Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (c) 2010-2011, 2020-2021, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2014, Sony Mobile Communications Inc.
5 */
6
7#include <linux/delay.h>
8#include <linux/errno.h>
9#include <linux/input.h>
10#include <linux/interrupt.h>
11#include <linux/kernel.h>
12#include <linux/ktime.h>
13#include <linux/log2.h>
14#include <linux/module.h>
15#include <linux/of.h>
16#include <linux/of_address.h>
17#include <linux/platform_device.h>
18#include <linux/reboot.h>
19#include <linux/regmap.h>
20
21#define PON_REV2 0x01
22
23#define PON_SUBTYPE 0x05
24
25#define PON_SUBTYPE_PRIMARY 0x01
26#define PON_SUBTYPE_SECONDARY 0x02
27#define PON_SUBTYPE_1REG 0x03
28#define PON_SUBTYPE_GEN2_PRIMARY 0x04
29#define PON_SUBTYPE_GEN2_SECONDARY 0x05
30#define PON_SUBTYPE_GEN3_PBS 0x08
31#define PON_SUBTYPE_GEN3_HLOS 0x09
32
33#define PON_RT_STS 0x10
34#define PON_KPDPWR_N_SET BIT(0)
35#define PON_RESIN_N_SET BIT(1)
36#define PON_GEN3_RESIN_N_SET BIT(6)
37#define PON_GEN3_KPDPWR_N_SET BIT(7)
38
39#define PON_PS_HOLD_RST_CTL 0x5a
40#define PON_PS_HOLD_RST_CTL2 0x5b
41#define PON_PS_HOLD_ENABLE BIT(7)
42#define PON_PS_HOLD_TYPE_MASK 0x0f
43#define PON_PS_HOLD_TYPE_WARM_RESET 1
44#define PON_PS_HOLD_TYPE_SHUTDOWN 4
45#define PON_PS_HOLD_TYPE_HARD_RESET 7
46
47#define PON_PULL_CTL 0x70
48#define PON_KPDPWR_PULL_UP BIT(1)
49#define PON_RESIN_PULL_UP BIT(0)
50
51#define PON_DBC_CTL 0x71
52#define PON_DBC_DELAY_MASK_GEN1 0x7
53#define PON_DBC_DELAY_MASK_GEN2 0xf
54#define PON_DBC_SHIFT_GEN1 6
55#define PON_DBC_SHIFT_GEN2 14
56
57struct pm8941_data {
58 unsigned int pull_up_bit;
59 unsigned int status_bit;
60 bool supports_ps_hold_poff_config;
61 bool supports_debounce_config;
62 bool has_pon_pbs;
63 const char *name;
64 const char *phys;
65};
66
67struct pm8941_pwrkey {
68 struct device *dev;
69 int irq;
70 u32 baseaddr;
71 u32 pon_pbs_baseaddr;
72 struct regmap *regmap;
73 struct input_dev *input;
74
75 unsigned int revision;
76 unsigned int subtype;
77 struct notifier_block reboot_notifier;
78
79 u32 code;
80 u32 sw_debounce_time_us;
81 ktime_t sw_debounce_end_time;
82 bool last_status;
83 const struct pm8941_data *data;
84};
85
86static int pm8941_reboot_notify(struct notifier_block *nb,
87 unsigned long code, void *unused)
88{
89 struct pm8941_pwrkey *pwrkey = container_of(nb, struct pm8941_pwrkey,
90 reboot_notifier);
91 unsigned int enable_reg;
92 unsigned int reset_type;
93 int error;
94
95 /* PMICs with revision 0 have the enable bit in same register as ctrl */
96 if (pwrkey->revision == 0)
97 enable_reg = PON_PS_HOLD_RST_CTL;
98 else
99 enable_reg = PON_PS_HOLD_RST_CTL2;
100
101 error = regmap_update_bits(pwrkey->regmap,
102 pwrkey->baseaddr + enable_reg,
103 PON_PS_HOLD_ENABLE,
104 0);
105 if (error)
106 dev_err(pwrkey->dev,
107 "unable to clear ps hold reset enable: %d\n",
108 error);
109
110 /*
111 * Updates of PON_PS_HOLD_ENABLE requires 3 sleep cycles between
112 * writes.
