Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Linux I2C core
4 *
5 * Copyright (C) 1995-99 Simon G. Vogl
6 * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>
7 * Mux support by Rodolfo Giometti <giometti@enneenne.com> and
8 * Michael Lawnick <michael.lawnick.ext@nsn.com>
9 *
10 * Copyright (C) 2013-2017 Wolfram Sang <wsa@kernel.org>
11 */
12
13#define pr_fmt(fmt) "i2c-core: " fmt
14
15#include <dt-bindings/i2c/i2c.h>
16#include <linux/acpi.h>
17#include <linux/clk/clk-conf.h>
18#include <linux/completion.h>
19#include <linux/debugfs.h>
20#include <linux/delay.h>
21#include <linux/err.h>
22#include <linux/errno.h>
23#include <linux/gpio/consumer.h>
24#include <linux/i2c.h>
25#include <linux/i2c-smbus.h>
26#include <linux/idr.h>
27#include <linux/init.h>
28#include <linux/interrupt.h>
29#include <linux/irqflags.h>
30#include <linux/jump_label.h>
31#include <linux/kernel.h>
32#include <linux/module.h>
33#include <linux/mutex.h>
34#include <linux/of_device.h>
35#include <linux/of.h>
36#include <linux/of_irq.h>
37#include <linux/pinctrl/consumer.h>
38#include <linux/pinctrl/devinfo.h>
39#include <linux/pm_domain.h>
40#include <linux/pm_runtime.h>
41#include <linux/pm_wakeirq.h>
42#include <linux/property.h>
43#include <linux/rwsem.h>
44#include <linux/slab.h>
45
46#include "i2c-core.h"
47
48#define CREATE_TRACE_POINTS
49#include <trace/events/i2c.h>
50
51#define I2C_ADDR_OFFSET_TEN_BIT 0xa000
52#define I2C_ADDR_OFFSET_SLAVE 0x1000
53
54#define I2C_ADDR_7BITS_MAX 0x77
55#define I2C_ADDR_7BITS_COUNT (I2C_ADDR_7BITS_MAX + 1)
56
57#define I2C_ADDR_DEVICE_ID 0x7c
58
59/*
60 * core_lock protects i2c_adapter_idr, and guarantees that device detection,
61 * deletion of detected devices are serialized
62 */
63static DEFINE_MUTEX(core_lock);
64static DEFINE_IDR(i2c_adapter_idr);
65
66static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
67
68static DEFINE_STATIC_KEY_FALSE(i2c_trace_msg_key);
69static bool is_registered;
70
71static struct dentry *i2c_debugfs_root;
72
73int i2c_transfer_trace_reg(void)
74{
75 static_branch_inc(&i2c_trace_msg_key);
76 return 0;
77}
78
79void i2c_transfer_trace_unreg(void)
80{
81 static_branch_dec(&i2c_trace_msg_key);
82}
83
84const char *i2c_freq_mode_string(u32 bus_freq_hz)
85{
86 switch (bus_freq_hz) {
87 case I2C_MAX_STANDARD_MODE_FREQ:
88 return "Standard Mode (100 kHz)";
89 case I2C_MAX_FAST_MODE_FREQ:
90 return "Fast Mode (400 kHz)";
91 case I2C_MAX_FAST_MODE_PLUS_FREQ:
92 return "Fast Mode Plus (1.0 MHz)";
93 case I2C_MAX_TURBO_MODE_FREQ:
94 return "Turbo Mode (1.4 MHz)";
95 case I2C_MAX_HIGH_SPEED_MODE_FREQ:
96 return "High Speed Mode (3.4 MHz)";
97 case I2C_MAX_ULTRA_FAST_MODE_FREQ:
98 return "Ultra Fast Mode (5.0 MHz)";
99 default:
100 return "Unknown Mode";
101 }
102}
103EXPORT_SYMBOL_GPL(i2c_freq_mode_string);
104
105const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
106 const struct i2c_client *client)
107{
108 if (!(id && client))
109 return NULL;
110
111 while (id->name[0]) {
112 if (strcmp(client->name, id->name) == 0)
113 return id;
114 id++;
115 }
116 return NULL;
117}
118EXPORT_SYMBOL_GPL(i2c_match_id);
119
120const void *i2c_get_match_data(const struct i2c_client *client)
121{
122 struct i2c_driver *driver = to_i2c_driver(client->dev.driver);
123 const struct i2c_device_id *match;
124 const void *data;
125
126 data = device_get_match_data(&client->dev);
127 if (!data) {
128 match = i2c_match_id(driver->id_table, client);
129 if (!match)
130 return NULL;
131
132 data = (const void *)match->driver_data;
133 }
134
135 return data;
136}
137EXPORT_SYMBOL(i2c_get_match_data);
138
139static int i2c_device_match(struct device *dev, struct device_driver *drv)
140{
141 struct i2c_client *client = i2c_verify_client(dev);
142 struct i2c_driver *driver;
143
144
145 /* Attempt an OF style match */
146 if (i2c_of_match_device(drv->of_match_table, client))
147 return 1;
148
149 /* Then ACPI style match */
150 if (acpi_driver_match_device(dev, drv))
151 return 1;
152
153 driver = to_i2c_driver(drv);
154
155 /* Finally an I2C match */
