Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Driver core for Samsung SoC onboard UARTs.
4 *
5 * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
6 * http://armlinux.simtec.co.uk/
7 */
8
9/* Note on 2410 error handling
10 *
11 * The s3c2410 manual has a love/hate affair with the contents of the
12 * UERSTAT register in the UART blocks, and keeps marking some of the
13 * error bits as reserved. Having checked with the s3c2410x01,
14 * it copes with BREAKs properly, so I am happy to ignore the RESERVED
15 * feature from the latter versions of the manual.
16 *
17 * If it becomes aparrent that latter versions of the 2410 remove these
18 * bits, then action will have to be taken to differentiate the versions
19 * and change the policy on BREAK
20 *
21 * BJD, 04-Nov-2004
22 */
23
24#include <linux/dmaengine.h>
25#include <linux/dma-mapping.h>
26#include <linux/slab.h>
27#include <linux/math.h>
28#include <linux/module.h>
29#include <linux/ioport.h>
30#include <linux/io.h>
31#include <linux/platform_device.h>
32#include <linux/init.h>
33#include <linux/sysrq.h>
34#include <linux/console.h>
35#include <linux/tty.h>
36#include <linux/tty_flip.h>
37#include <linux/serial_core.h>
38#include <linux/serial.h>
39#include <linux/serial_s3c.h>
40#include <linux/delay.h>
41#include <linux/clk.h>
42#include <linux/cpufreq.h>
43#include <linux/of.h>
44#include <asm/irq.h>
45
46/* UART name and device definitions */
47
48#define S3C24XX_SERIAL_NAME "ttySAC"
49#define S3C24XX_SERIAL_MAJOR 204
50#define S3C24XX_SERIAL_MINOR 64
51
52#ifdef CONFIG_ARM64
53#define UART_NR 12
54#else
55#define UART_NR CONFIG_SERIAL_SAMSUNG_UARTS
56#endif
57
58#define S3C24XX_TX_PIO 1
59#define S3C24XX_TX_DMA 2
60#define S3C24XX_RX_PIO 1
61#define S3C24XX_RX_DMA 2
62
63/* flag to ignore all characters coming in */
64#define RXSTAT_DUMMY_READ (0x10000000)
65
66enum s3c24xx_port_type {
67 TYPE_S3C6400,
68 TYPE_APPLE_S5L,
69};
70
71struct s3c24xx_uart_info {
72 const char *name;
73 enum s3c24xx_port_type type;
74 unsigned int port_type;
75 unsigned int fifosize;
76 unsigned long rx_fifomask;
77 unsigned long rx_fifoshift;
78 unsigned long rx_fifofull;
79 unsigned long tx_fifomask;
80 unsigned long tx_fifoshift;
81 unsigned long tx_fifofull;
82 unsigned int def_clk_sel;
83 unsigned long num_clks;
84 unsigned long clksel_mask;
85 unsigned long clksel_shift;
86 unsigned long ucon_mask;
87
88 /* uart port features */
89
90 unsigned int has_divslot:1;
91};
92
93struct s3c24xx_serial_drv_data {
94 const struct s3c24xx_uart_info info;
95 const struct s3c2410_uartcfg def_cfg;
96 const unsigned int fifosize[UART_NR];
97};
98
99struct s3c24xx_uart_dma {
100 unsigned int rx_chan_id;
101 unsigned int tx_chan_id;
102
103 struct dma_slave_config rx_conf;
104 struct dma_slave_config tx_conf;
105
106 struct dma_chan *rx_chan;
107 struct dma_chan *tx_chan;
108
109 dma_addr_t rx_addr;
110 dma_addr_t tx_addr;
111
112 dma_cookie_t rx_cookie;
113 dma_cookie_t tx_cookie;
114
115 char *rx_buf;
116
117 dma_addr_t tx_transfer_addr;
118
119 size_t rx_size;
120 size_t tx_size;
121
122 struct dma_async_tx_descriptor *tx_desc;
123 struct dma_async_tx_descriptor *rx_desc;
124
125 int tx_bytes_requested;
126 int rx_bytes_requested;
127};
128
129struct s3c24xx_uart_port {
130 unsigned char rx_enabled;
131 unsigned char tx_enabled;
132 unsigned int pm_level;
133 unsigned long baudclk_rate;
134 unsigned int min_dma_size;
135
136 unsigned int rx_irq;
137 unsigned int tx_irq;
138
139 unsigned int tx_in_progress;
140 unsigned int tx_mode;
141 unsigned int rx_mode;
142
143 const struct s3c24xx_uart_info *info;
144 struct clk *clk;
145 struct clk *baudclk;
146 struct uart_port port;
147 const struct s3c24xx_serial_drv_data *drv_data;
148
149 /* reference to platform data */
150 const struct s3c2410_uartcfg *cfg;
151
152 struct s3c24xx_uart_dma *dma;
153};
154
155static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport);
156
157/* conversion functions */
158
159#define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev)
160
161/* register access controls */
162
163#define portaddr(port, reg) ((port)->membase + (reg))
164#define portaddrl(port, reg) \
165 ((unsigned long *)(unsigned long)((port)->membase + (reg)))
166
167static u32 rd_reg(const struct uart_port *port, u32 reg)
168{
169 switch (port->iotype) {
170 case UPIO_MEM:
171 return readb_relaxed(portaddr(port, reg));
172 case UPIO_MEM32:
173 return readl_relaxed(portaddr(port, reg));
174 default:
175 return 0;
176 }
177 return 0;
178}
179
180#define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
181
182static void wr_reg(const struct uart_port *port, u32 reg, u32 val)
183{
184 switch (port->iotype) {
185 case UPIO_MEM:
186 writeb_relaxed(val, portaddr(port, reg));
187 break;
188 case UPIO_MEM32:
189 writel_relaxed(val, portaddr(port, reg));
190 break;
191 }
192}
193
194#define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
195
196/* Byte-order aware bit setting/clearing functions. */
197
198static inline void s3c24xx_set_bit(const struct uart_port *port, int idx,
199 unsigned int reg)
200{
201 unsigned long flags;
202 u32 val;
203
204 local_irq_save(flags);
205 val = rd_regl(port, reg);
206 val |= (1 << idx);
207 wr_regl(port, reg, val);
208 local_irq_restore(flags);
209}
210
211static inline void s3c24xx_clear_bit(const struct uart_port *port, int idx,
212 unsigned int reg)
213{
214 unsigned long flags;
215 u32 val;
216
217 local_irq_save(flags);
218 val = rd_regl(port, reg);
219 val &= ~(1 << idx);
220 wr_regl(port, reg, val);
221 local_irq_restore(flags);
222}
223
224static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
225{
226 return container_of(port, struct s3c24xx_uart_port, port);
227}
228
229/* translate a port to the device name */
230
231static inline const char *s3c24xx_serial_portname(const struct uart_port *port)
232{
233 return to_platform_device(port->dev)->name;
234}
235
236static int s3c24xx_serial_txempty_nofifo(const struct uart_port *port)
237{
238 return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE;
239}
240
241static void s3c24xx_serial_rx_enable(struct uart_port *port)
242{
243 struct s3c24xx_uart_port *ourport = to_ourport(port);
244 unsigned long flags;
245 unsigned int ucon, ufcon;
246 int count = 10000;
247
248 uart_port_lock_irqsave(port, &flags);
249
250 while (--count && !s3c24xx_serial_txempty_nofifo(port))
251 udelay(100);
252
253 ufcon = rd_regl(port, S3C2410_UFCON);
254 ufcon |= S3C2410_UFCON_RESETRX;
255 wr_regl(port, S3C2410_UFCON, ufcon);
256
257 ucon = rd_regl(port, S3C2410_UCON);
258 ucon |= S3C2410_UCON_RXIRQMODE;
259 wr_regl(port, S3C2410_UCON, ucon);
260
261 ourport->rx_enabled = 1;
262 uart_port_unlock_irqrestore(port, flags);
263}
264
265static void s3c24xx_serial_rx_disable(struct uart_port *port)
266{
267 struct s3c24xx_uart_port *ourport = to_ourport(port);
268 unsigned long flags;
269 unsigned int ucon;
270
271 uart_port_lock_irqsave(port, &flags);
272
273 ucon = rd_regl(port, S3C2410_UCON);
274 ucon &= ~S3C2410_UCON_RXIRQMODE;
275 wr_regl(port, S3C2410_UCON, ucon);
276
277 ourport->rx_enabled = 0;
278 uart_port_unlock_irqrestore(port, flags);
279}
280
281static void s3c24xx_serial_stop_tx(struct uart_port *port)
282{
283 struct s3c24xx_uart_port *ourport = to_ourport(port);
284 struct s3c24xx_uart_dma *dma = ourport->dma;
285 struct dma_tx_state state;
286 int count;
287
288 if (!ourport->tx_enabled)
289 return;
290
291 switch (ourport->info->type) {
292 case TYPE_S3C6400:
293 s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
294 break;
295 case TYPE_APPLE_S5L:
296 s3c24xx_clear_bit(port, APPLE_S5L_UCON_TXTHRESH_ENA, S3C2410_UCON);
297 break;
298 default:
299 disable_irq_nosync(ourport->tx_irq);
300 break;
301 }
302
303 if (dma && dma->tx_chan && ourport->tx_in_progress == S3C24XX_TX_DMA) {
304 dmaengine_pause(dma->tx_chan);
305 dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
306 dmaengine_terminate_all(dma->tx_chan);
307 dma_sync_single_for_cpu(dma->tx_chan->device->dev,
308 dma->tx_transfer_addr, dma->tx_size,
309 DMA_TO_DEVICE);
310 async_tx_ack(dma->tx_desc);
311 count = dma->tx_bytes_requested - state.residue;
312 uart_xmit_advance(port, count);
313 }
314
315 ourport->tx_enabled = 0;
316 ourport->tx_in_progress = 0;
317
318 if (port->flags & UPF_CONS_FLOW)
319 s3c24xx_serial_rx_enable(port);
320
321 ourport->tx_mode = 0;
322}
323
324static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport);
325
326static void s3c24xx_serial_tx_dma_complete(void *args)
327{
328 struct s3c24xx_uart_port *ourport = args;
329 struct uart_port *port = &ourport->port;
330 struct circ_buf *xmit = &port->state->xmit;
331 struct s3c24xx_uart_dma *dma = ourport->dma;
332 struct dma_tx_state state;
333 unsigned long flags;
334 int count;
335
336 dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
337 count = dma->tx_bytes_requested - state.residue;
338 async_tx_ack(dma->tx_desc);
339
340 dma_sync_single_for_cpu(dma->tx_chan->device->dev,
341 dma->tx_transfer_addr, dma->tx_size,
342 DMA_TO_DEVICE);
343
344 uart_port_lock_irqsave(port, &flags);
345
346 uart_xmit_advance(port, count);
347 ourport->tx_in_progress = 0;
348
349 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
350 uart_write_wakeup(port);
351
352 s3c24xx_serial_start_next_tx(ourport);
353 uart_port_unlock_irqrestore(port, flags);
354}
355
356static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
357{
358 const struct uart_port *port = &ourport->port;
359 u32 ucon;
360
361 /* Mask Tx interrupt */
362 switch (ourport->info->type) {
363 case TYPE_S3C6400:
364 s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
365 break;
366 case TYPE_APPLE_S5L:
367 WARN_ON(1); // No DMA
368 break;
369 default:
370 disable_irq_nosync(ourport->tx_irq);
371 break;
372 }
373
374 /* Enable tx dma mode */
375 ucon = rd_regl(port, S3C2410_UCON);
376 ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK);
377 ucon |= S3C64XX_UCON_TXBURST_1;
378 ucon |= S3C64XX_UCON_TXMODE_DMA;
379 wr_regl(port, S3C2410_UCON, ucon);
380
381 ourport->tx_mode = S3C24XX_TX_DMA;
382}
383
384static void enable_tx_pio(struct s3c24xx_uart_port *ourport)
385{
386 const struct uart_port *port = &ourport->port;
387 u32 ucon, ufcon;
388
389 /* Set ufcon txtrig */
390 ourport->tx_in_progress = S3C24XX_TX_PIO;
391 ufcon = rd_regl(port, S3C2410_UFCON);
392 wr_regl(port, S3C2410_UFCON, ufcon);
393
394 /* Enable tx pio mode */
395 ucon = rd_regl(port, S3C2410_UCON);
396 ucon &= ~(S3C64XX_UCON_TXMODE_MASK);
397 ucon |= S3C64XX_UCON_TXMODE_CPU;
398 wr_regl(port, S3C2410_UCON, ucon);
399
400 /* Unmask Tx interrupt */
401 switch (ourport->info->type) {
402 case TYPE_S3C6400:
403 s3c24xx_clear_bit(port, S3C64XX_UINTM_TXD,
404 S3C64XX_UINTM);
405 break;
406 case TYPE_APPLE_S5L:
407 ucon |= APPLE_S5L_UCON_TXTHRESH_ENA_MSK;
408 wr_regl(port, S3C2410_UCON, ucon);
409 break;
410 default:
411 enable_irq(ourport->tx_irq);
412 break;
413 }
414
415 ourport->tx_mode = S3C24XX_TX_PIO;
416
417 /*
418 * The Apple version only has edge triggered TX IRQs, so we need
419 * to kick off the process by sending some characters here.
420 */
421 if (ourport->info->type == TYPE_APPLE_S5L)
422 s3c24xx_serial_tx_chars(ourport);
423}
424
425static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport)
426{
427 if (ourport->tx_mode != S3C24XX_TX_PIO)
428 enable_tx_pio(ourport);
429}
430
431static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport,
432 unsigned int count)
433{
434 struct uart_port *port = &ourport->port;
435 struct circ_buf *xmit = &port->state->xmit;
436 struct s3c24xx_uart_dma *dma = ourport->dma;
437
438 if (ourport->tx_mode != S3C24XX_TX_DMA)
439 enable_tx_dma(ourport);
440
441 dma->tx_size = count & ~(dma_get_cache_alignment() - 1);
442 dma->tx_transfer_addr = dma->tx_addr + xmit->tail;
443
444 dma_sync_single_for_device(dma->tx_chan->device->dev,
445 dma->tx_transfer_addr, dma->tx_size,
446 DMA_TO_DEVICE);
447
448 dma->tx_desc = dmaengine_prep_slave_single(dma->tx_chan,
449 dma->tx_transfer_addr, dma->tx_size,
450 DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
451 if (!dma->tx_desc) {
452 dev_err(ourport->port.dev, "Unable to get desc for Tx\n");
453 return -EIO;
454 }
455
456 dma->tx_desc->callback = s3c24xx_serial_tx_dma_complete;
457 dma->tx_desc->callback_param = ourport;
458 dma->tx_bytes_requested = dma->tx_size;
459
460 ourport->tx_in_progress = S3C24XX_TX_DMA;
461 dma->tx_cookie = dmaengine_submit(dma->tx_desc);
462 dma_async_issue_pending(dma->tx_chan);
463 return 0;
464}
465
466static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport)
467{
468 struct uart_port *port = &ourport->port;
469 struct circ_buf *xmit = &port->state->xmit;
470 unsigned long count;
471
472 /* Get data size up to the end of buffer */
473 count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
474
475 if (!count) {
476 s3c24xx_serial_stop_tx(port);
477 return;
478 }
479
480 if (!ourport->dma || !ourport->dma->tx_chan ||
481 count < ourport->min_dma_size ||
482 xmit->tail & (dma_get_cache_alignment() - 1))
483 s3c24xx_serial_start_tx_pio(ourport);
484 else
485 s3c24xx_serial_start_tx_dma(ourport, count);
486}
487
488static void s3c24xx_serial_start_tx(struct uart_port *port)
489{
490 struct s3c24xx_uart_port *ourport = to_ourport(port);
491 struct circ_buf *xmit = &port->state->xmit;
492
493 if (!ourport->tx_enabled) {
494 if (port->flags & UPF_CONS_FLOW)
495 s3c24xx_serial_rx_disable(port);
496
497 ourport->tx_enabled = 1;
498 if (!ourport->dma || !ourport->dma->tx_chan)
499 s3c24xx_serial_start_tx_pio(ourport);
500 }
501
502 if (ourport->dma && ourport->dma->tx_chan) {
503 if (!uart_circ_empty(xmit) && !ourport->tx_in_progress)
504 s3c24xx_serial_start_next_tx(ourport);
505 }
506}
507
508static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport,
509 struct tty_port *tty, int count)
510{
511 struct s3c24xx_uart_dma *dma = ourport->dma;
512 int copied;
513
514 if (!count)
515 return;
516
517 dma_sync_single_for_cpu(dma->rx_chan->device->dev, dma->rx_addr,
518 dma->rx_size, DMA_FROM_DEVICE);
519
520 ourport->port.icount.rx += count;
521 if (!tty) {
522 dev_err(ourport->port.dev, "No tty port\n");
523 return;
524 }
525 copied = tty_insert_flip_string(tty,
526 ((unsigned char *)(ourport->dma->rx_buf)), count);
527 if (copied != count) {
528 WARN_ON(1);
529 dev_err(ourport->port.dev, "RxData copy to tty layer failed\n");
530 }
531}
532
533static void s3c24xx_serial_stop_rx(struct uart_port *port)
534{
535 struct s3c24xx_uart_port *ourport = to_ourport(port);
536 struct s3c24xx_uart_dma *dma = ourport->dma;
537 struct tty_port *t = &port->state->port;
538 struct dma_tx_state state;
539 enum dma_status dma_status;
540 unsigned int received;
541
542 if (ourport->rx_enabled) {
543 dev_dbg(port->dev, "stopping rx\n");
544 switch (ourport->info->type) {
545 case TYPE_S3C6400:
546 s3c24xx_set_bit(port, S3C64XX_UINTM_RXD,
547 S3C64XX_UINTM);
548 break;
549 case TYPE_APPLE_S5L:
550 s3c24xx_clear_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON);
551 s3c24xx_clear_bit(port, APPLE_S5L_UCON_RXTO_ENA, S3C2410_UCON);
552 break;
553 default:
554 disable_irq_nosync(ourport->rx_irq);
555 break;
556 }
557 ourport->rx_enabled = 0;
558 }
559 if (dma && dma->rx_chan) {
560 dmaengine_pause(dma->tx_chan);
561 dma_status = dmaengine_tx_status(dma->rx_chan,
562 dma->rx_cookie, &state);
563 if (dma_status == DMA_IN_PROGRESS ||
564 dma_status == DMA_PAUSED) {
565 received = dma->rx_bytes_requested - state.residue;
566 dmaengine_terminate_all(dma->rx_chan);
567 s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
568 }
569 }
570}
571
572static inline const struct s3c24xx_uart_info
573 *s3c24xx_port_to_info(struct uart_port *port)
574{
575 return to_ourport(port)->info;
576}
577
578static inline const struct s3c2410_uartcfg
579 *s3c24xx_port_to_cfg(const struct uart_port *port)
580{
581 const struct s3c24xx_uart_port *ourport;
582
583 if (port->dev == NULL)
584 return NULL;
585
586 ourport = container_of(port, struct s3c24xx_uart_port, port);
587 return ourport->cfg;
588}
589
590static int s3c24xx_serial_rx_fifocnt(const struct s3c24xx_uart_port *ourport,
591 unsigned long ufstat)
592{
593 const struct s3c24xx_uart_info *info = ourport->info;
594
595 if (ufstat & info->rx_fifofull)
596 return ourport->port.fifosize;
597
598 return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
599}
600
601static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport);
602static void s3c24xx_serial_rx_dma_complete(void *args)
603{
604 struct s3c24xx_uart_port *ourport = args;
605 struct uart_port *port = &ourport->port;
606
607 struct s3c24xx_uart_dma *dma = ourport->dma;
608 struct tty_port *t = &port->state->port;
609 struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
610
611 struct dma_tx_state state;
612 unsigned long flags;
613 int received;
614
615 dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state);
616 received = dma->rx_bytes_requested - state.residue;
617 async_tx_ack(dma->rx_desc);
618
619 uart_port_lock_irqsave(port, &flags);
620
621 if (received)
622 s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
623
624 if (tty) {
625 tty_flip_buffer_push(t);
626 tty_kref_put(tty);
627 }
628
629 s3c64xx_start_rx_dma(ourport);
630
631 uart_port_unlock_irqrestore(port, flags);
632}
633
634static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport)
635{
636 struct s3c24xx_uart_dma *dma = ourport->dma;
637
638 dma_sync_single_for_device(dma->rx_chan->device->dev, dma->rx_addr,
639 dma->rx_size, DMA_FROM_DEVICE);
640
641 dma->rx_desc = dmaengine_prep_slave_single(dma->rx_chan,
642 dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM,
643 DMA_PREP_INTERRUPT);
644 if (!dma->rx_desc) {
645 dev_err(ourport->port.dev, "Unable to get desc for Rx\n");
646 return;
647 }
648
649 dma->rx_desc->callback = s3c24xx_serial_rx_dma_complete;
650 dma->rx_desc->callback_param = ourport;
651 dma->rx_bytes_requested = dma->rx_size;
652
653 dma->rx_cookie = dmaengine_submit(dma->rx_desc);
654 dma_async_issue_pending(dma->rx_chan);
655}
656
657/* ? - where has parity gone?? */
658#define S3C2410_UERSTAT_PARITY (0x1000)
659
660static void enable_rx_dma(struct s3c24xx_uart_port *ourport)
661{
662 struct uart_port *port = &ourport->port;
663 unsigned int ucon;
664
665 /* set Rx mode to DMA mode */
666 ucon = rd_regl(port, S3C2410_UCON);
667 ucon &= ~(S3C64XX_UCON_RXBURST_MASK |
668 S3C64XX_UCON_TIMEOUT_MASK |
669 S3C64XX_UCON_EMPTYINT_EN |
670 S3C64XX_UCON_DMASUS_EN |
671 S3C64XX_UCON_TIMEOUT_EN |
672 S3C64XX_UCON_RXMODE_MASK);
673 ucon |= S3C64XX_UCON_RXBURST_1 |
674 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
675 S3C64XX_UCON_EMPTYINT_EN |
676 S3C64XX_UCON_TIMEOUT_EN |
677 S3C64XX_UCON_RXMODE_DMA;
678 wr_regl(port, S3C2410_UCON, ucon);
679
680 ourport->rx_mode = S3C24XX_RX_DMA;
681}
682
683static void enable_rx_pio(struct s3c24xx_uart_port *ourport)
684{
685 struct uart_port *port = &ourport->port;
686 unsigned int ucon;
687
688 /* set Rx mode to DMA mode */
689 ucon = rd_regl(port, S3C2410_UCON);
690 ucon &= ~S3C64XX_UCON_RXMODE_MASK;
691 ucon |= S3C64XX_UCON_RXMODE_CPU;
692
693 /* Apple types use these bits for IRQ masks */
694 if (ourport->info->type != TYPE_APPLE_S5L) {
695 ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK |
696 S3C64XX_UCON_EMPTYINT_EN |
697 S3C64XX_UCON_DMASUS_EN |
698 S3C64XX_UCON_TIMEOUT_EN);
699 ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
700 S3C64XX_UCON_TIMEOUT_EN;
701 }
702 wr_regl(port, S3C2410_UCON, ucon);
703
704 ourport->rx_mode = S3C24XX_RX_PIO;
705}
706
707static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport);
708
709static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id)
710{
711 unsigned int utrstat, received;
712 struct s3c24xx_uart_port *ourport = dev_id;
713 struct uart_port *port = &ourport->port;
714 struct s3c24xx_uart_dma *dma = ourport->dma;
715 struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
716 struct tty_port *t = &port->state->port;
717 struct dma_tx_state state;
718
719 utrstat = rd_regl(port, S3C2410_UTRSTAT);
720 rd_regl(port, S3C2410_UFSTAT);
721
722 uart_port_lock(port);
723
724 if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) {
725 s3c64xx_start_rx_dma(ourport);
726 if (ourport->rx_mode == S3C24XX_RX_PIO)
727 enable_rx_dma(ourport);
728 goto finish;
729 }
730
731 if (ourport->rx_mode == S3C24XX_RX_DMA) {
732 dmaengine_pause(dma->rx_chan);
733 dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state);
734 dmaengine_terminate_all(dma->rx_chan);
