Linux Audio

Check our new training course

Loading...
v6.8
  1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  2/*
  3 * platform.c - DesignWare HS OTG Controller platform driver
  4 *
  5 * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  6 */
  7
  8#include <linux/kernel.h>
  9#include <linux/module.h>
 10#include <linux/slab.h>
 11#include <linux/clk.h>
 12#include <linux/device.h>
 13#include <linux/dma-mapping.h>
 14#include <linux/of.h>
 15#include <linux/mutex.h>
 16#include <linux/platform_device.h>
 17#include <linux/phy/phy.h>
 18#include <linux/platform_data/s3c-hsotg.h>
 19#include <linux/reset.h>
 20
 21#include <linux/usb/of.h>
 22
 23#include "core.h"
 24#include "hcd.h"
 25#include "debug.h"
 26
 27static const char dwc2_driver_name[] = "dwc2";
 28
 29/*
 30 * Check the dr_mode against the module configuration and hardware
 31 * capabilities.
 32 *
 33 * The hardware, module, and dr_mode, can each be set to host, device,
 34 * or otg. Check that all these values are compatible and adjust the
 35 * value of dr_mode if possible.
 36 *
 37 *                      actual
 38 *    HW  MOD dr_mode   dr_mode
 39 *  ------------------------------
 40 *   HST  HST  any    :  HST
 41 *   HST  DEV  any    :  ---
 42 *   HST  OTG  any    :  HST
 43 *
 44 *   DEV  HST  any    :  ---
 45 *   DEV  DEV  any    :  DEV
 46 *   DEV  OTG  any    :  DEV
 47 *
 48 *   OTG  HST  any    :  HST
 49 *   OTG  DEV  any    :  DEV
 50 *   OTG  OTG  any    :  dr_mode
 51 */
 52static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
 53{
 54	enum usb_dr_mode mode;
 55
 56	hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
 57	if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
 58		hsotg->dr_mode = USB_DR_MODE_OTG;
 59
 60	mode = hsotg->dr_mode;
 61
 62	if (dwc2_hw_is_device(hsotg)) {
 63		if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
 64			dev_err(hsotg->dev,
 65				"Controller does not support host mode.\n");
 66			return -EINVAL;
 67		}
 68		mode = USB_DR_MODE_PERIPHERAL;
 69	} else if (dwc2_hw_is_host(hsotg)) {
 70		if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
 71			dev_err(hsotg->dev,
 72				"Controller does not support device mode.\n");
 73			return -EINVAL;
 74		}
 75		mode = USB_DR_MODE_HOST;
 76	} else {
 77		if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
 78			mode = USB_DR_MODE_HOST;
 79		else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
 80			mode = USB_DR_MODE_PERIPHERAL;
 81	}
 82
 83	if (mode != hsotg->dr_mode) {
 84		dev_warn(hsotg->dev,
 85			 "Configuration mismatch. dr_mode forced to %s\n",
 86			mode == USB_DR_MODE_HOST ? "host" : "device");
 87
 88		hsotg->dr_mode = mode;
 89	}
 90
 91	return 0;
 92}
 93
 
 
 
 
 
 
 
 94static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
 95{
 96	struct platform_device *pdev = to_platform_device(hsotg->dev);
 97	int ret;
 98
 99	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
100				    hsotg->supplies);
101	if (ret)
102		return ret;
103
104	if (hsotg->utmi_clk) {
105		ret = clk_prepare_enable(hsotg->utmi_clk);
106		if (ret)
107			goto err_dis_reg;
108	}
109
110	if (hsotg->clk) {
111		ret = clk_prepare_enable(hsotg->clk);
112		if (ret)
113			goto err_dis_utmi_clk;
114	}
115
116	if (hsotg->uphy) {
117		ret = usb_phy_init(hsotg->uphy);
118	} else if (hsotg->plat && hsotg->plat->phy_init) {
119		ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
120	} else {
121		ret = phy_init(hsotg->phy);
122		if (ret == 0) {
123			ret = phy_power_on(hsotg->phy);
124			if (ret)
125				phy_exit(hsotg->phy);
126		}
127	}
128
129	if (ret)
130		goto err_dis_clk;
131
132	return 0;
133
134err_dis_clk:
135	if (hsotg->clk)
136		clk_disable_unprepare(hsotg->clk);
137
138err_dis_utmi_clk:
139	if (hsotg->utmi_clk)
140		clk_disable_unprepare(hsotg->utmi_clk);
141
142err_dis_reg:
143	regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
144
145	return ret;
146}
147
148/**
149 * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
150 * @hsotg: The driver state
151 *
152 * A wrapper for platform code responsible for controlling
153 * low-level USB platform resources (phy, clock, regulators)
154 */
155int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
156{
157	int ret = __dwc2_lowlevel_hw_enable(hsotg);
158
159	if (ret == 0)
160		hsotg->ll_hw_enabled = true;
161	return ret;
162}
163
164static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
165{
166	struct platform_device *pdev = to_platform_device(hsotg->dev);
167	int ret = 0;
168
169	if (hsotg->uphy) {
170		usb_phy_shutdown(hsotg->uphy);
171	} else if (hsotg->plat && hsotg->plat->phy_exit) {
172		ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
173	} else {
174		ret = phy_power_off(hsotg->phy);
175		if (ret == 0)
176			ret = phy_exit(hsotg->phy);
177	}
178	if (ret)
179		return ret;
180
181	if (hsotg->clk)
182		clk_disable_unprepare(hsotg->clk);
183
184	if (hsotg->utmi_clk)
185		clk_disable_unprepare(hsotg->utmi_clk);
186
187	return regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
188}
189
190/**
191 * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
192 * @hsotg: The driver state
193 *
194 * A wrapper for platform code responsible for controlling
195 * low-level USB platform resources (phy, clock, regulators)
196 */
197int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
198{
199	int ret = __dwc2_lowlevel_hw_disable(hsotg);
200
201	if (ret == 0)
202		hsotg->ll_hw_enabled = false;
203	return ret;
204}
205
206static void dwc2_reset_control_assert(void *data)
207{
208	reset_control_assert(data);
209}
210
211static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
212{
213	int i, ret;
214
215	hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2");
216	if (IS_ERR(hsotg->reset))
217		return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset),
218				     "error getting reset control\n");
 