156 if (i2c_match_id(driver->id_table, client))
157 return 1;
158
159 return 0;
160}
161
162static int i2c_device_uevent(const struct device *dev, struct kobj_uevent_env *env)
163{
164 const struct i2c_client *client = to_i2c_client(dev);
165 int rc;
166
167 rc = of_device_uevent_modalias(dev, env);
168 if (rc != -ENODEV)
169 return rc;
170
171 rc = acpi_device_uevent_modalias(dev, env);
172 if (rc != -ENODEV)
173 return rc;
174
175 return add_uevent_var(env, "MODALIAS=%s%s", I2C_MODULE_PREFIX, client->name);
176}
177
178/* i2c bus recovery routines */
179static int get_scl_gpio_value(struct i2c_adapter *adap)
180{
181 return gpiod_get_value_cansleep(adap->bus_recovery_info->scl_gpiod);
182}
183
184static void set_scl_gpio_value(struct i2c_adapter *adap, int val)
185{
186 gpiod_set_value_cansleep(adap->bus_recovery_info->scl_gpiod, val);
187}
188
189static int get_sda_gpio_value(struct i2c_adapter *adap)
190{
191 return gpiod_get_value_cansleep(adap->bus_recovery_info->sda_gpiod);
192}
193
194static void set_sda_gpio_value(struct i2c_adapter *adap, int val)
195{
196 gpiod_set_value_cansleep(adap->bus_recovery_info->sda_gpiod, val);
197}
198
199static int i2c_generic_bus_free(struct i2c_adapter *adap)
200{
201 struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
202 int ret = -EOPNOTSUPP;
203
204 if (bri->get_bus_free)
205 ret = bri->get_bus_free(adap);
206 else if (bri->get_sda)
207 ret = bri->get_sda(adap);
208
209 if (ret < 0)
210 return ret;
211
212 return ret ? 0 : -EBUSY;
213}
214
215/*
216 * We are generating clock pulses. ndelay() determines durating of clk pulses.
217 * We will generate clock with rate 100 KHz and so duration of both clock levels
218 * is: delay in ns = (10^6 / 100) / 2
219 */
220#define RECOVERY_NDELAY 5000
221#define RECOVERY_CLK_CNT 9
222
223int i2c_generic_scl_recovery(struct i2c_adapter *adap)
224{
225 struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
226 int i = 0, scl = 1, ret = 0;
227
228 if (bri->prepare_recovery)
229 bri->prepare_recovery(adap);
230 if (bri->pinctrl)
231 pinctrl_select_state(bri->pinctrl, bri->pins_gpio);
232
233 /*
234 * If we can set SDA, we will always create a STOP to ensure additional
235 * pulses will do no harm. This is achieved by letting SDA follow SCL
236 * half a cycle later. Check the 'incomplete_write_byte' fault injector
237 * for details. Note that we must honour tsu:sto, 4us, but lets use 5us
238 * here for simplicity.
239 */
240 bri->set_scl(adap, scl);
241 ndelay(RECOVERY_NDELAY);
242 if (bri->set_sda)
243 bri->set_sda(adap, scl);
244 ndelay(RECOVERY_NDELAY / 2);
245
246 /*
247 * By this time SCL is high, as we need to give 9 falling-rising edges
248 */
249 while (i++ < RECOVERY_CLK_CNT * 2) {
250 if (scl) {
251 /* SCL shouldn't be low here */
252 if (!bri->get_scl(adap)) {
253 dev_err(&adap->dev,
254 "SCL is stuck low, exit recovery\n");
255 ret = -EBUSY;
256 break;
257 }
258 }
259
260 scl = !scl;
261 bri->set_scl(adap, scl);
262 /* Creating STOP again, see above */
263 if (scl) {
264 /* Honour minimum tsu:sto */
265 ndelay(RECOVERY_NDELAY);
266 } else {
267 /* Honour minimum tf and thd:dat */
268 ndelay(RECOVERY_NDELAY / 2);
269 }
270 if (bri->set_sda)
271 bri->set_sda(adap, scl);
272 ndelay(RECOVERY_NDELAY / 2);
273
274 if (scl) {
275 ret = i2c_generic_bus_free(adap);
276 if (ret == 0)
277 break;
278 }
279 }
280
281 /* If we can't check bus status, assume recovery worked */
282 if (ret == -EOPNOTSUPP)
283 ret = 0;
284
285 if (bri->unprepare_recovery)
286 bri->unprepare_recovery(adap);
287 if (bri->pinctrl)
288 pinctrl_select_state(bri->pinctrl, bri->pins_default);
289
290 return ret;
291}
292EXPORT_SYMBOL_GPL(i2c_generic_scl_recovery);
293
294int i2c_recover_bus(struct i2c_adapter *adap)
295{
296 if (!adap->bus_recovery_info)
297 return -EBUSY;
298
299 dev_dbg(&adap->dev, "Trying i2c bus recovery\n");
300 return adap->bus_recovery_info->recover_bus(adap);
301}
302EXPORT_SYMBOL_GPL(i2c_recover_bus);
303
304static void i2c_gpio_init_pinctrl_recovery(struct i2c_adapter *adap)
305{
