Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
4 * Copyright (C) 2005-2006 Thomas Gleixner
5 *
6 * This file contains driver APIs to the irq subsystem.
7 */
8
9#define pr_fmt(fmt) "genirq: " fmt
10
11#include <linux/irq.h>
12#include <linux/kthread.h>
13#include <linux/module.h>
14#include <linux/random.h>
15#include <linux/interrupt.h>
16#include <linux/irqdomain.h>
17#include <linux/slab.h>
18#include <linux/sched.h>
19#include <linux/sched/rt.h>
20#include <linux/sched/task.h>
21#include <linux/sched/isolation.h>
22#include <uapi/linux/sched/types.h>
23#include <linux/task_work.h>
24
25#include "internals.h"
26
27#if defined(CONFIG_IRQ_FORCED_THREADING) && !defined(CONFIG_PREEMPT_RT)
28DEFINE_STATIC_KEY_FALSE(force_irqthreads_key);
29
30static int __init setup_forced_irqthreads(char *arg)
31{
32 static_branch_enable(&force_irqthreads_key);
33 return 0;
34}
35early_param("threadirqs", setup_forced_irqthreads);
36#endif
37
38static void __synchronize_hardirq(struct irq_desc *desc, bool sync_chip)
39{
40 struct irq_data *irqd = irq_desc_get_irq_data(desc);
41 bool inprogress;
42
43 do {
44 unsigned long flags;
45
46 /*
47 * Wait until we're out of the critical section. This might
48 * give the wrong answer due to the lack of memory barriers.
49 */
50 while (irqd_irq_inprogress(&desc->irq_data))
51 cpu_relax();
52
53 /* Ok, that indicated we're done: double-check carefully. */
54 raw_spin_lock_irqsave(&desc->lock, flags);
55 inprogress = irqd_irq_inprogress(&desc->irq_data);
56
57 /*
58 * If requested and supported, check at the chip whether it
59 * is in flight at the hardware level, i.e. already pending
60 * in a CPU and waiting for service and acknowledge.
61 */
62 if (!inprogress && sync_chip) {
63 /*
64 * Ignore the return code. inprogress is only updated
65 * when the chip supports it.
66 */
67 __irq_get_irqchip_state(irqd, IRQCHIP_STATE_ACTIVE,
68 &inprogress);
69 }
70 raw_spin_unlock_irqrestore(&desc->lock, flags);
71
72 /* Oops, that failed? */
73 } while (inprogress);
74}
75
76/**
77 * synchronize_hardirq - wait for pending hard IRQ handlers (on other CPUs)
78 * @irq: interrupt number to wait for
79 *
80 * This function waits for any pending hard IRQ handlers for this
81 * interrupt to complete before returning. If you use this
82 * function while holding a resource the IRQ handler may need you
83 * will deadlock. It does not take associated threaded handlers
84 * into account.
85 *
86 * Do not use this for shutdown scenarios where you must be sure
87 * that all parts (hardirq and threaded handler) have completed.
88 *
89 * Returns: false if a threaded handler is active.
90 *
91 * This function may be called - with care - from IRQ context.
92 *
93 * It does not check whether there is an interrupt in flight at the
94 * hardware level, but not serviced yet, as this might deadlock when
95 * called with interrupts disabled and the target CPU of the interrupt
96 * is the current CPU.
97 */
98bool synchronize_hardirq(unsigned int irq)
99{
100 struct irq_desc *desc = irq_to_desc(irq);
101
102 if (desc) {
103 __synchronize_hardirq(desc, false);
104 return !atomic_read(&desc->threads_active);
105 }
106
107 return true;
108}
109EXPORT_SYMBOL(synchronize_hardirq);
110
111static void __synchronize_irq(struct irq_desc *desc)
112{
113 __synchronize_hardirq(desc, true);
114 /*
115 * We made sure that no hardirq handler is running. Now verify that no
116 * threaded handlers are active.
117 */
118 wait_event(desc->wait_for_threads, !atomic_read(&desc->threads_active));
119}
120
121/**
122 * synchronize_irq - wait for pending IRQ handlers (on other CPUs)
123 * @irq: interrupt number to wait for
124 *
125 * This function waits for any pending IRQ handlers for this interrupt
126 * to complete before returning. If you use this function while
127 * holding a resource the IRQ handler may need you will deadlock.
128 *
129 * Can only be called from preemptible code as it might sleep when
130 * an interrupt thread is associated to @irq.
131 *
132 * It optionally makes sure (when the irq chip supports that method)
133 * that the interrupt is not pending in any CPU and waiting for
134 * service.
135 */
136void synchronize_irq(unsigned int irq)
137{
138 struct irq_desc *desc = irq_to_desc(irq);
139
140 if (desc)
141 __synchronize_irq(desc);
142}
143EXPORT_SYMBOL(synchronize_irq);
144
145#ifdef CONFIG_SMP
146cpumask_var_t irq_default_affinity;
147
148static bool __irq_can_set_affinity(struct irq_desc *desc)
149{
150 if (!desc || !irqd_can_balance(&desc->irq_data) ||
151 !desc->irq_data.chip || !desc->irq_data.chip->irq_set_affinity)
152 return false;
153 return true;
154}
155
156/**
157 * irq_can_set_affinity - Check if the affinity of a given irq can be set
158 * @irq: Interrupt to check
159 *
160 */
161int irq_can_set_affinity(unsigned int irq)
162{
163 return __irq_can_set_affinity(irq_to_desc(irq));
164}
165
166/**
167 * irq_can_set_affinity_usr - Check if affinity of a irq can be set from user space
168 * @irq: Interrupt to check
169 *
170 * Like irq_can_set_affinity() above, but additionally checks for the
171 * AFFINITY_MANAGED flag.
172 */
173bool irq_can_set_affinity_usr(unsigned int irq)
174{
175 struct irq_desc *desc = irq_to_desc(irq);
176
177 return __irq_can_set_affinity(desc) &&
178 !irqd_affinity_is_managed(&desc->irq_data);
179}
180
181/**
182 * irq_set_thread_affinity - Notify irq threads to adjust affinity
183 * @desc: irq descriptor which has affinity changed
184 *
185 * We just set IRQTF_AFFINITY and delegate the affinity setting
186 * to the interrupt thread itself. We can not call
187 * set_cpus_allowed_ptr() here as we hold desc->lock and this
188 * code can be called from hard interrupt context.
189 */
190void irq_set_thread_affinity(struct irq_desc *desc)
191{
192 struct irqaction *action;
193
194 for_each_action_of_desc(desc, action) {
195 if (action->thread)
196 set_bit(IRQTF_AFFINITY, &action->thread_flags);
197 if (action->secondary && action->secondary->thread)
198 set_bit(IRQTF_AFFINITY, &action->secondary->thread_flags);
199 }
200}
201
202#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK
203static void irq_validate_effective_affinity(struct irq_data *data)
204{
205 const struct cpumask *m = irq_data_get_effective_affinity_mask(data);
206 struct irq_chip *chip = irq_data_get_irq_chip(data);
207
208 if (!cpumask_empty(m))
209 return;
210 pr_warn_once("irq_chip %s did not update eff. affinity mask of irq %u\n",
211 chip->name, data->irq);
212}
213#else
214static inline void irq_validate_effective_affinity(struct irq_data *data) { }
215#endif
216
217int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask,
218 bool force)
219{
220 struct irq_desc *desc = irq_data_to_desc(data);
221 struct irq_chip *chip = irq_data_get_irq_chip(data);
222 const struct cpumask *prog_mask;
223 int ret;
224
225 static DEFINE_RAW_SPINLOCK(tmp_mask_lock);
226 static struct cpumask tmp_mask;
227
228 if (!chip || !chip->irq_set_affinity)
229 return -EINVAL;
230
231 raw_spin_lock(&tmp_mask_lock);
232 /*
233 * If this is a managed interrupt and housekeeping is enabled on
234 * it check whether the requested affinity mask intersects with
235 * a housekeeping CPU. If so, then remove the isolated CPUs from
236 * the mask and just keep the housekeeping CPU(s). This prevents
237 * the affinity setter from routing the interrupt to an isolated
238 * CPU to avoid that I/O submitted from a housekeeping CPU causes
239 * interrupts on an isolated one.
240 *
241 * If the masks do not intersect or include online CPU(s) then
242 * keep the requested mask. The isolated target CPUs are only
243 * receiving interrupts when the I/O operation was submitted
244 * directly from them.
245 *
246 * If all housekeeping CPUs in the affinity mask are offline, the
247 * interrupt will be migrated by the CPU hotplug code once a
248 * housekeeping CPU which belongs to the affinity mask comes
249 * online.
250 */
251 if (irqd_affinity_is_managed(data) &&
252 housekeeping_enabled(HK_TYPE_MANAGED_IRQ)) {
253 const struct cpumask *hk_mask;
254
255 hk_mask = housekeeping_cpumask(HK_TYPE_MANAGED_IRQ);
256
257 cpumask_and(&tmp_mask, mask, hk_mask);
258 if (!cpumask_intersects(&tmp_mask, cpu_online_mask))
259 prog_mask = mask;
260 else
261 prog_mask = &tmp_mask;
262 } else {
263 prog_mask = mask;
264 }
265
266 /*
267 * Make sure we only provide online CPUs to the irqchip,
268 * unless we are being asked to force the affinity (in which
269 * case we do as we are told).
270 */
271 cpumask_and(&tmp_mask, prog_mask, cpu_online_mask);
272 if (!force && !cpumask_empty(&tmp_mask))
273 ret = chip->irq_set_affinity(data, &tmp_mask, force);
274 else if (force)
275 ret = chip->irq_set_affinity(data, mask, force);
276 else
277 ret = -EINVAL;
278
279 raw_spin_unlock(&tmp_mask_lock);
280
281 switch (ret) {
282 case IRQ_SET_MASK_OK:
283 case IRQ_SET_MASK_OK_DONE:
284 cpumask_copy(desc->irq_common_data.affinity, mask);
285 fallthrough;
286 case IRQ_SET_MASK_OK_NOCOPY:
287 irq_validate_effective_affinity(data);
288 irq_set_thread_affinity(desc);
289 ret = 0;
290 }
291
292 return ret;
293}
294
295#ifdef CONFIG_GENERIC_PENDING_IRQ
296static inline int irq_set_affinity_pending(struct irq_data *data,
297 const struct cpumask *dest)
298{
299 struct irq_desc *desc = irq_data_to_desc(data);
300
301 irqd_set_move_pending(data);
302 irq_copy_pending(desc, dest);
303 return 0;
304}
305#else
306static inline int irq_set_affinity_pending(struct irq_data *data,
307 const struct cpumask *dest)
308{
309 return -EBUSY;
310}
311#endif
312
313static int irq_try_set_affinity(struct irq_data *data,
314 const struct cpumask *dest, bool force)
315{
316 int ret = irq_do_set_affinity(data, dest, force);
317
318 /*
319 * In case that the underlying vector management is busy and the
320 * architecture supports the generic pending mechanism then utilize
321 * this to avoid returning an error to user space.
322 */
323 if (ret == -EBUSY && !force)
324 ret = irq_set_affinity_pending(data, dest);
325 return ret;
326}
327
328static bool irq_set_affinity_deactivated(struct irq_data *data,
329 const struct cpumask *mask)
330{
331 struct irq_desc *desc = irq_data_to_desc(data);
332
333 /*
334 * Handle irq chips which can handle affinity only in activated
335 * state correctly
336 *
337 * If the interrupt is not yet activated, just store the affinity
338 * mask and do not call the chip driver at all. On activation the
339 * driver has to make sure anyway that the interrupt is in a
340 * usable state so startup works.
341 */
342 if (!IS_ENABLED(CONFIG_IRQ_DOMAIN_HIERARCHY) ||
343 irqd_is_activated(data) || !irqd_affinity_on_activate(data))
344 return false;
345
346 cpumask_copy(desc->irq_common_data.affinity, mask);
347 irq_data_update_effective_affinity(data, mask);
348 irqd_set(data, IRQD_AFFINITY_SET);
349 return true;
350}
351
352int irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask,
353 bool force)
354{
355 struct irq_chip *chip = irq_data_get_irq_chip(data);
356 struct irq_desc *desc = irq_data_to_desc(data);
357 int ret = 0;
358
359 if (!chip || !chip->irq_set_affinity)
360 return -EINVAL;
361
362 if (irq_set_affinity_deactivated(data, mask))
363 return 0;
364
365 if (irq_can_move_pcntxt(data) && !irqd_is_setaffinity_pending(data)) {
366 ret = irq_try_set_affinity(data, mask, force);
367 } else {
368 irqd_set_move_pending(data);
369 irq_copy_pending(desc, mask);
370 }
371
372 if (desc->affinity_notify) {
373 kref_get(&desc->affinity_notify->kref);
374 if (!schedule_work(&desc->affinity_notify->work)) {
375 /* Work was already scheduled, drop our extra ref */
376 kref_put(&desc->affinity_notify->kref,
377 desc->affinity_notify->release);
378 }
379 }
380 irqd_set(data, IRQD_AFFINITY_SET);
381
382 return ret;
383}
384
385/**
386 * irq_update_affinity_desc - Update affinity management for an interrupt
387 * @irq: The interrupt number to update
388 * @affinity: Pointer to the affinity descriptor
389 *
390 * This interface can be used to configure the affinity management of
391 * interrupts which have been allocated already.
392 *
393 * There are certain limitations on when it may be used - attempts to use it
394 * for when the kernel is configured for generic IRQ reservation mode (in
395 * config GENERIC_IRQ_RESERVATION_MODE) will fail, as it may conflict with
396 * managed/non-managed interrupt accounting. In addition, attempts to use it on
397 * an interrupt which is already started or which has already been configured
398 * as managed will also fail, as these mean invalid init state or double init.
399 */
400int irq_update_affinity_desc(unsigned int irq,
401 struct irq_affinity_desc *affinity)
402{
403 struct irq_desc *desc;
404 unsigned long flags;
405 bool activated;
406 int ret = 0;
407
408 /*
409 * Supporting this with the reservation scheme used by x86 needs
410 * some more thought. Fail it for now.
411 */
412 if (IS_ENABLED(CONFIG_GENERIC_IRQ_RESERVATION_MODE))
413 return -EOPNOTSUPP;
414
415 desc = irq_get_desc_buslock(irq, &flags, 0);
416 if (!desc)
417 return -EINVAL;
418
419 /* Requires the interrupt to be shut down */
420 if (irqd_is_started(&desc->irq_data)) {
421 ret = -EBUSY;
422 goto out_unlock;
423 }
424
425 /* Interrupts which are already managed cannot be modified */
426 if (irqd_affinity_is_managed(&desc->irq_data)) {
427 ret = -EBUSY;
428 goto out_unlock;
429 }
430
431 /*
432 * Deactivate the interrupt. That's required to undo
433 * anything an earlier activation has established.
434 */
435 activated = irqd_is_activated(&desc->irq_data);
436 if (activated)
437 irq_domain_deactivate_irq(&desc->irq_data);
438
439 if (affinity->is_managed) {
440 irqd_set(&desc->irq_data, IRQD_AFFINITY_MANAGED);
441 irqd_set(&desc->irq_data, IRQD_MANAGED_SHUTDOWN);
442 }
443
444 cpumask_copy(desc->irq_common_data.affinity, &affinity->mask);
445
446 /* Restore the activation state */
447 if (activated)
448 irq_domain_activate_irq(&desc->irq_data, false);
449
450out_unlock:
451 irq_put_desc_busunlock(desc, flags);
452 return ret;
453}
454
455static int __irq_set_affinity(unsigned int irq, const struct cpumask *mask,
456 bool force)
457{
458 struct irq_desc *desc = irq_to_desc(irq);
459 unsigned long flags;
460 int ret;
461
462 if (!desc)
463 return -EINVAL;
464
465 raw_spin_lock_irqsave(&desc->lock, flags);
466 ret = irq_set_affinity_locked(irq_desc_get_irq_data(desc), mask, force);
467 raw_spin_unlock_irqrestore(&desc->lock, flags);
468 return ret;
469}
470
471/**
472 * irq_set_affinity - Set the irq affinity of a given irq
473 * @irq: Interrupt to set affinity
474 * @cpumask: cpumask
475 *
476 * Fails if cpumask does not contain an online CPU
477 */
478int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask)
479{
480 return __irq_set_affinity(irq, cpumask, false);
481}
482EXPORT_SYMBOL_GPL(irq_set_affinity);
483
484/**
485 * irq_force_affinity - Force the irq affinity of a given irq
486 * @irq: Interrupt to set affinity
487 * @cpumask: cpumask
488 *
489 * Same as irq_set_affinity, but without checking the mask against
490 * online cpus.
491 *
492 * Solely for low level cpu hotplug code, where we need to make per
493 * cpu interrupts affine before the cpu becomes online.
494 */
495int irq_force_affinity(unsigned int irq, const struct cpumask *cpumask)
496{
497 return __irq_set_affinity(irq, cpumask, true);
498}
499EXPORT_SYMBOL_GPL(irq_force_affinity);
500
501int __irq_apply_affinity_hint(unsigned int irq, const struct cpumask *m,
502 bool setaffinity)
503{
504 unsigned long flags;
505 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
506
507 if (!desc)
508 return -EINVAL;
509 desc->affinity_hint = m;
510 irq_put_desc_unlock(desc, flags);
511 if (m && setaffinity)
512 __irq_set_affinity(irq, m, false);
513 return 0;
514}
515EXPORT_SYMBOL_GPL(__irq_apply_affinity_hint);
516
517static void irq_affinity_notify(struct work_struct *work)
518{
519 struct irq_affinity_notify *notify =
520 container_of(work, struct irq_affinity_notify, work);
521 struct irq_desc *desc = irq_to_desc(notify->irq);
522 cpumask_var_t cpumask;
523 unsigned long flags;
524
525 if (!desc || !alloc_cpumask_var(&cpumask, GFP_KERNEL))
526 goto out;
527
528 raw_spin_lock_irqsave(&desc->lock, flags);
529 if (irq_move_pending(&desc->irq_data))
530 irq_get_pending(cpumask, desc);
531 else
532 cpumask_copy(cpumask, desc->irq_common_data.affinity);
533 raw_spin_unlock_irqrestore(&desc->lock, flags);
534
535 notify->notify(notify, cpumask);
536
537 free_cpumask_var(cpumask);
538out:
539 kref_put(¬ify->kref, notify->release);
540}
541
542/**
543 * irq_set_affinity_notifier - control notification of IRQ affinity changes
544 * @irq: Interrupt for which to enable/disable notification
545 * @notify: Context for notification, or %NULL to disable
546 * notification. Function pointers must be initialised;
547 * the other fields will be initialised by this function.
548 *
549 * Must be called in process context. Notification may only be enabled
550 * after the IRQ is allocated and must be disabled before the IRQ is
551 * freed using free_irq().
552 */
553int
554irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify)
555{
556 struct irq_desc *desc = irq_to_desc(irq);
557 struct irq_affinity_notify *old_notify;
558 unsigned long flags;
559
560 /* The release function is promised process context */
561 might_sleep();
562
563 if (!desc || desc->istate & IRQS_NMI)
564 return -EINVAL;
565
566 /* Complete initialisation of *notify */
567 if (notify) {
568 notify->irq = irq;
569 kref_init(¬ify->kref);
570 INIT_WORK(¬ify->work, irq_affinity_notify);
571 }
572
573 raw_spin_lock_irqsave(&desc->lock, flags);
574 old_notify = desc->affinity_notify;
575 desc->affinity_notify = notify;
576 raw_spin_unlock_irqrestore(&desc->lock, flags);
577
578 if (old_notify) {
579 if (cancel_work_sync(&old_notify->work)) {
580 /* Pending work had a ref, put that one too */
581 kref_put(&old_notify->kref, old_notify->release);
582 }
583 kref_put(&old_notify->kref, old_notify->release);
584 }
585
586 return 0;
587}
588EXPORT_SYMBOL_GPL(irq_set_affinity_notifier);
589
590#ifndef CONFIG_AUTO_IRQ_AFFINITY
591/*
592 * Generic version of the affinity autoselector.
593 */
594int irq_setup_affinity(struct irq_desc *desc)
595{
596 struct cpumask *set = irq_default_affinity;
597 int ret, node = irq_desc_get_node(desc);
598 static DEFINE_RAW_SPINLOCK(mask_lock);
599 static struct cpumask mask;
600
601 /* Excludes PER_CPU and NO_BALANCE interrupts */
602 if (!__irq_can_set_affinity(desc))
603 return 0;
604
605 raw_spin_lock(&mask_lock);
606 /*
607 * Preserve the managed affinity setting and a userspace affinity
608 * setup, but make sure that one of the targets is online.
609 */
610 if (irqd_affinity_is_managed(&desc->irq_data) ||
611 irqd_has_set(&desc->irq_data, IRQD_AFFINITY_SET)) {
612 if (cpumask_intersects(desc->irq_common_data.affinity,
613 cpu_online_mask))
614 set = desc->irq_common_data.affinity;
615 else
616 irqd_clear(&desc->irq_data, IRQD_AFFINITY_SET);
617 }
618
619 cpumask_and(&mask, cpu_online_mask, set);
620 if (cpumask_empty(&mask))
621 cpumask_copy(&mask, cpu_online_mask);
622
623 if (node != NUMA_NO_NODE) {
624 const struct cpumask *nodemask = cpumask_of_node(node);
625
626 /* make sure at least one of the cpus in nodemask is online */
627 if (cpumask_intersects(&mask, nodemask))
628 cpumask_and(&mask, &mask, nodemask);
629 }
630 ret = irq_do_set_affinity(&desc->irq_data, &mask, false);
631 raw_spin_unlock(&mask_lock);
632 return ret;
633}
634#else
635/* Wrapper for ALPHA specific affinity selector magic */
636int irq_setup_affinity(struct irq_desc *desc)
637{
638 return irq_select_affinity(irq_desc_get_irq(desc));
639}
640#endif /* CONFIG_AUTO_IRQ_AFFINITY */
641#endif /* CONFIG_SMP */
642
643
644/**
645 * irq_set_vcpu_affinity - Set vcpu affinity for the interrupt
646 * @irq: interrupt number to set affinity
647 * @vcpu_info: vCPU specific data or pointer to a percpu array of vCPU
648 * specific data for percpu_devid interrupts
649 *
650 * This function uses the vCPU specific data to set the vCPU
651 * affinity for an irq. The vCPU specific data is passed from
652 * outside, such as KVM. One example code path is as below:
653 * KVM -> IOMMU -> irq_set_vcpu_affinity().
654 */
655int irq_set_vcpu_affinity(unsigned int irq, void *vcpu_info)
656{
657 unsigned long flags;
658 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
659 struct irq_data *data;
660 struct irq_chip *chip;
661 int ret = -ENOSYS;
662
663 if (!desc)
664 return -EINVAL;
665
666 data = irq_desc_get_irq_data(desc);
667 do {
668 chip = irq_data_get_irq_chip(data);
669 if (chip && chip->irq_set_vcpu_affinity)
670 break;
671#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
672 data = data->parent_data;
673#else
674 data = NULL;
675#endif
676 } while (data);
677
678 if (data)
679 ret = chip->irq_set_vcpu_affinity(data, vcpu_info);
680 irq_put_desc_unlock(desc, flags);
681
682 return ret;
683}
684EXPORT_SYMBOL_GPL(irq_set_vcpu_affinity);
685
686void __disable_irq(struct irq_desc *desc)
687{
688 if (!desc->depth++)
689 irq_disable(desc);
690}
691
692static int __disable_irq_nosync(unsigned int irq)
693{
694 unsigned long flags;
695 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
696
697 if (!desc)
698 return -EINVAL;
699 __disable_irq(desc);
700 irq_put_desc_busunlock(desc, flags);
701 return 0;
702}
703
704/**
705 * disable_irq_nosync - disable an irq without waiting
706 * @irq: Interrupt to disable
707 *
708 * Disable the selected interrupt line. Disables and Enables are
709 * nested.
710 * Unlike disable_irq(), this function does not ensure existing
711 * instances of the IRQ handler have completed before returning.
712 *
713 * This function may be called from IRQ context.
714 */
715void disable_irq_nosync(unsigned int irq)
716{
717 __disable_irq_nosync(irq);
718}
719EXPORT_SYMBOL(disable_irq_nosync);
720
721/**
722 * disable_irq - disable an irq and wait for completion
723 * @irq: Interrupt to disable
724 *
725 * Disable the selected interrupt line. Enables and Disables are
726 * nested.
727 * This function waits for any pending IRQ handlers for this interrupt
728 * to complete before returning. If you use this function while
729 * holding a resource the IRQ handler may need you will deadlock.
730 *
731 * Can only be called from preemptible code as it might sleep when
732 * an interrupt thread is associated to @irq.
