Linux Audio

Check our new training course

Loading...
v6.8
   1/*
   2   BlueZ - Bluetooth protocol stack for Linux
   3   Copyright (c) 2000-2001, 2010, Code Aurora Forum. All rights reserved.
   4   Copyright 2023 NXP
   5
   6   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
   7
   8   This program is free software; you can redistribute it and/or modify
   9   it under the terms of the GNU General Public License version 2 as
  10   published by the Free Software Foundation;
  11
  12   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
  13   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  14   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
  15   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
  16   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
  17   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  18   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  19   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  20
  21   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
  22   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
  23   SOFTWARE IS DISCLAIMED.
  24*/
  25
  26/* Bluetooth HCI connection handling. */
  27
  28#include <linux/export.h>
  29#include <linux/debugfs.h>
  30
  31#include <net/bluetooth/bluetooth.h>
  32#include <net/bluetooth/hci_core.h>
  33#include <net/bluetooth/l2cap.h>
  34#include <net/bluetooth/iso.h>
  35#include <net/bluetooth/mgmt.h>
  36
  37#include "hci_request.h"
  38#include "smp.h"
  39#include "a2mp.h"
  40#include "eir.h"
  41
  42struct sco_param {
  43	u16 pkt_type;
  44	u16 max_latency;
  45	u8  retrans_effort;
  46};
  47
  48struct conn_handle_t {
  49	struct hci_conn *conn;
  50	__u16 handle;
  51};
  52
  53static const struct sco_param esco_param_cvsd[] = {
  54	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x000a,	0x01 }, /* S3 */
  55	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x0007,	0x01 }, /* S2 */
  56	{ EDR_ESCO_MASK | ESCO_EV3,   0x0007,	0x01 }, /* S1 */
  57	{ EDR_ESCO_MASK | ESCO_HV3,   0xffff,	0x01 }, /* D1 */
  58	{ EDR_ESCO_MASK | ESCO_HV1,   0xffff,	0x01 }, /* D0 */
  59};
  60
  61static const struct sco_param sco_param_cvsd[] = {
  62	{ EDR_ESCO_MASK | ESCO_HV3,   0xffff,	0xff }, /* D1 */
  63	{ EDR_ESCO_MASK | ESCO_HV1,   0xffff,	0xff }, /* D0 */
  64};
  65
  66static const struct sco_param esco_param_msbc[] = {
  67	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x000d,	0x02 }, /* T2 */
  68	{ EDR_ESCO_MASK | ESCO_EV3,   0x0008,	0x02 }, /* T1 */
  69};
  70
  71/* This function requires the caller holds hdev->lock */
  72static void hci_connect_le_scan_cleanup(struct hci_conn *conn, u8 status)
  73{
  74	struct hci_conn_params *params;
  75	struct hci_dev *hdev = conn->hdev;
  76	struct smp_irk *irk;
  77	bdaddr_t *bdaddr;
  78	u8 bdaddr_type;
  79
  80	bdaddr = &conn->dst;
  81	bdaddr_type = conn->dst_type;
  82
  83	/* Check if we need to convert to identity address */
  84	irk = hci_get_irk(hdev, bdaddr, bdaddr_type);
  85	if (irk) {
  86		bdaddr = &irk->bdaddr;
  87		bdaddr_type = irk->addr_type;
  88	}
  89
  90	params = hci_pend_le_action_lookup(&hdev->pend_le_conns, bdaddr,
  91					   bdaddr_type);
  92	if (!params)
  93		return;
  94
  95	if (params->conn) {
  96		hci_conn_drop(params->conn);
  97		hci_conn_put(params->conn);
  98		params->conn = NULL;
  99	}
 100
 101	if (!params->explicit_connect)
 102		return;
 103
 104	/* If the status indicates successful cancellation of
 105	 * the attempt (i.e. Unknown Connection Id) there's no point of
 106	 * notifying failure since we'll go back to keep trying to
 107	 * connect. The only exception is explicit connect requests
 108	 * where a timeout + cancel does indicate an actual failure.
 109	 */
 110	if (status && status != HCI_ERROR_UNKNOWN_CONN_ID)
 111		mgmt_connect_failed(hdev, &conn->dst, conn->type,
 112				    conn->dst_type, status);
 113
 114	/* The connection attempt was doing scan for new RPA, and is
 115	 * in scan phase. If params are not associated with any other
 116	 * autoconnect action, remove them completely. If they are, just unmark
 117	 * them as waiting for connection, by clearing explicit_connect field.
 118	 */
 119	params->explicit_connect = false;
 120
 121	hci_pend_le_list_del_init(params);
 122
 123	switch (params->auto_connect) {
 124	case HCI_AUTO_CONN_EXPLICIT:
 125		hci_conn_params_del(hdev, bdaddr, bdaddr_type);
 126		/* return instead of break to avoid duplicate scan update */
 127		return;
 128	case HCI_AUTO_CONN_DIRECT:
 129	case HCI_AUTO_CONN_ALWAYS:
 130		hci_pend_le_list_add(params, &hdev->pend_le_conns);
 131		break;
 132	case HCI_AUTO_CONN_REPORT:
 133		hci_pend_le_list_add(params, &hdev->pend_le_reports);
 134		break;
 135	default:
 136		break;
 137	}
 138
 139	hci_update_passive_scan(hdev);
 140}
 141
 142static void hci_conn_cleanup(struct hci_conn *conn)
 143{
 144	struct hci_dev *hdev = conn->hdev;
 145
 146	if (test_bit(HCI_CONN_PARAM_REMOVAL_PEND, &conn->flags))
 147		hci_conn_params_del(conn->hdev, &conn->dst, conn->dst_type);
 148
 149	if (test_and_clear_bit(HCI_CONN_FLUSH_KEY, &conn->flags))
 150		hci_remove_link_key(hdev, &conn->dst);
 151
 152	hci_chan_list_flush(conn);
 153
 154	hci_conn_hash_del(hdev, conn);
 155
 156	if (HCI_CONN_HANDLE_UNSET(conn->handle))
 157		ida_free(&hdev->unset_handle_ida, conn->handle);
 158
 159	if (conn->cleanup)
 160		conn->cleanup(conn);
 161
 162	if (conn->type == SCO_LINK || conn->type == ESCO_LINK) {
 163		switch (conn->setting & SCO_AIRMODE_MASK) {
 164		case SCO_AIRMODE_CVSD:
 165		case SCO_AIRMODE_TRANSP:
 166			if (hdev->notify)
 167				hdev->notify(hdev, HCI_NOTIFY_DISABLE_SCO);
 168			break;
 169		}
 170	} else {
 171		if (hdev->notify)
 172			hdev->notify(hdev, HCI_NOTIFY_CONN_DEL);
 173	}
 174
 
 
 175	debugfs_remove_recursive(conn->debugfs);
 176
 177	hci_conn_del_sysfs(conn);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 178
 
 
 
 
 
 
 179	hci_dev_put(hdev);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 180}
 181
 182static void hci_acl_create_connection(struct hci_conn *conn)
 183{
 184	struct hci_dev *hdev = conn->hdev;
 185	struct inquiry_entry *ie;
 186	struct hci_cp_create_conn cp;
 187
 188	BT_DBG("hcon %p", conn);
 189
 190	/* Many controllers disallow HCI Create Connection while it is doing
 191	 * HCI Inquiry. So we cancel the Inquiry first before issuing HCI Create
 192	 * Connection. This may cause the MGMT discovering state to become false
 193	 * without user space's request but it is okay since the MGMT Discovery
 194	 * APIs do not promise that discovery should be done forever. Instead,
 195	 * the user space monitors the status of MGMT discovering and it may
 196	 * request for discovery again when this flag becomes false.
 197	 */
 198	if (test_bit(HCI_INQUIRY, &hdev->flags)) {
 199		/* Put this connection to "pending" state so that it will be
 200		 * executed after the inquiry cancel command complete event.
 201		 */
 202		conn->state = BT_CONNECT2;
 203		hci_send_cmd(hdev, HCI_OP_INQUIRY_CANCEL, 0, NULL);
 204		return;
 205	}
 206
 207	conn->state = BT_CONNECT;
 208	conn->out = true;
 209	conn->role = HCI_ROLE_MASTER;
 210
 211	conn->attempt++;
 212
 213	conn->link_policy = hdev->link_policy;
 214
 215	memset(&cp, 0, sizeof(cp));
 216	bacpy(&cp.bdaddr, &conn->dst);
 217	cp.pscan_rep_mode = 0x02;
 218
 219	ie = hci_inquiry_cache_lookup(hdev, &conn->dst);
 220	if (ie) {
 221		if (inquiry_entry_age(ie) <= INQUIRY_ENTRY_AGE_MAX) {
 222			cp.pscan_rep_mode = ie->data.pscan_rep_mode;
 223			cp.pscan_mode     = ie->data.pscan_mode;
 224			cp.clock_offset   = ie->data.clock_offset |
 225					    cpu_to_le16(0x8000);
 226		}
 227
 228		memcpy(conn->dev_class, ie->data.dev_class, 3);
 229	}
 230
 231	cp.pkt_type = cpu_to_le16(conn->pkt_type);
 232	if (lmp_rswitch_capable(hdev) && !(hdev->link_mode & HCI_LM_MASTER))
 233		cp.role_switch = 0x01;
 234	else
 235		cp.role_switch = 0x00;
 236
 237	hci_send_cmd(hdev, HCI_OP_CREATE_CONN, sizeof(cp), &cp);
 238}
 239
 240int hci_disconnect(struct hci_conn *conn, __u8 reason)
 241{
 242	BT_DBG("hcon %p", conn);
 243
 244	/* When we are central of an established connection and it enters
 245	 * the disconnect timeout, then go ahead and try to read the
 246	 * current clock offset.  Processing of the result is done
 247	 * within the event handling and hci_clock_offset_evt function.
 248	 */
 249	if (conn->type == ACL_LINK && conn->role == HCI_ROLE_MASTER &&
 250	    (conn->state == BT_CONNECTED || conn->state == BT_CONFIG)) {
 251		struct hci_dev *hdev = conn->hdev;
 252		struct hci_cp_read_clock_offset clkoff_cp;
 253
 254		clkoff_cp.handle = cpu_to_le16(conn->handle);
 255		hci_send_cmd(hdev, HCI_OP_READ_CLOCK_OFFSET, sizeof(clkoff_cp),
 256			     &clkoff_cp);
 257	}
 258
 259	return hci_abort_conn(conn, reason);
 260}
 261
 262static void hci_add_sco(struct hci_conn *conn, __u16 handle)
 263{
 264	struct hci_dev *hdev = conn->hdev;
 265	struct hci_cp_add_sco cp;
 266
 267	BT_DBG("hcon %p", conn);
 268
 269	conn->state = BT_CONNECT;
 270	conn->out = true;
 271
 272	conn->attempt++;
 273
 274	cp.handle   = cpu_to_le16(handle);
 275	cp.pkt_type = cpu_to_le16(conn->pkt_type);
 276
 277	hci_send_cmd(hdev, HCI_OP_ADD_SCO, sizeof(cp), &cp);
 278}
 279
 280static bool find_next_esco_param(struct hci_conn *conn,
 281				 const struct sco_param *esco_param, int size)
 282{
 283	if (!conn->parent)
 284		return false;
 285
 286	for (; conn->attempt <= size; conn->attempt++) {
 287		if (lmp_esco_2m_capable(conn->parent) ||
 288		    (esco_param[conn->attempt - 1].pkt_type & ESCO_2EV3))
 289			break;
 290		BT_DBG("hcon %p skipped attempt %d, eSCO 2M not supported",
 291		       conn, conn->attempt);
 292	}
 293
 294	return conn->attempt <= size;
 295}
 296
 297static int configure_datapath_sync(struct hci_dev *hdev, struct bt_codec *codec)
 298{
 299	int err;
 300	__u8 vnd_len, *vnd_data = NULL;
 301	struct hci_op_configure_data_path *cmd = NULL;
 302
 303	if (!codec->data_path || !hdev->get_codec_config_data)
 304		return 0;
 305
 306	/* Do not take me as error */
 307	if (!hdev->get_codec_config_data)
 308		return 0;
 309
 310	err = hdev->get_codec_config_data(hdev, ESCO_LINK, codec, &vnd_len,
 311					  &vnd_data);
 312	if (err < 0)
 313		goto error;
 314
 315	cmd = kzalloc(sizeof(*cmd) + vnd_len, GFP_KERNEL);
 316	if (!cmd) {
 317		err = -ENOMEM;
 318		goto error;
 319	}
 320
 321	err = hdev->get_data_path_id(hdev, &cmd->data_path_id);
 322	if (err < 0)
 323		goto error;
 324
 325	cmd->vnd_len = vnd_len;
 326	memcpy(cmd->vnd_data, vnd_data, vnd_len);
 327
 328	cmd->direction = 0x00;
 329	__hci_cmd_sync_status(hdev, HCI_CONFIGURE_DATA_PATH,
 330			      sizeof(*cmd) + vnd_len, cmd, HCI_CMD_TIMEOUT);
 331
 332	cmd->direction = 0x01;
 333	err = __hci_cmd_sync_status(hdev, HCI_CONFIGURE_DATA_PATH,
 334				    sizeof(*cmd) + vnd_len, cmd,
 335				    HCI_CMD_TIMEOUT);
 336error:
 337
 338	kfree(cmd);
 339	kfree(vnd_data);
 340	return err;
 341}
 342
 343static int hci_enhanced_setup_sync(struct hci_dev *hdev, void *data)
 344{
 345	struct conn_handle_t *conn_handle = data;
 346	struct hci_conn *conn = conn_handle->conn;
 347	__u16 handle = conn_handle->handle;
 348	struct hci_cp_enhanced_setup_sync_conn cp;
 349	const struct sco_param *param;
 350
 351	kfree(conn_handle);
 352
 353	bt_dev_dbg(hdev, "hcon %p", conn);
 354
 355	configure_datapath_sync(hdev, &conn->codec);
 356
 357	conn->state = BT_CONNECT;
 358	conn->out = true;
 359
 360	conn->attempt++;
 361
 362	memset(&cp, 0x00, sizeof(cp));
 363
 364	cp.handle   = cpu_to_le16(handle);
 365
 366	cp.tx_bandwidth   = cpu_to_le32(0x00001f40);
 367	cp.rx_bandwidth   = cpu_to_le32(0x00001f40);
 368
 369	switch (conn->codec.id) {
 370	case BT_CODEC_MSBC:
 371		if (!find_next_esco_param(conn, esco_param_msbc,
 372					  ARRAY_SIZE(esco_param_msbc)))
 373			return -EINVAL;
 374
 375		param = &esco_param_msbc[conn->attempt - 1];
 376		cp.tx_coding_format.id = 0x05;
 377		cp.rx_coding_format.id = 0x05;
 378		cp.tx_codec_frame_size = __cpu_to_le16(60);
 379		cp.rx_codec_frame_size = __cpu_to_le16(60);
 380		cp.in_bandwidth = __cpu_to_le32(32000);
 381		cp.out_bandwidth = __cpu_to_le32(32000);
 382		cp.in_coding_format.id = 0x04;
 383		cp.out_coding_format.id = 0x04;
 384		cp.in_coded_data_size = __cpu_to_le16(16);
 385		cp.out_coded_data_size = __cpu_to_le16(16);
 386		cp.in_pcm_data_format = 2;
 387		cp.out_pcm_data_format = 2;
 388		cp.in_pcm_sample_payload_msb_pos = 0;
 389		cp.out_pcm_sample_payload_msb_pos = 0;
 390		cp.in_data_path = conn->codec.data_path;
 391		cp.out_data_path = conn->codec.data_path;
 392		cp.in_transport_unit_size = 1;
 393		cp.out_transport_unit_size = 1;
 394		break;
 395
 396	case BT_CODEC_TRANSPARENT:
 397		if (!find_next_esco_param(conn, esco_param_msbc,
 398					  ARRAY_SIZE(esco_param_msbc)))
 399			return false;
 400		param = &esco_param_msbc[conn->attempt - 1];
 401		cp.tx_coding_format.id = 0x03;
 402		cp.rx_coding_format.id = 0x03;
 403		cp.tx_codec_frame_size = __cpu_to_le16(60);
 404		cp.rx_codec_frame_size = __cpu_to_le16(60);
 405		cp.in_bandwidth = __cpu_to_le32(0x1f40);
 406		cp.out_bandwidth = __cpu_to_le32(0x1f40);
 407		cp.in_coding_format.id = 0x03;
 408		cp.out_coding_format.id = 0x03;
 409		cp.in_coded_data_size = __cpu_to_le16(16);
 410		cp.out_coded_data_size = __cpu_to_le16(16);
 411		cp.in_pcm_data_format = 2;
 412		cp.out_pcm_data_format = 2;
 413		cp.in_pcm_sample_payload_msb_pos = 0;
 414		cp.out_pcm_sample_payload_msb_pos = 0;
 415		cp.in_data_path = conn->codec.data_path;
 416		cp.out_data_path = conn->codec.data_path;
 417		cp.in_transport_unit_size = 1;
 418		cp.out_transport_unit_size = 1;
 419		break;
 420
 421	case BT_CODEC_CVSD:
 422		if (conn->parent && lmp_esco_capable(conn->parent)) {
 423			if (!find_next_esco_param(conn, esco_param_cvsd,
 424						  ARRAY_SIZE(esco_param_cvsd)))
 425				return -EINVAL;
 426			param = &esco_param_cvsd[conn->attempt - 1];
 427		} else {
 428			if (conn->attempt > ARRAY_SIZE(sco_param_cvsd))
 429				return -EINVAL;
 430			param = &sco_param_cvsd[conn->attempt - 1];
 431		}
 432		cp.tx_coding_format.id = 2;
 433		cp.rx_coding_format.id = 2;
 434		cp.tx_codec_frame_size = __cpu_to_le16(60);
 435		cp.rx_codec_frame_size = __cpu_to_le16(60);
 436		cp.in_bandwidth = __cpu_to_le32(16000);
 437		cp.out_bandwidth = __cpu_to_le32(16000);
 438		cp.in_coding_format.id = 4;
 439		cp.out_coding_format.id = 4;
 440		cp.in_coded_data_size = __cpu_to_le16(16);
 441		cp.out_coded_data_size = __cpu_to_le16(16);
 442		cp.in_pcm_data_format = 2;
 443		cp.out_pcm_data_format = 2;
 444		cp.in_pcm_sample_payload_msb_pos = 0;
 445		cp.out_pcm_sample_payload_msb_pos = 0;
 446		cp.in_data_path = conn->codec.data_path;
 447		cp.out_data_path = conn->codec.data_path;
 448		cp.in_transport_unit_size = 16;
 449		cp.out_transport_unit_size = 16;
 450		break;
 451	default:
 452		return -EINVAL;
 453	}
 454
 455	cp.retrans_effort = param->retrans_effort;
 456	cp.pkt_type = __cpu_to_le16(param->pkt_type);
 457	cp.max_latency = __cpu_to_le16(param->max_latency);
 458
 459	if (hci_send_cmd(hdev, HCI_OP_ENHANCED_SETUP_SYNC_CONN, sizeof(cp), &cp) < 0)
 460		return -EIO;
 461
 462	return 0;
 463}
 464
 465static bool hci_setup_sync_conn(struct hci_conn *conn, __u16 handle)
 466{
 467	struct hci_dev *hdev = conn->hdev;
 468	struct hci_cp_setup_sync_conn cp;
 469	const struct sco_param *param;
 470
 471	bt_dev_dbg(hdev, "hcon %p", conn);
 472
 473	conn->state = BT_CONNECT;
 474	conn->out = true;
 475
 476	conn->attempt++;
 477
 478	cp.handle   = cpu_to_le16(handle);
 479
 480	cp.tx_bandwidth   = cpu_to_le32(0x00001f40);
 481	cp.rx_bandwidth   = cpu_to_le32(0x00001f40);
 482	cp.voice_setting  = cpu_to_le16(conn->setting);
 483
 484	switch (conn->setting & SCO_AIRMODE_MASK) {
 485	case SCO_AIRMODE_TRANSP:
 486		if (!find_next_esco_param(conn, esco_param_msbc,
 487					  ARRAY_SIZE(esco_param_msbc)))
 488			return false;
 489		param = &esco_param_msbc[conn->attempt - 1];
 490		break;
 491	case SCO_AIRMODE_CVSD:
 492		if (conn->parent && lmp_esco_capable(conn->parent)) {
 493			if (!find_next_esco_param(conn, esco_param_cvsd,
 494						  ARRAY_SIZE(esco_param_cvsd)))
 495				return false;
 496			param = &esco_param_cvsd[conn->attempt - 1];
 497		} else {
 498			if (conn->attempt > ARRAY_SIZE(sco_param_cvsd))
 499				return false;
 500			param = &sco_param_cvsd[conn->attempt - 1];
 501		}
 502		break;
 503	default:
 504		return false;
 505	}
 506
 507	cp.retrans_effort = param->retrans_effort;
 508	cp.pkt_type = __cpu_to_le16(param->pkt_type);
 509	cp.max_latency = __cpu_to_le16(param->max_latency);
 510
 511	if (hci_send_cmd(hdev, HCI_OP_SETUP_SYNC_CONN, sizeof(cp), &cp) < 0)
 512		return false;
 513
 514	return true;
 515}
 516
 517bool hci_setup_sync(struct hci_conn *conn, __u16 handle)
 518{
 519	int result;
 520	struct conn_handle_t *conn_handle;
 521
 522	if (enhanced_sync_conn_capable(conn->hdev)) {
 523		conn_handle = kzalloc(sizeof(*conn_handle), GFP_KERNEL);
 524
 525		if (!conn_handle)
 526			return false;
 527
 528		conn_handle->conn = conn;
 529		conn_handle->handle = handle;
 530		result = hci_cmd_sync_queue(conn->hdev, hci_enhanced_setup_sync,
 531					    conn_handle, NULL);
 532		if (result < 0)
 533			kfree(conn_handle);
 534
 535		return result == 0;
 536	}
 537
 538	return hci_setup_sync_conn(conn, handle);
 539}
 540
 541u8 hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max, u16 latency,
 542		      u16 to_multiplier)
 543{
 544	struct hci_dev *hdev = conn->hdev;
 545	struct hci_conn_params *params;
 546	struct hci_cp_le_conn_update cp;
 547
 548	hci_dev_lock(hdev);
 549
 550	params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
 551	if (params) {
 552		params->conn_min_interval = min;
 553		params->conn_max_interval = max;
 554		params->conn_latency = latency;
 555		params->supervision_timeout = to_multiplier;
 556	}
 557
 558	hci_dev_unlock(hdev);
 559
 560	memset(&cp, 0, sizeof(cp));
 561	cp.handle		= cpu_to_le16(conn->handle);
 562	cp.conn_interval_min	= cpu_to_le16(min);
 563	cp.conn_interval_max	= cpu_to_le16(max);
 564	cp.conn_latency		= cpu_to_le16(latency);
 565	cp.supervision_timeout	= cpu_to_le16(to_multiplier);
 566	cp.min_ce_len		= cpu_to_le16(0x0000);
 567	cp.max_ce_len		= cpu_to_le16(0x0000);
 568
 569	hci_send_cmd(hdev, HCI_OP_LE_CONN_UPDATE, sizeof(cp), &cp);
 570
 571	if (params)
 572		return 0x01;
 573
 574	return 0x00;
 575}
 576
 577void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __le64 rand,
 578		      __u8 ltk[16], __u8 key_size)
 579{
 580	struct hci_dev *hdev = conn->hdev;
 581	struct hci_cp_le_start_enc cp;
 582
 583	BT_DBG("hcon %p", conn);
 584
 585	memset(&cp, 0, sizeof(cp));
 586
 587	cp.handle = cpu_to_le16(conn->handle);
 588	cp.rand = rand;
 589	cp.ediv = ediv;
 590	memcpy(cp.ltk, ltk, key_size);
 591
 592	hci_send_cmd(hdev, HCI_OP_LE_START_ENC, sizeof(cp), &cp);
 593}
 594
 595/* Device _must_ be locked */
 596void hci_sco_setup(struct hci_conn *conn, __u8 status)
 597{
 598	struct hci_link *link;
 599
 600	link = list_first_entry_or_null(&conn->link_list, struct hci_link, list);
 601	if (!link || !link->conn)
 602		return;
 603
 604	BT_DBG("hcon %p", conn);
 605
 606	if (!status) {
 607		if (lmp_esco_capable(conn->hdev))
 608			hci_setup_sync(link->conn, conn->handle);
 609		else
 610			hci_add_sco(link->conn, conn->handle);
 611	} else {
 612		hci_connect_cfm(link->conn, status);
 613		hci_conn_del(link->conn);
 614	}
 615}
 616
 617static void hci_conn_timeout(struct work_struct *work)
 618{
 619	struct hci_conn *conn = container_of(work, struct hci_conn,
 620					     disc_work.work);
 621	int refcnt = atomic_read(&conn->refcnt);
 622
 623	BT_DBG("hcon %p state %s", conn, state_to_string(conn->state));
 624
 625	WARN_ON(refcnt < 0);
 626
 627	/* FIXME: It was observed that in pairing failed scenario, refcnt
 628	 * drops below 0. Probably this is because l2cap_conn_del calls
 629	 * l2cap_chan_del for each channel, and inside l2cap_chan_del conn is
 630	 * dropped. After that loop hci_chan_del is called which also drops
 631	 * conn. For now make sure that ACL is alive if refcnt is higher then 0,
 632	 * otherwise drop it.
 633	 */
 634	if (refcnt > 0)
 635		return;
 636
 
