy->power_on;
167 else
168 val = phy->power_off;
169
170 ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg,
171 phy->mask, val);
172 return ret;
173}
174
175static int omap_usb_power_off(struct phy *x)
176{
177 struct omap_usb *phy = phy_get_drvdata(x);
178
179 return omap_usb_phy_power(phy, false);
180}
181
182static int omap_usb_power_on(struct phy *x)
183{
184 struct omap_usb *phy = phy_get_drvdata(x);
185
186 return omap_usb_phy_power(phy, true);
187}
188
189static int omap_usb2_disable_clocks(struct omap_usb *phy)
190{
191 clk_disable_unprepare(phy->wkupclk);
192 if (!IS_ERR(phy->optclk))
193 clk_disable_unprepare(phy->optclk);
194
195 return 0;
196}
197
198static int omap_usb2_enable_clocks(struct omap_usb *phy)
199{
200 int ret;
201
202 ret = clk_prepare_enable(phy->wkupclk);
203 if (ret < 0) {
204 dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
205 goto err0;
206 }
207
208 if (!IS_ERR(phy->optclk)) {
209 ret = clk_prepare_enable(phy->optclk);
210 if (ret < 0) {
211 dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
212 goto err1;
213 }
214 }
215
216 return 0;
217
218err1:
219 clk_disable_unprepare(phy->wkupclk);
220
221err0:
222 return ret;
223}
224
225static int omap_usb_init(struct phy *x)
226{
227 struct omap_usb *phy = phy_get_drvdata(x);
228 u32 val;
229
230 omap_usb2_enable_clocks(phy);
231
232 if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
233 /*
234 *
235 * Reduce the sensitivity of internal PHY by enabling the
236 * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This
237 * resolves issues with certain devices which can otherwise
238 * be prone to false disconnects.
239 *
240 */
241 val = omap_usb_readl(phy->phy_base, USB2PHY_ANA_CONFIG1);
242 val |= USB2PHY_DISCON_BYP_LATCH;
243 omap_usb_writel(phy->phy_base, USB2PHY_ANA_CONFIG1, val);
244 }
245
246 if (phy->flags & OMAP_USB2_DISABLE_CHRG_DET) {
247 val = omap_usb_readl(phy->phy_base, USB2PHY_CHRG_DET);
248 val |= USB2PHY_CHRG_DET_USE_CHG_DET_REG |
249 USB2PHY_CHRG_DET_DIS_CHG_DET;
250 omap_usb_writel(phy->phy_base, USB2PHY_CHRG_DET, val);
251 }
252
253 return 0;
254}
255
256static int omap_usb_exit(struct phy *x)
257{
258 struct omap_usb *phy = phy_get_drvdata(x);
259
260 return omap_usb2_disable_clocks(phy);
261}
262
263static const struct phy_ops ops = {
264 .init = omap_usb_init,
265 .exit = omap_usb_exit,
266 .power_on = omap_usb_power_on,
267 .power_off = omap_usb_power_off,
268 .owner = THIS_MODULE,
269};
270
271static const struct usb_phy_data omap_usb2_data = {
272 .label = "omap_usb2",
273 .flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
274 .mask = OMAP_DEV_PHY_PD,
275 .power_off = OMAP_DEV_PHY_PD,
276};
277
278static const struct usb_phy_data omap5_usb2_data = {
279 .label = "omap5_usb2",
280 .flags = 0,
281 .mask = OMAP_DEV_PHY_PD,
282 .power_off = OMAP_DEV_PHY_PD,
283};
284
285static const struct usb_phy_data dra7x_usb2_data = {
286 .label = "dra7x_usb2",
287 .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
288 .mask = OMAP_DEV_PHY_PD,
289 .power_off = OMAP_DEV_PHY_PD,
290};
291
292static const struct usb_phy_data dra7x_usb2_phy2_data = {
293 .label = "dra7x_usb2_phy2",
294 .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
295 .mask = OMAP_USB2_PHY_PD,
296 .power_off = OMAP_USB2_PHY_PD,
297};
298
299static const struct usb_phy_data am437x_usb2_data = {
300 .label = "am437x_usb2",
301 .flags = 0,
302 .mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD |
303 AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
304 .power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
305 .power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD,
306};
307
308static const struct usb_phy_data am654_usb2_data = {
