Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Driver for USB ethernet port of Conexant CX82310-based ADSL routers
4 * Copyright (C) 2010 by Ondrej Zary
5 * some parts inspired by the cxacru driver
6 */
7
8#include <linux/module.h>
9#include <linux/netdevice.h>
10#include <linux/etherdevice.h>
11#include <linux/ethtool.h>
12#include <linux/workqueue.h>
13#include <linux/mii.h>
14#include <linux/usb.h>
15#include <linux/usb/usbnet.h>
16
17enum cx82310_cmd {
18 CMD_START = 0x84, /* no effect? */
19 CMD_STOP = 0x85, /* no effect? */
20 CMD_GET_STATUS = 0x90, /* returns nothing? */
21 CMD_GET_MAC_ADDR = 0x91, /* read MAC address */
22 CMD_GET_LINK_STATUS = 0x92, /* not useful, link is always up */
23 CMD_ETHERNET_MODE = 0x99, /* unknown, needed during init */
24};
25
26enum cx82310_status {
27 STATUS_UNDEFINED,
28 STATUS_SUCCESS,
29 STATUS_ERROR,
30 STATUS_UNSUPPORTED,
31 STATUS_UNIMPLEMENTED,
32 STATUS_PARAMETER_ERROR,
33 STATUS_DBG_LOOPBACK,
34};
35
36#define CMD_PACKET_SIZE 64
37#define CMD_TIMEOUT 100
38#define CMD_REPLY_RETRY 5
39
40#define CX82310_MTU 1514
41#define CMD_EP 0x01
42
43struct cx82310_priv {
44 struct work_struct reenable_work;
45 struct usbnet *dev;
46};
47
48/*
49 * execute control command
50 * - optionally send some data (command parameters)
51 * - optionally wait for the reply
52 * - optionally read some data from the reply
53 */
54static int cx82310_cmd(struct usbnet *dev, enum cx82310_cmd cmd, bool reply,
55 u8 *wdata, int wlen, u8 *rdata, int rlen)
56{
57 int actual_len, retries, ret;
58 struct usb_device *udev = dev->udev;
59 u8 *buf = kzalloc(CMD_PACKET_SIZE, GFP_KERNEL);
60
61 if (!buf)
62 return -ENOMEM;
63
64 /* create command packet */
65 buf[0] = cmd;
66 if (wdata)
67 memcpy(buf + 4, wdata, min_t(int, wlen, CMD_PACKET_SIZE - 4));
68
69 /* send command packet */
70 ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, CMD_EP), buf,
71 CMD_PACKET_SIZE, &actual_len, CMD_TIMEOUT);
72 if (ret < 0) {
73 if (cmd != CMD_GET_LINK_STATUS)
74 netdev_err(dev->net, "send command %#x: error %d\n",
75 cmd, ret);
76 goto end;
77 }
78
79 if (reply) {
80 /* wait for reply, retry if it's empty */
81 for (retries = 0; retries < CMD_REPLY_RETRY; retries++) {
82 ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, CMD_EP),
83 buf, CMD_PACKET_SIZE, &actual_len,
84 CMD_TIMEOUT);
85 if (ret < 0) {
86 if (cmd != CMD_GET_LINK_STATUS)
87 netdev_err(dev->net, "reply receive error %d\n",
88 ret);
89 goto end;
90 }
91 if (actual_len > 0)
92 break;
93 }
94 if (actual_len == 0) {
95 netdev_err(dev->net, "no reply to command %#x\n", cmd);
96 ret = -EIO;
97 goto end;
98 }
99 if (buf[0] != cmd) {
100 netdev_err(dev->net, "got reply to command %#x, expected: %#x\n",
101 buf[0], cmd);
102 ret = -EIO;
103 goto end;
104 }
105 if (buf[1] != STATUS_SUCCESS) {
106 netdev_err(dev->net, "command %#x failed: %#x\n", cmd,
107 buf[1]);
108 ret = -EIO;
109 goto end;
110 }
111 if (rdata)
112 memcpy(rdata, buf + 4,
113 min_t(int, rlen, CMD_PACKET_SIZE - 4));
114 }
115end:
116 kfree(buf);
117 return ret;
118}
119
120static int cx82310_enable_ethernet(struct usbnet *dev)
121{
122 int ret = cx82310_cmd(dev, CMD_ETHERNET_MODE, true, "\x01", 1, NULL, 0);
123
124 if (ret)
125 netdev_err(dev->net, "unable to enable ethernet mode: %d\n",
126 ret);
127 return ret;
128}
129
130static void cx82310_reenable_work(struct work_struct *work)
131{
