Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Nvidia GPU I2C controller Driver
4 *
5 * Copyright (C) 2018 NVIDIA Corporation. All rights reserved.
6 * Author: Ajay Gupta <ajayg@nvidia.com>
7 */
8#include <linux/delay.h>
9#include <linux/i2c.h>
10#include <linux/interrupt.h>
11#include <linux/iopoll.h>
12#include <linux/module.h>
13#include <linux/pci.h>
14#include <linux/platform_device.h>
15#include <linux/pm.h>
16#include <linux/pm_runtime.h>
17#include <linux/power_supply.h>
18
19#include <asm/unaligned.h>
20
21#include "i2c-ccgx-ucsi.h"
22
23/* I2C definitions */
24#define I2C_MST_CNTL 0x00
25#define I2C_MST_CNTL_GEN_START BIT(0)
26#define I2C_MST_CNTL_GEN_STOP BIT(1)
27#define I2C_MST_CNTL_CMD_READ (1 << 2)
28#define I2C_MST_CNTL_CMD_WRITE (2 << 2)
29#define I2C_MST_CNTL_BURST_SIZE_SHIFT 6
30#define I2C_MST_CNTL_GEN_NACK BIT(28)
31#define I2C_MST_CNTL_STATUS GENMASK(30, 29)
32#define I2C_MST_CNTL_STATUS_OKAY (0 << 29)
33#define I2C_MST_CNTL_STATUS_NO_ACK (1 << 29)
34#define I2C_MST_CNTL_STATUS_TIMEOUT (2 << 29)
35#define I2C_MST_CNTL_STATUS_BUS_BUSY (3 << 29)
36#define I2C_MST_CNTL_CYCLE_TRIGGER BIT(31)
37
38#define I2C_MST_ADDR 0x04
39
40#define I2C_MST_I2C0_TIMING 0x08
41#define I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ 0x10e
42#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT 16
43#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX 255
44#define I2C_MST_I2C0_TIMING_TIMEOUT_CHECK BIT(24)
45
46#define I2C_MST_DATA 0x0c
47
48#define I2C_MST_HYBRID_PADCTL 0x20
49#define I2C_MST_HYBRID_PADCTL_MODE_I2C BIT(0)
50#define I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV BIT(14)
51#define I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV BIT(15)
52
53struct gpu_i2c_dev {
54 struct device *dev;
55 void __iomem *regs;
56 struct i2c_adapter adapter;
57 struct i2c_board_info *gpu_ccgx_ucsi;
58 struct i2c_client *ccgx_client;
59};
60
61static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd)
62{
63 u32 val;
64
65 /* enable I2C */
66 val = readl(i2cd->regs + I2C_MST_HYBRID_PADCTL);
67 val |= I2C_MST_HYBRID_PADCTL_MODE_I2C |
68 I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV |
69 I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV;
70 writel(val, i2cd->regs + I2C_MST_HYBRID_PADCTL);
71
72 /* enable 100KHZ mode */
73 val = I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ;
74 val |= (I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX
75 << I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT);
76 val |= I2C_MST_I2C0_TIMING_TIMEOUT_CHECK;
77 writel(val, i2cd->regs + I2C_MST_I2C0_TIMING);
78}
79
80static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd)
81{
82 u32 val;
83 int ret;
84
85 ret = readl_poll_timeout(i2cd->regs + I2C_MST_CNTL, val,
86 !(val & I2C_MST_CNTL_CYCLE_TRIGGER) ||
87 (val & I2C_MST_CNTL_STATUS) != I2C_MST_CNTL_STATUS_BUS_BUSY,
88 500, 1000 * USEC_PER_MSEC);
89
90 if (ret) {
91 dev_err(i2cd->dev, "i2c timeout error %x\n", val);
92 return -ETIMEDOUT;
93 }
94
95 val = readl(i2cd->regs + I2C_MST_CNTL);
96 switch (val & I2C_MST_CNTL_STATUS) {
97 case I2C_MST_CNTL_STATUS_OKAY:
98 return 0;
99 case I2C_MST_CNTL_STATUS_NO_ACK:
100 return -ENXIO;
101 case I2C_MST_CNTL_STATUS_TIMEOUT:
102 return -ETIMEDOUT;
103 default:
104 return 0;
105 }
106}
107
108static int gpu_i2c_read(struct gpu_i2c_dev *i2cd, u8 *data, u16 len)