 
 
 
 
 
 
 637	hci_abort_conn(conn, hci_proto_disconn_ind(conn));
 638}
 639
 640/* Enter sniff mode */
 641static void hci_conn_idle(struct work_struct *work)
 642{
 643	struct hci_conn *conn = container_of(work, struct hci_conn,
 644					     idle_work.work);
 645	struct hci_dev *hdev = conn->hdev;
 646
 647	BT_DBG("hcon %p mode %d", conn, conn->mode);
 648
 649	if (!lmp_sniff_capable(hdev) || !lmp_sniff_capable(conn))
 650		return;
 651
 652	if (conn->mode != HCI_CM_ACTIVE || !(conn->link_policy & HCI_LP_SNIFF))
 653		return;
 654
 655	if (lmp_sniffsubr_capable(hdev) && lmp_sniffsubr_capable(conn)) {
 656		struct hci_cp_sniff_subrate cp;
 657		cp.handle             = cpu_to_le16(conn->handle);
 658		cp.max_latency        = cpu_to_le16(0);
 659		cp.min_remote_timeout = cpu_to_le16(0);
 660		cp.min_local_timeout  = cpu_to_le16(0);
 661		hci_send_cmd(hdev, HCI_OP_SNIFF_SUBRATE, sizeof(cp), &cp);
 662	}
 663
 664	if (!test_and_set_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags)) {
 665		struct hci_cp_sniff_mode cp;
 666		cp.handle       = cpu_to_le16(conn->handle);
 667		cp.max_interval = cpu_to_le16(hdev->sniff_max_interval);
 668		cp.min_interval = cpu_to_le16(hdev->sniff_min_interval);
 669		cp.attempt      = cpu_to_le16(4);
 670		cp.timeout      = cpu_to_le16(1);
 671		hci_send_cmd(hdev, HCI_OP_SNIFF_MODE, sizeof(cp), &cp);
 672	}
 673}
 674
 675static void hci_conn_auto_accept(struct work_struct *work)
 676{
 677	struct hci_conn *conn = container_of(work, struct hci_conn,
 678					     auto_accept_work.work);
 679
 680	hci_send_cmd(conn->hdev, HCI_OP_USER_CONFIRM_REPLY, sizeof(conn->dst),
 681		     &conn->dst);
 682}
 683
 684static void le_disable_advertising(struct hci_dev *hdev)
 685{
 686	if (ext_adv_capable(hdev)) {
 687		struct hci_cp_le_set_ext_adv_enable cp;
 688
 689		cp.enable = 0x00;
 690		cp.num_of_sets = 0x00;
 691
 692		hci_send_cmd(hdev, HCI_OP_LE_SET_EXT_ADV_ENABLE, sizeof(cp),
 693			     &cp);
 694	} else {
 695		u8 enable = 0x00;
 696		hci_send_cmd(hdev, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable),
 697			     &enable);
 698	}
 699}
 700
 701static void le_conn_timeout(struct work_struct *work)
 702{
 703	struct hci_conn *conn = container_of(work, struct hci_conn,
 704					     le_conn_timeout.work);
 705	struct hci_dev *hdev = conn->hdev;
 706
 707	BT_DBG("");
 708
 709	/* We could end up here due to having done directed advertising,
 710	 * so clean up the state if necessary. This should however only
 711	 * happen with broken hardware or if low duty cycle was used
 712	 * (which doesn't have a timeout of its own).
 713	 */
 714	if (conn->role == HCI_ROLE_SLAVE) {
 715		/* Disable LE Advertising */
 716		le_disable_advertising(hdev);
 717		hci_dev_lock(hdev);
 718		hci_conn_failed(conn, HCI_ERROR_ADVERTISING_TIMEOUT);
 719		hci_dev_unlock(hdev);
 720		return;
 721	}
 722
 723	hci_abort_conn(conn, HCI_ERROR_REMOTE_USER_TERM);
 724}
 725
 726struct iso_cig_params {
 727	struct hci_cp_le_set_cig_params cp;
 728	struct hci_cis_params cis[0x1f];
 729};
 730
 731struct iso_list_data {
 732	union {
 733		u8  cig;
 734		u8  big;
 735	};
 736	union {
 737		u8  cis;
 738		u8  bis;
 739		u16 sync_handle;
 740	};
 741	int count;
 742	bool big_term;
 743	bool pa_sync_term;
 744	bool big_sync_term;
 745};
 746
 747static void bis_list(struct hci_conn *conn, void *data)
 748{
 749	struct iso_list_data *d = data;
 750
 751	/* Skip if not broadcast/ANY address */
 752	if (bacmp(&conn->dst, BDADDR_ANY))
 753		return;
 754
 755	if (d->big != conn->iso_qos.bcast.big || d->bis == BT_ISO_QOS_BIS_UNSET ||
 756	    d->bis != conn->iso_qos.bcast.bis)
 757		return;
 758
 759	d->count++;
 760}
 761
 762static int terminate_big_sync(struct hci_dev *hdev, void *data)
 763{
 764	struct iso_list_data *d = data;
 765
 766	bt_dev_dbg(hdev, "big 0x%2.2x bis 0x%2.2x", d->big, d->bis);
 767
 768	hci_disable_per_advertising_sync(hdev, d->bis);
 769	hci_remove_ext_adv_instance_sync(hdev, d->bis, NULL);
 770
 771	/* Only terminate BIG if it has been created */
 772	if (!d->big_term)
 773		return 0;
 774
 775	return hci_le_terminate_big_sync(hdev, d->big,
 776					 HCI_ERROR_LOCAL_HOST_TERM);
 777}
 778
 779static void terminate_big_destroy(struct hci_dev *hdev, void *data, int err)
 780{
 781	kfree(data);
 782}
 783
 784static int hci_le_terminate_big(struct hci_dev *hdev, struct hci_conn *conn)
 785{
 786	struct iso_list_data *d;
 787	int ret;
 788
 789	bt_dev_dbg(hdev, "big 0x%2.2x bis 0x%2.2x", conn->iso_qos.bcast.big,
 790		   conn->iso_qos.bcast.bis);
 791
 792	d = kzalloc(sizeof(*d), GFP_KERNEL);
 793	if (!d)
 794		return -ENOMEM;
 795
 796	d->big = conn->iso_qos.bcast.big;
 797	d->bis = conn->iso_qos.bcast.bis;
 798	d->big_term = test_and_clear_bit(HCI_CONN_BIG_CREATED, &conn->flags);
 799
 800	ret = hci_cmd_sync_queue(hdev, terminate_big_sync, d,
 801				 terminate_big_destroy);
 802	if (ret)
 803		kfree(d);
 804
 805	return ret;
 806}
 807
 808static int big_terminate_sync(struct hci_dev *hdev, void *data)
 809{
 810	struct iso_list_data *d = data;
 811
 812	bt_dev_dbg(hdev, "big 0x%2.2x sync_handle 0x%4.4x", d->big,
 813		   d->sync_handle);
 814
 815	if (d->big_sync_term)
 816		hci_le_big_terminate_sync(hdev, d->big);
 817
 818	if (d->pa_sync_term)
 819		return hci_le_pa_terminate_sync(hdev, d->sync_handle);
 820
 821	return 0;
 822}
 823
 824static void find_bis(struct hci_conn *conn, void *data)
 825{
 826	struct iso_list_data *d = data;
 827
 828	/* Ignore if BIG doesn't match */
 829	if (d->big != conn->iso_qos.bcast.big)
 830		return;
 831
 832	d->count++;
 833}
 834
 835static int hci_le_big_terminate(struct hci_dev *hdev, u8 big, struct hci_conn *conn)
 836{
 837	struct iso_list_data *d;
 838	int ret;
 839
 840	bt_dev_dbg(hdev, "big 0x%2.2x sync_handle 0x%4.4x", big, conn->sync_handle);
 841
 842	d = kzalloc(sizeof(*d), GFP_KERNEL);
 843	if (!d)
 844		return -ENOMEM;
 845
 846	memset(d, 0, sizeof(*d));
 847	d->big = big;
 848	d->sync_handle = conn->sync_handle;
 849
 850	if (test_and_clear_bit(HCI_CONN_PA_SYNC, &conn->flags)) {
 851		hci_conn_hash_list_flag(hdev, find_bis, ISO_LINK,
 852					HCI_CONN_PA_SYNC, d);
 853
 854		if (!d->count)
 855			d->pa_sync_term = true;
 856
 857		d->count = 0;
 858	}
 859
 860	if (test_and_clear_bit(HCI_CONN_BIG_SYNC, &conn->flags)) {
 861		hci_conn_hash_list_flag(hdev, find_bis, ISO_LINK,
 862					HCI_CONN_BIG_SYNC, d);
 863
 864		if (!d->count)
 865			d->big_sync_term = true;
 866	}
 867
 868	ret = hci_cmd_sync_queue(hdev, big_terminate_sync, d,
 869				 terminate_big_destroy);
 870	if (ret)
 871		kfree(d);
 872
 873	return ret;
 874}
 875
 876/* Cleanup BIS connection
 877 *
 878 * Detects if there any BIS left connected in a BIG
 879 * broadcaster: Remove advertising instance and terminate BIG.
 880 * broadcaster receiver: Teminate BIG sync and terminate PA sync.
 881 */
 882static void bis_cleanup(struct hci_conn *conn)
 883{
 884	struct hci_dev *hdev = conn->hdev;
 885	struct hci_conn *bis;
 886
 887	bt_dev_dbg(hdev, "conn %p", conn);
 888
 889	if (conn->role == HCI_ROLE_MASTER) {
 890		if (!test_and_clear_bit(HCI_CONN_PER_ADV, &conn->flags))
 891			return;
 892
 893		/* Check if ISO connection is a BIS and terminate advertising
 894		 * set and BIG if there are no other connections using it.
 895		 */
 896		bis = hci_conn_hash_lookup_big(hdev, conn->iso_qos.bcast.big);
 897		if (bis)
 898			return;
 899
 900		hci_le_terminate_big(hdev, conn);
 901	} else {
 902		hci_le_big_terminate(hdev, conn->iso_qos.bcast.big,
 903				     conn);
 904	}
 905}
 906
 907static int remove_cig_sync(struct hci_dev *hdev, void *data)
 908{
 909	u8 handle = PTR_UINT(data);
 910
 911	return hci_le_remove_cig_sync(hdev, handle);
 912}
 913
 914static int hci_le_remove_cig(struct hci_dev *hdev, u8 handle)
 915{
 916	bt_dev_dbg(hdev, "handle 0x%2.2x", handle);
 917
 918	return hci_cmd_sync_queue(hdev, remove_cig_sync, UINT_PTR(handle),
 919				  NULL);
 920}
 921
 922static void find_cis(struct hci_conn *conn, void *data)
 923{
 924	struct iso_list_data *d = data;
 925
 926	/* Ignore broadcast or if CIG don't match */
 927	if (!bacmp(&conn->dst, BDADDR_ANY) || d->cig != conn->iso_qos.ucast.cig)
 928		return;
 929
 930	d->count++;
 931}
 932
 933/* Cleanup CIS connection:
 934 *
 935 * Detects if there any CIS left connected in a CIG and remove it.
 936 */
 937static void cis_cleanup(struct hci_conn *conn)
 938{
 939	struct hci_dev *hdev = conn->hdev;
 940	struct iso_list_data d;
 941
 942	if (conn->iso_qos.ucast.cig == BT_ISO_QOS_CIG_UNSET)
 943		return;
 944
 945	memset(&d, 0, sizeof(d));
 946	d.cig = conn->iso_qos.ucast.cig;
 947
 948	/* Check if ISO connection is a CIS and remove CIG if there are
 949	 * no other connections using it.
 950	 */
 951	hci_conn_hash_list_state(hdev, find_cis, ISO_LINK, BT_BOUND, &d);
 952	hci_conn_hash_list_state(hdev, find_cis, ISO_LINK, BT_CONNECT, &d);
 953	hci_conn_hash_list_state(hdev, find_cis, ISO_LINK, BT_CONNECTED, &d);
 954	if (d.count)
 955		return;
 956
 957	hci_le_remove_cig(hdev, conn->iso_qos.ucast.cig);
 958}
 959
 960static int hci_conn_hash_alloc_unset(struct hci_dev *hdev)
 961{
 962	return ida_alloc_range(&hdev->unset_handle_ida, HCI_CONN_HANDLE_MAX + 1,
 963			       U16_MAX, GFP_ATOMIC);
 964}
 965
 966struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst,
 967			      u8 role, u16 handle)
 968{
 969	struct hci_conn *conn;
 970
 971	bt_dev_dbg(hdev, "dst %pMR handle 0x%4.4x", dst, handle);
 972
 973	conn = kzalloc(sizeof(*conn), GFP_KERNEL);
 974	if (!conn)
 975		return NULL;
 976
 977	bacpy(&conn->dst, dst);
 978	bacpy(&conn->src, &hdev->bdaddr);
 979	conn->handle = handle;
 980	conn->hdev  = hdev;
 981	conn->type  = type;
 982	conn->role  = role;
 983	conn->mode  = HCI_CM_ACTIVE;
 984	conn->state = BT_OPEN;
 985	conn->auth_type = HCI_AT_GENERAL_BONDING;
 986	conn->io_capability = hdev->io_capability;
 987	conn->remote_auth = 0xff;
 988	conn->key_type = 0xff;
 989	conn->rssi = HCI_RSSI_INVALID;
 990	conn->tx_power = HCI_TX_POWER_INVALID;
 991	conn->max_tx_power = HCI_TX_POWER_INVALID;
 992	conn->sync_handle = HCI_SYNC_HANDLE_INVALID;
 993
 994	set_bit(HCI_CONN_POWER_SAVE, &conn->flags);
 995	conn->disc_timeout = HCI_DISCONN_TIMEOUT;
 996
 997	/* Set Default Authenticated payload timeout to 30s */
 998	conn->auth_payload_timeout = DEFAULT_AUTH_PAYLOAD_TIMEOUT;
 999
1000	if (conn->role == HCI_ROLE_MASTER)
1001		conn->out = true;
1002
1003	switch (type) {
1004	case ACL_LINK:
1005		conn->pkt_type = hdev->pkt_type & ACL_PTYPE_MASK;
1006		break;
1007	case LE_LINK:
1008		/* conn->src should reflect the local identity address */
1009		hci_copy_identity_address(hdev, &conn->src, &conn->src_type);
1010		break;
1011	case ISO_LINK:
1012		/* conn->src should reflect the local identity address */
1013		hci_copy_identity_address(hdev, &conn->src, &conn->src_type);
1014
1015		/* set proper cleanup function */
1016		if (!bacmp(dst, BDADDR_ANY))
1017			conn->cleanup = bis_cleanup;
1018		else if (conn->role == HCI_ROLE_MASTER)
1019			conn->cleanup = cis_cleanup;
1020
1021		break;
1022	case SCO_LINK:
1023		if (lmp_esco_capable(hdev))
1024			conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
1025					(hdev->esco_type & EDR_ESCO_MASK);
1026		else
1027			conn->pkt_type = hdev->pkt_type & SCO_PTYPE_MASK;
1028		break;
1029	case ESCO_LINK:
1030		conn->pkt_type = hdev->esco_type & ~EDR_ESCO_MASK;
1031		break;
1032	}
1033
1034	skb_queue_head_init(&conn->data_q);
1035
1036	INIT_LIST_HEAD(&conn->chan_list);
1037	INIT_LIST_HEAD(&conn->link_list);
1038
1039	INIT_DELAYED_WORK(&conn->disc_work, hci_conn_timeout);
1040	INIT_DELAYED_WORK(&conn->auto_accept_work, hci_conn_auto_accept);
1041	INIT_DELAYED_WORK(&conn->idle_work, hci_conn_idle);
1042	INIT_DELAYED_WORK(&conn->le_conn_timeout, le_conn_timeout);
 
1043
1044	atomic_set(&conn->refcnt, 0);
1045
1046	hci_dev_hold(hdev);
1047
1048	hci_conn_hash_add(hdev, conn);
1049
1050	/* The SCO and eSCO connections will only be notified when their
1051	 * setup has been completed. This is different to ACL links which
1052	 * can be notified right away.
1053	 */
1054	if (conn->type != SCO_LINK && conn->type != ESCO_LINK) {
1055		if (hdev->notify)
1056			hdev->notify(hdev, HCI_NOTIFY_CONN_ADD);
1057	}
1058
1059	hci_conn_init_sysfs(conn);
1060
1061	return conn;
1062}
1063
1064struct hci_conn *hci_conn_add_unset(struct hci_dev *hdev, int type,
1065				    bdaddr_t *dst, u8 role)
1066{
1067	int handle;
1068
1069	bt_dev_dbg(hdev, "dst %pMR", dst);
1070
1071	handle = hci_conn_hash_alloc_unset(hdev);
1072	if (unlikely(handle < 0))
1073		return NULL;
1074
1075	return hci_conn_add(hdev, type, dst, role, handle);
1076}
1077
1078static void hci_conn_cleanup_child(struct hci_conn *conn, u8 reason)
1079{
1080	if (!reason)
1081		reason = HCI_ERROR_REMOTE_USER_TERM;
1082
1083	/* Due to race, SCO/ISO conn might be not established yet at this point,
1084	 * and nothing else will clean it up. In other cases it is done via HCI
1085	 * events.
1086	 */
1087	switch (conn->type) {
1088	case SCO_LINK:
1089	case ESCO_LINK:
1090		if (HCI_CONN_HANDLE_UNSET(conn->handle))
1091			hci_conn_failed(conn, reason);
1092		break;
1093	case ISO_LINK:
1094		if ((conn->state != BT_CONNECTED &&
1095		    !test_bit(HCI_CONN_CREATE_CIS, &conn->flags)) ||
1096		    test_bit(HCI_CONN_BIG_CREATED, &conn->flags))
1097			hci_conn_failed(conn, reason);
1098		break;
1099	}
1100}
1101
1102static void hci_conn_unlink(struct hci_conn *conn)
1103{
1104	struct hci_dev *hdev = conn->hdev;
1105
1106	bt_dev_dbg(hdev, "hcon %p", conn);
1107
1108	if (!conn->parent) {
1109		struct hci_link *link, *t;
1110
1111		list_for_each_entry_safe(link, t, &conn->link_list, list) {
1112			struct hci_conn *child = link->conn;
1113
1114			hci_conn_unlink(child);
1115
1116			/* If hdev is down it means
1117			 * hci_dev_close_sync/hci_conn_hash_flush is in progress
1118			 * and links don't need to be cleanup as all connections
1119			 * would be cleanup.
1120			 */
1121			if (!test_bit(HCI_UP, &hdev->flags))
1122				continue;
1123
1124			hci_conn_cleanup_child(child, conn->abort_reason);
1125		}
1126
1127		return;
1128	}
1129
1130	if (!conn->link)
1131		return;
1132
1133	list_del_rcu(&conn->link->list);
1134	synchronize_rcu();
1135
1136	hci_conn_drop(conn->parent);
1137	hci_conn_put(conn->parent);
1138	conn->parent = NULL;
1139
1140	kfree(conn->link);
1141	conn->link = NULL;
1142}
1143
1144void hci_conn_del(struct hci_conn *conn)
1145{
1146	struct hci_dev *hdev = conn->hdev;
1147
1148	BT_DBG("%s hcon %p handle %d", hdev->name, conn, conn->handle);
1149
1150	hci_conn_unlink(conn);
1151
1152	cancel_delayed_work_sync(&conn->disc_work);
1153	cancel_delayed_work_sync(&conn->auto_accept_work);
1154	cancel_delayed_work_sync(&conn->idle_work);
1155
1156	if (conn->type == ACL_LINK) {
 
 
 
 
1157		/* Unacked frames */
1158		hdev->acl_cnt += conn->sent;
1159	} else if (conn->type == LE_LINK) {
1160		cancel_delayed_work(&conn->le_conn_timeout);
1161
1162		if (hdev->le_pkts)
1163			hdev->le_cnt += conn->sent;
1164		else
1165			hdev->acl_cnt += conn->sent;
1166	} else {
1167		/* Unacked ISO frames */
1168		if (conn->type == ISO_LINK) {
1169			if (hdev->iso_pkts)
1170				hdev->iso_cnt += conn->sent;
1171			else if (hdev->le_pkts)
1172				hdev->le_cnt += conn->sent;
1173			else
1174				hdev->acl_cnt += conn->sent;
1175		}
1176	}
1177
1178	if (conn->amp_mgr)
1179		amp_mgr_put(conn->amp_mgr);
1180
1181	skb_queue_purge(&conn->data_q);
1182
1183	/* Remove the connection from the list and cleanup its remaining
1184	 * state. This is a separate function since for some cases like
1185	 * BT_CONNECT_SCAN we *only* want the cleanup part without the
1186	 * rest of hci_conn_del.
1187	 */
1188	hci_conn_cleanup(conn);
 
 
1189}
1190
1191struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src, uint8_t src_type)
1192{
1193	int use_src = bacmp(src, BDADDR_ANY);
1194	struct hci_dev *hdev = NULL, *d;
1195
1196	BT_DBG("%pMR -> %pMR", src, dst);
1197
1198	read_lock(&hci_dev_list_lock);
1199
1200	list_for_each_entry(d, &hci_dev_list, list) {
1201		if (!test_bit(HCI_UP, &d->flags) ||
1202		    hci_dev_test_flag(d, HCI_USER_CHANNEL) ||
1203		    d->dev_type != HCI_PRIMARY)
1204			continue;
1205
1206		/* Simple routing:
1207		 *   No source address - find interface with bdaddr != dst
1208		 *   Source address    - find interface with bdaddr == src
1209		 */
1210
1211		if (use_src) {
1212			bdaddr_t id_addr;
1213			u8 id_addr_type;
1214
1215			if (src_type == BDADDR_BREDR) {
1216				if (!lmp_bredr_capable(d))
1217					continue;
1218				bacpy(&id_addr, &d->bdaddr);
1219				id_addr_type = BDADDR_BREDR;
1220			} else {
1221				if (!lmp_le_capable(d))
1222					continue;
1223
1224				hci_copy_identity_address(d, &id_addr,
1225							  &id_addr_type);
1226
1227				/* Convert from HCI to three-value type */
1228				if (id_addr_type == ADDR_LE_DEV_PUBLIC)
1229					id_addr_type = BDADDR_LE_PUBLIC;
1230				else
1231					id_addr_type = BDADDR_LE_RANDOM;
1232			}
1233
1234			if (!bacmp(&id_addr, src) && id_addr_type == src_type) {
1235				hdev = d; break;
1236			}
1237		} else {
1238			if (bacmp(&d->bdaddr, dst)) {
1239				hdev = d; break;
1240			}
1241		}
1242	}
1243
1244	if (hdev)
1245		hdev = hci_dev_hold(hdev);
1246
1247	read_unlock(&hci_dev_list_lock);
1248	return hdev;
1249}
1250EXPORT_SYMBOL(hci_get_route);
1251
1252/* This function requires the caller holds hdev->lock */
1253static void hci_le_conn_failed(struct hci_conn *conn, u8 status)
1254{
1255	struct hci_dev *hdev = conn->hdev;
 
 
 
 
 
 
 
 
 
1256
1257	hci_connect_le_scan_cleanup(conn, status);
1258
1259	/* Enable advertising in case this was a failed connection
1260	 * attempt as a peripheral.
 
