Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*******************************************************************************
3 Copyright (C) 2007-2009 STMicroelectronics Ltd
4
5
6 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
7*******************************************************************************/
8
9#include <linux/io.h>
10#include <linux/iopoll.h>
11#include "common.h"
12#include "dwmac_dma.h"
13#include "stmmac.h"
14
15#define GMAC_HI_REG_AE 0x80000000
16
17int dwmac_dma_reset(void __iomem *ioaddr)
18{
19 u32 value = readl(ioaddr + DMA_BUS_MODE);
20
21 /* DMA SW reset */
22 value |= DMA_BUS_MODE_SFT_RESET;
23 writel(value, ioaddr + DMA_BUS_MODE);
24
25 return readl_poll_timeout(ioaddr + DMA_BUS_MODE, value,
26 !(value & DMA_BUS_MODE_SFT_RESET),
27 10000, 200000);
28}
29
30/* CSR1 enables the transmit DMA to check for new descriptor */
31void dwmac_enable_dma_transmission(void __iomem *ioaddr)
32{
33 writel(1, ioaddr + DMA_XMT_POLL_DEMAND);
34}
35
36void dwmac_enable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr,
37 u32 chan, bool rx, bool tx)
38{
39 u32 value = readl(ioaddr + DMA_INTR_ENA);
40
41 if (rx)
42 value |= DMA_INTR_DEFAULT_RX;
43 if (tx)
44 value |= DMA_INTR_DEFAULT_TX;
45
46 writel(value, ioaddr + DMA_INTR_ENA);
47}
48
49void dwmac_disable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr,
50 u32 chan, bool rx, bool tx)
51{
52 u32 value = readl(ioaddr + DMA_INTR_ENA);
53
54 if (rx)
55 value &= ~DMA_INTR_DEFAULT_RX;
56 if (tx)
57 value &= ~DMA_INTR_DEFAULT_TX;
58
59 writel(value, ioaddr + DMA_INTR_ENA);
60}
61
62void dwmac_dma_start_tx(struct stmmac_priv *priv, void __iomem *ioaddr,
63 u32 chan)
64{
65 u32 value = readl(ioaddr + DMA_CONTROL);
66 value |= DMA_CONTROL_ST;
67 writel(value, ioaddr + DMA_CONTROL);
68}
69
70void dwmac_dma_stop_tx(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan)
71{
72 u32 value = readl(ioaddr + DMA_CONTROL);
73 value &= ~DMA_CONTROL_ST;
74 writel(value, ioaddr + DMA_CONTROL);
75}
76
77void dwmac_dma_start_rx(struct stmmac_priv *priv, void __iomem *ioaddr,
78 u32 chan)
79{
80 u32 value = readl(ioaddr + DMA_CONTROL);
81 value |= DMA_CONTROL_SR;
82 writel(value, ioaddr + DMA_CONTROL);
83}
84
85void dwmac_dma_stop_rx(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan)
86{
87 u32 value = readl(ioaddr + DMA_CONTROL);
88 value &= ~DMA_CONTROL_SR;
89 writel(value, ioaddr + DMA_CONTROL);
90}
91
92#ifdef DWMAC_DMA_DEBUG
93static void show_tx_process_state(unsigned int status)
94{
95 unsigned int state;
96 state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT;
97
98 switch (state) {
99 case 0:
100 pr_debug("- TX (Stopped): Reset or Stop command\n");
101 break;
102 case 1:
103 pr_debug("- TX (Running): Fetching the Tx desc\n");
104 break;
105 case 2:
106 pr_debug("- TX (Running): Waiting for end of tx\n");
107 break;
108 case 3:
109 pr_debug("- TX (Running): Reading the data "
110 "and queuing the data into the Tx buf\n");
111 break;
112 case 6:
113 pr_debug("- TX (Suspended): Tx Buff Underflow "
114 "or an unavailable Transmit descriptor\n");
115 break;
116 case 7:
117 pr_debug("- TX (Running): Closing Tx descriptor\n");
118 break;
119 default:
120 break;
121 }
122}
123
124static void show_rx_process_state(unsigned int status)
125{
126 unsigned int state;
127 state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT;
128
129 switch (state) {
130 case 0:
131 pr_debug("- RX (Stopped): Reset or Stop command\n");
132 break;
133 case 1:
134 pr_debug("- RX (Running): Fetching the Rx desc\n");
135 break;
136 case 2:
137 pr_debug("- RX (Running): Checking for end of pkt\n");
138 break;
139 case 3:
140 pr_debug("- RX (Running): Waiting for Rx pkt\n");
141 break;