109{
110 int status;
111 u32 val;
112
113 val = I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_CMD_READ |
114 (len << I2C_MST_CNTL_BURST_SIZE_SHIFT) |
115 I2C_MST_CNTL_CYCLE_TRIGGER | I2C_MST_CNTL_GEN_NACK;
116 writel(val, i2cd->regs + I2C_MST_CNTL);
117
118 status = gpu_i2c_check_status(i2cd);
119 if (status < 0)
120 return status;
121
122 val = readl(i2cd->regs + I2C_MST_DATA);
123 switch (len) {
124 case 1:
125 data[0] = val;
126 break;
127 case 2:
128 put_unaligned_be16(val, data);
129 break;
130 case 3:
131 put_unaligned_be24(val, data);
132 break;
133 case 4:
134 put_unaligned_be32(val, data);
135 break;
136 default:
137 break;
138 }
139 return status;
140}
141
142static int gpu_i2c_start(struct gpu_i2c_dev *i2cd)
143{
144 writel(I2C_MST_CNTL_GEN_START, i2cd->regs + I2C_MST_CNTL);
145 return gpu_i2c_check_status(i2cd);
146}
147
148static int gpu_i2c_stop(struct gpu_i2c_dev *i2cd)
149{
150 writel(I2C_MST_CNTL_GEN_STOP, i2cd->regs + I2C_MST_CNTL);
151 return gpu_i2c_check_status(i2cd);
152}
153
154static int gpu_i2c_write(struct gpu_i2c_dev *i2cd, u8 data)
155{
156 u32 val;
157
158 writel(data, i2cd->regs + I2C_MST_DATA);
159
160 val = I2C_MST_CNTL_CMD_WRITE | (1 << I2C_MST_CNTL_BURST_SIZE_SHIFT);
161 writel(val, i2cd->regs + I2C_MST_CNTL);
162
163 return gpu_i2c_check_status(i2cd);
164}
165
166static int gpu_i2c_master_xfer(struct i2c_adapter *adap,
167 struct i2c_msg *msgs, int num)
168{
169 struct gpu_i2c_dev *i2cd = i2c_get_adapdata(adap);
170 int status, status2;
171 bool send_stop = true;
172 int i, j;
173
174 /*
175 * The controller supports maximum 4 byte read due to known
176 * limitation of sending STOP after every read.
177 */
178 pm_runtime_get_sync(i2cd->dev);
179 for (i = 0; i < num; i++) {
180 if (msgs[i].flags & I2C_M_RD) {
181 /* program client address before starting read */
182 writel(msgs[i].addr, i2cd->regs + I2C_MST_ADDR);
183 /* gpu_i2c_read has implicit start */
184 status = gpu_i2c_read(i2cd, msgs[i].buf, msgs[i].len);
185 if (status < 0)
186 goto exit;
187 } else {
188 u8 addr = i2c_8bit_addr_from_msg(msgs + i);
189
190 status = gpu_i2c_start(i2cd);
191 if (status < 0) {
192 if (i == 0)
193 send_stop = false;
194 goto exit;
195 }
196
197 status = gpu_i2c_write(i2cd, addr);
198 if (status < 0)
199 goto exit;
200
201 for (j = 0; j < msgs[i].len; j++) {
202 status = gpu_i2c_write(i2cd, msgs[i].buf[j]);
203 if (status < 0)
204 goto exit;
205 }
206 }
207 }
208 send_stop = false;
209 status = gpu_i2c_stop(i2cd);
210 if (status < 0)
211 goto exit;
212
213 status = i;
214exit:
215 if (send_stop) {
216 status2 = gpu_i2c_stop(i2cd);
217 if (status2 < 0)
218 dev_err(i2cd->dev, "i2c stop failed %d\n", status2);
219 }
220 pm_runtime_mark_last_busy(i2cd->dev);
221 pm_runtime_put_autosuspend(i2cd->dev);
222 return status;
223}
224
225static const struct i2c_adapter_quirks gpu_i2c_quirks = {
226 .max_read_len = 4,
227 .max_comb_2nd_msg_len = 4,
228 .flags = I2C_AQ_COMB_WRITE_THEN_READ,
229};
230
231static u32 gpu_i2c_functionality(struct i2c_adapter *adap)
232{
233 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
234}
235
236static const struct i2c_algorithm gpu_i2c_algorithm = {
237 .master_xfer = gpu_i2c_master_xfer,
238 .functionality = gpu_i2c_functionality,
239};
240
241/*
242 * This driver is for Nvidia GPU cards with USB Type-C interface.