 
 
1261	 */
1262	hci_enable_advertising(hdev);
1263}
 
 
1264
1265/* This function requires the caller holds hdev->lock */
1266void hci_conn_failed(struct hci_conn *conn, u8 status)
1267{
1268	struct hci_dev *hdev = conn->hdev;
1269
1270	bt_dev_dbg(hdev, "status 0x%2.2x", status);
1271
1272	switch (conn->type) {
1273	case LE_LINK:
1274		hci_le_conn_failed(conn, status);
1275		break;
1276	case ACL_LINK:
1277		mgmt_connect_failed(hdev, &conn->dst, conn->type,
1278				    conn->dst_type, status);
1279		break;
1280	}
1281
1282	/* In case of BIG/PA sync failed, clear conn flags so that
1283	 * the conns will be correctly cleaned up by ISO layer
1284	 */
1285	test_and_clear_bit(HCI_CONN_BIG_SYNC_FAILED, &conn->flags);
1286	test_and_clear_bit(HCI_CONN_PA_SYNC_FAILED, &conn->flags);
1287
1288	conn->state = BT_CLOSED;
1289	hci_connect_cfm(conn, status);
1290	hci_conn_del(conn);
 
1291}
1292
1293/* This function requires the caller holds hdev->lock */
1294u8 hci_conn_set_handle(struct hci_conn *conn, u16 handle)
1295{
1296	struct hci_dev *hdev = conn->hdev;
1297
1298	bt_dev_dbg(hdev, "hcon %p handle 0x%4.4x", conn, handle);
1299
1300	if (conn->handle == handle)
1301		return 0;
 
 
1302
1303	if (handle > HCI_CONN_HANDLE_MAX) {
1304		bt_dev_err(hdev, "Invalid handle: 0x%4.4x > 0x%4.4x",
1305			   handle, HCI_CONN_HANDLE_MAX);
1306		return HCI_ERROR_INVALID_PARAMETERS;
1307	}
1308
1309	/* If abort_reason has been sent it means the connection is being
1310	 * aborted and the handle shall not be changed.
1311	 */
1312	if (conn->abort_reason)
1313		return conn->abort_reason;
1314
1315	if (HCI_CONN_HANDLE_UNSET(conn->handle))
1316		ida_free(&hdev->unset_handle_ida, conn->handle);
1317
1318	conn->handle = handle;
1319
1320	return 0;
 
1321}
1322
1323static void create_le_conn_complete(struct hci_dev *hdev, void *data, int err)
1324{
1325	struct hci_conn *conn;
1326	u16 handle = PTR_UINT(data);
1327
1328	conn = hci_conn_hash_lookup_handle(hdev, handle);
1329	if (!conn)
1330		return;
1331
1332	bt_dev_dbg(hdev, "err %d", err);
 
 
 
1333
1334	hci_dev_lock(hdev);
1335
1336	if (!err) {
1337		hci_connect_le_scan_cleanup(conn, 0x00);
1338		goto done;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1339	}
1340
1341	/* Check if connection is still pending */
1342	if (conn != hci_lookup_le_connect(hdev))
1343		goto done;
 
 
1344
1345	/* Flush to make sure we send create conn cancel command if needed */
1346	flush_delayed_work(&conn->le_conn_timeout);
1347	hci_conn_failed(conn, bt_status(err));
1348
1349done:
1350	hci_dev_unlock(hdev);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1351}
1352
1353static int hci_connect_le_sync(struct hci_dev *hdev, void *data)
 
1354{
1355	struct hci_conn *conn;
1356	u16 handle = PTR_UINT(data);
 
1357
1358	conn = hci_conn_hash_lookup_handle(hdev, handle);
1359	if (!conn)
1360		return 0;
1361
1362	bt_dev_dbg(hdev, "conn %p", conn);
 
 
 
 
 
1363
1364	clear_bit(HCI_CONN_SCANNING, &conn->flags);
1365	conn->state = BT_CONNECT;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1366
1367	return hci_le_create_conn_sync(hdev, conn);
1368}
1369
1370struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
1371				u8 dst_type, bool dst_resolved, u8 sec_level,
1372				u16 conn_timeout, u8 role)
1373{
 
1374	struct hci_conn *conn;
1375	struct smp_irk *irk;
 
1376	int err;
1377
 
 
 
 
 
1378	/* Let's make sure that le is enabled.*/
1379	if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
1380		if (lmp_le_capable(hdev))
1381			return ERR_PTR(-ECONNREFUSED);
1382
1383		return ERR_PTR(-EOPNOTSUPP);
1384	}
1385
1386	/* Since the controller supports only one LE connection attempt at a
1387	 * time, we return -EBUSY if there is any connection attempt running.
1388	 */
1389	if (hci_lookup_le_connect(hdev))
1390		return ERR_PTR(-EBUSY);
1391
1392	/* If there's already a connection object but it's not in
1393	 * scanning state it means it must already be established, in
1394	 * which case we can't do anything else except report a failure
1395	 * to connect.
1396	 */
1397	conn = hci_conn_hash_lookup_le(hdev, dst, dst_type);
1398	if (conn && !test_bit(HCI_CONN_SCANNING, &conn->flags)) {
1399		return ERR_PTR(-EBUSY);
1400	}
1401
1402	/* Check if the destination address has been resolved by the controller
1403	 * since if it did then the identity address shall be used.
1404	 */
1405	if (!dst_resolved) {
1406		/* When given an identity address with existing identity
1407		 * resolving key, the connection needs to be established
1408		 * to a resolvable random address.
1409		 *
1410		 * Storing the resolvable random address is required here
1411		 * to handle connection failures. The address will later
1412		 * be resolved back into the original identity address
1413		 * from the connect request.
1414		 */
1415		irk = hci_find_irk_by_addr(hdev, dst, dst_type);
1416		if (irk && bacmp(&irk->rpa, BDADDR_ANY)) {
1417			dst = &irk->rpa;
1418			dst_type = ADDR_LE_DEV_RANDOM;
1419		}
1420	}
1421
1422	if (conn) {
1423		bacpy(&conn->dst, dst);
1424	} else {
1425		conn = hci_conn_add_unset(hdev, LE_LINK, dst, role);
1426		if (!conn)
1427			return ERR_PTR(-ENOMEM);
1428		hci_conn_hold(conn);
1429		conn->pending_sec_level = sec_level;
1430	}
1431
1432	conn->dst_type = dst_type;
1433	conn->sec_level = BT_SECURITY_LOW;
1434	conn->conn_timeout = conn_timeout;
1435
1436	err = hci_cmd_sync_queue(hdev, hci_connect_le_sync,
1437				 UINT_PTR(conn->handle),
1438				 create_le_conn_complete);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1439	if (err) {
1440		hci_conn_del(conn);
 
 
 