 
219
220	reset_control_deassert(hsotg->reset);
221	ret = devm_add_action_or_reset(hsotg->dev, dwc2_reset_control_assert,
222				       hsotg->reset);
223	if (ret)
224		return ret;
225
226	hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc");
227	if (IS_ERR(hsotg->reset_ecc))
228		return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset_ecc),
229				     "error getting reset control for ecc\n");
 
 
230
231	reset_control_deassert(hsotg->reset_ecc);
232	ret = devm_add_action_or_reset(hsotg->dev, dwc2_reset_control_assert,
233				       hsotg->reset_ecc);
234	if (ret)
235		return ret;
236
237	/*
238	 * Attempt to find a generic PHY, then look for an old style
239	 * USB PHY and then fall back to pdata
240	 */
241	hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
242	if (IS_ERR(hsotg->phy)) {
243		ret = PTR_ERR(hsotg->phy);
244		switch (ret) {
245		case -ENODEV:
246		case -ENOSYS:
247			hsotg->phy = NULL;
248			break;
 
 
249		default:
250			return dev_err_probe(hsotg->dev, ret, "error getting phy\n");
 
251		}
252	}
253
254	if (!hsotg->phy) {
255		hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
256		if (IS_ERR(hsotg->uphy)) {
257			ret = PTR_ERR(hsotg->uphy);
258			switch (ret) {
259			case -ENODEV:
260			case -ENXIO:
261				hsotg->uphy = NULL;
262				break;
 
 
263			default:
264				return dev_err_probe(hsotg->dev, ret, "error getting usb phy\n");
 
 
265			}
266		}
267	}
268
269	hsotg->plat = dev_get_platdata(hsotg->dev);
270
271	/* Clock */
272	hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg");
273	if (IS_ERR(hsotg->clk))
274		return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->clk), "cannot get otg clock\n");
275
276	hsotg->utmi_clk = devm_clk_get_optional(hsotg->dev, "utmi");
277	if (IS_ERR(hsotg->utmi_clk))
278		return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->utmi_clk),
279				     "cannot get utmi clock\n");
280
281	/* Regulators */
282	for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
283		hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
284
285	ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
286				      hsotg->supplies);
287	if (ret)
288		return dev_err_probe(hsotg->dev, ret, "failed to request supplies\n");
289
 
 
 
290	return 0;
291}
292
293/**
294 * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
295 * DWC_otg driver
296 *
297 * @dev: Platform device
298 *
299 * This routine is called, for example, when the rmmod command is executed. The
300 * device may or may not be electrically present. If it is present, the driver
301 * stops device processing. Any resources used on behalf of this device are
302 * freed.
303 */
304static void dwc2_driver_remove(struct platform_device *dev)
305{
306	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
307	struct dwc2_gregs_backup *gr;
308	int ret = 0;
309
310	gr = &hsotg->gr_backup;
311
312	/* Exit Hibernation when driver is removed. */
313	if (hsotg->hibernated) {
314		if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
315			ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
316		else
317			ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
318
319		if (ret)
320			dev_err(hsotg->dev,
321				"exit hibernation failed.\n");
322	}
323
324	/* Exit Partial Power Down when driver is removed. */
325	if (hsotg->in_ppd) {
326		ret = dwc2_exit_partial_power_down(hsotg, 0, true);
327		if (ret)
328			dev_err(hsotg->dev,
329				"exit partial_power_down failed\n");
330	}
331
332	/* Exit clock gating when driver is removed. */
333	if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE &&
334	    hsotg->bus_suspended) {
335		if (dwc2_is_device_mode(hsotg))
336			dwc2_gadget_exit_clock_gating(hsotg, 0);
337		else
338			dwc2_host_exit_clock_gating(hsotg, 0);
339	}
340
341	dwc2_debugfs_exit(hsotg);
342	if (hsotg->hcd_enabled)
343		dwc2_hcd_remove(hsotg);
344	if (hsotg->gadget_enabled)
345		dwc2_hsotg_remove(hsotg);
346
347	dwc2_drd_exit(hsotg);
348
349	if (hsotg->params.activate_stm_id_vb_detection)
350		regulator_disable(hsotg->usb33d);
351
352	if (hsotg->ll_hw_enabled)
353		dwc2_lowlevel_hw_disable(hsotg);
 
 
 
 
 