735 received = dma->rx_bytes_requested - state.residue;
736 s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
737
738 enable_rx_pio(ourport);
739 }
740
741 s3c24xx_serial_rx_drain_fifo(ourport);
742
743 if (tty) {
744 tty_flip_buffer_push(t);
745 tty_kref_put(tty);
746 }
747
748 wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT);
749
750finish:
751 uart_port_unlock(port);
752
753 return IRQ_HANDLED;
754}
755
756static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
757{
758 struct uart_port *port = &ourport->port;
759 unsigned int ufcon, ufstat, uerstat;
760 unsigned int fifocnt = 0;
761 int max_count = port->fifosize;
762 u8 ch, flag;
763
764 while (max_count-- > 0) {
765 /*
766 * Receive all characters known to be in FIFO
767 * before reading FIFO level again
768 */
769 if (fifocnt == 0) {
770 ufstat = rd_regl(port, S3C2410_UFSTAT);
771 fifocnt = s3c24xx_serial_rx_fifocnt(ourport, ufstat);
772 if (fifocnt == 0)
773 break;
774 }
775 fifocnt--;
776
777 uerstat = rd_regl(port, S3C2410_UERSTAT);
778 ch = rd_reg(port, S3C2410_URXH);
779
780 if (port->flags & UPF_CONS_FLOW) {
781 int txe = s3c24xx_serial_txempty_nofifo(port);
782
783 if (ourport->rx_enabled) {
784 if (!txe) {
785 ourport->rx_enabled = 0;
786 continue;
787 }
788 } else {
789 if (txe) {
790 ufcon = rd_regl(port, S3C2410_UFCON);
791 ufcon |= S3C2410_UFCON_RESETRX;
792 wr_regl(port, S3C2410_UFCON, ufcon);
793 ourport->rx_enabled = 1;
794 return;
795 }
796 continue;
797 }
798 }
799
800 /* insert the character into the buffer */
801
802 flag = TTY_NORMAL;
803 port->icount.rx++;
804
805 if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
806 dev_dbg(port->dev,
807 "rxerr: port ch=0x%02x, rxs=0x%08x\n",
808 ch, uerstat);
809
810 /* check for break */
811 if (uerstat & S3C2410_UERSTAT_BREAK) {
812 dev_dbg(port->dev, "break!\n");
813 port->icount.brk++;
814 if (uart_handle_break(port))
815 continue; /* Ignore character */
816 }
817
818 if (uerstat & S3C2410_UERSTAT_FRAME)
819 port->icount.frame++;
820 if (uerstat & S3C2410_UERSTAT_OVERRUN)
821 port->icount.overrun++;
822
823 uerstat &= port->read_status_mask;
824
825 if (uerstat & S3C2410_UERSTAT_BREAK)
826 flag = TTY_BREAK;
827 else if (uerstat & S3C2410_UERSTAT_PARITY)
828 flag = TTY_PARITY;
829 else if (uerstat & (S3C2410_UERSTAT_FRAME |
830 S3C2410_UERSTAT_OVERRUN))
831 flag = TTY_FRAME;
832 }
833
834 if (uart_handle_sysrq_char(port, ch))
835 continue; /* Ignore character */
836
837 uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN,
838 ch, flag);
839 }
840
841 tty_flip_buffer_push(&port->state->port);
842}
843
844static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id)
845{
846 struct s3c24xx_uart_port *ourport = dev_id;
847 struct uart_port *port = &ourport->port;
848
849 uart_port_lock(port);
850 s3c24xx_serial_rx_drain_fifo(ourport);
851 uart_port_unlock(port);
852
853 return IRQ_HANDLED;
854}
855
856static irqreturn_t s3c24xx_serial_rx_irq(int irq, void *dev_id)
857{
858 struct s3c24xx_uart_port *ourport = dev_id;
859
860 if (ourport->dma && ourport->dma->rx_chan)
861 return s3c24xx_serial_rx_chars_dma(dev_id);
862 return s3c24xx_serial_rx_chars_pio(dev_id);
863}
864
865static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport)
866{
867 struct uart_port *port = &ourport->port;
868 struct circ_buf *xmit = &port->state->xmit;
869 int count, dma_count = 0;
870
871 count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
872
873 if (ourport->dma && ourport->dma->tx_chan &&
874 count >= ourport->min_dma_size) {
875 int align = dma_get_cache_alignment() -
876 (xmit->tail & (dma_get_cache_alignment() - 1));
877 if (count - align >= ourport->min_dma_size) {
878 dma_count = count - align;
879 count = align;
880 }
881 }
882
883 if (port->x_char) {
884 wr_reg(port, S3C2410_UTXH, port->x_char);
885 port->icount.tx++;
886 port->x_char = 0;
887 return;
888 }
889
890 /* if there isn't anything more to transmit, or the uart is now
891 * stopped, disable the uart and exit
892 */
893
894 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
895 s3c24xx_serial_stop_tx(port);
896 return;
897 }
898
899 /* try and drain the buffer... */
900
901 if (count > port->fifosize) {
902 count = port->fifosize;
903 dma_count = 0;
904 }
905
906 while (!uart_circ_empty(xmit) && count > 0) {
907 if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
908 break;
909
910 wr_reg(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
911 uart_xmit_advance(port, 1);
912 count--;
913 }
914
915 if (!count && dma_count) {
916 s3c24xx_serial_start_tx_dma(ourport, dma_count);
917 return;
918 }
919
920 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
921 uart_write_wakeup(port);
922
923 if (uart_circ_empty(xmit))
924 s3c24xx_serial_stop_tx(port);
925}
926
927static irqreturn_t s3c24xx_serial_tx_irq(int irq, void *id)
928{
929 struct s3c24xx_uart_port *ourport = id;
930 struct uart_port *port = &ourport->port;
931
932 uart_port_lock(port);
933
934 s3c24xx_serial_tx_chars(ourport);
935
936 uart_port_unlock(port);
937 return IRQ_HANDLED;
938}
939
940/* interrupt handler for s3c64xx and later SoC's.*/
941static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
942{
943 const struct s3c24xx_uart_port *ourport = id;
944 const struct uart_port *port = &ourport->port;
945 unsigned int pend = rd_regl(port, S3C64XX_UINTP);
946 irqreturn_t ret = IRQ_HANDLED;
947
948 if (pend & S3C64XX_UINTM_RXD_MSK) {
949 ret = s3c24xx_serial_rx_irq(irq, id);
950 wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK);
951 }
952 if (pend & S3C64XX_UINTM_TXD_MSK) {
953 ret = s3c24xx_serial_tx_irq(irq, id);
954 wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK);
955 }
956 return ret;
957}
958
959/* interrupt handler for Apple SoC's.*/
960static irqreturn_t apple_serial_handle_irq(int irq, void *id)
961{
962 const struct s3c24xx_uart_port *ourport = id;
963 const struct uart_port *port = &ourport->port;
964 unsigned int pend = rd_regl(port, S3C2410_UTRSTAT);
965 irqreturn_t ret = IRQ_NONE;
966
967 if (pend & (APPLE_S5L_UTRSTAT_RXTHRESH | APPLE_S5L_UTRSTAT_RXTO)) {
968 wr_regl(port, S3C2410_UTRSTAT,
969 APPLE_S5L_UTRSTAT_RXTHRESH | APPLE_S5L_UTRSTAT_RXTO);
970 ret = s3c24xx_serial_rx_irq(irq, id);
971 }
972 if (pend & APPLE_S5L_UTRSTAT_TXTHRESH) {
973 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_TXTHRESH);
974 ret = s3c24xx_serial_tx_irq(irq, id);
975 }
976
977 return ret;
978}
979
980static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
981{
982 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
983 unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
984 unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
985
986 if (ufcon & S3C2410_UFCON_FIFOMODE) {
987 if ((ufstat & info->tx_fifomask) != 0 ||
988 (ufstat & info->tx_fifofull))
989 return 0;
990
991 return 1;
992 }
993
994 return s3c24xx_serial_txempty_nofifo(port);
995}
996
997/* no modem control lines */
998static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
999{
1000 unsigned int umstat = rd_reg(port, S3C2410_UMSTAT);
1001
1002 if (umstat & S3C2410_UMSTAT_CTS)
1003 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
1004 else
1005 return TIOCM_CAR | TIOCM_DSR;
1006}
1007
1008static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
1009{
1010 unsigned int umcon = rd_regl(port, S3C2410_UMCON);
1011 unsigned int ucon = rd_regl(port, S3C2410_UCON);
1012
1013 if (mctrl & TIOCM_RTS)
1014 umcon |= S3C2410_UMCOM_RTS_LOW;
1015 else
1016 umcon &= ~S3C2410_UMCOM_RTS_LOW;
1017
1018 wr_regl(port, S3C2410_UMCON, umcon);
1019
1020 if (mctrl & TIOCM_LOOP)
1021 ucon |= S3C2410_UCON_LOOPBACK;
1022 else
1023 ucon &= ~S3C2410_UCON_LOOPBACK;
1024
1025 wr_regl(port, S3C2410_UCON, ucon);
1026}
1027
1028static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
1029{
1030 unsigned long flags;
1031 unsigned int ucon;
1032
1033 uart_port_lock_irqsave(port, &flags);
1034
1035 ucon = rd_regl(port, S3C2410_UCON);
1036
1037 if (break_state)
1038 ucon |= S3C2410_UCON_SBREAK;
1039 else
1040 ucon &= ~S3C2410_UCON_SBREAK;
1041
1042 wr_regl(port, S3C2410_UCON, ucon);
1043
1044 uart_port_unlock_irqrestore(port, flags);
1045}
1046
1047static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
1048{
1049 struct s3c24xx_uart_dma *dma = p->dma;
1050 struct dma_slave_caps dma_caps;
1051 const char *reason = NULL;
1052 int ret;
1053
1054 /* Default slave configuration parameters */
1055 dma->rx_conf.direction = DMA_DEV_TO_MEM;
1056 dma->rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
1057 dma->rx_conf.src_addr = p->port.mapbase + S3C2410_URXH;
1058 dma->rx_conf.src_maxburst = 1;
1059
1060 dma->tx_conf.direction = DMA_MEM_TO_DEV;
1061 dma->tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
1062 dma->tx_conf.dst_addr = p->port.mapbase + S3C2410_UTXH;
1063 dma->tx_conf.dst_maxburst = 1;
1064
1065 dma->rx_chan = dma_request_chan(p->port.dev, "rx");
1066
1067 if (IS_ERR(dma->rx_chan)) {
1068 reason = "DMA RX channel request failed";
1069 ret = PTR_ERR(dma->rx_chan);
1070 goto err_warn;
1071 }
1072
1073 ret = dma_get_slave_caps(dma->rx_chan, &dma_caps);
1074 if (ret < 0 ||
1075 dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) {
1076 reason = "insufficient DMA RX engine capabilities";
1077 ret = -EOPNOTSUPP;
1078 goto err_release_rx;
1079 }
1080
1081 dmaengine_slave_config(dma->rx_chan, &dma->rx_conf);
1082
1083 dma->tx_chan = dma_request_chan(p->port.dev, "tx");
1084 if (IS_ERR(dma->tx_chan)) {
1085 reason = "DMA TX channel request failed";
1086 ret = PTR_ERR(dma->tx_chan);
1087 goto err_release_rx;
1088 }
1089
1090 ret = dma_get_slave_caps(dma->tx_chan, &dma_caps);
1091 if (ret < 0 ||
1092 dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) {
1093 reason = "insufficient DMA TX engine capabilities";
1094 ret = -EOPNOTSUPP;
1095 goto err_release_tx;
1096 }
1097
1098 dmaengine_slave_config(dma->tx_chan, &dma->tx_conf);
1099
1100 /* RX buffer */
1101 dma->rx_size = PAGE_SIZE;
1102
1103 dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL);
1104 if (!dma->rx_buf) {
1105 ret = -ENOMEM;
1106 goto err_release_tx;
1107 }
1108
1109 dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf,
1110 dma->rx_size, DMA_FROM_DEVICE);
1111 if (dma_mapping_error(dma->rx_chan->device->dev, dma->rx_addr)) {
1112 reason = "DMA mapping error for RX buffer";
1113 ret = -EIO;
1114 goto err_free_rx;
1115 }
1116
1117 /* TX buffer */
1118 dma->tx_addr = dma_map_single(dma->tx_chan->device->dev,
1119 p->port.state->xmit.buf, UART_XMIT_SIZE,
1120 DMA_TO_DEVICE);
1121 if (dma_mapping_error(dma->tx_chan->device->dev, dma->tx_addr)) {
1122 reason = "DMA mapping error for TX buffer";
1123 ret = -EIO;
1124 goto err_unmap_rx;
1125 }
1126
1127 return 0;
1128
1129err_unmap_rx:
1130 dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr,
1131 dma->rx_size, DMA_FROM_DEVICE);
1132err_free_rx:
1133 kfree(dma->rx_buf);
1134err_release_tx:
1135 dma_release_channel(dma->tx_chan);
1136err_release_rx:
1137 dma_release_channel(dma->rx_chan);
1138err_warn:
1139 if (reason)
1140 dev_warn(p->port.dev, "%s, DMA will not be used\n", reason);
1141 return ret;
1142}
1143
1144static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
1145{
1146 struct s3c24xx_uart_dma *dma = p->dma;
1147
1148 if (dma->rx_chan) {
1149 dmaengine_terminate_all(dma->rx_chan);
1150 dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr,
1151 dma->rx_size, DMA_FROM_DEVICE);
1152 kfree(dma->rx_buf);
1153 dma_release_channel(dma->rx_chan);
1154 dma->rx_chan = NULL;
1155 }
1156
1157 if (dma->tx_chan) {
1158 dmaengine_terminate_all(dma->tx_chan);
1159 dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr,
1160 UART_XMIT_SIZE, DMA_TO_DEVICE);
1161 dma_release_channel(dma->tx_chan);
1162 dma->tx_chan = NULL;
1163 }
1164}
1165
1166static void s3c64xx_serial_shutdown(struct uart_port *port)
1167{
1168 struct s3c24xx_uart_port *ourport = to_ourport(port);
1169
1170 ourport->tx_enabled = 0;
1171 ourport->tx_mode = 0;
1172 ourport->rx_enabled = 0;
1173
1174 free_irq(port->irq, ourport);
1175
1176 wr_regl(port, S3C64XX_UINTP, 0xf);
1177 wr_regl(port, S3C64XX_UINTM, 0xf);
1178
1179 if (ourport->dma)
1180 s3c24xx_serial_release_dma(ourport);
1181
1182 ourport->tx_in_progress = 0;
1183}
1184
1185static void apple_s5l_serial_shutdown(struct uart_port *port)
1186{
1187 struct s3c24xx_uart_port *ourport = to_ourport(port);
1188
1189 unsigned int ucon;
1190
1191 ucon = rd_regl(port, S3C2410_UCON);
1192 ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK |
1193 APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
1194 APPLE_S5L_UCON_RXTO_ENA_MSK);
1195 wr_regl(port, S3C2410_UCON, ucon);
1196
1197 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS);
1198
1199 free_irq(port->irq, ourport);
1200
1201 ourport->tx_enabled = 0;
1202 ourport->tx_mode = 0;
1203 ourport->rx_enabled = 0;
1204
1205 if (ourport->dma)
1206 s3c24xx_serial_release_dma(ourport);
1207
1208 ourport->tx_in_progress = 0;
1209}
1210
1211static int s3c64xx_serial_startup(struct uart_port *port)
1212{
1213 struct s3c24xx_uart_port *ourport = to_ourport(port);
1214 unsigned long flags;
1215 unsigned int ufcon;
1216 int ret;
1217
1218 wr_regl(port, S3C64XX_UINTM, 0xf);
1219 if (ourport->dma) {
1220 ret = s3c24xx_serial_request_dma(ourport);
1221 if (ret < 0) {
1222 devm_kfree(port->dev, ourport->dma);
1223 ourport->dma = NULL;
1224 }
1225 }
1226
1227 ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED,
1228 s3c24xx_serial_portname(port), ourport);
1229 if (ret) {
1230 dev_err(port->dev, "cannot get irq %d\n", port->irq);
1231 return ret;
1232 }
1233
1234 /* For compatibility with s3c24xx Soc's */
1235 ourport->rx_enabled = 1;
1236 ourport->tx_enabled = 0;
1237
1238 uart_port_lock_irqsave(port, &flags);
1239
1240 ufcon = rd_regl(port, S3C2410_UFCON);
1241 ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8;
1242 if (!uart_console(port))
1243 ufcon |= S3C2410_UFCON_RESETTX;
1244 wr_regl(port, S3C2410_UFCON, ufcon);
1245
1246 enable_rx_pio(ourport);
1247
1248 uart_port_unlock_irqrestore(port, flags);
1249
1250 /* Enable Rx Interrupt */
1251 s3c24xx_clear_bit(port, S3C64XX_UINTM_RXD, S3C64XX_UINTM);
1252
1253 return ret;
1254}
1255
1256static int apple_s5l_serial_startup(struct uart_port *port)
1257{
1258 struct s3c24xx_uart_port *ourport = to_ourport(port);
1259 unsigned long flags;
1260 unsigned int ufcon;
1261 int ret;
1262
1263 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS);
1264
1265 ret = request_irq(port->irq, apple_serial_handle_irq, 0,
1266 s3c24xx_serial_portname(port), ourport);
1267 if (ret) {
1268 dev_err(port->dev, "cannot get irq %d\n", port->irq);
1269 return ret;
1270 }
1271
1272 /* For compatibility with s3c24xx Soc's */
1273 ourport->rx_enabled = 1;
1274 ourport->tx_enabled = 0;
1275
1276 uart_port_lock_irqsave(port, &flags);
1277
1278 ufcon = rd_regl(port, S3C2410_UFCON);
1279 ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8;
1280 if (!uart_console(port))
1281 ufcon |= S3C2410_UFCON_RESETTX;
1282 wr_regl(port, S3C2410_UFCON, ufcon);
1283
1284 enable_rx_pio(ourport);
1285
1286 uart_port_unlock_irqrestore(port, flags);
1287
1288 /* Enable Rx Interrupt */
1289 s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON);
1290 s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTO_ENA, S3C2410_UCON);
1291
1292 return ret;
1293}
1294
1295/* power power management control */
1296
1297static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
1298 unsigned int old)
1299{
1300 struct s3c24xx_uart_port *ourport = to_ourport(port);
1301 int timeout = 10000;
1302
1303 ourport->pm_level = level;
1304
1305 switch (level) {
1306 case 3:
1307 while (--timeout && !s3c24xx_serial_txempty_nofifo(port))
1308 udelay(100);
1309
1310 if (!IS_ERR(ourport->baudclk))
1311 clk_disable_unprepare(ourport->baudclk);
1312
1313 clk_disable_unprepare(ourport->clk);
1314 break;
1315
1316 case 0:
1317 clk_prepare_enable(ourport->clk);
1318
1319 if (!IS_ERR(ourport->baudclk))
1320 clk_prepare_enable(ourport->baudclk);
1321 break;
1322 default:
1323 dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level);
1324 }
1325}
1326
1327/* baud rate calculation
1328 *
1329 * The UARTs on the S3C2410/S3C2440 can take their clocks from a number
1330 * of different sources, including the peripheral clock ("pclk") and an
1331 * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk")
1332 * with a programmable extra divisor.
1333 *
1334 * The following code goes through the clock sources, and calculates the
1335 * baud clocks (and the resultant actual baud rates) and then tries to
1336 * pick the closest one and select that.
1337 *
1338 */
1339
1340#define MAX_CLK_NAME_LENGTH 15
1341
1342static inline int s3c24xx_serial_getsource(struct uart_port *port)
1343{
1344 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1345 unsigned int ucon;
1346
1347 if (info->num_clks == 1)
1348 return 0;
1349
1350 ucon = rd_regl(port, S3C2410_UCON);
1351 ucon &= info->clksel_mask;
1352 return ucon >> info->clksel_shift;
1353}
1354
1355static void s3c24xx_serial_setsource(struct uart_port *port,
1356 unsigned int clk_sel)
1357{
1358 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1359 unsigned int ucon;
1360
1361 if (info->num_clks == 1)
1362 return;
1363
1364 ucon = rd_regl(port, S3C2410_UCON);
1365 if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel)
1366 return;
1367
1368 ucon &= ~info->clksel_mask;
1369 ucon |= clk_sel << info->clksel_shift;
1370 wr_regl(port, S3C2410_UCON, ucon);
1371}
1372
1373static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
1374 unsigned int req_baud, struct clk **best_clk,
1375 unsigned int *clk_num)
1376{
1377 const struct s3c24xx_uart_info *info = ourport->info;
1378 struct clk *clk;
1379 unsigned long rate;
1380 unsigned int cnt, baud, quot, best_quot = 0;
1381 char clkname[MAX_CLK_NAME_LENGTH];
1382 int calc_deviation, deviation = (1 << 30) - 1;
1383
1384 for (cnt = 0; cnt < info->num_clks; cnt++) {
1385 /* Keep selected clock if provided */
1386 if (ourport->cfg->clk_sel &&
1387 !(ourport->cfg->clk_sel & (1 << cnt)))
1388 continue;
1389
1390 sprintf(clkname, "clk_uart_baud%d", cnt);
1391 clk = clk_get(ourport->port.dev, clkname);
1392 if (IS_ERR(clk))
1393 continue;
1394
1395 rate = clk_get_rate(clk);
1396 if (!rate) {
1397 dev_err(ourport->port.dev,
1398 "Failed to get clock rate for %s.\n", clkname);
1399 clk_put(clk);
1400 continue;
1401 }
1402
1403 if (ourport->info->has_divslot) {
1404 unsigned long div = rate / req_baud;
1405
1406 /* The UDIVSLOT register on the newer UARTs allows us to
1407 * get a divisor adjustment of 1/16th on the baud clock.
1408 *
1409 * We don't keep the UDIVSLOT value (the 16ths we
1410 * calculated by not multiplying the baud by 16) as it
1411 * is easy enough to recalculate.
1412 */
1413
1414 quot = div / 16;
1415 baud = rate / div;
1416 } else {
1417 quot = (rate + (8 * req_baud)) / (16 * req_baud);
1418 baud = rate / (quot * 16);
1419 }
1420 quot--;
1421
1422 calc_deviation = abs(req_baud - baud);
1423
1424 if (calc_deviation < deviation) {
1425 /*
1426 * If we find a better clk, release the previous one, if
1427 * any.
1428 */
1429 if (!IS_ERR(*best_clk))
1430 clk_put(*best_clk);
1431 *best_clk = clk;
1432 best_quot = quot;
1433 *clk_num = cnt;
1434 deviation = calc_deviation;
1435 } else {
1436 clk_put(clk);
1437 }
1438 }
1439
1440 return best_quot;
1441}
1442
1443/* udivslot_table[]
1444 *
1445 * This table takes the fractional value of the baud divisor and gives
1446 * the recommended setting for the UDIVSLOT register.
1447 */
1448static const u16 udivslot_table[16] = {
1449 [0] = 0x0000,
1450 [1] = 0x0080,
1451 [2] = 0x0808,
1452 [3] = 0x0888,
1453 [4] = 0x2222,
1454 [5] = 0x4924,
1455 [6] = 0x4A52,
1456 [7] = 0x54AA,
1457 [8] = 0x5555,
1458 [9] = 0xD555,
1459 [10] = 0xD5D5,
1460 [11] = 0xDDD5,
1461 [12] = 0xDDDD,
1462 [13] = 0xDFDD,
1463 [14] = 0xDFDF,
1464 [15] = 0xFFDF,
1465};
1466
1467static void s3c24xx_serial_set_termios(struct uart_port *port,
1468 struct ktermios *termios,
1469 const struct ktermios *old)
1470{
1471 const struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
1472 struct s3c24xx_uart_port *ourport = to_ourport(port);
1473 struct clk *clk = ERR_PTR(-EINVAL);
1474 unsigned long flags;
1475 unsigned int baud, quot, clk_sel = 0;
1476 unsigned int ulcon;
1477 unsigned int umcon;
1478 unsigned int udivslot = 0;
1479
1480 /*
1481 * We don't support modem control lines.
1482 */
1483 termios->c_cflag &= ~(HUPCL | CMSPAR);
1484 termios->c_cflag |= CLOCAL;
1485
1486 /*
1487 * Ask the core to calculate the divisor for us.
