Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/* Framework for finding and configuring PHYs.
3 * Also contains generic PHY driver
4 *
5 * Author: Andy Fleming
6 *
7 * Copyright (c) 2004 Freescale Semiconductor, Inc.
8 */
9
10#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
11
12#include <linux/acpi.h>
13#include <linux/bitmap.h>
14#include <linux/delay.h>
15#include <linux/errno.h>
16#include <linux/etherdevice.h>
17#include <linux/ethtool.h>
18#include <linux/init.h>
19#include <linux/interrupt.h>
20#include <linux/io.h>
21#include <linux/kernel.h>
22#include <linux/list.h>
23#include <linux/mdio.h>
24#include <linux/mii.h>
25#include <linux/mm.h>
26#include <linux/module.h>
27#include <linux/of.h>
28#include <linux/netdevice.h>
29#include <linux/phy.h>
30#include <linux/phylib_stubs.h>
31#include <linux/phy_led_triggers.h>
32#include <linux/pse-pd/pse.h>
33#include <linux/property.h>
34#include <linux/rtnetlink.h>
35#include <linux/sfp.h>
36#include <linux/skbuff.h>
37#include <linux/slab.h>
38#include <linux/string.h>
39#include <linux/uaccess.h>
40#include <linux/unistd.h>
41
42MODULE_DESCRIPTION("PHY library");
43MODULE_AUTHOR("Andy Fleming");
44MODULE_LICENSE("GPL");
45
46__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init;
47EXPORT_SYMBOL_GPL(phy_basic_features);
48
49__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init;
50EXPORT_SYMBOL_GPL(phy_basic_t1_features);
51
52__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1s_p2mp_features) __ro_after_init;
53EXPORT_SYMBOL_GPL(phy_basic_t1s_p2mp_features);
54
55__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init;
56EXPORT_SYMBOL_GPL(phy_gbit_features);
57
58__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init;
59EXPORT_SYMBOL_GPL(phy_gbit_fibre_features);
60
61__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_init;
62EXPORT_SYMBOL_GPL(phy_gbit_all_ports_features);
63
64__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init;
65EXPORT_SYMBOL_GPL(phy_10gbit_features);
66
67__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_fec_features) __ro_after_init;
68EXPORT_SYMBOL_GPL(phy_10gbit_fec_features);
69
70const int phy_basic_ports_array[3] = {
71 ETHTOOL_LINK_MODE_Autoneg_BIT,
72 ETHTOOL_LINK_MODE_TP_BIT,
73 ETHTOOL_LINK_MODE_MII_BIT,
74};
75EXPORT_SYMBOL_GPL(phy_basic_ports_array);
76
77const int phy_fibre_port_array[1] = {
78 ETHTOOL_LINK_MODE_FIBRE_BIT,
79};
80EXPORT_SYMBOL_GPL(phy_fibre_port_array);
81
82const int phy_all_ports_features_array[7] = {
83 ETHTOOL_LINK_MODE_Autoneg_BIT,
84 ETHTOOL_LINK_MODE_TP_BIT,
85 ETHTOOL_LINK_MODE_MII_BIT,
86 ETHTOOL_LINK_MODE_FIBRE_BIT,
87 ETHTOOL_LINK_MODE_AUI_BIT,
88 ETHTOOL_LINK_MODE_BNC_BIT,
89 ETHTOOL_LINK_MODE_Backplane_BIT,
90};
91EXPORT_SYMBOL_GPL(phy_all_ports_features_array);
92
93const int phy_10_100_features_array[4] = {
94 ETHTOOL_LINK_MODE_10baseT_Half_BIT,
95 ETHTOOL_LINK_MODE_10baseT_Full_BIT,
96 ETHTOOL_LINK_MODE_100baseT_Half_BIT,
97 ETHTOOL_LINK_MODE_100baseT_Full_BIT,
98};
99EXPORT_SYMBOL_GPL(phy_10_100_features_array);
100
101const int phy_basic_t1_features_array[3] = {
102 ETHTOOL_LINK_MODE_TP_BIT,
103 ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
104 ETHTOOL_LINK_MODE_100baseT1_Full_BIT,
105};
106EXPORT_SYMBOL_GPL(phy_basic_t1_features_array);
107
108const int phy_basic_t1s_p2mp_features_array[2] = {
109 ETHTOOL_LINK_MODE_TP_BIT,
110 ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT,
111};
112EXPORT_SYMBOL_GPL(phy_basic_t1s_p2mp_features_array);
113
114const int phy_gbit_features_array[2] = {
115 ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
116 ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
117};
118EXPORT_SYMBOL_GPL(phy_gbit_features_array);
119
120const int phy_10gbit_features_array[1] = {
121 ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
122};
123EXPORT_SYMBOL_GPL(phy_10gbit_features_array);
124
125static const int phy_10gbit_fec_features_array[1] = {
126 ETHTOOL_LINK_MODE_10000baseR_FEC_BIT,
127};
128
129__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init;
130EXPORT_SYMBOL_GPL(phy_10gbit_full_features);
131
132static const int phy_10gbit_full_features_array[] = {
133 ETHTOOL_LINK_MODE_10baseT_Full_BIT,
134 ETHTOOL_LINK_MODE_100baseT_Full_BIT,
135 ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
136 ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
137};
138
139static const int phy_eee_cap1_features_array[] = {
140 ETHTOOL_LINK_MODE_100baseT_Full_BIT,
141 ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
142 ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
143 ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
144 ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
145 ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
146};
147
148__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_eee_cap1_features) __ro_after_init;
149EXPORT_SYMBOL_GPL(phy_eee_cap1_features);
150
151static void features_init(void)
152{
153 /* 10/100 half/full*/
154 linkmode_set_bit_array(phy_basic_ports_array,
155 ARRAY_SIZE(phy_basic_ports_array),
156 phy_basic_features);
157 linkmode_set_bit_array(phy_10_100_features_array,
158 ARRAY_SIZE(phy_10_100_features_array),
159 phy_basic_features);
160
161 /* 100 full, TP */
162 linkmode_set_bit_array(phy_basic_t1_features_array,
163 ARRAY_SIZE(phy_basic_t1_features_array),
164 phy_basic_t1_features);
165
166 /* 10 half, P2MP, TP */
167 linkmode_set_bit_array(phy_basic_t1s_p2mp_features_array,
168 ARRAY_SIZE(phy_basic_t1s_p2mp_features_array),
169 phy_basic_t1s_p2mp_features);
170
171 /* 10/100 half/full + 1000 half/full */
172 linkmode_set_bit_array(phy_basic_ports_array,
173 ARRAY_SIZE(phy_basic_ports_array),
174 phy_gbit_features);
175 linkmode_set_bit_array(phy_10_100_features_array,
176 ARRAY_SIZE(phy_10_100_features_array),
177 phy_gbit_features);
178 linkmode_set_bit_array(phy_gbit_features_array,
179 ARRAY_SIZE(phy_gbit_features_array),
180 phy_gbit_features);
181
182 /* 10/100 half/full + 1000 half/full + fibre*/
183 linkmode_set_bit_array(phy_basic_ports_array,
184 ARRAY_SIZE(phy_basic_ports_array),
185 phy_gbit_fibre_features);
186 linkmode_set_bit_array(phy_10_100_features_array,
187 ARRAY_SIZE(phy_10_100_features_array),
188 phy_gbit_fibre_features);
189 linkmode_set_bit_array(phy_gbit_features_array,
190 ARRAY_SIZE(phy_gbit_features_array),
191 phy_gbit_fibre_features);
192 linkmode_set_bit_array(phy_fibre_port_array,
193 ARRAY_SIZE(phy_fibre_port_array),
194 phy_gbit_fibre_features);
195
196 /* 10/100 half/full + 1000 half/full + TP/MII/FIBRE/AUI/BNC/Backplane*/
197 linkmode_set_bit_array(phy_all_ports_features_array,
198 ARRAY_SIZE(phy_all_ports_features_array),
199 phy_gbit_all_ports_features);
200 linkmode_set_bit_array(phy_10_100_features_array,
201 ARRAY_SIZE(phy_10_100_features_array),
202 phy_gbit_all_ports_features);
203 linkmode_set_bit_array(phy_gbit_features_array,
204 ARRAY_SIZE(phy_gbit_features_array),
205 phy_gbit_all_ports_features);
206
207 /* 10/100 half/full + 1000 half/full + 10G full*/
208 linkmode_set_bit_array(phy_all_ports_features_array,
209 ARRAY_SIZE(phy_all_ports_features_array),
210 phy_10gbit_features);
211 linkmode_set_bit_array(phy_10_100_features_array,
212 ARRAY_SIZE(phy_10_100_features_array),
213 phy_10gbit_features);
214 linkmode_set_bit_array(phy_gbit_features_array,
215 ARRAY_SIZE(phy_gbit_features_array),
216 phy_10gbit_features);
217 linkmode_set_bit_array(phy_10gbit_features_array,
218 ARRAY_SIZE(phy_10gbit_features_array),
219 phy_10gbit_features);
220
221 /* 10/100/1000/10G full */
222 linkmode_set_bit_array(phy_all_ports_features_array,
223 ARRAY_SIZE(phy_all_ports_features_array),
224 phy_10gbit_full_features);
225 linkmode_set_bit_array(phy_10gbit_full_features_array,
226 ARRAY_SIZE(phy_10gbit_full_features_array),
227 phy_10gbit_full_features);
228 /* 10G FEC only */
229 linkmode_set_bit_array(phy_10gbit_fec_features_array,
230 ARRAY_SIZE(phy_10gbit_fec_features_array),
231 phy_10gbit_fec_features);
232 linkmode_set_bit_array(phy_eee_cap1_features_array,
233 ARRAY_SIZE(phy_eee_cap1_features_array),
234 phy_eee_cap1_features);
235
236}
237
238void phy_device_free(struct phy_device *phydev)
239{
240 put_device(&phydev->mdio.dev);
241}
242EXPORT_SYMBOL(phy_device_free);
243
244static void phy_mdio_device_free(struct mdio_device *mdiodev)
245{
246 struct phy_device *phydev;
247
248 phydev = container_of(mdiodev, struct phy_device, mdio);
249 phy_device_free(phydev);
250}
251
252static void phy_device_release(struct device *dev)
253{
254 fwnode_handle_put(dev->fwnode);
255 kfree(to_phy_device(dev));
256}
257
258static void phy_mdio_device_remove(struct mdio_device *mdiodev)
259{
260 struct phy_device *phydev;
261
262 phydev = container_of(mdiodev, struct phy_device, mdio);
263 phy_device_remove(phydev);
264}
265
266static struct phy_driver genphy_driver;
267
268static LIST_HEAD(phy_fixup_list);
269static DEFINE_MUTEX(phy_fixup_lock);
270
271static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
272{
273 struct device_driver *drv = phydev->mdio.dev.driver;
274 struct phy_driver *phydrv = to_phy_driver(drv);
275 struct net_device *netdev = phydev->attached_dev;
276
277 if (!drv || !phydrv->suspend)
278 return false;
279
280 /* PHY not attached? May suspend if the PHY has not already been
281 * suspended as part of a prior call to phy_disconnect() ->
282 * phy_detach() -> phy_suspend() because the parent netdev might be the
283 * MDIO bus driver and clock gated at this point.
284 */
285 if (!netdev)
286 goto out;
287
288 if (netdev->wol_enabled)
289 return false;
290
291 /* As long as not all affected network drivers support the
292 * wol_enabled flag, let's check for hints that WoL is enabled.
293 * Don't suspend PHY if the attached netdev parent may wake up.
294 * The parent may point to a PCI device, as in tg3 driver.
295 */
296 if (netdev->dev.parent && device_may_wakeup(netdev->dev.parent))
297 return false;
298
299 /* Also don't suspend PHY if the netdev itself may wakeup. This
300 * is the case for devices w/o underlaying pwr. mgmt. aware bus,
301 * e.g. SoC devices.
302 */
303 if (device_may_wakeup(&netdev->dev))
304 return false;
305
306out:
307 return !phydev->suspended;
308}
309
310static __maybe_unused int mdio_bus_phy_suspend(struct device *dev)
311{
312 struct phy_device *phydev = to_phy_device(dev);
313
314 if (phydev->mac_managed_pm)
315 return 0;
316
317 /* Wakeup interrupts may occur during the system sleep transition when
318 * the PHY is inaccessible. Set flag to postpone handling until the PHY
319 * has resumed. Wait for concurrent interrupt handler to complete.
320 */
321 if (phy_interrupt_is_valid(phydev)) {
322 phydev->irq_suspended = 1;
323 synchronize_irq(phydev->irq);
324 }
325
326 /* We must stop the state machine manually, otherwise it stops out of
327 * control, possibly with the phydev->lock held. Upon resume, netdev
328 * may call phy routines that try to grab the same lock, and that may
329 * lead to a deadlock.
330 */
331 if (phydev->attached_dev && phydev->adjust_link)
332 phy_stop_machine(phydev);
333
334 if (!mdio_bus_phy_may_suspend(phydev))
335 return 0;
336
337 phydev->suspended_by_mdio_bus = 1;
338
339 return phy_suspend(phydev);
340}
341
342static __maybe_unused int mdio_bus_phy_resume(struct device *dev)
343{
344 struct phy_device *phydev = to_phy_device(dev);
345 int ret;
346
347 if (phydev->mac_managed_pm)
348 return 0;
349
350 if (!phydev->suspended_by_mdio_bus)
351 goto no_resume;
352
353 phydev->suspended_by_mdio_bus = 0;
354
355 /* If we managed to get here with the PHY state machine in a state
356 * neither PHY_HALTED, PHY_READY nor PHY_UP, this is an indication
357 * that something went wrong and we should most likely be using
358 * MAC managed PM, but we are not.
359 */
360 WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
361 phydev->state != PHY_UP);
362
363 ret = phy_init_hw(phydev);
364 if (ret < 0)
365 return ret;
366
367 ret = phy_resume(phydev);
368 if (ret < 0)
369 return ret;
370no_resume:
371 if (phy_interrupt_is_valid(phydev)) {
372 phydev->irq_suspended = 0;
373 synchronize_irq(phydev->irq);
374
375 /* Rerun interrupts which were postponed by phy_interrupt()
376 * because they occurred during the system sleep transition.
377 */
378 if (phydev->irq_rerun) {
379 phydev->irq_rerun = 0;
380 enable_irq(phydev->irq);
381 irq_wake_thread(phydev->irq, phydev);
382 }
383 }
384
385 if (phydev->attached_dev && phydev->adjust_link)
386 phy_start_machine(phydev);
387
388 return 0;
389}
390
391static SIMPLE_DEV_PM_OPS(mdio_bus_phy_pm_ops, mdio_bus_phy_suspend,
392 mdio_bus_phy_resume);
393
394/**
395 * phy_register_fixup - creates a new phy_fixup and adds it to the list
396 * @bus_id: A string which matches phydev->mdio.dev.bus_id (or PHY_ANY_ID)
397 * @phy_uid: Used to match against phydev->phy_id (the UID of the PHY)
398 * It can also be PHY_ANY_UID
399 * @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before
400 * comparison
401 * @run: The actual code to be run when a matching PHY is found
402 */
403int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
404 int (*run)(struct phy_device *))
405{
406 struct phy_fixup *fixup = kzalloc(sizeof(*fixup), GFP_KERNEL);
407
408 if (!fixup)
409 return -ENOMEM;
410
411 strscpy(fixup->bus_id, bus_id, sizeof(fixup->bus_id));
412 fixup->phy_uid = phy_uid;
413 fixup->phy_uid_mask = phy_uid_mask;
414 fixup->run = run;
415
416 mutex_lock(&phy_fixup_lock);
417 list_add_tail(&fixup->list, &phy_fixup_list);
418 mutex_unlock(&phy_fixup_lock);
419
420 return 0;
421}
422EXPORT_SYMBOL(phy_register_fixup);
423
424/* Registers a fixup to be run on any PHY with the UID in phy_uid */
425int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
426 int (*run)(struct phy_device *))
427{
428 return phy_register_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask, run);
429}
430EXPORT_SYMBOL(phy_register_fixup_for_uid);
431
432/* Registers a fixup to be run on the PHY with id string bus_id */
433int phy_register_fixup_for_id(const char *bus_id,
434 int (*run)(struct phy_device *))
435{
436 return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run);
437}
438EXPORT_SYMBOL(phy_register_fixup_for_id);
439
440/**
441 * phy_unregister_fixup - remove a phy_fixup from the list
442 * @bus_id: A string matches fixup->bus_id (or PHY_ANY_ID) in phy_fixup_list
443 * @phy_uid: A phy id matches fixup->phy_id (or PHY_ANY_UID) in phy_fixup_list
444 * @phy_uid_mask: Applied to phy_uid and fixup->phy_uid before comparison
445 */
446int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask)
447{
448 struct list_head *pos, *n;
449 struct phy_fixup *fixup;
450 int ret;
451
452 ret = -ENODEV;
453
454 mutex_lock(&phy_fixup_lock);
455 list_for_each_safe(pos, n, &phy_fixup_list) {
456 fixup = list_entry(pos, struct phy_fixup, list);
457
458 if ((!strcmp(fixup->bus_id, bus_id)) &&
459 phy_id_compare(fixup->phy_uid, phy_uid, phy_uid_mask)) {
460 list_del(&fixup->list);
461 kfree(fixup);
462 ret = 0;
463 break;
464 }
465 }
466 mutex_unlock(&phy_fixup_lock);
467
468 return ret;
469}
470EXPORT_SYMBOL(phy_unregister_fixup);
471
472/* Unregisters a fixup of any PHY with the UID in phy_uid */
473int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask)
474{
475 return phy_unregister_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask);
476}
477EXPORT_SYMBOL(phy_unregister_fixup_for_uid);
478
479/* Unregisters a fixup of the PHY with id string bus_id */
480int phy_unregister_fixup_for_id(const char *bus_id)
481{
482 return phy_unregister_fixup(bus_id, PHY_ANY_UID, 0xffffffff);
483}
484EXPORT_SYMBOL(phy_unregister_fixup_for_id);
485
486/* Returns 1 if fixup matches phydev in bus_id and phy_uid.
487 * Fixups can be set to match any in one or more fields.
488 */
489static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup)
490{
491 if (strcmp(fixup->bus_id, phydev_name(phydev)) != 0)
492 if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0)
493 return 0;
494
495 if (!phy_id_compare(phydev->phy_id, fixup->phy_uid,
496 fixup->phy_uid_mask))
497 if (fixup->phy_uid != PHY_ANY_UID)
498 return 0;
499
500 return 1;
501}
502
503/* Runs any matching fixups for this phydev */
504static int phy_scan_fixups(struct phy_device *phydev)
505{
506 struct phy_fixup *fixup;
507
508 mutex_lock(&phy_fixup_lock);
509 list_for_each_entry(fixup, &phy_fixup_list, list) {
510 if (phy_needs_fixup(phydev, fixup)) {
511 int err = fixup->run(phydev);
512
513 if (err < 0) {
514 mutex_unlock(&phy_fixup_lock);
515 return err;
516 }
517 phydev->has_fixups = true;
518 }
519 }
520 mutex_unlock(&phy_fixup_lock);
521
522 return 0;
523}
524
525static int phy_bus_match(struct device *dev, struct device_driver *drv)
526{
527 struct phy_device *phydev = to_phy_device(dev);
528 struct phy_driver *phydrv = to_phy_driver(drv);
529 const int num_ids = ARRAY_SIZE(phydev->c45_ids.device_ids);
530 int i;
531
532 if (!(phydrv->mdiodrv.flags & MDIO_DEVICE_IS_PHY))
533 return 0;
534
535 if (phydrv->match_phy_device)
536 return phydrv->match_phy_device(phydev);
537
538 if (phydev->is_c45) {
539 for (i = 1; i < num_ids; i++) {
540 if (phydev->c45_ids.device_ids[i] == 0xffffffff)
541 continue;
542
543 if (phy_id_compare(phydev->c45_ids.device_ids[i],
544 phydrv->phy_id, phydrv->phy_id_mask))
545 return 1;
546 }
547 return 0;
548 } else {
549 return phy_id_compare(phydev->phy_id, phydrv->phy_id,
550 phydrv->phy_id_mask);
551 }
552}
553
554static ssize_t
555phy_id_show(struct device *dev, struct device_attribute *attr, char *buf)
556{
557 struct phy_device *phydev = to_phy_device(dev);
558
559 return sysfs_emit(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id);
560}
561static DEVICE_ATTR_RO(phy_id);
562
563static ssize_t
564phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf)
565{
566 struct phy_device *phydev = to_phy_device(dev);
567 const char *mode = NULL;
568
569 if (phy_is_internal(phydev))
570 mode = "internal";
571 else
572 mode = phy_modes(phydev->interface);
573
574 return sysfs_emit(buf, "%s\n", mode);
575}
576static DEVICE_ATTR_RO(phy_interface);
577
578static ssize_t
579phy_has_fixups_show(struct device *dev, struct device_attribute *attr,
580 char *buf)
581{
582 struct phy_device *phydev = to_phy_device(dev);
583
584 return sysfs_emit(buf, "%d\n", phydev->has_fixups);
585}
586static DEVICE_ATTR_RO(phy_has_fixups);
587
588static ssize_t phy_dev_flags_show(struct device *dev,
589 struct device_attribute *attr,
590 char *buf)
591{
592 struct phy_device *phydev = to_phy_device(dev);
593
594 return sysfs_emit(buf, "0x%08x\n", phydev->dev_flags);
595}
596static DEVICE_ATTR_RO(phy_dev_flags);
597
598static struct attribute *phy_dev_attrs[] = {
599 &dev_attr_phy_id.attr,
600 &dev_attr_phy_interface.attr,
601 &dev_attr_phy_has_fixups.attr,
602 &dev_attr_phy_dev_flags.attr,
603 NULL,
604};
605ATTRIBUTE_GROUPS(phy_dev);
606
607static const struct device_type mdio_bus_phy_type = {
608 .name = "PHY",
609 .groups = phy_dev_groups,
610 .release = phy_device_release,
611 .pm = pm_ptr(&mdio_bus_phy_pm_ops),
612};
613
614static int phy_request_driver_module(struct phy_device *dev, u32 phy_id)
615{
616 int ret;
617
618 ret = request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT,
619 MDIO_ID_ARGS(phy_id));
620 /* We only check for failures in executing the usermode binary,
621 * not whether a PHY driver module exists for the PHY ID.
622 * Accept -ENOENT because this may occur in case no initramfs exists,
623 * then modprobe isn't available.
624 */
625 if (IS_ENABLED(CONFIG_MODULES) && ret < 0 && ret != -ENOENT) {
626 phydev_err(dev, "error %d loading PHY driver module for ID 0x%08lx\n",
627 ret, (unsigned long)phy_id);
628 return ret;
629 }
630
631 return 0;
632}
633
634struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
635 bool is_c45,
636 struct phy_c45_device_ids *c45_ids)
637{
638 struct phy_device *dev;
639 struct mdio_device *mdiodev;
640 int ret = 0;
641
642 /* We allocate the device, and initialize the default values */
643 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
644 if (!dev)
645 return ERR_PTR(-ENOMEM);
646
647 mdiodev = &dev->mdio;
648 mdiodev->dev.parent = &bus->dev;
649 mdiodev->dev.bus = &mdio_bus_type;
650 mdiodev->dev.type = &mdio_bus_phy_type;
651 mdiodev->bus = bus;
652 mdiodev->bus_match = phy_bus_match;
653 mdiodev->addr = addr;
654 mdiodev->flags = MDIO_DEVICE_FLAG_PHY;
655 mdiodev->device_free = phy_mdio_device_free;
656 mdiodev->device_remove = phy_mdio_device_remove;
657 mdiodev->reset_state = -1;
658
659 dev->speed = SPEED_UNKNOWN;
660 dev->duplex = DUPLEX_UNKNOWN;
661 dev->pause = 0;
662 dev->asym_pause = 0;
663 dev->link = 0;
664 dev->port = PORT_TP;
665 dev->interface = PHY_INTERFACE_MODE_GMII;
666
667 dev->autoneg = AUTONEG_ENABLE;
668
669 dev->pma_extable = -ENODATA;
670 dev->is_c45 = is_c45;
671 dev->phy_id = phy_id;
672 if (c45_ids)
673 dev->c45_ids = *c45_ids;
674 dev->irq = bus->irq[addr];
675
676 dev_set_name(&mdiodev->dev, PHY_ID_FMT, bus->id, addr);
677 device_initialize(&mdiodev->dev);
678
679 dev->state = PHY_DOWN;
680 INIT_LIST_HEAD(&dev->leds);
681
682 mutex_init(&dev->lock);
683 INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
684
685 /* Request the appropriate module unconditionally; don't
686 * bother trying to do so only if it isn't already loaded,
687 * because that gets complicated. A hotplug event would have
688 * done an unconditional modprobe anyway.
689 * We don't do normal hotplug because it won't work for MDIO
690 * -- because it relies on the device staying around for long
691 * enough for the driver to get loaded. With MDIO, the NIC
692 * driver will get bored and give up as soon as it finds that
693 * there's no driver _already_ loaded.