132 struct cx82310_priv *priv = container_of(work, struct cx82310_priv,
133 reenable_work);
134 cx82310_enable_ethernet(priv->dev);
135}
136
137#define partial_len data[0] /* length of partial packet data */
138#define partial_rem data[1] /* remaining (missing) data length */
139#define partial_data data[2] /* partial packet data */
140
141static int cx82310_bind(struct usbnet *dev, struct usb_interface *intf)
142{
143 int ret;
144 char buf[15];
145 struct usb_device *udev = dev->udev;
146 u8 link[3];
147 int timeout = 50;
148 struct cx82310_priv *priv;
149 u8 addr[ETH_ALEN];
150
151 /* avoid ADSL modems - continue only if iProduct is "USB NET CARD" */
152 if (usb_string(udev, udev->descriptor.iProduct, buf, sizeof(buf)) > 0
153 && strcmp(buf, "USB NET CARD")) {
154 dev_info(&udev->dev, "ignoring: probably an ADSL modem\n");
155 return -ENODEV;
156 }
157
158 ret = usbnet_get_endpoints(dev, intf);
159 if (ret)
160 return ret;
161
162 /*
163 * this must not include ethernet header as the device can send partial
164 * packets with no header (and sometimes even empty URBs)
165 */
166 dev->net->hard_header_len = 0;
167 /* we can send at most 1514 bytes of data (+ 2-byte header) per URB */
168 dev->hard_mtu = CX82310_MTU + 2;
169 /* we can receive URBs up to 4KB from the device */
170 dev->rx_urb_size = 4096;
171
172 dev->partial_data = (unsigned long) kmalloc(dev->hard_mtu, GFP_KERNEL);
173 if (!dev->partial_data)
174 return -ENOMEM;
175
176 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
177 if (!priv) {
178 ret = -ENOMEM;
179 goto err_partial;
180 }
181 dev->driver_priv = priv;
182 INIT_WORK(&priv->reenable_work, cx82310_reenable_work);
183 priv->dev = dev;
184
185 /* wait for firmware to become ready (indicated by the link being up) */
186 while (--timeout) {
187 ret = cx82310_cmd(dev, CMD_GET_LINK_STATUS, true, NULL, 0,
188 link, sizeof(link));
189 /* the command can time out during boot - it's not an error */
190 if (!ret && link[0] == 1 && link[2] == 1)
191 break;
192 msleep(500);
193 }
194 if (!timeout) {
195 netdev_err(dev->net, "firmware not ready in time\n");
196 ret = -ETIMEDOUT;
197 goto err;
198 }
199
200 /* enable ethernet mode (?) */
201 ret = cx82310_enable_ethernet(dev);
202 if (ret)
203 goto err;
204
205 /* get the MAC address */
206 ret = cx82310_cmd(dev, CMD_GET_MAC_ADDR, true, NULL, 0, addr, ETH_ALEN);
207 if (ret) {
208 netdev_err(dev->net, "unable to read MAC address: %d\n", ret);
209 goto err;
210 }
211 eth_hw_addr_set(dev->net, addr);
212
213 /* start (does not seem to have any effect?) */
214 ret = cx82310_cmd(dev, CMD_START, false, NULL, 0, NULL, 0);
215 if (ret)
216 goto err;
217
218 return 0;
219err:
220 kfree(dev->driver_priv);
221err_partial:
222 kfree((void *)dev->partial_data);
223 return ret;
224}
225
226static void cx82310_unbind(struct usbnet *dev, struct usb_interface *intf)
227{
228 struct cx82310_priv *priv = dev->driver_priv;
229
230 kfree((void *)dev->partial_data);
231 cancel_work_sync(&priv->reenable_work);
232 kfree(dev->driver_priv);
233}
234
235/*
236 * RX is NOT easy - we can receive multiple packets per skb, each having 2-byte
237 * packet length at the beginning.
238 * The last packet might be incomplete (when it crosses the 4KB URB size),
239 * continuing in the next skb (without any headers).
240 * If a packet has odd length, there is one extra byte at the end (before next
241 * packet or at the end of the URB).
