Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * GPIO driver for the Diamond Systems GPIO-MM
4 * Copyright (C) 2016 William Breathitt Gray
5 *
6 * This driver supports the following Diamond Systems devices: GPIO-MM and
7 * GPIO-MM-12.
8 */
9#include <linux/device.h>
10#include <linux/errno.h>
11#include <linux/ioport.h>
12#include <linux/isa.h>
13#include <linux/kernel.h>
14#include <linux/module.h>
15#include <linux/moduleparam.h>
16#include <linux/regmap.h>
17#include <linux/types.h>
18
19#include "gpio-i8255.h"
20
21MODULE_IMPORT_NS(I8255);
22
23#define GPIOMM_EXTENT 8
24#define MAX_NUM_GPIOMM max_num_isa_dev(GPIOMM_EXTENT)
25
26static unsigned int base[MAX_NUM_GPIOMM];
27static unsigned int num_gpiomm;
28module_param_hw_array(base, uint, ioport, &num_gpiomm, 0);
29MODULE_PARM_DESC(base, "Diamond Systems GPIO-MM base addresses");
30
31#define GPIOMM_NUM_PPI 2
32
33static const struct regmap_range gpiomm_volatile_ranges[] = {
34 i8255_volatile_regmap_range(0x0), i8255_volatile_regmap_range(0x4),
35};
36static const struct regmap_access_table gpiomm_volatile_table = {
37 .yes_ranges = gpiomm_volatile_ranges,
38 .n_yes_ranges = ARRAY_SIZE(gpiomm_volatile_ranges),
39};
40static const struct regmap_config gpiomm_regmap_config = {
41 .reg_bits = 8,
42 .reg_stride = 1,
43 .val_bits = 8,
44 .io_port = true,
45 .max_register = 0x7,
46 .volatile_table = &gpiomm_volatile_table,
47 .cache_type = REGCACHE_FLAT,
48};
49
50#define GPIOMM_NGPIO 48
51static const char *gpiomm_names[GPIOMM_NGPIO] = {
52 "Port 1A0", "Port 1A1", "Port 1A2", "Port 1A3", "Port 1A4", "Port 1A5",
53 "Port 1A6", "Port 1A7", "Port 1B0", "Port 1B1", "Port 1B2", "Port 1B3",
54 "Port 1B4", "Port 1B5", "Port 1B6", "Port 1B7", "Port 1C0", "Port 1C1",
55 "Port 1C2", "Port 1C3", "Port 1C4", "Port 1C5", "Port 1C6", "Port 1C7",
56 "Port 2A0", "Port 2A1", "Port 2A2", "Port 2A3", "Port 2A4", "Port 2A5",
57 "Port 2A6", "Port 2A7", "Port 2B0", "Port 2B1", "Port 2B2", "Port 2B3",
58 "Port 2B4", "Port 2B5", "Port 2B6", "Port 2B7", "Port 2C0", "Port 2C1",
59 "Port 2C2", "Port 2C3", "Port 2C4", "Port 2C5", "Port 2C6", "Port 2C7",
60};
61
62static int gpiomm_probe(struct device *dev, unsigned int id)
63{
64 const char *const name = dev_name(dev);
65 struct i8255_regmap_config config = {};
66 void __iomem *regs;
67
68 if (!devm_request_region(dev, base[id], GPIOMM_EXTENT, name)) {
69 dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
70 base[id], base[id] + GPIOMM_EXTENT);
71 return -EBUSY;
72 }
73
74 regs = devm_ioport_map(dev, base[id], GPIOMM_EXTENT);
75 if (!regs)
76 return -ENOMEM;
77
78 config.map = devm_regmap_init_mmio(dev, regs, &gpiomm_regmap_config);
79 if (IS_ERR(config.map))
80 return dev_err_probe(dev, PTR_ERR(config.map),
81 "Unable to initialize register map\n");
82
83 config.parent = dev;
84 config.num_ppi = GPIOMM_NUM_PPI;
85 config.names = gpiomm_names;
86
87 return devm_i8255_regmap_register(dev, &config);
88}
89
90static struct isa_driver gpiomm_driver = {
91 .probe = gpiomm_probe,
92 .driver = {
93 .name = "gpio-mm"
94 },
95};
96
97module_isa_driver(gpiomm_driver, num_gpiomm);
98
99MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
100MODULE_DESCRIPTION("Diamond Systems GPIO-MM GPIO driver");
101MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * GPIO driver for the Diamond Systems GPIO-MM
4 * Copyright (C) 2016 William Breathitt Gray
5 *
6 * This driver supports the following Diamond Systems devices: GPIO-MM and
7 * GPIO-MM-12.