694 */
695 if (is_c45 && c45_ids) {
696 const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
697 int i;
698
699 for (i = 1; i < num_ids; i++) {
700 if (c45_ids->device_ids[i] == 0xffffffff)
701 continue;
702
703 ret = phy_request_driver_module(dev,
704 c45_ids->device_ids[i]);
705 if (ret)
706 break;
707 }
708 } else {
709 ret = phy_request_driver_module(dev, phy_id);
710 }
711
712 if (ret) {
713 put_device(&mdiodev->dev);
714 dev = ERR_PTR(ret);
715 }
716
717 return dev;
718}
719EXPORT_SYMBOL(phy_device_create);
720
721/* phy_c45_probe_present - checks to see if a MMD is present in the package
722 * @bus: the target MII bus
723 * @prtad: PHY package address on the MII bus
724 * @devad: PHY device (MMD) address
725 *
726 * Read the MDIO_STAT2 register, and check whether a device is responding
727 * at this address.
728 *
729 * Returns: negative error number on bus access error, zero if no device
730 * is responding, or positive if a device is present.
731 */
732static int phy_c45_probe_present(struct mii_bus *bus, int prtad, int devad)
733{
734 int stat2;
735
736 stat2 = mdiobus_c45_read(bus, prtad, devad, MDIO_STAT2);
737 if (stat2 < 0)
738 return stat2;
739
740 return (stat2 & MDIO_STAT2_DEVPRST) == MDIO_STAT2_DEVPRST_VAL;
741}
742
743/* get_phy_c45_devs_in_pkg - reads a MMD's devices in package registers.
744 * @bus: the target MII bus
745 * @addr: PHY address on the MII bus
746 * @dev_addr: MMD address in the PHY.
747 * @devices_in_package: where to store the devices in package information.
748 *
749 * Description: reads devices in package registers of a MMD at @dev_addr
750 * from PHY at @addr on @bus.
751 *
752 * Returns: 0 on success, -EIO on failure.
753 */
754static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr,
755 u32 *devices_in_package)
756{
757 int phy_reg;
758
759 phy_reg = mdiobus_c45_read(bus, addr, dev_addr, MDIO_DEVS2);
760 if (phy_reg < 0)
761 return -EIO;
762 *devices_in_package = phy_reg << 16;
763
764 phy_reg = mdiobus_c45_read(bus, addr, dev_addr, MDIO_DEVS1);
765 if (phy_reg < 0)
766 return -EIO;
767 *devices_in_package |= phy_reg;
768
769 return 0;
770}
771
772/**
773 * get_phy_c45_ids - reads the specified addr for its 802.3-c45 IDs.
774 * @bus: the target MII bus
775 * @addr: PHY address on the MII bus
776 * @c45_ids: where to store the c45 ID information.
777 *
778 * Read the PHY "devices in package". If this appears to be valid, read
779 * the PHY identifiers for each device. Return the "devices in package"
780 * and identifiers in @c45_ids.
781 *
782 * Returns zero on success, %-EIO on bus access error, or %-ENODEV if
783 * the "devices in package" is invalid.
784 */
785static int get_phy_c45_ids(struct mii_bus *bus, int addr,
786 struct phy_c45_device_ids *c45_ids)
787{
788 const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
789 u32 devs_in_pkg = 0;
790 int i, ret, phy_reg;
791
792 /* Find first non-zero Devices In package. Device zero is reserved
793 * for 802.3 c45 complied PHYs, so don't probe it at first.
794 */
795 for (i = 1; i < MDIO_MMD_NUM && (devs_in_pkg == 0 ||
796 (devs_in_pkg & 0x1fffffff) == 0x1fffffff); i++) {
797 if (i == MDIO_MMD_VEND1 || i == MDIO_MMD_VEND2) {
798 /* Check that there is a device present at this
799 * address before reading the devices-in-package
800 * register to avoid reading garbage from the PHY.
801 * Some PHYs (88x3310) vendor space is not IEEE802.3
802 * compliant.
803 */
804 ret = phy_c45_probe_present(bus, addr, i);
805 if (ret < 0)
806 return -EIO;
807
808 if (!ret)
809 continue;
810 }
811 phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, &devs_in_pkg);
812 if (phy_reg < 0)
813 return -EIO;
814 }
815
816 if ((devs_in_pkg & 0x1fffffff) == 0x1fffffff) {
817 /* If mostly Fs, there is no device there, then let's probe
818 * MMD 0, as some 10G PHYs have zero Devices In package,
819 * e.g. Cortina CS4315/CS4340 PHY.
820 */
821 phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, &devs_in_pkg);
822 if (phy_reg < 0)
823 return -EIO;
824
825 /* no device there, let's get out of here */
826 if ((devs_in_pkg & 0x1fffffff) == 0x1fffffff)
827 return -ENODEV;
828 }
829
830 /* Now probe Device Identifiers for each device present. */
831 for (i = 1; i < num_ids; i++) {
832 if (!(devs_in_pkg & (1 << i)))
833 continue;
834
835 if (i == MDIO_MMD_VEND1 || i == MDIO_MMD_VEND2) {
836 /* Probe the "Device Present" bits for the vendor MMDs
837 * to ignore these if they do not contain IEEE 802.3
838 * registers.
839 */
840 ret = phy_c45_probe_present(bus, addr, i);
841 if (ret < 0)
842 return ret;
843
844 if (!ret)
845 continue;
846 }
847
848 phy_reg = mdiobus_c45_read(bus, addr, i, MII_PHYSID1);
849 if (phy_reg < 0)
850 return -EIO;
851 c45_ids->device_ids[i] = phy_reg << 16;
852
853 phy_reg = mdiobus_c45_read(bus, addr, i, MII_PHYSID2);
854 if (phy_reg < 0)
855 return -EIO;
856 c45_ids->device_ids[i] |= phy_reg;
857 }
858
859 c45_ids->devices_in_package = devs_in_pkg;
860 /* Bit 0 doesn't represent a device, it indicates c22 regs presence */
861 c45_ids->mmds_present = devs_in_pkg & ~BIT(0);
862
863 return 0;
864}
865
866/**
867 * get_phy_c22_id - reads the specified addr for its clause 22 ID.
868 * @bus: the target MII bus
869 * @addr: PHY address on the MII bus
870 * @phy_id: where to store the ID retrieved.
871 *
872 * Read the 802.3 clause 22 PHY ID from the PHY at @addr on the @bus,
873 * placing it in @phy_id. Return zero on successful read and the ID is
874 * valid, %-EIO on bus access error, or %-ENODEV if no device responds
875 * or invalid ID.
876 */
877static int get_phy_c22_id(struct mii_bus *bus, int addr, u32 *phy_id)
878{
879 int phy_reg;
880
881 /* Grab the bits from PHYIR1, and put them in the upper half */
882 phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
883 if (phy_reg < 0) {
884 /* returning -ENODEV doesn't stop bus scanning */
885 return (phy_reg == -EIO || phy_reg == -ENODEV) ? -ENODEV : -EIO;
886 }
887
888 *phy_id = phy_reg << 16;
889
890 /* Grab the bits from PHYIR2, and put them in the lower half */
891 phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
892 if (phy_reg < 0) {
893 /* returning -ENODEV doesn't stop bus scanning */
894 return (phy_reg == -EIO || phy_reg == -ENODEV) ? -ENODEV : -EIO;
895 }
896
897 *phy_id |= phy_reg;
898
899 /* If the phy_id is mostly Fs, there is no device there */
900 if ((*phy_id & 0x1fffffff) == 0x1fffffff)
901 return -ENODEV;
902
903 return 0;
904}
905
906/* Extract the phy ID from the compatible string of the form
907 * ethernet-phy-idAAAA.BBBB.
908 */
909int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id)
910{
911 unsigned int upper, lower;
912 const char *cp;
913 int ret;
914
915 ret = fwnode_property_read_string(fwnode, "compatible", &cp);
916 if (ret)
917 return ret;
918
919 if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) != 2)
920 return -EINVAL;
921
922 *phy_id = ((upper & GENMASK(15, 0)) << 16) | (lower & GENMASK(15, 0));
923 return 0;
924}
925EXPORT_SYMBOL(fwnode_get_phy_id);
926
927/**
928 * get_phy_device - reads the specified PHY device and returns its @phy_device
929 * struct
930 * @bus: the target MII bus
931 * @addr: PHY address on the MII bus
932 * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
933 *
934 * Probe for a PHY at @addr on @bus.
935 *
936 * When probing for a clause 22 PHY, then read the ID registers. If we find
937 * a valid ID, allocate and return a &struct phy_device.
938 *
939 * When probing for a clause 45 PHY, read the "devices in package" registers.
940 * If the "devices in package" appears valid, read the ID registers for each
941 * MMD, allocate and return a &struct phy_device.
942 *
943 * Returns an allocated &struct phy_device on success, %-ENODEV if there is
944 * no PHY present, or %-EIO on bus access error.
945 */
946struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
947{
948 struct phy_c45_device_ids c45_ids;
949 u32 phy_id = 0;
950 int r;
951
952 c45_ids.devices_in_package = 0;
953 c45_ids.mmds_present = 0;
954 memset(c45_ids.device_ids, 0xff, sizeof(c45_ids.device_ids));
955
956 if (is_c45)
957 r = get_phy_c45_ids(bus, addr, &c45_ids);
958 else
959 r = get_phy_c22_id(bus, addr, &phy_id);
960
961 if (r)
962 return ERR_PTR(r);
963
964 /* PHY device such as the Marvell Alaska 88E2110 will return a PHY ID
965 * of 0 when probed using get_phy_c22_id() with no error. Proceed to
966 * probe with C45 to see if we're able to get a valid PHY ID in the C45
967 * space, if successful, create the C45 PHY device.
968 */
969 if (!is_c45 && phy_id == 0 && bus->read_c45) {
970 r = get_phy_c45_ids(bus, addr, &c45_ids);
971 if (!r)
972 return phy_device_create(bus, addr, phy_id,
973 true, &c45_ids);
974 }
975
976 return phy_device_create(bus, addr, phy_id, is_c45, &c45_ids);
977}
978EXPORT_SYMBOL(get_phy_device);
979
980/**
981 * phy_device_register - Register the phy device on the MDIO bus
982 * @phydev: phy_device structure to be added to the MDIO bus
983 */
984int phy_device_register(struct phy_device *phydev)
985{
986 int err;
987
988 err = mdiobus_register_device(&phydev->mdio);
989 if (err)
990 return err;
991
992 /* Deassert the reset signal */
993 phy_device_reset(phydev, 0);
994
995 /* Run all of the fixups for this PHY */
996 err = phy_scan_fixups(phydev);
997 if (err) {
998 phydev_err(phydev, "failed to initialize\n");
999 goto out;
1000 }
1001
1002 err = device_add(&phydev->mdio.dev);
1003 if (err) {
1004 phydev_err(phydev, "failed to add\n");
1005 goto out;
1006 }
1007
1008 return 0;
1009
1010 out:
1011 /* Assert the reset signal */
1012 phy_device_reset(phydev, 1);
1013
1014 mdiobus_unregister_device(&phydev->mdio);
1015 return err;
1016}
1017EXPORT_SYMBOL(phy_device_register);
1018
1019/**
1020 * phy_device_remove - Remove a previously registered phy device from the MDIO bus
1021 * @phydev: phy_device structure to remove
1022 *
1023 * This doesn't free the phy_device itself, it merely reverses the effects
1024 * of phy_device_register(). Use phy_device_free() to free the device
1025 * after calling this function.
1026 */
1027void phy_device_remove(struct phy_device *phydev)
1028{
1029 unregister_mii_timestamper(phydev->mii_ts);
1030 pse_control_put(phydev->psec);
1031
1032 device_del(&phydev->mdio.dev);
1033
1034 /* Assert the reset signal */
1035 phy_device_reset(phydev, 1);
1036
1037 mdiobus_unregister_device(&phydev->mdio);
1038}
1039EXPORT_SYMBOL(phy_device_remove);
1040
1041/**
1042 * phy_get_c45_ids - Read 802.3-c45 IDs for phy device.
1043 * @phydev: phy_device structure to read 802.3-c45 IDs
1044 *
1045 * Returns zero on success, %-EIO on bus access error, or %-ENODEV if
1046 * the "devices in package" is invalid.
1047 */
1048int phy_get_c45_ids(struct phy_device *phydev)
1049{
1050 return get_phy_c45_ids(phydev->mdio.bus, phydev->mdio.addr,
1051 &phydev->c45_ids);
1052}
1053EXPORT_SYMBOL(phy_get_c45_ids);
1054
1055/**
1056 * phy_find_first - finds the first PHY device on the bus
1057 * @bus: the target MII bus
1058 */
1059struct phy_device *phy_find_first(struct mii_bus *bus)
1060{
1061 struct phy_device *phydev;
1062 int addr;
1063
1064 for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
1065 phydev = mdiobus_get_phy(bus, addr);
1066 if (phydev)
1067 return phydev;
1068 }
1069 return NULL;
1070}
1071EXPORT_SYMBOL(phy_find_first);
1072
1073static void phy_link_change(struct phy_device *phydev, bool up)
1074{
1075 struct net_device *netdev = phydev->attached_dev;
1076
1077 if (up)
1078 netif_carrier_on(netdev);
1079 else
1080 netif_carrier_off(netdev);
1081 phydev->adjust_link(netdev);
1082 if (phydev->mii_ts && phydev->mii_ts->link_state)
1083 phydev->mii_ts->link_state(phydev->mii_ts, phydev);
1084}
1085
1086/**
1087 * phy_prepare_link - prepares the PHY layer to monitor link status
1088 * @phydev: target phy_device struct
1089 * @handler: callback function for link status change notifications
1090 *
1091 * Description: Tells the PHY infrastructure to handle the
1092 * gory details on monitoring link status (whether through
1093 * polling or an interrupt), and to call back to the
1094 * connected device driver when the link status changes.
1095 * If you want to monitor your own link state, don't call
1096 * this function.
1097 */
1098static void phy_prepare_link(struct phy_device *phydev,
1099 void (*handler)(struct net_device *))
1100{
1101 phydev->adjust_link = handler;
1102}
1103
1104/**
1105 * phy_connect_direct - connect an ethernet device to a specific phy_device
1106 * @dev: the network device to connect
1107 * @phydev: the pointer to the phy device
1108 * @handler: callback function for state change notifications
1109 * @interface: PHY device's interface
1110 */
1111int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
1112 void (*handler)(struct net_device *),
1113 phy_interface_t interface)
1114{
1115 int rc;
1116
1117 if (!dev)
1118 return -EINVAL;
1119
1120 rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
1121 if (rc)
1122 return rc;
1123
1124 phy_prepare_link(phydev, handler);
1125 if (phy_interrupt_is_valid(phydev))
1126 phy_request_interrupt(phydev);
1127
1128 return 0;
1129}
1130EXPORT_SYMBOL(phy_connect_direct);
1131
1132/**
1133 * phy_connect - connect an ethernet device to a PHY device
1134 * @dev: the network device to connect
1135 * @bus_id: the id string of the PHY device to connect
1136 * @handler: callback function for state change notifications
1137 * @interface: PHY device's interface
1138 *
1139 * Description: Convenience function for connecting ethernet
1140 * devices to PHY devices. The default behavior is for
1141 * the PHY infrastructure to handle everything, and only notify
1142 * the connected driver when the link status changes. If you
1143 * don't want, or can't use the provided functionality, you may
1144 * choose to call only the subset of functions which provide
1145 * the desired functionality.
1146 */
1147struct phy_device *phy_connect(struct net_device *dev, const char *bus_id,
1148 void (*handler)(struct net_device *),
1149 phy_interface_t interface)
1150{
1151 struct phy_device *phydev;
1152 struct device *d;
1153 int rc;
1154
1155 /* Search the list of PHY devices on the mdio bus for the
1156 * PHY with the requested name
1157 */
1158 d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id);
1159 if (!d) {
1160 pr_err("PHY %s not found\n", bus_id);
1161 return ERR_PTR(-ENODEV);
1162 }
1163 phydev = to_phy_device(d);
1164
1165 rc = phy_connect_direct(dev, phydev, handler, interface);
1166 put_device(d);
1167 if (rc)
1168 return ERR_PTR(rc);
1169
1170 return phydev;
1171}
1172EXPORT_SYMBOL(phy_connect);
1173
1174/**
1175 * phy_disconnect - disable interrupts, stop state machine, and detach a PHY
1176 * device
1177 * @phydev: target phy_device struct
1178 */
1179void phy_disconnect(struct phy_device *phydev)
1180{
1181 if (phy_is_started(phydev))
1182 phy_stop(phydev);
1183
1184 if (phy_interrupt_is_valid(phydev))
1185 phy_free_interrupt(phydev);
1186
1187 phydev->adjust_link = NULL;
1188
1189 phy_detach(phydev);
1190}
1191EXPORT_SYMBOL(phy_disconnect);
1192
1193/**
1194 * phy_poll_reset - Safely wait until a PHY reset has properly completed
1195 * @phydev: The PHY device to poll
1196 *
1197 * Description: According to IEEE 802.3, Section 2, Subsection 22.2.4.1.1, as
1198 * published in 2008, a PHY reset may take up to 0.5 seconds. The MII BMCR
1199 * register must be polled until the BMCR_RESET bit clears.
1200 *
1201 * Furthermore, any attempts to write to PHY registers may have no effect
1202 * or even generate MDIO bus errors until this is complete.
1203 *
1204 * Some PHYs (such as the Marvell 88E1111) don't entirely conform to the
1205 * standard and do not fully reset after the BMCR_RESET bit is set, and may
1206 * even *REQUIRE* a soft-reset to properly restart autonegotiation. In an
1207 * effort to support such broken PHYs, this function is separate from the
1208 * standard phy_init_hw() which will zero all the other bits in the BMCR
1209 * and reapply all driver-specific and board-specific fixups.
1210 */
1211static int phy_poll_reset(struct phy_device *phydev)
1212{
1213 /* Poll until the reset bit clears (50ms per retry == 0.6 sec) */
1214 int ret, val;
1215
1216 ret = phy_read_poll_timeout(phydev, MII_BMCR, val, !(val & BMCR_RESET),
1217 50000, 600000, true);
1218 if (ret)
1219 return ret;
1220 /* Some chips (smsc911x) may still need up to another 1ms after the
1221 * BMCR_RESET bit is cleared before they are usable.
1222 */
1223 msleep(1);
1224 return 0;
1225}
1226
1227int phy_init_hw(struct phy_device *phydev)
1228{
1229 int ret = 0;
1230
1231 /* Deassert the reset signal */
1232 phy_device_reset(phydev, 0);
1233
1234 if (!phydev->drv)
1235 return 0;
1236
1237 if (phydev->drv->soft_reset) {
1238 ret = phydev->drv->soft_reset(phydev);
1239 if (ret < 0)
1240 return ret;
1241
1242 /* see comment in genphy_soft_reset for an explanation */
1243 phydev->suspended = 0;
1244 }
1245
1246 ret = phy_scan_fixups(phydev);
1247 if (ret < 0)
1248 return ret;
1249
1250 phy_interface_zero(phydev->possible_interfaces);
1251
1252 if (phydev->drv->config_init) {
1253 ret = phydev->drv->config_init(phydev);
1254 if (ret < 0)
1255 return ret;
1256 }
1257
1258 if (phydev->drv->config_intr) {
1259 ret = phydev->drv->config_intr(phydev);
1260 if (ret < 0)
1261 return ret;
1262 }
1263
1264 return 0;
1265}
1266EXPORT_SYMBOL(phy_init_hw);
1267
1268void phy_attached_info(struct phy_device *phydev)
1269{
1270 phy_attached_print(phydev, NULL);
1271}
1272EXPORT_SYMBOL(phy_attached_info);
1273
1274#define ATTACHED_FMT "attached PHY driver %s(mii_bus:phy_addr=%s, irq=%s)"
1275char *phy_attached_info_irq(struct phy_device *phydev)
1276{
1277 char *irq_str;
1278 char irq_num[8];
1279
1280 switch(phydev->irq) {
1281 case PHY_POLL:
1282 irq_str = "POLL";
1283 break;
1284 case PHY_MAC_INTERRUPT:
1285 irq_str = "MAC";
1286 break;
1287 default:
1288 snprintf(irq_num, sizeof(irq_num), "%d", phydev->irq);
1289 irq_str = irq_num;
1290 break;
1291 }
1292
1293 return kasprintf(GFP_KERNEL, "%s", irq_str);
1294}
1295EXPORT_SYMBOL(phy_attached_info_irq);
1296
1297void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
1298{
1299 const char *unbound = phydev->drv ? "" : "[unbound] ";
1300 char *irq_str = phy_attached_info_irq(phydev);
1301
1302 if (!fmt) {
1303 phydev_info(phydev, ATTACHED_FMT "\n", unbound,
1304 phydev_name(phydev), irq_str);
1305 } else {
1306 va_list ap;
1307
1308 phydev_info(phydev, ATTACHED_FMT, unbound,
1309 phydev_name(phydev), irq_str);
1310
1311 va_start(ap, fmt);
1312 vprintk(fmt, ap);
1313 va_end(ap);
1314 }
1315 kfree(irq_str);
1316}
1317EXPORT_SYMBOL(phy_attached_print);
1318
1319static void phy_sysfs_create_links(struct phy_device *phydev)
1320{
1321 struct net_device *dev = phydev->attached_dev;
1322 int err;
1323
1324 if (!dev)
1325 return;
1326
1327 err = sysfs_create_link(&phydev->mdio.dev.kobj, &dev->dev.kobj,
1328 "attached_dev");
1329 if (err)
1330 return;
1331
1332 err = sysfs_create_link_nowarn(&dev->dev.kobj,
1333 &phydev->mdio.dev.kobj,
1334 "phydev");
1335 if (err) {
1336 dev_err(&dev->dev, "could not add device link to %s err %d\n",
1337 kobject_name(&phydev->mdio.dev.kobj),
1338 err);
1339 /* non-fatal - some net drivers can use one netdevice
1340 * with more then one phy
1341 */
1342 }
1343
1344 phydev->sysfs_links = true;
1345}
1346
1347static ssize_t
1348phy_standalone_show(struct device *dev, struct device_attribute *attr,
1349 char *buf)
1350{
1351 struct phy_device *phydev = to_phy_device(dev);
1352
1353 return sysfs_emit(buf, "%d\n", !phydev->attached_dev);
1354}
1355static DEVICE_ATTR_RO(phy_standalone);
1356
1357/**
1358 * phy_sfp_attach - attach the SFP bus to the PHY upstream network device
1359 * @upstream: pointer to the phy device
1360 * @bus: sfp bus representing cage being attached
1361 *
1362 * This is used to fill in the sfp_upstream_ops .attach member.
1363 */
1364void phy_sfp_attach(void *upstream, struct sfp_bus *bus)
1365{
1366 struct phy_device *phydev = upstream;
1367
1368 if (phydev->attached_dev)
1369 phydev->attached_dev->sfp_bus = bus;
1370 phydev->sfp_bus_attached = true;
1371}
1372EXPORT_SYMBOL(phy_sfp_attach);
1373
1374/**
1375 * phy_sfp_detach - detach the SFP bus from the PHY upstream network device
1376 * @upstream: pointer to the phy device
1377 * @bus: sfp bus representing cage being attached
1378 *
1379 * This is used to fill in the sfp_upstream_ops .detach member.
1380 */
1381void phy_sfp_detach(void *upstream, struct sfp_bus *bus)
1382{
1383 struct phy_device *phydev = upstream;
1384
1385 if (phydev->attached_dev)
1386 phydev->attached_dev->sfp_bus = NULL;
1387 phydev->sfp_bus_attached = false;
1388}
1389EXPORT_SYMBOL(phy_sfp_detach);
1390
1391/**
1392 * phy_sfp_probe - probe for a SFP cage attached to this PHY device
1393 * @phydev: Pointer to phy_device
1394 * @ops: SFP's upstream operations
1395 */
1396int phy_sfp_probe(struct phy_device *phydev,
1397 const struct sfp_upstream_ops *ops)
1398{
1399 struct sfp_bus *bus;
1400 int ret = 0;
1401
1402 if (phydev->mdio.dev.fwnode) {
1403 bus = sfp_bus_find_fwnode(phydev->mdio.dev.fwnode);
1404 if (IS_ERR(bus))
1405 return PTR_ERR(bus);
1406
1407 phydev->sfp_bus = bus;
1408
1409 ret = sfp_bus_add_upstream(bus, phydev, ops);
1410 sfp_bus_put(bus);
1411 }
1412 return ret;
1413}
1414EXPORT_SYMBOL(phy_sfp_probe);
1415
1416/**
1417 * phy_attach_direct - attach a network device to a given PHY device pointer
1418 * @dev: network device to attach
1419 * @phydev: Pointer to phy_device to attach
1420 * @flags: PHY device's dev_flags
1421 * @interface: PHY device's interface
1422 *
1423 * Description: Called by drivers to attach to a particular PHY
1424 * device. The phy_device is found, and properly hooked up
1425 * to the phy_driver. If no driver is attached, then a
1426 * generic driver is used. The phy_device is given a ptr to
1427 * the attaching device, and given a callback for link status
1428 * change. The phy_device is returned to the attaching driver.
1429 * This function takes a reference on the phy device.
1430 */
1431int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
1432 u32 flags, phy_interface_t interface)
1433{
1434 struct mii_bus *bus = phydev->mdio.bus;
1435 struct device *d = &phydev->mdio.dev;
1436 struct module *ndev_owner = NULL;
1437 bool using_genphy = false;
1438 int err;
1439
1440 /* For Ethernet device drivers that register their own MDIO bus, we
1441 * will have bus->owner match ndev_mod, so we do not want to increment
1442 * our own module->refcnt here, otherwise we would not be able to
1443 * unload later on.