 
1441		return ERR_PTR(err);
1442	}
1443
1444	return conn;
1445}
1446
1447static bool is_connected(struct hci_dev *hdev, bdaddr_t *addr, u8 type)
1448{
1449	struct hci_conn *conn;
1450
1451	conn = hci_conn_hash_lookup_le(hdev, addr, type);
1452	if (!conn)
1453		return false;
1454
1455	if (conn->state != BT_CONNECTED)
1456		return false;
1457
1458	return true;
1459}
1460
1461/* This function requires the caller holds hdev->lock */
1462static int hci_explicit_conn_params_set(struct hci_dev *hdev,
1463					bdaddr_t *addr, u8 addr_type)
1464{
1465	struct hci_conn_params *params;
1466
1467	if (is_connected(hdev, addr, addr_type))
1468		return -EISCONN;
1469
1470	params = hci_conn_params_lookup(hdev, addr, addr_type);
1471	if (!params) {
1472		params = hci_conn_params_add(hdev, addr, addr_type);
1473		if (!params)
1474			return -ENOMEM;
1475
1476		/* If we created new params, mark them to be deleted in
1477		 * hci_connect_le_scan_cleanup. It's different case than
1478		 * existing disabled params, those will stay after cleanup.
1479		 */
1480		params->auto_connect = HCI_AUTO_CONN_EXPLICIT;
1481	}
1482
1483	/* We're trying to connect, so make sure params are at pend_le_conns */
1484	if (params->auto_connect == HCI_AUTO_CONN_DISABLED ||
1485	    params->auto_connect == HCI_AUTO_CONN_REPORT ||
1486	    params->auto_connect == HCI_AUTO_CONN_EXPLICIT) {
1487		hci_pend_le_list_del_init(params);
1488		hci_pend_le_list_add(params, &hdev->pend_le_conns);
1489	}
1490
1491	params->explicit_connect = true;
1492
1493	BT_DBG("addr %pMR (type %u) auto_connect %u", addr, addr_type,
1494	       params->auto_connect);
1495
1496	return 0;
1497}
1498
1499static int qos_set_big(struct hci_dev *hdev, struct bt_iso_qos *qos)
1500{
1501	struct hci_conn *conn;
1502	u8  big;
1503
1504	/* Allocate a BIG if not set */
1505	if (qos->bcast.big == BT_ISO_QOS_BIG_UNSET) {
1506		for (big = 0x00; big < 0xef; big++) {
1507
1508			conn = hci_conn_hash_lookup_big(hdev, big);
1509			if (!conn)
1510				break;
1511		}
1512
1513		if (big == 0xef)
1514			return -EADDRNOTAVAIL;
1515
1516		/* Update BIG */
1517		qos->bcast.big = big;
1518	}
1519
1520	return 0;
1521}
1522
1523static int qos_set_bis(struct hci_dev *hdev, struct bt_iso_qos *qos)
1524{
1525	struct hci_conn *conn;
1526	u8  bis;
1527
1528	/* Allocate BIS if not set */
1529	if (qos->bcast.bis == BT_ISO_QOS_BIS_UNSET) {
1530		if (qos->bcast.big != BT_ISO_QOS_BIG_UNSET) {
1531			conn = hci_conn_hash_lookup_big(hdev, qos->bcast.big);
1532
1533			if (conn) {
1534				/* If the BIG handle is already matched to an advertising
1535				 * handle, do not allocate a new one.
1536				 */
1537				qos->bcast.bis = conn->iso_qos.bcast.bis;
1538				return 0;
1539			}
1540		}
1541
1542		/* Find an unused adv set to advertise BIS, skip instance 0x00
1543		 * since it is reserved as general purpose set.
1544		 */
1545		for (bis = 0x01; bis < hdev->le_num_of_adv_sets;
1546		     bis++) {
1547
1548			conn = hci_conn_hash_lookup_bis(hdev, BDADDR_ANY, bis);
1549			if (!conn)
1550				break;
1551		}
1552
1553		if (bis == hdev->le_num_of_adv_sets)
1554			return -EADDRNOTAVAIL;
1555
1556		/* Update BIS */
1557		qos->bcast.bis = bis;
1558	}
1559
1560	return 0;
1561}
1562
1563/* This function requires the caller holds hdev->lock */
1564static struct hci_conn *hci_add_bis(struct hci_dev *hdev, bdaddr_t *dst,
1565				    struct bt_iso_qos *qos, __u8 base_len,
1566				    __u8 *base)
1567{
1568	struct hci_conn *conn;
1569	int err;
1570
1571	/* Let's make sure that le is enabled.*/
1572	if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
1573		if (lmp_le_capable(hdev))
1574			return ERR_PTR(-ECONNREFUSED);
1575		return ERR_PTR(-EOPNOTSUPP);
1576	}
1577
1578	err = qos_set_big(hdev, qos);
1579	if (err)
1580		return ERR_PTR(err);
1581
1582	err = qos_set_bis(hdev, qos);
1583	if (err)
1584		return ERR_PTR(err);
1585
1586	/* Check if the LE Create BIG command has already been sent */
1587	conn = hci_conn_hash_lookup_per_adv_bis(hdev, dst, qos->bcast.big,
1588						qos->bcast.big);
1589	if (conn)
1590		return ERR_PTR(-EADDRINUSE);
1591
1592	/* Check BIS settings against other bound BISes, since all
1593	 * BISes in a BIG must have the same value for all parameters
1594	 */
1595	conn = hci_conn_hash_lookup_big(hdev, qos->bcast.big);
1596
1597	if (conn && (memcmp(qos, &conn->iso_qos, sizeof(*qos)) ||
1598		     base_len != conn->le_per_adv_data_len ||
1599		     memcmp(conn->le_per_adv_data, base, base_len)))
1600		return ERR_PTR(-EADDRINUSE);
1601
1602	conn = hci_conn_add_unset(hdev, ISO_LINK, dst, HCI_ROLE_MASTER);
1603	if (!conn)
1604		return ERR_PTR(-ENOMEM);
1605
1606	conn->state = BT_CONNECT;
1607
1608	hci_conn_hold(conn);
1609	return conn;
1610}
1611
1612/* This function requires the caller holds hdev->lock */
1613struct hci_conn *hci_connect_le_scan(struct hci_dev *hdev, bdaddr_t *dst,
1614				     u8 dst_type, u8 sec_level,
1615				     u16 conn_timeout,
1616				     enum conn_reasons conn_reason)
1617{
1618	struct hci_conn *conn;
1619
1620	/* Let's make sure that le is enabled.*/
1621	if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
1622		if (lmp_le_capable(hdev))
1623			return ERR_PTR(-ECONNREFUSED);
1624
1625		return ERR_PTR(-EOPNOTSUPP);
1626	}
1627
1628	/* Some devices send ATT messages as soon as the physical link is
1629	 * established. To be able to handle these ATT messages, the user-
1630	 * space first establishes the connection and then starts the pairing
1631	 * process.
1632	 *
1633	 * So if a hci_conn object already exists for the following connection
1634	 * attempt, we simply update pending_sec_level and auth_type fields
1635	 * and return the object found.
1636	 */
1637	conn = hci_conn_hash_lookup_le(hdev, dst, dst_type);
1638	if (conn) {
1639		if (conn->pending_sec_level < sec_level)
1640			conn->pending_sec_level = sec_level;
1641		goto done;
1642	}
1643
1644	BT_DBG("requesting refresh of dst_addr");
1645
1646	conn = hci_conn_add_unset(hdev, LE_LINK, dst, HCI_ROLE_MASTER);
1647	if (!conn)
1648		return ERR_PTR(-ENOMEM);
1649
1650	if (hci_explicit_conn_params_set(hdev, dst, dst_type) < 0) {
1651		hci_conn_del(conn);
1652		return ERR_PTR(-EBUSY);
1653	}
1654
1655	conn->state = BT_CONNECT;
1656	set_bit(HCI_CONN_SCANNING, &conn->flags);
1657	conn->dst_type = dst_type;
1658	conn->sec_level = BT_SECURITY_LOW;
1659	conn->pending_sec_level = sec_level;
1660	conn->conn_timeout = conn_timeout;
1661	conn->conn_reason = conn_reason;
1662
1663	hci_update_passive_scan(hdev);
1664
1665done:
1666	hci_conn_hold(conn);
1667	return conn;
1668}
1669
1670struct hci_conn *hci_connect_acl(struct hci_dev *hdev, bdaddr_t *dst,
1671				 u8 sec_level, u8 auth_type,
1672				 enum conn_reasons conn_reason)
1673{
1674	struct hci_conn *acl;
1675
1676	if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) {
1677		if (lmp_bredr_capable(hdev))
1678			return ERR_PTR(-ECONNREFUSED);
1679
1680		return ERR_PTR(-EOPNOTSUPP);
1681	}
1682
1683	/* Reject outgoing connection to device with same BD ADDR against
1684	 * CVE-2020-26555
1685	 */
1686	if (!bacmp(&hdev->bdaddr, dst)) {
1687		bt_dev_dbg(hdev, "Reject connection with same BD_ADDR %pMR\n",
1688			   dst);
1689		return ERR_PTR(-ECONNREFUSED);
1690	}
1691
1692	acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst);
1693	if (!acl) {
1694		acl = hci_conn_add_unset(hdev, ACL_LINK, dst, HCI_ROLE_MASTER);
1695		if (!acl)
1696			return ERR_PTR(-ENOMEM);
1697	}
1698
1699	hci_conn_hold(acl);
1700
1701	acl->conn_reason = conn_reason;
1702	if (acl->state == BT_OPEN || acl->state == BT_CLOSED) {
1703		acl->sec_level = BT_SECURITY_LOW;
1704		acl->pending_sec_level = sec_level;
1705		acl->auth_type = auth_type;
1706		hci_acl_create_connection(acl);
1707	}
1708
1709	return acl;
1710}
1711
1712static struct hci_link *hci_conn_link(struct hci_conn *parent,
1713				      struct hci_conn *conn)
1714{
1715	struct hci_dev *hdev = parent->hdev;
1716	struct hci_link *link;
1717
1718	bt_dev_dbg(hdev, "parent %p hcon %p", parent, conn);
1719
1720	if (conn->link)
1721		return conn->link;
1722
1723	if (conn->parent)
1724		return NULL;
1725
1726	link = kzalloc(sizeof(*link), GFP_KERNEL);
1727	if (!link)
1728		return NULL;
1729
1730	link->conn = hci_conn_hold(conn);
1731	conn->link = link;
1732	conn->parent = hci_conn_get(parent);
1733
1734	/* Use list_add_tail_rcu append to the list */
1735	list_add_tail_rcu(&link->list, &parent->link_list);
1736
1737	return link;
1738}
1739
1740struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst,
1741				 __u16 setting, struct bt_codec *codec)
1742{
1743	struct hci_conn *acl;
1744	struct hci_conn *sco;
1745	struct hci_link *link;
1746
1747	acl = hci_connect_acl(hdev, dst, BT_SECURITY_LOW, HCI_AT_NO_BONDING,
1748			      CONN_REASON_SCO_CONNECT);
1749	if (IS_ERR(acl))
1750		return acl;
1751
1752	sco = hci_conn_hash_lookup_ba(hdev, type, dst);
1753	if (!sco) {
1754		sco = hci_conn_add_unset(hdev, type, dst, HCI_ROLE_MASTER);
1755		if (!sco) {
1756			hci_conn_drop(acl);
1757			return ERR_PTR(-ENOMEM);
1758		}
1759	}
1760
1761	link = hci_conn_link(acl, sco);
1762	if (!link) {
1763		hci_conn_drop(acl);
1764		hci_conn_drop(sco);
1765		return ERR_PTR(-ENOLINK);
1766	}
1767
1768	sco->setting = setting;
1769	sco->codec = *codec;
1770
1771	if (acl->state == BT_CONNECTED &&
1772	    (sco->state == BT_OPEN || sco->state == BT_CLOSED)) {
1773		set_bit(HCI_CONN_POWER_SAVE, &acl->flags);
1774		hci_conn_enter_active_mode(acl, BT_POWER_FORCE_ACTIVE_ON);
1775
1776		if (test_bit(HCI_CONN_MODE_CHANGE_PEND, &acl->flags)) {
1777			/* defer SCO setup until mode change completed */
1778			set_bit(HCI_CONN_SCO_SETUP_PEND, &acl->flags);
1779			return sco;
1780		}
1781
1782		hci_sco_setup(acl, 0x00);
1783	}
1784
1785	return sco;
1786}
1787
1788static int hci_le_create_big(struct hci_conn *conn, struct bt_iso_qos *qos)
1789{
1790	struct hci_dev *hdev = conn->hdev;
1791	struct hci_cp_le_create_big cp;
1792	struct iso_list_data data;
1793
1794	memset(&cp, 0, sizeof(cp));
1795
1796	data.big = qos->bcast.big;
1797	data.bis = qos->bcast.bis;
1798	data.count = 0;
1799
1800	/* Create a BIS for each bound connection */
1801	hci_conn_hash_list_state(hdev, bis_list, ISO_LINK,
1802				 BT_BOUND, &data);
1803
1804	cp.handle = qos->bcast.big;
1805	cp.adv_handle = qos->bcast.bis;
1806	cp.num_bis  = data.count;
1807	hci_cpu_to_le24(qos->bcast.out.interval, cp.bis.sdu_interval);
1808	cp.bis.sdu = cpu_to_le16(qos->bcast.out.sdu);
1809	cp.bis.latency =  cpu_to_le16(qos->bcast.out.latency);
1810	cp.bis.rtn  = qos->bcast.out.rtn;
1811	cp.bis.phy  = qos->bcast.out.phy;
1812	cp.bis.packing = qos->bcast.packing;
1813	cp.bis.framing = qos->bcast.framing;
1814	cp.bis.encryption = qos->bcast.encryption;
1815	memcpy(cp.bis.bcode, qos->bcast.bcode, sizeof(cp.bis.bcode));
1816
1817	return hci_send_cmd(hdev, HCI_OP_LE_CREATE_BIG, sizeof(cp), &cp);
1818}
1819
1820static int set_cig_params_sync(struct hci_dev *hdev, void *data)
1821{
1822	u8 cig_id = PTR_UINT(data);
1823	struct hci_conn *conn;
1824	struct bt_iso_qos *qos;
1825	struct iso_cig_params pdu;
1826	u8 cis_id;
1827
1828	conn = hci_conn_hash_lookup_cig(hdev, cig_id);
1829	if (!conn)
1830		return 0;
1831
1832	memset(&pdu, 0, sizeof(pdu));
1833
1834	qos = &conn->iso_qos;
1835	pdu.cp.cig_id = cig_id;
1836	hci_cpu_to_le24(qos->ucast.out.interval, pdu.cp.c_interval);
1837	hci_cpu_to_le24(qos->ucast.in.interval, pdu.cp.p_interval);
1838	pdu.cp.sca = qos->ucast.sca;
1839	pdu.cp.packing = qos->ucast.packing;
1840	pdu.cp.framing = qos->ucast.framing;
1841	pdu.cp.c_latency = cpu_to_le16(qos->ucast.out.latency);
1842	pdu.cp.p_latency = cpu_to_le16(qos->ucast.in.latency);
1843
1844	/* Reprogram all CIS(s) with the same CIG, valid range are:
1845	 * num_cis: 0x00 to 0x1F
1846	 * cis_id: 0x00 to 0xEF
1847	 */
1848	for (cis_id = 0x00; cis_id < 0xf0 &&
1849	     pdu.cp.num_cis < ARRAY_SIZE(pdu.cis); cis_id++) {
1850		struct hci_cis_params *cis;
1851
1852		conn = hci_conn_hash_lookup_cis(hdev, NULL, 0, cig_id, cis_id);
1853		if (!conn)
1854			continue;
1855
1856		qos = &conn->iso_qos;
1857
1858		cis = &pdu.cis[pdu.cp.num_cis++];
1859		cis->cis_id = cis_id;
1860		cis->c_sdu  = cpu_to_le16(conn->iso_qos.ucast.out.sdu);
1861		cis->p_sdu  = cpu_to_le16(conn->iso_qos.ucast.in.sdu);
1862		cis->c_phy  = qos->ucast.out.phy ? qos->ucast.out.phy :
1863			      qos->ucast.in.phy;
1864		cis->p_phy  = qos->ucast.in.phy ? qos->ucast.in.phy :
1865			      qos->ucast.out.phy;
1866		cis->c_rtn  = qos->ucast.out.rtn;
1867		cis->p_rtn  = qos->ucast.in.rtn;
1868	}
1869
1870	if (!pdu.cp.num_cis)
1871		return 0;
1872
1873	return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_CIG_PARAMS,
1874				     sizeof(pdu.cp) +
1875				     pdu.cp.num_cis * sizeof(pdu.cis[0]), &pdu,
1876				     HCI_CMD_TIMEOUT);
1877}
1878
1879static bool hci_le_set_cig_params(struct hci_conn *conn, struct bt_iso_qos *qos)
1880{
1881	struct hci_dev *hdev = conn->hdev;
1882	struct iso_list_data data;
1883
1884	memset(&data, 0, sizeof(data));
1885
1886	/* Allocate first still reconfigurable CIG if not set */
1887	if (qos->ucast.cig == BT_ISO_QOS_CIG_UNSET) {
1888		for (data.cig = 0x00; data.cig < 0xf0; data.cig++) {
1889			data.count = 0;
1890
1891			hci_conn_hash_list_state(hdev, find_cis, ISO_LINK,
1892						 BT_CONNECT, &data);
1893			if (data.count)
1894				continue;
1895
1896			hci_conn_hash_list_state(hdev, find_cis, ISO_LINK,
1897						 BT_CONNECTED, &data);
1898			if (!data.count)
1899				break;
1900		}
1901
1902		if (data.cig == 0xf0)
1903			return false;
1904
1905		/* Update CIG */
1906		qos->ucast.cig = data.cig;
1907	}
1908
1909	if (qos->ucast.cis != BT_ISO_QOS_CIS_UNSET) {
1910		if (hci_conn_hash_lookup_cis(hdev, NULL, 0, qos->ucast.cig,
1911					     qos->ucast.cis))
1912			return false;
1913		goto done;
1914	}
1915
1916	/* Allocate first available CIS if not set */
1917	for (data.cig = qos->ucast.cig, data.cis = 0x00; data.cis < 0xf0;
1918	     data.cis++) {
1919		if (!hci_conn_hash_lookup_cis(hdev, NULL, 0, data.cig,
1920					      data.cis)) {
1921			/* Update CIS */
1922			qos->ucast.cis = data.cis;
1923			break;
1924		}
1925	}
1926
1927	if (qos->ucast.cis == BT_ISO_QOS_CIS_UNSET)
1928		return false;
1929
1930done:
1931	if (hci_cmd_sync_queue(hdev, set_cig_params_sync,
1932			       UINT_PTR(qos->ucast.cig), NULL) < 0)
1933		return false;
1934
1935	return true;
1936}
1937
1938struct hci_conn *hci_bind_cis(struct hci_dev *hdev, bdaddr_t *dst,
1939			      __u8 dst_type, struct bt_iso_qos *qos)
1940{
1941	struct hci_conn *cis;
1942
1943	cis = hci_conn_hash_lookup_cis(hdev, dst, dst_type, qos->ucast.cig,
1944				       qos->ucast.cis);
1945	if (!cis) {
1946		cis = hci_conn_add_unset(hdev, ISO_LINK, dst, HCI_ROLE_MASTER);
1947		if (!cis)
1948			return ERR_PTR(-ENOMEM);
1949		cis->cleanup = cis_cleanup;
1950		cis->dst_type = dst_type;
1951		cis->iso_qos.ucast.cig = BT_ISO_QOS_CIG_UNSET;
1952		cis->iso_qos.ucast.cis = BT_ISO_QOS_CIS_UNSET;
1953	}
1954
1955	if (cis->state == BT_CONNECTED)
1956		return cis;
1957
1958	/* Check if CIS has been set and the settings matches */
1959	if (cis->state == BT_BOUND &&
1960	    !memcmp(&cis->iso_qos, qos, sizeof(*qos)))
1961		return cis;
1962
1963	/* Update LINK PHYs according to QoS preference */
1964	cis->le_tx_phy = qos->ucast.out.phy;
1965	cis->le_rx_phy = qos->ucast.in.phy;
1966
1967	/* If output interval is not set use the input interval as it cannot be
1968	 * 0x000000.
1969	 */
1970	if (!qos->ucast.out.interval)
1971		qos->ucast.out.interval = qos->ucast.in.interval;
1972
1973	/* If input interval is not set use the output interval as it cannot be
1974	 * 0x000000.
1975	 */
1976	if (!qos->ucast.in.interval)
1977		qos->ucast.in.interval = qos->ucast.out.interval;
1978
1979	/* If output latency is not set use the input latency as it cannot be
1980	 * 0x0000.
1981	 */
1982	if (!qos->ucast.out.latency)
1983		qos->ucast.out.latency = qos->ucast.in.latency;
1984
1985	/* If input latency is not set use the output latency as it cannot be
1986	 * 0x0000.
1987	 */
1988	if (!qos->ucast.in.latency)
1989		qos->ucast.in.latency = qos->ucast.out.latency;
1990
1991	if (!hci_le_set_cig_params(cis, qos)) {
1992		hci_conn_drop(cis);
1993		return ERR_PTR(-EINVAL);
1994	}
1995
1996	hci_conn_hold(cis);
1997
1998	cis->iso_qos = *qos;
1999	cis->state = BT_BOUND;
2000
2001	return cis;
2002}
2003
2004bool hci_iso_setup_path(struct hci_conn *conn)
2005{
2006	struct hci_dev *hdev = conn->hdev;
2007	struct hci_cp_le_setup_iso_path cmd;
2008
2009	memset(&cmd, 0, sizeof(cmd));
2010
2011	if (conn->iso_qos.ucast.out.sdu) {
2012		cmd.handle = cpu_to_le16(conn->handle);
2013		cmd.direction = 0x00; /* Input (Host to Controller) */
2014		cmd.path = 0x00; /* HCI path if enabled */
2015		cmd.codec = 0x03; /* Transparent Data */
2016
2017		if (hci_send_cmd(hdev, HCI_OP_LE_SETUP_ISO_PATH, sizeof(cmd),
2018				 &cmd) < 0)
2019			return false;
2020	}
2021
2022	if (conn->iso_qos.ucast.in.sdu) {
2023		cmd.handle = cpu_to_le16(conn->handle);
2024		cmd.direction = 0x01; /* Output (Controller to Host) */
2025		cmd.path = 0x00; /* HCI path if enabled */
2026		cmd.codec = 0x03; /* Transparent Data */
2027
2028		if (hci_send_cmd(hdev, HCI_OP_LE_SETUP_ISO_PATH, sizeof(cmd),
2029				 &cmd) < 0)
2030			return false;
2031	}
2032
2033	return true;
2034}
2035
2036int hci_conn_check_create_cis(struct hci_conn *conn)
2037{
2038	if (conn->type != ISO_LINK || !bacmp(&conn->dst, BDADDR_ANY))
2039		return -EINVAL;
2040
2041	if (!conn->parent || conn->parent->state != BT_CONNECTED ||
2042	    conn->state != BT_CONNECT || HCI_CONN_HANDLE_UNSET(conn->handle))
2043		return 1;
2044
2045	return 0;
2046}
2047
2048static int hci_create_cis_sync(struct hci_dev *hdev, void *data)
2049{
2050	return hci_le_create_cis_sync(hdev);
2051}
2052
2053int hci_le_create_cis_pending(struct hci_dev *hdev)
2054{
2055	struct hci_conn *conn;
2056	bool pending = false;
2057
2058	rcu_read_lock();
2059
2060	list_for_each_entry_rcu(conn, &hdev->conn_hash.list, list) {
2061		if (test_bit(HCI_CONN_CREATE_CIS, &conn->flags)) {
2062			rcu_read_unlock();
2063			return -EBUSY;
2064		}
2065
2066		if (!hci_conn_check_create_cis(conn))
2067			pending = true;
2068	}
2069
2070	rcu_read_unlock();
2071
2072	if (!pending)
2073		return 0;
2074
2075	/* Queue Create CIS */
2076	return hci_cmd_sync_queue(hdev, hci_create_cis_sync, NULL, NULL);
2077}
2078
2079static void hci_iso_qos_setup(struct hci_dev *hdev, struct hci_conn *conn,
2080			      struct bt_iso_io_qos *qos, __u8 phy)
2081{
2082	/* Only set MTU if PHY is enabled */
2083	if (!qos->sdu && qos->phy) {
2084		if (hdev->iso_mtu > 0)
2085			qos->sdu = hdev->iso_mtu;
2086		else if (hdev->le_mtu > 0)
2087			qos->sdu = hdev->le_mtu;
2088		else
2089			qos->sdu = hdev->acl_mtu;
2090	}
2091
2092	/* Use the same PHY as ACL if set to any */
2093	if (qos->phy == BT_ISO_PHY_ANY)
2094		qos->phy = phy;
2095
2096	/* Use LE ACL connection interval if not set */
2097	if (!qos->interval)
2098		/* ACL interval unit in 1.25 ms to us */
2099		qos->interval = conn->le_conn_interval * 1250;
2100
2101	/* Use LE ACL connection latency if not set */
2102	if (!qos->latency)
2103		qos->latency = conn->le_conn_latency;
2104}
2105
2106static int create_big_sync(struct hci_dev *hdev, void *data)
2107{
2108	struct hci_conn *conn = data;
2109	struct bt_iso_qos *qos = &conn->iso_qos;
2110	u16 interval, sync_interval = 0;
2111	u32 flags = 0;
2112	int err;
2113
2114	if (qos->bcast.out.phy == 0x02)
2115		flags |= MGMT_ADV_FLAG_SEC_2M;
2116
2117	/* Align intervals */
2118	interval = (qos->bcast.out.interval / 1250) * qos->bcast.sync_factor;
2119
2120	if (qos->bcast.bis)
2121		sync_interval = interval * 4;
2122
2123	err = hci_start_per_adv_sync(hdev, qos->bcast.bis, conn->le_per_adv_data_len,
2124				     conn->le_per_adv_data, flags, interval,
2125				     interval, sync_interval);
2126	if (err)
2127		return err;
2128
2129	return hci_le_create_big(conn, &conn->iso_qos);
2130}
2131
2132static void create_pa_complete(struct hci_dev *hdev, void *data, int err)
2133{
2134	struct hci_cp_le_pa_create_sync *cp = data;
2135
2136	bt_dev_dbg(hdev, "");
2137
2138	if (err)
2139		bt_dev_err(hdev, "Unable to create PA: %d", err);
2140
2141	kfree(cp);
2142}
2143
2144static int create_pa_sync(struct hci_dev *hdev, void *data)
2145{
2146	struct hci_cp_le_pa_create_sync *cp = data;
2147	int err;
2148
2149	err = __hci_cmd_sync_status(hdev, HCI_OP_LE_PA_CREATE_SYNC,
2150				    sizeof(*cp), cp, HCI_CMD_TIMEOUT);
2151	if (err) {
2152		hci_dev_clear_flag(hdev, HCI_PA_SYNC);
2153		return err;
2154	}
2155
2156	return hci_update_passive_scan_sync(hdev);
2157}
2158
2159int hci_pa_create_sync(struct hci_dev *hdev, bdaddr_t *dst, __u8 dst_type,
2160		       __u8 sid, struct bt_iso_qos *qos)
2161{
2162	struct hci_cp_le_pa_create_sync *cp;
2163
2164	if (hci_dev_test_and_set_flag(hdev, HCI_PA_SYNC))
2165		return -EBUSY;
2166
2167	cp = kzalloc(sizeof(*cp), GFP_KERNEL);
2168	if (!cp) {
2169		hci_dev_clear_flag(hdev, HCI_PA_SYNC);
2170		return -ENOMEM;
2171	}
2172
2173	cp->options = qos->bcast.options;
2174	cp->sid = sid;
2175	cp->addr_type = dst_type;
2176	bacpy(&cp->addr, dst);
2177	cp->skip = cpu_to_le16(qos->bcast.skip);
2178	cp->sync_timeout = cpu_to_le16(qos->bcast.sync_timeout);
2179	cp->sync_cte_type = qos->bcast.sync_cte_type;
2180
2181	/* Queue start pa_create_sync and scan */
2182	return hci_cmd_sync_queue(hdev, create_pa_sync, cp, create_pa_complete);
2183}
2184
2185int hci_le_big_create_sync(struct hci_dev *hdev, struct hci_conn *hcon,
2186			   struct bt_iso_qos *qos,
2187			   __u16 sync_handle, __u8 num_bis, __u8 bis[])
2188{
2189	struct _packed {
2190		struct hci_cp_le_big_create_sync cp;
2191		__u8  bis[0x11];
2192	} pdu;
2193	int err;
2194
2195	if (num_bis < 0x01 || num_bis > sizeof(pdu.bis))
2196		return -EINVAL;
2197
2198	err = qos_set_big(hdev, qos);
2199	if (err)
2200		return err;
2201
2202	if (hcon)
2203		hcon->iso_qos.bcast.big = qos->bcast.big;
2204
2205	memset(&pdu, 0, sizeof(pdu));
2206	pdu.cp.handle = qos->bcast.big;
2207	pdu.cp.sync_handle = cpu_to_le16(sync_handle);
2208	pdu.cp.encryption = qos->bcast.encryption;
2209	memcpy(pdu.cp.bcode, qos->bcast.bcode, sizeof(pdu.cp.bcode));
2210	pdu.cp.mse = qos->bcast.mse;
2211	pdu.cp.timeout = cpu_to_le16(qos->bcast.timeout);
2212	pdu.cp.num_bis = num_bis;
2213	memcpy(pdu.bis, bis, num_bis);
2214
2215	return hci_send_cmd(hdev, HCI_OP_LE_BIG_CREATE_SYNC,
2216			    sizeof(pdu.cp) + num_bis, &pdu);
2217}
2218
2219static void create_big_complete(struct hci_dev *hdev, void *data, int err)
2220{
2221	struct hci_conn *conn = data;
2222
2223	bt_dev_dbg(hdev, "conn %p", conn);
2224
2225	if (err) {
2226		bt_dev_err(hdev, "Unable to create BIG: %d", err);
2227		hci_connect_cfm(conn, err);
2228		hci_conn_del(conn);
2229	}
2230}
2231
2232struct hci_conn *hci_bind_bis(struct hci_dev *hdev, bdaddr_t *dst,
2233			      struct bt_iso_qos *qos,
2234			      __u8 base_len, __u8 *base)
2235{
2236	struct hci_conn *conn;
2237	struct hci_conn *parent;
2238	__u8 eir[HCI_MAX_PER_AD_LENGTH];
2239	struct hci_link *link;
2240
2241	/* Look for any BIS that is open for rebinding */
2242	conn = hci_conn_hash_lookup_big_state(hdev, qos->bcast.big, BT_OPEN);
2243	if (conn) {
2244		memcpy(qos, &conn->iso_qos, sizeof(*qos));
2245		conn->state = BT_CONNECTED;
2246		return conn;
2247	}
2248
2249	if (base_len && base)
2250		base_len = eir_append_service_data(eir, 0,  0x1851,
2251						   base, base_len);
2252
2253	/* We need hci_conn object using the BDADDR_ANY as dst */
2254	conn = hci_add_bis(hdev, dst, qos, base_len, eir);
2255	if (IS_ERR(conn))
2256		return conn;
2257
2258	/* Update LINK PHYs according to QoS preference */
2259	conn->le_tx_phy = qos->bcast.out.phy;
2260	conn->le_tx_phy = qos->bcast.out.phy;
2261
2262	/* Add Basic Announcement into Peridic Adv Data if BASE is set */
2263	if (base_len && base) {
2264		memcpy(conn->le_per_adv_data,  eir, sizeof(eir));
2265		conn->le_per_adv_data_len = base_len;
2266	}
2267
2268	hci_iso_qos_setup(hdev, conn, &qos->bcast.out,
2269			  conn->le_tx_phy ? conn->le_tx_phy :
2270			  hdev->le_tx_def_phys);
2271
2272	conn->iso_qos = *qos;
2273	conn->state = BT_BOUND;
2274
2275	/* Link BISes together */
2276	parent = hci_conn_hash_lookup_big(hdev,
2277					  conn->iso_qos.bcast.big);
2278	if (parent && parent != conn) {
2279		link = hci_conn_link(parent, conn);
2280		if (!link) {
2281			hci_conn_drop(conn);
2282			return ERR_PTR(-ENOLINK);
2283		}
2284
2285		/* Link takes the refcount */
2286		hci_conn_drop(conn);
2287	}
2288
2289	return conn;
2290}
2291
2292static void bis_mark_per_adv(struct hci_conn *conn, void *data)
2293{
2294	struct iso_list_data *d = data;
2295
2296	/* Skip if not broadcast/ANY address */
2297	if (bacmp(&conn->dst, BDADDR_ANY))
2298		return;
2299
2300	if (d->big != conn->iso_qos.bcast.big ||
2301	    d->bis == BT_ISO_QOS_BIS_UNSET ||
2302	    d->bis != conn->iso_qos.bcast.bis)
2303		return;
2304
2305	set_bit(HCI_CONN_PER_ADV, &conn->flags);
2306}
2307
2308struct hci_conn *hci_connect_bis(struct hci_dev *hdev, bdaddr_t *dst,
2309				 __u8 dst_type, struct bt_iso_qos *qos,
2310				 __u8 base_len, __u8 *base)
2311{
2312	struct hci_conn *conn;
2313	int err;
2314	struct iso_list_data data;
2315
2316	conn = hci_bind_bis(hdev, dst, qos, base_len, base);
2317	if (IS_ERR(conn))
2318		return conn;
2319
2320	if (conn->state == BT_CONNECTED)
2321		return conn;
2322
2323	data.big = qos->bcast.big;
2324	data.bis = qos->bcast.bis;
2325
2326	/* Set HCI_CONN_PER_ADV for all bound connections, to mark that
2327	 * the start periodic advertising and create BIG commands have
2328	 * been queued
2329	 */
2330	hci_conn_hash_list_state(hdev, bis_mark_per_adv, ISO_LINK,
2331				 BT_BOUND, &data);
2332
2333	/* Queue start periodic advertising and create BIG */
2334	err = hci_cmd_sync_queue(hdev, create_big_sync, conn,
2335				 create_big_complete);
2336	if (err < 0) {
2337		hci_conn_drop(conn);
2338		return ERR_PTR(err);
2339	}
2340
2341	return conn;
2342}
2343
2344struct hci_conn *hci_connect_cis(struct hci_dev *hdev, bdaddr_t *dst,
2345				 __u8 dst_type, struct bt_iso_qos *qos)
2346{
2347	struct hci_conn *le;
2348	struct hci_conn *cis;
2349	struct hci_link *link;
2350
2351	if (hci_dev_test_flag(hdev, HCI_ADVERTISING))
2352		le = hci_connect_le(hdev, dst, dst_type, false,
2353				    BT_SECURITY_LOW,
2354				    HCI_LE_CONN_TIMEOUT,
2355				    HCI_ROLE_SLAVE);
2356	else
2357		le = hci_connect_le_scan(hdev, dst, dst_type,
2358					 BT_SECURITY_LOW,
2359					 HCI_LE_CONN_TIMEOUT,
2360					 CONN_REASON_ISO_CONNECT);
2361	if (IS_ERR(le))
2362		return le;
2363
2364	hci_iso_qos_setup(hdev, le, &qos->ucast.out,
2365			  le->le_tx_phy ? le->le_tx_phy : hdev->le_tx_def_phys);
2366	hci_iso_qos_setup(hdev, le, &qos->ucast.in,
2367			  le->le_rx_phy ? le->le_rx_phy : hdev->le_rx_def_phys);
2368
2369	cis = hci_bind_cis(hdev, dst, dst_type, qos);
2370	if (IS_ERR(cis)) {
2371		hci_conn_drop(le);
2372		return cis;
2373	}
2374
2375	link = hci_conn_link(le, cis);
2376	if (!link) {
2377		hci_conn_drop(le);
2378		hci_conn_drop(cis);
2379		return ERR_PTR(-ENOLINK);
2380	}
2381
2382	/* Link takes the refcount */
2383	hci_conn_drop(cis);
2384
2385	cis->state = BT_CONNECT;
2386
2387	hci_le_create_cis_pending(hdev);
2388
2389	return cis;
2390}
2391
2392/* Check link security requirement */
2393int hci_conn_check_link_mode(struct hci_conn *conn)
2394{
2395	BT_DBG("hcon %p", conn);
2396
2397	/* In Secure Connections Only mode, it is required that Secure
2398	 * Connections is used and the link is encrypted with AES-CCM
2399	 * using a P-256 authenticated combination key.
2400	 */
2401	if (hci_dev_test_flag(conn->hdev, HCI_SC_ONLY)) {
2402		if (!hci_conn_sc_enabled(conn) ||
2403		    !test_bit(HCI_CONN_AES_CCM, &conn->flags) ||
2404		    conn->key_type != HCI_LK_AUTH_COMBINATION_P256)
2405			return 0;
2406	}
2407
2408	 /* AES encryption is required for Level 4:
2409	  *
2410	  * BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C
2411	  * page 1319:
2412	  *
2413	  * 128-bit equivalent strength for link and encryption keys
2414	  * required using FIPS approved algorithms (E0 not allowed,
2415	  * SAFER+ not allowed, and P-192 not allowed; encryption key
2416	  * not shortened)
2417	  */
2418	if (conn->sec_level == BT_SECURITY_FIPS &&
2419	    !test_bit(HCI_CONN_AES_CCM, &conn->flags)) {
2420		bt_dev_err(conn->hdev,
2421			   "Invalid security: Missing AES-CCM usage");
2422		return 0;
2423	}
2424
2425	if (hci_conn_ssp_enabled(conn) &&
2426	    !test_bit(HCI_CONN_ENCRYPT, &conn->flags))
2427		return 0;
2428
2429	return 1;
2430}
2431
2432/* Authenticate remote device */
2433static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
2434{
2435	BT_DBG("hcon %p", conn);
2436
2437	if (conn->pending_sec_level > sec_level)
2438		sec_level = conn->pending_sec_level;
2439
2440	if (sec_level > conn->sec_level)
2441		conn->pending_sec_level = sec_level;
2442	else if (test_bit(HCI_CONN_AUTH, &conn->flags))
2443		return 1;
2444
2445	/* Make sure we preserve an existing MITM requirement*/
2446	auth_type |= (conn->auth_type & 0x01);
2447
2448	conn->auth_type = auth_type;
2449
2450	if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->flags)) {
2451		struct hci_cp_auth_requested cp;
2452
2453		cp.handle = cpu_to_le16(conn->handle);
2454		hci_send_cmd(conn->hdev, HCI_OP_AUTH_REQUESTED,
2455			     sizeof(cp), &cp);
2456
2457		/* Set the ENCRYPT_PEND to trigger encryption after
2458		 * authentication.
2459		 */
2460		if (!test_bit(HCI_CONN_ENCRYPT, &conn->flags))
 