242 */
243static int cx82310_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
244{
245 int len;
246 struct sk_buff *skb2;
247 struct cx82310_priv *priv = dev->driver_priv;
248
249 /*
250 * If the last skb ended with an incomplete packet, this skb contains
251 * end of that packet at the beginning.
252 */
253 if (dev->partial_rem) {
254 len = dev->partial_len + dev->partial_rem;
255 skb2 = alloc_skb(len, GFP_ATOMIC);
256 if (!skb2)
257 return 0;
258 skb_put(skb2, len);
259 memcpy(skb2->data, (void *)dev->partial_data,
260 dev->partial_len);
261 memcpy(skb2->data + dev->partial_len, skb->data,
262 dev->partial_rem);
263 usbnet_skb_return(dev, skb2);
264 skb_pull(skb, (dev->partial_rem + 1) & ~1);
265 dev->partial_rem = 0;
266 if (skb->len < 2)
267 return 1;
268 }
269
270 /* a skb can contain multiple packets */
271 while (skb->len > 1) {
272 /* first two bytes are packet length */
273 len = skb->data[0] | (skb->data[1] << 8);
274 skb_pull(skb, 2);
275
276 /* if last packet in the skb, let usbnet to process it */
277 if (len == skb->len || len + 1 == skb->len) {
278 skb_trim(skb, len);
279 break;
280 }
281
282 if (len == 0xffff) {
283 netdev_info(dev->net, "router was rebooted, re-enabling ethernet mode");
284 schedule_work(&priv->reenable_work);
285 } else if (len > CX82310_MTU) {
286 netdev_err(dev->net, "RX packet too long: %d B\n", len);
287 return 0;
288 }
289
290 /* incomplete packet, save it for the next skb */
291 if (len > skb->len) {
292 dev->partial_len = skb->len;
293 dev->partial_rem = len - skb->len;
294 memcpy((void *)dev->partial_data, skb->data,
295 dev->partial_len);
296 skb_pull(skb, skb->len);
297 break;
298 }
299
300 skb2 = alloc_skb(len, GFP_ATOMIC);
301 if (!skb2)
302 return 0;
303 skb_put(skb2, len);
304 memcpy(skb2->data, skb->data, len);
305 /* process the packet */
306 usbnet_skb_return(dev, skb2);
307
308 skb_pull(skb, (len + 1) & ~1);
309 }
310
311 /* let usbnet process the last packet */
312 return 1;
313}
314
315/* TX is easy, just add 2 bytes of length at the beginning */
316static struct sk_buff *cx82310_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
317 gfp_t flags)
318{
319 int len = skb->len;
320
321 if (skb_cow_head(skb, 2)) {
322 dev_kfree_skb_any(skb);
323 return NULL;
324 }
325 skb_push(skb, 2);
326
327 skb->data[0] = len;
328 skb->data[1] = len >> 8;
329
330 return skb;
331}
332
333
334static const struct driver_info cx82310_info = {
335 .description = "Conexant CX82310 USB ethernet",
336 .flags = FLAG_ETHER,
337 .bind = cx82310_bind,
338 .unbind = cx82310_unbind,
339 .rx_fixup = cx82310_rx_fixup,
340 .tx_fixup = cx82310_tx_fixup,
341};
342
343#define USB_DEVICE_CLASS(vend, prod, cl, sc, pr) \
344 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
345 USB_DEVICE_ID_MATCH_DEV_INFO, \
346 .idVendor = (vend), \
347 .idProduct = (prod), \
348 .bDeviceClass = (cl), \
349 .bDeviceSubClass = (sc), \
350 .bDeviceProtocol = (pr)
351
352static const struct usb_device_id products[] = {
353 {
354 USB_DEVICE_CLASS(0x0572, 0xcb01, 0xff, 0, 0),
355 .driver_info = (unsigned long) &cx82310_info
356 },
357 { },
358};
359MODULE_DEVICE_TABLE(usb, products);
360
361static struct usb_driver cx82310_driver = {
362 .name = "cx82310_eth",
363 .id_table = products,
364 .probe = usbnet_probe,
365 .disconnect = usbnet_disconnect,
366 .suspend = usbnet_suspend,
367 .resume = usbnet_resume,
368 .disable_hub_initiated_lpm = 1,
369};
370
371module_usb_driver(cx82310_driver);
372
373MODULE_AUTHOR("Ondrej Zary");
374MODULE_DESCRIPTION("Conexant CX82310-based ADSL router USB ethernet driver");
375MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Driver for USB ethernet port of Conexant CX82310-based ADSL routers
4 * Copyright (C) 2010 by Ondrej Zary
5 * some parts inspired by the cxacru driver
6 */
7
8#include <linux/module.h>
9#include <linux/netdevice.h>
10#include <linux/etherdevice.h>
11#include <linux/ethtool.h>
12#include <linux/workqueue.h>
13#include <linux/mii.h>
14#include <linux/usb.h>
15#include <linux/usb/usbnet.h>
16
17enum cx82310_cmd {
18 CMD_START = 0x84, /* no effect? */
19 CMD_STOP = 0x85, /* no effect? */
20 CMD_GET_STATUS = 0x90, /* returns nothing? */
21 CMD_GET_MAC_ADDR = 0x91, /* read MAC address */
22 CMD_GET_LINK_STATUS = 0x92, /* not useful, link is always up */
23 CMD_ETHERNET_MODE = 0x99, /* unknown, needed during init */
24};
25
26enum cx82310_status {
27 STATUS_UNDEFINED,
28 STATUS_SUCCESS,
29 STATUS_ERROR,
30 STATUS_UNSUPPORTED,
31 STATUS_UNIMPLEMENTED,
32 STATUS_PARAMETER_ERROR,
33 STATUS_DBG_LOOPBACK,
34};
35
36#define CMD_PACKET_SIZE 64
37#define CMD_TIMEOUT 100
38#define CMD_REPLY_RETRY 5
39
40#define CX82310_MTU 1514
41#define CMD_EP 0x01
42
43struct cx82310_priv {
44 struct work_struct reenable_work;
45 struct usbnet *dev;
46};
47
48/*
49 * execute control command
50 * - optionally send some data (command parameters)
51 * - optionally wait for the reply
52 * - optionally read some data from the reply
53 */
54static int cx82310_cmd(struct usbnet *dev, enum cx82310_cmd cmd, bool reply,
55 u8 *wdata, int wlen, u8 *rdata, int rlen)
56{
57 int actual_len, retries, ret;
58 struct usb_device *udev = dev->udev;
59 u8 *buf = kzalloc(CMD_PACKET_SIZE, GFP_KERNEL);
60
61 if (!buf)
62 return -ENOMEM;
63
64 /* create command packet */
65 buf[0] = cmd;
66 if (wdata)
67 memcpy(buf + 4, wdata, min_t(int, wlen, CMD_PACKET_SIZE - 4));
68
69 /* send command packet */
70 ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, CMD_EP), buf,
71 CMD_PACKET_SIZE, &actual_len, CMD_TIMEOUT);
72 if (ret < 0) {
73 if (cmd != CMD_GET_LINK_STATUS)
74 netdev_err(dev->net, "send command %#x: error %d\n",
75 cmd, ret);
76 goto end;
77 }
78
79 if (reply) {
80 /* wait for reply, retry if it's empty */
81 for (retries = 0; retries < CMD_REPLY_RETRY; retries++) {
82 ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, CMD_EP),
83 buf, CMD_PACKET_SIZE, &actual_len,
84 CMD_TIMEOUT);
85 if (ret < 0) {
86 if (cmd != CMD_GET_LINK_STATUS)
87 netdev_err(dev->net, "reply receive error %d\n",
88 ret);
89 goto end;
90 }
91 if (actual_len > 0)
92 break;
93 }
94 if (actual_len == 0) {
95 netdev_err(dev->net, "no reply to command %#x\n", cmd);
96 ret = -EIO;
97 goto end;
98 }
99 if (buf[0] != cmd) {
100 netdev_err(dev->net, "got reply to command %#x, expected: %#x\n",
101 buf[0], cmd);
102 ret = -EIO;
103 goto end;
104 }
105 if (buf[1] != STATUS_SUCCESS) {
106 netdev_err(dev->net, "command %#x failed: %#x\n", cmd,
107 buf[1]);
108 ret = -EIO;
109 goto end;
110 }
111 if (rdata)
112 memcpy(rdata, buf + 4,
113 min_t(int, rlen, CMD_PACKET_SIZE - 4));
114 }
115end:
116 kfree(buf);
117 return ret;
118}
119
120static int cx82310_enable_ethernet(struct usbnet *dev)
121{
122 int ret = cx82310_cmd(dev, CMD_ETHERNET_MODE, true, "\x01", 1, NULL, 0);
123
124 if (ret)
125 netdev_err(dev->net, "unable to enable ethernet mode: %d\n",
126 ret);
127 return ret;
128}
129
130static void cx82310_reenable_work(struct work_struct *work)
131{
132 struct cx82310_priv *priv = container_of(work, struct cx82310_priv,
133 reenable_work);
134 cx82310_enable_ethernet(priv->dev);
135}
