Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Broadcom device configuration
4#
5
6config NET_VENDOR_BROADCOM
7 bool "Broadcom devices"
8 default y
9 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
10 SIBYTE_SB1xxx_SOC
11 help
12 If you have a network (Ethernet) chipset belonging to this class,
13 say Y.
14
15 Note that the answer to this question does not directly affect
16 the kernel: saying N will just cause the configurator to skip all
17 the questions regarding Broadcom chipsets. If you say Y, you will
18 be asked for your specific chipset/driver in the following questions.
19
20if NET_VENDOR_BROADCOM
21
22config B44
23 tristate "Broadcom 440x/47xx ethernet support"
24 depends on SSB_POSSIBLE && HAS_DMA
25 select SSB
26 select MII
27 select PHYLIB
28 help
29 If you have a network (Ethernet) controller of this type, say Y
30 or M here.
31
32 To compile this driver as a module, choose M here. The module
33 will be called b44.
34
35# Auto-select SSB PCI-HOST support, if possible
36config B44_PCI_AUTOSELECT
37 bool
38 depends on B44 && SSB_PCIHOST_POSSIBLE
39 select SSB_PCIHOST
40 default y
41
42# Auto-select SSB PCICORE driver, if possible
43config B44_PCICORE_AUTOSELECT
44 bool
45 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
46 select SSB_DRIVER_PCICORE
47 default y
48
49config B44_PCI
50 bool
51 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
52 default y
53
54config BCM4908_ENET
55 tristate "Broadcom BCM4908 internal mac support"
56 depends on ARCH_BCMBCA || COMPILE_TEST
57 default y if ARCH_BCMBCA
58 help
59 This driver supports Ethernet controller integrated into Broadcom
60 BCM4908 family SoCs.
61
62config BCM63XX_ENET
63 tristate "Broadcom 63xx internal mac support"
64 depends on BCM63XX
65 select MII
66 select PHYLIB
67 help
68 This driver supports the ethernet MACs in the Broadcom 63xx
69 MIPS chipset family (BCM63XX).
70
71config BCMGENET
72 tristate "Broadcom GENET internal MAC support"
73 depends on HAS_IOMEM
74 depends on PTP_1588_CLOCK_OPTIONAL || !ARCH_BCM2835
75 select MII
76 select PHYLIB
77 select FIXED_PHY
78 select BCM7XXX_PHY
79 select MDIO_BCM_UNIMAC
80 select DIMLIB
81 select BROADCOM_PHY if ARCH_BCM2835
82 help
83 This driver supports the built-in Ethernet MACs found in the
84 Broadcom BCM7xxx Set Top Box family chipset.
85
86config BNX2
87 tristate "QLogic bnx2 support"
88 depends on PCI
89 select CRC32
90 select FW_LOADER
91 help
92 This driver supports QLogic bnx2 gigabit Ethernet cards.
93
94 To compile this driver as a module, choose M here: the module
95 will be called bnx2. This is recommended.
96
97config CNIC
98 tristate "QLogic CNIC support"
99 depends on PCI && (IPV6 || IPV6=n)
100 depends on MMU
101 select BNX2
102 select UIO
103 help
104 This driver supports offload features of QLogic bnx2 gigabit
105 Ethernet cards.
106
107 To compile this driver as a module, choose M here: the module
108 will be called cnic. This is recommended.
109
110config SB1250_MAC
111 tristate "SB1250 Gigabit Ethernet support"
112 depends on SIBYTE_SB1xxx_SOC
113 select PHYLIB
114 help
115 This driver supports Gigabit Ethernet interfaces based on the
116 Broadcom SiByte family of System-On-a-Chip parts. They include
117 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
118 and BCM1480 chips.
119
120 To compile this driver as a module, choose M here: the module
121 will be called sb1250-mac.
122
123config TIGON3
124 tristate "Broadcom Tigon3 support"
125 depends on PCI
126 depends on PTP_1588_CLOCK_OPTIONAL
127 select PHYLIB
128 help
129 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
130
131 To compile this driver as a module, choose M here: the module
132 will be called tg3. This is recommended.