1444 */
1445 if (dev)
1446 ndev_owner = dev->dev.parent->driver->owner;
1447 if (ndev_owner != bus->owner && !try_module_get(bus->owner)) {
1448 phydev_err(phydev, "failed to get the bus module\n");
1449 return -EIO;
1450 }
1451
1452 get_device(d);
1453
1454 /* Assume that if there is no driver, that it doesn't
1455 * exist, and we should use the genphy driver.
1456 */
1457 if (!d->driver) {
1458 if (phydev->is_c45)
1459 d->driver = &genphy_c45_driver.mdiodrv.driver;
1460 else
1461 d->driver = &genphy_driver.mdiodrv.driver;
1462
1463 using_genphy = true;
1464 }
1465
1466 if (!try_module_get(d->driver->owner)) {
1467 phydev_err(phydev, "failed to get the device driver module\n");
1468 err = -EIO;
1469 goto error_put_device;
1470 }
1471
1472 if (using_genphy) {
1473 err = d->driver->probe(d);
1474 if (err >= 0)
1475 err = device_bind_driver(d);
1476
1477 if (err)
1478 goto error_module_put;
1479 }
1480
1481 if (phydev->attached_dev) {
1482 dev_err(&dev->dev, "PHY already attached\n");
1483 err = -EBUSY;
1484 goto error;
1485 }
1486
1487 phydev->phy_link_change = phy_link_change;
1488 if (dev) {
1489 phydev->attached_dev = dev;
1490 dev->phydev = phydev;
1491
1492 if (phydev->sfp_bus_attached)
1493 dev->sfp_bus = phydev->sfp_bus;
1494 }
1495
1496 /* Some Ethernet drivers try to connect to a PHY device before
1497 * calling register_netdevice() -> netdev_register_kobject() and
1498 * does the dev->dev.kobj initialization. Here we only check for
1499 * success which indicates that the network device kobject is
1500 * ready. Once we do that we still need to keep track of whether
1501 * links were successfully set up or not for phy_detach() to
1502 * remove them accordingly.
1503 */
1504 phydev->sysfs_links = false;
1505
1506 phy_sysfs_create_links(phydev);
1507
1508 if (!phydev->attached_dev) {
1509 err = sysfs_create_file(&phydev->mdio.dev.kobj,
1510 &dev_attr_phy_standalone.attr);
1511 if (err)
1512 phydev_err(phydev, "error creating 'phy_standalone' sysfs entry\n");
1513 }
1514
1515 phydev->dev_flags |= flags;
1516
1517 phydev->interface = interface;
1518
1519 phydev->state = PHY_READY;
1520
1521 phydev->interrupts = PHY_INTERRUPT_DISABLED;
1522
1523 /* PHYs can request to use poll mode even though they have an
1524 * associated interrupt line. This could be the case if they
1525 * detect a broken interrupt handling.
1526 */
1527 if (phydev->dev_flags & PHY_F_NO_IRQ)
1528 phydev->irq = PHY_POLL;
1529
1530 /* Port is set to PORT_TP by default and the actual PHY driver will set
1531 * it to different value depending on the PHY configuration. If we have
1532 * the generic PHY driver we can't figure it out, thus set the old
1533 * legacy PORT_MII value.
1534 */
1535 if (using_genphy)
1536 phydev->port = PORT_MII;
1537
1538 /* Initial carrier state is off as the phy is about to be
1539 * (re)initialized.
1540 */
1541 if (dev)
1542 netif_carrier_off(phydev->attached_dev);
1543
1544 /* Do initial configuration here, now that
1545 * we have certain key parameters
1546 * (dev_flags and interface)
1547 */
1548 err = phy_init_hw(phydev);
1549 if (err)
1550 goto error;
1551
1552 phy_resume(phydev);
1553 if (!phydev->is_on_sfp_module)
1554 phy_led_triggers_register(phydev);
1555
1556 /**
1557 * If the external phy used by current mac interface is managed by
1558 * another mac interface, so we should create a device link between
1559 * phy dev and mac dev.
1560 */
1561 if (dev && phydev->mdio.bus->parent && dev->dev.parent != phydev->mdio.bus->parent)
1562 phydev->devlink = device_link_add(dev->dev.parent, &phydev->mdio.dev,
1563 DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
1564
1565 return err;
1566
1567error:
1568 /* phy_detach() does all of the cleanup below */
1569 phy_detach(phydev);
1570 return err;
1571
1572error_module_put:
1573 module_put(d->driver->owner);
1574 d->driver = NULL;
1575error_put_device:
1576 put_device(d);
1577 if (ndev_owner != bus->owner)
1578 module_put(bus->owner);
1579 return err;
1580}
1581EXPORT_SYMBOL(phy_attach_direct);
1582
1583/**
1584 * phy_attach - attach a network device to a particular PHY device
1585 * @dev: network device to attach
1586 * @bus_id: Bus ID of PHY device to attach
1587 * @interface: PHY device's interface
1588 *
1589 * Description: Same as phy_attach_direct() except that a PHY bus_id
1590 * string is passed instead of a pointer to a struct phy_device.
1591 */
1592struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
1593 phy_interface_t interface)
1594{
1595 struct bus_type *bus = &mdio_bus_type;
1596 struct phy_device *phydev;
1597 struct device *d;
1598 int rc;
1599
1600 if (!dev)
1601 return ERR_PTR(-EINVAL);
1602
1603 /* Search the list of PHY devices on the mdio bus for the
1604 * PHY with the requested name
1605 */
1606 d = bus_find_device_by_name(bus, NULL, bus_id);
1607 if (!d) {
1608 pr_err("PHY %s not found\n", bus_id);
1609 return ERR_PTR(-ENODEV);
1610 }
1611 phydev = to_phy_device(d);
1612
1613 rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
1614 put_device(d);
1615 if (rc)
1616 return ERR_PTR(rc);
1617
1618 return phydev;
1619}
1620EXPORT_SYMBOL(phy_attach);
1621
1622static bool phy_driver_is_genphy_kind(struct phy_device *phydev,
1623 struct device_driver *driver)
1624{
1625 struct device *d = &phydev->mdio.dev;
1626 bool ret = false;
1627
1628 if (!phydev->drv)
1629 return ret;
1630
1631 get_device(d);
1632 ret = d->driver == driver;
1633 put_device(d);
1634
1635 return ret;
1636}
1637
1638bool phy_driver_is_genphy(struct phy_device *phydev)
1639{
1640 return phy_driver_is_genphy_kind(phydev,
1641 &genphy_driver.mdiodrv.driver);
1642}
1643EXPORT_SYMBOL_GPL(phy_driver_is_genphy);
1644
1645bool phy_driver_is_genphy_10g(struct phy_device *phydev)
1646{
1647 return phy_driver_is_genphy_kind(phydev,
1648 &genphy_c45_driver.mdiodrv.driver);
1649}
1650EXPORT_SYMBOL_GPL(phy_driver_is_genphy_10g);
1651
1652/**
1653 * phy_package_join - join a common PHY group
1654 * @phydev: target phy_device struct
1655 * @base_addr: cookie and base PHY address of PHY package for offset
1656 * calculation of global register access
1657 * @priv_size: if non-zero allocate this amount of bytes for private data
1658 *
1659 * This joins a PHY group and provides a shared storage for all phydevs in
1660 * this group. This is intended to be used for packages which contain
1661 * more than one PHY, for example a quad PHY transceiver.
1662 *
1663 * The base_addr parameter serves as cookie which has to have the same values
1664 * for all members of one group and as the base PHY address of the PHY package
1665 * for offset calculation to access generic registers of a PHY package.
1666 * Usually, one of the PHY addresses of the different PHYs in the package
1667 * provides access to these global registers.
1668 * The address which is given here, will be used in the phy_package_read()
1669 * and phy_package_write() convenience functions as base and added to the
1670 * passed offset in those functions.
1671 *
1672 * This will set the shared pointer of the phydev to the shared storage.
1673 * If this is the first call for a this cookie the shared storage will be
1674 * allocated. If priv_size is non-zero, the given amount of bytes are
1675 * allocated for the priv member.
1676 *
1677 * Returns < 1 on error, 0 on success. Esp. calling phy_package_join()
1678 * with the same cookie but a different priv_size is an error.
1679 */
1680int phy_package_join(struct phy_device *phydev, int base_addr, size_t priv_size)
1681{
1682 struct mii_bus *bus = phydev->mdio.bus;
1683 struct phy_package_shared *shared;
1684 int ret;
1685
1686 if (base_addr < 0 || base_addr >= PHY_MAX_ADDR)
1687 return -EINVAL;
1688
1689 mutex_lock(&bus->shared_lock);
1690 shared = bus->shared[base_addr];
1691 if (!shared) {
1692 ret = -ENOMEM;
1693 shared = kzalloc(sizeof(*shared), GFP_KERNEL);
1694 if (!shared)
1695 goto err_unlock;
1696 if (priv_size) {
1697 shared->priv = kzalloc(priv_size, GFP_KERNEL);
1698 if (!shared->priv)
1699 goto err_free;
1700 shared->priv_size = priv_size;
1701 }
1702 shared->base_addr = base_addr;
1703 refcount_set(&shared->refcnt, 1);
1704 bus->shared[base_addr] = shared;
1705 } else {
1706 ret = -EINVAL;
1707 if (priv_size && priv_size != shared->priv_size)
1708 goto err_unlock;
1709 refcount_inc(&shared->refcnt);
1710 }
1711 mutex_unlock(&bus->shared_lock);
1712
1713 phydev->shared = shared;
1714
1715 return 0;
1716
1717err_free:
1718 kfree(shared);
1719err_unlock:
1720 mutex_unlock(&bus->shared_lock);
1721 return ret;
1722}
1723EXPORT_SYMBOL_GPL(phy_package_join);
1724
1725/**
1726 * phy_package_leave - leave a common PHY group
1727 * @phydev: target phy_device struct
1728 *
1729 * This leaves a PHY group created by phy_package_join(). If this phydev
1730 * was the last user of the shared data between the group, this data is
1731 * freed. Resets the phydev->shared pointer to NULL.
1732 */
1733void phy_package_leave(struct phy_device *phydev)
1734{
1735 struct phy_package_shared *shared = phydev->shared;
1736 struct mii_bus *bus = phydev->mdio.bus;
1737
1738 if (!shared)
1739 return;
1740
1741 if (refcount_dec_and_mutex_lock(&shared->refcnt, &bus->shared_lock)) {
1742 bus->shared[shared->base_addr] = NULL;
1743 mutex_unlock(&bus->shared_lock);
1744 kfree(shared->priv);
1745 kfree(shared);
1746 }
1747
1748 phydev->shared = NULL;
1749}
1750EXPORT_SYMBOL_GPL(phy_package_leave);
1751
1752static void devm_phy_package_leave(struct device *dev, void *res)
1753{
1754 phy_package_leave(*(struct phy_device **)res);
1755}
1756
1757/**
1758 * devm_phy_package_join - resource managed phy_package_join()
1759 * @dev: device that is registering this PHY package
1760 * @phydev: target phy_device struct
1761 * @base_addr: cookie and base PHY address of PHY package for offset
1762 * calculation of global register access
1763 * @priv_size: if non-zero allocate this amount of bytes for private data
1764 *
1765 * Managed phy_package_join(). Shared storage fetched by this function,
1766 * phy_package_leave() is automatically called on driver detach. See
1767 * phy_package_join() for more information.
1768 */
1769int devm_phy_package_join(struct device *dev, struct phy_device *phydev,
1770 int base_addr, size_t priv_size)
1771{
1772 struct phy_device **ptr;
1773 int ret;
1774
1775 ptr = devres_alloc(devm_phy_package_leave, sizeof(*ptr),
1776 GFP_KERNEL);
1777 if (!ptr)
1778 return -ENOMEM;
1779
1780 ret = phy_package_join(phydev, base_addr, priv_size);
1781
1782 if (!ret) {
1783 *ptr = phydev;
1784 devres_add(dev, ptr);
1785 } else {
1786 devres_free(ptr);
1787 }
1788
1789 return ret;
1790}
1791EXPORT_SYMBOL_GPL(devm_phy_package_join);
1792
1793/**
1794 * phy_detach - detach a PHY device from its network device
1795 * @phydev: target phy_device struct
1796 *
1797 * This detaches the phy device from its network device and the phy
1798 * driver, and drops the reference count taken in phy_attach_direct().
1799 */
1800void phy_detach(struct phy_device *phydev)
1801{
1802 struct net_device *dev = phydev->attached_dev;
1803 struct module *ndev_owner = NULL;
1804 struct mii_bus *bus;
1805
1806 if (phydev->devlink)
1807 device_link_del(phydev->devlink);
1808
1809 if (phydev->sysfs_links) {
1810 if (dev)
1811 sysfs_remove_link(&dev->dev.kobj, "phydev");
1812 sysfs_remove_link(&phydev->mdio.dev.kobj, "attached_dev");
1813 }
1814
1815 if (!phydev->attached_dev)
1816 sysfs_remove_file(&phydev->mdio.dev.kobj,
1817 &dev_attr_phy_standalone.attr);
1818
1819 phy_suspend(phydev);
1820 if (dev) {
1821 phydev->attached_dev->phydev = NULL;
1822 phydev->attached_dev = NULL;
1823 }
1824 phydev->phylink = NULL;
1825
1826 if (!phydev->is_on_sfp_module)
1827 phy_led_triggers_unregister(phydev);
1828
1829 if (phydev->mdio.dev.driver)
1830 module_put(phydev->mdio.dev.driver->owner);
1831
1832 /* If the device had no specific driver before (i.e. - it
1833 * was using the generic driver), we unbind the device
1834 * from the generic driver so that there's a chance a
1835 * real driver could be loaded
1836 */
1837 if (phy_driver_is_genphy(phydev) ||
1838 phy_driver_is_genphy_10g(phydev))
1839 device_release_driver(&phydev->mdio.dev);
1840
1841 /* Assert the reset signal */
1842 phy_device_reset(phydev, 1);
1843
1844 /*
1845 * The phydev might go away on the put_device() below, so avoid
1846 * a use-after-free bug by reading the underlying bus first.
1847 */
1848 bus = phydev->mdio.bus;
1849
1850 put_device(&phydev->mdio.dev);
1851 if (dev)
1852 ndev_owner = dev->dev.parent->driver->owner;
1853 if (ndev_owner != bus->owner)
1854 module_put(bus->owner);
1855}
1856EXPORT_SYMBOL(phy_detach);
1857
1858int phy_suspend(struct phy_device *phydev)
1859{
1860 struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
1861 struct net_device *netdev = phydev->attached_dev;
1862 struct phy_driver *phydrv = phydev->drv;
1863 int ret;
1864
1865 if (phydev->suspended)
1866 return 0;
1867
1868 phy_ethtool_get_wol(phydev, &wol);
1869 phydev->wol_enabled = wol.wolopts || (netdev && netdev->wol_enabled);
1870 /* If the device has WOL enabled, we cannot suspend the PHY */
1871 if (phydev->wol_enabled && !(phydrv->flags & PHY_ALWAYS_CALL_SUSPEND))
1872 return -EBUSY;
1873
1874 if (!phydrv || !phydrv->suspend)
1875 return 0;
1876
1877 ret = phydrv->suspend(phydev);
1878 if (!ret)
1879 phydev->suspended = true;
1880
1881 return ret;
1882}
1883EXPORT_SYMBOL(phy_suspend);
1884
1885int __phy_resume(struct phy_device *phydev)
1886{
1887 struct phy_driver *phydrv = phydev->drv;
1888 int ret;
1889
1890 lockdep_assert_held(&phydev->lock);
1891
1892 if (!phydrv || !phydrv->resume)
1893 return 0;
1894
1895 ret = phydrv->resume(phydev);
1896 if (!ret)
1897 phydev->suspended = false;
1898
1899 return ret;
1900}
1901EXPORT_SYMBOL(__phy_resume);
1902
1903int phy_resume(struct phy_device *phydev)
1904{
1905 int ret;
1906
1907 mutex_lock(&phydev->lock);
1908 ret = __phy_resume(phydev);
1909 mutex_unlock(&phydev->lock);
1910
1911 return ret;
1912}
1913EXPORT_SYMBOL(phy_resume);
1914
1915int phy_loopback(struct phy_device *phydev, bool enable)
1916{
1917 int ret = 0;
1918
1919 if (!phydev->drv)
1920 return -EIO;
1921
1922 mutex_lock(&phydev->lock);
1923
1924 if (enable && phydev->loopback_enabled) {
1925 ret = -EBUSY;
1926 goto out;
1927 }
1928
1929 if (!enable && !phydev->loopback_enabled) {
1930 ret = -EINVAL;
1931 goto out;
1932 }
1933
1934 if (phydev->drv->set_loopback)
1935 ret = phydev->drv->set_loopback(phydev, enable);
1936 else
1937 ret = genphy_loopback(phydev, enable);
1938
1939 if (ret)
1940 goto out;
1941
1942 phydev->loopback_enabled = enable;
1943
1944out:
1945 mutex_unlock(&phydev->lock);
1946 return ret;
1947}
1948EXPORT_SYMBOL(phy_loopback);
1949
1950/**
1951 * phy_reset_after_clk_enable - perform a PHY reset if needed
1952 * @phydev: target phy_device struct
1953 *
1954 * Description: Some PHYs are known to need a reset after their refclk was
1955 * enabled. This function evaluates the flags and perform the reset if it's
1956 * needed. Returns < 0 on error, 0 if the phy wasn't reset and 1 if the phy
1957 * was reset.
1958 */
1959int phy_reset_after_clk_enable(struct phy_device *phydev)
1960{
1961 if (!phydev || !phydev->drv)
1962 return -ENODEV;
1963
1964 if (phydev->drv->flags & PHY_RST_AFTER_CLK_EN) {
1965 phy_device_reset(phydev, 1);
1966 phy_device_reset(phydev, 0);
1967 return 1;
1968 }
1969
1970 return 0;
1971}
1972EXPORT_SYMBOL(phy_reset_after_clk_enable);
1973
1974/* Generic PHY support and helper functions */
1975
1976/**
1977 * genphy_config_advert - sanitize and advertise auto-negotiation parameters
1978 * @phydev: target phy_device struct
1979 *
1980 * Description: Writes MII_ADVERTISE with the appropriate values,
1981 * after sanitizing the values to make sure we only advertise
1982 * what is supported. Returns < 0 on error, 0 if the PHY's advertisement
1983 * hasn't changed, and > 0 if it has changed.
1984 */
1985static int genphy_config_advert(struct phy_device *phydev)
1986{
1987 int err, bmsr, changed = 0;
1988 u32 adv;
1989
1990 /* Only allow advertising what this PHY supports */
1991 linkmode_and(phydev->advertising, phydev->advertising,
1992 phydev->supported);
1993
1994 adv = linkmode_adv_to_mii_adv_t(phydev->advertising);
1995
1996 /* Setup standard advertisement */
1997 err = phy_modify_changed(phydev, MII_ADVERTISE,
1998 ADVERTISE_ALL | ADVERTISE_100BASE4 |
1999 ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
2000 adv);
2001 if (err < 0)
2002 return err;
2003 if (err > 0)
2004 changed = 1;
2005
2006 bmsr = phy_read(phydev, MII_BMSR);
2007 if (bmsr < 0)
2008 return bmsr;
2009
2010 /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all
2011 * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a
2012 * logical 1.
2013 */
2014 if (!(bmsr & BMSR_ESTATEN))
2015 return changed;
2016
2017 adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
2018
2019 err = phy_modify_changed(phydev, MII_CTRL1000,
2020 ADVERTISE_1000FULL | ADVERTISE_1000HALF,
2021 adv);
2022 if (err < 0)
2023 return err;
2024 if (err > 0)
2025 changed = 1;
2026
2027 return changed;
2028}
2029
2030/**
2031 * genphy_c37_config_advert - sanitize and advertise auto-negotiation parameters
2032 * @phydev: target phy_device struct
2033 *
2034 * Description: Writes MII_ADVERTISE with the appropriate values,
2035 * after sanitizing the values to make sure we only advertise
2036 * what is supported. Returns < 0 on error, 0 if the PHY's advertisement
2037 * hasn't changed, and > 0 if it has changed. This function is intended
2038 * for Clause 37 1000Base-X mode.
2039 */
2040static int genphy_c37_config_advert(struct phy_device *phydev)
2041{
2042 u16 adv = 0;
2043
2044 /* Only allow advertising what this PHY supports */
2045 linkmode_and(phydev->advertising, phydev->advertising,
2046 phydev->supported);
2047
2048 if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
2049 phydev->advertising))
2050 adv |= ADVERTISE_1000XFULL;
2051 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
2052 phydev->advertising))
2053 adv |= ADVERTISE_1000XPAUSE;
2054 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
2055 phydev->advertising))
2056 adv |= ADVERTISE_1000XPSE_ASYM;
2057
2058 return phy_modify_changed(phydev, MII_ADVERTISE,
2059 ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE |
2060 ADVERTISE_1000XHALF | ADVERTISE_1000XPSE_ASYM,
2061 adv);
2062}
2063
2064/**
2065 * genphy_config_eee_advert - disable unwanted eee mode advertisement
2066 * @phydev: target phy_device struct
2067 *
2068 * Description: Writes MDIO_AN_EEE_ADV after disabling unsupported energy
2069 * efficent ethernet modes. Returns 0 if the PHY's advertisement hasn't
2070 * changed, and 1 if it has changed.
2071 */
2072int genphy_config_eee_advert(struct phy_device *phydev)
2073{
2074 int err;
2075
2076 /* Nothing to disable */
2077 if (!phydev->eee_broken_modes)
2078 return 0;
2079
2080 err = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
2081 phydev->eee_broken_modes, 0);
2082 /* If the call failed, we assume that EEE is not supported */
2083 return err < 0 ? 0 : err;
2084}
2085EXPORT_SYMBOL(genphy_config_eee_advert);
2086
2087/**
2088 * genphy_setup_forced - configures/forces speed/duplex from @phydev
2089 * @phydev: target phy_device struct
2090 *
2091 * Description: Configures MII_BMCR to force speed/duplex
2092 * to the values in phydev. Assumes that the values are valid.
2093 * Please see phy_sanitize_settings().
2094 */
2095int genphy_setup_forced(struct phy_device *phydev)
2096{
2097 u16 ctl;
2098
2099 phydev->pause = 0;
2100 phydev->asym_pause = 0;
2101
2102 ctl = mii_bmcr_encode_fixed(phydev->speed, phydev->duplex);
2103
2104 return phy_modify(phydev, MII_BMCR,
2105 ~(BMCR_LOOPBACK | BMCR_ISOLATE | BMCR_PDOWN), ctl);
2106}
2107EXPORT_SYMBOL(genphy_setup_forced);
2108
2109static int genphy_setup_master_slave(struct phy_device *phydev)
2110{
2111 u16 ctl = 0;
2112
2113 if (!phydev->is_gigabit_capable)
2114 return 0;
2115
2116 switch (phydev->master_slave_set) {
2117 case MASTER_SLAVE_CFG_MASTER_PREFERRED:
2118 ctl |= CTL1000_PREFER_MASTER;
2119 break;
2120 case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
2121 break;
2122 case MASTER_SLAVE_CFG_MASTER_FORCE:
2123 ctl |= CTL1000_AS_MASTER;
2124 fallthrough;
2125 case MASTER_SLAVE_CFG_SLAVE_FORCE:
2126 ctl |= CTL1000_ENABLE_MASTER;
2127 break;
2128 case MASTER_SLAVE_CFG_UNKNOWN:
2129 case MASTER_SLAVE_CFG_UNSUPPORTED:
2130 return 0;
2131 default:
2132 phydev_warn(phydev, "Unsupported Master/Slave mode\n");
2133 return -EOPNOTSUPP;
2134 }
2135
2136 return phy_modify_changed(phydev, MII_CTRL1000,
2137 (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER |
2138 CTL1000_PREFER_MASTER), ctl);
2139}
2140
2141int genphy_read_master_slave(struct phy_device *phydev)
2142{
2143 int cfg, state;
2144 int val;
2145
2146 phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
2147 phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
2148
2149 val = phy_read(phydev, MII_CTRL1000);
2150 if (val < 0)
2151 return val;
2152
2153 if (val & CTL1000_ENABLE_MASTER) {
2154 if (val & CTL1000_AS_MASTER)
2155 cfg = MASTER_SLAVE_CFG_MASTER_FORCE;
2156 else
2157 cfg = MASTER_SLAVE_CFG_SLAVE_FORCE;
2158 } else {
2159 if (val & CTL1000_PREFER_MASTER)
2160 cfg = MASTER_SLAVE_CFG_MASTER_PREFERRED;
2161 else
2162 cfg = MASTER_SLAVE_CFG_SLAVE_PREFERRED;
2163 }
2164
2165 val = phy_read(phydev, MII_STAT1000);
2166 if (val < 0)
2167 return val;
2168
2169 if (val & LPA_1000MSFAIL) {
2170 state = MASTER_SLAVE_STATE_ERR;
2171 } else if (phydev->link) {
2172 /* this bits are valid only for active link */
2173 if (val & LPA_1000MSRES)
2174 state = MASTER_SLAVE_STATE_MASTER;
2175 else
2176 state = MASTER_SLAVE_STATE_SLAVE;
2177 } else {
2178 state = MASTER_SLAVE_STATE_UNKNOWN;
2179 }
2180
2181 phydev->master_slave_get = cfg;
2182 phydev->master_slave_state = state;
2183
2184 return 0;
2185}
2186EXPORT_SYMBOL(genphy_read_master_slave);
2187
2188/**
2189 * genphy_restart_aneg - Enable and Restart Autonegotiation
2190 * @phydev: target phy_device struct
2191 */
2192int genphy_restart_aneg(struct phy_device *phydev)
2193{
2194 /* Don't isolate the PHY if we're negotiating */
2195 return phy_modify(phydev, MII_BMCR, BMCR_ISOLATE,
2196 BMCR_ANENABLE | BMCR_ANRESTART);
2197}
2198EXPORT_SYMBOL(genphy_restart_aneg);
2199
2200/**
2201 * genphy_check_and_restart_aneg - Enable and restart auto-negotiation
2202 * @phydev: target phy_device struct
2203 * @restart: whether aneg restart is requested
2204 *
2205 * Check, and restart auto-negotiation if needed.