309 .label = "am654_usb2",
310 .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
311 .mask = AM654_USB2_OTG_PD | AM654_USB2_VBUS_DET_EN |
312 AM654_USB2_VBUSVALID_DET_EN,
313 .power_on = AM654_USB2_VBUS_DET_EN | AM654_USB2_VBUSVALID_DET_EN,
314 .power_off = AM654_USB2_OTG_PD,
315};
316
317static const struct of_device_id omap_usb2_id_table[] = {
318 {
319 .compatible = "ti,omap-usb2",
320 .data = &omap_usb2_data,
321 },
322 {
323 .compatible = "ti,omap5-usb2",
324 .data = &omap5_usb2_data,
325 },
326 {
327 .compatible = "ti,dra7x-usb2",
328 .data = &dra7x_usb2_data,
329 },
330 {
331 .compatible = "ti,dra7x-usb2-phy2",
332 .data = &dra7x_usb2_phy2_data,
333 },
334 {
335 .compatible = "ti,am437x-usb2",
336 .data = &am437x_usb2_data,
337 },
338 {
339 .compatible = "ti,am654-usb2",
340 .data = &am654_usb2_data,
341 },
342 {},
343};
344MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
345
346static void omap_usb2_init_errata(struct omap_usb *phy)
347{
348 static const struct soc_device_attribute am65x_sr10_soc_devices[] = {
349 { .family = "AM65X", .revision = "SR1.0" },
350 { /* sentinel */ }
351 };
352
353 /*
354 * Errata i2075: USB2PHY: USB2PHY Charger Detect is Enabled by
355 * Default Without VBUS Presence.
356 *
357 * AM654x SR1.0 has a silicon bug due to which D+ is pulled high after
358 * POR, which could cause enumeration failure with some USB hubs.
359 * Disabling the USB2_PHY Charger Detect function will put D+
360 * into the normal state.
361 */
362 if (soc_device_match(am65x_sr10_soc_devices))
363 phy->flags |= OMAP_USB2_DISABLE_CHRG_DET;
364}
365
366static int omap_usb2_probe(struct platform_device *pdev)
367{
368 struct omap_usb *phy;
369 struct phy *generic_phy;
370 struct phy_provider *phy_provider;
371 struct usb_otg *otg;
372 struct device_node *node = pdev->dev.of_node;
373 struct device_node *control_node;
374 struct platform_device *control_pdev;
375 const struct usb_phy_data *phy_data;
376
377 phy_data = device_get_match_data(&pdev->dev);
378 if (!phy_data)
379 return -EINVAL;
380
381 phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
382 if (!phy)
383 return -ENOMEM;
384
385 otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
386 if (!otg)
387 return -ENOMEM;
388
389 phy->dev = &pdev->dev;
390
391 phy->phy.dev = phy->dev;
392 phy->phy.label = phy_data->label;
393 phy->phy.otg = otg;
394 phy->phy.type = USB_PHY_TYPE_USB2;
395 phy->mask = phy_data->mask;
396 phy->power_on = phy_data->power_on;
397 phy->power_off = phy_data->power_off;
398 phy->flags = phy_data->flags;
399
400 omap_usb2_init_errata(phy);
401
402 phy->phy_base = devm_platform_ioremap_resource(pdev, 0);
403 if (IS_ERR(phy->phy_base))
404 return PTR_ERR(phy->phy_base);
405
406 phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
407 "syscon-phy-power");
408 if (IS_ERR(phy->syscon_phy_power)) {
409 dev_dbg(&pdev->dev,
410 "can't get syscon-phy-power, using control device\n");
411 phy->syscon_phy_power = NULL;
412
413 control_node = of_parse_phandle(node, "ctrl-module", 0);
414 if (!control_node) {
415 dev_err(&pdev->dev,
416 "Failed to get control device phandle\n");
417 return -EINVAL;
418 }
419
420 control_pdev = of_find_device_by_node(control_node);
421 if (!control_pdev) {
422 dev_err(&pdev->dev, "Failed to get control device\n");
423 return -EINVAL;
424 }
425 phy->control_dev = &control_pdev->dev;
426 } else {
427 if (of_property_read_u32_index(node,
428 "syscon-phy-power", 1,
429 &phy->power_reg)) {
430 dev_err(&pdev->dev,
431 "couldn't get power reg. offset\n");
432 return -EINVAL;
433 }
434 }
435
436 phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
437 if (IS_ERR(phy->wkupclk)) {
438 if (PTR_ERR(phy->wkupclk) == -EPROBE_DEFER)
