Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * phylink models the MAC to optional PHY connection, supporting
4 * technologies such as SFP cages where the PHY is hot-pluggable.
5 *
6 * Copyright (C) 2015 Russell King
7 */
8#include <linux/acpi.h>
9#include <linux/ethtool.h>
10#include <linux/export.h>
11#include <linux/gpio/consumer.h>
12#include <linux/netdevice.h>
13#include <linux/of.h>
14#include <linux/of_mdio.h>
15#include <linux/phy.h>
16#include <linux/phy_fixed.h>
17#include <linux/phylink.h>
18#include <linux/rtnetlink.h>
19#include <linux/spinlock.h>
20#include <linux/timer.h>
21#include <linux/workqueue.h>
22
23#include "sfp.h"
24#include "swphy.h"
25
26#define SUPPORTED_INTERFACES \
27 (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE | \
28 SUPPORTED_BNC | SUPPORTED_AUI | SUPPORTED_Backplane)
29#define ADVERTISED_INTERFACES \
30 (ADVERTISED_TP | ADVERTISED_MII | ADVERTISED_FIBRE | \
31 ADVERTISED_BNC | ADVERTISED_AUI | ADVERTISED_Backplane)
32
33enum {
34 PHYLINK_DISABLE_STOPPED,
35 PHYLINK_DISABLE_LINK,
36 PHYLINK_DISABLE_MAC_WOL,
37
38 PCS_STATE_DOWN = 0,
39 PCS_STATE_STARTING,
40 PCS_STATE_STARTED,
41};
42
43/**
44 * struct phylink - internal data type for phylink
45 */
46struct phylink {
47 /* private: */
48 struct net_device *netdev;
49 const struct phylink_mac_ops *mac_ops;
50 struct phylink_config *config;
51 struct phylink_pcs *pcs;
52 struct device *dev;
53 unsigned int old_link_state:1;
54
55 unsigned long phylink_disable_state; /* bitmask of disables */
56 struct phy_device *phydev;
57 phy_interface_t link_interface; /* PHY_INTERFACE_xxx */
58 u8 cfg_link_an_mode; /* MLO_AN_xxx */
59 u8 cur_link_an_mode;
60 u8 link_port; /* The current non-phy ethtool port */
61 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
62
63 /* The link configuration settings */
64 struct phylink_link_state link_config;
65
66 /* The current settings */
67 phy_interface_t cur_interface;
68
69 struct gpio_desc *link_gpio;
70 unsigned int link_irq;
71 struct timer_list link_poll;
72 void (*get_fixed_state)(struct net_device *dev,
73 struct phylink_link_state *s);
74
75 struct mutex state_mutex;
76 struct phylink_link_state phy_state;
77 struct work_struct resolve;
78 unsigned int pcs_neg_mode;
79 unsigned int pcs_state;
80
81 bool mac_link_dropped;
82 bool using_mac_select_pcs;
83
84 struct sfp_bus *sfp_bus;
85 bool sfp_may_have_phy;
86 DECLARE_PHY_INTERFACE_MASK(sfp_interfaces);
87 __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
88 u8 sfp_port;
89};
90
91#define phylink_printk(level, pl, fmt, ...) \
92 do { \
93 if ((pl)->config->type == PHYLINK_NETDEV) \
94 netdev_printk(level, (pl)->netdev, fmt, ##__VA_ARGS__); \
95 else if ((pl)->config->type == PHYLINK_DEV) \
96 dev_printk(level, (pl)->dev, fmt, ##__VA_ARGS__); \
97 } while (0)
98
99#define phylink_err(pl, fmt, ...) \
100 phylink_printk(KERN_ERR, pl, fmt, ##__VA_ARGS__)
101#define phylink_warn(pl, fmt, ...) \
102 phylink_printk(KERN_WARNING, pl, fmt, ##__VA_ARGS__)
103#define phylink_info(pl, fmt, ...) \
104 phylink_printk(KERN_INFO, pl, fmt, ##__VA_ARGS__)
105#if defined(CONFIG_DYNAMIC_DEBUG)
106#define phylink_dbg(pl, fmt, ...) \
107do { \
108 if ((pl)->config->type == PHYLINK_NETDEV) \
109 netdev_dbg((pl)->netdev, fmt, ##__VA_ARGS__); \
110 else if ((pl)->config->type == PHYLINK_DEV) \
111 dev_dbg((pl)->dev, fmt, ##__VA_ARGS__); \
112} while (0)
113#elif defined(DEBUG)
114#define phylink_dbg(pl, fmt, ...) \
115 phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__)
116#else
117#define phylink_dbg(pl, fmt, ...) \
118({ \
119 if (0) \
120 phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__); \
121})
122#endif
123
124static const phy_interface_t phylink_sfp_interface_preference[] = {
125 PHY_INTERFACE_MODE_25GBASER,
126 PHY_INTERFACE_MODE_USXGMII,
127 PHY_INTERFACE_MODE_10GBASER,
128 PHY_INTERFACE_MODE_5GBASER,
129 PHY_INTERFACE_MODE_2500BASEX,
130 PHY_INTERFACE_MODE_SGMII,
131 PHY_INTERFACE_MODE_1000BASEX,
132 PHY_INTERFACE_MODE_100BASEX,
133};
134
135static DECLARE_PHY_INTERFACE_MASK(phylink_sfp_interfaces);
136
137/**
138 * phylink_set_port_modes() - set the port type modes in the ethtool mask
139 * @mask: ethtool link mode mask
140 *
141 * Sets all the port type modes in the ethtool mask. MAC drivers should
142 * use this in their 'validate' callback.
143 */
144void phylink_set_port_modes(unsigned long *mask)
145{
146 phylink_set(mask, TP);
147 phylink_set(mask, AUI);
148 phylink_set(mask, MII);
149 phylink_set(mask, FIBRE);
150 phylink_set(mask, BNC);
151 phylink_set(mask, Backplane);
152}
153EXPORT_SYMBOL_GPL(phylink_set_port_modes);
154
155static int phylink_is_empty_linkmode(const unsigned long *linkmode)
156{
157 __ETHTOOL_DECLARE_LINK_MODE_MASK(tmp) = { 0, };
158
159 phylink_set_port_modes(tmp);
160 phylink_set(tmp, Autoneg);
161 phylink_set(tmp, Pause);
162 phylink_set(tmp, Asym_Pause);
163
164 return linkmode_subset(linkmode, tmp);
165}
166
167static const char *phylink_an_mode_str(unsigned int mode)
168{
169 static const char *modestr[] = {
170 [MLO_AN_PHY] = "phy",
171 [MLO_AN_FIXED] = "fixed",
172 [MLO_AN_INBAND] = "inband",
173 };
174
175 return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown";
176}
177
178static unsigned int phylink_interface_signal_rate(phy_interface_t interface)
179{
180 switch (interface) {
181 case PHY_INTERFACE_MODE_SGMII:
182 case PHY_INTERFACE_MODE_1000BASEX: /* 1.25Mbd */
183 return 1250;
184 case PHY_INTERFACE_MODE_2500BASEX: /* 3.125Mbd */
185 return 3125;
186 case PHY_INTERFACE_MODE_5GBASER: /* 5.15625Mbd */
187 return 5156;
188 case PHY_INTERFACE_MODE_10GBASER: /* 10.3125Mbd */
189 return 10313;
190 default:
191 return 0;
192 }
193}
194
195/**
196 * phylink_interface_max_speed() - get the maximum speed of a phy interface
197 * @interface: phy interface mode defined by &typedef phy_interface_t
198 *
199 * Determine the maximum speed of a phy interface. This is intended to help
200 * determine the correct speed to pass to the MAC when the phy is performing
201 * rate matching.
202 *
203 * Return: The maximum speed of @interface
204 */
205static int phylink_interface_max_speed(phy_interface_t interface)
206{
207 switch (interface) {
208 case PHY_INTERFACE_MODE_100BASEX:
209 case PHY_INTERFACE_MODE_REVRMII:
210 case PHY_INTERFACE_MODE_RMII:
211 case PHY_INTERFACE_MODE_SMII:
212 case PHY_INTERFACE_MODE_REVMII:
213 case PHY_INTERFACE_MODE_MII:
214 return SPEED_100;
215
216 case PHY_INTERFACE_MODE_TBI:
217 case PHY_INTERFACE_MODE_MOCA:
218 case PHY_INTERFACE_MODE_RTBI:
219 case PHY_INTERFACE_MODE_1000BASEX:
220 case PHY_INTERFACE_MODE_1000BASEKX:
221 case PHY_INTERFACE_MODE_TRGMII:
222 case PHY_INTERFACE_MODE_RGMII_TXID:
223 case PHY_INTERFACE_MODE_RGMII_RXID:
224 case PHY_INTERFACE_MODE_RGMII_ID:
225 case PHY_INTERFACE_MODE_RGMII:
226 case PHY_INTERFACE_MODE_PSGMII:
227 case PHY_INTERFACE_MODE_QSGMII:
228 case PHY_INTERFACE_MODE_QUSGMII:
229 case PHY_INTERFACE_MODE_SGMII:
230 case PHY_INTERFACE_MODE_GMII:
231 return SPEED_1000;
232
233 case PHY_INTERFACE_MODE_2500BASEX:
234 return SPEED_2500;
235
236 case PHY_INTERFACE_MODE_5GBASER:
237 return SPEED_5000;
238
239 case PHY_INTERFACE_MODE_XGMII:
240 case PHY_INTERFACE_MODE_RXAUI:
241 case PHY_INTERFACE_MODE_XAUI:
242 case PHY_INTERFACE_MODE_10GBASER:
243 case PHY_INTERFACE_MODE_10GKR:
244 case PHY_INTERFACE_MODE_USXGMII:
245 return SPEED_10000;
246
247 case PHY_INTERFACE_MODE_25GBASER:
248 return SPEED_25000;
249
250 case PHY_INTERFACE_MODE_XLGMII:
251 return SPEED_40000;
252
253 case PHY_INTERFACE_MODE_INTERNAL:
254 case PHY_INTERFACE_MODE_NA:
255 case PHY_INTERFACE_MODE_MAX:
256 /* No idea! Garbage in, unknown out */
257 return SPEED_UNKNOWN;
258 }
259
260 /* If we get here, someone forgot to add an interface mode above */
261 WARN_ON_ONCE(1);
262 return SPEED_UNKNOWN;
263}
264
265/**
266 * phylink_caps_to_linkmodes() - Convert capabilities to ethtool link modes
267 * @linkmodes: ethtool linkmode mask (must be already initialised)
268 * @caps: bitmask of MAC capabilities
269 *
270 * Set all possible pause, speed and duplex linkmodes in @linkmodes that are
271 * supported by the @caps. @linkmodes must have been initialised previously.
272 */
273static void phylink_caps_to_linkmodes(unsigned long *linkmodes,
274 unsigned long caps)
275{
276 if (caps & MAC_SYM_PAUSE)
277 __set_bit(ETHTOOL_LINK_MODE_Pause_BIT, linkmodes);
278
279 if (caps & MAC_ASYM_PAUSE)
280 __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, linkmodes);
281
282 if (caps & MAC_10HD) {
283 __set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, linkmodes);
284 __set_bit(ETHTOOL_LINK_MODE_10baseT1S_Half_BIT, linkmodes);
285 __set_bit(ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT, linkmodes);
286 }
287
288 if (caps & MAC_10FD) {
289 __set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, linkmodes);
290 __set_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT, linkmodes);
291 __set_bit(ETHTOOL_LINK_MODE_10baseT1S_Full_BIT, linkmodes);
292 }
293
294 if (caps & MAC_100HD) {
295 __set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, linkmodes);
296 __set_bit(ETHTOOL_LINK_MODE_100baseFX_Half_BIT, linkmodes);
297 }
298
299 if (caps & MAC_100FD) {
300 __set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, linkmodes);
301 __set_bit(ETHTOOL_LINK_MODE_100baseT1_Full_BIT, linkmodes);
302 __set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT, linkmodes);
303 }
304
305 if (caps & MAC_1000HD)
306 __set_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, linkmodes);
307
308 if (caps & MAC_1000FD) {
309 __set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, linkmodes);
310 __set_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, linkmodes);
311 __set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, linkmodes);
312 __set_bit(ETHTOOL_LINK_MODE_1000baseT1_Full_BIT, linkmodes);
313 }
314
315 if (caps & MAC_2500FD) {
316 __set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, linkmodes);
317 __set_bit(ETHTOOL_LINK_MODE_2500baseX_Full_BIT, linkmodes);
318 }
319
320 if (caps & MAC_5000FD)
321 __set_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, linkmodes);
322
323 if (caps & MAC_10000FD) {
324 __set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, linkmodes);
325 __set_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, linkmodes);
326 __set_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, linkmodes);
327 __set_bit(ETHTOOL_LINK_MODE_10000baseR_FEC_BIT, linkmodes);
328 __set_bit(ETHTOOL_LINK_MODE_10000baseCR_Full_BIT, linkmodes);
329 __set_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT, linkmodes);
330 __set_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT, linkmodes);
331 __set_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT, linkmodes);
332 __set_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT, linkmodes);
333 }
334
335 if (caps & MAC_25000FD) {
336 __set_bit(ETHTOOL_LINK_MODE_25000baseCR_Full_BIT, linkmodes);
337 __set_bit(ETHTOOL_LINK_MODE_25000baseKR_Full_BIT, linkmodes);
338 __set_bit(ETHTOOL_LINK_MODE_25000baseSR_Full_BIT, linkmodes);
339 }
340
341 if (caps & MAC_40000FD) {
342 __set_bit(ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT, linkmodes);
343 __set_bit(ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT, linkmodes);
344 __set_bit(ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT, linkmodes);
345 __set_bit(ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT, linkmodes);
346 }
347
348 if (caps & MAC_50000FD) {
349 __set_bit(ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT, linkmodes);
350 __set_bit(ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT, linkmodes);
351 __set_bit(ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT, linkmodes);
352 __set_bit(ETHTOOL_LINK_MODE_50000baseKR_Full_BIT, linkmodes);
353 __set_bit(ETHTOOL_LINK_MODE_50000baseSR_Full_BIT, linkmodes);
354 __set_bit(ETHTOOL_LINK_MODE_50000baseCR_Full_BIT, linkmodes);
355 __set_bit(ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT,
356 linkmodes);
357 __set_bit(ETHTOOL_LINK_MODE_50000baseDR_Full_BIT, linkmodes);
358 }
359
360 if (caps & MAC_56000FD) {
361 __set_bit(ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT, linkmodes);
362 __set_bit(ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT, linkmodes);
363 __set_bit(ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT, linkmodes);
364 __set_bit(ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT, linkmodes);
365 }
366
367 if (caps & MAC_100000FD) {
368 __set_bit(ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT, linkmodes);
369 __set_bit(ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT, linkmodes);
370 __set_bit(ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT, linkmodes);
371 __set_bit(ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT,
372 linkmodes);
373 __set_bit(ETHTOOL_LINK_MODE_100000baseKR2_Full_BIT, linkmodes);
374 __set_bit(ETHTOOL_LINK_MODE_100000baseSR2_Full_BIT, linkmodes);
375 __set_bit(ETHTOOL_LINK_MODE_100000baseCR2_Full_BIT, linkmodes);
376 __set_bit(ETHTOOL_LINK_MODE_100000baseLR2_ER2_FR2_Full_BIT,
377 linkmodes);
378 __set_bit(ETHTOOL_LINK_MODE_100000baseDR2_Full_BIT, linkmodes);
379 __set_bit(ETHTOOL_LINK_MODE_100000baseKR_Full_BIT, linkmodes);
380 __set_bit(ETHTOOL_LINK_MODE_100000baseSR_Full_BIT, linkmodes);
381 __set_bit(ETHTOOL_LINK_MODE_100000baseLR_ER_FR_Full_BIT,
382 linkmodes);
383 __set_bit(ETHTOOL_LINK_MODE_100000baseCR_Full_BIT, linkmodes);
384 __set_bit(ETHTOOL_LINK_MODE_100000baseDR_Full_BIT, linkmodes);
385 }
386
387 if (caps & MAC_200000FD) {
388 __set_bit(ETHTOOL_LINK_MODE_200000baseKR4_Full_BIT, linkmodes);
389 __set_bit(ETHTOOL_LINK_MODE_200000baseSR4_Full_BIT, linkmodes);
390 __set_bit(ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT,
391 linkmodes);
392 __set_bit(ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT, linkmodes);
393 __set_bit(ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT, linkmodes);
394 __set_bit(ETHTOOL_LINK_MODE_200000baseKR2_Full_BIT, linkmodes);
395 __set_bit(ETHTOOL_LINK_MODE_200000baseSR2_Full_BIT, linkmodes);
396 __set_bit(ETHTOOL_LINK_MODE_200000baseLR2_ER2_FR2_Full_BIT,
397 linkmodes);
398 __set_bit(ETHTOOL_LINK_MODE_200000baseDR2_Full_BIT, linkmodes);
399 __set_bit(ETHTOOL_LINK_MODE_200000baseCR2_Full_BIT, linkmodes);
400 }
401
402 if (caps & MAC_400000FD) {
403 __set_bit(ETHTOOL_LINK_MODE_400000baseKR8_Full_BIT, linkmodes);
404 __set_bit(ETHTOOL_LINK_MODE_400000baseSR8_Full_BIT, linkmodes);
405 __set_bit(ETHTOOL_LINK_MODE_400000baseLR8_ER8_FR8_Full_BIT,
406 linkmodes);
407 __set_bit(ETHTOOL_LINK_MODE_400000baseDR8_Full_BIT, linkmodes);
408 __set_bit(ETHTOOL_LINK_MODE_400000baseCR8_Full_BIT, linkmodes);
409 __set_bit(ETHTOOL_LINK_MODE_400000baseKR4_Full_BIT, linkmodes);
410 __set_bit(ETHTOOL_LINK_MODE_400000baseSR4_Full_BIT, linkmodes);
411 __set_bit(ETHTOOL_LINK_MODE_400000baseLR4_ER4_FR4_Full_BIT,
412 linkmodes);
413 __set_bit(ETHTOOL_LINK_MODE_400000baseDR4_Full_BIT, linkmodes);
414 __set_bit(ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT, linkmodes);
415 }
416}
417
418static struct {
419 unsigned long mask;
420 int speed;
421 unsigned int duplex;
422} phylink_caps_params[] = {
423 { MAC_400000FD, SPEED_400000, DUPLEX_FULL },
424 { MAC_200000FD, SPEED_200000, DUPLEX_FULL },
425 { MAC_100000FD, SPEED_100000, DUPLEX_FULL },
426 { MAC_56000FD, SPEED_56000, DUPLEX_FULL },
427 { MAC_50000FD, SPEED_50000, DUPLEX_FULL },
428 { MAC_40000FD, SPEED_40000, DUPLEX_FULL },
429 { MAC_25000FD, SPEED_25000, DUPLEX_FULL },
430 { MAC_20000FD, SPEED_20000, DUPLEX_FULL },
431 { MAC_10000FD, SPEED_10000, DUPLEX_FULL },
432 { MAC_5000FD, SPEED_5000, DUPLEX_FULL },
433 { MAC_2500FD, SPEED_2500, DUPLEX_FULL },
434 { MAC_1000FD, SPEED_1000, DUPLEX_FULL },
435 { MAC_1000HD, SPEED_1000, DUPLEX_HALF },
436 { MAC_100FD, SPEED_100, DUPLEX_FULL },
437 { MAC_100HD, SPEED_100, DUPLEX_HALF },
438 { MAC_10FD, SPEED_10, DUPLEX_FULL },
439 { MAC_10HD, SPEED_10, DUPLEX_HALF },
440};
441
442/**
443 * phylink_limit_mac_speed - limit the phylink_config to a maximum speed
444 * @config: pointer to a &struct phylink_config
445 * @max_speed: maximum speed
446 *
447 * Mask off MAC capabilities for speeds higher than the @max_speed parameter.
448 * Any further motifications of config.mac_capabilities will override this.
449 */
450void phylink_limit_mac_speed(struct phylink_config *config, u32 max_speed)
451{
452 int i;
453
454 for (i = 0; i < ARRAY_SIZE(phylink_caps_params) &&
455 phylink_caps_params[i].speed > max_speed; i++)
456 config->mac_capabilities &= ~phylink_caps_params[i].mask;
457}
458EXPORT_SYMBOL_GPL(phylink_limit_mac_speed);
459
460/**
461 * phylink_cap_from_speed_duplex - Get mac capability from speed/duplex
462 * @speed: the speed to search for
463 * @duplex: the duplex to search for
464 *
465 * Find the mac capability for a given speed and duplex.
466 *
467 * Return: A mask with the mac capability patching @speed and @duplex, or 0 if
468 * there were no matches.
469 */
470static unsigned long phylink_cap_from_speed_duplex(int speed,
471 unsigned int duplex)
472{
473 int i;
474
475 for (i = 0; i < ARRAY_SIZE(phylink_caps_params); i++) {
476 if (speed == phylink_caps_params[i].speed &&
477 duplex == phylink_caps_params[i].duplex)
478 return phylink_caps_params[i].mask;
479 }
480
481 return 0;
482}
483
484/**
485 * phylink_get_capabilities() - get capabilities for a given MAC
486 * @interface: phy interface mode defined by &typedef phy_interface_t
487 * @mac_capabilities: bitmask of MAC capabilities
488 * @rate_matching: type of rate matching being performed
489 *
490 * Get the MAC capabilities that are supported by the @interface mode and
491 * @mac_capabilities.
492 */
493static unsigned long phylink_get_capabilities(phy_interface_t interface,
494 unsigned long mac_capabilities,
495 int rate_matching)
496{
497 int max_speed = phylink_interface_max_speed(interface);
498 unsigned long caps = MAC_SYM_PAUSE | MAC_ASYM_PAUSE;
499 unsigned long matched_caps = 0;
500
501 switch (interface) {
502 case PHY_INTERFACE_MODE_USXGMII:
503 caps |= MAC_10000FD | MAC_5000FD | MAC_2500FD;
504 fallthrough;
505
506 case PHY_INTERFACE_MODE_RGMII_TXID:
507 case PHY_INTERFACE_MODE_RGMII_RXID:
508 case PHY_INTERFACE_MODE_RGMII_ID:
509 case PHY_INTERFACE_MODE_RGMII:
510 case PHY_INTERFACE_MODE_PSGMII:
511 case PHY_INTERFACE_MODE_QSGMII:
512 case PHY_INTERFACE_MODE_QUSGMII:
513 case PHY_INTERFACE_MODE_SGMII:
514 case PHY_INTERFACE_MODE_GMII:
515 caps |= MAC_1000HD | MAC_1000FD;
516 fallthrough;
517
518 case PHY_INTERFACE_MODE_REVRMII:
519 case PHY_INTERFACE_MODE_RMII:
520 case PHY_INTERFACE_MODE_SMII:
521 case PHY_INTERFACE_MODE_REVMII:
522 case PHY_INTERFACE_MODE_MII:
523 caps |= MAC_10HD | MAC_10FD;
524 fallthrough;
525
526 case PHY_INTERFACE_MODE_100BASEX:
527 caps |= MAC_100HD | MAC_100FD;
528 break;
529
530 case PHY_INTERFACE_MODE_TBI:
531 case PHY_INTERFACE_MODE_MOCA:
532 case PHY_INTERFACE_MODE_RTBI:
533 case PHY_INTERFACE_MODE_1000BASEX:
534 caps |= MAC_1000HD;
535 fallthrough;
536 case PHY_INTERFACE_MODE_1000BASEKX:
537 case PHY_INTERFACE_MODE_TRGMII:
538 caps |= MAC_1000FD;
539 break;
540
541 case PHY_INTERFACE_MODE_2500BASEX:
542 caps |= MAC_2500FD;
543 break;
544
545 case PHY_INTERFACE_MODE_5GBASER:
546 caps |= MAC_5000FD;
547 break;
548
549 case PHY_INTERFACE_MODE_XGMII:
550 case PHY_INTERFACE_MODE_RXAUI:
551 case PHY_INTERFACE_MODE_XAUI:
552 case PHY_INTERFACE_MODE_10GBASER:
553 case PHY_INTERFACE_MODE_10GKR:
554 caps |= MAC_10000FD;
555 break;
556
557 case PHY_INTERFACE_MODE_25GBASER:
558 caps |= MAC_25000FD;
559 break;
560
561 case PHY_INTERFACE_MODE_XLGMII:
562 caps |= MAC_40000FD;
563 break;
564
565 case PHY_INTERFACE_MODE_INTERNAL:
566 caps |= ~0;
567 break;
568
569 case PHY_INTERFACE_MODE_NA:
570 case PHY_INTERFACE_MODE_MAX:
571 break;
572 }
573
574 switch (rate_matching) {
575 case RATE_MATCH_OPEN_LOOP:
576 /* TODO */
577 fallthrough;
578 case RATE_MATCH_NONE:
579 matched_caps = 0;
580 break;
581 case RATE_MATCH_PAUSE: {
582 /* The MAC must support asymmetric pause towards the local
583 * device for this. We could allow just symmetric pause, but
584 * then we might have to renegotiate if the link partner
585 * doesn't support pause. This is because there's no way to
586 * accept pause frames without transmitting them if we only
587 * support symmetric pause.
588 */
589 if (!(mac_capabilities & MAC_SYM_PAUSE) ||
590 !(mac_capabilities & MAC_ASYM_PAUSE))
591 break;
592
593 /* We can't adapt if the MAC doesn't support the interface's
594 * max speed at full duplex.
595 */
596 if (mac_capabilities &
597 phylink_cap_from_speed_duplex(max_speed, DUPLEX_FULL)) {
598 /* Although a duplex-matching phy might exist, we
599 * conservatively remove these modes because the MAC
600 * will not be aware of the half-duplex nature of the
601 * link.
602 */
603 matched_caps = GENMASK(__fls(caps), __fls(MAC_10HD));
604 matched_caps &= ~(MAC_1000HD | MAC_100HD | MAC_10HD);
605 }
606 break;
607 }
608 case RATE_MATCH_CRS:
609 /* The MAC must support half duplex at the interface's max
610 * speed.
611 */
612 if (mac_capabilities &
613 phylink_cap_from_speed_duplex(max_speed, DUPLEX_HALF)) {
614 matched_caps = GENMASK(__fls(caps), __fls(MAC_10HD));
615 matched_caps &= mac_capabilities;
616 }
617 break;
618 }
619
620 return (caps & mac_capabilities) | matched_caps;
621}
622
623/**
624 * phylink_validate_mask_caps() - Restrict link modes based on caps
625 * @supported: ethtool bitmask for supported link modes.
626 * @state: pointer to a &struct phylink_link_state.
627 * @mac_capabilities: bitmask of MAC capabilities
628 *
629 * Calculate the supported link modes based on @mac_capabilities, and restrict
630 * @supported and @state based on that. Use this function if your capabiliies
631 * aren't constant, such as if they vary depending on the interface.
632 */
633static void phylink_validate_mask_caps(unsigned long *supported,
634 struct phylink_link_state *state,
635 unsigned long mac_capabilities)
636{
637 __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
638 unsigned long caps;
639
640 phylink_set_port_modes(mask);
641 phylink_set(mask, Autoneg);
642 caps = phylink_get_capabilities(state->interface, mac_capabilities,
643 state->rate_matching);
644 phylink_caps_to_linkmodes(mask, caps);
645
646 linkmode_and(supported, supported, mask);
647 linkmode_and(state->advertising, state->advertising, mask);
648}
649
650static int phylink_validate_mac_and_pcs(struct phylink *pl,
651 unsigned long *supported,
652 struct phylink_link_state *state)
653{
654 unsigned long capabilities;
655 struct phylink_pcs *pcs;
656 int ret;
657
658 /* Get the PCS for this interface mode */
659 if (pl->using_mac_select_pcs) {
660 pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface);
661 if (IS_ERR(pcs))
662 return PTR_ERR(pcs);
663 } else {
664 pcs = pl->pcs;
665 }
666
667 if (pcs) {
668 /* The PCS, if present, must be setup before phylink_create()
669 * has been called. If the ops is not initialised, print an
670 * error and backtrace rather than oopsing the kernel.
671 */
672 if (!pcs->ops) {
673 phylink_err(pl, "interface %s: uninitialised PCS\n",
674 phy_modes(state->interface));
675 dump_stack();
676 return -EINVAL;
677 }
678
679 /* Validate the link parameters with the PCS */
680 if (pcs->ops->pcs_validate) {
681 ret = pcs->ops->pcs_validate(pcs, supported, state);
682 if (ret < 0 || phylink_is_empty_linkmode(supported))
683 return -EINVAL;
684
685 /* Ensure the advertising mask is a subset of the
686 * supported mask.