306 struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
307 struct device *dev = &adap->dev;
308 struct pinctrl *p = bri->pinctrl ?: dev_pinctrl(dev->parent);
309
310 bri->pinctrl = p;
311
312 /*
313 * we can't change states without pinctrl, so remove the states if
314 * populated
315 */
316 if (!p) {
317 bri->pins_default = NULL;
318 bri->pins_gpio = NULL;
319 return;
320 }
321
322 if (!bri->pins_default) {
323 bri->pins_default = pinctrl_lookup_state(p,
324 PINCTRL_STATE_DEFAULT);
325 if (IS_ERR(bri->pins_default)) {
326 dev_dbg(dev, PINCTRL_STATE_DEFAULT " state not found for GPIO recovery\n");
327 bri->pins_default = NULL;
328 }
329 }
330 if (!bri->pins_gpio) {
331 bri->pins_gpio = pinctrl_lookup_state(p, "gpio");
332 if (IS_ERR(bri->pins_gpio))
333 bri->pins_gpio = pinctrl_lookup_state(p, "recovery");
334
335 if (IS_ERR(bri->pins_gpio)) {
336 dev_dbg(dev, "no gpio or recovery state found for GPIO recovery\n");
337 bri->pins_gpio = NULL;
338 }
339 }
340
341 /* for pinctrl state changes, we need all the information */
342 if (bri->pins_default && bri->pins_gpio) {
343 dev_info(dev, "using pinctrl states for GPIO recovery");
344 } else {
345 bri->pinctrl = NULL;
346 bri->pins_default = NULL;
347 bri->pins_gpio = NULL;
348 }
349}
350
351static int i2c_gpio_init_generic_recovery(struct i2c_adapter *adap)
352{
353 struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
354 struct device *dev = &adap->dev;
355 struct gpio_desc *gpiod;
356 int ret = 0;
357
358 /*
359 * don't touch the recovery information if the driver is not using
360 * generic SCL recovery
361 */
362 if (bri->recover_bus && bri->recover_bus != i2c_generic_scl_recovery)
363 return 0;
364
365 /*
366 * pins might be taken as GPIO, so we should inform pinctrl about
367 * this and move the state to GPIO
368 */
369 if (bri->pinctrl)
370 pinctrl_select_state(bri->pinctrl, bri->pins_gpio);
371
372 /*
373 * if there is incomplete or no recovery information, see if generic
374 * GPIO recovery is available
375 */
376 if (!bri->scl_gpiod) {
377 gpiod = devm_gpiod_get(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
378 if (PTR_ERR(gpiod) == -EPROBE_DEFER) {
379 ret = -EPROBE_DEFER;
380 goto cleanup_pinctrl_state;
381 }
382 if (!IS_ERR(gpiod)) {
383 bri->scl_gpiod = gpiod;
384 bri->recover_bus = i2c_generic_scl_recovery;
385 dev_info(dev, "using generic GPIOs for recovery\n");
386 }
387 }
388
389 /* SDA GPIOD line is optional, so we care about DEFER only */
390 if (!bri->sda_gpiod) {
391 /*
392 * We have SCL. Pull SCL low and wait a bit so that SDA glitches
393 * have no effect.
394 */
395 gpiod_direction_output(bri->scl_gpiod, 0);
396 udelay(10);
397 gpiod = devm_gpiod_get(dev, "sda", GPIOD_IN);
398
399 /* Wait a bit in case of a SDA glitch, and then release SCL. */
400 udelay(10);
401 gpiod_direction_output(bri->scl_gpiod, 1);
402
403 if (PTR_ERR(gpiod) == -EPROBE_DEFER) {
404 ret = -EPROBE_DEFER;
405 goto cleanup_pinctrl_state;
406 }
407 if (!IS_ERR(gpiod))
408 bri->sda_gpiod = gpiod;
409 }
410
411cleanup_pinctrl_state:
412 /* change the state of the pins back to their default state */
413 if (bri->pinctrl)
414 pinctrl_select_state(bri->pinctrl, bri->pins_default);
415
416 return ret;
417}
418
419static int i2c_gpio_init_recovery(struct i2c_adapter *adap)
420{
421 i2c_gpio_init_pinctrl_recovery(adap);
422 return i2c_gpio_init_generic_recovery(adap);
423}
424
425static int i2c_init_recovery(struct i2c_adapter *adap)
426{
427 struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
428 bool is_error_level = true;
429 char *err_str;
430
431 if (!bri)
432 return 0;
433
434 if (i2c_gpio_init_recovery(adap) == -EPROBE_DEFER)
435 return -EPROBE_DEFER;
436
437 if (!bri->recover_bus) {
438 err_str = "no suitable method provided";
439 is_error_level = false;
440 goto err;
441 }
442
443 if (bri->scl_gpiod && bri->recover_bus == i2c_generic_scl_recovery) {
444 bri->get_scl = get_scl_gpio_value;
445 bri->set_scl = set_scl_gpio_value;
446 if (bri->sda_gpiod) {
447 bri->get_sda = get_sda_gpio_value;