2206 */
2207int genphy_check_and_restart_aneg(struct phy_device *phydev, bool restart)
2208{
2209 int ret;
2210
2211 if (!restart) {
2212 /* Advertisement hasn't changed, but maybe aneg was never on to
2213 * begin with? Or maybe phy was isolated?
2214 */
2215 ret = phy_read(phydev, MII_BMCR);
2216 if (ret < 0)
2217 return ret;
2218
2219 if (!(ret & BMCR_ANENABLE) || (ret & BMCR_ISOLATE))
2220 restart = true;
2221 }
2222
2223 if (restart)
2224 return genphy_restart_aneg(phydev);
2225
2226 return 0;
2227}
2228EXPORT_SYMBOL(genphy_check_and_restart_aneg);
2229
2230/**
2231 * __genphy_config_aneg - restart auto-negotiation or write BMCR
2232 * @phydev: target phy_device struct
2233 * @changed: whether autoneg is requested
2234 *
2235 * Description: If auto-negotiation is enabled, we configure the
2236 * advertising, and then restart auto-negotiation. If it is not
2237 * enabled, then we write the BMCR.
2238 */
2239int __genphy_config_aneg(struct phy_device *phydev, bool changed)
2240{
2241 int err;
2242
2243 err = genphy_c45_an_config_eee_aneg(phydev);
2244 if (err < 0)
2245 return err;
2246 else if (err)
2247 changed = true;
2248
2249 err = genphy_setup_master_slave(phydev);
2250 if (err < 0)
2251 return err;
2252 else if (err)
2253 changed = true;
2254
2255 if (AUTONEG_ENABLE != phydev->autoneg)
2256 return genphy_setup_forced(phydev);
2257
2258 err = genphy_config_advert(phydev);
2259 if (err < 0) /* error */
2260 return err;
2261 else if (err)
2262 changed = true;
2263
2264 return genphy_check_and_restart_aneg(phydev, changed);
2265}
2266EXPORT_SYMBOL(__genphy_config_aneg);
2267
2268/**
2269 * genphy_c37_config_aneg - restart auto-negotiation or write BMCR
2270 * @phydev: target phy_device struct
2271 *
2272 * Description: If auto-negotiation is enabled, we configure the
2273 * advertising, and then restart auto-negotiation. If it is not
2274 * enabled, then we write the BMCR. This function is intended
2275 * for use with Clause 37 1000Base-X mode.
2276 */
2277int genphy_c37_config_aneg(struct phy_device *phydev)
2278{
2279 int err, changed;
2280
2281 if (phydev->autoneg != AUTONEG_ENABLE)
2282 return genphy_setup_forced(phydev);
2283
2284 err = phy_modify(phydev, MII_BMCR, BMCR_SPEED1000 | BMCR_SPEED100,
2285 BMCR_SPEED1000);
2286 if (err)
2287 return err;
2288
2289 changed = genphy_c37_config_advert(phydev);
2290 if (changed < 0) /* error */
2291 return changed;
2292
2293 if (!changed) {
2294 /* Advertisement hasn't changed, but maybe aneg was never on to
2295 * begin with? Or maybe phy was isolated?
2296 */
2297 int ctl = phy_read(phydev, MII_BMCR);
2298
2299 if (ctl < 0)
2300 return ctl;
2301
2302 if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
2303 changed = 1; /* do restart aneg */
2304 }
2305
2306 /* Only restart aneg if we are advertising something different
2307 * than we were before.
2308 */
2309 if (changed > 0)
2310 return genphy_restart_aneg(phydev);
2311
2312 return 0;
2313}
2314EXPORT_SYMBOL(genphy_c37_config_aneg);
2315
2316/**
2317 * genphy_aneg_done - return auto-negotiation status
2318 * @phydev: target phy_device struct
2319 *
2320 * Description: Reads the status register and returns 0 either if
2321 * auto-negotiation is incomplete, or if there was an error.
2322 * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
2323 */
2324int genphy_aneg_done(struct phy_device *phydev)
2325{
2326 int retval = phy_read(phydev, MII_BMSR);
2327
2328 return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
2329}
2330EXPORT_SYMBOL(genphy_aneg_done);
2331
2332/**
2333 * genphy_update_link - update link status in @phydev
2334 * @phydev: target phy_device struct
2335 *
2336 * Description: Update the value in phydev->link to reflect the
2337 * current link value. In order to do this, we need to read
2338 * the status register twice, keeping the second value.
2339 */
2340int genphy_update_link(struct phy_device *phydev)
2341{
2342 int status = 0, bmcr;
2343
2344 bmcr = phy_read(phydev, MII_BMCR);
2345 if (bmcr < 0)
2346 return bmcr;
2347
2348 /* Autoneg is being started, therefore disregard BMSR value and
2349 * report link as down.
2350 */
2351 if (bmcr & BMCR_ANRESTART)
2352 goto done;
2353
2354 /* The link state is latched low so that momentary link
2355 * drops can be detected. Do not double-read the status
2356 * in polling mode to detect such short link drops except
2357 * the link was already down.
2358 */
2359 if (!phy_polling_mode(phydev) || !phydev->link) {
2360 status = phy_read(phydev, MII_BMSR);
2361 if (status < 0)
2362 return status;
2363 else if (status & BMSR_LSTATUS)
2364 goto done;
2365 }
2366
2367 /* Read link and autonegotiation status */
2368 status = phy_read(phydev, MII_BMSR);
2369 if (status < 0)
2370 return status;
2371done:
2372 phydev->link = status & BMSR_LSTATUS ? 1 : 0;
2373 phydev->autoneg_complete = status & BMSR_ANEGCOMPLETE ? 1 : 0;
2374
2375 /* Consider the case that autoneg was started and "aneg complete"
2376 * bit has been reset, but "link up" bit not yet.
2377 */
2378 if (phydev->autoneg == AUTONEG_ENABLE && !phydev->autoneg_complete)
2379 phydev->link = 0;
2380
2381 return 0;
2382}
2383EXPORT_SYMBOL(genphy_update_link);
2384
2385int genphy_read_lpa(struct phy_device *phydev)
2386{
2387 int lpa, lpagb;
2388
2389 if (phydev->autoneg == AUTONEG_ENABLE) {
2390 if (!phydev->autoneg_complete) {
2391 mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
2392 0);
2393 mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0);
2394 return 0;
2395 }
2396
2397 if (phydev->is_gigabit_capable) {
2398 lpagb = phy_read(phydev, MII_STAT1000);
2399 if (lpagb < 0)
2400 return lpagb;
2401
2402 if (lpagb & LPA_1000MSFAIL) {
2403 int adv = phy_read(phydev, MII_CTRL1000);
2404
2405 if (adv < 0)
2406 return adv;
2407
2408 if (adv & CTL1000_ENABLE_MASTER)
2409 phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n");
2410 else
2411 phydev_err(phydev, "Master/Slave resolution failed\n");
2412 return -ENOLINK;
2413 }
2414
2415 mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
2416 lpagb);
2417 }
2418
2419 lpa = phy_read(phydev, MII_LPA);
2420 if (lpa < 0)
2421 return lpa;
2422
2423 mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
2424 } else {
2425 linkmode_zero(phydev->lp_advertising);
2426 }
2427
2428 return 0;
2429}
2430EXPORT_SYMBOL(genphy_read_lpa);
2431
2432/**
2433 * genphy_read_status_fixed - read the link parameters for !aneg mode
2434 * @phydev: target phy_device struct
2435 *
2436 * Read the current duplex and speed state for a PHY operating with
2437 * autonegotiation disabled.
2438 */
2439int genphy_read_status_fixed(struct phy_device *phydev)
2440{
2441 int bmcr = phy_read(phydev, MII_BMCR);
2442
2443 if (bmcr < 0)
2444 return bmcr;
2445
2446 if (bmcr & BMCR_FULLDPLX)
2447 phydev->duplex = DUPLEX_FULL;
2448 else
2449 phydev->duplex = DUPLEX_HALF;
2450
2451 if (bmcr & BMCR_SPEED1000)
2452 phydev->speed = SPEED_1000;
2453 else if (bmcr & BMCR_SPEED100)
2454 phydev->speed = SPEED_100;
2455 else
2456 phydev->speed = SPEED_10;
2457
2458 return 0;
2459}
2460EXPORT_SYMBOL(genphy_read_status_fixed);
2461
2462/**
2463 * genphy_read_status - check the link status and update current link state
2464 * @phydev: target phy_device struct
2465 *
2466 * Description: Check the link, then figure out the current state
2467 * by comparing what we advertise with what the link partner
2468 * advertises. Start by checking the gigabit possibilities,
2469 * then move on to 10/100.
2470 */
2471int genphy_read_status(struct phy_device *phydev)
2472{
2473 int err, old_link = phydev->link;
2474
2475 /* Update the link, but return if there was an error */
2476 err = genphy_update_link(phydev);
2477 if (err)
2478 return err;
2479
2480 /* why bother the PHY if nothing can have changed */
2481 if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
2482 return 0;
2483
2484 phydev->master_slave_get = MASTER_SLAVE_CFG_UNSUPPORTED;
2485 phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED;
2486 phydev->speed = SPEED_UNKNOWN;
2487 phydev->duplex = DUPLEX_UNKNOWN;
2488 phydev->pause = 0;
2489 phydev->asym_pause = 0;
2490
2491 if (phydev->is_gigabit_capable) {
2492 err = genphy_read_master_slave(phydev);
2493 if (err < 0)
2494 return err;
2495 }
2496
2497 err = genphy_read_lpa(phydev);
2498 if (err < 0)
2499 return err;
2500
2501 if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
2502 phy_resolve_aneg_linkmode(phydev);
2503 } else if (phydev->autoneg == AUTONEG_DISABLE) {
2504 err = genphy_read_status_fixed(phydev);
2505 if (err < 0)
2506 return err;
2507 }
2508
2509 return 0;
2510}
2511EXPORT_SYMBOL(genphy_read_status);
2512
2513/**
2514 * genphy_c37_read_status - check the link status and update current link state
2515 * @phydev: target phy_device struct
2516 *
2517 * Description: Check the link, then figure out the current state
2518 * by comparing what we advertise with what the link partner
2519 * advertises. This function is for Clause 37 1000Base-X mode.
2520 */
2521int genphy_c37_read_status(struct phy_device *phydev)
2522{
2523 int lpa, err, old_link = phydev->link;
2524
2525 /* Update the link, but return if there was an error */
2526 err = genphy_update_link(phydev);
2527 if (err)
2528 return err;
2529
2530 /* why bother the PHY if nothing can have changed */
2531 if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
2532 return 0;
2533
2534 phydev->duplex = DUPLEX_UNKNOWN;
2535 phydev->pause = 0;
2536 phydev->asym_pause = 0;
2537
2538 if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
2539 lpa = phy_read(phydev, MII_LPA);
2540 if (lpa < 0)
2541 return lpa;
2542
2543 linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
2544 phydev->lp_advertising, lpa & LPA_LPACK);
2545 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
2546 phydev->lp_advertising, lpa & LPA_1000XFULL);
2547 linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT,
2548 phydev->lp_advertising, lpa & LPA_1000XPAUSE);
2549 linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
2550 phydev->lp_advertising,
2551 lpa & LPA_1000XPAUSE_ASYM);
2552
2553 phy_resolve_aneg_linkmode(phydev);
2554 } else if (phydev->autoneg == AUTONEG_DISABLE) {
2555 int bmcr = phy_read(phydev, MII_BMCR);
2556
2557 if (bmcr < 0)
2558 return bmcr;
2559
2560 if (bmcr & BMCR_FULLDPLX)
2561 phydev->duplex = DUPLEX_FULL;
2562 else
2563 phydev->duplex = DUPLEX_HALF;
2564 }
2565
2566 return 0;
2567}
2568EXPORT_SYMBOL(genphy_c37_read_status);
2569
2570/**
2571 * genphy_soft_reset - software reset the PHY via BMCR_RESET bit
2572 * @phydev: target phy_device struct
2573 *
2574 * Description: Perform a software PHY reset using the standard
2575 * BMCR_RESET bit and poll for the reset bit to be cleared.
2576 *
2577 * Returns: 0 on success, < 0 on failure
2578 */
2579int genphy_soft_reset(struct phy_device *phydev)
2580{
2581 u16 res = BMCR_RESET;
2582 int ret;
2583
2584 if (phydev->autoneg == AUTONEG_ENABLE)
2585 res |= BMCR_ANRESTART;
2586
2587 ret = phy_modify(phydev, MII_BMCR, BMCR_ISOLATE, res);
2588 if (ret < 0)
2589 return ret;
2590
2591 /* Clause 22 states that setting bit BMCR_RESET sets control registers
2592 * to their default value. Therefore the POWER DOWN bit is supposed to
2593 * be cleared after soft reset.
2594 */
2595 phydev->suspended = 0;
2596
2597 ret = phy_poll_reset(phydev);
2598 if (ret)
2599 return ret;
2600
2601 /* BMCR may be reset to defaults */
2602 if (phydev->autoneg == AUTONEG_DISABLE)
2603 ret = genphy_setup_forced(phydev);
2604
2605 return ret;
2606}
2607EXPORT_SYMBOL(genphy_soft_reset);
2608
2609irqreturn_t genphy_handle_interrupt_no_ack(struct phy_device *phydev)
2610{
2611 /* It seems there are cases where the interrupts are handled by another
2612 * entity (ie an IRQ controller embedded inside the PHY) and do not
2613 * need any other interraction from phylib. In this case, just trigger
2614 * the state machine directly.
2615 */
2616 phy_trigger_machine(phydev);
2617
2618 return 0;
2619}
2620EXPORT_SYMBOL(genphy_handle_interrupt_no_ack);
2621
2622/**
2623 * genphy_read_abilities - read PHY abilities from Clause 22 registers
2624 * @phydev: target phy_device struct
2625 *
2626 * Description: Reads the PHY's abilities and populates
2627 * phydev->supported accordingly.
2628 *
2629 * Returns: 0 on success, < 0 on failure
2630 */
2631int genphy_read_abilities(struct phy_device *phydev)
2632{
2633 int val;
2634
2635 linkmode_set_bit_array(phy_basic_ports_array,
2636 ARRAY_SIZE(phy_basic_ports_array),
2637 phydev->supported);
2638
2639 val = phy_read(phydev, MII_BMSR);
2640 if (val < 0)
2641 return val;
2642
2643 linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported,
2644 val & BMSR_ANEGCAPABLE);
2645
2646 linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, phydev->supported,
2647 val & BMSR_100FULL);
2648 linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, phydev->supported,
2649 val & BMSR_100HALF);
2650 linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, phydev->supported,
2651 val & BMSR_10FULL);
2652 linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, phydev->supported,
2653 val & BMSR_10HALF);
2654
2655 if (val & BMSR_ESTATEN) {
2656 val = phy_read(phydev, MII_ESTATUS);
2657 if (val < 0)
2658 return val;
2659
2660 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
2661 phydev->supported, val & ESTATUS_1000_TFULL);
2662 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
2663 phydev->supported, val & ESTATUS_1000_THALF);
2664 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
2665 phydev->supported, val & ESTATUS_1000_XFULL);
2666 }
2667
2668 /* This is optional functionality. If not supported, we may get an error
2669 * which should be ignored.
2670 */
2671 genphy_c45_read_eee_abilities(phydev);
2672
2673 return 0;
2674}
2675EXPORT_SYMBOL(genphy_read_abilities);
2676
2677/* This is used for the phy device which doesn't support the MMD extended
2678 * register access, but it does have side effect when we are trying to access
2679 * the MMD register via indirect method.
2680 */
2681int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, u16 regnum)
2682{
2683 return -EOPNOTSUPP;
2684}
2685EXPORT_SYMBOL(genphy_read_mmd_unsupported);
2686
2687int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum,
2688 u16 regnum, u16 val)
2689{
2690 return -EOPNOTSUPP;
2691}
2692EXPORT_SYMBOL(genphy_write_mmd_unsupported);
2693
2694int genphy_suspend(struct phy_device *phydev)
2695{
2696 return phy_set_bits(phydev, MII_BMCR, BMCR_PDOWN);
2697}
2698EXPORT_SYMBOL(genphy_suspend);
2699
2700int genphy_resume(struct phy_device *phydev)
2701{
2702 return phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN);
2703}
2704EXPORT_SYMBOL(genphy_resume);
2705
2706int genphy_loopback(struct phy_device *phydev, bool enable)
2707{
2708 if (enable) {
2709 u16 val, ctl = BMCR_LOOPBACK;
2710 int ret;
2711
2712 ctl |= mii_bmcr_encode_fixed(phydev->speed, phydev->duplex);
2713
2714 phy_modify(phydev, MII_BMCR, ~0, ctl);
2715
2716 ret = phy_read_poll_timeout(phydev, MII_BMSR, val,
2717 val & BMSR_LSTATUS,
2718 5000, 500000, true);
2719 if (ret)
2720 return ret;
2721 } else {
2722 phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK, 0);
2723
2724 phy_config_aneg(phydev);
2725 }
2726
2727 return 0;
2728}
2729EXPORT_SYMBOL(genphy_loopback);
2730
2731/**
2732 * phy_remove_link_mode - Remove a supported link mode
2733 * @phydev: phy_device structure to remove link mode from
2734 * @link_mode: Link mode to be removed
2735 *
2736 * Description: Some MACs don't support all link modes which the PHY
2737 * does. e.g. a 1G MAC often does not support 1000Half. Add a helper
2738 * to remove a link mode.
2739 */
2740void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode)
2741{
2742 linkmode_clear_bit(link_mode, phydev->supported);
2743 phy_advertise_supported(phydev);
2744}
2745EXPORT_SYMBOL(phy_remove_link_mode);
2746
2747static void phy_copy_pause_bits(unsigned long *dst, unsigned long *src)
2748{
2749 linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, dst,
2750 linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, src));
2751 linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, dst,
2752 linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, src));
2753}
2754
2755/**
2756 * phy_advertise_supported - Advertise all supported modes
2757 * @phydev: target phy_device struct
2758 *
2759 * Description: Called to advertise all supported modes, doesn't touch
2760 * pause mode advertising.
2761 */
2762void phy_advertise_supported(struct phy_device *phydev)
2763{
2764 __ETHTOOL_DECLARE_LINK_MODE_MASK(new);
2765
2766 linkmode_copy(new, phydev->supported);
2767 phy_copy_pause_bits(new, phydev->advertising);
2768 linkmode_copy(phydev->advertising, new);
2769}
2770EXPORT_SYMBOL(phy_advertise_supported);
2771
2772/**
2773 * phy_support_sym_pause - Enable support of symmetrical pause
2774 * @phydev: target phy_device struct
2775 *
2776 * Description: Called by the MAC to indicate is supports symmetrical
2777 * Pause, but not asym pause.
2778 */
2779void phy_support_sym_pause(struct phy_device *phydev)
2780{
2781 linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported);
2782 phy_copy_pause_bits(phydev->advertising, phydev->supported);
2783}
2784EXPORT_SYMBOL(phy_support_sym_pause);
2785
2786/**
2787 * phy_support_asym_pause - Enable support of asym pause
2788 * @phydev: target phy_device struct
2789 *
2790 * Description: Called by the MAC to indicate is supports Asym Pause.
2791 */
2792void phy_support_asym_pause(struct phy_device *phydev)
2793{
2794 phy_copy_pause_bits(phydev->advertising, phydev->supported);
2795}
2796EXPORT_SYMBOL(phy_support_asym_pause);
2797
2798/**
2799 * phy_set_sym_pause - Configure symmetric Pause
2800 * @phydev: target phy_device struct
2801 * @rx: Receiver Pause is supported
2802 * @tx: Transmit Pause is supported
2803 * @autoneg: Auto neg should be used
2804 *
2805 * Description: Configure advertised Pause support depending on if
2806 * receiver pause and pause auto neg is supported. Generally called
2807 * from the set_pauseparam .ndo.
2808 */
2809void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx,
2810 bool autoneg)
2811{
2812 linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported);
2813
2814 if (rx && tx && autoneg)
2815 linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
2816 phydev->supported);
2817
2818 linkmode_copy(phydev->advertising, phydev->supported);
2819}
2820EXPORT_SYMBOL(phy_set_sym_pause);
2821
2822/**
2823 * phy_set_asym_pause - Configure Pause and Asym Pause
2824 * @phydev: target phy_device struct
2825 * @rx: Receiver Pause is supported
2826 * @tx: Transmit Pause is supported
2827 *
2828 * Description: Configure advertised Pause support depending on if
2829 * transmit and receiver pause is supported. If there has been a
2830 * change in adverting, trigger a new autoneg. Generally called from
2831 * the set_pauseparam .ndo.
2832 */
2833void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx)
2834{
2835 __ETHTOOL_DECLARE_LINK_MODE_MASK(oldadv);
2836
2837 linkmode_copy(oldadv, phydev->advertising);
2838 linkmode_set_pause(phydev->advertising, tx, rx);
2839
2840 if (!linkmode_equal(oldadv, phydev->advertising) &&
2841 phydev->autoneg)
2842 phy_start_aneg(phydev);
2843}
2844EXPORT_SYMBOL(phy_set_asym_pause);
2845
2846/**
2847 * phy_validate_pause - Test if the PHY/MAC support the pause configuration
2848 * @phydev: phy_device struct
2849 * @pp: requested pause configuration
2850 *
2851 * Description: Test if the PHY/MAC combination supports the Pause
2852 * configuration the user is requesting. Returns True if it is
2853 * supported, false otherwise.
2854 */
2855bool phy_validate_pause(struct phy_device *phydev,
2856 struct ethtool_pauseparam *pp)
2857{
2858 if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
2859 phydev->supported) && pp->rx_pause)
2860 return false;
2861
2862 if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
2863 phydev->supported) &&
2864 pp->rx_pause != pp->tx_pause)
2865 return false;
2866
2867 return true;
2868}
2869EXPORT_SYMBOL(phy_validate_pause);
2870
2871/**
2872 * phy_get_pause - resolve negotiated pause modes
2873 * @phydev: phy_device struct
2874 * @tx_pause: pointer to bool to indicate whether transmit pause should be
2875 * enabled.
2876 * @rx_pause: pointer to bool to indicate whether receive pause should be
2877 * enabled.
2878 *
2879 * Resolve and return the flow control modes according to the negotiation
2880 * result. This includes checking that we are operating in full duplex mode.
2881 * See linkmode_resolve_pause() for further details.
2882 */
2883void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause)
2884{
2885 if (phydev->duplex != DUPLEX_FULL) {
2886 *tx_pause = false;
2887 *rx_pause = false;
2888 return;
2889 }
2890
2891 return linkmode_resolve_pause(phydev->advertising,
2892 phydev->lp_advertising,
2893 tx_pause, rx_pause);
2894}
2895EXPORT_SYMBOL(phy_get_pause);
2896
2897#if IS_ENABLED(CONFIG_OF_MDIO)
2898static int phy_get_int_delay_property(struct device *dev, const char *name)
2899{
2900 s32 int_delay;
2901 int ret;
2902
2903 ret = device_property_read_u32(dev, name, &int_delay);
2904 if (ret)
2905 return ret;
2906
2907 return int_delay;
2908}
2909#else
2910static int phy_get_int_delay_property(struct device *dev, const char *name)
2911{
2912 return -EINVAL;
2913}
2914#endif
2915
2916/**
2917 * phy_get_internal_delay - returns the index of the internal delay
2918 * @phydev: phy_device struct
2919 * @dev: pointer to the devices device struct
2920 * @delay_values: array of delays the PHY supports
2921 * @size: the size of the delay array
2922 * @is_rx: boolean to indicate to get the rx internal delay
2923 *
2924 * Returns the index within the array of internal delay passed in.
2925 * If the device property is not present then the interface type is checked
2926 * if the interface defines use of internal delay then a 1 is returned otherwise
2927 * a 0 is returned.
2928 * The array must be in ascending order. If PHY does not have an ascending order
2929 * array then size = 0 and the value of the delay property is returned.
2930 * Return -EINVAL if the delay is invalid or cannot be found.