 
2461			set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
2462	}
2463
2464	return 0;
2465}
2466
2467/* Encrypt the link */
2468static void hci_conn_encrypt(struct hci_conn *conn)
2469{
2470	BT_DBG("hcon %p", conn);
2471
2472	if (!test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags)) {
2473		struct hci_cp_set_conn_encrypt cp;
2474		cp.handle  = cpu_to_le16(conn->handle);
2475		cp.encrypt = 0x01;
2476		hci_send_cmd(conn->hdev, HCI_OP_SET_CONN_ENCRYPT, sizeof(cp),
2477			     &cp);
2478	}
2479}
2480
2481/* Enable security */
2482int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type,
2483		      bool initiator)
2484{
2485	BT_DBG("hcon %p", conn);
2486
2487	if (conn->type == LE_LINK)
2488		return smp_conn_security(conn, sec_level);
2489
2490	/* For sdp we don't need the link key. */
2491	if (sec_level == BT_SECURITY_SDP)
2492		return 1;
2493
2494	/* For non 2.1 devices and low security level we don't need the link
2495	   key. */
2496	if (sec_level == BT_SECURITY_LOW && !hci_conn_ssp_enabled(conn))
2497		return 1;
2498
2499	/* For other security levels we need the link key. */
2500	if (!test_bit(HCI_CONN_AUTH, &conn->flags))
2501		goto auth;
2502
2503	switch (conn->key_type) {
2504	case HCI_LK_AUTH_COMBINATION_P256:
2505		/* An authenticated FIPS approved combination key has
2506		 * sufficient security for security level 4 or lower.
2507		 */
2508		if (sec_level <= BT_SECURITY_FIPS)
2509			goto encrypt;
2510		break;
2511	case HCI_LK_AUTH_COMBINATION_P192:
2512		/* An authenticated combination key has sufficient security for
2513		 * security level 3 or lower.
2514		 */
2515		if (sec_level <= BT_SECURITY_HIGH)
2516			goto encrypt;
2517		break;
2518	case HCI_LK_UNAUTH_COMBINATION_P192:
2519	case HCI_LK_UNAUTH_COMBINATION_P256:
2520		/* An unauthenticated combination key has sufficient security
2521		 * for security level 2 or lower.
2522		 */
2523		if (sec_level <= BT_SECURITY_MEDIUM)
2524			goto encrypt;
2525		break;
2526	case HCI_LK_COMBINATION:
2527		/* A combination key has always sufficient security for the
2528		 * security levels 2 or lower. High security level requires the
2529		 * combination key is generated using maximum PIN code length
2530		 * (16). For pre 2.1 units.
2531		 */
2532		if (sec_level <= BT_SECURITY_MEDIUM || conn->pin_length == 16)
2533			goto encrypt;
2534		break;
2535	default:
2536		break;
2537	}
2538
2539auth:
2540	if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags))
2541		return 0;
2542
2543	if (initiator)
2544		set_bit(HCI_CONN_AUTH_INITIATOR, &conn->flags);
2545
2546	if (!hci_conn_auth(conn, sec_level, auth_type))
2547		return 0;
2548
2549encrypt:
2550	if (test_bit(HCI_CONN_ENCRYPT, &conn->flags)) {
2551		/* Ensure that the encryption key size has been read,
2552		 * otherwise stall the upper layer responses.
2553		 */
2554		if (!conn->enc_key_size)
2555			return 0;
2556
2557		/* Nothing else needed, all requirements are met */
2558		return 1;
2559	}
2560
2561	hci_conn_encrypt(conn);
2562	return 0;
2563}
2564EXPORT_SYMBOL(hci_conn_security);
2565
2566/* Check secure link requirement */
2567int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level)
2568{
2569	BT_DBG("hcon %p", conn);
2570
2571	/* Accept if non-secure or higher security level is required */
2572	if (sec_level != BT_SECURITY_HIGH && sec_level != BT_SECURITY_FIPS)
2573		return 1;
2574
2575	/* Accept if secure or higher security level is already present */
2576	if (conn->sec_level == BT_SECURITY_HIGH ||
2577	    conn->sec_level == BT_SECURITY_FIPS)
2578		return 1;
2579
2580	/* Reject not secure link */
2581	return 0;
2582}
2583EXPORT_SYMBOL(hci_conn_check_secure);
2584
2585/* Switch role */
2586int hci_conn_switch_role(struct hci_conn *conn, __u8 role)
2587{
2588	BT_DBG("hcon %p", conn);
2589
2590	if (role == conn->role)
2591		return 1;
2592
2593	if (!test_and_set_bit(HCI_CONN_RSWITCH_PEND, &conn->flags)) {
2594		struct hci_cp_switch_role cp;
2595		bacpy(&cp.bdaddr, &conn->dst);
2596		cp.role = role;
2597		hci_send_cmd(conn->hdev, HCI_OP_SWITCH_ROLE, sizeof(cp), &cp);
2598	}
2599
2600	return 0;
2601}
2602EXPORT_SYMBOL(hci_conn_switch_role);
2603
2604/* Enter active mode */
2605void hci_conn_enter_active_mode(struct hci_conn *conn, __u8 force_active)
2606{
2607	struct hci_dev *hdev = conn->hdev;
2608
2609	BT_DBG("hcon %p mode %d", conn, conn->mode);
2610
2611	if (conn->mode != HCI_CM_SNIFF)
2612		goto timer;
2613
2614	if (!test_bit(HCI_CONN_POWER_SAVE, &conn->flags) && !force_active)
2615		goto timer;
2616
2617	if (!test_and_set_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags)) {
2618		struct hci_cp_exit_sniff_mode cp;
2619		cp.handle = cpu_to_le16(conn->handle);
2620		hci_send_cmd(hdev, HCI_OP_EXIT_SNIFF_MODE, sizeof(cp), &cp);
2621	}
2622
2623timer:
2624	if (hdev->idle_timeout > 0)
2625		queue_delayed_work(hdev->workqueue, &conn->idle_work,
2626				   msecs_to_jiffies(hdev->idle_timeout));
2627}
2628
2629/* Drop all connection on the device */
2630void hci_conn_hash_flush(struct hci_dev *hdev)
2631{
2632	struct list_head *head = &hdev->conn_hash.list;
2633	struct hci_conn *conn;
2634
2635	BT_DBG("hdev %s", hdev->name);
2636
2637	/* We should not traverse the list here, because hci_conn_del
2638	 * can remove extra links, which may cause the list traversal
2639	 * to hit items that have already been released.
2640	 */
2641	while ((conn = list_first_entry_or_null(head,
2642						struct hci_conn,
2643						list)) != NULL) {
2644		conn->state = BT_CLOSED;
2645		hci_disconn_cfm(conn, HCI_ERROR_LOCAL_HOST_TERM);
2646		hci_conn_del(conn);
2647	}
2648}
2649
2650/* Check pending connect attempts */
2651void hci_conn_check_pending(struct hci_dev *hdev)
2652{
2653	struct hci_conn *conn;
2654
2655	BT_DBG("hdev %s", hdev->name);
2656
2657	hci_dev_lock(hdev);
2658
2659	conn = hci_conn_hash_lookup_state(hdev, ACL_LINK, BT_CONNECT2);
2660	if (conn)
2661		hci_acl_create_connection(conn);
2662
2663	hci_dev_unlock(hdev);
2664}
2665
2666static u32 get_link_mode(struct hci_conn *conn)
2667{
2668	u32 link_mode = 0;
2669
2670	if (conn->role == HCI_ROLE_MASTER)
2671		link_mode |= HCI_LM_MASTER;
2672
2673	if (test_bit(HCI_CONN_ENCRYPT, &conn->flags))
2674		link_mode |= HCI_LM_ENCRYPT;
2675
2676	if (test_bit(HCI_CONN_AUTH, &conn->flags))
2677		link_mode |= HCI_LM_AUTH;
2678
2679	if (test_bit(HCI_CONN_SECURE, &conn->flags))
2680		link_mode |= HCI_LM_SECURE;
2681
2682	if (test_bit(HCI_CONN_FIPS, &conn->flags))
2683		link_mode |= HCI_LM_FIPS;
2684
2685	return link_mode;
2686}
2687
2688int hci_get_conn_list(void __user *arg)
2689{
2690	struct hci_conn *c;
2691	struct hci_conn_list_req req, *cl;
2692	struct hci_conn_info *ci;
2693	struct hci_dev *hdev;
2694	int n = 0, size, err;
2695
2696	if (copy_from_user(&req, arg, sizeof(req)))
2697		return -EFAULT;
2698
2699	if (!req.conn_num || req.conn_num > (PAGE_SIZE * 2) / sizeof(*ci))
2700		return -EINVAL;
2701
2702	size = sizeof(req) + req.conn_num * sizeof(*ci);
2703
2704	cl = kmalloc(size, GFP_KERNEL);
2705	if (!cl)
2706		return -ENOMEM;
2707
2708	hdev = hci_dev_get(req.dev_id);
2709	if (!hdev) {
2710		kfree(cl);
2711		return -ENODEV;
2712	}
2713
2714	ci = cl->conn_info;
2715
2716	hci_dev_lock(hdev);
2717	list_for_each_entry(c, &hdev->conn_hash.list, list) {
2718		bacpy(&(ci + n)->bdaddr, &c->dst);
2719		(ci + n)->handle = c->handle;
2720		(ci + n)->type  = c->type;
2721		(ci + n)->out   = c->out;
2722		(ci + n)->state = c->state;
2723		(ci + n)->link_mode = get_link_mode(c);
2724		if (++n >= req.conn_num)
2725			break;
2726	}
2727	hci_dev_unlock(hdev);
2728
2729	cl->dev_id = hdev->id;
2730	cl->conn_num = n;
2731	size = sizeof(req) + n * sizeof(*ci);
2732
2733	hci_dev_put(hdev);
2734
2735	err = copy_to_user(arg, cl, size);
2736	kfree(cl);
2737
2738	return err ? -EFAULT : 0;
2739}
2740
2741int hci_get_conn_info(struct hci_dev *hdev, void __user *arg)
2742{
2743	struct hci_conn_info_req req;
2744	struct hci_conn_info ci;
2745	struct hci_conn *conn;
2746	char __user *ptr = arg + sizeof(req);
2747
2748	if (copy_from_user(&req, arg, sizeof(req)))
2749		return -EFAULT;
2750
2751	hci_dev_lock(hdev);
2752	conn = hci_conn_hash_lookup_ba(hdev, req.type, &req.bdaddr);
2753	if (conn) {
2754		bacpy(&ci.bdaddr, &conn->dst);
2755		ci.handle = conn->handle;
2756		ci.type  = conn->type;
2757		ci.out   = conn->out;
2758		ci.state = conn->state;
2759		ci.link_mode = get_link_mode(conn);
2760	}
2761	hci_dev_unlock(hdev);
2762
2763	if (!conn)
2764		return -ENOENT;
2765
2766	return copy_to_user(ptr, &ci, sizeof(ci)) ? -EFAULT : 0;
2767}
2768
2769int hci_get_auth_info(struct hci_dev *hdev, void __user *arg)
2770{
2771	struct hci_auth_info_req req;
2772	struct hci_conn *conn;
2773
2774	if (copy_from_user(&req, arg, sizeof(req)))
2775		return -EFAULT;
2776
2777	hci_dev_lock(hdev);
2778	conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &req.bdaddr);
2779	if (conn)
2780		req.type = conn->auth_type;
2781	hci_dev_unlock(hdev);
2782
2783	if (!conn)
2784		return -ENOENT;
2785
2786	return copy_to_user(arg, &req, sizeof(req)) ? -EFAULT : 0;
2787}
2788
2789struct hci_chan *hci_chan_create(struct hci_conn *conn)
2790{
2791	struct hci_dev *hdev = conn->hdev;
2792	struct hci_chan *chan;
2793
2794	BT_DBG("%s hcon %p", hdev->name, conn);
2795
2796	if (test_bit(HCI_CONN_DROP, &conn->flags)) {
2797		BT_DBG("Refusing to create new hci_chan");
2798		return NULL;
2799	}
2800
2801	chan = kzalloc(sizeof(*chan), GFP_KERNEL);
2802	if (!chan)
2803		return NULL;
2804
2805	chan->conn = hci_conn_get(conn);
2806	skb_queue_head_init(&chan->data_q);
2807	chan->state = BT_CONNECTED;
2808
2809	list_add_rcu(&chan->list, &conn->chan_list);
2810
2811	return chan;
2812}
2813
2814void hci_chan_del(struct hci_chan *chan)
2815{
2816	struct hci_conn *conn = chan->conn;
2817	struct hci_dev *hdev = conn->hdev;
2818
2819	BT_DBG("%s hcon %p chan %p", hdev->name, conn, chan);
2820
2821	list_del_rcu(&chan->list);
2822
2823	synchronize_rcu();
2824
2825	/* Prevent new hci_chan's to be created for this hci_conn */
2826	set_bit(HCI_CONN_DROP, &conn->flags);
2827
2828	hci_conn_put(conn);
2829
2830	skb_queue_purge(&chan->data_q);
2831	kfree(chan);
2832}
2833
2834void hci_chan_list_flush(struct hci_conn *conn)
2835{
2836	struct hci_chan *chan, *n;
2837
2838	BT_DBG("hcon %p", conn);
2839
2840	list_for_each_entry_safe(chan, n, &conn->chan_list, list)
2841		hci_chan_del(chan);
2842}
2843
2844static struct hci_chan *__hci_chan_lookup_handle(struct hci_conn *hcon,
2845						 __u16 handle)
2846{
2847	struct hci_chan *hchan;
2848
2849	list_for_each_entry(hchan, &hcon->chan_list, list) {
2850		if (hchan->handle == handle)
2851			return hchan;
2852	}
2853
2854	return NULL;
2855}
2856
2857struct hci_chan *hci_chan_lookup_handle(struct hci_dev *hdev, __u16 handle)
2858{
2859	struct hci_conn_hash *h = &hdev->conn_hash;
2860	struct hci_conn *hcon;
2861	struct hci_chan *hchan = NULL;
2862
2863	rcu_read_lock();
2864
2865	list_for_each_entry_rcu(hcon, &h->list, list) {
2866		hchan = __hci_chan_lookup_handle(hcon, handle);
2867		if (hchan)
2868			break;
2869	}
2870
2871	rcu_read_unlock();
2872
2873	return hchan;
2874}
2875
2876u32 hci_conn_get_phy(struct hci_conn *conn)
2877{
2878	u32 phys = 0;
2879
2880	/* BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 2, Part B page 471:
2881	 * Table 6.2: Packets defined for synchronous, asynchronous, and
2882	 * CPB logical transport types.
2883	 */
2884	switch (conn->type) {
2885	case SCO_LINK:
2886		/* SCO logical transport (1 Mb/s):
2887		 * HV1, HV2, HV3 and DV.
2888		 */
2889		phys |= BT_PHY_BR_1M_1SLOT;
2890
2891		break;
2892
2893	case ACL_LINK:
2894		/* ACL logical transport (1 Mb/s) ptt=0:
2895		 * DH1, DM3, DH3, DM5 and DH5.
2896		 */
2897		phys |= BT_PHY_BR_1M_1SLOT;
2898
2899		if (conn->pkt_type & (HCI_DM3 | HCI_DH3))
2900			phys |= BT_PHY_BR_1M_3SLOT;
2901
2902		if (conn->pkt_type & (HCI_DM5 | HCI_DH5))
2903			phys |= BT_PHY_BR_1M_5SLOT;
2904
2905		/* ACL logical transport (2 Mb/s) ptt=1:
2906		 * 2-DH1, 2-DH3 and 2-DH5.
2907		 */
2908		if (!(conn->pkt_type & HCI_2DH1))
2909			phys |= BT_PHY_EDR_2M_1SLOT;
2910
2911		if (!(conn->pkt_type & HCI_2DH3))
2912			phys |= BT_PHY_EDR_2M_3SLOT;
2913
2914		if (!(conn->pkt_type & HCI_2DH5))
2915			phys |= BT_PHY_EDR_2M_5SLOT;
2916
2917		/* ACL logical transport (3 Mb/s) ptt=1:
2918		 * 3-DH1, 3-DH3 and 3-DH5.
2919		 */
2920		if (!(conn->pkt_type & HCI_3DH1))
2921			phys |= BT_PHY_EDR_3M_1SLOT;
2922
2923		if (!(conn->pkt_type & HCI_3DH3))
2924			phys |= BT_PHY_EDR_3M_3SLOT;
2925
2926		if (!(conn->pkt_type & HCI_3DH5))
2927			phys |= BT_PHY_EDR_3M_5SLOT;
2928
2929		break;
2930
2931	case ESCO_LINK:
2932		/* eSCO logical transport (1 Mb/s): EV3, EV4 and EV5 */
2933		phys |= BT_PHY_BR_1M_1SLOT;
2934
2935		if (!(conn->pkt_type & (ESCO_EV4 | ESCO_EV5)))
2936			phys |= BT_PHY_BR_1M_3SLOT;
2937
2938		/* eSCO logical transport (2 Mb/s): 2-EV3, 2-EV5 */
2939		if (!(conn->pkt_type & ESCO_2EV3))
2940			phys |= BT_PHY_EDR_2M_1SLOT;
2941
2942		if (!(conn->pkt_type & ESCO_2EV5))
2943			phys |= BT_PHY_EDR_2M_3SLOT;
2944
2945		/* eSCO logical transport (3 Mb/s): 3-EV3, 3-EV5 */
2946		if (!(conn->pkt_type & ESCO_3EV3))
2947			phys |= BT_PHY_EDR_3M_1SLOT;
2948
2949		if (!(conn->pkt_type & ESCO_3EV5))
2950			phys |= BT_PHY_EDR_3M_3SLOT;
2951
2952		break;
2953
2954	case LE_LINK:
2955		if (conn->le_tx_phy & HCI_LE_SET_PHY_1M)
2956			phys |= BT_PHY_LE_1M_TX;
2957
2958		if (conn->le_rx_phy & HCI_LE_SET_PHY_1M)
2959			phys |= BT_PHY_LE_1M_RX;
2960
2961		if (conn->le_tx_phy & HCI_LE_SET_PHY_2M)
2962			phys |= BT_PHY_LE_2M_TX;
2963
2964		if (conn->le_rx_phy & HCI_LE_SET_PHY_2M)
2965			phys |= BT_PHY_LE_2M_RX;
2966
2967		if (conn->le_tx_phy & HCI_LE_SET_PHY_CODED)
2968			phys |= BT_PHY_LE_CODED_TX;
2969
2970		if (conn->le_rx_phy & HCI_LE_SET_PHY_CODED)
2971			phys |= BT_PHY_LE_CODED_RX;
2972
2973		break;
2974	}
2975
2976	return phys;
2977}
2978
2979static int abort_conn_sync(struct hci_dev *hdev, void *data)
2980{
2981	struct hci_conn *conn;
2982	u16 handle = PTR_UINT(data);
2983
2984	conn = hci_conn_hash_lookup_handle(hdev, handle);
2985	if (!conn)
2986		return 0;
2987
2988	return hci_abort_conn_sync(hdev, conn, conn->abort_reason);
2989}
2990
2991int hci_abort_conn(struct hci_conn *conn, u8 reason)
2992{
2993	struct hci_dev *hdev = conn->hdev;
2994
2995	/* If abort_reason has already been set it means the connection is
2996	 * already being aborted so don't attempt to overwrite it.
2997	 */
2998	if (conn->abort_reason)
2999		return 0;
3000
3001	bt_dev_dbg(hdev, "handle 0x%2.2x reason 0x%2.2x", conn->handle, reason);
3002
3003	conn->abort_reason = reason;
3004
3005	/* If the connection is pending check the command opcode since that
3006	 * might be blocking on hci_cmd_sync_work while waiting its respective
3007	 * event so we need to hci_cmd_sync_cancel to cancel it.
3008	 *
3009	 * hci_connect_le serializes the connection attempts so only one
3010	 * connection can be in BT_CONNECT at time.
3011	 */
3012	if (conn->state == BT_CONNECT && hdev->req_status == HCI_REQ_PEND) {
3013		switch (hci_skb_event(hdev->sent_cmd)) {
3014		case HCI_EV_LE_CONN_COMPLETE:
3015		case HCI_EV_LE_ENHANCED_CONN_COMPLETE:
3016		case HCI_EVT_LE_CIS_ESTABLISHED:
3017			hci_cmd_sync_cancel(hdev, -ECANCELED);
3018			break;
3019		}
3020	}
3021
3022	return hci_cmd_sync_queue(hdev, abort_conn_sync, UINT_PTR(conn->handle),
3023				  NULL);
3024}
v5.14.15
   1/*
   2   BlueZ - Bluetooth protocol stack for Linux
   3   Copyright (c) 2000-2001, 2010, Code Aurora Forum. All rights reserved.
 