354}
355
356/**
357 * dwc2_driver_shutdown() - Called on device shutdown
358 *
359 * @dev: Platform device
360 *
361 * In specific conditions (involving usb hubs) dwc2 devices can create a
362 * lot of interrupts, even to the point of overwhelming devices running
363 * at low frequencies. Some devices need to do special clock handling
364 * at shutdown-time which may bring the system clock below the threshold
365 * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs
366 * prevents reboots/poweroffs from getting stuck in such cases.
367 */
368static void dwc2_driver_shutdown(struct platform_device *dev)
369{
370	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
371
372	dwc2_disable_global_interrupts(hsotg);
373	synchronize_irq(hsotg->irq);
374}
375
376/**
377 * dwc2_check_core_endianness() - Returns true if core and AHB have
378 * opposite endianness.
379 * @hsotg:	Programming view of the DWC_otg controller.
380 */
381static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg)
382{
383	u32 snpsid;
384
385	snpsid = ioread32(hsotg->regs + GSNPSID);
386	if ((snpsid & GSNPSID_ID_MASK) == DWC2_OTG_ID ||
387	    (snpsid & GSNPSID_ID_MASK) == DWC2_FS_IOT_ID ||
388	    (snpsid & GSNPSID_ID_MASK) == DWC2_HS_IOT_ID)
389		return false;
390	return true;
391}
392
393/**
394 * dwc2_check_core_version() - Check core version
395 *
396 * @hsotg: Programming view of the DWC_otg controller
397 *
398 */
399int dwc2_check_core_version(struct dwc2_hsotg *hsotg)
400{
401	struct dwc2_hw_params *hw = &hsotg->hw_params;
402
403	/*
404	 * Attempt to ensure this device is really a DWC_otg Controller.
405	 * Read and verify the GSNPSID register contents. The value should be
406	 * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx
407	 */
408
409	hw->snpsid = dwc2_readl(hsotg, GSNPSID);
410	if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID &&
411	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID &&
412	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) {
413		dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n",
414			hw->snpsid);
415		return -ENODEV;
416	}
417
418	dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n",
419		hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
420		hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
421	return 0;
422}
423
424/**
425 * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
426 * driver
427 *
428 * @dev: Platform device
429 *
430 * This routine creates the driver components required to control the device
431 * (core, HCD, and PCD) and initializes the device. The driver components are
432 * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
433 * in the device private data. This allows the driver to access the dwc2_hsotg
434 * structure on subsequent calls to driver methods for this device.
435 */
436static int dwc2_driver_probe(struct platform_device *dev)
437{
438	struct dwc2_hsotg *hsotg;
439	struct resource *res;
440	int retval;
441
442	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
443	if (!hsotg)
444		return -ENOMEM;
445
446	hsotg->dev = &dev->dev;
447
448	/*
449	 * Use reasonable defaults so platforms don't have to provide these.
450	 */
451	if (!dev->dev.dma_mask)
452		dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
453	retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
454	if (retval) {
455		dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval);
456		return retval;
457	}
458
459	hsotg->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res);
460	if (IS_ERR(hsotg->regs))
461		return PTR_ERR(hsotg->regs);
462
463	dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
464		(unsigned long)res->start, hsotg->regs);
465
466	retval = dwc2_lowlevel_hw_init(hsotg);
467	if (retval)
468		return retval;
469
470	spin_lock_init(&hsotg->lock);
471
472	hsotg->irq = platform_get_irq(dev, 0);
473	if (hsotg->irq < 0)
474		return hsotg->irq;
475
476	dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
477		hsotg->irq);
478	retval = devm_request_irq(hsotg->dev, hsotg->irq,
479				  dwc2_handle_common_intr, IRQF_SHARED,
480				  dev_name(hsotg->dev), hsotg);
481	if (retval)
482		return retval;
483
484	hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus");
485	if (IS_ERR(hsotg->vbus_supply)) {
486		retval = PTR_ERR(hsotg->vbus_supply);
487		hsotg->vbus_supply = NULL;
488		if (retval != -ENODEV)
489			return retval;
490	}
491
492	retval = dwc2_lowlevel_hw_enable(hsotg);
493	if (retval)
494		return retval;
495
496	hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
497
498	retval = dwc2_get_dr_mode(hsotg);
499	if (retval)
500		goto error;
501
502	hsotg->need_phy_for_wake =
503		of_property_read_bool(dev->dev.of_node,
504				      "snps,need-phy-for-wake");
505
506	/*
507	 * Before performing any core related operations
508	 * check core version.
509	 */
510	retval = dwc2_check_core_version(hsotg);
511	if (retval)
512		goto error;
513
514	/*
515	 * Reset before dwc2_get_hwparams() then it could get power-on real
516	 * reset value form registers.
517	 */
518	retval = dwc2_core_reset(hsotg, false);
519	if (retval)
520		goto error;
521
522	/* Detect config values from hardware */
523	retval = dwc2_get_hwparams(hsotg);
524	if (retval)
525		goto error;
526
527	/*
528	 * For OTG cores, set the force mode bits to reflect the value
529	 * of dr_mode. Force mode bits should not be touched at any
530	 * other time after this.
531	 */
532	dwc2_force_dr_mode(hsotg);
533
534	retval = dwc2_init_params(hsotg);
535	if (retval)
536		goto error;
537
538	if (hsotg->params.activate_stm_id_vb_detection) {
539		u32 ggpio;
540
541		hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d");
542		if (IS_ERR(hsotg->usb33d)) {
543			retval = PTR_ERR(hsotg->usb33d);
544			dev_err_probe(hsotg->dev, retval, "failed to request usb33d supply\n");
 
 
 
545			goto error;
546		}
547		retval = regulator_enable(hsotg->usb33d);
548		if (retval) {
549			dev_err_probe(hsotg->dev, retval, "failed to enable usb33d supply\n");
 
550			goto error;
551		}
552
553		ggpio = dwc2_readl(hsotg, GGPIO);
554		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
555		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
556		dwc2_writel(hsotg, ggpio, GGPIO);
557
558		/* ID/VBUS detection startup time */
559		usleep_range(5000, 7000);
560	}
561
562	retval = dwc2_drd_init(hsotg);
563	if (retval) {
564		dev_err_probe(hsotg->dev, retval, "failed to initialize dual-role\n");
 
