Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (c) 2014, The Linux Foundation. All rights reserved.
4 */
5
6#include <linux/io.h>
7#include <linux/kernel.h>
8#include <linux/module.h>
9#include <linux/of.h>
10#include <linux/of_address.h>
11#include <linux/time.h>
12#include <linux/delay.h>
13#include <linux/clk.h>
14#include <linux/slab.h>
15#include <linux/platform_device.h>
16#include <linux/phy/phy.h>
17
18struct qcom_ipq806x_sata_phy {
19 void __iomem *mmio;
20 struct clk *cfg_clk;
21 struct device *dev;
22};
23
24#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b))
25
26#define SATA_PHY_P0_PARAM0 0x200
27#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(x) __set(x, 17, 12)
28#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK GENMASK(17, 12)
29#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2(x) __set(x, 11, 6)
30#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK GENMASK(11, 6)
31#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1(x) __set(x, 5, 0)
32#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK GENMASK(5, 0)
33
34#define SATA_PHY_P0_PARAM1 0x204
35#define SATA_PHY_P0_PARAM1_RESERVED_BITS31_21(x) __set(x, 31, 21)
36#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(x) __set(x, 20, 14)
37#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK GENMASK(20, 14)
38#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(x) __set(x, 13, 7)
39#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK GENMASK(13, 7)
40#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(x) __set(x, 6, 0)
41#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK GENMASK(6, 0)
42
43#define SATA_PHY_P0_PARAM2 0x208
44#define SATA_PHY_P0_PARAM2_RX_EQ(x) __set(x, 20, 18)
45#define SATA_PHY_P0_PARAM2_RX_EQ_MASK GENMASK(20, 18)
46
47#define SATA_PHY_P0_PARAM3 0x20C
48#define SATA_PHY_SSC_EN 0x8
49#define SATA_PHY_P0_PARAM4 0x210
50#define SATA_PHY_REF_SSP_EN 0x2
51#define SATA_PHY_RESET 0x1
52
53static int qcom_ipq806x_sata_phy_init(struct phy *generic_phy)
54{
55 struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy);
56 u32 reg;
57
58 /* Setting SSC_EN to 1 */
59 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM3);
60 reg = reg | SATA_PHY_SSC_EN;
61 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM3);
62
63 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM0) &
64 ~(SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK |
65 SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK |
66 SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK);
67 reg |= SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(0xf);
68 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM0);
69
70 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM1) &
71 ~(SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK |
72 SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK |
73 SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK);
74 reg |= SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(0x55) |
75 SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(0x55) |
76 SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(0x55);
77 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM1);
78
79 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM2) &
80 ~SATA_PHY_P0_PARAM2_RX_EQ_MASK;
81 reg |= SATA_PHY_P0_PARAM2_RX_EQ(0x3);
82 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM2);
83
84 /* Setting PHY_RESET to 1 */
85 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
86 reg = reg | SATA_PHY_RESET;
87 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
88
89 /* Setting REF_SSP_EN to 1 */
90 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
91 reg = reg | SATA_PHY_REF_SSP_EN | SATA_PHY_RESET;
92 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
93
94 /* make sure all changes complete before we let the PHY out of reset */
95 mb();
96
97 /* sleep for max. 50us more to combine processor wakeups */
98 usleep_range(20, 20 + 50);
99
100 /* Clearing PHY_RESET to 0 */
101 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
102 reg = reg & ~SATA_PHY_RESET;
103 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
104
105 return 0;
106}
107
108static int qcom_ipq806x_sata_phy_exit(struct phy *generic_phy)
109{
110 struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy);
111 u32 reg;
112
113 /* Setting PHY_RESET to 1 */
114 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
115 reg = reg | SATA_PHY_RESET;
116 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
117
118 return 0;
119}
120