113 */
114 usleep_range(100, 1000);
115
116 switch (code) {
117 case SYS_HALT:
118 case SYS_POWER_OFF:
119 reset_type = PON_PS_HOLD_TYPE_SHUTDOWN;
120 break;
121 case SYS_RESTART:
122 default:
123 if (reboot_mode == REBOOT_WARM)
124 reset_type = PON_PS_HOLD_TYPE_WARM_RESET;
125 else
126 reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
127 break;
128 }
129
130 error = regmap_update_bits(pwrkey->regmap,
131 pwrkey->baseaddr + PON_PS_HOLD_RST_CTL,
132 PON_PS_HOLD_TYPE_MASK,
133 reset_type);
134 if (error)
135 dev_err(pwrkey->dev, "unable to set ps hold reset type: %d\n",
136 error);
137
138 error = regmap_update_bits(pwrkey->regmap,
139 pwrkey->baseaddr + enable_reg,
140 PON_PS_HOLD_ENABLE,
141 PON_PS_HOLD_ENABLE);
142 if (error)
143 dev_err(pwrkey->dev, "unable to re-set enable: %d\n", error);
144
145 return NOTIFY_DONE;
146}
147
148static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
149{
150 struct pm8941_pwrkey *pwrkey = _data;
151 unsigned int sts;
152 int err;
153
154 if (pwrkey->sw_debounce_time_us) {
155 if (ktime_before(ktime_get(), pwrkey->sw_debounce_end_time)) {
156 dev_dbg(pwrkey->dev,
157 "ignoring key event received before debounce end %llu us\n",
158 pwrkey->sw_debounce_end_time);
159 return IRQ_HANDLED;
160 }
161 }
162
163 err = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_RT_STS, &sts);
164 if (err)
165 return IRQ_HANDLED;
166
167 sts &= pwrkey->data->status_bit;
168
169 if (pwrkey->sw_debounce_time_us && !sts)
170 pwrkey->sw_debounce_end_time = ktime_add_us(ktime_get(),
171 pwrkey->sw_debounce_time_us);
172
173 /*
174 * Simulate a press event in case a release event occurred without a
175 * corresponding press event.
176 */
177 if (!pwrkey->last_status && !sts) {
178 input_report_key(pwrkey->input, pwrkey->code, 1);
179 input_sync(pwrkey->input);
180 }
181 pwrkey->last_status = sts;
182
183 input_report_key(pwrkey->input, pwrkey->code, sts);
184 input_sync(pwrkey->input);
185
186 return IRQ_HANDLED;
187}
188
189static int pm8941_pwrkey_sw_debounce_init(struct pm8941_pwrkey *pwrkey)
190{
191 unsigned int val, addr, mask;
192 int error;
193
194 if (pwrkey->data->has_pon_pbs && !pwrkey->pon_pbs_baseaddr) {
195 dev_err(pwrkey->dev,
196 "PON_PBS address missing, can't read HW debounce time\n");
197 return 0;
198 }
199
200 if (pwrkey->pon_pbs_baseaddr)
201 addr = pwrkey->pon_pbs_baseaddr + PON_DBC_CTL;
202 else
203 addr = pwrkey->baseaddr + PON_DBC_CTL;
204 error = regmap_read(pwrkey->regmap, addr, &val);
205 if (error)
206 return error;
207
208 if (pwrkey->subtype >= PON_SUBTYPE_GEN2_PRIMARY)
209 mask = 0xf;
210 else
211 mask = 0x7;
212
213 pwrkey->sw_debounce_time_us =
214 2 * USEC_PER_SEC / (1 << (mask - (val & mask)));
215
216 dev_dbg(pwrkey->dev, "SW debounce time = %u us\n",
217 pwrkey->sw_debounce_time_us);
218
219 return 0;
220}
221
222static int pm8941_pwrkey_suspend(struct device *dev)
223{
224 struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
225
226 if (device_may_wakeup(dev))
227 enable_irq_wake(pwrkey->irq);
228
229 return 0;
230}
231
232static int pm8941_pwrkey_resume(struct device *dev)