243 * We want to identify the cards using vendor ID and class code only
244 * to avoid dependency of adding product id for any new card which
245 * requires this driver.
246 * Currently there is no class code defined for UCSI device over PCI
247 * so using UNKNOWN class for now and it will be updated when UCSI
248 * over PCI gets a class code.
249 * There is no other NVIDIA cards with UNKNOWN class code. Even if the
250 * driver gets loaded for an undesired card then eventually i2c_read()
251 * (initiated from UCSI i2c_client) will timeout or UCSI commands will
252 * timeout.
253 */
254#define PCI_CLASS_SERIAL_UNKNOWN 0x0c80
255static const struct pci_device_id gpu_i2c_ids[] = {
256 { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
257 PCI_CLASS_SERIAL_UNKNOWN << 8, 0xffffff00},
258 { }
259};
260MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
261
262static const struct property_entry ccgx_props[] = {
263 /* Use FW built for NVIDIA GPU only */
264 PROPERTY_ENTRY_STRING("firmware-name", "nvidia,gpu"),
265 /* USB-C doesn't power the system */
266 PROPERTY_ENTRY_U8("scope", POWER_SUPPLY_SCOPE_DEVICE),
267 { }
268};
269
270static const struct software_node ccgx_node = {
271 .properties = ccgx_props,
272};
273
274static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id)
275{
276 struct device *dev = &pdev->dev;
277 struct gpu_i2c_dev *i2cd;
278 int status;
279
280 i2cd = devm_kzalloc(dev, sizeof(*i2cd), GFP_KERNEL);
281 if (!i2cd)
282 return -ENOMEM;
283
284 i2cd->dev = dev;
285 dev_set_drvdata(dev, i2cd);
286
287 status = pcim_enable_device(pdev);
288 if (status < 0)
289 return dev_err_probe(dev, status, "pcim_enable_device failed\n");
290
291 pci_set_master(pdev);
292
293 i2cd->regs = pcim_iomap(pdev, 0, 0);
294 if (!i2cd->regs)
295 return dev_err_probe(dev, -ENOMEM, "pcim_iomap failed\n");
296
297 status = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
298 if (status < 0)
299 return dev_err_probe(dev, status, "pci_alloc_irq_vectors err\n");
300
301 gpu_enable_i2c_bus(i2cd);
302
303 i2c_set_adapdata(&i2cd->adapter, i2cd);
304 i2cd->adapter.owner = THIS_MODULE;
305 strscpy(i2cd->adapter.name, "NVIDIA GPU I2C adapter",
306 sizeof(i2cd->adapter.name));
307 i2cd->adapter.algo = &gpu_i2c_algorithm;
308 i2cd->adapter.quirks = &gpu_i2c_quirks;
309 i2cd->adapter.dev.parent = dev;
310 status = i2c_add_adapter(&i2cd->adapter);
311 if (status < 0)
312 goto free_irq_vectors;
313
314 i2cd->ccgx_client = i2c_new_ccgx_ucsi(&i2cd->adapter, pdev->irq, &ccgx_node);
315 if (IS_ERR(i2cd->ccgx_client)) {
316 status = dev_err_probe(dev, PTR_ERR(i2cd->ccgx_client), "register UCSI failed\n");
317 goto del_adapter;
318 }
319
320 pm_runtime_set_autosuspend_delay(dev, 3000);
321 pm_runtime_use_autosuspend(dev);
322 pm_runtime_put_autosuspend(dev);
323 pm_runtime_allow(dev);
324
325 return 0;
326
327del_adapter:
328 i2c_del_adapter(&i2cd->adapter);
329free_irq_vectors:
330 pci_free_irq_vectors(pdev);
331 return status;
332}
333
334static void gpu_i2c_remove(struct pci_dev *pdev)
335{
336 struct gpu_i2c_dev *i2cd = pci_get_drvdata(pdev);
337
338 pm_runtime_get_noresume(i2cd->dev);
339 i2c_del_adapter(&i2cd->adapter);
340 pci_free_irq_vectors(pdev);
341}
342
343#define gpu_i2c_suspend NULL
344
345static __maybe_unused int gpu_i2c_resume(struct device *dev)
346{
347 struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev);
348
349 gpu_enable_i2c_bus(i2cd);
350 /*
351 * Runtime resume ccgx client so that it can see for any
352 * connector change event. Old ccg firmware has known
353 * issue of not triggering interrupt when a device is
354 * connected to runtime resume the controller.