687 */
688 linkmode_and(state->advertising, state->advertising,
689 supported);
690 }
691 }
692
693 /* Then validate the link parameters with the MAC */
694 if (pl->mac_ops->mac_get_caps)
695 capabilities = pl->mac_ops->mac_get_caps(pl->config,
696 state->interface);
697 else
698 capabilities = pl->config->mac_capabilities;
699
700 phylink_validate_mask_caps(supported, state, capabilities);
701
702 return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
703}
704
705static void phylink_validate_one(struct phylink *pl, struct phy_device *phy,
706 const unsigned long *supported,
707 const struct phylink_link_state *state,
708 phy_interface_t interface,
709 unsigned long *accum_supported,
710 unsigned long *accum_advertising)
711{
712 __ETHTOOL_DECLARE_LINK_MODE_MASK(tmp_supported);
713 struct phylink_link_state tmp_state;
714
715 linkmode_copy(tmp_supported, supported);
716
717 tmp_state = *state;
718 tmp_state.interface = interface;
719
720 if (phy)
721 tmp_state.rate_matching = phy_get_rate_matching(phy, interface);
722
723 if (!phylink_validate_mac_and_pcs(pl, tmp_supported, &tmp_state)) {
724 phylink_dbg(pl, " interface %u (%s) rate match %s supports %*pbl\n",
725 interface, phy_modes(interface),
726 phy_rate_matching_to_str(tmp_state.rate_matching),
727 __ETHTOOL_LINK_MODE_MASK_NBITS, tmp_supported);
728
729 linkmode_or(accum_supported, accum_supported, tmp_supported);
730 linkmode_or(accum_advertising, accum_advertising,
731 tmp_state.advertising);
732 }
733}
734
735static int phylink_validate_mask(struct phylink *pl, struct phy_device *phy,
736 unsigned long *supported,
737 struct phylink_link_state *state,
738 const unsigned long *interfaces)
739{
740 __ETHTOOL_DECLARE_LINK_MODE_MASK(all_adv) = { 0, };
741 __ETHTOOL_DECLARE_LINK_MODE_MASK(all_s) = { 0, };
742 int interface;
743
744 for_each_set_bit(interface, interfaces, PHY_INTERFACE_MODE_MAX)
745 phylink_validate_one(pl, phy, supported, state, interface,
746 all_s, all_adv);
747
748 linkmode_copy(supported, all_s);
749 linkmode_copy(state->advertising, all_adv);
750
751 return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
752}
753
754static int phylink_validate(struct phylink *pl, unsigned long *supported,
755 struct phylink_link_state *state)
756{
757 const unsigned long *interfaces = pl->config->supported_interfaces;
758
759 if (state->interface == PHY_INTERFACE_MODE_NA)
760 return phylink_validate_mask(pl, NULL, supported, state,
761 interfaces);
762
763 if (!test_bit(state->interface, interfaces))
764 return -EINVAL;
765
766 return phylink_validate_mac_and_pcs(pl, supported, state);
767}
768
769static int phylink_parse_fixedlink(struct phylink *pl,
770 const struct fwnode_handle *fwnode)
771{
772 struct fwnode_handle *fixed_node;
773 bool pause, asym_pause, autoneg;
774 const struct phy_setting *s;
775 struct gpio_desc *desc;
776 u32 speed;
777 int ret;
778
779 fixed_node = fwnode_get_named_child_node(fwnode, "fixed-link");
780 if (fixed_node) {
781 ret = fwnode_property_read_u32(fixed_node, "speed", &speed);
782
783 pl->link_config.speed = speed;
784 pl->link_config.duplex = DUPLEX_HALF;
785
786 if (fwnode_property_read_bool(fixed_node, "full-duplex"))
787 pl->link_config.duplex = DUPLEX_FULL;
788
789 /* We treat the "pause" and "asym-pause" terminology as
790 * defining the link partner's ability.
791 */
792 if (fwnode_property_read_bool(fixed_node, "pause"))
793 __set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
794 pl->link_config.lp_advertising);
795 if (fwnode_property_read_bool(fixed_node, "asym-pause"))
796 __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
797 pl->link_config.lp_advertising);
798
799 if (ret == 0) {
800 desc = fwnode_gpiod_get_index(fixed_node, "link", 0,
801 GPIOD_IN, "?");
802
803 if (!IS_ERR(desc))
804 pl->link_gpio = desc;
805 else if (desc == ERR_PTR(-EPROBE_DEFER))
806 ret = -EPROBE_DEFER;
807 }
808 fwnode_handle_put(fixed_node);
809
810 if (ret)
811 return ret;
812 } else {
813 u32 prop[5];
814
815 ret = fwnode_property_read_u32_array(fwnode, "fixed-link",
816 NULL, 0);
817 if (ret != ARRAY_SIZE(prop)) {
818 phylink_err(pl, "broken fixed-link?\n");
819 return -EINVAL;
820 }
821
822 ret = fwnode_property_read_u32_array(fwnode, "fixed-link",
823 prop, ARRAY_SIZE(prop));
824 if (!ret) {
825 pl->link_config.duplex = prop[1] ?
826 DUPLEX_FULL : DUPLEX_HALF;
827 pl->link_config.speed = prop[2];
828 if (prop[3])
829 __set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
830 pl->link_config.lp_advertising);
831 if (prop[4])
832 __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
833 pl->link_config.lp_advertising);
834 }
835 }
836
837 if (pl->link_config.speed > SPEED_1000 &&
838 pl->link_config.duplex != DUPLEX_FULL)
839 phylink_warn(pl, "fixed link specifies half duplex for %dMbps link?\n",
840 pl->link_config.speed);
841
842 linkmode_fill(pl->supported);
843 linkmode_copy(pl->link_config.advertising, pl->supported);
844 phylink_validate(pl, pl->supported, &pl->link_config);
845
846 pause = phylink_test(pl->supported, Pause);
847 asym_pause = phylink_test(pl->supported, Asym_Pause);
848 autoneg = phylink_test(pl->supported, Autoneg);
849 s = phy_lookup_setting(pl->link_config.speed, pl->link_config.duplex,
850 pl->supported, true);
851 linkmode_zero(pl->supported);
852 phylink_set(pl->supported, MII);
853
854 if (pause)
855 phylink_set(pl->supported, Pause);
856
857 if (asym_pause)
858 phylink_set(pl->supported, Asym_Pause);
859
860 if (autoneg)
861 phylink_set(pl->supported, Autoneg);
862
863 if (s) {
864 __set_bit(s->bit, pl->supported);
865 __set_bit(s->bit, pl->link_config.lp_advertising);
866 } else {
867 phylink_warn(pl, "fixed link %s duplex %dMbps not recognised\n",
868 pl->link_config.duplex == DUPLEX_FULL ? "full" : "half",
869 pl->link_config.speed);
870 }
871
872 linkmode_and(pl->link_config.advertising, pl->link_config.advertising,
873 pl->supported);
874
875 pl->link_config.link = 1;
876 pl->link_config.an_complete = 1;
877
878 return 0;
879}
880
881static int phylink_parse_mode(struct phylink *pl,
882 const struct fwnode_handle *fwnode)
883{
884 struct fwnode_handle *dn;
885 const char *managed;
886 unsigned long caps;
887
888 dn = fwnode_get_named_child_node(fwnode, "fixed-link");
889 if (dn || fwnode_property_present(fwnode, "fixed-link"))
890 pl->cfg_link_an_mode = MLO_AN_FIXED;
891 fwnode_handle_put(dn);
892
893 if ((fwnode_property_read_string(fwnode, "managed", &managed) == 0 &&
894 strcmp(managed, "in-band-status") == 0) ||
895 pl->config->ovr_an_inband) {
896 if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
897 phylink_err(pl,
898 "can't use both fixed-link and in-band-status\n");
899 return -EINVAL;
900 }
901
902 linkmode_zero(pl->supported);
903 phylink_set(pl->supported, MII);
904 phylink_set(pl->supported, Autoneg);
905 phylink_set(pl->supported, Asym_Pause);
906 phylink_set(pl->supported, Pause);
907 pl->cfg_link_an_mode = MLO_AN_INBAND;
908
909 switch (pl->link_config.interface) {
910 case PHY_INTERFACE_MODE_SGMII:
911 case PHY_INTERFACE_MODE_PSGMII:
912 case PHY_INTERFACE_MODE_QSGMII:
913 case PHY_INTERFACE_MODE_QUSGMII:
914 case PHY_INTERFACE_MODE_RGMII:
915 case PHY_INTERFACE_MODE_RGMII_ID:
916 case PHY_INTERFACE_MODE_RGMII_RXID:
917 case PHY_INTERFACE_MODE_RGMII_TXID:
918 case PHY_INTERFACE_MODE_RTBI:
919 case PHY_INTERFACE_MODE_1000BASEX:
920 case PHY_INTERFACE_MODE_2500BASEX:
921 case PHY_INTERFACE_MODE_5GBASER:
922 case PHY_INTERFACE_MODE_25GBASER:
923 case PHY_INTERFACE_MODE_USXGMII:
924 case PHY_INTERFACE_MODE_10GKR:
925 case PHY_INTERFACE_MODE_10GBASER:
926 case PHY_INTERFACE_MODE_XLGMII:
927 caps = ~(MAC_SYM_PAUSE | MAC_ASYM_PAUSE);
928 caps = phylink_get_capabilities(pl->link_config.interface, caps,
929 RATE_MATCH_NONE);
930 phylink_caps_to_linkmodes(pl->supported, caps);
931 break;
932
933 default:
934 phylink_err(pl,
935 "incorrect link mode %s for in-band status\n",
936 phy_modes(pl->link_config.interface));
937 return -EINVAL;
938 }
939
940 linkmode_copy(pl->link_config.advertising, pl->supported);
941
942 if (phylink_validate(pl, pl->supported, &pl->link_config)) {
943 phylink_err(pl,
944 "failed to validate link configuration for in-band status\n");
945 return -EINVAL;
946 }
947 }
948
949 return 0;
950}
951
952static void phylink_apply_manual_flow(struct phylink *pl,
953 struct phylink_link_state *state)
954{
955 /* If autoneg is disabled, pause AN is also disabled */
956 if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
957 state->advertising))
958 state->pause &= ~MLO_PAUSE_AN;
959
960 /* Manual configuration of pause modes */
961 if (!(pl->link_config.pause & MLO_PAUSE_AN))
962 state->pause = pl->link_config.pause;
963}
964
965static void phylink_resolve_an_pause(struct phylink_link_state *state)
966{
967 bool tx_pause, rx_pause;
968
969 if (state->duplex == DUPLEX_FULL) {
970 linkmode_resolve_pause(state->advertising,
971 state->lp_advertising,
972 &tx_pause, &rx_pause);
973 if (tx_pause)
974 state->pause |= MLO_PAUSE_TX;
975 if (rx_pause)
976 state->pause |= MLO_PAUSE_RX;
977 }
978}
979
980static void phylink_pcs_pre_config(struct phylink_pcs *pcs,
981 phy_interface_t interface)
982{
983 if (pcs && pcs->ops->pcs_pre_config)
984 pcs->ops->pcs_pre_config(pcs, interface);
985}
986
987static int phylink_pcs_post_config(struct phylink_pcs *pcs,
988 phy_interface_t interface)
989{
990 int err = 0;
991
992 if (pcs && pcs->ops->pcs_post_config)
993 err = pcs->ops->pcs_post_config(pcs, interface);
994
995 return err;
996}
997
998static void phylink_pcs_disable(struct phylink_pcs *pcs)
999{
1000 if (pcs && pcs->ops->pcs_disable)
1001 pcs->ops->pcs_disable(pcs);
1002}
1003
1004static int phylink_pcs_enable(struct phylink_pcs *pcs)
1005{
1006 int err = 0;
1007
1008 if (pcs && pcs->ops->pcs_enable)
1009 err = pcs->ops->pcs_enable(pcs);
1010
1011 return err;
1012}
1013
1014static int phylink_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
1015 const struct phylink_link_state *state,
1016 bool permit_pause_to_mac)
1017{
1018 if (!pcs)
1019 return 0;
1020
1021 return pcs->ops->pcs_config(pcs, neg_mode, state->interface,
1022 state->advertising, permit_pause_to_mac);
1023}
1024
1025static void phylink_pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode,
1026 phy_interface_t interface, int speed,
1027 int duplex)
1028{
1029 if (pcs && pcs->ops->pcs_link_up)
1030 pcs->ops->pcs_link_up(pcs, neg_mode, interface, speed, duplex);
1031}
1032
1033static void phylink_pcs_poll_stop(struct phylink *pl)
1034{
1035 if (pl->cfg_link_an_mode == MLO_AN_INBAND)
1036 del_timer(&pl->link_poll);
1037}
1038
1039static void phylink_pcs_poll_start(struct phylink *pl)
1040{
1041 if (pl->pcs && pl->pcs->poll && pl->cfg_link_an_mode == MLO_AN_INBAND)
1042 mod_timer(&pl->link_poll, jiffies + HZ);
1043}
1044
1045static void phylink_mac_config(struct phylink *pl,
1046 const struct phylink_link_state *state)
1047{
1048 struct phylink_link_state st = *state;
1049
1050 /* Stop drivers incorrectly using these */
1051 linkmode_zero(st.lp_advertising);
1052 st.speed = SPEED_UNKNOWN;
1053 st.duplex = DUPLEX_UNKNOWN;
1054 st.an_complete = false;
1055 st.link = false;
1056
1057 phylink_dbg(pl,
1058 "%s: mode=%s/%s/%s adv=%*pb pause=%02x\n",
1059 __func__, phylink_an_mode_str(pl->cur_link_an_mode),
1060 phy_modes(st.interface),
1061 phy_rate_matching_to_str(st.rate_matching),
1062 __ETHTOOL_LINK_MODE_MASK_NBITS, st.advertising,
1063 st.pause);
1064
1065 pl->mac_ops->mac_config(pl->config, pl->cur_link_an_mode, &st);
1066}
1067
1068static void phylink_pcs_an_restart(struct phylink *pl)
1069{
1070 if (pl->pcs && linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
1071 pl->link_config.advertising) &&
1072 phy_interface_mode_is_8023z(pl->link_config.interface) &&
1073 phylink_autoneg_inband(pl->cur_link_an_mode))
1074 pl->pcs->ops->pcs_an_restart(pl->pcs);
1075}
1076
1077/**
1078 * phylink_pcs_neg_mode() - helper to determine PCS inband mode
1079 * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
1080 * @interface: interface mode to be used
1081 * @advertising: adertisement ethtool link mode mask
1082 *
1083 * Determines the negotiation mode to be used by the PCS, and returns
1084 * one of:
1085 *
1086 * - %PHYLINK_PCS_NEG_NONE: interface mode does not support inband
1087 * - %PHYLINK_PCS_NEG_OUTBAND: an out of band mode (e.g. reading the PHY)
1088 * will be used.
1089 * - %PHYLINK_PCS_NEG_INBAND_DISABLED: inband mode selected but autoneg
1090 * disabled
1091 * - %PHYLINK_PCS_NEG_INBAND_ENABLED: inband mode selected and autoneg enabled
1092 *
1093 * Note: this is for cases where the PCS itself is involved in negotiation
1094 * (e.g. Clause 37, SGMII and similar) not Clause 73.
1095 */
1096static unsigned int phylink_pcs_neg_mode(unsigned int mode,
1097 phy_interface_t interface,
1098 const unsigned long *advertising)
1099{
1100 unsigned int neg_mode;
1101
1102 switch (interface) {
1103 case PHY_INTERFACE_MODE_SGMII:
1104 case PHY_INTERFACE_MODE_QSGMII:
1105 case PHY_INTERFACE_MODE_QUSGMII:
1106 case PHY_INTERFACE_MODE_USXGMII:
1107 /* These protocols are designed for use with a PHY which
1108 * communicates its negotiation result back to the MAC via
1109 * inband communication. Note: there exist PHYs that run
1110 * with SGMII but do not send the inband data.
1111 */
1112 if (!phylink_autoneg_inband(mode))
1113 neg_mode = PHYLINK_PCS_NEG_OUTBAND;
1114 else
1115 neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED;
1116 break;
1117
1118 case PHY_INTERFACE_MODE_1000BASEX:
1119 case PHY_INTERFACE_MODE_2500BASEX:
1120 /* 1000base-X is designed for use media-side for Fibre
1121 * connections, and thus the Autoneg bit needs to be
1122 * taken into account. We also do this for 2500base-X
1123 * as well, but drivers may not support this, so may
1124 * need to override this.
1125 */
1126 if (!phylink_autoneg_inband(mode))
1127 neg_mode = PHYLINK_PCS_NEG_OUTBAND;
1128 else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
1129 advertising))
1130 neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED;
1131 else
1132 neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED;
1133 break;
1134
1135 default:
1136 neg_mode = PHYLINK_PCS_NEG_NONE;
1137 break;
1138 }
1139
1140 return neg_mode;
1141}
1142
1143static void phylink_major_config(struct phylink *pl, bool restart,
1144 const struct phylink_link_state *state)
1145{
1146 struct phylink_pcs *pcs = NULL;
1147 bool pcs_changed = false;
1148 unsigned int rate_kbd;
1149 unsigned int neg_mode;
1150 int err;
1151
1152 phylink_dbg(pl, "major config %s\n", phy_modes(state->interface));
1153
1154 pl->pcs_neg_mode = phylink_pcs_neg_mode(pl->cur_link_an_mode,
1155 state->interface,
1156 state->advertising);
1157
1158 if (pl->using_mac_select_pcs) {
1159 pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface);
1160 if (IS_ERR(pcs)) {
1161 phylink_err(pl,
1162 "mac_select_pcs unexpectedly failed: %pe\n",
1163 pcs);
1164 return;
1165 }
1166
1167 pcs_changed = pcs && pl->pcs != pcs;
1168 }
1169
1170 phylink_pcs_poll_stop(pl);
1171
1172 if (pl->mac_ops->mac_prepare) {
1173 err = pl->mac_ops->mac_prepare(pl->config, pl->cur_link_an_mode,
1174 state->interface);
1175 if (err < 0) {
1176 phylink_err(pl, "mac_prepare failed: %pe\n",
1177 ERR_PTR(err));
1178 return;
1179 }
1180 }
1181
1182 /* If we have a new PCS, switch to the new PCS after preparing the MAC
1183 * for the change.
1184 */
1185 if (pcs_changed) {
1186 phylink_pcs_disable(pl->pcs);
1187
1188 if (pl->pcs)
1189 pl->pcs->phylink = NULL;
1190
1191 pcs->phylink = pl;
1192
1193 pl->pcs = pcs;
1194 }
1195
1196 if (pl->pcs)
1197 phylink_pcs_pre_config(pl->pcs, state->interface);
1198
1199 phylink_mac_config(pl, state);
1200
1201 if (pl->pcs)
1202 phylink_pcs_post_config(pl->pcs, state->interface);
1203
1204 if (pl->pcs_state == PCS_STATE_STARTING || pcs_changed)
1205 phylink_pcs_enable(pl->pcs);
1206
1207 neg_mode = pl->cur_link_an_mode;
1208 if (pl->pcs && pl->pcs->neg_mode)
1209 neg_mode = pl->pcs_neg_mode;
1210
1211 err = phylink_pcs_config(pl->pcs, neg_mode, state,
1212 !!(pl->link_config.pause & MLO_PAUSE_AN));
1213 if (err < 0)
1214 phylink_err(pl, "pcs_config failed: %pe\n",
1215 ERR_PTR(err));
1216 else if (err > 0)
1217 restart = true;
1218
1219 if (restart)
1220 phylink_pcs_an_restart(pl);
1221
1222 if (pl->mac_ops->mac_finish) {
1223 err = pl->mac_ops->mac_finish(pl->config, pl->cur_link_an_mode,
1224 state->interface);
1225 if (err < 0)
1226 phylink_err(pl, "mac_finish failed: %pe\n",
1227 ERR_PTR(err));
1228 }
1229
1230 if (pl->sfp_bus) {
1231 rate_kbd = phylink_interface_signal_rate(state->interface);
1232 if (rate_kbd)
1233 sfp_upstream_set_signal_rate(pl->sfp_bus, rate_kbd);
1234 }
1235
1236 phylink_pcs_poll_start(pl);
1237}
1238
1239/*
1240 * Reconfigure for a change of inband advertisement.
1241 * If we have a separate PCS, we only need to call its pcs_config() method,
1242 * and then restart AN if it indicates something changed. Otherwise, we do
1243 * the full MAC reconfiguration.
1244 */
1245static int phylink_change_inband_advert(struct phylink *pl)
1246{
1247 unsigned int neg_mode;
1248 int ret;
1249
1250 if (test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state))
1251 return 0;
1252
1253 phylink_dbg(pl, "%s: mode=%s/%s adv=%*pb pause=%02x\n", __func__,
1254 phylink_an_mode_str(pl->cur_link_an_mode),
1255 phy_modes(pl->link_config.interface),
1256 __ETHTOOL_LINK_MODE_MASK_NBITS, pl->link_config.advertising,
1257 pl->link_config.pause);
1258
1259 /* Recompute the PCS neg mode */
1260 pl->pcs_neg_mode = phylink_pcs_neg_mode(pl->cur_link_an_mode,
1261 pl->link_config.interface,
1262 pl->link_config.advertising);
1263
1264 neg_mode = pl->cur_link_an_mode;
1265 if (pl->pcs->neg_mode)
1266 neg_mode = pl->pcs_neg_mode;
1267
1268 /* Modern PCS-based method; update the advert at the PCS, and
1269 * restart negotiation if the pcs_config() helper indicates that
1270 * the programmed advertisement has changed.
1271 */
1272 ret = phylink_pcs_config(pl->pcs, neg_mode, &pl->link_config,
1273 !!(pl->link_config.pause & MLO_PAUSE_AN));
1274 if (ret < 0)
1275 return ret;
1276
1277 if (ret > 0)
1278 phylink_pcs_an_restart(pl);
1279
1280 return 0;
1281}
1282
1283static void phylink_mac_pcs_get_state(struct phylink *pl,
1284 struct phylink_link_state *state)
1285{
1286 linkmode_copy(state->advertising, pl->link_config.advertising);
1287 linkmode_zero(state->lp_advertising);
1288 state->interface = pl->link_config.interface;
1289 state->rate_matching = pl->link_config.rate_matching;
1290 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
1291 state->advertising)) {
1292 state->speed = SPEED_UNKNOWN;
1293 state->duplex = DUPLEX_UNKNOWN;
1294 state->pause = MLO_PAUSE_NONE;
1295 } else {
1296 state->speed = pl->link_config.speed;
1297 state->duplex = pl->link_config.duplex;
1298 state->pause = pl->link_config.pause;
1299 }
1300 state->an_complete = 0;
1301 state->link = 1;
1302
1303 if (pl->pcs)
1304 pl->pcs->ops->pcs_get_state(pl->pcs, state);
1305 else
1306 state->link = 0;
1307}
1308
1309/* The fixed state is... fixed except for the link state,
1310 * which may be determined by a GPIO or a callback.
1311 */
1312static void phylink_get_fixed_state(struct phylink *pl,
1313 struct phylink_link_state *state)
1314{
1315 *state = pl->link_config;
1316 if (pl->config->get_fixed_state)
1317 pl->config->get_fixed_state(pl->config, state);
1318 else if (pl->link_gpio)
1319 state->link = !!gpiod_get_value_cansleep(pl->link_gpio);
1320
1321 state->pause = MLO_PAUSE_NONE;
1322 phylink_resolve_an_pause(state);
1323}
1324
1325static void phylink_mac_initial_config(struct phylink *pl, bool force_restart)
1326{
1327 struct phylink_link_state link_state;
1328
1329 switch (pl->cur_link_an_mode) {
1330 case MLO_AN_PHY:
1331 link_state = pl->phy_state;
1332 break;
1333
1334 case MLO_AN_FIXED:
1335 phylink_get_fixed_state(pl, &link_state);
1336 break;
1337
1338 case MLO_AN_INBAND:
1339 link_state = pl->link_config;
1340 if (link_state.interface == PHY_INTERFACE_MODE_SGMII)
1341 link_state.pause = MLO_PAUSE_NONE;
1342 break;
1343
1344 default: /* can't happen */
1345 return;
1346 }
1347
1348 link_state.link = false;
1349
1350 phylink_apply_manual_flow(pl, &link_state);
1351 phylink_major_config(pl, force_restart, &link_state);
1352}
1353
1354static const char *phylink_pause_to_str(int pause)
1355{
1356 switch (pause & MLO_PAUSE_TXRX_MASK) {
1357 case MLO_PAUSE_TX | MLO_PAUSE_RX:
1358 return "rx/tx";
1359 case MLO_PAUSE_TX:
1360 return "tx";
1361 case MLO_PAUSE_RX:
1362 return "rx";
1363 default:
1364 return "off";
1365 }
1366}
1367
1368static void phylink_link_up(struct phylink *pl,
1369 struct phylink_link_state link_state)
1370{
1371 struct net_device *ndev = pl->netdev;
1372 unsigned int neg_mode;
1373 int speed, duplex;
1374 bool rx_pause;
1375
1376 speed = link_state.speed;
1377 duplex = link_state.duplex;
1378 rx_pause = !!(link_state.pause & MLO_PAUSE_RX);
1379
1380 switch (link_state.rate_matching) {
1381 case RATE_MATCH_PAUSE:
1382 /* The PHY is doing rate matchion from the media rate (in
1383 * the link_state) to the interface speed, and will send
1384 * pause frames to the MAC to limit its transmission speed.
1385 */
1386 speed = phylink_interface_max_speed(link_state.interface);
1387 duplex = DUPLEX_FULL;
1388 rx_pause = true;
1389 break;
1390
1391 case RATE_MATCH_CRS:
1392 /* The PHY is doing rate matchion from the media rate (in
1393 * the link_state) to the interface speed, and will cause
1394 * collisions to the MAC to limit its transmission speed.
1395 */
1396 speed = phylink_interface_max_speed(link_state.interface);
1397 duplex = DUPLEX_HALF;
1398 break;
1399 }
1400
1401 pl->cur_interface = link_state.interface;
1402
1403 neg_mode = pl->cur_link_an_mode;
1404 if (pl->pcs && pl->pcs->neg_mode)
1405 neg_mode = pl->pcs_neg_mode;
1406
1407 phylink_pcs_link_up(pl->pcs, neg_mode, pl->cur_interface, speed,
1408 duplex);
1409
1410 pl->mac_ops->mac_link_up(pl->config, pl->phydev, pl->cur_link_an_mode,
1411 pl->cur_interface, speed, duplex,
1412 !!(link_state.pause & MLO_PAUSE_TX), rx_pause);
1413
1414 if (ndev)
1415 netif_carrier_on(ndev);
1416
1417 phylink_info(pl,
1418 "Link is Up - %s/%s - flow control %s\n",
1419 phy_speed_to_str(link_state.speed),
1420 phy_duplex_to_str(link_state.duplex),
1421 phylink_pause_to_str(link_state.pause));
1422}
1423
1424static void phylink_link_down(struct phylink *pl)
1425{
1426 struct net_device *ndev = pl->netdev;
1427
1428 if (ndev)
1429 netif_carrier_off(ndev);
1430 pl->mac_ops->mac_link_down(pl->config, pl->cur_link_an_mode,
1431 pl->cur_interface);
1432 phylink_info(pl, "Link is Down\n");
1433}
1434
1435static void phylink_resolve(struct work_struct *w)
1436{
1437 struct phylink *pl = container_of(w, struct phylink, resolve);
1438 struct phylink_link_state link_state;
1439 struct net_device *ndev = pl->netdev;
1440 bool mac_config = false;
1441 bool retrigger = false;
1442 bool cur_link_state;
1443
1444 mutex_lock(&pl->state_mutex);
1445 if (pl->netdev)
1446 cur_link_state = netif_carrier_ok(ndev);
1447 else
1448 cur_link_state = pl->old_link_state;
1449
1450 if (pl->phylink_disable_state) {
1451 pl->mac_link_dropped = false;
1452 link_state.link = false;
1453 } else if (pl->mac_link_dropped) {
1454 link_state.link = false;
1455 retrigger = true;
1456 } else {
1457 switch (pl->cur_link_an_mode) {
1458 case MLO_AN_PHY:
1459 link_state = pl->phy_state;
1460 phylink_apply_manual_flow(pl, &link_state);
1461 mac_config = link_state.link;
1462 break;
1463
1464 case MLO_AN_FIXED:
1465 phylink_get_fixed_state(pl, &link_state);
1466 mac_config = link_state.link;
1467 break;
1468
1469 case MLO_AN_INBAND:
1470 phylink_mac_pcs_get_state(pl, &link_state);
1471
1472 /* The PCS may have a latching link-fail indicator.
1473 * If the link was up, bring the link down and
1474 * re-trigger the resolve. Otherwise, re-read the
1475 * PCS state to get the current status of the link.
1476 */
1477 if (!link_state.link) {
1478 if (cur_link_state)
1479 retrigger = true;
1480 else
1481 phylink_mac_pcs_get_state(pl,
1482 &link_state);
1483 }
1484
1485 /* If we have a phy, the "up" state is the union of
1486 * both the PHY and the MAC
1487 */
1488 if (pl->phydev)
1489 link_state.link &= pl->phy_state.link;
1490
1491 /* Only update if the PHY link is up */
1492 if (pl->phydev && pl->phy_state.link) {
1493 /* If the interface has changed, force a
1494 * link down event if the link isn't already
1495 * down, and re-resolve.
1496 */
1497 if (link_state.interface !=
1498 pl->phy_state.interface) {
1499 retrigger = true;
1500 link_state.link = false;
1501 }
1502 link_state.interface = pl->phy_state.interface;
1503
1504 /* If we are doing rate matching, then the
1505 * link speed/duplex comes from the PHY
1506 */
1507 if (pl->phy_state.rate_matching) {
1508 link_state.rate_matching =
1509 pl->phy_state.rate_matching;
1510 link_state.speed = pl->phy_state.speed;
1511 link_state.duplex =
1512 pl->phy_state.duplex;
1513 }
1514
1515 /* If we have a PHY, we need to update with
1516 * the PHY flow control bits.
1517 */
1518 link_state.pause = pl->phy_state.pause;
1519 mac_config = true;
1520 }
1521 phylink_apply_manual_flow(pl, &link_state);
1522 break;
1523 }
1524 }
1525
1526 if (mac_config) {
1527 if (link_state.interface != pl->link_config.interface) {
1528 /* The interface has changed, force the link down and
1529 * then reconfigure.
1530 */
1531 if (cur_link_state) {
1532 phylink_link_down(pl);
1533 cur_link_state = false;
1534 }
1535 phylink_major_config(pl, false, &link_state);
1536 pl->link_config.interface = link_state.interface;
1537 }
1538 }
1539
1540 if (link_state.link != cur_link_state) {
1541 pl->old_link_state = link_state.link;
1542 if (!link_state.link)
1543 phylink_link_down(pl);
1544 else
1545 phylink_link_up(pl, link_state);
1546 }
1547 if (!link_state.link && retrigger) {
1548 pl->mac_link_dropped = false;
1549 queue_work(system_power_efficient_wq, &pl->resolve);
1550 }
1551 mutex_unlock(&pl->state_mutex);
1552}
1553
1554static void phylink_run_resolve(struct phylink *pl)
1555{
1556 if (!pl->phylink_disable_state)
1557 queue_work(system_power_efficient_wq, &pl->resolve);
1558}
1559
1560static void phylink_run_resolve_and_disable(struct phylink *pl, int bit)
1561{
1562 unsigned long state = pl->phylink_disable_state;
1563
1564 set_bit(bit, &pl->phylink_disable_state);
1565 if (state == 0) {
1566 queue_work(system_power_efficient_wq, &pl->resolve);
1567 flush_work(&pl->resolve);
1568 }
1569}
1570
1571static void phylink_enable_and_run_resolve(struct phylink *pl, int bit)
1572{
1573 clear_bit(bit, &pl->phylink_disable_state);
1574 phylink_run_resolve(pl);
1575}
1576
1577static void phylink_fixed_poll(struct timer_list *t)
1578{
1579 struct phylink *pl = container_of(t, struct phylink, link_poll);
1580
1581 mod_timer(t, jiffies + HZ);
1582
1583 phylink_run_resolve(pl);
1584}
1585
1586static const struct sfp_upstream_ops sfp_phylink_ops;
1587
1588static int phylink_register_sfp(struct phylink *pl,
1589 const struct fwnode_handle *fwnode)
1590{
1591 struct sfp_bus *bus;
1592 int ret;
1593
1594 if (!fwnode)
1595 return 0;
1596
1597 bus = sfp_bus_find_fwnode(fwnode);
1598 if (IS_ERR(bus)) {
1599 phylink_err(pl, "unable to attach SFP bus: %pe\n", bus);
1600 return PTR_ERR(bus);
1601 }
1602
1603 pl->sfp_bus = bus;
1604
1605 ret = sfp_bus_add_upstream(bus, pl, &sfp_phylink_ops);
1606 sfp_bus_put(bus);
1607
1608 return ret;
1609}
1610
1611/**
1612 * phylink_create() - create a phylink instance
1613 * @config: a pointer to the target &struct phylink_config
1614 * @fwnode: a pointer to a &struct fwnode_handle describing the network
1615 * interface
1616 * @iface: the desired link mode defined by &typedef phy_interface_t
1617 * @mac_ops: a pointer to a &struct phylink_mac_ops for the MAC.