233{
234 struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
235
236 if (device_may_wakeup(dev))
237 disable_irq_wake(pwrkey->irq);
238
239 return 0;
240}
241
242static DEFINE_SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops,
243 pm8941_pwrkey_suspend, pm8941_pwrkey_resume);
244
245static int pm8941_pwrkey_probe(struct platform_device *pdev)
246{
247 struct pm8941_pwrkey *pwrkey;
248 bool pull_up;
249 struct device *parent;
250 struct device_node *regmap_node;
251 const __be32 *addr;
252 u32 req_delay, mask, delay_shift;
253 int error;
254
255 if (of_property_read_u32(pdev->dev.of_node, "debounce", &req_delay))
256 req_delay = 15625;
257
258 if (req_delay > 2000000 || req_delay == 0) {
259 dev_err(&pdev->dev, "invalid debounce time: %u\n", req_delay);
260 return -EINVAL;
261 }
262
263 pull_up = of_property_read_bool(pdev->dev.of_node, "bias-pull-up");
264
265 pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL);
266 if (!pwrkey)
267 return -ENOMEM;
268
269 pwrkey->dev = &pdev->dev;
270 pwrkey->data = of_device_get_match_data(&pdev->dev);
271
272 parent = pdev->dev.parent;
273 regmap_node = pdev->dev.of_node;
274 pwrkey->regmap = dev_get_regmap(parent, NULL);
275 if (!pwrkey->regmap) {
276 regmap_node = parent->of_node;
277 /*
278 * We failed to get regmap for parent. Let's see if we are
279 * a child of pon node and read regmap and reg from its
280 * parent.
281 */
282 pwrkey->regmap = dev_get_regmap(parent->parent, NULL);
283 if (!pwrkey->regmap) {
284 dev_err(&pdev->dev, "failed to locate regmap\n");
285 return -ENODEV;
286 }
287 }
288
289 addr = of_get_address(regmap_node, 0, NULL, NULL);
290 if (!addr) {
291 dev_err(&pdev->dev, "reg property missing\n");
292 return -EINVAL;
293 }
294 pwrkey->baseaddr = be32_to_cpup(addr);
295
296 if (pwrkey->data->has_pon_pbs) {
297 /* PON_PBS base address is optional */
298 addr = of_get_address(regmap_node, 1, NULL, NULL);
299 if (addr)
300 pwrkey->pon_pbs_baseaddr = be32_to_cpup(addr);
301 }
302
303 pwrkey->irq = platform_get_irq(pdev, 0);
304 if (pwrkey->irq < 0)
305 return pwrkey->irq;
306
307 error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2,
308 &pwrkey->revision);
309 if (error) {
310 dev_err(&pdev->dev, "failed to read revision: %d\n", error);
311 return error;
312 }
313
314 error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_SUBTYPE,
315 &pwrkey->subtype);
316 if (error) {
317 dev_err(&pdev->dev, "failed to read subtype: %d\n", error);
318 return error;
319 }
320
321 error = of_property_read_u32(pdev->dev.of_node, "linux,code",
322 &pwrkey->code);
323 if (error) {
324 dev_dbg(&pdev->dev,
325 "no linux,code assuming power (%d)\n", error);
326 pwrkey->code = KEY_POWER;
327 }
328
329 pwrkey->input = devm_input_allocate_device(&pdev->dev);
330 if (!pwrkey->input) {
331 dev_dbg(&pdev->dev, "unable to allocate input device\n");
332 return -ENOMEM;
333 }
334
335 input_set_capability(pwrkey->input, EV_KEY, pwrkey->code);
336
337 pwrkey->input->name = pwrkey->data->name;
338 pwrkey->input->phys = pwrkey->data->phys;
339
