1# SPDX-License-Identifier: GPL-2.0-only
   2#
   3# RTC class/drivers configuration
   4#
   5
   6config RTC_LIB
   7	bool
   8
   9config RTC_MC146818_LIB
  10	bool
  11	select RTC_LIB
  12
  13menuconfig RTC_CLASS
  14	bool "Real Time Clock"
  15	default n
  16	depends on !S390
  17	select RTC_LIB
  18	help
  19	  Generic RTC class support. If you say yes here, you will
  20	  be allowed to plug one or more RTCs to your system. You will
  21	  probably want to enable one or more of the interfaces below.
  22
  23if RTC_CLASS
  24
  25config RTC_HCTOSYS
  26	bool "Set system time from RTC on startup and resume"
  27	default y
  28	help
  29	  If you say yes here, the system time (wall clock) will be set using
  30	  the value read from a specified RTC device. This is useful to avoid
  31	  unnecessary fsck runs at boot time, and to network better.
  32
  33config RTC_HCTOSYS_DEVICE
  34	string "RTC used to set the system time"
  35	depends on RTC_HCTOSYS
  36	default "rtc0"
  37	help
  38	  The RTC device that will be used to (re)initialize the system
  39	  clock, usually rtc0. Initialization is done when the system
  40	  starts up, and when it resumes from a low power state. This
  41	  device should record time in UTC, since the kernel won't do
  42	  timezone correction.
  43
  44	  This clock should be battery-backed, so that it reads the correct
  45	  time when the system boots from a power-off state. Otherwise, your
  46	  system will need an external clock source (like an NTP server).
  47
  48	  If the clock you specify here is not battery backed, it may still
  49	  be useful to reinitialize system time when resuming from system
  50	  sleep states. Do not specify an RTC here unless it stays powered
  51	  during all this system's supported sleep states.
  52
  53config RTC_SYSTOHC
  54	bool "Set the RTC time based on NTP synchronization"
  55	default y
  56	help
  57	  If you say yes here, the system time (wall clock) will be stored
  58	  in the RTC specified by RTC_HCTOSYS_DEVICE approximately every 11
  59	  minutes if userspace reports synchronized NTP status.
  60
  61config RTC_SYSTOHC_DEVICE
  62	string "RTC used to synchronize NTP adjustment"
  63	depends on RTC_SYSTOHC
  64	default RTC_HCTOSYS_DEVICE if RTC_HCTOSYS
  65	default "rtc0"
  66	help
  67	  The RTC device used for NTP synchronization. The main difference
  68	  between RTC_HCTOSYS_DEVICE and RTC_SYSTOHC_DEVICE is that this
  69	  one can sleep when setting time, because it runs in the workqueue
  70	  context.
  71
  72config RTC_DEBUG
  73	bool "RTC debug support"
  74	help
  75	  Say yes here to enable debugging support in the RTC framework
  76	  and individual RTC drivers.
  77
  78config RTC_LIB_KUNIT_TEST
  79	tristate "KUnit test for RTC lib functions" if !KUNIT_ALL_TESTS
  80	depends on KUNIT
  81	default KUNIT_ALL_TESTS
  82	help
  83	  Enable this option to test RTC library functions.
  84
  85	  If unsure, say N.
  86
  87config RTC_NVMEM
  88	bool "RTC non volatile storage support"
  89	select NVMEM
  90	default RTC_CLASS
  91	help
  92	  Say yes here to add support for the non volatile (often battery
  93	  backed) storage present on RTCs.
  94
  95comment "RTC interfaces"
  96
  97config RTC_INTF_SYSFS
  98	bool "/sys/class/rtc/rtcN (sysfs)"
  99	depends on SYSFS
 100	default RTC_CLASS
 101	help
 102	  Say yes here if you want to use your RTCs using sysfs interfaces,
 103	  /sys/class/rtc/rtc0 through /sys/.../rtcN.
 104
 105	  If unsure, say Y.
 106
 107config RTC_INTF_PROC
 108	bool "/proc/driver/rtc (procfs for rtcN)"
 109	depends on PROC_FS
 110	default RTC_CLASS
 111	help
 112	  Say yes here if you want to use your system clock RTC through
 113	  the proc interface, /proc/driver/rtc.
 114	  Other RTCs will not be available through that API.
 115	  If there is no RTC for the system clock, then the first RTC(rtc0)
 116	  is used by default.
 117
 118	  If unsure, say Y.
 119
 120config RTC_INTF_DEV
 121	bool "/dev/rtcN (character devices)"
 122	default RTC_CLASS
 123	help
 124	  Say yes here if you want to use your RTCs using the /dev
 125	  interfaces, which "udev" sets up as /dev/rtc0 through
 126	  /dev/rtcN.
 127
 128	  You may want to set up a symbolic link so one of these
 129	  can be accessed as /dev/rtc, which is a name
 130	  expected by "hwclock" and some other programs. Recent
 131	  versions of "udev" are known to set up the symlink for you.
 132
 133	  If unsure, say Y.
 134
 135config RTC_INTF_DEV_UIE_EMUL
 136	bool "RTC UIE emulation on dev interface"
 137	depends on RTC_INTF_DEV
 138	help
 139	  Provides an emulation for RTC_UIE if the underlying rtc chip
 140	  driver does not expose RTC_UIE ioctls. Those requests generate
 141	  once-per-second update interrupts, used for synchronization.
 142
 143	  The emulation code will read the time from the hardware
 144	  clock several times per second, please enable this option
 145	  only if you know that you really need it.
 146
 147config RTC_DRV_TEST
 148	tristate "Test driver/device"
 149	help
 150	  If you say yes here you get support for the
 151	  RTC test driver. It's a software RTC which can be
 152	  used to test the RTC subsystem APIs. It gets
 153	  the time from the system clock.
 154	  You want this driver only if you are doing development
 155	  on the RTC subsystem. Please read the source code
 156	  for further details.
 157
 158	  This driver can also be built as a module. If so, the module
 159	  will be called rtc-test.
 160
 161comment "I2C RTC drivers"
 162
 163if I2C
 164
 165config RTC_DRV_88PM860X
 166	tristate "Marvell 88PM860x"
 167	depends on MFD_88PM860X
 168	help
 169	  If you say yes here you get support for RTC function in Marvell
 170	  88PM860x chips.
 171
 172	  This driver can also be built as a module. If so, the module
 173	  will be called rtc-88pm860x.
 174
 175config RTC_DRV_88PM80X
 176	tristate "Marvell 88PM80x"
 177	depends on MFD_88PM800
 178	help
 179	  If you say yes here you get support for RTC function in Marvell
 180	  88PM80x chips.
 181
 182	  This driver can also be built as a module. If so, the module
 183	  will be called rtc-88pm80x.
 184
 185config RTC_DRV_ABB5ZES3
 186	select REGMAP_I2C
 187	tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3"
 188	help
 189	  If you say yes here you get support for the Abracon
 190	  AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip.
 191
 192	  This driver can also be built as a module. If so, the module
 193	  will be called rtc-ab-b5ze-s3.
 194
 195config RTC_DRV_ABEOZ9
 196	select REGMAP_I2C
 197	tristate "Abracon AB-RTCMC-32.768kHz-EOZ9"
 198	help
 199	  If you say yes here you get support for the Abracon
 200	  AB-RTCMC-32.768kHz-EOA9 I2C RTC chip.
 201
 202	  This driver can also be built as a module. If so, the module
 203	  will be called rtc-ab-e0z9.
 204
 205config RTC_DRV_ABX80X
 206	tristate "Abracon ABx80x"
 207	select WATCHDOG_CORE if WATCHDOG
 208	help
 209	  If you say yes here you get support for Abracon AB080X and AB180X
 210	  families of ultra-low-power  battery- and capacitor-backed real-time
 211	  clock chips.
 212
 213	  This driver can also be built as a module. If so, the module
 214	  will be called rtc-abx80x.
 215
 216config RTC_DRV_AC100
 217	tristate "X-Powers AC100"
 218	depends on MFD_AC100
 219	help
 220	  If you say yes here you get support for the real-time clock found
 221	  in X-Powers AC100 family peripheral ICs.
 222
 223	  This driver can also be built as a module. If so, the module
 224	  will be called rtc-ac100.
 225
 226config RTC_DRV_BRCMSTB
 227	tristate "Broadcom STB wake-timer"
 228	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
 229	default ARCH_BRCMSTB || BMIPS_GENERIC
 230	help
 231	  If you say yes here you get support for the wake-timer found on
 232	  Broadcom STB SoCs (BCM7xxx).
 233
 234	  This driver can also be built as a module. If so, the module will
 235	  be called rtc-brcmstb-waketimer.
 236
 237config RTC_DRV_AS3722
 238	tristate "ams AS3722 RTC driver"
 239	depends on MFD_AS3722
 240	help
 241	  If you say yes here you get support for the RTC of ams AS3722 PMIC
 242	  chips.
 243
 244	  This driver can also be built as a module. If so, the module
 245	  will be called rtc-as3722.
 246
 247config RTC_DRV_DS1307
 248	tristate "Dallas/Maxim DS1307/37/38/39/40/41, ST M41T00, EPSON RX-8025, ISL12057"
 249	select REGMAP_I2C
 250	select WATCHDOG_CORE if WATCHDOG
 251	help
 252	  If you say yes here you get support for various compatible RTC
 253	  chips (often with battery backup) connected with I2C. This driver
 254	  should handle DS1307, DS1337, DS1338, DS1339, DS1340, DS1341,
 255	  ST M41T00, EPSON RX-8025, Intersil ISL12057 and probably other chips.
 256	  In some cases the RTC must already have been initialized (by
 257	  manufacturing or a bootloader).
 258
 259	  The first seven registers on these chips hold an RTC, and other
 260	  registers may add features such as NVRAM, a trickle charger for
 261	  the RTC/NVRAM backup power, and alarms. NVRAM is visible in
 262	  sysfs, but other chip features may not be available.
 263
 264	  This driver can also be built as a module. If so, the module
 265	  will be called rtc-ds1307.
 266
 267config RTC_DRV_DS1307_CENTURY
 268	bool "Century bit support for rtc-ds1307"
 269	depends on RTC_DRV_DS1307
 270	default n
 271	help
 272	  The DS1307 driver suffered from a bug where it was enabling the