2931 */
2932s32 phy_get_internal_delay(struct phy_device *phydev, struct device *dev,
2933 const int *delay_values, int size, bool is_rx)
2934{
2935 s32 delay;
2936 int i;
2937
2938 if (is_rx) {
2939 delay = phy_get_int_delay_property(dev, "rx-internal-delay-ps");
2940 if (delay < 0 && size == 0) {
2941 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
2942 phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
2943 return 1;
2944 else
2945 return 0;
2946 }
2947
2948 } else {
2949 delay = phy_get_int_delay_property(dev, "tx-internal-delay-ps");
2950 if (delay < 0 && size == 0) {
2951 if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
2952 phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
2953 return 1;
2954 else
2955 return 0;
2956 }
2957 }
2958
2959 if (delay < 0)
2960 return delay;
2961
2962 if (delay && size == 0)
2963 return delay;
2964
2965 if (delay < delay_values[0] || delay > delay_values[size - 1]) {
2966 phydev_err(phydev, "Delay %d is out of range\n", delay);
2967 return -EINVAL;
2968 }
2969
2970 if (delay == delay_values[0])
2971 return 0;
2972
2973 for (i = 1; i < size; i++) {
2974 if (delay == delay_values[i])
2975 return i;
2976
2977 /* Find an approximate index by looking up the table */
2978 if (delay > delay_values[i - 1] &&
2979 delay < delay_values[i]) {
2980 if (delay - delay_values[i - 1] <
2981 delay_values[i] - delay)
2982 return i - 1;
2983 else
2984 return i;
2985 }
2986 }
2987
2988 phydev_err(phydev, "error finding internal delay index for %d\n",
2989 delay);
2990
2991 return -EINVAL;
2992}
2993EXPORT_SYMBOL(phy_get_internal_delay);
2994
2995static bool phy_drv_supports_irq(struct phy_driver *phydrv)
2996{
2997 return phydrv->config_intr && phydrv->handle_interrupt;
2998}
2999
3000static int phy_led_set_brightness(struct led_classdev *led_cdev,
3001 enum led_brightness value)
3002{
3003 struct phy_led *phyled = to_phy_led(led_cdev);
3004 struct phy_device *phydev = phyled->phydev;
3005 int err;
3006
3007 mutex_lock(&phydev->lock);
3008 err = phydev->drv->led_brightness_set(phydev, phyled->index, value);
3009 mutex_unlock(&phydev->lock);
3010
3011 return err;
3012}
3013
3014static int phy_led_blink_set(struct led_classdev *led_cdev,
3015 unsigned long *delay_on,
3016 unsigned long *delay_off)
3017{
3018 struct phy_led *phyled = to_phy_led(led_cdev);
3019 struct phy_device *phydev = phyled->phydev;
3020 int err;
3021
3022 mutex_lock(&phydev->lock);
3023 err = phydev->drv->led_blink_set(phydev, phyled->index,
3024 delay_on, delay_off);
3025 mutex_unlock(&phydev->lock);
3026
3027 return err;
3028}
3029
3030static __maybe_unused struct device *
3031phy_led_hw_control_get_device(struct led_classdev *led_cdev)
3032{
3033 struct phy_led *phyled = to_phy_led(led_cdev);
3034 struct phy_device *phydev = phyled->phydev;
3035
3036 if (phydev->attached_dev)
3037 return &phydev->attached_dev->dev;
3038 return NULL;
3039}
3040
3041static int __maybe_unused
3042phy_led_hw_control_get(struct led_classdev *led_cdev,
3043 unsigned long *rules)
3044{
3045 struct phy_led *phyled = to_phy_led(led_cdev);
3046 struct phy_device *phydev = phyled->phydev;
3047 int err;
3048
3049 mutex_lock(&phydev->lock);
3050 err = phydev->drv->led_hw_control_get(phydev, phyled->index, rules);
3051 mutex_unlock(&phydev->lock);
3052
3053 return err;
3054}
3055
3056static int __maybe_unused
3057phy_led_hw_control_set(struct led_classdev *led_cdev,
3058 unsigned long rules)
3059{
3060 struct phy_led *phyled = to_phy_led(led_cdev);
3061 struct phy_device *phydev = phyled->phydev;
3062 int err;
3063
3064 mutex_lock(&phydev->lock);
3065 err = phydev->drv->led_hw_control_set(phydev, phyled->index, rules);
3066 mutex_unlock(&phydev->lock);
3067
3068 return err;
3069}
3070
3071static __maybe_unused int phy_led_hw_is_supported(struct led_classdev *led_cdev,
3072 unsigned long rules)
3073{
3074 struct phy_led *phyled = to_phy_led(led_cdev);
3075 struct phy_device *phydev = phyled->phydev;
3076 int err;
3077
3078 mutex_lock(&phydev->lock);
3079 err = phydev->drv->led_hw_is_supported(phydev, phyled->index, rules);
3080 mutex_unlock(&phydev->lock);
3081
3082 return err;
3083}
3084
3085static void phy_leds_unregister(struct phy_device *phydev)
3086{
3087 struct phy_led *phyled;
3088
3089 list_for_each_entry(phyled, &phydev->leds, list) {
3090 led_classdev_unregister(&phyled->led_cdev);
3091 }
3092}
3093
3094static int of_phy_led(struct phy_device *phydev,
3095 struct device_node *led)
3096{
3097 struct device *dev = &phydev->mdio.dev;
3098 struct led_init_data init_data = {};
3099 struct led_classdev *cdev;
3100 struct phy_led *phyled;
3101 u32 index;
3102 int err;
3103
3104 phyled = devm_kzalloc(dev, sizeof(*phyled), GFP_KERNEL);
3105 if (!phyled)
3106 return -ENOMEM;
3107
3108 cdev = &phyled->led_cdev;
3109 phyled->phydev = phydev;
3110
3111 err = of_property_read_u32(led, "reg", &index);
3112 if (err)
3113 return err;
3114 if (index > U8_MAX)
3115 return -EINVAL;
3116
3117 phyled->index = index;
3118 if (phydev->drv->led_brightness_set)
3119 cdev->brightness_set_blocking = phy_led_set_brightness;
3120 if (phydev->drv->led_blink_set)
3121 cdev->blink_set = phy_led_blink_set;
3122
3123#ifdef CONFIG_LEDS_TRIGGERS
3124 if (phydev->drv->led_hw_is_supported &&
3125 phydev->drv->led_hw_control_set &&
3126 phydev->drv->led_hw_control_get) {
3127 cdev->hw_control_is_supported = phy_led_hw_is_supported;
3128 cdev->hw_control_set = phy_led_hw_control_set;
3129 cdev->hw_control_get = phy_led_hw_control_get;
3130 cdev->hw_control_trigger = "netdev";
3131 }
3132
3133 cdev->hw_control_get_device = phy_led_hw_control_get_device;
3134#endif
3135 cdev->max_brightness = 1;
3136 init_data.devicename = dev_name(&phydev->mdio.dev);
3137 init_data.fwnode = of_fwnode_handle(led);
3138 init_data.devname_mandatory = true;
3139
3140 err = led_classdev_register_ext(dev, cdev, &init_data);
3141 if (err)
3142 return err;
3143
3144 list_add(&phyled->list, &phydev->leds);
3145
3146 return 0;
3147}
3148
3149static int of_phy_leds(struct phy_device *phydev)
3150{
3151 struct device_node *node = phydev->mdio.dev.of_node;
3152 struct device_node *leds, *led;
3153 int err;
3154
3155 if (!IS_ENABLED(CONFIG_OF_MDIO))
3156 return 0;
3157
3158 if (!node)
3159 return 0;
3160
3161 leds = of_get_child_by_name(node, "leds");
3162 if (!leds)
3163 return 0;
3164
3165 for_each_available_child_of_node(leds, led) {
3166 err = of_phy_led(phydev, led);
3167 if (err) {
3168 of_node_put(led);
3169 phy_leds_unregister(phydev);
3170 return err;
3171 }
3172 }
3173
3174 return 0;
3175}
3176
3177/**
3178 * fwnode_mdio_find_device - Given a fwnode, find the mdio_device
3179 * @fwnode: pointer to the mdio_device's fwnode
3180 *
3181 * If successful, returns a pointer to the mdio_device with the embedded
3182 * struct device refcount incremented by one, or NULL on failure.
3183 * The caller should call put_device() on the mdio_device after its use.
3184 */
3185struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
3186{
3187 struct device *d;
3188
3189 if (!fwnode)
3190 return NULL;
3191
3192 d = bus_find_device_by_fwnode(&mdio_bus_type, fwnode);
3193 if (!d)
3194 return NULL;
3195
3196 return to_mdio_device(d);
3197}
3198EXPORT_SYMBOL(fwnode_mdio_find_device);
3199
3200/**
3201 * fwnode_phy_find_device - For provided phy_fwnode, find phy_device.
3202 *
3203 * @phy_fwnode: Pointer to the phy's fwnode.
3204 *
3205 * If successful, returns a pointer to the phy_device with the embedded
3206 * struct device refcount incremented by one, or NULL on failure.
3207 */
3208struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode)
3209{
3210 struct mdio_device *mdiodev;
3211
3212 mdiodev = fwnode_mdio_find_device(phy_fwnode);
3213 if (!mdiodev)
3214 return NULL;
3215
3216 if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
3217 return to_phy_device(&mdiodev->dev);
3218
3219 put_device(&mdiodev->dev);
3220
3221 return NULL;
3222}
3223EXPORT_SYMBOL(fwnode_phy_find_device);
3224
3225/**
3226 * device_phy_find_device - For the given device, get the phy_device
3227 * @dev: Pointer to the given device
3228 *
3229 * Refer return conditions of fwnode_phy_find_device().
3230 */
3231struct phy_device *device_phy_find_device(struct device *dev)
3232{
3233 return fwnode_phy_find_device(dev_fwnode(dev));
3234}
3235EXPORT_SYMBOL_GPL(device_phy_find_device);
3236
3237/**
3238 * fwnode_get_phy_node - Get the phy_node using the named reference.
3239 * @fwnode: Pointer to fwnode from which phy_node has to be obtained.
3240 *
3241 * Refer return conditions of fwnode_find_reference().
3242 * For ACPI, only "phy-handle" is supported. Legacy DT properties "phy"
3243 * and "phy-device" are not supported in ACPI. DT supports all the three
3244 * named references to the phy node.
3245 */
3246struct fwnode_handle *fwnode_get_phy_node(const struct fwnode_handle *fwnode)
3247{
3248 struct fwnode_handle *phy_node;
3249
3250 /* Only phy-handle is used for ACPI */
3251 phy_node = fwnode_find_reference(fwnode, "phy-handle", 0);
3252 if (is_acpi_node(fwnode) || !IS_ERR(phy_node))
3253 return phy_node;
3254 phy_node = fwnode_find_reference(fwnode, "phy", 0);
3255 if (IS_ERR(phy_node))
3256 phy_node = fwnode_find_reference(fwnode, "phy-device", 0);
3257 return phy_node;
3258}
3259EXPORT_SYMBOL_GPL(fwnode_get_phy_node);
3260
3261/**
3262 * phy_probe - probe and init a PHY device
3263 * @dev: device to probe and init
3264 *
3265 * Take care of setting up the phy_device structure, set the state to READY.
3266 */
3267static int phy_probe(struct device *dev)
3268{
3269 struct phy_device *phydev = to_phy_device(dev);
3270 struct device_driver *drv = phydev->mdio.dev.driver;
3271 struct phy_driver *phydrv = to_phy_driver(drv);
3272 int err = 0;
3273
3274 phydev->drv = phydrv;
3275
3276 /* Disable the interrupt if the PHY doesn't support it
3277 * but the interrupt is still a valid one
3278 */
3279 if (!phy_drv_supports_irq(phydrv) && phy_interrupt_is_valid(phydev))
3280 phydev->irq = PHY_POLL;
3281
3282 if (phydrv->flags & PHY_IS_INTERNAL)
3283 phydev->is_internal = true;
3284
3285 /* Deassert the reset signal */
3286 phy_device_reset(phydev, 0);
3287
3288 if (phydev->drv->probe) {
3289 err = phydev->drv->probe(phydev);
3290 if (err)
3291 goto out;
3292 }
3293
3294 phy_disable_interrupts(phydev);
3295
3296 /* Start out supporting everything. Eventually,
3297 * a controller will attach, and may modify one
3298 * or both of these values
3299 */
3300 if (phydrv->features) {
3301 linkmode_copy(phydev->supported, phydrv->features);
3302 genphy_c45_read_eee_abilities(phydev);
3303 }
3304 else if (phydrv->get_features)
3305 err = phydrv->get_features(phydev);
3306 else if (phydev->is_c45)
3307 err = genphy_c45_pma_read_abilities(phydev);
3308 else
3309 err = genphy_read_abilities(phydev);
3310
3311 if (err)
3312 goto out;
3313
3314 if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
3315 phydev->supported))
3316 phydev->autoneg = 0;
3317
3318 if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
3319 phydev->supported))
3320 phydev->is_gigabit_capable = 1;
3321 if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
3322 phydev->supported))
3323 phydev->is_gigabit_capable = 1;
3324
3325 of_set_phy_supported(phydev);
3326 phy_advertise_supported(phydev);
3327
3328 /* Get PHY default EEE advertising modes and handle them as potentially
3329 * safe initial configuration.
3330 */
3331 err = genphy_c45_read_eee_adv(phydev, phydev->advertising_eee);
3332 if (err)
3333 goto out;
3334
3335 /* There is no "enabled" flag. If PHY is advertising, assume it is
3336 * kind of enabled.
3337 */
3338 phydev->eee_enabled = !linkmode_empty(phydev->advertising_eee);
3339
3340 /* Some PHYs may advertise, by default, not support EEE modes. So,
3341 * we need to clean them.
3342 */
3343 if (phydev->eee_enabled)
3344 linkmode_and(phydev->advertising_eee, phydev->supported_eee,
3345 phydev->advertising_eee);
3346
3347 /* Get the EEE modes we want to prohibit. We will ask
3348 * the PHY stop advertising these mode later on
3349 */
3350 of_set_phy_eee_broken(phydev);
3351
3352 /* The Pause Frame bits indicate that the PHY can support passing
3353 * pause frames. During autonegotiation, the PHYs will determine if
3354 * they should allow pause frames to pass. The MAC driver should then
3355 * use that result to determine whether to enable flow control via
3356 * pause frames.
3357 *
3358 * Normally, PHY drivers should not set the Pause bits, and instead
3359 * allow phylib to do that. However, there may be some situations
3360 * (e.g. hardware erratum) where the driver wants to set only one
3361 * of these bits.
3362 */
3363 if (!test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported) &&
3364 !test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported)) {
3365 linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
3366 phydev->supported);
3367 linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
3368 phydev->supported);
3369 }
3370
3371 /* Set the state to READY by default */
3372 phydev->state = PHY_READY;
3373
3374 /* Get the LEDs from the device tree, and instantiate standard
3375 * LEDs for them.
3376 */
3377 if (IS_ENABLED(CONFIG_PHYLIB_LEDS))
3378 err = of_phy_leds(phydev);
3379
3380out:
3381 /* Re-assert the reset signal on error */
3382 if (err)
3383 phy_device_reset(phydev, 1);
3384
3385 return err;
3386}
3387
3388static int phy_remove(struct device *dev)
3389{
3390 struct phy_device *phydev = to_phy_device(dev);
3391
3392 cancel_delayed_work_sync(&phydev->state_queue);
3393
3394 if (IS_ENABLED(CONFIG_PHYLIB_LEDS))
3395 phy_leds_unregister(phydev);
3396
3397 phydev->state = PHY_DOWN;
3398
3399 sfp_bus_del_upstream(phydev->sfp_bus);
3400 phydev->sfp_bus = NULL;
3401
3402 if (phydev->drv && phydev->drv->remove)
3403 phydev->drv->remove(phydev);
3404
3405 /* Assert the reset signal */
3406 phy_device_reset(phydev, 1);
3407
3408 phydev->drv = NULL;
3409
3410 return 0;
3411}
3412
3413/**
3414 * phy_driver_register - register a phy_driver with the PHY layer
3415 * @new_driver: new phy_driver to register
3416 * @owner: module owning this PHY
3417 */
3418int phy_driver_register(struct phy_driver *new_driver, struct module *owner)
3419{
3420 int retval;
3421
3422 /* Either the features are hard coded, or dynamically
3423 * determined. It cannot be both.
3424 */
3425 if (WARN_ON(new_driver->features && new_driver->get_features)) {
3426 pr_err("%s: features and get_features must not both be set\n",
3427 new_driver->name);
3428 return -EINVAL;
3429 }
3430
3431 /* PHYLIB device drivers must not match using a DT compatible table
3432 * as this bypasses our checks that the mdiodev that is being matched
3433 * is backed by a struct phy_device. If such a case happens, we will
3434 * make out-of-bounds accesses and lockup in phydev->lock.
3435 */
3436 if (WARN(new_driver->mdiodrv.driver.of_match_table,
3437 "%s: driver must not provide a DT match table\n",
3438 new_driver->name))
3439 return -EINVAL;
3440
3441 new_driver->mdiodrv.flags |= MDIO_DEVICE_IS_PHY;
3442 new_driver->mdiodrv.driver.name = new_driver->name;
3443 new_driver->mdiodrv.driver.bus = &mdio_bus_type;
3444 new_driver->mdiodrv.driver.probe = phy_probe;
3445 new_driver->mdiodrv.driver.remove = phy_remove;
3446 new_driver->mdiodrv.driver.owner = owner;
3447 new_driver->mdiodrv.driver.probe_type = PROBE_FORCE_SYNCHRONOUS;
3448
3449 retval = driver_register(&new_driver->mdiodrv.driver);
3450 if (retval) {
3451 pr_err("%s: Error %d in registering driver\n",
3452 new_driver->name, retval);
3453
3454 return retval;
3455 }
3456
3457 pr_debug("%s: Registered new driver\n", new_driver->name);
3458
3459 return 0;
3460}
3461EXPORT_SYMBOL(phy_driver_register);
3462
3463int phy_drivers_register(struct phy_driver *new_driver, int n,
3464 struct module *owner)
3465{
3466 int i, ret = 0;
3467
3468 for (i = 0; i < n; i++) {
3469 ret = phy_driver_register(new_driver + i, owner);
3470 if (ret) {
3471 while (i-- > 0)
3472 phy_driver_unregister(new_driver + i);
3473 break;
3474 }
3475 }
3476 return ret;
3477}
3478EXPORT_SYMBOL(phy_drivers_register);
3479
3480void phy_driver_unregister(struct phy_driver *drv)
3481{
3482 driver_unregister(&drv->mdiodrv.driver);
3483}
3484EXPORT_SYMBOL(phy_driver_unregister);
3485
3486void phy_drivers_unregister(struct phy_driver *drv, int n)
3487{
3488 int i;
3489
3490 for (i = 0; i < n; i++)
3491 phy_driver_unregister(drv + i);
3492}
3493EXPORT_SYMBOL(phy_drivers_unregister);
3494
3495static struct phy_driver genphy_driver = {
3496 .phy_id = 0xffffffff,
3497 .phy_id_mask = 0xffffffff,
3498 .name = "Generic PHY",
3499 .get_features = genphy_read_abilities,
3500 .suspend = genphy_suspend,
3501 .resume = genphy_resume,
3502 .set_loopback = genphy_loopback,
3503};
3504
3505static const struct ethtool_phy_ops phy_ethtool_phy_ops = {
3506 .get_sset_count = phy_ethtool_get_sset_count,
3507 .get_strings = phy_ethtool_get_strings,
3508 .get_stats = phy_ethtool_get_stats,
3509 .get_plca_cfg = phy_ethtool_get_plca_cfg,
3510 .set_plca_cfg = phy_ethtool_set_plca_cfg,
3511 .get_plca_status = phy_ethtool_get_plca_status,
3512 .start_cable_test = phy_start_cable_test,
3513 .start_cable_test_tdr = phy_start_cable_test_tdr,
3514};
3515
3516static const struct phylib_stubs __phylib_stubs = {
3517 .hwtstamp_get = __phy_hwtstamp_get,
3518 .hwtstamp_set = __phy_hwtstamp_set,
3519};
3520
3521static void phylib_register_stubs(void)
3522{
3523 phylib_stubs = &__phylib_stubs;
3524}
3525
3526static void phylib_unregister_stubs(void)
3527{
3528 phylib_stubs = NULL;
3529}
3530
3531static int __init phy_init(void)
3532{
3533 int rc;
3534
3535 rtnl_lock();
3536 ethtool_set_ethtool_phy_ops(&phy_ethtool_phy_ops);
3537 phylib_register_stubs();
3538 rtnl_unlock();
3539
3540 rc = mdio_bus_init();
3541 if (rc)
3542 goto err_ethtool_phy_ops;
3543
3544 features_init();
3545
3546 rc = phy_driver_register(&genphy_c45_driver, THIS_MODULE);
3547 if (rc)
3548 goto err_mdio_bus;
3549
3550 rc = phy_driver_register(&genphy_driver, THIS_MODULE);
3551 if (rc)
3552 goto err_c45;
3553
3554 return 0;
3555
3556err_c45:
3557 phy_driver_unregister(&genphy_c45_driver);
3558err_mdio_bus:
3559 mdio_bus_exit();
3560err_ethtool_phy_ops:
3561 rtnl_lock();
3562 phylib_unregister_stubs();
3563 ethtool_set_ethtool_phy_ops(NULL);
3564 rtnl_unlock();
3565
3566 return rc;
3567}
3568
3569static void __exit phy_exit(void)
3570{
3571 phy_driver_unregister(&genphy_c45_driver);
3572 phy_driver_unregister(&genphy_driver);
3573 mdio_bus_exit();
3574 rtnl_lock();
3575 phylib_unregister_stubs();
3576 ethtool_set_ethtool_phy_ops(NULL);
3577 rtnl_unlock();
3578}
3579
3580subsys_initcall(phy_init);
3581module_exit(phy_exit);
1// SPDX-License-Identifier: GPL-2.0+
2/* Framework for finding and configuring PHYs.
3 * Also contains generic PHY driver
4 *
5 * Author: Andy Fleming
6 *
7 * Copyright (c) 2004 Freescale Semiconductor, Inc.