355 */
356 pm_request_resume(&i2cd->ccgx_client->dev);
357 return 0;
358}
359
360static UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, gpu_i2c_suspend, gpu_i2c_resume,
361 NULL);
362
363static struct pci_driver gpu_i2c_driver = {
364 .name = "nvidia-gpu",
365 .id_table = gpu_i2c_ids,
366 .probe = gpu_i2c_probe,
367 .remove = gpu_i2c_remove,
368 .driver = {
369 .pm = &gpu_i2c_driver_pm,
370 },
371};
372
373module_pci_driver(gpu_i2c_driver);
374
375MODULE_AUTHOR("Ajay Gupta <ajayg@nvidia.com>");
376MODULE_DESCRIPTION("Nvidia GPU I2C controller Driver");
377MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Nvidia GPU I2C controller Driver
4 *
5 * Copyright (C) 2018 NVIDIA Corporation. All rights reserved.
6 * Author: Ajay Gupta <ajayg@nvidia.com>
7 */
8#include <linux/delay.h>
9#include <linux/i2c.h>
10#include <linux/interrupt.h>
11#include <linux/module.h>
12#include <linux/pci.h>
13#include <linux/platform_device.h>
14#include <linux/pm.h>
15#include <linux/pm_runtime.h>
16
17#include <asm/unaligned.h>
18
19/* I2C definitions */
20#define I2C_MST_CNTL 0x00
21#define I2C_MST_CNTL_GEN_START BIT(0)
22#define I2C_MST_CNTL_GEN_STOP BIT(1)
23#define I2C_MST_CNTL_CMD_READ (1 << 2)
24#define I2C_MST_CNTL_CMD_WRITE (2 << 2)
25#define I2C_MST_CNTL_BURST_SIZE_SHIFT 6
26#define I2C_MST_CNTL_GEN_NACK BIT(28)
27#define I2C_MST_CNTL_STATUS GENMASK(30, 29)
28#define I2C_MST_CNTL_STATUS_OKAY (0 << 29)
29#define I2C_MST_CNTL_STATUS_NO_ACK (1 << 29)
30#define I2C_MST_CNTL_STATUS_TIMEOUT (2 << 29)
31#define I2C_MST_CNTL_STATUS_BUS_BUSY (3 << 29)
32#define I2C_MST_CNTL_CYCLE_TRIGGER BIT(31)
33
34#define I2C_MST_ADDR 0x04
35
36#define I2C_MST_I2C0_TIMING 0x08
37#define I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ 0x10e
38#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT 16
39#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX 255
40#define I2C_MST_I2C0_TIMING_TIMEOUT_CHECK BIT(24)
41
42#define I2C_MST_DATA 0x0c
43
44#define I2C_MST_HYBRID_PADCTL 0x20
45#define I2C_MST_HYBRID_PADCTL_MODE_I2C BIT(0)
46#define I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV BIT(14)
47#define I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV BIT(15)
48
49struct gpu_i2c_dev {
50 struct device *dev;
51 void __iomem *regs;
52 struct i2c_adapter adapter;
53 struct i2c_board_info *gpu_ccgx_ucsi;
54 struct i2c_client *ccgx_client;
55};
56
57static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd)
58{
59 u32 val;
60
61 /* enable I2C */
62 val = readl(i2cd->regs + I2C_MST_HYBRID_PADCTL);
63 val |= I2C_MST_HYBRID_PADCTL_MODE_I2C |
64 I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV |
65 I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV;
66 writel(val, i2cd->regs + I2C_MST_HYBRID_PADCTL);
67
68 /* enable 100KHZ mode */
69 val = I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ;