733 *
734 */
735void disable_irq(unsigned int irq)
736{
737 might_sleep();
738 if (!__disable_irq_nosync(irq))
739 synchronize_irq(irq);
740}
741EXPORT_SYMBOL(disable_irq);
742
743/**
744 * disable_hardirq - disables an irq and waits for hardirq completion
745 * @irq: Interrupt to disable
746 *
747 * Disable the selected interrupt line. Enables and Disables are
748 * nested.
749 * This function waits for any pending hard IRQ handlers for this
750 * interrupt to complete before returning. If you use this function while
751 * holding a resource the hard IRQ handler may need you will deadlock.
752 *
753 * When used to optimistically disable an interrupt from atomic context
754 * the return value must be checked.
755 *
756 * Returns: false if a threaded handler is active.
757 *
758 * This function may be called - with care - from IRQ context.
759 */
760bool disable_hardirq(unsigned int irq)
761{
762 if (!__disable_irq_nosync(irq))
763 return synchronize_hardirq(irq);
764
765 return false;
766}
767EXPORT_SYMBOL_GPL(disable_hardirq);
768
769/**
770 * disable_nmi_nosync - disable an nmi without waiting
771 * @irq: Interrupt to disable
772 *
773 * Disable the selected interrupt line. Disables and enables are
774 * nested.
775 * The interrupt to disable must have been requested through request_nmi.
776 * Unlike disable_nmi(), this function does not ensure existing
777 * instances of the IRQ handler have completed before returning.
778 */
779void disable_nmi_nosync(unsigned int irq)
780{
781 disable_irq_nosync(irq);
782}
783
784void __enable_irq(struct irq_desc *desc)
785{
786 switch (desc->depth) {
787 case 0:
788 err_out:
789 WARN(1, KERN_WARNING "Unbalanced enable for IRQ %d\n",
790 irq_desc_get_irq(desc));
791 break;
792 case 1: {
793 if (desc->istate & IRQS_SUSPENDED)
794 goto err_out;
795 /* Prevent probing on this irq: */
796 irq_settings_set_noprobe(desc);
797 /*
798 * Call irq_startup() not irq_enable() here because the
799 * interrupt might be marked NOAUTOEN. So irq_startup()
800 * needs to be invoked when it gets enabled the first
801 * time. If it was already started up, then irq_startup()
802 * will invoke irq_enable() under the hood.
803 */
804 irq_startup(desc, IRQ_RESEND, IRQ_START_FORCE);
805 break;
806 }
807 default:
808 desc->depth--;
809 }
810}
811
812/**
813 * enable_irq - enable handling of an irq
814 * @irq: Interrupt to enable
815 *
816 * Undoes the effect of one call to disable_irq(). If this
817 * matches the last disable, processing of interrupts on this
818 * IRQ line is re-enabled.
819 *
820 * This function may be called from IRQ context only when
821 * desc->irq_data.chip->bus_lock and desc->chip->bus_sync_unlock are NULL !
822 */
823void enable_irq(unsigned int irq)
824{
825 unsigned long flags;
826 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
827
828 if (!desc)
829 return;
830 if (WARN(!desc->irq_data.chip,
831 KERN_ERR "enable_irq before setup/request_irq: irq %u\n", irq))
832 goto out;
833
834 __enable_irq(desc);
835out:
836 irq_put_desc_busunlock(desc, flags);
837}
838EXPORT_SYMBOL(enable_irq);
839
840/**
841 * enable_nmi - enable handling of an nmi
842 * @irq: Interrupt to enable
843 *
844 * The interrupt to enable must have been requested through request_nmi.
845 * Undoes the effect of one call to disable_nmi(). If this
846 * matches the last disable, processing of interrupts on this
847 * IRQ line is re-enabled.
848 */
849void enable_nmi(unsigned int irq)
850{
851 enable_irq(irq);
852}
853
854static int set_irq_wake_real(unsigned int irq, unsigned int on)
855{
856 struct irq_desc *desc = irq_to_desc(irq);
857 int ret = -ENXIO;
858
859 if (irq_desc_get_chip(desc)->flags & IRQCHIP_SKIP_SET_WAKE)
860 return 0;
861
862 if (desc->irq_data.chip->irq_set_wake)
863 ret = desc->irq_data.chip->irq_set_wake(&desc->irq_data, on);
864
865 return ret;
866}
867
868/**
869 * irq_set_irq_wake - control irq power management wakeup
870 * @irq: interrupt to control
871 * @on: enable/disable power management wakeup
872 *
873 * Enable/disable power management wakeup mode, which is
874 * disabled by default. Enables and disables must match,
875 * just as they match for non-wakeup mode support.
876 *
877 * Wakeup mode lets this IRQ wake the system from sleep
878 * states like "suspend to RAM".
879 *
880 * Note: irq enable/disable state is completely orthogonal
881 * to the enable/disable state of irq wake. An irq can be
882 * disabled with disable_irq() and still wake the system as
883 * long as the irq has wake enabled. If this does not hold,
884 * then the underlying irq chip and the related driver need
885 * to be investigated.
886 */
887int irq_set_irq_wake(unsigned int irq, unsigned int on)
888{
889 unsigned long flags;
890 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
891 int ret = 0;
892
893 if (!desc)
894 return -EINVAL;
895
896 /* Don't use NMIs as wake up interrupts please */
897 if (desc->istate & IRQS_NMI) {
898 ret = -EINVAL;
899 goto out_unlock;
900 }
901
902 /* wakeup-capable irqs can be shared between drivers that
903 * don't need to have the same sleep mode behaviors.
904 */
905 if (on) {
906 if (desc->wake_depth++ == 0) {
907 ret = set_irq_wake_real(irq, on);
908 if (ret)
909 desc->wake_depth = 0;
910 else
911 irqd_set(&desc->irq_data, IRQD_WAKEUP_STATE);
912 }
913 } else {
914 if (desc->wake_depth == 0) {
915 WARN(1, "Unbalanced IRQ %d wake disable\n", irq);
916 } else if (--desc->wake_depth == 0) {
917 ret = set_irq_wake_real(irq, on);
918 if (ret)
919 desc->wake_depth = 1;
920 else
921 irqd_clear(&desc->irq_data, IRQD_WAKEUP_STATE);
922 }
923 }
924
925out_unlock:
926 irq_put_desc_busunlock(desc, flags);
927 return ret;
928}
929EXPORT_SYMBOL(irq_set_irq_wake);
930
931/*
932 * Internal function that tells the architecture code whether a
933 * particular irq has been exclusively allocated or is available
934 * for driver use.
935 */
936int can_request_irq(unsigned int irq, unsigned long irqflags)
937{
938 unsigned long flags;
939 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
940 int canrequest = 0;
941
942 if (!desc)
943 return 0;
944
945 if (irq_settings_can_request(desc)) {
946 if (!desc->action ||
947 irqflags & desc->action->flags & IRQF_SHARED)
948 canrequest = 1;
949 }
950 irq_put_desc_unlock(desc, flags);
951 return canrequest;
952}
953
954int __irq_set_trigger(struct irq_desc *desc, unsigned long flags)
955{
956 struct irq_chip *chip = desc->irq_data.chip;
957 int ret, unmask = 0;
958
959 if (!chip || !chip->irq_set_type) {
960 /*
961 * IRQF_TRIGGER_* but the PIC does not support multiple
962 * flow-types?
963 */
964 pr_debug("No set_type function for IRQ %d (%s)\n",
965 irq_desc_get_irq(desc),
966 chip ? (chip->name ? : "unknown") : "unknown");
967 return 0;
968 }
969
970 if (chip->flags & IRQCHIP_SET_TYPE_MASKED) {
971 if (!irqd_irq_masked(&desc->irq_data))
972 mask_irq(desc);
973 if (!irqd_irq_disabled(&desc->irq_data))
974 unmask = 1;
975 }
976
977 /* Mask all flags except trigger mode */
978 flags &= IRQ_TYPE_SENSE_MASK;
979 ret = chip->irq_set_type(&desc->irq_data, flags);
980
981 switch (ret) {
982 case IRQ_SET_MASK_OK:
983 case IRQ_SET_MASK_OK_DONE:
984 irqd_clear(&desc->irq_data, IRQD_TRIGGER_MASK);
985 irqd_set(&desc->irq_data, flags);
986 fallthrough;
987
988 case IRQ_SET_MASK_OK_NOCOPY:
989 flags = irqd_get_trigger_type(&desc->irq_data);
990 irq_settings_set_trigger_mask(desc, flags);
991 irqd_clear(&desc->irq_data, IRQD_LEVEL);
992 irq_settings_clr_level(desc);
993 if (flags & IRQ_TYPE_LEVEL_MASK) {
994 irq_settings_set_level(desc);
995 irqd_set(&desc->irq_data, IRQD_LEVEL);
996 }
997
998 ret = 0;
999 break;
1000 default:
1001 pr_err("Setting trigger mode %lu for irq %u failed (%pS)\n",
1002 flags, irq_desc_get_irq(desc), chip->irq_set_type);
1003 }
1004 if (unmask)
1005 unmask_irq(desc);
1006 return ret;
1007}
1008
1009#ifdef CONFIG_HARDIRQS_SW_RESEND
1010int irq_set_parent(int irq, int parent_irq)
1011{
1012 unsigned long flags;
1013 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
1014
1015 if (!desc)
1016 return -EINVAL;
1017
1018 desc->parent_irq = parent_irq;
1019
1020 irq_put_desc_unlock(desc, flags);
1021 return 0;
1022}
1023EXPORT_SYMBOL_GPL(irq_set_parent);
1024#endif
1025
1026/*
1027 * Default primary interrupt handler for threaded interrupts. Is
1028 * assigned as primary handler when request_threaded_irq is called
1029 * with handler == NULL. Useful for oneshot interrupts.
1030 */
1031static irqreturn_t irq_default_primary_handler(int irq, void *dev_id)
1032{
1033 return IRQ_WAKE_THREAD;
1034}
1035
1036/*
1037 * Primary handler for nested threaded interrupts. Should never be
1038 * called.
1039 */
1040static irqreturn_t irq_nested_primary_handler(int irq, void *dev_id)
1041{
1042 WARN(1, "Primary handler called for nested irq %d\n", irq);
1043 return IRQ_NONE;
1044}
1045
1046static irqreturn_t irq_forced_secondary_handler(int irq, void *dev_id)
1047{
1048 WARN(1, "Secondary action handler called for irq %d\n", irq);
1049 return IRQ_NONE;
1050}
1051
1052static int irq_wait_for_interrupt(struct irqaction *action)
1053{
1054 for (;;) {
1055 set_current_state(TASK_INTERRUPTIBLE);
1056
1057 if (kthread_should_stop()) {
1058 /* may need to run one last time */
1059 if (test_and_clear_bit(IRQTF_RUNTHREAD,
1060 &action->thread_flags)) {
1061 __set_current_state(TASK_RUNNING);
1062 return 0;
1063 }
1064 __set_current_state(TASK_RUNNING);
1065 return -1;
1066 }
1067
1068 if (test_and_clear_bit(IRQTF_RUNTHREAD,
1069 &action->thread_flags)) {
1070 __set_current_state(TASK_RUNNING);
1071 return 0;
1072 }
1073 schedule();
1074 }
1075}
1076
1077/*
1078 * Oneshot interrupts keep the irq line masked until the threaded
1079 * handler finished. unmask if the interrupt has not been disabled and
1080 * is marked MASKED.
1081 */
1082static void irq_finalize_oneshot(struct irq_desc *desc,
1083 struct irqaction *action)
1084{
1085 if (!(desc->istate & IRQS_ONESHOT) ||
1086 action->handler == irq_forced_secondary_handler)
1087 return;
1088again:
1089 chip_bus_lock(desc);
1090 raw_spin_lock_irq(&desc->lock);
1091
1092 /*
1093 * Implausible though it may be we need to protect us against
1094 * the following scenario:
1095 *
1096 * The thread is faster done than the hard interrupt handler
1097 * on the other CPU. If we unmask the irq line then the
1098 * interrupt can come in again and masks the line, leaves due
1099 * to IRQS_INPROGRESS and the irq line is masked forever.
1100 *
1101 * This also serializes the state of shared oneshot handlers
1102 * versus "desc->threads_oneshot |= action->thread_mask;" in
1103 * irq_wake_thread(). See the comment there which explains the
1104 * serialization.
1105 */
1106 if (unlikely(irqd_irq_inprogress(&desc->irq_data))) {
1107 raw_spin_unlock_irq(&desc->lock);
1108 chip_bus_sync_unlock(desc);
1109 cpu_relax();
1110 goto again;
1111 }
1112
1113 /*
1114 * Now check again, whether the thread should run. Otherwise
1115 * we would clear the threads_oneshot bit of this thread which
1116 * was just set.
1117 */
1118 if (test_bit(IRQTF_RUNTHREAD, &action->thread_flags))
1119 goto out_unlock;
1120
1121 desc->threads_oneshot &= ~action->thread_mask;
1122
1123 if (!desc->threads_oneshot && !irqd_irq_disabled(&desc->irq_data) &&
1124 irqd_irq_masked(&desc->irq_data))
1125 unmask_threaded_irq(desc);
1126
1127out_unlock:
1128 raw_spin_unlock_irq(&desc->lock);
1129 chip_bus_sync_unlock(desc);
1130}
1131
1132#ifdef CONFIG_SMP
1133/*
1134 * Check whether we need to change the affinity of the interrupt thread.
1135 */
1136static void
1137irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
1138{
1139 cpumask_var_t mask;
1140 bool valid = true;
1141
1142 if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags))
1143 return;
1144
1145 /*
1146 * In case we are out of memory we set IRQTF_AFFINITY again and
1147 * try again next time
1148 */
1149 if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
1150 set_bit(IRQTF_AFFINITY, &action->thread_flags);
1151 return;
1152 }
1153
1154 raw_spin_lock_irq(&desc->lock);
1155 /*
1156 * This code is triggered unconditionally. Check the affinity
1157 * mask pointer. For CPU_MASK_OFFSTACK=n this is optimized out.
1158 */
1159 if (cpumask_available(desc->irq_common_data.affinity)) {
1160 const struct cpumask *m;
1161
1162 m = irq_data_get_effective_affinity_mask(&desc->irq_data);
1163 cpumask_copy(mask, m);
1164 } else {
1165 valid = false;
1166 }
1167 raw_spin_unlock_irq(&desc->lock);
1168
1169 if (valid)
1170 set_cpus_allowed_ptr(current, mask);
1171 free_cpumask_var(mask);
1172}
1173#else
1174static inline void
1175irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { }
1176#endif
1177
1178/*
1179 * Interrupts which are not explicitly requested as threaded
1180 * interrupts rely on the implicit bh/preempt disable of the hard irq
1181 * context. So we need to disable bh here to avoid deadlocks and other
1182 * side effects.
1183 */
1184static irqreturn_t
1185irq_forced_thread_fn(struct irq_desc *desc, struct irqaction *action)
1186{
1187 irqreturn_t ret;
1188
1189 local_bh_disable();
1190 if (!IS_ENABLED(CONFIG_PREEMPT_RT))
1191 local_irq_disable();
1192 ret = action->thread_fn(action->irq, action->dev_id);
1193 if (ret == IRQ_HANDLED)
1194 atomic_inc(&desc->threads_handled);
1195
1196 irq_finalize_oneshot(desc, action);
1197 if (!IS_ENABLED(CONFIG_PREEMPT_RT))
1198 local_irq_enable();
1199 local_bh_enable();
1200 return ret;
1201}
1202
1203/*
1204 * Interrupts explicitly requested as threaded interrupts want to be
1205 * preemptible - many of them need to sleep and wait for slow busses to
1206 * complete.
1207 */
1208static irqreturn_t irq_thread_fn(struct irq_desc *desc,
1209 struct irqaction *action)
1210{
1211 irqreturn_t ret;
1212
1213 ret = action->thread_fn(action->irq, action->dev_id);
1214 if (ret == IRQ_HANDLED)
1215 atomic_inc(&desc->threads_handled);
1216
1217 irq_finalize_oneshot(desc, action);
1218 return ret;
1219}
1220
1221void wake_threads_waitq(struct irq_desc *desc)
1222{
1223 if (atomic_dec_and_test(&desc->threads_active))
1224 wake_up(&desc->wait_for_threads);
1225}
1226
1227static void irq_thread_dtor(struct callback_head *unused)
1228{
1229 struct task_struct *tsk = current;
1230 struct irq_desc *desc;
1231 struct irqaction *action;
1232
1233 if (WARN_ON_ONCE(!(current->flags & PF_EXITING)))
1234 return;
1235
1236 action = kthread_data(tsk);
1237
1238 pr_err("exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n",
1239 tsk->comm, tsk->pid, action->irq);
1240
1241
1242 desc = irq_to_desc(action->irq);
1243 /*
1244 * If IRQTF_RUNTHREAD is set, we need to decrement
1245 * desc->threads_active and wake possible waiters.
1246 */
1247 if (test_and_clear_bit(IRQTF_RUNTHREAD, &action->thread_flags))
1248 wake_threads_waitq(desc);
1249
1250 /* Prevent a stale desc->threads_oneshot */
1251 irq_finalize_oneshot(desc, action);
1252}
1253
1254static void irq_wake_secondary(struct irq_desc *desc, struct irqaction *action)
1255{
1256 struct irqaction *secondary = action->secondary;
1257
1258 if (WARN_ON_ONCE(!secondary))
1259 return;
1260
1261 raw_spin_lock_irq(&desc->lock);
1262 __irq_wake_thread(desc, secondary);
1263 raw_spin_unlock_irq(&desc->lock);
1264}
1265
1266/*
1267 * Internal function to notify that a interrupt thread is ready.
1268 */
1269static void irq_thread_set_ready(struct irq_desc *desc,
1270 struct irqaction *action)
1271{
1272 set_bit(IRQTF_READY, &action->thread_flags);
1273 wake_up(&desc->wait_for_threads);
1274}
1275
1276/*
1277 * Internal function to wake up a interrupt thread and wait until it is
1278 * ready.
1279 */
1280static void wake_up_and_wait_for_irq_thread_ready(struct irq_desc *desc,
1281 struct irqaction *action)
1282{
1283 if (!action || !action->thread)
1284 return;
1285
1286 wake_up_process(action->thread);
1287 wait_event(desc->wait_for_threads,
1288 test_bit(IRQTF_READY, &action->thread_flags));
1289}
1290
1291/*
1292 * Interrupt handler thread
1293 */
1294static int irq_thread(void *data)
1295{
1296 struct callback_head on_exit_work;
1297 struct irqaction *action = data;
1298 struct irq_desc *desc = irq_to_desc(action->irq);
1299 irqreturn_t (*handler_fn)(struct irq_desc *desc,
1300 struct irqaction *action);
1301
1302 irq_thread_set_ready(desc, action);
1303
1304 sched_set_fifo(current);
1305
1306 if (force_irqthreads() && test_bit(IRQTF_FORCED_THREAD,
1307 &action->thread_flags))
1308 handler_fn = irq_forced_thread_fn;
1309 else
1310 handler_fn = irq_thread_fn;
1311
1312 init_task_work(&on_exit_work, irq_thread_dtor);
1313 task_work_add(current, &on_exit_work, TWA_NONE);
1314
1315 irq_thread_check_affinity(desc, action);
1316
1317 while (!irq_wait_for_interrupt(action)) {
1318 irqreturn_t action_ret;
1319
1320 irq_thread_check_affinity(desc, action);
1321
1322 action_ret = handler_fn(desc, action);
1323 if (action_ret == IRQ_WAKE_THREAD)
1324 irq_wake_secondary(desc, action);
1325
1326 wake_threads_waitq(desc);
1327 }
1328
1329 /*
1330 * This is the regular exit path. __free_irq() is stopping the
1331 * thread via kthread_stop() after calling
1332 * synchronize_hardirq(). So neither IRQTF_RUNTHREAD nor the
1333 * oneshot mask bit can be set.
1334 */
1335 task_work_cancel(current, irq_thread_dtor);
1336 return 0;
1337}
1338
1339/**
1340 * irq_wake_thread - wake the irq thread for the action identified by dev_id
1341 * @irq: Interrupt line
1342 * @dev_id: Device identity for which the thread should be woken
1343 *
1344 */
1345void irq_wake_thread(unsigned int irq, void *dev_id)
1346{
1347 struct irq_desc *desc = irq_to_desc(irq);
1348 struct irqaction *action;
1349 unsigned long flags;
1350
1351 if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1352 return;
1353
1354 raw_spin_lock_irqsave(&desc->lock, flags);
1355 for_each_action_of_desc(desc, action) {
1356 if (action->dev_id == dev_id) {
1357 if (action->thread)
1358 __irq_wake_thread(desc, action);
1359 break;
1360 }
1361 }
1362 raw_spin_unlock_irqrestore(&desc->lock, flags);
1363}
1364EXPORT_SYMBOL_GPL(irq_wake_thread);
1365
1366static int irq_setup_forced_threading(struct irqaction *new)
1367{
1368 if (!force_irqthreads())
1369 return 0;
1370 if (new->flags & (IRQF_NO_THREAD | IRQF_PERCPU | IRQF_ONESHOT))
1371 return 0;
1372
1373 /*
1374 * No further action required for interrupts which are requested as
1375 * threaded interrupts already
1376 */
1377 if (new->handler == irq_default_primary_handler)
1378 return 0;
1379
1380 new->flags |= IRQF_ONESHOT;
1381
1382 /*
1383 * Handle the case where we have a real primary handler and a
1384 * thread handler. We force thread them as well by creating a
1385 * secondary action.
1386 */
1387 if (new->handler && new->thread_fn) {
1388 /* Allocate the secondary action */
1389 new->secondary = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
1390 if (!new->secondary)
1391 return -ENOMEM;
1392 new->secondary->handler = irq_forced_secondary_handler;
1393 new->secondary->thread_fn = new->thread_fn;
1394 new->secondary->dev_id = new->dev_id;
1395 new->secondary->irq = new->irq;
1396 new->secondary->name = new->name;
1397 }
1398 /* Deal with the primary handler */
1399 set_bit(IRQTF_FORCED_THREAD, &new->thread_flags);
1400 new->thread_fn = new->handler;
1401 new->handler = irq_default_primary_handler;
1402 return 0;
1403}
1404
1405static int irq_request_resources(struct irq_desc *desc)
1406{
1407 struct irq_data *d = &desc->irq_data;
1408 struct irq_chip *c = d->chip;
1409
1410 return c->irq_request_resources ? c->irq_request_resources(d) : 0;
1411}
1412
1413static void irq_release_resources(struct irq_desc *desc)
1414{
1415 struct irq_data *d = &desc->irq_data;
1416 struct irq_chip *c = d->chip;
1417
1418 if (c->irq_release_resources)
1419 c->irq_release_resources(d);
1420}
1421
1422static bool irq_supports_nmi(struct irq_desc *desc)
1423{
1424 struct irq_data *d = irq_desc_get_irq_data(desc);
1425
1426#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
1427 /* Only IRQs directly managed by the root irqchip can be set as NMI */
1428 if (d->parent_data)
1429 return false;
1430#endif
1431 /* Don't support NMIs for chips behind a slow bus */
1432 if (d->chip->irq_bus_lock || d->chip->irq_bus_sync_unlock)
1433 return false;
1434
1435 return d->chip->flags & IRQCHIP_SUPPORTS_NMI;
1436}
1437
1438static int irq_nmi_setup(struct irq_desc *desc)
1439{
1440 struct irq_data *d = irq_desc_get_irq_data(desc);
1441 struct irq_chip *c = d->chip;
1442
1443 return c->irq_nmi_setup ? c->irq_nmi_setup(d) : -EINVAL;
1444}
1445
1446static void irq_nmi_teardown(struct irq_desc *desc)
1447{
1448 struct irq_data *d = irq_desc_get_irq_data(desc);
1449 struct irq_chip *c = d->chip;
1450
1451 if (c->irq_nmi_teardown)
1452 c->irq_nmi_teardown(d);
1453}
1454
1455static int
1456setup_irq_thread(struct irqaction *new, unsigned int irq, bool secondary)
1457{
1458 struct task_struct *t;
1459
1460 if (!secondary) {
1461 t = kthread_create(irq_thread, new, "irq/%d-%s", irq,
1462 new->name);
1463 } else {
1464 t = kthread_create(irq_thread, new, "irq/%d-s-%s", irq,
1465 new->name);
1466 }
1467
1468 if (IS_ERR(t))
1469 return PTR_ERR(t);
1470
1471 /*
1472 * We keep the reference to the task struct even if
1473 * the thread dies to avoid that the interrupt code
1474 * references an already freed task_struct.
1475 */
1476 new->thread = get_task_struct(t);
1477 /*
1478 * Tell the thread to set its affinity. This is
1479 * important for shared interrupt handlers as we do
1480 * not invoke setup_affinity() for the secondary
1481 * handlers as everything is already set up. Even for
1482 * interrupts marked with IRQF_NO_BALANCE this is
1483 * correct as we want the thread to move to the cpu(s)
1484 * on which the requesting code placed the interrupt.