439 return -EPROBE_DEFER;
440
441 dev_warn(&pdev->dev, "unable to get wkupclk %ld, trying old name\n",
442 PTR_ERR(phy->wkupclk));
443 phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
444
445 if (IS_ERR(phy->wkupclk))
446 return dev_err_probe(&pdev->dev, PTR_ERR(phy->wkupclk),
447 "unable to get usb_phy_cm_clk32k\n");
448
449 dev_warn(&pdev->dev,
450 "found usb_phy_cm_clk32k, please fix DTS\n");
451 }
452
453 phy->optclk = devm_clk_get(phy->dev, "refclk");
454 if (IS_ERR(phy->optclk)) {
455 if (PTR_ERR(phy->optclk) == -EPROBE_DEFER)
456 return -EPROBE_DEFER;
457
458 dev_dbg(&pdev->dev, "unable to get refclk, trying old name\n");
459 phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
460
461 if (IS_ERR(phy->optclk)) {
462 if (PTR_ERR(phy->optclk) != -EPROBE_DEFER) {
463 dev_dbg(&pdev->dev,
464 "unable to get usb_otg_ss_refclk960m\n");
465 }
466 } else {
467 dev_warn(&pdev->dev,
468 "found usb_otg_ss_refclk960m, please fix DTS\n");
469 }
470 }
471
472 otg->set_host = omap_usb_set_host;
473 otg->set_peripheral = omap_usb_set_peripheral;
474 if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
475 otg->set_vbus = omap_usb_set_vbus;
476 if (phy_data->flags & OMAP_USB2_HAS_START_SRP)
477 otg->start_srp = omap_usb_start_srp;
478 otg->usb_phy = &phy->phy;
479
480 platform_set_drvdata(pdev, phy);
481 pm_runtime_enable(phy->dev);
482
483 generic_phy = devm_phy_create(phy->dev, NULL, &ops);
484 if (IS_ERR(generic_phy)) {
485 pm_runtime_disable(phy->dev);
486 return PTR_ERR(generic_phy);
487 }
488
489 phy_set_drvdata(generic_phy, phy);
490 omap_usb_power_off(generic_phy);
491
492 phy_provider = devm_of_phy_provider_register(phy->dev,
493 of_phy_simple_xlate);
494 if (IS_ERR(phy_provider)) {
495 pm_runtime_disable(phy->dev);
496 return PTR_ERR(phy_provider);
497 }
498
499 usb_add_phy_dev(&phy->phy);
500
501 return 0;
502}
503
504static void omap_usb2_remove(struct platform_device *pdev)
505{
506 struct omap_usb *phy = platform_get_drvdata(pdev);
507
508 usb_remove_phy(&phy->phy);
509 pm_runtime_disable(phy->dev);
510}
511
512static struct platform_driver omap_usb2_driver = {
513 .probe = omap_usb2_probe,
514 .remove_new = omap_usb2_remove,
515 .driver = {
516 .name = "omap-usb2",
517 .of_match_table = omap_usb2_id_table,
518 },
519};
520
521module_platform_driver(omap_usb2_driver);
522
523MODULE_ALIAS("platform:omap_usb2");
524MODULE_AUTHOR("Texas Instruments Inc.");
525MODULE_DESCRIPTION("OMAP USB2 phy driver");
526MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * omap-usb2.c - USB PHY, talking to musb controller in OMAP.
4 *
5 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
6 * Author: Kishon Vijay Abraham I <kishon@ti.com>
7 */
8
9#include <linux/module.h>
10#include <linux/platform_device.h>
11#include <linux/slab.h>
12#include <linux/of.h>
13#include <linux/io.h>
14#include <linux/phy/omap_usb.h>
15#include <linux/usb/phy_companion.h>
16#include <linux/clk.h>
17#include <linux/err.h>
18#include <linux/pm_runtime.h>
19#include <linux/delay.h>
20#include <linux/phy/omap_control_phy.h>
21#include <linux/phy/phy.h>
22#include <linux/mfd/syscon.h>
23#include <linux/regmap.h>
24#include <linux/of_platform.h>
25
26#define USB2PHY_DISCON_BYP_LATCH (1 << 31)
27#define USB2PHY_ANA_CONFIG1 0x4c
28
29#define AM654_USB2_OTG_PD BIT(8)
30#define AM654_USB2_VBUS_DET_EN BIT(5)
31#define AM654_USB2_VBUSVALID_DET_EN BIT(4)
32
33/**
34 * omap_usb2_set_comparator - links the comparator present in the sytem with
35 * this phy
36 * @comparator - the companion phy(comparator) for this phy
37 *
38 * The phy companion driver should call this API passing the phy_companion
39 * filled with set_vbus and start_srp to be used by usb phy.