448 /* FIXME: add proper flag instead of '0' once available */
449 if (gpiod_get_direction(bri->sda_gpiod) == 0)
450 bri->set_sda = set_sda_gpio_value;
451 }
452 } else if (bri->recover_bus == i2c_generic_scl_recovery) {
453 /* Generic SCL recovery */
454 if (!bri->set_scl || !bri->get_scl) {
455 err_str = "no {get|set}_scl() found";
456 goto err;
457 }
458 if (!bri->set_sda && !bri->get_sda) {
459 err_str = "either get_sda() or set_sda() needed";
460 goto err;
461 }
462 }
463
464 return 0;
465 err:
466 if (is_error_level)
467 dev_err(&adap->dev, "Not using recovery: %s\n", err_str);
468 else
469 dev_dbg(&adap->dev, "Not using recovery: %s\n", err_str);
470 adap->bus_recovery_info = NULL;
471
472 return -EINVAL;
473}
474
475static int i2c_smbus_host_notify_to_irq(const struct i2c_client *client)
476{
477 struct i2c_adapter *adap = client->adapter;
478 unsigned int irq;
479
480 if (!adap->host_notify_domain)
481 return -ENXIO;
482
483 if (client->flags & I2C_CLIENT_TEN)
484 return -EINVAL;
485
486 irq = irq_create_mapping(adap->host_notify_domain, client->addr);
487
488 return irq > 0 ? irq : -ENXIO;
489}
490
491static int i2c_device_probe(struct device *dev)
492{
493 struct i2c_client *client = i2c_verify_client(dev);
494 struct i2c_driver *driver;
495 bool do_power_on;
496 int status;
497
498 if (!client)
499 return 0;
500
501 client->irq = client->init_irq;
502
503 if (!client->irq) {
504 int irq = -ENOENT;
505
506 if (client->flags & I2C_CLIENT_HOST_NOTIFY) {
507 dev_dbg(dev, "Using Host Notify IRQ\n");
508 /* Keep adapter active when Host Notify is required */
509 pm_runtime_get_sync(&client->adapter->dev);
510 irq = i2c_smbus_host_notify_to_irq(client);
511 } else if (dev->of_node) {
512 irq = of_irq_get_byname(dev->of_node, "irq");
513 if (irq == -EINVAL || irq == -ENODATA)
514 irq = of_irq_get(dev->of_node, 0);
515 } else if (ACPI_COMPANION(dev)) {
516 bool wake_capable;
517
518 irq = i2c_acpi_get_irq(client, &wake_capable);
519 if (irq > 0 && wake_capable)
520 client->flags |= I2C_CLIENT_WAKE;
521 }
522 if (irq == -EPROBE_DEFER) {
523 status = irq;
524 goto put_sync_adapter;
525 }
526
527 if (irq < 0)
528 irq = 0;
529
530 client->irq = irq;
531 }
532
533 driver = to_i2c_driver(dev->driver);
534
535 /*
536 * An I2C ID table is not mandatory, if and only if, a suitable OF
537 * or ACPI ID table is supplied for the probing device.
538 */
539 if (!driver->id_table &&
540 !acpi_driver_match_device(dev, dev->driver) &&
541 !i2c_of_match_device(dev->driver->of_match_table, client)) {
542 status = -ENODEV;
543 goto put_sync_adapter;
544 }
545
546 if (client->flags & I2C_CLIENT_WAKE) {
547 int wakeirq;
548
549 wakeirq = of_irq_get_byname(dev->of_node, "wakeup");
550 if (wakeirq == -EPROBE_DEFER) {
551 status = wakeirq;
552 goto put_sync_adapter;
553 }
554
555 device_init_wakeup(&client->dev, true);
556
557 if (wakeirq > 0 && wakeirq != client->irq)
558 status = dev_pm_set_dedicated_wake_irq(dev, wakeirq);
559 else if (client->irq > 0)
560 status = dev_pm_set_wake_irq(dev, client->irq);
561 else
562 status = 0;
563
564 if (status)
565 dev_warn(&client->dev, "failed to set up wakeup irq\n");
566 }
567
568 dev_dbg(dev, "probe\n");
569
570 status = of_clk_set_defaults(dev->of_node, false);
571 if (status < 0)
572 goto err_clear_wakeup_irq;
573
574 do_power_on = !i2c_acpi_waive_d0_probe(dev);
575 status = dev_pm_domain_attach(&client->dev, do_power_on);
576 if (status)
577 goto err_clear_wakeup_irq;
578
579 client->devres_group_id = devres_open_group(&client->dev, NULL,
580 GFP_KERNEL);
581 if (!client->devres_group_id) {
582 status = -ENOMEM;
583 goto err_detach_pm_domain;
584 }
585
586 if (driver->probe)
587 status = driver->probe(client);
588 else
589 status = -EINVAL;
590
591 /*
592 * Note that we are not closing the devres group opened above so
593 * even resources that were attached to the device after probe is
594 * run are released when i2c_device_remove() is executed. This is
595 * needed as some drivers would allocate additional resources,
596 * for example when updating firmware.