1485 */
1486 set_bit(IRQTF_AFFINITY, &new->thread_flags);
1487 return 0;
1488}
1489
1490/*
1491 * Internal function to register an irqaction - typically used to
1492 * allocate special interrupts that are part of the architecture.
1493 *
1494 * Locking rules:
1495 *
1496 * desc->request_mutex Provides serialization against a concurrent free_irq()
1497 * chip_bus_lock Provides serialization for slow bus operations
1498 * desc->lock Provides serialization against hard interrupts
1499 *
1500 * chip_bus_lock and desc->lock are sufficient for all other management and
1501 * interrupt related functions. desc->request_mutex solely serializes
1502 * request/free_irq().
1503 */
1504static int
1505__setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
1506{
1507 struct irqaction *old, **old_ptr;
1508 unsigned long flags, thread_mask = 0;
1509 int ret, nested, shared = 0;
1510
1511 if (!desc)
1512 return -EINVAL;
1513
1514 if (desc->irq_data.chip == &no_irq_chip)
1515 return -ENOSYS;
1516 if (!try_module_get(desc->owner))
1517 return -ENODEV;
1518
1519 new->irq = irq;
1520
1521 /*
1522 * If the trigger type is not specified by the caller,
1523 * then use the default for this interrupt.
1524 */
1525 if (!(new->flags & IRQF_TRIGGER_MASK))
1526 new->flags |= irqd_get_trigger_type(&desc->irq_data);
1527
1528 /*
1529 * Check whether the interrupt nests into another interrupt
1530 * thread.
1531 */
1532 nested = irq_settings_is_nested_thread(desc);
1533 if (nested) {
1534 if (!new->thread_fn) {
1535 ret = -EINVAL;
1536 goto out_mput;
1537 }
1538 /*
1539 * Replace the primary handler which was provided from
1540 * the driver for non nested interrupt handling by the
1541 * dummy function which warns when called.
1542 */
1543 new->handler = irq_nested_primary_handler;
1544 } else {
1545 if (irq_settings_can_thread(desc)) {
1546 ret = irq_setup_forced_threading(new);
1547 if (ret)
1548 goto out_mput;
1549 }
1550 }
1551
1552 /*
1553 * Create a handler thread when a thread function is supplied
1554 * and the interrupt does not nest into another interrupt
1555 * thread.
1556 */
1557 if (new->thread_fn && !nested) {
1558 ret = setup_irq_thread(new, irq, false);
1559 if (ret)
1560 goto out_mput;
1561 if (new->secondary) {
1562 ret = setup_irq_thread(new->secondary, irq, true);
1563 if (ret)
1564 goto out_thread;
1565 }
1566 }
1567
1568 /*
1569 * Drivers are often written to work w/o knowledge about the
1570 * underlying irq chip implementation, so a request for a
1571 * threaded irq without a primary hard irq context handler
1572 * requires the ONESHOT flag to be set. Some irq chips like
1573 * MSI based interrupts are per se one shot safe. Check the
1574 * chip flags, so we can avoid the unmask dance at the end of
1575 * the threaded handler for those.
1576 */
1577 if (desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)
1578 new->flags &= ~IRQF_ONESHOT;
1579
1580 /*
1581 * Protects against a concurrent __free_irq() call which might wait
1582 * for synchronize_hardirq() to complete without holding the optional
1583 * chip bus lock and desc->lock. Also protects against handing out
1584 * a recycled oneshot thread_mask bit while it's still in use by
1585 * its previous owner.
1586 */
1587 mutex_lock(&desc->request_mutex);
1588
1589 /*
1590 * Acquire bus lock as the irq_request_resources() callback below
1591 * might rely on the serialization or the magic power management
1592 * functions which are abusing the irq_bus_lock() callback,
1593 */
1594 chip_bus_lock(desc);
1595
1596 /* First installed action requests resources. */
1597 if (!desc->action) {
1598 ret = irq_request_resources(desc);
1599 if (ret) {
1600 pr_err("Failed to request resources for %s (irq %d) on irqchip %s\n",
1601 new->name, irq, desc->irq_data.chip->name);
1602 goto out_bus_unlock;
1603 }
1604 }
1605
1606 /*
1607 * The following block of code has to be executed atomically
1608 * protected against a concurrent interrupt and any of the other
1609 * management calls which are not serialized via
1610 * desc->request_mutex or the optional bus lock.
1611 */
1612 raw_spin_lock_irqsave(&desc->lock, flags);
1613 old_ptr = &desc->action;
1614 old = *old_ptr;
1615 if (old) {
1616 /*
1617 * Can't share interrupts unless both agree to and are
1618 * the same type (level, edge, polarity). So both flag
1619 * fields must have IRQF_SHARED set and the bits which
1620 * set the trigger type must match. Also all must
1621 * agree on ONESHOT.
1622 * Interrupt lines used for NMIs cannot be shared.
1623 */
1624 unsigned int oldtype;
1625
1626 if (desc->istate & IRQS_NMI) {
1627 pr_err("Invalid attempt to share NMI for %s (irq %d) on irqchip %s.\n",
1628 new->name, irq, desc->irq_data.chip->name);
1629 ret = -EINVAL;
1630 goto out_unlock;
1631 }
1632
1633 /*
1634 * If nobody did set the configuration before, inherit
1635 * the one provided by the requester.
1636 */
1637 if (irqd_trigger_type_was_set(&desc->irq_data)) {
1638 oldtype = irqd_get_trigger_type(&desc->irq_data);
1639 } else {
1640 oldtype = new->flags & IRQF_TRIGGER_MASK;
1641 irqd_set_trigger_type(&desc->irq_data, oldtype);
1642 }
1643
1644 if (!((old->flags & new->flags) & IRQF_SHARED) ||
1645 (oldtype != (new->flags & IRQF_TRIGGER_MASK)) ||
1646 ((old->flags ^ new->flags) & IRQF_ONESHOT))
1647 goto mismatch;
1648
1649 /* All handlers must agree on per-cpuness */
1650 if ((old->flags & IRQF_PERCPU) !=
1651 (new->flags & IRQF_PERCPU))
1652 goto mismatch;
1653
1654 /* add new interrupt at end of irq queue */
1655 do {
1656 /*
1657 * Or all existing action->thread_mask bits,
1658 * so we can find the next zero bit for this
1659 * new action.
1660 */
1661 thread_mask |= old->thread_mask;
1662 old_ptr = &old->next;
1663 old = *old_ptr;
1664 } while (old);
1665 shared = 1;
1666 }
1667
1668 /*
1669 * Setup the thread mask for this irqaction for ONESHOT. For
1670 * !ONESHOT irqs the thread mask is 0 so we can avoid a
1671 * conditional in irq_wake_thread().
1672 */
1673 if (new->flags & IRQF_ONESHOT) {
1674 /*
1675 * Unlikely to have 32 resp 64 irqs sharing one line,
1676 * but who knows.
1677 */
1678 if (thread_mask == ~0UL) {
1679 ret = -EBUSY;
1680 goto out_unlock;
1681 }
1682 /*
1683 * The thread_mask for the action is or'ed to
1684 * desc->thread_active to indicate that the
1685 * IRQF_ONESHOT thread handler has been woken, but not
1686 * yet finished. The bit is cleared when a thread
1687 * completes. When all threads of a shared interrupt
1688 * line have completed desc->threads_active becomes
1689 * zero and the interrupt line is unmasked. See
1690 * handle.c:irq_wake_thread() for further information.
1691 *
1692 * If no thread is woken by primary (hard irq context)
1693 * interrupt handlers, then desc->threads_active is
1694 * also checked for zero to unmask the irq line in the
1695 * affected hard irq flow handlers
1696 * (handle_[fasteoi|level]_irq).
1697 *
1698 * The new action gets the first zero bit of
1699 * thread_mask assigned. See the loop above which or's
1700 * all existing action->thread_mask bits.
1701 */
1702 new->thread_mask = 1UL << ffz(thread_mask);
1703
1704 } else if (new->handler == irq_default_primary_handler &&
1705 !(desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)) {
1706 /*
1707 * The interrupt was requested with handler = NULL, so
1708 * we use the default primary handler for it. But it
1709 * does not have the oneshot flag set. In combination
1710 * with level interrupts this is deadly, because the
1711 * default primary handler just wakes the thread, then
1712 * the irq lines is reenabled, but the device still
1713 * has the level irq asserted. Rinse and repeat....
1714 *
1715 * While this works for edge type interrupts, we play
1716 * it safe and reject unconditionally because we can't
1717 * say for sure which type this interrupt really
1718 * has. The type flags are unreliable as the
1719 * underlying chip implementation can override them.
1720 */
1721 pr_err("Threaded irq requested with handler=NULL and !ONESHOT for %s (irq %d)\n",
1722 new->name, irq);
1723 ret = -EINVAL;
1724 goto out_unlock;
1725 }
1726
1727 if (!shared) {
1728 /* Setup the type (level, edge polarity) if configured: */
1729 if (new->flags & IRQF_TRIGGER_MASK) {
1730 ret = __irq_set_trigger(desc,
1731 new->flags & IRQF_TRIGGER_MASK);
1732
1733 if (ret)
1734 goto out_unlock;
1735 }
1736
1737 /*
1738 * Activate the interrupt. That activation must happen
1739 * independently of IRQ_NOAUTOEN. request_irq() can fail
1740 * and the callers are supposed to handle
1741 * that. enable_irq() of an interrupt requested with
1742 * IRQ_NOAUTOEN is not supposed to fail. The activation
1743 * keeps it in shutdown mode, it merily associates
1744 * resources if necessary and if that's not possible it
1745 * fails. Interrupts which are in managed shutdown mode
1746 * will simply ignore that activation request.
1747 */
1748 ret = irq_activate(desc);
1749 if (ret)
1750 goto out_unlock;
1751
1752 desc->istate &= ~(IRQS_AUTODETECT | IRQS_SPURIOUS_DISABLED | \
1753 IRQS_ONESHOT | IRQS_WAITING);
1754 irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
1755
1756 if (new->flags & IRQF_PERCPU) {
1757 irqd_set(&desc->irq_data, IRQD_PER_CPU);
1758 irq_settings_set_per_cpu(desc);
1759 if (new->flags & IRQF_NO_DEBUG)
1760 irq_settings_set_no_debug(desc);
1761 }
1762
1763 if (noirqdebug)
1764 irq_settings_set_no_debug(desc);
1765
1766 if (new->flags & IRQF_ONESHOT)
1767 desc->istate |= IRQS_ONESHOT;
1768
1769 /* Exclude IRQ from balancing if requested */
1770 if (new->flags & IRQF_NOBALANCING) {
1771 irq_settings_set_no_balancing(desc);
1772 irqd_set(&desc->irq_data, IRQD_NO_BALANCING);
1773 }
1774
1775 if (!(new->flags & IRQF_NO_AUTOEN) &&
1776 irq_settings_can_autoenable(desc)) {
1777 irq_startup(desc, IRQ_RESEND, IRQ_START_COND);
1778 } else {
1779 /*
1780 * Shared interrupts do not go well with disabling
1781 * auto enable. The sharing interrupt might request
1782 * it while it's still disabled and then wait for
1783 * interrupts forever.
1784 */
1785 WARN_ON_ONCE(new->flags & IRQF_SHARED);
1786 /* Undo nested disables: */
1787 desc->depth = 1;
1788 }
1789
1790 } else if (new->flags & IRQF_TRIGGER_MASK) {
1791 unsigned int nmsk = new->flags & IRQF_TRIGGER_MASK;
1792 unsigned int omsk = irqd_get_trigger_type(&desc->irq_data);
1793
1794 if (nmsk != omsk)
1795 /* hope the handler works with current trigger mode */
1796 pr_warn("irq %d uses trigger mode %u; requested %u\n",
1797 irq, omsk, nmsk);
1798 }
1799
1800 *old_ptr = new;
1801
1802 irq_pm_install_action(desc, new);
1803
1804 /* Reset broken irq detection when installing new handler */
1805 desc->irq_count = 0;
1806 desc->irqs_unhandled = 0;
1807
1808 /*
1809 * Check whether we disabled the irq via the spurious handler
1810 * before. Reenable it and give it another chance.
1811 */
1812 if (shared && (desc->istate & IRQS_SPURIOUS_DISABLED)) {
1813 desc->istate &= ~IRQS_SPURIOUS_DISABLED;
1814 __enable_irq(desc);
1815 }
1816
1817 raw_spin_unlock_irqrestore(&desc->lock, flags);
1818 chip_bus_sync_unlock(desc);
1819 mutex_unlock(&desc->request_mutex);
1820
1821 irq_setup_timings(desc, new);
1822
1823 wake_up_and_wait_for_irq_thread_ready(desc, new);
1824 wake_up_and_wait_for_irq_thread_ready(desc, new->secondary);
1825
1826 register_irq_proc(irq, desc);
1827 new->dir = NULL;
1828 register_handler_proc(irq, new);
1829 return 0;
1830
1831mismatch:
1832 if (!(new->flags & IRQF_PROBE_SHARED)) {
1833 pr_err("Flags mismatch irq %d. %08x (%s) vs. %08x (%s)\n",
1834 irq, new->flags, new->name, old->flags, old->name);
1835#ifdef CONFIG_DEBUG_SHIRQ
1836 dump_stack();
1837#endif
1838 }
1839 ret = -EBUSY;
1840
1841out_unlock:
1842 raw_spin_unlock_irqrestore(&desc->lock, flags);
1843
1844 if (!desc->action)
1845 irq_release_resources(desc);
1846out_bus_unlock:
1847 chip_bus_sync_unlock(desc);
1848 mutex_unlock(&desc->request_mutex);
1849
1850out_thread:
1851 if (new->thread) {
1852 struct task_struct *t = new->thread;
1853
1854 new->thread = NULL;
1855 kthread_stop_put(t);
1856 }
1857 if (new->secondary && new->secondary->thread) {
1858 struct task_struct *t = new->secondary->thread;
1859
1860 new->secondary->thread = NULL;
1861 kthread_stop_put(t);
1862 }
1863out_mput:
1864 module_put(desc->owner);
1865 return ret;
1866}
1867
1868/*
1869 * Internal function to unregister an irqaction - used to free
1870 * regular and special interrupts that are part of the architecture.
1871 */
1872static struct irqaction *__free_irq(struct irq_desc *desc, void *dev_id)
1873{
1874 unsigned irq = desc->irq_data.irq;
1875 struct irqaction *action, **action_ptr;
1876 unsigned long flags;
1877
1878 WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
1879
1880 mutex_lock(&desc->request_mutex);
1881 chip_bus_lock(desc);
1882 raw_spin_lock_irqsave(&desc->lock, flags);
1883
1884 /*
1885 * There can be multiple actions per IRQ descriptor, find the right
1886 * one based on the dev_id:
1887 */
1888 action_ptr = &desc->action;
1889 for (;;) {
1890 action = *action_ptr;
1891
1892 if (!action) {
1893 WARN(1, "Trying to free already-free IRQ %d\n", irq);
1894 raw_spin_unlock_irqrestore(&desc->lock, flags);
1895 chip_bus_sync_unlock(desc);
1896 mutex_unlock(&desc->request_mutex);
1897 return NULL;
1898 }
1899
1900 if (action->dev_id == dev_id)
1901 break;
1902 action_ptr = &action->next;
1903 }
1904
1905 /* Found it - now remove it from the list of entries: */
1906 *action_ptr = action->next;
1907
1908 irq_pm_remove_action(desc, action);
1909
1910 /* If this was the last handler, shut down the IRQ line: */
1911 if (!desc->action) {
1912 irq_settings_clr_disable_unlazy(desc);
1913 /* Only shutdown. Deactivate after synchronize_hardirq() */
1914 irq_shutdown(desc);
1915 }
1916
1917#ifdef CONFIG_SMP
1918 /* make sure affinity_hint is cleaned up */
1919 if (WARN_ON_ONCE(desc->affinity_hint))
1920 desc->affinity_hint = NULL;
1921#endif
1922
1923 raw_spin_unlock_irqrestore(&desc->lock, flags);
1924 /*
1925 * Drop bus_lock here so the changes which were done in the chip
1926 * callbacks above are synced out to the irq chips which hang
1927 * behind a slow bus (I2C, SPI) before calling synchronize_hardirq().
1928 *
1929 * Aside of that the bus_lock can also be taken from the threaded
1930 * handler in irq_finalize_oneshot() which results in a deadlock
1931 * because kthread_stop() would wait forever for the thread to
1932 * complete, which is blocked on the bus lock.
1933 *
1934 * The still held desc->request_mutex() protects against a
1935 * concurrent request_irq() of this irq so the release of resources
1936 * and timing data is properly serialized.
1937 */
1938 chip_bus_sync_unlock(desc);
1939
1940 unregister_handler_proc(irq, action);
1941
1942 /*
1943 * Make sure it's not being used on another CPU and if the chip
1944 * supports it also make sure that there is no (not yet serviced)
1945 * interrupt in flight at the hardware level.
1946 */
1947 __synchronize_irq(desc);
1948
1949#ifdef CONFIG_DEBUG_SHIRQ
1950 /*
1951 * It's a shared IRQ -- the driver ought to be prepared for an IRQ
1952 * event to happen even now it's being freed, so let's make sure that
1953 * is so by doing an extra call to the handler ....
1954 *
1955 * ( We do this after actually deregistering it, to make sure that a
1956 * 'real' IRQ doesn't run in parallel with our fake. )
1957 */
1958 if (action->flags & IRQF_SHARED) {
1959 local_irq_save(flags);
1960 action->handler(irq, dev_id);
1961 local_irq_restore(flags);
1962 }
1963#endif
1964
1965 /*
1966 * The action has already been removed above, but the thread writes
1967 * its oneshot mask bit when it completes. Though request_mutex is
1968 * held across this which prevents __setup_irq() from handing out
1969 * the same bit to a newly requested action.
1970 */
1971 if (action->thread) {
1972 kthread_stop_put(action->thread);
1973 if (action->secondary && action->secondary->thread)
1974 kthread_stop_put(action->secondary->thread);
1975 }
1976
1977 /* Last action releases resources */
1978 if (!desc->action) {
1979 /*
1980 * Reacquire bus lock as irq_release_resources() might
1981 * require it to deallocate resources over the slow bus.
1982 */
1983 chip_bus_lock(desc);
1984 /*
1985 * There is no interrupt on the fly anymore. Deactivate it
1986 * completely.
1987 */
1988 raw_spin_lock_irqsave(&desc->lock, flags);
1989 irq_domain_deactivate_irq(&desc->irq_data);
1990 raw_spin_unlock_irqrestore(&desc->lock, flags);
1991
1992 irq_release_resources(desc);
1993 chip_bus_sync_unlock(desc);
1994 irq_remove_timings(desc);
1995 }
1996
1997 mutex_unlock(&desc->request_mutex);
1998
1999 irq_chip_pm_put(&desc->irq_data);
2000 module_put(desc->owner);
2001 kfree(action->secondary);
2002 return action;
2003}
2004
2005/**
2006 * free_irq - free an interrupt allocated with request_irq
2007 * @irq: Interrupt line to free
2008 * @dev_id: Device identity to free
2009 *
2010 * Remove an interrupt handler. The handler is removed and if the
2011 * interrupt line is no longer in use by any driver it is disabled.
2012 * On a shared IRQ the caller must ensure the interrupt is disabled
2013 * on the card it drives before calling this function. The function
2014 * does not return until any executing interrupts for this IRQ
2015 * have completed.
2016 *
2017 * This function must not be called from interrupt context.
2018 *
2019 * Returns the devname argument passed to request_irq.
2020 */
2021const void *free_irq(unsigned int irq, void *dev_id)
2022{
2023 struct irq_desc *desc = irq_to_desc(irq);
2024 struct irqaction *action;
2025 const char *devname;
2026
2027 if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
2028 return NULL;
2029
2030#ifdef CONFIG_SMP
2031 if (WARN_ON(desc->affinity_notify))
2032 desc->affinity_notify = NULL;
2033#endif
2034
2035 action = __free_irq(desc, dev_id);
2036
2037 if (!action)
2038 return NULL;
2039
2040 devname = action->name;
2041 kfree(action);
2042 return devname;
2043}
2044EXPORT_SYMBOL(free_irq);
2045
2046/* This function must be called with desc->lock held */
2047static const void *__cleanup_nmi(unsigned int irq, struct irq_desc *desc)
2048{
2049 const char *devname = NULL;
2050
2051 desc->istate &= ~IRQS_NMI;
2052
2053 if (!WARN_ON(desc->action == NULL)) {
2054 irq_pm_remove_action(desc, desc->action);
2055 devname = desc->action->name;
2056 unregister_handler_proc(irq, desc->action);
2057
2058 kfree(desc->action);
2059 desc->action = NULL;
2060 }
2061
2062 irq_settings_clr_disable_unlazy(desc);
2063 irq_shutdown_and_deactivate(desc);
2064
2065 irq_release_resources(desc);
2066
2067 irq_chip_pm_put(&desc->irq_data);
2068 module_put(desc->owner);
2069
2070 return devname;
2071}
2072
2073const void *free_nmi(unsigned int irq, void *dev_id)
2074{
2075 struct irq_desc *desc = irq_to_desc(irq);
2076 unsigned long flags;
2077 const void *devname;
2078
2079 if (!desc || WARN_ON(!(desc->istate & IRQS_NMI)))
2080 return NULL;
2081
2082 if (WARN_ON(irq_settings_is_per_cpu_devid(desc)))
2083 return NULL;
2084
2085 /* NMI still enabled */
2086 if (WARN_ON(desc->depth == 0))
2087 disable_nmi_nosync(irq);
2088
2089 raw_spin_lock_irqsave(&desc->lock, flags);
2090
2091 irq_nmi_teardown(desc);
2092 devname = __cleanup_nmi(irq, desc);
2093
2094 raw_spin_unlock_irqrestore(&desc->lock, flags);
2095
2096 return devname;
2097}
2098
2099/**
2100 * request_threaded_irq - allocate an interrupt line
2101 * @irq: Interrupt line to allocate
2102 * @handler: Function to be called when the IRQ occurs.
2103 * Primary handler for threaded interrupts.
2104 * If handler is NULL and thread_fn != NULL
2105 * the default primary handler is installed.
2106 * @thread_fn: Function called from the irq handler thread
2107 * If NULL, no irq thread is created
2108 * @irqflags: Interrupt type flags
2109 * @devname: An ascii name for the claiming device
2110 * @dev_id: A cookie passed back to the handler function
2111 *
2112 * This call allocates interrupt resources and enables the
2113 * interrupt line and IRQ handling. From the point this
2114 * call is made your handler function may be invoked. Since
2115 * your handler function must clear any interrupt the board
2116 * raises, you must take care both to initialise your hardware
2117 * and to set up the interrupt handler in the right order.
2118 *
2119 * If you want to set up a threaded irq handler for your device
2120 * then you need to supply @handler and @thread_fn. @handler is
2121 * still called in hard interrupt context and has to check
2122 * whether the interrupt originates from the device. If yes it
2123 * needs to disable the interrupt on the device and return
2124 * IRQ_WAKE_THREAD which will wake up the handler thread and run
2125 * @thread_fn. This split handler design is necessary to support
2126 * shared interrupts.
2127 *
2128 * Dev_id must be globally unique. Normally the address of the
2129 * device data structure is used as the cookie. Since the handler
2130 * receives this value it makes sense to use it.
2131 *
2132 * If your interrupt is shared you must pass a non NULL dev_id
2133 * as this is required when freeing the interrupt.
2134 *
2135 * Flags:
2136 *
2137 * IRQF_SHARED Interrupt is shared
2138 * IRQF_TRIGGER_* Specify active edge(s) or level
2139 * IRQF_ONESHOT Run thread_fn with interrupt line masked
2140 */
2141int request_threaded_irq(unsigned int irq, irq_handler_t handler,
2142 irq_handler_t thread_fn, unsigned long irqflags,
2143 const char *devname, void *dev_id)
2144{
2145 struct irqaction *action;
2146 struct irq_desc *desc;
2147 int retval;
2148
2149 if (irq == IRQ_NOTCONNECTED)
2150 return -ENOTCONN;
2151
2152 /*
2153 * Sanity-check: shared interrupts must pass in a real dev-ID,
2154 * otherwise we'll have trouble later trying to figure out
2155 * which interrupt is which (messes up the interrupt freeing
2156 * logic etc).
2157 *
2158 * Also shared interrupts do not go well with disabling auto enable.
2159 * The sharing interrupt might request it while it's still disabled
2160 * and then wait for interrupts forever.
2161 *
2162 * Also IRQF_COND_SUSPEND only makes sense for shared interrupts and
2163 * it cannot be set along with IRQF_NO_SUSPEND.