1618 *
1619 * Create a new phylink instance, and parse the link parameters found in @np.
1620 * This will parse in-band modes, fixed-link or SFP configuration.
1621 *
1622 * Note: the rtnl lock must not be held when calling this function.
1623 *
1624 * Returns a pointer to a &struct phylink, or an error-pointer value. Users
1625 * must use IS_ERR() to check for errors from this function.
1626 */
1627struct phylink *phylink_create(struct phylink_config *config,
1628 const struct fwnode_handle *fwnode,
1629 phy_interface_t iface,
1630 const struct phylink_mac_ops *mac_ops)
1631{
1632 bool using_mac_select_pcs = false;
1633 struct phylink *pl;
1634 int ret;
1635
1636 /* Validate the supplied configuration */
1637 if (phy_interface_empty(config->supported_interfaces)) {
1638 dev_err(config->dev,
1639 "phylink: error: empty supported_interfaces\n");
1640 return ERR_PTR(-EINVAL);
1641 }
1642
1643 if (mac_ops->mac_select_pcs &&
1644 mac_ops->mac_select_pcs(config, PHY_INTERFACE_MODE_NA) !=
1645 ERR_PTR(-EOPNOTSUPP))
1646 using_mac_select_pcs = true;
1647
1648 pl = kzalloc(sizeof(*pl), GFP_KERNEL);
1649 if (!pl)
1650 return ERR_PTR(-ENOMEM);
1651
1652 mutex_init(&pl->state_mutex);
1653 INIT_WORK(&pl->resolve, phylink_resolve);
1654
1655 pl->config = config;
1656 if (config->type == PHYLINK_NETDEV) {
1657 pl->netdev = to_net_dev(config->dev);
1658 netif_carrier_off(pl->netdev);
1659 } else if (config->type == PHYLINK_DEV) {
1660 pl->dev = config->dev;
1661 } else {
1662 kfree(pl);
1663 return ERR_PTR(-EINVAL);
1664 }
1665
1666 pl->using_mac_select_pcs = using_mac_select_pcs;
1667 pl->phy_state.interface = iface;
1668 pl->link_interface = iface;
1669 if (iface == PHY_INTERFACE_MODE_MOCA)
1670 pl->link_port = PORT_BNC;
1671 else
1672 pl->link_port = PORT_MII;
1673 pl->link_config.interface = iface;
1674 pl->link_config.pause = MLO_PAUSE_AN;
1675 pl->link_config.speed = SPEED_UNKNOWN;
1676 pl->link_config.duplex = DUPLEX_UNKNOWN;
1677 pl->pcs_state = PCS_STATE_DOWN;
1678 pl->mac_ops = mac_ops;
1679 __set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
1680 timer_setup(&pl->link_poll, phylink_fixed_poll, 0);
1681
1682 linkmode_fill(pl->supported);
1683 linkmode_copy(pl->link_config.advertising, pl->supported);
1684 phylink_validate(pl, pl->supported, &pl->link_config);
1685
1686 ret = phylink_parse_mode(pl, fwnode);
1687 if (ret < 0) {
1688 kfree(pl);
1689 return ERR_PTR(ret);
1690 }
1691
1692 if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
1693 ret = phylink_parse_fixedlink(pl, fwnode);
1694 if (ret < 0) {
1695 kfree(pl);
1696 return ERR_PTR(ret);
1697 }
1698 }
1699
1700 pl->cur_link_an_mode = pl->cfg_link_an_mode;
1701
1702 ret = phylink_register_sfp(pl, fwnode);
1703 if (ret < 0) {
1704 kfree(pl);
1705 return ERR_PTR(ret);
1706 }
1707
1708 return pl;
1709}
1710EXPORT_SYMBOL_GPL(phylink_create);
1711
1712/**
1713 * phylink_destroy() - cleanup and destroy the phylink instance
1714 * @pl: a pointer to a &struct phylink returned from phylink_create()
1715 *
1716 * Destroy a phylink instance. Any PHY that has been attached must have been
1717 * cleaned up via phylink_disconnect_phy() prior to calling this function.
1718 *
1719 * Note: the rtnl lock must not be held when calling this function.
1720 */
1721void phylink_destroy(struct phylink *pl)
1722{
1723 sfp_bus_del_upstream(pl->sfp_bus);
1724 if (pl->link_gpio)
1725 gpiod_put(pl->link_gpio);
1726
1727 cancel_work_sync(&pl->resolve);
1728 kfree(pl);
1729}
1730EXPORT_SYMBOL_GPL(phylink_destroy);
1731
1732/**
1733 * phylink_expects_phy() - Determine if phylink expects a phy to be attached
1734 * @pl: a pointer to a &struct phylink returned from phylink_create()
1735 *
1736 * When using fixed-link mode, or in-band mode with 1000base-X or 2500base-X,
1737 * no PHY is needed.
1738 *
1739 * Returns true if phylink will be expecting a PHY.
1740 */
1741bool phylink_expects_phy(struct phylink *pl)
1742{
1743 if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
1744 (pl->cfg_link_an_mode == MLO_AN_INBAND &&
1745 phy_interface_mode_is_8023z(pl->link_config.interface)))
1746 return false;
1747 return true;
1748}
1749EXPORT_SYMBOL_GPL(phylink_expects_phy);
1750
1751static void phylink_phy_change(struct phy_device *phydev, bool up)
1752{
1753 struct phylink *pl = phydev->phylink;
1754 bool tx_pause, rx_pause;
1755
1756 phy_get_pause(phydev, &tx_pause, &rx_pause);
1757
1758 mutex_lock(&pl->state_mutex);
1759 pl->phy_state.speed = phydev->speed;
1760 pl->phy_state.duplex = phydev->duplex;
1761 pl->phy_state.rate_matching = phydev->rate_matching;
1762 pl->phy_state.pause = MLO_PAUSE_NONE;
1763 if (tx_pause)
1764 pl->phy_state.pause |= MLO_PAUSE_TX;
1765 if (rx_pause)
1766 pl->phy_state.pause |= MLO_PAUSE_RX;
1767 pl->phy_state.interface = phydev->interface;
1768 pl->phy_state.link = up;
1769 mutex_unlock(&pl->state_mutex);
1770
1771 phylink_run_resolve(pl);
1772
1773 phylink_dbg(pl, "phy link %s %s/%s/%s/%s/%s\n", up ? "up" : "down",
1774 phy_modes(phydev->interface),
1775 phy_speed_to_str(phydev->speed),
1776 phy_duplex_to_str(phydev->duplex),
1777 phy_rate_matching_to_str(phydev->rate_matching),
1778 phylink_pause_to_str(pl->phy_state.pause));
1779}
1780
1781static int phylink_validate_phy(struct phylink *pl, struct phy_device *phy,
1782 unsigned long *supported,
1783 struct phylink_link_state *state)
1784{
1785 DECLARE_PHY_INTERFACE_MASK(interfaces);
1786
1787 /* If the PHY provides a bitmap of the interfaces it will be using
1788 * depending on the negotiated media speeds, use this to validate
1789 * which ethtool link modes can be used.
1790 */
1791 if (!phy_interface_empty(phy->possible_interfaces)) {
1792 /* We only care about the union of the PHY's interfaces and
1793 * those which the host supports.
1794 */
1795 phy_interface_and(interfaces, phy->possible_interfaces,
1796 pl->config->supported_interfaces);
1797
1798 if (phy_interface_empty(interfaces)) {
1799 phylink_err(pl, "PHY has no common interfaces\n");
1800 return -EINVAL;
1801 }
1802
1803 if (phy_on_sfp(phy)) {
1804 /* If the PHY is on a SFP, limit the interfaces to
1805 * those that can be used with a SFP module.
1806 */
1807 phy_interface_and(interfaces, interfaces,
1808 phylink_sfp_interfaces);
1809
1810 if (phy_interface_empty(interfaces)) {
1811 phylink_err(pl, "SFP PHY's possible interfaces becomes empty\n");
1812 return -EINVAL;
1813 }
1814 }
1815
1816 phylink_dbg(pl, "PHY %s uses interfaces %*pbl, validating %*pbl\n",
1817 phydev_name(phy),
1818 (int)PHY_INTERFACE_MODE_MAX,
1819 phy->possible_interfaces,
1820 (int)PHY_INTERFACE_MODE_MAX, interfaces);
1821
1822 return phylink_validate_mask(pl, phy, supported, state,
1823 interfaces);
1824 }
1825
1826 /* Check whether we would use rate matching for the proposed interface
1827 * mode.
1828 */
1829 state->rate_matching = phy_get_rate_matching(phy, state->interface);
1830
1831 /* Clause 45 PHYs may switch their Serdes lane between, e.g. 10GBASE-R,
1832 * 5GBASE-R, 2500BASE-X and SGMII if they are not using rate matching.
1833 * For some interface modes (e.g. RXAUI, XAUI and USXGMII) switching
1834 * their Serdes is either unnecessary or not reasonable.
1835 *
1836 * For these which switch interface modes, we really need to know which
1837 * interface modes the PHY supports to properly work out which ethtool
1838 * linkmodes can be supported. For now, as a work-around, we validate
1839 * against all interface modes, which may lead to more ethtool link
1840 * modes being advertised than are actually supported.
1841 */
1842 if (phy->is_c45 && state->rate_matching == RATE_MATCH_NONE &&
1843 state->interface != PHY_INTERFACE_MODE_RXAUI &&
1844 state->interface != PHY_INTERFACE_MODE_XAUI &&
1845 state->interface != PHY_INTERFACE_MODE_USXGMII)
1846 state->interface = PHY_INTERFACE_MODE_NA;
1847
1848 return phylink_validate(pl, supported, state);
1849}
1850
1851static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
1852 phy_interface_t interface)
1853{
1854 struct phylink_link_state config;
1855 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
1856 char *irq_str;
1857 int ret;
1858
1859 /*
1860 * This is the new way of dealing with flow control for PHYs,
1861 * as described by Timur Tabi in commit 529ed1275263 ("net: phy:
1862 * phy drivers should not set SUPPORTED_[Asym_]Pause") except
1863 * using our validate call to the MAC, we rely upon the MAC
1864 * clearing the bits from both supported and advertising fields.
1865 */
1866 phy_support_asym_pause(phy);
1867
1868 memset(&config, 0, sizeof(config));
1869 linkmode_copy(supported, phy->supported);
1870 linkmode_copy(config.advertising, phy->advertising);
1871 config.interface = interface;
1872
1873 ret = phylink_validate_phy(pl, phy, supported, &config);
1874 if (ret) {
1875 phylink_warn(pl, "validation of %s with support %*pb and advertisement %*pb failed: %pe\n",
1876 phy_modes(config.interface),
1877 __ETHTOOL_LINK_MODE_MASK_NBITS, phy->supported,
1878 __ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising,
1879 ERR_PTR(ret));
1880 return ret;
1881 }
1882
1883 phy->phylink = pl;
1884 phy->phy_link_change = phylink_phy_change;
1885
1886 irq_str = phy_attached_info_irq(phy);
1887 phylink_info(pl,
1888 "PHY [%s] driver [%s] (irq=%s)\n",
1889 dev_name(&phy->mdio.dev), phy->drv->name, irq_str);
1890 kfree(irq_str);
1891
1892 mutex_lock(&phy->lock);
1893 mutex_lock(&pl->state_mutex);
1894 pl->phydev = phy;
1895 pl->phy_state.interface = interface;
1896 pl->phy_state.pause = MLO_PAUSE_NONE;
1897 pl->phy_state.speed = SPEED_UNKNOWN;
1898 pl->phy_state.duplex = DUPLEX_UNKNOWN;
1899 pl->phy_state.rate_matching = RATE_MATCH_NONE;
1900 linkmode_copy(pl->supported, supported);
1901 linkmode_copy(pl->link_config.advertising, config.advertising);
1902
1903 /* Restrict the phy advertisement according to the MAC support. */
1904 linkmode_copy(phy->advertising, config.advertising);
1905 mutex_unlock(&pl->state_mutex);
1906 mutex_unlock(&phy->lock);
1907
1908 phylink_dbg(pl,
1909 "phy: %s setting supported %*pb advertising %*pb\n",
1910 phy_modes(interface),
1911 __ETHTOOL_LINK_MODE_MASK_NBITS, pl->supported,
1912 __ETHTOOL_LINK_MODE_MASK_NBITS, phy->advertising);
1913
1914 if (phy_interrupt_is_valid(phy))
1915 phy_request_interrupt(phy);
1916
1917 if (pl->config->mac_managed_pm)
1918 phy->mac_managed_pm = true;
1919
1920 return 0;
1921}
1922
1923static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
1924 phy_interface_t interface)
1925{
1926 if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED ||
1927 (pl->cfg_link_an_mode == MLO_AN_INBAND &&
1928 phy_interface_mode_is_8023z(interface) && !pl->sfp_bus)))
1929 return -EINVAL;
1930
1931 if (pl->phydev)
1932 return -EBUSY;
1933
1934 return phy_attach_direct(pl->netdev, phy, 0, interface);
1935}
1936
1937/**
1938 * phylink_connect_phy() - connect a PHY to the phylink instance
1939 * @pl: a pointer to a &struct phylink returned from phylink_create()
1940 * @phy: a pointer to a &struct phy_device.
1941 *
1942 * Connect @phy to the phylink instance specified by @pl by calling
1943 * phy_attach_direct(). Configure the @phy according to the MAC driver's
1944 * capabilities, start the PHYLIB state machine and enable any interrupts
1945 * that the PHY supports.
1946 *
1947 * This updates the phylink's ethtool supported and advertising link mode
1948 * masks.
1949 *
1950 * Returns 0 on success or a negative errno.
1951 */
1952int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
1953{
1954 int ret;
1955
1956 /* Use PHY device/driver interface */
1957 if (pl->link_interface == PHY_INTERFACE_MODE_NA) {
1958 pl->link_interface = phy->interface;
1959 pl->link_config.interface = pl->link_interface;
1960 }
1961
1962 ret = phylink_attach_phy(pl, phy, pl->link_interface);
1963 if (ret < 0)
1964 return ret;
1965
1966 ret = phylink_bringup_phy(pl, phy, pl->link_config.interface);
1967 if (ret)
1968 phy_detach(phy);
1969
1970 return ret;
1971}
1972EXPORT_SYMBOL_GPL(phylink_connect_phy);
1973
1974/**
1975 * phylink_of_phy_connect() - connect the PHY specified in the DT mode.
1976 * @pl: a pointer to a &struct phylink returned from phylink_create()
1977 * @dn: a pointer to a &struct device_node.
1978 * @flags: PHY-specific flags to communicate to the PHY device driver
1979 *
1980 * Connect the phy specified in the device node @dn to the phylink instance
1981 * specified by @pl. Actions specified in phylink_connect_phy() will be
1982 * performed.
1983 *
1984 * Returns 0 on success or a negative errno.
1985 */
1986int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
1987 u32 flags)
1988{
1989 return phylink_fwnode_phy_connect(pl, of_fwnode_handle(dn), flags);
1990}
1991EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
1992
1993/**
1994 * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.
1995 * @pl: a pointer to a &struct phylink returned from phylink_create()
1996 * @fwnode: a pointer to a &struct fwnode_handle.
1997 * @flags: PHY-specific flags to communicate to the PHY device driver
1998 *
1999 * Connect the phy specified @fwnode to the phylink instance specified
2000 * by @pl.
2001 *
2002 * Returns 0 on success or a negative errno.
2003 */
2004int phylink_fwnode_phy_connect(struct phylink *pl,
2005 const struct fwnode_handle *fwnode,
2006 u32 flags)
2007{
2008 struct fwnode_handle *phy_fwnode;
2009 struct phy_device *phy_dev;
2010 int ret;
2011
2012 /* Fixed links and 802.3z are handled without needing a PHY */
2013 if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
2014 (pl->cfg_link_an_mode == MLO_AN_INBAND &&
2015 phy_interface_mode_is_8023z(pl->link_interface)))
2016 return 0;
2017
2018 phy_fwnode = fwnode_get_phy_node(fwnode);
2019 if (IS_ERR(phy_fwnode)) {
2020 if (pl->cfg_link_an_mode == MLO_AN_PHY)
2021 return -ENODEV;
2022 return 0;
2023 }
2024
2025 phy_dev = fwnode_phy_find_device(phy_fwnode);
2026 /* We're done with the phy_node handle */
2027 fwnode_handle_put(phy_fwnode);
2028 if (!phy_dev)
2029 return -ENODEV;
2030
2031 /* Use PHY device/driver interface */
2032 if (pl->link_interface == PHY_INTERFACE_MODE_NA) {
2033 pl->link_interface = phy_dev->interface;
2034 pl->link_config.interface = pl->link_interface;
2035 }
2036
2037 ret = phy_attach_direct(pl->netdev, phy_dev, flags,
2038 pl->link_interface);
2039 phy_device_free(phy_dev);
2040 if (ret)
2041 return ret;
2042
2043 ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
2044 if (ret)
2045 phy_detach(phy_dev);
2046
2047 return ret;
2048}
2049EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect);
2050
2051/**
2052 * phylink_disconnect_phy() - disconnect any PHY attached to the phylink
2053 * instance.
2054 * @pl: a pointer to a &struct phylink returned from phylink_create()
2055 *
2056 * Disconnect any current PHY from the phylink instance described by @pl.
2057 */
2058void phylink_disconnect_phy(struct phylink *pl)
2059{
2060 struct phy_device *phy;
2061
2062 ASSERT_RTNL();
2063
2064 phy = pl->phydev;
2065 if (phy) {
2066 mutex_lock(&phy->lock);
2067 mutex_lock(&pl->state_mutex);
2068 pl->phydev = NULL;
2069 mutex_unlock(&pl->state_mutex);
2070 mutex_unlock(&phy->lock);
2071 flush_work(&pl->resolve);
2072
2073 phy_disconnect(phy);
2074 }
2075}
2076EXPORT_SYMBOL_GPL(phylink_disconnect_phy);
2077
2078static void phylink_link_changed(struct phylink *pl, bool up, const char *what)
2079{
2080 if (!up)
2081 pl->mac_link_dropped = true;
2082 phylink_run_resolve(pl);
2083 phylink_dbg(pl, "%s link %s\n", what, up ? "up" : "down");
2084}
2085
2086/**
2087 * phylink_mac_change() - notify phylink of a change in MAC state
2088 * @pl: a pointer to a &struct phylink returned from phylink_create()
2089 * @up: indicates whether the link is currently up.
2090 *
2091 * The MAC driver should call this driver when the state of its link
2092 * changes (eg, link failure, new negotiation results, etc.)
2093 */
2094void phylink_mac_change(struct phylink *pl, bool up)
2095{
2096 phylink_link_changed(pl, up, "mac");
2097}
2098EXPORT_SYMBOL_GPL(phylink_mac_change);
2099
2100/**
2101 * phylink_pcs_change() - notify phylink of a change to PCS link state
2102 * @pcs: pointer to &struct phylink_pcs
2103 * @up: indicates whether the link is currently up.
2104 *
2105 * The PCS driver should call this when the state of its link changes
2106 * (e.g. link failure, new negotiation results, etc.) Note: it should
2107 * not determine "up" by reading the BMSR. If in doubt about the link
2108 * state at interrupt time, then pass true if pcs_get_state() returns
2109 * the latched link-down state, otherwise pass false.
2110 */
2111void phylink_pcs_change(struct phylink_pcs *pcs, bool up)
2112{
2113 struct phylink *pl = pcs->phylink;
2114
2115 if (pl)
2116 phylink_link_changed(pl, up, "pcs");
2117}
2118EXPORT_SYMBOL_GPL(phylink_pcs_change);
2119
2120static irqreturn_t phylink_link_handler(int irq, void *data)
2121{
2122 struct phylink *pl = data;
2123
2124 phylink_run_resolve(pl);
2125
2126 return IRQ_HANDLED;
2127}
2128
2129/**
2130 * phylink_start() - start a phylink instance
2131 * @pl: a pointer to a &struct phylink returned from phylink_create()
2132 *
2133 * Start the phylink instance specified by @pl, configuring the MAC for the
2134 * desired link mode(s) and negotiation style. This should be called from the
2135 * network device driver's &struct net_device_ops ndo_open() method.
2136 */
2137void phylink_start(struct phylink *pl)
2138{
2139 bool poll = false;
2140
2141 ASSERT_RTNL();
2142
2143 phylink_info(pl, "configuring for %s/%s link mode\n",
2144 phylink_an_mode_str(pl->cur_link_an_mode),
2145 phy_modes(pl->link_config.interface));
2146
2147 /* Always set the carrier off */
2148 if (pl->netdev)
2149 netif_carrier_off(pl->netdev);
2150
2151 pl->pcs_state = PCS_STATE_STARTING;
2152
2153 /* Apply the link configuration to the MAC when starting. This allows
2154 * a fixed-link to start with the correct parameters, and also
2155 * ensures that we set the appropriate advertisement for Serdes links.
2156 *
2157 * Restart autonegotiation if using 802.3z to ensure that the link
2158 * parameters are properly negotiated. This is necessary for DSA
2159 * switches using 802.3z negotiation to ensure they see our modes.
2160 */
2161 phylink_mac_initial_config(pl, true);
2162
2163 pl->pcs_state = PCS_STATE_STARTED;
2164
2165 phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_STOPPED);
2166
2167 if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
2168 int irq = gpiod_to_irq(pl->link_gpio);
2169
2170 if (irq > 0) {
2171 if (!request_irq(irq, phylink_link_handler,
2172 IRQF_TRIGGER_RISING |
2173 IRQF_TRIGGER_FALLING,
2174 "netdev link", pl))
2175 pl->link_irq = irq;
2176 else
2177 irq = 0;
2178 }
2179 if (irq <= 0)
2180 poll = true;
2181 }
2182
2183 if (pl->cfg_link_an_mode == MLO_AN_FIXED)
2184 poll |= pl->config->poll_fixed_state;
2185
2186 if (poll)
2187 mod_timer(&pl->link_poll, jiffies + HZ);
2188 if (pl->phydev)
2189 phy_start(pl->phydev);
2190 if (pl->sfp_bus)
2191 sfp_upstream_start(pl->sfp_bus);
2192}
2193EXPORT_SYMBOL_GPL(phylink_start);
2194
2195/**
2196 * phylink_stop() - stop a phylink instance
2197 * @pl: a pointer to a &struct phylink returned from phylink_create()
2198 *
2199 * Stop the phylink instance specified by @pl. This should be called from the
2200 * network device driver's &struct net_device_ops ndo_stop() method. The
2201 * network device's carrier state should not be changed prior to calling this
2202 * function.
2203 *
2204 * This will synchronously bring down the link if the link is not already
2205 * down (in other words, it will trigger a mac_link_down() method call.)
2206 */
2207void phylink_stop(struct phylink *pl)
2208{
2209 ASSERT_RTNL();
2210
2211 if (pl->sfp_bus)
2212 sfp_upstream_stop(pl->sfp_bus);
2213 if (pl->phydev)
2214 phy_stop(pl->phydev);
2215 del_timer_sync(&pl->link_poll);
2216 if (pl->link_irq) {
2217 free_irq(pl->link_irq, pl);
2218 pl->link_irq = 0;
2219 }
2220
2221 phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED);
2222
2223 pl->pcs_state = PCS_STATE_DOWN;
2224
2225 phylink_pcs_disable(pl->pcs);
2226}
2227EXPORT_SYMBOL_GPL(phylink_stop);
2228
2229/**
2230 * phylink_suspend() - handle a network device suspend event
2231 * @pl: a pointer to a &struct phylink returned from phylink_create()
2232 * @mac_wol: true if the MAC needs to receive packets for Wake-on-Lan
2233 *
2234 * Handle a network device suspend event. There are several cases:
2235 *
2236 * - If Wake-on-Lan is not active, we can bring down the link between
2237 * the MAC and PHY by calling phylink_stop().
2238 * - If Wake-on-Lan is active, and being handled only by the PHY, we
2239 * can also bring down the link between the MAC and PHY.
2240 * - If Wake-on-Lan is active, but being handled by the MAC, the MAC
2241 * still needs to receive packets, so we can not bring the link down.
2242 */
2243void phylink_suspend(struct phylink *pl, bool mac_wol)
2244{
2245 ASSERT_RTNL();
2246
2247 if (mac_wol && (!pl->netdev || pl->netdev->wol_enabled)) {
2248 /* Wake-on-Lan enabled, MAC handling */
2249 mutex_lock(&pl->state_mutex);
2250
2251 /* Stop the resolver bringing the link up */
2252 __set_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state);
2253
2254 /* Disable the carrier, to prevent transmit timeouts,
2255 * but one would hope all packets have been sent. This
2256 * also means phylink_resolve() will do nothing.
2257 */
2258 if (pl->netdev)
2259 netif_carrier_off(pl->netdev);
2260 else
2261 pl->old_link_state = false;
2262
2263 /* We do not call mac_link_down() here as we want the
2264 * link to remain up to receive the WoL packets.
2265 */
2266 mutex_unlock(&pl->state_mutex);
2267 } else {
2268 phylink_stop(pl);
2269 }
2270}
2271EXPORT_SYMBOL_GPL(phylink_suspend);
2272
2273/**
2274 * phylink_resume() - handle a network device resume event
2275 * @pl: a pointer to a &struct phylink returned from phylink_create()
2276 *
2277 * Undo the effects of phylink_suspend(), returning the link to an
2278 * operational state.
2279 */
2280void phylink_resume(struct phylink *pl)
2281{
2282 ASSERT_RTNL();
2283
2284 if (test_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state)) {
2285 /* Wake-on-Lan enabled, MAC handling */
2286
2287 /* Call mac_link_down() so we keep the overall state balanced.
2288 * Do this under the state_mutex lock for consistency. This
2289 * will cause a "Link Down" message to be printed during
2290 * resume, which is harmless - the true link state will be
2291 * printed when we run a resolve.
2292 */
2293 mutex_lock(&pl->state_mutex);
2294 phylink_link_down(pl);
2295 mutex_unlock(&pl->state_mutex);
2296
2297 /* Re-apply the link parameters so that all the settings get
2298 * restored to the MAC.
2299 */
2300 phylink_mac_initial_config(pl, true);
2301
2302 /* Re-enable and re-resolve the link parameters */
2303 phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_MAC_WOL);
2304 } else {
2305 phylink_start(pl);
2306 }
2307}
2308EXPORT_SYMBOL_GPL(phylink_resume);
2309
2310/**
2311 * phylink_ethtool_get_wol() - get the wake on lan parameters for the PHY
2312 * @pl: a pointer to a &struct phylink returned from phylink_create()
2313 * @wol: a pointer to &struct ethtool_wolinfo to hold the read parameters
2314 *
2315 * Read the wake on lan parameters from the PHY attached to the phylink
2316 * instance specified by @pl. If no PHY is currently attached, report no
2317 * support for wake on lan.
2318 */
2319void phylink_ethtool_get_wol(struct phylink *pl, struct ethtool_wolinfo *wol)
2320{
2321 ASSERT_RTNL();
2322
2323 wol->supported = 0;
2324 wol->wolopts = 0;
2325
2326 if (pl->phydev)
2327 phy_ethtool_get_wol(pl->phydev, wol);
2328}
2329EXPORT_SYMBOL_GPL(phylink_ethtool_get_wol);
2330
2331/**
2332 * phylink_ethtool_set_wol() - set wake on lan parameters
2333 * @pl: a pointer to a &struct phylink returned from phylink_create()
2334 * @wol: a pointer to &struct ethtool_wolinfo for the desired parameters
2335 *
2336 * Set the wake on lan parameters for the PHY attached to the phylink
2337 * instance specified by @pl. If no PHY is attached, returns %EOPNOTSUPP
2338 * error.
2339 *
2340 * Returns zero on success or negative errno code.
2341 */
2342int phylink_ethtool_set_wol(struct phylink *pl, struct ethtool_wolinfo *wol)
2343{
2344 int ret = -EOPNOTSUPP;
2345
2346 ASSERT_RTNL();
2347
2348 if (pl->phydev)
2349 ret = phy_ethtool_set_wol(pl->phydev, wol);
2350
2351 return ret;
2352}
2353EXPORT_SYMBOL_GPL(phylink_ethtool_set_wol);
2354
2355static void phylink_merge_link_mode(unsigned long *dst, const unsigned long *b)
2356{
2357 __ETHTOOL_DECLARE_LINK_MODE_MASK(mask);
2358
2359 linkmode_zero(mask);
2360 phylink_set_port_modes(mask);
2361
2362 linkmode_and(dst, dst, mask);
2363 linkmode_or(dst, dst, b);
2364}
2365
2366static void phylink_get_ksettings(const struct phylink_link_state *state,
2367 struct ethtool_link_ksettings *kset)
2368{
2369 phylink_merge_link_mode(kset->link_modes.advertising, state->advertising);
2370 linkmode_copy(kset->link_modes.lp_advertising, state->lp_advertising);
2371 if (kset->base.rate_matching == RATE_MATCH_NONE) {
2372 kset->base.speed = state->speed;
2373 kset->base.duplex = state->duplex;
2374 }
2375 kset->base.autoneg = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
2376 state->advertising) ?