133
134config TIGON3_HWMON
135 bool "Broadcom Tigon3 HWMON support"
136 default y
137 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
138 help
139 Say Y if you want to expose the thermal sensor on Tigon3 devices.
140
141config BNX2X
142 tristate "Broadcom NetXtremeII 10Gb support"
143 depends on PCI
144 depends on PTP_1588_CLOCK_OPTIONAL
145 select FW_LOADER
146 select ZLIB_INFLATE
147 select LIBCRC32C
148 select MDIO
149 help
150 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
151 To compile this driver as a module, choose M here: the module
152 will be called bnx2x. This is recommended.
153
154config BNX2X_SRIOV
155 bool "Broadcom 578xx and 57712 SR-IOV support"
156 depends on BNX2X && PCI_IOV
157 default y
158 help
159 This configuration parameter enables Single Root Input Output
160 Virtualization support in the 578xx and 57712 products. This
161 allows for virtual function acceleration in virtual environments.
162
163config BGMAC
164 tristate
165 help
166 This enables the integrated ethernet controller support for many
167 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
168 needs to be enabled to select this.
169
170config BGMAC_BCMA
171 tristate "Broadcom iProc GBit BCMA support"
172 depends on BCMA && BCMA_HOST_SOC
173 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
174 select BGMAC
175 select PHYLIB
176 select FIXED_PHY
177 help
178 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
179 They can be found on BCM47xx SoCs and provide gigabit ethernet.
180 In case of using this driver on BCM4706 it's also requires to enable
181 BCMA_DRIVER_GMAC_CMN to make it work.
182
183config BGMAC_PLATFORM
184 tristate "Broadcom iProc GBit platform support"
185 depends on ARCH_BCM_IPROC || COMPILE_TEST
186 select BGMAC
187 select PHYLIB
188 select FIXED_PHY
189 default ARCH_BCM_IPROC
190 help
191 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
192 controller through the generic platform interface
193
194config SYSTEMPORT
195 tristate "Broadcom SYSTEMPORT internal MAC support"
196 depends on HAS_IOMEM
197 depends on NET_DSA || !NET_DSA
198 select MII
199 select PHYLIB
200 select FIXED_PHY
201 select DIMLIB
202 help
203 This driver supports the built-in Ethernet MACs found in the
204 Broadcom BCM7xxx Set Top Box family chipset using an internal
205 Ethernet switch.
206
207config BNXT
208 tristate "Broadcom NetXtreme-C/E support"
209 depends on PCI
210 depends on PTP_1588_CLOCK_OPTIONAL
211 select FW_LOADER
212 select LIBCRC32C
213 select NET_DEVLINK
214 select PAGE_POOL
215 select DIMLIB
216 select AUXILIARY_BUS
217 help
218 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
219 Ethernet cards. To compile this driver as a module, choose M here:
220 the module will be called bnxt_en. This is recommended.
221
222config BNXT_SRIOV
223 bool "Broadcom NetXtreme-C/E SR-IOV support"
224 depends on BNXT && PCI_IOV
225 default y
226 help
227 This configuration parameter enables Single Root Input Output
228 Virtualization support in the NetXtreme-C/E products. This
229 allows for virtual function acceleration in virtual environments.
230
231config BNXT_FLOWER_OFFLOAD
232 bool "TC Flower offload support for NetXtreme-C/E"
233 depends on BNXT
234 default y
235 help
236 This configuration parameter enables TC Flower packet classifier
237 offload for eswitch. This option enables SR-IOV switchdev eswitch
238 offload.
239
240config BNXT_DCB
241 bool "Data Center Bridging (DCB) Support"
242 default n
243 depends on BNXT && DCB
244 help
245 Say Y here if you want to use Data Center Bridging (DCB) in the
246 driver.
247
248 If unsure, say N.
249
250config BNXT_HWMON
251 bool "Broadcom NetXtreme-C/E HWMON support"
252 default y
253 depends on BNXT && HWMON && !(BNXT=y && HWMON=m)
254 help
255 Say Y if you want to expose the thermal sensor data on NetXtreme-C/E
256 devices, via the hwmon sysfs interface.