565		goto error_init;
566	}
567
568	if (hsotg->dr_mode != USB_DR_MODE_HOST) {
569		retval = dwc2_gadget_init(hsotg);
570		if (retval)
571			goto error_drd;
572		hsotg->gadget_enabled = 1;
573	}
574
575	/*
576	 * If we need PHY for wakeup we must be wakeup capable.
577	 * When we have a device that can wake without the PHY we
578	 * can adjust this condition.
579	 */
580	if (hsotg->need_phy_for_wake)
581		device_set_wakeup_capable(&dev->dev, true);
582
583	hsotg->reset_phy_on_wake =
584		of_property_read_bool(dev->dev.of_node,
585				      "snps,reset-phy-on-wake");
586	if (hsotg->reset_phy_on_wake && !hsotg->phy) {
587		dev_warn(hsotg->dev,
588			 "Quirk reset-phy-on-wake only supports generic PHYs\n");
589		hsotg->reset_phy_on_wake = false;
590	}
591
592	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
593		retval = dwc2_hcd_init(hsotg);
594		if (retval) {
595			if (hsotg->gadget_enabled)
596				dwc2_hsotg_remove(hsotg);
597			goto error_drd;
598		}
599		hsotg->hcd_enabled = 1;
600	}
601
602	platform_set_drvdata(dev, hsotg);
603	hsotg->hibernated = 0;
604
605	dwc2_debugfs_init(hsotg);
606
607	/* Gadget code manages lowlevel hw on its own */
608	if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
609		dwc2_lowlevel_hw_disable(hsotg);
610
611#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
612	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
613	/* Postponed adding a new gadget to the udc class driver list */
614	if (hsotg->gadget_enabled) {
615		retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget);
616		if (retval) {
617			hsotg->gadget.udc = NULL;
618			dwc2_hsotg_remove(hsotg);
619			goto error_debugfs;
620		}
621	}
622#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
623	return 0;
624
625#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
626	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
627error_debugfs:
628	dwc2_debugfs_exit(hsotg);
629	if (hsotg->hcd_enabled)
630		dwc2_hcd_remove(hsotg);
631#endif
632error_drd:
633	dwc2_drd_exit(hsotg);
634
635error_init:
636	if (hsotg->params.activate_stm_id_vb_detection)
637		regulator_disable(hsotg->usb33d);
638error:
639	if (hsotg->ll_hw_enabled)
640		dwc2_lowlevel_hw_disable(hsotg);
641	return retval;
642}
643
644static int __maybe_unused dwc2_suspend(struct device *dev)
645{
646	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
647	bool is_device_mode = dwc2_is_device_mode(dwc2);
648	int ret = 0;
649
650	if (is_device_mode)
651		dwc2_hsotg_suspend(dwc2);
652
653	dwc2_drd_suspend(dwc2);
654
655	if (dwc2->params.activate_stm_id_vb_detection) {
656		unsigned long flags;
657		u32 ggpio, gotgctl;
658
659		/*
660		 * Need to force the mode to the current mode to avoid Mode
661		 * Mismatch Interrupt when ID detection will be disabled.
662		 */
663		dwc2_force_mode(dwc2, !is_device_mode);
664
665		spin_lock_irqsave(&dwc2->lock, flags);
666		gotgctl = dwc2_readl(dwc2, GOTGCTL);
667		/* bypass debounce filter, enable overrides */
668		gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
669		gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN;
670		/* Force A / B session if needed */
671		if (gotgctl & GOTGCTL_ASESVLD)
672			gotgctl |= GOTGCTL_AVALOVAL;
673		if (gotgctl & GOTGCTL_BSESVLD)
674			gotgctl |= GOTGCTL_BVALOVAL;
675		dwc2_writel(dwc2, gotgctl, GOTGCTL);
676		spin_unlock_irqrestore(&dwc2->lock, flags);
677
678		ggpio = dwc2_readl(dwc2, GGPIO);
679		ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN;
680		ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN;
681		dwc2_writel(dwc2, ggpio, GGPIO);
682
683		regulator_disable(dwc2->usb33d);
684	}
685
686	if (dwc2->ll_hw_enabled &&
687	    (is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) {
688		ret = __dwc2_lowlevel_hw_disable(dwc2);
689		dwc2->phy_off_for_suspend = true;
690	}
691
692	return ret;
693}
694
695static int __maybe_unused dwc2_resume(struct device *dev)
696{
697	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
698	int ret = 0;
699
700	if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) {
701		ret = __dwc2_lowlevel_hw_enable(dwc2);
702		if (ret)
703			return ret;
704	}
705	dwc2->phy_off_for_suspend = false;
706
707	if (dwc2->params.activate_stm_id_vb_detection) {
708		unsigned long flags;
709		u32 ggpio, gotgctl;
710
711		ret = regulator_enable(dwc2->usb33d);
712		if (ret)
713			return ret;
714
715		ggpio = dwc2_readl(dwc2, GGPIO);
716		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
717		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
718		dwc2_writel(dwc2, ggpio, GGPIO);
719
720		/* ID/VBUS detection startup time */
721		usleep_range(5000, 7000);
722
723		spin_lock_irqsave(&dwc2->lock, flags);
724		gotgctl = dwc2_readl(dwc2, GOTGCTL);
725		gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS;
726		gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN |
727			     GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL);
728		dwc2_writel(dwc2, gotgctl, GOTGCTL);
729		spin_unlock_irqrestore(&dwc2->lock, flags);
730	}
731
732	if (!dwc2->role_sw) {
733		/* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
734		dwc2_force_dr_mode(dwc2);
735	} else {
736		dwc2_drd_resume(dwc2);
737	}
738
739	if (dwc2_is_device_mode(dwc2))
740		ret = dwc2_hsotg_resume(dwc2);
741
742	return ret;
743}
744
745static const struct dev_pm_ops dwc2_dev_pm_ops = {
746	SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
747};
748
749static struct platform_driver dwc2_platform_driver = {
750	.driver = {
751		.name = dwc2_driver_name,
752		.of_match_table = dwc2_of_match_table,
753		.acpi_match_table = ACPI_PTR(dwc2_acpi_match),
754		.pm = &dwc2_dev_pm_ops,
755	},
756	.probe = dwc2_driver_probe,
757	.remove_new = dwc2_driver_remove,
758	.shutdown = dwc2_driver_shutdown,
759};
760
761module_platform_driver(dwc2_platform_driver);
v5.14.15
  1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  2/*
  3 * platform.c - DesignWare HS OTG Controller platform driver
  4 *
  5 * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
  6 *
  7 * Redistribution and use in source and binary forms, with or without
  8 * modification, are permitted provided that the following conditions
  9 * are met:
 10 * 1. Redistributions of source code must retain the above copyright
 11 *    notice, this list of conditions, and the following disclaimer,
 12 *    without modification.
 13 * 2. Redistributions in binary form must reproduce the above copyright
 14 *    notice, this list of conditions and the following disclaimer in the
 15 *    documentation and/or other materials provided with the distribution.
 16 * 3. The names of the above-listed copyright holders may not be used
 17 *    to endorse or promote products derived from this software without
 18 *    specific prior written permission.
 19 *
 20 * ALTERNATIVELY, this software may be distributed under the terms of the
 21 * GNU General Public License ("GPL") as published by the Free Software
 22 * Foundation; either version 2 of the License, or (at your option) any
 23 * later version.
 24 *
 25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
 26 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 27 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 29 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 30 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 31 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 32 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 33 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 34 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 35 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 36 */
 37
 38#include <linux/kernel.h>
 39#include <linux/module.h>
 40#include <linux/slab.h>
 41#include <linux/clk.h>
 42#include <linux/device.h>
 43#include <linux/dma-mapping.h>
 44#include <linux/of_device.h>
 45#include <linux/mutex.h>
 46#include <linux/platform_device.h>
 47#include <linux/phy/phy.h>
 48#include <linux/platform_data/s3c-hsotg.h>
 49#include <linux/reset.h>
 50
 51#include <linux/usb/of.h>
 52
 53#include "core.h"
 54#include "hcd.h"
 55#include "debug.h"
 56
 57static const char dwc2_driver_name[] = "dwc2";
 58
 59/*
 60 * Check the dr_mode against the module configuration and hardware
 61 * capabilities.
 62 *
 63 * The hardware, module, and dr_mode, can each be set to host, device,
 64 * or otg. Check that all these values are compatible and adjust the
 65 * value of dr_mode if possible.
 66 *
 67 *                      actual
 68 *    HW  MOD dr_mode   dr_mode
 69 *  ------------------------------
 70 *   HST  HST  any    :  HST
 71 *   HST  DEV  any    :  ---
 72 *   HST  OTG  any    :  HST
 73 *
 74 *   DEV  HST  any    :  ---
 75 *   DEV  DEV  any    :  DEV
 76 *   DEV  OTG  any    :  DEV
 77 *
 78 *   OTG  HST  any    :  HST
 79 *   OTG  DEV  any    :  DEV
 80 *   OTG  OTG  any    :  dr_mode
 81 */
 82static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
 83{
 84	enum usb_dr_mode mode;
 85
 86	hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
 87	if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
 88		hsotg->dr_mode = USB_DR_MODE_OTG;
 89
 90	mode = hsotg->dr_mode;
 91
 92	if (dwc2_hw_is_device(hsotg)) {
 93		if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
 94			dev_err(hsotg->dev,
 95				"Controller does not support host mode.\n");
 96			return -EINVAL;
 97		}
 98		mode = USB_DR_MODE_PERIPHERAL;
 99	} else if (dwc2_hw_is_host(hsotg)) {
100		if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
101			dev_err(hsotg->dev,
102				"Controller does not support device mode.\n");
103			return -EINVAL;
104		}
105		mode = USB_DR_MODE_HOST;
106	} else {
107		if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
108			mode = USB_DR_MODE_HOST;
109		else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
110			mode = USB_DR_MODE_PERIPHERAL;
111	}
112
113	if (mode != hsotg->dr_mode) {
114		dev_warn(hsotg->dev,
115			 "Configuration mismatch. dr_mode forced to %s\n",
116			mode == USB_DR_MODE_HOST ? "host" : "device");
117
118		hsotg->dr_mode = mode;
119	}
120
121	return 0;
122}
123
124static void __dwc2_disable_regulators(void *data)
125{
126	struct dwc2_hsotg *hsotg = data;
127
128	regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
129}
130
131static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
132{
133	struct platform_device *pdev = to_platform_device(hsotg->dev);
134	int ret;
135
136	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
137				    hsotg->supplies);
138	if (ret)
139		return ret;
140
141	ret = devm_add_action_or_reset(&pdev->dev,
142				       __dwc2_disable_regulators, hsotg);
143	if (ret)
144		return ret;
 