1488 */
1489
1490 baud = uart_get_baud_rate(port, termios, old, 0, 3000000);
1491 quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
1492 if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
1493 quot = port->custom_divisor;
1494 if (IS_ERR(clk))
1495 return;
1496
1497 /* check to see if we need to change clock source */
1498
1499 if (ourport->baudclk != clk) {
1500 clk_prepare_enable(clk);
1501
1502 s3c24xx_serial_setsource(port, clk_sel);
1503
1504 if (!IS_ERR(ourport->baudclk)) {
1505 clk_disable_unprepare(ourport->baudclk);
1506 ourport->baudclk = ERR_PTR(-EINVAL);
1507 }
1508
1509 ourport->baudclk = clk;
1510 ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
1511 }
1512
1513 if (ourport->info->has_divslot) {
1514 unsigned int div = ourport->baudclk_rate / baud;
1515
1516 if (cfg->has_fracval) {
1517 udivslot = (div & 15);
1518 dev_dbg(port->dev, "fracval = %04x\n", udivslot);
1519 } else {
1520 udivslot = udivslot_table[div & 15];
1521 dev_dbg(port->dev, "udivslot = %04x (div %d)\n",
1522 udivslot, div & 15);
1523 }
1524 }
1525
1526 switch (termios->c_cflag & CSIZE) {
1527 case CS5:
1528 dev_dbg(port->dev, "config: 5bits/char\n");
1529 ulcon = S3C2410_LCON_CS5;
1530 break;
1531 case CS6:
1532 dev_dbg(port->dev, "config: 6bits/char\n");
1533 ulcon = S3C2410_LCON_CS6;
1534 break;
1535 case CS7:
1536 dev_dbg(port->dev, "config: 7bits/char\n");
1537 ulcon = S3C2410_LCON_CS7;
1538 break;
1539 case CS8:
1540 default:
1541 dev_dbg(port->dev, "config: 8bits/char\n");
1542 ulcon = S3C2410_LCON_CS8;
1543 break;
1544 }
1545
1546 /* preserve original lcon IR settings */
1547 ulcon |= (cfg->ulcon & S3C2410_LCON_IRM);
1548
1549 if (termios->c_cflag & CSTOPB)
1550 ulcon |= S3C2410_LCON_STOPB;
1551
1552 if (termios->c_cflag & PARENB) {
1553 if (termios->c_cflag & PARODD)
1554 ulcon |= S3C2410_LCON_PODD;
1555 else
1556 ulcon |= S3C2410_LCON_PEVEN;
1557 } else {
1558 ulcon |= S3C2410_LCON_PNONE;
1559 }
1560
1561 uart_port_lock_irqsave(port, &flags);
1562
1563 dev_dbg(port->dev,
1564 "setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
1565 ulcon, quot, udivslot);
1566
1567 wr_regl(port, S3C2410_ULCON, ulcon);
1568 wr_regl(port, S3C2410_UBRDIV, quot);
1569
1570 port->status &= ~UPSTAT_AUTOCTS;
1571
1572 umcon = rd_regl(port, S3C2410_UMCON);
1573 if (termios->c_cflag & CRTSCTS) {
1574 umcon |= S3C2410_UMCOM_AFC;
1575 /* Disable RTS when RX FIFO contains 63 bytes */
1576 umcon &= ~S3C2412_UMCON_AFC_8;
1577 port->status = UPSTAT_AUTOCTS;
1578 } else {
1579 umcon &= ~S3C2410_UMCOM_AFC;
1580 }
1581 wr_regl(port, S3C2410_UMCON, umcon);
1582
1583 if (ourport->info->has_divslot)
1584 wr_regl(port, S3C2443_DIVSLOT, udivslot);
1585
1586 dev_dbg(port->dev,
1587 "uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
1588 rd_regl(port, S3C2410_ULCON),
1589 rd_regl(port, S3C2410_UCON),
1590 rd_regl(port, S3C2410_UFCON));
1591
1592 /*
1593 * Update the per-port timeout.
1594 */
1595 uart_update_timeout(port, termios->c_cflag, baud);
1596
1597 /*
1598 * Which character status flags are we interested in?
1599 */
1600 port->read_status_mask = S3C2410_UERSTAT_OVERRUN;
1601 if (termios->c_iflag & INPCK)
1602 port->read_status_mask |= S3C2410_UERSTAT_FRAME |
1603 S3C2410_UERSTAT_PARITY;
1604 /*
1605 * Which character status flags should we ignore?
1606 */
1607 port->ignore_status_mask = 0;
1608 if (termios->c_iflag & IGNPAR)
1609 port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN;
1610 if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
1611 port->ignore_status_mask |= S3C2410_UERSTAT_FRAME;
1612
1613 /*
1614 * Ignore all characters if CREAD is not set.
1615 */
1616 if ((termios->c_cflag & CREAD) == 0)
1617 port->ignore_status_mask |= RXSTAT_DUMMY_READ;
1618
1619 uart_port_unlock_irqrestore(port, flags);
1620}
1621
1622static const char *s3c24xx_serial_type(struct uart_port *port)
1623{
1624 const struct s3c24xx_uart_port *ourport = to_ourport(port);
1625
1626 switch (ourport->info->type) {
1627 case TYPE_S3C6400:
1628 return "S3C6400/10";
1629 case TYPE_APPLE_S5L:
1630 return "APPLE S5L";
1631 default:
1632 return NULL;
1633 }
1634}
1635
1636static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
1637{
1638 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1639
1640 if (flags & UART_CONFIG_TYPE)
1641 port->type = info->port_type;
1642}
1643
1644/*
1645 * verify the new serial_struct (for TIOCSSERIAL).
1646 */
1647static int
1648s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
1649{
1650 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1651
1652 if (ser->type != PORT_UNKNOWN && ser->type != info->port_type)
1653 return -EINVAL;
1654
1655 return 0;
1656}
1657
1658#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
1659
1660static struct console s3c24xx_serial_console;
1661
1662static void __init s3c24xx_serial_register_console(void)
1663{
1664 register_console(&s3c24xx_serial_console);
1665}
1666
1667static void s3c24xx_serial_unregister_console(void)
1668{
1669 if (console_is_registered(&s3c24xx_serial_console))
1670 unregister_console(&s3c24xx_serial_console);
1671}
1672
1673#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
1674#else
1675static inline void s3c24xx_serial_register_console(void) { }
1676static inline void s3c24xx_serial_unregister_console(void) { }
1677#define S3C24XX_SERIAL_CONSOLE NULL
1678#endif
1679
1680#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
1681static int s3c24xx_serial_get_poll_char(struct uart_port *port);
1682static void s3c24xx_serial_put_poll_char(struct uart_port *port,
1683 unsigned char c);
1684#endif
1685
1686static const struct uart_ops s3c64xx_serial_ops = {
1687 .pm = s3c24xx_serial_pm,
1688 .tx_empty = s3c24xx_serial_tx_empty,
1689 .get_mctrl = s3c24xx_serial_get_mctrl,
1690 .set_mctrl = s3c24xx_serial_set_mctrl,
1691 .stop_tx = s3c24xx_serial_stop_tx,
1692 .start_tx = s3c24xx_serial_start_tx,
1693 .stop_rx = s3c24xx_serial_stop_rx,
1694 .break_ctl = s3c24xx_serial_break_ctl,
1695 .startup = s3c64xx_serial_startup,
1696 .shutdown = s3c64xx_serial_shutdown,
1697 .set_termios = s3c24xx_serial_set_termios,
1698 .type = s3c24xx_serial_type,
1699 .config_port = s3c24xx_serial_config_port,
1700 .verify_port = s3c24xx_serial_verify_port,
1701#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
1702 .poll_get_char = s3c24xx_serial_get_poll_char,
1703 .poll_put_char = s3c24xx_serial_put_poll_char,
1704#endif
1705};
1706
1707static const struct uart_ops apple_s5l_serial_ops = {
1708 .pm = s3c24xx_serial_pm,
1709 .tx_empty = s3c24xx_serial_tx_empty,
1710 .get_mctrl = s3c24xx_serial_get_mctrl,
1711 .set_mctrl = s3c24xx_serial_set_mctrl,
1712 .stop_tx = s3c24xx_serial_stop_tx,
1713 .start_tx = s3c24xx_serial_start_tx,
1714 .stop_rx = s3c24xx_serial_stop_rx,
1715 .break_ctl = s3c24xx_serial_break_ctl,
1716 .startup = apple_s5l_serial_startup,
1717 .shutdown = apple_s5l_serial_shutdown,
1718 .set_termios = s3c24xx_serial_set_termios,
1719 .type = s3c24xx_serial_type,
1720 .config_port = s3c24xx_serial_config_port,
1721 .verify_port = s3c24xx_serial_verify_port,
1722#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
1723 .poll_get_char = s3c24xx_serial_get_poll_char,
1724 .poll_put_char = s3c24xx_serial_put_poll_char,
1725#endif
1726};
1727
1728static struct uart_driver s3c24xx_uart_drv = {
1729 .owner = THIS_MODULE,
1730 .driver_name = "s3c2410_serial",
1731 .nr = UART_NR,
1732 .cons = S3C24XX_SERIAL_CONSOLE,
1733 .dev_name = S3C24XX_SERIAL_NAME,
1734 .major = S3C24XX_SERIAL_MAJOR,
1735 .minor = S3C24XX_SERIAL_MINOR,
1736};
1737
1738static struct s3c24xx_uart_port s3c24xx_serial_ports[UART_NR];
1739
1740static void s3c24xx_serial_init_port_default(int index) {
1741 struct uart_port *port = &s3c24xx_serial_ports[index].port;
1742
1743 spin_lock_init(&port->lock);
1744
1745 port->iotype = UPIO_MEM;
1746 port->uartclk = 0;
1747 port->fifosize = 16;
1748 port->flags = UPF_BOOT_AUTOCONF;
1749 port->line = index;
1750}
1751
1752/* s3c24xx_serial_resetport
1753 *
1754 * reset the fifos and other the settings.
1755 */
1756
1757static void s3c24xx_serial_resetport(struct uart_port *port,
1758 const struct s3c2410_uartcfg *cfg)
1759{
1760 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1761 unsigned long ucon = rd_regl(port, S3C2410_UCON);
1762
1763 ucon &= (info->clksel_mask | info->ucon_mask);
1764 wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
1765
1766 /* reset both fifos */
1767 wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
1768 wr_regl(port, S3C2410_UFCON, cfg->ufcon);
1769
1770 /* some delay is required after fifo reset */
1771 udelay(1);
1772}
1773
1774static int s3c24xx_serial_enable_baudclk(struct s3c24xx_uart_port *ourport)
1775{
1776 struct device *dev = ourport->port.dev;
1777 const struct s3c24xx_uart_info *info = ourport->info;
1778 char clk_name[MAX_CLK_NAME_LENGTH];
1779 unsigned int clk_sel;
1780 struct clk *clk;
1781 int clk_num;
1782 int ret;
1783
1784 clk_sel = ourport->cfg->clk_sel ? : info->def_clk_sel;
1785 for (clk_num = 0; clk_num < info->num_clks; clk_num++) {
1786 if (!(clk_sel & (1 << clk_num)))
1787 continue;
1788
1789 sprintf(clk_name, "clk_uart_baud%d", clk_num);
1790 clk = clk_get(dev, clk_name);
1791 if (IS_ERR(clk))
1792 continue;
1793
1794 ret = clk_prepare_enable(clk);
1795 if (ret) {
1796 clk_put(clk);
1797 continue;
1798 }
1799
1800 ourport->baudclk = clk;
1801 ourport->baudclk_rate = clk_get_rate(clk);
1802 s3c24xx_serial_setsource(&ourport->port, clk_num);
1803
1804 return 0;
1805 }
1806
1807 return -EINVAL;
1808}
1809
1810/* s3c24xx_serial_init_port
1811 *
1812 * initialise a single serial port from the platform device given
1813 */
1814
1815static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
1816 struct platform_device *platdev)
1817{
1818 struct uart_port *port = &ourport->port;
1819 const struct s3c2410_uartcfg *cfg = ourport->cfg;
1820 struct resource *res;
1821 int ret;
1822
1823 if (platdev == NULL)
1824 return -ENODEV;
1825
1826 if (port->mapbase != 0)
1827 return -EINVAL;
1828
1829 /* setup info for port */
1830 port->dev = &platdev->dev;
1831
1832 port->uartclk = 1;
1833
1834 if (cfg->uart_flags & UPF_CONS_FLOW) {
1835 dev_dbg(port->dev, "enabling flow control\n");
1836 port->flags |= UPF_CONS_FLOW;
1837 }
1838
1839 /* sort our the physical and virtual addresses for each UART */
1840
1841 res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
1842 if (res == NULL) {
1843 dev_err(port->dev, "failed to find memory resource for uart\n");
1844 return -EINVAL;
1845 }
1846
1847 dev_dbg(port->dev, "resource %pR)\n", res);
1848
1849 port->membase = devm_ioremap_resource(port->dev, res);
1850 if (IS_ERR(port->membase)) {
1851 dev_err(port->dev, "failed to remap controller address\n");
1852 return -EBUSY;
1853 }
1854
1855 port->mapbase = res->start;
1856 ret = platform_get_irq(platdev, 0);
1857 if (ret < 0) {
1858 port->irq = 0;
1859 } else {
1860 port->irq = ret;
1861 ourport->rx_irq = ret;
1862 ourport->tx_irq = ret + 1;
1863 }
1864
1865 /*
1866 * DMA is currently supported only on DT platforms, if DMA properties
1867 * are specified.
1868 */
1869 if (platdev->dev.of_node && of_find_property(platdev->dev.of_node,
1870 "dmas", NULL)) {
1871 ourport->dma = devm_kzalloc(port->dev,
1872 sizeof(*ourport->dma),
1873 GFP_KERNEL);
1874 if (!ourport->dma) {
1875 ret = -ENOMEM;
1876 goto err;
1877 }
1878 }
1879
1880 ourport->clk = clk_get(&platdev->dev, "uart");
1881 if (IS_ERR(ourport->clk)) {
1882 pr_err("%s: Controller clock not found\n",
1883 dev_name(&platdev->dev));
1884 ret = PTR_ERR(ourport->clk);
1885 goto err;
1886 }
1887
1888 ret = clk_prepare_enable(ourport->clk);
1889 if (ret) {
1890 pr_err("uart: clock failed to prepare+enable: %d\n", ret);
1891 clk_put(ourport->clk);
1892 goto err;
1893 }
1894
1895 ret = s3c24xx_serial_enable_baudclk(ourport);
1896 if (ret)
1897 pr_warn("uart: failed to enable baudclk\n");
1898
1899 /* Keep all interrupts masked and cleared */
1900 switch (ourport->info->type) {
1901 case TYPE_S3C6400:
1902 wr_regl(port, S3C64XX_UINTM, 0xf);
1903 wr_regl(port, S3C64XX_UINTP, 0xf);
1904 wr_regl(port, S3C64XX_UINTSP, 0xf);
1905 break;
1906 case TYPE_APPLE_S5L: {
1907 unsigned int ucon;
1908
1909 ucon = rd_regl(port, S3C2410_UCON);
1910 ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK |
1911 APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
1912 APPLE_S5L_UCON_RXTO_ENA_MSK);
1913 wr_regl(port, S3C2410_UCON, ucon);
1914
1915 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS);
1916 break;
1917 }
1918 default:
1919 break;
1920 }
1921
1922 dev_dbg(port->dev, "port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n",
1923 &port->mapbase, port->membase, port->irq,
1924 ourport->rx_irq, ourport->tx_irq, port->uartclk);
1925
1926 /* reset the fifos (and setup the uart) */
1927 s3c24xx_serial_resetport(port, cfg);
1928
1929 return 0;
1930
1931err:
1932 port->mapbase = 0;
1933 return ret;
1934}
1935
1936/* Device driver serial port probe */
1937
1938static int probe_index;
1939
1940static inline const struct s3c24xx_serial_drv_data *
1941s3c24xx_get_driver_data(struct platform_device *pdev)
1942{
1943 if (dev_of_node(&pdev->dev))
1944 return of_device_get_match_data(&pdev->dev);
1945
1946 return (struct s3c24xx_serial_drv_data *)
1947 platform_get_device_id(pdev)->driver_data;
1948}
1949
1950static int s3c24xx_serial_probe(struct platform_device *pdev)
1951{
1952 struct device_node *np = pdev->dev.of_node;
1953 struct s3c24xx_uart_port *ourport;
1954 int index = probe_index;
1955 int ret, prop = 0;
1956
1957 if (np) {
1958 ret = of_alias_get_id(np, "serial");
1959 if (ret >= 0)
1960 index = ret;
1961 }
1962
1963 if (index >= ARRAY_SIZE(s3c24xx_serial_ports)) {
1964 dev_err(&pdev->dev, "serial%d out of range\n", index);
1965 return -EINVAL;
1966 }
1967 ourport = &s3c24xx_serial_ports[index];
1968
1969 s3c24xx_serial_init_port_default(index);
1970
1971 ourport->drv_data = s3c24xx_get_driver_data(pdev);
1972 if (!ourport->drv_data) {
1973 dev_err(&pdev->dev, "could not find driver data\n");
1974 return -ENODEV;
1975 }
1976
1977 ourport->baudclk = ERR_PTR(-EINVAL);
1978 ourport->info = &ourport->drv_data->info;
1979 ourport->cfg = (dev_get_platdata(&pdev->dev)) ?
1980 dev_get_platdata(&pdev->dev) :
1981 &ourport->drv_data->def_cfg;
1982
1983 switch (ourport->info->type) {
1984 case TYPE_S3C6400:
1985 ourport->port.ops = &s3c64xx_serial_ops;
1986 break;
1987 case TYPE_APPLE_S5L:
1988 ourport->port.ops = &apple_s5l_serial_ops;
1989 break;
1990 }
1991
1992 if (np) {
1993 of_property_read_u32(np,
1994 "samsung,uart-fifosize", &ourport->port.fifosize);
1995
1996 if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
1997 switch (prop) {
1998 case 1:
1999 ourport->port.iotype = UPIO_MEM;
2000 break;
2001 case 4:
2002 ourport->port.iotype = UPIO_MEM32;
2003 break;
2004 default:
2005 dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n",
2006 prop);
2007 return -EINVAL;
2008 }
2009 }
2010 }
2011
2012 if (ourport->drv_data->fifosize[index])
2013 ourport->port.fifosize = ourport->drv_data->fifosize[index];
2014 else if (ourport->info->fifosize)
2015 ourport->port.fifosize = ourport->info->fifosize;
2016 ourport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SAMSUNG_CONSOLE);
2017
2018 /*
2019 * DMA transfers must be aligned at least to cache line size,
2020 * so find minimal transfer size suitable for DMA mode
2021 */
2022 ourport->min_dma_size = max_t(int, ourport->port.fifosize,
2023 dma_get_cache_alignment());
2024
2025 dev_dbg(&pdev->dev, "%s: initialising port %p...\n", __func__, ourport);
2026
2027 ret = s3c24xx_serial_init_port(ourport, pdev);
2028 if (ret < 0)
2029 return ret;
2030
2031 if (!s3c24xx_uart_drv.state) {
2032 ret = uart_register_driver(&s3c24xx_uart_drv);
2033 if (ret < 0) {
2034 pr_err("Failed to register Samsung UART driver\n");
2035 return ret;
2036 }
2037 }
2038
2039 dev_dbg(&pdev->dev, "%s: adding port\n", __func__);
2040 uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
2041 platform_set_drvdata(pdev, &ourport->port);
2042
2043 /*
2044 * Deactivate the clock enabled in s3c24xx_serial_init_port here,
2045 * so that a potential re-enablement through the pm-callback overlaps
2046 * and keeps the clock enabled in this case.
2047 */
2048 clk_disable_unprepare(ourport->clk);
2049 if (!IS_ERR(ourport->baudclk))
2050 clk_disable_unprepare(ourport->baudclk);
2051
2052 probe_index++;
2053
2054 return 0;
2055}
2056
2057static void s3c24xx_serial_remove(struct platform_device *dev)
2058{
2059 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
2060
2061 if (port) {
2062 uart_remove_one_port(&s3c24xx_uart_drv, port);
2063 }
2064
2065 uart_unregister_driver(&s3c24xx_uart_drv);
2066}
2067
2068/* UART power management code */
2069#ifdef CONFIG_PM_SLEEP
2070static int s3c24xx_serial_suspend(struct device *dev)
2071{
2072 struct uart_port *port = s3c24xx_dev_to_port(dev);
2073
2074 if (port)
2075 uart_suspend_port(&s3c24xx_uart_drv, port);
2076
2077 return 0;
2078}
2079
2080static int s3c24xx_serial_resume(struct device *dev)
2081{
2082 struct uart_port *port = s3c24xx_dev_to_port(dev);
2083 struct s3c24xx_uart_port *ourport = to_ourport(port);
2084
2085 if (port) {
2086 clk_prepare_enable(ourport->clk);
2087 if (!IS_ERR(ourport->baudclk))
2088 clk_prepare_enable(ourport->baudclk);
2089 s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
2090 if (!IS_ERR(ourport->baudclk))
2091 clk_disable_unprepare(ourport->baudclk);
2092 clk_disable_unprepare(ourport->clk);
2093
2094 uart_resume_port(&s3c24xx_uart_drv, port);
2095 }
2096
2097 return 0;
2098}
2099
2100static int s3c24xx_serial_resume_noirq(struct device *dev)
2101{
2102 struct uart_port *port = s3c24xx_dev_to_port(dev);
2103 struct s3c24xx_uart_port *ourport = to_ourport(port);
2104
2105 if (port) {
2106 /* restore IRQ mask */
2107 switch (ourport->info->type) {
2108 case TYPE_S3C6400: {
2109 unsigned int uintm = 0xf;
2110
2111 if (ourport->tx_enabled)
2112 uintm &= ~S3C64XX_UINTM_TXD_MSK;
2113 if (ourport->rx_enabled)
2114 uintm &= ~S3C64XX_UINTM_RXD_MSK;
2115 clk_prepare_enable(ourport->clk);
2116 if (!IS_ERR(ourport->baudclk))
2117 clk_prepare_enable(ourport->baudclk);
2118 wr_regl(port, S3C64XX_UINTM, uintm);
2119 if (!IS_ERR(ourport->baudclk))
2120 clk_disable_unprepare(ourport->baudclk);
2121 clk_disable_unprepare(ourport->clk);
2122 break;
2123 }
2124 case TYPE_APPLE_S5L: {
2125 unsigned int ucon;
2126 int ret;
2127
2128 ret = clk_prepare_enable(ourport->clk);
2129 if (ret) {
2130 dev_err(dev, "clk_enable clk failed: %d\n", ret);
2131 return ret;
2132 }
2133 if (!IS_ERR(ourport->baudclk)) {
2134 ret = clk_prepare_enable(ourport->baudclk);
2135 if (ret) {
2136 dev_err(dev, "clk_enable baudclk failed: %d\n", ret);
2137 clk_disable_unprepare(ourport->clk);
2138 return ret;
2139 }
2140 }
2141
2142 ucon = rd_regl(port, S3C2410_UCON);
2143
2144 ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK |
2145 APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
2146 APPLE_S5L_UCON_RXTO_ENA_MSK);
2147
2148 if (ourport->tx_enabled)
2149 ucon |= APPLE_S5L_UCON_TXTHRESH_ENA_MSK;
2150 if (ourport->rx_enabled)
2151 ucon |= APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
2152 APPLE_S5L_UCON_RXTO_ENA_MSK;
2153
2154 wr_regl(port, S3C2410_UCON, ucon);
2155
2156 if (!IS_ERR(ourport->baudclk))
2157 clk_disable_unprepare(ourport->baudclk);
2158 clk_disable_unprepare(ourport->clk);
2159 break;
2160 }
2161 default:
2162 break;
2163 }
2164 }
2165
2166 return 0;
2167}
2168
2169static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
2170 SET_SYSTEM_SLEEP_PM_OPS(s3c24xx_serial_suspend, s3c24xx_serial_resume)
2171 SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, s3c24xx_serial_resume_noirq)
2172};
2173#define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops)
2174
2175#else /* !CONFIG_PM_SLEEP */
2176
2177#define SERIAL_SAMSUNG_PM_OPS NULL
2178#endif /* CONFIG_PM_SLEEP */
2179
2180/* Console code */
2181
2182#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
2183
2184static struct uart_port *cons_uart;
2185
2186static int
2187s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
2188{
2189 const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
2190 unsigned long ufstat, utrstat;
2191
2192 if (ufcon & S3C2410_UFCON_FIFOMODE) {
2193 /* fifo mode - check amount of data in fifo registers... */
2194
2195 ufstat = rd_regl(port, S3C2410_UFSTAT);
2196 return (ufstat & info->tx_fifofull) ? 0 : 1;
2197 }
2198
2199 /* in non-fifo mode, we go and use the tx buffer empty */
2200
2201 utrstat = rd_regl(port, S3C2410_UTRSTAT);
2202 return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
2203}
2204
2205static bool
2206s3c24xx_port_configured(unsigned int ucon)
2207{
2208 /* consider the serial port configured if the tx/rx mode set */
2209 return (ucon & 0xf) != 0;
2210}
2211
2212#ifdef CONFIG_CONSOLE_POLL
2213/*
2214 * Console polling routines for writing and reading from the uart while
2215 * in an interrupt or debug context.