70 val |= (I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX
71 << I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT);
72 val |= I2C_MST_I2C0_TIMING_TIMEOUT_CHECK;
73 writel(val, i2cd->regs + I2C_MST_I2C0_TIMING);
74}
75
76static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd)
77{
78 unsigned long target = jiffies + msecs_to_jiffies(1000);
79 u32 val;
80
81 do {
82 val = readl(i2cd->regs + I2C_MST_CNTL);
83 if (!(val & I2C_MST_CNTL_CYCLE_TRIGGER))
84 break;
85 if ((val & I2C_MST_CNTL_STATUS) !=
86 I2C_MST_CNTL_STATUS_BUS_BUSY)
87 break;
88 usleep_range(500, 600);
89 } while (time_is_after_jiffies(target));
90
91 if (time_is_before_jiffies(target)) {
92 dev_err(i2cd->dev, "i2c timeout error %x\n", val);
93 return -ETIMEDOUT;
94 }
95
96 val = readl(i2cd->regs + I2C_MST_CNTL);
97 switch (val & I2C_MST_CNTL_STATUS) {
98 case I2C_MST_CNTL_STATUS_OKAY:
99 return 0;
100 case I2C_MST_CNTL_STATUS_NO_ACK:
101 return -ENXIO;
102 case I2C_MST_CNTL_STATUS_TIMEOUT:
103 return -ETIMEDOUT;
104 default:
105 return 0;
106 }
107}
108
109static int gpu_i2c_read(struct gpu_i2c_dev *i2cd, u8 *data, u16 len)
110{
111 int status;
112 u32 val;
113
114 val = I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_CMD_READ |
115 (len << I2C_MST_CNTL_BURST_SIZE_SHIFT) |
116 I2C_MST_CNTL_CYCLE_TRIGGER | I2C_MST_CNTL_GEN_NACK;
117 writel(val, i2cd->regs + I2C_MST_CNTL);
118
119 status = gpu_i2c_check_status(i2cd);
120 if (status < 0)
121 return status;
122
123 val = readl(i2cd->regs + I2C_MST_DATA);
124 switch (len) {
125 case 1:
126 data[0] = val;
127 break;
128 case 2:
129 put_unaligned_be16(val, data);
130 break;
131 case 3:
132 put_unaligned_be16(val >> 8, data);
133 data[2] = val;
134 break;
135 case 4:
136 put_unaligned_be32(val, data);
137 break;
138 default:
139 break;
140 }
141 return status;
142}
143
144static int gpu_i2c_start(struct gpu_i2c_dev *i2cd)
145{
146 writel(I2C_MST_CNTL_GEN_START, i2cd->regs + I2C_MST_CNTL);
147 return gpu_i2c_check_status(i2cd);
148}
149
150static int gpu_i2c_stop(struct gpu_i2c_dev *i2cd)
151{
152 writel(I2C_MST_CNTL_GEN_STOP, i2cd->regs + I2C_MST_CNTL);
153 return gpu_i2c_check_status(i2cd);
154}
155
156static int gpu_i2c_write(struct gpu_i2c_dev *i2cd, u8 data)
157{
158 u32 val;
159
160 writel(data, i2cd->regs + I2C_MST_DATA);
161
162 val = I2C_MST_CNTL_CMD_WRITE | (1 << I2C_MST_CNTL_BURST_SIZE_SHIFT);
163 writel(val, i2cd->regs + I2C_MST_CNTL);
164
165 return gpu_i2c_check_status(i2cd);
166}
167
168static int gpu_i2c_master_xfer(struct i2c_adapter *adap,
169 struct i2c_msg *msgs, int num)
170{
171 struct gpu_i2c_dev *i2cd = i2c_get_adapdata(adap);
172 int status, status2;
173 bool send_stop = true;
174 int i, j;
175
176 /*
177 * The controller supports maximum 4 byte read due to known
178 * limitation of sending STOP after every read.