8 */
9
10#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
11
12#include <linux/kernel.h>
13#include <linux/string.h>
14#include <linux/errno.h>
15#include <linux/unistd.h>
16#include <linux/slab.h>
17#include <linux/interrupt.h>
18#include <linux/init.h>
19#include <linux/delay.h>
20#include <linux/netdevice.h>
21#include <linux/etherdevice.h>
22#include <linux/skbuff.h>
23#include <linux/mm.h>
24#include <linux/module.h>
25#include <linux/mii.h>
26#include <linux/ethtool.h>
27#include <linux/bitmap.h>
28#include <linux/phy.h>
29#include <linux/phy_led_triggers.h>
30#include <linux/mdio.h>
31#include <linux/io.h>
32#include <linux/uaccess.h>
33
34MODULE_DESCRIPTION("PHY library");
35MODULE_AUTHOR("Andy Fleming");
36MODULE_LICENSE("GPL");
37
38__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init;
39EXPORT_SYMBOL_GPL(phy_basic_features);
40
41__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init;
42EXPORT_SYMBOL_GPL(phy_basic_t1_features);
43
44__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init;
45EXPORT_SYMBOL_GPL(phy_gbit_features);
46
47__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init;
48EXPORT_SYMBOL_GPL(phy_gbit_fibre_features);
49
50__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_init;
51EXPORT_SYMBOL_GPL(phy_gbit_all_ports_features);
52
53__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init;
54EXPORT_SYMBOL_GPL(phy_10gbit_features);
55
56__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_fec_features) __ro_after_init;
57EXPORT_SYMBOL_GPL(phy_10gbit_fec_features);
58
59const int phy_basic_ports_array[3] = {
60 ETHTOOL_LINK_MODE_Autoneg_BIT,
61 ETHTOOL_LINK_MODE_TP_BIT,
62 ETHTOOL_LINK_MODE_MII_BIT,
63};
64EXPORT_SYMBOL_GPL(phy_basic_ports_array);
65
66const int phy_fibre_port_array[1] = {
67 ETHTOOL_LINK_MODE_FIBRE_BIT,
68};
69EXPORT_SYMBOL_GPL(phy_fibre_port_array);
70
71const int phy_all_ports_features_array[7] = {
72 ETHTOOL_LINK_MODE_Autoneg_BIT,
73 ETHTOOL_LINK_MODE_TP_BIT,
74 ETHTOOL_LINK_MODE_MII_BIT,
75 ETHTOOL_LINK_MODE_FIBRE_BIT,
76 ETHTOOL_LINK_MODE_AUI_BIT,
77 ETHTOOL_LINK_MODE_BNC_BIT,
78 ETHTOOL_LINK_MODE_Backplane_BIT,
79};
80EXPORT_SYMBOL_GPL(phy_all_ports_features_array);
81
82const int phy_10_100_features_array[4] = {
83 ETHTOOL_LINK_MODE_10baseT_Half_BIT,
84 ETHTOOL_LINK_MODE_10baseT_Full_BIT,
85 ETHTOOL_LINK_MODE_100baseT_Half_BIT,
86 ETHTOOL_LINK_MODE_100baseT_Full_BIT,
87};
88EXPORT_SYMBOL_GPL(phy_10_100_features_array);
89
90const int phy_basic_t1_features_array[2] = {
91 ETHTOOL_LINK_MODE_TP_BIT,
92 ETHTOOL_LINK_MODE_100baseT1_Full_BIT,
93};
94EXPORT_SYMBOL_GPL(phy_basic_t1_features_array);
95
96const int phy_gbit_features_array[2] = {
97 ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
98 ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
99};
100EXPORT_SYMBOL_GPL(phy_gbit_features_array);
101
102const int phy_10gbit_features_array[1] = {
103 ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
104};
105EXPORT_SYMBOL_GPL(phy_10gbit_features_array);
106
107const int phy_10gbit_fec_features_array[1] = {
108 ETHTOOL_LINK_MODE_10000baseR_FEC_BIT,
109};
110EXPORT_SYMBOL_GPL(phy_10gbit_fec_features_array);
111
112__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init;
113EXPORT_SYMBOL_GPL(phy_10gbit_full_features);
114
115static const int phy_10gbit_full_features_array[] = {
116 ETHTOOL_LINK_MODE_10baseT_Full_BIT,
117 ETHTOOL_LINK_MODE_100baseT_Full_BIT,
118 ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
119 ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
120};
121
122static void features_init(void)
123{
124 /* 10/100 half/full*/
125 linkmode_set_bit_array(phy_basic_ports_array,
126 ARRAY_SIZE(phy_basic_ports_array),
127 phy_basic_features);
128 linkmode_set_bit_array(phy_10_100_features_array,
129 ARRAY_SIZE(phy_10_100_features_array),
130 phy_basic_features);
131
132 /* 100 full, TP */
133 linkmode_set_bit_array(phy_basic_t1_features_array,
134 ARRAY_SIZE(phy_basic_t1_features_array),
135 phy_basic_t1_features);
136
137 /* 10/100 half/full + 1000 half/full */
138 linkmode_set_bit_array(phy_basic_ports_array,
139 ARRAY_SIZE(phy_basic_ports_array),
140 phy_gbit_features);
141 linkmode_set_bit_array(phy_10_100_features_array,
142 ARRAY_SIZE(phy_10_100_features_array),
143 phy_gbit_features);
144 linkmode_set_bit_array(phy_gbit_features_array,
145 ARRAY_SIZE(phy_gbit_features_array),
146 phy_gbit_features);
147
148 /* 10/100 half/full + 1000 half/full + fibre*/
149 linkmode_set_bit_array(phy_basic_ports_array,
150 ARRAY_SIZE(phy_basic_ports_array),
151 phy_gbit_fibre_features);
152 linkmode_set_bit_array(phy_10_100_features_array,
153 ARRAY_SIZE(phy_10_100_features_array),
154 phy_gbit_fibre_features);
155 linkmode_set_bit_array(phy_gbit_features_array,
156 ARRAY_SIZE(phy_gbit_features_array),
157 phy_gbit_fibre_features);
158 linkmode_set_bit_array(phy_fibre_port_array,
159 ARRAY_SIZE(phy_fibre_port_array),
160 phy_gbit_fibre_features);
161
162 /* 10/100 half/full + 1000 half/full + TP/MII/FIBRE/AUI/BNC/Backplane*/
163 linkmode_set_bit_array(phy_all_ports_features_array,
164 ARRAY_SIZE(phy_all_ports_features_array),
165 phy_gbit_all_ports_features);
166 linkmode_set_bit_array(phy_10_100_features_array,
167 ARRAY_SIZE(phy_10_100_features_array),
168 phy_gbit_all_ports_features);
169 linkmode_set_bit_array(phy_gbit_features_array,
170 ARRAY_SIZE(phy_gbit_features_array),
171 phy_gbit_all_ports_features);
172
173 /* 10/100 half/full + 1000 half/full + 10G full*/
174 linkmode_set_bit_array(phy_all_ports_features_array,
175 ARRAY_SIZE(phy_all_ports_features_array),
176 phy_10gbit_features);
177 linkmode_set_bit_array(phy_10_100_features_array,
178 ARRAY_SIZE(phy_10_100_features_array),
179 phy_10gbit_features);
180 linkmode_set_bit_array(phy_gbit_features_array,
181 ARRAY_SIZE(phy_gbit_features_array),
182 phy_10gbit_features);
183 linkmode_set_bit_array(phy_10gbit_features_array,
184 ARRAY_SIZE(phy_10gbit_features_array),
185 phy_10gbit_features);
186
187 /* 10/100/1000/10G full */
188 linkmode_set_bit_array(phy_all_ports_features_array,
189 ARRAY_SIZE(phy_all_ports_features_array),
190 phy_10gbit_full_features);
191 linkmode_set_bit_array(phy_10gbit_full_features_array,
192 ARRAY_SIZE(phy_10gbit_full_features_array),
193 phy_10gbit_full_features);
194 /* 10G FEC only */
195 linkmode_set_bit_array(phy_10gbit_fec_features_array,
196 ARRAY_SIZE(phy_10gbit_fec_features_array),
197 phy_10gbit_fec_features);
198}
199
200void phy_device_free(struct phy_device *phydev)
201{
202 put_device(&phydev->mdio.dev);
203}
204EXPORT_SYMBOL(phy_device_free);
205
206static void phy_mdio_device_free(struct mdio_device *mdiodev)
207{
208 struct phy_device *phydev;
209
210 phydev = container_of(mdiodev, struct phy_device, mdio);
211 phy_device_free(phydev);
212}
213
214static void phy_device_release(struct device *dev)
215{
216 kfree(to_phy_device(dev));
217}
218
219static void phy_mdio_device_remove(struct mdio_device *mdiodev)
220{
221 struct phy_device *phydev;
222
223 phydev = container_of(mdiodev, struct phy_device, mdio);
224 phy_device_remove(phydev);
225}
226
227static struct phy_driver genphy_driver;
228extern struct phy_driver genphy_c45_driver;
229
230static LIST_HEAD(phy_fixup_list);
231static DEFINE_MUTEX(phy_fixup_lock);
232
233#ifdef CONFIG_PM
234static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
235{
236 struct device_driver *drv = phydev->mdio.dev.driver;
237 struct phy_driver *phydrv = to_phy_driver(drv);
238 struct net_device *netdev = phydev->attached_dev;
239
240 if (!drv || !phydrv->suspend)
241 return false;
242
243 /* PHY not attached? May suspend if the PHY has not already been
244 * suspended as part of a prior call to phy_disconnect() ->
245 * phy_detach() -> phy_suspend() because the parent netdev might be the
246 * MDIO bus driver and clock gated at this point.
247 */
248 if (!netdev)
249 return !phydev->suspended;
250
251 if (netdev->wol_enabled)
252 return false;
253
254 /* As long as not all affected network drivers support the
255 * wol_enabled flag, let's check for hints that WoL is enabled.
256 * Don't suspend PHY if the attached netdev parent may wake up.
257 * The parent may point to a PCI device, as in tg3 driver.
258 */
259 if (netdev->dev.parent && device_may_wakeup(netdev->dev.parent))
260 return false;
261
262 /* Also don't suspend PHY if the netdev itself may wakeup. This
263 * is the case for devices w/o underlaying pwr. mgmt. aware bus,
264 * e.g. SoC devices.
265 */
266 if (device_may_wakeup(&netdev->dev))
267 return false;
268
269 return true;
270}
271
272static int mdio_bus_phy_suspend(struct device *dev)
273{
274 struct phy_device *phydev = to_phy_device(dev);
275
276 /* We must stop the state machine manually, otherwise it stops out of
277 * control, possibly with the phydev->lock held. Upon resume, netdev
278 * may call phy routines that try to grab the same lock, and that may
279 * lead to a deadlock.
280 */
281 if (phydev->attached_dev && phydev->adjust_link)
282 phy_stop_machine(phydev);
283
284 if (!mdio_bus_phy_may_suspend(phydev))
285 return 0;
286
287 return phy_suspend(phydev);
288}
289
290static int mdio_bus_phy_resume(struct device *dev)
291{
292 struct phy_device *phydev = to_phy_device(dev);
293 int ret;
294
295 if (!mdio_bus_phy_may_suspend(phydev))
296 goto no_resume;
297
298 ret = phy_resume(phydev);
299 if (ret < 0)
300 return ret;
301
302no_resume:
303 if (phydev->attached_dev && phydev->adjust_link)
304 phy_start_machine(phydev);
305
306 return 0;
307}
308
309static int mdio_bus_phy_restore(struct device *dev)
310{
311 struct phy_device *phydev = to_phy_device(dev);
312 struct net_device *netdev = phydev->attached_dev;
313 int ret;
314
315 if (!netdev)
316 return 0;
317
318 ret = phy_init_hw(phydev);
319 if (ret < 0)
320 return ret;
321
322 if (phydev->attached_dev && phydev->adjust_link)
323 phy_start_machine(phydev);
324
325 return 0;
326}
327
328static const struct dev_pm_ops mdio_bus_phy_pm_ops = {
329 .suspend = mdio_bus_phy_suspend,
330 .resume = mdio_bus_phy_resume,
331 .freeze = mdio_bus_phy_suspend,
332 .thaw = mdio_bus_phy_resume,
333 .restore = mdio_bus_phy_restore,
334};
335
336#define MDIO_BUS_PHY_PM_OPS (&mdio_bus_phy_pm_ops)
337
338#else
339
340#define MDIO_BUS_PHY_PM_OPS NULL
341
342#endif /* CONFIG_PM */
343
344/**
345 * phy_register_fixup - creates a new phy_fixup and adds it to the list
346 * @bus_id: A string which matches phydev->mdio.dev.bus_id (or PHY_ANY_ID)
347 * @phy_uid: Used to match against phydev->phy_id (the UID of the PHY)
348 * It can also be PHY_ANY_UID
349 * @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before
350 * comparison
351 * @run: The actual code to be run when a matching PHY is found
352 */
353int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
354 int (*run)(struct phy_device *))
355{
356 struct phy_fixup *fixup = kzalloc(sizeof(*fixup), GFP_KERNEL);
357
358 if (!fixup)
359 return -ENOMEM;
360
361 strlcpy(fixup->bus_id, bus_id, sizeof(fixup->bus_id));
362 fixup->phy_uid = phy_uid;
363 fixup->phy_uid_mask = phy_uid_mask;
364 fixup->run = run;
365
366 mutex_lock(&phy_fixup_lock);
367 list_add_tail(&fixup->list, &phy_fixup_list);
368 mutex_unlock(&phy_fixup_lock);
369
370 return 0;
371}
372EXPORT_SYMBOL(phy_register_fixup);
373
374/* Registers a fixup to be run on any PHY with the UID in phy_uid */
375int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
376 int (*run)(struct phy_device *))
377{
378 return phy_register_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask, run);
379}
380EXPORT_SYMBOL(phy_register_fixup_for_uid);
381
382/* Registers a fixup to be run on the PHY with id string bus_id */
383int phy_register_fixup_for_id(const char *bus_id,
384 int (*run)(struct phy_device *))
385{
386 return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run);
387}
388EXPORT_SYMBOL(phy_register_fixup_for_id);
389
390/**
391 * phy_unregister_fixup - remove a phy_fixup from the list
392 * @bus_id: A string matches fixup->bus_id (or PHY_ANY_ID) in phy_fixup_list
393 * @phy_uid: A phy id matches fixup->phy_id (or PHY_ANY_UID) in phy_fixup_list
394 * @phy_uid_mask: Applied to phy_uid and fixup->phy_uid before comparison
395 */
396int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask)
397{
398 struct list_head *pos, *n;
399 struct phy_fixup *fixup;
400 int ret;
401
402 ret = -ENODEV;
403
404 mutex_lock(&phy_fixup_lock);
405 list_for_each_safe(pos, n, &phy_fixup_list) {
406 fixup = list_entry(pos, struct phy_fixup, list);
407
408 if ((!strcmp(fixup->bus_id, bus_id)) &&
409 ((fixup->phy_uid & phy_uid_mask) ==
410 (phy_uid & phy_uid_mask))) {
411 list_del(&fixup->list);
412 kfree(fixup);
413 ret = 0;
414 break;
415 }
416 }
417 mutex_unlock(&phy_fixup_lock);
418
419 return ret;
420}
421EXPORT_SYMBOL(phy_unregister_fixup);
422
423/* Unregisters a fixup of any PHY with the UID in phy_uid */
424int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask)
425{
426 return phy_unregister_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask);
427}
428EXPORT_SYMBOL(phy_unregister_fixup_for_uid);
429
430/* Unregisters a fixup of the PHY with id string bus_id */
431int phy_unregister_fixup_for_id(const char *bus_id)
432{
433 return phy_unregister_fixup(bus_id, PHY_ANY_UID, 0xffffffff);
434}
435EXPORT_SYMBOL(phy_unregister_fixup_for_id);
436
437/* Returns 1 if fixup matches phydev in bus_id and phy_uid.
438 * Fixups can be set to match any in one or more fields.
439 */
440static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup)
441{
442 if (strcmp(fixup->bus_id, phydev_name(phydev)) != 0)
443 if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0)
444 return 0;
445
446 if ((fixup->phy_uid & fixup->phy_uid_mask) !=
447 (phydev->phy_id & fixup->phy_uid_mask))
448 if (fixup->phy_uid != PHY_ANY_UID)
449 return 0;
450
451 return 1;
452}
453
454/* Runs any matching fixups for this phydev */
455static int phy_scan_fixups(struct phy_device *phydev)
456{
457 struct phy_fixup *fixup;
458
459 mutex_lock(&phy_fixup_lock);
460 list_for_each_entry(fixup, &phy_fixup_list, list) {
461 if (phy_needs_fixup(phydev, fixup)) {
462 int err = fixup->run(phydev);
463
464 if (err < 0) {
465 mutex_unlock(&phy_fixup_lock);
466 return err;
467 }
468 phydev->has_fixups = true;
469 }
470 }
471 mutex_unlock(&phy_fixup_lock);
472
473 return 0;
474}
475
476static int phy_bus_match(struct device *dev, struct device_driver *drv)
477{
478 struct phy_device *phydev = to_phy_device(dev);
479 struct phy_driver *phydrv = to_phy_driver(drv);
480 const int num_ids = ARRAY_SIZE(phydev->c45_ids.device_ids);
481 int i;
482
483 if (!(phydrv->mdiodrv.flags & MDIO_DEVICE_IS_PHY))
484 return 0;
485
486 if (phydrv->match_phy_device)
487 return phydrv->match_phy_device(phydev);
488
489 if (phydev->is_c45) {
490 for (i = 1; i < num_ids; i++) {
491 if (!(phydev->c45_ids.devices_in_package & (1 << i)))
492 continue;
493
494 if ((phydrv->phy_id & phydrv->phy_id_mask) ==
495 (phydev->c45_ids.device_ids[i] &
496 phydrv->phy_id_mask))
497 return 1;
498 }
499 return 0;
500 } else {
501 return (phydrv->phy_id & phydrv->phy_id_mask) ==
502 (phydev->phy_id & phydrv->phy_id_mask);
503 }
504}
505
506static ssize_t
507phy_id_show(struct device *dev, struct device_attribute *attr, char *buf)
508{
509 struct phy_device *phydev = to_phy_device(dev);
510
511 return sprintf(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id);
512}
513static DEVICE_ATTR_RO(phy_id);
514
515static ssize_t
516phy_interface_show(struct device *dev, struct device_attribute *attr, char *buf)
517{
518 struct phy_device *phydev = to_phy_device(dev);
519 const char *mode = NULL;
520
521 if (phy_is_internal(phydev))
522 mode = "internal";
523 else
524 mode = phy_modes(phydev->interface);
525
526 return sprintf(buf, "%s\n", mode);
527}
528static DEVICE_ATTR_RO(phy_interface);
529
530static ssize_t
531phy_has_fixups_show(struct device *dev, struct device_attribute *attr,
532 char *buf)
533{
534 struct phy_device *phydev = to_phy_device(dev);
535
536 return sprintf(buf, "%d\n", phydev->has_fixups);
537}
538static DEVICE_ATTR_RO(phy_has_fixups);
539
540static struct attribute *phy_dev_attrs[] = {
541 &dev_attr_phy_id.attr,
542 &dev_attr_phy_interface.attr,
543 &dev_attr_phy_has_fixups.attr,
544 NULL,
545};
546ATTRIBUTE_GROUPS(phy_dev);
547
548static const struct device_type mdio_bus_phy_type = {
549 .name = "PHY",
550 .groups = phy_dev_groups,
551 .release = phy_device_release,
552 .pm = MDIO_BUS_PHY_PM_OPS,
553};
554
555static int phy_request_driver_module(struct phy_device *dev, int phy_id)
556{
557 int ret;
558
559 ret = request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT,
560 MDIO_ID_ARGS(phy_id));
561 /* We only check for failures in executing the usermode binary,
562 * not whether a PHY driver module exists for the PHY ID.
563 * Accept -ENOENT because this may occur in case no initramfs exists,
564 * then modprobe isn't available.
565 */
566 if (IS_ENABLED(CONFIG_MODULES) && ret < 0 && ret != -ENOENT) {
567 phydev_err(dev, "error %d loading PHY driver module for ID 0x%08x\n",
568 ret, phy_id);
569 return ret;
570 }
571
572 return 0;
573}
574
575struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
576 bool is_c45,
577 struct phy_c45_device_ids *c45_ids)
578{
579 struct phy_device *dev;
580 struct mdio_device *mdiodev;
581 int ret = 0;
582
583 /* We allocate the device, and initialize the default values */
584 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
585 if (!dev)
586 return ERR_PTR(-ENOMEM);
587
588 mdiodev = &dev->mdio;
589 mdiodev->dev.parent = &bus->dev;
590 mdiodev->dev.bus = &mdio_bus_type;
591 mdiodev->dev.type = &mdio_bus_phy_type;
592 mdiodev->bus = bus;
593 mdiodev->bus_match = phy_bus_match;
594 mdiodev->addr = addr;
595 mdiodev->flags = MDIO_DEVICE_FLAG_PHY;
596 mdiodev->device_free = phy_mdio_device_free;
597 mdiodev->device_remove = phy_mdio_device_remove;
598
599 dev->speed = 0;
600 dev->duplex = -1;
601 dev->pause = 0;
602 dev->asym_pause = 0;
603 dev->link = 0;
604 dev->interface = PHY_INTERFACE_MODE_GMII;
605
606 dev->autoneg = AUTONEG_ENABLE;
607
608 dev->is_c45 = is_c45;
609 dev->phy_id = phy_id;
610 if (c45_ids)
611 dev->c45_ids = *c45_ids;
612 dev->irq = bus->irq[addr];
613 dev_set_name(&mdiodev->dev, PHY_ID_FMT, bus->id, addr);
614
615 dev->state = PHY_DOWN;
616
617 mutex_init(&dev->lock);
618 INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
619
620 /* Request the appropriate module unconditionally; don't
621 * bother trying to do so only if it isn't already loaded,
622 * because that gets complicated. A hotplug event would have
623 * done an unconditional modprobe anyway.
624 * We don't do normal hotplug because it won't work for MDIO
625 * -- because it relies on the device staying around for long
626 * enough for the driver to get loaded. With MDIO, the NIC
627 * driver will get bored and give up as soon as it finds that
628 * there's no driver _already_ loaded.
629 */
630 if (is_c45 && c45_ids) {
631 const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
632 int i;
633
634 for (i = 1; i < num_ids; i++) {
635 if (!(c45_ids->devices_in_package & (1 << i)))
636 continue;
637
638 ret = phy_request_driver_module(dev,
639 c45_ids->device_ids[i]);
640 if (ret)
641 break;
642 }
643 } else {
644 ret = phy_request_driver_module(dev, phy_id);
645 }
646
647 if (!ret) {
648 device_initialize(&mdiodev->dev);
649 } else {
650 kfree(dev);
651 dev = ERR_PTR(ret);
652 }
653
654 return dev;
655}
656EXPORT_SYMBOL(phy_device_create);
657
658/* get_phy_c45_devs_in_pkg - reads a MMD's devices in package registers.
659 * @bus: the target MII bus
660 * @addr: PHY address on the MII bus
661 * @dev_addr: MMD address in the PHY.
662 * @devices_in_package: where to store the devices in package information.
663 *
664 * Description: reads devices in package registers of a MMD at @dev_addr
665 * from PHY at @addr on @bus.
666 *
667 * Returns: 0 on success, -EIO on failure.
668 */
669static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr,
670 u32 *devices_in_package)
671{
672 int phy_reg, reg_addr;
673
674 reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS2;
675 phy_reg = mdiobus_read(bus, addr, reg_addr);
676 if (phy_reg < 0)
677 return -EIO;
678 *devices_in_package = phy_reg << 16;
679
680 reg_addr = MII_ADDR_C45 | dev_addr << 16 | MDIO_DEVS1;
681 phy_reg = mdiobus_read(bus, addr, reg_addr);
682 if (phy_reg < 0)
683 return -EIO;
684 *devices_in_package |= phy_reg;
685
686 /* Bit 0 doesn't represent a device, it indicates c22 regs presence */
687 *devices_in_package &= ~BIT(0);
688
689 return 0;
690}
691
692/**
693 * get_phy_c45_ids - reads the specified addr for its 802.3-c45 IDs.
694 * @bus: the target MII bus
695 * @addr: PHY address on the MII bus
696 * @phy_id: where to store the ID retrieved.
697 * @c45_ids: where to store the c45 ID information.
698 *
699 * If the PHY devices-in-package appears to be valid, it and the
700 * corresponding identifiers are stored in @c45_ids, zero is stored
701 * in @phy_id. Otherwise 0xffffffff is stored in @phy_id. Returns
702 * zero on success.
703 *
704 */
705static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
706 struct phy_c45_device_ids *c45_ids) {
707 int phy_reg;
708 int i, reg_addr;
709 const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
710 u32 *devs = &c45_ids->devices_in_package;
711
712 /* Find first non-zero Devices In package. Device zero is reserved
713 * for 802.3 c45 complied PHYs, so don't probe it at first.
714 */
715 for (i = 1; i < num_ids && *devs == 0; i++) {
716 phy_reg = get_phy_c45_devs_in_pkg(bus, addr, i, devs);
717 if (phy_reg < 0)
718 return -EIO;
719
720 if ((*devs & 0x1fffffff) == 0x1fffffff) {
721 /* If mostly Fs, there is no device there,
722 * then let's continue to probe more, as some
723 * 10G PHYs have zero Devices In package,
724 * e.g. Cortina CS4315/CS4340 PHY.
725 */
726 phy_reg = get_phy_c45_devs_in_pkg(bus, addr, 0, devs);
727 if (phy_reg < 0)
728 return -EIO;
729 /* no device there, let's get out of here */
730 if ((*devs & 0x1fffffff) == 0x1fffffff) {
731 *phy_id = 0xffffffff;
732 return 0;
733 } else {
734 break;
735 }
736 }
737 }
738
739 /* Now probe Device Identifiers for each device present. */
740 for (i = 1; i < num_ids; i++) {
741 if (!(c45_ids->devices_in_package & (1 << i)))
742 continue;
743
744 reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID1;
745 phy_reg = mdiobus_read(bus, addr, reg_addr);
746 if (phy_reg < 0)
747 return -EIO;
748 c45_ids->device_ids[i] = phy_reg << 16;
749
750 reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID2;
751 phy_reg = mdiobus_read(bus, addr, reg_addr);
752 if (phy_reg < 0)
753 return -EIO;
754 c45_ids->device_ids[i] |= phy_reg;
755 }
756 *phy_id = 0;
757 return 0;
758}
759
760/**
761 * get_phy_id - reads the specified addr for its ID.
762 * @bus: the target MII bus
763 * @addr: PHY address on the MII bus
764 * @phy_id: where to store the ID retrieved.
765 * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
766 * @c45_ids: where to store the c45 ID information.
767 *
768 * Description: In the case of a 802.3-c22 PHY, reads the ID registers
769 * of the PHY at @addr on the @bus, stores it in @phy_id and returns
770 * zero on success.
771 *
772 * In the case of a 802.3-c45 PHY, get_phy_c45_ids() is invoked, and
773 * its return value is in turn returned.
774 *
775 */
776static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
777 bool is_c45, struct phy_c45_device_ids *c45_ids)
778{
779 int phy_reg;
780
781 if (is_c45)
782 return get_phy_c45_ids(bus, addr, phy_id, c45_ids);
783
784 /* Grab the bits from PHYIR1, and put them in the upper half */
785 phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
786 if (phy_reg < 0) {
787 /* returning -ENODEV doesn't stop bus scanning */
788 return (phy_reg == -EIO || phy_reg == -ENODEV) ? -ENODEV : -EIO;
789 }
790
791 *phy_id = phy_reg << 16;
792
793 /* Grab the bits from PHYIR2, and put them in the lower half */
794 phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
795 if (phy_reg < 0)
796 return -EIO;
797
798 *phy_id |= phy_reg;
799
800 return 0;
801}
802
803/**
804 * get_phy_device - reads the specified PHY device and returns its @phy_device
805 * struct
806 * @bus: the target MII bus
807 * @addr: PHY address on the MII bus
808 * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
809 *
810 * Description: Reads the ID registers of the PHY at @addr on the
811 * @bus, then allocates and returns the phy_device to represent it.