 273	  century bit inconditionnally but never used it when reading the time.
 274	  It made the driver unable to support dates beyond 2099.
 275	  Setting this option will add proper support for the century bit but if
 276	  the time was previously set using a kernel predating this option,
 277	  reading the date will return a date in the next century.
 278	  To solve that, you could boot a kernel without this option set, set
 279	  the RTC date and then boot a kernel with this option set.
 280
 281config RTC_DRV_DS1374
 282	tristate "Dallas/Maxim DS1374"
 283	help
 284	  If you say yes here you get support for Dallas Semiconductor
 285	  DS1374 real-time clock chips. If an interrupt is associated
 286	  with the device, the alarm functionality is supported.
 287
 288	  This driver can also be built as a module. If so, the module
 289	  will be called rtc-ds1374.
 290
 291config RTC_DRV_DS1374_WDT
 292	bool "Dallas/Maxim DS1374 watchdog timer"
 293	depends on RTC_DRV_DS1374 && WATCHDOG
 294	select WATCHDOG_CORE
 295	help
 296	  If you say Y here you will get support for the
 297	  watchdog timer in the Dallas Semiconductor DS1374
 298	  real-time clock chips.
 299
 300config RTC_DRV_DS1672
 301	tristate "Dallas/Maxim DS1672"
 302	help
 303	  If you say yes here you get support for the
 304	  Dallas/Maxim DS1672 timekeeping chip.
 305
 306	  This driver can also be built as a module. If so, the module
 307	  will be called rtc-ds1672.
 308
 309config RTC_DRV_HYM8563
 310	tristate "Haoyu Microelectronics HYM8563"
 311	depends on OF
 312	help
 313	  Say Y to enable support for the HYM8563 I2C RTC chip. Apart
 314	  from the usual rtc functions it provides a clock output of
 315	  up to 32kHz.
 316
 317	  This driver can also be built as a module. If so, the module
 318	  will be called rtc-hym8563.
 319
 320config RTC_DRV_LP8788
 321	tristate "TI LP8788 RTC driver"
 322	depends on MFD_LP8788
 323	help
 324	  Say Y to enable support for the LP8788 RTC/ALARM driver.
 325
 326config RTC_DRV_MAX6900
 327	tristate "Maxim MAX6900"
 328	help
 329	  If you say yes here you will get support for the
 330	  Maxim MAX6900 I2C RTC chip.
 331
 332	  This driver can also be built as a module. If so, the module
 333	  will be called rtc-max6900.
 334
 335config RTC_DRV_MAX8907
 336	tristate "Maxim MAX8907"
 337	depends on MFD_MAX8907 || COMPILE_TEST
 338	select REGMAP_IRQ
 339	help
 340	  If you say yes here you will get support for the
 341	  RTC of Maxim MAX8907 PMIC.
 342
 343	  This driver can also be built as a module. If so, the module
 344	  will be called rtc-max8907.
 345
 346config RTC_DRV_MAX8925
 347	tristate "Maxim MAX8925"
 348	depends on MFD_MAX8925
 349	help
 350	  If you say yes here you will get support for the
 351	  RTC of Maxim MAX8925 PMIC.
 352
 353	  This driver can also be built as a module. If so, the module
 354	  will be called rtc-max8925.
 355
 356config RTC_DRV_MAX8998
 357	tristate "Maxim MAX8998"
 358	depends on MFD_MAX8998
 359	help
 360	  If you say yes here you will get support for the
 361	  RTC of Maxim MAX8998 PMIC.
 362
 363	  This driver can also be built as a module. If so, the module
 364	  will be called rtc-max8998.
 365
 366config RTC_DRV_MAX8997
 367	tristate "Maxim MAX8997"
 368	depends on MFD_MAX8997
 369	help
 370	  If you say yes here you will get support for the
 371	  RTC of Maxim MAX8997 PMIC.
 372
 373	  This driver can also be built as a module. If so, the module
 374	  will be called rtc-max8997.
 375
 376config RTC_DRV_MAX31335
 377	tristate "Analog Devices MAX31335"
 378	depends on I2C
 379	depends on COMMON_CLK
 380	depends on HWMON || HWMON=n
 381	select REGMAP_I2C
 382	help
 383	  If you say yes here you get support for the Analog Devices
 384	  MAX31335.
 385
 386	  This driver can also be built as a module. If so, the module
 387	  will be called rtc-max31335.
 388
 389config RTC_DRV_MAX77686
 390	tristate "Maxim MAX77686"
 391	depends on MFD_MAX77686 || MFD_MAX77620 || MFD_MAX77714 || COMPILE_TEST
 392	help
 393	  If you say yes here you will get support for the
 394	  RTC of Maxim MAX77686/MAX77620/MAX77802 PMIC.
 395
 396	  This driver can also be built as a module. If so, the module
 397	  will be called rtc-max77686.
 398
 399config RTC_DRV_NCT3018Y
 400	tristate "Nuvoton NCT3018Y"
 401	depends on OF
 402	help
 403	   If you say yes here you get support for the Nuvoton NCT3018Y I2C RTC
 404	   chip.
 405
 406	   This driver can also be built as a module, if so, the module will be
 407	   called "rtc-nct3018y".
 408
 409config RTC_DRV_RK808
 410	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 RTC"
 411	depends on MFD_RK8XX
 412	help
 413	  If you say yes here you will get support for the
 414	  RTC of RK805, RK809 and RK817, RK808 and RK818 PMIC.
 415
 416	  This driver can also be built as a module. If so, the module
 417	  will be called rk808-rtc.
 418
 419config RTC_DRV_RS5C372
 420	tristate "Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A"
 421	help
 422	  If you say yes here you get support for the
 423	  Ricoh R2025S/D, RS5C372A, RS5C372B, RV5C386, and RV5C387A RTC chips.
 424
 425	  This driver can also be built as a module. If so, the module
 426	  will be called rtc-rs5c372.
 427
 428config RTC_DRV_ISL1208
 429	tristate "Intersil ISL1208"
 430	help
 431	  If you say yes here you get support for the
 432	  Intersil ISL1208 RTC chip.
 433
 434	  This driver can also be built as a module. If so, the module
 435	  will be called rtc-isl1208.
 436
 437config RTC_DRV_ISL12022
 438	tristate "Intersil ISL12022"
 439	select REGMAP_I2C
 440	help
 441	  If you say yes here you get support for the
 442	  Intersil ISL12022 RTC chip.
 443
 444	  This driver can also be built as a module. If so, the module
 445	  will be called rtc-isl12022.
 446
 447config RTC_DRV_ISL12026
 448	tristate "Intersil ISL12026"
 449	depends on OF
 450	help
 451	  If you say yes here you get support for the
 452	  Intersil ISL12026 RTC chip.
 453
 454	  This driver can also be built as a module. If so, the module
 455	  will be called rtc-isl12026.
 456
 457config RTC_DRV_X1205
 458	tristate "Xicor/Intersil X1205"
 459	help
 460	  If you say yes here you get support for the
 461	  Xicor/Intersil X1205 RTC chip.
 462
 463	  This driver can also be built as a module. If so, the module
 464	  will be called rtc-x1205.
 465
 466config RTC_DRV_PCF8523
 467	tristate "NXP PCF8523"
 468	select REGMAP_I2C
 469	help
 470	  If you say yes here you get support for the NXP PCF8523 RTC
 471	  chips.
 472
 473	  This driver can also be built as a module. If so, the module
 474	  will be called rtc-pcf8523.
 475
 476config RTC_DRV_PCF85063
 477	tristate "NXP PCF85063"
 478	select REGMAP_I2C
 479	help
 480	  If you say yes here you get support for the PCF85063 RTC chip
 481
 482	  This driver can also be built as a module. If so, the module
 483	  will be called rtc-pcf85063.
 484
 485config RTC_DRV_PCF85363
 486	tristate "NXP PCF85363"
 487	select REGMAP_I2C
 488	help
 489	  If you say yes here you get support for the PCF85363 RTC chip.
 490
 491	  This driver can also be built as a module. If so, the module
 492	  will be called rtc-pcf85363.
 493
 494	  The nvmem interface will be named pcf85363-#, where # is the
 495	  zero-based instance number.
 496
 497config RTC_DRV_PCF8563
 498	tristate "Philips PCF8563/Epson RTC8564"
 499	help
 500	  If you say yes here you get support for the
 501	  Philips PCF8563 RTC chip. The Epson RTC8564
 502	  should work as well.
 503
 504	  This driver can also be built as a module. If so, the module
 505	  will be called rtc-pcf8563.
 506
 507config RTC_DRV_PCF8583
 508	tristate "Philips PCF8583"
 509	help
 510	  If you say yes here you get support for the Philips PCF8583
 511	  RTC chip found on Acorn RiscPCs. This driver supports the
 512	  platform specific method of retrieving the current year from
 513	  the RTC's SRAM. It will work on other platforms with the same
 514	  chip, but the year will probably have to be tweaked.
 515
 516	  This driver can also be built as a module. If so, the module
 517	  will be called rtc-pcf8583.
 518
 519config RTC_DRV_M41T80
 520	tristate "ST M41T62/65/M41T80/81/82/83/84/85/87 and compatible"
 521	help
 522	  If you say Y here you will get support for the ST M41T60
 523	  and M41T80 RTC chips series. Currently, the following chips are
 524	  supported: M41T62, M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
 525	  M41ST85, M41ST87, and MicroCrystal RV4162.
 526
 527	  This driver can also be built as a module. If so, the module
 528	  will be called rtc-m41t80.
 529
 530config RTC_DRV_M41T80_WDT
 531	bool "ST M41T65/M41T80 series RTC watchdog timer"
 532	depends on RTC_DRV_M41T80
 533	help
 534	  If you say Y here you will get support for the
 535	  watchdog timer in the ST M41T60 and M41T80 RTC chips series.
 536
 537config RTC_DRV_BD70528
 538	tristate "ROHM BD71815 and BD71828 PMIC RTC"
 539	depends on MFD_ROHM_BD71828
 540	help
 541	  If you say Y here you will get support for the RTC
 542	  block on ROHM BD71815 and BD71828 Power Management IC.
 543
 544	  This driver can also be built as a module. If so, the module
 545	  will be called rtc-bd70528.
 546
 547config RTC_DRV_BQ32K
 548	tristate "TI BQ32000"
 549	help
 550	  If you say Y here you will get support for the TI
 551	  BQ32000 I2C RTC chip.
 552
 553	  This driver can also be built as a module. If so, the module
 554	  will be called rtc-bq32k.
 555
 