597 */
598
599 if (status)
600 goto err_release_driver_resources;
601
602 return 0;
603
604err_release_driver_resources:
605 devres_release_group(&client->dev, client->devres_group_id);
606err_detach_pm_domain:
607 dev_pm_domain_detach(&client->dev, do_power_on);
608err_clear_wakeup_irq:
609 dev_pm_clear_wake_irq(&client->dev);
610 device_init_wakeup(&client->dev, false);
611put_sync_adapter:
612 if (client->flags & I2C_CLIENT_HOST_NOTIFY)
613 pm_runtime_put_sync(&client->adapter->dev);
614
615 return status;
616}
617
618static void i2c_device_remove(struct device *dev)
619{
620 struct i2c_client *client = to_i2c_client(dev);
621 struct i2c_driver *driver;
622
623 driver = to_i2c_driver(dev->driver);
624 if (driver->remove) {
625 dev_dbg(dev, "remove\n");
626
627 driver->remove(client);
628 }
629
630 devres_release_group(&client->dev, client->devres_group_id);
631
632 dev_pm_domain_detach(&client->dev, true);
633
634 dev_pm_clear_wake_irq(&client->dev);
635 device_init_wakeup(&client->dev, false);
636
637 client->irq = 0;
638 if (client->flags & I2C_CLIENT_HOST_NOTIFY)
639 pm_runtime_put(&client->adapter->dev);
640}
641
642static void i2c_device_shutdown(struct device *dev)
643{
644 struct i2c_client *client = i2c_verify_client(dev);
645 struct i2c_driver *driver;
646
647 if (!client || !dev->driver)
648 return;
649 driver = to_i2c_driver(dev->driver);
650 if (driver->shutdown)
651 driver->shutdown(client);
652 else if (client->irq > 0)
653 disable_irq(client->irq);
654}
655
656static void i2c_client_dev_release(struct device *dev)
657{
658 kfree(to_i2c_client(dev));
659}
660
661static ssize_t
662name_show(struct device *dev, struct device_attribute *attr, char *buf)
663{
664 return sprintf(buf, "%s\n", dev->type == &i2c_client_type ?
665 to_i2c_client(dev)->name : to_i2c_adapter(dev)->name);
666}
667static DEVICE_ATTR_RO(name);
668
669static ssize_t
670modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
671{
672 struct i2c_client *client = to_i2c_client(dev);
673 int len;
674
675 len = of_device_modalias(dev, buf, PAGE_SIZE);
676 if (len != -ENODEV)
677 return len;
678
679 len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
680 if (len != -ENODEV)
681 return len;
682
683 return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
684}
685static DEVICE_ATTR_RO(modalias);
686
687static struct attribute *i2c_dev_attrs[] = {
688 &dev_attr_name.attr,
689 /* modalias helps coldplug: modprobe $(cat .../modalias) */
690 &dev_attr_modalias.attr,
691 NULL
692};
693ATTRIBUTE_GROUPS(i2c_dev);
694
695const struct bus_type i2c_bus_type = {
696 .name = "i2c",
697 .match = i2c_device_match,
698 .probe = i2c_device_probe,
699 .remove = i2c_device_remove,
700 .shutdown = i2c_device_shutdown,
701};
702EXPORT_SYMBOL_GPL(i2c_bus_type);
703
704struct device_type i2c_client_type = {
705 .groups = i2c_dev_groups,
706 .uevent = i2c_device_uevent,
707 .release = i2c_client_dev_release,
708};
709EXPORT_SYMBOL_GPL(i2c_client_type);
710
711
712/**
713 * i2c_verify_client - return parameter as i2c_client, or NULL
714 * @dev: device, probably from some driver model iterator
715 *
716 * When traversing the driver model tree, perhaps using driver model
717 * iterators like @device_for_each_child(), you can't assume very much
718 * about the nodes you find. Use this function to avoid oopses caused
719 * by wrongly treating some non-I2C device as an i2c_client.
720 */
721struct i2c_client *i2c_verify_client(struct device *dev)
722{
723 return (dev->type == &i2c_client_type)
724 ? to_i2c_client(dev)
725 : NULL;
726}
727EXPORT_SYMBOL(i2c_verify_client);
728
729
730/* Return a unique address which takes the flags of the client into account */
731static unsigned short i2c_encode_flags_to_addr(struct i2c_client *client)
732{
733 unsigned short addr = client->addr;
734
735 /* For some client flags, add an arbitrary offset to avoid collisions */
736 if (client->flags & I2C_CLIENT_TEN)
737 addr |= I2C_ADDR_OFFSET_TEN_BIT;
738
739 if (client->flags & I2C_CLIENT_SLAVE)
740 addr |= I2C_ADDR_OFFSET_SLAVE;
741
742 return addr;
743}
744
745/* This is a permissive address validity check, I2C address map constraints
746 * are purposely not enforced, except for the general call address. */
747static int i2c_check_addr_validity(unsigned int addr, unsigned short flags)
748{
749 if (flags & I2C_CLIENT_TEN) {
750 /* 10-bit address, all values are valid */
751 if (addr > 0x3ff)
752 return -EINVAL;
753 } else {
754 /* 7-bit address, reject the general call address */
755 if (addr == 0x00 || addr > 0x7f)
756 return -EINVAL;
757 }
758 return 0;
759}
760
761/* And this is a strict address validity check, used when probing. If a
762 * device uses a reserved address, then it shouldn't be probed. 7-bit
763 * addressing is assumed, 10-bit address devices are rare and should be
764 * explicitly enumerated. */
765int i2c_check_7bit_addr_validity_strict(unsigned short addr)