812 */
813struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
814{
815 struct phy_c45_device_ids c45_ids = {0};
816 u32 phy_id = 0;
817 int r;
818
819 r = get_phy_id(bus, addr, &phy_id, is_c45, &c45_ids);
820 if (r)
821 return ERR_PTR(r);
822
823 /* If the phy_id is mostly Fs, there is no device there */
824 if ((phy_id & 0x1fffffff) == 0x1fffffff)
825 return ERR_PTR(-ENODEV);
826
827 return phy_device_create(bus, addr, phy_id, is_c45, &c45_ids);
828}
829EXPORT_SYMBOL(get_phy_device);
830
831/**
832 * phy_device_register - Register the phy device on the MDIO bus
833 * @phydev: phy_device structure to be added to the MDIO bus
834 */
835int phy_device_register(struct phy_device *phydev)
836{
837 int err;
838
839 err = mdiobus_register_device(&phydev->mdio);
840 if (err)
841 return err;
842
843 /* Deassert the reset signal */
844 phy_device_reset(phydev, 0);
845
846 /* Run all of the fixups for this PHY */
847 err = phy_scan_fixups(phydev);
848 if (err) {
849 phydev_err(phydev, "failed to initialize\n");
850 goto out;
851 }
852
853 err = device_add(&phydev->mdio.dev);
854 if (err) {
855 phydev_err(phydev, "failed to add\n");
856 goto out;
857 }
858
859 return 0;
860
861 out:
862 /* Assert the reset signal */
863 phy_device_reset(phydev, 1);
864
865 mdiobus_unregister_device(&phydev->mdio);
866 return err;
867}
868EXPORT_SYMBOL(phy_device_register);
869
870/**
871 * phy_device_remove - Remove a previously registered phy device from the MDIO bus
872 * @phydev: phy_device structure to remove
873 *
874 * This doesn't free the phy_device itself, it merely reverses the effects
875 * of phy_device_register(). Use phy_device_free() to free the device
876 * after calling this function.
877 */
878void phy_device_remove(struct phy_device *phydev)
879{
880 device_del(&phydev->mdio.dev);
881
882 /* Assert the reset signal */
883 phy_device_reset(phydev, 1);
884
885 mdiobus_unregister_device(&phydev->mdio);
886}
887EXPORT_SYMBOL(phy_device_remove);
888
889/**
890 * phy_find_first - finds the first PHY device on the bus
891 * @bus: the target MII bus
892 */
893struct phy_device *phy_find_first(struct mii_bus *bus)
894{
895 struct phy_device *phydev;
896 int addr;
897
898 for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
899 phydev = mdiobus_get_phy(bus, addr);
900 if (phydev)
901 return phydev;
902 }
903 return NULL;
904}
905EXPORT_SYMBOL(phy_find_first);
906
907static void phy_link_change(struct phy_device *phydev, bool up, bool do_carrier)
908{
909 struct net_device *netdev = phydev->attached_dev;
910
911 if (do_carrier) {
912 if (up)
913 netif_carrier_on(netdev);
914 else
915 netif_carrier_off(netdev);
916 }
917 phydev->adjust_link(netdev);
918}
919
920/**
921 * phy_prepare_link - prepares the PHY layer to monitor link status
922 * @phydev: target phy_device struct
923 * @handler: callback function for link status change notifications
924 *
925 * Description: Tells the PHY infrastructure to handle the
926 * gory details on monitoring link status (whether through
927 * polling or an interrupt), and to call back to the
928 * connected device driver when the link status changes.
929 * If you want to monitor your own link state, don't call
930 * this function.
931 */
932static void phy_prepare_link(struct phy_device *phydev,
933 void (*handler)(struct net_device *))
934{
935 phydev->adjust_link = handler;
936}
937
938/**
939 * phy_connect_direct - connect an ethernet device to a specific phy_device
940 * @dev: the network device to connect
941 * @phydev: the pointer to the phy device
942 * @handler: callback function for state change notifications
943 * @interface: PHY device's interface
944 */
945int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
946 void (*handler)(struct net_device *),
947 phy_interface_t interface)
948{
949 int rc;
950
951 if (!dev)
952 return -EINVAL;
953
954 rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
955 if (rc)
956 return rc;
957
958 phy_prepare_link(phydev, handler);
959 if (phy_interrupt_is_valid(phydev))
960 phy_request_interrupt(phydev);
961
962 return 0;
963}
964EXPORT_SYMBOL(phy_connect_direct);
965
966/**
967 * phy_connect - connect an ethernet device to a PHY device
968 * @dev: the network device to connect
969 * @bus_id: the id string of the PHY device to connect
970 * @handler: callback function for state change notifications
971 * @interface: PHY device's interface
972 *
973 * Description: Convenience function for connecting ethernet
974 * devices to PHY devices. The default behavior is for
975 * the PHY infrastructure to handle everything, and only notify
976 * the connected driver when the link status changes. If you
977 * don't want, or can't use the provided functionality, you may
978 * choose to call only the subset of functions which provide
979 * the desired functionality.
980 */
981struct phy_device *phy_connect(struct net_device *dev, const char *bus_id,
982 void (*handler)(struct net_device *),
983 phy_interface_t interface)
984{
985 struct phy_device *phydev;
986 struct device *d;
987 int rc;
988
989 /* Search the list of PHY devices on the mdio bus for the
990 * PHY with the requested name
991 */
992 d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id);
993 if (!d) {
994 pr_err("PHY %s not found\n", bus_id);
995 return ERR_PTR(-ENODEV);
996 }
997 phydev = to_phy_device(d);
998
999 rc = phy_connect_direct(dev, phydev, handler, interface);
1000 put_device(d);
1001 if (rc)
1002 return ERR_PTR(rc);
1003
1004 return phydev;
1005}
1006EXPORT_SYMBOL(phy_connect);
1007
1008/**
1009 * phy_disconnect - disable interrupts, stop state machine, and detach a PHY
1010 * device
1011 * @phydev: target phy_device struct
1012 */
1013void phy_disconnect(struct phy_device *phydev)
1014{
1015 if (phy_is_started(phydev))
1016 phy_stop(phydev);
1017
1018 if (phy_interrupt_is_valid(phydev))
1019 phy_free_interrupt(phydev);
1020
1021 phydev->adjust_link = NULL;
1022
1023 phy_detach(phydev);
1024}
1025EXPORT_SYMBOL(phy_disconnect);
1026
1027/**
1028 * phy_poll_reset - Safely wait until a PHY reset has properly completed
1029 * @phydev: The PHY device to poll
1030 *
1031 * Description: According to IEEE 802.3, Section 2, Subsection 22.2.4.1.1, as
1032 * published in 2008, a PHY reset may take up to 0.5 seconds. The MII BMCR
1033 * register must be polled until the BMCR_RESET bit clears.
1034 *
1035 * Furthermore, any attempts to write to PHY registers may have no effect
1036 * or even generate MDIO bus errors until this is complete.
1037 *
1038 * Some PHYs (such as the Marvell 88E1111) don't entirely conform to the
1039 * standard and do not fully reset after the BMCR_RESET bit is set, and may
1040 * even *REQUIRE* a soft-reset to properly restart autonegotiation. In an
1041 * effort to support such broken PHYs, this function is separate from the
1042 * standard phy_init_hw() which will zero all the other bits in the BMCR
1043 * and reapply all driver-specific and board-specific fixups.
1044 */
1045static int phy_poll_reset(struct phy_device *phydev)
1046{
1047 /* Poll until the reset bit clears (50ms per retry == 0.6 sec) */
1048 unsigned int retries = 12;
1049 int ret;
1050
1051 do {
1052 msleep(50);
1053 ret = phy_read(phydev, MII_BMCR);
1054 if (ret < 0)
1055 return ret;
1056 } while (ret & BMCR_RESET && --retries);
1057 if (ret & BMCR_RESET)
1058 return -ETIMEDOUT;
1059
1060 /* Some chips (smsc911x) may still need up to another 1ms after the
1061 * BMCR_RESET bit is cleared before they are usable.
1062 */
1063 msleep(1);
1064 return 0;
1065}
1066
1067int phy_init_hw(struct phy_device *phydev)
1068{
1069 int ret = 0;
1070
1071 /* Deassert the reset signal */
1072 phy_device_reset(phydev, 0);
1073
1074 if (!phydev->drv)
1075 return 0;
1076
1077 if (phydev->drv->soft_reset)
1078 ret = phydev->drv->soft_reset(phydev);
1079
1080 if (ret < 0)
1081 return ret;
1082
1083 ret = phy_scan_fixups(phydev);
1084 if (ret < 0)
1085 return ret;
1086
1087 if (phydev->drv->config_init)
1088 ret = phydev->drv->config_init(phydev);
1089
1090 return ret;
1091}
1092EXPORT_SYMBOL(phy_init_hw);
1093
1094void phy_attached_info(struct phy_device *phydev)
1095{
1096 phy_attached_print(phydev, NULL);
1097}
1098EXPORT_SYMBOL(phy_attached_info);
1099
1100#define ATTACHED_FMT "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%s)"
1101void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
1102{
1103 const char *drv_name = phydev->drv ? phydev->drv->name : "unbound";
1104 char *irq_str;
1105 char irq_num[8];
1106
1107 switch(phydev->irq) {
1108 case PHY_POLL:
1109 irq_str = "POLL";
1110 break;
1111 case PHY_IGNORE_INTERRUPT:
1112 irq_str = "IGNORE";
1113 break;
1114 default:
1115 snprintf(irq_num, sizeof(irq_num), "%d", phydev->irq);
1116 irq_str = irq_num;
1117 break;
1118 }
1119
1120
1121 if (!fmt) {
1122 phydev_info(phydev, ATTACHED_FMT "\n",
1123 drv_name, phydev_name(phydev),
1124 irq_str);
1125 } else {
1126 va_list ap;
1127
1128 phydev_info(phydev, ATTACHED_FMT,
1129 drv_name, phydev_name(phydev),
1130 irq_str);
1131
1132 va_start(ap, fmt);
1133 vprintk(fmt, ap);
1134 va_end(ap);
1135 }
1136}
1137EXPORT_SYMBOL(phy_attached_print);
1138
1139static void phy_sysfs_create_links(struct phy_device *phydev)
1140{
1141 struct net_device *dev = phydev->attached_dev;
1142 int err;
1143
1144 if (!dev)
1145 return;
1146
1147 err = sysfs_create_link(&phydev->mdio.dev.kobj, &dev->dev.kobj,
1148 "attached_dev");
1149 if (err)
1150 return;
1151
1152 err = sysfs_create_link_nowarn(&dev->dev.kobj,
1153 &phydev->mdio.dev.kobj,
1154 "phydev");
1155 if (err) {
1156 dev_err(&dev->dev, "could not add device link to %s err %d\n",
1157 kobject_name(&phydev->mdio.dev.kobj),
1158 err);
1159 /* non-fatal - some net drivers can use one netdevice
1160 * with more then one phy
1161 */
1162 }
1163
1164 phydev->sysfs_links = true;
1165}
1166
1167static ssize_t
1168phy_standalone_show(struct device *dev, struct device_attribute *attr,
1169 char *buf)
1170{
1171 struct phy_device *phydev = to_phy_device(dev);
1172
1173 return sprintf(buf, "%d\n", !phydev->attached_dev);
1174}
1175static DEVICE_ATTR_RO(phy_standalone);
1176
1177/**
1178 * phy_attach_direct - attach a network device to a given PHY device pointer
1179 * @dev: network device to attach
1180 * @phydev: Pointer to phy_device to attach
1181 * @flags: PHY device's dev_flags
1182 * @interface: PHY device's interface
1183 *
1184 * Description: Called by drivers to attach to a particular PHY
1185 * device. The phy_device is found, and properly hooked up
1186 * to the phy_driver. If no driver is attached, then a
1187 * generic driver is used. The phy_device is given a ptr to
1188 * the attaching device, and given a callback for link status
1189 * change. The phy_device is returned to the attaching driver.
1190 * This function takes a reference on the phy device.
1191 */
1192int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
1193 u32 flags, phy_interface_t interface)
1194{
1195 struct mii_bus *bus = phydev->mdio.bus;
1196 struct device *d = &phydev->mdio.dev;
1197 struct module *ndev_owner = NULL;
1198 bool using_genphy = false;
1199 int err;
1200
1201 /* For Ethernet device drivers that register their own MDIO bus, we
1202 * will have bus->owner match ndev_mod, so we do not want to increment
1203 * our own module->refcnt here, otherwise we would not be able to
1204 * unload later on.
1205 */
1206 if (dev)
1207 ndev_owner = dev->dev.parent->driver->owner;
1208 if (ndev_owner != bus->owner && !try_module_get(bus->owner)) {
1209 phydev_err(phydev, "failed to get the bus module\n");
1210 return -EIO;
1211 }
1212
1213 get_device(d);
1214
1215 /* Assume that if there is no driver, that it doesn't
1216 * exist, and we should use the genphy driver.
1217 */
1218 if (!d->driver) {
1219 if (phydev->is_c45)
1220 d->driver = &genphy_c45_driver.mdiodrv.driver;
1221 else
1222 d->driver = &genphy_driver.mdiodrv.driver;
1223
1224 using_genphy = true;
1225 }
1226
1227 if (!try_module_get(d->driver->owner)) {
1228 phydev_err(phydev, "failed to get the device driver module\n");
1229 err = -EIO;
1230 goto error_put_device;
1231 }
1232
1233 if (using_genphy) {
1234 err = d->driver->probe(d);
1235 if (err >= 0)
1236 err = device_bind_driver(d);
1237
1238 if (err)
1239 goto error_module_put;
1240 }
1241
1242 if (phydev->attached_dev) {
1243 dev_err(&dev->dev, "PHY already attached\n");
1244 err = -EBUSY;
1245 goto error;
1246 }
1247
1248 phydev->phy_link_change = phy_link_change;
1249 if (dev) {
1250 phydev->attached_dev = dev;
1251 dev->phydev = phydev;
1252 }
1253
1254 /* Some Ethernet drivers try to connect to a PHY device before
1255 * calling register_netdevice() -> netdev_register_kobject() and
1256 * does the dev->dev.kobj initialization. Here we only check for
1257 * success which indicates that the network device kobject is
1258 * ready. Once we do that we still need to keep track of whether
1259 * links were successfully set up or not for phy_detach() to
1260 * remove them accordingly.
1261 */
1262 phydev->sysfs_links = false;
1263
1264 phy_sysfs_create_links(phydev);
1265
1266 if (!phydev->attached_dev) {
1267 err = sysfs_create_file(&phydev->mdio.dev.kobj,
1268 &dev_attr_phy_standalone.attr);
1269 if (err)
1270 phydev_err(phydev, "error creating 'phy_standalone' sysfs entry\n");
1271 }
1272
1273 phydev->dev_flags = flags;
1274
1275 phydev->interface = interface;
1276
1277 phydev->state = PHY_READY;
1278
1279 /* Initial carrier state is off as the phy is about to be
1280 * (re)initialized.
1281 */
1282 if (dev)
1283 netif_carrier_off(phydev->attached_dev);
1284
1285 /* Do initial configuration here, now that
1286 * we have certain key parameters
1287 * (dev_flags and interface)
1288 */
1289 err = phy_init_hw(phydev);
1290 if (err)
1291 goto error;
1292
1293 phy_resume(phydev);
1294 phy_led_triggers_register(phydev);
1295
1296 return err;
1297
1298error:
1299 /* phy_detach() does all of the cleanup below */
1300 phy_detach(phydev);
1301 return err;
1302
1303error_module_put:
1304 module_put(d->driver->owner);
1305error_put_device:
1306 put_device(d);
1307 if (ndev_owner != bus->owner)
1308 module_put(bus->owner);
1309 return err;
1310}
1311EXPORT_SYMBOL(phy_attach_direct);
1312
1313/**
1314 * phy_attach - attach a network device to a particular PHY device
1315 * @dev: network device to attach
1316 * @bus_id: Bus ID of PHY device to attach
1317 * @interface: PHY device's interface
1318 *
1319 * Description: Same as phy_attach_direct() except that a PHY bus_id
1320 * string is passed instead of a pointer to a struct phy_device.
1321 */
1322struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
1323 phy_interface_t interface)
1324{
1325 struct bus_type *bus = &mdio_bus_type;
1326 struct phy_device *phydev;
1327 struct device *d;
1328 int rc;
1329
1330 if (!dev)
1331 return ERR_PTR(-EINVAL);
1332
1333 /* Search the list of PHY devices on the mdio bus for the
1334 * PHY with the requested name
1335 */
1336 d = bus_find_device_by_name(bus, NULL, bus_id);
1337 if (!d) {
1338 pr_err("PHY %s not found\n", bus_id);
1339 return ERR_PTR(-ENODEV);
1340 }
1341 phydev = to_phy_device(d);
1342
1343 rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
1344 put_device(d);
1345 if (rc)
1346 return ERR_PTR(rc);
1347
1348 return phydev;
1349}
1350EXPORT_SYMBOL(phy_attach);
1351
1352static bool phy_driver_is_genphy_kind(struct phy_device *phydev,
1353 struct device_driver *driver)
1354{
1355 struct device *d = &phydev->mdio.dev;
1356 bool ret = false;
1357
1358 if (!phydev->drv)
1359 return ret;
1360
1361 get_device(d);
1362 ret = d->driver == driver;
1363 put_device(d);
1364
1365 return ret;
1366}
1367
1368bool phy_driver_is_genphy(struct phy_device *phydev)
1369{
1370 return phy_driver_is_genphy_kind(phydev,
1371 &genphy_driver.mdiodrv.driver);
1372}
1373EXPORT_SYMBOL_GPL(phy_driver_is_genphy);
1374
1375bool phy_driver_is_genphy_10g(struct phy_device *phydev)
1376{
1377 return phy_driver_is_genphy_kind(phydev,
1378 &genphy_c45_driver.mdiodrv.driver);
1379}
1380EXPORT_SYMBOL_GPL(phy_driver_is_genphy_10g);
1381
1382/**
1383 * phy_detach - detach a PHY device from its network device
1384 * @phydev: target phy_device struct
1385 *
1386 * This detaches the phy device from its network device and the phy
1387 * driver, and drops the reference count taken in phy_attach_direct().
1388 */
1389void phy_detach(struct phy_device *phydev)
1390{
1391 struct net_device *dev = phydev->attached_dev;
1392 struct module *ndev_owner = NULL;
1393 struct mii_bus *bus;
1394
1395 if (phydev->sysfs_links) {
1396 if (dev)
1397 sysfs_remove_link(&dev->dev.kobj, "phydev");
1398 sysfs_remove_link(&phydev->mdio.dev.kobj, "attached_dev");
1399 }
1400
1401 if (!phydev->attached_dev)
1402 sysfs_remove_file(&phydev->mdio.dev.kobj,
1403 &dev_attr_phy_standalone.attr);
1404
1405 phy_suspend(phydev);
1406 if (dev) {
1407 phydev->attached_dev->phydev = NULL;
1408 phydev->attached_dev = NULL;
1409 }
1410 phydev->phylink = NULL;
1411
1412 phy_led_triggers_unregister(phydev);
1413
1414 module_put(phydev->mdio.dev.driver->owner);
1415
1416 /* If the device had no specific driver before (i.e. - it
1417 * was using the generic driver), we unbind the device
1418 * from the generic driver so that there's a chance a
1419 * real driver could be loaded
1420 */
1421 if (phy_driver_is_genphy(phydev) ||
1422 phy_driver_is_genphy_10g(phydev))
1423 device_release_driver(&phydev->mdio.dev);
1424
1425 /*
1426 * The phydev might go away on the put_device() below, so avoid
1427 * a use-after-free bug by reading the underlying bus first.
1428 */
1429 bus = phydev->mdio.bus;
1430
1431 put_device(&phydev->mdio.dev);
1432 if (dev)
1433 ndev_owner = dev->dev.parent->driver->owner;
1434 if (ndev_owner != bus->owner)
1435 module_put(bus->owner);
1436
1437 /* Assert the reset signal */
1438 phy_device_reset(phydev, 1);
1439}
1440EXPORT_SYMBOL(phy_detach);
1441
1442int phy_suspend(struct phy_device *phydev)
1443{
1444 struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver);
1445 struct net_device *netdev = phydev->attached_dev;
1446 struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
1447 int ret = 0;
1448
1449 /* If the device has WOL enabled, we cannot suspend the PHY */
1450 phy_ethtool_get_wol(phydev, &wol);
1451 if (wol.wolopts || (netdev && netdev->wol_enabled))
1452 return -EBUSY;
1453
1454 if (phydev->drv && phydrv->suspend)
1455 ret = phydrv->suspend(phydev);
1456
1457 if (ret)
1458 return ret;
1459
1460 phydev->suspended = true;
1461
1462 return ret;
1463}
1464EXPORT_SYMBOL(phy_suspend);
1465
1466int __phy_resume(struct phy_device *phydev)
1467{
1468 struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver);
1469 int ret = 0;
1470
1471 WARN_ON(!mutex_is_locked(&phydev->lock));
1472
1473 if (phydev->drv && phydrv->resume)
1474 ret = phydrv->resume(phydev);
1475
1476 if (ret)
1477 return ret;
1478
1479 phydev->suspended = false;
1480
1481 return ret;
1482}
1483EXPORT_SYMBOL(__phy_resume);
1484
1485int phy_resume(struct phy_device *phydev)
1486{
1487 int ret;
1488
1489 mutex_lock(&phydev->lock);
1490 ret = __phy_resume(phydev);
1491 mutex_unlock(&phydev->lock);
1492
1493 return ret;
1494}
1495EXPORT_SYMBOL(phy_resume);
1496
1497int phy_loopback(struct phy_device *phydev, bool enable)
1498{
1499 struct phy_driver *phydrv = to_phy_driver(phydev->mdio.dev.driver);
1500 int ret = 0;
1501
1502 mutex_lock(&phydev->lock);
1503
1504 if (enable && phydev->loopback_enabled) {
1505 ret = -EBUSY;
1506 goto out;
1507 }
1508
1509 if (!enable && !phydev->loopback_enabled) {
1510 ret = -EINVAL;
1511 goto out;
1512 }
1513
1514 if (phydev->drv && phydrv->set_loopback)
1515 ret = phydrv->set_loopback(phydev, enable);
1516 else
1517 ret = -EOPNOTSUPP;
1518
1519 if (ret)
1520 goto out;
1521
1522 phydev->loopback_enabled = enable;
1523
1524out:
1525 mutex_unlock(&phydev->lock);
1526 return ret;
1527}
1528EXPORT_SYMBOL(phy_loopback);
1529
1530/**
1531 * phy_reset_after_clk_enable - perform a PHY reset if needed
1532 * @phydev: target phy_device struct
1533 *
1534 * Description: Some PHYs are known to need a reset after their refclk was
1535 * enabled. This function evaluates the flags and perform the reset if it's
1536 * needed. Returns < 0 on error, 0 if the phy wasn't reset and 1 if the phy
1537 * was reset.
1538 */
1539int phy_reset_after_clk_enable(struct phy_device *phydev)
1540{
1541 if (!phydev || !phydev->drv)
1542 return -ENODEV;
1543
1544 if (phydev->drv->flags & PHY_RST_AFTER_CLK_EN) {
1545 phy_device_reset(phydev, 1);
1546 phy_device_reset(phydev, 0);
1547 return 1;
1548 }
1549
1550 return 0;
1551}
1552EXPORT_SYMBOL(phy_reset_after_clk_enable);
1553
1554/* Generic PHY support and helper functions */
1555
1556/**
1557 * genphy_config_advert - sanitize and advertise auto-negotiation parameters
1558 * @phydev: target phy_device struct
1559 *
1560 * Description: Writes MII_ADVERTISE with the appropriate values,
1561 * after sanitizing the values to make sure we only advertise
1562 * what is supported. Returns < 0 on error, 0 if the PHY's advertisement
1563 * hasn't changed, and > 0 if it has changed.
1564 */
1565static int genphy_config_advert(struct phy_device *phydev)
1566{
1567 int err, bmsr, changed = 0;
1568 u32 adv;
1569
1570 /* Only allow advertising what this PHY supports */
1571 linkmode_and(phydev->advertising, phydev->advertising,
1572 phydev->supported);
1573
1574 adv = linkmode_adv_to_mii_adv_t(phydev->advertising);
1575
1576 /* Setup standard advertisement */
1577 err = phy_modify_changed(phydev, MII_ADVERTISE,
1578 ADVERTISE_ALL | ADVERTISE_100BASE4 |
1579 ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
1580 adv);
1581 if (err < 0)
1582 return err;
1583 if (err > 0)
1584 changed = 1;
1585
1586 bmsr = phy_read(phydev, MII_BMSR);
1587 if (bmsr < 0)
1588 return bmsr;
1589
1590 /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all
1591 * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a
1592 * logical 1.
1593 */
1594 if (!(bmsr & BMSR_ESTATEN))
1595 return changed;
1596
1597 adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
1598
1599 err = phy_modify_changed(phydev, MII_CTRL1000,
1600 ADVERTISE_1000FULL | ADVERTISE_1000HALF,
1601 adv);
1602 if (err < 0)
1603 return err;
1604 if (err > 0)
1605 changed = 1;
1606
1607 return changed;
1608}
1609
1610/**
1611 * genphy_config_eee_advert - disable unwanted eee mode advertisement
1612 * @phydev: target phy_device struct
1613 *
1614 * Description: Writes MDIO_AN_EEE_ADV after disabling unsupported energy
1615 * efficent ethernet modes. Returns 0 if the PHY's advertisement hasn't
1616 * changed, and 1 if it has changed.
1617 */
1618int genphy_config_eee_advert(struct phy_device *phydev)
1619{
1620 int err;
1621
1622 /* Nothing to disable */
1623 if (!phydev->eee_broken_modes)
1624 return 0;
1625
1626 err = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
1627 phydev->eee_broken_modes, 0);
1628 /* If the call failed, we assume that EEE is not supported */
1629 return err < 0 ? 0 : err;
1630}
1631EXPORT_SYMBOL(genphy_config_eee_advert);
1632
1633/**
1634 * genphy_setup_forced - configures/forces speed/duplex from @phydev
1635 * @phydev: target phy_device struct
1636 *
1637 * Description: Configures MII_BMCR to force speed/duplex
1638 * to the values in phydev. Assumes that the values are valid.