121static const struct phy_ops qcom_ipq806x_sata_phy_ops = {
122 .init = qcom_ipq806x_sata_phy_init,
123 .exit = qcom_ipq806x_sata_phy_exit,
124 .owner = THIS_MODULE,
125};
126
127static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev)
128{
129 struct qcom_ipq806x_sata_phy *phy;
130 struct device *dev = &pdev->dev;
131 struct phy_provider *phy_provider;
132 struct phy *generic_phy;
133 int ret;
134
135 phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
136 if (!phy)
137 return -ENOMEM;
138
139 phy->mmio = devm_platform_ioremap_resource(pdev, 0);
140 if (IS_ERR(phy->mmio))
141 return PTR_ERR(phy->mmio);
142
143 generic_phy = devm_phy_create(dev, NULL, &qcom_ipq806x_sata_phy_ops);
144 if (IS_ERR(generic_phy)) {
145 dev_err(dev, "%s: failed to create phy\n", __func__);
146 return PTR_ERR(generic_phy);
147 }
148
149 phy->dev = dev;
150 phy_set_drvdata(generic_phy, phy);
151 platform_set_drvdata(pdev, phy);
152
153 phy->cfg_clk = devm_clk_get(dev, "cfg");
154 if (IS_ERR(phy->cfg_clk)) {
155 dev_err(dev, "Failed to get sata cfg clock\n");
156 return PTR_ERR(phy->cfg_clk);
157 }
158
159 ret = clk_prepare_enable(phy->cfg_clk);
160 if (ret)
161 return ret;
162
163 phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
164 if (IS_ERR(phy_provider)) {
165 clk_disable_unprepare(phy->cfg_clk);
166 dev_err(dev, "%s: failed to register phy\n", __func__);
167 return PTR_ERR(phy_provider);
168 }
169
170 return 0;
171}
172
173static void qcom_ipq806x_sata_phy_remove(struct platform_device *pdev)
174{
175 struct qcom_ipq806x_sata_phy *phy = platform_get_drvdata(pdev);
176
177 clk_disable_unprepare(phy->cfg_clk);
178}
179
180static const struct of_device_id qcom_ipq806x_sata_phy_of_match[] = {
181 { .compatible = "qcom,ipq806x-sata-phy" },
182 { },
183};
184MODULE_DEVICE_TABLE(of, qcom_ipq806x_sata_phy_of_match);
185
186static struct platform_driver qcom_ipq806x_sata_phy_driver = {
187 .probe = qcom_ipq806x_sata_phy_probe,
188 .remove_new = qcom_ipq806x_sata_phy_remove,
189 .driver = {
190 .name = "qcom-ipq806x-sata-phy",
191 .of_match_table = qcom_ipq806x_sata_phy_of_match,
192 }
193};
194module_platform_driver(qcom_ipq806x_sata_phy_driver);
195
196MODULE_DESCRIPTION("QCOM IPQ806x SATA PHY driver");
197MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (c) 2014, The Linux Foundation. All rights reserved.
4 */
5
6#include <linux/io.h>
7#include <linux/kernel.h>
8#include <linux/module.h>
9#include <linux/of.h>
10#include <linux/of_address.h>
11#include <linux/time.h>
12#include <linux/delay.h>
13#include <linux/clk.h>
14#include <linux/slab.h>
15#include <linux/platform_device.h>
16#include <linux/phy/phy.h>
17
18struct qcom_ipq806x_sata_phy {
19 void __iomem *mmio;
20 struct clk *cfg_clk;
21 struct device *dev;
22};
23
24#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b))
25
26#define SATA_PHY_P0_PARAM0 0x200
27#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(x) __set(x, 17, 12)
28#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK GENMASK(17, 12)
29#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2(x) __set(x, 11, 6)
30#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK GENMASK(11, 6)
31#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1(x) __set(x, 5, 0)
32#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK GENMASK(5, 0)
33
34#define SATA_PHY_P0_PARAM1 0x204
35#define SATA_PHY_P0_PARAM1_RESERVED_BITS31_21(x) __set(x, 31, 21)
36#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(x) __set(x, 20, 14)
37#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK GENMASK(20, 14)
38#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(x) __set(x, 13, 7)
39#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK GENMASK(13, 7)
40#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(x) __set(x, 6, 0)
41#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK GENMASK(6, 0)
42
43#define SATA_PHY_P0_PARAM2 0x208
44#define SATA_PHY_P0_PARAM2_RX_EQ(x) __set(x, 20, 18)
45#define SATA_PHY_P0_PARAM2_RX_EQ_MASK GENMASK(20, 18)
46
47#define SATA_PHY_P0_PARAM3 0x20C
48#define SATA_PHY_SSC_EN 0x8
49#define SATA_PHY_P0_PARAM4 0x210
50#define SATA_PHY_REF_SSP_EN 0x2
51#define SATA_PHY_RESET 0x1
52
53static int qcom_ipq806x_sata_phy_init(struct phy *generic_phy)
54{
55 struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy);
56 u32 reg;
57
58 /* Setting SSC_EN to 1 */
59 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM3);
60 reg = reg | SATA_PHY_SSC_EN;
61 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM3);
62