40 *
41 * For use by phy companion driver
42 */
43int omap_usb2_set_comparator(struct phy_companion *comparator)
44{
45 struct omap_usb *phy;
46 struct usb_phy *x = usb_get_phy(USB_PHY_TYPE_USB2);
47
48 if (IS_ERR(x))
49 return -ENODEV;
50
51 phy = phy_to_omapusb(x);
52 phy->comparator = comparator;
53 return 0;
54}
55EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
56
57static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
58{
59 struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
60
61 if (!phy->comparator)
62 return -ENODEV;
63
64 return phy->comparator->set_vbus(phy->comparator, enabled);
65}
66
67static int omap_usb_start_srp(struct usb_otg *otg)
68{
69 struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
70
71 if (!phy->comparator)
72 return -ENODEV;
73
74 return phy->comparator->start_srp(phy->comparator);
75}
76
77static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
78{
79 otg->host = host;
80 if (!host)
81 otg->state = OTG_STATE_UNDEFINED;
82
83 return 0;
84}
85
86static int omap_usb_set_peripheral(struct usb_otg *otg,
87 struct usb_gadget *gadget)
88{
89 otg->gadget = gadget;
90 if (!gadget)
91 otg->state = OTG_STATE_UNDEFINED;
92
93 return 0;
94}
95
96static int omap_usb_phy_power(struct omap_usb *phy, int on)
97{
98 u32 val;
99 int ret;
100
101 if (!phy->syscon_phy_power) {
102 omap_control_phy_power(phy->control_dev, on);
103 return 0;
104 }
105
106 if (on)
107 val = phy->power_on;
108 else
109 val = phy->power_off;
110
111 ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg,
112 phy->mask, val);
113 return ret;
114}
115
116static int omap_usb_power_off(struct phy *x)
117{
118 struct omap_usb *phy = phy_get_drvdata(x);
119
120 return omap_usb_phy_power(phy, false);
121}
122
123static int omap_usb_power_on(struct phy *x)
124{
125 struct omap_usb *phy = phy_get_drvdata(x);
126
127 return omap_usb_phy_power(phy, true);
128}
129
130static int omap_usb2_disable_clocks(struct omap_usb *phy)
131{
132 clk_disable_unprepare(phy->wkupclk);
133 if (!IS_ERR(phy->optclk))
134 clk_disable_unprepare(phy->optclk);
135
136 return 0;
137}
138
139static int omap_usb2_enable_clocks(struct omap_usb *phy)
140{
141 int ret;
142
143 ret = clk_prepare_enable(phy->wkupclk);
144 if (ret < 0) {
145 dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
146 goto err0;
147 }
148
149 if (!IS_ERR(phy->optclk)) {
150 ret = clk_prepare_enable(phy->optclk);
151 if (ret < 0) {
152 dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
153 goto err1;
154 }
155 }
156
157 return 0;
158
159err1:
160 clk_disable(phy->wkupclk);
161
162err0:
163 return ret;
164}
165
166static int omap_usb_init(struct phy *x)
167{
168 struct omap_usb *phy = phy_get_drvdata(x);
169 u32 val;
170
171 omap_usb2_enable_clocks(phy);
172
173 if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
174 /*
175 *
176 * Reduce the sensitivity of internal PHY by enabling the
177 * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This
178 * resolves issues with certain devices which can otherwise
179 * be prone to false disconnects.