8 */
9#include <linux/bitmap.h>
10#include <linux/bitops.h>
11#include <linux/device.h>
12#include <linux/errno.h>
13#include <linux/gpio/driver.h>
14#include <linux/io.h>
15#include <linux/ioport.h>
16#include <linux/isa.h>
17#include <linux/kernel.h>
18#include <linux/module.h>
19#include <linux/moduleparam.h>
20#include <linux/spinlock.h>
21
22#define GPIOMM_EXTENT 8
23#define MAX_NUM_GPIOMM max_num_isa_dev(GPIOMM_EXTENT)
24
25static unsigned int base[MAX_NUM_GPIOMM];
26static unsigned int num_gpiomm;
27module_param_hw_array(base, uint, ioport, &num_gpiomm, 0);
28MODULE_PARM_DESC(base, "Diamond Systems GPIO-MM base addresses");
29
30/**
31 * struct gpiomm_gpio - GPIO device private data structure
32 * @chip: instance of the gpio_chip
33 * @io_state: bit I/O state (whether bit is set to input or output)
34 * @out_state: output bits state
35 * @control: Control registers state
36 * @lock: synchronization lock to prevent I/O race conditions
37 * @base: base port address of the GPIO device
38 */
39struct gpiomm_gpio {
40 struct gpio_chip chip;
41 unsigned char io_state[6];
42 unsigned char out_state[6];
43 unsigned char control[2];
44 spinlock_t lock;
45 unsigned int base;
46};
47
48static int gpiomm_gpio_get_direction(struct gpio_chip *chip,
49 unsigned int offset)
50{
51 struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
52 const unsigned int port = offset / 8;
53 const unsigned int mask = BIT(offset % 8);
54
55 return !!(gpiommgpio->io_state[port] & mask);
56}
57
58static int gpiomm_gpio_direction_input(struct gpio_chip *chip,
59 unsigned int offset)
60{
61 struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
62 const unsigned int io_port = offset / 8;
63 const unsigned int control_port = io_port / 3;
64 const unsigned int control_addr = gpiommgpio->base + 3 + control_port*4;
65 unsigned long flags;
66 unsigned int control;
67
68 spin_lock_irqsave(&gpiommgpio->lock, flags);
69
70 /* Check if configuring Port C */
71 if (io_port == 2 || io_port == 5) {
72 /* Port C can be configured by nibble */
73 if (offset % 8 > 3) {
74 gpiommgpio->io_state[io_port] |= 0xF0;
75 gpiommgpio->control[control_port] |= BIT(3);
76 } else {
77 gpiommgpio->io_state[io_port] |= 0x0F;
78 gpiommgpio->control[control_port] |= BIT(0);
79 }
80 } else {
81 gpiommgpio->io_state[io_port] |= 0xFF;
82 if (io_port == 0 || io_port == 3)
83 gpiommgpio->control[control_port] |= BIT(4);
84 else
85 gpiommgpio->control[control_port] |= BIT(1);
86 }
87
88 control = BIT(7) | gpiommgpio->control[control_port];
89 outb(control, control_addr);
90
91 spin_unlock_irqrestore(&gpiommgpio->lock, flags);
92
93 return 0;
94}
95
96static int gpiomm_gpio_direction_output(struct gpio_chip *chip,
97 unsigned int offset, int value)
98{
99 struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
100 const unsigned int io_port = offset / 8;
101 const unsigned int control_port = io_port / 3;
102 const unsigned int mask = BIT(offset % 8);
103 const unsigned int control_addr = gpiommgpio->base + 3 + control_port*4;
104 const unsigned int out_port = (io_port > 2) ? io_port + 1 : io_port;
105 unsigned long flags;
106 unsigned int control;
107
108 spin_lock_irqsave(&gpiommgpio->lock, flags);
109
110 /* Check if configuring Port C */
111 if (io_port == 2 || io_port == 5) {
112 /* Port C can be configured by nibble */
113 if (offset % 8 > 3) {
114 gpiommgpio->io_state[io_port] &= 0x0F;
115 gpiommgpio->control[control_port] &= ~BIT(3);
116 } else {
117 gpiommgpio->io_state[io_port] &= 0xF0;
118 gpiommgpio->control[control_port] &= ~BIT(0);
119 }
120 } else {
121 gpiommgpio->io_state[io_port] &= 0x00;
122 if (io_port == 0 || io_port == 3)