63 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM0) &
64 ~(SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK |
65 SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK |
66 SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK);
67 reg |= SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(0xf);
68 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM0);
69
70 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM1) &
71 ~(SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK |
72 SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK |
73 SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK);
74 reg |= SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(0x55) |
75 SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(0x55) |
76 SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(0x55);
77 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM1);
78
79 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM2) &
80 ~SATA_PHY_P0_PARAM2_RX_EQ_MASK;
81 reg |= SATA_PHY_P0_PARAM2_RX_EQ(0x3);
82 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM2);
83
84 /* Setting PHY_RESET to 1 */
85 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
86 reg = reg | SATA_PHY_RESET;
87 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
88
89 /* Setting REF_SSP_EN to 1 */
90 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
91 reg = reg | SATA_PHY_REF_SSP_EN | SATA_PHY_RESET;
92 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
93
94 /* make sure all changes complete before we let the PHY out of reset */
95 mb();
96
97 /* sleep for max. 50us more to combine processor wakeups */
98 usleep_range(20, 20 + 50);
99
100 /* Clearing PHY_RESET to 0 */
101 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
102 reg = reg & ~SATA_PHY_RESET;
103 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
104
105 return 0;
106}
107
108static int qcom_ipq806x_sata_phy_exit(struct phy *generic_phy)
109{
110 struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy);
111 u32 reg;
112
113 /* Setting PHY_RESET to 1 */
114 reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4);
115 reg = reg | SATA_PHY_RESET;
116 writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4);
117
118 return 0;
119}
120
121static const struct phy_ops qcom_ipq806x_sata_phy_ops = {
122 .init = qcom_ipq806x_sata_phy_init,
123 .exit = qcom_ipq806x_sata_phy_exit,
124 .owner = THIS_MODULE,
125};
126
127static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev)
128{
129 struct qcom_ipq806x_sata_phy *phy;
130 struct device *dev = &pdev->dev;
131 struct phy_provider *phy_provider;
132 struct phy *generic_phy;
133 int ret;
134
135 phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
136 if (!phy)
137 return -ENOMEM;
138
139 phy->mmio = devm_platform_ioremap_resource(pdev, 0);
140 if (IS_ERR(phy->mmio))
141 return PTR_ERR(phy->mmio);
142
143 generic_phy = devm_phy_create(dev, NULL, &qcom_ipq806x_sata_phy_ops);
144 if (IS_ERR(generic_phy)) {
145 dev_err(dev, "%s: failed to create phy\n", __func__);
146 return PTR_ERR(generic_phy);
147 }
148
149 phy->dev = dev;
150 phy_set_drvdata(generic_phy, phy);
151 platform_set_drvdata(pdev, phy);
152
153 phy->cfg_clk = devm_clk_get(dev, "cfg");
154 if (IS_ERR(phy->cfg_clk)) {
155 dev_err(dev, "Failed to get sata cfg clock\n");
156 return PTR_ERR(phy->cfg_clk);
157 }
158
159 ret = clk_prepare_enable(phy->cfg_clk);
160 if (ret)
161 return ret;
162
163 phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
164 if (IS_ERR(phy_provider)) {
165 clk_disable_unprepare(phy->cfg_clk);
166 dev_err(dev, "%s: failed to register phy\n", __func__);
167 return PTR_ERR(phy_provider);
168 }
169
170 return 0;
171}
172
173static int qcom_ipq806x_sata_phy_remove(struct platform_device *pdev)
174{
175 struct qcom_ipq806x_sata_phy *phy = platform_get_drvdata(pdev);
176
177 clk_disable_unprepare(phy->cfg_clk);
178
179 return 0;
180}
181
182static const struct of_device_id qcom_ipq806x_sata_phy_of_match[] = {
183 { .compatible = "qcom,ipq806x-sata-phy" },
184 { },
185};
186MODULE_DEVICE_TABLE(of, qcom_ipq806x_sata_phy_of_match);
187
188static struct platform_driver qcom_ipq806x_sata_phy_driver = {
189 .probe = qcom_ipq806x_sata_phy_probe,
190 .remove = qcom_ipq806x_sata_phy_remove,
191 .driver = {
192 .name = "qcom-ipq806x-sata-phy",
193 .of_match_table = qcom_ipq806x_sata_phy_of_match,
194 }
195};
196module_platform_driver(qcom_ipq806x_sata_phy_driver);
197
198MODULE_DESCRIPTION("QCOM IPQ806x SATA PHY driver");
199MODULE_LICENSE("GPL v2");