2164 */
2165 if (((irqflags & IRQF_SHARED) && !dev_id) ||
2166 ((irqflags & IRQF_SHARED) && (irqflags & IRQF_NO_AUTOEN)) ||
2167 (!(irqflags & IRQF_SHARED) && (irqflags & IRQF_COND_SUSPEND)) ||
2168 ((irqflags & IRQF_NO_SUSPEND) && (irqflags & IRQF_COND_SUSPEND)))
2169 return -EINVAL;
2170
2171 desc = irq_to_desc(irq);
2172 if (!desc)
2173 return -EINVAL;
2174
2175 if (!irq_settings_can_request(desc) ||
2176 WARN_ON(irq_settings_is_per_cpu_devid(desc)))
2177 return -EINVAL;
2178
2179 if (!handler) {
2180 if (!thread_fn)
2181 return -EINVAL;
2182 handler = irq_default_primary_handler;
2183 }
2184
2185 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2186 if (!action)
2187 return -ENOMEM;
2188
2189 action->handler = handler;
2190 action->thread_fn = thread_fn;
2191 action->flags = irqflags;
2192 action->name = devname;
2193 action->dev_id = dev_id;
2194
2195 retval = irq_chip_pm_get(&desc->irq_data);
2196 if (retval < 0) {
2197 kfree(action);
2198 return retval;
2199 }
2200
2201 retval = __setup_irq(irq, desc, action);
2202
2203 if (retval) {
2204 irq_chip_pm_put(&desc->irq_data);
2205 kfree(action->secondary);
2206 kfree(action);
2207 }
2208
2209#ifdef CONFIG_DEBUG_SHIRQ_FIXME
2210 if (!retval && (irqflags & IRQF_SHARED)) {
2211 /*
2212 * It's a shared IRQ -- the driver ought to be prepared for it
2213 * to happen immediately, so let's make sure....
2214 * We disable the irq to make sure that a 'real' IRQ doesn't
2215 * run in parallel with our fake.
2216 */
2217 unsigned long flags;
2218
2219 disable_irq(irq);
2220 local_irq_save(flags);
2221
2222 handler(irq, dev_id);
2223
2224 local_irq_restore(flags);
2225 enable_irq(irq);
2226 }
2227#endif
2228 return retval;
2229}
2230EXPORT_SYMBOL(request_threaded_irq);
2231
2232/**
2233 * request_any_context_irq - allocate an interrupt line
2234 * @irq: Interrupt line to allocate
2235 * @handler: Function to be called when the IRQ occurs.
2236 * Threaded handler for threaded interrupts.
2237 * @flags: Interrupt type flags
2238 * @name: An ascii name for the claiming device
2239 * @dev_id: A cookie passed back to the handler function
2240 *
2241 * This call allocates interrupt resources and enables the
2242 * interrupt line and IRQ handling. It selects either a
2243 * hardirq or threaded handling method depending on the
2244 * context.
2245 *
2246 * On failure, it returns a negative value. On success,
2247 * it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED.
2248 */
2249int request_any_context_irq(unsigned int irq, irq_handler_t handler,
2250 unsigned long flags, const char *name, void *dev_id)
2251{
2252 struct irq_desc *desc;
2253 int ret;
2254
2255 if (irq == IRQ_NOTCONNECTED)
2256 return -ENOTCONN;
2257
2258 desc = irq_to_desc(irq);
2259 if (!desc)
2260 return -EINVAL;
2261
2262 if (irq_settings_is_nested_thread(desc)) {
2263 ret = request_threaded_irq(irq, NULL, handler,
2264 flags, name, dev_id);
2265 return !ret ? IRQC_IS_NESTED : ret;
2266 }
2267
2268 ret = request_irq(irq, handler, flags, name, dev_id);
2269 return !ret ? IRQC_IS_HARDIRQ : ret;
2270}
2271EXPORT_SYMBOL_GPL(request_any_context_irq);
2272
2273/**
2274 * request_nmi - allocate an interrupt line for NMI delivery
2275 * @irq: Interrupt line to allocate
2276 * @handler: Function to be called when the IRQ occurs.
2277 * Threaded handler for threaded interrupts.
2278 * @irqflags: Interrupt type flags
2279 * @name: An ascii name for the claiming device
2280 * @dev_id: A cookie passed back to the handler function
2281 *
2282 * This call allocates interrupt resources and enables the
2283 * interrupt line and IRQ handling. It sets up the IRQ line
2284 * to be handled as an NMI.
2285 *
2286 * An interrupt line delivering NMIs cannot be shared and IRQ handling
2287 * cannot be threaded.
2288 *
2289 * Interrupt lines requested for NMI delivering must produce per cpu
2290 * interrupts and have auto enabling setting disabled.
2291 *
2292 * Dev_id must be globally unique. Normally the address of the
2293 * device data structure is used as the cookie. Since the handler
2294 * receives this value it makes sense to use it.
2295 *
2296 * If the interrupt line cannot be used to deliver NMIs, function
2297 * will fail and return a negative value.
2298 */
2299int request_nmi(unsigned int irq, irq_handler_t handler,
2300 unsigned long irqflags, const char *name, void *dev_id)
2301{
2302 struct irqaction *action;
2303 struct irq_desc *desc;
2304 unsigned long flags;
2305 int retval;
2306
2307 if (irq == IRQ_NOTCONNECTED)
2308 return -ENOTCONN;
2309
2310 /* NMI cannot be shared, used for Polling */
2311 if (irqflags & (IRQF_SHARED | IRQF_COND_SUSPEND | IRQF_IRQPOLL))
2312 return -EINVAL;
2313
2314 if (!(irqflags & IRQF_PERCPU))
2315 return -EINVAL;
2316
2317 if (!handler)
2318 return -EINVAL;
2319
2320 desc = irq_to_desc(irq);
2321
2322 if (!desc || (irq_settings_can_autoenable(desc) &&
2323 !(irqflags & IRQF_NO_AUTOEN)) ||
2324 !irq_settings_can_request(desc) ||
2325 WARN_ON(irq_settings_is_per_cpu_devid(desc)) ||
2326 !irq_supports_nmi(desc))
2327 return -EINVAL;
2328
2329 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2330 if (!action)
2331 return -ENOMEM;
2332
2333 action->handler = handler;
2334 action->flags = irqflags | IRQF_NO_THREAD | IRQF_NOBALANCING;
2335 action->name = name;
2336 action->dev_id = dev_id;
2337
2338 retval = irq_chip_pm_get(&desc->irq_data);
2339 if (retval < 0)
2340 goto err_out;
2341
2342 retval = __setup_irq(irq, desc, action);
2343 if (retval)
2344 goto err_irq_setup;
2345
2346 raw_spin_lock_irqsave(&desc->lock, flags);
2347
2348 /* Setup NMI state */
2349 desc->istate |= IRQS_NMI;
2350 retval = irq_nmi_setup(desc);
2351 if (retval) {
2352 __cleanup_nmi(irq, desc);
2353 raw_spin_unlock_irqrestore(&desc->lock, flags);
2354 return -EINVAL;
2355 }
2356
2357 raw_spin_unlock_irqrestore(&desc->lock, flags);
2358
2359 return 0;
2360
2361err_irq_setup:
2362 irq_chip_pm_put(&desc->irq_data);
2363err_out:
2364 kfree(action);
2365
2366 return retval;
2367}
2368
2369void enable_percpu_irq(unsigned int irq, unsigned int type)
2370{
2371 unsigned int cpu = smp_processor_id();
2372 unsigned long flags;
2373 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2374
2375 if (!desc)
2376 return;
2377
2378 /*
2379 * If the trigger type is not specified by the caller, then
2380 * use the default for this interrupt.
2381 */
2382 type &= IRQ_TYPE_SENSE_MASK;
2383 if (type == IRQ_TYPE_NONE)
2384 type = irqd_get_trigger_type(&desc->irq_data);
2385
2386 if (type != IRQ_TYPE_NONE) {
2387 int ret;
2388
2389 ret = __irq_set_trigger(desc, type);
2390
2391 if (ret) {
2392 WARN(1, "failed to set type for IRQ%d\n", irq);
2393 goto out;
2394 }
2395 }
2396
2397 irq_percpu_enable(desc, cpu);
2398out:
2399 irq_put_desc_unlock(desc, flags);
2400}
2401EXPORT_SYMBOL_GPL(enable_percpu_irq);
2402
2403void enable_percpu_nmi(unsigned int irq, unsigned int type)
2404{
2405 enable_percpu_irq(irq, type);
2406}
2407
2408/**
2409 * irq_percpu_is_enabled - Check whether the per cpu irq is enabled
2410 * @irq: Linux irq number to check for
2411 *
2412 * Must be called from a non migratable context. Returns the enable
2413 * state of a per cpu interrupt on the current cpu.
2414 */
2415bool irq_percpu_is_enabled(unsigned int irq)
2416{
2417 unsigned int cpu = smp_processor_id();
2418 struct irq_desc *desc;
2419 unsigned long flags;
2420 bool is_enabled;
2421
2422 desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2423 if (!desc)
2424 return false;
2425
2426 is_enabled = cpumask_test_cpu(cpu, desc->percpu_enabled);
2427 irq_put_desc_unlock(desc, flags);
2428
2429 return is_enabled;
2430}
2431EXPORT_SYMBOL_GPL(irq_percpu_is_enabled);
2432
2433void disable_percpu_irq(unsigned int irq)
2434{
2435 unsigned int cpu = smp_processor_id();
2436 unsigned long flags;
2437 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2438
2439 if (!desc)
2440 return;
2441
2442 irq_percpu_disable(desc, cpu);
2443 irq_put_desc_unlock(desc, flags);
2444}
2445EXPORT_SYMBOL_GPL(disable_percpu_irq);
2446
2447void disable_percpu_nmi(unsigned int irq)
2448{
2449 disable_percpu_irq(irq);
2450}
2451
2452/*
2453 * Internal function to unregister a percpu irqaction.
2454 */
2455static struct irqaction *__free_percpu_irq(unsigned int irq, void __percpu *dev_id)
2456{
2457 struct irq_desc *desc = irq_to_desc(irq);
2458 struct irqaction *action;
2459 unsigned long flags;
2460
2461 WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
2462
2463 if (!desc)
2464 return NULL;
2465
2466 raw_spin_lock_irqsave(&desc->lock, flags);
2467
2468 action = desc->action;
2469 if (!action || action->percpu_dev_id != dev_id) {
2470 WARN(1, "Trying to free already-free IRQ %d\n", irq);
2471 goto bad;
2472 }
2473
2474 if (!cpumask_empty(desc->percpu_enabled)) {
2475 WARN(1, "percpu IRQ %d still enabled on CPU%d!\n",
2476 irq, cpumask_first(desc->percpu_enabled));
2477 goto bad;
2478 }
2479
2480 /* Found it - now remove it from the list of entries: */
2481 desc->action = NULL;
2482
2483 desc->istate &= ~IRQS_NMI;
2484
2485 raw_spin_unlock_irqrestore(&desc->lock, flags);
2486
2487 unregister_handler_proc(irq, action);
2488
2489 irq_chip_pm_put(&desc->irq_data);
2490 module_put(desc->owner);
2491 return action;
2492
2493bad:
2494 raw_spin_unlock_irqrestore(&desc->lock, flags);
2495 return NULL;
2496}
2497
2498/**
2499 * remove_percpu_irq - free a per-cpu interrupt
2500 * @irq: Interrupt line to free
2501 * @act: irqaction for the interrupt
2502 *
2503 * Used to remove interrupts statically setup by the early boot process.
2504 */
2505void remove_percpu_irq(unsigned int irq, struct irqaction *act)
2506{
2507 struct irq_desc *desc = irq_to_desc(irq);
2508
2509 if (desc && irq_settings_is_per_cpu_devid(desc))
2510 __free_percpu_irq(irq, act->percpu_dev_id);
2511}
2512
2513/**
2514 * free_percpu_irq - free an interrupt allocated with request_percpu_irq
2515 * @irq: Interrupt line to free
2516 * @dev_id: Device identity to free
2517 *
2518 * Remove a percpu interrupt handler. The handler is removed, but
2519 * the interrupt line is not disabled. This must be done on each
2520 * CPU before calling this function. The function does not return
2521 * until any executing interrupts for this IRQ have completed.
2522 *
2523 * This function must not be called from interrupt context.
2524 */
2525void free_percpu_irq(unsigned int irq, void __percpu *dev_id)
2526{
2527 struct irq_desc *desc = irq_to_desc(irq);
2528
2529 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2530 return;
2531
2532 chip_bus_lock(desc);
2533 kfree(__free_percpu_irq(irq, dev_id));
2534 chip_bus_sync_unlock(desc);
2535}
2536EXPORT_SYMBOL_GPL(free_percpu_irq);
2537
2538void free_percpu_nmi(unsigned int irq, void __percpu *dev_id)
2539{
2540 struct irq_desc *desc = irq_to_desc(irq);
2541
2542 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2543 return;
2544
2545 if (WARN_ON(!(desc->istate & IRQS_NMI)))
2546 return;
2547
2548 kfree(__free_percpu_irq(irq, dev_id));
2549}
2550
2551/**
2552 * setup_percpu_irq - setup a per-cpu interrupt
2553 * @irq: Interrupt line to setup
2554 * @act: irqaction for the interrupt
2555 *
2556 * Used to statically setup per-cpu interrupts in the early boot process.
2557 */
2558int setup_percpu_irq(unsigned int irq, struct irqaction *act)
2559{
2560 struct irq_desc *desc = irq_to_desc(irq);
2561 int retval;
2562
2563 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2564 return -EINVAL;
2565
2566 retval = irq_chip_pm_get(&desc->irq_data);
2567 if (retval < 0)
2568 return retval;
2569
2570 retval = __setup_irq(irq, desc, act);
2571
2572 if (retval)
2573 irq_chip_pm_put(&desc->irq_data);
2574
2575 return retval;
2576}
2577
2578/**
2579 * __request_percpu_irq - allocate a percpu interrupt line
2580 * @irq: Interrupt line to allocate
2581 * @handler: Function to be called when the IRQ occurs.
2582 * @flags: Interrupt type flags (IRQF_TIMER only)
2583 * @devname: An ascii name for the claiming device
2584 * @dev_id: A percpu cookie passed back to the handler function
2585 *
2586 * This call allocates interrupt resources and enables the
2587 * interrupt on the local CPU. If the interrupt is supposed to be
2588 * enabled on other CPUs, it has to be done on each CPU using
2589 * enable_percpu_irq().
2590 *
2591 * Dev_id must be globally unique. It is a per-cpu variable, and
2592 * the handler gets called with the interrupted CPU's instance of
2593 * that variable.
2594 */
2595int __request_percpu_irq(unsigned int irq, irq_handler_t handler,
2596 unsigned long flags, const char *devname,
2597 void __percpu *dev_id)
2598{
2599 struct irqaction *action;
2600 struct irq_desc *desc;
2601 int retval;
2602
2603 if (!dev_id)
2604 return -EINVAL;
2605
2606 desc = irq_to_desc(irq);
2607 if (!desc || !irq_settings_can_request(desc) ||
2608 !irq_settings_is_per_cpu_devid(desc))
2609 return -EINVAL;
2610
2611 if (flags && flags != IRQF_TIMER)
2612 return -EINVAL;
2613
2614 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2615 if (!action)
2616 return -ENOMEM;
2617
2618 action->handler = handler;
2619 action->flags = flags | IRQF_PERCPU | IRQF_NO_SUSPEND;
2620 action->name = devname;
2621 action->percpu_dev_id = dev_id;
2622
2623 retval = irq_chip_pm_get(&desc->irq_data);
2624 if (retval < 0) {
2625 kfree(action);
2626 return retval;
2627 }
2628
2629 retval = __setup_irq(irq, desc, action);
2630
2631 if (retval) {
2632 irq_chip_pm_put(&desc->irq_data);
2633 kfree(action);
2634 }
2635
2636 return retval;
2637}
2638EXPORT_SYMBOL_GPL(__request_percpu_irq);
2639
2640/**
2641 * request_percpu_nmi - allocate a percpu interrupt line for NMI delivery
2642 * @irq: Interrupt line to allocate
2643 * @handler: Function to be called when the IRQ occurs.
2644 * @name: An ascii name for the claiming device
2645 * @dev_id: A percpu cookie passed back to the handler function
2646 *
2647 * This call allocates interrupt resources for a per CPU NMI. Per CPU NMIs
2648 * have to be setup on each CPU by calling prepare_percpu_nmi() before
2649 * being enabled on the same CPU by using enable_percpu_nmi().
2650 *
2651 * Dev_id must be globally unique. It is a per-cpu variable, and
2652 * the handler gets called with the interrupted CPU's instance of
2653 * that variable.
2654 *
2655 * Interrupt lines requested for NMI delivering should have auto enabling
2656 * setting disabled.
2657 *
2658 * If the interrupt line cannot be used to deliver NMIs, function
2659 * will fail returning a negative value.
2660 */
2661int request_percpu_nmi(unsigned int irq, irq_handler_t handler,
2662 const char *name, void __percpu *dev_id)
2663{
2664 struct irqaction *action;
2665 struct irq_desc *desc;
2666 unsigned long flags;
2667 int retval;
2668
2669 if (!handler)
2670 return -EINVAL;
2671
2672 desc = irq_to_desc(irq);
2673
2674 if (!desc || !irq_settings_can_request(desc) ||
2675 !irq_settings_is_per_cpu_devid(desc) ||
2676 irq_settings_can_autoenable(desc) ||
2677 !irq_supports_nmi(desc))
2678 return -EINVAL;
2679
2680 /* The line cannot already be NMI */
2681 if (desc->istate & IRQS_NMI)
2682 return -EINVAL;
2683
2684 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2685 if (!action)
2686 return -ENOMEM;
2687
2688 action->handler = handler;
2689 action->flags = IRQF_PERCPU | IRQF_NO_SUSPEND | IRQF_NO_THREAD
2690 | IRQF_NOBALANCING;
2691 action->name = name;
2692 action->percpu_dev_id = dev_id;
2693
2694 retval = irq_chip_pm_get(&desc->irq_data);
2695 if (retval < 0)
2696 goto err_out;
2697
2698 retval = __setup_irq(irq, desc, action);
2699 if (retval)
2700 goto err_irq_setup;
2701
2702 raw_spin_lock_irqsave(&desc->lock, flags);
2703 desc->istate |= IRQS_NMI;
2704 raw_spin_unlock_irqrestore(&desc->lock, flags);
2705
2706 return 0;
2707
2708err_irq_setup:
2709 irq_chip_pm_put(&desc->irq_data);
2710err_out:
2711 kfree(action);
2712
2713 return retval;
2714}
2715
2716/**
2717 * prepare_percpu_nmi - performs CPU local setup for NMI delivery
2718 * @irq: Interrupt line to prepare for NMI delivery
2719 *
2720 * This call prepares an interrupt line to deliver NMI on the current CPU,
2721 * before that interrupt line gets enabled with enable_percpu_nmi().
2722 *
2723 * As a CPU local operation, this should be called from non-preemptible
2724 * context.
2725 *
2726 * If the interrupt line cannot be used to deliver NMIs, function
2727 * will fail returning a negative value.
2728 */
2729int prepare_percpu_nmi(unsigned int irq)
2730{
2731 unsigned long flags;
2732 struct irq_desc *desc;
2733 int ret = 0;
2734
2735 WARN_ON(preemptible());
2736
2737 desc = irq_get_desc_lock(irq, &flags,
2738 IRQ_GET_DESC_CHECK_PERCPU);
2739 if (!desc)
2740 return -EINVAL;
2741
2742 if (WARN(!(desc->istate & IRQS_NMI),
2743 KERN_ERR "prepare_percpu_nmi called for a non-NMI interrupt: irq %u\n",
2744 irq)) {
2745 ret = -EINVAL;
2746 goto out;
2747 }
2748
2749 ret = irq_nmi_setup(desc);
2750 if (ret) {
2751 pr_err("Failed to setup NMI delivery: irq %u\n", irq);
2752 goto out;
2753 }
2754
2755out:
2756 irq_put_desc_unlock(desc, flags);
2757 return ret;
2758}
2759
2760/**
2761 * teardown_percpu_nmi - undoes NMI setup of IRQ line
2762 * @irq: Interrupt line from which CPU local NMI configuration should be
2763 * removed
2764 *
2765 * This call undoes the setup done by prepare_percpu_nmi().
2766 *
2767 * IRQ line should not be enabled for the current CPU.
2768 *
2769 * As a CPU local operation, this should be called from non-preemptible
2770 * context.
2771 */
2772void teardown_percpu_nmi(unsigned int irq)
2773{
2774 unsigned long flags;
2775 struct irq_desc *desc;
2776
2777 WARN_ON(preemptible());
2778
2779 desc = irq_get_desc_lock(irq, &flags,
2780 IRQ_GET_DESC_CHECK_PERCPU);
2781 if (!desc)
2782 return;
2783
2784 if (WARN_ON(!(desc->istate & IRQS_NMI)))
2785 goto out;
2786
2787 irq_nmi_teardown(desc);
2788out:
2789 irq_put_desc_unlock(desc, flags);
2790}
2791
2792int __irq_get_irqchip_state(struct irq_data *data, enum irqchip_irq_state which,
2793 bool *state)
2794{
2795 struct irq_chip *chip;
2796 int err = -EINVAL;
2797
2798 do {
2799 chip = irq_data_get_irq_chip(data);
2800 if (WARN_ON_ONCE(!chip))
2801 return -ENODEV;
2802 if (chip->irq_get_irqchip_state)
2803 break;
2804#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2805 data = data->parent_data;
2806#else
2807 data = NULL;
2808#endif
2809 } while (data);
2810
2811 if (data)
2812 err = chip->irq_get_irqchip_state(data, which, state);
2813 return err;
2814}
2815
2816/**
2817 * irq_get_irqchip_state - returns the irqchip state of a interrupt.
2818 * @irq: Interrupt line that is forwarded to a VM
2819 * @which: One of IRQCHIP_STATE_* the caller wants to know about
2820 * @state: a pointer to a boolean where the state is to be stored
2821 *
2822 * This call snapshots the internal irqchip state of an
2823 * interrupt, returning into @state the bit corresponding to
2824 * stage @which
2825 *
2826 * This function should be called with preemption disabled if the
2827 * interrupt controller has per-cpu registers.
2828 */
2829int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2830 bool *state)
2831{
2832 struct irq_desc *desc;
2833 struct irq_data *data;
2834 unsigned long flags;
2835 int err = -EINVAL;
2836
2837 desc = irq_get_desc_buslock(irq, &flags, 0);
2838 if (!desc)
2839 return err;
2840
2841 data = irq_desc_get_irq_data(desc);
2842
2843 err = __irq_get_irqchip_state(data, which, state);
2844
2845 irq_put_desc_busunlock(desc, flags);
2846 return err;
2847}
2848EXPORT_SYMBOL_GPL(irq_get_irqchip_state);
2849
2850/**
2851 * irq_set_irqchip_state - set the state of a forwarded interrupt.
2852 * @irq: Interrupt line that is forwarded to a VM
2853 * @which: State to be restored (one of IRQCHIP_STATE_*)
2854 * @val: Value corresponding to @which
2855 *
2856 * This call sets the internal irqchip state of an interrupt,
2857 * depending on the value of @which.
2858 *
2859 * This function should be called with migration disabled if the
2860 * interrupt controller has per-cpu registers.
2861 */
2862int irq_set_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2863 bool val)
2864{
2865 struct irq_desc *desc;
2866 struct irq_data *data;
2867 struct irq_chip *chip;
2868 unsigned long flags;
2869 int err = -EINVAL;
2870
2871 desc = irq_get_desc_buslock(irq, &flags, 0);
2872 if (!desc)
2873 return err;
2874
2875 data = irq_desc_get_irq_data(desc);
2876
2877 do {
2878 chip = irq_data_get_irq_chip(data);
2879 if (WARN_ON_ONCE(!chip)) {
2880 err = -ENODEV;
2881 goto out_unlock;
2882 }
2883 if (chip->irq_set_irqchip_state)
2884 break;
2885#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2886 data = data->parent_data;
2887#else
2888 data = NULL;
2889#endif
2890 } while (data);
2891
2892 if (data)
2893 err = chip->irq_set_irqchip_state(data, which, val);
2894
2895out_unlock:
2896 irq_put_desc_busunlock(desc, flags);
2897 return err;
2898}
2899EXPORT_SYMBOL_GPL(irq_set_irqchip_state);
2900
2901/**
2902 * irq_has_action - Check whether an interrupt is requested
2903 * @irq: The linux irq number
2904 *
2905 * Returns: A snapshot of the current state
2906 */
2907bool irq_has_action(unsigned int irq)
2908{
2909 bool res;
2910
2911 rcu_read_lock();
2912 res = irq_desc_has_action(irq_to_desc(irq));
2913 rcu_read_unlock();
2914 return res;
2915}
2916EXPORT_SYMBOL_GPL(irq_has_action);
2917
2918/**
2919 * irq_check_status_bit - Check whether bits in the irq descriptor status are set
2920 * @irq: The linux irq number
2921 * @bitmask: The bitmask to evaluate
2922 *
2923 * Returns: True if one of the bits in @bitmask is set
2924 */
2925bool irq_check_status_bit(unsigned int irq, unsigned int bitmask)
2926{
2927 struct irq_desc *desc;
2928 bool res = false;
2929
2930 rcu_read_lock();
2931 desc = irq_to_desc(irq);
2932 if (desc)
2933 res = !!(desc->status_use_accessors & bitmask);
2934 rcu_read_unlock();
2935 return res;
2936}
2937EXPORT_SYMBOL_GPL(irq_check_status_bit);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
4 * Copyright (C) 2005-2006 Thomas Gleixner
5 *
6 * This file contains driver APIs to the irq subsystem.