340 if (pwrkey->data->supports_debounce_config) {
341 if (pwrkey->subtype >= PON_SUBTYPE_GEN2_PRIMARY) {
342 mask = PON_DBC_DELAY_MASK_GEN2;
343 delay_shift = PON_DBC_SHIFT_GEN2;
344 } else {
345 mask = PON_DBC_DELAY_MASK_GEN1;
346 delay_shift = PON_DBC_SHIFT_GEN1;
347 }
348
349 req_delay = (req_delay << delay_shift) / USEC_PER_SEC;
350 req_delay = ilog2(req_delay);
351
352 error = regmap_update_bits(pwrkey->regmap,
353 pwrkey->baseaddr + PON_DBC_CTL,
354 mask,
355 req_delay);
356 if (error) {
357 dev_err(&pdev->dev, "failed to set debounce: %d\n",
358 error);
359 return error;
360 }
361 }
362
363 error = pm8941_pwrkey_sw_debounce_init(pwrkey);
364 if (error)
365 return error;
366
367 if (pwrkey->data->pull_up_bit) {
368 error = regmap_update_bits(pwrkey->regmap,
369 pwrkey->baseaddr + PON_PULL_CTL,
370 pwrkey->data->pull_up_bit,
371 pull_up ? pwrkey->data->pull_up_bit :
372 0);
373 if (error) {
374 dev_err(&pdev->dev, "failed to set pull: %d\n", error);
375 return error;
376 }
377 }
378
379 error = devm_request_threaded_irq(&pdev->dev, pwrkey->irq,
380 NULL, pm8941_pwrkey_irq,
381 IRQF_ONESHOT,
382 pwrkey->data->name, pwrkey);
383 if (error) {
384 dev_err(&pdev->dev, "failed requesting IRQ: %d\n", error);
385 return error;
386 }
387
388 error = input_register_device(pwrkey->input);
389 if (error) {
390 dev_err(&pdev->dev, "failed to register input device: %d\n",
391 error);
392 return error;
393 }
394
395 if (pwrkey->data->supports_ps_hold_poff_config) {
396 pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify;
397 error = register_reboot_notifier(&pwrkey->reboot_notifier);
398 if (error) {
399 dev_err(&pdev->dev, "failed to register reboot notifier: %d\n",
400 error);
401 return error;
402 }
403 }
404
405 platform_set_drvdata(pdev, pwrkey);
406 device_init_wakeup(&pdev->dev, 1);
407
408 return 0;
409}
410
411static void pm8941_pwrkey_remove(struct platform_device *pdev)
412{
413 struct pm8941_pwrkey *pwrkey = platform_get_drvdata(pdev);
414
415 if (pwrkey->data->supports_ps_hold_poff_config)
416 unregister_reboot_notifier(&pwrkey->reboot_notifier);
417}
418
419static const struct pm8941_data pwrkey_data = {
420 .pull_up_bit = PON_KPDPWR_PULL_UP,
421 .status_bit = PON_KPDPWR_N_SET,
422 .name = "pm8941_pwrkey",
423 .phys = "pm8941_pwrkey/input0",
424 .supports_ps_hold_poff_config = true,
425 .supports_debounce_config = true,
426 .has_pon_pbs = false,
427};
428
429static const struct pm8941_data resin_data = {
430 .pull_up_bit = PON_RESIN_PULL_UP,
431 .status_bit = PON_RESIN_N_SET,
432 .name = "pm8941_resin",
433 .phys = "pm8941_resin/input0",
434 .supports_ps_hold_poff_config = true,
435 .supports_debounce_config = true,
436 .has_pon_pbs = false,
437};
438
439static const struct pm8941_data pon_gen3_pwrkey_data = {
440 .status_bit = PON_GEN3_KPDPWR_N_SET,
441 .name = "pmic_pwrkey",
442 .phys = "pmic_pwrkey/input0",
443 .supports_ps_hold_poff_config = false,
444 .supports_debounce_config = false,
445 .has_pon_pbs = true,
446};
447
448static const struct pm8941_data pon_gen3_resin_data = {
449 .status_bit = PON_GEN3_RESIN_N_SET,