 
 
 
 
 
 556config RTC_DRV_TWL92330
 557	bool "TI TWL92330/Menelaus"
 558	depends on MENELAUS
 559	help
 560	  If you say yes here you get support for the RTC on the
 561	  TWL92330 "Menelaus" power management chip, used with OMAP2
 562	  platforms. The support is integrated with the rest of
 563	  the Menelaus driver; it's not separate module.
 564
 565config RTC_DRV_TWL4030
 566	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0"
 567	depends on TWL4030_CORE
 568	depends on OF
 569	help
 570	  If you say yes here you get support for the RTC on the
 571	  TWL4030/TWL5030/TWL6030 family chips, used mostly with OMAP3 platforms.
 572
 573	  This driver can also be built as a module. If so, the module
 574	  will be called rtc-twl.
 575
 576config RTC_DRV_PALMAS
 577	tristate "TI Palmas RTC driver"
 578	depends on MFD_PALMAS
 579	help
 580	  If you say yes here you get support for the RTC of TI PALMA series PMIC
 581	  chips.
 582
 583	  This driver can also be built as a module. If so, the module
 584	  will be called rtc-palma.
 585
 586config RTC_DRV_TPS6586X
 587	tristate "TI TPS6586X RTC driver"
 588	depends on MFD_TPS6586X
 589	help
 590	  TI Power Management IC TPS6586X supports RTC functionality
 591	  along with alarm. This driver supports the RTC driver for
 592	  the TPS6586X RTC module.
 593
 594config RTC_DRV_TPS6594
 595	tristate "TI TPS6594 RTC driver"
 596	depends on MFD_TPS6594
 597	default MFD_TPS6594
 598	help
 599	  TI Power Management IC TPS6594 supports RTC functionality
 600	  along with alarm. This driver supports the RTC driver for
 601	  the TPS6594 RTC module.
 602
 603	  This driver can also be built as a module. If so, the module
 604	  will be called rtc-tps6594.
 605
 606config RTC_DRV_TPS65910
 607	tristate "TI TPS65910 RTC driver"
 608	depends on MFD_TPS65910
 609	help
 610	  If you say yes here you get support for the RTC on the
 611	  TPS65910 chips.
 612
 613	  This driver can also be built as a module. If so, the module
 614	  will be called rtc-tps65910.
 615
 
 
 
 
 
 
 