2377 AUTONEG_ENABLE : AUTONEG_DISABLE;
2378}
2379
2380/**
2381 * phylink_ethtool_ksettings_get() - get the current link settings
2382 * @pl: a pointer to a &struct phylink returned from phylink_create()
2383 * @kset: a pointer to a &struct ethtool_link_ksettings to hold link settings
2384 *
2385 * Read the current link settings for the phylink instance specified by @pl.
2386 * This will be the link settings read from the MAC, PHY or fixed link
2387 * settings depending on the current negotiation mode.
2388 */
2389int phylink_ethtool_ksettings_get(struct phylink *pl,
2390 struct ethtool_link_ksettings *kset)
2391{
2392 struct phylink_link_state link_state;
2393
2394 ASSERT_RTNL();
2395
2396 if (pl->phydev)
2397 phy_ethtool_ksettings_get(pl->phydev, kset);
2398 else
2399 kset->base.port = pl->link_port;
2400
2401 linkmode_copy(kset->link_modes.supported, pl->supported);
2402
2403 switch (pl->cur_link_an_mode) {
2404 case MLO_AN_FIXED:
2405 /* We are using fixed settings. Report these as the
2406 * current link settings - and note that these also
2407 * represent the supported speeds/duplex/pause modes.
2408 */
2409 phylink_get_fixed_state(pl, &link_state);
2410 phylink_get_ksettings(&link_state, kset);
2411 break;
2412
2413 case MLO_AN_INBAND:
2414 /* If there is a phy attached, then use the reported
2415 * settings from the phy with no modification.
2416 */
2417 if (pl->phydev)
2418 break;
2419
2420 phylink_mac_pcs_get_state(pl, &link_state);
2421
2422 /* The MAC is reporting the link results from its own PCS
2423 * layer via in-band status. Report these as the current
2424 * link settings.
2425 */
2426 phylink_get_ksettings(&link_state, kset);
2427 break;
2428 }
2429
2430 return 0;
2431}
2432EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_get);
2433
2434/**
2435 * phylink_ethtool_ksettings_set() - set the link settings
2436 * @pl: a pointer to a &struct phylink returned from phylink_create()
2437 * @kset: a pointer to a &struct ethtool_link_ksettings for the desired modes
2438 */
2439int phylink_ethtool_ksettings_set(struct phylink *pl,
2440 const struct ethtool_link_ksettings *kset)
2441{
2442 __ETHTOOL_DECLARE_LINK_MODE_MASK(support);
2443 struct phylink_link_state config;
2444 const struct phy_setting *s;
2445
2446 ASSERT_RTNL();
2447
2448 if (pl->phydev) {
2449 struct ethtool_link_ksettings phy_kset = *kset;
2450
2451 linkmode_and(phy_kset.link_modes.advertising,
2452 phy_kset.link_modes.advertising,
2453 pl->supported);
2454
2455 /* We can rely on phylib for this update; we also do not need
2456 * to update the pl->link_config settings:
2457 * - the configuration returned via ksettings_get() will come
2458 * from phylib whenever a PHY is present.
2459 * - link_config.interface will be updated by the PHY calling
2460 * back via phylink_phy_change() and a subsequent resolve.
2461 * - initial link configuration for PHY mode comes from the
2462 * last phy state updated via phylink_phy_change().
2463 * - other configuration changes (e.g. pause modes) are
2464 * performed directly via phylib.
2465 * - if in in-band mode with a PHY, the link configuration
2466 * is passed on the link from the PHY, and all of
2467 * link_config.{speed,duplex,an_enabled,pause} are not used.
2468 * - the only possible use would be link_config.advertising
2469 * pause modes when in 1000base-X mode with a PHY, but in
2470 * the presence of a PHY, this should not be changed as that
2471 * should be determined from the media side advertisement.
2472 */
2473 return phy_ethtool_ksettings_set(pl->phydev, &phy_kset);
2474 }
2475
2476 config = pl->link_config;
2477 /* Mask out unsupported advertisements */
2478 linkmode_and(config.advertising, kset->link_modes.advertising,
2479 pl->supported);
2480
2481 /* FIXME: should we reject autoneg if phy/mac does not support it? */
2482 switch (kset->base.autoneg) {
2483 case AUTONEG_DISABLE:
2484 /* Autonegotiation disabled, select a suitable speed and
2485 * duplex.
2486 */
2487 s = phy_lookup_setting(kset->base.speed, kset->base.duplex,
2488 pl->supported, false);
2489 if (!s)
2490 return -EINVAL;
2491
2492 /* If we have a fixed link, refuse to change link parameters.
2493 * If the link parameters match, accept them but do nothing.
2494 */
2495 if (pl->cur_link_an_mode == MLO_AN_FIXED) {
2496 if (s->speed != pl->link_config.speed ||
2497 s->duplex != pl->link_config.duplex)
2498 return -EINVAL;
2499 return 0;
2500 }
2501
2502 config.speed = s->speed;
2503 config.duplex = s->duplex;
2504 break;
2505
2506 case AUTONEG_ENABLE:
2507 /* If we have a fixed link, allow autonegotiation (since that
2508 * is our default case) but do not allow the advertisement to
2509 * be changed. If the advertisement matches, simply return.
2510 */
2511 if (pl->cur_link_an_mode == MLO_AN_FIXED) {
2512 if (!linkmode_equal(config.advertising,
2513 pl->link_config.advertising))
2514 return -EINVAL;
2515 return 0;
2516 }
2517
2518 config.speed = SPEED_UNKNOWN;
2519 config.duplex = DUPLEX_UNKNOWN;
2520 break;
2521
2522 default:
2523 return -EINVAL;
2524 }
2525
2526 /* We have ruled out the case with a PHY attached, and the
2527 * fixed-link cases. All that is left are in-band links.
2528 */
2529 linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising,
2530 kset->base.autoneg == AUTONEG_ENABLE);
2531
2532 /* If this link is with an SFP, ensure that changes to advertised modes
2533 * also cause the associated interface to be selected such that the
2534 * link can be configured correctly.
2535 */
2536 if (pl->sfp_bus) {
2537 config.interface = sfp_select_interface(pl->sfp_bus,
2538 config.advertising);
2539 if (config.interface == PHY_INTERFACE_MODE_NA) {
2540 phylink_err(pl,
2541 "selection of interface failed, advertisement %*pb\n",
2542 __ETHTOOL_LINK_MODE_MASK_NBITS,
2543 config.advertising);
2544 return -EINVAL;
2545 }
2546
2547 /* Revalidate with the selected interface */
2548 linkmode_copy(support, pl->supported);
2549 if (phylink_validate(pl, support, &config)) {
2550 phylink_err(pl, "validation of %s/%s with support %*pb failed\n",
2551 phylink_an_mode_str(pl->cur_link_an_mode),
2552 phy_modes(config.interface),
2553 __ETHTOOL_LINK_MODE_MASK_NBITS, support);
2554 return -EINVAL;
2555 }
2556 } else {
2557 /* Validate without changing the current supported mask. */
2558 linkmode_copy(support, pl->supported);
2559 if (phylink_validate(pl, support, &config))
2560 return -EINVAL;
2561 }
2562
2563 /* If autonegotiation is enabled, we must have an advertisement */
2564 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
2565 config.advertising) &&
2566 phylink_is_empty_linkmode(config.advertising))
2567 return -EINVAL;
2568
2569 mutex_lock(&pl->state_mutex);
2570 pl->link_config.speed = config.speed;
2571 pl->link_config.duplex = config.duplex;
2572
2573 if (pl->link_config.interface != config.interface) {
2574 /* The interface changed, e.g. 1000base-X <-> 2500base-X */
2575 /* We need to force the link down, then change the interface */
2576 if (pl->old_link_state) {
2577 phylink_link_down(pl);
2578 pl->old_link_state = false;
2579 }
2580 if (!test_bit(PHYLINK_DISABLE_STOPPED,
2581 &pl->phylink_disable_state))
2582 phylink_major_config(pl, false, &config);
2583 pl->link_config.interface = config.interface;
2584 linkmode_copy(pl->link_config.advertising, config.advertising);
2585 } else if (!linkmode_equal(pl->link_config.advertising,
2586 config.advertising)) {
2587 linkmode_copy(pl->link_config.advertising, config.advertising);
2588 phylink_change_inband_advert(pl);
2589 }
2590 mutex_unlock(&pl->state_mutex);
2591
2592 return 0;
2593}
2594EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_set);
2595
2596/**
2597 * phylink_ethtool_nway_reset() - restart negotiation
2598 * @pl: a pointer to a &struct phylink returned from phylink_create()
2599 *
2600 * Restart negotiation for the phylink instance specified by @pl. This will
2601 * cause any attached phy to restart negotiation with the link partner, and
2602 * if the MAC is in a BaseX mode, the MAC will also be requested to restart
2603 * negotiation.
2604 *
2605 * Returns zero on success, or negative error code.
2606 */
2607int phylink_ethtool_nway_reset(struct phylink *pl)
2608{
2609 int ret = 0;
2610
2611 ASSERT_RTNL();
2612
2613 if (pl->phydev)
2614 ret = phy_restart_aneg(pl->phydev);
2615 phylink_pcs_an_restart(pl);
2616
2617 return ret;
2618}
2619EXPORT_SYMBOL_GPL(phylink_ethtool_nway_reset);
2620
2621/**
2622 * phylink_ethtool_get_pauseparam() - get the current pause parameters
2623 * @pl: a pointer to a &struct phylink returned from phylink_create()
2624 * @pause: a pointer to a &struct ethtool_pauseparam
2625 */
2626void phylink_ethtool_get_pauseparam(struct phylink *pl,
2627 struct ethtool_pauseparam *pause)
2628{
2629 ASSERT_RTNL();
2630
2631 pause->autoneg = !!(pl->link_config.pause & MLO_PAUSE_AN);
2632 pause->rx_pause = !!(pl->link_config.pause & MLO_PAUSE_RX);
2633 pause->tx_pause = !!(pl->link_config.pause & MLO_PAUSE_TX);
2634}
2635EXPORT_SYMBOL_GPL(phylink_ethtool_get_pauseparam);
2636
2637/**
2638 * phylink_ethtool_set_pauseparam() - set the current pause parameters
2639 * @pl: a pointer to a &struct phylink returned from phylink_create()
2640 * @pause: a pointer to a &struct ethtool_pauseparam
2641 */
2642int phylink_ethtool_set_pauseparam(struct phylink *pl,
2643 struct ethtool_pauseparam *pause)
2644{
2645 struct phylink_link_state *config = &pl->link_config;
2646 bool manual_changed;
2647 int pause_state;
2648
2649 ASSERT_RTNL();
2650
2651 if (pl->cur_link_an_mode == MLO_AN_FIXED)
2652 return -EOPNOTSUPP;
2653
2654 if (!phylink_test(pl->supported, Pause) &&
2655 !phylink_test(pl->supported, Asym_Pause))
2656 return -EOPNOTSUPP;
2657
2658 if (!phylink_test(pl->supported, Asym_Pause) &&
2659 pause->rx_pause != pause->tx_pause)
2660 return -EINVAL;
2661
2662 pause_state = 0;
2663 if (pause->autoneg)
2664 pause_state |= MLO_PAUSE_AN;
2665 if (pause->rx_pause)
2666 pause_state |= MLO_PAUSE_RX;
2667 if (pause->tx_pause)
2668 pause_state |= MLO_PAUSE_TX;
2669
2670 mutex_lock(&pl->state_mutex);
2671 /*
2672 * See the comments for linkmode_set_pause(), wrt the deficiencies
2673 * with the current implementation. A solution to this issue would
2674 * be:
2675 * ethtool Local device
2676 * rx tx Pause AsymDir
2677 * 0 0 0 0
2678 * 1 0 1 1
2679 * 0 1 0 1
2680 * 1 1 1 1
2681 * and then use the ethtool rx/tx enablement status to mask the
2682 * rx/tx pause resolution.
2683 */
2684 linkmode_set_pause(config->advertising, pause->tx_pause,
2685 pause->rx_pause);
2686
2687 manual_changed = (config->pause ^ pause_state) & MLO_PAUSE_AN ||
2688 (!(pause_state & MLO_PAUSE_AN) &&
2689 (config->pause ^ pause_state) & MLO_PAUSE_TXRX_MASK);
2690
2691 config->pause = pause_state;
2692
2693 /* Update our in-band advertisement, triggering a renegotiation if
2694 * the advertisement changed.
2695 */
2696 if (!pl->phydev)
2697 phylink_change_inband_advert(pl);
2698
2699 mutex_unlock(&pl->state_mutex);
2700
2701 /* If we have a PHY, a change of the pause frame advertisement will
2702 * cause phylib to renegotiate (if AN is enabled) which will in turn
2703 * call our phylink_phy_change() and trigger a resolve. Note that
2704 * we can't hold our state mutex while calling phy_set_asym_pause().
2705 */
2706 if (pl->phydev)
2707 phy_set_asym_pause(pl->phydev, pause->rx_pause,
2708 pause->tx_pause);
2709
2710 /* If the manual pause settings changed, make sure we trigger a
2711 * resolve to update their state; we can not guarantee that the
2712 * link will cycle.
2713 */
2714 if (manual_changed) {
2715 pl->mac_link_dropped = true;
2716 phylink_run_resolve(pl);
2717 }
2718
2719 return 0;
2720}
2721EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam);
2722
2723/**
2724 * phylink_get_eee_err() - read the energy efficient ethernet error
2725 * counter
2726 * @pl: a pointer to a &struct phylink returned from phylink_create().
2727 *
2728 * Read the Energy Efficient Ethernet error counter from the PHY associated
2729 * with the phylink instance specified by @pl.
2730 *
2731 * Returns positive error counter value, or negative error code.
2732 */
2733int phylink_get_eee_err(struct phylink *pl)
2734{
2735 int ret = 0;
2736
2737 ASSERT_RTNL();
2738
2739 if (pl->phydev)
2740 ret = phy_get_eee_err(pl->phydev);
2741
2742 return ret;
2743}
2744EXPORT_SYMBOL_GPL(phylink_get_eee_err);
2745
2746/**
2747 * phylink_init_eee() - init and check the EEE features
2748 * @pl: a pointer to a &struct phylink returned from phylink_create()
2749 * @clk_stop_enable: allow PHY to stop receive clock
2750 *
2751 * Must be called either with RTNL held or within mac_link_up()
2752 */
2753int phylink_init_eee(struct phylink *pl, bool clk_stop_enable)
2754{
2755 int ret = -EOPNOTSUPP;
2756
2757 if (pl->phydev)
2758 ret = phy_init_eee(pl->phydev, clk_stop_enable);
2759
2760 return ret;
2761}
2762EXPORT_SYMBOL_GPL(phylink_init_eee);
2763
2764/**
2765 * phylink_ethtool_get_eee() - read the energy efficient ethernet parameters
2766 * @pl: a pointer to a &struct phylink returned from phylink_create()
2767 * @eee: a pointer to a &struct ethtool_eee for the read parameters
2768 */
2769int phylink_ethtool_get_eee(struct phylink *pl, struct ethtool_eee *eee)
2770{
2771 int ret = -EOPNOTSUPP;
2772
2773 ASSERT_RTNL();
2774
2775 if (pl->phydev)
2776 ret = phy_ethtool_get_eee(pl->phydev, eee);
2777
2778 return ret;
2779}
2780EXPORT_SYMBOL_GPL(phylink_ethtool_get_eee);
2781
2782/**
2783 * phylink_ethtool_set_eee() - set the energy efficient ethernet parameters
2784 * @pl: a pointer to a &struct phylink returned from phylink_create()
2785 * @eee: a pointer to a &struct ethtool_eee for the desired parameters
2786 */
2787int phylink_ethtool_set_eee(struct phylink *pl, struct ethtool_eee *eee)
2788{
2789 int ret = -EOPNOTSUPP;
2790
2791 ASSERT_RTNL();
2792
2793 if (pl->phydev)
2794 ret = phy_ethtool_set_eee(pl->phydev, eee);
2795
2796 return ret;
2797}
2798EXPORT_SYMBOL_GPL(phylink_ethtool_set_eee);
2799
2800/* This emulates MII registers for a fixed-mode phy operating as per the
2801 * passed in state. "aneg" defines if we report negotiation is possible.
2802 *
2803 * FIXME: should deal with negotiation state too.
2804 */
2805static int phylink_mii_emul_read(unsigned int reg,
2806 struct phylink_link_state *state)
2807{
2808 struct fixed_phy_status fs;
2809 unsigned long *lpa = state->lp_advertising;
2810 int val;
2811
2812 fs.link = state->link;
2813 fs.speed = state->speed;
2814 fs.duplex = state->duplex;
2815 fs.pause = test_bit(ETHTOOL_LINK_MODE_Pause_BIT, lpa);
2816 fs.asym_pause = test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, lpa);
2817
2818 val = swphy_read_reg(reg, &fs);
2819 if (reg == MII_BMSR) {
2820 if (!state->an_complete)
2821 val &= ~BMSR_ANEGCOMPLETE;
2822 }
2823 return val;
2824}
2825
2826static int phylink_phy_read(struct phylink *pl, unsigned int phy_id,
2827 unsigned int reg)
2828{
2829 struct phy_device *phydev = pl->phydev;
2830 int prtad, devad;
2831
2832 if (mdio_phy_id_is_c45(phy_id)) {
2833 prtad = mdio_phy_id_prtad(phy_id);
2834 devad = mdio_phy_id_devad(phy_id);
2835 return mdiobus_c45_read(pl->phydev->mdio.bus, prtad, devad,
2836 reg);
2837 }
2838
2839 if (phydev->is_c45) {
2840 switch (reg) {
2841 case MII_BMCR:
2842 case MII_BMSR:
2843 case MII_PHYSID1:
2844 case MII_PHYSID2:
2845 devad = __ffs(phydev->c45_ids.mmds_present);
2846 break;
2847 case MII_ADVERTISE:
2848 case MII_LPA:
2849 if (!(phydev->c45_ids.mmds_present & MDIO_DEVS_AN))
2850 return -EINVAL;
2851 devad = MDIO_MMD_AN;
2852 if (reg == MII_ADVERTISE)
2853 reg = MDIO_AN_ADVERTISE;
2854 else
2855 reg = MDIO_AN_LPA;
2856 break;
2857 default:
2858 return -EINVAL;
2859 }
2860 prtad = phy_id;
2861 return mdiobus_c45_read(pl->phydev->mdio.bus, prtad, devad,
2862 reg);
2863 }
2864
2865 return mdiobus_read(pl->phydev->mdio.bus, phy_id, reg);
2866}
2867
2868static int phylink_phy_write(struct phylink *pl, unsigned int phy_id,
2869 unsigned int reg, unsigned int val)
2870{
2871 struct phy_device *phydev = pl->phydev;
2872 int prtad, devad;
2873
2874 if (mdio_phy_id_is_c45(phy_id)) {
2875 prtad = mdio_phy_id_prtad(phy_id);
2876 devad = mdio_phy_id_devad(phy_id);
2877 return mdiobus_c45_write(pl->phydev->mdio.bus, prtad, devad,
2878 reg, val);
2879 }
2880
2881 if (phydev->is_c45) {
2882 switch (reg) {
2883 case MII_BMCR:
2884 case MII_BMSR:
2885 case MII_PHYSID1:
2886 case MII_PHYSID2:
2887 devad = __ffs(phydev->c45_ids.mmds_present);
2888 break;
2889 case MII_ADVERTISE:
2890 case MII_LPA:
2891 if (!(phydev->c45_ids.mmds_present & MDIO_DEVS_AN))
2892 return -EINVAL;
2893 devad = MDIO_MMD_AN;
2894 if (reg == MII_ADVERTISE)
2895 reg = MDIO_AN_ADVERTISE;
2896 else
2897 reg = MDIO_AN_LPA;
2898 break;
2899 default:
2900 return -EINVAL;
2901 }
2902 return mdiobus_c45_write(pl->phydev->mdio.bus, phy_id, devad,
2903 reg, val);
2904 }
2905
2906 return mdiobus_write(phydev->mdio.bus, phy_id, reg, val);
2907}
2908
2909static int phylink_mii_read(struct phylink *pl, unsigned int phy_id,
2910 unsigned int reg)
2911{
2912 struct phylink_link_state state;
2913 int val = 0xffff;
2914
2915 switch (pl->cur_link_an_mode) {
2916 case MLO_AN_FIXED:
2917 if (phy_id == 0) {
2918 phylink_get_fixed_state(pl, &state);
2919 val = phylink_mii_emul_read(reg, &state);
2920 }
2921 break;
2922
2923 case MLO_AN_PHY:
2924 return -EOPNOTSUPP;
2925
2926 case MLO_AN_INBAND:
2927 if (phy_id == 0) {
2928 phylink_mac_pcs_get_state(pl, &state);
2929 val = phylink_mii_emul_read(reg, &state);
2930 }
2931 break;
2932 }
2933
2934 return val & 0xffff;
2935}
2936
2937static int phylink_mii_write(struct phylink *pl, unsigned int phy_id,
2938 unsigned int reg, unsigned int val)
2939{
2940 switch (pl->cur_link_an_mode) {
2941 case MLO_AN_FIXED:
2942 break;
2943
2944 case MLO_AN_PHY:
2945 return -EOPNOTSUPP;
2946
2947 case MLO_AN_INBAND:
2948 break;
2949 }
2950
2951 return 0;
2952}
2953
2954/**
2955 * phylink_mii_ioctl() - generic mii ioctl interface
2956 * @pl: a pointer to a &struct phylink returned from phylink_create()
2957 * @ifr: a pointer to a &struct ifreq for socket ioctls
2958 * @cmd: ioctl cmd to execute
2959 *
2960 * Perform the specified MII ioctl on the PHY attached to the phylink instance
2961 * specified by @pl. If no PHY is attached, emulate the presence of the PHY.
2962 *
2963 * Returns: zero on success or negative error code.
2964 *
2965 * %SIOCGMIIPHY:
2966 * read register from the current PHY.
2967 * %SIOCGMIIREG:
2968 * read register from the specified PHY.
2969 * %SIOCSMIIREG:
2970 * set a register on the specified PHY.
2971 */
2972int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd)
2973{
2974 struct mii_ioctl_data *mii = if_mii(ifr);
2975 int ret;
2976
2977 ASSERT_RTNL();
2978
2979 if (pl->phydev) {
2980 /* PHYs only exist for MLO_AN_PHY and SGMII */
2981 switch (cmd) {
2982 case SIOCGMIIPHY:
2983 mii->phy_id = pl->phydev->mdio.addr;
2984 fallthrough;
2985
2986 case SIOCGMIIREG:
2987 ret = phylink_phy_read(pl, mii->phy_id, mii->reg_num);
2988 if (ret >= 0) {
2989 mii->val_out = ret;
2990 ret = 0;
2991 }
2992 break;
2993
2994 case SIOCSMIIREG:
2995 ret = phylink_phy_write(pl, mii->phy_id, mii->reg_num,
2996 mii->val_in);
2997 break;
2998
2999 default:
3000 ret = phy_mii_ioctl(pl->phydev, ifr, cmd);
3001 break;
3002 }
3003 } else {
3004 switch (cmd) {
3005 case SIOCGMIIPHY:
3006 mii->phy_id = 0;
3007 fallthrough;
3008
3009 case SIOCGMIIREG:
3010 ret = phylink_mii_read(pl, mii->phy_id, mii->reg_num);
3011 if (ret >= 0) {
3012 mii->val_out = ret;
3013 ret = 0;
3014 }
3015 break;
3016
3017 case SIOCSMIIREG:
3018 ret = phylink_mii_write(pl, mii->phy_id, mii->reg_num,
3019 mii->val_in);
3020 break;
3021
3022 default:
3023 ret = -EOPNOTSUPP;
3024 break;
3025 }
3026 }
3027
3028 return ret;
3029}
3030EXPORT_SYMBOL_GPL(phylink_mii_ioctl);
3031
3032/**
3033 * phylink_speed_down() - set the non-SFP PHY to lowest speed supported by both
3034 * link partners
3035 * @pl: a pointer to a &struct phylink returned from phylink_create()
3036 * @sync: perform action synchronously
3037 *
3038 * If we have a PHY that is not part of a SFP module, then set the speed
3039 * as described in the phy_speed_down() function. Please see this function
3040 * for a description of the @sync parameter.
3041 *
3042 * Returns zero if there is no PHY, otherwise as per phy_speed_down().
3043 */
3044int phylink_speed_down(struct phylink *pl, bool sync)
3045{
3046 int ret = 0;
3047
3048 ASSERT_RTNL();
3049
3050 if (!pl->sfp_bus && pl->phydev)
3051 ret = phy_speed_down(pl->phydev, sync);
3052
3053 return ret;
3054}
3055EXPORT_SYMBOL_GPL(phylink_speed_down);
3056
3057/**
3058 * phylink_speed_up() - restore the advertised speeds prior to the call to
3059 * phylink_speed_down()
3060 * @pl: a pointer to a &struct phylink returned from phylink_create()
3061 *
3062 * If we have a PHY that is not part of a SFP module, then restore the
3063 * PHY speeds as per phy_speed_up().
3064 *
3065 * Returns zero if there is no PHY, otherwise as per phy_speed_up().
3066 */
3067int phylink_speed_up(struct phylink *pl)
3068{
3069 int ret = 0;
3070
3071 ASSERT_RTNL();
3072
3073 if (!pl->sfp_bus && pl->phydev)
3074 ret = phy_speed_up(pl->phydev);
3075
3076 return ret;
3077}
3078EXPORT_SYMBOL_GPL(phylink_speed_up);
3079
3080static void phylink_sfp_attach(void *upstream, struct sfp_bus *bus)
3081{
3082 struct phylink *pl = upstream;
3083
3084 pl->netdev->sfp_bus = bus;
3085}
3086
3087static void phylink_sfp_detach(void *upstream, struct sfp_bus *bus)
3088{
3089 struct phylink *pl = upstream;
3090
3091 pl->netdev->sfp_bus = NULL;
3092}
3093
3094static phy_interface_t phylink_choose_sfp_interface(struct phylink *pl,
3095 const unsigned long *intf)
3096{
3097 phy_interface_t interface;
3098 size_t i;
3099
3100 interface = PHY_INTERFACE_MODE_NA;
3101 for (i = 0; i < ARRAY_SIZE(phylink_sfp_interface_preference); i++)
3102 if (test_bit(phylink_sfp_interface_preference[i], intf)) {
3103 interface = phylink_sfp_interface_preference[i];
3104 break;
3105 }
3106
3107 return interface;
3108}
3109
3110static void phylink_sfp_set_config(struct phylink *pl, u8 mode,
3111 unsigned long *supported,
3112 struct phylink_link_state *state)
3113{
3114 bool changed = false;
3115
3116 phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n",
3117 phylink_an_mode_str(mode), phy_modes(state->interface),
3118 __ETHTOOL_LINK_MODE_MASK_NBITS, supported);
3119
3120 if (!linkmode_equal(pl->supported, supported)) {
3121 linkmode_copy(pl->supported, supported);
3122 changed = true;
3123 }
3124
3125 if (!linkmode_equal(pl->link_config.advertising, state->advertising)) {
3126 linkmode_copy(pl->link_config.advertising, state->advertising);
3127 changed = true;
3128 }
3129
3130 if (pl->cur_link_an_mode != mode ||
3131 pl->link_config.interface != state->interface) {
3132 pl->cur_link_an_mode = mode;
3133 pl->link_config.interface = state->interface;
3134
3135 changed = true;
3136
3137 phylink_info(pl, "switched to %s/%s link mode\n",
3138 phylink_an_mode_str(mode),
3139 phy_modes(state->interface));
3140 }
3141
3142 if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
3143 &pl->phylink_disable_state))
3144 phylink_mac_initial_config(pl, false);
3145}
3146
3147static int phylink_sfp_config_phy(struct phylink *pl, u8 mode,
3148 struct phy_device *phy)
3149{
3150 __ETHTOOL_DECLARE_LINK_MODE_MASK(support1);
3151 __ETHTOOL_DECLARE_LINK_MODE_MASK(support);
3152 struct phylink_link_state config;
3153 phy_interface_t iface;
3154 int ret;
3155
3156 linkmode_copy(support, phy->supported);
3157
3158 memset(&config, 0, sizeof(config));
3159 linkmode_copy(config.advertising, phy->advertising);
3160 config.interface = PHY_INTERFACE_MODE_NA;
3161 config.speed = SPEED_UNKNOWN;
3162 config.duplex = DUPLEX_UNKNOWN;
3163 config.pause = MLO_PAUSE_AN;
3164
3165 /* Ignore errors if we're expecting a PHY to attach later */
3166 ret = phylink_validate(pl, support, &config);
3167 if (ret) {
3168 phylink_err(pl, "validation with support %*pb failed: %pe\n",
3169 __ETHTOOL_LINK_MODE_MASK_NBITS, support,
3170 ERR_PTR(ret));
3171 return ret;
3172 }
3173
3174 iface = sfp_select_interface(pl->sfp_bus, config.advertising);
3175 if (iface == PHY_INTERFACE_MODE_NA) {
3176 phylink_err(pl,
3177 "selection of interface failed, advertisement %*pb\n",
3178 __ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising);
3179 return -EINVAL;
3180 }
3181
3182 config.interface = iface;
3183 linkmode_copy(support1, support);
3184 ret = phylink_validate(pl, support1, &config);
3185 if (ret) {
3186 phylink_err(pl,
3187 "validation of %s/%s with support %*pb failed: %pe\n",
3188 phylink_an_mode_str(mode),
3189 phy_modes(config.interface),
3190 __ETHTOOL_LINK_MODE_MASK_NBITS, support,
3191 ERR_PTR(ret));
3192 return ret;
3193 }
3194
3195 pl->link_port = pl->sfp_port;
3196
3197 phylink_sfp_set_config(pl, mode, support, &config);
3198
3199 return 0;
3200}
3201
3202static int phylink_sfp_config_optical(struct phylink *pl)
3203{
3204 __ETHTOOL_DECLARE_LINK_MODE_MASK(support);
3205 DECLARE_PHY_INTERFACE_MASK(interfaces);
3206 struct phylink_link_state config;
3207 phy_interface_t interface;
3208 int ret;
3209
3210 phylink_dbg(pl, "optical SFP: interfaces=[mac=%*pbl, sfp=%*pbl]\n",
3211 (int)PHY_INTERFACE_MODE_MAX,
3212 pl->config->supported_interfaces,
3213 (int)PHY_INTERFACE_MODE_MAX,
3214 pl->sfp_interfaces);
3215
3216 /* Find the union of the supported interfaces by the PCS/MAC and
3217 * the SFP module.