136
137#define partial_len data[0] /* length of partial packet data */
138#define partial_rem data[1] /* remaining (missing) data length */
139#define partial_data data[2] /* partial packet data */
140
141static int cx82310_bind(struct usbnet *dev, struct usb_interface *intf)
142{
143 int ret;
144 char buf[15];
145 struct usb_device *udev = dev->udev;
146 u8 link[3];
147 int timeout = 50;
148 struct cx82310_priv *priv;
149
150 /* avoid ADSL modems - continue only if iProduct is "USB NET CARD" */
151 if (usb_string(udev, udev->descriptor.iProduct, buf, sizeof(buf)) > 0
152 && strcmp(buf, "USB NET CARD")) {
153 dev_info(&udev->dev, "ignoring: probably an ADSL modem\n");
154 return -ENODEV;
155 }
156
157 ret = usbnet_get_endpoints(dev, intf);
158 if (ret)
159 return ret;
160
161 /*
162 * this must not include ethernet header as the device can send partial
163 * packets with no header (and sometimes even empty URBs)
164 */
165 dev->net->hard_header_len = 0;
166 /* we can send at most 1514 bytes of data (+ 2-byte header) per URB */
167 dev->hard_mtu = CX82310_MTU + 2;
168 /* we can receive URBs up to 4KB from the device */
169 dev->rx_urb_size = 4096;
170
171 dev->partial_data = (unsigned long) kmalloc(dev->hard_mtu, GFP_KERNEL);
172 if (!dev->partial_data)
173 return -ENOMEM;
174
175 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
176 if (!priv) {
177 ret = -ENOMEM;
178 goto err_partial;
179 }
180 dev->driver_priv = priv;
181 INIT_WORK(&priv->reenable_work, cx82310_reenable_work);
182 priv->dev = dev;
183
184 /* wait for firmware to become ready (indicated by the link being up) */
185 while (--timeout) {
186 ret = cx82310_cmd(dev, CMD_GET_LINK_STATUS, true, NULL, 0,
187 link, sizeof(link));
188 /* the command can time out during boot - it's not an error */
189 if (!ret && link[0] == 1 && link[2] == 1)
190 break;
191 msleep(500);
192 }
193 if (!timeout) {
194 netdev_err(dev->net, "firmware not ready in time\n");
195 ret = -ETIMEDOUT;
196 goto err;
197 }
198
199 /* enable ethernet mode (?) */
200 ret = cx82310_enable_ethernet(dev);
201 if (ret)
202 goto err;
203
204 /* get the MAC address */
205 ret = cx82310_cmd(dev, CMD_GET_MAC_ADDR, true, NULL, 0,
206 dev->net->dev_addr, ETH_ALEN);
207 if (ret) {
208 netdev_err(dev->net, "unable to read MAC address: %d\n", ret);
209 goto err;
210 }
211
212 /* start (does not seem to have any effect?) */
213 ret = cx82310_cmd(dev, CMD_START, false, NULL, 0, NULL, 0);
214 if (ret)
215 goto err;
216
217 return 0;
218err:
219 kfree(dev->driver_priv);
220err_partial:
221 kfree((void *)dev->partial_data);
222 return ret;
223}
224
225static void cx82310_unbind(struct usbnet *dev, struct usb_interface *intf)
226{
227 struct cx82310_priv *priv = dev->driver_priv;
228
229 kfree((void *)dev->partial_data);
230 cancel_work_sync(&priv->reenable_work);
231 kfree(dev->driver_priv);
232}
233
234/*
235 * RX is NOT easy - we can receive multiple packets per skb, each having 2-byte
236 * packet length at the beginning.
237 * The last packet might be incomplete (when it crosses the 4KB URB size),
238 * continuing in the next skb (without any headers).
239 * If a packet has odd length, there is one extra byte at the end (before next
240 * packet or at the end of the URB).
241 */
242static int cx82310_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
243{
244 int len;
245 struct sk_buff *skb2;
246 struct cx82310_priv *priv = dev->driver_priv;
247
248 /*
249 * If the last skb ended with an incomplete packet, this skb contains
250 * end of that packet at the beginning.