 
 616config RTC_DRV_RC5T583
 617	tristate "RICOH 5T583 RTC driver"
 618	depends on MFD_RC5T583
 619	help
 620	  If you say yes here you get support for the RTC on the
 621	  RICOH 5T583 chips.
 622
 623	  This driver can also be built as a module. If so, the module
 624	  will be called rtc-rc5t583.
 625
 626config RTC_DRV_RC5T619
 627	tristate "RICOH RC5T619 RTC driver"
 628	depends on MFD_RN5T618
 629	help
 630	  If you say yes here you get support for the RTC on the
 631	  RICOH RC5T619 chips.
 632
 633	  This driver can also be built as a module. If so, the module
 634	  will be called rtc-rc5t619.
 635
 636config RTC_DRV_S35390A
 637	tristate "Seiko Instruments S-35390A"
 638	select BITREVERSE
 639	help
 640	  If you say yes here you will get support for the Seiko
 641	  Instruments S-35390A.
 642
 643	  This driver can also be built as a module. If so the module
 644	  will be called rtc-s35390a.
 645
 646config RTC_DRV_FM3130
 647	tristate "Ramtron FM3130"
 648	help
 649	  If you say Y here you will get support for the
 650	  Ramtron FM3130 RTC chips.
 651	  Ramtron FM3130 is a chip with two separate devices inside,
 652	  RTC clock and FRAM. This driver provides only RTC functionality.
 653
 654	  This driver can also be built as a module. If so the module
 655	  will be called rtc-fm3130.
 656
 657config RTC_DRV_RX8010
 658	tristate "Epson RX8010SJ"
 659	select REGMAP_I2C
 660	help
 661	  If you say yes here you get support for the Epson RX8010SJ RTC
 662	  chip.
 663
 664	  This driver can also be built as a module. If so, the module
 665	  will be called rtc-rx8010.
 666
 667config RTC_DRV_RX8581
 668	tristate "Epson RX-8571/RX-8581"
 669	select REGMAP_I2C
 670	help
 671	  If you say yes here you will get support for the Epson RX-8571/
 672	  RX-8581.
 673
 674	  This driver can also be built as a module. If so the module
 675	  will be called rtc-rx8581.
 676
 677config RTC_DRV_RX8025
 678	tristate "Epson RX-8025SA/NB"
 679	help
 680	  If you say yes here you get support for the Epson
 681	  RX-8025SA/NB RTC chips.
 682
 683	  This driver can also be built as a module. If so, the module
 684	  will be called rtc-rx8025.
 685
 686config RTC_DRV_EM3027
 687	tristate "EM Microelectronic EM3027"
 688	help
 689	  If you say yes here you get support for the EM
 690	  Microelectronic EM3027 RTC chips.
 691
 692	  This driver can also be built as a module. If so, the module
 693	  will be called rtc-em3027.
 694
 695config RTC_DRV_RV3028
 696	tristate "Micro Crystal RV3028"
 697	select REGMAP_I2C
 698	help
 699	  If you say yes here you get support for the Micro Crystal
 700	  RV3028.
 701
 702	  This driver can also be built as a module. If so, the module
 703	  will be called rtc-rv3028.
 704
 705config RTC_DRV_RV3032
 706	tristate "Micro Crystal RV3032"
 707	select REGMAP_I2C
 708	help
 709	  If you say yes here you get support for the Micro Crystal
 710	  RV3032.
 711
 712	  This driver can also be built as a module. If so, the module
 713	  will be called rtc-rv3032.
 714
 715config RTC_DRV_RV8803
 716	tristate "Micro Crystal RV8803, Epson RX8900"
 717	help
 718	  If you say yes here you get support for the Micro Crystal RV8803 and
 719	  Epson RX8900 RTC chips.
 720
 721	  This driver can also be built as a module. If so, the module
 722	  will be called rtc-rv8803.
 723
 724config RTC_DRV_S5M
 725	tristate "Samsung S2M/S5M series"
 726	depends on MFD_SEC_CORE || COMPILE_TEST
 727	select REGMAP_IRQ
 728	select REGMAP_I2C
 729	help
 730	  If you say yes here you will get support for the
 731	  RTC of Samsung S2MPS14 and S5M PMIC series.
 732
 733	  This driver can also be built as a module. If so, the module
 734	  will be called rtc-s5m.
 735
 736config RTC_DRV_SD3078
 737	tristate "ZXW Shenzhen whwave SD3078"
 738	select REGMAP_I2C
 739	help
 740	  If you say yes here you get support for the ZXW Shenzhen whwave
 741	  SD3078 RTC chips.
 742
 743	  This driver can also be built as a module. If so, the module
 744	  will be called rtc-sd3078
 745
 746endif # I2C
 747
 748comment "SPI RTC drivers"
 749
 750if SPI_MASTER
 751
 752config RTC_DRV_M41T93
 753	tristate "ST M41T93"
 754	help
 755	  If you say yes here you will get support for the
 756	  ST M41T93 SPI RTC chip.
 757
 758	  This driver can also be built as a module. If so, the module
 759	  will be called rtc-m41t93.
 760
 761config RTC_DRV_M41T94
 762	tristate "ST M41T94"
 763	help
 764	  If you say yes here you will get support for the
 765	  ST M41T94 SPI RTC chip.
 766
 767	  This driver can also be built as a module. If so, the module
 768	  will be called rtc-m41t94.
 769
 770config RTC_DRV_DS1302
 771	tristate "Dallas/Maxim DS1302"
 772	depends on SPI
 773	help
 774	  If you say yes here you get support for the Dallas DS1302 RTC chips.
 775
 776	  This driver can also be built as a module. If so, the module
 777	  will be called rtc-ds1302.
 778
 779config RTC_DRV_DS1305
 780	tristate "Dallas/Maxim DS1305/DS1306"
 781	help
 782	  Select this driver to get support for the Dallas/Maxim DS1305
 783	  and DS1306 real time clock chips. These support a trickle
 784	  charger, alarms, and NVRAM in addition to the clock.
 785
 786	  This driver can also be built as a module. If so, the module
 787	  will be called rtc-ds1305.
 788
 789config RTC_DRV_DS1343
 790	select REGMAP_SPI
 791	tristate "Dallas/Maxim DS1343/DS1344"
 792	help
 793	  If you say yes here you get support for the
 794	  Dallas/Maxim DS1343 and DS1344 real time clock chips.
 795	  Support for trickle charger, alarm is provided.
 796
 797	  This driver can also be built as a module. If so, the module
 798	  will be called rtc-ds1343.
 799
 800config RTC_DRV_DS1347
 801	select REGMAP_SPI
 802	tristate "Dallas/Maxim DS1347"
 803	help
 804	  If you say yes here you get support for the
 805	  Dallas/Maxim DS1347 chips.
 806
 807	  This driver only supports the RTC feature, and not other chip
 808	  features such as alarms.
 809
 810	  This driver can also be built as a module. If so, the module
 811	  will be called rtc-ds1347.
 812
 813config RTC_DRV_DS1390
 814	tristate "Dallas/Maxim DS1390/93/94"
 815	help
 816	  If you say yes here you get support for the
 817	  Dallas/Maxim DS1390/93/94 chips.
 818
 819	  This driver supports the RTC feature and trickle charging but not
 820	  other chip features such as alarms.
 821
 822	  This driver can also be built as a module. If so, the module
 823	  will be called rtc-ds1390.
 824
 825config RTC_DRV_MAX6916
 826	tristate "Maxim MAX6916"
 827	help
 828	  If you say yes here you will get support for the
 829	  Maxim MAX6916 SPI RTC chip.
 830
 831	  This driver only supports the RTC feature, and not other chip
 832	  features such as alarms.
 833
 834	  This driver can also be built as a module. If so, the module
 835	  will be called rtc-max6916.
 836
 837config RTC_DRV_R9701
 838	tristate "Epson RTC-9701JE"
 839	help
 840	  If you say yes here you will get support for the
 841	  Epson RTC-9701JE SPI RTC chip.
 842
 843	  This driver can also be built as a module. If so, the module
 844	  will be called rtc-r9701.
 845
 846config RTC_DRV_RX4581
 847	tristate "Epson RX-4581"
 848	help
 849	  If you say yes here you will get support for the Epson RX-4581.
 850
 851	  This driver can also be built as a module. If so the module
 852	  will be called rtc-rx4581.
 853
 854config RTC_DRV_RS5C348
 855	tristate "Ricoh RS5C348A/B"
 856	help
 857	  If you say yes here you get support for the
 858	  Ricoh RS5C348A and RS5C348B RTC chips.
 859
 860	  This driver can also be built as a module. If so, the module
 861	  will be called rtc-rs5c348.
 862
 863config RTC_DRV_MAX6902
 864	tristate "Maxim MAX6902"
 865	help
 866	  If you say yes here you will get support for the
 867	  Maxim MAX6902 SPI RTC chip.
 868
 869	  This driver can also be built as a module. If so, the module
 870	  will be called rtc-max6902.
 871
 872config RTC_DRV_PCF2123
 873	tristate "NXP PCF2123"
 874	select REGMAP_SPI
 875	help
 876	  If you say yes here you get support for the NXP PCF2123
 877	  RTC chip.
 878
 879	  This driver can also be built as a module. If so, the module
 880	  will be called rtc-pcf2123.
 881
 882config RTC_DRV_MCP795
 883	tristate "Microchip MCP795"
 884	help
 885	  If you say yes here you will get support for the Microchip MCP795.
 886
 887	  This driver can also be built as a module. If so the module
 888	  will be called rtc-mcp795.
 889
 890endif # SPI_MASTER
 891
 892#
 893# Helper to resolve issues with configs that have SPI enabled but I2C
 894# modular.  See SND_SOC_I2C_AND_SPI for more information
 895#
 896config RTC_I2C_AND_SPI
 897	tristate
 898	default m if I2C=m
 899	default y if I2C=y
 900	default y if SPI_MASTER=y
 901
 902comment "SPI and I2C RTC drivers"
 903
 904config RTC_DRV_DS3232
 905	tristate "Dallas/Maxim DS3232/DS3234"
 906	depends on RTC_I2C_AND_SPI
 907	select REGMAP_I2C if I2C
 908	select REGMAP_SPI if SPI_MASTER
 909	help
 910	  If you say yes here you get support for Dallas Semiconductor
 911	  DS3232 and DS3234 real-time clock chips. If an interrupt is associated
 912	  with the device, the alarm functionality is supported.
 913
 914	  This driver can also be built as a module.  If so, the module
 915	  will be called rtc-ds3232.
 916
 917config RTC_DRV_DS3232_HWMON
 918	bool "HWMON support for Dallas/Maxim DS3232/DS3234"
 919	depends on RTC_DRV_DS3232 && HWMON && !(RTC_DRV_DS3232=y && HWMON=m)
 920	default y
 921	help
 922	  Say Y here if you want to expose temperature sensor data on
 923	  rtc-ds3232
 924
 925config RTC_DRV_PCF2127
 926	tristate "NXP PCF2127"
 927	depends on RTC_I2C_AND_SPI
 928	select REGMAP_I2C if I2C
 929	select REGMAP_SPI if SPI_MASTER
 930	select WATCHDOG_CORE if WATCHDOG
 931	help
 932	  If you say yes here you get support for the NXP PCF2127/29/31 RTC
 933	  chips with integrated quartz crystal for industrial applications.
 934	  These chips also have watchdog timer and tamper switch detection
 935	  features.
 936
 937	  PCF2127 has an additional feature of 512 bytes battery backed
 938	  memory that's accessible using nvmem interface.
 939
 940	  This driver can also be built as a module. If so, the module
 941	  will be called rtc-pcf2127.
 942
 943config RTC_DRV_RV3029C2
 944	tristate "Micro Crystal RV3029/3049"
 945	depends on RTC_I2C_AND_SPI
 946	select REGMAP_I2C if I2C
 947	select REGMAP_SPI if SPI_MASTER
 948	help
 949	  If you say yes here you get support for the Micro Crystal
 950	  RV3029 and RV3049 RTC chips.
 951
 952	  This driver can also be built as a module. If so, the module
 953	  will be called rtc-rv3029c2.
 954
 955config RTC_DRV_RV3029_HWMON
 956	bool "HWMON support for RV3029/3049"
 957	depends on RTC_DRV_RV3029C2 && HWMON
 958	depends on !(RTC_DRV_RV3029C2=y && HWMON=m)
 959	default y
 960	help
 961	  Say Y here if you want to expose temperature sensor data on
 962	  rtc-rv3029.
 963
 964config RTC_DRV_RX6110
 965	tristate "Epson RX-6110"
 966	depends on RTC_I2C_AND_SPI
 967	select REGMAP_SPI if SPI_MASTER
 968	select REGMAP_I2C if I2C
 969	help
 970	  If you say yes here you will get support for the Epson RX-6110.
 971
 972	  This driver can also be built as a module. If so the module
 973	  will be called rtc-rx6110.
 974
 975comment "Platform RTC drivers"
 976
 977# this 'CMOS' RTC driver is arch dependent because it requires
 978# <asm/mc146818rtc.h> defining CMOS_READ/CMOS_WRITE, and a
 979# global rtc_lock ... it's not yet just another platform_device.
 980
 981config RTC_DRV_CMOS
 982	tristate "PC-style 'CMOS'"
 983	depends on X86 || ARM || PPC || MIPS || SPARC64
 984	depends on HAS_IOPORT || MACH_DECSTATION
 985	default y if X86
 986	select RTC_MC146818_LIB
 987	help
 988	  Say "yes" here to get direct support for the real time clock
 989	  found in every PC or ACPI-based system, and some other boards.
 990	  Specifically the original MC146818, compatibles like those in
 991	  PC south bridges, the DS12887 or M48T86, some multifunction
 992	  or LPC bus chips, and so on.
 993
 994	  Your system will need to define the platform device used by