142 case 4:
143 pr_debug("- RX (Suspended): Unavailable Rx buf\n");
144 break;
145 case 5:
146 pr_debug("- RX (Running): Closing Rx descriptor\n");
147 break;
148 case 6:
149 pr_debug("- RX(Running): Flushing the current frame"
150 " from the Rx buf\n");
151 break;
152 case 7:
153 pr_debug("- RX (Running): Queuing the Rx frame"
154 " from the Rx buf into memory\n");
155 break;
156 default:
157 break;
158 }
159}
160#endif
161
162int dwmac_dma_interrupt(struct stmmac_priv *priv, void __iomem *ioaddr,
163 struct stmmac_extra_stats *x, u32 chan, u32 dir)
164{
165 struct stmmac_pcpu_stats *stats = this_cpu_ptr(priv->xstats.pcpu_stats);
166 int ret = 0;
167 /* read the status register (CSR5) */
168 u32 intr_status = readl(ioaddr + DMA_STATUS);
169
170#ifdef DWMAC_DMA_DEBUG
171 /* Enable it to monitor DMA rx/tx status in case of critical problems */
172 pr_debug("%s: [CSR5: 0x%08x]\n", __func__, intr_status);
173 show_tx_process_state(intr_status);
174 show_rx_process_state(intr_status);
175#endif
176
177 if (dir == DMA_DIR_RX)
178 intr_status &= DMA_STATUS_MSK_RX;
179 else if (dir == DMA_DIR_TX)
180 intr_status &= DMA_STATUS_MSK_TX;
181
182 /* ABNORMAL interrupts */
183 if (unlikely(intr_status & DMA_STATUS_AIS)) {
184 if (unlikely(intr_status & DMA_STATUS_UNF)) {
185 ret = tx_hard_error_bump_tc;
186 x->tx_undeflow_irq++;
187 }
188 if (unlikely(intr_status & DMA_STATUS_TJT))
189 x->tx_jabber_irq++;
190
191 if (unlikely(intr_status & DMA_STATUS_OVF))
192 x->rx_overflow_irq++;
193
194 if (unlikely(intr_status & DMA_STATUS_RU))
195 x->rx_buf_unav_irq++;
196 if (unlikely(intr_status & DMA_STATUS_RPS))
197 x->rx_process_stopped_irq++;
198 if (unlikely(intr_status & DMA_STATUS_RWT))
199 x->rx_watchdog_irq++;
200 if (unlikely(intr_status & DMA_STATUS_ETI))
201 x->tx_early_irq++;
202 if (unlikely(intr_status & DMA_STATUS_TPS)) {
203 x->tx_process_stopped_irq++;
204 ret = tx_hard_error;
205 }
206 if (unlikely(intr_status & DMA_STATUS_FBI)) {
207 x->fatal_bus_error_irq++;
208 ret = tx_hard_error;
209 }
210 }
211 /* TX/RX NORMAL interrupts */
212 if (likely(intr_status & DMA_STATUS_NIS)) {
213 if (likely(intr_status & DMA_STATUS_RI)) {
214 u32 value = readl(ioaddr + DMA_INTR_ENA);
215 /* to schedule NAPI on real RIE event. */
216 if (likely(value & DMA_INTR_ENA_RIE)) {
217 u64_stats_update_begin(&stats->syncp);
218 u64_stats_inc(&stats->rx_normal_irq_n[chan]);
219 u64_stats_update_end(&stats->syncp);
220 ret |= handle_rx;
221 }
222 }
223 if (likely(intr_status & DMA_STATUS_TI)) {
224 u64_stats_update_begin(&stats->syncp);
225 u64_stats_inc(&stats->tx_normal_irq_n[chan]);
226 u64_stats_update_end(&stats->syncp);
227 ret |= handle_tx;
228 }
229 if (unlikely(intr_status & DMA_STATUS_ERI))
230 x->rx_early_irq++;
231 }
232 /* Optional hardware blocks, interrupts should be disabled */
233 if (unlikely(intr_status &
234 (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
235 pr_warn("%s: unexpected status %08x\n", __func__, intr_status);
236
237 /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
238 writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);
239
240 return ret;
241}
242
243void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr)
244{
245 u32 csr6 = readl(ioaddr + DMA_CONTROL);
246 writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL);
247
248 do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF));
249}
250
251void stmmac_set_mac_addr(void __iomem *ioaddr, const u8 addr[6],
252 unsigned int high, unsigned int low)
253{
254 unsigned long data;
255
256 data = (addr[5] << 8) | addr[4];
257 /* For MAC Addr registers we have to set the Address Enable (AE)
258 * bit that has no effect on the High Reg 0 where the bit 31 (MO)
259 * is RO.