450 .name = "pmic_resin",
451 .phys = "pmic_resin/input0",
452 .supports_ps_hold_poff_config = false,
453 .supports_debounce_config = false,
454 .has_pon_pbs = true,
455};
456
457static const struct of_device_id pm8941_pwr_key_id_table[] = {
458 { .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
459 { .compatible = "qcom,pm8941-resin", .data = &resin_data },
460 { .compatible = "qcom,pmk8350-pwrkey", .data = &pon_gen3_pwrkey_data },
461 { .compatible = "qcom,pmk8350-resin", .data = &pon_gen3_resin_data },
462 { }
463};
464MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
465
466static struct platform_driver pm8941_pwrkey_driver = {
467 .probe = pm8941_pwrkey_probe,
468 .remove_new = pm8941_pwrkey_remove,
469 .driver = {
470 .name = "pm8941-pwrkey",
471 .pm = pm_sleep_ptr(&pm8941_pwr_key_pm_ops),
472 .of_match_table = of_match_ptr(pm8941_pwr_key_id_table),
473 },
474};
475module_platform_driver(pm8941_pwrkey_driver);
476
477MODULE_DESCRIPTION("PM8941 Power Key driver");
478MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
4 * Copyright (c) 2014, Sony Mobile Communications Inc.
5 */
6
7#include <linux/delay.h>
8#include <linux/errno.h>
9#include <linux/input.h>
10#include <linux/interrupt.h>
11#include <linux/kernel.h>
12#include <linux/log2.h>
13#include <linux/module.h>
14#include <linux/of.h>
15#include <linux/of_device.h>
16#include <linux/platform_device.h>
17#include <linux/reboot.h>
18#include <linux/regmap.h>
19
20#define PON_REV2 0x01
21
22#define PON_RT_STS 0x10
23#define PON_KPDPWR_N_SET BIT(0)
24#define PON_RESIN_N_SET BIT(1)
25
26#define PON_PS_HOLD_RST_CTL 0x5a
27#define PON_PS_HOLD_RST_CTL2 0x5b
28#define PON_PS_HOLD_ENABLE BIT(7)
29#define PON_PS_HOLD_TYPE_MASK 0x0f
30#define PON_PS_HOLD_TYPE_SHUTDOWN 4
31#define PON_PS_HOLD_TYPE_HARD_RESET 7
32
33#define PON_PULL_CTL 0x70
34#define PON_KPDPWR_PULL_UP BIT(1)
35#define PON_RESIN_PULL_UP BIT(0)
36
37#define PON_DBC_CTL 0x71
38#define PON_DBC_DELAY_MASK 0x7
39
40struct pm8941_data {
41 unsigned int pull_up_bit;
42 unsigned int status_bit;
43};
44
45struct pm8941_pwrkey {
46 struct device *dev;
47 int irq;
48 u32 baseaddr;
49 struct regmap *regmap;
50 struct input_dev *input;
51
52 unsigned int revision;
53 struct notifier_block reboot_notifier;
54
55 u32 code;
56 const struct pm8941_data *data;
57};
58
59static int pm8941_reboot_notify(struct notifier_block *nb,
60 unsigned long code, void *unused)
61{
62 struct pm8941_pwrkey *pwrkey = container_of(nb, struct pm8941_pwrkey,
63 reboot_notifier);
64 unsigned int enable_reg;
65 unsigned int reset_type;
66 int error;
67
68 /* PMICs with revision 0 have the enable bit in same register as ctrl */
69 if (pwrkey->revision == 0)
70 enable_reg = PON_PS_HOLD_RST_CTL;
71 else
72 enable_reg = PON_PS_HOLD_RST_CTL2;
73
74 error = regmap_update_bits(pwrkey->regmap,
75 pwrkey->baseaddr + enable_reg,
76 PON_PS_HOLD_ENABLE,
77 0);
78 if (error)
79 dev_err(pwrkey->dev,
80 "unable to clear ps hold reset enable: %d\n",
81 error);
82
83 /*
84 * Updates of PON_PS_HOLD_ENABLE requires 3 sleep cycles between
85 * writes.