766{
767 /*
768 * Reserved addresses per I2C specification:
769 * 0x00 General call address / START byte
770 * 0x01 CBUS address
771 * 0x02 Reserved for different bus format
772 * 0x03 Reserved for future purposes
773 * 0x04-0x07 Hs-mode master code
774 * 0x78-0x7b 10-bit slave addressing
775 * 0x7c-0x7f Reserved for future purposes
776 */
777 if (addr < 0x08 || addr > 0x77)
778 return -EINVAL;
779 return 0;
780}
781
782static int __i2c_check_addr_busy(struct device *dev, void *addrp)
783{
784 struct i2c_client *client = i2c_verify_client(dev);
785 int addr = *(int *)addrp;
786
787 if (client && i2c_encode_flags_to_addr(client) == addr)
788 return -EBUSY;
789 return 0;
790}
791
792/* walk up mux tree */
793static int i2c_check_mux_parents(struct i2c_adapter *adapter, int addr)
794{
795 struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
796 int result;
797
798 result = device_for_each_child(&adapter->dev, &addr,
799 __i2c_check_addr_busy);
800
801 if (!result && parent)
802 result = i2c_check_mux_parents(parent, addr);
803
804 return result;
805}
806
807/* recurse down mux tree */
808static int i2c_check_mux_children(struct device *dev, void *addrp)
809{
810 int result;
811
812 if (dev->type == &i2c_adapter_type)
813 result = device_for_each_child(dev, addrp,
814 i2c_check_mux_children);
815 else
816 result = __i2c_check_addr_busy(dev, addrp);
817
818 return result;
819}
820
821static int i2c_check_addr_busy(struct i2c_adapter *adapter, int addr)
822{
823 struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
824 int result = 0;
825
826 if (parent)
827 result = i2c_check_mux_parents(parent, addr);
828
829 if (!result)
830 result = device_for_each_child(&adapter->dev, &addr,
831 i2c_check_mux_children);
832
833 return result;
834}
835
836/**
837 * i2c_adapter_lock_bus - Get exclusive access to an I2C bus segment
838 * @adapter: Target I2C bus segment
839 * @flags: I2C_LOCK_ROOT_ADAPTER locks the root i2c adapter, I2C_LOCK_SEGMENT
840 * locks only this branch in the adapter tree
841 */
842static void i2c_adapter_lock_bus(struct i2c_adapter *adapter,
843 unsigned int flags)
844{
845 rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));
846}
847
848/**
849 * i2c_adapter_trylock_bus - Try to get exclusive access to an I2C bus segment
850 * @adapter: Target I2C bus segment
851 * @flags: I2C_LOCK_ROOT_ADAPTER trylocks the root i2c adapter, I2C_LOCK_SEGMENT
852 * trylocks only this branch in the adapter tree
853 */
854static int i2c_adapter_trylock_bus(struct i2c_adapter *adapter,
855 unsigned int flags)
856{
857 return rt_mutex_trylock(&adapter->bus_lock);
858}
859
860/**
861 * i2c_adapter_unlock_bus - Release exclusive access to an I2C bus segment
862 * @adapter: Target I2C bus segment
863 * @flags: I2C_LOCK_ROOT_ADAPTER unlocks the root i2c adapter, I2C_LOCK_SEGMENT
864 * unlocks only this branch in the adapter tree
865 */
866static void i2c_adapter_unlock_bus(struct i2c_adapter *adapter,
867 unsigned int flags)
868{
869 rt_mutex_unlock(&adapter->bus_lock);
870}
871
872static void i2c_dev_set_name(struct i2c_adapter *adap,
873 struct i2c_client *client,
874 struct i2c_board_info const *info)
875{
876 struct acpi_device *adev = ACPI_COMPANION(&client->dev);
877
878 if (info && info->dev_name) {
879 dev_set_name(&client->dev, "i2c-%s", info->dev_name);
880 return;
881 }
882
883 if (adev) {
884 dev_set_name(&client->dev, "i2c-%s", acpi_dev_name(adev));
885 return;
886 }
887
888 dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
889 i2c_encode_flags_to_addr(client));
890}
891
892int i2c_dev_irq_from_resources(const struct resource *resources,
893 unsigned int num_resources)
894{
895 struct irq_data *irqd;
896 int i;
897
898 for (i = 0; i < num_resources; i++) {
899 const struct resource *r = &resources[i];
900
901 if (resource_type(r) != IORESOURCE_IRQ)
902 continue;
903
904 if (r->flags & IORESOURCE_BITS) {
905 irqd = irq_get_irq_data(r->start);
906 if (!irqd)
907 break;
908
909 irqd_set_trigger_type(irqd, r->flags & IORESOURCE_BITS);
910 }
911
912 return r->start;
913 }
914
915 return 0;
916}
917
918/**
919 * i2c_new_client_device - instantiate an i2c device
920 * @adap: the adapter managing the device
921 * @info: describes one I2C device; bus_num is ignored
922 * Context: can sleep
923 *
924 * Create an i2c device. Binding is handled through driver model
925 * probe()/remove() methods. A driver may be bound to this device when we
926 * return from this function, or any later moment (e.g. maybe hotplugging will
927 * load the driver module). This call is not appropriate for use by mainboard
928 * initialization logic, which usually runs during an arch_initcall() long
929 * before any i2c_adapter could exist.
930 *
931 * This returns the new i2c client, which may be saved for later use with
932 * i2c_unregister_device(); or an ERR_PTR to describe the error.