123 gpiommgpio->control[control_port] &= ~BIT(4);
124 else
125 gpiommgpio->control[control_port] &= ~BIT(1);
126 }
127
128 if (value)
129 gpiommgpio->out_state[io_port] |= mask;
130 else
131 gpiommgpio->out_state[io_port] &= ~mask;
132
133 control = BIT(7) | gpiommgpio->control[control_port];
134 outb(control, control_addr);
135
136 outb(gpiommgpio->out_state[io_port], gpiommgpio->base + out_port);
137
138 spin_unlock_irqrestore(&gpiommgpio->lock, flags);
139
140 return 0;
141}
142
143static int gpiomm_gpio_get(struct gpio_chip *chip, unsigned int offset)
144{
145 struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
146 const unsigned int port = offset / 8;
147 const unsigned int mask = BIT(offset % 8);
148 const unsigned int in_port = (port > 2) ? port + 1 : port;
149 unsigned long flags;
150 unsigned int port_state;
151
152 spin_lock_irqsave(&gpiommgpio->lock, flags);
153
154 /* ensure that GPIO is set for input */
155 if (!(gpiommgpio->io_state[port] & mask)) {
156 spin_unlock_irqrestore(&gpiommgpio->lock, flags);
157 return -EINVAL;
158 }
159
160 port_state = inb(gpiommgpio->base + in_port);
161
162 spin_unlock_irqrestore(&gpiommgpio->lock, flags);
163
164 return !!(port_state & mask);
165}
166
167static int gpiomm_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
168 unsigned long *bits)
169{
170 struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
171 size_t i;
172 static const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
173 const unsigned int gpio_reg_size = 8;
174 unsigned int bits_offset;
175 size_t word_index;
176 unsigned int word_offset;
177 unsigned long word_mask;
178 const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
179 unsigned long port_state;
180
181 /* clear bits array to a clean slate */
182 bitmap_zero(bits, chip->ngpio);
183
184 /* get bits are evaluated a gpio port register at a time */
185 for (i = 0; i < ARRAY_SIZE(ports); i++) {
186 /* gpio offset in bits array */
187 bits_offset = i * gpio_reg_size;
188
189 /* word index for bits array */
190 word_index = BIT_WORD(bits_offset);
191
192 /* gpio offset within current word of bits array */
193 word_offset = bits_offset % BITS_PER_LONG;
194
195 /* mask of get bits for current gpio within current word */
196 word_mask = mask[word_index] & (port_mask << word_offset);
197 if (!word_mask) {
198 /* no get bits in this port so skip to next one */
199 continue;
200 }
201
202 /* read bits from current gpio port */
203 port_state = inb(gpiommgpio->base + ports[i]);
204
205 /* store acquired bits at respective bits array offset */
206 bits[word_index] |= (port_state << word_offset) & word_mask;
207 }
208
209 return 0;
210}
211
212static void gpiomm_gpio_set(struct gpio_chip *chip, unsigned int offset,
213 int value)
214{
215 struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
216 const unsigned int port = offset / 8;
217 const unsigned int mask = BIT(offset % 8);
218 const unsigned int out_port = (port > 2) ? port + 1 : port;
219 unsigned long flags;
220
221 spin_lock_irqsave(&gpiommgpio->lock, flags);
222
223 if (value)
224 gpiommgpio->out_state[port] |= mask;
225 else
226 gpiommgpio->out_state[port] &= ~mask;
227
228 outb(gpiommgpio->out_state[port], gpiommgpio->base + out_port);
229
230 spin_unlock_irqrestore(&gpiommgpio->lock, flags);
231}
232
233static void gpiomm_gpio_set_multiple(struct gpio_chip *chip,
234 unsigned long *mask, unsigned long *bits)
235{
236 struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
237 unsigned int i;
238 const unsigned int gpio_reg_size = 8;
239 unsigned int port;
240 unsigned int out_port;
241 unsigned int bitmask;