 995	  this driver, otherwise it won't be accessible. This means
 996	  you can safely enable this driver if you don't know whether
 997	  or not your board has this kind of hardware.
 998
 999	  This driver can also be built as a module. If so, the module
1000	  will be called rtc-cmos.
1001
1002config RTC_DRV_ALPHA
1003	bool "Alpha PC-style CMOS"
1004	depends on ALPHA
1005	depends on HAS_IOPORT
1006	select RTC_MC146818_LIB
1007	default y
1008	help
1009	  Direct support for the real-time clock found on every Alpha
1010	  system, specifically MC146818 compatibles.  If in doubt, say Y.
1011
1012config RTC_DRV_DS1216
1013	tristate "Dallas DS1216"
1014	depends on SNI_RM
1015	help
1016	  If you say yes here you get support for the Dallas DS1216 RTC chips.
1017
1018config RTC_DRV_DS1286
1019	tristate "Dallas DS1286"
1020	depends on HAS_IOMEM
1021	help
1022	  If you say yes here you get support for the Dallas DS1286 RTC chips.
1023
1024config RTC_DRV_DS1511
1025	tristate "Dallas DS1511"
1026	depends on HAS_IOMEM
1027	help
1028	  If you say yes here you get support for the
1029	  Dallas DS1511 timekeeping/watchdog chip.
1030
1031	  This driver can also be built as a module. If so, the module
1032	  will be called rtc-ds1511.
1033
1034config RTC_DRV_DS1553
1035	tristate "Maxim/Dallas DS1553"
1036	depends on HAS_IOMEM
1037	help
1038	  If you say yes here you get support for the
1039	  Maxim/Dallas DS1553 timekeeping chip.
1040
1041	  This driver can also be built as a module. If so, the module
1042	  will be called rtc-ds1553.
1043
1044config RTC_DRV_DS1685_FAMILY
1045	tristate "Dallas/Maxim DS1685 Family"
1046	depends on HAS_IOMEM
1047	help
1048	  If you say yes here you get support for the Dallas/Maxim DS1685
1049	  family of real time chips.  This family includes the DS1685/DS1687,
1050	  DS1689/DS1693, DS17285/DS17287, DS17485/DS17487, and
1051	  DS17885/DS17887 chips.
1052
1053	  This driver can also be built as a module. If so, the module
1054	  will be called rtc-ds1685.
1055
1056choice
1057	prompt "Subtype"
1058	depends on RTC_DRV_DS1685_FAMILY
1059	default RTC_DRV_DS1685
1060
1061config RTC_DRV_DS1685
1062	bool "DS1685/DS1687"
1063	help
1064	  This enables support for the Dallas/Maxim DS1685/DS1687 real time
1065	  clock chip.
1066
1067	  This chip is commonly found in SGI O2 (IP32) and SGI Octane (IP30)
1068	  systems, as well as EPPC-405-UC modules by electronic system design
1069	  GmbH.
1070
1071config RTC_DRV_DS1689
1072	bool "DS1689/DS1693"
1073	help
1074	  This enables support for the Dallas/Maxim DS1689/DS1693 real time
1075	  clock chip.
1076
1077	  This is an older RTC chip, supplanted by the DS1685/DS1687 above,
1078	  which supports a few minor features such as Vcc, Vbat, and Power
1079	  Cycle counters, plus a customer-specific, 8-byte ROM/Serial number.
1080
1081	  It also works for the even older DS1688/DS1691 RTC chips, which are
1082	  virtually the same and carry the same model number.  Both chips
1083	  have 114 bytes of user NVRAM.
1084
1085config RTC_DRV_DS17285
1086	bool "DS17285/DS17287"
1087	help
1088	  This enables support for the Dallas/Maxim DS17285/DS17287 real time
1089	  clock chip.
1090
1091	  This chip features 2kb of extended NV-SRAM.  It may possibly be
1092	  found in some SGI O2 systems (rare).
1093
1094config RTC_DRV_DS17485
1095	bool "DS17485/DS17487"
1096	help
1097	  This enables support for the Dallas/Maxim DS17485/DS17487 real time
1098	  clock chip.
1099
1100	  This chip features 4kb of extended NV-SRAM.
1101
1102config RTC_DRV_DS17885
1103	bool "DS17885/DS17887"
1104	help
1105	  This enables support for the Dallas/Maxim DS17885/DS17887 real time
1106	  clock chip.
1107
1108	  This chip features 8kb of extended NV-SRAM.
1109
1110endchoice
1111
1112config RTC_DRV_DS1742
1113	tristate "Maxim/Dallas DS1742/1743"
1114	depends on HAS_IOMEM
1115	help
1116	  If you say yes here you get support for the
1117	  Maxim/Dallas DS1742/1743 timekeeping chip.
1118
1119	  This driver can also be built as a module. If so, the module
1120	  will be called rtc-ds1742.
1121
1122config RTC_DRV_DS2404
1123	tristate "Maxim/Dallas DS2404"
1124	help
1125	  If you say yes here you get support for the
1126	  Dallas DS2404 RTC chip.
1127
1128	  This driver can also be built as a module. If so, the module
1129	  will be called rtc-ds2404.
1130
1131config RTC_DRV_DA9052
1132	tristate "Dialog DA9052/DA9053 RTC"
1133	depends on PMIC_DA9052
1134	help
1135	  Say y here to support the RTC driver for Dialog Semiconductor
1136	  DA9052-BC and DA9053-AA/Bx PMICs.
1137
1138config RTC_DRV_DA9055
1139	tristate "Dialog Semiconductor DA9055 RTC"
1140	depends on MFD_DA9055
1141	help
1142	  If you say yes here you will get support for the
1143	  RTC of the Dialog DA9055 PMIC.
1144
1145	  This driver can also be built as a module. If so, the module
1146	  will be called rtc-da9055
1147
1148config RTC_DRV_DA9063
1149	tristate "Dialog Semiconductor DA9063/DA9062 RTC"
1150	depends on MFD_DA9063 || MFD_DA9062
1151	help
1152	  If you say yes here you will get support for the RTC subsystem
1153	  for the Dialog Semiconductor PMIC chips DA9063 and DA9062.
1154
1155	  This driver can also be built as a module. If so, the module
1156	  will be called "rtc-da9063".
1157
1158config RTC_DRV_EFI
1159	tristate "EFI RTC"
1160	depends on EFI && !X86
1161	help
1162	  If you say yes here you will get support for the EFI
1163	  Real Time Clock.
1164
1165	  This driver can also be built as a module. If so, the module
1166	  will be called rtc-efi.
1167
1168config RTC_DRV_STK17TA8
1169	tristate "Simtek STK17TA8"
1170	depends on HAS_IOMEM
1171	help
1172	  If you say yes here you get support for the
1173	  Simtek STK17TA8 timekeeping chip.
1174
1175	  This driver can also be built as a module. If so, the module
1176	  will be called rtc-stk17ta8.
1177
1178config RTC_DRV_M48T86
1179	tristate "ST M48T86/Dallas DS12887"
1180	depends on HAS_IOMEM
1181	help
1182	  If you say Y here you will get support for the
1183	  ST M48T86 and Dallas DS12887 RTC chips.
1184
1185	  This driver can also be built as a module. If so, the module
1186	  will be called rtc-m48t86.
1187
1188config RTC_DRV_M48T35
1189	tristate "ST M48T35"
1190	depends on HAS_IOMEM
1191	help
1192	  If you say Y here you will get support for the
1193	  ST M48T35 RTC chip.
1194
1195	  This driver can also be built as a module, if so, the module
1196	  will be called "rtc-m48t35".
1197
1198config RTC_DRV_M48T59
1199	tristate "ST M48T59/M48T08/M48T02"
1200	depends on HAS_IOMEM
1201	help
1202	  If you say Y here you will get support for the
1203	  ST M48T59 RTC chip and compatible ST M48T08 and M48T02.
1204
1205	  These chips are usually found in Sun SPARC and UltraSPARC
1206	  workstations.
1207
1208	  This driver can also be built as a module, if so, the module
1209	  will be called "rtc-m48t59".
1210
1211config RTC_DRV_MSM6242
1212	tristate "Oki MSM6242"
1213	depends on HAS_IOMEM
1214	help
1215	  If you say yes here you get support for the Oki MSM6242
1216	  timekeeping chip. It is used in some Amiga models (e.g. A2000).
1217
1218	  This driver can also be built as a module. If so, the module
1219	  will be called rtc-msm6242.
1220
1221config RTC_DRV_BQ4802
1222	tristate "TI BQ4802"
1223	depends on HAS_IOMEM && HAS_IOPORT
1224	depends on SPARC || COMPILE_TEST
1225	help
1226	  If you say Y here you will get support for the TI
1227	  BQ4802 RTC chip.
1228
1229	  This driver can also be built as a module. If so, the module
1230	  will be called rtc-bq4802.
1231
1232config RTC_DRV_RP5C01
1233	tristate "Ricoh RP5C01"
1234	depends on HAS_IOMEM
1235	help
1236	  If you say yes here you get support for the Ricoh RP5C01
1237	  timekeeping chip. It is used in some Amiga models (e.g. A3000
1238	  and A4000).
1239
1240	  This driver can also be built as a module. If so, the module
1241	  will be called rtc-rp5c01.
1242
1243config RTC_DRV_GAMECUBE
1244	tristate "Nintendo GameCube, Wii and Wii U RTC"
1245	depends on GAMECUBE || WII || COMPILE_TEST
1246	select REGMAP
1247	help
1248	  If you say yes here you will get support for the RTC subsystem
1249	  of the Nintendo GameCube, Wii and Wii U.
1250
1251	  This driver can also be built as a module. If so, the module
1252	  will be called "rtc-gamecube".
1253
1254config RTC_DRV_WM831X
1255	tristate "Wolfson Microelectronics WM831x RTC"
1256	depends on MFD_WM831X
1257	help
1258	  If you say yes here you will get support for the RTC subsystem
1259	  of the Wolfson Microelectronics WM831X series PMICs.
1260
1261	  This driver can also be built as a module. If so, the module
1262	  will be called "rtc-wm831x".
1263
1264config RTC_DRV_WM8350
1265	tristate "Wolfson Microelectronics WM8350 RTC"
1266	depends on MFD_WM8350
1267	help
1268	  If you say yes here you will get support for the RTC subsystem
1269	  of the Wolfson Microelectronics WM8350.
1270
1271	  This driver can also be built as a module. If so, the module
1272	  will be called "rtc-wm8350".
1273
1274config RTC_DRV_SC27XX
1275	tristate "Spreadtrum SC27xx RTC"
1276	depends on MFD_SC27XX_PMIC || COMPILE_TEST
1277	help
1278	  If you say Y here you will get support for the RTC subsystem
1279	  of the Spreadtrum SC27xx series PMICs. The SC27xx series PMICs
1280	  includes the SC2720, SC2721, SC2723, SC2730 and SC2731 chips.
1281
1282	  This driver can also be built as a module. If so, the module
1283	  will be called rtc-sc27xx.
1284
1285config RTC_DRV_SPEAR
1286	tristate "SPEAR ST RTC"
1287	depends on PLAT_SPEAR || COMPILE_TEST
1288	default y
1289	help
1290	 If you say Y here you will get support for the RTC found on
1291	 spear
1292
1293config RTC_DRV_PCF50633
1294	depends on MFD_PCF50633
1295	tristate "NXP PCF50633 RTC"
1296	help
1297	  If you say yes here you get support for the RTC subsystem of the
1298	  NXP PCF50633 used in embedded systems.
1299
1300config RTC_DRV_AB8500
1301	tristate "ST-Ericsson AB8500 RTC"
1302	depends on AB8500_CORE
1303	select RTC_INTF_DEV
1304	select RTC_INTF_DEV_UIE_EMUL
1305	help
1306	  Select this to enable the ST-Ericsson AB8500 power management IC RTC
1307	  support. This chip contains a battery- and capacitor-backed RTC.
1308
1309config RTC_DRV_OPAL
1310	tristate "IBM OPAL RTC driver"
1311	depends on PPC_POWERNV
1312	default y
1313	help
1314	  If you say yes here you get support for the PowerNV platform RTC
1315	  driver based on OPAL interfaces.
1316
1317	  This driver can also be built as a module. If so, the module
1318	  will be called rtc-opal.
1319
1320config RTC_DRV_OPTEE
1321	tristate "OP-TEE based RTC driver"
1322	depends on OPTEE
1323	help
1324	  Select this to get support for OP-TEE based RTC control on SoCs where
1325	  RTC are not accessible to the normal world (Linux).
1326
1327	  This driver can also be built as a module. If so, the module
1328	  will be called rtc-optee.
1329
1330config RTC_DRV_ZYNQMP
1331	tristate "Xilinx Zynq Ultrascale+ MPSoC RTC"
1332	depends on OF && HAS_IOMEM
1333	help
1334	  If you say yes here you get support for the RTC controller found on
1335	  Xilinx Zynq Ultrascale+ MPSoC.
1336
1337config RTC_DRV_CROS_EC
1338	tristate "Chrome OS EC RTC driver"
1339	depends on CROS_EC
1340	help
1341	  If you say yes here you will get support for the
1342	  Chrome OS Embedded Controller's RTC.
1343
1344	  This driver can also be built as a module. If so, the module
1345	  will be called rtc-cros-ec.
1346
1347config RTC_DRV_NTXEC
1348	tristate "Netronix embedded controller RTC"
1349	depends on MFD_NTXEC
1350	help
1351	  Say yes here if you want to support the RTC functionality of the
1352	  embedded controller found in certain e-book readers designed by the
1353	  original design manufacturer Netronix.
1354
1355comment "on-CPU RTC drivers"
1356
1357config RTC_DRV_ASM9260
1358	tristate "Alphascale asm9260 RTC"
1359	depends on MACH_ASM9260 || COMPILE_TEST
1360	help
1361	  If you say yes here you get support for the RTC on the
1362	  Alphascale asm9260 SoC.
1363
1364	  This driver can also be built as a module. If so, the module
1365	  will be called rtc-asm9260.
1366
 