7 */
8
9#define pr_fmt(fmt) "genirq: " fmt
10
11#include <linux/irq.h>
12#include <linux/kthread.h>
13#include <linux/module.h>
14#include <linux/random.h>
15#include <linux/interrupt.h>
16#include <linux/irqdomain.h>
17#include <linux/slab.h>
18#include <linux/sched.h>
19#include <linux/sched/rt.h>
20#include <linux/sched/task.h>
21#include <linux/sched/isolation.h>
22#include <uapi/linux/sched/types.h>
23#include <linux/task_work.h>
24
25#include "internals.h"
26
27#if defined(CONFIG_IRQ_FORCED_THREADING) && !defined(CONFIG_PREEMPT_RT)
28__read_mostly bool force_irqthreads;
29EXPORT_SYMBOL_GPL(force_irqthreads);
30
31static int __init setup_forced_irqthreads(char *arg)
32{
33 force_irqthreads = true;
34 return 0;
35}
36early_param("threadirqs", setup_forced_irqthreads);
37#endif
38
39static void __synchronize_hardirq(struct irq_desc *desc, bool sync_chip)
40{
41 struct irq_data *irqd = irq_desc_get_irq_data(desc);
42 bool inprogress;
43
44 do {
45 unsigned long flags;
46
47 /*
48 * Wait until we're out of the critical section. This might
49 * give the wrong answer due to the lack of memory barriers.
50 */
51 while (irqd_irq_inprogress(&desc->irq_data))
52 cpu_relax();
53
54 /* Ok, that indicated we're done: double-check carefully. */
55 raw_spin_lock_irqsave(&desc->lock, flags);
56 inprogress = irqd_irq_inprogress(&desc->irq_data);
57
58 /*
59 * If requested and supported, check at the chip whether it
60 * is in flight at the hardware level, i.e. already pending
61 * in a CPU and waiting for service and acknowledge.
62 */
63 if (!inprogress && sync_chip) {
64 /*
65 * Ignore the return code. inprogress is only updated
66 * when the chip supports it.
67 */
68 __irq_get_irqchip_state(irqd, IRQCHIP_STATE_ACTIVE,
69 &inprogress);
70 }
71 raw_spin_unlock_irqrestore(&desc->lock, flags);
72
73 /* Oops, that failed? */
74 } while (inprogress);
75}
76
77/**
78 * synchronize_hardirq - wait for pending hard IRQ handlers (on other CPUs)
79 * @irq: interrupt number to wait for
80 *
81 * This function waits for any pending hard IRQ handlers for this
82 * interrupt to complete before returning. If you use this
83 * function while holding a resource the IRQ handler may need you
84 * will deadlock. It does not take associated threaded handlers
85 * into account.
86 *
87 * Do not use this for shutdown scenarios where you must be sure
88 * that all parts (hardirq and threaded handler) have completed.
89 *
90 * Returns: false if a threaded handler is active.
91 *
92 * This function may be called - with care - from IRQ context.
93 *
94 * It does not check whether there is an interrupt in flight at the
95 * hardware level, but not serviced yet, as this might deadlock when
96 * called with interrupts disabled and the target CPU of the interrupt
97 * is the current CPU.
98 */
99bool synchronize_hardirq(unsigned int irq)
100{
101 struct irq_desc *desc = irq_to_desc(irq);
102
103 if (desc) {
104 __synchronize_hardirq(desc, false);
105 return !atomic_read(&desc->threads_active);
106 }
107
108 return true;
109}
110EXPORT_SYMBOL(synchronize_hardirq);
111
112/**
113 * synchronize_irq - wait for pending IRQ handlers (on other CPUs)
114 * @irq: interrupt number to wait for
115 *
116 * This function waits for any pending IRQ handlers for this interrupt
117 * to complete before returning. If you use this function while
118 * holding a resource the IRQ handler may need you will deadlock.
119 *
120 * Can only be called from preemptible code as it might sleep when
121 * an interrupt thread is associated to @irq.
122 *
123 * It optionally makes sure (when the irq chip supports that method)
124 * that the interrupt is not pending in any CPU and waiting for
125 * service.
126 */
127void synchronize_irq(unsigned int irq)
128{
129 struct irq_desc *desc = irq_to_desc(irq);
130
131 if (desc) {
132 __synchronize_hardirq(desc, true);
133 /*
134 * We made sure that no hardirq handler is
135 * running. Now verify that no threaded handlers are
136 * active.
137 */
138 wait_event(desc->wait_for_threads,
139 !atomic_read(&desc->threads_active));
140 }
141}
142EXPORT_SYMBOL(synchronize_irq);
143
144#ifdef CONFIG_SMP
145cpumask_var_t irq_default_affinity;
146
147static bool __irq_can_set_affinity(struct irq_desc *desc)
148{
149 if (!desc || !irqd_can_balance(&desc->irq_data) ||
150 !desc->irq_data.chip || !desc->irq_data.chip->irq_set_affinity)
151 return false;
152 return true;
153}
154
155/**
156 * irq_can_set_affinity - Check if the affinity of a given irq can be set
157 * @irq: Interrupt to check
158 *
159 */
160int irq_can_set_affinity(unsigned int irq)
161{
162 return __irq_can_set_affinity(irq_to_desc(irq));
163}
164
165/**
166 * irq_can_set_affinity_usr - Check if affinity of a irq can be set from user space
167 * @irq: Interrupt to check
168 *
169 * Like irq_can_set_affinity() above, but additionally checks for the
170 * AFFINITY_MANAGED flag.
171 */
172bool irq_can_set_affinity_usr(unsigned int irq)
173{
174 struct irq_desc *desc = irq_to_desc(irq);
175
176 return __irq_can_set_affinity(desc) &&
177 !irqd_affinity_is_managed(&desc->irq_data);
178}
179
180/**
181 * irq_set_thread_affinity - Notify irq threads to adjust affinity
182 * @desc: irq descriptor which has affinity changed
183 *
184 * We just set IRQTF_AFFINITY and delegate the affinity setting
185 * to the interrupt thread itself. We can not call
186 * set_cpus_allowed_ptr() here as we hold desc->lock and this
187 * code can be called from hard interrupt context.
188 */
189void irq_set_thread_affinity(struct irq_desc *desc)
190{
191 struct irqaction *action;
192
193 for_each_action_of_desc(desc, action)
194 if (action->thread)
195 set_bit(IRQTF_AFFINITY, &action->thread_flags);
196}
197
198#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK
199static void irq_validate_effective_affinity(struct irq_data *data)
200{
201 const struct cpumask *m = irq_data_get_effective_affinity_mask(data);
202 struct irq_chip *chip = irq_data_get_irq_chip(data);
203
204 if (!cpumask_empty(m))
205 return;
206 pr_warn_once("irq_chip %s did not update eff. affinity mask of irq %u\n",
207 chip->name, data->irq);
208}
209
210static inline void irq_init_effective_affinity(struct irq_data *data,
211 const struct cpumask *mask)
212{
213 cpumask_copy(irq_data_get_effective_affinity_mask(data), mask);
214}
215#else
216static inline void irq_validate_effective_affinity(struct irq_data *data) { }
217static inline void irq_init_effective_affinity(struct irq_data *data,
218 const struct cpumask *mask) { }
219#endif
220
221int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask,
222 bool force)
223{
224 struct irq_desc *desc = irq_data_to_desc(data);
225 struct irq_chip *chip = irq_data_get_irq_chip(data);
226 int ret;
227
228 if (!chip || !chip->irq_set_affinity)
229 return -EINVAL;
230
231 /*
232 * If this is a managed interrupt and housekeeping is enabled on
233 * it check whether the requested affinity mask intersects with
234 * a housekeeping CPU. If so, then remove the isolated CPUs from
235 * the mask and just keep the housekeeping CPU(s). This prevents
236 * the affinity setter from routing the interrupt to an isolated
237 * CPU to avoid that I/O submitted from a housekeeping CPU causes
238 * interrupts on an isolated one.
239 *
240 * If the masks do not intersect or include online CPU(s) then
241 * keep the requested mask. The isolated target CPUs are only
242 * receiving interrupts when the I/O operation was submitted
243 * directly from them.
244 *
245 * If all housekeeping CPUs in the affinity mask are offline, the
246 * interrupt will be migrated by the CPU hotplug code once a
247 * housekeeping CPU which belongs to the affinity mask comes
248 * online.
249 */
250 if (irqd_affinity_is_managed(data) &&
251 housekeeping_enabled(HK_FLAG_MANAGED_IRQ)) {
252 const struct cpumask *hk_mask, *prog_mask;
253
254 static DEFINE_RAW_SPINLOCK(tmp_mask_lock);
255 static struct cpumask tmp_mask;
256
257 hk_mask = housekeeping_cpumask(HK_FLAG_MANAGED_IRQ);
258
259 raw_spin_lock(&tmp_mask_lock);
260 cpumask_and(&tmp_mask, mask, hk_mask);
261 if (!cpumask_intersects(&tmp_mask, cpu_online_mask))
262 prog_mask = mask;
263 else
264 prog_mask = &tmp_mask;
265 ret = chip->irq_set_affinity(data, prog_mask, force);
266 raw_spin_unlock(&tmp_mask_lock);
267 } else {
268 ret = chip->irq_set_affinity(data, mask, force);
269 }
270 switch (ret) {
271 case IRQ_SET_MASK_OK:
272 case IRQ_SET_MASK_OK_DONE:
273 cpumask_copy(desc->irq_common_data.affinity, mask);
274 fallthrough;
275 case IRQ_SET_MASK_OK_NOCOPY:
276 irq_validate_effective_affinity(data);
277 irq_set_thread_affinity(desc);
278 ret = 0;
279 }
280
281 return ret;
282}
283
284#ifdef CONFIG_GENERIC_PENDING_IRQ
285static inline int irq_set_affinity_pending(struct irq_data *data,
286 const struct cpumask *dest)
287{
288 struct irq_desc *desc = irq_data_to_desc(data);
289
290 irqd_set_move_pending(data);
291 irq_copy_pending(desc, dest);
292 return 0;
293}
294#else
295static inline int irq_set_affinity_pending(struct irq_data *data,
296 const struct cpumask *dest)
297{
298 return -EBUSY;
299}
300#endif
301
302static int irq_try_set_affinity(struct irq_data *data,
303 const struct cpumask *dest, bool force)
304{
305 int ret = irq_do_set_affinity(data, dest, force);
306
307 /*
308 * In case that the underlying vector management is busy and the
309 * architecture supports the generic pending mechanism then utilize
310 * this to avoid returning an error to user space.
311 */
312 if (ret == -EBUSY && !force)
313 ret = irq_set_affinity_pending(data, dest);
314 return ret;
315}
316
317static bool irq_set_affinity_deactivated(struct irq_data *data,
318 const struct cpumask *mask, bool force)
319{
320 struct irq_desc *desc = irq_data_to_desc(data);
321
322 /*
323 * Handle irq chips which can handle affinity only in activated
324 * state correctly
325 *
326 * If the interrupt is not yet activated, just store the affinity
327 * mask and do not call the chip driver at all. On activation the
328 * driver has to make sure anyway that the interrupt is in a
329 * usable state so startup works.
330 */
331 if (!IS_ENABLED(CONFIG_IRQ_DOMAIN_HIERARCHY) ||
332 irqd_is_activated(data) || !irqd_affinity_on_activate(data))
333 return false;
334
335 cpumask_copy(desc->irq_common_data.affinity, mask);
336 irq_init_effective_affinity(data, mask);
337 irqd_set(data, IRQD_AFFINITY_SET);
338 return true;
339}
340
341int irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask,
342 bool force)
343{
344 struct irq_chip *chip = irq_data_get_irq_chip(data);
345 struct irq_desc *desc = irq_data_to_desc(data);
346 int ret = 0;
347
348 if (!chip || !chip->irq_set_affinity)
349 return -EINVAL;
350
351 if (irq_set_affinity_deactivated(data, mask, force))
352 return 0;
353
354 if (irq_can_move_pcntxt(data) && !irqd_is_setaffinity_pending(data)) {
355 ret = irq_try_set_affinity(data, mask, force);
356 } else {
357 irqd_set_move_pending(data);
358 irq_copy_pending(desc, mask);
359 }
360
361 if (desc->affinity_notify) {
362 kref_get(&desc->affinity_notify->kref);
363 if (!schedule_work(&desc->affinity_notify->work)) {
364 /* Work was already scheduled, drop our extra ref */
365 kref_put(&desc->affinity_notify->kref,
366 desc->affinity_notify->release);
367 }
368 }
369 irqd_set(data, IRQD_AFFINITY_SET);
370
371 return ret;
372}
373
374/**
375 * irq_update_affinity_desc - Update affinity management for an interrupt
376 * @irq: The interrupt number to update
377 * @affinity: Pointer to the affinity descriptor
378 *
379 * This interface can be used to configure the affinity management of
380 * interrupts which have been allocated already.
381 *
382 * There are certain limitations on when it may be used - attempts to use it
383 * for when the kernel is configured for generic IRQ reservation mode (in
384 * config GENERIC_IRQ_RESERVATION_MODE) will fail, as it may conflict with
385 * managed/non-managed interrupt accounting. In addition, attempts to use it on
386 * an interrupt which is already started or which has already been configured
387 * as managed will also fail, as these mean invalid init state or double init.
388 */
389int irq_update_affinity_desc(unsigned int irq,
390 struct irq_affinity_desc *affinity)
391{
392 struct irq_desc *desc;
393 unsigned long flags;
394 bool activated;
395 int ret = 0;
396
397 /*
398 * Supporting this with the reservation scheme used by x86 needs
399 * some more thought. Fail it for now.
400 */
401 if (IS_ENABLED(CONFIG_GENERIC_IRQ_RESERVATION_MODE))
402 return -EOPNOTSUPP;
403
404 desc = irq_get_desc_buslock(irq, &flags, 0);
405 if (!desc)
406 return -EINVAL;
407
408 /* Requires the interrupt to be shut down */
409 if (irqd_is_started(&desc->irq_data)) {
410 ret = -EBUSY;
411 goto out_unlock;
412 }
413
414 /* Interrupts which are already managed cannot be modified */
415 if (irqd_affinity_is_managed(&desc->irq_data)) {
416 ret = -EBUSY;
417 goto out_unlock;
418 }
419
420 /*
421 * Deactivate the interrupt. That's required to undo
422 * anything an earlier activation has established.
423 */
424 activated = irqd_is_activated(&desc->irq_data);
425 if (activated)
426 irq_domain_deactivate_irq(&desc->irq_data);
427
428 if (affinity->is_managed) {
429 irqd_set(&desc->irq_data, IRQD_AFFINITY_MANAGED);
430 irqd_set(&desc->irq_data, IRQD_MANAGED_SHUTDOWN);
431 }
432
433 cpumask_copy(desc->irq_common_data.affinity, &affinity->mask);
434
435 /* Restore the activation state */
436 if (activated)
437 irq_domain_activate_irq(&desc->irq_data, false);
438
439out_unlock:
440 irq_put_desc_busunlock(desc, flags);
441 return ret;
442}
443
444static int __irq_set_affinity(unsigned int irq, const struct cpumask *mask,
445 bool force)
446{
447 struct irq_desc *desc = irq_to_desc(irq);
448 unsigned long flags;
449 int ret;
450
451 if (!desc)
452 return -EINVAL;
453
454 raw_spin_lock_irqsave(&desc->lock, flags);
455 ret = irq_set_affinity_locked(irq_desc_get_irq_data(desc), mask, force);
456 raw_spin_unlock_irqrestore(&desc->lock, flags);
457 return ret;
458}
459
460/**
461 * irq_set_affinity - Set the irq affinity of a given irq
462 * @irq: Interrupt to set affinity
463 * @cpumask: cpumask
464 *
465 * Fails if cpumask does not contain an online CPU
466 */
467int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask)
468{
469 return __irq_set_affinity(irq, cpumask, false);
470}
471EXPORT_SYMBOL_GPL(irq_set_affinity);
472
473/**
474 * irq_force_affinity - Force the irq affinity of a given irq
475 * @irq: Interrupt to set affinity
476 * @cpumask: cpumask
477 *
478 * Same as irq_set_affinity, but without checking the mask against
479 * online cpus.
480 *
481 * Solely for low level cpu hotplug code, where we need to make per
482 * cpu interrupts affine before the cpu becomes online.
483 */
484int irq_force_affinity(unsigned int irq, const struct cpumask *cpumask)
485{
486 return __irq_set_affinity(irq, cpumask, true);
487}
488EXPORT_SYMBOL_GPL(irq_force_affinity);
489
490int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m)
491{
492 unsigned long flags;
493 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
494
495 if (!desc)
496 return -EINVAL;
497 desc->affinity_hint = m;
498 irq_put_desc_unlock(desc, flags);
499 /* set the initial affinity to prevent every interrupt being on CPU0 */
500 if (m)
501 __irq_set_affinity(irq, m, false);
502 return 0;
503}
504EXPORT_SYMBOL_GPL(irq_set_affinity_hint);
505
506static void irq_affinity_notify(struct work_struct *work)
507{
508 struct irq_affinity_notify *notify =
509 container_of(work, struct irq_affinity_notify, work);
510 struct irq_desc *desc = irq_to_desc(notify->irq);
511 cpumask_var_t cpumask;
512 unsigned long flags;
513
514 if (!desc || !alloc_cpumask_var(&cpumask, GFP_KERNEL))
515 goto out;
516
517 raw_spin_lock_irqsave(&desc->lock, flags);
518 if (irq_move_pending(&desc->irq_data))
519 irq_get_pending(cpumask, desc);
520 else
521 cpumask_copy(cpumask, desc->irq_common_data.affinity);
522 raw_spin_unlock_irqrestore(&desc->lock, flags);
523
524 notify->notify(notify, cpumask);
525
526 free_cpumask_var(cpumask);
527out:
528 kref_put(¬ify->kref, notify->release);
529}
530
531/**
532 * irq_set_affinity_notifier - control notification of IRQ affinity changes
533 * @irq: Interrupt for which to enable/disable notification
534 * @notify: Context for notification, or %NULL to disable
535 * notification. Function pointers must be initialised;
536 * the other fields will be initialised by this function.
537 *
538 * Must be called in process context. Notification may only be enabled
539 * after the IRQ is allocated and must be disabled before the IRQ is
540 * freed using free_irq().
541 */
542int
543irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify)
544{
545 struct irq_desc *desc = irq_to_desc(irq);
546 struct irq_affinity_notify *old_notify;
547 unsigned long flags;
548
549 /* The release function is promised process context */
550 might_sleep();
551
552 if (!desc || desc->istate & IRQS_NMI)
553 return -EINVAL;
554
555 /* Complete initialisation of *notify */
556 if (notify) {
557 notify->irq = irq;
558 kref_init(¬ify->kref);
559 INIT_WORK(¬ify->work, irq_affinity_notify);
560 }
561
562 raw_spin_lock_irqsave(&desc->lock, flags);
563 old_notify = desc->affinity_notify;
564 desc->affinity_notify = notify;
565 raw_spin_unlock_irqrestore(&desc->lock, flags);
566
567 if (old_notify) {
568 if (cancel_work_sync(&old_notify->work)) {
569 /* Pending work had a ref, put that one too */
570 kref_put(&old_notify->kref, old_notify->release);
571 }
572 kref_put(&old_notify->kref, old_notify->release);
573 }
574
575 return 0;
576}
577EXPORT_SYMBOL_GPL(irq_set_affinity_notifier);
578
579#ifndef CONFIG_AUTO_IRQ_AFFINITY
580/*
581 * Generic version of the affinity autoselector.
582 */
583int irq_setup_affinity(struct irq_desc *desc)
584{
585 struct cpumask *set = irq_default_affinity;
586 int ret, node = irq_desc_get_node(desc);
587 static DEFINE_RAW_SPINLOCK(mask_lock);
588 static struct cpumask mask;
589
590 /* Excludes PER_CPU and NO_BALANCE interrupts */
591 if (!__irq_can_set_affinity(desc))
592 return 0;
593
594 raw_spin_lock(&mask_lock);
595 /*
596 * Preserve the managed affinity setting and a userspace affinity
597 * setup, but make sure that one of the targets is online.
598 */
599 if (irqd_affinity_is_managed(&desc->irq_data) ||
600 irqd_has_set(&desc->irq_data, IRQD_AFFINITY_SET)) {
601 if (cpumask_intersects(desc->irq_common_data.affinity,
602 cpu_online_mask))
603 set = desc->irq_common_data.affinity;
604 else
605 irqd_clear(&desc->irq_data, IRQD_AFFINITY_SET);
606 }
607
608 cpumask_and(&mask, cpu_online_mask, set);
609 if (cpumask_empty(&mask))
610 cpumask_copy(&mask, cpu_online_mask);
611
612 if (node != NUMA_NO_NODE) {
613 const struct cpumask *nodemask = cpumask_of_node(node);
614
615 /* make sure at least one of the cpus in nodemask is online */
616 if (cpumask_intersects(&mask, nodemask))
617 cpumask_and(&mask, &mask, nodemask);
618 }
619 ret = irq_do_set_affinity(&desc->irq_data, &mask, false);
620 raw_spin_unlock(&mask_lock);
621 return ret;
622}
623#else
624/* Wrapper for ALPHA specific affinity selector magic */
625int irq_setup_affinity(struct irq_desc *desc)
626{
627 return irq_select_affinity(irq_desc_get_irq(desc));
628}
629#endif /* CONFIG_AUTO_IRQ_AFFINITY */
630#endif /* CONFIG_SMP */
631
632
633/**
634 * irq_set_vcpu_affinity - Set vcpu affinity for the interrupt
635 * @irq: interrupt number to set affinity
636 * @vcpu_info: vCPU specific data or pointer to a percpu array of vCPU
637 * specific data for percpu_devid interrupts
638 *
639 * This function uses the vCPU specific data to set the vCPU
640 * affinity for an irq. The vCPU specific data is passed from
641 * outside, such as KVM. One example code path is as below:
642 * KVM -> IOMMU -> irq_set_vcpu_affinity().
643 */
644int irq_set_vcpu_affinity(unsigned int irq, void *vcpu_info)
645{
646 unsigned long flags;
647 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
648 struct irq_data *data;
649 struct irq_chip *chip;
650 int ret = -ENOSYS;
651
652 if (!desc)
653 return -EINVAL;
654
655 data = irq_desc_get_irq_data(desc);
656 do {
657 chip = irq_data_get_irq_chip(data);
658 if (chip && chip->irq_set_vcpu_affinity)
659 break;
660#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
661 data = data->parent_data;
662#else
663 data = NULL;
664#endif
665 } while (data);
666
667 if (data)
668 ret = chip->irq_set_vcpu_affinity(data, vcpu_info);
669 irq_put_desc_unlock(desc, flags);
670
671 return ret;
672}
673EXPORT_SYMBOL_GPL(irq_set_vcpu_affinity);
674
675void __disable_irq(struct irq_desc *desc)
676{
677 if (!desc->depth++)
678 irq_disable(desc);
679}
680
681static int __disable_irq_nosync(unsigned int irq)
682{
683 unsigned long flags;
684 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
685
686 if (!desc)
687 return -EINVAL;
688 __disable_irq(desc);
689 irq_put_desc_busunlock(desc, flags);
690 return 0;
691}
692
693/**
694 * disable_irq_nosync - disable an irq without waiting
695 * @irq: Interrupt to disable
696 *
697 * Disable the selected interrupt line. Disables and Enables are
698 * nested.
699 * Unlike disable_irq(), this function does not ensure existing
700 * instances of the IRQ handler have completed before returning.
701 *
702 * This function may be called from IRQ context.
703 */
704void disable_irq_nosync(unsigned int irq)
705{
706 __disable_irq_nosync(irq);
707}
708EXPORT_SYMBOL(disable_irq_nosync);
709
710/**
711 * disable_irq - disable an irq and wait for completion
712 * @irq: Interrupt to disable
713 *
714 * Disable the selected interrupt line. Enables and Disables are
715 * nested.
716 * This function waits for any pending IRQ handlers for this interrupt
717 * to complete before returning. If you use this function while
718 * holding a resource the IRQ handler may need you will deadlock.
719 *
720 * This function may be called - with care - from IRQ context.