145
146	if (hsotg->clk) {
147		ret = clk_prepare_enable(hsotg->clk);
148		if (ret)
149			return ret;
150	}
151
152	if (hsotg->uphy) {
153		ret = usb_phy_init(hsotg->uphy);
154	} else if (hsotg->plat && hsotg->plat->phy_init) {
155		ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
156	} else {
157		ret = phy_power_on(hsotg->phy);
158		if (ret == 0)
159			ret = phy_init(hsotg->phy);
 
 
 
160	}
161
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
162	return ret;
163}
164
165/**
166 * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
167 * @hsotg: The driver state
168 *
169 * A wrapper for platform code responsible for controlling
170 * low-level USB platform resources (phy, clock, regulators)
171 */
172int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
173{
174	int ret = __dwc2_lowlevel_hw_enable(hsotg);
175
176	if (ret == 0)
177		hsotg->ll_hw_enabled = true;
178	return ret;
179}
180
181static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
182{
183	struct platform_device *pdev = to_platform_device(hsotg->dev);
184	int ret = 0;
185
186	if (hsotg->uphy) {
187		usb_phy_shutdown(hsotg->uphy);
188	} else if (hsotg->plat && hsotg->plat->phy_exit) {
189		ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
190	} else {
191		ret = phy_exit(hsotg->phy);
192		if (ret == 0)
193			ret = phy_power_off(hsotg->phy);
194	}
195	if (ret)
196		return ret;
197
198	if (hsotg->clk)
199		clk_disable_unprepare(hsotg->clk);
200
201	return 0;
 
 
 