179 */
180 pm_runtime_get_sync(i2cd->dev);
181 for (i = 0; i < num; i++) {
182 if (msgs[i].flags & I2C_M_RD) {
183 /* program client address before starting read */
184 writel(msgs[i].addr, i2cd->regs + I2C_MST_ADDR);
185 /* gpu_i2c_read has implicit start */
186 status = gpu_i2c_read(i2cd, msgs[i].buf, msgs[i].len);
187 if (status < 0)
188 goto exit;
189 } else {
190 u8 addr = i2c_8bit_addr_from_msg(msgs + i);
191
192 status = gpu_i2c_start(i2cd);
193 if (status < 0) {
194 if (i == 0)
195 send_stop = false;
196 goto exit;
197 }
198
199 status = gpu_i2c_write(i2cd, addr);
200 if (status < 0)
201 goto exit;
202
203 for (j = 0; j < msgs[i].len; j++) {
204 status = gpu_i2c_write(i2cd, msgs[i].buf[j]);
205 if (status < 0)
206 goto exit;
207 }
208 }
209 }
210 send_stop = false;
211 status = gpu_i2c_stop(i2cd);
212 if (status < 0)
213 goto exit;
214
215 status = i;
216exit:
217 if (send_stop) {
218 status2 = gpu_i2c_stop(i2cd);
219 if (status2 < 0)
220 dev_err(i2cd->dev, "i2c stop failed %d\n", status2);
221 }
222 pm_runtime_mark_last_busy(i2cd->dev);
223 pm_runtime_put_autosuspend(i2cd->dev);
224 return status;
225}
226
227static const struct i2c_adapter_quirks gpu_i2c_quirks = {
228 .max_read_len = 4,
229 .max_comb_2nd_msg_len = 4,
230 .flags = I2C_AQ_COMB_WRITE_THEN_READ,
231};
232
233static u32 gpu_i2c_functionality(struct i2c_adapter *adap)
234{
235 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
236}
237
238static const struct i2c_algorithm gpu_i2c_algorithm = {
239 .master_xfer = gpu_i2c_master_xfer,
240 .functionality = gpu_i2c_functionality,
241};
242
243/*
244 * This driver is for Nvidia GPU cards with USB Type-C interface.
245 * We want to identify the cards using vendor ID and class code only
246 * to avoid dependency of adding product id for any new card which
247 * requires this driver.
248 * Currently there is no class code defined for UCSI device over PCI
249 * so using UNKNOWN class for now and it will be updated when UCSI
250 * over PCI gets a class code.
251 * There is no other NVIDIA cards with UNKNOWN class code. Even if the
252 * driver gets loaded for an undesired card then eventually i2c_read()
253 * (initiated from UCSI i2c_client) will timeout or UCSI commands will
254 * timeout.
255 */
256#define PCI_CLASS_SERIAL_UNKNOWN 0x0c80
257static const struct pci_device_id gpu_i2c_ids[] = {
258 { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
259 PCI_CLASS_SERIAL_UNKNOWN << 8, 0xffffff00},
260 { }
261};
262MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
263
264static const struct property_entry ccgx_props[] = {
265 /* Use FW built for NVIDIA (nv) only */
266 PROPERTY_ENTRY_U16("ccgx,firmware-build", ('n' << 8) | 'v'),
267 { }
268};
269
270static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
271{
272 i2cd->gpu_ccgx_ucsi = devm_kzalloc(i2cd->dev,
273 sizeof(*i2cd->gpu_ccgx_ucsi),
274 GFP_KERNEL);
275 if (!i2cd->gpu_ccgx_ucsi)
276 return -ENOMEM;
277
278 strlcpy(i2cd->gpu_ccgx_ucsi->type, "ccgx-ucsi",
279 sizeof(i2cd->gpu_ccgx_ucsi->type));
280 i2cd->gpu_ccgx_ucsi->addr = 0x8;
281 i2cd->gpu_ccgx_ucsi->irq = irq;
282 i2cd->gpu_ccgx_ucsi->properties = ccgx_props;
283 i2cd->ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
284 if (!i2cd->ccgx_client)
285 return -ENODEV;
286
287 return 0;
288}
289