721 */
722void disable_irq(unsigned int irq)
723{
724 if (!__disable_irq_nosync(irq))
725 synchronize_irq(irq);
726}
727EXPORT_SYMBOL(disable_irq);
728
729/**
730 * disable_hardirq - disables an irq and waits for hardirq completion
731 * @irq: Interrupt to disable
732 *
733 * Disable the selected interrupt line. Enables and Disables are
734 * nested.
735 * This function waits for any pending hard IRQ handlers for this
736 * interrupt to complete before returning. If you use this function while
737 * holding a resource the hard IRQ handler may need you will deadlock.
738 *
739 * When used to optimistically disable an interrupt from atomic context
740 * the return value must be checked.
741 *
742 * Returns: false if a threaded handler is active.
743 *
744 * This function may be called - with care - from IRQ context.
745 */
746bool disable_hardirq(unsigned int irq)
747{
748 if (!__disable_irq_nosync(irq))
749 return synchronize_hardirq(irq);
750
751 return false;
752}
753EXPORT_SYMBOL_GPL(disable_hardirq);
754
755/**
756 * disable_nmi_nosync - disable an nmi without waiting
757 * @irq: Interrupt to disable
758 *
759 * Disable the selected interrupt line. Disables and enables are
760 * nested.
761 * The interrupt to disable must have been requested through request_nmi.
762 * Unlike disable_nmi(), this function does not ensure existing
763 * instances of the IRQ handler have completed before returning.
764 */
765void disable_nmi_nosync(unsigned int irq)
766{
767 disable_irq_nosync(irq);
768}
769
770void __enable_irq(struct irq_desc *desc)
771{
772 switch (desc->depth) {
773 case 0:
774 err_out:
775 WARN(1, KERN_WARNING "Unbalanced enable for IRQ %d\n",
776 irq_desc_get_irq(desc));
777 break;
778 case 1: {
779 if (desc->istate & IRQS_SUSPENDED)
780 goto err_out;
781 /* Prevent probing on this irq: */
782 irq_settings_set_noprobe(desc);
783 /*
784 * Call irq_startup() not irq_enable() here because the
785 * interrupt might be marked NOAUTOEN. So irq_startup()
786 * needs to be invoked when it gets enabled the first
787 * time. If it was already started up, then irq_startup()
788 * will invoke irq_enable() under the hood.
789 */
790 irq_startup(desc, IRQ_RESEND, IRQ_START_FORCE);
791 break;
792 }
793 default:
794 desc->depth--;
795 }
796}
797
798/**
799 * enable_irq - enable handling of an irq
800 * @irq: Interrupt to enable
801 *
802 * Undoes the effect of one call to disable_irq(). If this
803 * matches the last disable, processing of interrupts on this
804 * IRQ line is re-enabled.
805 *
806 * This function may be called from IRQ context only when
807 * desc->irq_data.chip->bus_lock and desc->chip->bus_sync_unlock are NULL !
808 */
809void enable_irq(unsigned int irq)
810{
811 unsigned long flags;
812 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
813
814 if (!desc)
815 return;
816 if (WARN(!desc->irq_data.chip,
817 KERN_ERR "enable_irq before setup/request_irq: irq %u\n", irq))
818 goto out;
819
820 __enable_irq(desc);
821out:
822 irq_put_desc_busunlock(desc, flags);
823}
824EXPORT_SYMBOL(enable_irq);
825
826/**
827 * enable_nmi - enable handling of an nmi
828 * @irq: Interrupt to enable
829 *
830 * The interrupt to enable must have been requested through request_nmi.
831 * Undoes the effect of one call to disable_nmi(). If this
832 * matches the last disable, processing of interrupts on this
833 * IRQ line is re-enabled.
834 */
835void enable_nmi(unsigned int irq)
836{
837 enable_irq(irq);
838}
839
840static int set_irq_wake_real(unsigned int irq, unsigned int on)
841{
842 struct irq_desc *desc = irq_to_desc(irq);
843 int ret = -ENXIO;
844
845 if (irq_desc_get_chip(desc)->flags & IRQCHIP_SKIP_SET_WAKE)
846 return 0;
847
848 if (desc->irq_data.chip->irq_set_wake)
849 ret = desc->irq_data.chip->irq_set_wake(&desc->irq_data, on);
850
851 return ret;
852}
853
854/**
855 * irq_set_irq_wake - control irq power management wakeup
856 * @irq: interrupt to control
857 * @on: enable/disable power management wakeup
858 *
859 * Enable/disable power management wakeup mode, which is
860 * disabled by default. Enables and disables must match,
861 * just as they match for non-wakeup mode support.
862 *
863 * Wakeup mode lets this IRQ wake the system from sleep
864 * states like "suspend to RAM".
865 *
866 * Note: irq enable/disable state is completely orthogonal
867 * to the enable/disable state of irq wake. An irq can be
868 * disabled with disable_irq() and still wake the system as
869 * long as the irq has wake enabled. If this does not hold,
870 * then the underlying irq chip and the related driver need
871 * to be investigated.
872 */
873int irq_set_irq_wake(unsigned int irq, unsigned int on)
874{
875 unsigned long flags;
876 struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
877 int ret = 0;
878
879 if (!desc)
880 return -EINVAL;
881
882 /* Don't use NMIs as wake up interrupts please */
883 if (desc->istate & IRQS_NMI) {
884 ret = -EINVAL;
885 goto out_unlock;
886 }
887
888 /* wakeup-capable irqs can be shared between drivers that
889 * don't need to have the same sleep mode behaviors.
890 */
891 if (on) {
892 if (desc->wake_depth++ == 0) {
893 ret = set_irq_wake_real(irq, on);
894 if (ret)
895 desc->wake_depth = 0;
896 else
897 irqd_set(&desc->irq_data, IRQD_WAKEUP_STATE);
898 }
899 } else {
900 if (desc->wake_depth == 0) {
901 WARN(1, "Unbalanced IRQ %d wake disable\n", irq);
902 } else if (--desc->wake_depth == 0) {
903 ret = set_irq_wake_real(irq, on);
904 if (ret)
905 desc->wake_depth = 1;
906 else
907 irqd_clear(&desc->irq_data, IRQD_WAKEUP_STATE);
908 }
909 }
910
911out_unlock:
912 irq_put_desc_busunlock(desc, flags);
913 return ret;
914}
915EXPORT_SYMBOL(irq_set_irq_wake);
916
917/*
918 * Internal function that tells the architecture code whether a
919 * particular irq has been exclusively allocated or is available
920 * for driver use.
921 */
922int can_request_irq(unsigned int irq, unsigned long irqflags)
923{
924 unsigned long flags;
925 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
926 int canrequest = 0;
927
928 if (!desc)
929 return 0;
930
931 if (irq_settings_can_request(desc)) {
932 if (!desc->action ||
933 irqflags & desc->action->flags & IRQF_SHARED)
934 canrequest = 1;
935 }
936 irq_put_desc_unlock(desc, flags);
937 return canrequest;
938}
939
940int __irq_set_trigger(struct irq_desc *desc, unsigned long flags)
941{
942 struct irq_chip *chip = desc->irq_data.chip;
943 int ret, unmask = 0;
944
945 if (!chip || !chip->irq_set_type) {
946 /*
947 * IRQF_TRIGGER_* but the PIC does not support multiple
948 * flow-types?
949 */
950 pr_debug("No set_type function for IRQ %d (%s)\n",
951 irq_desc_get_irq(desc),
952 chip ? (chip->name ? : "unknown") : "unknown");
953 return 0;
954 }
955
956 if (chip->flags & IRQCHIP_SET_TYPE_MASKED) {
957 if (!irqd_irq_masked(&desc->irq_data))
958 mask_irq(desc);
959 if (!irqd_irq_disabled(&desc->irq_data))
960 unmask = 1;
961 }
962
963 /* Mask all flags except trigger mode */
964 flags &= IRQ_TYPE_SENSE_MASK;
965 ret = chip->irq_set_type(&desc->irq_data, flags);
966
967 switch (ret) {
968 case IRQ_SET_MASK_OK:
969 case IRQ_SET_MASK_OK_DONE:
970 irqd_clear(&desc->irq_data, IRQD_TRIGGER_MASK);
971 irqd_set(&desc->irq_data, flags);
972 fallthrough;
973
974 case IRQ_SET_MASK_OK_NOCOPY:
975 flags = irqd_get_trigger_type(&desc->irq_data);
976 irq_settings_set_trigger_mask(desc, flags);
977 irqd_clear(&desc->irq_data, IRQD_LEVEL);
978 irq_settings_clr_level(desc);
979 if (flags & IRQ_TYPE_LEVEL_MASK) {
980 irq_settings_set_level(desc);
981 irqd_set(&desc->irq_data, IRQD_LEVEL);
982 }
983
984 ret = 0;
985 break;
986 default:
987 pr_err("Setting trigger mode %lu for irq %u failed (%pS)\n",
988 flags, irq_desc_get_irq(desc), chip->irq_set_type);
989 }
990 if (unmask)
991 unmask_irq(desc);
992 return ret;
993}
994
995#ifdef CONFIG_HARDIRQS_SW_RESEND
996int irq_set_parent(int irq, int parent_irq)
997{
998 unsigned long flags;
999 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
1000
1001 if (!desc)
1002 return -EINVAL;
1003
1004 desc->parent_irq = parent_irq;
1005
1006 irq_put_desc_unlock(desc, flags);
1007 return 0;
1008}
1009EXPORT_SYMBOL_GPL(irq_set_parent);
1010#endif
1011
1012/*
1013 * Default primary interrupt handler for threaded interrupts. Is
1014 * assigned as primary handler when request_threaded_irq is called
1015 * with handler == NULL. Useful for oneshot interrupts.
1016 */
1017static irqreturn_t irq_default_primary_handler(int irq, void *dev_id)
1018{
1019 return IRQ_WAKE_THREAD;
1020}
1021
1022/*
1023 * Primary handler for nested threaded interrupts. Should never be
1024 * called.
1025 */
1026static irqreturn_t irq_nested_primary_handler(int irq, void *dev_id)
1027{
1028 WARN(1, "Primary handler called for nested irq %d\n", irq);
1029 return IRQ_NONE;
1030}
1031
1032static irqreturn_t irq_forced_secondary_handler(int irq, void *dev_id)
1033{
1034 WARN(1, "Secondary action handler called for irq %d\n", irq);
1035 return IRQ_NONE;
1036}
1037
1038static int irq_wait_for_interrupt(struct irqaction *action)
1039{
1040 for (;;) {
1041 set_current_state(TASK_INTERRUPTIBLE);
1042
1043 if (kthread_should_stop()) {
1044 /* may need to run one last time */
1045 if (test_and_clear_bit(IRQTF_RUNTHREAD,
1046 &action->thread_flags)) {
1047 __set_current_state(TASK_RUNNING);
1048 return 0;
1049 }
1050 __set_current_state(TASK_RUNNING);
1051 return -1;
1052 }
1053
1054 if (test_and_clear_bit(IRQTF_RUNTHREAD,
1055 &action->thread_flags)) {
1056 __set_current_state(TASK_RUNNING);
1057 return 0;
1058 }
1059 schedule();
1060 }
1061}
1062
1063/*
1064 * Oneshot interrupts keep the irq line masked until the threaded
1065 * handler finished. unmask if the interrupt has not been disabled and
1066 * is marked MASKED.
1067 */
1068static void irq_finalize_oneshot(struct irq_desc *desc,
1069 struct irqaction *action)
1070{
1071 if (!(desc->istate & IRQS_ONESHOT) ||
1072 action->handler == irq_forced_secondary_handler)
1073 return;
1074again:
1075 chip_bus_lock(desc);
1076 raw_spin_lock_irq(&desc->lock);
1077
1078 /*
1079 * Implausible though it may be we need to protect us against
1080 * the following scenario:
1081 *
1082 * The thread is faster done than the hard interrupt handler
1083 * on the other CPU. If we unmask the irq line then the
1084 * interrupt can come in again and masks the line, leaves due
1085 * to IRQS_INPROGRESS and the irq line is masked forever.
1086 *
1087 * This also serializes the state of shared oneshot handlers
1088 * versus "desc->threads_oneshot |= action->thread_mask;" in
1089 * irq_wake_thread(). See the comment there which explains the
1090 * serialization.
1091 */
1092 if (unlikely(irqd_irq_inprogress(&desc->irq_data))) {
1093 raw_spin_unlock_irq(&desc->lock);
1094 chip_bus_sync_unlock(desc);
1095 cpu_relax();
1096 goto again;
1097 }
1098
1099 /*
1100 * Now check again, whether the thread should run. Otherwise
1101 * we would clear the threads_oneshot bit of this thread which
1102 * was just set.
1103 */
1104 if (test_bit(IRQTF_RUNTHREAD, &action->thread_flags))
1105 goto out_unlock;
1106
1107 desc->threads_oneshot &= ~action->thread_mask;
1108
1109 if (!desc->threads_oneshot && !irqd_irq_disabled(&desc->irq_data) &&
1110 irqd_irq_masked(&desc->irq_data))
1111 unmask_threaded_irq(desc);
1112
1113out_unlock:
1114 raw_spin_unlock_irq(&desc->lock);
1115 chip_bus_sync_unlock(desc);
1116}
1117
1118#ifdef CONFIG_SMP
1119/*
1120 * Check whether we need to change the affinity of the interrupt thread.
1121 */
1122static void
1123irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
1124{
1125 cpumask_var_t mask;
1126 bool valid = true;
1127
1128 if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags))
1129 return;
1130
1131 /*
1132 * In case we are out of memory we set IRQTF_AFFINITY again and
1133 * try again next time
1134 */
1135 if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
1136 set_bit(IRQTF_AFFINITY, &action->thread_flags);
1137 return;
1138 }
1139
1140 raw_spin_lock_irq(&desc->lock);
1141 /*
1142 * This code is triggered unconditionally. Check the affinity
1143 * mask pointer. For CPU_MASK_OFFSTACK=n this is optimized out.
1144 */
1145 if (cpumask_available(desc->irq_common_data.affinity)) {
1146 const struct cpumask *m;
1147
1148 m = irq_data_get_effective_affinity_mask(&desc->irq_data);
1149 cpumask_copy(mask, m);
1150 } else {
1151 valid = false;
1152 }
1153 raw_spin_unlock_irq(&desc->lock);
1154
1155 if (valid)
1156 set_cpus_allowed_ptr(current, mask);
1157 free_cpumask_var(mask);
1158}
1159#else
1160static inline void
1161irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { }
1162#endif
1163
1164/*
1165 * Interrupts which are not explicitly requested as threaded
1166 * interrupts rely on the implicit bh/preempt disable of the hard irq
1167 * context. So we need to disable bh here to avoid deadlocks and other
1168 * side effects.
1169 */
1170static irqreturn_t
1171irq_forced_thread_fn(struct irq_desc *desc, struct irqaction *action)
1172{
1173 irqreturn_t ret;
1174
1175 local_bh_disable();
1176 if (!IS_ENABLED(CONFIG_PREEMPT_RT))
1177 local_irq_disable();
1178 ret = action->thread_fn(action->irq, action->dev_id);
1179 if (ret == IRQ_HANDLED)
1180 atomic_inc(&desc->threads_handled);
1181
1182 irq_finalize_oneshot(desc, action);
1183 if (!IS_ENABLED(CONFIG_PREEMPT_RT))
1184 local_irq_enable();
1185 local_bh_enable();
1186 return ret;
1187}
1188
1189/*
1190 * Interrupts explicitly requested as threaded interrupts want to be
1191 * preemptible - many of them need to sleep and wait for slow busses to
1192 * complete.
1193 */
1194static irqreturn_t irq_thread_fn(struct irq_desc *desc,
1195 struct irqaction *action)
1196{
1197 irqreturn_t ret;
1198
1199 ret = action->thread_fn(action->irq, action->dev_id);
1200 if (ret == IRQ_HANDLED)
1201 atomic_inc(&desc->threads_handled);
1202
1203 irq_finalize_oneshot(desc, action);
1204 return ret;
1205}
1206
1207static void wake_threads_waitq(struct irq_desc *desc)
1208{
1209 if (atomic_dec_and_test(&desc->threads_active))
1210 wake_up(&desc->wait_for_threads);
1211}
1212
1213static void irq_thread_dtor(struct callback_head *unused)
1214{
1215 struct task_struct *tsk = current;
1216 struct irq_desc *desc;
1217 struct irqaction *action;
1218
1219 if (WARN_ON_ONCE(!(current->flags & PF_EXITING)))
1220 return;
1221
1222 action = kthread_data(tsk);
1223
1224 pr_err("exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n",
1225 tsk->comm, tsk->pid, action->irq);
1226
1227
1228 desc = irq_to_desc(action->irq);
1229 /*
1230 * If IRQTF_RUNTHREAD is set, we need to decrement
1231 * desc->threads_active and wake possible waiters.
1232 */
1233 if (test_and_clear_bit(IRQTF_RUNTHREAD, &action->thread_flags))
1234 wake_threads_waitq(desc);
1235
1236 /* Prevent a stale desc->threads_oneshot */
1237 irq_finalize_oneshot(desc, action);
1238}
1239
1240static void irq_wake_secondary(struct irq_desc *desc, struct irqaction *action)
1241{
1242 struct irqaction *secondary = action->secondary;
1243
1244 if (WARN_ON_ONCE(!secondary))
1245 return;
1246
1247 raw_spin_lock_irq(&desc->lock);
1248 __irq_wake_thread(desc, secondary);
1249 raw_spin_unlock_irq(&desc->lock);
1250}
1251
1252/*
1253 * Interrupt handler thread
1254 */
1255static int irq_thread(void *data)
1256{
1257 struct callback_head on_exit_work;
1258 struct irqaction *action = data;
1259 struct irq_desc *desc = irq_to_desc(action->irq);
1260 irqreturn_t (*handler_fn)(struct irq_desc *desc,
1261 struct irqaction *action);
1262
1263 if (force_irqthreads && test_bit(IRQTF_FORCED_THREAD,
1264 &action->thread_flags))
1265 handler_fn = irq_forced_thread_fn;
1266 else
1267 handler_fn = irq_thread_fn;
1268
1269 init_task_work(&on_exit_work, irq_thread_dtor);
1270 task_work_add(current, &on_exit_work, TWA_NONE);
1271
1272 irq_thread_check_affinity(desc, action);
1273
1274 while (!irq_wait_for_interrupt(action)) {
1275 irqreturn_t action_ret;
1276
1277 irq_thread_check_affinity(desc, action);
1278
1279 action_ret = handler_fn(desc, action);
1280 if (action_ret == IRQ_WAKE_THREAD)
1281 irq_wake_secondary(desc, action);
1282
1283 wake_threads_waitq(desc);
1284 }
1285
1286 /*
1287 * This is the regular exit path. __free_irq() is stopping the
1288 * thread via kthread_stop() after calling
1289 * synchronize_hardirq(). So neither IRQTF_RUNTHREAD nor the
1290 * oneshot mask bit can be set.
1291 */
1292 task_work_cancel(current, irq_thread_dtor);
1293 return 0;
1294}
1295
1296/**
1297 * irq_wake_thread - wake the irq thread for the action identified by dev_id
1298 * @irq: Interrupt line
1299 * @dev_id: Device identity for which the thread should be woken
1300 *
1301 */
1302void irq_wake_thread(unsigned int irq, void *dev_id)
1303{
1304 struct irq_desc *desc = irq_to_desc(irq);
1305 struct irqaction *action;
1306 unsigned long flags;
1307
1308 if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1309 return;
1310
1311 raw_spin_lock_irqsave(&desc->lock, flags);
1312 for_each_action_of_desc(desc, action) {
1313 if (action->dev_id == dev_id) {
1314 if (action->thread)
1315 __irq_wake_thread(desc, action);
1316 break;
1317 }
1318 }
1319 raw_spin_unlock_irqrestore(&desc->lock, flags);
1320}
1321EXPORT_SYMBOL_GPL(irq_wake_thread);
1322
1323static int irq_setup_forced_threading(struct irqaction *new)
1324{
1325 if (!force_irqthreads)
1326 return 0;
1327 if (new->flags & (IRQF_NO_THREAD | IRQF_PERCPU | IRQF_ONESHOT))
1328 return 0;
1329
1330 /*
1331 * No further action required for interrupts which are requested as
1332 * threaded interrupts already
1333 */
1334 if (new->handler == irq_default_primary_handler)
1335 return 0;
1336
1337 new->flags |= IRQF_ONESHOT;
1338
1339 /*
1340 * Handle the case where we have a real primary handler and a
1341 * thread handler. We force thread them as well by creating a
1342 * secondary action.
1343 */
1344 if (new->handler && new->thread_fn) {
1345 /* Allocate the secondary action */
1346 new->secondary = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
1347 if (!new->secondary)
1348 return -ENOMEM;
1349 new->secondary->handler = irq_forced_secondary_handler;
1350 new->secondary->thread_fn = new->thread_fn;
1351 new->secondary->dev_id = new->dev_id;
1352 new->secondary->irq = new->irq;
1353 new->secondary->name = new->name;
1354 }
1355 /* Deal with the primary handler */
1356 set_bit(IRQTF_FORCED_THREAD, &new->thread_flags);
1357 new->thread_fn = new->handler;
1358 new->handler = irq_default_primary_handler;
1359 return 0;
1360}
1361
1362static int irq_request_resources(struct irq_desc *desc)
1363{
1364 struct irq_data *d = &desc->irq_data;
1365 struct irq_chip *c = d->chip;
1366
1367 return c->irq_request_resources ? c->irq_request_resources(d) : 0;
1368}
1369
1370static void irq_release_resources(struct irq_desc *desc)
1371{
1372 struct irq_data *d = &desc->irq_data;
1373 struct irq_chip *c = d->chip;
1374
1375 if (c->irq_release_resources)
1376 c->irq_release_resources(d);
1377}
1378
1379static bool irq_supports_nmi(struct irq_desc *desc)
1380{
1381 struct irq_data *d = irq_desc_get_irq_data(desc);
1382
1383#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
1384 /* Only IRQs directly managed by the root irqchip can be set as NMI */
1385 if (d->parent_data)
1386 return false;
1387#endif
1388 /* Don't support NMIs for chips behind a slow bus */
1389 if (d->chip->irq_bus_lock || d->chip->irq_bus_sync_unlock)
1390 return false;
1391
1392 return d->chip->flags & IRQCHIP_SUPPORTS_NMI;
1393}
1394
1395static int irq_nmi_setup(struct irq_desc *desc)
1396{
1397 struct irq_data *d = irq_desc_get_irq_data(desc);
1398 struct irq_chip *c = d->chip;
1399
1400 return c->irq_nmi_setup ? c->irq_nmi_setup(d) : -EINVAL;
1401}
1402
1403static void irq_nmi_teardown(struct irq_desc *desc)
1404{
1405 struct irq_data *d = irq_desc_get_irq_data(desc);
1406 struct irq_chip *c = d->chip;
1407
1408 if (c->irq_nmi_teardown)
1409 c->irq_nmi_teardown(d);
1410}
1411
1412static int
1413setup_irq_thread(struct irqaction *new, unsigned int irq, bool secondary)
1414{
1415 struct task_struct *t;
1416
1417 if (!secondary) {
1418 t = kthread_create(irq_thread, new, "irq/%d-%s", irq,
1419 new->name);
1420 } else {
1421 t = kthread_create(irq_thread, new, "irq/%d-s-%s", irq,
1422 new->name);
1423 }
1424
1425 if (IS_ERR(t))
1426 return PTR_ERR(t);
1427
1428 sched_set_fifo(t);
1429
1430 /*
1431 * We keep the reference to the task struct even if
1432 * the thread dies to avoid that the interrupt code
1433 * references an already freed task_struct.
1434 */
1435 new->thread = get_task_struct(t);
1436 /*
1437 * Tell the thread to set its affinity. This is
1438 * important for shared interrupt handlers as we do
1439 * not invoke setup_affinity() for the secondary
1440 * handlers as everything is already set up. Even for
1441 * interrupts marked with IRQF_NO_BALANCE this is
1442 * correct as we want the thread to move to the cpu(s)
1443 * on which the requesting code placed the interrupt.
1444 */
1445 set_bit(IRQTF_AFFINITY, &new->thread_flags);
1446 return 0;
1447}
1448
1449/*
1450 * Internal function to register an irqaction - typically used to
1451 * allocate special interrupts that are part of the architecture.
1452 *
1453 * Locking rules:
1454 *
1455 * desc->request_mutex Provides serialization against a concurrent free_irq()
1456 * chip_bus_lock Provides serialization for slow bus operations
1457 * desc->lock Provides serialization against hard interrupts
1458 *
1459 * chip_bus_lock and desc->lock are sufficient for all other management and
1460 * interrupt related functions. desc->request_mutex solely serializes
1461 * request/free_irq().