1639 * Please see phy_sanitize_settings().
1640 */
1641int genphy_setup_forced(struct phy_device *phydev)
1642{
1643 u16 ctl = 0;
1644
1645 phydev->pause = 0;
1646 phydev->asym_pause = 0;
1647
1648 if (SPEED_1000 == phydev->speed)
1649 ctl |= BMCR_SPEED1000;
1650 else if (SPEED_100 == phydev->speed)
1651 ctl |= BMCR_SPEED100;
1652
1653 if (DUPLEX_FULL == phydev->duplex)
1654 ctl |= BMCR_FULLDPLX;
1655
1656 return phy_modify(phydev, MII_BMCR,
1657 ~(BMCR_LOOPBACK | BMCR_ISOLATE | BMCR_PDOWN), ctl);
1658}
1659EXPORT_SYMBOL(genphy_setup_forced);
1660
1661/**
1662 * genphy_restart_aneg - Enable and Restart Autonegotiation
1663 * @phydev: target phy_device struct
1664 */
1665int genphy_restart_aneg(struct phy_device *phydev)
1666{
1667 /* Don't isolate the PHY if we're negotiating */
1668 return phy_modify(phydev, MII_BMCR, BMCR_ISOLATE,
1669 BMCR_ANENABLE | BMCR_ANRESTART);
1670}
1671EXPORT_SYMBOL(genphy_restart_aneg);
1672
1673/**
1674 * __genphy_config_aneg - restart auto-negotiation or write BMCR
1675 * @phydev: target phy_device struct
1676 * @changed: whether autoneg is requested
1677 *
1678 * Description: If auto-negotiation is enabled, we configure the
1679 * advertising, and then restart auto-negotiation. If it is not
1680 * enabled, then we write the BMCR.
1681 */
1682int __genphy_config_aneg(struct phy_device *phydev, bool changed)
1683{
1684 int err;
1685
1686 if (genphy_config_eee_advert(phydev))
1687 changed = true;
1688
1689 if (AUTONEG_ENABLE != phydev->autoneg)
1690 return genphy_setup_forced(phydev);
1691
1692 err = genphy_config_advert(phydev);
1693 if (err < 0) /* error */
1694 return err;
1695 else if (err)
1696 changed = true;
1697
1698 if (!changed) {
1699 /* Advertisement hasn't changed, but maybe aneg was never on to
1700 * begin with? Or maybe phy was isolated?
1701 */
1702 int ctl = phy_read(phydev, MII_BMCR);
1703
1704 if (ctl < 0)
1705 return ctl;
1706
1707 if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
1708 changed = true; /* do restart aneg */
1709 }
1710
1711 /* Only restart aneg if we are advertising something different
1712 * than we were before.
1713 */
1714 return changed ? genphy_restart_aneg(phydev) : 0;
1715}
1716EXPORT_SYMBOL(__genphy_config_aneg);
1717
1718/**
1719 * genphy_aneg_done - return auto-negotiation status
1720 * @phydev: target phy_device struct
1721 *
1722 * Description: Reads the status register and returns 0 either if
1723 * auto-negotiation is incomplete, or if there was an error.
1724 * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
1725 */
1726int genphy_aneg_done(struct phy_device *phydev)
1727{
1728 int retval = phy_read(phydev, MII_BMSR);
1729
1730 return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
1731}
1732EXPORT_SYMBOL(genphy_aneg_done);
1733
1734/**
1735 * genphy_update_link - update link status in @phydev
1736 * @phydev: target phy_device struct
1737 *
1738 * Description: Update the value in phydev->link to reflect the
1739 * current link value. In order to do this, we need to read
1740 * the status register twice, keeping the second value.
1741 */
1742int genphy_update_link(struct phy_device *phydev)
1743{
1744 int status = 0, bmcr;
1745
1746 bmcr = phy_read(phydev, MII_BMCR);
1747 if (bmcr < 0)
1748 return bmcr;
1749
1750 /* Autoneg is being started, therefore disregard BMSR value and
1751 * report link as down.
1752 */
1753 if (bmcr & BMCR_ANRESTART)
1754 goto done;
1755
1756 /* The link state is latched low so that momentary link
1757 * drops can be detected. Do not double-read the status
1758 * in polling mode to detect such short link drops.
1759 */
1760 if (!phy_polling_mode(phydev)) {
1761 status = phy_read(phydev, MII_BMSR);
1762 if (status < 0)
1763 return status;
1764 else if (status & BMSR_LSTATUS)
1765 goto done;
1766 }
1767
1768 /* Read link and autonegotiation status */
1769 status = phy_read(phydev, MII_BMSR);
1770 if (status < 0)
1771 return status;
1772done:
1773 phydev->link = status & BMSR_LSTATUS ? 1 : 0;
1774 phydev->autoneg_complete = status & BMSR_ANEGCOMPLETE ? 1 : 0;
1775
1776 /* Consider the case that autoneg was started and "aneg complete"
1777 * bit has been reset, but "link up" bit not yet.
1778 */
1779 if (phydev->autoneg == AUTONEG_ENABLE && !phydev->autoneg_complete)
1780 phydev->link = 0;
1781
1782 return 0;
1783}
1784EXPORT_SYMBOL(genphy_update_link);
1785
1786int genphy_read_lpa(struct phy_device *phydev)
1787{
1788 int lpa, lpagb;
1789
1790 if (phydev->autoneg == AUTONEG_ENABLE) {
1791 if (!phydev->autoneg_complete) {
1792 mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
1793 0);
1794 mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0);
1795 return 0;
1796 }
1797
1798 if (phydev->is_gigabit_capable) {
1799 lpagb = phy_read(phydev, MII_STAT1000);
1800 if (lpagb < 0)
1801 return lpagb;
1802
1803 if (lpagb & LPA_1000MSFAIL) {
1804 int adv = phy_read(phydev, MII_CTRL1000);
1805
1806 if (adv < 0)
1807 return adv;
1808
1809 if (adv & CTL1000_ENABLE_MASTER)
1810 phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n");
1811 else
1812 phydev_err(phydev, "Master/Slave resolution failed\n");
1813 return -ENOLINK;
1814 }
1815
1816 mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
1817 lpagb);
1818 }
1819
1820 lpa = phy_read(phydev, MII_LPA);
1821 if (lpa < 0)
1822 return lpa;
1823
1824 mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
1825 } else {
1826 linkmode_zero(phydev->lp_advertising);
1827 }
1828
1829 return 0;
1830}
1831EXPORT_SYMBOL(genphy_read_lpa);
1832
1833/**
1834 * genphy_read_status - check the link status and update current link state
1835 * @phydev: target phy_device struct
1836 *
1837 * Description: Check the link, then figure out the current state
1838 * by comparing what we advertise with what the link partner
1839 * advertises. Start by checking the gigabit possibilities,
1840 * then move on to 10/100.
1841 */
1842int genphy_read_status(struct phy_device *phydev)
1843{
1844 int err, old_link = phydev->link;
1845
1846 /* Update the link, but return if there was an error */
1847 err = genphy_update_link(phydev);
1848 if (err)
1849 return err;
1850
1851 /* why bother the PHY if nothing can have changed */
1852 if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
1853 return 0;
1854
1855 phydev->speed = SPEED_UNKNOWN;
1856 phydev->duplex = DUPLEX_UNKNOWN;
1857 phydev->pause = 0;
1858 phydev->asym_pause = 0;
1859
1860 err = genphy_read_lpa(phydev);
1861 if (err < 0)
1862 return err;
1863
1864 if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
1865 phy_resolve_aneg_linkmode(phydev);
1866 } else if (phydev->autoneg == AUTONEG_DISABLE) {
1867 int bmcr = phy_read(phydev, MII_BMCR);
1868
1869 if (bmcr < 0)
1870 return bmcr;
1871
1872 if (bmcr & BMCR_FULLDPLX)
1873 phydev->duplex = DUPLEX_FULL;
1874 else
1875 phydev->duplex = DUPLEX_HALF;
1876
1877 if (bmcr & BMCR_SPEED1000)
1878 phydev->speed = SPEED_1000;
1879 else if (bmcr & BMCR_SPEED100)
1880 phydev->speed = SPEED_100;
1881 else
1882 phydev->speed = SPEED_10;
1883 }
1884
1885 return 0;
1886}
1887EXPORT_SYMBOL(genphy_read_status);
1888
1889/**
1890 * genphy_soft_reset - software reset the PHY via BMCR_RESET bit
1891 * @phydev: target phy_device struct
1892 *
1893 * Description: Perform a software PHY reset using the standard
1894 * BMCR_RESET bit and poll for the reset bit to be cleared.
1895 *
1896 * Returns: 0 on success, < 0 on failure
1897 */
1898int genphy_soft_reset(struct phy_device *phydev)
1899{
1900 u16 res = BMCR_RESET;
1901 int ret;
1902
1903 if (phydev->autoneg == AUTONEG_ENABLE)
1904 res |= BMCR_ANRESTART;
1905
1906 ret = phy_modify(phydev, MII_BMCR, BMCR_ISOLATE, res);
1907 if (ret < 0)
1908 return ret;
1909
1910 ret = phy_poll_reset(phydev);
1911 if (ret)
1912 return ret;
1913
1914 /* BMCR may be reset to defaults */
1915 if (phydev->autoneg == AUTONEG_DISABLE)
1916 ret = genphy_setup_forced(phydev);
1917
1918 return ret;
1919}
1920EXPORT_SYMBOL(genphy_soft_reset);
1921
1922/**
1923 * genphy_read_abilities - read PHY abilities from Clause 22 registers
1924 * @phydev: target phy_device struct
1925 *
1926 * Description: Reads the PHY's abilities and populates
1927 * phydev->supported accordingly.
1928 *
1929 * Returns: 0 on success, < 0 on failure
1930 */
1931int genphy_read_abilities(struct phy_device *phydev)
1932{
1933 int val;
1934
1935 linkmode_set_bit_array(phy_basic_ports_array,
1936 ARRAY_SIZE(phy_basic_ports_array),
1937 phydev->supported);
1938
1939 val = phy_read(phydev, MII_BMSR);
1940 if (val < 0)
1941 return val;
1942
1943 linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported,
1944 val & BMSR_ANEGCAPABLE);
1945
1946 linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, phydev->supported,
1947 val & BMSR_100FULL);
1948 linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, phydev->supported,
1949 val & BMSR_100HALF);
1950 linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, phydev->supported,
1951 val & BMSR_10FULL);
1952 linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, phydev->supported,
1953 val & BMSR_10HALF);
1954
1955 if (val & BMSR_ESTATEN) {
1956 val = phy_read(phydev, MII_ESTATUS);
1957 if (val < 0)
1958 return val;
1959
1960 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
1961 phydev->supported, val & ESTATUS_1000_TFULL);
1962 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
1963 phydev->supported, val & ESTATUS_1000_THALF);
1964 linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
1965 phydev->supported, val & ESTATUS_1000_XFULL);
1966 }
1967
1968 return 0;
1969}
1970EXPORT_SYMBOL(genphy_read_abilities);
1971
1972/* This is used for the phy device which doesn't support the MMD extended
1973 * register access, but it does have side effect when we are trying to access
1974 * the MMD register via indirect method.
1975 */
1976int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, u16 regnum)
1977{
1978 return -EOPNOTSUPP;
1979}
1980EXPORT_SYMBOL(genphy_read_mmd_unsupported);
1981
1982int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum,
1983 u16 regnum, u16 val)
1984{
1985 return -EOPNOTSUPP;
1986}
1987EXPORT_SYMBOL(genphy_write_mmd_unsupported);
1988
1989int genphy_suspend(struct phy_device *phydev)
1990{
1991 return phy_set_bits(phydev, MII_BMCR, BMCR_PDOWN);
1992}
1993EXPORT_SYMBOL(genphy_suspend);
1994
1995int genphy_resume(struct phy_device *phydev)
1996{
1997 return phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN);
1998}
1999EXPORT_SYMBOL(genphy_resume);
2000
2001int genphy_loopback(struct phy_device *phydev, bool enable)
2002{
2003 return phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK,
2004 enable ? BMCR_LOOPBACK : 0);
2005}
2006EXPORT_SYMBOL(genphy_loopback);
2007
2008/**
2009 * phy_remove_link_mode - Remove a supported link mode
2010 * @phydev: phy_device structure to remove link mode from
2011 * @link_mode: Link mode to be removed
2012 *
2013 * Description: Some MACs don't support all link modes which the PHY
2014 * does. e.g. a 1G MAC often does not support 1000Half. Add a helper
2015 * to remove a link mode.
2016 */
2017void phy_remove_link_mode(struct phy_device *phydev, u32 link_mode)
2018{
2019 linkmode_clear_bit(link_mode, phydev->supported);
2020 phy_advertise_supported(phydev);
2021}
2022EXPORT_SYMBOL(phy_remove_link_mode);
2023
2024static void phy_copy_pause_bits(unsigned long *dst, unsigned long *src)
2025{
2026 linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, dst,
2027 linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, src));
2028 linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, dst,
2029 linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, src));
2030}
2031
2032/**
2033 * phy_advertise_supported - Advertise all supported modes
2034 * @phydev: target phy_device struct
2035 *
2036 * Description: Called to advertise all supported modes, doesn't touch
2037 * pause mode advertising.
2038 */
2039void phy_advertise_supported(struct phy_device *phydev)
2040{
2041 __ETHTOOL_DECLARE_LINK_MODE_MASK(new);
2042
2043 linkmode_copy(new, phydev->supported);
2044 phy_copy_pause_bits(new, phydev->advertising);
2045 linkmode_copy(phydev->advertising, new);
2046}
2047EXPORT_SYMBOL(phy_advertise_supported);
2048
2049/**
2050 * phy_support_sym_pause - Enable support of symmetrical pause
2051 * @phydev: target phy_device struct
2052 *
2053 * Description: Called by the MAC to indicate is supports symmetrical
2054 * Pause, but not asym pause.
2055 */
2056void phy_support_sym_pause(struct phy_device *phydev)
2057{
2058 linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported);
2059 phy_copy_pause_bits(phydev->advertising, phydev->supported);
2060}
2061EXPORT_SYMBOL(phy_support_sym_pause);
2062
2063/**
2064 * phy_support_asym_pause - Enable support of asym pause
2065 * @phydev: target phy_device struct
2066 *
2067 * Description: Called by the MAC to indicate is supports Asym Pause.
2068 */
2069void phy_support_asym_pause(struct phy_device *phydev)
2070{
2071 phy_copy_pause_bits(phydev->advertising, phydev->supported);
2072}
2073EXPORT_SYMBOL(phy_support_asym_pause);
2074
2075/**
2076 * phy_set_sym_pause - Configure symmetric Pause
2077 * @phydev: target phy_device struct
2078 * @rx: Receiver Pause is supported
2079 * @tx: Transmit Pause is supported
2080 * @autoneg: Auto neg should be used
2081 *
2082 * Description: Configure advertised Pause support depending on if
2083 * receiver pause and pause auto neg is supported. Generally called
2084 * from the set_pauseparam .ndo.
2085 */
2086void phy_set_sym_pause(struct phy_device *phydev, bool rx, bool tx,
2087 bool autoneg)
2088{
2089 linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported);
2090
2091 if (rx && tx && autoneg)
2092 linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
2093 phydev->supported);
2094
2095 linkmode_copy(phydev->advertising, phydev->supported);
2096}
2097EXPORT_SYMBOL(phy_set_sym_pause);
2098
2099/**
2100 * phy_set_asym_pause - Configure Pause and Asym Pause
2101 * @phydev: target phy_device struct
2102 * @rx: Receiver Pause is supported
2103 * @tx: Transmit Pause is supported
2104 *
2105 * Description: Configure advertised Pause support depending on if
2106 * transmit and receiver pause is supported. If there has been a
2107 * change in adverting, trigger a new autoneg. Generally called from
2108 * the set_pauseparam .ndo.
2109 */
2110void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx)
2111{
2112 __ETHTOOL_DECLARE_LINK_MODE_MASK(oldadv);
2113
2114 linkmode_copy(oldadv, phydev->advertising);
2115
2116 linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT,
2117 phydev->advertising);
2118 linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
2119 phydev->advertising);
2120
2121 if (rx) {
2122 linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
2123 phydev->advertising);
2124 linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
2125 phydev->advertising);
2126 }
2127
2128 if (tx)
2129 linkmode_change_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
2130 phydev->advertising);
2131
2132 if (!linkmode_equal(oldadv, phydev->advertising) &&
2133 phydev->autoneg)
2134 phy_start_aneg(phydev);
2135}
2136EXPORT_SYMBOL(phy_set_asym_pause);
2137
2138/**
2139 * phy_validate_pause - Test if the PHY/MAC support the pause configuration
2140 * @phydev: phy_device struct
2141 * @pp: requested pause configuration
2142 *
2143 * Description: Test if the PHY/MAC combination supports the Pause
2144 * configuration the user is requesting. Returns True if it is
2145 * supported, false otherwise.
2146 */
2147bool phy_validate_pause(struct phy_device *phydev,
2148 struct ethtool_pauseparam *pp)
2149{
2150 if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
2151 phydev->supported) && pp->rx_pause)
2152 return false;
2153
2154 if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
2155 phydev->supported) &&
2156 pp->rx_pause != pp->tx_pause)
2157 return false;
2158
2159 return true;
2160}
2161EXPORT_SYMBOL(phy_validate_pause);
2162
2163static bool phy_drv_supports_irq(struct phy_driver *phydrv)
2164{
2165 return phydrv->config_intr && phydrv->ack_interrupt;
2166}
2167
2168/**
2169 * phy_probe - probe and init a PHY device
2170 * @dev: device to probe and init
2171 *
2172 * Description: Take care of setting up the phy_device structure,
2173 * set the state to READY (the driver's init function should
2174 * set it to STARTING if needed).
2175 */
2176static int phy_probe(struct device *dev)
2177{
2178 struct phy_device *phydev = to_phy_device(dev);
2179 struct device_driver *drv = phydev->mdio.dev.driver;
2180 struct phy_driver *phydrv = to_phy_driver(drv);
2181 int err = 0;
2182
2183 phydev->drv = phydrv;
2184
2185 /* Disable the interrupt if the PHY doesn't support it
2186 * but the interrupt is still a valid one
2187 */
2188 if (!phy_drv_supports_irq(phydrv) && phy_interrupt_is_valid(phydev))
2189 phydev->irq = PHY_POLL;
2190
2191 if (phydrv->flags & PHY_IS_INTERNAL)
2192 phydev->is_internal = true;
2193
2194 mutex_lock(&phydev->lock);
2195
2196 if (phydev->drv->probe) {
2197 /* Deassert the reset signal */
2198 phy_device_reset(phydev, 0);
2199
2200 err = phydev->drv->probe(phydev);
2201 if (err) {
2202 /* Assert the reset signal */
2203 phy_device_reset(phydev, 1);
2204 goto out;
2205 }
2206 }
2207
2208 /* Start out supporting everything. Eventually,
2209 * a controller will attach, and may modify one
2210 * or both of these values
2211 */
2212 if (phydrv->features) {
2213 linkmode_copy(phydev->supported, phydrv->features);
2214 } else if (phydrv->get_features) {
2215 err = phydrv->get_features(phydev);
2216 } else if (phydev->is_c45) {
2217 err = genphy_c45_pma_read_abilities(phydev);
2218 } else {
2219 err = genphy_read_abilities(phydev);
2220 }
2221
2222 if (err)
2223 goto out;
2224
2225 if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
2226 phydev->supported))
2227 phydev->autoneg = 0;
2228
2229 if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
2230 phydev->supported))
2231 phydev->is_gigabit_capable = 1;
2232 if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
2233 phydev->supported))
2234 phydev->is_gigabit_capable = 1;
2235
2236 of_set_phy_supported(phydev);
2237 phy_advertise_supported(phydev);
2238
2239 /* Get the EEE modes we want to prohibit. We will ask
2240 * the PHY stop advertising these mode later on
2241 */
2242 of_set_phy_eee_broken(phydev);
2243
2244 /* The Pause Frame bits indicate that the PHY can support passing
2245 * pause frames. During autonegotiation, the PHYs will determine if
2246 * they should allow pause frames to pass. The MAC driver should then
2247 * use that result to determine whether to enable flow control via
2248 * pause frames.
2249 *
2250 * Normally, PHY drivers should not set the Pause bits, and instead
2251 * allow phylib to do that. However, there may be some situations
2252 * (e.g. hardware erratum) where the driver wants to set only one
2253 * of these bits.
2254 */
2255 if (!test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->supported) &&
2256 !test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->supported)) {
2257 linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
2258 phydev->supported);
2259 linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
2260 phydev->supported);
2261 }
2262
2263 /* Set the state to READY by default */
2264 phydev->state = PHY_READY;
2265
2266out:
2267 mutex_unlock(&phydev->lock);
2268
2269 return err;
2270}
2271
2272static int phy_remove(struct device *dev)
2273{
2274 struct phy_device *phydev = to_phy_device(dev);
2275
2276 cancel_delayed_work_sync(&phydev->state_queue);
2277
2278 mutex_lock(&phydev->lock);
2279 phydev->state = PHY_DOWN;
2280 mutex_unlock(&phydev->lock);
2281
2282 if (phydev->drv && phydev->drv->remove) {
2283 phydev->drv->remove(phydev);
2284
2285 /* Assert the reset signal */
2286 phy_device_reset(phydev, 1);
2287 }
2288 phydev->drv = NULL;
2289
2290 return 0;
2291}
2292
2293/**
2294 * phy_driver_register - register a phy_driver with the PHY layer
2295 * @new_driver: new phy_driver to register
2296 * @owner: module owning this PHY
2297 */
2298int phy_driver_register(struct phy_driver *new_driver, struct module *owner)
2299{
2300 int retval;
2301
2302 /* Either the features are hard coded, or dynamically
2303 * determined. It cannot be both.
2304 */
2305 if (WARN_ON(new_driver->features && new_driver->get_features)) {
2306 pr_err("%s: features and get_features must not both be set\n",
2307 new_driver->name);
2308 return -EINVAL;
2309 }
2310
2311 new_driver->mdiodrv.flags |= MDIO_DEVICE_IS_PHY;
2312 new_driver->mdiodrv.driver.name = new_driver->name;
2313 new_driver->mdiodrv.driver.bus = &mdio_bus_type;
2314 new_driver->mdiodrv.driver.probe = phy_probe;
2315 new_driver->mdiodrv.driver.remove = phy_remove;
2316 new_driver->mdiodrv.driver.owner = owner;
2317
2318 retval = driver_register(&new_driver->mdiodrv.driver);
2319 if (retval) {
2320 pr_err("%s: Error %d in registering driver\n",
2321 new_driver->name, retval);
2322
2323 return retval;
2324 }
2325
2326 pr_debug("%s: Registered new driver\n", new_driver->name);
2327
2328 return 0;
2329}
2330EXPORT_SYMBOL(phy_driver_register);
2331
2332int phy_drivers_register(struct phy_driver *new_driver, int n,
2333 struct module *owner)
2334{
2335 int i, ret = 0;
2336
2337 for (i = 0; i < n; i++) {
2338 ret = phy_driver_register(new_driver + i, owner);
2339 if (ret) {
2340 while (i-- > 0)
2341 phy_driver_unregister(new_driver + i);
2342 break;
2343 }
2344 }
2345 return ret;
2346}
2347EXPORT_SYMBOL(phy_drivers_register);
2348
2349void phy_driver_unregister(struct phy_driver *drv)
2350{
2351 driver_unregister(&drv->mdiodrv.driver);
2352}
2353EXPORT_SYMBOL(phy_driver_unregister);
2354
2355void phy_drivers_unregister(struct phy_driver *drv, int n)
2356{
2357 int i;
2358
2359 for (i = 0; i < n; i++)
2360 phy_driver_unregister(drv + i);
2361}
2362EXPORT_SYMBOL(phy_drivers_unregister);
2363
2364static struct phy_driver genphy_driver = {
2365 .phy_id = 0xffffffff,
2366 .phy_id_mask = 0xffffffff,
2367 .name = "Generic PHY",
2368 .soft_reset = genphy_no_soft_reset,
2369 .get_features = genphy_read_abilities,
2370 .aneg_done = genphy_aneg_done,
2371 .suspend = genphy_suspend,
2372 .resume = genphy_resume,
2373 .set_loopback = genphy_loopback,
2374};
2375
2376static int __init phy_init(void)
2377{
2378 int rc;
2379
2380 rc = mdio_bus_init();
2381 if (rc)
2382 return rc;
2383
2384 features_init();
2385
2386 rc = phy_driver_register(&genphy_c45_driver, THIS_MODULE);
2387 if (rc)
2388 goto err_c45;
2389
2390 rc = phy_driver_register(&genphy_driver, THIS_MODULE);
2391 if (rc) {
2392 phy_driver_unregister(&genphy_c45_driver);
2393err_c45:
2394 mdio_bus_exit();
2395 }
2396
2397 return rc;
2398}
2399
2400static void __exit phy_exit(void)
2401{
2402 phy_driver_unregister(&genphy_c45_driver);
2403 phy_driver_unregister(&genphy_driver);
2404 mdio_bus_exit();
2405}
2406
2407subsys_initcall(phy_init);
2408module_exit(phy_exit);