   4
   5   Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
   6
   7   This program is free software; you can redistribute it and/or modify
   8   it under the terms of the GNU General Public License version 2 as
   9   published by the Free Software Foundation;
  10
  11   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
  12   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  13   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
  14   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
  15   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
  16   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  17   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  18   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  19
  20   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
  21   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
  22   SOFTWARE IS DISCLAIMED.
  23*/
  24
  25/* Bluetooth HCI connection handling. */
  26
  27#include <linux/export.h>
  28#include <linux/debugfs.h>
  29
  30#include <net/bluetooth/bluetooth.h>
  31#include <net/bluetooth/hci_core.h>
  32#include <net/bluetooth/l2cap.h>
 
 
  33
  34#include "hci_request.h"
  35#include "smp.h"
  36#include "a2mp.h"
 
  37
  38struct sco_param {
  39	u16 pkt_type;
  40	u16 max_latency;
  41	u8  retrans_effort;
  42};
  43
 
 
 
 
 
  44static const struct sco_param esco_param_cvsd[] = {
  45	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x000a,	0x01 }, /* S3 */
  46	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x0007,	0x01 }, /* S2 */
  47	{ EDR_ESCO_MASK | ESCO_EV3,   0x0007,	0x01 }, /* S1 */
  48	{ EDR_ESCO_MASK | ESCO_HV3,   0xffff,	0x01 }, /* D1 */
  49	{ EDR_ESCO_MASK | ESCO_HV1,   0xffff,	0x01 }, /* D0 */
  50};
  51
  52static const struct sco_param sco_param_cvsd[] = {
  53	{ EDR_ESCO_MASK | ESCO_HV3,   0xffff,	0xff }, /* D1 */
  54	{ EDR_ESCO_MASK | ESCO_HV1,   0xffff,	0xff }, /* D0 */
  55};
  56
  57static const struct sco_param esco_param_msbc[] = {
  58	{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x000d,	0x02 }, /* T2 */
  59	{ EDR_ESCO_MASK | ESCO_EV3,   0x0008,	0x02 }, /* T1 */
  60};
  61
  62/* This function requires the caller holds hdev->lock */
  63static void hci_connect_le_scan_cleanup(struct hci_conn *conn)
  64{
  65	struct hci_conn_params *params;
  66	struct hci_dev *hdev = conn->hdev;
  67	struct smp_irk *irk;
  68	bdaddr_t *bdaddr;
  69	u8 bdaddr_type;
  70
  71	bdaddr = &conn->dst;
  72	bdaddr_type = conn->dst_type;
  73
  74	/* Check if we need to convert to identity address */
  75	irk = hci_get_irk(hdev, bdaddr, bdaddr_type);
  76	if (irk) {
  77		bdaddr = &irk->bdaddr;
  78		bdaddr_type = irk->addr_type;
  79	}
  80
  81	params = hci_pend_le_action_lookup(&hdev->pend_le_conns, bdaddr,
  82					   bdaddr_type);
  83	if (!params || !params->explicit_connect)
 
 
 
 
 
 
 
 
 
  84		return;
  85
 
 
 
 
 
 
 
 
 
 
  86	/* The connection attempt was doing scan for new RPA, and is
  87	 * in scan phase. If params are not associated with any other
  88	 * autoconnect action, remove them completely. If they are, just unmark
  89	 * them as waiting for connection, by clearing explicit_connect field.
  90	 */
  91	params->explicit_connect = false;
  92
  93	list_del_init(&params->action);
  94
  95	switch (params->auto_connect) {
  96	case HCI_AUTO_CONN_EXPLICIT:
  97		hci_conn_params_del(hdev, bdaddr, bdaddr_type);
  98		/* return instead of break to avoid duplicate scan update */
  99		return;
 100	case HCI_AUTO_CONN_DIRECT:
 101	case HCI_AUTO_CONN_ALWAYS:
 102		list_add(&params->action, &hdev->pend_le_conns);
 103		break;
 104	case HCI_AUTO_CONN_REPORT:
 105		list_add(&params->action, &hdev->pend_le_reports);
 106		break;
 107	default:
 108		break;
 109	}
 110
 111	hci_update_background_scan(hdev);
 112}
 113
 114static void hci_conn_cleanup(struct hci_conn *conn)
 115{
 116	struct hci_dev *hdev = conn->hdev;
 117
 118	if (test_bit(HCI_CONN_PARAM_REMOVAL_PEND, &conn->flags))
 119		hci_conn_params_del(conn->hdev, &conn->dst, conn->dst_type);
 120
 
 
 
 121	hci_chan_list_flush(conn);
 122
 123	hci_conn_hash_del(hdev, conn);
 124
 
 
 
 
 
 
 125	if (conn->type == SCO_LINK || conn->type == ESCO_LINK) {
 126		switch (conn->setting & SCO_AIRMODE_MASK) {
 127		case SCO_AIRMODE_CVSD:
 128		case SCO_AIRMODE_TRANSP:
 129			if (hdev->notify)
 130				hdev->notify(hdev, HCI_NOTIFY_DISABLE_SCO);
 131			break;
 132		}
 133	} else {
 134		if (hdev->notify)
 135			hdev->notify(hdev, HCI_NOTIFY_CONN_DEL);
 136	}
 137
 138	hci_conn_del_sysfs(conn);
 139
 140	debugfs_remove_recursive(conn->debugfs);
 141
 142	hci_dev_put(hdev);
 143
 144	hci_conn_put(conn);
 145}
 146
 147static void le_scan_cleanup(struct work_struct *work)
 148{
 149	struct hci_conn *conn = container_of(work, struct hci_conn,
 150					     le_scan_cleanup);
 151	struct hci_dev *hdev = conn->hdev;
 152	struct hci_conn *c = NULL;
 153
 154	BT_DBG("%s hcon %p", hdev->name, conn);
 155
 156	hci_dev_lock(hdev);
 157
 158	/* Check that the hci_conn is still around */
 159	rcu_read_lock();
 160	list_for_each_entry_rcu(c, &hdev->conn_hash.list, list) {
 161		if (c == conn)
 162			break;
 163	}
 164	rcu_read_unlock();
 165
 166	if (c == conn) {
 167		hci_connect_le_scan_cleanup(conn);
 168		hci_conn_cleanup(conn);
 169	}
 170
 171	hci_dev_unlock(hdev);
 172	hci_dev_put(hdev);
 173	hci_conn_put(conn);
 174}
 175
 176static void hci_connect_le_scan_remove(struct hci_conn *conn)
 177{
 178	BT_DBG("%s hcon %p", conn->hdev->name, conn);
 179
 180	/* We can't call hci_conn_del/hci_conn_cleanup here since that
 181	 * could deadlock with another hci_conn_del() call that's holding
 182	 * hci_dev_lock and doing cancel_delayed_work_sync(&conn->disc_work).
 183	 * Instead, grab temporary extra references to the hci_dev and
 184	 * hci_conn and perform the necessary cleanup in a separate work
 185	 * callback.
 186	 */
 187
 188	hci_dev_hold(conn->hdev);
 189	hci_conn_get(conn);
 190
 191	/* Even though we hold a reference to the hdev, many other
 192	 * things might get cleaned up meanwhile, including the hdev's
 193	 * own workqueue, so we can't use that for scheduling.
 194	 */
 195	schedule_work(&conn->le_scan_cleanup);
 196}
 197
 198static void hci_acl_create_connection(struct hci_conn *conn)
 199{
 200	struct hci_dev *hdev = conn->hdev;
 201	struct inquiry_entry *ie;
 202	struct hci_cp_create_conn cp;
 203
 204	BT_DBG("hcon %p", conn);
 205
 206	/* Many controllers disallow HCI Create Connection while it is doing
 207	 * HCI Inquiry. So we cancel the Inquiry first before issuing HCI Create
 208	 * Connection. This may cause the MGMT discovering state to become false
 209	 * without user space's request but it is okay since the MGMT Discovery
 210	 * APIs do not promise that discovery should be done forever. Instead,
 211	 * the user space monitors the status of MGMT discovering and it may
 212	 * request for discovery again when this flag becomes false.
 213	 */
 214	if (test_bit(HCI_INQUIRY, &hdev->flags)) {
 215		/* Put this connection to "pending" state so that it will be
 216		 * executed after the inquiry cancel command complete event.
 217		 */
 218		conn->state = BT_CONNECT2;
 219		hci_send_cmd(hdev, HCI_OP_INQUIRY_CANCEL, 0, NULL);
 220		return;
 221	}
 222
 223	conn->state = BT_CONNECT;
 224	conn->out = true;
 225	conn->role = HCI_ROLE_MASTER;
 226
 227	conn->attempt++;
 228
 229	conn->link_policy = hdev->link_policy;
 230
 231	memset(&cp, 0, sizeof(cp));
 232	bacpy(&cp.bdaddr, &conn->dst);
 233	cp.pscan_rep_mode = 0x02;
 234
 235	ie = hci_inquiry_cache_lookup(hdev, &conn->dst);
 236	if (ie) {
 237		if (inquiry_entry_age(ie) <= INQUIRY_ENTRY_AGE_MAX) {
 238			cp.pscan_rep_mode = ie->data.pscan_rep_mode;
 239			cp.pscan_mode     = ie->data.pscan_mode;
 240			cp.clock_offset   = ie->data.clock_offset |
 241					    cpu_to_le16(0x8000);
 242		}
 243
 244		memcpy(conn->dev_class, ie->data.dev_class, 3);
 245	}
 246
 247	cp.pkt_type = cpu_to_le16(conn->pkt_type);
 248	if (lmp_rswitch_capable(hdev) && !(hdev->link_mode & HCI_LM_MASTER))
 249		cp.role_switch = 0x01;
 250	else
 251		cp.role_switch = 0x00;
 252
 253	hci_send_cmd(hdev, HCI_OP_CREATE_CONN, sizeof(cp), &cp);
 254}
 255
 256int hci_disconnect(struct hci_conn *conn, __u8 reason)
 257{
 258	BT_DBG("hcon %p", conn);
 259
 260	/* When we are central of an established connection and it enters
 261	 * the disconnect timeout, then go ahead and try to read the
 262	 * current clock offset.  Processing of the result is done
 263	 * within the event handling and hci_clock_offset_evt function.
 264	 */
 265	if (conn->type == ACL_LINK && conn->role == HCI_ROLE_MASTER &&
 266	    (conn->state == BT_CONNECTED || conn->state == BT_CONFIG)) {
 267		struct hci_dev *hdev = conn->hdev;
 268		struct hci_cp_read_clock_offset clkoff_cp;
 269
 270		clkoff_cp.handle = cpu_to_le16(conn->handle);
 271		hci_send_cmd(hdev, HCI_OP_READ_CLOCK_OFFSET, sizeof(clkoff_cp),
 272			     &clkoff_cp);
 273	}
 274
 275	return hci_abort_conn(conn, reason);
 276}
 277
 278static void hci_add_sco(struct hci_conn *conn, __u16 handle)
 279{
 280	struct hci_dev *hdev = conn->hdev;
 281	struct hci_cp_add_sco cp;
 282
 283	BT_DBG("hcon %p", conn);
 284
 285	conn->state = BT_CONNECT;
 286	conn->out = true;
 287
 288	conn->attempt++;
 289
 290	cp.handle   = cpu_to_le16(handle);
 291	cp.pkt_type = cpu_to_le16(conn->pkt_type);
 292
 293	hci_send_cmd(hdev, HCI_OP_ADD_SCO, sizeof(cp), &cp);
 294}
 295
 296static bool find_next_esco_param(struct hci_conn *conn,
 297				 const struct sco_param *esco_param, int size)
 298{
 
 
 
 299	for (; conn->attempt <= size; conn->attempt++) {
 300		if (lmp_esco_2m_capable(conn->link) ||
 301		    (esco_param[conn->attempt - 1].pkt_type & ESCO_2EV3))
 302			break;
 303		BT_DBG("hcon %p skipped attempt %d, eSCO 2M not supported",
 304		       conn, conn->attempt);
 305	}
 306
 307	return conn->attempt <= size;
 308}
 309
 310bool hci_setup_sync(struct hci_conn *conn, __u16 handle)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 311{
 312	struct hci_dev *hdev = conn->hdev;
 313	struct hci_cp_setup_sync_conn cp;
 314	const struct sco_param *param;
 315
 316	BT_DBG("hcon %p", conn);
 317
 318	conn->state = BT_CONNECT;
 319	conn->out = true;
 320
 321	conn->attempt++;
 322
 323	cp.handle   = cpu_to_le16(handle);
 324
 325	cp.tx_bandwidth   = cpu_to_le32(0x00001f40);
 326	cp.rx_bandwidth   = cpu_to_le32(0x00001f40);
 327	cp.voice_setting  = cpu_to_le16(conn->setting);
 328
 329	switch (conn->setting & SCO_AIRMODE_MASK) {
 330	case SCO_AIRMODE_TRANSP:
 331		if (!find_next_esco_param(conn, esco_param_msbc,
 332					  ARRAY_SIZE(esco_param_msbc)))
 333			return false;
 334		param = &esco_param_msbc[conn->attempt - 1];
 335		break;
 336	case SCO_AIRMODE_CVSD:
 337		if (lmp_esco_capable(conn->link)) {
 338			if (!find_next_esco_param(conn, esco_param_cvsd,
 339						  ARRAY_SIZE(esco_param_cvsd)))
 340				return false;
 341			param = &esco_param_cvsd[conn->attempt - 1];
 342		} else {
 343			if (conn->attempt > ARRAY_SIZE(sco_param_cvsd))
 344				return false;
 345			param = &sco_param_cvsd[conn->attempt - 1];
 346		}
 347		break;
 348	default:
 349		return false;
 350	}
 351
 352	cp.retrans_effort = param->retrans_effort;
 353	cp.pkt_type = __cpu_to_le16(param->pkt_type);
 354	cp.max_latency = __cpu_to_le16(param->max_latency);
 355
 356	if (hci_send_cmd(hdev, HCI_OP_SETUP_SYNC_CONN, sizeof(cp), &cp) < 0)
 357		return false;
 358
 359	return true;
 360}
 361
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 362u8 hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max, u16 latency,
 363		      u16 to_multiplier)
 364{
 365	struct hci_dev *hdev = conn->hdev;
 366	struct hci_conn_params *params;
 367	struct hci_cp_le_conn_update cp;
 368
 369	hci_dev_lock(hdev);
 370
 371	params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
 372	if (params) {
 373		params->conn_min_interval = min;
 374		params->conn_max_interval = max;
 375		params->conn_latency = latency;
 376		params->supervision_timeout = to_multiplier;
 377	}
 378
 379	hci_dev_unlock(hdev);
 380
 381	memset(&cp, 0, sizeof(cp));
 382	cp.handle		= cpu_to_le16(conn->handle);
 383	cp.conn_interval_min	= cpu_to_le16(min);
 384	cp.conn_interval_max	= cpu_to_le16(max);
 385	cp.conn_latency		= cpu_to_le16(latency);
 386	cp.supervision_timeout	= cpu_to_le16(to_multiplier);
 387	cp.min_ce_len		= cpu_to_le16(0x0000);
 388	cp.max_ce_len		= cpu_to_le16(0x0000);
 389
 390	hci_send_cmd(hdev, HCI_OP_LE_CONN_UPDATE, sizeof(cp), &cp);
 391
 392	if (params)
 393		return 0x01;
 394
 395	return 0x00;
 396}
 397
 398void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __le64 rand,
 399		      __u8 ltk[16], __u8 key_size)
 400{
 401	struct hci_dev *hdev = conn->hdev;
 402	struct hci_cp_le_start_enc cp;
 403
 404	BT_DBG("hcon %p", conn);
 405
 406	memset(&cp, 0, sizeof(cp));
 407
 408	cp.handle = cpu_to_le16(conn->handle);
 409	cp.rand = rand;
 410	cp.ediv = ediv;
 411	memcpy(cp.ltk, ltk, key_size);
 412
 413	hci_send_cmd(hdev, HCI_OP_LE_START_ENC, sizeof(cp), &cp);
 414}
 415
 416/* Device _must_ be locked */
 417void hci_sco_setup(struct hci_conn *conn, __u8 status)
 418{
 419	struct hci_conn *sco = conn->link;
 420
 421	if (!sco)
 
 422		return;
 423
 424	BT_DBG("hcon %p", conn);
 425
 426	if (!status) {
 427		if (lmp_esco_capable(conn->hdev))
 428			hci_setup_sync(sco, conn->handle);
 429		else
 430			hci_add_sco(sco, conn->handle);
 431	} else {
 432		hci_connect_cfm(sco, status);
 433		hci_conn_del(sco);
 434	}
 435}
 436
 437static void hci_conn_timeout(struct work_struct *work)
 438{
 439	struct hci_conn *conn = container_of(work, struct hci_conn,
 440					     disc_work.work);
 441	int refcnt = atomic_read(&conn->refcnt);
 442
 443	BT_DBG("hcon %p state %s", conn, state_to_string(conn->state));
 444
 445	WARN_ON(refcnt < 0);
 446
 447	/* FIXME: It was observed that in pairing failed scenario, refcnt
 448	 * drops below 0. Probably this is because l2cap_conn_del calls
 449	 * l2cap_chan_del for each channel, and inside l2cap_chan_del conn is
 450	 * dropped. After that loop hci_chan_del is called which also drops
 451	 * conn. For now make sure that ACL is alive if refcnt is higher then 0,
 452	 * otherwise drop it.
 453	 */
 454	if (refcnt > 0)
 455		return;
 456
 457	/* LE connections in scanning state need special handling */
 458	if (conn->state == BT_CONNECT && conn->type == LE_LINK &&
 459	    test_bit(HCI_CONN_SCANNING, &conn->flags)) {
 460		hci_connect_le_scan_remove(conn);
 461		return;
 462	}
 463
 464	hci_abort_conn(conn, hci_proto_disconn_ind(conn));
 465}
 466
 467/* Enter sniff mode */
 468static void hci_conn_idle(struct work_struct *work)
 469{
 470	struct hci_conn *conn = container_of(work, struct hci_conn,
 471					     idle_work.work);
 472	struct hci_dev *hdev = conn->hdev;
 473
 474	BT_DBG("hcon %p mode %d", conn, conn->mode);
 475
 476	if (!lmp_sniff_capable(hdev) || !lmp_sniff_capable(conn))
 477		return;
 478
 479	if (conn->mode != HCI_CM_ACTIVE || !(conn->link_policy & HCI_LP_SNIFF))
 480		return;
 481
 482	if (lmp_sniffsubr_capable(hdev) && lmp_sniffsubr_capable(conn)) {
 483		struct hci_cp_sniff_subrate cp;
 484		cp.handle             = cpu_to_le16(conn->handle);
 485		cp.max_latency        = cpu_to_le16(0);
 486		cp.min_remote_timeout = cpu_to_le16(0);
 487		cp.min_local_timeout  = cpu_to_le16(0);
 488		hci_send_cmd(hdev, HCI_OP_SNIFF_SUBRATE, sizeof(cp), &cp);
 489	}
 490
 491	if (!test_and_set_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags)) {
 492		struct hci_cp_sniff_mode cp;
 493		cp.handle       = cpu_to_le16(conn->handle);
 494		cp.max_interval = cpu_to_le16(hdev->sniff_max_interval);
 495		cp.min_interval = cpu_to_le16(hdev->sniff_min_interval);
 496		cp.attempt      = cpu_to_le16(4);
 497		cp.timeout      = cpu_to_le16(1);
 498		hci_send_cmd(hdev, HCI_OP_SNIFF_MODE, sizeof(cp), &cp);
 499	}
 500}
 501
 502static void hci_conn_auto_accept(struct work_struct *work)
 503{
 504	struct hci_conn *conn = container_of(work, struct hci_conn,
 505					     auto_accept_work.work);
 506
 507	hci_send_cmd(conn->hdev, HCI_OP_USER_CONFIRM_REPLY, sizeof(conn->dst),
 508		     &conn->dst);
 509}
 510
 511static void le_disable_advertising(struct hci_dev *hdev)
 512{
 513	if (ext_adv_capable(hdev)) {
 514		struct hci_cp_le_set_ext_adv_enable cp;
 515
 516		cp.enable = 0x00;
 517		cp.num_of_sets = 0x00;
 518
 519		hci_send_cmd(hdev, HCI_OP_LE_SET_EXT_ADV_ENABLE, sizeof(cp),
 520			     &cp);
 521	} else {
 522		u8 enable = 0x00;
 523		hci_send_cmd(hdev, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable),
 524			     &enable);
 525	}
 526}
 527
 528static void le_conn_timeout(struct work_struct *work)
 529{
 530	struct hci_conn *conn = container_of(work, struct hci_conn,
 531					     le_conn_timeout.work);
 532	struct hci_dev *hdev = conn->hdev;
 533
 534	BT_DBG("");
 535
 536	/* We could end up here due to having done directed advertising,
 537	 * so clean up the state if necessary. This should however only
 538	 * happen with broken hardware or if low duty cycle was used
 539	 * (which doesn't have a timeout of its own).
 540	 */
 541	if (conn->role == HCI_ROLE_SLAVE) {
 542		/* Disable LE Advertising */
 543		le_disable_advertising(hdev);
 544		hci_le_conn_failed(conn, HCI_ERROR_ADVERTISING_TIMEOUT);
 
 
 545		return;
 546	}
 547
 548	hci_abort_conn(conn, HCI_ERROR_REMOTE_USER_TERM);
 549}
 550
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 551struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst,
 552			      u8 role)
 553{
 554	struct hci_conn *conn;
 555
 556	BT_DBG("%s dst %pMR", hdev->name, dst);
 557
 558	conn = kzalloc(sizeof(*conn), GFP_KERNEL);
 559	if (!conn)
 560		return NULL;
 561
 562	bacpy(&conn->dst, dst);
 563	bacpy(&conn->src, &hdev->bdaddr);
 
 564	conn->hdev  = hdev;
 565	conn->type  = type;
 566	conn->role  = role;
 567	conn->mode  = HCI_CM_ACTIVE;
 568	conn->state = BT_OPEN;
 569	conn->auth_type = HCI_AT_GENERAL_BONDING;
 570	conn->io_capability = hdev->io_capability;
 571	conn->remote_auth = 0xff;
 572	conn->key_type = 0xff;
 573	conn->rssi = HCI_RSSI_INVALID;
 574	conn->tx_power = HCI_TX_POWER_INVALID;
 575	conn->max_tx_power = HCI_TX_POWER_INVALID;
 
 576
 577	set_bit(HCI_CONN_POWER_SAVE, &conn->flags);
 578	conn->disc_timeout = HCI_DISCONN_TIMEOUT;
 579
 580	/* Set Default Authenticated payload timeout to 30s */
 581	conn->auth_payload_timeout = DEFAULT_AUTH_PAYLOAD_TIMEOUT;
 582
 583	if (conn->role == HCI_ROLE_MASTER)
 584		conn->out = true;
 585
 586	switch (type) {
 587	case ACL_LINK:
 588		conn->pkt_type = hdev->pkt_type & ACL_PTYPE_MASK;
 589		break;
 590	case LE_LINK:
 591		/* conn->src should reflect the local identity address */
 592		hci_copy_identity_address(hdev, &conn->src, &conn->src_type);
 593		break;
 
 
 
 
 
 
 
 
 
 
 
 594	case SCO_LINK:
 595		if (lmp_esco_capable(hdev))
 596			conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
 597					(hdev->esco_type & EDR_ESCO_MASK);
 598		else
 599			conn->pkt_type = hdev->pkt_type & SCO_PTYPE_MASK;
 600		break;
 601	case ESCO_LINK:
 602		conn->pkt_type = hdev->esco_type & ~EDR_ESCO_MASK;
 603		break;
 604	}
 605
 606	skb_queue_head_init(&conn->data_q);
 607
 608	INIT_LIST_HEAD(&conn->chan_list);
 
 609
 610	INIT_DELAYED_WORK(&conn->disc_work, hci_conn_timeout);
 611	INIT_DELAYED_WORK(&conn->auto_accept_work, hci_conn_auto_accept);
 612	INIT_DELAYED_WORK(&conn->idle_work, hci_conn_idle);
 613	INIT_DELAYED_WORK(&conn->le_conn_timeout, le_conn_timeout);
 614	INIT_WORK(&conn->le_scan_cleanup, le_scan_cleanup);
 615
 616	atomic_set(&conn->refcnt, 0);
 617
 618	hci_dev_hold(hdev);
 619
 620	hci_conn_hash_add(hdev, conn);
 621
 622	/* The SCO and eSCO connections will only be notified when their
 623	 * setup has been completed. This is different to ACL links which
 624	 * can be notified right away.
 625	 */
 626	if (conn->type != SCO_LINK && conn->type != ESCO_LINK) {
 627		if (hdev->notify)
 628			hdev->notify(hdev, HCI_NOTIFY_CONN_ADD);
 629	}
 630
 631	hci_conn_init_sysfs(conn);
 632
 633	return conn;
 634}
 635
 636int hci_conn_del(struct hci_conn *conn)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 637{
 638	struct hci_dev *hdev = conn->hdev;
 639
 640	BT_DBG("%s hcon %p handle %d", hdev->name, conn, conn->handle);
 641
 
 
 642	cancel_delayed_work_sync(&conn->disc_work);
 643	cancel_delayed_work_sync(&conn->auto_accept_work);
 644	cancel_delayed_work_sync(&conn->idle_work);
 645
 646	if (conn->type == ACL_LINK) {
 647		struct hci_conn *sco = conn->link;
 648		if (sco)
 649			sco->link = NULL;
 650
 651		/* Unacked frames */
 652		hdev->acl_cnt += conn->sent;
 653	} else if (conn->type == LE_LINK) {
 654		cancel_delayed_work(&conn->le_conn_timeout);
 655
 656		if (hdev->le_pkts)
 657			hdev->le_cnt += conn->sent;
 658		else
 659			hdev->acl_cnt += conn->sent;
 660	} else {
 661		struct hci_conn *acl = conn->link;
 662		if (acl) {
 663			acl->link = NULL;
 664			hci_conn_drop(acl);
 
 
 