1462 */
1463static int
1464__setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
1465{
1466 struct irqaction *old, **old_ptr;
1467 unsigned long flags, thread_mask = 0;
1468 int ret, nested, shared = 0;
1469
1470 if (!desc)
1471 return -EINVAL;
1472
1473 if (desc->irq_data.chip == &no_irq_chip)
1474 return -ENOSYS;
1475 if (!try_module_get(desc->owner))
1476 return -ENODEV;
1477
1478 new->irq = irq;
1479
1480 /*
1481 * If the trigger type is not specified by the caller,
1482 * then use the default for this interrupt.
1483 */
1484 if (!(new->flags & IRQF_TRIGGER_MASK))
1485 new->flags |= irqd_get_trigger_type(&desc->irq_data);
1486
1487 /*
1488 * Check whether the interrupt nests into another interrupt
1489 * thread.
1490 */
1491 nested = irq_settings_is_nested_thread(desc);
1492 if (nested) {
1493 if (!new->thread_fn) {
1494 ret = -EINVAL;
1495 goto out_mput;
1496 }
1497 /*
1498 * Replace the primary handler which was provided from
1499 * the driver for non nested interrupt handling by the
1500 * dummy function which warns when called.
1501 */
1502 new->handler = irq_nested_primary_handler;
1503 } else {
1504 if (irq_settings_can_thread(desc)) {
1505 ret = irq_setup_forced_threading(new);
1506 if (ret)
1507 goto out_mput;
1508 }
1509 }
1510
1511 /*
1512 * Create a handler thread when a thread function is supplied
1513 * and the interrupt does not nest into another interrupt
1514 * thread.
1515 */
1516 if (new->thread_fn && !nested) {
1517 ret = setup_irq_thread(new, irq, false);
1518 if (ret)
1519 goto out_mput;
1520 if (new->secondary) {
1521 ret = setup_irq_thread(new->secondary, irq, true);
1522 if (ret)
1523 goto out_thread;
1524 }
1525 }
1526
1527 /*
1528 * Drivers are often written to work w/o knowledge about the
1529 * underlying irq chip implementation, so a request for a
1530 * threaded irq without a primary hard irq context handler
1531 * requires the ONESHOT flag to be set. Some irq chips like
1532 * MSI based interrupts are per se one shot safe. Check the
1533 * chip flags, so we can avoid the unmask dance at the end of
1534 * the threaded handler for those.
1535 */
1536 if (desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)
1537 new->flags &= ~IRQF_ONESHOT;
1538
1539 /*
1540 * Protects against a concurrent __free_irq() call which might wait
1541 * for synchronize_hardirq() to complete without holding the optional
1542 * chip bus lock and desc->lock. Also protects against handing out
1543 * a recycled oneshot thread_mask bit while it's still in use by
1544 * its previous owner.
1545 */
1546 mutex_lock(&desc->request_mutex);
1547
1548 /*
1549 * Acquire bus lock as the irq_request_resources() callback below
1550 * might rely on the serialization or the magic power management
1551 * functions which are abusing the irq_bus_lock() callback,
1552 */
1553 chip_bus_lock(desc);
1554
1555 /* First installed action requests resources. */
1556 if (!desc->action) {
1557 ret = irq_request_resources(desc);
1558 if (ret) {
1559 pr_err("Failed to request resources for %s (irq %d) on irqchip %s\n",
1560 new->name, irq, desc->irq_data.chip->name);
1561 goto out_bus_unlock;
1562 }
1563 }
1564
1565 /*
1566 * The following block of code has to be executed atomically
1567 * protected against a concurrent interrupt and any of the other
1568 * management calls which are not serialized via
1569 * desc->request_mutex or the optional bus lock.
1570 */
1571 raw_spin_lock_irqsave(&desc->lock, flags);
1572 old_ptr = &desc->action;
1573 old = *old_ptr;
1574 if (old) {
1575 /*
1576 * Can't share interrupts unless both agree to and are
1577 * the same type (level, edge, polarity). So both flag
1578 * fields must have IRQF_SHARED set and the bits which
1579 * set the trigger type must match. Also all must
1580 * agree on ONESHOT.
1581 * Interrupt lines used for NMIs cannot be shared.
1582 */
1583 unsigned int oldtype;
1584
1585 if (desc->istate & IRQS_NMI) {
1586 pr_err("Invalid attempt to share NMI for %s (irq %d) on irqchip %s.\n",
1587 new->name, irq, desc->irq_data.chip->name);
1588 ret = -EINVAL;
1589 goto out_unlock;
1590 }
1591
1592 /*
1593 * If nobody did set the configuration before, inherit
1594 * the one provided by the requester.
1595 */
1596 if (irqd_trigger_type_was_set(&desc->irq_data)) {
1597 oldtype = irqd_get_trigger_type(&desc->irq_data);
1598 } else {
1599 oldtype = new->flags & IRQF_TRIGGER_MASK;
1600 irqd_set_trigger_type(&desc->irq_data, oldtype);
1601 }
1602
1603 if (!((old->flags & new->flags) & IRQF_SHARED) ||
1604 (oldtype != (new->flags & IRQF_TRIGGER_MASK)) ||
1605 ((old->flags ^ new->flags) & IRQF_ONESHOT))
1606 goto mismatch;
1607
1608 /* All handlers must agree on per-cpuness */
1609 if ((old->flags & IRQF_PERCPU) !=
1610 (new->flags & IRQF_PERCPU))
1611 goto mismatch;
1612
1613 /* add new interrupt at end of irq queue */
1614 do {
1615 /*
1616 * Or all existing action->thread_mask bits,
1617 * so we can find the next zero bit for this
1618 * new action.
1619 */
1620 thread_mask |= old->thread_mask;
1621 old_ptr = &old->next;
1622 old = *old_ptr;
1623 } while (old);
1624 shared = 1;
1625 }
1626
1627 /*
1628 * Setup the thread mask for this irqaction for ONESHOT. For
1629 * !ONESHOT irqs the thread mask is 0 so we can avoid a
1630 * conditional in irq_wake_thread().
1631 */
1632 if (new->flags & IRQF_ONESHOT) {
1633 /*
1634 * Unlikely to have 32 resp 64 irqs sharing one line,
1635 * but who knows.
1636 */
1637 if (thread_mask == ~0UL) {
1638 ret = -EBUSY;
1639 goto out_unlock;
1640 }
1641 /*
1642 * The thread_mask for the action is or'ed to
1643 * desc->thread_active to indicate that the
1644 * IRQF_ONESHOT thread handler has been woken, but not
1645 * yet finished. The bit is cleared when a thread
1646 * completes. When all threads of a shared interrupt
1647 * line have completed desc->threads_active becomes
1648 * zero and the interrupt line is unmasked. See
1649 * handle.c:irq_wake_thread() for further information.
1650 *
1651 * If no thread is woken by primary (hard irq context)
1652 * interrupt handlers, then desc->threads_active is
1653 * also checked for zero to unmask the irq line in the
1654 * affected hard irq flow handlers
1655 * (handle_[fasteoi|level]_irq).
1656 *
1657 * The new action gets the first zero bit of
1658 * thread_mask assigned. See the loop above which or's
1659 * all existing action->thread_mask bits.
1660 */
1661 new->thread_mask = 1UL << ffz(thread_mask);
1662
1663 } else if (new->handler == irq_default_primary_handler &&
1664 !(desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)) {
1665 /*
1666 * The interrupt was requested with handler = NULL, so
1667 * we use the default primary handler for it. But it
1668 * does not have the oneshot flag set. In combination
1669 * with level interrupts this is deadly, because the
1670 * default primary handler just wakes the thread, then
1671 * the irq lines is reenabled, but the device still
1672 * has the level irq asserted. Rinse and repeat....
1673 *
1674 * While this works for edge type interrupts, we play
1675 * it safe and reject unconditionally because we can't
1676 * say for sure which type this interrupt really
1677 * has. The type flags are unreliable as the
1678 * underlying chip implementation can override them.
1679 */
1680 pr_err("Threaded irq requested with handler=NULL and !ONESHOT for %s (irq %d)\n",
1681 new->name, irq);
1682 ret = -EINVAL;
1683 goto out_unlock;
1684 }
1685
1686 if (!shared) {
1687 init_waitqueue_head(&desc->wait_for_threads);
1688
1689 /* Setup the type (level, edge polarity) if configured: */
1690 if (new->flags & IRQF_TRIGGER_MASK) {
1691 ret = __irq_set_trigger(desc,
1692 new->flags & IRQF_TRIGGER_MASK);
1693
1694 if (ret)
1695 goto out_unlock;
1696 }
1697
1698 /*
1699 * Activate the interrupt. That activation must happen
1700 * independently of IRQ_NOAUTOEN. request_irq() can fail
1701 * and the callers are supposed to handle
1702 * that. enable_irq() of an interrupt requested with
1703 * IRQ_NOAUTOEN is not supposed to fail. The activation
1704 * keeps it in shutdown mode, it merily associates
1705 * resources if necessary and if that's not possible it
1706 * fails. Interrupts which are in managed shutdown mode
1707 * will simply ignore that activation request.
1708 */
1709 ret = irq_activate(desc);
1710 if (ret)
1711 goto out_unlock;
1712
1713 desc->istate &= ~(IRQS_AUTODETECT | IRQS_SPURIOUS_DISABLED | \
1714 IRQS_ONESHOT | IRQS_WAITING);
1715 irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
1716
1717 if (new->flags & IRQF_PERCPU) {
1718 irqd_set(&desc->irq_data, IRQD_PER_CPU);
1719 irq_settings_set_per_cpu(desc);
1720 if (new->flags & IRQF_NO_DEBUG)
1721 irq_settings_set_no_debug(desc);
1722 }
1723
1724 if (noirqdebug)
1725 irq_settings_set_no_debug(desc);
1726
1727 if (new->flags & IRQF_ONESHOT)
1728 desc->istate |= IRQS_ONESHOT;
1729
1730 /* Exclude IRQ from balancing if requested */
1731 if (new->flags & IRQF_NOBALANCING) {
1732 irq_settings_set_no_balancing(desc);
1733 irqd_set(&desc->irq_data, IRQD_NO_BALANCING);
1734 }
1735
1736 if (!(new->flags & IRQF_NO_AUTOEN) &&
1737 irq_settings_can_autoenable(desc)) {
1738 irq_startup(desc, IRQ_RESEND, IRQ_START_COND);
1739 } else {
1740 /*
1741 * Shared interrupts do not go well with disabling
1742 * auto enable. The sharing interrupt might request
1743 * it while it's still disabled and then wait for
1744 * interrupts forever.
1745 */
1746 WARN_ON_ONCE(new->flags & IRQF_SHARED);
1747 /* Undo nested disables: */
1748 desc->depth = 1;
1749 }
1750
1751 } else if (new->flags & IRQF_TRIGGER_MASK) {
1752 unsigned int nmsk = new->flags & IRQF_TRIGGER_MASK;
1753 unsigned int omsk = irqd_get_trigger_type(&desc->irq_data);
1754
1755 if (nmsk != omsk)
1756 /* hope the handler works with current trigger mode */
1757 pr_warn("irq %d uses trigger mode %u; requested %u\n",
1758 irq, omsk, nmsk);
1759 }
1760
1761 *old_ptr = new;
1762
1763 irq_pm_install_action(desc, new);
1764
1765 /* Reset broken irq detection when installing new handler */
1766 desc->irq_count = 0;
1767 desc->irqs_unhandled = 0;
1768
1769 /*
1770 * Check whether we disabled the irq via the spurious handler
1771 * before. Reenable it and give it another chance.
1772 */
1773 if (shared && (desc->istate & IRQS_SPURIOUS_DISABLED)) {
1774 desc->istate &= ~IRQS_SPURIOUS_DISABLED;
1775 __enable_irq(desc);
1776 }
1777
1778 raw_spin_unlock_irqrestore(&desc->lock, flags);
1779 chip_bus_sync_unlock(desc);
1780 mutex_unlock(&desc->request_mutex);
1781
1782 irq_setup_timings(desc, new);
1783
1784 /*
1785 * Strictly no need to wake it up, but hung_task complains
1786 * when no hard interrupt wakes the thread up.
1787 */
1788 if (new->thread)
1789 wake_up_process(new->thread);
1790 if (new->secondary)
1791 wake_up_process(new->secondary->thread);
1792
1793 register_irq_proc(irq, desc);
1794 new->dir = NULL;
1795 register_handler_proc(irq, new);
1796 return 0;
1797
1798mismatch:
1799 if (!(new->flags & IRQF_PROBE_SHARED)) {
1800 pr_err("Flags mismatch irq %d. %08x (%s) vs. %08x (%s)\n",
1801 irq, new->flags, new->name, old->flags, old->name);
1802#ifdef CONFIG_DEBUG_SHIRQ
1803 dump_stack();
1804#endif
1805 }
1806 ret = -EBUSY;
1807
1808out_unlock:
1809 raw_spin_unlock_irqrestore(&desc->lock, flags);
1810
1811 if (!desc->action)
1812 irq_release_resources(desc);
1813out_bus_unlock:
1814 chip_bus_sync_unlock(desc);
1815 mutex_unlock(&desc->request_mutex);
1816
1817out_thread:
1818 if (new->thread) {
1819 struct task_struct *t = new->thread;
1820
1821 new->thread = NULL;
1822 kthread_stop(t);
1823 put_task_struct(t);
1824 }
1825 if (new->secondary && new->secondary->thread) {
1826 struct task_struct *t = new->secondary->thread;
1827
1828 new->secondary->thread = NULL;
1829 kthread_stop(t);
1830 put_task_struct(t);
1831 }
1832out_mput:
1833 module_put(desc->owner);
1834 return ret;
1835}
1836
1837/*
1838 * Internal function to unregister an irqaction - used to free
1839 * regular and special interrupts that are part of the architecture.
1840 */
1841static struct irqaction *__free_irq(struct irq_desc *desc, void *dev_id)
1842{
1843 unsigned irq = desc->irq_data.irq;
1844 struct irqaction *action, **action_ptr;
1845 unsigned long flags;
1846
1847 WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
1848
1849 mutex_lock(&desc->request_mutex);
1850 chip_bus_lock(desc);
1851 raw_spin_lock_irqsave(&desc->lock, flags);
1852
1853 /*
1854 * There can be multiple actions per IRQ descriptor, find the right
1855 * one based on the dev_id:
1856 */
1857 action_ptr = &desc->action;
1858 for (;;) {
1859 action = *action_ptr;
1860
1861 if (!action) {
1862 WARN(1, "Trying to free already-free IRQ %d\n", irq);
1863 raw_spin_unlock_irqrestore(&desc->lock, flags);
1864 chip_bus_sync_unlock(desc);
1865 mutex_unlock(&desc->request_mutex);
1866 return NULL;
1867 }
1868
1869 if (action->dev_id == dev_id)
1870 break;
1871 action_ptr = &action->next;
1872 }
1873
1874 /* Found it - now remove it from the list of entries: */
1875 *action_ptr = action->next;
1876
1877 irq_pm_remove_action(desc, action);
1878
1879 /* If this was the last handler, shut down the IRQ line: */
1880 if (!desc->action) {
1881 irq_settings_clr_disable_unlazy(desc);
1882 /* Only shutdown. Deactivate after synchronize_hardirq() */
1883 irq_shutdown(desc);
1884 }
1885
1886#ifdef CONFIG_SMP
1887 /* make sure affinity_hint is cleaned up */
1888 if (WARN_ON_ONCE(desc->affinity_hint))
1889 desc->affinity_hint = NULL;
1890#endif
1891
1892 raw_spin_unlock_irqrestore(&desc->lock, flags);
1893 /*
1894 * Drop bus_lock here so the changes which were done in the chip
1895 * callbacks above are synced out to the irq chips which hang
1896 * behind a slow bus (I2C, SPI) before calling synchronize_hardirq().
1897 *
1898 * Aside of that the bus_lock can also be taken from the threaded
1899 * handler in irq_finalize_oneshot() which results in a deadlock
1900 * because kthread_stop() would wait forever for the thread to
1901 * complete, which is blocked on the bus lock.
1902 *
1903 * The still held desc->request_mutex() protects against a
1904 * concurrent request_irq() of this irq so the release of resources
1905 * and timing data is properly serialized.
1906 */
1907 chip_bus_sync_unlock(desc);
1908
1909 unregister_handler_proc(irq, action);
1910
1911 /*
1912 * Make sure it's not being used on another CPU and if the chip
1913 * supports it also make sure that there is no (not yet serviced)
1914 * interrupt in flight at the hardware level.
1915 */
1916 __synchronize_hardirq(desc, true);
1917
1918#ifdef CONFIG_DEBUG_SHIRQ
1919 /*
1920 * It's a shared IRQ -- the driver ought to be prepared for an IRQ
1921 * event to happen even now it's being freed, so let's make sure that
1922 * is so by doing an extra call to the handler ....
1923 *
1924 * ( We do this after actually deregistering it, to make sure that a
1925 * 'real' IRQ doesn't run in parallel with our fake. )
1926 */
1927 if (action->flags & IRQF_SHARED) {
1928 local_irq_save(flags);
1929 action->handler(irq, dev_id);
1930 local_irq_restore(flags);
1931 }
1932#endif
1933
1934 /*
1935 * The action has already been removed above, but the thread writes
1936 * its oneshot mask bit when it completes. Though request_mutex is
1937 * held across this which prevents __setup_irq() from handing out
1938 * the same bit to a newly requested action.
1939 */
1940 if (action->thread) {
1941 kthread_stop(action->thread);
1942 put_task_struct(action->thread);
1943 if (action->secondary && action->secondary->thread) {
1944 kthread_stop(action->secondary->thread);
1945 put_task_struct(action->secondary->thread);
1946 }
1947 }
1948
1949 /* Last action releases resources */
1950 if (!desc->action) {
1951 /*
1952 * Reacquire bus lock as irq_release_resources() might
1953 * require it to deallocate resources over the slow bus.
1954 */
1955 chip_bus_lock(desc);
1956 /*
1957 * There is no interrupt on the fly anymore. Deactivate it
1958 * completely.
1959 */
1960 raw_spin_lock_irqsave(&desc->lock, flags);
1961 irq_domain_deactivate_irq(&desc->irq_data);
1962 raw_spin_unlock_irqrestore(&desc->lock, flags);
1963
1964 irq_release_resources(desc);
1965 chip_bus_sync_unlock(desc);
1966 irq_remove_timings(desc);
1967 }
1968
1969 mutex_unlock(&desc->request_mutex);
1970
1971 irq_chip_pm_put(&desc->irq_data);
1972 module_put(desc->owner);
1973 kfree(action->secondary);
1974 return action;
1975}
1976
1977/**
1978 * free_irq - free an interrupt allocated with request_irq
1979 * @irq: Interrupt line to free
1980 * @dev_id: Device identity to free
1981 *
1982 * Remove an interrupt handler. The handler is removed and if the
1983 * interrupt line is no longer in use by any driver it is disabled.
1984 * On a shared IRQ the caller must ensure the interrupt is disabled
1985 * on the card it drives before calling this function. The function
1986 * does not return until any executing interrupts for this IRQ
1987 * have completed.
1988 *
1989 * This function must not be called from interrupt context.
1990 *
1991 * Returns the devname argument passed to request_irq.
1992 */
1993const void *free_irq(unsigned int irq, void *dev_id)
1994{
1995 struct irq_desc *desc = irq_to_desc(irq);
1996 struct irqaction *action;
1997 const char *devname;
1998
1999 if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
2000 return NULL;
2001
2002#ifdef CONFIG_SMP
2003 if (WARN_ON(desc->affinity_notify))
2004 desc->affinity_notify = NULL;
2005#endif
2006
2007 action = __free_irq(desc, dev_id);
2008
2009 if (!action)
2010 return NULL;
2011
2012 devname = action->name;
2013 kfree(action);
2014 return devname;
2015}
2016EXPORT_SYMBOL(free_irq);
2017
2018/* This function must be called with desc->lock held */
2019static const void *__cleanup_nmi(unsigned int irq, struct irq_desc *desc)
2020{
2021 const char *devname = NULL;
2022
2023 desc->istate &= ~IRQS_NMI;
2024
2025 if (!WARN_ON(desc->action == NULL)) {
2026 irq_pm_remove_action(desc, desc->action);
2027 devname = desc->action->name;
2028 unregister_handler_proc(irq, desc->action);
2029
2030 kfree(desc->action);
2031 desc->action = NULL;
2032 }
2033
2034 irq_settings_clr_disable_unlazy(desc);
2035 irq_shutdown_and_deactivate(desc);
2036
2037 irq_release_resources(desc);
2038
2039 irq_chip_pm_put(&desc->irq_data);
2040 module_put(desc->owner);
2041
2042 return devname;
2043}
2044
2045const void *free_nmi(unsigned int irq, void *dev_id)
2046{
2047 struct irq_desc *desc = irq_to_desc(irq);
2048 unsigned long flags;
2049 const void *devname;
2050
2051 if (!desc || WARN_ON(!(desc->istate & IRQS_NMI)))
2052 return NULL;
2053
2054 if (WARN_ON(irq_settings_is_per_cpu_devid(desc)))
2055 return NULL;
2056
2057 /* NMI still enabled */
2058 if (WARN_ON(desc->depth == 0))
2059 disable_nmi_nosync(irq);
2060
2061 raw_spin_lock_irqsave(&desc->lock, flags);
2062
2063 irq_nmi_teardown(desc);
2064 devname = __cleanup_nmi(irq, desc);
2065
2066 raw_spin_unlock_irqrestore(&desc->lock, flags);
2067
2068 return devname;
2069}
2070
2071/**
2072 * request_threaded_irq - allocate an interrupt line
2073 * @irq: Interrupt line to allocate
2074 * @handler: Function to be called when the IRQ occurs.
2075 * Primary handler for threaded interrupts
2076 * If NULL and thread_fn != NULL the default
2077 * primary handler is installed
2078 * @thread_fn: Function called from the irq handler thread
2079 * If NULL, no irq thread is created
2080 * @irqflags: Interrupt type flags
2081 * @devname: An ascii name for the claiming device
2082 * @dev_id: A cookie passed back to the handler function
2083 *
2084 * This call allocates interrupt resources and enables the
2085 * interrupt line and IRQ handling. From the point this
2086 * call is made your handler function may be invoked. Since
2087 * your handler function must clear any interrupt the board
2088 * raises, you must take care both to initialise your hardware
2089 * and to set up the interrupt handler in the right order.
2090 *
2091 * If you want to set up a threaded irq handler for your device
2092 * then you need to supply @handler and @thread_fn. @handler is
2093 * still called in hard interrupt context and has to check
2094 * whether the interrupt originates from the device. If yes it
2095 * needs to disable the interrupt on the device and return
2096 * IRQ_WAKE_THREAD which will wake up the handler thread and run
2097 * @thread_fn. This split handler design is necessary to support
2098 * shared interrupts.
2099 *
2100 * Dev_id must be globally unique. Normally the address of the
2101 * device data structure is used as the cookie. Since the handler
2102 * receives this value it makes sense to use it.
2103 *
2104 * If your interrupt is shared you must pass a non NULL dev_id
2105 * as this is required when freeing the interrupt.
2106 *
2107 * Flags:
2108 *
2109 * IRQF_SHARED Interrupt is shared
2110 * IRQF_TRIGGER_* Specify active edge(s) or level
2111 *
2112 */
2113int request_threaded_irq(unsigned int irq, irq_handler_t handler,
2114 irq_handler_t thread_fn, unsigned long irqflags,
2115 const char *devname, void *dev_id)
2116{
2117 struct irqaction *action;
2118 struct irq_desc *desc;
2119 int retval;
2120
2121 if (irq == IRQ_NOTCONNECTED)
2122 return -ENOTCONN;
2123
2124 /*
2125 * Sanity-check: shared interrupts must pass in a real dev-ID,
2126 * otherwise we'll have trouble later trying to figure out
2127 * which interrupt is which (messes up the interrupt freeing
2128 * logic etc).
2129 *
2130 * Also shared interrupts do not go well with disabling auto enable.
2131 * The sharing interrupt might request it while it's still disabled
2132 * and then wait for interrupts forever.
2133 *
2134 * Also IRQF_COND_SUSPEND only makes sense for shared interrupts and
2135 * it cannot be set along with IRQF_NO_SUSPEND.