2216 */
2217
2218static int s3c24xx_serial_get_poll_char(struct uart_port *port)
2219{
2220 const struct s3c24xx_uart_port *ourport = to_ourport(port);
2221 unsigned int ufstat;
2222
2223 ufstat = rd_regl(port, S3C2410_UFSTAT);
2224 if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
2225 return NO_POLL_CHAR;
2226
2227 return rd_reg(port, S3C2410_URXH);
2228}
2229
2230static void s3c24xx_serial_put_poll_char(struct uart_port *port,
2231 unsigned char c)
2232{
2233 unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
2234 unsigned int ucon = rd_regl(port, S3C2410_UCON);
2235
2236 /* not possible to xmit on unconfigured port */
2237 if (!s3c24xx_port_configured(ucon))
2238 return;
2239
2240 while (!s3c24xx_serial_console_txrdy(port, ufcon))
2241 cpu_relax();
2242 wr_reg(port, S3C2410_UTXH, c);
2243}
2244
2245#endif /* CONFIG_CONSOLE_POLL */
2246
2247static void
2248s3c24xx_serial_console_putchar(struct uart_port *port, unsigned char ch)
2249{
2250 unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
2251
2252 while (!s3c24xx_serial_console_txrdy(port, ufcon))
2253 cpu_relax();
2254 wr_reg(port, S3C2410_UTXH, ch);
2255}
2256
2257static void
2258s3c24xx_serial_console_write(struct console *co, const char *s,
2259 unsigned int count)
2260{
2261 unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
2262 unsigned long flags;
2263 bool locked = true;
2264
2265 /* not possible to xmit on unconfigured port */
2266 if (!s3c24xx_port_configured(ucon))
2267 return;
2268
2269 if (cons_uart->sysrq)
2270 locked = false;
2271 else if (oops_in_progress)
2272 locked = uart_port_trylock_irqsave(cons_uart, &flags);
2273 else
2274 uart_port_lock_irqsave(cons_uart, &flags);
2275
2276 uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
2277
2278 if (locked)
2279 uart_port_unlock_irqrestore(cons_uart, flags);
2280}
2281
2282/* Shouldn't be __init, as it can be instantiated from other module */
2283static void
2284s3c24xx_serial_get_options(struct uart_port *port, int *baud,
2285 int *parity, int *bits)
2286{
2287 struct clk *clk;
2288 unsigned int ulcon;
2289 unsigned int ucon;
2290 unsigned int ubrdiv;
2291 unsigned long rate;
2292 unsigned int clk_sel;
2293 char clk_name[MAX_CLK_NAME_LENGTH];
2294
2295 ulcon = rd_regl(port, S3C2410_ULCON);
2296 ucon = rd_regl(port, S3C2410_UCON);
2297 ubrdiv = rd_regl(port, S3C2410_UBRDIV);
2298
2299 if (s3c24xx_port_configured(ucon)) {
2300 switch (ulcon & S3C2410_LCON_CSMASK) {
2301 case S3C2410_LCON_CS5:
2302 *bits = 5;
2303 break;
2304 case S3C2410_LCON_CS6:
2305 *bits = 6;
2306 break;
2307 case S3C2410_LCON_CS7:
2308 *bits = 7;
2309 break;
2310 case S3C2410_LCON_CS8:
2311 default:
2312 *bits = 8;
2313 break;
2314 }
2315
2316 switch (ulcon & S3C2410_LCON_PMASK) {
2317 case S3C2410_LCON_PEVEN:
2318 *parity = 'e';
2319 break;
2320
2321 case S3C2410_LCON_PODD:
2322 *parity = 'o';
2323 break;
2324
2325 case S3C2410_LCON_PNONE:
2326 default:
2327 *parity = 'n';
2328 }
2329
2330 /* now calculate the baud rate */
2331
2332 clk_sel = s3c24xx_serial_getsource(port);
2333 sprintf(clk_name, "clk_uart_baud%d", clk_sel);
2334
2335 clk = clk_get(port->dev, clk_name);
2336 if (!IS_ERR(clk))
2337 rate = clk_get_rate(clk);
2338 else
2339 rate = 1;
2340
2341 *baud = rate / (16 * (ubrdiv + 1));
2342 dev_dbg(port->dev, "calculated baud %d\n", *baud);
2343 }
2344}
2345
2346/* Shouldn't be __init, as it can be instantiated from other module */
2347static int
2348s3c24xx_serial_console_setup(struct console *co, char *options)
2349{
2350 struct uart_port *port;
2351 int baud = 9600;
2352 int bits = 8;
2353 int parity = 'n';
2354 int flow = 'n';
2355
2356 /* is this a valid port */
2357
2358 if (co->index == -1 || co->index >= UART_NR)
2359 co->index = 0;
2360
2361 port = &s3c24xx_serial_ports[co->index].port;
2362
2363 /* is the port configured? */
2364
2365 if (port->mapbase == 0x0)
2366 return -ENODEV;
2367
2368 cons_uart = port;
2369
2370 /*
2371 * Check whether an invalid uart number has been specified, and
2372 * if so, search for the first available port that does have
2373 * console support.
2374 */
2375 if (options)
2376 uart_parse_options(options, &baud, &parity, &bits, &flow);
2377 else
2378 s3c24xx_serial_get_options(port, &baud, &parity, &bits);
2379
2380 dev_dbg(port->dev, "baud %d\n", baud);
2381
2382 return uart_set_options(port, co, baud, parity, bits, flow);
2383}
2384
2385static struct console s3c24xx_serial_console = {
2386 .name = S3C24XX_SERIAL_NAME,
2387 .device = uart_console_device,
2388 .flags = CON_PRINTBUFFER,
2389 .index = -1,
2390 .write = s3c24xx_serial_console_write,
2391 .setup = s3c24xx_serial_console_setup,
2392 .data = &s3c24xx_uart_drv,
2393};
2394#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
2395
2396#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
2397static const struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
2398 .info = {
2399 .name = "Samsung S3C6400 UART",
2400 .type = TYPE_S3C6400,
2401 .port_type = PORT_S3C6400,
2402 .fifosize = 64,
2403 .has_divslot = 1,
2404 .rx_fifomask = S3C2440_UFSTAT_RXMASK,
2405 .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
2406 .rx_fifofull = S3C2440_UFSTAT_RXFULL,
2407 .tx_fifofull = S3C2440_UFSTAT_TXFULL,
2408 .tx_fifomask = S3C2440_UFSTAT_TXMASK,
2409 .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
2410 .def_clk_sel = S3C2410_UCON_CLKSEL2,
2411 .num_clks = 4,
2412 .clksel_mask = S3C6400_UCON_CLKMASK,
2413 .clksel_shift = S3C6400_UCON_CLKSHIFT,
2414 },
2415 .def_cfg = {
2416 .ucon = S3C2410_UCON_DEFAULT,
2417 .ufcon = S3C2410_UFCON_DEFAULT,
2418 },
2419};
2420#define S3C6400_SERIAL_DRV_DATA (&s3c6400_serial_drv_data)
2421#else
2422#define S3C6400_SERIAL_DRV_DATA NULL
2423#endif
2424
2425#ifdef CONFIG_CPU_S5PV210
2426static const struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
2427 .info = {
2428 .name = "Samsung S5PV210 UART",
2429 .type = TYPE_S3C6400,
2430 .port_type = PORT_S3C6400,
2431 .has_divslot = 1,
2432 .rx_fifomask = S5PV210_UFSTAT_RXMASK,
2433 .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
2434 .rx_fifofull = S5PV210_UFSTAT_RXFULL,
2435 .tx_fifofull = S5PV210_UFSTAT_TXFULL,
2436 .tx_fifomask = S5PV210_UFSTAT_TXMASK,
2437 .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT,
2438 .def_clk_sel = S3C2410_UCON_CLKSEL0,
2439 .num_clks = 2,
2440 .clksel_mask = S5PV210_UCON_CLKMASK,
2441 .clksel_shift = S5PV210_UCON_CLKSHIFT,
2442 },
2443 .def_cfg = {
2444 .ucon = S5PV210_UCON_DEFAULT,
2445 .ufcon = S5PV210_UFCON_DEFAULT,
2446 },
2447 .fifosize = { 256, 64, 16, 16 },
2448};
2449#define S5PV210_SERIAL_DRV_DATA (&s5pv210_serial_drv_data)
2450#else
2451#define S5PV210_SERIAL_DRV_DATA NULL
2452#endif
2453
2454#if defined(CONFIG_ARCH_EXYNOS)
2455#define EXYNOS_COMMON_SERIAL_DRV_DATA() \
2456 .info = { \
2457 .name = "Samsung Exynos UART", \
2458 .type = TYPE_S3C6400, \
2459 .port_type = PORT_S3C6400, \
2460 .has_divslot = 1, \
2461 .rx_fifomask = S5PV210_UFSTAT_RXMASK, \
2462 .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \
2463 .rx_fifofull = S5PV210_UFSTAT_RXFULL, \
2464 .tx_fifofull = S5PV210_UFSTAT_TXFULL, \
2465 .tx_fifomask = S5PV210_UFSTAT_TXMASK, \
2466 .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \
2467 .def_clk_sel = S3C2410_UCON_CLKSEL0, \
2468 .num_clks = 1, \
2469 .clksel_mask = 0, \
2470 .clksel_shift = 0, \
2471 }, \
2472 .def_cfg = { \
2473 .ucon = S5PV210_UCON_DEFAULT, \
2474 .ufcon = S5PV210_UFCON_DEFAULT, \
2475 .has_fracval = 1, \
2476 } \
2477
2478static const struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
2479 EXYNOS_COMMON_SERIAL_DRV_DATA(),
2480 .fifosize = { 256, 64, 16, 16 },
2481};
2482
2483static const struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
2484 EXYNOS_COMMON_SERIAL_DRV_DATA(),
2485 .fifosize = { 64, 256, 16, 256 },
2486};
2487
2488static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data = {
2489 EXYNOS_COMMON_SERIAL_DRV_DATA(),
2490 .fifosize = { 256, 64, 64, 64 },
2491};
2492
2493/*
2494 * Common drv_data struct for platforms that specify samsung,uart-fifosize in
2495 * device tree.
2496 */
2497static const struct s3c24xx_serial_drv_data exynos_fifoszdt_serial_drv_data = {
2498 EXYNOS_COMMON_SERIAL_DRV_DATA(),
2499 .fifosize = { 0 },
2500};
2501
2502#define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data)
2503#define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data)
2504#define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data)
2505#define EXYNOS_FIFOSZDT_DRV_DATA (&exynos_fifoszdt_serial_drv_data)
2506
2507#else
2508#define EXYNOS4210_SERIAL_DRV_DATA NULL
2509#define EXYNOS5433_SERIAL_DRV_DATA NULL
2510#define EXYNOS850_SERIAL_DRV_DATA NULL
2511#define EXYNOS_FIFOSZDT_DRV_DATA NULL
2512#endif
2513
2514#ifdef CONFIG_ARCH_APPLE
2515static const struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
2516 .info = {
2517 .name = "Apple S5L UART",
2518 .type = TYPE_APPLE_S5L,
2519 .port_type = PORT_8250,
2520 .fifosize = 16,
2521 .rx_fifomask = S3C2410_UFSTAT_RXMASK,
2522 .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
2523 .rx_fifofull = S3C2410_UFSTAT_RXFULL,
2524 .tx_fifofull = S3C2410_UFSTAT_TXFULL,
2525 .tx_fifomask = S3C2410_UFSTAT_TXMASK,
2526 .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
2527 .def_clk_sel = S3C2410_UCON_CLKSEL0,
2528 .num_clks = 1,
2529 .clksel_mask = 0,
2530 .clksel_shift = 0,
2531 .ucon_mask = APPLE_S5L_UCON_MASK,
2532 },
2533 .def_cfg = {
2534 .ucon = APPLE_S5L_UCON_DEFAULT,
2535 .ufcon = S3C2410_UFCON_DEFAULT,
2536 },
2537};
2538#define S5L_SERIAL_DRV_DATA (&s5l_serial_drv_data)
2539#else
2540#define S5L_SERIAL_DRV_DATA NULL
2541#endif
2542
2543#if defined(CONFIG_ARCH_ARTPEC)
2544static const struct s3c24xx_serial_drv_data artpec8_serial_drv_data = {
2545 .info = {
2546 .name = "Axis ARTPEC-8 UART",
2547 .type = TYPE_S3C6400,
2548 .port_type = PORT_S3C6400,
2549 .fifosize = 64,
2550 .has_divslot = 1,
2551 .rx_fifomask = S5PV210_UFSTAT_RXMASK,
2552 .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
2553 .rx_fifofull = S5PV210_UFSTAT_RXFULL,
2554 .tx_fifofull = S5PV210_UFSTAT_TXFULL,
2555 .tx_fifomask = S5PV210_UFSTAT_TXMASK,
2556 .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT,
2557 .def_clk_sel = S3C2410_UCON_CLKSEL0,
2558 .num_clks = 1,
2559 .clksel_mask = 0,
2560 .clksel_shift = 0,
2561 },
2562 .def_cfg = {
2563 .ucon = S5PV210_UCON_DEFAULT,
2564 .ufcon = S5PV210_UFCON_DEFAULT,
2565 .has_fracval = 1,
2566 }
2567};
2568#define ARTPEC8_SERIAL_DRV_DATA (&artpec8_serial_drv_data)
2569#else
2570#define ARTPEC8_SERIAL_DRV_DATA (NULL)
2571#endif
2572
2573static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
2574 {
2575 .name = "s3c6400-uart",
2576 .driver_data = (kernel_ulong_t)S3C6400_SERIAL_DRV_DATA,
2577 }, {
2578 .name = "s5pv210-uart",
2579 .driver_data = (kernel_ulong_t)S5PV210_SERIAL_DRV_DATA,
2580 }, {
2581 .name = "exynos4210-uart",
2582 .driver_data = (kernel_ulong_t)EXYNOS4210_SERIAL_DRV_DATA,
2583 }, {
2584 .name = "exynos5433-uart",
2585 .driver_data = (kernel_ulong_t)EXYNOS5433_SERIAL_DRV_DATA,
2586 }, {
2587 .name = "s5l-uart",
2588 .driver_data = (kernel_ulong_t)S5L_SERIAL_DRV_DATA,
2589 }, {
2590 .name = "exynos850-uart",
2591 .driver_data = (kernel_ulong_t)EXYNOS850_SERIAL_DRV_DATA,
2592 }, {
2593 .name = "artpec8-uart",
2594 .driver_data = (kernel_ulong_t)ARTPEC8_SERIAL_DRV_DATA,
2595 }, {
2596 .name = "gs101-uart",
2597 .driver_data = (kernel_ulong_t)EXYNOS_FIFOSZDT_DRV_DATA,
2598 },
2599 { },
2600};
2601MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
2602
2603#ifdef CONFIG_OF
2604static const struct of_device_id s3c24xx_uart_dt_match[] = {
2605 { .compatible = "samsung,s3c6400-uart",
2606 .data = S3C6400_SERIAL_DRV_DATA },
2607 { .compatible = "samsung,s5pv210-uart",
2608 .data = S5PV210_SERIAL_DRV_DATA },
2609 { .compatible = "samsung,exynos4210-uart",
2610 .data = EXYNOS4210_SERIAL_DRV_DATA },
2611 { .compatible = "samsung,exynos5433-uart",
2612 .data = EXYNOS5433_SERIAL_DRV_DATA },
2613 { .compatible = "apple,s5l-uart",
2614 .data = S5L_SERIAL_DRV_DATA },
2615 { .compatible = "samsung,exynos850-uart",
2616 .data = EXYNOS850_SERIAL_DRV_DATA },
2617 { .compatible = "axis,artpec8-uart",
2618 .data = ARTPEC8_SERIAL_DRV_DATA },
2619 { .compatible = "google,gs101-uart",
2620 .data = EXYNOS_FIFOSZDT_DRV_DATA },
2621 {},
2622};
2623MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
2624#endif
2625
2626static struct platform_driver samsung_serial_driver = {
2627 .probe = s3c24xx_serial_probe,
2628 .remove_new = s3c24xx_serial_remove,
2629 .id_table = s3c24xx_serial_driver_ids,
2630 .driver = {
2631 .name = "samsung-uart",
2632 .pm = SERIAL_SAMSUNG_PM_OPS,
2633 .of_match_table = of_match_ptr(s3c24xx_uart_dt_match),
2634 },
2635};
2636
2637static int __init samsung_serial_init(void)
2638{
2639 int ret;
2640
2641 s3c24xx_serial_register_console();
2642
2643 ret = platform_driver_register(&samsung_serial_driver);
2644 if (ret) {
2645 s3c24xx_serial_unregister_console();
2646 return ret;
2647 }
2648
2649 return 0;
2650}
2651
2652static void __exit samsung_serial_exit(void)
2653{
2654 platform_driver_unregister(&samsung_serial_driver);
2655 s3c24xx_serial_unregister_console();
2656}
2657
2658module_init(samsung_serial_init);
2659module_exit(samsung_serial_exit);
2660
2661#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
2662/*
2663 * Early console.
2664 */
2665
2666static void wr_reg_barrier(const struct uart_port *port, u32 reg, u32 val)
2667{
2668 switch (port->iotype) {
2669 case UPIO_MEM:
2670 writeb(val, portaddr(port, reg));
2671 break;
2672 case UPIO_MEM32:
2673 writel(val, portaddr(port, reg));
2674 break;
2675 }
2676}
2677
2678struct samsung_early_console_data {
2679 u32 txfull_mask;
2680 u32 rxfifo_mask;
2681};
2682
2683static void samsung_early_busyuart(const struct uart_port *port)
2684{
2685 while (!(readl(port->membase + S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXFE))
2686 ;
2687}
2688
2689static void samsung_early_busyuart_fifo(const struct uart_port *port)
2690{
2691 const struct samsung_early_console_data *data = port->private_data;
2692
2693 while (readl(port->membase + S3C2410_UFSTAT) & data->txfull_mask)
2694 ;
2695}
2696
2697static void samsung_early_putc(struct uart_port *port, unsigned char c)
2698{
2699 if (readl(port->membase + S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE)
2700 samsung_early_busyuart_fifo(port);
2701 else
2702 samsung_early_busyuart(port);
2703
2704 wr_reg_barrier(port, S3C2410_UTXH, c);
2705}
2706
2707static void samsung_early_write(struct console *con, const char *s,
2708 unsigned int n)
2709{
2710 struct earlycon_device *dev = con->data;
2711
2712 uart_console_write(&dev->port, s, n, samsung_early_putc);
2713}
2714
2715static int samsung_early_read(struct console *con, char *s, unsigned int n)
2716{
2717 struct earlycon_device *dev = con->data;
2718 const struct samsung_early_console_data *data = dev->port.private_data;
2719 int ch, ufstat, num_read = 0;
2720
2721 while (num_read < n) {
2722 ufstat = rd_regl(&dev->port, S3C2410_UFSTAT);
2723 if (!(ufstat & data->rxfifo_mask))
2724 break;
2725 ch = rd_reg(&dev->port, S3C2410_URXH);
2726 if (ch == NO_POLL_CHAR)
2727 break;
2728
2729 s[num_read++] = ch;
2730 }
2731
2732 return num_read;
2733}
2734
2735static int __init samsung_early_console_setup(struct earlycon_device *device,
2736 const char *opt)
2737{
2738 if (!device->port.membase)
2739 return -ENODEV;
2740
2741 device->con->write = samsung_early_write;
2742 device->con->read = samsung_early_read;
2743 return 0;
2744}
2745
2746/* S3C2410 */
2747static struct samsung_early_console_data s3c2410_early_console_data = {
2748 .txfull_mask = S3C2410_UFSTAT_TXFULL,
2749 .rxfifo_mask = S3C2410_UFSTAT_RXFULL | S3C2410_UFSTAT_RXMASK,
2750};
2751
2752/* S3C64xx */
2753static struct samsung_early_console_data s3c2440_early_console_data = {
2754 .txfull_mask = S3C2440_UFSTAT_TXFULL,
2755 .rxfifo_mask = S3C2440_UFSTAT_RXFULL | S3C2440_UFSTAT_RXMASK,
2756};
2757
2758static int __init s3c2440_early_console_setup(struct earlycon_device *device,
2759 const char *opt)
2760{
2761 device->port.private_data = &s3c2440_early_console_data;
2762 return samsung_early_console_setup(device, opt);
2763}
2764
2765OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart",
2766 s3c2440_early_console_setup);
2767
2768/* S5PV210, Exynos */
2769static struct samsung_early_console_data s5pv210_early_console_data = {
2770 .txfull_mask = S5PV210_UFSTAT_TXFULL,
2771 .rxfifo_mask = S5PV210_UFSTAT_RXFULL | S5PV210_UFSTAT_RXMASK,
2772};
2773
2774static int __init s5pv210_early_console_setup(struct earlycon_device *device,
2775 const char *opt)
2776{
2777 device->port.private_data = &s5pv210_early_console_data;
2778 return samsung_early_console_setup(device, opt);
2779}
2780
2781OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart",
2782 s5pv210_early_console_setup);
2783OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart",
2784 s5pv210_early_console_setup);
2785OF_EARLYCON_DECLARE(artpec8, "axis,artpec8-uart",
2786 s5pv210_early_console_setup);
2787
2788/* Apple S5L */
2789static int __init apple_s5l_early_console_setup(struct earlycon_device *device,
2790 const char *opt)
2791{
2792 /* Close enough to S3C2410 for earlycon... */
2793 device->port.private_data = &s3c2410_early_console_data;
2794
2795#ifdef CONFIG_ARM64
2796 /* ... but we need to override the existing fixmap entry as nGnRnE */
2797 __set_fixmap(FIX_EARLYCON_MEM_BASE, device->port.mapbase,
2798 __pgprot(PROT_DEVICE_nGnRnE));
2799#endif
2800 return samsung_early_console_setup(device, opt);
2801}
2802
2803OF_EARLYCON_DECLARE(s5l, "apple,s5l-uart", apple_s5l_early_console_setup);
2804#endif
2805
2806MODULE_ALIAS("platform:samsung-uart");
2807MODULE_DESCRIPTION("Samsung SoC Serial port driver");
2808MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
2809MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Driver core for Samsung SoC onboard UARTs.
4 *
5 * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
6 * http://armlinux.simtec.co.uk/
7 */
8
9/* Note on 2410 error handling
10 *
11 * The s3c2410 manual has a love/hate affair with the contents of the
12 * UERSTAT register in the UART blocks, and keeps marking some of the
13 * error bits as reserved. Having checked with the s3c2410x01,
14 * it copes with BREAKs properly, so I am happy to ignore the RESERVED
15 * feature from the latter versions of the manual.