180 *
181 */
182 val = omap_usb_readl(phy->phy_base, USB2PHY_ANA_CONFIG1);
183 val |= USB2PHY_DISCON_BYP_LATCH;
184 omap_usb_writel(phy->phy_base, USB2PHY_ANA_CONFIG1, val);
185 }
186
187 return 0;
188}
189
190static int omap_usb_exit(struct phy *x)
191{
192 struct omap_usb *phy = phy_get_drvdata(x);
193
194 return omap_usb2_disable_clocks(phy);
195}
196
197static const struct phy_ops ops = {
198 .init = omap_usb_init,
199 .exit = omap_usb_exit,
200 .power_on = omap_usb_power_on,
201 .power_off = omap_usb_power_off,
202 .owner = THIS_MODULE,
203};
204
205static const struct usb_phy_data omap_usb2_data = {
206 .label = "omap_usb2",
207 .flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
208 .mask = OMAP_DEV_PHY_PD,
209 .power_off = OMAP_DEV_PHY_PD,
210};
211
212static const struct usb_phy_data omap5_usb2_data = {
213 .label = "omap5_usb2",
214 .flags = 0,
215 .mask = OMAP_DEV_PHY_PD,
216 .power_off = OMAP_DEV_PHY_PD,
217};
218
219static const struct usb_phy_data dra7x_usb2_data = {
220 .label = "dra7x_usb2",
221 .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
222 .mask = OMAP_DEV_PHY_PD,
223 .power_off = OMAP_DEV_PHY_PD,
224};
225
226static const struct usb_phy_data dra7x_usb2_phy2_data = {
227 .label = "dra7x_usb2_phy2",
228 .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
229 .mask = OMAP_USB2_PHY_PD,
230 .power_off = OMAP_USB2_PHY_PD,
231};
232
233static const struct usb_phy_data am437x_usb2_data = {
234 .label = "am437x_usb2",
235 .flags = 0,
236 .mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD |
237 AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
238 .power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
239 .power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD,
240};
241
242static const struct usb_phy_data am654_usb2_data = {
243 .label = "am654_usb2",
244 .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
245 .mask = AM654_USB2_OTG_PD | AM654_USB2_VBUS_DET_EN |
246 AM654_USB2_VBUSVALID_DET_EN,
247 .power_on = AM654_USB2_VBUS_DET_EN | AM654_USB2_VBUSVALID_DET_EN,
248 .power_off = AM654_USB2_OTG_PD,
249};
250
251static const struct of_device_id omap_usb2_id_table[] = {
252 {
253 .compatible = "ti,omap-usb2",
254 .data = &omap_usb2_data,
255 },
256 {
257 .compatible = "ti,omap5-usb2",
258 .data = &omap5_usb2_data,
259 },
260 {
261 .compatible = "ti,dra7x-usb2",
262 .data = &dra7x_usb2_data,
263 },
264 {
265 .compatible = "ti,dra7x-usb2-phy2",
266 .data = &dra7x_usb2_phy2_data,
267 },
268 {
269 .compatible = "ti,am437x-usb2",
270 .data = &am437x_usb2_data,
271 },
272 {
273 .compatible = "ti,am654-usb2",
274 .data = &am654_usb2_data,
275 },
276 {},
277};
278MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
279
280static int omap_usb2_probe(struct platform_device *pdev)
281{
282 struct omap_usb *phy;
283 struct phy *generic_phy;
284 struct resource *res;
285 struct phy_provider *phy_provider;
286 struct usb_otg *otg;
287 struct device_node *node = pdev->dev.of_node;
288 struct device_node *control_node;
289 struct platform_device *control_pdev;
290 const struct of_device_id *of_id;
291 struct usb_phy_data *phy_data;
292
293 of_id = of_match_device(omap_usb2_id_table, &pdev->dev);
294
295 if (!of_id)
296 return -EINVAL;
297
298 phy_data = (struct usb_phy_data *)of_id->data;
299
300 phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
301 if (!phy)
302 return -ENOMEM;
303
304 otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
305 if (!otg)
306 return -ENOMEM;
307
308 phy->dev = &pdev->dev;
309
310 phy->phy.dev = phy->dev;
311 phy->phy.label = phy_data->label;
312 phy->phy.otg = otg;
313 phy->phy.type = USB_PHY_TYPE_USB2;
314 phy->mask = phy_data->mask;
315 phy->power_on = phy_data->power_on;
316 phy->power_off = phy_data->power_off;
317
318 if (phy_data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