3218 */
3219 phy_interface_and(interfaces, pl->config->supported_interfaces,
3220 pl->sfp_interfaces);
3221 if (phy_interface_empty(interfaces)) {
3222 phylink_err(pl, "unsupported SFP module: no common interface modes\n");
3223 return -EINVAL;
3224 }
3225
3226 memset(&config, 0, sizeof(config));
3227 linkmode_copy(support, pl->sfp_support);
3228 linkmode_copy(config.advertising, pl->sfp_support);
3229 config.speed = SPEED_UNKNOWN;
3230 config.duplex = DUPLEX_UNKNOWN;
3231 config.pause = MLO_PAUSE_AN;
3232
3233 /* For all the interfaces that are supported, reduce the sfp_support
3234 * mask to only those link modes that can be supported.
3235 */
3236 ret = phylink_validate_mask(pl, NULL, pl->sfp_support, &config,
3237 interfaces);
3238 if (ret) {
3239 phylink_err(pl, "unsupported SFP module: validation with support %*pb failed\n",
3240 __ETHTOOL_LINK_MODE_MASK_NBITS, support);
3241 return ret;
3242 }
3243
3244 interface = phylink_choose_sfp_interface(pl, interfaces);
3245 if (interface == PHY_INTERFACE_MODE_NA) {
3246 phylink_err(pl, "failed to select SFP interface\n");
3247 return -EINVAL;
3248 }
3249
3250 phylink_dbg(pl, "optical SFP: chosen %s interface\n",
3251 phy_modes(interface));
3252
3253 config.interface = interface;
3254
3255 /* Ignore errors if we're expecting a PHY to attach later */
3256 ret = phylink_validate(pl, support, &config);
3257 if (ret) {
3258 phylink_err(pl, "validation with support %*pb failed: %pe\n",
3259 __ETHTOOL_LINK_MODE_MASK_NBITS, support,
3260 ERR_PTR(ret));
3261 return ret;
3262 }
3263
3264 pl->link_port = pl->sfp_port;
3265
3266 phylink_sfp_set_config(pl, MLO_AN_INBAND, pl->sfp_support, &config);
3267
3268 return 0;
3269}
3270
3271static int phylink_sfp_module_insert(void *upstream,
3272 const struct sfp_eeprom_id *id)
3273{
3274 struct phylink *pl = upstream;
3275
3276 ASSERT_RTNL();
3277
3278 linkmode_zero(pl->sfp_support);
3279 phy_interface_zero(pl->sfp_interfaces);
3280 sfp_parse_support(pl->sfp_bus, id, pl->sfp_support, pl->sfp_interfaces);
3281 pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, pl->sfp_support);
3282
3283 /* If this module may have a PHY connecting later, defer until later */
3284 pl->sfp_may_have_phy = sfp_may_have_phy(pl->sfp_bus, id);
3285 if (pl->sfp_may_have_phy)
3286 return 0;
3287
3288 return phylink_sfp_config_optical(pl);
3289}
3290
3291static int phylink_sfp_module_start(void *upstream)
3292{
3293 struct phylink *pl = upstream;
3294
3295 /* If this SFP module has a PHY, start the PHY now. */
3296 if (pl->phydev) {
3297 phy_start(pl->phydev);
3298 return 0;
3299 }
3300
3301 /* If the module may have a PHY but we didn't detect one we
3302 * need to configure the MAC here.
3303 */
3304 if (!pl->sfp_may_have_phy)
3305 return 0;
3306
3307 return phylink_sfp_config_optical(pl);
3308}
3309
3310static void phylink_sfp_module_stop(void *upstream)
3311{
3312 struct phylink *pl = upstream;
3313
3314 /* If this SFP module has a PHY, stop it. */
3315 if (pl->phydev)
3316 phy_stop(pl->phydev);
3317}
3318
3319static void phylink_sfp_link_down(void *upstream)
3320{
3321 struct phylink *pl = upstream;
3322
3323 ASSERT_RTNL();
3324
3325 phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_LINK);
3326}
3327
3328static void phylink_sfp_link_up(void *upstream)
3329{
3330 struct phylink *pl = upstream;
3331
3332 ASSERT_RTNL();
3333
3334 phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_LINK);
3335}
3336
3337/* The Broadcom BCM84881 in the Methode DM7052 is unable to provide a SGMII
3338 * or 802.3z control word, so inband will not work.
3339 */
3340static bool phylink_phy_no_inband(struct phy_device *phy)
3341{
3342 return phy->is_c45 && phy_id_compare(phy->c45_ids.device_ids[1],
3343 0xae025150, 0xfffffff0);
3344}
3345
3346static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
3347{
3348 struct phylink *pl = upstream;
3349 phy_interface_t interface;
3350 u8 mode;
3351 int ret;
3352
3353 /*
3354 * This is the new way of dealing with flow control for PHYs,
3355 * as described by Timur Tabi in commit 529ed1275263 ("net: phy:
3356 * phy drivers should not set SUPPORTED_[Asym_]Pause") except
3357 * using our validate call to the MAC, we rely upon the MAC
3358 * clearing the bits from both supported and advertising fields.
3359 */
3360 phy_support_asym_pause(phy);
3361
3362 if (phylink_phy_no_inband(phy))
3363 mode = MLO_AN_PHY;
3364 else
3365 mode = MLO_AN_INBAND;
3366
3367 /* Set the PHY's host supported interfaces */
3368 phy_interface_and(phy->host_interfaces, phylink_sfp_interfaces,
3369 pl->config->supported_interfaces);
3370
3371 /* Do the initial configuration */
3372 ret = phylink_sfp_config_phy(pl, mode, phy);
3373 if (ret < 0)
3374 return ret;
3375
3376 interface = pl->link_config.interface;
3377 ret = phylink_attach_phy(pl, phy, interface);
3378 if (ret < 0)
3379 return ret;
3380
3381 ret = phylink_bringup_phy(pl, phy, interface);
3382 if (ret)
3383 phy_detach(phy);
3384
3385 return ret;
3386}
3387
3388static void phylink_sfp_disconnect_phy(void *upstream)
3389{
3390 phylink_disconnect_phy(upstream);
3391}
3392
3393static const struct sfp_upstream_ops sfp_phylink_ops = {
3394 .attach = phylink_sfp_attach,
3395 .detach = phylink_sfp_detach,
3396 .module_insert = phylink_sfp_module_insert,
3397 .module_start = phylink_sfp_module_start,
3398 .module_stop = phylink_sfp_module_stop,
3399 .link_up = phylink_sfp_link_up,
3400 .link_down = phylink_sfp_link_down,
3401 .connect_phy = phylink_sfp_connect_phy,
3402 .disconnect_phy = phylink_sfp_disconnect_phy,
3403};
3404
3405/* Helpers for MAC drivers */
3406
3407static struct {
3408 int bit;
3409 int speed;
3410} phylink_c73_priority_resolution[] = {
3411 { ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT, SPEED_100000 },
3412 { ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT, SPEED_100000 },
3413 /* 100GBASE-KP4 and 100GBASE-CR10 not supported */
3414 { ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT, SPEED_40000 },
3415 { ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT, SPEED_40000 },
3416 { ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, SPEED_10000 },
3417 { ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, SPEED_10000 },
3418 /* 5GBASE-KR not supported */
3419 { ETHTOOL_LINK_MODE_2500baseX_Full_BIT, SPEED_2500 },
3420 { ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, SPEED_1000 },
3421};
3422
3423void phylink_resolve_c73(struct phylink_link_state *state)
3424{
3425 int i;
3426
3427 for (i = 0; i < ARRAY_SIZE(phylink_c73_priority_resolution); i++) {
3428 int bit = phylink_c73_priority_resolution[i].bit;
3429 if (linkmode_test_bit(bit, state->advertising) &&
3430 linkmode_test_bit(bit, state->lp_advertising))
3431 break;
3432 }
3433
3434 if (i < ARRAY_SIZE(phylink_c73_priority_resolution)) {
3435 state->speed = phylink_c73_priority_resolution[i].speed;
3436 state->duplex = DUPLEX_FULL;
3437 } else {
3438 /* negotiation failure */
3439 state->link = false;
3440 }
3441
3442 phylink_resolve_an_pause(state);
3443}
3444EXPORT_SYMBOL_GPL(phylink_resolve_c73);
3445
3446static void phylink_decode_c37_word(struct phylink_link_state *state,
3447 uint16_t config_reg, int speed)
3448{
3449 int fd_bit;
3450
3451 if (speed == SPEED_2500)
3452 fd_bit = ETHTOOL_LINK_MODE_2500baseX_Full_BIT;
3453 else
3454 fd_bit = ETHTOOL_LINK_MODE_1000baseX_Full_BIT;
3455
3456 mii_lpa_mod_linkmode_x(state->lp_advertising, config_reg, fd_bit);
3457
3458 if (linkmode_test_bit(fd_bit, state->advertising) &&
3459 linkmode_test_bit(fd_bit, state->lp_advertising)) {
3460 state->speed = speed;
3461 state->duplex = DUPLEX_FULL;
3462 } else {
3463 /* negotiation failure */
3464 state->link = false;
3465 }
3466
3467 phylink_resolve_an_pause(state);
3468}
3469
3470static void phylink_decode_sgmii_word(struct phylink_link_state *state,
3471 uint16_t config_reg)
3472{
3473 if (!(config_reg & LPA_SGMII_LINK)) {
3474 state->link = false;
3475 return;
3476 }
3477
3478 switch (config_reg & LPA_SGMII_SPD_MASK) {
3479 case LPA_SGMII_10:
3480 state->speed = SPEED_10;
3481 break;
3482 case LPA_SGMII_100:
3483 state->speed = SPEED_100;
3484 break;
3485 case LPA_SGMII_1000:
3486 state->speed = SPEED_1000;
3487 break;
3488 default:
3489 state->link = false;
3490 return;
3491 }
3492 if (config_reg & LPA_SGMII_FULL_DUPLEX)
3493 state->duplex = DUPLEX_FULL;
3494 else
3495 state->duplex = DUPLEX_HALF;
3496}
3497
3498/**
3499 * phylink_decode_usxgmii_word() - decode the USXGMII word from a MAC PCS
3500 * @state: a pointer to a struct phylink_link_state.
3501 * @lpa: a 16 bit value which stores the USXGMII auto-negotiation word
3502 *
3503 * Helper for MAC PCS supporting the USXGMII protocol and the auto-negotiation
3504 * code word. Decode the USXGMII code word and populate the corresponding fields
3505 * (speed, duplex) into the phylink_link_state structure.
3506 */
3507void phylink_decode_usxgmii_word(struct phylink_link_state *state,
3508 uint16_t lpa)
3509{
3510 switch (lpa & MDIO_USXGMII_SPD_MASK) {
3511 case MDIO_USXGMII_10:
3512 state->speed = SPEED_10;
3513 break;
3514 case MDIO_USXGMII_100:
3515 state->speed = SPEED_100;
3516 break;
3517 case MDIO_USXGMII_1000:
3518 state->speed = SPEED_1000;
3519 break;
3520 case MDIO_USXGMII_2500:
3521 state->speed = SPEED_2500;
3522 break;
3523 case MDIO_USXGMII_5000:
3524 state->speed = SPEED_5000;
3525 break;
3526 case MDIO_USXGMII_10G:
3527 state->speed = SPEED_10000;
3528 break;
3529 default:
3530 state->link = false;
3531 return;
3532 }
3533
3534 if (lpa & MDIO_USXGMII_FULL_DUPLEX)
3535 state->duplex = DUPLEX_FULL;
3536 else
3537 state->duplex = DUPLEX_HALF;
3538}
3539EXPORT_SYMBOL_GPL(phylink_decode_usxgmii_word);
3540
3541/**
3542 * phylink_decode_usgmii_word() - decode the USGMII word from a MAC PCS
3543 * @state: a pointer to a struct phylink_link_state.
3544 * @lpa: a 16 bit value which stores the USGMII auto-negotiation word
3545 *
3546 * Helper for MAC PCS supporting the USGMII protocol and the auto-negotiation
3547 * code word. Decode the USGMII code word and populate the corresponding fields
3548 * (speed, duplex) into the phylink_link_state structure. The structure for this
3549 * word is the same as the USXGMII word, except it only supports speeds up to
3550 * 1Gbps.
3551 */
3552static void phylink_decode_usgmii_word(struct phylink_link_state *state,
3553 uint16_t lpa)
3554{
3555 switch (lpa & MDIO_USXGMII_SPD_MASK) {
3556 case MDIO_USXGMII_10:
3557 state->speed = SPEED_10;
3558 break;
3559 case MDIO_USXGMII_100:
3560 state->speed = SPEED_100;
3561 break;
3562 case MDIO_USXGMII_1000:
3563 state->speed = SPEED_1000;
3564 break;
3565 default:
3566 state->link = false;
3567 return;
3568 }
3569
3570 if (lpa & MDIO_USXGMII_FULL_DUPLEX)
3571 state->duplex = DUPLEX_FULL;
3572 else
3573 state->duplex = DUPLEX_HALF;
3574}
3575
3576/**
3577 * phylink_mii_c22_pcs_decode_state() - Decode MAC PCS state from MII registers
3578 * @state: a pointer to a &struct phylink_link_state.
3579 * @bmsr: The value of the %MII_BMSR register
3580 * @lpa: The value of the %MII_LPA register
3581 *
3582 * Helper for MAC PCS supporting the 802.3 clause 22 register set for
3583 * clause 37 negotiation and/or SGMII control.
3584 *
3585 * Parse the Clause 37 or Cisco SGMII link partner negotiation word into
3586 * the phylink @state structure. This is suitable to be used for implementing
3587 * the pcs_get_state() member of the struct phylink_pcs_ops structure if
3588 * accessing @bmsr and @lpa cannot be done with MDIO directly.
3589 */
3590void phylink_mii_c22_pcs_decode_state(struct phylink_link_state *state,
3591 u16 bmsr, u16 lpa)
3592{
3593 state->link = !!(bmsr & BMSR_LSTATUS);
3594 state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
3595 /* If there is no link or autonegotiation is disabled, the LP advertisement
3596 * data is not meaningful, so don't go any further.
3597 */
3598 if (!state->link || !linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
3599 state->advertising))
3600 return;
3601
3602 switch (state->interface) {
3603 case PHY_INTERFACE_MODE_1000BASEX:
3604 phylink_decode_c37_word(state, lpa, SPEED_1000);
3605 break;
3606
3607 case PHY_INTERFACE_MODE_2500BASEX:
3608 phylink_decode_c37_word(state, lpa, SPEED_2500);
3609 break;
3610
3611 case PHY_INTERFACE_MODE_SGMII:
3612 case PHY_INTERFACE_MODE_QSGMII:
3613 phylink_decode_sgmii_word(state, lpa);
3614 break;
3615 case PHY_INTERFACE_MODE_QUSGMII:
3616 phylink_decode_usgmii_word(state, lpa);
3617 break;
3618
3619 default:
3620 state->link = false;
3621 break;
3622 }
3623}
3624EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_decode_state);
3625
3626/**
3627 * phylink_mii_c22_pcs_get_state() - read the MAC PCS state
3628 * @pcs: a pointer to a &struct mdio_device.
3629 * @state: a pointer to a &struct phylink_link_state.
3630 *
3631 * Helper for MAC PCS supporting the 802.3 clause 22 register set for
3632 * clause 37 negotiation and/or SGMII control.
3633 *
3634 * Read the MAC PCS state from the MII device configured in @config and
3635 * parse the Clause 37 or Cisco SGMII link partner negotiation word into
3636 * the phylink @state structure. This is suitable to be directly plugged
3637 * into the pcs_get_state() member of the struct phylink_pcs_ops
3638 * structure.
3639 */
3640void phylink_mii_c22_pcs_get_state(struct mdio_device *pcs,
3641 struct phylink_link_state *state)
3642{
3643 int bmsr, lpa;
3644
3645 bmsr = mdiodev_read(pcs, MII_BMSR);
3646 lpa = mdiodev_read(pcs, MII_LPA);
3647 if (bmsr < 0 || lpa < 0) {
3648 state->link = false;
3649 return;
3650 }
3651
3652 phylink_mii_c22_pcs_decode_state(state, bmsr, lpa);
3653}
3654EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_get_state);
3655
3656/**
3657 * phylink_mii_c22_pcs_encode_advertisement() - configure the clause 37 PCS
3658 * advertisement
3659 * @interface: the PHY interface mode being configured
3660 * @advertising: the ethtool advertisement mask
3661 *
3662 * Helper for MAC PCS supporting the 802.3 clause 22 register set for
3663 * clause 37 negotiation and/or SGMII control.
3664 *
3665 * Encode the clause 37 PCS advertisement as specified by @interface and
3666 * @advertising.
3667 *
3668 * Return: The new value for @adv, or ``-EINVAL`` if it should not be changed.
3669 */
3670int phylink_mii_c22_pcs_encode_advertisement(phy_interface_t interface,
3671 const unsigned long *advertising)
3672{
3673 u16 adv;
3674
3675 switch (interface) {
3676 case PHY_INTERFACE_MODE_1000BASEX:
3677 case PHY_INTERFACE_MODE_2500BASEX:
3678 adv = ADVERTISE_1000XFULL;
3679 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
3680 advertising))
3681 adv |= ADVERTISE_1000XPAUSE;
3682 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
3683 advertising))
3684 adv |= ADVERTISE_1000XPSE_ASYM;
3685 return adv;
3686 case PHY_INTERFACE_MODE_SGMII:
3687 case PHY_INTERFACE_MODE_QSGMII:
3688 return 0x0001;
3689 default:
3690 /* Nothing to do for other modes */
3691 return -EINVAL;
3692 }
3693}
3694EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_encode_advertisement);
3695
3696/**
3697 * phylink_mii_c22_pcs_config() - configure clause 22 PCS
3698 * @pcs: a pointer to a &struct mdio_device.
3699 * @interface: the PHY interface mode being configured
3700 * @advertising: the ethtool advertisement mask
3701 * @neg_mode: PCS negotiation mode
3702 *
3703 * Configure a Clause 22 PCS PHY with the appropriate negotiation
3704 * parameters for the @mode, @interface and @advertising parameters.
3705 * Returns negative error number on failure, zero if the advertisement
3706 * has not changed, or positive if there is a change.
3707 */
3708int phylink_mii_c22_pcs_config(struct mdio_device *pcs,
3709 phy_interface_t interface,
3710 const unsigned long *advertising,
3711 unsigned int neg_mode)
3712{
3713 bool changed = 0;
3714 u16 bmcr;
3715 int ret, adv;
3716
3717 adv = phylink_mii_c22_pcs_encode_advertisement(interface, advertising);
3718 if (adv >= 0) {
3719 ret = mdiobus_modify_changed(pcs->bus, pcs->addr,
3720 MII_ADVERTISE, 0xffff, adv);
3721 if (ret < 0)
3722 return ret;
3723 changed = ret;
3724 }
3725
3726 if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED)
3727 bmcr = BMCR_ANENABLE;
3728 else
3729 bmcr = 0;
3730
3731 /* Configure the inband state. Ensure ISOLATE bit is disabled */
3732 ret = mdiodev_modify(pcs, MII_BMCR, BMCR_ANENABLE | BMCR_ISOLATE, bmcr);
3733 if (ret < 0)
3734 return ret;
3735
3736 return changed;
3737}
3738EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_config);
3739
3740/**
3741 * phylink_mii_c22_pcs_an_restart() - restart 802.3z autonegotiation
3742 * @pcs: a pointer to a &struct mdio_device.
3743 *
3744 * Helper for MAC PCS supporting the 802.3 clause 22 register set for
3745 * clause 37 negotiation.
3746 *
3747 * Restart the clause 37 negotiation with the link partner. This is
3748 * suitable to be directly plugged into the pcs_get_state() member
3749 * of the struct phylink_pcs_ops structure.
3750 */
3751void phylink_mii_c22_pcs_an_restart(struct mdio_device *pcs)
3752{
3753 int val = mdiodev_read(pcs, MII_BMCR);
3754
3755 if (val >= 0) {
3756 val |= BMCR_ANRESTART;
3757
3758 mdiodev_write(pcs, MII_BMCR, val);
3759 }
3760}
3761EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_an_restart);
3762
3763void phylink_mii_c45_pcs_get_state(struct mdio_device *pcs,
3764 struct phylink_link_state *state)
3765{
3766 struct mii_bus *bus = pcs->bus;
3767 int addr = pcs->addr;
3768 int stat;
3769
3770 stat = mdiobus_c45_read(bus, addr, MDIO_MMD_PCS, MDIO_STAT1);
3771 if (stat < 0) {
3772 state->link = false;
3773 return;
3774 }
3775
3776 state->link = !!(stat & MDIO_STAT1_LSTATUS);
3777 if (!state->link)
3778 return;
3779
3780 switch (state->interface) {
3781 case PHY_INTERFACE_MODE_10GBASER:
3782 state->speed = SPEED_10000;
3783 state->duplex = DUPLEX_FULL;
3784 break;
3785
3786 default:
3787 break;
3788 }
3789}
3790EXPORT_SYMBOL_GPL(phylink_mii_c45_pcs_get_state);
3791
3792static int __init phylink_init(void)
3793{
3794 for (int i = 0; i < ARRAY_SIZE(phylink_sfp_interface_preference); ++i)
3795 __set_bit(phylink_sfp_interface_preference[i],
3796 phylink_sfp_interfaces);
3797
3798 return 0;
3799}
3800
3801module_init(phylink_init);
3802
3803MODULE_LICENSE("GPL v2");
3804MODULE_DESCRIPTION("phylink models the MAC to optional PHY connection");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * phylink models the MAC to optional PHY connection, supporting
4 * technologies such as SFP cages where the PHY is hot-pluggable.
5 *
6 * Copyright (C) 2015 Russell King
7 */
8#include <linux/acpi.h>
9#include <linux/ethtool.h>
10#include <linux/export.h>
11#include <linux/gpio/consumer.h>
12#include <linux/netdevice.h>
13#include <linux/of.h>
14#include <linux/of_mdio.h>
15#include <linux/phy.h>
16#include <linux/phy_fixed.h>
17#include <linux/phylink.h>
18#include <linux/rtnetlink.h>
19#include <linux/spinlock.h>
20#include <linux/timer.h>
21#include <linux/workqueue.h>
22
23#include "sfp.h"
24#include "swphy.h"
25
26#define SUPPORTED_INTERFACES \
27 (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE | \
28 SUPPORTED_BNC | SUPPORTED_AUI | SUPPORTED_Backplane)
29#define ADVERTISED_INTERFACES \
30 (ADVERTISED_TP | ADVERTISED_MII | ADVERTISED_FIBRE | \
31 ADVERTISED_BNC | ADVERTISED_AUI | ADVERTISED_Backplane)
32
33enum {
34 PHYLINK_DISABLE_STOPPED,
35 PHYLINK_DISABLE_LINK,
36 PHYLINK_DISABLE_MAC_WOL,
37};
38
39/**
40 * struct phylink - internal data type for phylink
41 */
42struct phylink {
43 /* private: */
44 struct net_device *netdev;
45 const struct phylink_mac_ops *mac_ops;
46 const struct phylink_pcs_ops *pcs_ops;
47 struct phylink_config *config;
48 struct phylink_pcs *pcs;
49 struct device *dev;
50 unsigned int old_link_state:1;
51
52 unsigned long phylink_disable_state; /* bitmask of disables */
53 struct phy_device *phydev;
54 phy_interface_t link_interface; /* PHY_INTERFACE_xxx */
55 u8 cfg_link_an_mode; /* MLO_AN_xxx */
56 u8 cur_link_an_mode;
57 u8 link_port; /* The current non-phy ethtool port */
58 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
59
60 /* The link configuration settings */
61 struct phylink_link_state link_config;
62
63 /* The current settings */
64 phy_interface_t cur_interface;
65
66 struct gpio_desc *link_gpio;
67 unsigned int link_irq;
68 struct timer_list link_poll;
69 void (*get_fixed_state)(struct net_device *dev,
70 struct phylink_link_state *s);
71
72 struct mutex state_mutex;
73 struct phylink_link_state phy_state;
74 struct work_struct resolve;
75
76 bool mac_link_dropped;
77
78 struct sfp_bus *sfp_bus;
79 bool sfp_may_have_phy;
80 __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
81 u8 sfp_port;
82};
83
84#define phylink_printk(level, pl, fmt, ...) \
85 do { \
86 if ((pl)->config->type == PHYLINK_NETDEV) \
87 netdev_printk(level, (pl)->netdev, fmt, ##__VA_ARGS__); \
88 else if ((pl)->config->type == PHYLINK_DEV) \
89 dev_printk(level, (pl)->dev, fmt, ##__VA_ARGS__); \
90 } while (0)
91
92#define phylink_err(pl, fmt, ...) \
93 phylink_printk(KERN_ERR, pl, fmt, ##__VA_ARGS__)
94#define phylink_warn(pl, fmt, ...) \
95 phylink_printk(KERN_WARNING, pl, fmt, ##__VA_ARGS__)
96#define phylink_info(pl, fmt, ...) \
97 phylink_printk(KERN_INFO, pl, fmt, ##__VA_ARGS__)
98#if defined(CONFIG_DYNAMIC_DEBUG)
99#define phylink_dbg(pl, fmt, ...) \
100do { \
101 if ((pl)->config->type == PHYLINK_NETDEV) \
102 netdev_dbg((pl)->netdev, fmt, ##__VA_ARGS__); \
103 else if ((pl)->config->type == PHYLINK_DEV) \
104 dev_dbg((pl)->dev, fmt, ##__VA_ARGS__); \
105} while (0)
106#elif defined(DEBUG)
107#define phylink_dbg(pl, fmt, ...) \
108 phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__)
109#else
110#define phylink_dbg(pl, fmt, ...) \
111({ \
112 if (0) \
113 phylink_printk(KERN_DEBUG, pl, fmt, ##__VA_ARGS__); \
114})
115#endif
116
117/**
118 * phylink_set_port_modes() - set the port type modes in the ethtool mask
119 * @mask: ethtool link mode mask
120 *
121 * Sets all the port type modes in the ethtool mask. MAC drivers should
122 * use this in their 'validate' callback.
123 */
124void phylink_set_port_modes(unsigned long *mask)
125{
126 phylink_set(mask, TP);
127 phylink_set(mask, AUI);
128 phylink_set(mask, MII);
129 phylink_set(mask, FIBRE);
130 phylink_set(mask, BNC);
131 phylink_set(mask, Backplane);
132}
133EXPORT_SYMBOL_GPL(phylink_set_port_modes);
134
135static int phylink_is_empty_linkmode(const unsigned long *linkmode)
136{
137 __ETHTOOL_DECLARE_LINK_MODE_MASK(tmp) = { 0, };
138
139 phylink_set_port_modes(tmp);
140 phylink_set(tmp, Autoneg);
141 phylink_set(tmp, Pause);
142 phylink_set(tmp, Asym_Pause);
143
144 return linkmode_subset(linkmode, tmp);
145}
146
147static const char *phylink_an_mode_str(unsigned int mode)
148{
149 static const char *modestr[] = {
150 [MLO_AN_PHY] = "phy",
151 [MLO_AN_FIXED] = "fixed",
152 [MLO_AN_INBAND] = "inband",
153 };
154
155 return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown";
156}
157
158static int phylink_validate(struct phylink *pl, unsigned long *supported,
159 struct phylink_link_state *state)
160{
161 pl->mac_ops->validate(pl->config, supported, state);
162
163 return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
164}
165
166static int phylink_parse_fixedlink(struct phylink *pl,
167 struct fwnode_handle *fwnode)
168{
169 struct fwnode_handle *fixed_node;
170 const struct phy_setting *s;
171 struct gpio_desc *desc;
172 u32 speed;
173 int ret;
174
175 fixed_node = fwnode_get_named_child_node(fwnode, "fixed-link");
176 if (fixed_node) {
177 ret = fwnode_property_read_u32(fixed_node, "speed", &speed);
178
179 pl->link_config.speed = speed;
180 pl->link_config.duplex = DUPLEX_HALF;
181
182 if (fwnode_property_read_bool(fixed_node, "full-duplex"))
183 pl->link_config.duplex = DUPLEX_FULL;
184
185 /* We treat the "pause" and "asym-pause" terminology as
186 * defining the link partner's ability.
187 */
188 if (fwnode_property_read_bool(fixed_node, "pause"))
189 __set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
190 pl->link_config.lp_advertising);
191 if (fwnode_property_read_bool(fixed_node, "asym-pause"))
192 __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
193 pl->link_config.lp_advertising);
194
195 if (ret == 0) {
196 desc = fwnode_gpiod_get_index(fixed_node, "link", 0,
197 GPIOD_IN, "?");
198
199 if (!IS_ERR(desc))
200 pl->link_gpio = desc;
201 else if (desc == ERR_PTR(-EPROBE_DEFER))
202 ret = -EPROBE_DEFER;
203 }
204 fwnode_handle_put(fixed_node);
205
206 if (ret)
207 return ret;
208 } else {
209 u32 prop[5];
210
211 ret = fwnode_property_read_u32_array(fwnode, "fixed-link",
212 NULL, 0);
213 if (ret != ARRAY_SIZE(prop)) {
214 phylink_err(pl, "broken fixed-link?\n");
215 return -EINVAL;
216 }
217
218 ret = fwnode_property_read_u32_array(fwnode, "fixed-link",
219 prop, ARRAY_SIZE(prop));
220 if (!ret) {
221 pl->link_config.duplex = prop[1] ?