 
 665		}
 666	}
 667
 668	if (conn->amp_mgr)
 669		amp_mgr_put(conn->amp_mgr);
 670
 671	skb_queue_purge(&conn->data_q);
 672
 673	/* Remove the connection from the list and cleanup its remaining
 674	 * state. This is a separate function since for some cases like
 675	 * BT_CONNECT_SCAN we *only* want the cleanup part without the
 676	 * rest of hci_conn_del.
 677	 */
 678	hci_conn_cleanup(conn);
 679
 680	return 0;
 681}
 682
 683struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src, uint8_t src_type)
 684{
 685	int use_src = bacmp(src, BDADDR_ANY);
 686	struct hci_dev *hdev = NULL, *d;
 687
 688	BT_DBG("%pMR -> %pMR", src, dst);
 689
 690	read_lock(&hci_dev_list_lock);
 691
 692	list_for_each_entry(d, &hci_dev_list, list) {
 693		if (!test_bit(HCI_UP, &d->flags) ||
 694		    hci_dev_test_flag(d, HCI_USER_CHANNEL) ||
 695		    d->dev_type != HCI_PRIMARY)
 696			continue;
 697
 698		/* Simple routing:
 699		 *   No source address - find interface with bdaddr != dst
 700		 *   Source address    - find interface with bdaddr == src
 701		 */
 702
 703		if (use_src) {
 704			bdaddr_t id_addr;
 705			u8 id_addr_type;
 706
 707			if (src_type == BDADDR_BREDR) {
 708				if (!lmp_bredr_capable(d))
 709					continue;
 710				bacpy(&id_addr, &d->bdaddr);
 711				id_addr_type = BDADDR_BREDR;
 712			} else {
 713				if (!lmp_le_capable(d))
 714					continue;
 715
 716				hci_copy_identity_address(d, &id_addr,
 717							  &id_addr_type);
 718
 719				/* Convert from HCI to three-value type */
 720				if (id_addr_type == ADDR_LE_DEV_PUBLIC)
 721					id_addr_type = BDADDR_LE_PUBLIC;
 722				else
 723					id_addr_type = BDADDR_LE_RANDOM;
 724			}
 725
 726			if (!bacmp(&id_addr, src) && id_addr_type == src_type) {
 727				hdev = d; break;
 728			}
 729		} else {
 730			if (bacmp(&d->bdaddr, dst)) {
 731				hdev = d; break;
 732			}
 733		}
 734	}
 735
 736	if (hdev)
 737		hdev = hci_dev_hold(hdev);
 738
 739	read_unlock(&hci_dev_list_lock);
 740	return hdev;
 741}
 742EXPORT_SYMBOL(hci_get_route);
 743
 744/* This function requires the caller holds hdev->lock */
 745void hci_le_conn_failed(struct hci_conn *conn, u8 status)
 746{
 747	struct hci_dev *hdev = conn->hdev;
 748	struct hci_conn_params *params;
 749
 750	params = hci_pend_le_action_lookup(&hdev->pend_le_conns, &conn->dst,
 751					   conn->dst_type);
 752	if (params && params->conn) {
 753		hci_conn_drop(params->conn);
 754		hci_conn_put(params->conn);
 755		params->conn = NULL;
 756	}
 757
 758	conn->state = BT_CLOSED;
 759
 760	/* If the status indicates successful cancellation of
 761	 * the attempt (i.e. Unknown Connection Id) there's no point of
 762	 * notifying failure since we'll go back to keep trying to
 763	 * connect. The only exception is explicit connect requests
 764	 * where a timeout + cancel does indicate an actual failure.
 765	 */
 766	if (status != HCI_ERROR_UNKNOWN_CONN_ID ||
 767	    (params && params->explicit_connect))
 768		mgmt_connect_failed(hdev, &conn->dst, conn->type,
 769				    conn->dst_type, status);
 770
 771	hci_connect_cfm(conn, status);
 
 
 
 772
 773	hci_conn_del(conn);
 774
 775	/* The suspend notifier is waiting for all devices to disconnect and an
 776	 * LE connect cancel will result in an hci_le_conn_failed. Once the last
 777	 * connection is deleted, we should also wake the suspend queue to
 778	 * complete suspend operations.
 779	 */
 780	if (list_empty(&hdev->conn_hash.list) &&
 781	    test_and_clear_bit(SUSPEND_DISCONNECTING, hdev->suspend_tasks)) {
 782		wake_up(&hdev->suspend_wait_q);
 783	}
 784
 785	/* Since we may have temporarily stopped the background scanning in
 786	 * favor of connection establishment, we should restart it.
 787	 */
 788	hci_update_background_scan(hdev);
 
 789
 790	/* Re-enable advertising in case this was a failed connection
 791	 * attempt as a peripheral.
 792	 */
 793	hci_req_reenable_advertising(hdev);
 794}
 795
 796static void create_le_conn_complete(struct hci_dev *hdev, u8 status, u16 opcode)
 
 797{
 798	struct hci_conn *conn;
 799
 800	hci_dev_lock(hdev);
 801
 802	conn = hci_lookup_le_connect(hdev);
 803
 804	if (hdev->adv_instance_cnt)
 805		hci_req_resume_adv_instances(hdev);
 806
 807	if (!status) {
 808		hci_connect_le_scan_cleanup(conn);
 809		goto done;
 
 810	}
 811
 812	bt_dev_err(hdev, "request failed to create LE connection: "
 813		   "status 0x%2.2x", status);
 
 
 
 814
 815	if (!conn)
 816		goto done;
 817
 818	hci_le_conn_failed(conn, status);
 819
 820done:
 821	hci_dev_unlock(hdev);
 822}
 823
 824static bool conn_use_rpa(struct hci_conn *conn)
 825{
 826	struct hci_dev *hdev = conn->hdev;
 
 827
 828	return hci_dev_test_flag(hdev, HCI_PRIVACY);
 829}
 
 830
 831static void set_ext_conn_params(struct hci_conn *conn,
 832				struct hci_cp_le_ext_conn_param *p)
 833{
 834	struct hci_dev *hdev = conn->hdev;
 835
 836	memset(p, 0, sizeof(*p));
 837
 838	p->scan_interval = cpu_to_le16(hdev->le_scan_int_connect);
 839	p->scan_window = cpu_to_le16(hdev->le_scan_window_connect);
 840	p->conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
 841	p->conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
 842	p->conn_latency = cpu_to_le16(conn->le_conn_latency);
 843	p->supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
 844	p->min_ce_len = cpu_to_le16(0x0000);
 845	p->max_ce_len = cpu_to_le16(0x0000);
 846}
 847
 848static void hci_req_add_le_create_conn(struct hci_request *req,
 849				       struct hci_conn *conn,
 850				       bdaddr_t *direct_rpa)
 851{
 852	struct hci_dev *hdev = conn->hdev;
 853	u8 own_addr_type;
 854
 855	/* If direct address was provided we use it instead of current
 856	 * address.
 857	 */
 858	if (direct_rpa) {
 859		if (bacmp(&req->hdev->random_addr, direct_rpa))
 860			hci_req_add(req, HCI_OP_LE_SET_RANDOM_ADDR, 6,
 861								direct_rpa);
 862
 863		/* direct address is always RPA */
 864		own_addr_type = ADDR_LE_DEV_RANDOM;
 865	} else {
 866		/* Update random address, but set require_privacy to false so
 867		 * that we never connect with an non-resolvable address.
 868		 */
 869		if (hci_update_random_address(req, false, conn_use_rpa(conn),
 870					      &own_addr_type))
 871			return;
 872	}
 873
 874	if (use_ext_conn(hdev)) {
 875		struct hci_cp_le_ext_create_conn *cp;
 876		struct hci_cp_le_ext_conn_param *p;
 877		u8 data[sizeof(*cp) + sizeof(*p) * 3];
 878		u32 plen;
 879
 880		cp = (void *) data;
 881		p = (void *) cp->data;
 
 882
 883		memset(cp, 0, sizeof(*cp));
 884
 885		bacpy(&cp->peer_addr, &conn->dst);
 886		cp->peer_addr_type = conn->dst_type;
 887		cp->own_addr_type = own_addr_type;
 888
 889		plen = sizeof(*cp);
 890
 891		if (scan_1m(hdev)) {
 892			cp->phys |= LE_SCAN_PHY_1M;
 893			set_ext_conn_params(conn, p);
 894
 895			p++;
 896			plen += sizeof(*p);
 897		}
 898
 899		if (scan_2m(hdev)) {
 900			cp->phys |= LE_SCAN_PHY_2M;
 901			set_ext_conn_params(conn, p);
 902
 903			p++;
 904			plen += sizeof(*p);
 905		}
 906
 907		if (scan_coded(hdev)) {
 908			cp->phys |= LE_SCAN_PHY_CODED;
 909			set_ext_conn_params(conn, p);
 910
 911			plen += sizeof(*p);
 912		}
 913
 914		hci_req_add(req, HCI_OP_LE_EXT_CREATE_CONN, plen, data);
 915
 916	} else {
 917		struct hci_cp_le_create_conn cp;
 918
 919		memset(&cp, 0, sizeof(cp));
 920
 921		cp.scan_interval = cpu_to_le16(hdev->le_scan_int_connect);
 922		cp.scan_window = cpu_to_le16(hdev->le_scan_window_connect);
 923
 924		bacpy(&cp.peer_addr, &conn->dst);
 925		cp.peer_addr_type = conn->dst_type;
 926		cp.own_address_type = own_addr_type;
 927		cp.conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
 928		cp.conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
 929		cp.conn_latency = cpu_to_le16(conn->le_conn_latency);
 930		cp.supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
 931		cp.min_ce_len = cpu_to_le16(0x0000);
 932		cp.max_ce_len = cpu_to_le16(0x0000);
 933
 934		hci_req_add(req, HCI_OP_LE_CREATE_CONN, sizeof(cp), &cp);
 935	}
 936
 937	conn->state = BT_CONNECT;
 938	clear_bit(HCI_CONN_SCANNING, &conn->flags);
 939}
 940
 941static void hci_req_directed_advertising(struct hci_request *req,
 942					 struct hci_conn *conn)
 943{
 944	struct hci_dev *hdev = req->hdev;
 945	u8 own_addr_type;
 946	u8 enable;
 947
 948	if (ext_adv_capable(hdev)) {
 949		struct hci_cp_le_set_ext_adv_params cp;
 950		bdaddr_t random_addr;
 951
 952		/* Set require_privacy to false so that the remote device has a
 953		 * chance of identifying us.
 954		 */
 955		if (hci_get_random_address(hdev, false, conn_use_rpa(conn), NULL,
 956					   &own_addr_type, &random_addr) < 0)
 957			return;
 958
 959		memset(&cp, 0, sizeof(cp));
 960
 961		cp.evt_properties = cpu_to_le16(LE_LEGACY_ADV_DIRECT_IND);
 962		cp.own_addr_type = own_addr_type;
 963		cp.channel_map = hdev->le_adv_channel_map;
 964		cp.tx_power = HCI_TX_POWER_INVALID;
 965		cp.primary_phy = HCI_ADV_PHY_1M;
 966		cp.secondary_phy = HCI_ADV_PHY_1M;
 967		cp.handle = 0; /* Use instance 0 for directed adv */
 968		cp.own_addr_type = own_addr_type;
 969		cp.peer_addr_type = conn->dst_type;
 970		bacpy(&cp.peer_addr, &conn->dst);
 971
 972		/* As per Core Spec 5.2 Vol 2, PART E, Sec 7.8.53, for
 973		 * advertising_event_property LE_LEGACY_ADV_DIRECT_IND
 974		 * does not supports advertising data when the advertising set already
 975		 * contains some, the controller shall return erroc code 'Invalid
 976		 * HCI Command Parameters(0x12).
 977		 * So it is required to remove adv set for handle 0x00. since we use
 978		 * instance 0 for directed adv.
 979		 */
 980		__hci_req_remove_ext_adv_instance(req, cp.handle);
 981
 982		hci_req_add(req, HCI_OP_LE_SET_EXT_ADV_PARAMS, sizeof(cp), &cp);
 983
 984		if (own_addr_type == ADDR_LE_DEV_RANDOM &&
 985		    bacmp(&random_addr, BDADDR_ANY) &&
 986		    bacmp(&random_addr, &hdev->random_addr)) {
 987			struct hci_cp_le_set_adv_set_rand_addr cp;
 988
 989			memset(&cp, 0, sizeof(cp));
 990
 991			cp.handle = 0;
 992			bacpy(&cp.bdaddr, &random_addr);
 993
 994			hci_req_add(req,
 995				    HCI_OP_LE_SET_ADV_SET_RAND_ADDR,
 996				    sizeof(cp), &cp);
 997		}
 998
 999		__hci_req_enable_ext_advertising(req, 0x00);
1000	} else {
1001		struct hci_cp_le_set_adv_param cp;
1002
1003		/* Clear the HCI_LE_ADV bit temporarily so that the
1004		 * hci_update_random_address knows that it's safe to go ahead
1005		 * and write a new random address. The flag will be set back on
1006		 * as soon as the SET_ADV_ENABLE HCI command completes.
1007		 */
1008		hci_dev_clear_flag(hdev, HCI_LE_ADV);
1009
1010		/* Set require_privacy to false so that the remote device has a
1011		 * chance of identifying us.
1012		 */
1013		if (hci_update_random_address(req, false, conn_use_rpa(conn),
1014					      &own_addr_type) < 0)
1015			return;
1016
1017		memset(&cp, 0, sizeof(cp));
1018
1019		/* Some controllers might reject command if intervals are not
1020		 * within range for undirected advertising.
1021		 * BCM20702A0 is known to be affected by this.
1022		 */
1023		cp.min_interval = cpu_to_le16(0x0020);
1024		cp.max_interval = cpu_to_le16(0x0020);
1025
1026		cp.type = LE_ADV_DIRECT_IND;
1027		cp.own_address_type = own_addr_type;
1028		cp.direct_addr_type = conn->dst_type;
1029		bacpy(&cp.direct_addr, &conn->dst);
1030		cp.channel_map = hdev->le_adv_channel_map;
1031
1032		hci_req_add(req, HCI_OP_LE_SET_ADV_PARAM, sizeof(cp), &cp);
1033
1034		enable = 0x01;
1035		hci_req_add(req, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable),
1036			    &enable);
1037	}
1038
1039	conn->state = BT_CONNECT;
1040}
1041
1042struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
1043				u8 dst_type, u8 sec_level, u16 conn_timeout,
1044				u8 role, bdaddr_t *direct_rpa)
1045{
1046	struct hci_conn_params *params;
1047	struct hci_conn *conn;
1048	struct smp_irk *irk;
1049	struct hci_request req;
1050	int err;
1051
1052	/* This ensures that during disable le_scan address resolution
1053	 * will not be disabled if it is followed by le_create_conn
1054	 */
1055	bool rpa_le_conn = true;
1056
1057	/* Let's make sure that le is enabled.*/
1058	if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
1059		if (lmp_le_capable(hdev))
1060			return ERR_PTR(-ECONNREFUSED);
1061
1062		return ERR_PTR(-EOPNOTSUPP);
1063	}
1064
1065	/* Since the controller supports only one LE connection attempt at a
1066	 * time, we return -EBUSY if there is any connection attempt running.
1067	 */
1068	if (hci_lookup_le_connect(hdev))
1069		return ERR_PTR(-EBUSY);
1070
1071	/* If there's already a connection object but it's not in
1072	 * scanning state it means it must already be established, in
1073	 * which case we can't do anything else except report a failure
1074	 * to connect.
1075	 */
1076	conn = hci_conn_hash_lookup_le(hdev, dst, dst_type);
1077	if (conn && !test_bit(HCI_CONN_SCANNING, &conn->flags)) {
1078		return ERR_PTR(-EBUSY);
1079	}
1080
1081	/* When given an identity address with existing identity
1082	 * resolving key, the connection needs to be established
1083	 * to a resolvable random address.
1084	 *
1085	 * Storing the resolvable random address is required here
1086	 * to handle connection failures. The address will later
1087	 * be resolved back into the original identity address
1088	 * from the connect request.
1089	 */
1090	irk = hci_find_irk_by_addr(hdev, dst, dst_type);
1091	if (irk && bacmp(&irk->rpa, BDADDR_ANY)) {
1092		dst = &irk->rpa;
1093		dst_type = ADDR_LE_DEV_RANDOM;
 
 
 
 
 
1094	}
1095
1096	if (conn) {
1097		bacpy(&conn->dst, dst);
1098	} else {
1099		conn = hci_conn_add(hdev, LE_LINK, dst, role);
1100		if (!conn)
1101			return ERR_PTR(-ENOMEM);
1102		hci_conn_hold(conn);
1103		conn->pending_sec_level = sec_level;
1104	}
1105
1106	conn->dst_type = dst_type;
1107	conn->sec_level = BT_SECURITY_LOW;
1108	conn->conn_timeout = conn_timeout;
1109
1110	hci_req_init(&req, hdev);
1111
1112	/* Disable advertising if we're active. For central role
1113	 * connections most controllers will refuse to connect if
1114	 * advertising is enabled, and for peripheral role connections we
1115	 * anyway have to disable it in order to start directed
1116	 * advertising. Any registered advertisements will be
1117	 * re-enabled after the connection attempt is finished.
1118	 */
1119	if (hci_dev_test_flag(hdev, HCI_LE_ADV))
1120		__hci_req_pause_adv_instances(&req);
1121
1122	/* If requested to connect as peripheral use directed advertising */
1123	if (conn->role == HCI_ROLE_SLAVE) {
1124		/* If we're active scanning most controllers are unable
1125		 * to initiate advertising. Simply reject the attempt.
1126		 */
1127		if (hci_dev_test_flag(hdev, HCI_LE_SCAN) &&
1128		    hdev->le_scan_type == LE_SCAN_ACTIVE) {
1129			hci_req_purge(&req);
1130			hci_conn_del(conn);
1131			return ERR_PTR(-EBUSY);
1132		}
1133
1134		hci_req_directed_advertising(&req, conn);
1135		goto create_conn;
1136	}
1137
1138	params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
1139	if (params) {
1140		conn->le_conn_min_interval = params->conn_min_interval;
1141		conn->le_conn_max_interval = params->conn_max_interval;
1142		conn->le_conn_latency = params->conn_latency;
1143		conn->le_supv_timeout = params->supervision_timeout;
1144	} else {
1145		conn->le_conn_min_interval = hdev->le_conn_min_interval;
1146		conn->le_conn_max_interval = hdev->le_conn_max_interval;
1147		conn->le_conn_latency = hdev->le_conn_latency;
1148		conn->le_supv_timeout = hdev->le_supv_timeout;
1149	}
1150
1151	/* If controller is scanning, we stop it since some controllers are
1152	 * not able to scan and connect at the same time. Also set the
1153	 * HCI_LE_SCAN_INTERRUPTED flag so that the command complete
1154	 * handler for scan disabling knows to set the correct discovery
1155	 * state.
1156	 */
1157	if (hci_dev_test_flag(hdev, HCI_LE_SCAN)) {
1158		hci_req_add_le_scan_disable(&req, rpa_le_conn);
1159		hci_dev_set_flag(hdev, HCI_LE_SCAN_INTERRUPTED);
1160	}
1161
1162	hci_req_add_le_create_conn(&req, conn, direct_rpa);
1163
1164create_conn:
1165	err = hci_req_run(&req, create_le_conn_complete);
1166	if (err) {
1167		hci_conn_del(conn);
1168
1169		if (hdev->adv_instance_cnt)
1170			hci_req_resume_adv_instances(hdev);
1171
1172		return ERR_PTR(err);
1173	}
1174
1175	return conn;
1176}
1177
1178static bool is_connected(struct hci_dev *hdev, bdaddr_t *addr, u8 type)
1179{
1180	struct hci_conn *conn;
1181
1182	conn = hci_conn_hash_lookup_le(hdev, addr, type);
1183	if (!conn)
1184		return false;
1185
1186	if (conn->state != BT_CONNECTED)
1187		return false;
1188
1189	return true;
1190}
1191
1192/* This function requires the caller holds hdev->lock */
1193static int hci_explicit_conn_params_set(struct hci_dev *hdev,
1194					bdaddr_t *addr, u8 addr_type)
1195{
1196	struct hci_conn_params *params;
1197
1198	if (is_connected(hdev, addr, addr_type))
1199		return -EISCONN;
1200
1201	params = hci_conn_params_lookup(hdev, addr, addr_type);
1202	if (!params) {
1203		params = hci_conn_params_add(hdev, addr, addr_type);
1204		if (!params)
1205			return -ENOMEM;
1206
1207		/* If we created new params, mark them to be deleted in
1208		 * hci_connect_le_scan_cleanup. It's different case than
1209		 * existing disabled params, those will stay after cleanup.
1210		 */
1211		params->auto_connect = HCI_AUTO_CONN_EXPLICIT;
1212	}
1213
1214	/* We're trying to connect, so make sure params are at pend_le_conns */
1215	if (params->auto_connect == HCI_AUTO_CONN_DISABLED ||
1216	    params->auto_connect == HCI_AUTO_CONN_REPORT ||
1217	    params->auto_connect == HCI_AUTO_CONN_EXPLICIT) {
1218		list_del_init(&params->action);
1219		list_add(&params->action, &hdev->pend_le_conns);
1220	}
1221
1222	params->explicit_connect = true;
1223
1224	BT_DBG("addr %pMR (type %u) auto_connect %u", addr, addr_type,
1225	       params->auto_connect);
1226
1227	return 0;
1228}
1229
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1230/* This function requires the caller holds hdev->lock */
1231struct hci_conn *hci_connect_le_scan(struct hci_dev *hdev, bdaddr_t *dst,
1232				     u8 dst_type, u8 sec_level,
1233				     u16 conn_timeout,
1234				     enum conn_reasons conn_reason)
1235{
1236	struct hci_conn *conn;
1237
1238	/* Let's make sure that le is enabled.*/
1239	if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
1240		if (lmp_le_capable(hdev))
1241			return ERR_PTR(-ECONNREFUSED);
1242
1243		return ERR_PTR(-EOPNOTSUPP);
1244	}
1245
1246	/* Some devices send ATT messages as soon as the physical link is
1247	 * established. To be able to handle these ATT messages, the user-
1248	 * space first establishes the connection and then starts the pairing
1249	 * process.
1250	 *
1251	 * So if a hci_conn object already exists for the following connection
1252	 * attempt, we simply update pending_sec_level and auth_type fields
1253	 * and return the object found.
1254	 */
1255	conn = hci_conn_hash_lookup_le(hdev, dst, dst_type);
1256	if (conn) {
1257		if (conn->pending_sec_level < sec_level)
1258			conn->pending_sec_level = sec_level;
1259		goto done;
1260	}
1261
1262	BT_DBG("requesting refresh of dst_addr");
1263
1264	conn = hci_conn_add(hdev, LE_LINK, dst, HCI_ROLE_MASTER);
1265	if (!conn)
1266		return ERR_PTR(-ENOMEM);
1267
1268	if (hci_explicit_conn_params_set(hdev, dst, dst_type) < 0) {
1269		hci_conn_del(conn);
1270		return ERR_PTR(-EBUSY);
1271	}
1272
1273	conn->state = BT_CONNECT;
1274	set_bit(HCI_CONN_SCANNING, &conn->flags);
1275	conn->dst_type = dst_type;
1276	conn->sec_level = BT_SECURITY_LOW;
1277	conn->pending_sec_level = sec_level;
1278	conn->conn_timeout = conn_timeout;
1279	conn->conn_reason = conn_reason;
1280
1281	hci_update_background_scan(hdev);
1282
1283done:
1284	hci_conn_hold(conn);
1285	return conn;
1286}
1287
1288struct hci_conn *hci_connect_acl(struct hci_dev *hdev, bdaddr_t *dst,
1289				 u8 sec_level, u8 auth_type,
1290				 enum conn_reasons conn_reason)
1291{
1292	struct hci_conn *acl;
1293
1294	if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) {
1295		if (lmp_bredr_capable(hdev))
1296			return ERR_PTR(-ECONNREFUSED);
1297
1298		return ERR_PTR(-EOPNOTSUPP);
1299	}
1300
 
 
 
 
 
 
 
 
 
