1# SPDX-License-Identifier: GPL-2.0-only
  2#
  3# Phy drivers for TI platforms
  4#
  5config PHY_DA8XX_USB
  6	tristate "TI DA8xx USB PHY Driver"
  7	depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
  8	select GENERIC_PHY
  9	select MFD_SYSCON
 10	help
 11	  Enable this to support the USB PHY on DA8xx SoCs.
 12
 13	  This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
 14
 15config PHY_DM816X_USB
 16	tristate "TI dm816x USB PHY driver"
 17	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 18	depends on USB_SUPPORT
 19	select GENERIC_PHY
 20	select USB_PHY
 21	help
 22	  Enable this for dm816x USB to work.
 23
 24config PHY_AM654_SERDES
 25	tristate "TI AM654 SERDES support"
 26	depends on OF && (ARCH_K3 || COMPILE_TEST)
 27	depends on COMMON_CLK
 28	select GENERIC_PHY
 29	select MULTIPLEXER
 30	select REGMAP_MMIO
 31	select MUX_MMIO
 32	help
 33	  This option enables support for TI AM654 SerDes PHY used for
 34	  PCIe.
 35
 36config PHY_J721E_WIZ
 37	tristate "TI J721E WIZ (SERDES Wrapper) support"
 38	depends on OF && (ARCH_K3 || COMPILE_TEST)
 39	depends on HAS_IOMEM && OF_ADDRESS
 40	depends on COMMON_CLK
 41	select GENERIC_PHY
 42	select MULTIPLEXER
 43	select REGMAP_MMIO
 44	select MUX_MMIO
 45	help
 46	  This option enables support for WIZ module present in TI's J721E
 47	  SoC. WIZ is a serdes wrapper used to configure some of the input
 48	  signals to the SERDES (Sierra/Torrent). This driver configures
 49	  three clock selects (pll0, pll1, dig) and resets for each of the
 50	  lanes.
 51
 52config OMAP_CONTROL_PHY
 53	tristate "OMAP CONTROL PHY Driver"
 54	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 55	help
 56	  Enable this to add support for the PHY part present in the control
 57	  module. This driver has API to power on the USB2 PHY and to write to
 58	  the mailbox. The mailbox is present only in omap4 and the register to
 59	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
 60	  additional register to power on USB3 PHY/SATA PHY/PCIE PHY
 61	  (PIPE3 PHY).
 62
 63config OMAP_USB2
 64	tristate "OMAP USB2 PHY Driver"
 65	depends on ARCH_OMAP2PLUS || ARCH_K3
 66	depends on USB_SUPPORT
 67	select GENERIC_PHY
 68	select USB_PHY
 69	select OMAP_CONTROL_PHY if ARCH_OMAP2PLUS || COMPILE_TEST
 70	help
 71	  Enable this to support the transceiver that is part of SOC. This
 72	  driver takes care of all the PHY functionality apart from comparator.
 73	  The USB OTG controller communicates with the comparator using this
 74	  driver.
 75
 76config TI_PIPE3
 77	tristate "TI PIPE3 PHY Driver"
 78	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 79	select GENERIC_PHY
 80	select OMAP_CONTROL_PHY
 81	help
 82	  Enable this to support the PIPE3 PHY that is part of TI SOCs. This
 83	  driver takes care of all the PHY functionality apart from comparator.
 84	  This driver interacts with the "OMAP Control PHY Driver" to power
 85	  on/off the PHY.
 86
 87config PHY_TUSB1210
 88	tristate "TI TUSB1210 ULPI PHY module"
 89	depends on USB_ULPI_BUS
 90	select GENERIC_PHY
 91	help
 92	  Support for TI TUSB1210 USB ULPI PHY.
 93
 94config TWL4030_USB
 95	tristate "TWL4030 USB Transceiver Driver"
 96	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 97	depends on USB_SUPPORT
 98	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
 99	select GENERIC_PHY
100	select USB_PHY
101	help
102	  Enable this to support the USB OTG transceiver on TWL4030
103	  family chips (including the TWL5030 and TPS659x0 devices).
104	  This transceiver supports high and full speed devices plus,
105	  in host mode, low speed.
106
107config PHY_TI_GMII_SEL
108	tristate
109	select GENERIC_PHY
110	select REGMAP
111	help
112	  This driver supports configuring of the TI CPSW Port mode depending on
113	  the Ethernet PHY connected to the CPSW Port.