242 unsigned long flags;
243
244 /* set bits are evaluated a gpio register size at a time */
245 for (i = 0; i < chip->ngpio; i += gpio_reg_size) {
246 /* no more set bits in this mask word; skip to the next word */
247 if (!mask[BIT_WORD(i)]) {
248 i = (BIT_WORD(i) + 1) * BITS_PER_LONG - gpio_reg_size;
249 continue;
250 }
251
252 port = i / gpio_reg_size;
253 out_port = (port > 2) ? port + 1 : port;
254 bitmask = mask[BIT_WORD(i)] & bits[BIT_WORD(i)];
255
256 spin_lock_irqsave(&gpiommgpio->lock, flags);
257
258 /* update output state data and set device gpio register */
259 gpiommgpio->out_state[port] &= ~mask[BIT_WORD(i)];
260 gpiommgpio->out_state[port] |= bitmask;
261 outb(gpiommgpio->out_state[port], gpiommgpio->base + out_port);
262
263 spin_unlock_irqrestore(&gpiommgpio->lock, flags);
264
265 /* prepare for next gpio register set */
266 mask[BIT_WORD(i)] >>= gpio_reg_size;
267 bits[BIT_WORD(i)] >>= gpio_reg_size;
268 }
269}
270
271#define GPIOMM_NGPIO 48
272static const char *gpiomm_names[GPIOMM_NGPIO] = {
273 "Port 1A0", "Port 1A1", "Port 1A2", "Port 1A3", "Port 1A4", "Port 1A5",
274 "Port 1A6", "Port 1A7", "Port 1B0", "Port 1B1", "Port 1B2", "Port 1B3",
275 "Port 1B4", "Port 1B5", "Port 1B6", "Port 1B7", "Port 1C0", "Port 1C1",
276 "Port 1C2", "Port 1C3", "Port 1C4", "Port 1C5", "Port 1C6", "Port 1C7",
277 "Port 2A0", "Port 2A1", "Port 2A2", "Port 2A3", "Port 2A4", "Port 2A5",
278 "Port 2A6", "Port 2A7", "Port 2B0", "Port 2B1", "Port 2B2", "Port 2B3",
279 "Port 2B4", "Port 2B5", "Port 2B6", "Port 2B7", "Port 2C0", "Port 2C1",
280 "Port 2C2", "Port 2C3", "Port 2C4", "Port 2C5", "Port 2C6", "Port 2C7",
281};
282
283static int gpiomm_probe(struct device *dev, unsigned int id)
284{
285 struct gpiomm_gpio *gpiommgpio;
286 const char *const name = dev_name(dev);
287 int err;
288
289 gpiommgpio = devm_kzalloc(dev, sizeof(*gpiommgpio), GFP_KERNEL);
290 if (!gpiommgpio)
291 return -ENOMEM;
292
293 if (!devm_request_region(dev, base[id], GPIOMM_EXTENT, name)) {
294 dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
295 base[id], base[id] + GPIOMM_EXTENT);
296 return -EBUSY;
297 }
298
299 gpiommgpio->chip.label = name;
300 gpiommgpio->chip.parent = dev;
301 gpiommgpio->chip.owner = THIS_MODULE;
302 gpiommgpio->chip.base = -1;
303 gpiommgpio->chip.ngpio = GPIOMM_NGPIO;
304 gpiommgpio->chip.names = gpiomm_names;
305 gpiommgpio->chip.get_direction = gpiomm_gpio_get_direction;
306 gpiommgpio->chip.direction_input = gpiomm_gpio_direction_input;
307 gpiommgpio->chip.direction_output = gpiomm_gpio_direction_output;
308 gpiommgpio->chip.get = gpiomm_gpio_get;
309 gpiommgpio->chip.get_multiple = gpiomm_gpio_get_multiple;
310 gpiommgpio->chip.set = gpiomm_gpio_set;
311 gpiommgpio->chip.set_multiple = gpiomm_gpio_set_multiple;
312 gpiommgpio->base = base[id];
313
314 spin_lock_init(&gpiommgpio->lock);
315
316 err = devm_gpiochip_add_data(dev, &gpiommgpio->chip, gpiommgpio);
317 if (err) {
318 dev_err(dev, "GPIO registering failed (%d)\n", err);
319 return err;
320 }
321
322 /* initialize all GPIO as output */
323 outb(0x80, base[id] + 3);
324 outb(0x00, base[id]);
325 outb(0x00, base[id] + 1);
326 outb(0x00, base[id] + 2);
327 outb(0x80, base[id] + 7);
328 outb(0x00, base[id] + 4);
329 outb(0x00, base[id] + 5);
330 outb(0x00, base[id] + 6);
331
332 return 0;
333}
334
335static struct isa_driver gpiomm_driver = {
336 .probe = gpiomm_probe,
337 .driver = {
338 .name = "gpio-mm"
339 },
340};
341
342module_isa_driver(gpiomm_driver, num_gpiomm);
343
344MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
345MODULE_DESCRIPTION("Diamond Systems GPIO-MM GPIO driver");
346MODULE_LICENSE("GPL v2");