16 *
17 * If it becomes aparrent that latter versions of the 2410 remove these
18 * bits, then action will have to be taken to differentiate the versions
19 * and change the policy on BREAK
20 *
21 * BJD, 04-Nov-2004
22 */
23
24#include <linux/dmaengine.h>
25#include <linux/dma-mapping.h>
26#include <linux/slab.h>
27#include <linux/module.h>
28#include <linux/ioport.h>
29#include <linux/io.h>
30#include <linux/platform_device.h>
31#include <linux/init.h>
32#include <linux/sysrq.h>
33#include <linux/console.h>
34#include <linux/tty.h>
35#include <linux/tty_flip.h>
36#include <linux/serial_core.h>
37#include <linux/serial.h>
38#include <linux/serial_s3c.h>
39#include <linux/delay.h>
40#include <linux/clk.h>
41#include <linux/cpufreq.h>
42#include <linux/of.h>
43#include <asm/irq.h>
44
45/* UART name and device definitions */
46
47#define S3C24XX_SERIAL_NAME "ttySAC"
48#define S3C24XX_SERIAL_MAJOR 204
49#define S3C24XX_SERIAL_MINOR 64
50
51#define S3C24XX_TX_PIO 1
52#define S3C24XX_TX_DMA 2
53#define S3C24XX_RX_PIO 1
54#define S3C24XX_RX_DMA 2
55
56/* flag to ignore all characters coming in */
57#define RXSTAT_DUMMY_READ (0x10000000)
58
59enum s3c24xx_port_type {
60 TYPE_S3C24XX,
61 TYPE_S3C6400,
62 TYPE_APPLE_S5L,
63};
64
65struct s3c24xx_uart_info {
66 char *name;
67 enum s3c24xx_port_type type;
68 unsigned int port_type;
69 unsigned int fifosize;
70 unsigned long rx_fifomask;
71 unsigned long rx_fifoshift;
72 unsigned long rx_fifofull;
73 unsigned long tx_fifomask;
74 unsigned long tx_fifoshift;
75 unsigned long tx_fifofull;
76 unsigned int def_clk_sel;
77 unsigned long num_clks;
78 unsigned long clksel_mask;
79 unsigned long clksel_shift;
80 unsigned long ucon_mask;
81
82 /* uart port features */
83
84 unsigned int has_divslot:1;
85};
86
87struct s3c24xx_serial_drv_data {
88 struct s3c24xx_uart_info *info;
89 struct s3c2410_uartcfg *def_cfg;
90 unsigned int fifosize[CONFIG_SERIAL_SAMSUNG_UARTS];
91};
92
93struct s3c24xx_uart_dma {
94 unsigned int rx_chan_id;
95 unsigned int tx_chan_id;
96
97 struct dma_slave_config rx_conf;
98 struct dma_slave_config tx_conf;
99
100 struct dma_chan *rx_chan;
101 struct dma_chan *tx_chan;
102
103 dma_addr_t rx_addr;
104 dma_addr_t tx_addr;
105
106 dma_cookie_t rx_cookie;
107 dma_cookie_t tx_cookie;
108
109 char *rx_buf;
110
111 dma_addr_t tx_transfer_addr;
112
113 size_t rx_size;
114 size_t tx_size;
115
116 struct dma_async_tx_descriptor *tx_desc;
117 struct dma_async_tx_descriptor *rx_desc;
118
119 int tx_bytes_requested;
120 int rx_bytes_requested;
121};
122
123struct s3c24xx_uart_port {
124 unsigned char rx_claimed;
125 unsigned char tx_claimed;
126 unsigned char rx_enabled;
127 unsigned char tx_enabled;
128 unsigned int pm_level;
129 unsigned long baudclk_rate;
130 unsigned int min_dma_size;
131
132 unsigned int rx_irq;
133 unsigned int tx_irq;
134
135 unsigned int tx_in_progress;
136 unsigned int tx_mode;
137 unsigned int rx_mode;
138
139 struct s3c24xx_uart_info *info;
140 struct clk *clk;
141 struct clk *baudclk;
142 struct uart_port port;
143 struct s3c24xx_serial_drv_data *drv_data;
144
145 /* reference to platform data */
146 struct s3c2410_uartcfg *cfg;
147
148 struct s3c24xx_uart_dma *dma;
149
150#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
151 struct notifier_block freq_transition;
152#endif
153};
154
155static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport);
156
157/* conversion functions */
158
159#define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev)
160
161/* register access controls */
162
163#define portaddr(port, reg) ((port)->membase + (reg))
164#define portaddrl(port, reg) \
165 ((unsigned long *)(unsigned long)((port)->membase + (reg)))
166
167static u32 rd_reg(struct uart_port *port, u32 reg)
168{
169 switch (port->iotype) {
170 case UPIO_MEM:
171 return readb_relaxed(portaddr(port, reg));
172 case UPIO_MEM32:
173 return readl_relaxed(portaddr(port, reg));
174 default:
175 return 0;
176 }
177 return 0;
178}
179
180#define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
181
182static void wr_reg(struct uart_port *port, u32 reg, u32 val)
183{
184 switch (port->iotype) {
185 case UPIO_MEM:
186 writeb_relaxed(val, portaddr(port, reg));
187 break;
188 case UPIO_MEM32:
189 writel_relaxed(val, portaddr(port, reg));
190 break;
191 }
192}
193
194#define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
195
196/* Byte-order aware bit setting/clearing functions. */
197
198static inline void s3c24xx_set_bit(struct uart_port *port, int idx,
199 unsigned int reg)
200{
201 unsigned long flags;
202 u32 val;
203
204 local_irq_save(flags);
205 val = rd_regl(port, reg);
206 val |= (1 << idx);
207 wr_regl(port, reg, val);
208 local_irq_restore(flags);
209}
210
211static inline void s3c24xx_clear_bit(struct uart_port *port, int idx,
212 unsigned int reg)
213{
214 unsigned long flags;
215 u32 val;
216
217 local_irq_save(flags);
218 val = rd_regl(port, reg);
219 val &= ~(1 << idx);
220 wr_regl(port, reg, val);
221 local_irq_restore(flags);
222}
223
224static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
225{
226 return container_of(port, struct s3c24xx_uart_port, port);
227}
228
229/* translate a port to the device name */
230
231static inline const char *s3c24xx_serial_portname(struct uart_port *port)
232{
233 return to_platform_device(port->dev)->name;
234}
235
236static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
237{
238 return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE;
239}
240
241static void s3c24xx_serial_rx_enable(struct uart_port *port)
242{
243 struct s3c24xx_uart_port *ourport = to_ourport(port);
244 unsigned long flags;
245 unsigned int ucon, ufcon;
246 int count = 10000;
247
248 spin_lock_irqsave(&port->lock, flags);
249
250 while (--count && !s3c24xx_serial_txempty_nofifo(port))
251 udelay(100);
252
253 ufcon = rd_regl(port, S3C2410_UFCON);
254 ufcon |= S3C2410_UFCON_RESETRX;
255 wr_regl(port, S3C2410_UFCON, ufcon);
256
257 ucon = rd_regl(port, S3C2410_UCON);
258 ucon |= S3C2410_UCON_RXIRQMODE;
259 wr_regl(port, S3C2410_UCON, ucon);
260
261 ourport->rx_enabled = 1;
262 spin_unlock_irqrestore(&port->lock, flags);
263}
264
265static void s3c24xx_serial_rx_disable(struct uart_port *port)
266{
267 struct s3c24xx_uart_port *ourport = to_ourport(port);
268 unsigned long flags;
269 unsigned int ucon;
270
271 spin_lock_irqsave(&port->lock, flags);
272
273 ucon = rd_regl(port, S3C2410_UCON);
274 ucon &= ~S3C2410_UCON_RXIRQMODE;
275 wr_regl(port, S3C2410_UCON, ucon);
276
277 ourport->rx_enabled = 0;
278 spin_unlock_irqrestore(&port->lock, flags);
279}
280
281static void s3c24xx_serial_stop_tx(struct uart_port *port)
282{
283 struct s3c24xx_uart_port *ourport = to_ourport(port);
284 struct s3c24xx_uart_dma *dma = ourport->dma;
285 struct circ_buf *xmit = &port->state->xmit;
286 struct dma_tx_state state;
287 int count;
288
289 if (!ourport->tx_enabled)
290 return;
291
292 switch (ourport->info->type) {
293 case TYPE_S3C6400:
294 s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
295 break;
296 case TYPE_APPLE_S5L:
297 s3c24xx_clear_bit(port, APPLE_S5L_UCON_TXTHRESH_ENA, S3C2410_UCON);
298 break;
299 default:
300 disable_irq_nosync(ourport->tx_irq);
301 break;
302 }
303
304 if (dma && dma->tx_chan && ourport->tx_in_progress == S3C24XX_TX_DMA) {
305 dmaengine_pause(dma->tx_chan);
306 dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
307 dmaengine_terminate_all(dma->tx_chan);
308 dma_sync_single_for_cpu(ourport->port.dev,
309 dma->tx_transfer_addr, dma->tx_size, DMA_TO_DEVICE);
310 async_tx_ack(dma->tx_desc);
311 count = dma->tx_bytes_requested - state.residue;
312 xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
313 port->icount.tx += count;
314 }
315
316 ourport->tx_enabled = 0;
317 ourport->tx_in_progress = 0;
318
319 if (port->flags & UPF_CONS_FLOW)
320 s3c24xx_serial_rx_enable(port);
321
322 ourport->tx_mode = 0;
323}
324
325static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport);
326
327static void s3c24xx_serial_tx_dma_complete(void *args)
328{
329 struct s3c24xx_uart_port *ourport = args;
330 struct uart_port *port = &ourport->port;
331 struct circ_buf *xmit = &port->state->xmit;
332 struct s3c24xx_uart_dma *dma = ourport->dma;
333 struct dma_tx_state state;
334 unsigned long flags;
335 int count;
336
337 dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
338 count = dma->tx_bytes_requested - state.residue;
339 async_tx_ack(dma->tx_desc);
340
341 dma_sync_single_for_cpu(ourport->port.dev, dma->tx_transfer_addr,
342 dma->tx_size, DMA_TO_DEVICE);
343
344 spin_lock_irqsave(&port->lock, flags);
345
346 xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
347 port->icount.tx += count;
348 ourport->tx_in_progress = 0;
349
350 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
351 uart_write_wakeup(port);
352
353 s3c24xx_serial_start_next_tx(ourport);
354 spin_unlock_irqrestore(&port->lock, flags);
355}
356
357static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
358{
359 struct uart_port *port = &ourport->port;
360 u32 ucon;
361
362 /* Mask Tx interrupt */
363 switch (ourport->info->type) {
364 case TYPE_S3C6400:
365 s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
366 break;
367 case TYPE_APPLE_S5L:
368 WARN_ON(1); // No DMA
369 break;
370 default:
371 disable_irq_nosync(ourport->tx_irq);
372 break;
373 }
374
375 /* Enable tx dma mode */
376 ucon = rd_regl(port, S3C2410_UCON);
377 ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK);
378 ucon |= (dma_get_cache_alignment() >= 16) ?
379 S3C64XX_UCON_TXBURST_16 : S3C64XX_UCON_TXBURST_1;
380 ucon |= S3C64XX_UCON_TXMODE_DMA;
381 wr_regl(port, S3C2410_UCON, ucon);
382
383 ourport->tx_mode = S3C24XX_TX_DMA;
384}
385
386static void enable_tx_pio(struct s3c24xx_uart_port *ourport)
387{
388 struct uart_port *port = &ourport->port;
389 u32 ucon, ufcon;
390
391 /* Set ufcon txtrig */
392 ourport->tx_in_progress = S3C24XX_TX_PIO;
393 ufcon = rd_regl(port, S3C2410_UFCON);
394 wr_regl(port, S3C2410_UFCON, ufcon);
395
396 /* Enable tx pio mode */
397 ucon = rd_regl(port, S3C2410_UCON);
398 ucon &= ~(S3C64XX_UCON_TXMODE_MASK);
399 ucon |= S3C64XX_UCON_TXMODE_CPU;
400 wr_regl(port, S3C2410_UCON, ucon);
401
402 /* Unmask Tx interrupt */
403 switch (ourport->info->type) {
404 case TYPE_S3C6400:
405 s3c24xx_clear_bit(port, S3C64XX_UINTM_TXD,
406 S3C64XX_UINTM);
407 break;
408 case TYPE_APPLE_S5L:
409 ucon |= APPLE_S5L_UCON_TXTHRESH_ENA_MSK;
410 wr_regl(port, S3C2410_UCON, ucon);
411 break;
412 default:
413 enable_irq(ourport->tx_irq);
414 break;
415 }
416
417 ourport->tx_mode = S3C24XX_TX_PIO;
418
419 /*
420 * The Apple version only has edge triggered TX IRQs, so we need
421 * to kick off the process by sending some characters here.
422 */
423 if (ourport->info->type == TYPE_APPLE_S5L)
424 s3c24xx_serial_tx_chars(ourport);
425}
426
427static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport)
428{
429 if (ourport->tx_mode != S3C24XX_TX_PIO)
430 enable_tx_pio(ourport);
431}
432
433static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport,
434 unsigned int count)
435{
436 struct uart_port *port = &ourport->port;
437 struct circ_buf *xmit = &port->state->xmit;
438 struct s3c24xx_uart_dma *dma = ourport->dma;
439
440 if (ourport->tx_mode != S3C24XX_TX_DMA)
441 enable_tx_dma(ourport);
442
443 dma->tx_size = count & ~(dma_get_cache_alignment() - 1);
444 dma->tx_transfer_addr = dma->tx_addr + xmit->tail;
445
446 dma_sync_single_for_device(ourport->port.dev, dma->tx_transfer_addr,
447 dma->tx_size, DMA_TO_DEVICE);
448
449 dma->tx_desc = dmaengine_prep_slave_single(dma->tx_chan,
450 dma->tx_transfer_addr, dma->tx_size,
451 DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
452 if (!dma->tx_desc) {
453 dev_err(ourport->port.dev, "Unable to get desc for Tx\n");
454 return -EIO;
455 }
456
457 dma->tx_desc->callback = s3c24xx_serial_tx_dma_complete;
458 dma->tx_desc->callback_param = ourport;
459 dma->tx_bytes_requested = dma->tx_size;
460
461 ourport->tx_in_progress = S3C24XX_TX_DMA;
462 dma->tx_cookie = dmaengine_submit(dma->tx_desc);
463 dma_async_issue_pending(dma->tx_chan);
464 return 0;
465}
466
467static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport)
468{
469 struct uart_port *port = &ourport->port;
470 struct circ_buf *xmit = &port->state->xmit;
471 unsigned long count;
472
473 /* Get data size up to the end of buffer */
474 count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
475
476 if (!count) {
477 s3c24xx_serial_stop_tx(port);
478 return;
479 }
480
481 if (!ourport->dma || !ourport->dma->tx_chan ||
482 count < ourport->min_dma_size ||
483 xmit->tail & (dma_get_cache_alignment() - 1))
484 s3c24xx_serial_start_tx_pio(ourport);
485 else
486 s3c24xx_serial_start_tx_dma(ourport, count);
487}
488
489static void s3c24xx_serial_start_tx(struct uart_port *port)
490{
491 struct s3c24xx_uart_port *ourport = to_ourport(port);
492 struct circ_buf *xmit = &port->state->xmit;
493
494 if (!ourport->tx_enabled) {
495 if (port->flags & UPF_CONS_FLOW)
496 s3c24xx_serial_rx_disable(port);
497
498 ourport->tx_enabled = 1;
499 if (!ourport->dma || !ourport->dma->tx_chan)
500 s3c24xx_serial_start_tx_pio(ourport);
501 }
502
503 if (ourport->dma && ourport->dma->tx_chan) {
504 if (!uart_circ_empty(xmit) && !ourport->tx_in_progress)
505 s3c24xx_serial_start_next_tx(ourport);
506 }
507}
508
509static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport,
510 struct tty_port *tty, int count)
511{
512 struct s3c24xx_uart_dma *dma = ourport->dma;
513 int copied;
514
515 if (!count)
516 return;
517
518 dma_sync_single_for_cpu(ourport->port.dev, dma->rx_addr,
519 dma->rx_size, DMA_FROM_DEVICE);
520
521 ourport->port.icount.rx += count;
522 if (!tty) {
523 dev_err(ourport->port.dev, "No tty port\n");
524 return;
525 }
526 copied = tty_insert_flip_string(tty,
527 ((unsigned char *)(ourport->dma->rx_buf)), count);
528 if (copied != count) {
529 WARN_ON(1);
530 dev_err(ourport->port.dev, "RxData copy to tty layer failed\n");
531 }
532}
533
534static void s3c24xx_serial_stop_rx(struct uart_port *port)
535{
536 struct s3c24xx_uart_port *ourport = to_ourport(port);
537 struct s3c24xx_uart_dma *dma = ourport->dma;
538 struct tty_port *t = &port->state->port;
539 struct dma_tx_state state;
540 enum dma_status dma_status;
541 unsigned int received;
542
543 if (ourport->rx_enabled) {
544 dev_dbg(port->dev, "stopping rx\n");
545 switch (ourport->info->type) {
546 case TYPE_S3C6400:
547 s3c24xx_set_bit(port, S3C64XX_UINTM_RXD,
548 S3C64XX_UINTM);
549 break;
550 case TYPE_APPLE_S5L:
551 s3c24xx_clear_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON);
552 s3c24xx_clear_bit(port, APPLE_S5L_UCON_RXTO_ENA, S3C2410_UCON);
553 break;
554 default:
555 disable_irq_nosync(ourport->rx_irq);
556 break;
557 }
558 ourport->rx_enabled = 0;
559 }
560 if (dma && dma->rx_chan) {
561 dmaengine_pause(dma->tx_chan);
562 dma_status = dmaengine_tx_status(dma->rx_chan,
563 dma->rx_cookie, &state);
564 if (dma_status == DMA_IN_PROGRESS ||
565 dma_status == DMA_PAUSED) {
566 received = dma->rx_bytes_requested - state.residue;
567 dmaengine_terminate_all(dma->rx_chan);
568 s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
569 }
570 }
571}
572
573static inline struct s3c24xx_uart_info
574 *s3c24xx_port_to_info(struct uart_port *port)
575{
576 return to_ourport(port)->info;
577}
578
579static inline struct s3c2410_uartcfg
580 *s3c24xx_port_to_cfg(struct uart_port *port)
581{
582 struct s3c24xx_uart_port *ourport;
583
584 if (port->dev == NULL)
585 return NULL;
586
587 ourport = container_of(port, struct s3c24xx_uart_port, port);
588 return ourport->cfg;
589}
590
591static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
592 unsigned long ufstat)
593{
594 struct s3c24xx_uart_info *info = ourport->info;
595
596 if (ufstat & info->rx_fifofull)
597 return ourport->port.fifosize;
598
599 return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
600}
601
602static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport);
603static void s3c24xx_serial_rx_dma_complete(void *args)
604{
605 struct s3c24xx_uart_port *ourport = args;
606 struct uart_port *port = &ourport->port;
607
608 struct s3c24xx_uart_dma *dma = ourport->dma;
609 struct tty_port *t = &port->state->port;
610 struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
611
612 struct dma_tx_state state;
613 unsigned long flags;
614 int received;
615
616 dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state);
617 received = dma->rx_bytes_requested - state.residue;
618 async_tx_ack(dma->rx_desc);
619
620 spin_lock_irqsave(&port->lock, flags);
621
622 if (received)
623 s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
624
625 if (tty) {
626 tty_flip_buffer_push(t);
627 tty_kref_put(tty);
628 }
629
630 s3c64xx_start_rx_dma(ourport);
631
632 spin_unlock_irqrestore(&port->lock, flags);
633}
634
635static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport)
636{
637 struct s3c24xx_uart_dma *dma = ourport->dma;
638
639 dma_sync_single_for_device(ourport->port.dev, dma->rx_addr,
640 dma->rx_size, DMA_FROM_DEVICE);
641
642 dma->rx_desc = dmaengine_prep_slave_single(dma->rx_chan,
643 dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM,
644 DMA_PREP_INTERRUPT);
645 if (!dma->rx_desc) {
646 dev_err(ourport->port.dev, "Unable to get desc for Rx\n");
647 return;
648 }
649
650 dma->rx_desc->callback = s3c24xx_serial_rx_dma_complete;
651 dma->rx_desc->callback_param = ourport;
652 dma->rx_bytes_requested = dma->rx_size;
653
654 dma->rx_cookie = dmaengine_submit(dma->rx_desc);
655 dma_async_issue_pending(dma->rx_chan);
656}
657
658/* ? - where has parity gone?? */
659#define S3C2410_UERSTAT_PARITY (0x1000)
660
661static void enable_rx_dma(struct s3c24xx_uart_port *ourport)
662{
663 struct uart_port *port = &ourport->port;
664 unsigned int ucon;
665
666 /* set Rx mode to DMA mode */
667 ucon = rd_regl(port, S3C2410_UCON);
668 ucon &= ~(S3C64XX_UCON_RXBURST_MASK |
669 S3C64XX_UCON_TIMEOUT_MASK |
670 S3C64XX_UCON_EMPTYINT_EN |
671 S3C64XX_UCON_DMASUS_EN |
672 S3C64XX_UCON_TIMEOUT_EN |
673 S3C64XX_UCON_RXMODE_MASK);
674 ucon |= S3C64XX_UCON_RXBURST_16 |
675 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
676 S3C64XX_UCON_EMPTYINT_EN |
677 S3C64XX_UCON_TIMEOUT_EN |
678 S3C64XX_UCON_RXMODE_DMA;
679 wr_regl(port, S3C2410_UCON, ucon);
680
681 ourport->rx_mode = S3C24XX_RX_DMA;
682}
683
684static void enable_rx_pio(struct s3c24xx_uart_port *ourport)
685{
686 struct uart_port *port = &ourport->port;
687 unsigned int ucon;
688
689 /* set Rx mode to DMA mode */
690 ucon = rd_regl(port, S3C2410_UCON);
691 ucon &= ~S3C64XX_UCON_RXMODE_MASK;
692 ucon |= S3C64XX_UCON_RXMODE_CPU;
693
694 /* Apple types use these bits for IRQ masks */
695 if (ourport->info->type != TYPE_APPLE_S5L) {
696 ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK |
697 S3C64XX_UCON_EMPTYINT_EN |
698 S3C64XX_UCON_DMASUS_EN |
699 S3C64XX_UCON_TIMEOUT_EN);
700 ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
701 S3C64XX_UCON_TIMEOUT_EN;
702 }
703 wr_regl(port, S3C2410_UCON, ucon);
704
705 ourport->rx_mode = S3C24XX_RX_PIO;
706}
707
708static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport);
709
710static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id)
711{
712 unsigned int utrstat, received;
713 struct s3c24xx_uart_port *ourport = dev_id;
714 struct uart_port *port = &ourport->port;
715 struct s3c24xx_uart_dma *dma = ourport->dma;
716 struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
717 struct tty_port *t = &port->state->port;
718 struct dma_tx_state state;
719
720 utrstat = rd_regl(port, S3C2410_UTRSTAT);
721 rd_regl(port, S3C2410_UFSTAT);
722
723 spin_lock(&port->lock);
724
725 if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) {
726 s3c64xx_start_rx_dma(ourport);
727 if (ourport->rx_mode == S3C24XX_RX_PIO)
728 enable_rx_dma(ourport);
729 goto finish;
730 }
731
732 if (ourport->rx_mode == S3C24XX_RX_DMA) {
733 dmaengine_pause(dma->rx_chan);
734 dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state);
735 dmaengine_terminate_all(dma->rx_chan);
736 received = dma->rx_bytes_requested - state.residue;
737 s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
738
739 enable_rx_pio(ourport);
740 }
741
742 s3c24xx_serial_rx_drain_fifo(ourport);
743
744 if (tty) {
745 tty_flip_buffer_push(t);
746 tty_kref_put(tty);
747 }
748
749 wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT);
750
751finish:
752 spin_unlock(&port->lock);
753
754 return IRQ_HANDLED;
755}
756
757static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
758{
759 struct uart_port *port = &ourport->port;
760 unsigned int ufcon, ch, flag, ufstat, uerstat;
761 unsigned int fifocnt = 0;
762 int max_count = port->fifosize;
763
764 while (max_count-- > 0) {
765 /*
766 * Receive all characters known to be in FIFO
767 * before reading FIFO level again
768 */
769 if (fifocnt == 0) {
770 ufstat = rd_regl(port, S3C2410_UFSTAT);
771 fifocnt = s3c24xx_serial_rx_fifocnt(ourport, ufstat);
772 if (fifocnt == 0)
773 break;
774 }
775 fifocnt--;
776
777 uerstat = rd_regl(port, S3C2410_UERSTAT);
778 ch = rd_reg(port, S3C2410_URXH);
779
780 if (port->flags & UPF_CONS_FLOW) {
781 int txe = s3c24xx_serial_txempty_nofifo(port);
782
783 if (ourport->rx_enabled) {
784 if (!txe) {
785 ourport->rx_enabled = 0;
786 continue;
787 }
788 } else {
789 if (txe) {
790 ufcon = rd_regl(port, S3C2410_UFCON);
791 ufcon |= S3C2410_UFCON_RESETRX;
792 wr_regl(port, S3C2410_UFCON, ufcon);
793 ourport->rx_enabled = 1;
794 return;
795 }
796 continue;
797 }
798 }
799
800 /* insert the character into the buffer */
801
802 flag = TTY_NORMAL;
803 port->icount.rx++;
804
805 if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
806 dev_dbg(port->dev,
807 "rxerr: port ch=0x%02x, rxs=0x%08x\n",
808 ch, uerstat);
809
810 /* check for break */
811 if (uerstat & S3C2410_UERSTAT_BREAK) {
812 dev_dbg(port->dev, "break!\n");
813 port->icount.brk++;
814 if (uart_handle_break(port))
815 continue; /* Ignore character */
816 }
817
818 if (uerstat & S3C2410_UERSTAT_FRAME)
819 port->icount.frame++;
820 if (uerstat & S3C2410_UERSTAT_OVERRUN)
821 port->icount.overrun++;
822
823 uerstat &= port->read_status_mask;
824
825 if (uerstat & S3C2410_UERSTAT_BREAK)
826 flag = TTY_BREAK;
827 else if (uerstat & S3C2410_UERSTAT_PARITY)
828 flag = TTY_PARITY;