 
 
 
 
 
 
 
 
 
1367config RTC_DRV_DIGICOLOR
1368	tristate "Conexant Digicolor RTC"
1369	depends on ARCH_DIGICOLOR || COMPILE_TEST
1370	help
1371	  If you say yes here you get support for the RTC on Conexant
1372	  Digicolor platforms. This currently includes the CX92755 SoC.
1373
1374	  This driver can also be built as a module. If so, the module
1375	  will be called rtc-digicolor.
1376
1377config RTC_DRV_IMXDI
1378	tristate "Freescale IMX DryIce Real Time Clock"
1379	depends on ARCH_MXC || COMPILE_TEST
1380	depends on OF
1381	help
1382	   Support for Freescale IMX DryIce RTC
1383
1384	   This driver can also be built as a module, if so, the module
1385	   will be called "rtc-imxdi".
1386
1387config RTC_DRV_FSL_FTM_ALARM
1388	tristate "Freescale FlexTimer alarm timer"
1389	depends on ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
1390	help
1391	   For the FlexTimer in LS1012A, LS1021A, LS1028A, LS1043A, LS1046A,
1392	   LS1088A, LS208xA, we can use FTM as the wakeup source.
1393
1394	   Say y here to enable FTM alarm support. The FTM alarm provides
1395	   alarm functions for wakeup system from deep sleep.
1396
1397	   This driver can also be built as a module, if so, the module
1398	   will be called "rtc-fsl-ftm-alarm".
1399
1400config RTC_DRV_MESON
1401	tristate "Amlogic Meson RTC"
1402	depends on (ARM && ARCH_MESON) || COMPILE_TEST
1403	select REGMAP_MMIO
1404	help
1405	   Support for the RTC block on the Amlogic Meson6, Meson8, Meson8b
1406	   and Meson8m2 SoCs.
1407
1408	   This driver can also be built as a module, if so, the module
1409	   will be called "rtc-meson".
1410
1411config RTC_DRV_MESON_VRTC
1412	tristate "Amlogic Meson Virtual RTC"
1413	depends on ARCH_MESON || COMPILE_TEST
1414	default m if ARCH_MESON
1415	help
1416	  If you say yes here you will get support for the
1417	  Virtual RTC of Amlogic SoCs.
1418
1419	  This driver can also be built as a module. If so, the module
1420	  will be called rtc-meson-vrtc.
1421
1422config RTC_DRV_OMAP
1423	tristate "TI OMAP Real Time Clock"
1424	depends on ARCH_OMAP || ARCH_DAVINCI || COMPILE_TEST
1425	depends on OF
1426	depends on PINCTRL
1427	select GENERIC_PINCONF
1428	help
1429	  Say "yes" here to support the on chip real time clock
1430	  present on TI OMAP1, AM33xx, DA8xx/OMAP-L13x, AM43xx and DRA7xx.
1431
1432	  This driver can also be built as a module, if so, module
1433	  will be called rtc-omap.
1434
 
 
 
 
 
 
 
1435config RTC_DRV_S3C
1436	tristate "Samsung S3C series SoC RTC"
1437	depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || \
1438		   COMPILE_TEST
1439	help
1440	  RTC (Realtime Clock) driver for the clock inbuilt into the
1441	  Samsung S3C64XX series of SoCs. This can provide periodic
1442	  interrupt rates from 1Hz to 64Hz for user programs, and
1443	  wakeup from Alarm.
1444
 
 
 