86 */
87 usleep_range(100, 1000);
88
89 switch (code) {
90 case SYS_HALT:
91 case SYS_POWER_OFF:
92 reset_type = PON_PS_HOLD_TYPE_SHUTDOWN;
93 break;
94 case SYS_RESTART:
95 default:
96 reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
97 break;
98 }
99
100 error = regmap_update_bits(pwrkey->regmap,
101 pwrkey->baseaddr + PON_PS_HOLD_RST_CTL,
102 PON_PS_HOLD_TYPE_MASK,
103 reset_type);
104 if (error)
105 dev_err(pwrkey->dev, "unable to set ps hold reset type: %d\n",
106 error);
107
108 error = regmap_update_bits(pwrkey->regmap,
109 pwrkey->baseaddr + enable_reg,
110 PON_PS_HOLD_ENABLE,
111 PON_PS_HOLD_ENABLE);
112 if (error)
113 dev_err(pwrkey->dev, "unable to re-set enable: %d\n", error);
114
115 return NOTIFY_DONE;
116}
117
118static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
119{
120 struct pm8941_pwrkey *pwrkey = _data;
121 unsigned int sts;
122 int error;
123
124 error = regmap_read(pwrkey->regmap,
125 pwrkey->baseaddr + PON_RT_STS, &sts);
126 if (error)
127 return IRQ_HANDLED;
128
129 input_report_key(pwrkey->input, pwrkey->code,
130 sts & pwrkey->data->status_bit);
131 input_sync(pwrkey->input);
132
133 return IRQ_HANDLED;
134}
135
136static int __maybe_unused pm8941_pwrkey_suspend(struct device *dev)
137{
138 struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
139
140 if (device_may_wakeup(dev))
141 enable_irq_wake(pwrkey->irq);
142
143 return 0;
144}
145
146static int __maybe_unused pm8941_pwrkey_resume(struct device *dev)
147{
148 struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
149
150 if (device_may_wakeup(dev))
151 disable_irq_wake(pwrkey->irq);
152
153 return 0;
154}
155
156static SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops,
157 pm8941_pwrkey_suspend, pm8941_pwrkey_resume);
158
159static int pm8941_pwrkey_probe(struct platform_device *pdev)
160{
161 struct pm8941_pwrkey *pwrkey;
162 bool pull_up;
163 struct device *parent;
164 u32 req_delay;
165 int error;
166
167 if (of_property_read_u32(pdev->dev.of_node, "debounce", &req_delay))
168 req_delay = 15625;
169
170 if (req_delay > 2000000 || req_delay == 0) {
171 dev_err(&pdev->dev, "invalid debounce time: %u\n", req_delay);
172 return -EINVAL;
173 }
174
175 pull_up = of_property_read_bool(pdev->dev.of_node, "bias-pull-up");
176
177 pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL);
178 if (!pwrkey)
179 return -ENOMEM;
180
181 pwrkey->dev = &pdev->dev;
182 pwrkey->data = of_device_get_match_data(&pdev->dev);
183
184 parent = pdev->dev.parent;
185 pwrkey->regmap = dev_get_regmap(parent, NULL);
186 if (!pwrkey->regmap) {
187 /*
188 * We failed to get regmap for parent. Let's see if we are
189 * a child of pon node and read regmap and reg from its
190 * parent.