1301	acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst);
1302	if (!acl) {
1303		acl = hci_conn_add(hdev, ACL_LINK, dst, HCI_ROLE_MASTER);
1304		if (!acl)
1305			return ERR_PTR(-ENOMEM);
1306	}
1307
1308	hci_conn_hold(acl);
1309
1310	acl->conn_reason = conn_reason;
1311	if (acl->state == BT_OPEN || acl->state == BT_CLOSED) {
1312		acl->sec_level = BT_SECURITY_LOW;
1313		acl->pending_sec_level = sec_level;
1314		acl->auth_type = auth_type;
1315		hci_acl_create_connection(acl);
1316	}
1317
1318	return acl;
1319}
1320
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1321struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst,
1322				 __u16 setting)
1323{
1324	struct hci_conn *acl;
1325	struct hci_conn *sco;
 
1326
1327	acl = hci_connect_acl(hdev, dst, BT_SECURITY_LOW, HCI_AT_NO_BONDING,
1328			      CONN_REASON_SCO_CONNECT);
1329	if (IS_ERR(acl))
1330		return acl;
1331
1332	sco = hci_conn_hash_lookup_ba(hdev, type, dst);
1333	if (!sco) {
1334		sco = hci_conn_add(hdev, type, dst, HCI_ROLE_MASTER);
1335		if (!sco) {
1336			hci_conn_drop(acl);
1337			return ERR_PTR(-ENOMEM);
1338		}
1339	}
1340
1341	acl->link = sco;
1342	sco->link = acl;
1343
1344	hci_conn_hold(sco);
 
 
1345
1346	sco->setting = setting;
 
1347
1348	if (acl->state == BT_CONNECTED &&
1349	    (sco->state == BT_OPEN || sco->state == BT_CLOSED)) {
1350		set_bit(HCI_CONN_POWER_SAVE, &acl->flags);
1351		hci_conn_enter_active_mode(acl, BT_POWER_FORCE_ACTIVE_ON);
1352
1353		if (test_bit(HCI_CONN_MODE_CHANGE_PEND, &acl->flags)) {
1354			/* defer SCO setup until mode change completed */
1355			set_bit(HCI_CONN_SCO_SETUP_PEND, &acl->flags);
1356			return sco;
1357		}
1358
1359		hci_sco_setup(acl, 0x00);
1360	}
1361
1362	return sco;
1363}
1364
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1365/* Check link security requirement */
1366int hci_conn_check_link_mode(struct hci_conn *conn)
1367{
1368	BT_DBG("hcon %p", conn);
1369
1370	/* In Secure Connections Only mode, it is required that Secure
1371	 * Connections is used and the link is encrypted with AES-CCM
1372	 * using a P-256 authenticated combination key.
1373	 */
1374	if (hci_dev_test_flag(conn->hdev, HCI_SC_ONLY)) {
1375		if (!hci_conn_sc_enabled(conn) ||
1376		    !test_bit(HCI_CONN_AES_CCM, &conn->flags) ||
1377		    conn->key_type != HCI_LK_AUTH_COMBINATION_P256)
1378			return 0;
1379	}
1380
1381	 /* AES encryption is required for Level 4:
1382	  *
1383	  * BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C
1384	  * page 1319:
1385	  *
1386	  * 128-bit equivalent strength for link and encryption keys
1387	  * required using FIPS approved algorithms (E0 not allowed,
1388	  * SAFER+ not allowed, and P-192 not allowed; encryption key
1389	  * not shortened)
1390	  */
1391	if (conn->sec_level == BT_SECURITY_FIPS &&
1392	    !test_bit(HCI_CONN_AES_CCM, &conn->flags)) {
1393		bt_dev_err(conn->hdev,
1394			   "Invalid security: Missing AES-CCM usage");
1395		return 0;
1396	}
1397
1398	if (hci_conn_ssp_enabled(conn) &&
1399	    !test_bit(HCI_CONN_ENCRYPT, &conn->flags))
1400		return 0;
1401
1402	return 1;
1403}
1404
1405/* Authenticate remote device */
1406static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
1407{
1408	BT_DBG("hcon %p", conn);
1409
1410	if (conn->pending_sec_level > sec_level)
1411		sec_level = conn->pending_sec_level;
1412
1413	if (sec_level > conn->sec_level)
1414		conn->pending_sec_level = sec_level;
1415	else if (test_bit(HCI_CONN_AUTH, &conn->flags))
1416		return 1;
1417
1418	/* Make sure we preserve an existing MITM requirement*/
1419	auth_type |= (conn->auth_type & 0x01);
1420
1421	conn->auth_type = auth_type;
1422
1423	if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->flags)) {
1424		struct hci_cp_auth_requested cp;
1425
1426		cp.handle = cpu_to_le16(conn->handle);
1427		hci_send_cmd(conn->hdev, HCI_OP_AUTH_REQUESTED,
1428			     sizeof(cp), &cp);
1429
1430		/* If we're already encrypted set the REAUTH_PEND flag,
1431		 * otherwise set the ENCRYPT_PEND.
1432		 */
1433		if (test_bit(HCI_CONN_ENCRYPT, &conn->flags))
1434			set_bit(HCI_CONN_REAUTH_PEND, &conn->flags);
1435		else
1436			set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
1437	}
1438
1439	return 0;
1440}
1441
1442/* Encrypt the link */
1443static void hci_conn_encrypt(struct hci_conn *conn)
1444{
1445	BT_DBG("hcon %p", conn);
1446
1447	if (!test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags)) {
1448		struct hci_cp_set_conn_encrypt cp;
1449		cp.handle  = cpu_to_le16(conn->handle);
1450		cp.encrypt = 0x01;
1451		hci_send_cmd(conn->hdev, HCI_OP_SET_CONN_ENCRYPT, sizeof(cp),
1452			     &cp);
1453	}
1454}
1455
1456/* Enable security */
1457int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type,
1458		      bool initiator)
1459{
1460	BT_DBG("hcon %p", conn);
1461
1462	if (conn->type == LE_LINK)
1463		return smp_conn_security(conn, sec_level);
1464
1465	/* For sdp we don't need the link key. */
1466	if (sec_level == BT_SECURITY_SDP)
1467		return 1;
1468
1469	/* For non 2.1 devices and low security level we don't need the link
1470	   key. */
1471	if (sec_level == BT_SECURITY_LOW && !hci_conn_ssp_enabled(conn))
1472		return 1;
1473
1474	/* For other security levels we need the link key. */
1475	if (!test_bit(HCI_CONN_AUTH, &conn->flags))
1476		goto auth;
1477
1478	/* An authenticated FIPS approved combination key has sufficient
1479	 * security for security level 4. */
1480	if (conn->key_type == HCI_LK_AUTH_COMBINATION_P256 &&
1481	    sec_level == BT_SECURITY_FIPS)
1482		goto encrypt;
1483
1484	/* An authenticated combination key has sufficient security for
1485	   security level 3. */
1486	if ((conn->key_type == HCI_LK_AUTH_COMBINATION_P192 ||
1487	     conn->key_type == HCI_LK_AUTH_COMBINATION_P256) &&
1488	    sec_level == BT_SECURITY_HIGH)
1489		goto encrypt;
1490
1491	/* An unauthenticated combination key has sufficient security for
1492	   security level 1 and 2. */
1493	if ((conn->key_type == HCI_LK_UNAUTH_COMBINATION_P192 ||
1494	     conn->key_type == HCI_LK_UNAUTH_COMBINATION_P256) &&
1495	    (sec_level == BT_SECURITY_MEDIUM || sec_level == BT_SECURITY_LOW))
1496		goto encrypt;
1497
1498	/* A combination key has always sufficient security for the security
1499	   levels 1 or 2. High security level requires the combination key
1500	   is generated using maximum PIN code length (16).
1501	   For pre 2.1 units. */
1502	if (conn->key_type == HCI_LK_COMBINATION &&
1503	    (sec_level == BT_SECURITY_MEDIUM || sec_level == BT_SECURITY_LOW ||
1504	     conn->pin_length == 16))
1505		goto encrypt;
 
 
 
 
 
 
 
1506
1507auth:
1508	if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags))
1509		return 0;
1510
1511	if (initiator)
1512		set_bit(HCI_CONN_AUTH_INITIATOR, &conn->flags);
1513
1514	if (!hci_conn_auth(conn, sec_level, auth_type))
1515		return 0;
1516
1517encrypt:
1518	if (test_bit(HCI_CONN_ENCRYPT, &conn->flags)) {
1519		/* Ensure that the encryption key size has been read,
1520		 * otherwise stall the upper layer responses.
1521		 */
1522		if (!conn->enc_key_size)
1523			return 0;
1524
1525		/* Nothing else needed, all requirements are met */
1526		return 1;
1527	}
1528
1529	hci_conn_encrypt(conn);
1530	return 0;
1531}
1532EXPORT_SYMBOL(hci_conn_security);
1533
1534/* Check secure link requirement */
1535int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level)
1536{
1537	BT_DBG("hcon %p", conn);
1538
1539	/* Accept if non-secure or higher security level is required */
1540	if (sec_level != BT_SECURITY_HIGH && sec_level != BT_SECURITY_FIPS)
1541		return 1;
1542
1543	/* Accept if secure or higher security level is already present */
1544	if (conn->sec_level == BT_SECURITY_HIGH ||
1545	    conn->sec_level == BT_SECURITY_FIPS)
1546		return 1;
1547
1548	/* Reject not secure link */
1549	return 0;
1550}
1551EXPORT_SYMBOL(hci_conn_check_secure);
1552
1553/* Switch role */
1554int hci_conn_switch_role(struct hci_conn *conn, __u8 role)
1555{
1556	BT_DBG("hcon %p", conn);
1557
1558	if (role == conn->role)
1559		return 1;
1560
1561	if (!test_and_set_bit(HCI_CONN_RSWITCH_PEND, &conn->flags)) {
1562		struct hci_cp_switch_role cp;
1563		bacpy(&cp.bdaddr, &conn->dst);
1564		cp.role = role;
1565		hci_send_cmd(conn->hdev, HCI_OP_SWITCH_ROLE, sizeof(cp), &cp);
1566	}
1567
1568	return 0;
1569}
1570EXPORT_SYMBOL(hci_conn_switch_role);
1571
1572/* Enter active mode */
1573void hci_conn_enter_active_mode(struct hci_conn *conn, __u8 force_active)
1574{
1575	struct hci_dev *hdev = conn->hdev;
1576
1577	BT_DBG("hcon %p mode %d", conn, conn->mode);
1578
1579	if (conn->mode != HCI_CM_SNIFF)
1580		goto timer;
1581
1582	if (!test_bit(HCI_CONN_POWER_SAVE, &conn->flags) && !force_active)
1583		goto timer;
1584
1585	if (!test_and_set_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags)) {
1586		struct hci_cp_exit_sniff_mode cp;
1587		cp.handle = cpu_to_le16(conn->handle);
1588		hci_send_cmd(hdev, HCI_OP_EXIT_SNIFF_MODE, sizeof(cp), &cp);
1589	}
1590
1591timer:
1592	if (hdev->idle_timeout > 0)
1593		queue_delayed_work(hdev->workqueue, &conn->idle_work,
1594				   msecs_to_jiffies(hdev->idle_timeout));
1595}
1596
1597/* Drop all connection on the device */
1598void hci_conn_hash_flush(struct hci_dev *hdev)
1599{
1600	struct hci_conn_hash *h = &hdev->conn_hash;
1601	struct hci_conn *c, *n;
1602
1603	BT_DBG("hdev %s", hdev->name);
1604
1605	list_for_each_entry_safe(c, n, &h->list, list) {
1606		c->state = BT_CLOSED;
1607
1608		hci_disconn_cfm(c, HCI_ERROR_LOCAL_HOST_TERM);
1609		hci_conn_del(c);
 
 
 
 
 
1610	}
1611}
1612
1613/* Check pending connect attempts */
1614void hci_conn_check_pending(struct hci_dev *hdev)
1615{
1616	struct hci_conn *conn;
1617
1618	BT_DBG("hdev %s", hdev->name);
1619
1620	hci_dev_lock(hdev);
1621
1622	conn = hci_conn_hash_lookup_state(hdev, ACL_LINK, BT_CONNECT2);
1623	if (conn)
1624		hci_acl_create_connection(conn);
1625
1626	hci_dev_unlock(hdev);
1627}
1628
1629static u32 get_link_mode(struct hci_conn *conn)
1630{
1631	u32 link_mode = 0;
1632
1633	if (conn->role == HCI_ROLE_MASTER)
1634		link_mode |= HCI_LM_MASTER;
1635
1636	if (test_bit(HCI_CONN_ENCRYPT, &conn->flags))
1637		link_mode |= HCI_LM_ENCRYPT;
1638
1639	if (test_bit(HCI_CONN_AUTH, &conn->flags))
1640		link_mode |= HCI_LM_AUTH;
1641
1642	if (test_bit(HCI_CONN_SECURE, &conn->flags))
1643		link_mode |= HCI_LM_SECURE;
1644
1645	if (test_bit(HCI_CONN_FIPS, &conn->flags))
1646		link_mode |= HCI_LM_FIPS;
1647
1648	return link_mode;
1649}
1650
1651int hci_get_conn_list(void __user *arg)
1652{
1653	struct hci_conn *c;
1654	struct hci_conn_list_req req, *cl;
1655	struct hci_conn_info *ci;
1656	struct hci_dev *hdev;
1657	int n = 0, size, err;
1658
1659	if (copy_from_user(&req, arg, sizeof(req)))
1660		return -EFAULT;
1661
1662	if (!req.conn_num || req.conn_num > (PAGE_SIZE * 2) / sizeof(*ci))
1663		return -EINVAL;
1664
1665	size = sizeof(req) + req.conn_num * sizeof(*ci);
1666
1667	cl = kmalloc(size, GFP_KERNEL);
1668	if (!cl)
1669		return -ENOMEM;
1670
1671	hdev = hci_dev_get(req.dev_id);
1672	if (!hdev) {
1673		kfree(cl);
1674		return -ENODEV;
1675	}
1676
1677	ci = cl->conn_info;
1678
1679	hci_dev_lock(hdev);
1680	list_for_each_entry(c, &hdev->conn_hash.list, list) {
1681		bacpy(&(ci + n)->bdaddr, &c->dst);
1682		(ci + n)->handle = c->handle;
1683		(ci + n)->type  = c->type;
1684		(ci + n)->out   = c->out;
1685		(ci + n)->state = c->state;
1686		(ci + n)->link_mode = get_link_mode(c);
1687		if (++n >= req.conn_num)
1688			break;
1689	}
1690	hci_dev_unlock(hdev);
1691
1692	cl->dev_id = hdev->id;
1693	cl->conn_num = n;
1694	size = sizeof(req) + n * sizeof(*ci);
1695
1696	hci_dev_put(hdev);
1697
1698	err = copy_to_user(arg, cl, size);
1699	kfree(cl);
1700
1701	return err ? -EFAULT : 0;
1702}
1703
1704int hci_get_conn_info(struct hci_dev *hdev, void __user *arg)
1705{
1706	struct hci_conn_info_req req;
1707	struct hci_conn_info ci;
1708	struct hci_conn *conn;
1709	char __user *ptr = arg + sizeof(req);
1710
1711	if (copy_from_user(&req, arg, sizeof(req)))
1712		return -EFAULT;
1713
1714	hci_dev_lock(hdev);
1715	conn = hci_conn_hash_lookup_ba(hdev, req.type, &req.bdaddr);
1716	if (conn) {
1717		bacpy(&ci.bdaddr, &conn->dst);
1718		ci.handle = conn->handle;
1719		ci.type  = conn->type;
1720		ci.out   = conn->out;
1721		ci.state = conn->state;
1722		ci.link_mode = get_link_mode(conn);
1723	}
1724	hci_dev_unlock(hdev);
1725
1726	if (!conn)
1727		return -ENOENT;
1728
1729	return copy_to_user(ptr, &ci, sizeof(ci)) ? -EFAULT : 0;
1730}
1731
1732int hci_get_auth_info(struct hci_dev *hdev, void __user *arg)
1733{
1734	struct hci_auth_info_req req;
1735	struct hci_conn *conn;
1736
1737	if (copy_from_user(&req, arg, sizeof(req)))
1738		return -EFAULT;
1739
1740	hci_dev_lock(hdev);
1741	conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &req.bdaddr);
1742	if (conn)
1743		req.type = conn->auth_type;
1744	hci_dev_unlock(hdev);
1745
1746	if (!conn)
1747		return -ENOENT;
1748
1749	return copy_to_user(arg, &req, sizeof(req)) ? -EFAULT : 0;
1750}
1751
1752struct hci_chan *hci_chan_create(struct hci_conn *conn)
1753{
1754	struct hci_dev *hdev = conn->hdev;
1755	struct hci_chan *chan;
1756
1757	BT_DBG("%s hcon %p", hdev->name, conn);
1758
1759	if (test_bit(HCI_CONN_DROP, &conn->flags)) {
1760		BT_DBG("Refusing to create new hci_chan");
1761		return NULL;
1762	}
1763
1764	chan = kzalloc(sizeof(*chan), GFP_KERNEL);
1765	if (!chan)
1766		return NULL;
1767
1768	chan->conn = hci_conn_get(conn);
1769	skb_queue_head_init(&chan->data_q);
1770	chan->state = BT_CONNECTED;
1771
1772	list_add_rcu(&chan->list, &conn->chan_list);
1773
1774	return chan;
1775}
1776
1777void hci_chan_del(struct hci_chan *chan)
1778{
1779	struct hci_conn *conn = chan->conn;
1780	struct hci_dev *hdev = conn->hdev;
1781
1782	BT_DBG("%s hcon %p chan %p", hdev->name, conn, chan);
1783
1784	list_del_rcu(&chan->list);
1785
1786	synchronize_rcu();
1787
1788	/* Prevent new hci_chan's to be created for this hci_conn */
1789	set_bit(HCI_CONN_DROP, &conn->flags);
1790
1791	hci_conn_put(conn);
1792
1793	skb_queue_purge(&chan->data_q);
1794	kfree(chan);
1795}
1796
1797void hci_chan_list_flush(struct hci_conn *conn)
1798{
1799	struct hci_chan *chan, *n;
1800
1801	BT_DBG("hcon %p", conn);
1802
1803	list_for_each_entry_safe(chan, n, &conn->chan_list, list)
1804		hci_chan_del(chan);
1805}
1806
1807static struct hci_chan *__hci_chan_lookup_handle(struct hci_conn *hcon,
1808						 __u16 handle)
1809{
1810	struct hci_chan *hchan;
1811
1812	list_for_each_entry(hchan, &hcon->chan_list, list) {
1813		if (hchan->handle == handle)
1814			return hchan;
1815	}
1816
1817	return NULL;
1818}
1819
1820struct hci_chan *hci_chan_lookup_handle(struct hci_dev *hdev, __u16 handle)
1821{
1822	struct hci_conn_hash *h = &hdev->conn_hash;
1823	struct hci_conn *hcon;
1824	struct hci_chan *hchan = NULL;
1825
1826	rcu_read_lock();
1827
1828	list_for_each_entry_rcu(hcon, &h->list, list) {
1829		hchan = __hci_chan_lookup_handle(hcon, handle);
1830		if (hchan)
1831			break;
1832	}
1833
1834	rcu_read_unlock();
1835
1836	return hchan;
1837}
1838
1839u32 hci_conn_get_phy(struct hci_conn *conn)
1840{
1841	u32 phys = 0;
1842
1843	/* BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 2, Part B page 471:
1844	 * Table 6.2: Packets defined for synchronous, asynchronous, and
1845	 * CPB logical transport types.
1846	 */
1847	switch (conn->type) {
1848	case SCO_LINK:
1849		/* SCO logical transport (1 Mb/s):
1850		 * HV1, HV2, HV3 and DV.
1851		 */
1852		phys |= BT_PHY_BR_1M_1SLOT;
1853
1854		break;
1855
1856	case ACL_LINK:
1857		/* ACL logical transport (1 Mb/s) ptt=0:
1858		 * DH1, DM3, DH3, DM5 and DH5.
1859		 */
1860		phys |= BT_PHY_BR_1M_1SLOT;
1861
1862		if (conn->pkt_type & (HCI_DM3 | HCI_DH3))
1863			phys |= BT_PHY_BR_1M_3SLOT;
1864
1865		if (conn->pkt_type & (HCI_DM5 | HCI_DH5))
1866			phys |= BT_PHY_BR_1M_5SLOT;
1867
1868		/* ACL logical transport (2 Mb/s) ptt=1:
1869		 * 2-DH1, 2-DH3 and 2-DH5.
1870		 */
1871		if (!(conn->pkt_type & HCI_2DH1))
1872			phys |= BT_PHY_EDR_2M_1SLOT;
1873
1874		if (!(conn->pkt_type & HCI_2DH3))
1875			phys |= BT_PHY_EDR_2M_3SLOT;
1876
1877		if (!(conn->pkt_type & HCI_2DH5))
1878			phys |= BT_PHY_EDR_2M_5SLOT;
1879
1880		/* ACL logical transport (3 Mb/s) ptt=1:
1881		 * 3-DH1, 3-DH3 and 3-DH5.
1882		 */
1883		if (!(conn->pkt_type & HCI_3DH1))
1884			phys |= BT_PHY_EDR_3M_1SLOT;
1885
1886		if (!(conn->pkt_type & HCI_3DH3))
1887			phys |= BT_PHY_EDR_3M_3SLOT;
1888
1889		if (!(conn->pkt_type & HCI_3DH5))
1890			phys |= BT_PHY_EDR_3M_5SLOT;
1891
1892		break;
1893
1894	case ESCO_LINK:
1895		/* eSCO logical transport (1 Mb/s): EV3, EV4 and EV5 */
1896		phys |= BT_PHY_BR_1M_1SLOT;
1897
1898		if (!(conn->pkt_type & (ESCO_EV4 | ESCO_EV5)))
1899			phys |= BT_PHY_BR_1M_3SLOT;
1900
1901		/* eSCO logical transport (2 Mb/s): 2-EV3, 2-EV5 */
1902		if (!(conn->pkt_type & ESCO_2EV3))
1903			phys |= BT_PHY_EDR_2M_1SLOT;
1904
1905		if (!(conn->pkt_type & ESCO_2EV5))
1906			phys |= BT_PHY_EDR_2M_3SLOT;
1907
1908		/* eSCO logical transport (3 Mb/s): 3-EV3, 3-EV5 */
1909		if (!(conn->pkt_type & ESCO_3EV3))
1910			phys |= BT_PHY_EDR_3M_1SLOT;
1911
1912		if (!(conn->pkt_type & ESCO_3EV5))
1913			phys |= BT_PHY_EDR_3M_3SLOT;
1914
1915		break;
1916
1917	case LE_LINK:
1918		if (conn->le_tx_phy & HCI_LE_SET_PHY_1M)
1919			phys |= BT_PHY_LE_1M_TX;
1920
1921		if (conn->le_rx_phy & HCI_LE_SET_PHY_1M)
1922			phys |= BT_PHY_LE_1M_RX;
1923
1924		if (conn->le_tx_phy & HCI_LE_SET_PHY_2M)
1925			phys |= BT_PHY_LE_2M_TX;
1926
1927		if (conn->le_rx_phy & HCI_LE_SET_PHY_2M)
1928			phys |= BT_PHY_LE_2M_RX;
1929
1930		if (conn->le_tx_phy & HCI_LE_SET_PHY_CODED)
1931			phys |= BT_PHY_LE_CODED_TX;
1932
1933		if (conn->le_rx_phy & HCI_LE_SET_PHY_CODED)
1934			phys |= BT_PHY_LE_CODED_RX;
1935
1936		break;
1937	}
1938
1939	return phys;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1940}