260 */
261 writel(data | GMAC_HI_REG_AE, ioaddr + high);
262 data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
263 writel(data, ioaddr + low);
264}
265EXPORT_SYMBOL_GPL(stmmac_set_mac_addr);
266
267/* Enable disable MAC RX/TX */
268void stmmac_set_mac(void __iomem *ioaddr, bool enable)
269{
270 u32 old_val, value;
271
272 old_val = readl(ioaddr + MAC_CTRL_REG);
273 value = old_val;
274
275 if (enable)
276 value |= MAC_ENABLE_RX | MAC_ENABLE_TX;
277 else
278 value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX);
279
280 if (value != old_val)
281 writel(value, ioaddr + MAC_CTRL_REG);
282}
283
284void stmmac_get_mac_addr(void __iomem *ioaddr, unsigned char *addr,
285 unsigned int high, unsigned int low)
286{
287 unsigned int hi_addr, lo_addr;
288
289 /* Read the MAC address from the hardware */
290 hi_addr = readl(ioaddr + high);
291 lo_addr = readl(ioaddr + low);
292
293 /* Extract the MAC address from the high and low words */
294 addr[0] = lo_addr & 0xff;
295 addr[1] = (lo_addr >> 8) & 0xff;
296 addr[2] = (lo_addr >> 16) & 0xff;
297 addr[3] = (lo_addr >> 24) & 0xff;
298 addr[4] = hi_addr & 0xff;
299 addr[5] = (hi_addr >> 8) & 0xff;
300}
301EXPORT_SYMBOL_GPL(stmmac_get_mac_addr);
1// SPDX-License-Identifier: GPL-2.0-only
2/*******************************************************************************
3 Copyright (C) 2007-2009 STMicroelectronics Ltd
4
5
6 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
7*******************************************************************************/
8
9#include <linux/io.h>
10#include <linux/iopoll.h>
11#include "common.h"
12#include "dwmac_dma.h"
13
14#define GMAC_HI_REG_AE 0x80000000
15
16int dwmac_dma_reset(void __iomem *ioaddr)
17{
18 u32 value = readl(ioaddr + DMA_BUS_MODE);
19
20 /* DMA SW reset */
21 value |= DMA_BUS_MODE_SFT_RESET;
22 writel(value, ioaddr + DMA_BUS_MODE);
23
24 return readl_poll_timeout(ioaddr + DMA_BUS_MODE, value,
25 !(value & DMA_BUS_MODE_SFT_RESET),
26 10000, 200000);
27}
28
29/* CSR1 enables the transmit DMA to check for new descriptor */
30void dwmac_enable_dma_transmission(void __iomem *ioaddr)
31{
32 writel(1, ioaddr + DMA_XMT_POLL_DEMAND);
33}
34
35void dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
36{
37 u32 value = readl(ioaddr + DMA_INTR_ENA);
38
39 if (rx)
40 value |= DMA_INTR_DEFAULT_RX;
41 if (tx)
42 value |= DMA_INTR_DEFAULT_TX;
43
44 writel(value, ioaddr + DMA_INTR_ENA);
45}
46
47void dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
48{
49 u32 value = readl(ioaddr + DMA_INTR_ENA);
50
51 if (rx)
52 value &= ~DMA_INTR_DEFAULT_RX;
53 if (tx)
54 value &= ~DMA_INTR_DEFAULT_TX;
55
56 writel(value, ioaddr + DMA_INTR_ENA);
57}
58
59void dwmac_dma_start_tx(void __iomem *ioaddr, u32 chan)
60{
61 u32 value = readl(ioaddr + DMA_CONTROL);
62 value |= DMA_CONTROL_ST;
63 writel(value, ioaddr + DMA_CONTROL);
64}
65
66void dwmac_dma_stop_tx(void __iomem *ioaddr, u32 chan)
67{
68 u32 value = readl(ioaddr + DMA_CONTROL);
69 value &= ~DMA_CONTROL_ST;
70 writel(value, ioaddr + DMA_CONTROL);
71}
72
73void dwmac_dma_start_rx(void __iomem *ioaddr, u32 chan)