202}
203
204/**
205 * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
206 * @hsotg: The driver state
207 *
208 * A wrapper for platform code responsible for controlling
209 * low-level USB platform resources (phy, clock, regulators)
210 */
211int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
212{
213	int ret = __dwc2_lowlevel_hw_disable(hsotg);
214
215	if (ret == 0)
216		hsotg->ll_hw_enabled = false;
217	return ret;
218}
219
 
 
 
 
 
220static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
221{
222	int i, ret;
223
224	hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2");
225	if (IS_ERR(hsotg->reset)) {
226		ret = PTR_ERR(hsotg->reset);
227		dev_err(hsotg->dev, "error getting reset control %d\n", ret);
228		return ret;
229	}
230
231	reset_control_deassert(hsotg->reset);
 
 
 
 
232
233	hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc");
234	if (IS_ERR(hsotg->reset_ecc)) {
235		ret = PTR_ERR(hsotg->reset_ecc);
236		dev_err(hsotg->dev, "error getting reset control for ecc %d\n", ret);
237		return ret;
238	}
239
240	reset_control_deassert(hsotg->reset_ecc);
 
 
 
 
241
242	/*
243	 * Attempt to find a generic PHY, then look for an old style
244	 * USB PHY and then fall back to pdata
245	 */
246	hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
247	if (IS_ERR(hsotg->phy)) {
248		ret = PTR_ERR(hsotg->phy);
249		switch (ret) {
250		case -ENODEV:
251		case -ENOSYS:
252			hsotg->phy = NULL;
253			break;
254		case -EPROBE_DEFER:
255			return ret;
256		default:
257			dev_err(hsotg->dev, "error getting phy %d\n", ret);
258			return ret;
259		}
260	}
261
262	if (!hsotg->phy) {
263		hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
264		if (IS_ERR(hsotg->uphy)) {
265			ret = PTR_ERR(hsotg->uphy);
266			switch (ret) {
267			case -ENODEV:
268			case -ENXIO:
269				hsotg->uphy = NULL;
270				break;
271			case -EPROBE_DEFER:
272				return ret;
273			default:
274				dev_err(hsotg->dev, "error getting usb phy %d\n",
275					ret);
276				return ret;
277			}
278		}
279	}
280
281	hsotg->plat = dev_get_platdata(hsotg->dev);
282
283	/* Clock */
284	hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg");
285	if (IS_ERR(hsotg->clk)) {
286		dev_err(hsotg->dev, "cannot get otg clock\n");
287		return PTR_ERR(hsotg->clk);
288	}
 
 
 