829 else if (uerstat & (S3C2410_UERSTAT_FRAME |
830 S3C2410_UERSTAT_OVERRUN))
831 flag = TTY_FRAME;
832 }
833
834 if (uart_handle_sysrq_char(port, ch))
835 continue; /* Ignore character */
836
837 uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN,
838 ch, flag);
839 }
840
841 tty_flip_buffer_push(&port->state->port);
842}
843
844static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id)
845{
846 struct s3c24xx_uart_port *ourport = dev_id;
847 struct uart_port *port = &ourport->port;
848
849 spin_lock(&port->lock);
850 s3c24xx_serial_rx_drain_fifo(ourport);
851 spin_unlock(&port->lock);
852
853 return IRQ_HANDLED;
854}
855
856static irqreturn_t s3c24xx_serial_rx_irq(int irq, void *dev_id)
857{
858 struct s3c24xx_uart_port *ourport = dev_id;
859
860 if (ourport->dma && ourport->dma->rx_chan)
861 return s3c24xx_serial_rx_chars_dma(dev_id);
862 return s3c24xx_serial_rx_chars_pio(dev_id);
863}
864
865static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport)
866{
867 struct uart_port *port = &ourport->port;
868 struct circ_buf *xmit = &port->state->xmit;
869 int count, dma_count = 0;
870
871 count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
872
873 if (ourport->dma && ourport->dma->tx_chan &&
874 count >= ourport->min_dma_size) {
875 int align = dma_get_cache_alignment() -
876 (xmit->tail & (dma_get_cache_alignment() - 1));
877 if (count - align >= ourport->min_dma_size) {
878 dma_count = count - align;
879 count = align;
880 }
881 }
882
883 if (port->x_char) {
884 wr_reg(port, S3C2410_UTXH, port->x_char);
885 port->icount.tx++;
886 port->x_char = 0;
887 return;
888 }
889
890 /* if there isn't anything more to transmit, or the uart is now
891 * stopped, disable the uart and exit
892 */
893
894 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
895 s3c24xx_serial_stop_tx(port);
896 return;
897 }
898
899 /* try and drain the buffer... */
900
901 if (count > port->fifosize) {
902 count = port->fifosize;
903 dma_count = 0;
904 }
905
906 while (!uart_circ_empty(xmit) && count > 0) {
907 if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
908 break;
909
910 wr_reg(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
911 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
912 port->icount.tx++;
913 count--;
914 }
915
916 if (!count && dma_count) {
917 s3c24xx_serial_start_tx_dma(ourport, dma_count);
918 return;
919 }
920
921 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
922 spin_unlock(&port->lock);
923 uart_write_wakeup(port);
924 spin_lock(&port->lock);
925 }
926
927 if (uart_circ_empty(xmit))
928 s3c24xx_serial_stop_tx(port);
929}
930
931static irqreturn_t s3c24xx_serial_tx_irq(int irq, void *id)
932{
933 struct s3c24xx_uart_port *ourport = id;
934 struct uart_port *port = &ourport->port;
935
936 spin_lock(&port->lock);
937
938 s3c24xx_serial_tx_chars(ourport);
939
940 spin_unlock(&port->lock);
941 return IRQ_HANDLED;
942}
943
944/* interrupt handler for s3c64xx and later SoC's.*/
945static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
946{
947 struct s3c24xx_uart_port *ourport = id;
948 struct uart_port *port = &ourport->port;
949 unsigned int pend = rd_regl(port, S3C64XX_UINTP);
950 irqreturn_t ret = IRQ_HANDLED;
951
952 if (pend & S3C64XX_UINTM_RXD_MSK) {
953 ret = s3c24xx_serial_rx_irq(irq, id);
954 wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK);
955 }
956 if (pend & S3C64XX_UINTM_TXD_MSK) {
957 ret = s3c24xx_serial_tx_irq(irq, id);
958 wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK);
959 }
960 return ret;
961}
962
963/* interrupt handler for Apple SoC's.*/
964static irqreturn_t apple_serial_handle_irq(int irq, void *id)
965{
966 struct s3c24xx_uart_port *ourport = id;
967 struct uart_port *port = &ourport->port;
968 unsigned int pend = rd_regl(port, S3C2410_UTRSTAT);
969 irqreturn_t ret = IRQ_NONE;
970
971 if (pend & (APPLE_S5L_UTRSTAT_RXTHRESH | APPLE_S5L_UTRSTAT_RXTO)) {
972 wr_regl(port, S3C2410_UTRSTAT,
973 APPLE_S5L_UTRSTAT_RXTHRESH | APPLE_S5L_UTRSTAT_RXTO);
974 ret = s3c24xx_serial_rx_irq(irq, id);
975 }
976 if (pend & APPLE_S5L_UTRSTAT_TXTHRESH) {
977 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_TXTHRESH);
978 ret = s3c24xx_serial_tx_irq(irq, id);
979 }
980
981 return ret;
982}
983
984static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
985{
986 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
987 unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
988 unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
989
990 if (ufcon & S3C2410_UFCON_FIFOMODE) {
991 if ((ufstat & info->tx_fifomask) != 0 ||
992 (ufstat & info->tx_fifofull))
993 return 0;
994
995 return 1;
996 }
997
998 return s3c24xx_serial_txempty_nofifo(port);
999}
1000
1001/* no modem control lines */
1002static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
1003{
1004 unsigned int umstat = rd_reg(port, S3C2410_UMSTAT);
1005
1006 if (umstat & S3C2410_UMSTAT_CTS)
1007 return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
1008 else
1009 return TIOCM_CAR | TIOCM_DSR;
1010}
1011
1012static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
1013{
1014 unsigned int umcon = rd_regl(port, S3C2410_UMCON);
1015
1016 if (mctrl & TIOCM_RTS)
1017 umcon |= S3C2410_UMCOM_RTS_LOW;
1018 else
1019 umcon &= ~S3C2410_UMCOM_RTS_LOW;
1020
1021 wr_regl(port, S3C2410_UMCON, umcon);
1022}
1023
1024static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
1025{
1026 unsigned long flags;
1027 unsigned int ucon;
1028
1029 spin_lock_irqsave(&port->lock, flags);
1030
1031 ucon = rd_regl(port, S3C2410_UCON);
1032
1033 if (break_state)
1034 ucon |= S3C2410_UCON_SBREAK;
1035 else
1036 ucon &= ~S3C2410_UCON_SBREAK;
1037
1038 wr_regl(port, S3C2410_UCON, ucon);
1039
1040 spin_unlock_irqrestore(&port->lock, flags);
1041}
1042
1043static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
1044{
1045 struct s3c24xx_uart_dma *dma = p->dma;
1046 struct dma_slave_caps dma_caps;
1047 const char *reason = NULL;
1048 int ret;
1049
1050 /* Default slave configuration parameters */
1051 dma->rx_conf.direction = DMA_DEV_TO_MEM;
1052 dma->rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
1053 dma->rx_conf.src_addr = p->port.mapbase + S3C2410_URXH;
1054 dma->rx_conf.src_maxburst = 1;
1055
1056 dma->tx_conf.direction = DMA_MEM_TO_DEV;
1057 dma->tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
1058 dma->tx_conf.dst_addr = p->port.mapbase + S3C2410_UTXH;
1059 dma->tx_conf.dst_maxburst = 1;
1060
1061 dma->rx_chan = dma_request_chan(p->port.dev, "rx");
1062
1063 if (IS_ERR(dma->rx_chan)) {
1064 reason = "DMA RX channel request failed";
1065 ret = PTR_ERR(dma->rx_chan);
1066 goto err_warn;
1067 }
1068
1069 ret = dma_get_slave_caps(dma->rx_chan, &dma_caps);
1070 if (ret < 0 ||
1071 dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) {
1072 reason = "insufficient DMA RX engine capabilities";
1073 ret = -EOPNOTSUPP;
1074 goto err_release_rx;
1075 }
1076
1077 dmaengine_slave_config(dma->rx_chan, &dma->rx_conf);
1078
1079 dma->tx_chan = dma_request_chan(p->port.dev, "tx");
1080 if (IS_ERR(dma->tx_chan)) {
1081 reason = "DMA TX channel request failed";
1082 ret = PTR_ERR(dma->tx_chan);
1083 goto err_release_rx;
1084 }
1085
1086 ret = dma_get_slave_caps(dma->tx_chan, &dma_caps);
1087 if (ret < 0 ||
1088 dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) {
1089 reason = "insufficient DMA TX engine capabilities";
1090 ret = -EOPNOTSUPP;
1091 goto err_release_tx;
1092 }
1093
1094 dmaengine_slave_config(dma->tx_chan, &dma->tx_conf);
1095
1096 /* RX buffer */
1097 dma->rx_size = PAGE_SIZE;
1098
1099 dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL);
1100 if (!dma->rx_buf) {
1101 ret = -ENOMEM;
1102 goto err_release_tx;
1103 }
1104
1105 dma->rx_addr = dma_map_single(p->port.dev, dma->rx_buf,
1106 dma->rx_size, DMA_FROM_DEVICE);
1107 if (dma_mapping_error(p->port.dev, dma->rx_addr)) {
1108 reason = "DMA mapping error for RX buffer";
1109 ret = -EIO;
1110 goto err_free_rx;
1111 }
1112
1113 /* TX buffer */
1114 dma->tx_addr = dma_map_single(p->port.dev, p->port.state->xmit.buf,
1115 UART_XMIT_SIZE, DMA_TO_DEVICE);
1116 if (dma_mapping_error(p->port.dev, dma->tx_addr)) {
1117 reason = "DMA mapping error for TX buffer";
1118 ret = -EIO;
1119 goto err_unmap_rx;
1120 }
1121
1122 return 0;
1123
1124err_unmap_rx:
1125 dma_unmap_single(p->port.dev, dma->rx_addr, dma->rx_size,
1126 DMA_FROM_DEVICE);
1127err_free_rx:
1128 kfree(dma->rx_buf);
1129err_release_tx:
1130 dma_release_channel(dma->tx_chan);
1131err_release_rx:
1132 dma_release_channel(dma->rx_chan);
1133err_warn:
1134 if (reason)
1135 dev_warn(p->port.dev, "%s, DMA will not be used\n", reason);
1136 return ret;
1137}
1138
1139static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
1140{
1141 struct s3c24xx_uart_dma *dma = p->dma;
1142
1143 if (dma->rx_chan) {
1144 dmaengine_terminate_all(dma->rx_chan);
1145 dma_unmap_single(p->port.dev, dma->rx_addr,
1146 dma->rx_size, DMA_FROM_DEVICE);
1147 kfree(dma->rx_buf);
1148 dma_release_channel(dma->rx_chan);
1149 dma->rx_chan = NULL;
1150 }
1151
1152 if (dma->tx_chan) {
1153 dmaengine_terminate_all(dma->tx_chan);
1154 dma_unmap_single(p->port.dev, dma->tx_addr,
1155 UART_XMIT_SIZE, DMA_TO_DEVICE);
1156 dma_release_channel(dma->tx_chan);
1157 dma->tx_chan = NULL;
1158 }
1159}
1160
1161static void s3c24xx_serial_shutdown(struct uart_port *port)
1162{
1163 struct s3c24xx_uart_port *ourport = to_ourport(port);
1164
1165 if (ourport->tx_claimed) {
1166 free_irq(ourport->tx_irq, ourport);
1167 ourport->tx_enabled = 0;
1168 ourport->tx_claimed = 0;
1169 ourport->tx_mode = 0;
1170 }
1171
1172 if (ourport->rx_claimed) {
1173 free_irq(ourport->rx_irq, ourport);
1174 ourport->rx_claimed = 0;
1175 ourport->rx_enabled = 0;
1176 }
1177
1178 if (ourport->dma)
1179 s3c24xx_serial_release_dma(ourport);
1180
1181 ourport->tx_in_progress = 0;
1182}
1183
1184static void s3c64xx_serial_shutdown(struct uart_port *port)
1185{
1186 struct s3c24xx_uart_port *ourport = to_ourport(port);
1187
1188 ourport->tx_enabled = 0;
1189 ourport->tx_mode = 0;
1190 ourport->rx_enabled = 0;
1191
1192 free_irq(port->irq, ourport);
1193
1194 wr_regl(port, S3C64XX_UINTP, 0xf);
1195 wr_regl(port, S3C64XX_UINTM, 0xf);
1196
1197 if (ourport->dma)
1198 s3c24xx_serial_release_dma(ourport);
1199
1200 ourport->tx_in_progress = 0;
1201}
1202
1203static void apple_s5l_serial_shutdown(struct uart_port *port)
1204{
1205 struct s3c24xx_uart_port *ourport = to_ourport(port);
1206
1207 unsigned int ucon;
1208
1209 ucon = rd_regl(port, S3C2410_UCON);
1210 ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK |
1211 APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
1212 APPLE_S5L_UCON_RXTO_ENA_MSK);
1213 wr_regl(port, S3C2410_UCON, ucon);
1214
1215 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS);
1216
1217 free_irq(port->irq, ourport);
1218
1219 ourport->tx_enabled = 0;
1220 ourport->tx_mode = 0;
1221 ourport->rx_enabled = 0;
1222
1223 if (ourport->dma)
1224 s3c24xx_serial_release_dma(ourport);
1225
1226 ourport->tx_in_progress = 0;
1227}
1228
1229static int s3c24xx_serial_startup(struct uart_port *port)
1230{
1231 struct s3c24xx_uart_port *ourport = to_ourport(port);
1232 int ret;
1233
1234 ourport->rx_enabled = 1;
1235
1236 ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_irq, 0,
1237 s3c24xx_serial_portname(port), ourport);
1238
1239 if (ret != 0) {
1240 dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq);
1241 return ret;
1242 }
1243
1244 ourport->rx_claimed = 1;
1245
1246 dev_dbg(port->dev, "requesting tx irq...\n");
1247
1248 ourport->tx_enabled = 1;
1249
1250 ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_irq, 0,
1251 s3c24xx_serial_portname(port), ourport);
1252
1253 if (ret) {
1254 dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq);
1255 goto err;
1256 }
1257
1258 ourport->tx_claimed = 1;
1259
1260 /* the port reset code should have done the correct
1261 * register setup for the port controls
1262 */
1263
1264 return ret;
1265
1266err:
1267 s3c24xx_serial_shutdown(port);
1268 return ret;
1269}
1270
1271static int s3c64xx_serial_startup(struct uart_port *port)
1272{
1273 struct s3c24xx_uart_port *ourport = to_ourport(port);
1274 unsigned long flags;
1275 unsigned int ufcon;
1276 int ret;
1277
1278 wr_regl(port, S3C64XX_UINTM, 0xf);
1279 if (ourport->dma) {
1280 ret = s3c24xx_serial_request_dma(ourport);
1281 if (ret < 0) {
1282 devm_kfree(port->dev, ourport->dma);
1283 ourport->dma = NULL;
1284 }
1285 }
1286
1287 ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED,
1288 s3c24xx_serial_portname(port), ourport);
1289 if (ret) {
1290 dev_err(port->dev, "cannot get irq %d\n", port->irq);
1291 return ret;
1292 }
1293
1294 /* For compatibility with s3c24xx Soc's */
1295 ourport->rx_enabled = 1;
1296 ourport->tx_enabled = 0;
1297
1298 spin_lock_irqsave(&port->lock, flags);
1299
1300 ufcon = rd_regl(port, S3C2410_UFCON);
1301 ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8;
1302 if (!uart_console(port))
1303 ufcon |= S3C2410_UFCON_RESETTX;
1304 wr_regl(port, S3C2410_UFCON, ufcon);
1305
1306 enable_rx_pio(ourport);
1307
1308 spin_unlock_irqrestore(&port->lock, flags);
1309
1310 /* Enable Rx Interrupt */
1311 s3c24xx_clear_bit(port, S3C64XX_UINTM_RXD, S3C64XX_UINTM);
1312
1313 return ret;
1314}
1315
1316static int apple_s5l_serial_startup(struct uart_port *port)
1317{
1318 struct s3c24xx_uart_port *ourport = to_ourport(port);
1319 unsigned long flags;
1320 unsigned int ufcon;
1321 int ret;
1322
1323 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS);
1324
1325 ret = request_irq(port->irq, apple_serial_handle_irq, 0,
1326 s3c24xx_serial_portname(port), ourport);
1327 if (ret) {
1328 dev_err(port->dev, "cannot get irq %d\n", port->irq);
1329 return ret;
1330 }
1331
1332 /* For compatibility with s3c24xx Soc's */
1333 ourport->rx_enabled = 1;
1334 ourport->tx_enabled = 0;
1335
1336 spin_lock_irqsave(&port->lock, flags);
1337
1338 ufcon = rd_regl(port, S3C2410_UFCON);
1339 ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8;
1340 if (!uart_console(port))
1341 ufcon |= S3C2410_UFCON_RESETTX;
1342 wr_regl(port, S3C2410_UFCON, ufcon);
1343
1344 enable_rx_pio(ourport);
1345
1346 spin_unlock_irqrestore(&port->lock, flags);
1347
1348 /* Enable Rx Interrupt */
1349 s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON);
1350 s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTO_ENA, S3C2410_UCON);
1351
1352 return ret;
1353}
1354
1355/* power power management control */
1356
1357static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
1358 unsigned int old)
1359{
1360 struct s3c24xx_uart_port *ourport = to_ourport(port);
1361 int timeout = 10000;
1362
1363 ourport->pm_level = level;
1364
1365 switch (level) {
1366 case 3:
1367 while (--timeout && !s3c24xx_serial_txempty_nofifo(port))
1368 udelay(100);
1369
1370 if (!IS_ERR(ourport->baudclk))
1371 clk_disable_unprepare(ourport->baudclk);
1372
1373 clk_disable_unprepare(ourport->clk);
1374 break;
1375
1376 case 0:
1377 clk_prepare_enable(ourport->clk);
1378
1379 if (!IS_ERR(ourport->baudclk))
1380 clk_prepare_enable(ourport->baudclk);
1381
1382 break;
1383 default:
1384 dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level);
1385 }
1386}
1387
1388/* baud rate calculation
1389 *
1390 * The UARTs on the S3C2410/S3C2440 can take their clocks from a number
1391 * of different sources, including the peripheral clock ("pclk") and an
1392 * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk")
1393 * with a programmable extra divisor.
1394 *
1395 * The following code goes through the clock sources, and calculates the
1396 * baud clocks (and the resultant actual baud rates) and then tries to
1397 * pick the closest one and select that.
1398 *
1399 */
1400
1401#define MAX_CLK_NAME_LENGTH 15
1402
1403static inline int s3c24xx_serial_getsource(struct uart_port *port)
1404{
1405 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1406 unsigned int ucon;
1407
1408 if (info->num_clks == 1)
1409 return 0;
1410
1411 ucon = rd_regl(port, S3C2410_UCON);
1412 ucon &= info->clksel_mask;
1413 return ucon >> info->clksel_shift;
1414}
1415
1416static void s3c24xx_serial_setsource(struct uart_port *port,
1417 unsigned int clk_sel)
1418{
1419 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1420 unsigned int ucon;
1421
1422 if (info->num_clks == 1)
1423 return;
1424
1425 ucon = rd_regl(port, S3C2410_UCON);
1426 if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel)
1427 return;
1428
1429 ucon &= ~info->clksel_mask;
1430 ucon |= clk_sel << info->clksel_shift;
1431 wr_regl(port, S3C2410_UCON, ucon);
1432}
1433
1434static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
1435 unsigned int req_baud, struct clk **best_clk,
1436 unsigned int *clk_num)
1437{
1438 struct s3c24xx_uart_info *info = ourport->info;
1439 struct clk *clk;
1440 unsigned long rate;
1441 unsigned int cnt, baud, quot, best_quot = 0;
1442 char clkname[MAX_CLK_NAME_LENGTH];
1443 int calc_deviation, deviation = (1 << 30) - 1;
1444
1445 for (cnt = 0; cnt < info->num_clks; cnt++) {
1446 /* Keep selected clock if provided */
1447 if (ourport->cfg->clk_sel &&
1448 !(ourport->cfg->clk_sel & (1 << cnt)))
1449 continue;
1450
1451 sprintf(clkname, "clk_uart_baud%d", cnt);
1452 clk = clk_get(ourport->port.dev, clkname);
1453 if (IS_ERR(clk))
1454 continue;
1455
1456 rate = clk_get_rate(clk);
1457 if (!rate)
1458 continue;
1459
1460 if (ourport->info->has_divslot) {
1461 unsigned long div = rate / req_baud;
1462
1463 /* The UDIVSLOT register on the newer UARTs allows us to
1464 * get a divisor adjustment of 1/16th on the baud clock.
1465 *
1466 * We don't keep the UDIVSLOT value (the 16ths we
1467 * calculated by not multiplying the baud by 16) as it
1468 * is easy enough to recalculate.
1469 */
1470
1471 quot = div / 16;
1472 baud = rate / div;
1473 } else {
1474 quot = (rate + (8 * req_baud)) / (16 * req_baud);
1475 baud = rate / (quot * 16);
1476 }
1477 quot--;
1478
1479 calc_deviation = req_baud - baud;
1480 if (calc_deviation < 0)
1481 calc_deviation = -calc_deviation;
1482
1483 if (calc_deviation < deviation) {
1484 *best_clk = clk;
1485 best_quot = quot;
1486 *clk_num = cnt;
1487 deviation = calc_deviation;
1488 }
1489 }
1490
1491 return best_quot;
1492}
1493
1494/* udivslot_table[]
1495 *
1496 * This table takes the fractional value of the baud divisor and gives
1497 * the recommended setting for the UDIVSLOT register.
1498 */
1499static u16 udivslot_table[16] = {
1500 [0] = 0x0000,
1501 [1] = 0x0080,
1502 [2] = 0x0808,
1503 [3] = 0x0888,
1504 [4] = 0x2222,
1505 [5] = 0x4924,
1506 [6] = 0x4A52,
1507 [7] = 0x54AA,
1508 [8] = 0x5555,
1509 [9] = 0xD555,
1510 [10] = 0xD5D5,
1511 [11] = 0xDDD5,
1512 [12] = 0xDDDD,
1513 [13] = 0xDFDD,
1514 [14] = 0xDFDF,
1515 [15] = 0xFFDF,
1516};
1517
1518static void s3c24xx_serial_set_termios(struct uart_port *port,
1519 struct ktermios *termios,
1520 struct ktermios *old)
1521{
1522 struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
1523 struct s3c24xx_uart_port *ourport = to_ourport(port);
1524 struct clk *clk = ERR_PTR(-EINVAL);
1525 unsigned long flags;
1526 unsigned int baud, quot, clk_sel = 0;
1527 unsigned int ulcon;
1528 unsigned int umcon;
1529 unsigned int udivslot = 0;
1530
1531 /*
1532 * We don't support modem control lines.
1533 */
1534 termios->c_cflag &= ~(HUPCL | CMSPAR);
1535 termios->c_cflag |= CLOCAL;
1536
1537 /*
1538 * Ask the core to calculate the divisor for us.
1539 */
1540
1541 baud = uart_get_baud_rate(port, termios, old, 0, 3000000);
1542 quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
1543 if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
1544 quot = port->custom_divisor;
1545 if (IS_ERR(clk))
1546 return;
1547
1548 /* check to see if we need to change clock source */
1549
1550 if (ourport->baudclk != clk) {
1551 clk_prepare_enable(clk);
1552
1553 s3c24xx_serial_setsource(port, clk_sel);
1554
1555 if (!IS_ERR(ourport->baudclk)) {
1556 clk_disable_unprepare(ourport->baudclk);
1557 ourport->baudclk = ERR_PTR(-EINVAL);
1558 }
1559
1560 ourport->baudclk = clk;
1561 ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
1562 }
1563
1564 if (ourport->info->has_divslot) {
1565 unsigned int div = ourport->baudclk_rate / baud;
1566
1567 if (cfg->has_fracval) {
1568 udivslot = (div & 15);
1569 dev_dbg(port->dev, "fracval = %04x\n", udivslot);
1570 } else {
1571 udivslot = udivslot_table[div & 15];
1572 dev_dbg(port->dev, "udivslot = %04x (div %d)\n",
1573 udivslot, div & 15);
1574 }
1575 }
1576
1577 switch (termios->c_cflag & CSIZE) {
1578 case CS5:
1579 dev_dbg(port->dev, "config: 5bits/char\n");
1580 ulcon = S3C2410_LCON_CS5;
1581 break;
1582 case CS6:
1583 dev_dbg(port->dev, "config: 6bits/char\n");
1584 ulcon = S3C2410_LCON_CS6;
1585 break;
1586 case CS7:
1587 dev_dbg(port->dev, "config: 7bits/char\n");
1588 ulcon = S3C2410_LCON_CS7;
1589 break;
1590 case CS8:
1591 default:
1592 dev_dbg(port->dev, "config: 8bits/char\n");
1593 ulcon = S3C2410_LCON_CS8;
1594 break;
1595 }
1596
1597 /* preserve original lcon IR settings */
1598 ulcon |= (cfg->ulcon & S3C2410_LCON_IRM);
1599
1600 if (termios->c_cflag & CSTOPB)
1601 ulcon |= S3C2410_LCON_STOPB;
1602
1603 if (termios->c_cflag & PARENB) {
1604 if (termios->c_cflag & PARODD)
1605 ulcon |= S3C2410_LCON_PODD;
1606 else
1607 ulcon |= S3C2410_LCON_PEVEN;
1608 } else {
1609 ulcon |= S3C2410_LCON_PNONE;
1610 }
1611
1612 spin_lock_irqsave(&port->lock, flags);
1613
1614 dev_dbg(port->dev,
1615 "setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
1616 ulcon, quot, udivslot);
1617
1618 wr_regl(port, S3C2410_ULCON, ulcon);
1619 wr_regl(port, S3C2410_UBRDIV, quot);
1620
1621 port->status &= ~UPSTAT_AUTOCTS;
1622
1623 umcon = rd_regl(port, S3C2410_UMCON);
1624 if (termios->c_cflag & CRTSCTS) {
1625 umcon |= S3C2410_UMCOM_AFC;
1626 /* Disable RTS when RX FIFO contains 63 bytes */
1627 umcon &= ~S3C2412_UMCON_AFC_8;
1628 port->status = UPSTAT_AUTOCTS;
1629 } else {
1630 umcon &= ~S3C2410_UMCOM_AFC;
1631 }
1632 wr_regl(port, S3C2410_UMCON, umcon);
1633
1634 if (ourport->info->has_divslot)
1635 wr_regl(port, S3C2443_DIVSLOT, udivslot);
1636
1637 dev_dbg(port->dev,
1638 "uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
1639 rd_regl(port, S3C2410_ULCON),
1640 rd_regl(port, S3C2410_UCON),
1641 rd_regl(port, S3C2410_UFCON));
1642
1643 /*
1644 * Update the per-port timeout.