933 */
934struct i2c_client *
935i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
936{
937 struct i2c_client *client;
938 bool need_put = false;
939 int status;
940
941 client = kzalloc(sizeof *client, GFP_KERNEL);
942 if (!client)
943 return ERR_PTR(-ENOMEM);
944
945 client->adapter = adap;
946
947 client->dev.platform_data = info->platform_data;
948 client->flags = info->flags;
949 client->addr = info->addr;
950
951 client->init_irq = info->irq;
952 if (!client->init_irq)
953 client->init_irq = i2c_dev_irq_from_resources(info->resources,
954 info->num_resources);
955
956 strscpy(client->name, info->type, sizeof(client->name));
957
958 status = i2c_check_addr_validity(client->addr, client->flags);
959 if (status) {
960 dev_err(&adap->dev, "Invalid %d-bit I2C address 0x%02hx\n",
961 client->flags & I2C_CLIENT_TEN ? 10 : 7, client->addr);
962 goto out_err_silent;
963 }
964
965 /* Check for address business */
966 status = i2c_check_addr_busy(adap, i2c_encode_flags_to_addr(client));
967 if (status)
968 goto out_err;
969
970 client->dev.parent = &client->adapter->dev;
971 client->dev.bus = &i2c_bus_type;
972 client->dev.type = &i2c_client_type;
973 client->dev.of_node = of_node_get(info->of_node);
974 client->dev.fwnode = info->fwnode;
975
976 device_enable_async_suspend(&client->dev);
977
978 if (info->swnode) {
979 status = device_add_software_node(&client->dev, info->swnode);
980 if (status) {
981 dev_err(&adap->dev,
982 "Failed to add software node to client %s: %d\n",
983 client->name, status);
984 goto out_err_put_of_node;
985 }
986 }
987
988 i2c_dev_set_name(adap, client, info);
989 status = device_register(&client->dev);
990 if (status)
991 goto out_remove_swnode;
992
993 dev_dbg(&adap->dev, "client [%s] registered with bus id %s\n",
994 client->name, dev_name(&client->dev));
995
996 return client;
997
998out_remove_swnode:
999 device_remove_software_node(&client->dev);
1000 need_put = true;
1001out_err_put_of_node:
1002 of_node_put(info->of_node);
1003out_err:
1004 dev_err(&adap->dev,
1005 "Failed to register i2c client %s at 0x%02x (%d)\n",
1006 client->name, client->addr, status);
1007out_err_silent:
1008 if (need_put)
1009 put_device(&client->dev);
1010 else
1011 kfree(client);
1012 return ERR_PTR(status);
1013}
1014EXPORT_SYMBOL_GPL(i2c_new_client_device);
1015
1016/**
1017 * i2c_unregister_device - reverse effect of i2c_new_*_device()
1018 * @client: value returned from i2c_new_*_device()
1019 * Context: can sleep
1020 */
1021void i2c_unregister_device(struct i2c_client *client)
1022{
1023 if (IS_ERR_OR_NULL(client))
1024 return;
1025
1026 if (client->dev.of_node) {
1027 of_node_clear_flag(client->dev.of_node, OF_POPULATED);
1028 of_node_put(client->dev.of_node);
1029 }
1030
1031 if (ACPI_COMPANION(&client->dev))
1032 acpi_device_clear_enumerated(ACPI_COMPANION(&client->dev));
1033 device_remove_software_node(&client->dev);
1034 device_unregister(&client->dev);
1035}
1036EXPORT_SYMBOL_GPL(i2c_unregister_device);
1037
1038/**
1039 * i2c_find_device_by_fwnode() - find an i2c_client for the fwnode
1040 * @fwnode: &struct fwnode_handle corresponding to the &struct i2c_client
1041 *
1042 * Look up and return the &struct i2c_client corresponding to the @fwnode.
1043 * If no client can be found, or @fwnode is NULL, this returns NULL.
1044 *
1045 * The user must call put_device(&client->dev) once done with the i2c client.
1046 */
1047struct i2c_client *i2c_find_device_by_fwnode(struct fwnode_handle *fwnode)
1048{
1049 struct i2c_client *client;
1050 struct device *dev;
1051
1052 if (!fwnode)
1053 return NULL;
1054
1055 dev = bus_find_device_by_fwnode(&i2c_bus_type, fwnode);
1056 if (!dev)
1057 return NULL;
1058
1059 client = i2c_verify_client(dev);
1060 if (!client)
1061 put_device(dev);
1062
1063 return client;
1064}
1065EXPORT_SYMBOL(i2c_find_device_by_fwnode);
1066
1067
1068static const struct i2c_device_id dummy_id[] = {
1069 { "dummy", 0 },
1070 { },
1071};
1072
1073static int dummy_probe(struct i2c_client *client)
1074{
1075 return 0;
1076}
1077
1078static struct i2c_driver dummy_driver = {
1079 .driver.name = "dummy",
1080 .probe = dummy_probe,
1081 .id_table = dummy_id,
1082};
1083
1084/**
1085 * i2c_new_dummy_device - return a new i2c device bound to a dummy driver
1086 * @adapter: the adapter managing the device
1087 * @address: seven bit address to be used
1088 * Context: can sleep
1089 *
1090 * This returns an I2C client bound to the "dummy" driver, intended for use
1091 * with devices that consume multiple addresses. Examples of such chips
1092 * include various EEPROMS (like 24c04 and 24c08 models).
1093 *
1094 * These dummy devices have two main uses. First, most I2C and SMBus calls
1095 * except i2c_transfer() need a client handle; the dummy will be that handle.