222 DUPLEX_FULL : DUPLEX_HALF;
223 pl->link_config.speed = prop[2];
224 if (prop[3])
225 __set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
226 pl->link_config.lp_advertising);
227 if (prop[4])
228 __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
229 pl->link_config.lp_advertising);
230 }
231 }
232
233 if (pl->link_config.speed > SPEED_1000 &&
234 pl->link_config.duplex != DUPLEX_FULL)
235 phylink_warn(pl, "fixed link specifies half duplex for %dMbps link?\n",
236 pl->link_config.speed);
237
238 bitmap_fill(pl->supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
239 linkmode_copy(pl->link_config.advertising, pl->supported);
240 phylink_validate(pl, pl->supported, &pl->link_config);
241
242 s = phy_lookup_setting(pl->link_config.speed, pl->link_config.duplex,
243 pl->supported, true);
244 linkmode_zero(pl->supported);
245 phylink_set(pl->supported, MII);
246 phylink_set(pl->supported, Pause);
247 phylink_set(pl->supported, Asym_Pause);
248 phylink_set(pl->supported, Autoneg);
249 if (s) {
250 __set_bit(s->bit, pl->supported);
251 __set_bit(s->bit, pl->link_config.lp_advertising);
252 } else {
253 phylink_warn(pl, "fixed link %s duplex %dMbps not recognised\n",
254 pl->link_config.duplex == DUPLEX_FULL ? "full" : "half",
255 pl->link_config.speed);
256 }
257
258 linkmode_and(pl->link_config.advertising, pl->link_config.advertising,
259 pl->supported);
260
261 pl->link_config.link = 1;
262 pl->link_config.an_complete = 1;
263
264 return 0;
265}
266
267static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
268{
269 struct fwnode_handle *dn;
270 const char *managed;
271
272 dn = fwnode_get_named_child_node(fwnode, "fixed-link");
273 if (dn || fwnode_property_present(fwnode, "fixed-link"))
274 pl->cfg_link_an_mode = MLO_AN_FIXED;
275 fwnode_handle_put(dn);
276
277 if ((fwnode_property_read_string(fwnode, "managed", &managed) == 0 &&
278 strcmp(managed, "in-band-status") == 0) ||
279 pl->config->ovr_an_inband) {
280 if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
281 phylink_err(pl,
282 "can't use both fixed-link and in-band-status\n");
283 return -EINVAL;
284 }
285
286 linkmode_zero(pl->supported);
287 phylink_set(pl->supported, MII);
288 phylink_set(pl->supported, Autoneg);
289 phylink_set(pl->supported, Asym_Pause);
290 phylink_set(pl->supported, Pause);
291 pl->link_config.an_enabled = true;
292 pl->cfg_link_an_mode = MLO_AN_INBAND;
293
294 switch (pl->link_config.interface) {
295 case PHY_INTERFACE_MODE_SGMII:
296 case PHY_INTERFACE_MODE_QSGMII:
297 phylink_set(pl->supported, 10baseT_Half);
298 phylink_set(pl->supported, 10baseT_Full);
299 phylink_set(pl->supported, 100baseT_Half);
300 phylink_set(pl->supported, 100baseT_Full);
301 phylink_set(pl->supported, 1000baseT_Half);
302 phylink_set(pl->supported, 1000baseT_Full);
303 break;
304
305 case PHY_INTERFACE_MODE_1000BASEX:
306 phylink_set(pl->supported, 1000baseX_Full);
307 break;
308
309 case PHY_INTERFACE_MODE_2500BASEX:
310 phylink_set(pl->supported, 2500baseX_Full);
311 break;
312
313 case PHY_INTERFACE_MODE_5GBASER:
314 phylink_set(pl->supported, 5000baseT_Full);
315 break;
316
317 case PHY_INTERFACE_MODE_25GBASER:
318 phylink_set(pl->supported, 25000baseCR_Full);
319 phylink_set(pl->supported, 25000baseKR_Full);
320 phylink_set(pl->supported, 25000baseSR_Full);
321 fallthrough;
322 case PHY_INTERFACE_MODE_USXGMII:
323 case PHY_INTERFACE_MODE_10GKR:
324 case PHY_INTERFACE_MODE_10GBASER:
325 phylink_set(pl->supported, 10baseT_Half);
326 phylink_set(pl->supported, 10baseT_Full);
327 phylink_set(pl->supported, 100baseT_Half);
328 phylink_set(pl->supported, 100baseT_Full);
329 phylink_set(pl->supported, 1000baseT_Half);
330 phylink_set(pl->supported, 1000baseT_Full);
331 phylink_set(pl->supported, 1000baseX_Full);
332 phylink_set(pl->supported, 1000baseKX_Full);
333 phylink_set(pl->supported, 2500baseT_Full);
334 phylink_set(pl->supported, 2500baseX_Full);
335 phylink_set(pl->supported, 5000baseT_Full);
336 phylink_set(pl->supported, 10000baseT_Full);
337 phylink_set(pl->supported, 10000baseKR_Full);
338 phylink_set(pl->supported, 10000baseKX4_Full);
339 phylink_set(pl->supported, 10000baseCR_Full);
340 phylink_set(pl->supported, 10000baseSR_Full);
341 phylink_set(pl->supported, 10000baseLR_Full);
342 phylink_set(pl->supported, 10000baseLRM_Full);
343 phylink_set(pl->supported, 10000baseER_Full);
344 break;
345
346 case PHY_INTERFACE_MODE_XLGMII:
347 phylink_set(pl->supported, 25000baseCR_Full);
348 phylink_set(pl->supported, 25000baseKR_Full);
349 phylink_set(pl->supported, 25000baseSR_Full);
350 phylink_set(pl->supported, 40000baseKR4_Full);
351 phylink_set(pl->supported, 40000baseCR4_Full);
352 phylink_set(pl->supported, 40000baseSR4_Full);
353 phylink_set(pl->supported, 40000baseLR4_Full);
354 phylink_set(pl->supported, 50000baseCR2_Full);
355 phylink_set(pl->supported, 50000baseKR2_Full);
356 phylink_set(pl->supported, 50000baseSR2_Full);
357 phylink_set(pl->supported, 50000baseKR_Full);
358 phylink_set(pl->supported, 50000baseSR_Full);
359 phylink_set(pl->supported, 50000baseCR_Full);
360 phylink_set(pl->supported, 50000baseLR_ER_FR_Full);
361 phylink_set(pl->supported, 50000baseDR_Full);
362 phylink_set(pl->supported, 100000baseKR4_Full);
363 phylink_set(pl->supported, 100000baseSR4_Full);
364 phylink_set(pl->supported, 100000baseCR4_Full);
365 phylink_set(pl->supported, 100000baseLR4_ER4_Full);
366 phylink_set(pl->supported, 100000baseKR2_Full);
367 phylink_set(pl->supported, 100000baseSR2_Full);
368 phylink_set(pl->supported, 100000baseCR2_Full);
369 phylink_set(pl->supported, 100000baseLR2_ER2_FR2_Full);
370 phylink_set(pl->supported, 100000baseDR2_Full);
371 break;
372
373 default:
374 phylink_err(pl,
375 "incorrect link mode %s for in-band status\n",
376 phy_modes(pl->link_config.interface));
377 return -EINVAL;
378 }
379
380 linkmode_copy(pl->link_config.advertising, pl->supported);
381
382 if (phylink_validate(pl, pl->supported, &pl->link_config)) {
383 phylink_err(pl,
384 "failed to validate link configuration for in-band status\n");
385 return -EINVAL;
386 }
387
388 /* Check if MAC/PCS also supports Autoneg. */
389 pl->link_config.an_enabled = phylink_test(pl->supported, Autoneg);
390 }
391
392 return 0;
393}
394
395static void phylink_apply_manual_flow(struct phylink *pl,
396 struct phylink_link_state *state)
397{
398 /* If autoneg is disabled, pause AN is also disabled */
399 if (!state->an_enabled)
400 state->pause &= ~MLO_PAUSE_AN;
401
402 /* Manual configuration of pause modes */
403 if (!(pl->link_config.pause & MLO_PAUSE_AN))
404 state->pause = pl->link_config.pause;
405}
406
407static void phylink_resolve_flow(struct phylink_link_state *state)
408{
409 bool tx_pause, rx_pause;
410
411 state->pause = MLO_PAUSE_NONE;
412 if (state->duplex == DUPLEX_FULL) {
413 linkmode_resolve_pause(state->advertising,
414 state->lp_advertising,
415 &tx_pause, &rx_pause);
416 if (tx_pause)
417 state->pause |= MLO_PAUSE_TX;
418 if (rx_pause)
419 state->pause |= MLO_PAUSE_RX;
420 }
421}
422
423static void phylink_mac_config(struct phylink *pl,
424 const struct phylink_link_state *state)
425{
426 phylink_dbg(pl,
427 "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
428 __func__, phylink_an_mode_str(pl->cur_link_an_mode),
429 phy_modes(state->interface),
430 phy_speed_to_str(state->speed),
431 phy_duplex_to_str(state->duplex),
432 __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
433 state->pause, state->link, state->an_enabled);
434
435 pl->mac_ops->mac_config(pl->config, pl->cur_link_an_mode, state);
436}
437
438static void phylink_mac_pcs_an_restart(struct phylink *pl)
439{
440 if (pl->link_config.an_enabled &&
441 phy_interface_mode_is_8023z(pl->link_config.interface) &&
442 phylink_autoneg_inband(pl->cur_link_an_mode)) {
443 if (pl->pcs_ops)
444 pl->pcs_ops->pcs_an_restart(pl->pcs);
445 else
446 pl->mac_ops->mac_an_restart(pl->config);
447 }
448}
449
450static void phylink_major_config(struct phylink *pl, bool restart,
451 const struct phylink_link_state *state)
452{
453 int err;
454
455 phylink_dbg(pl, "major config %s\n", phy_modes(state->interface));
456
457 if (pl->mac_ops->mac_prepare) {
458 err = pl->mac_ops->mac_prepare(pl->config, pl->cur_link_an_mode,
459 state->interface);
460 if (err < 0) {
461 phylink_err(pl, "mac_prepare failed: %pe\n",
462 ERR_PTR(err));
463 return;
464 }
465 }
466
467 phylink_mac_config(pl, state);
468
469 if (pl->pcs_ops) {
470 err = pl->pcs_ops->pcs_config(pl->pcs, pl->cur_link_an_mode,
471 state->interface,
472 state->advertising,
473 !!(pl->link_config.pause &
474 MLO_PAUSE_AN));
475 if (err < 0)
476 phylink_err(pl, "pcs_config failed: %pe\n",
477 ERR_PTR(err));
478 if (err > 0)
479 restart = true;
480 }
481 if (restart)
482 phylink_mac_pcs_an_restart(pl);
483
484 if (pl->mac_ops->mac_finish) {
485 err = pl->mac_ops->mac_finish(pl->config, pl->cur_link_an_mode,
486 state->interface);
487 if (err < 0)
488 phylink_err(pl, "mac_finish failed: %pe\n",
489 ERR_PTR(err));
490 }
491}
492
493/*
494 * Reconfigure for a change of inband advertisement.
495 * If we have a separate PCS, we only need to call its pcs_config() method,
496 * and then restart AN if it indicates something changed. Otherwise, we do
497 * the full MAC reconfiguration.
498 */
499static int phylink_change_inband_advert(struct phylink *pl)
500{
501 int ret;
502
503 if (test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state))
504 return 0;
505
506 if (!pl->pcs_ops) {
507 /* Legacy method */
508 phylink_mac_config(pl, &pl->link_config);
509 phylink_mac_pcs_an_restart(pl);
510 return 0;
511 }
512
513 phylink_dbg(pl, "%s: mode=%s/%s adv=%*pb pause=%02x\n", __func__,
514 phylink_an_mode_str(pl->cur_link_an_mode),
515 phy_modes(pl->link_config.interface),
516 __ETHTOOL_LINK_MODE_MASK_NBITS, pl->link_config.advertising,
517 pl->link_config.pause);
518
519 /* Modern PCS-based method; update the advert at the PCS, and
520 * restart negotiation if the pcs_config() helper indicates that
521 * the programmed advertisement has changed.
522 */
523 ret = pl->pcs_ops->pcs_config(pl->pcs, pl->cur_link_an_mode,
524 pl->link_config.interface,
525 pl->link_config.advertising,
526 !!(pl->link_config.pause & MLO_PAUSE_AN));
527 if (ret < 0)
528 return ret;
529
530 if (ret > 0)
531 phylink_mac_pcs_an_restart(pl);
532
533 return 0;
534}
535
536static void phylink_mac_pcs_get_state(struct phylink *pl,
537 struct phylink_link_state *state)
538{
539 linkmode_copy(state->advertising, pl->link_config.advertising);
540 linkmode_zero(state->lp_advertising);
541 state->interface = pl->link_config.interface;
542 state->an_enabled = pl->link_config.an_enabled;
543 state->speed = SPEED_UNKNOWN;
544 state->duplex = DUPLEX_UNKNOWN;
545 state->pause = MLO_PAUSE_NONE;
546 state->an_complete = 0;
547 state->link = 1;
548
549 if (pl->pcs_ops)
550 pl->pcs_ops->pcs_get_state(pl->pcs, state);
551 else if (pl->mac_ops->mac_pcs_get_state)
552 pl->mac_ops->mac_pcs_get_state(pl->config, state);
553 else
554 state->link = 0;
555}
556
557/* The fixed state is... fixed except for the link state,
558 * which may be determined by a GPIO or a callback.
559 */
560static void phylink_get_fixed_state(struct phylink *pl,
561 struct phylink_link_state *state)
562{
563 *state = pl->link_config;
564 if (pl->config->get_fixed_state)
565 pl->config->get_fixed_state(pl->config, state);
566 else if (pl->link_gpio)
567 state->link = !!gpiod_get_value_cansleep(pl->link_gpio);
568
569 phylink_resolve_flow(state);
570}
571
572static void phylink_mac_initial_config(struct phylink *pl, bool force_restart)
573{
574 struct phylink_link_state link_state;
575
576 switch (pl->cur_link_an_mode) {
577 case MLO_AN_PHY:
578 link_state = pl->phy_state;
579 break;
580
581 case MLO_AN_FIXED:
582 phylink_get_fixed_state(pl, &link_state);
583 break;
584
585 case MLO_AN_INBAND:
586 link_state = pl->link_config;
587 if (link_state.interface == PHY_INTERFACE_MODE_SGMII)
588 link_state.pause = MLO_PAUSE_NONE;
589 break;
590
591 default: /* can't happen */
592 return;
593 }
594
595 link_state.link = false;
596
597 phylink_apply_manual_flow(pl, &link_state);
598 phylink_major_config(pl, force_restart, &link_state);
599}
600
601static const char *phylink_pause_to_str(int pause)
602{
603 switch (pause & MLO_PAUSE_TXRX_MASK) {
604 case MLO_PAUSE_TX | MLO_PAUSE_RX:
605 return "rx/tx";
606 case MLO_PAUSE_TX:
607 return "tx";
608 case MLO_PAUSE_RX:
609 return "rx";
610 default:
611 return "off";
612 }
613}
614
615static void phylink_link_up(struct phylink *pl,
616 struct phylink_link_state link_state)
617{
618 struct net_device *ndev = pl->netdev;
619
620 pl->cur_interface = link_state.interface;
621
622 if (pl->pcs_ops && pl->pcs_ops->pcs_link_up)
623 pl->pcs_ops->pcs_link_up(pl->pcs, pl->cur_link_an_mode,
624 pl->cur_interface,
625 link_state.speed, link_state.duplex);
626
627 pl->mac_ops->mac_link_up(pl->config, pl->phydev,
628 pl->cur_link_an_mode, pl->cur_interface,
629 link_state.speed, link_state.duplex,
630 !!(link_state.pause & MLO_PAUSE_TX),
631 !!(link_state.pause & MLO_PAUSE_RX));
632
633 if (ndev)
634 netif_carrier_on(ndev);
635
636 phylink_info(pl,
637 "Link is Up - %s/%s - flow control %s\n",
638 phy_speed_to_str(link_state.speed),
639 phy_duplex_to_str(link_state.duplex),
640 phylink_pause_to_str(link_state.pause));
641}
642
643static void phylink_link_down(struct phylink *pl)
644{
645 struct net_device *ndev = pl->netdev;
646
647 if (ndev)
648 netif_carrier_off(ndev);
649 pl->mac_ops->mac_link_down(pl->config, pl->cur_link_an_mode,
650 pl->cur_interface);
651 phylink_info(pl, "Link is Down\n");
652}
653
654static void phylink_resolve(struct work_struct *w)
655{
656 struct phylink *pl = container_of(w, struct phylink, resolve);
657 struct phylink_link_state link_state;
658 struct net_device *ndev = pl->netdev;
659 bool mac_config = false;
660 bool cur_link_state;
661
662 mutex_lock(&pl->state_mutex);
663 if (pl->netdev)
664 cur_link_state = netif_carrier_ok(ndev);
665 else
666 cur_link_state = pl->old_link_state;
667
668 if (pl->phylink_disable_state) {
669 pl->mac_link_dropped = false;
670 link_state.link = false;
671 } else if (pl->mac_link_dropped) {
672 link_state.link = false;
673 } else {
674 switch (pl->cur_link_an_mode) {
675 case MLO_AN_PHY:
676 link_state = pl->phy_state;
677 phylink_apply_manual_flow(pl, &link_state);
678 mac_config = link_state.link;
679 break;
680
681 case MLO_AN_FIXED:
682 phylink_get_fixed_state(pl, &link_state);
683 mac_config = link_state.link;
684 break;
685
686 case MLO_AN_INBAND:
687 phylink_mac_pcs_get_state(pl, &link_state);
688
689 /* If we have a phy, the "up" state is the union of
690 * both the PHY and the MAC
691 */
692 if (pl->phydev)
693 link_state.link &= pl->phy_state.link;
694
695 /* Only update if the PHY link is up */
696 if (pl->phydev && pl->phy_state.link) {
697 link_state.interface = pl->phy_state.interface;
698
699 /* If we have a PHY, we need to update with
700 * the PHY flow control bits.
701 */
702 link_state.pause = pl->phy_state.pause;
703 mac_config = true;
704 }
705 phylink_apply_manual_flow(pl, &link_state);
706 break;
707 }
708 }
709
710 if (mac_config) {
711 if (link_state.interface != pl->link_config.interface) {
712 /* The interface has changed, force the link down and
713 * then reconfigure.
714 */
715 if (cur_link_state) {
716 phylink_link_down(pl);
717 cur_link_state = false;
718 }
719 phylink_major_config(pl, false, &link_state);
720 pl->link_config.interface = link_state.interface;
721 } else if (!pl->pcs_ops) {
722 /* The interface remains unchanged, only the speed,
723 * duplex or pause settings have changed. Call the
724 * old mac_config() method to configure the MAC/PCS
725 * only if we do not have a PCS installed (an
726 * unconverted user.)
727 */
728 phylink_mac_config(pl, &link_state);
729 }
730 }
731
732 if (link_state.link != cur_link_state) {
733 pl->old_link_state = link_state.link;
734 if (!link_state.link)
735 phylink_link_down(pl);
736 else
737 phylink_link_up(pl, link_state);
738 }
739 if (!link_state.link && pl->mac_link_dropped) {
740 pl->mac_link_dropped = false;
741 queue_work(system_power_efficient_wq, &pl->resolve);
742 }
743 mutex_unlock(&pl->state_mutex);
744}
745
746static void phylink_run_resolve(struct phylink *pl)
747{
748 if (!pl->phylink_disable_state)
749 queue_work(system_power_efficient_wq, &pl->resolve);
750}
751
752static void phylink_run_resolve_and_disable(struct phylink *pl, int bit)
753{
754 unsigned long state = pl->phylink_disable_state;
755
756 set_bit(bit, &pl->phylink_disable_state);
757 if (state == 0) {
758 queue_work(system_power_efficient_wq, &pl->resolve);
759 flush_work(&pl->resolve);
760 }
761}
762
763static void phylink_fixed_poll(struct timer_list *t)
764{
765 struct phylink *pl = container_of(t, struct phylink, link_poll);
766
767 mod_timer(t, jiffies + HZ);
768
769 phylink_run_resolve(pl);
770}
771
772static const struct sfp_upstream_ops sfp_phylink_ops;
773
774static int phylink_register_sfp(struct phylink *pl,
775 struct fwnode_handle *fwnode)
776{
777 struct sfp_bus *bus;
778 int ret;
779
780 if (!fwnode)
781 return 0;
782
783 bus = sfp_bus_find_fwnode(fwnode);
784 if (IS_ERR(bus)) {
785 ret = PTR_ERR(bus);
786 phylink_err(pl, "unable to attach SFP bus: %d\n", ret);
787 return ret;
788 }
789
790 pl->sfp_bus = bus;
791
792 ret = sfp_bus_add_upstream(bus, pl, &sfp_phylink_ops);
793 sfp_bus_put(bus);
794
795 return ret;
796}
797
798/**
799 * phylink_create() - create a phylink instance
800 * @config: a pointer to the target &struct phylink_config
801 * @fwnode: a pointer to a &struct fwnode_handle describing the network
802 * interface
803 * @iface: the desired link mode defined by &typedef phy_interface_t
804 * @mac_ops: a pointer to a &struct phylink_mac_ops for the MAC.
805 *
806 * Create a new phylink instance, and parse the link parameters found in @np.
807 * This will parse in-band modes, fixed-link or SFP configuration.
808 *
809 * Note: the rtnl lock must not be held when calling this function.
810 *
811 * Returns a pointer to a &struct phylink, or an error-pointer value. Users
812 * must use IS_ERR() to check for errors from this function.
813 */
814struct phylink *phylink_create(struct phylink_config *config,
815 struct fwnode_handle *fwnode,
816 phy_interface_t iface,
817 const struct phylink_mac_ops *mac_ops)
818{
819 struct phylink *pl;
820 int ret;
821
822 pl = kzalloc(sizeof(*pl), GFP_KERNEL);
823 if (!pl)
824 return ERR_PTR(-ENOMEM);
825
826 mutex_init(&pl->state_mutex);
827 INIT_WORK(&pl->resolve, phylink_resolve);
828
829 pl->config = config;
830 if (config->type == PHYLINK_NETDEV) {
831 pl->netdev = to_net_dev(config->dev);
832 } else if (config->type == PHYLINK_DEV) {
833 pl->dev = config->dev;
834 } else {
835 kfree(pl);
836 return ERR_PTR(-EINVAL);
837 }
838
839 pl->phy_state.interface = iface;
840 pl->link_interface = iface;
841 if (iface == PHY_INTERFACE_MODE_MOCA)
842 pl->link_port = PORT_BNC;
843 else
844 pl->link_port = PORT_MII;
845 pl->link_config.interface = iface;
846 pl->link_config.pause = MLO_PAUSE_AN;
847 pl->link_config.speed = SPEED_UNKNOWN;
848 pl->link_config.duplex = DUPLEX_UNKNOWN;
849 pl->link_config.an_enabled = true;
850 pl->mac_ops = mac_ops;
851 __set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
852 timer_setup(&pl->link_poll, phylink_fixed_poll, 0);
853
854 bitmap_fill(pl->supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
855 linkmode_copy(pl->link_config.advertising, pl->supported);
856 phylink_validate(pl, pl->supported, &pl->link_config);
857
858 ret = phylink_parse_mode(pl, fwnode);
859 if (ret < 0) {
860 kfree(pl);
861 return ERR_PTR(ret);
862 }
863
864 if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
865 ret = phylink_parse_fixedlink(pl, fwnode);
866 if (ret < 0) {
867 kfree(pl);
868 return ERR_PTR(ret);
869 }
870 }
871
872 pl->cur_link_an_mode = pl->cfg_link_an_mode;
873
874 ret = phylink_register_sfp(pl, fwnode);
875 if (ret < 0) {
876 kfree(pl);
877 return ERR_PTR(ret);
878 }
879
880 return pl;
881}
882EXPORT_SYMBOL_GPL(phylink_create);
883
884/**
885 * phylink_set_pcs() - set the current PCS for phylink to use
886 * @pl: a pointer to a &struct phylink returned from phylink_create()
887 * @pcs: a pointer to the &struct phylink_pcs
888 *
889 * Bind the MAC PCS to phylink. This may be called after phylink_create(),
890 * in mac_prepare() or mac_config() methods if it is desired to dynamically
891 * change the PCS.
892 *
893 * Please note that there are behavioural changes with the mac_config()
894 * callback if a PCS is present (denoting a newer setup) so removing a PCS
895 * is not supported, and if a PCS is going to be used, it must be registered
896 * by calling phylink_set_pcs() at the latest in the first mac_config() call.
897 */
898void phylink_set_pcs(struct phylink *pl, struct phylink_pcs *pcs)
899{
900 pl->pcs = pcs;
901 pl->pcs_ops = pcs->ops;
902}
903EXPORT_SYMBOL_GPL(phylink_set_pcs);
904
905/**
906 * phylink_destroy() - cleanup and destroy the phylink instance
907 * @pl: a pointer to a &struct phylink returned from phylink_create()
908 *
909 * Destroy a phylink instance. Any PHY that has been attached must have been
910 * cleaned up via phylink_disconnect_phy() prior to calling this function.
911 *
912 * Note: the rtnl lock must not be held when calling this function.
913 */
914void phylink_destroy(struct phylink *pl)
915{
916 sfp_bus_del_upstream(pl->sfp_bus);
917 if (pl->link_gpio)
918 gpiod_put(pl->link_gpio);
919
920 cancel_work_sync(&pl->resolve);
921 kfree(pl);
922}
923EXPORT_SYMBOL_GPL(phylink_destroy);
924
925static void phylink_phy_change(struct phy_device *phydev, bool up)
926{
927 struct phylink *pl = phydev->phylink;
928 bool tx_pause, rx_pause;
929
930 phy_get_pause(phydev, &tx_pause, &rx_pause);
931
932 mutex_lock(&pl->state_mutex);
933 pl->phy_state.speed = phydev->speed;
934 pl->phy_state.duplex = phydev->duplex;
935 pl->phy_state.pause = MLO_PAUSE_NONE;
936 if (tx_pause)
937 pl->phy_state.pause |= MLO_PAUSE_TX;
938 if (rx_pause)
939 pl->phy_state.pause |= MLO_PAUSE_RX;
940 pl->phy_state.interface = phydev->interface;
941 pl->phy_state.link = up;
942 mutex_unlock(&pl->state_mutex);
943
944 phylink_run_resolve(pl);
945
946 phylink_dbg(pl, "phy link %s %s/%s/%s\n", up ? "up" : "down",
947 phy_modes(phydev->interface),
948 phy_speed_to_str(phydev->speed),
949 phy_duplex_to_str(phydev->duplex));
950}
951
952static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
953 phy_interface_t interface)
954{
955 struct phylink_link_state config;
956 __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
957 char *irq_str;
958 int ret;
959
960 /*
961 * This is the new way of dealing with flow control for PHYs,
962 * as described by Timur Tabi in commit 529ed1275263 ("net: phy:
963 * phy drivers should not set SUPPORTED_[Asym_]Pause") except
964 * using our validate call to the MAC, we rely upon the MAC
965 * clearing the bits from both supported and advertising fields.
966 */
967 phy_support_asym_pause(phy);
968
969 memset(&config, 0, sizeof(config));
970 linkmode_copy(supported, phy->supported);
971 linkmode_copy(config.advertising, phy->advertising);
972
973 /* Clause 45 PHYs switch their Serdes lane between several different
974 * modes, normally 10GBASE-R, SGMII. Some use 2500BASE-X for 2.5G
975 * speeds. We really need to know which interface modes the PHY and
976 * MAC supports to properly work out which linkmodes can be supported.
977 */
978 if (phy->is_c45 &&
979 interface != PHY_INTERFACE_MODE_RXAUI &&
980 interface != PHY_INTERFACE_MODE_XAUI &&
981 interface != PHY_INTERFACE_MODE_USXGMII)
982 config.interface = PHY_INTERFACE_MODE_NA;
983 else
984 config.interface = interface;
985
986 ret = phylink_validate(pl, supported, &config);
987 if (ret) {
988 phylink_warn(pl, "validation of %s with support %*pb and advertisement %*pb failed: %d\n",
989 phy_modes(config.interface),
990 __ETHTOOL_LINK_MODE_MASK_NBITS, phy->supported,
991 __ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising,
992 ret);
993 return ret;
994 }
995
996 phy->phylink = pl;
997 phy->phy_link_change = phylink_phy_change;
998
999 irq_str = phy_attached_info_irq(phy);
1000 phylink_info(pl,
1001 "PHY [%s] driver [%s] (irq=%s)\n",
1002 dev_name(&phy->mdio.dev), phy->drv->name, irq_str);
1003 kfree(irq_str);
1004
1005 mutex_lock(&phy->lock);
1006 mutex_lock(&pl->state_mutex);
1007 pl->phydev = phy;
1008 pl->phy_state.interface = interface;
1009 pl->phy_state.pause = MLO_PAUSE_NONE;
1010 pl->phy_state.speed = SPEED_UNKNOWN;
1011 pl->phy_state.duplex = DUPLEX_UNKNOWN;
1012 linkmode_copy(pl->supported, supported);
1013 linkmode_copy(pl->link_config.advertising, config.advertising);
1014
1015 /* Restrict the phy advertisement according to the MAC support. */
1016 linkmode_copy(phy->advertising, config.advertising);
1017 mutex_unlock(&pl->state_mutex);
1018 mutex_unlock(&phy->lock);
1019
1020 phylink_dbg(pl,
1021 "phy: setting supported %*pb advertising %*pb\n",
1022 __ETHTOOL_LINK_MODE_MASK_NBITS, pl->supported,
1023 __ETHTOOL_LINK_MODE_MASK_NBITS, phy->advertising);
1024
1025 if (phy_interrupt_is_valid(phy))
1026 phy_request_interrupt(phy);
1027
1028 return 0;
1029}
1030
1031static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
1032 phy_interface_t interface)
1033{
1034 if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED ||
1035 (pl->cfg_link_an_mode == MLO_AN_INBAND &&
1036 phy_interface_mode_is_8023z(interface))))
1037 return -EINVAL;
1038
1039 if (pl->phydev)
1040 return -EBUSY;
1041
1042 return phy_attach_direct(pl->netdev, phy, 0, interface);
1043}
1044
1045/**
1046 * phylink_connect_phy() - connect a PHY to the phylink instance
1047 * @pl: a pointer to a &struct phylink returned from phylink_create()
1048 * @phy: a pointer to a &struct phy_device.
1049 *
1050 * Connect @phy to the phylink instance specified by @pl by calling
1051 * phy_attach_direct(). Configure the @phy according to the MAC driver's
1052 * capabilities, start the PHYLIB state machine and enable any interrupts
1053 * that the PHY supports.