289
290	/* Regulators */
291	for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
292		hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
293
294	ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
295				      hsotg->supplies);
296	if (ret) {
297		if (ret != -EPROBE_DEFER)
298			dev_err(hsotg->dev, "failed to request supplies: %d\n",
299				ret);
300		return ret;
301	}
302	return 0;
303}
304
305/**
306 * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
307 * DWC_otg driver
308 *
309 * @dev: Platform device
310 *
311 * This routine is called, for example, when the rmmod command is executed. The
312 * device may or may not be electrically present. If it is present, the driver
313 * stops device processing. Any resources used on behalf of this device are
314 * freed.
315 */
316static int dwc2_driver_remove(struct platform_device *dev)
317{
318	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
319	struct dwc2_gregs_backup *gr;
320	int ret = 0;
321
322	gr = &hsotg->gr_backup;
323
324	/* Exit Hibernation when driver is removed. */
325	if (hsotg->hibernated) {
326		if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
327			ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
328		else
329			ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
330
331		if (ret)
332			dev_err(hsotg->dev,
333				"exit hibernation failed.\n");
334	}
335
336	/* Exit Partial Power Down when driver is removed. */
337	if (hsotg->in_ppd) {
338		ret = dwc2_exit_partial_power_down(hsotg, 0, true);
339		if (ret)
340			dev_err(hsotg->dev,
341				"exit partial_power_down failed\n");
342	}
343
344	/* Exit clock gating when driver is removed. */
345	if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE &&
346	    hsotg->bus_suspended) {
347		if (dwc2_is_device_mode(hsotg))
348			dwc2_gadget_exit_clock_gating(hsotg, 0);
349		else
350			dwc2_host_exit_clock_gating(hsotg, 0);
351	}
352
353	dwc2_debugfs_exit(hsotg);
354	if (hsotg->hcd_enabled)
355		dwc2_hcd_remove(hsotg);
356	if (hsotg->gadget_enabled)
357		dwc2_hsotg_remove(hsotg);
358
359	dwc2_drd_exit(hsotg);
360
361	if (hsotg->params.activate_stm_id_vb_detection)
362		regulator_disable(hsotg->usb33d);
363
364	if (hsotg->ll_hw_enabled)
365		dwc2_lowlevel_hw_disable(hsotg);
366
367	reset_control_assert(hsotg->reset);
368	reset_control_assert(hsotg->reset_ecc);
369
370	return ret;
371}
372
373/**
374 * dwc2_driver_shutdown() - Called on device shutdown
375 *
376 * @dev: Platform device
377 *
378 * In specific conditions (involving usb hubs) dwc2 devices can create a
379 * lot of interrupts, even to the point of overwhelming devices running
380 * at low frequencies. Some devices need to do special clock handling
381 * at shutdown-time which may bring the system clock below the threshold
382 * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs
383 * prevents reboots/poweroffs from getting stuck in such cases.
384 */
385static void dwc2_driver_shutdown(struct platform_device *dev)
386{
387	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
388
389	dwc2_disable_global_interrupts(hsotg);
390	synchronize_irq(hsotg->irq);
391}
392
393/**
394 * dwc2_check_core_endianness() - Returns true if core and AHB have
395 * opposite endianness.
396 * @hsotg:	Programming view of the DWC_otg controller.
397 */
398static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg)
399{
400	u32 snpsid;
401
402	snpsid = ioread32(hsotg->regs + GSNPSID);
403	if ((snpsid & GSNPSID_ID_MASK) == DWC2_OTG_ID ||
404	    (snpsid & GSNPSID_ID_MASK) == DWC2_FS_IOT_ID ||
405	    (snpsid & GSNPSID_ID_MASK) == DWC2_HS_IOT_ID)
406		return false;
407	return true;
408}
409
410/**
411 * dwc2_check_core_version() - Check core version
412 *
413 * @hsotg: Programming view of the DWC_otg controller
414 *
415 */
416int dwc2_check_core_version(struct dwc2_hsotg *hsotg)
417{
418	struct dwc2_hw_params *hw = &hsotg->hw_params;
419
420	/*
421	 * Attempt to ensure this device is really a DWC_otg Controller.
422	 * Read and verify the GSNPSID register contents. The value should be
423	 * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx
424	 */
425
426	hw->snpsid = dwc2_readl(hsotg, GSNPSID);
427	if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID &&
428	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID &&
429	    (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) {
430		dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n",
431			hw->snpsid);
432		return -ENODEV;
433	}
434
435	dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n",
436		hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
437		hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
438	return 0;
439}
440
441/**
442 * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
443 * driver
444 *
445 * @dev: Platform device
446 *
447 * This routine creates the driver components required to control the device
448 * (core, HCD, and PCD) and initializes the device. The driver components are
449 * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
450 * in the device private data. This allows the driver to access the dwc2_hsotg
451 * structure on subsequent calls to driver methods for this device.
452 */
453static int dwc2_driver_probe(struct platform_device *dev)
454{
455	struct dwc2_hsotg *hsotg;
456	struct resource *res;
457	int retval;
458
459	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
460	if (!hsotg)
461		return -ENOMEM;
462
463	hsotg->dev = &dev->dev;
464
465	/*
466	 * Use reasonable defaults so platforms don't have to provide these.
467	 */
468	if (!dev->dev.dma_mask)
469		dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
470	retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
471	if (retval) {
472		dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval);
473		return retval;
474	}
475
476	hsotg->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res);
477	if (IS_ERR(hsotg->regs))
478		return PTR_ERR(hsotg->regs);
479
480	dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
481		(unsigned long)res->start, hsotg->regs);
482
483	retval = dwc2_lowlevel_hw_init(hsotg);
484	if (retval)
485		return retval;
486
487	spin_lock_init(&hsotg->lock);
488
489	hsotg->irq = platform_get_irq(dev, 0);
490	if (hsotg->irq < 0)
491		return hsotg->irq;
492
493	dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
494		hsotg->irq);
495	retval = devm_request_irq(hsotg->dev, hsotg->irq,
496				  dwc2_handle_common_intr, IRQF_SHARED,
497				  dev_name(hsotg->dev), hsotg);
498	if (retval)
499		return retval;
500
501	hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus");
502	if (IS_ERR(hsotg->vbus_supply)) {
503		retval = PTR_ERR(hsotg->vbus_supply);
504		hsotg->vbus_supply = NULL;
505		if (retval != -ENODEV)
506			return retval;
507	}
508
509	retval = dwc2_lowlevel_hw_enable(hsotg);
510	if (retval)
511		return retval;
512
513	hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
514
515	retval = dwc2_get_dr_mode(hsotg);
516	if (retval)
517		goto error;
518
519	hsotg->need_phy_for_wake =
520		of_property_read_bool(dev->dev.of_node,
521				      "snps,need-phy-for-wake");
522
523	/*
524	 * Before performing any core related operations
525	 * check core version.
526	 */
527	retval = dwc2_check_core_version(hsotg);
528	if (retval)
529		goto error;
530
531	/*
532	 * Reset before dwc2_get_hwparams() then it could get power-on real
533	 * reset value form registers.
534	 */
535	retval = dwc2_core_reset(hsotg, false);
536	if (retval)
537		goto error;
538
539	/* Detect config values from hardware */
540	retval = dwc2_get_hwparams(hsotg);
541	if (retval)
542		goto error;
543
544	/*
545	 * For OTG cores, set the force mode bits to reflect the value
546	 * of dr_mode. Force mode bits should not be touched at any
547	 * other time after this.
548	 */
549	dwc2_force_dr_mode(hsotg);
550
551	retval = dwc2_init_params(hsotg);
552	if (retval)
553		goto error;
554
555	if (hsotg->params.activate_stm_id_vb_detection) {
556		u32 ggpio;
557
558		hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d");
559		if (IS_ERR(hsotg->usb33d)) {
560			retval = PTR_ERR(hsotg->usb33d);
561			if (retval != -EPROBE_DEFER)
562				dev_err(hsotg->dev,
563					"failed to request usb33d supply: %d\n",
564					retval);
565			goto error;
566		}
567		retval = regulator_enable(hsotg->usb33d);
568		if (retval) {
569			dev_err(hsotg->dev,
570				"failed to enable usb33d supply: %d\n", retval);
571			goto error;
572		}
573
574		ggpio = dwc2_readl(hsotg, GGPIO);
575		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
576		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
577		dwc2_writel(hsotg, ggpio, GGPIO);
 
 
 