290static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id)
291{
292 struct gpu_i2c_dev *i2cd;
293 int status;
294
295 i2cd = devm_kzalloc(&pdev->dev, sizeof(*i2cd), GFP_KERNEL);
296 if (!i2cd)
297 return -ENOMEM;
298
299 i2cd->dev = &pdev->dev;
300 dev_set_drvdata(&pdev->dev, i2cd);
301
302 status = pcim_enable_device(pdev);
303 if (status < 0) {
304 dev_err(&pdev->dev, "pcim_enable_device failed %d\n", status);
305 return status;
306 }
307
308 pci_set_master(pdev);
309
310 i2cd->regs = pcim_iomap(pdev, 0, 0);
311 if (!i2cd->regs) {
312 dev_err(&pdev->dev, "pcim_iomap failed\n");
313 return -ENOMEM;
314 }
315
316 status = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
317 if (status < 0) {
318 dev_err(&pdev->dev, "pci_alloc_irq_vectors err %d\n", status);
319 return status;
320 }
321
322 gpu_enable_i2c_bus(i2cd);
323
324 i2c_set_adapdata(&i2cd->adapter, i2cd);
325 i2cd->adapter.owner = THIS_MODULE;
326 strlcpy(i2cd->adapter.name, "NVIDIA GPU I2C adapter",
327 sizeof(i2cd->adapter.name));
328 i2cd->adapter.algo = &gpu_i2c_algorithm;
329 i2cd->adapter.quirks = &gpu_i2c_quirks;
330 i2cd->adapter.dev.parent = &pdev->dev;
331 status = i2c_add_adapter(&i2cd->adapter);
332 if (status < 0)
333 goto free_irq_vectors;
334
335 status = gpu_populate_client(i2cd, pdev->irq);
336 if (status < 0) {
337 dev_err(&pdev->dev, "gpu_populate_client failed %d\n", status);
338 goto del_adapter;
339 }
340
341 pm_runtime_set_autosuspend_delay(&pdev->dev, 3000);
342 pm_runtime_use_autosuspend(&pdev->dev);
343 pm_runtime_put_autosuspend(&pdev->dev);
344 pm_runtime_allow(&pdev->dev);
345
346 return 0;
347
348del_adapter:
349 i2c_del_adapter(&i2cd->adapter);
350free_irq_vectors:
351 pci_free_irq_vectors(pdev);
352 return status;
353}
354
355static void gpu_i2c_remove(struct pci_dev *pdev)
356{
357 struct gpu_i2c_dev *i2cd = dev_get_drvdata(&pdev->dev);
358
359 pm_runtime_get_noresume(i2cd->dev);
360 i2c_del_adapter(&i2cd->adapter);
361 pci_free_irq_vectors(pdev);
362}
363
364/*
365 * We need gpu_i2c_suspend() even if it is stub, for runtime pm to work
366 * correctly. Without it, lspci shows runtime pm status as "D0" for the card.
367 * Documentation/power/pci.rst also insists for driver to provide this.
368 */
369static __maybe_unused int gpu_i2c_suspend(struct device *dev)
370{
371 return 0;
372}
373
374static __maybe_unused int gpu_i2c_resume(struct device *dev)
375{
376 struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev);
377
378 gpu_enable_i2c_bus(i2cd);
379 /*
380 * Runtime resume ccgx client so that it can see for any
381 * connector change event. Old ccg firmware has known
382 * issue of not triggering interrupt when a device is
383 * connected to runtime resume the controller.
384 */
385 pm_request_resume(&i2cd->ccgx_client->dev);
386 return 0;
387}
388
389static UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, gpu_i2c_suspend, gpu_i2c_resume,
390 NULL);
391
392static struct pci_driver gpu_i2c_driver = {
393 .name = "nvidia-gpu",
394 .id_table = gpu_i2c_ids,
395 .probe = gpu_i2c_probe,
396 .remove = gpu_i2c_remove,
397 .driver = {
398 .pm = &gpu_i2c_driver_pm,
399 },
400};
401
402module_pci_driver(gpu_i2c_driver);
403
404MODULE_AUTHOR("Ajay Gupta <ajayg@nvidia.com>");
405MODULE_DESCRIPTION("Nvidia GPU I2C controller Driver");
406MODULE_LICENSE("GPL v2");