 
1445	  This driver can also be build as a module. If so, the module
1446	  will be called rtc-s3c.
1447
1448config RTC_DRV_EP93XX
1449	tristate "Cirrus Logic EP93XX"
1450	depends on ARCH_EP93XX || COMPILE_TEST
1451	help
1452	  If you say yes here you get support for the
1453	  RTC embedded in the Cirrus Logic EP93XX processors.
1454
1455	  This driver can also be built as a module. If so, the module
1456	  will be called rtc-ep93xx.
1457
1458config RTC_DRV_SA1100
1459	tristate "SA11x0/PXA2xx/PXA910"
1460	depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP
1461	help
1462	  If you say Y here you will get access to the real time clock
1463	  built into your SA11x0 or PXA2xx CPU.
1464
1465	  To compile this driver as a module, choose M here: the
1466	  module will be called rtc-sa1100.
1467
1468config RTC_DRV_SH
1469	tristate "SuperH On-Chip RTC"
1470	depends on SUPERH || ARCH_RENESAS
1471	help
1472	  Say Y here to enable support for the on-chip RTC found in
1473	  most SuperH processors. This RTC is also found in RZ/A SoCs.
1474
1475	  To compile this driver as a module, choose M here: the
1476	  module will be called rtc-sh.
1477
1478config RTC_DRV_SUNPLUS
1479	tristate "Sunplus SP7021 RTC"
1480	depends on SOC_SP7021
1481	help
1482	  Say 'yes' to get support for the real-time clock present in
1483	  Sunplus SP7021 - a SoC for industrial applications. It provides
1484	  RTC status check, timer/alarm functionalities, user data
1485	  reservation with the battery over 2.5V, RTC power status check
1486	  and battery charge.
1487
1488	  This driver can also be built as a module. If so, the module
1489	  will be called rtc-sunplus.
1490
1491config RTC_DRV_PL030
1492	tristate "ARM AMBA PL030 RTC"
1493	depends on ARM_AMBA
1494	help
1495	  If you say Y here you will get access to ARM AMBA
1496	  PrimeCell PL030 RTC found on certain ARM SOCs.
1497
1498	  To compile this driver as a module, choose M here: the
1499	  module will be called rtc-pl030.
1500
1501config RTC_DRV_PL031
1502	tristate "ARM AMBA PL031 RTC"
1503	depends on ARM_AMBA
1504	help
1505	  If you say Y here you will get access to ARM AMBA
1506	  PrimeCell PL031 RTC found on certain ARM SOCs.
1507
1508	  To compile this driver as a module, choose M here: the
1509	  module will be called rtc-pl031.
1510
1511config RTC_DRV_AT91RM9200
1512	tristate "AT91RM9200 or some AT91SAM9 RTC"
1513	depends on ARCH_AT91 || COMPILE_TEST
1514	depends on OF
1515	help
1516	  Driver for the internal RTC (Realtime Clock) module found on
1517	  Atmel AT91RM9200's and some  AT91SAM9 chips. On AT91SAM9 chips
1518	  this is powered by the backup power supply.
1519
1520config RTC_DRV_AT91SAM9
1521	tristate "AT91SAM9 RTT as RTC"
1522	depends on ARCH_AT91 || COMPILE_TEST
1523	depends on OF && HAS_IOMEM
1524	select MFD_SYSCON
1525	help
1526	  Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which
1527	  can be used as an RTC thanks to the backup power supply (e.g. a
1528	  small coin cell battery) which keeps this block and the GPBR
1529	  (General Purpose Backup Registers) block powered when the device
1530	  is shutdown.
1531	  Some AT91SAM9 SoCs provide a real RTC block, on those ones you'd
1532	  probably want to use the real RTC block instead of the "RTT as an
1533	  RTC" driver.
1534
1535config RTC_DRV_AU1XXX
1536	tristate "Au1xxx Counter0 RTC support"
1537	depends on MIPS_ALCHEMY
1538	help
1539	  This is a driver for the Au1xxx on-chip Counter0 (Time-Of-Year
1540	  counter) to be used as a RTC.
1541
1542	  This driver can also be built as a module. If so, the module
1543	  will be called rtc-au1xxx.
1544
1545config RTC_DRV_RS5C313
1546	tristate "Ricoh RS5C313"
1547	depends on SH_LANDISK
1548	help
1549	  If you say yes here you get support for the Ricoh RS5C313 RTC chips.
1550
1551config RTC_DRV_RZN1
1552	tristate "Renesas RZ/N1 RTC"
1553	depends on ARCH_RZN1 || COMPILE_TEST
1554	depends on OF && HAS_IOMEM
1555	help
1556	  If you say yes here you get support for the Renesas RZ/N1 RTC.
1557
1558config RTC_DRV_GENERIC
1559	tristate "Generic RTC support"
1560	# Please consider writing a new RTC driver instead of using the generic
1561	# RTC abstraction
1562	depends on PARISC || M68K || PPC || SUPERH || COMPILE_TEST
1563	help
1564	  Say Y or M here to enable RTC support on systems using the generic
1565	  RTC abstraction. If you do not know what you are doing, you should
1566	  just say Y.
1567
1568config RTC_DRV_PXA
1569	tristate "PXA27x/PXA3xx"
1570	depends on ARCH_PXA
1571	select RTC_DRV_SA1100
1572	help
1573	 If you say Y here you will get access to the real time clock
1574	 built into your PXA27x or PXA3xx CPU. This RTC is actually 2 RTCs
1575	 consisting of an SA1100 compatible RTC and the extended PXA RTC.
1576
1577	 This RTC driver uses PXA RTC registers available since pxa27x
1578	 series (RDxR, RYxR) instead of legacy RCNR, RTAR.
1579
1580config RTC_DRV_VT8500
1581	tristate "VIA/WonderMedia 85xx SoC RTC"
1582	depends on ARCH_VT8500 || COMPILE_TEST
1583	help
1584	  If you say Y here you will get access to the real time clock
1585	  built into your VIA VT8500 SoC or its relatives.
1586
1587
1588config RTC_DRV_SUN4V
1589	bool "SUN4V Hypervisor RTC"
1590	depends on SPARC64
1591	help
1592	  If you say Y here you will get support for the Hypervisor
1593	  based RTC on SUN4V systems.
1594
1595config RTC_DRV_SUN6I
1596	bool "Allwinner A31 RTC"
1597	default MACH_SUN6I || MACH_SUN8I
1598	depends on COMMON_CLK
1599	depends on ARCH_SUNXI || COMPILE_TEST
1600	help
1601	  If you say Y here you will get support for the RTC found in
1602	  some Allwinner SoCs like the A31 or the A64.
1603
1604config RTC_DRV_SUNXI
1605	tristate "Allwinner sun4i/sun7i RTC"
1606	depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST
1607	help
1608	  If you say Y here you will get support for the RTC found on
1609	  Allwinner A10/A20.
1610
1611config RTC_DRV_STARFIRE
1612	bool "Starfire RTC"
1613	depends on SPARC64
1614	help
1615	  If you say Y here you will get support for the RTC found on
1616	  Starfire systems.
1617
1618config RTC_DRV_MV
1619	tristate "Marvell SoC RTC"
1620	depends on ARCH_DOVE || ARCH_MVEBU || COMPILE_TEST
1621	help
1622	  If you say yes here you will get support for the in-chip RTC
1623	  that can be found in some of Marvell's SoC devices, such as
1624	  the Kirkwood 88F6281 and 88F6192.
1625
1626	  This driver can also be built as a module. If so, the module
1627	  will be called rtc-mv.
1628
1629config RTC_DRV_ARMADA38X
1630	tristate "Armada 38x Marvell SoC RTC"
1631	depends on ARCH_MVEBU || COMPILE_TEST
1632	depends on OF
1633	help
1634	  If you say yes here you will get support for the in-chip RTC
1635	  that can be found in the Armada 38x Marvell's SoC device
1636
1637	  This driver can also be built as a module. If so, the module
1638	  will be called armada38x-rtc.
1639
1640config RTC_DRV_CADENCE
1641	tristate "Cadence RTC driver"
1642	depends on OF && HAS_IOMEM
1643	help
1644	  If you say Y here you will get access to Cadence RTC IP
1645	  found on certain SOCs.
1646
1647	  To compile this driver as a module, choose M here: the
1648	  module will be called rtc-cadence.
1649
1650config RTC_DRV_FTRTC010
1651	tristate "Faraday Technology FTRTC010 RTC"
1652	depends on HAS_IOMEM
1653	default ARCH_GEMINI
1654	help
1655	  If you say Y here you will get support for the
1656	  Faraday Technolog FTRTC010 found on e.g. Gemini SoC's.
1657
1658	  This driver can also be built as a module. If so, the module
1659	  will be called rtc-ftrtc010.
1660
1661config RTC_DRV_PS3
1662	tristate "PS3 RTC"
1663	depends on PPC_PS3
1664	help
1665	  If you say yes here you will get support for the RTC on PS3.
1666
1667	  This driver can also be built as a module. If so, the module
1668	  will be called rtc-ps3.
1669
1670config RTC_DRV_STMP
1671	tristate "Freescale STMP3xxx/i.MX23/i.MX28 RTC"
1672	depends on ARCH_MXS || COMPILE_TEST
1673	select STMP_DEVICE
1674	help
1675	  If you say yes here you will get support for the onboard
1676	  STMP3xxx/i.MX23/i.MX28 RTC.
1677
1678	  This driver can also be built as a module. If so, the module
1679	  will be called rtc-stmp3xxx.
1680
1681config RTC_DRV_PCAP
1682	tristate "PCAP RTC"
1683	depends on EZX_PCAP
1684	help
1685	  If you say Y here you will get support for the RTC found on
1686	  the PCAP2 ASIC used on some Motorola phones.
1687
1688config RTC_DRV_MC13XXX
1689	depends on MFD_MC13XXX
1690	tristate "Freescale MC13xxx RTC"
1691	help
1692	  This enables support for the RTCs found on Freescale's PMICs
1693	  MC13783 and MC13892.
1694
1695config RTC_DRV_MPC5121
1696	tristate "Freescale MPC5121 built-in RTC"
1697	depends on PPC_MPC512x || PPC_MPC52xx
1698	help
1699	  If you say yes here you will get support for the
1700	  built-in RTC on MPC5121 or on MPC5200.
1701
1702	  This driver can also be built as a module. If so, the module
1703	  will be called rtc-mpc5121.
1704
1705config RTC_DRV_JZ4740
1706	tristate "Ingenic JZ4740 SoC"
1707	depends on MIPS || COMPILE_TEST
1708	depends on OF && COMMON_CLK
1709	help
1710	  If you say yes here you get support for the Ingenic JZ47xx SoCs RTC
1711	  controllers.
1712
1713	  This driver can also be built as a module. If so, the module
1714	  will be called rtc-jz4740.
1715
1716config RTC_DRV_LOONGSON
1717	tristate "Loongson On-chip RTC"
1718	depends on MACH_LOONGSON32 || MACH_LOONGSON64 || COMPILE_TEST
1719	select REGMAP_MMIO
1720	help
1721	  This is a driver for the Loongson on-chip Counter0 (Time-Of-Year
1722	  counter) to be used as a RTC.
1723	  It can be found on Loongson-1 series cpu, Loongson-2K series cpu
1724	  and Loongson LS7A bridge chips.
1725
1726	  This driver can also be built as a module. If so, the module
1727	  will be called rtc-loongson.
1728
1729config RTC_DRV_LPC24XX
1730	tristate "NXP RTC for LPC178x/18xx/408x/43xx"
1731	depends on ARCH_LPC18XX || COMPILE_TEST
1732	depends on OF && HAS_IOMEM
1733	depends on COMMON_CLK
1734	help
1735	  This enables support for the NXP RTC found which can be found on
1736	  NXP LPC178x/18xx/408x/43xx devices.
1737
1738	  If you have one of the devices above enable this driver to use
1739	  the hardware RTC. This driver can also be built as a module. If
1740	  so, the module will be called rtc-lpc24xx.
1741
1742config RTC_DRV_LPC32XX
1743	depends on ARCH_LPC32XX || COMPILE_TEST
1744	tristate "NXP LPC32XX RTC"
1745	help
1746	  This enables support for the NXP RTC in the LPC32XX
1747
1748	  This driver can also be built as a module. If so, the module
1749	  will be called rtc-lpc32xx.
1750
1751config RTC_DRV_PM8XXX
1752	tristate "Qualcomm PMIC8XXX RTC"
1753	depends on MFD_PM8XXX || MFD_SPMI_PMIC || COMPILE_TEST
1754	help
1755	  If you say yes here you get support for the
1756	  Qualcomm PMIC8XXX RTC.
1757
1758	  To compile this driver as a module, choose M here: the
1759	  module will be called rtc-pm8xxx.
1760
1761config RTC_DRV_TEGRA
1762	tristate "NVIDIA Tegra Internal RTC driver"
1763	depends on ARCH_TEGRA || COMPILE_TEST
1764	help
1765	  If you say yes here you get support for the
1766	  Tegra 200 series internal RTC module.
1767
1768	  This drive can also be built as a module. If so, the module
1769	  will be called rtc-tegra.
1770
 
 
 
 
 
 
 
 
 