1645 */
1646 uart_update_timeout(port, termios->c_cflag, baud);
1647
1648 /*
1649 * Which character status flags are we interested in?
1650 */
1651 port->read_status_mask = S3C2410_UERSTAT_OVERRUN;
1652 if (termios->c_iflag & INPCK)
1653 port->read_status_mask |= S3C2410_UERSTAT_FRAME |
1654 S3C2410_UERSTAT_PARITY;
1655 /*
1656 * Which character status flags should we ignore?
1657 */
1658 port->ignore_status_mask = 0;
1659 if (termios->c_iflag & IGNPAR)
1660 port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN;
1661 if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
1662 port->ignore_status_mask |= S3C2410_UERSTAT_FRAME;
1663
1664 /*
1665 * Ignore all characters if CREAD is not set.
1666 */
1667 if ((termios->c_cflag & CREAD) == 0)
1668 port->ignore_status_mask |= RXSTAT_DUMMY_READ;
1669
1670 spin_unlock_irqrestore(&port->lock, flags);
1671}
1672
1673static const char *s3c24xx_serial_type(struct uart_port *port)
1674{
1675 struct s3c24xx_uart_port *ourport = to_ourport(port);
1676
1677 switch (ourport->info->type) {
1678 case TYPE_S3C24XX:
1679 return "S3C24XX";
1680 case TYPE_S3C6400:
1681 return "S3C6400/10";
1682 case TYPE_APPLE_S5L:
1683 return "APPLE S5L";
1684 default:
1685 return NULL;
1686 }
1687}
1688
1689static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
1690{
1691 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1692
1693 if (flags & UART_CONFIG_TYPE)
1694 port->type = info->port_type;
1695}
1696
1697/*
1698 * verify the new serial_struct (for TIOCSSERIAL).
1699 */
1700static int
1701s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
1702{
1703 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1704
1705 if (ser->type != PORT_UNKNOWN && ser->type != info->port_type)
1706 return -EINVAL;
1707
1708 return 0;
1709}
1710
1711#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
1712
1713static struct console s3c24xx_serial_console;
1714
1715static int __init s3c24xx_serial_console_init(void)
1716{
1717 register_console(&s3c24xx_serial_console);
1718 return 0;
1719}
1720console_initcall(s3c24xx_serial_console_init);
1721
1722#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
1723#else
1724#define S3C24XX_SERIAL_CONSOLE NULL
1725#endif
1726
1727#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
1728static int s3c24xx_serial_get_poll_char(struct uart_port *port);
1729static void s3c24xx_serial_put_poll_char(struct uart_port *port,
1730 unsigned char c);
1731#endif
1732
1733static const struct uart_ops s3c24xx_serial_ops = {
1734 .pm = s3c24xx_serial_pm,
1735 .tx_empty = s3c24xx_serial_tx_empty,
1736 .get_mctrl = s3c24xx_serial_get_mctrl,
1737 .set_mctrl = s3c24xx_serial_set_mctrl,
1738 .stop_tx = s3c24xx_serial_stop_tx,
1739 .start_tx = s3c24xx_serial_start_tx,
1740 .stop_rx = s3c24xx_serial_stop_rx,
1741 .break_ctl = s3c24xx_serial_break_ctl,
1742 .startup = s3c24xx_serial_startup,
1743 .shutdown = s3c24xx_serial_shutdown,
1744 .set_termios = s3c24xx_serial_set_termios,
1745 .type = s3c24xx_serial_type,
1746 .config_port = s3c24xx_serial_config_port,
1747 .verify_port = s3c24xx_serial_verify_port,
1748#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
1749 .poll_get_char = s3c24xx_serial_get_poll_char,
1750 .poll_put_char = s3c24xx_serial_put_poll_char,
1751#endif
1752};
1753
1754static const struct uart_ops s3c64xx_serial_ops = {
1755 .pm = s3c24xx_serial_pm,
1756 .tx_empty = s3c24xx_serial_tx_empty,
1757 .get_mctrl = s3c24xx_serial_get_mctrl,
1758 .set_mctrl = s3c24xx_serial_set_mctrl,
1759 .stop_tx = s3c24xx_serial_stop_tx,
1760 .start_tx = s3c24xx_serial_start_tx,
1761 .stop_rx = s3c24xx_serial_stop_rx,
1762 .break_ctl = s3c24xx_serial_break_ctl,
1763 .startup = s3c64xx_serial_startup,
1764 .shutdown = s3c64xx_serial_shutdown,
1765 .set_termios = s3c24xx_serial_set_termios,
1766 .type = s3c24xx_serial_type,
1767 .config_port = s3c24xx_serial_config_port,
1768 .verify_port = s3c24xx_serial_verify_port,
1769#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
1770 .poll_get_char = s3c24xx_serial_get_poll_char,
1771 .poll_put_char = s3c24xx_serial_put_poll_char,
1772#endif
1773};
1774
1775static const struct uart_ops apple_s5l_serial_ops = {
1776 .pm = s3c24xx_serial_pm,
1777 .tx_empty = s3c24xx_serial_tx_empty,
1778 .get_mctrl = s3c24xx_serial_get_mctrl,
1779 .set_mctrl = s3c24xx_serial_set_mctrl,
1780 .stop_tx = s3c24xx_serial_stop_tx,
1781 .start_tx = s3c24xx_serial_start_tx,
1782 .stop_rx = s3c24xx_serial_stop_rx,
1783 .break_ctl = s3c24xx_serial_break_ctl,
1784 .startup = apple_s5l_serial_startup,
1785 .shutdown = apple_s5l_serial_shutdown,
1786 .set_termios = s3c24xx_serial_set_termios,
1787 .type = s3c24xx_serial_type,
1788 .config_port = s3c24xx_serial_config_port,
1789 .verify_port = s3c24xx_serial_verify_port,
1790#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
1791 .poll_get_char = s3c24xx_serial_get_poll_char,
1792 .poll_put_char = s3c24xx_serial_put_poll_char,
1793#endif
1794};
1795
1796static struct uart_driver s3c24xx_uart_drv = {
1797 .owner = THIS_MODULE,
1798 .driver_name = "s3c2410_serial",
1799 .nr = CONFIG_SERIAL_SAMSUNG_UARTS,
1800 .cons = S3C24XX_SERIAL_CONSOLE,
1801 .dev_name = S3C24XX_SERIAL_NAME,
1802 .major = S3C24XX_SERIAL_MAJOR,
1803 .minor = S3C24XX_SERIAL_MINOR,
1804};
1805
1806#define __PORT_LOCK_UNLOCKED(i) \
1807 __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[i].port.lock)
1808static struct s3c24xx_uart_port
1809s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
1810 [0] = {
1811 .port = {
1812 .lock = __PORT_LOCK_UNLOCKED(0),
1813 .iotype = UPIO_MEM,
1814 .uartclk = 0,
1815 .fifosize = 16,
1816 .ops = &s3c24xx_serial_ops,
1817 .flags = UPF_BOOT_AUTOCONF,
1818 .line = 0,
1819 }
1820 },
1821 [1] = {
1822 .port = {
1823 .lock = __PORT_LOCK_UNLOCKED(1),
1824 .iotype = UPIO_MEM,
1825 .uartclk = 0,
1826 .fifosize = 16,
1827 .ops = &s3c24xx_serial_ops,
1828 .flags = UPF_BOOT_AUTOCONF,
1829 .line = 1,
1830 }
1831 },
1832#if CONFIG_SERIAL_SAMSUNG_UARTS > 2
1833 [2] = {
1834 .port = {
1835 .lock = __PORT_LOCK_UNLOCKED(2),
1836 .iotype = UPIO_MEM,
1837 .uartclk = 0,
1838 .fifosize = 16,
1839 .ops = &s3c24xx_serial_ops,
1840 .flags = UPF_BOOT_AUTOCONF,
1841 .line = 2,
1842 }
1843 },
1844#endif
1845#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
1846 [3] = {
1847 .port = {
1848 .lock = __PORT_LOCK_UNLOCKED(3),
1849 .iotype = UPIO_MEM,
1850 .uartclk = 0,
1851 .fifosize = 16,
1852 .ops = &s3c24xx_serial_ops,
1853 .flags = UPF_BOOT_AUTOCONF,
1854 .line = 3,
1855 }
1856 }
1857#endif
1858};
1859#undef __PORT_LOCK_UNLOCKED
1860
1861/* s3c24xx_serial_resetport
1862 *
1863 * reset the fifos and other the settings.
1864 */
1865
1866static void s3c24xx_serial_resetport(struct uart_port *port,
1867 struct s3c2410_uartcfg *cfg)
1868{
1869 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
1870 unsigned long ucon = rd_regl(port, S3C2410_UCON);
1871
1872 ucon &= (info->clksel_mask | info->ucon_mask);
1873 wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
1874
1875 /* reset both fifos */
1876 wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
1877 wr_regl(port, S3C2410_UFCON, cfg->ufcon);
1878
1879 /* some delay is required after fifo reset */
1880 udelay(1);
1881}
1882
1883#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
1884
1885static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
1886 unsigned long val, void *data)
1887{
1888 struct s3c24xx_uart_port *port;
1889 struct uart_port *uport;
1890
1891 port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
1892 uport = &port->port;
1893
1894 /* check to see if port is enabled */
1895
1896 if (port->pm_level != 0)
1897 return 0;
1898
1899 /* try and work out if the baudrate is changing, we can detect
1900 * a change in rate, but we do not have support for detecting
1901 * a disturbance in the clock-rate over the change.
1902 */
1903
1904 if (IS_ERR(port->baudclk))
1905 goto exit;
1906
1907 if (port->baudclk_rate == clk_get_rate(port->baudclk))
1908 goto exit;
1909
1910 if (val == CPUFREQ_PRECHANGE) {
1911 /* we should really shut the port down whilst the
1912 * frequency change is in progress.
1913 */
1914
1915 } else if (val == CPUFREQ_POSTCHANGE) {
1916 struct ktermios *termios;
1917 struct tty_struct *tty;
1918
1919 if (uport->state == NULL)
1920 goto exit;
1921
1922 tty = uport->state->port.tty;
1923
1924 if (tty == NULL)
1925 goto exit;
1926
1927 termios = &tty->termios;
1928
1929 if (termios == NULL) {
1930 dev_warn(uport->dev, "%s: no termios?\n", __func__);
1931 goto exit;
1932 }
1933
1934 s3c24xx_serial_set_termios(uport, termios, NULL);
1935 }
1936
1937exit:
1938 return 0;
1939}
1940
1941static inline int
1942s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
1943{
1944 port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
1945
1946 return cpufreq_register_notifier(&port->freq_transition,
1947 CPUFREQ_TRANSITION_NOTIFIER);
1948}
1949
1950static inline void
1951s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
1952{
1953 cpufreq_unregister_notifier(&port->freq_transition,
1954 CPUFREQ_TRANSITION_NOTIFIER);
1955}
1956
1957#else
1958static inline int
1959s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
1960{
1961 return 0;
1962}
1963
1964static inline void
1965s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
1966{
1967}
1968#endif
1969
1970static int s3c24xx_serial_enable_baudclk(struct s3c24xx_uart_port *ourport)
1971{
1972 struct device *dev = ourport->port.dev;
1973 struct s3c24xx_uart_info *info = ourport->info;
1974 char clk_name[MAX_CLK_NAME_LENGTH];
1975 unsigned int clk_sel;
1976 struct clk *clk;
1977 int clk_num;
1978 int ret;
1979
1980 clk_sel = ourport->cfg->clk_sel ? : info->def_clk_sel;
1981 for (clk_num = 0; clk_num < info->num_clks; clk_num++) {
1982 if (!(clk_sel & (1 << clk_num)))
1983 continue;
1984
1985 sprintf(clk_name, "clk_uart_baud%d", clk_num);
1986 clk = clk_get(dev, clk_name);
1987 if (IS_ERR(clk))
1988 continue;
1989
1990 ret = clk_prepare_enable(clk);
1991 if (ret) {
1992 clk_put(clk);
1993 continue;
1994 }
1995
1996 ourport->baudclk = clk;
1997 ourport->baudclk_rate = clk_get_rate(clk);
1998 s3c24xx_serial_setsource(&ourport->port, clk_num);
1999
2000 return 0;
2001 }
2002
2003 return -EINVAL;
2004}
2005
2006/* s3c24xx_serial_init_port
2007 *
2008 * initialise a single serial port from the platform device given
2009 */
2010
2011static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
2012 struct platform_device *platdev)
2013{
2014 struct uart_port *port = &ourport->port;
2015 struct s3c2410_uartcfg *cfg = ourport->cfg;
2016 struct resource *res;
2017 int ret;
2018
2019 if (platdev == NULL)
2020 return -ENODEV;
2021
2022 if (port->mapbase != 0)
2023 return -EINVAL;
2024
2025 /* setup info for port */
2026 port->dev = &platdev->dev;
2027
2028 port->uartclk = 1;
2029
2030 if (cfg->uart_flags & UPF_CONS_FLOW) {
2031 dev_dbg(port->dev, "enabling flow control\n");
2032 port->flags |= UPF_CONS_FLOW;
2033 }
2034
2035 /* sort our the physical and virtual addresses for each UART */
2036
2037 res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
2038 if (res == NULL) {
2039 dev_err(port->dev, "failed to find memory resource for uart\n");
2040 return -EINVAL;
2041 }
2042
2043 dev_dbg(port->dev, "resource %pR)\n", res);
2044
2045 port->membase = devm_ioremap_resource(port->dev, res);
2046 if (IS_ERR(port->membase)) {
2047 dev_err(port->dev, "failed to remap controller address\n");
2048 return -EBUSY;
2049 }
2050
2051 port->mapbase = res->start;
2052 ret = platform_get_irq(platdev, 0);
2053 if (ret < 0) {
2054 port->irq = 0;
2055 } else {
2056 port->irq = ret;
2057 ourport->rx_irq = ret;
2058 ourport->tx_irq = ret + 1;
2059 }
2060
2061 switch (ourport->info->type) {
2062 case TYPE_S3C24XX:
2063 ret = platform_get_irq(platdev, 1);
2064 if (ret > 0)
2065 ourport->tx_irq = ret;
2066 break;
2067 default:
2068 break;
2069 }
2070
2071 /*
2072 * DMA is currently supported only on DT platforms, if DMA properties
2073 * are specified.
2074 */
2075 if (platdev->dev.of_node && of_find_property(platdev->dev.of_node,
2076 "dmas", NULL)) {
2077 ourport->dma = devm_kzalloc(port->dev,
2078 sizeof(*ourport->dma),
2079 GFP_KERNEL);
2080 if (!ourport->dma) {
2081 ret = -ENOMEM;
2082 goto err;
2083 }
2084 }
2085
2086 ourport->clk = clk_get(&platdev->dev, "uart");
2087 if (IS_ERR(ourport->clk)) {
2088 pr_err("%s: Controller clock not found\n",
2089 dev_name(&platdev->dev));
2090 ret = PTR_ERR(ourport->clk);
2091 goto err;
2092 }
2093
2094 ret = clk_prepare_enable(ourport->clk);
2095 if (ret) {
2096 pr_err("uart: clock failed to prepare+enable: %d\n", ret);
2097 clk_put(ourport->clk);
2098 goto err;
2099 }
2100
2101 ret = s3c24xx_serial_enable_baudclk(ourport);
2102 if (ret)
2103 pr_warn("uart: failed to enable baudclk\n");
2104
2105 /* Keep all interrupts masked and cleared */
2106 switch (ourport->info->type) {
2107 case TYPE_S3C6400:
2108 wr_regl(port, S3C64XX_UINTM, 0xf);
2109 wr_regl(port, S3C64XX_UINTP, 0xf);
2110 wr_regl(port, S3C64XX_UINTSP, 0xf);
2111 break;
2112 case TYPE_APPLE_S5L: {
2113 unsigned int ucon;
2114
2115 ucon = rd_regl(port, S3C2410_UCON);
2116 ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK |
2117 APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
2118 APPLE_S5L_UCON_RXTO_ENA_MSK);
2119 wr_regl(port, S3C2410_UCON, ucon);
2120
2121 wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS);
2122 break;
2123 }
2124 default:
2125 break;
2126 }
2127
2128 dev_dbg(port->dev, "port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n",
2129 &port->mapbase, port->membase, port->irq,
2130 ourport->rx_irq, ourport->tx_irq, port->uartclk);
2131
2132 /* reset the fifos (and setup the uart) */
2133 s3c24xx_serial_resetport(port, cfg);
2134
2135 return 0;
2136
2137err:
2138 port->mapbase = 0;
2139 return ret;
2140}
2141
2142/* Device driver serial port probe */
2143
2144#ifdef CONFIG_OF
2145static const struct of_device_id s3c24xx_uart_dt_match[];
2146#endif
2147
2148static int probe_index;
2149
2150static inline struct s3c24xx_serial_drv_data *
2151s3c24xx_get_driver_data(struct platform_device *pdev)
2152{
2153#ifdef CONFIG_OF
2154 if (pdev->dev.of_node) {
2155 const struct of_device_id *match;
2156
2157 match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node);
2158 return (struct s3c24xx_serial_drv_data *)match->data;
2159 }
2160#endif
2161 return (struct s3c24xx_serial_drv_data *)
2162 platform_get_device_id(pdev)->driver_data;
2163}
2164
2165static int s3c24xx_serial_probe(struct platform_device *pdev)
2166{
2167 struct device_node *np = pdev->dev.of_node;
2168 struct s3c24xx_uart_port *ourport;
2169 int index = probe_index;
2170 int ret, prop = 0;
2171
2172 if (np) {
2173 ret = of_alias_get_id(np, "serial");
2174 if (ret >= 0)
2175 index = ret;
2176 }
2177
2178 if (index >= ARRAY_SIZE(s3c24xx_serial_ports)) {
2179 dev_err(&pdev->dev, "serial%d out of range\n", index);
2180 return -EINVAL;
2181 }
2182 ourport = &s3c24xx_serial_ports[index];
2183
2184 ourport->drv_data = s3c24xx_get_driver_data(pdev);
2185 if (!ourport->drv_data) {
2186 dev_err(&pdev->dev, "could not find driver data\n");
2187 return -ENODEV;
2188 }
2189
2190 ourport->baudclk = ERR_PTR(-EINVAL);
2191 ourport->info = ourport->drv_data->info;
2192 ourport->cfg = (dev_get_platdata(&pdev->dev)) ?
2193 dev_get_platdata(&pdev->dev) :
2194 ourport->drv_data->def_cfg;
2195
2196 switch (ourport->info->type) {
2197 case TYPE_S3C24XX:
2198 ourport->port.ops = &s3c24xx_serial_ops;
2199 break;
2200 case TYPE_S3C6400:
2201 ourport->port.ops = &s3c64xx_serial_ops;
2202 break;
2203 case TYPE_APPLE_S5L:
2204 ourport->port.ops = &apple_s5l_serial_ops;
2205 break;
2206 }
2207
2208 if (np) {
2209 of_property_read_u32(np,
2210 "samsung,uart-fifosize", &ourport->port.fifosize);
2211
2212 if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
2213 switch (prop) {
2214 case 1:
2215 ourport->port.iotype = UPIO_MEM;
2216 break;
2217 case 4:
2218 ourport->port.iotype = UPIO_MEM32;
2219 break;
2220 default:
2221 dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n",
2222 prop);
2223 return -EINVAL;
2224 }
2225 }
2226 }
2227
2228 if (ourport->drv_data->fifosize[index])
2229 ourport->port.fifosize = ourport->drv_data->fifosize[index];
2230 else if (ourport->info->fifosize)
2231 ourport->port.fifosize = ourport->info->fifosize;
2232 ourport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SAMSUNG_CONSOLE);
2233
2234 /*
2235 * DMA transfers must be aligned at least to cache line size,
2236 * so find minimal transfer size suitable for DMA mode
2237 */
2238 ourport->min_dma_size = max_t(int, ourport->port.fifosize,
2239 dma_get_cache_alignment());
2240
2241 dev_dbg(&pdev->dev, "%s: initialising port %p...\n", __func__, ourport);
2242
2243 ret = s3c24xx_serial_init_port(ourport, pdev);
2244 if (ret < 0)
2245 return ret;
2246
2247 if (!s3c24xx_uart_drv.state) {
2248 ret = uart_register_driver(&s3c24xx_uart_drv);
2249 if (ret < 0) {
2250 pr_err("Failed to register Samsung UART driver\n");
2251 return ret;
2252 }
2253 }
2254
2255 dev_dbg(&pdev->dev, "%s: adding port\n", __func__);
2256 uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
2257 platform_set_drvdata(pdev, &ourport->port);
2258
2259 /*
2260 * Deactivate the clock enabled in s3c24xx_serial_init_port here,
2261 * so that a potential re-enablement through the pm-callback overlaps
2262 * and keeps the clock enabled in this case.