74{
75 u32 value = readl(ioaddr + DMA_CONTROL);
76 value |= DMA_CONTROL_SR;
77 writel(value, ioaddr + DMA_CONTROL);
78}
79
80void dwmac_dma_stop_rx(void __iomem *ioaddr, u32 chan)
81{
82 u32 value = readl(ioaddr + DMA_CONTROL);
83 value &= ~DMA_CONTROL_SR;
84 writel(value, ioaddr + DMA_CONTROL);
85}
86
87#ifdef DWMAC_DMA_DEBUG
88static void show_tx_process_state(unsigned int status)
89{
90 unsigned int state;
91 state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT;
92
93 switch (state) {
94 case 0:
95 pr_debug("- TX (Stopped): Reset or Stop command\n");
96 break;
97 case 1:
98 pr_debug("- TX (Running): Fetching the Tx desc\n");
99 break;
100 case 2:
101 pr_debug("- TX (Running): Waiting for end of tx\n");
102 break;
103 case 3:
104 pr_debug("- TX (Running): Reading the data "
105 "and queuing the data into the Tx buf\n");
106 break;
107 case 6:
108 pr_debug("- TX (Suspended): Tx Buff Underflow "
109 "or an unavailable Transmit descriptor\n");
110 break;
111 case 7:
112 pr_debug("- TX (Running): Closing Tx descriptor\n");
113 break;
114 default:
115 break;
116 }
117}
118
119static void show_rx_process_state(unsigned int status)
120{
121 unsigned int state;
122 state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT;
123
124 switch (state) {
125 case 0:
126 pr_debug("- RX (Stopped): Reset or Stop command\n");
127 break;
128 case 1:
129 pr_debug("- RX (Running): Fetching the Rx desc\n");
130 break;
131 case 2:
132 pr_debug("- RX (Running): Checking for end of pkt\n");
133 break;
134 case 3:
135 pr_debug("- RX (Running): Waiting for Rx pkt\n");
136 break;
137 case 4:
138 pr_debug("- RX (Suspended): Unavailable Rx buf\n");
139 break;
140 case 5:
141 pr_debug("- RX (Running): Closing Rx descriptor\n");
142 break;
143 case 6:
144 pr_debug("- RX(Running): Flushing the current frame"
145 " from the Rx buf\n");
146 break;
147 case 7:
148 pr_debug("- RX (Running): Queuing the Rx frame"
149 " from the Rx buf into memory\n");
150 break;
151 default:
152 break;
153 }
154}
155#endif
156
157int dwmac_dma_interrupt(void __iomem *ioaddr,
158 struct stmmac_extra_stats *x, u32 chan, u32 dir)
159{
160 int ret = 0;
161 /* read the status register (CSR5) */
162 u32 intr_status = readl(ioaddr + DMA_STATUS);
163
164#ifdef DWMAC_DMA_DEBUG
165 /* Enable it to monitor DMA rx/tx status in case of critical problems */
166 pr_debug("%s: [CSR5: 0x%08x]\n", __func__, intr_status);
167 show_tx_process_state(intr_status);
168 show_rx_process_state(intr_status);
169#endif
170
171 if (dir == DMA_DIR_RX)
172 intr_status &= DMA_STATUS_MSK_RX;
173 else if (dir == DMA_DIR_TX)
174 intr_status &= DMA_STATUS_MSK_TX;
175
176 /* ABNORMAL interrupts */
177 if (unlikely(intr_status & DMA_STATUS_AIS)) {
178 if (unlikely(intr_status & DMA_STATUS_UNF)) {
179 ret = tx_hard_error_bump_tc;
180 x->tx_undeflow_irq++;
181 }
182 if (unlikely(intr_status & DMA_STATUS_TJT))
183 x->tx_jabber_irq++;
184
185 if (unlikely(intr_status & DMA_STATUS_OVF))
186 x->rx_overflow_irq++;
187
188 if (unlikely(intr_status & DMA_STATUS_RU))
189 x->rx_buf_unav_irq++;