 
1771config RTC_DRV_MXC
1772	tristate "Freescale MXC Real Time Clock"
1773	depends on ARCH_MXC || COMPILE_TEST
1774	depends on HAS_IOMEM
1775	depends on OF
1776	help
1777	   If you say yes here you get support for the Freescale MXC
1778	   RTC module.
1779
1780	   This driver can also be built as a module, if so, the module
1781	   will be called "rtc-mxc".
1782
1783config RTC_DRV_MXC_V2
1784	tristate "Freescale MXC Real Time Clock for i.MX53"
1785	depends on ARCH_MXC || COMPILE_TEST
1786	depends on HAS_IOMEM
1787	depends on OF
1788	help
1789	   If you say yes here you get support for the Freescale MXC
1790	   SRTC module in i.MX53 processor.
1791
1792	   This driver can also be built as a module, if so, the module
1793	   will be called "rtc-mxc_v2".
1794
1795config RTC_DRV_SNVS
1796	tristate "Freescale SNVS RTC support"
1797	select REGMAP_MMIO
1798	depends on ARCH_MXC || COMPILE_TEST
1799	depends on HAS_IOMEM
1800	depends on OF
1801	help
1802	   If you say yes here you get support for the Freescale SNVS
1803	   Low Power (LP) RTC module.
1804
1805	   This driver can also be built as a module, if so, the module
1806	   will be called "rtc-snvs".
1807
1808config RTC_DRV_BBNSM
1809	tristate "NXP BBNSM RTC support"
1810	select REGMAP_MMIO
1811	depends on ARCH_MXC || COMPILE_TEST
1812	depends on HAS_IOMEM
1813	depends on OF
1814	help
1815	   If you say yes here you get support for the NXP BBNSM RTC module.
1816
1817	   This driver can also be built as a module, if so, the module
1818	   will be called "rtc-bbnsm".
1819
1820config RTC_DRV_IMX_SC
1821	depends on IMX_SCU
1822	depends on HAVE_ARM_SMCCC
1823	tristate "NXP i.MX System Controller RTC support"
1824	help
1825	   If you say yes here you get support for the NXP i.MX System
1826	   Controller RTC module.
1827
1828config RTC_DRV_ST_LPC
1829	tristate "STMicroelectronics LPC RTC"
1830	depends on ARCH_STI
1831	depends on OF
1832	help
1833	  Say Y here to include STMicroelectronics Low Power Controller
1834	  (LPC) based RTC support.
1835
1836	  To compile this driver as a module, choose M here: the
1837	  module will be called rtc-st-lpc.
1838
1839config RTC_DRV_MOXART
1840	tristate "MOXA ART RTC"
1841	depends on ARCH_MOXART || COMPILE_TEST
1842	help
1843	   If you say yes here you get support for the MOXA ART
1844	   RTC module.
1845
1846	   This driver can also be built as a module. If so, the module
1847	   will be called rtc-moxart
1848
1849config RTC_DRV_MT2712
1850	tristate "MediaTek MT2712 SoC based RTC"
1851	depends on ARCH_MEDIATEK || COMPILE_TEST
1852	help
1853	  This enables support for the real time clock built in the MediaTek
1854	  SoCs for MT2712.
1855
1856	  This drive can also be built as a module. If so, the module
1857	  will be called rtc-mt2712.
1858
1859config RTC_DRV_MT6397
1860	tristate "MediaTek PMIC based RTC"
1861	depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN)
1862	help
1863	  This selects the MediaTek(R) RTC driver. RTC is part of MediaTek
1864	  MT6397 PMIC. You should enable MT6397 PMIC MFD before select
1865	  MediaTek(R) RTC driver.
1866
1867	  If you want to use MediaTek(R) RTC interface, select Y or M here.
1868
1869config RTC_DRV_MT7622
1870	tristate "MediaTek SoC based RTC"
1871	depends on ARCH_MEDIATEK || COMPILE_TEST
1872	help
1873	  This enables support for the real time clock built in the MediaTek
1874	  SoCs.
1875
1876	  This drive can also be built as a module. If so, the module
1877	  will be called rtc-mt7622.
1878
1879config RTC_DRV_XGENE
1880	tristate "APM X-Gene RTC"
1881	depends on HAS_IOMEM
1882	depends on ARCH_XGENE || COMPILE_TEST
1883	help
1884	  If you say yes here you get support for the APM X-Gene SoC real time
1885	  clock.
1886
1887	  This driver can also be built as a module, if so, the module
1888	  will be called "rtc-xgene".
1889
1890config RTC_DRV_PIC32
1891	tristate "Microchip PIC32 RTC"
1892	depends on MACH_PIC32
1893	default y
1894	help
1895	   If you say yes here you get support for the PIC32 RTC module.
1896
1897	   This driver can also be built as a module. If so, the module
1898	   will be called rtc-pic32
1899
1900config RTC_DRV_R7301
1901	tristate "EPSON TOYOCOM RTC-7301SF/DG"
1902	select REGMAP_MMIO
1903	depends on OF && HAS_IOMEM
1904	help
1905	   If you say yes here you get support for the EPSON TOYOCOM
1906	   RTC-7301SF/DG chips.
1907
1908	   This driver can also be built as a module. If so, the module
1909	   will be called rtc-r7301.
1910
1911config RTC_DRV_STM32
1912	tristate "STM32 RTC"
1913	select REGMAP_MMIO
1914	depends on ARCH_STM32 || COMPILE_TEST
1915	help
1916	   If you say yes here you get support for the STM32 On-Chip
1917	   Real Time Clock.
1918
1919	   This driver can also be built as a module, if so, the module
1920	   will be called "rtc-stm32".
1921
1922config RTC_DRV_CPCAP
1923	depends on MFD_CPCAP
1924	tristate "Motorola CPCAP RTC"
1925	help
1926	   Say y here for CPCAP rtc found on some Motorola phones
1927	   and tablets such as Droid 4.
1928
1929config RTC_DRV_RTD119X
1930	bool "Realtek RTD129x RTC"
1931	depends on ARCH_REALTEK || COMPILE_TEST
1932	default ARCH_REALTEK
1933	help
1934	  If you say yes here, you get support for the RTD1295 SoC
1935	  Real Time Clock.
1936
1937config RTC_DRV_ASPEED
1938	tristate "ASPEED RTC"
1939	depends on OF
1940	depends on ARCH_ASPEED || COMPILE_TEST
1941	help
1942	  If you say yes here you get support for the ASPEED BMC SoC real time
1943	  clocks.
1944
1945	  This driver can also be built as a module, if so, the module
1946	  will be called "rtc-aspeed".
1947
1948config RTC_DRV_TI_K3
1949	tristate "TI K3 RTC"
1950	depends on ARCH_K3 || COMPILE_TEST
1951	select REGMAP_MMIO
1952	help
1953	  If you say yes here you get support for the Texas Instruments's
1954	  Real Time Clock for K3 architecture.
1955
1956	  This driver can also be built as a module, if so, the module
1957	  will be called "rtc-ti-k3".
1958
1959config RTC_DRV_MA35D1
1960	tristate "Nuvoton MA35D1 RTC"
1961	depends on ARCH_MA35 || COMPILE_TEST
1962	select REGMAP_MMIO
1963	help
1964	   If you say yes here you get support for the Nuvoton MA35D1
1965	   On-Chip Real Time Clock.
1966
1967	   This driver can also be built as a module, if so, the module
1968	   will be called "rtc-ma35d1".
1969
1970comment "HID Sensor RTC drivers"
1971
1972config RTC_DRV_HID_SENSOR_TIME
1973	tristate "HID Sensor Time"
1974	depends on USB_HID
1975	depends on HID_SENSOR_HUB && IIO
1976	select HID_SENSOR_IIO_COMMON
1977	help
1978	  Say yes here to build support for the HID Sensors of type Time.
1979	  This drivers makes such sensors available as RTCs.
1980
1981	  If this driver is compiled as a module, it will be named
1982	  rtc-hid-sensor-time.
1983
1984config RTC_DRV_GOLDFISH
1985	tristate "Goldfish Real Time Clock"
1986	depends on HAS_IOMEM
1987	help
1988	  Say yes to enable RTC driver for the Goldfish based virtual platform.
1989
1990	  Goldfish is a code name for the virtual platform developed by Google
1991	  for Android emulation.
1992
1993config RTC_DRV_WILCO_EC
1994	tristate "Wilco EC RTC"
1995	depends on WILCO_EC
1996	default m
1997	help
1998	  If you say yes here, you get read/write support for the Real Time
1999	  Clock on the Wilco Embedded Controller (Wilco is a kind of Chromebook)
2000
2001	  This can also be built as a module. If so, the module will
2002	  be named "rtc_wilco_ec".
2003
2004config RTC_DRV_MSC313
2005	tristate "MStar MSC313 RTC"
2006        depends on ARCH_MSTARV7 || COMPILE_TEST
2007	help
2008	  If you say yes here you get support for the Mstar MSC313e On-Chip
2009	  Real Time Clock.
2010
2011	  This driver can also be built as a module, if so, the module
2012	  will be called "rtc-msc313".
2013
2014config RTC_DRV_POLARFIRE_SOC
2015	tristate "Microchip PolarFire SoC built-in RTC"
2016	depends on ARCH_MICROCHIP_POLARFIRE
2017	help
2018	  If you say yes here you will get support for the
2019	  built-in RTC on Polarfire SoC.
2020
2021	  This driver can also be built as a module, if so, the module
2022	  will be called "rtc-mpfs".
2023
2024config RTC_DRV_SSD202D
2025	tristate "SigmaStar SSD202D RTC"
2026	depends on ARCH_MSTARV7 || COMPILE_TEST
2027	default ARCH_MSTARV7
2028	help
2029	  If you say yes here you get support for the SigmaStar SSD202D On-Chip
2030	  Real Time Clock.
2031
2032	  This driver can also be built as a module, if so, the module
2033	  will be called "rtc-ssd20xd".
2034
2035endif # RTC_CLASS