578	}
579
580	retval = dwc2_drd_init(hsotg);
581	if (retval) {
582		if (retval != -EPROBE_DEFER)
583			dev_err(hsotg->dev, "failed to initialize dual-role\n");
584		goto error_init;
585	}
586
587	if (hsotg->dr_mode != USB_DR_MODE_HOST) {
588		retval = dwc2_gadget_init(hsotg);
589		if (retval)
590			goto error_drd;
591		hsotg->gadget_enabled = 1;
592	}
593
594	/*
595	 * If we need PHY for wakeup we must be wakeup capable.
596	 * When we have a device that can wake without the PHY we
597	 * can adjust this condition.
598	 */
599	if (hsotg->need_phy_for_wake)
600		device_set_wakeup_capable(&dev->dev, true);
601
602	hsotg->reset_phy_on_wake =
603		of_property_read_bool(dev->dev.of_node,
604				      "snps,reset-phy-on-wake");
605	if (hsotg->reset_phy_on_wake && !hsotg->phy) {
606		dev_warn(hsotg->dev,
607			 "Quirk reset-phy-on-wake only supports generic PHYs\n");
608		hsotg->reset_phy_on_wake = false;
609	}
610
611	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
612		retval = dwc2_hcd_init(hsotg);
613		if (retval) {
614			if (hsotg->gadget_enabled)
615				dwc2_hsotg_remove(hsotg);
616			goto error_drd;
617		}
618		hsotg->hcd_enabled = 1;
619	}
620
621	platform_set_drvdata(dev, hsotg);
622	hsotg->hibernated = 0;
623
624	dwc2_debugfs_init(hsotg);
625
626	/* Gadget code manages lowlevel hw on its own */
627	if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
628		dwc2_lowlevel_hw_disable(hsotg);
629
630#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
631	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
632	/* Postponed adding a new gadget to the udc class driver list */
633	if (hsotg->gadget_enabled) {
634		retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget);
635		if (retval) {
636			hsotg->gadget.udc = NULL;
637			dwc2_hsotg_remove(hsotg);
638			goto error_debugfs;
639		}
640	}
641#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
642	return 0;
643
644#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
645	IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
646error_debugfs:
647	dwc2_debugfs_exit(hsotg);
648	if (hsotg->hcd_enabled)
649		dwc2_hcd_remove(hsotg);
650#endif
651error_drd:
652	dwc2_drd_exit(hsotg);
653
654error_init:
655	if (hsotg->params.activate_stm_id_vb_detection)
656		regulator_disable(hsotg->usb33d);
657error:
658	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL)
659		dwc2_lowlevel_hw_disable(hsotg);
660	return retval;
661}
662
663static int __maybe_unused dwc2_suspend(struct device *dev)
664{
665	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
666	bool is_device_mode = dwc2_is_device_mode(dwc2);
667	int ret = 0;
668
669	if (is_device_mode)
670		dwc2_hsotg_suspend(dwc2);
671
672	dwc2_drd_suspend(dwc2);
673
674	if (dwc2->params.activate_stm_id_vb_detection) {
675		unsigned long flags;
676		u32 ggpio, gotgctl;
677
678		/*
679		 * Need to force the mode to the current mode to avoid Mode
680		 * Mismatch Interrupt when ID detection will be disabled.
681		 */
682		dwc2_force_mode(dwc2, !is_device_mode);
683
684		spin_lock_irqsave(&dwc2->lock, flags);
685		gotgctl = dwc2_readl(dwc2, GOTGCTL);
686		/* bypass debounce filter, enable overrides */
687		gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
688		gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN;
689		/* Force A / B session if needed */
690		if (gotgctl & GOTGCTL_ASESVLD)
691			gotgctl |= GOTGCTL_AVALOVAL;
692		if (gotgctl & GOTGCTL_BSESVLD)
693			gotgctl |= GOTGCTL_BVALOVAL;
694		dwc2_writel(dwc2, gotgctl, GOTGCTL);
695		spin_unlock_irqrestore(&dwc2->lock, flags);
696
697		ggpio = dwc2_readl(dwc2, GGPIO);
698		ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN;
699		ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN;
700		dwc2_writel(dwc2, ggpio, GGPIO);
701
702		regulator_disable(dwc2->usb33d);
703	}
704
705	if (dwc2->ll_hw_enabled &&
706	    (is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) {
707		ret = __dwc2_lowlevel_hw_disable(dwc2);
708		dwc2->phy_off_for_suspend = true;
709	}
710
711	return ret;
712}
713
714static int __maybe_unused dwc2_resume(struct device *dev)
715{
716	struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
717	int ret = 0;
718
719	if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) {
720		ret = __dwc2_lowlevel_hw_enable(dwc2);
721		if (ret)
722			return ret;
723	}
724	dwc2->phy_off_for_suspend = false;
725
726	if (dwc2->params.activate_stm_id_vb_detection) {
727		unsigned long flags;
728		u32 ggpio, gotgctl;
729
730		ret = regulator_enable(dwc2->usb33d);
731		if (ret)
732			return ret;
733
734		ggpio = dwc2_readl(dwc2, GGPIO);
735		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
736		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
737		dwc2_writel(dwc2, ggpio, GGPIO);
738
739		/* ID/VBUS detection startup time */
740		usleep_range(5000, 7000);
741
742		spin_lock_irqsave(&dwc2->lock, flags);
743		gotgctl = dwc2_readl(dwc2, GOTGCTL);
744		gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS;
745		gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN |
746			     GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL);
747		dwc2_writel(dwc2, gotgctl, GOTGCTL);
748		spin_unlock_irqrestore(&dwc2->lock, flags);
749	}
750
751	/* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
752	dwc2_force_dr_mode(dwc2);
753
754	dwc2_drd_resume(dwc2);
 
 
755
756	if (dwc2_is_device_mode(dwc2))
757		ret = dwc2_hsotg_resume(dwc2);
758
759	return ret;
760}
761
762static const struct dev_pm_ops dwc2_dev_pm_ops = {
763	SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
764};
765
766static struct platform_driver dwc2_platform_driver = {
767	.driver = {
768		.name = dwc2_driver_name,
769		.of_match_table = dwc2_of_match_table,
770		.acpi_match_table = ACPI_PTR(dwc2_acpi_match),
771		.pm = &dwc2_dev_pm_ops,
772	},
773	.probe = dwc2_driver_probe,
774	.remove = dwc2_driver_remove,
775	.shutdown = dwc2_driver_shutdown,
776};
777
778module_platform_driver(dwc2_platform_driver);