1054 *
1055 * This updates the phylink's ethtool supported and advertising link mode
1056 * masks.
1057 *
1058 * Returns 0 on success or a negative errno.
1059 */
1060int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
1061{
1062 int ret;
1063
1064 /* Use PHY device/driver interface */
1065 if (pl->link_interface == PHY_INTERFACE_MODE_NA) {
1066 pl->link_interface = phy->interface;
1067 pl->link_config.interface = pl->link_interface;
1068 }
1069
1070 ret = phylink_attach_phy(pl, phy, pl->link_interface);
1071 if (ret < 0)
1072 return ret;
1073
1074 ret = phylink_bringup_phy(pl, phy, pl->link_config.interface);
1075 if (ret)
1076 phy_detach(phy);
1077
1078 return ret;
1079}
1080EXPORT_SYMBOL_GPL(phylink_connect_phy);
1081
1082/**
1083 * phylink_of_phy_connect() - connect the PHY specified in the DT mode.
1084 * @pl: a pointer to a &struct phylink returned from phylink_create()
1085 * @dn: a pointer to a &struct device_node.
1086 * @flags: PHY-specific flags to communicate to the PHY device driver
1087 *
1088 * Connect the phy specified in the device node @dn to the phylink instance
1089 * specified by @pl. Actions specified in phylink_connect_phy() will be
1090 * performed.
1091 *
1092 * Returns 0 on success or a negative errno.
1093 */
1094int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
1095 u32 flags)
1096{
1097 return phylink_fwnode_phy_connect(pl, of_fwnode_handle(dn), flags);
1098}
1099EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
1100
1101/**
1102 * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.
1103 * @pl: a pointer to a &struct phylink returned from phylink_create()
1104 * @fwnode: a pointer to a &struct fwnode_handle.
1105 * @flags: PHY-specific flags to communicate to the PHY device driver
1106 *
1107 * Connect the phy specified @fwnode to the phylink instance specified
1108 * by @pl.
1109 *
1110 * Returns 0 on success or a negative errno.
1111 */
1112int phylink_fwnode_phy_connect(struct phylink *pl,
1113 struct fwnode_handle *fwnode,
1114 u32 flags)
1115{
1116 struct fwnode_handle *phy_fwnode;
1117 struct phy_device *phy_dev;
1118 int ret;
1119
1120 /* Fixed links and 802.3z are handled without needing a PHY */
1121 if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
1122 (pl->cfg_link_an_mode == MLO_AN_INBAND &&
1123 phy_interface_mode_is_8023z(pl->link_interface)))
1124 return 0;
1125
1126 phy_fwnode = fwnode_get_phy_node(fwnode);
1127 if (IS_ERR(phy_fwnode)) {
1128 if (pl->cfg_link_an_mode == MLO_AN_PHY)
1129 return -ENODEV;
1130 return 0;
1131 }
1132
1133 phy_dev = fwnode_phy_find_device(phy_fwnode);
1134 /* We're done with the phy_node handle */
1135 fwnode_handle_put(phy_fwnode);
1136 if (!phy_dev)
1137 return -ENODEV;
1138
1139 ret = phy_attach_direct(pl->netdev, phy_dev, flags,
1140 pl->link_interface);
1141 if (ret) {
1142 phy_device_free(phy_dev);
1143 return ret;
1144 }
1145
1146 ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
1147 if (ret)
1148 phy_detach(phy_dev);
1149
1150 return ret;
1151}
1152EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect);
1153
1154/**
1155 * phylink_disconnect_phy() - disconnect any PHY attached to the phylink
1156 * instance.
1157 * @pl: a pointer to a &struct phylink returned from phylink_create()
1158 *
1159 * Disconnect any current PHY from the phylink instance described by @pl.
1160 */
1161void phylink_disconnect_phy(struct phylink *pl)
1162{
1163 struct phy_device *phy;
1164
1165 ASSERT_RTNL();
1166
1167 phy = pl->phydev;
1168 if (phy) {
1169 mutex_lock(&phy->lock);
1170 mutex_lock(&pl->state_mutex);
1171 pl->phydev = NULL;
1172 mutex_unlock(&pl->state_mutex);
1173 mutex_unlock(&phy->lock);
1174 flush_work(&pl->resolve);
1175
1176 phy_disconnect(phy);
1177 }
1178}
1179EXPORT_SYMBOL_GPL(phylink_disconnect_phy);
1180
1181/**
1182 * phylink_mac_change() - notify phylink of a change in MAC state
1183 * @pl: a pointer to a &struct phylink returned from phylink_create()
1184 * @up: indicates whether the link is currently up.
1185 *
1186 * The MAC driver should call this driver when the state of its link
1187 * changes (eg, link failure, new negotiation results, etc.)
1188 */
1189void phylink_mac_change(struct phylink *pl, bool up)
1190{
1191 if (!up)
1192 pl->mac_link_dropped = true;
1193 phylink_run_resolve(pl);
1194 phylink_dbg(pl, "mac link %s\n", up ? "up" : "down");
1195}
1196EXPORT_SYMBOL_GPL(phylink_mac_change);
1197
1198static irqreturn_t phylink_link_handler(int irq, void *data)
1199{
1200 struct phylink *pl = data;
1201
1202 phylink_run_resolve(pl);
1203
1204 return IRQ_HANDLED;
1205}
1206
1207/**
1208 * phylink_start() - start a phylink instance
1209 * @pl: a pointer to a &struct phylink returned from phylink_create()
1210 *
1211 * Start the phylink instance specified by @pl, configuring the MAC for the
1212 * desired link mode(s) and negotiation style. This should be called from the
1213 * network device driver's &struct net_device_ops ndo_open() method.
1214 */
1215void phylink_start(struct phylink *pl)
1216{
1217 bool poll = false;
1218
1219 ASSERT_RTNL();
1220
1221 phylink_info(pl, "configuring for %s/%s link mode\n",
1222 phylink_an_mode_str(pl->cur_link_an_mode),
1223 phy_modes(pl->link_config.interface));
1224
1225 /* Always set the carrier off */
1226 if (pl->netdev)
1227 netif_carrier_off(pl->netdev);
1228
1229 /* Apply the link configuration to the MAC when starting. This allows
1230 * a fixed-link to start with the correct parameters, and also
1231 * ensures that we set the appropriate advertisement for Serdes links.
1232 *
1233 * Restart autonegotiation if using 802.3z to ensure that the link
1234 * parameters are properly negotiated. This is necessary for DSA
1235 * switches using 802.3z negotiation to ensure they see our modes.
1236 */
1237 phylink_mac_initial_config(pl, true);
1238
1239 clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
1240 phylink_run_resolve(pl);
1241
1242 if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
1243 int irq = gpiod_to_irq(pl->link_gpio);
1244
1245 if (irq > 0) {
1246 if (!request_irq(irq, phylink_link_handler,
1247 IRQF_TRIGGER_RISING |
1248 IRQF_TRIGGER_FALLING,
1249 "netdev link", pl))
1250 pl->link_irq = irq;
1251 else
1252 irq = 0;
1253 }
1254 if (irq <= 0)
1255 poll = true;
1256 }
1257
1258 switch (pl->cfg_link_an_mode) {
1259 case MLO_AN_FIXED:
1260 poll |= pl->config->poll_fixed_state;
1261 break;
1262 case MLO_AN_INBAND:
1263 poll |= pl->config->pcs_poll;
1264 if (pl->pcs)
1265 poll |= pl->pcs->poll;
1266 break;
1267 }
1268 if (poll)
1269 mod_timer(&pl->link_poll, jiffies + HZ);
1270 if (pl->phydev)
1271 phy_start(pl->phydev);
1272 if (pl->sfp_bus)
1273 sfp_upstream_start(pl->sfp_bus);
1274}
1275EXPORT_SYMBOL_GPL(phylink_start);
1276
1277/**
1278 * phylink_stop() - stop a phylink instance
1279 * @pl: a pointer to a &struct phylink returned from phylink_create()
1280 *
1281 * Stop the phylink instance specified by @pl. This should be called from the
1282 * network device driver's &struct net_device_ops ndo_stop() method. The
1283 * network device's carrier state should not be changed prior to calling this
1284 * function.
1285 *
1286 * This will synchronously bring down the link if the link is not already
1287 * down (in other words, it will trigger a mac_link_down() method call.)
1288 */
1289void phylink_stop(struct phylink *pl)
1290{
1291 ASSERT_RTNL();
1292
1293 if (pl->sfp_bus)
1294 sfp_upstream_stop(pl->sfp_bus);
1295 if (pl->phydev)
1296 phy_stop(pl->phydev);
1297 del_timer_sync(&pl->link_poll);
1298 if (pl->link_irq) {
1299 free_irq(pl->link_irq, pl);
1300 pl->link_irq = 0;
1301 }
1302
1303 phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED);
1304}
1305EXPORT_SYMBOL_GPL(phylink_stop);
1306
1307/**
1308 * phylink_suspend() - handle a network device suspend event
1309 * @pl: a pointer to a &struct phylink returned from phylink_create()
1310 * @mac_wol: true if the MAC needs to receive packets for Wake-on-Lan
1311 *
1312 * Handle a network device suspend event. There are several cases:
1313 * - If Wake-on-Lan is not active, we can bring down the link between
1314 * the MAC and PHY by calling phylink_stop().
1315 * - If Wake-on-Lan is active, and being handled only by the PHY, we
1316 * can also bring down the link between the MAC and PHY.
1317 * - If Wake-on-Lan is active, but being handled by the MAC, the MAC
1318 * still needs to receive packets, so we can not bring the link down.
1319 */
1320void phylink_suspend(struct phylink *pl, bool mac_wol)
1321{
1322 ASSERT_RTNL();
1323
1324 if (mac_wol && (!pl->netdev || pl->netdev->wol_enabled)) {
1325 /* Wake-on-Lan enabled, MAC handling */
1326 mutex_lock(&pl->state_mutex);
1327
1328 /* Stop the resolver bringing the link up */
1329 __set_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state);
1330
1331 /* Disable the carrier, to prevent transmit timeouts,
1332 * but one would hope all packets have been sent. This
1333 * also means phylink_resolve() will do nothing.
1334 */
1335 netif_carrier_off(pl->netdev);
1336
1337 /* We do not call mac_link_down() here as we want the
1338 * link to remain up to receive the WoL packets.
1339 */
1340 mutex_unlock(&pl->state_mutex);
1341 } else {
1342 phylink_stop(pl);
1343 }
1344}
1345EXPORT_SYMBOL_GPL(phylink_suspend);
1346
1347/**
1348 * phylink_resume() - handle a network device resume event
1349 * @pl: a pointer to a &struct phylink returned from phylink_create()
1350 *
1351 * Undo the effects of phylink_suspend(), returning the link to an
1352 * operational state.
1353 */
1354void phylink_resume(struct phylink *pl)
1355{
1356 ASSERT_RTNL();
1357
1358 if (test_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state)) {
1359 /* Wake-on-Lan enabled, MAC handling */
1360
1361 /* Call mac_link_down() so we keep the overall state balanced.
1362 * Do this under the state_mutex lock for consistency. This
1363 * will cause a "Link Down" message to be printed during
1364 * resume, which is harmless - the true link state will be
1365 * printed when we run a resolve.
1366 */
1367 mutex_lock(&pl->state_mutex);
1368 phylink_link_down(pl);
1369 mutex_unlock(&pl->state_mutex);
1370
1371 /* Re-apply the link parameters so that all the settings get
1372 * restored to the MAC.
1373 */
1374 phylink_mac_initial_config(pl, true);
1375
1376 /* Re-enable and re-resolve the link parameters */
1377 clear_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state);
1378 phylink_run_resolve(pl);
1379 } else {
1380 phylink_start(pl);
1381 }
1382}
1383EXPORT_SYMBOL_GPL(phylink_resume);
1384
1385/**
1386 * phylink_ethtool_get_wol() - get the wake on lan parameters for the PHY
1387 * @pl: a pointer to a &struct phylink returned from phylink_create()
1388 * @wol: a pointer to &struct ethtool_wolinfo to hold the read parameters
1389 *
1390 * Read the wake on lan parameters from the PHY attached to the phylink
1391 * instance specified by @pl. If no PHY is currently attached, report no
1392 * support for wake on lan.
1393 */
1394void phylink_ethtool_get_wol(struct phylink *pl, struct ethtool_wolinfo *wol)
1395{
1396 ASSERT_RTNL();
1397
1398 wol->supported = 0;
1399 wol->wolopts = 0;
1400
1401 if (pl->phydev)
1402 phy_ethtool_get_wol(pl->phydev, wol);
1403}
1404EXPORT_SYMBOL_GPL(phylink_ethtool_get_wol);
1405
1406/**
1407 * phylink_ethtool_set_wol() - set wake on lan parameters
1408 * @pl: a pointer to a &struct phylink returned from phylink_create()
1409 * @wol: a pointer to &struct ethtool_wolinfo for the desired parameters
1410 *
1411 * Set the wake on lan parameters for the PHY attached to the phylink
1412 * instance specified by @pl. If no PHY is attached, returns %EOPNOTSUPP
1413 * error.
1414 *
1415 * Returns zero on success or negative errno code.
1416 */
1417int phylink_ethtool_set_wol(struct phylink *pl, struct ethtool_wolinfo *wol)
1418{
1419 int ret = -EOPNOTSUPP;
1420
1421 ASSERT_RTNL();
1422
1423 if (pl->phydev)
1424 ret = phy_ethtool_set_wol(pl->phydev, wol);
1425
1426 return ret;
1427}
1428EXPORT_SYMBOL_GPL(phylink_ethtool_set_wol);
1429
1430static void phylink_merge_link_mode(unsigned long *dst, const unsigned long *b)
1431{
1432 __ETHTOOL_DECLARE_LINK_MODE_MASK(mask);
1433
1434 linkmode_zero(mask);
1435 phylink_set_port_modes(mask);
1436
1437 linkmode_and(dst, dst, mask);
1438 linkmode_or(dst, dst, b);
1439}
1440
1441static void phylink_get_ksettings(const struct phylink_link_state *state,
1442 struct ethtool_link_ksettings *kset)
1443{
1444 phylink_merge_link_mode(kset->link_modes.advertising, state->advertising);
1445 linkmode_copy(kset->link_modes.lp_advertising, state->lp_advertising);
1446 kset->base.speed = state->speed;
1447 kset->base.duplex = state->duplex;
1448 kset->base.autoneg = state->an_enabled ? AUTONEG_ENABLE :
1449 AUTONEG_DISABLE;
1450}
1451
1452/**
1453 * phylink_ethtool_ksettings_get() - get the current link settings
1454 * @pl: a pointer to a &struct phylink returned from phylink_create()
1455 * @kset: a pointer to a &struct ethtool_link_ksettings to hold link settings
1456 *
1457 * Read the current link settings for the phylink instance specified by @pl.
1458 * This will be the link settings read from the MAC, PHY or fixed link
1459 * settings depending on the current negotiation mode.
1460 */
1461int phylink_ethtool_ksettings_get(struct phylink *pl,
1462 struct ethtool_link_ksettings *kset)
1463{
1464 struct phylink_link_state link_state;
1465
1466 ASSERT_RTNL();
1467
1468 if (pl->phydev)
1469 phy_ethtool_ksettings_get(pl->phydev, kset);
1470 else
1471 kset->base.port = pl->link_port;
1472
1473 linkmode_copy(kset->link_modes.supported, pl->supported);
1474
1475 switch (pl->cur_link_an_mode) {
1476 case MLO_AN_FIXED:
1477 /* We are using fixed settings. Report these as the
1478 * current link settings - and note that these also
1479 * represent the supported speeds/duplex/pause modes.
1480 */
1481 phylink_get_fixed_state(pl, &link_state);
1482 phylink_get_ksettings(&link_state, kset);
1483 break;
1484
1485 case MLO_AN_INBAND:
1486 /* If there is a phy attached, then use the reported
1487 * settings from the phy with no modification.
1488 */
1489 if (pl->phydev)
1490 break;
1491
1492 phylink_mac_pcs_get_state(pl, &link_state);
1493
1494 /* The MAC is reporting the link results from its own PCS
1495 * layer via in-band status. Report these as the current
1496 * link settings.
1497 */
1498 phylink_get_ksettings(&link_state, kset);
1499 break;
1500 }
1501
1502 return 0;
1503}
1504EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_get);
1505
1506/**
1507 * phylink_ethtool_ksettings_set() - set the link settings
1508 * @pl: a pointer to a &struct phylink returned from phylink_create()
1509 * @kset: a pointer to a &struct ethtool_link_ksettings for the desired modes
1510 */
1511int phylink_ethtool_ksettings_set(struct phylink *pl,
1512 const struct ethtool_link_ksettings *kset)
1513{
1514 __ETHTOOL_DECLARE_LINK_MODE_MASK(support);
1515 struct phylink_link_state config;
1516 const struct phy_setting *s;
1517
1518 ASSERT_RTNL();
1519
1520 if (pl->phydev) {
1521 /* We can rely on phylib for this update; we also do not need
1522 * to update the pl->link_config settings:
1523 * - the configuration returned via ksettings_get() will come
1524 * from phylib whenever a PHY is present.
1525 * - link_config.interface will be updated by the PHY calling
1526 * back via phylink_phy_change() and a subsequent resolve.
1527 * - initial link configuration for PHY mode comes from the
1528 * last phy state updated via phylink_phy_change().
1529 * - other configuration changes (e.g. pause modes) are
1530 * performed directly via phylib.
1531 * - if in in-band mode with a PHY, the link configuration
1532 * is passed on the link from the PHY, and all of
1533 * link_config.{speed,duplex,an_enabled,pause} are not used.
1534 * - the only possible use would be link_config.advertising
1535 * pause modes when in 1000base-X mode with a PHY, but in
1536 * the presence of a PHY, this should not be changed as that
1537 * should be determined from the media side advertisement.
1538 */
1539 return phy_ethtool_ksettings_set(pl->phydev, kset);
1540 }
1541
1542 linkmode_copy(support, pl->supported);
1543 config = pl->link_config;
1544 config.an_enabled = kset->base.autoneg == AUTONEG_ENABLE;
1545
1546 /* Mask out unsupported advertisements, and force the autoneg bit */
1547 linkmode_and(config.advertising, kset->link_modes.advertising,
1548 support);
1549 linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising,
1550 config.an_enabled);
1551
1552 /* FIXME: should we reject autoneg if phy/mac does not support it? */
1553 switch (kset->base.autoneg) {
1554 case AUTONEG_DISABLE:
1555 /* Autonegotiation disabled, select a suitable speed and
1556 * duplex.
1557 */
1558 s = phy_lookup_setting(kset->base.speed, kset->base.duplex,
1559 support, false);
1560 if (!s)
1561 return -EINVAL;
1562
1563 /* If we have a fixed link, refuse to change link parameters.
1564 * If the link parameters match, accept them but do nothing.
1565 */
1566 if (pl->cur_link_an_mode == MLO_AN_FIXED) {
1567 if (s->speed != pl->link_config.speed ||
1568 s->duplex != pl->link_config.duplex)
1569 return -EINVAL;
1570 return 0;
1571 }
1572
1573 config.speed = s->speed;
1574 config.duplex = s->duplex;
1575 break;
1576
1577 case AUTONEG_ENABLE:
1578 /* If we have a fixed link, allow autonegotiation (since that
1579 * is our default case) but do not allow the advertisement to
1580 * be changed. If the advertisement matches, simply return.
1581 */
1582 if (pl->cur_link_an_mode == MLO_AN_FIXED) {
1583 if (!linkmode_equal(config.advertising,
1584 pl->link_config.advertising))
1585 return -EINVAL;
1586 return 0;
1587 }
1588
1589 config.speed = SPEED_UNKNOWN;
1590 config.duplex = DUPLEX_UNKNOWN;
1591 break;
1592
1593 default:
1594 return -EINVAL;
1595 }
1596
1597 /* We have ruled out the case with a PHY attached, and the
1598 * fixed-link cases. All that is left are in-band links.
1599 */
1600 if (phylink_validate(pl, support, &config))
1601 return -EINVAL;
1602
1603 /* If autonegotiation is enabled, we must have an advertisement */
1604 if (config.an_enabled && phylink_is_empty_linkmode(config.advertising))
1605 return -EINVAL;
1606
1607 /* If this link is with an SFP, ensure that changes to advertised modes
1608 * also cause the associated interface to be selected such that the
1609 * link can be configured correctly.
1610 */
1611 if (pl->sfp_port && pl->sfp_bus) {
1612 config.interface = sfp_select_interface(pl->sfp_bus,
1613 config.advertising);
1614 if (config.interface == PHY_INTERFACE_MODE_NA) {
1615 phylink_err(pl,
1616 "selection of interface failed, advertisement %*pb\n",
1617 __ETHTOOL_LINK_MODE_MASK_NBITS,
1618 config.advertising);
1619 return -EINVAL;
1620 }
1621
1622 /* Revalidate with the selected interface */
1623 linkmode_copy(support, pl->supported);
1624 if (phylink_validate(pl, support, &config)) {
1625 phylink_err(pl, "validation of %s/%s with support %*pb failed\n",
1626 phylink_an_mode_str(pl->cur_link_an_mode),
1627 phy_modes(config.interface),
1628 __ETHTOOL_LINK_MODE_MASK_NBITS, support);
1629 return -EINVAL;
1630 }
1631 }
1632
1633 mutex_lock(&pl->state_mutex);
1634 pl->link_config.speed = config.speed;
1635 pl->link_config.duplex = config.duplex;
1636 pl->link_config.an_enabled = config.an_enabled;
1637
1638 if (pl->link_config.interface != config.interface) {
1639 /* The interface changed, e.g. 1000base-X <-> 2500base-X */
1640 /* We need to force the link down, then change the interface */
1641 if (pl->old_link_state) {
1642 phylink_link_down(pl);
1643 pl->old_link_state = false;
1644 }
1645 if (!test_bit(PHYLINK_DISABLE_STOPPED,
1646 &pl->phylink_disable_state))
1647 phylink_major_config(pl, false, &config);
1648 pl->link_config.interface = config.interface;
1649 linkmode_copy(pl->link_config.advertising, config.advertising);
1650 } else if (!linkmode_equal(pl->link_config.advertising,
1651 config.advertising)) {
1652 linkmode_copy(pl->link_config.advertising, config.advertising);
1653 phylink_change_inband_advert(pl);
1654 }
1655 mutex_unlock(&pl->state_mutex);
1656
1657 return 0;
1658}
1659EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_set);
1660
1661/**
1662 * phylink_ethtool_nway_reset() - restart negotiation
1663 * @pl: a pointer to a &struct phylink returned from phylink_create()
1664 *
1665 * Restart negotiation for the phylink instance specified by @pl. This will
1666 * cause any attached phy to restart negotiation with the link partner, and
1667 * if the MAC is in a BaseX mode, the MAC will also be requested to restart
1668 * negotiation.
1669 *
1670 * Returns zero on success, or negative error code.
1671 */
1672int phylink_ethtool_nway_reset(struct phylink *pl)
1673{
1674 int ret = 0;
1675
1676 ASSERT_RTNL();
1677
1678 if (pl->phydev)
1679 ret = phy_restart_aneg(pl->phydev);
1680 phylink_mac_pcs_an_restart(pl);
1681
1682 return ret;
1683}
1684EXPORT_SYMBOL_GPL(phylink_ethtool_nway_reset);
1685
1686/**
1687 * phylink_ethtool_get_pauseparam() - get the current pause parameters
1688 * @pl: a pointer to a &struct phylink returned from phylink_create()
1689 * @pause: a pointer to a &struct ethtool_pauseparam
1690 */
1691void phylink_ethtool_get_pauseparam(struct phylink *pl,
1692 struct ethtool_pauseparam *pause)
1693{
1694 ASSERT_RTNL();
1695
1696 pause->autoneg = !!(pl->link_config.pause & MLO_PAUSE_AN);
1697 pause->rx_pause = !!(pl->link_config.pause & MLO_PAUSE_RX);
1698 pause->tx_pause = !!(pl->link_config.pause & MLO_PAUSE_TX);
1699}
1700EXPORT_SYMBOL_GPL(phylink_ethtool_get_pauseparam);
1701
1702/**
1703 * phylink_ethtool_set_pauseparam() - set the current pause parameters
1704 * @pl: a pointer to a &struct phylink returned from phylink_create()
1705 * @pause: a pointer to a &struct ethtool_pauseparam
1706 */
1707int phylink_ethtool_set_pauseparam(struct phylink *pl,
1708 struct ethtool_pauseparam *pause)
1709{
1710 struct phylink_link_state *config = &pl->link_config;
1711 bool manual_changed;
1712 int pause_state;
1713
1714 ASSERT_RTNL();
1715
1716 if (pl->cur_link_an_mode == MLO_AN_FIXED)
1717 return -EOPNOTSUPP;
1718
1719 if (!phylink_test(pl->supported, Pause) &&
1720 !phylink_test(pl->supported, Asym_Pause))
1721 return -EOPNOTSUPP;
1722
1723 if (!phylink_test(pl->supported, Asym_Pause) &&
1724 !pause->autoneg && pause->rx_pause != pause->tx_pause)
1725 return -EINVAL;
1726
1727 pause_state = 0;
1728 if (pause->autoneg)
1729 pause_state |= MLO_PAUSE_AN;
1730 if (pause->rx_pause)
1731 pause_state |= MLO_PAUSE_RX;
1732 if (pause->tx_pause)
1733 pause_state |= MLO_PAUSE_TX;
1734
1735 mutex_lock(&pl->state_mutex);
1736 /*
1737 * See the comments for linkmode_set_pause(), wrt the deficiencies
1738 * with the current implementation. A solution to this issue would
1739 * be:
1740 * ethtool Local device
1741 * rx tx Pause AsymDir
1742 * 0 0 0 0
1743 * 1 0 1 1
1744 * 0 1 0 1
1745 * 1 1 1 1
1746 * and then use the ethtool rx/tx enablement status to mask the
1747 * rx/tx pause resolution.
1748 */
1749 linkmode_set_pause(config->advertising, pause->tx_pause,
1750 pause->rx_pause);
1751
1752 manual_changed = (config->pause ^ pause_state) & MLO_PAUSE_AN ||
1753 (!(pause_state & MLO_PAUSE_AN) &&
1754 (config->pause ^ pause_state) & MLO_PAUSE_TXRX_MASK);
1755
1756 config->pause = pause_state;
1757
1758 /* Update our in-band advertisement, triggering a renegotiation if
1759 * the advertisement changed.
1760 */
1761 if (!pl->phydev)
1762 phylink_change_inband_advert(pl);
1763
1764 mutex_unlock(&pl->state_mutex);
1765
1766 /* If we have a PHY, a change of the pause frame advertisement will
1767 * cause phylib to renegotiate (if AN is enabled) which will in turn
1768 * call our phylink_phy_change() and trigger a resolve. Note that
1769 * we can't hold our state mutex while calling phy_set_asym_pause().
1770 */
1771 if (pl->phydev)
1772 phy_set_asym_pause(pl->phydev, pause->rx_pause,
1773 pause->tx_pause);
1774
1775 /* If the manual pause settings changed, make sure we trigger a
1776 * resolve to update their state; we can not guarantee that the
1777 * link will cycle.
1778 */
1779 if (manual_changed) {
1780 pl->mac_link_dropped = true;
1781 phylink_run_resolve(pl);
1782 }
1783
1784 return 0;
1785}
1786EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam);
1787
1788/**
1789 * phylink_get_eee_err() - read the energy efficient ethernet error
1790 * counter
1791 * @pl: a pointer to a &struct phylink returned from phylink_create().
1792 *
1793 * Read the Energy Efficient Ethernet error counter from the PHY associated
1794 * with the phylink instance specified by @pl.
1795 *
1796 * Returns positive error counter value, or negative error code.
1797 */
1798int phylink_get_eee_err(struct phylink *pl)
1799{
1800 int ret = 0;
1801
1802 ASSERT_RTNL();
1803
1804 if (pl->phydev)
1805 ret = phy_get_eee_err(pl->phydev);
1806
1807 return ret;
1808}
1809EXPORT_SYMBOL_GPL(phylink_get_eee_err);
1810
1811/**
1812 * phylink_init_eee() - init and check the EEE features
1813 * @pl: a pointer to a &struct phylink returned from phylink_create()
1814 * @clk_stop_enable: allow PHY to stop receive clock
1815 *
1816 * Must be called either with RTNL held or within mac_link_up()
1817 */
1818int phylink_init_eee(struct phylink *pl, bool clk_stop_enable)
1819{
1820 int ret = -EOPNOTSUPP;
1821
1822 if (pl->phydev)
1823 ret = phy_init_eee(pl->phydev, clk_stop_enable);
1824
1825 return ret;
1826}
1827EXPORT_SYMBOL_GPL(phylink_init_eee);
1828
1829/**
1830 * phylink_ethtool_get_eee() - read the energy efficient ethernet parameters
1831 * @pl: a pointer to a &struct phylink returned from phylink_create()
1832 * @eee: a pointer to a &struct ethtool_eee for the read parameters
1833 */
1834int phylink_ethtool_get_eee(struct phylink *pl, struct ethtool_eee *eee)
1835{
1836 int ret = -EOPNOTSUPP;
1837
1838 ASSERT_RTNL();
1839
1840 if (pl->phydev)
1841 ret = phy_ethtool_get_eee(pl->phydev, eee);
1842
1843 return ret;
1844}
1845EXPORT_SYMBOL_GPL(phylink_ethtool_get_eee);
1846
1847/**
1848 * phylink_ethtool_set_eee() - set the energy efficient ethernet parameters
1849 * @pl: a pointer to a &struct phylink returned from phylink_create()
1850 * @eee: a pointer to a &struct ethtool_eee for the desired parameters
1851 */
1852int phylink_ethtool_set_eee(struct phylink *pl, struct ethtool_eee *eee)
1853{
1854 int ret = -EOPNOTSUPP;
1855
1856 ASSERT_RTNL();
1857
1858 if (pl->phydev)
1859 ret = phy_ethtool_set_eee(pl->phydev, eee);
1860
1861 return ret;
1862}
1863EXPORT_SYMBOL_GPL(phylink_ethtool_set_eee);
1864
1865/* This emulates MII registers for a fixed-mode phy operating as per the
1866 * passed in state. "aneg" defines if we report negotiation is possible.