251 */
252 if (dev->partial_rem) {
253 len = dev->partial_len + dev->partial_rem;
254 skb2 = alloc_skb(len, GFP_ATOMIC);
255 if (!skb2)
256 return 0;
257 skb_put(skb2, len);
258 memcpy(skb2->data, (void *)dev->partial_data,
259 dev->partial_len);
260 memcpy(skb2->data + dev->partial_len, skb->data,
261 dev->partial_rem);
262 usbnet_skb_return(dev, skb2);
263 skb_pull(skb, (dev->partial_rem + 1) & ~1);
264 dev->partial_rem = 0;
265 if (skb->len < 2)
266 return 1;
267 }
268
269 /* a skb can contain multiple packets */
270 while (skb->len > 1) {
271 /* first two bytes are packet length */
272 len = skb->data[0] | (skb->data[1] << 8);
273 skb_pull(skb, 2);
274
275 /* if last packet in the skb, let usbnet to process it */
276 if (len == skb->len || len + 1 == skb->len) {
277 skb_trim(skb, len);
278 break;
279 }
280
281 if (len == 0xffff) {
282 netdev_info(dev->net, "router was rebooted, re-enabling ethernet mode");
283 schedule_work(&priv->reenable_work);
284 } else if (len > CX82310_MTU) {
285 netdev_err(dev->net, "RX packet too long: %d B\n", len);
286 return 0;
287 }
288
289 /* incomplete packet, save it for the next skb */
290 if (len > skb->len) {
291 dev->partial_len = skb->len;
292 dev->partial_rem = len - skb->len;
293 memcpy((void *)dev->partial_data, skb->data,
294 dev->partial_len);
295 skb_pull(skb, skb->len);
296 break;
297 }
298
299 skb2 = alloc_skb(len, GFP_ATOMIC);
300 if (!skb2)
301 return 0;
302 skb_put(skb2, len);
303 memcpy(skb2->data, skb->data, len);
304 /* process the packet */
305 usbnet_skb_return(dev, skb2);
306
307 skb_pull(skb, (len + 1) & ~1);
308 }
309
310 /* let usbnet process the last packet */
311 return 1;
312}
313
314/* TX is easy, just add 2 bytes of length at the beginning */
315static struct sk_buff *cx82310_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
316 gfp_t flags)
317{
318 int len = skb->len;
319
320 if (skb_cow_head(skb, 2)) {
321 dev_kfree_skb_any(skb);
322 return NULL;
323 }
324 skb_push(skb, 2);
325
326 skb->data[0] = len;
327 skb->data[1] = len >> 8;
328
329 return skb;
330}
331
332
333static const struct driver_info cx82310_info = {
334 .description = "Conexant CX82310 USB ethernet",
335 .flags = FLAG_ETHER,
336 .bind = cx82310_bind,
337 .unbind = cx82310_unbind,
338 .rx_fixup = cx82310_rx_fixup,
339 .tx_fixup = cx82310_tx_fixup,
340};
341
342#define USB_DEVICE_CLASS(vend, prod, cl, sc, pr) \
343 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
344 USB_DEVICE_ID_MATCH_DEV_INFO, \
345 .idVendor = (vend), \
346 .idProduct = (prod), \
347 .bDeviceClass = (cl), \
348 .bDeviceSubClass = (sc), \
349 .bDeviceProtocol = (pr)
350
351static const struct usb_device_id products[] = {
352 {
353 USB_DEVICE_CLASS(0x0572, 0xcb01, 0xff, 0, 0),
354 .driver_info = (unsigned long) &cx82310_info
355 },
356 { },
357};
358MODULE_DEVICE_TABLE(usb, products);
359
360static struct usb_driver cx82310_driver = {
361 .name = "cx82310_eth",
362 .id_table = products,
363 .probe = usbnet_probe,
364 .disconnect = usbnet_disconnect,
365 .suspend = usbnet_suspend,
366 .resume = usbnet_resume,
367 .disable_hub_initiated_lpm = 1,
368};
369
370module_usb_driver(cx82310_driver);
371
372MODULE_AUTHOR("Ondrej Zary");
373MODULE_DESCRIPTION("Conexant CX82310-based ADSL router USB ethernet driver");
374MODULE_LICENSE("GPL");