257
258config BCMASP
259 tristate "Broadcom ASP 2.0 Ethernet support"
260 depends on ARCH_BRCMSTB || COMPILE_TEST
261 default ARCH_BRCMSTB
262 depends on OF
263 select MII
264 select PHYLIB
265 select MDIO_BCM_UNIMAC
266 help
267 This configuration enables the Broadcom ASP 2.0 Ethernet controller
268 driver which is present in Broadcom STB SoCs such as 72165.
269
270endif # NET_VENDOR_BROADCOM
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Broadcom device configuration
4#
5
6config NET_VENDOR_BROADCOM
7 bool "Broadcom devices"
8 default y
9 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
10 SIBYTE_SB1xxx_SOC
11 help
12 If you have a network (Ethernet) chipset belonging to this class,
13 say Y.
14
15 Note that the answer to this question does not directly affect
16 the kernel: saying N will just cause the configurator to skip all
17 the questions regarding Broadcom chipsets. If you say Y, you will
18 be asked for your specific chipset/driver in the following questions.
19
20if NET_VENDOR_BROADCOM
21
22config B44
23 tristate "Broadcom 440x/47xx ethernet support"
24 depends on SSB_POSSIBLE && HAS_DMA
25 select SSB
26 select MII
27 select PHYLIB
28 help
29 If you have a network (Ethernet) controller of this type, say Y
30 or M here.
31
32 To compile this driver as a module, choose M here. The module
33 will be called b44.
34
35# Auto-select SSB PCI-HOST support, if possible
36config B44_PCI_AUTOSELECT
37 bool
38 depends on B44 && SSB_PCIHOST_POSSIBLE
39 select SSB_PCIHOST
40 default y
41
42# Auto-select SSB PCICORE driver, if possible
43config B44_PCICORE_AUTOSELECT
44 bool
45 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
46 select SSB_DRIVER_PCICORE
47 default y
48
49config B44_PCI
50 bool
51 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
52 default y
53
54config BCM4908_ENET
55 tristate "Broadcom BCM4908 internal mac support"
56 depends on ARCH_BCM4908 || COMPILE_TEST
57 default y if ARCH_BCM4908
58 help
59 This driver supports Ethernet controller integrated into Broadcom
60 BCM4908 family SoCs.
61
62config BCM63XX_ENET
63 tristate "Broadcom 63xx internal mac support"
64 depends on BCM63XX
65 select MII
66 select PHYLIB
67 help
68 This driver supports the ethernet MACs in the Broadcom 63xx
69 MIPS chipset family (BCM63XX).
70
71config BCMGENET
72 tristate "Broadcom GENET internal MAC support"
73 depends on HAS_IOMEM
74 select MII
75 select PHYLIB
76 select FIXED_PHY
77 select BCM7XXX_PHY
78 select MDIO_BCM_UNIMAC
79 select DIMLIB
80 select BROADCOM_PHY if ARCH_BCM2835
81 help
82 This driver supports the built-in Ethernet MACs found in the
83 Broadcom BCM7xxx Set Top Box family chipset.
84
85config BNX2
86 tristate "QLogic bnx2 support"
87 depends on PCI
88 select CRC32
89 select FW_LOADER
90 help
91 This driver supports QLogic bnx2 gigabit Ethernet cards.
92
93 To compile this driver as a module, choose M here: the module
94 will be called bnx2. This is recommended.
95
96config CNIC
97 tristate "QLogic CNIC support"
98 depends on PCI && (IPV6 || IPV6=n)
99 depends on MMU
100 select BNX2
101 select UIO
102 help
103 This driver supports offload features of QLogic bnx2 gigabit
104 Ethernet cards.
105
106 To compile this driver as a module, choose M here: the module
107 will be called cnic. This is recommended.
108
109config SB1250_MAC
110 tristate "SB1250 Gigabit Ethernet support"
111 depends on SIBYTE_SB1xxx_SOC
112 select PHYLIB
113 help
114 This driver supports Gigabit Ethernet interfaces based on the
115 Broadcom SiByte family of System-On-a-Chip parts. They include
116 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
117 and BCM1480 chips.
118
119 To compile this driver as a module, choose M here: the module
120 will be called sb1250-mac.
121
122config TIGON3
123 tristate "Broadcom Tigon3 support"
124 depends on PCI
125 select PHYLIB
126 imply PTP_1588_CLOCK
127 help
128 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
129
130 To compile this driver as a module, choose M here: the module
131 will be called tg3. This is recommended.