2263 */
2264 clk_disable_unprepare(ourport->clk);
2265 if (!IS_ERR(ourport->baudclk))
2266 clk_disable_unprepare(ourport->baudclk);
2267
2268 ret = s3c24xx_serial_cpufreq_register(ourport);
2269 if (ret < 0)
2270 dev_err(&pdev->dev, "failed to add cpufreq notifier\n");
2271
2272 probe_index++;
2273
2274 return 0;
2275}
2276
2277static int s3c24xx_serial_remove(struct platform_device *dev)
2278{
2279 struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
2280
2281 if (port) {
2282 s3c24xx_serial_cpufreq_deregister(to_ourport(port));
2283 uart_remove_one_port(&s3c24xx_uart_drv, port);
2284 }
2285
2286 uart_unregister_driver(&s3c24xx_uart_drv);
2287
2288 return 0;
2289}
2290
2291/* UART power management code */
2292#ifdef CONFIG_PM_SLEEP
2293static int s3c24xx_serial_suspend(struct device *dev)
2294{
2295 struct uart_port *port = s3c24xx_dev_to_port(dev);
2296
2297 if (port)
2298 uart_suspend_port(&s3c24xx_uart_drv, port);
2299
2300 return 0;
2301}
2302
2303static int s3c24xx_serial_resume(struct device *dev)
2304{
2305 struct uart_port *port = s3c24xx_dev_to_port(dev);
2306 struct s3c24xx_uart_port *ourport = to_ourport(port);
2307
2308 if (port) {
2309 clk_prepare_enable(ourport->clk);
2310 if (!IS_ERR(ourport->baudclk))
2311 clk_prepare_enable(ourport->baudclk);
2312 s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
2313 if (!IS_ERR(ourport->baudclk))
2314 clk_disable_unprepare(ourport->baudclk);
2315 clk_disable_unprepare(ourport->clk);
2316
2317 uart_resume_port(&s3c24xx_uart_drv, port);
2318 }
2319
2320 return 0;
2321}
2322
2323static int s3c24xx_serial_resume_noirq(struct device *dev)
2324{
2325 struct uart_port *port = s3c24xx_dev_to_port(dev);
2326 struct s3c24xx_uart_port *ourport = to_ourport(port);
2327
2328 if (port) {
2329 /* restore IRQ mask */
2330 switch (ourport->info->type) {
2331 case TYPE_S3C6400: {
2332 unsigned int uintm = 0xf;
2333
2334 if (ourport->tx_enabled)
2335 uintm &= ~S3C64XX_UINTM_TXD_MSK;
2336 if (ourport->rx_enabled)
2337 uintm &= ~S3C64XX_UINTM_RXD_MSK;
2338 clk_prepare_enable(ourport->clk);
2339 if (!IS_ERR(ourport->baudclk))
2340 clk_prepare_enable(ourport->baudclk);
2341 wr_regl(port, S3C64XX_UINTM, uintm);
2342 if (!IS_ERR(ourport->baudclk))
2343 clk_disable_unprepare(ourport->baudclk);
2344 clk_disable_unprepare(ourport->clk);
2345 break;
2346 }
2347 case TYPE_APPLE_S5L: {
2348 unsigned int ucon;
2349 int ret;
2350
2351 ret = clk_prepare_enable(ourport->clk);
2352 if (ret) {
2353 dev_err(dev, "clk_enable clk failed: %d\n", ret);
2354 return ret;
2355 }
2356 if (!IS_ERR(ourport->baudclk)) {
2357 ret = clk_prepare_enable(ourport->baudclk);
2358 if (ret) {
2359 dev_err(dev, "clk_enable baudclk failed: %d\n", ret);
2360 clk_disable_unprepare(ourport->clk);
2361 return ret;
2362 }
2363 }
2364
2365 ucon = rd_regl(port, S3C2410_UCON);
2366
2367 ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK |
2368 APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
2369 APPLE_S5L_UCON_RXTO_ENA_MSK);
2370
2371 if (ourport->tx_enabled)
2372 ucon |= APPLE_S5L_UCON_TXTHRESH_ENA_MSK;
2373 if (ourport->rx_enabled)
2374 ucon |= APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
2375 APPLE_S5L_UCON_RXTO_ENA_MSK;
2376
2377 wr_regl(port, S3C2410_UCON, ucon);
2378
2379 if (!IS_ERR(ourport->baudclk))
2380 clk_disable_unprepare(ourport->baudclk);
2381 clk_disable_unprepare(ourport->clk);
2382 break;
2383 }
2384 default:
2385 break;
2386 }
2387 }
2388
2389 return 0;
2390}
2391
2392static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
2393 .suspend = s3c24xx_serial_suspend,
2394 .resume = s3c24xx_serial_resume,
2395 .resume_noirq = s3c24xx_serial_resume_noirq,
2396};
2397#define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops)
2398
2399#else /* !CONFIG_PM_SLEEP */
2400
2401#define SERIAL_SAMSUNG_PM_OPS NULL
2402#endif /* CONFIG_PM_SLEEP */
2403
2404/* Console code */
2405
2406#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
2407
2408static struct uart_port *cons_uart;
2409
2410static int
2411s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
2412{
2413 struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
2414 unsigned long ufstat, utrstat;
2415
2416 if (ufcon & S3C2410_UFCON_FIFOMODE) {
2417 /* fifo mode - check amount of data in fifo registers... */
2418
2419 ufstat = rd_regl(port, S3C2410_UFSTAT);
2420 return (ufstat & info->tx_fifofull) ? 0 : 1;
2421 }
2422
2423 /* in non-fifo mode, we go and use the tx buffer empty */
2424
2425 utrstat = rd_regl(port, S3C2410_UTRSTAT);
2426 return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
2427}
2428
2429static bool
2430s3c24xx_port_configured(unsigned int ucon)
2431{
2432 /* consider the serial port configured if the tx/rx mode set */
2433 return (ucon & 0xf) != 0;
2434}
2435
2436#ifdef CONFIG_CONSOLE_POLL
2437/*
2438 * Console polling routines for writing and reading from the uart while
2439 * in an interrupt or debug context.
2440 */
2441
2442static int s3c24xx_serial_get_poll_char(struct uart_port *port)
2443{
2444 struct s3c24xx_uart_port *ourport = to_ourport(port);
2445 unsigned int ufstat;
2446
2447 ufstat = rd_regl(port, S3C2410_UFSTAT);
2448 if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
2449 return NO_POLL_CHAR;
2450
2451 return rd_reg(port, S3C2410_URXH);
2452}
2453
2454static void s3c24xx_serial_put_poll_char(struct uart_port *port,
2455 unsigned char c)
2456{
2457 unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
2458 unsigned int ucon = rd_regl(port, S3C2410_UCON);
2459
2460 /* not possible to xmit on unconfigured port */
2461 if (!s3c24xx_port_configured(ucon))
2462 return;
2463
2464 while (!s3c24xx_serial_console_txrdy(port, ufcon))
2465 cpu_relax();
2466 wr_reg(port, S3C2410_UTXH, c);
2467}
2468
2469#endif /* CONFIG_CONSOLE_POLL */
2470
2471static void
2472s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
2473{
2474 unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
2475
2476 while (!s3c24xx_serial_console_txrdy(port, ufcon))
2477 cpu_relax();
2478 wr_reg(port, S3C2410_UTXH, ch);
2479}
2480
2481static void
2482s3c24xx_serial_console_write(struct console *co, const char *s,
2483 unsigned int count)
2484{
2485 unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
2486
2487 /* not possible to xmit on unconfigured port */
2488 if (!s3c24xx_port_configured(ucon))
2489 return;
2490
2491 uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
2492}
2493
2494static void __init
2495s3c24xx_serial_get_options(struct uart_port *port, int *baud,
2496 int *parity, int *bits)
2497{
2498 struct clk *clk;
2499 unsigned int ulcon;
2500 unsigned int ucon;
2501 unsigned int ubrdiv;
2502 unsigned long rate;
2503 unsigned int clk_sel;
2504 char clk_name[MAX_CLK_NAME_LENGTH];
2505
2506 ulcon = rd_regl(port, S3C2410_ULCON);
2507 ucon = rd_regl(port, S3C2410_UCON);
2508 ubrdiv = rd_regl(port, S3C2410_UBRDIV);
2509
2510 if (s3c24xx_port_configured(ucon)) {
2511 switch (ulcon & S3C2410_LCON_CSMASK) {
2512 case S3C2410_LCON_CS5:
2513 *bits = 5;
2514 break;
2515 case S3C2410_LCON_CS6:
2516 *bits = 6;
2517 break;
2518 case S3C2410_LCON_CS7:
2519 *bits = 7;
2520 break;
2521 case S3C2410_LCON_CS8:
2522 default:
2523 *bits = 8;
2524 break;
2525 }
2526
2527 switch (ulcon & S3C2410_LCON_PMASK) {
2528 case S3C2410_LCON_PEVEN:
2529 *parity = 'e';
2530 break;
2531
2532 case S3C2410_LCON_PODD:
2533 *parity = 'o';
2534 break;
2535
2536 case S3C2410_LCON_PNONE:
2537 default:
2538 *parity = 'n';
2539 }
2540
2541 /* now calculate the baud rate */
2542
2543 clk_sel = s3c24xx_serial_getsource(port);
2544 sprintf(clk_name, "clk_uart_baud%d", clk_sel);
2545
2546 clk = clk_get(port->dev, clk_name);
2547 if (!IS_ERR(clk))
2548 rate = clk_get_rate(clk);
2549 else
2550 rate = 1;
2551
2552 *baud = rate / (16 * (ubrdiv + 1));
2553 dev_dbg(port->dev, "calculated baud %d\n", *baud);
2554 }
2555}
2556
2557static int __init
2558s3c24xx_serial_console_setup(struct console *co, char *options)
2559{
2560 struct uart_port *port;
2561 int baud = 9600;
2562 int bits = 8;
2563 int parity = 'n';
2564 int flow = 'n';
2565
2566 /* is this a valid port */
2567
2568 if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS)
2569 co->index = 0;
2570
2571 port = &s3c24xx_serial_ports[co->index].port;
2572
2573 /* is the port configured? */
2574
2575 if (port->mapbase == 0x0)
2576 return -ENODEV;
2577
2578 cons_uart = port;
2579
2580 /*
2581 * Check whether an invalid uart number has been specified, and
2582 * if so, search for the first available port that does have
2583 * console support.
2584 */
2585 if (options)
2586 uart_parse_options(options, &baud, &parity, &bits, &flow);
2587 else
2588 s3c24xx_serial_get_options(port, &baud, &parity, &bits);
2589
2590 dev_dbg(port->dev, "baud %d\n", baud);
2591
2592 return uart_set_options(port, co, baud, parity, bits, flow);
2593}
2594
2595static struct console s3c24xx_serial_console = {
2596 .name = S3C24XX_SERIAL_NAME,
2597 .device = uart_console_device,
2598 .flags = CON_PRINTBUFFER,
2599 .index = -1,
2600 .write = s3c24xx_serial_console_write,
2601 .setup = s3c24xx_serial_console_setup,
2602 .data = &s3c24xx_uart_drv,
2603};
2604#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
2605
2606#ifdef CONFIG_CPU_S3C2410
2607static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
2608 .info = &(struct s3c24xx_uart_info) {
2609 .name = "Samsung S3C2410 UART",
2610 .type = TYPE_S3C24XX,
2611 .port_type = PORT_S3C2410,
2612 .fifosize = 16,
2613 .rx_fifomask = S3C2410_UFSTAT_RXMASK,
2614 .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
2615 .rx_fifofull = S3C2410_UFSTAT_RXFULL,
2616 .tx_fifofull = S3C2410_UFSTAT_TXFULL,
2617 .tx_fifomask = S3C2410_UFSTAT_TXMASK,
2618 .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
2619 .def_clk_sel = S3C2410_UCON_CLKSEL0,
2620 .num_clks = 2,
2621 .clksel_mask = S3C2410_UCON_CLKMASK,
2622 .clksel_shift = S3C2410_UCON_CLKSHIFT,
2623 },
2624 .def_cfg = &(struct s3c2410_uartcfg) {
2625 .ucon = S3C2410_UCON_DEFAULT,
2626 .ufcon = S3C2410_UFCON_DEFAULT,
2627 },
2628};
2629#define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data)
2630#else
2631#define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2632#endif
2633
2634#ifdef CONFIG_CPU_S3C2412
2635static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
2636 .info = &(struct s3c24xx_uart_info) {
2637 .name = "Samsung S3C2412 UART",
2638 .type = TYPE_S3C24XX,
2639 .port_type = PORT_S3C2412,
2640 .fifosize = 64,
2641 .has_divslot = 1,
2642 .rx_fifomask = S3C2440_UFSTAT_RXMASK,
2643 .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
2644 .rx_fifofull = S3C2440_UFSTAT_RXFULL,
2645 .tx_fifofull = S3C2440_UFSTAT_TXFULL,
2646 .tx_fifomask = S3C2440_UFSTAT_TXMASK,
2647 .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
2648 .def_clk_sel = S3C2410_UCON_CLKSEL2,
2649 .num_clks = 4,
2650 .clksel_mask = S3C2412_UCON_CLKMASK,
2651 .clksel_shift = S3C2412_UCON_CLKSHIFT,
2652 },
2653 .def_cfg = &(struct s3c2410_uartcfg) {
2654 .ucon = S3C2410_UCON_DEFAULT,
2655 .ufcon = S3C2410_UFCON_DEFAULT,
2656 },
2657};
2658#define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data)
2659#else
2660#define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2661#endif
2662
2663#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \
2664 defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442)
2665static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
2666 .info = &(struct s3c24xx_uart_info) {
2667 .name = "Samsung S3C2440 UART",
2668 .type = TYPE_S3C24XX,
2669 .port_type = PORT_S3C2440,
2670 .fifosize = 64,
2671 .has_divslot = 1,
2672 .rx_fifomask = S3C2440_UFSTAT_RXMASK,
2673 .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
2674 .rx_fifofull = S3C2440_UFSTAT_RXFULL,
2675 .tx_fifofull = S3C2440_UFSTAT_TXFULL,
2676 .tx_fifomask = S3C2440_UFSTAT_TXMASK,
2677 .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
2678 .def_clk_sel = S3C2410_UCON_CLKSEL2,
2679 .num_clks = 4,
2680 .clksel_mask = S3C2412_UCON_CLKMASK,
2681 .clksel_shift = S3C2412_UCON_CLKSHIFT,
2682 .ucon_mask = S3C2440_UCON0_DIVMASK,
2683 },
2684 .def_cfg = &(struct s3c2410_uartcfg) {
2685 .ucon = S3C2410_UCON_DEFAULT,
2686 .ufcon = S3C2410_UFCON_DEFAULT,
2687 },
2688};
2689#define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data)
2690#else
2691#define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2692#endif
2693
2694#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
2695static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
2696 .info = &(struct s3c24xx_uart_info) {
2697 .name = "Samsung S3C6400 UART",
2698 .type = TYPE_S3C6400,
2699 .port_type = PORT_S3C6400,
2700 .fifosize = 64,
2701 .has_divslot = 1,
2702 .rx_fifomask = S3C2440_UFSTAT_RXMASK,
2703 .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
2704 .rx_fifofull = S3C2440_UFSTAT_RXFULL,
2705 .tx_fifofull = S3C2440_UFSTAT_TXFULL,
2706 .tx_fifomask = S3C2440_UFSTAT_TXMASK,
2707 .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
2708 .def_clk_sel = S3C2410_UCON_CLKSEL2,
2709 .num_clks = 4,
2710 .clksel_mask = S3C6400_UCON_CLKMASK,
2711 .clksel_shift = S3C6400_UCON_CLKSHIFT,
2712 },
2713 .def_cfg = &(struct s3c2410_uartcfg) {
2714 .ucon = S3C2410_UCON_DEFAULT,
2715 .ufcon = S3C2410_UFCON_DEFAULT,
2716 },
2717};
2718#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data)
2719#else
2720#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2721#endif
2722
2723#ifdef CONFIG_CPU_S5PV210
2724static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
2725 .info = &(struct s3c24xx_uart_info) {
2726 .name = "Samsung S5PV210 UART",
2727 .type = TYPE_S3C6400,
2728 .port_type = PORT_S3C6400,
2729 .has_divslot = 1,
2730 .rx_fifomask = S5PV210_UFSTAT_RXMASK,
2731 .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
2732 .rx_fifofull = S5PV210_UFSTAT_RXFULL,
2733 .tx_fifofull = S5PV210_UFSTAT_TXFULL,
2734 .tx_fifomask = S5PV210_UFSTAT_TXMASK,
2735 .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT,
2736 .def_clk_sel = S3C2410_UCON_CLKSEL0,
2737 .num_clks = 2,
2738 .clksel_mask = S5PV210_UCON_CLKMASK,
2739 .clksel_shift = S5PV210_UCON_CLKSHIFT,
2740 },
2741 .def_cfg = &(struct s3c2410_uartcfg) {
2742 .ucon = S5PV210_UCON_DEFAULT,
2743 .ufcon = S5PV210_UFCON_DEFAULT,
2744 },
2745 .fifosize = { 256, 64, 16, 16 },
2746};
2747#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data)
2748#else
2749#define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2750#endif
2751
2752#if defined(CONFIG_ARCH_EXYNOS)
2753#define EXYNOS_COMMON_SERIAL_DRV_DATA \
2754 .info = &(struct s3c24xx_uart_info) { \
2755 .name = "Samsung Exynos UART", \
2756 .type = TYPE_S3C6400, \
2757 .port_type = PORT_S3C6400, \
2758 .has_divslot = 1, \
2759 .rx_fifomask = S5PV210_UFSTAT_RXMASK, \
2760 .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \
2761 .rx_fifofull = S5PV210_UFSTAT_RXFULL, \
2762 .tx_fifofull = S5PV210_UFSTAT_TXFULL, \
2763 .tx_fifomask = S5PV210_UFSTAT_TXMASK, \
2764 .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \
2765 .def_clk_sel = S3C2410_UCON_CLKSEL0, \
2766 .num_clks = 1, \
2767 .clksel_mask = 0, \
2768 .clksel_shift = 0, \
2769 }, \
2770 .def_cfg = &(struct s3c2410_uartcfg) { \
2771 .ucon = S5PV210_UCON_DEFAULT, \
2772 .ufcon = S5PV210_UFCON_DEFAULT, \
2773 .has_fracval = 1, \
2774 } \
2775
2776static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
2777 EXYNOS_COMMON_SERIAL_DRV_DATA,
2778 .fifosize = { 256, 64, 16, 16 },
2779};
2780
2781static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
2782 EXYNOS_COMMON_SERIAL_DRV_DATA,
2783 .fifosize = { 64, 256, 16, 256 },
2784};
2785
2786#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data)
2787#define EXYNOS5433_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos5433_serial_drv_data)
2788#else
2789#define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2790#define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL
2791#endif
2792
2793#ifdef CONFIG_ARCH_APPLE
2794static struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
2795 .info = &(struct s3c24xx_uart_info) {
2796 .name = "Apple S5L UART",
2797 .type = TYPE_APPLE_S5L,
2798 .port_type = PORT_8250,
2799 .fifosize = 16,
2800 .rx_fifomask = S3C2410_UFSTAT_RXMASK,
2801 .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
2802 .rx_fifofull = S3C2410_UFSTAT_RXFULL,
2803 .tx_fifofull = S3C2410_UFSTAT_TXFULL,
2804 .tx_fifomask = S3C2410_UFSTAT_TXMASK,
2805 .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
2806 .def_clk_sel = S3C2410_UCON_CLKSEL0,
2807 .num_clks = 1,
2808 .clksel_mask = 0,
2809 .clksel_shift = 0,
2810 },
2811 .def_cfg = &(struct s3c2410_uartcfg) {
2812 .ucon = APPLE_S5L_UCON_DEFAULT,
2813 .ufcon = S3C2410_UFCON_DEFAULT,
2814 },
2815};
2816#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)&s5l_serial_drv_data)
2817#else
2818#define S5L_SERIAL_DRV_DATA ((kernel_ulong_t)NULL)
2819#endif
2820
2821static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
2822 {
2823 .name = "s3c2410-uart",
2824 .driver_data = S3C2410_SERIAL_DRV_DATA,
2825 }, {
2826 .name = "s3c2412-uart",
2827 .driver_data = S3C2412_SERIAL_DRV_DATA,
2828 }, {
2829 .name = "s3c2440-uart",
2830 .driver_data = S3C2440_SERIAL_DRV_DATA,
2831 }, {
2832 .name = "s3c6400-uart",
2833 .driver_data = S3C6400_SERIAL_DRV_DATA,
2834 }, {
2835 .name = "s5pv210-uart",
2836 .driver_data = S5PV210_SERIAL_DRV_DATA,
2837 }, {
2838 .name = "exynos4210-uart",
2839 .driver_data = EXYNOS4210_SERIAL_DRV_DATA,
2840 }, {
2841 .name = "exynos5433-uart",
2842 .driver_data = EXYNOS5433_SERIAL_DRV_DATA,
2843 }, {
2844 .name = "s5l-uart",
2845 .driver_data = S5L_SERIAL_DRV_DATA,
2846 },
2847 { },
2848};
2849MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
2850
2851#ifdef CONFIG_OF
2852static const struct of_device_id s3c24xx_uart_dt_match[] = {
2853 { .compatible = "samsung,s3c2410-uart",
2854 .data = (void *)S3C2410_SERIAL_DRV_DATA },
2855 { .compatible = "samsung,s3c2412-uart",
2856 .data = (void *)S3C2412_SERIAL_DRV_DATA },
2857 { .compatible = "samsung,s3c2440-uart",
2858 .data = (void *)S3C2440_SERIAL_DRV_DATA },
2859 { .compatible = "samsung,s3c6400-uart",
2860 .data = (void *)S3C6400_SERIAL_DRV_DATA },
2861 { .compatible = "samsung,s5pv210-uart",
2862 .data = (void *)S5PV210_SERIAL_DRV_DATA },
2863 { .compatible = "samsung,exynos4210-uart",
2864 .data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
2865 { .compatible = "samsung,exynos5433-uart",
2866 .data = (void *)EXYNOS5433_SERIAL_DRV_DATA },
2867 { .compatible = "apple,s5l-uart",
2868 .data = (void *)S5L_SERIAL_DRV_DATA },
2869 {},
2870};
2871MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
2872#endif
2873
2874static struct platform_driver samsung_serial_driver = {
2875 .probe = s3c24xx_serial_probe,
2876 .remove = s3c24xx_serial_remove,
2877 .id_table = s3c24xx_serial_driver_ids,
2878 .driver = {
2879 .name = "samsung-uart",
2880 .pm = SERIAL_SAMSUNG_PM_OPS,
2881 .of_match_table = of_match_ptr(s3c24xx_uart_dt_match),
2882 },
2883};
2884
2885module_platform_driver(samsung_serial_driver);
2886
2887#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
2888/*
2889 * Early console.
2890 */
2891
2892static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val)
2893{
2894 switch (port->iotype) {
2895 case UPIO_MEM:
2896 writeb(val, portaddr(port, reg));
2897 break;
2898 case UPIO_MEM32:
2899 writel(val, portaddr(port, reg));
2900 break;
2901 }
2902}
2903
2904struct samsung_early_console_data {
2905 u32 txfull_mask;
2906};
2907
2908static void samsung_early_busyuart(struct uart_port *port)
2909{
2910 while (!(readl(port->membase + S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXFE))
2911 ;
2912}
2913
2914static void samsung_early_busyuart_fifo(struct uart_port *port)
2915{
2916 struct samsung_early_console_data *data = port->private_data;
2917
2918 while (readl(port->membase + S3C2410_UFSTAT) & data->txfull_mask)
2919 ;
2920}
2921
2922static void samsung_early_putc(struct uart_port *port, int c)
2923{
2924 if (readl(port->membase + S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE)
2925 samsung_early_busyuart_fifo(port);
2926 else
2927 samsung_early_busyuart(port);
2928
2929 wr_reg_barrier(port, S3C2410_UTXH, c);
2930}
2931
2932static void samsung_early_write(struct console *con, const char *s,
2933 unsigned int n)
2934{
2935 struct earlycon_device *dev = con->data;
2936
2937 uart_console_write(&dev->port, s, n, samsung_early_putc);
2938}
2939
2940static int __init samsung_early_console_setup(struct earlycon_device *device,
2941 const char *opt)
2942{
2943 if (!device->port.membase)
2944 return -ENODEV;
2945
2946 device->con->write = samsung_early_write;
2947 return 0;
2948}
2949
2950/* S3C2410 */
2951static struct samsung_early_console_data s3c2410_early_console_data = {
2952 .txfull_mask = S3C2410_UFSTAT_TXFULL,
2953};
2954
2955static int __init s3c2410_early_console_setup(struct earlycon_device *device,
2956 const char *opt)
2957{
2958 device->port.private_data = &s3c2410_early_console_data;
2959 return samsung_early_console_setup(device, opt);
2960}
2961
2962OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart",
2963 s3c2410_early_console_setup);
2964
2965/* S3C2412, S3C2440, S3C64xx */
2966static struct samsung_early_console_data s3c2440_early_console_data = {
2967 .txfull_mask = S3C2440_UFSTAT_TXFULL,
2968};
2969
2970static int __init s3c2440_early_console_setup(struct earlycon_device *device,
2971 const char *opt)
2972{
2973 device->port.private_data = &s3c2440_early_console_data;
2974 return samsung_early_console_setup(device, opt);
2975}
2976
2977OF_EARLYCON_DECLARE(s3c2412, "samsung,s3c2412-uart",
2978 s3c2440_early_console_setup);
2979OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart",
2980 s3c2440_early_console_setup);
2981OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart",
2982 s3c2440_early_console_setup);
2983
2984/* S5PV210, Exynos */
2985static struct samsung_early_console_data s5pv210_early_console_data = {
2986 .txfull_mask = S5PV210_UFSTAT_TXFULL,
2987};
2988
2989static int __init s5pv210_early_console_setup(struct earlycon_device *device,
2990 const char *opt)
2991{
2992 device->port.private_data = &s5pv210_early_console_data;
2993 return samsung_early_console_setup(device, opt);
2994}
2995
2996OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart",
2997 s5pv210_early_console_setup);
2998OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart",
2999 s5pv210_early_console_setup);
3000
3001/* Apple S5L */
3002static int __init apple_s5l_early_console_setup(struct earlycon_device *device,
3003 const char *opt)
3004{
3005 /* Close enough to S3C2410 for earlycon... */
3006 device->port.private_data = &s3c2410_early_console_data;
3007
3008#ifdef CONFIG_ARM64
3009 /* ... but we need to override the existing fixmap entry as nGnRnE */
3010 __set_fixmap(FIX_EARLYCON_MEM_BASE, device->port.mapbase,
3011 __pgprot(PROT_DEVICE_nGnRnE));
3012#endif
3013 return samsung_early_console_setup(device, opt);
3014}
3015
3016OF_EARLYCON_DECLARE(s5l, "apple,s5l-uart", apple_s5l_early_console_setup);
3017#endif
3018
3019MODULE_ALIAS("platform:samsung-uart");
3020MODULE_DESCRIPTION("Samsung SoC Serial port driver");
3021MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
3022MODULE_LICENSE("GPL v2");