190 if (unlikely(intr_status & DMA_STATUS_RPS))
191 x->rx_process_stopped_irq++;
192 if (unlikely(intr_status & DMA_STATUS_RWT))
193 x->rx_watchdog_irq++;
194 if (unlikely(intr_status & DMA_STATUS_ETI))
195 x->tx_early_irq++;
196 if (unlikely(intr_status & DMA_STATUS_TPS)) {
197 x->tx_process_stopped_irq++;
198 ret = tx_hard_error;
199 }
200 if (unlikely(intr_status & DMA_STATUS_FBI)) {
201 x->fatal_bus_error_irq++;
202 ret = tx_hard_error;
203 }
204 }
205 /* TX/RX NORMAL interrupts */
206 if (likely(intr_status & DMA_STATUS_NIS)) {
207 x->normal_irq_n++;
208 if (likely(intr_status & DMA_STATUS_RI)) {
209 u32 value = readl(ioaddr + DMA_INTR_ENA);
210 /* to schedule NAPI on real RIE event. */
211 if (likely(value & DMA_INTR_ENA_RIE)) {
212 x->rx_normal_irq_n++;
213 ret |= handle_rx;
214 }
215 }
216 if (likely(intr_status & DMA_STATUS_TI)) {
217 x->tx_normal_irq_n++;
218 ret |= handle_tx;
219 }
220 if (unlikely(intr_status & DMA_STATUS_ERI))
221 x->rx_early_irq++;
222 }
223 /* Optional hardware blocks, interrupts should be disabled */
224 if (unlikely(intr_status &
225 (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
226 pr_warn("%s: unexpected status %08x\n", __func__, intr_status);
227
228 /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
229 writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);
230
231 return ret;
232}
233
234void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr)
235{
236 u32 csr6 = readl(ioaddr + DMA_CONTROL);
237 writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL);
238
239 do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF));
240}
241
242void stmmac_set_mac_addr(void __iomem *ioaddr, u8 addr[6],
243 unsigned int high, unsigned int low)
244{
245 unsigned long data;
246
247 data = (addr[5] << 8) | addr[4];
248 /* For MAC Addr registers we have to set the Address Enable (AE)
249 * bit that has no effect on the High Reg 0 where the bit 31 (MO)
250 * is RO.
251 */
252 writel(data | GMAC_HI_REG_AE, ioaddr + high);
253 data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
254 writel(data, ioaddr + low);
255}
256EXPORT_SYMBOL_GPL(stmmac_set_mac_addr);
257
258/* Enable disable MAC RX/TX */
259void stmmac_set_mac(void __iomem *ioaddr, bool enable)
260{
261 u32 value = readl(ioaddr + MAC_CTRL_REG);
262
263 if (enable)
264 value |= MAC_ENABLE_RX | MAC_ENABLE_TX;
265 else
266 value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX);
267
268 writel(value, ioaddr + MAC_CTRL_REG);
269}
270
271void stmmac_get_mac_addr(void __iomem *ioaddr, unsigned char *addr,
272 unsigned int high, unsigned int low)
273{
274 unsigned int hi_addr, lo_addr;
275
276 /* Read the MAC address from the hardware */
277 hi_addr = readl(ioaddr + high);
278 lo_addr = readl(ioaddr + low);
279
280 /* Extract the MAC address from the high and low words */
281 addr[0] = lo_addr & 0xff;
282 addr[1] = (lo_addr >> 8) & 0xff;
283 addr[2] = (lo_addr >> 16) & 0xff;
284 addr[3] = (lo_addr >> 24) & 0xff;
285 addr[4] = hi_addr & 0xff;
286 addr[5] = (hi_addr >> 8) & 0xff;
287}
288EXPORT_SYMBOL_GPL(stmmac_get_mac_addr);