1867 *
1868 * FIXME: should deal with negotiation state too.
1869 */
1870static int phylink_mii_emul_read(unsigned int reg,
1871 struct phylink_link_state *state)
1872{
1873 struct fixed_phy_status fs;
1874 unsigned long *lpa = state->lp_advertising;
1875 int val;
1876
1877 fs.link = state->link;
1878 fs.speed = state->speed;
1879 fs.duplex = state->duplex;
1880 fs.pause = test_bit(ETHTOOL_LINK_MODE_Pause_BIT, lpa);
1881 fs.asym_pause = test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, lpa);
1882
1883 val = swphy_read_reg(reg, &fs);
1884 if (reg == MII_BMSR) {
1885 if (!state->an_complete)
1886 val &= ~BMSR_ANEGCOMPLETE;
1887 }
1888 return val;
1889}
1890
1891static int phylink_phy_read(struct phylink *pl, unsigned int phy_id,
1892 unsigned int reg)
1893{
1894 struct phy_device *phydev = pl->phydev;
1895 int prtad, devad;
1896
1897 if (mdio_phy_id_is_c45(phy_id)) {
1898 prtad = mdio_phy_id_prtad(phy_id);
1899 devad = mdio_phy_id_devad(phy_id);
1900 devad = mdiobus_c45_addr(devad, reg);
1901 } else if (phydev->is_c45) {
1902 switch (reg) {
1903 case MII_BMCR:
1904 case MII_BMSR:
1905 case MII_PHYSID1:
1906 case MII_PHYSID2:
1907 devad = __ffs(phydev->c45_ids.mmds_present);
1908 break;
1909 case MII_ADVERTISE:
1910 case MII_LPA:
1911 if (!(phydev->c45_ids.mmds_present & MDIO_DEVS_AN))
1912 return -EINVAL;
1913 devad = MDIO_MMD_AN;
1914 if (reg == MII_ADVERTISE)
1915 reg = MDIO_AN_ADVERTISE;
1916 else
1917 reg = MDIO_AN_LPA;
1918 break;
1919 default:
1920 return -EINVAL;
1921 }
1922 prtad = phy_id;
1923 devad = mdiobus_c45_addr(devad, reg);
1924 } else {
1925 prtad = phy_id;
1926 devad = reg;
1927 }
1928 return mdiobus_read(pl->phydev->mdio.bus, prtad, devad);
1929}
1930
1931static int phylink_phy_write(struct phylink *pl, unsigned int phy_id,
1932 unsigned int reg, unsigned int val)
1933{
1934 struct phy_device *phydev = pl->phydev;
1935 int prtad, devad;
1936
1937 if (mdio_phy_id_is_c45(phy_id)) {
1938 prtad = mdio_phy_id_prtad(phy_id);
1939 devad = mdio_phy_id_devad(phy_id);
1940 devad = mdiobus_c45_addr(devad, reg);
1941 } else if (phydev->is_c45) {
1942 switch (reg) {
1943 case MII_BMCR:
1944 case MII_BMSR:
1945 case MII_PHYSID1:
1946 case MII_PHYSID2:
1947 devad = __ffs(phydev->c45_ids.mmds_present);
1948 break;
1949 case MII_ADVERTISE:
1950 case MII_LPA:
1951 if (!(phydev->c45_ids.mmds_present & MDIO_DEVS_AN))
1952 return -EINVAL;
1953 devad = MDIO_MMD_AN;
1954 if (reg == MII_ADVERTISE)
1955 reg = MDIO_AN_ADVERTISE;
1956 else
1957 reg = MDIO_AN_LPA;
1958 break;
1959 default:
1960 return -EINVAL;
1961 }
1962 prtad = phy_id;
1963 devad = mdiobus_c45_addr(devad, reg);
1964 } else {
1965 prtad = phy_id;
1966 devad = reg;
1967 }
1968
1969 return mdiobus_write(phydev->mdio.bus, prtad, devad, val);
1970}
1971
1972static int phylink_mii_read(struct phylink *pl, unsigned int phy_id,
1973 unsigned int reg)
1974{
1975 struct phylink_link_state state;
1976 int val = 0xffff;
1977
1978 switch (pl->cur_link_an_mode) {
1979 case MLO_AN_FIXED:
1980 if (phy_id == 0) {
1981 phylink_get_fixed_state(pl, &state);
1982 val = phylink_mii_emul_read(reg, &state);
1983 }
1984 break;
1985
1986 case MLO_AN_PHY:
1987 return -EOPNOTSUPP;
1988
1989 case MLO_AN_INBAND:
1990 if (phy_id == 0) {
1991 phylink_mac_pcs_get_state(pl, &state);
1992 val = phylink_mii_emul_read(reg, &state);
1993 }
1994 break;
1995 }
1996
1997 return val & 0xffff;
1998}
1999
2000static int phylink_mii_write(struct phylink *pl, unsigned int phy_id,
2001 unsigned int reg, unsigned int val)
2002{
2003 switch (pl->cur_link_an_mode) {
2004 case MLO_AN_FIXED:
2005 break;
2006
2007 case MLO_AN_PHY:
2008 return -EOPNOTSUPP;
2009
2010 case MLO_AN_INBAND:
2011 break;
2012 }
2013
2014 return 0;
2015}
2016
2017/**
2018 * phylink_mii_ioctl() - generic mii ioctl interface
2019 * @pl: a pointer to a &struct phylink returned from phylink_create()
2020 * @ifr: a pointer to a &struct ifreq for socket ioctls
2021 * @cmd: ioctl cmd to execute
2022 *
2023 * Perform the specified MII ioctl on the PHY attached to the phylink instance
2024 * specified by @pl. If no PHY is attached, emulate the presence of the PHY.
2025 *
2026 * Returns: zero on success or negative error code.
2027 *
2028 * %SIOCGMIIPHY:
2029 * read register from the current PHY.
2030 * %SIOCGMIIREG:
2031 * read register from the specified PHY.
2032 * %SIOCSMIIREG:
2033 * set a register on the specified PHY.
2034 */
2035int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd)
2036{
2037 struct mii_ioctl_data *mii = if_mii(ifr);
2038 int ret;
2039
2040 ASSERT_RTNL();
2041
2042 if (pl->phydev) {
2043 /* PHYs only exist for MLO_AN_PHY and SGMII */
2044 switch (cmd) {
2045 case SIOCGMIIPHY:
2046 mii->phy_id = pl->phydev->mdio.addr;
2047 fallthrough;
2048
2049 case SIOCGMIIREG:
2050 ret = phylink_phy_read(pl, mii->phy_id, mii->reg_num);
2051 if (ret >= 0) {
2052 mii->val_out = ret;
2053 ret = 0;
2054 }
2055 break;
2056
2057 case SIOCSMIIREG:
2058 ret = phylink_phy_write(pl, mii->phy_id, mii->reg_num,
2059 mii->val_in);
2060 break;
2061
2062 default:
2063 ret = phy_mii_ioctl(pl->phydev, ifr, cmd);
2064 break;
2065 }
2066 } else {
2067 switch (cmd) {
2068 case SIOCGMIIPHY:
2069 mii->phy_id = 0;
2070 fallthrough;
2071
2072 case SIOCGMIIREG:
2073 ret = phylink_mii_read(pl, mii->phy_id, mii->reg_num);
2074 if (ret >= 0) {
2075 mii->val_out = ret;
2076 ret = 0;
2077 }
2078 break;
2079
2080 case SIOCSMIIREG:
2081 ret = phylink_mii_write(pl, mii->phy_id, mii->reg_num,
2082 mii->val_in);
2083 break;
2084
2085 default:
2086 ret = -EOPNOTSUPP;
2087 break;
2088 }
2089 }
2090
2091 return ret;
2092}
2093EXPORT_SYMBOL_GPL(phylink_mii_ioctl);
2094
2095/**
2096 * phylink_speed_down() - set the non-SFP PHY to lowest speed supported by both
2097 * link partners
2098 * @pl: a pointer to a &struct phylink returned from phylink_create()
2099 * @sync: perform action synchronously
2100 *
2101 * If we have a PHY that is not part of a SFP module, then set the speed
2102 * as described in the phy_speed_down() function. Please see this function
2103 * for a description of the @sync parameter.
2104 *
2105 * Returns zero if there is no PHY, otherwise as per phy_speed_down().
2106 */
2107int phylink_speed_down(struct phylink *pl, bool sync)
2108{
2109 int ret = 0;
2110
2111 ASSERT_RTNL();
2112
2113 if (!pl->sfp_bus && pl->phydev)
2114 ret = phy_speed_down(pl->phydev, sync);
2115
2116 return ret;
2117}
2118EXPORT_SYMBOL_GPL(phylink_speed_down);
2119
2120/**
2121 * phylink_speed_up() - restore the advertised speeds prior to the call to
2122 * phylink_speed_down()
2123 * @pl: a pointer to a &struct phylink returned from phylink_create()
2124 *
2125 * If we have a PHY that is not part of a SFP module, then restore the
2126 * PHY speeds as per phy_speed_up().
2127 *
2128 * Returns zero if there is no PHY, otherwise as per phy_speed_up().
2129 */
2130int phylink_speed_up(struct phylink *pl)
2131{
2132 int ret = 0;
2133
2134 ASSERT_RTNL();
2135
2136 if (!pl->sfp_bus && pl->phydev)
2137 ret = phy_speed_up(pl->phydev);
2138
2139 return ret;
2140}
2141EXPORT_SYMBOL_GPL(phylink_speed_up);
2142
2143static void phylink_sfp_attach(void *upstream, struct sfp_bus *bus)
2144{
2145 struct phylink *pl = upstream;
2146
2147 pl->netdev->sfp_bus = bus;
2148}
2149
2150static void phylink_sfp_detach(void *upstream, struct sfp_bus *bus)
2151{
2152 struct phylink *pl = upstream;
2153
2154 pl->netdev->sfp_bus = NULL;
2155}
2156
2157static int phylink_sfp_config(struct phylink *pl, u8 mode,
2158 const unsigned long *supported,
2159 const unsigned long *advertising)
2160{
2161 __ETHTOOL_DECLARE_LINK_MODE_MASK(support1);
2162 __ETHTOOL_DECLARE_LINK_MODE_MASK(support);
2163 struct phylink_link_state config;
2164 phy_interface_t iface;
2165 bool changed;
2166 int ret;
2167
2168 linkmode_copy(support, supported);
2169
2170 memset(&config, 0, sizeof(config));
2171 linkmode_copy(config.advertising, advertising);
2172 config.interface = PHY_INTERFACE_MODE_NA;
2173 config.speed = SPEED_UNKNOWN;
2174 config.duplex = DUPLEX_UNKNOWN;
2175 config.pause = MLO_PAUSE_AN;
2176 config.an_enabled = pl->link_config.an_enabled;
2177
2178 /* Ignore errors if we're expecting a PHY to attach later */
2179 ret = phylink_validate(pl, support, &config);
2180 if (ret) {
2181 phylink_err(pl, "validation with support %*pb failed: %d\n",
2182 __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
2183 return ret;
2184 }
2185
2186 iface = sfp_select_interface(pl->sfp_bus, config.advertising);
2187 if (iface == PHY_INTERFACE_MODE_NA) {
2188 phylink_err(pl,
2189 "selection of interface failed, advertisement %*pb\n",
2190 __ETHTOOL_LINK_MODE_MASK_NBITS, config.advertising);
2191 return -EINVAL;
2192 }
2193
2194 config.interface = iface;
2195 linkmode_copy(support1, support);
2196 ret = phylink_validate(pl, support1, &config);
2197 if (ret) {
2198 phylink_err(pl, "validation of %s/%s with support %*pb failed: %d\n",
2199 phylink_an_mode_str(mode),
2200 phy_modes(config.interface),
2201 __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
2202 return ret;
2203 }
2204
2205 phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n",
2206 phylink_an_mode_str(mode), phy_modes(config.interface),
2207 __ETHTOOL_LINK_MODE_MASK_NBITS, support);
2208
2209 if (phy_interface_mode_is_8023z(iface) && pl->phydev)
2210 return -EINVAL;
2211
2212 changed = !linkmode_equal(pl->supported, support) ||
2213 !linkmode_equal(pl->link_config.advertising,
2214 config.advertising);
2215 if (changed) {
2216 linkmode_copy(pl->supported, support);
2217 linkmode_copy(pl->link_config.advertising, config.advertising);
2218 }
2219
2220 if (pl->cur_link_an_mode != mode ||
2221 pl->link_config.interface != config.interface) {
2222 pl->link_config.interface = config.interface;
2223 pl->cur_link_an_mode = mode;
2224
2225 changed = true;
2226
2227 phylink_info(pl, "switched to %s/%s link mode\n",
2228 phylink_an_mode_str(mode),
2229 phy_modes(config.interface));
2230 }
2231
2232 pl->link_port = pl->sfp_port;
2233
2234 if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
2235 &pl->phylink_disable_state))
2236 phylink_mac_initial_config(pl, false);
2237
2238 return ret;
2239}
2240
2241static int phylink_sfp_module_insert(void *upstream,
2242 const struct sfp_eeprom_id *id)
2243{
2244 struct phylink *pl = upstream;
2245 unsigned long *support = pl->sfp_support;
2246
2247 ASSERT_RTNL();
2248
2249 linkmode_zero(support);
2250 sfp_parse_support(pl->sfp_bus, id, support);
2251 pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, support);
2252
2253 /* If this module may have a PHY connecting later, defer until later */
2254 pl->sfp_may_have_phy = sfp_may_have_phy(pl->sfp_bus, id);
2255 if (pl->sfp_may_have_phy)
2256 return 0;
2257
2258 return phylink_sfp_config(pl, MLO_AN_INBAND, support, support);
2259}
2260
2261static int phylink_sfp_module_start(void *upstream)
2262{
2263 struct phylink *pl = upstream;
2264
2265 /* If this SFP module has a PHY, start the PHY now. */
2266 if (pl->phydev) {
2267 phy_start(pl->phydev);
2268 return 0;
2269 }
2270
2271 /* If the module may have a PHY but we didn't detect one we
2272 * need to configure the MAC here.
2273 */
2274 if (!pl->sfp_may_have_phy)
2275 return 0;
2276
2277 return phylink_sfp_config(pl, MLO_AN_INBAND,
2278 pl->sfp_support, pl->sfp_support);
2279}
2280
2281static void phylink_sfp_module_stop(void *upstream)
2282{
2283 struct phylink *pl = upstream;
2284
2285 /* If this SFP module has a PHY, stop it. */
2286 if (pl->phydev)
2287 phy_stop(pl->phydev);
2288}
2289
2290static void phylink_sfp_link_down(void *upstream)
2291{
2292 struct phylink *pl = upstream;
2293
2294 ASSERT_RTNL();
2295
2296 phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_LINK);
2297}
2298
2299static void phylink_sfp_link_up(void *upstream)
2300{
2301 struct phylink *pl = upstream;
2302
2303 ASSERT_RTNL();
2304
2305 clear_bit(PHYLINK_DISABLE_LINK, &pl->phylink_disable_state);
2306 phylink_run_resolve(pl);
2307}
2308
2309/* The Broadcom BCM84881 in the Methode DM7052 is unable to provide a SGMII
2310 * or 802.3z control word, so inband will not work.
2311 */
2312static bool phylink_phy_no_inband(struct phy_device *phy)
2313{
2314 return phy->is_c45 &&
2315 (phy->c45_ids.device_ids[1] & 0xfffffff0) == 0xae025150;
2316}
2317
2318static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
2319{
2320 struct phylink *pl = upstream;
2321 phy_interface_t interface;
2322 u8 mode;
2323 int ret;
2324
2325 /*
2326 * This is the new way of dealing with flow control for PHYs,
2327 * as described by Timur Tabi in commit 529ed1275263 ("net: phy:
2328 * phy drivers should not set SUPPORTED_[Asym_]Pause") except
2329 * using our validate call to the MAC, we rely upon the MAC
2330 * clearing the bits from both supported and advertising fields.
2331 */
2332 phy_support_asym_pause(phy);
2333
2334 if (phylink_phy_no_inband(phy))
2335 mode = MLO_AN_PHY;
2336 else
2337 mode = MLO_AN_INBAND;
2338
2339 /* Do the initial configuration */
2340 ret = phylink_sfp_config(pl, mode, phy->supported, phy->advertising);
2341 if (ret < 0)
2342 return ret;
2343
2344 interface = pl->link_config.interface;
2345 ret = phylink_attach_phy(pl, phy, interface);
2346 if (ret < 0)
2347 return ret;
2348
2349 ret = phylink_bringup_phy(pl, phy, interface);
2350 if (ret)
2351 phy_detach(phy);
2352
2353 return ret;
2354}
2355
2356static void phylink_sfp_disconnect_phy(void *upstream)
2357{
2358 phylink_disconnect_phy(upstream);
2359}
2360
2361static const struct sfp_upstream_ops sfp_phylink_ops = {
2362 .attach = phylink_sfp_attach,
2363 .detach = phylink_sfp_detach,
2364 .module_insert = phylink_sfp_module_insert,
2365 .module_start = phylink_sfp_module_start,
2366 .module_stop = phylink_sfp_module_stop,
2367 .link_up = phylink_sfp_link_up,
2368 .link_down = phylink_sfp_link_down,
2369 .connect_phy = phylink_sfp_connect_phy,
2370 .disconnect_phy = phylink_sfp_disconnect_phy,
2371};
2372
2373/* Helpers for MAC drivers */
2374
2375/**
2376 * phylink_helper_basex_speed() - 1000BaseX/2500BaseX helper
2377 * @state: a pointer to a &struct phylink_link_state
2378 *
2379 * Inspect the interface mode, advertising mask or forced speed and
2380 * decide whether to run at 2.5Gbit or 1Gbit appropriately, switching
2381 * the interface mode to suit. @state->interface is appropriately
2382 * updated, and the advertising mask has the "other" baseX_Full flag
2383 * cleared.
2384 */
2385void phylink_helper_basex_speed(struct phylink_link_state *state)
2386{
2387 if (phy_interface_mode_is_8023z(state->interface)) {
2388 bool want_2500 = state->an_enabled ?
2389 phylink_test(state->advertising, 2500baseX_Full) :
2390 state->speed == SPEED_2500;
2391
2392 if (want_2500) {
2393 phylink_clear(state->advertising, 1000baseX_Full);
2394 state->interface = PHY_INTERFACE_MODE_2500BASEX;
2395 } else {
2396 phylink_clear(state->advertising, 2500baseX_Full);
2397 state->interface = PHY_INTERFACE_MODE_1000BASEX;
2398 }
2399 }
2400}
2401EXPORT_SYMBOL_GPL(phylink_helper_basex_speed);
2402
2403static void phylink_decode_c37_word(struct phylink_link_state *state,
2404 uint16_t config_reg, int speed)
2405{
2406 bool tx_pause, rx_pause;
2407 int fd_bit;
2408
2409 if (speed == SPEED_2500)
2410 fd_bit = ETHTOOL_LINK_MODE_2500baseX_Full_BIT;
2411 else
2412 fd_bit = ETHTOOL_LINK_MODE_1000baseX_Full_BIT;
2413
2414 mii_lpa_mod_linkmode_x(state->lp_advertising, config_reg, fd_bit);
2415
2416 if (linkmode_test_bit(fd_bit, state->advertising) &&
2417 linkmode_test_bit(fd_bit, state->lp_advertising)) {
2418 state->speed = speed;
2419 state->duplex = DUPLEX_FULL;
2420 } else {
2421 /* negotiation failure */
2422 state->link = false;
2423 }
2424
2425 linkmode_resolve_pause(state->advertising, state->lp_advertising,
2426 &tx_pause, &rx_pause);
2427
2428 if (tx_pause)
2429 state->pause |= MLO_PAUSE_TX;
2430 if (rx_pause)
2431 state->pause |= MLO_PAUSE_RX;
2432}
2433
2434static void phylink_decode_sgmii_word(struct phylink_link_state *state,
2435 uint16_t config_reg)
2436{
2437 if (!(config_reg & LPA_SGMII_LINK)) {
2438 state->link = false;
2439 return;
2440 }
2441
2442 switch (config_reg & LPA_SGMII_SPD_MASK) {
2443 case LPA_SGMII_10:
2444 state->speed = SPEED_10;
2445 break;
2446 case LPA_SGMII_100:
2447 state->speed = SPEED_100;
2448 break;
2449 case LPA_SGMII_1000:
2450 state->speed = SPEED_1000;
2451 break;
2452 default:
2453 state->link = false;
2454 return;
2455 }
2456 if (config_reg & LPA_SGMII_FULL_DUPLEX)
2457 state->duplex = DUPLEX_FULL;
2458 else
2459 state->duplex = DUPLEX_HALF;
2460}
2461
2462/**
2463 * phylink_decode_usxgmii_word() - decode the USXGMII word from a MAC PCS
2464 * @state: a pointer to a struct phylink_link_state.
2465 * @lpa: a 16 bit value which stores the USXGMII auto-negotiation word
2466 *
2467 * Helper for MAC PCS supporting the USXGMII protocol and the auto-negotiation
2468 * code word. Decode the USXGMII code word and populate the corresponding fields
2469 * (speed, duplex) into the phylink_link_state structure.
2470 */
2471void phylink_decode_usxgmii_word(struct phylink_link_state *state,
2472 uint16_t lpa)
2473{
2474 switch (lpa & MDIO_USXGMII_SPD_MASK) {
2475 case MDIO_USXGMII_10:
2476 state->speed = SPEED_10;
2477 break;
2478 case MDIO_USXGMII_100:
2479 state->speed = SPEED_100;
2480 break;
2481 case MDIO_USXGMII_1000:
2482 state->speed = SPEED_1000;
2483 break;
2484 case MDIO_USXGMII_2500:
2485 state->speed = SPEED_2500;
2486 break;
2487 case MDIO_USXGMII_5000:
2488 state->speed = SPEED_5000;
2489 break;
2490 case MDIO_USXGMII_10G:
2491 state->speed = SPEED_10000;
2492 break;
2493 default:
2494 state->link = false;
2495 return;
2496 }
2497
2498 if (lpa & MDIO_USXGMII_FULL_DUPLEX)
2499 state->duplex = DUPLEX_FULL;
2500 else
2501 state->duplex = DUPLEX_HALF;
2502}
2503EXPORT_SYMBOL_GPL(phylink_decode_usxgmii_word);
2504
2505/**
2506 * phylink_mii_c22_pcs_get_state() - read the MAC PCS state
2507 * @pcs: a pointer to a &struct mdio_device.
2508 * @state: a pointer to a &struct phylink_link_state.
2509 *
2510 * Helper for MAC PCS supporting the 802.3 clause 22 register set for
2511 * clause 37 negotiation and/or SGMII control.
2512 *
2513 * Read the MAC PCS state from the MII device configured in @config and
2514 * parse the Clause 37 or Cisco SGMII link partner negotiation word into
2515 * the phylink @state structure. This is suitable to be directly plugged
2516 * into the mac_pcs_get_state() member of the struct phylink_mac_ops
2517 * structure.
2518 */
2519void phylink_mii_c22_pcs_get_state(struct mdio_device *pcs,
2520 struct phylink_link_state *state)
2521{
2522 struct mii_bus *bus = pcs->bus;
2523 int addr = pcs->addr;
2524 int bmsr, lpa;
2525
2526 bmsr = mdiobus_read(bus, addr, MII_BMSR);
2527 lpa = mdiobus_read(bus, addr, MII_LPA);
2528 if (bmsr < 0 || lpa < 0) {
2529 state->link = false;
2530 return;
2531 }
2532
2533 state->link = !!(bmsr & BMSR_LSTATUS);
2534 state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
2535 if (!state->link)
2536 return;
2537
2538 switch (state->interface) {
2539 case PHY_INTERFACE_MODE_1000BASEX:
2540 phylink_decode_c37_word(state, lpa, SPEED_1000);
2541 break;
2542
2543 case PHY_INTERFACE_MODE_2500BASEX:
2544 phylink_decode_c37_word(state, lpa, SPEED_2500);
2545 break;
2546
2547 case PHY_INTERFACE_MODE_SGMII:
2548 case PHY_INTERFACE_MODE_QSGMII:
2549 phylink_decode_sgmii_word(state, lpa);
2550 break;
2551
2552 default:
2553 state->link = false;
2554 break;
2555 }
2556}
2557EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_get_state);
2558
2559/**
2560 * phylink_mii_c22_pcs_set_advertisement() - configure the clause 37 PCS
2561 * advertisement
2562 * @pcs: a pointer to a &struct mdio_device.
2563 * @interface: the PHY interface mode being configured
2564 * @advertising: the ethtool advertisement mask
2565 *
2566 * Helper for MAC PCS supporting the 802.3 clause 22 register set for
2567 * clause 37 negotiation and/or SGMII control.
2568 *
2569 * Configure the clause 37 PCS advertisement as specified by @state. This
2570 * does not trigger a renegotiation; phylink will do that via the
2571 * mac_an_restart() method of the struct phylink_mac_ops structure.
2572 *
2573 * Returns negative error code on failure to configure the advertisement,
2574 * zero if no change has been made, or one if the advertisement has changed.
2575 */
2576int phylink_mii_c22_pcs_set_advertisement(struct mdio_device *pcs,
2577 phy_interface_t interface,
2578 const unsigned long *advertising)
2579{
2580 struct mii_bus *bus = pcs->bus;
2581 int addr = pcs->addr;
2582 int val, ret;
2583 u16 adv;
2584
2585 switch (interface) {
2586 case PHY_INTERFACE_MODE_1000BASEX:
2587 case PHY_INTERFACE_MODE_2500BASEX:
2588 adv = ADVERTISE_1000XFULL;
2589 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT,
2590 advertising))
2591 adv |= ADVERTISE_1000XPAUSE;
2592 if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
2593 advertising))
2594 adv |= ADVERTISE_1000XPSE_ASYM;
2595
2596 val = mdiobus_read(bus, addr, MII_ADVERTISE);
2597 if (val < 0)
2598 return val;
2599
2600 if (val == adv)
2601 return 0;
2602
2603 ret = mdiobus_write(bus, addr, MII_ADVERTISE, adv);
2604 if (ret < 0)
2605 return ret;
2606
2607 return 1;
2608
2609 case PHY_INTERFACE_MODE_SGMII:
2610 val = mdiobus_read(bus, addr, MII_ADVERTISE);
2611 if (val < 0)
2612 return val;
2613
2614 if (val == 0x0001)
2615 return 0;
2616
2617 ret = mdiobus_write(bus, addr, MII_ADVERTISE, 0x0001);
2618 if (ret < 0)
2619 return ret;
2620
2621 return 1;
2622
2623 default:
2624 /* Nothing to do for other modes */
2625 return 0;
2626 }
2627}
2628EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_set_advertisement);
2629
2630/**
2631 * phylink_mii_c22_pcs_config() - configure clause 22 PCS
2632 * @pcs: a pointer to a &struct mdio_device.
2633 * @mode: link autonegotiation mode
2634 * @interface: the PHY interface mode being configured
2635 * @advertising: the ethtool advertisement mask
2636 *
2637 * Configure a Clause 22 PCS PHY with the appropriate negotiation
2638 * parameters for the @mode, @interface and @advertising parameters.
2639 * Returns negative error number on failure, zero if the advertisement
2640 * has not changed, or positive if there is a change.
2641 */
2642int phylink_mii_c22_pcs_config(struct mdio_device *pcs, unsigned int mode,
2643 phy_interface_t interface,
2644 const unsigned long *advertising)
2645{
2646 bool changed;
2647 u16 bmcr;
2648 int ret;
2649
2650 ret = phylink_mii_c22_pcs_set_advertisement(pcs, interface,
2651 advertising);
2652 if (ret < 0)
2653 return ret;
2654
2655 changed = ret > 0;
2656
2657 /* Ensure ISOLATE bit is disabled */
2658 bmcr = mode == MLO_AN_INBAND ? BMCR_ANENABLE : 0;
2659 ret = mdiobus_modify(pcs->bus, pcs->addr, MII_BMCR,
2660 BMCR_ANENABLE | BMCR_ISOLATE, bmcr);
2661 if (ret < 0)
2662 return ret;
2663
2664 return changed ? 1 : 0;
2665}
2666EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_config);
2667
2668/**
2669 * phylink_mii_c22_pcs_an_restart() - restart 802.3z autonegotiation
2670 * @pcs: a pointer to a &struct mdio_device.
2671 *
2672 * Helper for MAC PCS supporting the 802.3 clause 22 register set for
2673 * clause 37 negotiation.
2674 *
2675 * Restart the clause 37 negotiation with the link partner. This is
2676 * suitable to be directly plugged into the mac_pcs_get_state() member
2677 * of the struct phylink_mac_ops structure.
2678 */
2679void phylink_mii_c22_pcs_an_restart(struct mdio_device *pcs)
2680{
2681 struct mii_bus *bus = pcs->bus;
2682 int val, addr = pcs->addr;
2683
2684 val = mdiobus_read(bus, addr, MII_BMCR);
2685 if (val >= 0) {
2686 val |= BMCR_ANRESTART;
2687
2688 mdiobus_write(bus, addr, MII_BMCR, val);
2689 }
2690}
2691EXPORT_SYMBOL_GPL(phylink_mii_c22_pcs_an_restart);
2692
2693void phylink_mii_c45_pcs_get_state(struct mdio_device *pcs,
2694 struct phylink_link_state *state)
2695{
2696 struct mii_bus *bus = pcs->bus;
2697 int addr = pcs->addr;
2698 int stat;
2699
2700 stat = mdiobus_c45_read(bus, addr, MDIO_MMD_PCS, MDIO_STAT1);
2701 if (stat < 0) {
2702 state->link = false;
2703 return;
2704 }
2705
2706 state->link = !!(stat & MDIO_STAT1_LSTATUS);
2707 if (!state->link)
2708 return;
2709
2710 switch (state->interface) {
2711 case PHY_INTERFACE_MODE_10GBASER:
2712 state->speed = SPEED_10000;
2713 state->duplex = DUPLEX_FULL;
2714 break;
2715
2716 default:
2717 break;
2718 }
2719}
2720EXPORT_SYMBOL_GPL(phylink_mii_c45_pcs_get_state);
2721
2722MODULE_LICENSE("GPL v2");