2136 */
2137 if (((irqflags & IRQF_SHARED) && !dev_id) ||
2138 ((irqflags & IRQF_SHARED) && (irqflags & IRQF_NO_AUTOEN)) ||
2139 (!(irqflags & IRQF_SHARED) && (irqflags & IRQF_COND_SUSPEND)) ||
2140 ((irqflags & IRQF_NO_SUSPEND) && (irqflags & IRQF_COND_SUSPEND)))
2141 return -EINVAL;
2142
2143 desc = irq_to_desc(irq);
2144 if (!desc)
2145 return -EINVAL;
2146
2147 if (!irq_settings_can_request(desc) ||
2148 WARN_ON(irq_settings_is_per_cpu_devid(desc)))
2149 return -EINVAL;
2150
2151 if (!handler) {
2152 if (!thread_fn)
2153 return -EINVAL;
2154 handler = irq_default_primary_handler;
2155 }
2156
2157 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2158 if (!action)
2159 return -ENOMEM;
2160
2161 action->handler = handler;
2162 action->thread_fn = thread_fn;
2163 action->flags = irqflags;
2164 action->name = devname;
2165 action->dev_id = dev_id;
2166
2167 retval = irq_chip_pm_get(&desc->irq_data);
2168 if (retval < 0) {
2169 kfree(action);
2170 return retval;
2171 }
2172
2173 retval = __setup_irq(irq, desc, action);
2174
2175 if (retval) {
2176 irq_chip_pm_put(&desc->irq_data);
2177 kfree(action->secondary);
2178 kfree(action);
2179 }
2180
2181#ifdef CONFIG_DEBUG_SHIRQ_FIXME
2182 if (!retval && (irqflags & IRQF_SHARED)) {
2183 /*
2184 * It's a shared IRQ -- the driver ought to be prepared for it
2185 * to happen immediately, so let's make sure....
2186 * We disable the irq to make sure that a 'real' IRQ doesn't
2187 * run in parallel with our fake.
2188 */
2189 unsigned long flags;
2190
2191 disable_irq(irq);
2192 local_irq_save(flags);
2193
2194 handler(irq, dev_id);
2195
2196 local_irq_restore(flags);
2197 enable_irq(irq);
2198 }
2199#endif
2200 return retval;
2201}
2202EXPORT_SYMBOL(request_threaded_irq);
2203
2204/**
2205 * request_any_context_irq - allocate an interrupt line
2206 * @irq: Interrupt line to allocate
2207 * @handler: Function to be called when the IRQ occurs.
2208 * Threaded handler for threaded interrupts.
2209 * @flags: Interrupt type flags
2210 * @name: An ascii name for the claiming device
2211 * @dev_id: A cookie passed back to the handler function
2212 *
2213 * This call allocates interrupt resources and enables the
2214 * interrupt line and IRQ handling. It selects either a
2215 * hardirq or threaded handling method depending on the
2216 * context.
2217 *
2218 * On failure, it returns a negative value. On success,
2219 * it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED.
2220 */
2221int request_any_context_irq(unsigned int irq, irq_handler_t handler,
2222 unsigned long flags, const char *name, void *dev_id)
2223{
2224 struct irq_desc *desc;
2225 int ret;
2226
2227 if (irq == IRQ_NOTCONNECTED)
2228 return -ENOTCONN;
2229
2230 desc = irq_to_desc(irq);
2231 if (!desc)
2232 return -EINVAL;
2233
2234 if (irq_settings_is_nested_thread(desc)) {
2235 ret = request_threaded_irq(irq, NULL, handler,
2236 flags, name, dev_id);
2237 return !ret ? IRQC_IS_NESTED : ret;
2238 }
2239
2240 ret = request_irq(irq, handler, flags, name, dev_id);
2241 return !ret ? IRQC_IS_HARDIRQ : ret;
2242}
2243EXPORT_SYMBOL_GPL(request_any_context_irq);
2244
2245/**
2246 * request_nmi - allocate an interrupt line for NMI delivery
2247 * @irq: Interrupt line to allocate
2248 * @handler: Function to be called when the IRQ occurs.
2249 * Threaded handler for threaded interrupts.
2250 * @irqflags: Interrupt type flags
2251 * @name: An ascii name for the claiming device
2252 * @dev_id: A cookie passed back to the handler function
2253 *
2254 * This call allocates interrupt resources and enables the
2255 * interrupt line and IRQ handling. It sets up the IRQ line
2256 * to be handled as an NMI.
2257 *
2258 * An interrupt line delivering NMIs cannot be shared and IRQ handling
2259 * cannot be threaded.
2260 *
2261 * Interrupt lines requested for NMI delivering must produce per cpu
2262 * interrupts and have auto enabling setting disabled.
2263 *
2264 * Dev_id must be globally unique. Normally the address of the
2265 * device data structure is used as the cookie. Since the handler
2266 * receives this value it makes sense to use it.
2267 *
2268 * If the interrupt line cannot be used to deliver NMIs, function
2269 * will fail and return a negative value.
2270 */
2271int request_nmi(unsigned int irq, irq_handler_t handler,
2272 unsigned long irqflags, const char *name, void *dev_id)
2273{
2274 struct irqaction *action;
2275 struct irq_desc *desc;
2276 unsigned long flags;
2277 int retval;
2278
2279 if (irq == IRQ_NOTCONNECTED)
2280 return -ENOTCONN;
2281
2282 /* NMI cannot be shared, used for Polling */
2283 if (irqflags & (IRQF_SHARED | IRQF_COND_SUSPEND | IRQF_IRQPOLL))
2284 return -EINVAL;
2285
2286 if (!(irqflags & IRQF_PERCPU))
2287 return -EINVAL;
2288
2289 if (!handler)
2290 return -EINVAL;
2291
2292 desc = irq_to_desc(irq);
2293
2294 if (!desc || (irq_settings_can_autoenable(desc) &&
2295 !(irqflags & IRQF_NO_AUTOEN)) ||
2296 !irq_settings_can_request(desc) ||
2297 WARN_ON(irq_settings_is_per_cpu_devid(desc)) ||
2298 !irq_supports_nmi(desc))
2299 return -EINVAL;
2300
2301 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2302 if (!action)
2303 return -ENOMEM;
2304
2305 action->handler = handler;
2306 action->flags = irqflags | IRQF_NO_THREAD | IRQF_NOBALANCING;
2307 action->name = name;
2308 action->dev_id = dev_id;
2309
2310 retval = irq_chip_pm_get(&desc->irq_data);
2311 if (retval < 0)
2312 goto err_out;
2313
2314 retval = __setup_irq(irq, desc, action);
2315 if (retval)
2316 goto err_irq_setup;
2317
2318 raw_spin_lock_irqsave(&desc->lock, flags);
2319
2320 /* Setup NMI state */
2321 desc->istate |= IRQS_NMI;
2322 retval = irq_nmi_setup(desc);
2323 if (retval) {
2324 __cleanup_nmi(irq, desc);
2325 raw_spin_unlock_irqrestore(&desc->lock, flags);
2326 return -EINVAL;
2327 }
2328
2329 raw_spin_unlock_irqrestore(&desc->lock, flags);
2330
2331 return 0;
2332
2333err_irq_setup:
2334 irq_chip_pm_put(&desc->irq_data);
2335err_out:
2336 kfree(action);
2337
2338 return retval;
2339}
2340
2341void enable_percpu_irq(unsigned int irq, unsigned int type)
2342{
2343 unsigned int cpu = smp_processor_id();
2344 unsigned long flags;
2345 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2346
2347 if (!desc)
2348 return;
2349
2350 /*
2351 * If the trigger type is not specified by the caller, then
2352 * use the default for this interrupt.
2353 */
2354 type &= IRQ_TYPE_SENSE_MASK;
2355 if (type == IRQ_TYPE_NONE)
2356 type = irqd_get_trigger_type(&desc->irq_data);
2357
2358 if (type != IRQ_TYPE_NONE) {
2359 int ret;
2360
2361 ret = __irq_set_trigger(desc, type);
2362
2363 if (ret) {
2364 WARN(1, "failed to set type for IRQ%d\n", irq);
2365 goto out;
2366 }
2367 }
2368
2369 irq_percpu_enable(desc, cpu);
2370out:
2371 irq_put_desc_unlock(desc, flags);
2372}
2373EXPORT_SYMBOL_GPL(enable_percpu_irq);
2374
2375void enable_percpu_nmi(unsigned int irq, unsigned int type)
2376{
2377 enable_percpu_irq(irq, type);
2378}
2379
2380/**
2381 * irq_percpu_is_enabled - Check whether the per cpu irq is enabled
2382 * @irq: Linux irq number to check for
2383 *
2384 * Must be called from a non migratable context. Returns the enable
2385 * state of a per cpu interrupt on the current cpu.
2386 */
2387bool irq_percpu_is_enabled(unsigned int irq)
2388{
2389 unsigned int cpu = smp_processor_id();
2390 struct irq_desc *desc;
2391 unsigned long flags;
2392 bool is_enabled;
2393
2394 desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2395 if (!desc)
2396 return false;
2397
2398 is_enabled = cpumask_test_cpu(cpu, desc->percpu_enabled);
2399 irq_put_desc_unlock(desc, flags);
2400
2401 return is_enabled;
2402}
2403EXPORT_SYMBOL_GPL(irq_percpu_is_enabled);
2404
2405void disable_percpu_irq(unsigned int irq)
2406{
2407 unsigned int cpu = smp_processor_id();
2408 unsigned long flags;
2409 struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
2410
2411 if (!desc)
2412 return;
2413
2414 irq_percpu_disable(desc, cpu);
2415 irq_put_desc_unlock(desc, flags);
2416}
2417EXPORT_SYMBOL_GPL(disable_percpu_irq);
2418
2419void disable_percpu_nmi(unsigned int irq)
2420{
2421 disable_percpu_irq(irq);
2422}
2423
2424/*
2425 * Internal function to unregister a percpu irqaction.
2426 */
2427static struct irqaction *__free_percpu_irq(unsigned int irq, void __percpu *dev_id)
2428{
2429 struct irq_desc *desc = irq_to_desc(irq);
2430 struct irqaction *action;
2431 unsigned long flags;
2432
2433 WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
2434
2435 if (!desc)
2436 return NULL;
2437
2438 raw_spin_lock_irqsave(&desc->lock, flags);
2439
2440 action = desc->action;
2441 if (!action || action->percpu_dev_id != dev_id) {
2442 WARN(1, "Trying to free already-free IRQ %d\n", irq);
2443 goto bad;
2444 }
2445
2446 if (!cpumask_empty(desc->percpu_enabled)) {
2447 WARN(1, "percpu IRQ %d still enabled on CPU%d!\n",
2448 irq, cpumask_first(desc->percpu_enabled));
2449 goto bad;
2450 }
2451
2452 /* Found it - now remove it from the list of entries: */
2453 desc->action = NULL;
2454
2455 desc->istate &= ~IRQS_NMI;
2456
2457 raw_spin_unlock_irqrestore(&desc->lock, flags);
2458
2459 unregister_handler_proc(irq, action);
2460
2461 irq_chip_pm_put(&desc->irq_data);
2462 module_put(desc->owner);
2463 return action;
2464
2465bad:
2466 raw_spin_unlock_irqrestore(&desc->lock, flags);
2467 return NULL;
2468}
2469
2470/**
2471 * remove_percpu_irq - free a per-cpu interrupt
2472 * @irq: Interrupt line to free
2473 * @act: irqaction for the interrupt
2474 *
2475 * Used to remove interrupts statically setup by the early boot process.
2476 */
2477void remove_percpu_irq(unsigned int irq, struct irqaction *act)
2478{
2479 struct irq_desc *desc = irq_to_desc(irq);
2480
2481 if (desc && irq_settings_is_per_cpu_devid(desc))
2482 __free_percpu_irq(irq, act->percpu_dev_id);
2483}
2484
2485/**
2486 * free_percpu_irq - free an interrupt allocated with request_percpu_irq
2487 * @irq: Interrupt line to free
2488 * @dev_id: Device identity to free
2489 *
2490 * Remove a percpu interrupt handler. The handler is removed, but
2491 * the interrupt line is not disabled. This must be done on each
2492 * CPU before calling this function. The function does not return
2493 * until any executing interrupts for this IRQ have completed.
2494 *
2495 * This function must not be called from interrupt context.
2496 */
2497void free_percpu_irq(unsigned int irq, void __percpu *dev_id)
2498{
2499 struct irq_desc *desc = irq_to_desc(irq);
2500
2501 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2502 return;
2503
2504 chip_bus_lock(desc);
2505 kfree(__free_percpu_irq(irq, dev_id));
2506 chip_bus_sync_unlock(desc);
2507}
2508EXPORT_SYMBOL_GPL(free_percpu_irq);
2509
2510void free_percpu_nmi(unsigned int irq, void __percpu *dev_id)
2511{
2512 struct irq_desc *desc = irq_to_desc(irq);
2513
2514 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2515 return;
2516
2517 if (WARN_ON(!(desc->istate & IRQS_NMI)))
2518 return;
2519
2520 kfree(__free_percpu_irq(irq, dev_id));
2521}
2522
2523/**
2524 * setup_percpu_irq - setup a per-cpu interrupt
2525 * @irq: Interrupt line to setup
2526 * @act: irqaction for the interrupt
2527 *
2528 * Used to statically setup per-cpu interrupts in the early boot process.
2529 */
2530int setup_percpu_irq(unsigned int irq, struct irqaction *act)
2531{
2532 struct irq_desc *desc = irq_to_desc(irq);
2533 int retval;
2534
2535 if (!desc || !irq_settings_is_per_cpu_devid(desc))
2536 return -EINVAL;
2537
2538 retval = irq_chip_pm_get(&desc->irq_data);
2539 if (retval < 0)
2540 return retval;
2541
2542 retval = __setup_irq(irq, desc, act);
2543
2544 if (retval)
2545 irq_chip_pm_put(&desc->irq_data);
2546
2547 return retval;
2548}
2549
2550/**
2551 * __request_percpu_irq - allocate a percpu interrupt line
2552 * @irq: Interrupt line to allocate
2553 * @handler: Function to be called when the IRQ occurs.
2554 * @flags: Interrupt type flags (IRQF_TIMER only)
2555 * @devname: An ascii name for the claiming device
2556 * @dev_id: A percpu cookie passed back to the handler function
2557 *
2558 * This call allocates interrupt resources and enables the
2559 * interrupt on the local CPU. If the interrupt is supposed to be
2560 * enabled on other CPUs, it has to be done on each CPU using
2561 * enable_percpu_irq().
2562 *
2563 * Dev_id must be globally unique. It is a per-cpu variable, and
2564 * the handler gets called with the interrupted CPU's instance of
2565 * that variable.
2566 */
2567int __request_percpu_irq(unsigned int irq, irq_handler_t handler,
2568 unsigned long flags, const char *devname,
2569 void __percpu *dev_id)
2570{
2571 struct irqaction *action;
2572 struct irq_desc *desc;
2573 int retval;
2574
2575 if (!dev_id)
2576 return -EINVAL;
2577
2578 desc = irq_to_desc(irq);
2579 if (!desc || !irq_settings_can_request(desc) ||
2580 !irq_settings_is_per_cpu_devid(desc))
2581 return -EINVAL;
2582
2583 if (flags && flags != IRQF_TIMER)
2584 return -EINVAL;
2585
2586 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2587 if (!action)
2588 return -ENOMEM;
2589
2590 action->handler = handler;
2591 action->flags = flags | IRQF_PERCPU | IRQF_NO_SUSPEND;
2592 action->name = devname;
2593 action->percpu_dev_id = dev_id;
2594
2595 retval = irq_chip_pm_get(&desc->irq_data);
2596 if (retval < 0) {
2597 kfree(action);
2598 return retval;
2599 }
2600
2601 retval = __setup_irq(irq, desc, action);
2602
2603 if (retval) {
2604 irq_chip_pm_put(&desc->irq_data);
2605 kfree(action);
2606 }
2607
2608 return retval;
2609}
2610EXPORT_SYMBOL_GPL(__request_percpu_irq);
2611
2612/**
2613 * request_percpu_nmi - allocate a percpu interrupt line for NMI delivery
2614 * @irq: Interrupt line to allocate
2615 * @handler: Function to be called when the IRQ occurs.
2616 * @name: An ascii name for the claiming device
2617 * @dev_id: A percpu cookie passed back to the handler function
2618 *
2619 * This call allocates interrupt resources for a per CPU NMI. Per CPU NMIs
2620 * have to be setup on each CPU by calling prepare_percpu_nmi() before
2621 * being enabled on the same CPU by using enable_percpu_nmi().
2622 *
2623 * Dev_id must be globally unique. It is a per-cpu variable, and
2624 * the handler gets called with the interrupted CPU's instance of
2625 * that variable.
2626 *
2627 * Interrupt lines requested for NMI delivering should have auto enabling
2628 * setting disabled.
2629 *
2630 * If the interrupt line cannot be used to deliver NMIs, function
2631 * will fail returning a negative value.
2632 */
2633int request_percpu_nmi(unsigned int irq, irq_handler_t handler,
2634 const char *name, void __percpu *dev_id)
2635{
2636 struct irqaction *action;
2637 struct irq_desc *desc;
2638 unsigned long flags;
2639 int retval;
2640
2641 if (!handler)
2642 return -EINVAL;
2643
2644 desc = irq_to_desc(irq);
2645
2646 if (!desc || !irq_settings_can_request(desc) ||
2647 !irq_settings_is_per_cpu_devid(desc) ||
2648 irq_settings_can_autoenable(desc) ||
2649 !irq_supports_nmi(desc))
2650 return -EINVAL;
2651
2652 /* The line cannot already be NMI */
2653 if (desc->istate & IRQS_NMI)
2654 return -EINVAL;
2655
2656 action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2657 if (!action)
2658 return -ENOMEM;
2659
2660 action->handler = handler;
2661 action->flags = IRQF_PERCPU | IRQF_NO_SUSPEND | IRQF_NO_THREAD
2662 | IRQF_NOBALANCING;
2663 action->name = name;
2664 action->percpu_dev_id = dev_id;
2665
2666 retval = irq_chip_pm_get(&desc->irq_data);
2667 if (retval < 0)
2668 goto err_out;
2669
2670 retval = __setup_irq(irq, desc, action);
2671 if (retval)
2672 goto err_irq_setup;
2673
2674 raw_spin_lock_irqsave(&desc->lock, flags);
2675 desc->istate |= IRQS_NMI;
2676 raw_spin_unlock_irqrestore(&desc->lock, flags);
2677
2678 return 0;
2679
2680err_irq_setup:
2681 irq_chip_pm_put(&desc->irq_data);
2682err_out:
2683 kfree(action);
2684
2685 return retval;
2686}
2687
2688/**
2689 * prepare_percpu_nmi - performs CPU local setup for NMI delivery
2690 * @irq: Interrupt line to prepare for NMI delivery
2691 *
2692 * This call prepares an interrupt line to deliver NMI on the current CPU,
2693 * before that interrupt line gets enabled with enable_percpu_nmi().
2694 *
2695 * As a CPU local operation, this should be called from non-preemptible
2696 * context.
2697 *
2698 * If the interrupt line cannot be used to deliver NMIs, function
2699 * will fail returning a negative value.
2700 */
2701int prepare_percpu_nmi(unsigned int irq)
2702{
2703 unsigned long flags;
2704 struct irq_desc *desc;
2705 int ret = 0;
2706
2707 WARN_ON(preemptible());
2708
2709 desc = irq_get_desc_lock(irq, &flags,
2710 IRQ_GET_DESC_CHECK_PERCPU);
2711 if (!desc)
2712 return -EINVAL;
2713
2714 if (WARN(!(desc->istate & IRQS_NMI),
2715 KERN_ERR "prepare_percpu_nmi called for a non-NMI interrupt: irq %u\n",
2716 irq)) {
2717 ret = -EINVAL;
2718 goto out;
2719 }
2720
2721 ret = irq_nmi_setup(desc);
2722 if (ret) {
2723 pr_err("Failed to setup NMI delivery: irq %u\n", irq);
2724 goto out;
2725 }
2726
2727out:
2728 irq_put_desc_unlock(desc, flags);
2729 return ret;
2730}
2731
2732/**
2733 * teardown_percpu_nmi - undoes NMI setup of IRQ line
2734 * @irq: Interrupt line from which CPU local NMI configuration should be
2735 * removed
2736 *
2737 * This call undoes the setup done by prepare_percpu_nmi().
2738 *
2739 * IRQ line should not be enabled for the current CPU.
2740 *
2741 * As a CPU local operation, this should be called from non-preemptible
2742 * context.
2743 */
2744void teardown_percpu_nmi(unsigned int irq)
2745{
2746 unsigned long flags;
2747 struct irq_desc *desc;
2748
2749 WARN_ON(preemptible());
2750
2751 desc = irq_get_desc_lock(irq, &flags,
2752 IRQ_GET_DESC_CHECK_PERCPU);
2753 if (!desc)
2754 return;
2755
2756 if (WARN_ON(!(desc->istate & IRQS_NMI)))
2757 goto out;
2758
2759 irq_nmi_teardown(desc);
2760out:
2761 irq_put_desc_unlock(desc, flags);
2762}
2763
2764int __irq_get_irqchip_state(struct irq_data *data, enum irqchip_irq_state which,
2765 bool *state)
2766{
2767 struct irq_chip *chip;
2768 int err = -EINVAL;
2769
2770 do {
2771 chip = irq_data_get_irq_chip(data);
2772 if (WARN_ON_ONCE(!chip))
2773 return -ENODEV;
2774 if (chip->irq_get_irqchip_state)
2775 break;
2776#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2777 data = data->parent_data;
2778#else
2779 data = NULL;
2780#endif
2781 } while (data);
2782
2783 if (data)
2784 err = chip->irq_get_irqchip_state(data, which, state);
2785 return err;
2786}
2787
2788/**
2789 * irq_get_irqchip_state - returns the irqchip state of a interrupt.
2790 * @irq: Interrupt line that is forwarded to a VM
2791 * @which: One of IRQCHIP_STATE_* the caller wants to know about
2792 * @state: a pointer to a boolean where the state is to be stored
2793 *
2794 * This call snapshots the internal irqchip state of an
2795 * interrupt, returning into @state the bit corresponding to
2796 * stage @which
2797 *
2798 * This function should be called with preemption disabled if the
2799 * interrupt controller has per-cpu registers.
2800 */
2801int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2802 bool *state)
2803{
2804 struct irq_desc *desc;
2805 struct irq_data *data;
2806 unsigned long flags;
2807 int err = -EINVAL;
2808
2809 desc = irq_get_desc_buslock(irq, &flags, 0);
2810 if (!desc)
2811 return err;
2812
2813 data = irq_desc_get_irq_data(desc);
2814
2815 err = __irq_get_irqchip_state(data, which, state);
2816
2817 irq_put_desc_busunlock(desc, flags);
2818 return err;
2819}
2820EXPORT_SYMBOL_GPL(irq_get_irqchip_state);
2821
2822/**
2823 * irq_set_irqchip_state - set the state of a forwarded interrupt.
2824 * @irq: Interrupt line that is forwarded to a VM
2825 * @which: State to be restored (one of IRQCHIP_STATE_*)
2826 * @val: Value corresponding to @which
2827 *
2828 * This call sets the internal irqchip state of an interrupt,
2829 * depending on the value of @which.
2830 *
2831 * This function should be called with preemption disabled if the
2832 * interrupt controller has per-cpu registers.
2833 */
2834int irq_set_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2835 bool val)
2836{
2837 struct irq_desc *desc;
2838 struct irq_data *data;
2839 struct irq_chip *chip;
2840 unsigned long flags;
2841 int err = -EINVAL;
2842
2843 desc = irq_get_desc_buslock(irq, &flags, 0);
2844 if (!desc)
2845 return err;
2846
2847 data = irq_desc_get_irq_data(desc);
2848
2849 do {
2850 chip = irq_data_get_irq_chip(data);
2851 if (WARN_ON_ONCE(!chip)) {
2852 err = -ENODEV;
2853 goto out_unlock;
2854 }
2855 if (chip->irq_set_irqchip_state)
2856 break;
2857#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2858 data = data->parent_data;
2859#else
2860 data = NULL;
2861#endif
2862 } while (data);
2863
2864 if (data)
2865 err = chip->irq_set_irqchip_state(data, which, val);
2866
2867out_unlock:
2868 irq_put_desc_busunlock(desc, flags);
2869 return err;
2870}
2871EXPORT_SYMBOL_GPL(irq_set_irqchip_state);
2872
2873/**
2874 * irq_has_action - Check whether an interrupt is requested
2875 * @irq: The linux irq number
2876 *
2877 * Returns: A snapshot of the current state
2878 */
2879bool irq_has_action(unsigned int irq)
2880{
2881 bool res;
2882
2883 rcu_read_lock();
2884 res = irq_desc_has_action(irq_to_desc(irq));
2885 rcu_read_unlock();
2886 return res;
2887}
2888EXPORT_SYMBOL_GPL(irq_has_action);
2889
2890/**
2891 * irq_check_status_bit - Check whether bits in the irq descriptor status are set
2892 * @irq: The linux irq number
2893 * @bitmask: The bitmask to evaluate
2894 *
2895 * Returns: True if one of the bits in @bitmask is set
2896 */
2897bool irq_check_status_bit(unsigned int irq, unsigned int bitmask)
2898{
2899 struct irq_desc *desc;
2900 bool res = false;
2901
2902 rcu_read_lock();
2903 desc = irq_to_desc(irq);
2904 if (desc)
2905 res = !!(desc->status_use_accessors & bitmask);
2906 rcu_read_unlock();
2907 return res;
2908}
2909EXPORT_SYMBOL_GPL(irq_check_status_bit);