  1# SPDX-License-Identifier: GPL-2.0-only
  2#
  3# Phy drivers for TI platforms
  4#
  5config PHY_DA8XX_USB
  6	tristate "TI DA8xx USB PHY Driver"
  7	depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
  8	select GENERIC_PHY
  9	select MFD_SYSCON
 10	help
 11	  Enable this to support the USB PHY on DA8xx SoCs.
 12
 13	  This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
 14
 15config PHY_DM816X_USB
 16	tristate "TI dm816x USB PHY driver"
 17	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 18	depends on USB_SUPPORT
 19	select GENERIC_PHY
 20	select USB_PHY
 21	help
 22	  Enable this for dm816x USB to work.
 23
 24config PHY_AM654_SERDES
 25	tristate "TI AM654 SERDES support"
 26	depends on OF && ARCH_K3 || COMPILE_TEST
 27	depends on COMMON_CLK
 28	select GENERIC_PHY
 29	select MULTIPLEXER
 30	select REGMAP_MMIO
 31	select MUX_MMIO
 32	help
 33	  This option enables support for TI AM654 SerDes PHY used for
 34	  PCIe.
 35
 36config PHY_J721E_WIZ
 37	tristate "TI J721E WIZ (SERDES Wrapper) support"
 38	depends on OF && ARCH_K3 || COMPILE_TEST
 39	depends on HAS_IOMEM && OF_ADDRESS
 40	depends on COMMON_CLK
 41	select GENERIC_PHY
 42	select MULTIPLEXER
 43	select REGMAP_MMIO
 44	select MUX_MMIO
 45	help
 46	  This option enables support for WIZ module present in TI's J721E
 47	  SoC. WIZ is a serdes wrapper used to configure some of the input
 48	  signals to the SERDES (Sierra/Torrent). This driver configures
 49	  three clock selects (pll0, pll1, dig) and resets for each of the
 50	  lanes.
 51
 52config OMAP_CONTROL_PHY
 53	tristate "OMAP CONTROL PHY Driver"
 54	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 55	help
 56	  Enable this to add support for the PHY part present in the control
 57	  module. This driver has API to power on the USB2 PHY and to write to
 58	  the mailbox. The mailbox is present only in omap4 and the register to
 59	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
 60	  additional register to power on USB3 PHY/SATA PHY/PCIE PHY
 61	  (PIPE3 PHY).
 62
 63config OMAP_USB2
 64	tristate "OMAP USB2 PHY Driver"
 65	depends on ARCH_OMAP2PLUS || ARCH_K3
 66	depends on USB_SUPPORT
 67	select GENERIC_PHY
 68	select USB_PHY
 69	select OMAP_CONTROL_PHY if ARCH_OMAP2PLUS || COMPILE_TEST
 70	help
 71	  Enable this to support the transceiver that is part of SOC. This
 72	  driver takes care of all the PHY functionality apart from comparator.
 73	  The USB OTG controller communicates with the comparator using this
 74	  driver.
 75
 76config TI_PIPE3
 77	tristate "TI PIPE3 PHY Driver"
 78	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 79	select GENERIC_PHY
 80	select OMAP_CONTROL_PHY
 81	help
 82	  Enable this to support the PIPE3 PHY that is part of TI SOCs. This
 83	  driver takes care of all the PHY functionality apart from comparator.
 84	  This driver interacts with the "OMAP Control PHY Driver" to power
 85	  on/off the PHY.
 86
 87config PHY_TUSB1210
 88	tristate "TI TUSB1210 ULPI PHY module"
 89	depends on USB_ULPI_BUS
 90	select GENERIC_PHY
 91	help
 92	  Support for TI TUSB1210 USB ULPI PHY.
 93
 94config TWL4030_USB
 95	tristate "TWL4030 USB Transceiver Driver"
 96	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 97	depends on USB_SUPPORT
 98	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
 99	select GENERIC_PHY
100	select USB_PHY
101	help
102	  Enable this to support the USB OTG transceiver on TWL4030
103	  family chips (including the TWL5030 and TPS659x0 devices).
104	  This transceiver supports high and full speed devices plus,
105	  in host mode, low speed.
106
107config PHY_TI_GMII_SEL
108	tristate
109	select GENERIC_PHY
110	select REGMAP
111	help
112	  This driver supports configuring of the TI CPSW Port mode depending on
113	  the Ethernet PHY connected to the CPSW Port.