132
133config TIGON3_HWMON
134 bool "Broadcom Tigon3 HWMON support"
135 default y
136 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
137 help
138 Say Y if you want to expose the thermal sensor on Tigon3 devices.
139
140config BNX2X
141 tristate "Broadcom NetXtremeII 10Gb support"
142 depends on PCI
143 imply PTP_1588_CLOCK
144 select FW_LOADER
145 select ZLIB_INFLATE
146 select LIBCRC32C
147 select MDIO
148 help
149 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
150 To compile this driver as a module, choose M here: the module
151 will be called bnx2x. This is recommended.
152
153config BNX2X_SRIOV
154 bool "Broadcom 578xx and 57712 SR-IOV support"
155 depends on BNX2X && PCI_IOV
156 default y
157 help
158 This configuration parameter enables Single Root Input Output
159 Virtualization support in the 578xx and 57712 products. This
160 allows for virtual function acceleration in virtual environments.
161
162config BGMAC
163 tristate
164 help
165 This enables the integrated ethernet controller support for many
166 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
167 needs to be enabled to select this.
168
169config BGMAC_BCMA
170 tristate "Broadcom iProc GBit BCMA support"
171 depends on BCMA && BCMA_HOST_SOC
172 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
173 select BGMAC
174 select PHYLIB
175 select FIXED_PHY
176 help
177 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
178 They can be found on BCM47xx SoCs and provide gigabit ethernet.
179 In case of using this driver on BCM4706 it's also requires to enable
180 BCMA_DRIVER_GMAC_CMN to make it work.
181
182config BGMAC_PLATFORM
183 tristate "Broadcom iProc GBit platform support"
184 depends on ARCH_BCM_IPROC || COMPILE_TEST
185 select BGMAC
186 select PHYLIB
187 select FIXED_PHY
188 default ARCH_BCM_IPROC
189 help
190 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
191 controller through the generic platform interface
192
193config SYSTEMPORT
194 tristate "Broadcom SYSTEMPORT internal MAC support"
195 depends on HAS_IOMEM
196 depends on NET_DSA || !NET_DSA
197 select MII
198 select PHYLIB
199 select FIXED_PHY
200 select DIMLIB
201 help
202 This driver supports the built-in Ethernet MACs found in the
203 Broadcom BCM7xxx Set Top Box family chipset using an internal
204 Ethernet switch.
205
206config BNXT
207 tristate "Broadcom NetXtreme-C/E support"
208 depends on PCI
209 imply PTP_1588_CLOCK
210 select FW_LOADER
211 select LIBCRC32C
212 select NET_DEVLINK
213 select PAGE_POOL
214 select DIMLIB
215 help
216 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
217 Ethernet cards. To compile this driver as a module, choose M here:
218 the module will be called bnxt_en. This is recommended.
219
220config BNXT_SRIOV
221 bool "Broadcom NetXtreme-C/E SR-IOV support"
222 depends on BNXT && PCI_IOV
223 default y
224 help
225 This configuration parameter enables Single Root Input Output
226 Virtualization support in the NetXtreme-C/E products. This
227 allows for virtual function acceleration in virtual environments.
228
229config BNXT_FLOWER_OFFLOAD
230 bool "TC Flower offload support for NetXtreme-C/E"
231 depends on BNXT
232 default y
233 help
234 This configuration parameter enables TC Flower packet classifier
235 offload for eswitch. This option enables SR-IOV switchdev eswitch
236 offload.
237
238config BNXT_DCB
239 bool "Data Center Bridging (DCB) Support"
240 default n
241 depends on BNXT && DCB
242 help
243 Say Y here if you want to use Data Center Bridging (DCB) in the
244 driver.
245
246 If unsure, say N.
247
248config BNXT_HWMON
249 bool "Broadcom NetXtreme-C/E HWMON support"
250 default y
251 depends on BNXT && HWMON && !(BNXT=y && HWMON=m)
252 help
253 Say Y if you want to expose the thermal sensor data on NetXtreme-C/E
254 devices, via the hwmon sysfs interface.
255
256endif # NET_VENDOR_BROADCOM