319 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
320 phy->phy_base = devm_ioremap_resource(&pdev->dev, res);
321 if (IS_ERR(phy->phy_base))
322 return PTR_ERR(phy->phy_base);
323 phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT;
324 }
325
326 phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
327 "syscon-phy-power");
328 if (IS_ERR(phy->syscon_phy_power)) {
329 dev_dbg(&pdev->dev,
330 "can't get syscon-phy-power, using control device\n");
331 phy->syscon_phy_power = NULL;
332
333 control_node = of_parse_phandle(node, "ctrl-module", 0);
334 if (!control_node) {
335 dev_err(&pdev->dev,
336 "Failed to get control device phandle\n");
337 return -EINVAL;
338 }
339
340 control_pdev = of_find_device_by_node(control_node);
341 if (!control_pdev) {
342 dev_err(&pdev->dev, "Failed to get control device\n");
343 return -EINVAL;
344 }
345 phy->control_dev = &control_pdev->dev;
346 } else {
347 if (of_property_read_u32_index(node,
348 "syscon-phy-power", 1,
349 &phy->power_reg)) {
350 dev_err(&pdev->dev,
351 "couldn't get power reg. offset\n");
352 return -EINVAL;
353 }
354 }
355
356
357 phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
358 if (IS_ERR(phy->wkupclk)) {
359 if (PTR_ERR(phy->wkupclk) == -EPROBE_DEFER)
360 return -EPROBE_DEFER;
361
362 dev_warn(&pdev->dev, "unable to get wkupclk %ld, trying old name\n",
363 PTR_ERR(phy->wkupclk));
364 phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
365
366 if (IS_ERR(phy->wkupclk)) {
367 if (PTR_ERR(phy->wkupclk) != -EPROBE_DEFER)
368 dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
369 return PTR_ERR(phy->wkupclk);
370 } else {
371 dev_warn(&pdev->dev,
372 "found usb_phy_cm_clk32k, please fix DTS\n");
373 }
374 }
375
376 phy->optclk = devm_clk_get(phy->dev, "refclk");
377 if (IS_ERR(phy->optclk)) {
378 if (PTR_ERR(phy->optclk) == -EPROBE_DEFER)
379 return -EPROBE_DEFER;
380
381 dev_dbg(&pdev->dev, "unable to get refclk, trying old name\n");
382 phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
383
384 if (IS_ERR(phy->optclk)) {
385 if (PTR_ERR(phy->optclk) != -EPROBE_DEFER) {
386 dev_dbg(&pdev->dev,
387 "unable to get usb_otg_ss_refclk960m\n");
388 }
389 } else {
390 dev_warn(&pdev->dev,
391 "found usb_otg_ss_refclk960m, please fix DTS\n");
392 }
393 }
394
395 otg->set_host = omap_usb_set_host;
396 otg->set_peripheral = omap_usb_set_peripheral;
397 if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
398 otg->set_vbus = omap_usb_set_vbus;
399 if (phy_data->flags & OMAP_USB2_HAS_START_SRP)
400 otg->start_srp = omap_usb_start_srp;
401 otg->usb_phy = &phy->phy;
402
403 platform_set_drvdata(pdev, phy);
404 pm_runtime_enable(phy->dev);
405
406 generic_phy = devm_phy_create(phy->dev, NULL, &ops);
407 if (IS_ERR(generic_phy)) {
408 pm_runtime_disable(phy->dev);
409 return PTR_ERR(generic_phy);
410 }
411
412 phy_set_drvdata(generic_phy, phy);
413 omap_usb_power_off(generic_phy);
414
415 phy_provider = devm_of_phy_provider_register(phy->dev,
416 of_phy_simple_xlate);
417 if (IS_ERR(phy_provider)) {
418 pm_runtime_disable(phy->dev);
419 return PTR_ERR(phy_provider);
420 }
421
422
423 usb_add_phy_dev(&phy->phy);
424
425 return 0;
426}
427
428static int omap_usb2_remove(struct platform_device *pdev)
429{
430 struct omap_usb *phy = platform_get_drvdata(pdev);
431
432 usb_remove_phy(&phy->phy);
433 pm_runtime_disable(phy->dev);
434
435 return 0;
436}
437
438static struct platform_driver omap_usb2_driver = {
439 .probe = omap_usb2_probe,
440 .remove = omap_usb2_remove,
441 .driver = {
442 .name = "omap-usb2",
443 .of_match_table = omap_usb2_id_table,
444 },
445};
446
447module_platform_driver(omap_usb2_driver);
448
449MODULE_ALIAS("platform:omap_usb2");
450MODULE_AUTHOR("Texas Instruments Inc.");
451MODULE_DESCRIPTION("OMAP USB2 phy driver");
452MODULE_LICENSE("GPL v2");