191 */
192 pwrkey->regmap = dev_get_regmap(parent->parent, NULL);
193 if (!pwrkey->regmap) {
194 dev_err(&pdev->dev, "failed to locate regmap\n");
195 return -ENODEV;
196 }
197
198 error = of_property_read_u32(parent->of_node,
199 "reg", &pwrkey->baseaddr);
200 } else {
201 error = of_property_read_u32(pdev->dev.of_node, "reg",
202 &pwrkey->baseaddr);
203 }
204 if (error)
205 return error;
206
207 pwrkey->irq = platform_get_irq(pdev, 0);
208 if (pwrkey->irq < 0)
209 return pwrkey->irq;
210
211 error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2,
212 &pwrkey->revision);
213 if (error) {
214 dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
215 return error;
216 }
217
218 error = of_property_read_u32(pdev->dev.of_node, "linux,code",
219 &pwrkey->code);
220 if (error) {
221 dev_dbg(&pdev->dev,
222 "no linux,code assuming power (%d)\n", error);
223 pwrkey->code = KEY_POWER;
224 }
225
226 pwrkey->input = devm_input_allocate_device(&pdev->dev);
227 if (!pwrkey->input) {
228 dev_dbg(&pdev->dev, "unable to allocate input device\n");
229 return -ENOMEM;
230 }
231
232 input_set_capability(pwrkey->input, EV_KEY, pwrkey->code);
233
234 pwrkey->input->name = "pm8941_pwrkey";
235 pwrkey->input->phys = "pm8941_pwrkey/input0";
236
237 req_delay = (req_delay << 6) / USEC_PER_SEC;
238 req_delay = ilog2(req_delay);
239
240 error = regmap_update_bits(pwrkey->regmap,
241 pwrkey->baseaddr + PON_DBC_CTL,
242 PON_DBC_DELAY_MASK,
243 req_delay);
244 if (error) {
245 dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
246 return error;
247 }
248
249 error = regmap_update_bits(pwrkey->regmap,
250 pwrkey->baseaddr + PON_PULL_CTL,
251 pwrkey->data->pull_up_bit,
252 pull_up ? pwrkey->data->pull_up_bit : 0);
253 if (error) {
254 dev_err(&pdev->dev, "failed to set pull: %d\n", error);
255 return error;
256 }
257
258 error = devm_request_threaded_irq(&pdev->dev, pwrkey->irq,
259 NULL, pm8941_pwrkey_irq,
260 IRQF_ONESHOT,
261 "pm8941_pwrkey", pwrkey);
262 if (error) {
263 dev_err(&pdev->dev, "failed requesting IRQ: %d\n", error);
264 return error;
265 }
266
267 error = input_register_device(pwrkey->input);
268 if (error) {
269 dev_err(&pdev->dev, "failed to register input device: %d\n",
270 error);
271 return error;
272 }
273
274 pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify,
275 error = register_reboot_notifier(&pwrkey->reboot_notifier);
276 if (error) {
277 dev_err(&pdev->dev, "failed to register reboot notifier: %d\n",
278 error);
279 return error;
280 }
281
282 platform_set_drvdata(pdev, pwrkey);
283 device_init_wakeup(&pdev->dev, 1);
284
285 return 0;
286}
287
288static int pm8941_pwrkey_remove(struct platform_device *pdev)
289{
290 struct pm8941_pwrkey *pwrkey = platform_get_drvdata(pdev);
291
292 unregister_reboot_notifier(&pwrkey->reboot_notifier);
293
294 return 0;
295}
296
297static const struct pm8941_data pwrkey_data = {
298 .pull_up_bit = PON_KPDPWR_PULL_UP,
299 .status_bit = PON_KPDPWR_N_SET,
300};
301
302static const struct pm8941_data resin_data = {
303 .pull_up_bit = PON_RESIN_PULL_UP,
304 .status_bit = PON_RESIN_N_SET,
305};
306
307static const struct of_device_id pm8941_pwr_key_id_table[] = {
308 { .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
309 { .compatible = "qcom,pm8941-resin", .data = &resin_data },
310 { }
311};
312MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
313
314static struct platform_driver pm8941_pwrkey_driver = {
315 .probe = pm8941_pwrkey_probe,
316 .remove = pm8941_pwrkey_remove,
317 .driver = {
318 .name = "pm8941-pwrkey",
319 .pm = &pm8941_pwr_key_pm_ops,
320 .of_match_table = of_match_ptr(pm8941_pwr_key_id_table),
321 },
322};
323module_platform_driver(pm8941_pwrkey_driver);
324
325MODULE_DESCRIPTION("PM8941 Power Key driver");
326MODULE_LICENSE("GPL v2");