1096 * And second, this prevents the specified address from being bound to a
1097 * different driver.
1098 *
1099 * This returns the new i2c client, which should be saved for later use with
1100 * i2c_unregister_device(); or an ERR_PTR to describe the error.
1101 */
1102struct i2c_client *i2c_new_dummy_device(struct i2c_adapter *adapter, u16 address)
1103{
1104 struct i2c_board_info info = {
1105 I2C_BOARD_INFO("dummy", address),
1106 };
1107
1108 return i2c_new_client_device(adapter, &info);
1109}
1110EXPORT_SYMBOL_GPL(i2c_new_dummy_device);
1111
1112static void devm_i2c_release_dummy(void *client)
1113{
1114 i2c_unregister_device(client);
1115}
1116
1117/**
1118 * devm_i2c_new_dummy_device - return a new i2c device bound to a dummy driver
1119 * @dev: device the managed resource is bound to
1120 * @adapter: the adapter managing the device
1121 * @address: seven bit address to be used
1122 * Context: can sleep
1123 *
1124 * This is the device-managed version of @i2c_new_dummy_device. It returns the
1125 * new i2c client or an ERR_PTR in case of an error.
1126 */
1127struct i2c_client *devm_i2c_new_dummy_device(struct device *dev,
1128 struct i2c_adapter *adapter,
1129 u16 address)
1130{
1131 struct i2c_client *client;
1132 int ret;
1133
1134 client = i2c_new_dummy_device(adapter, address);
1135 if (IS_ERR(client))
1136 return client;
1137
1138 ret = devm_add_action_or_reset(dev, devm_i2c_release_dummy, client);
1139 if (ret)
1140 return ERR_PTR(ret);
1141
1142 return client;
1143}
1144EXPORT_SYMBOL_GPL(devm_i2c_new_dummy_device);
1145
1146/**
1147 * i2c_new_ancillary_device - Helper to get the instantiated secondary address
1148 * and create the associated device
1149 * @client: Handle to the primary client
1150 * @name: Handle to specify which secondary address to get
1151 * @default_addr: Used as a fallback if no secondary address was specified
1152 * Context: can sleep
1153 *
1154 * I2C clients can be composed of multiple I2C slaves bound together in a single
1155 * component. The I2C client driver then binds to the master I2C slave and needs
1156 * to create I2C dummy clients to communicate with all the other slaves.
1157 *
1158 * This function creates and returns an I2C dummy client whose I2C address is
1159 * retrieved from the platform firmware based on the given slave name. If no
1160 * address is specified by the firmware default_addr is used.
1161 *
1162 * On DT-based platforms the address is retrieved from the "reg" property entry
1163 * cell whose "reg-names" value matches the slave name.
1164 *
1165 * This returns the new i2c client, which should be saved for later use with
1166 * i2c_unregister_device(); or an ERR_PTR to describe the error.
1167 */
1168struct i2c_client *i2c_new_ancillary_device(struct i2c_client *client,
1169 const char *name,
1170 u16 default_addr)
1171{
1172 struct device_node *np = client->dev.of_node;
1173 u32 addr = default_addr;
1174 int i;
1175
1176 if (np) {
1177 i = of_property_match_string(np, "reg-names", name);
1178 if (i >= 0)
1179 of_property_read_u32_index(np, "reg", i, &addr);
1180 }
1181
1182 dev_dbg(&client->adapter->dev, "Address for %s : 0x%x\n", name, addr);
1183 return i2c_new_dummy_device(client->adapter, addr);
1184}
1185EXPORT_SYMBOL_GPL(i2c_new_ancillary_device);
1186
1187/* ------------------------------------------------------------------------- */
1188
1189/* I2C bus adapters -- one roots each I2C or SMBUS segment */
1190
1191static void i2c_adapter_dev_release(struct device *dev)
1192{
1193 struct i2c_adapter *adap = to_i2c_adapter(dev);
1194 complete(&adap->dev_released);
1195}
1196
1197unsigned int i2c_adapter_depth(struct i2c_adapter *adapter)
1198{
1199 unsigned int depth = 0;
1200 struct device *parent;
1201
1202 for (parent = adapter->dev.parent; parent; parent = parent->parent)
1203 if (parent->type == &i2c_adapter_type)
1204 depth++;
1205
1206 WARN_ONCE(depth >= MAX_LOCKDEP_SUBCLASSES,
1207 "adapter depth exceeds lockdep subclass limit\n");
1208
1209 return depth;
1210}
1211EXPORT_SYMBOL_GPL(i2c_adapter_depth);
1212
1213/*
1214 * Let users instantiate I2C devices through sysfs. This can be used when
1215 * platform initialization code doesn't contain the proper data for
1216 * whatever reason. Also useful for drivers that do device detection and
1217 * detection fails, either because the device uses an unexpected address,
1218 * or this is a compatible device with different ID register values.
1219 *
1220 * Parameter checking may look overzealous, but we really don't want
1221 * the user to provide incorrect parameters.
1222 */
1223static ssize_t
1224new_device_store(struct device *dev, struct device_attribute *attr,
1225 const char *buf, size_t count)
1226{
1227 struct i2c_adapter *adap = to_i2c_adapter(dev);
1228 struct i2c_board_info info;
1229 struct i2c_client *client;
1230 char *blank, end;
1231 int res;
1232
1233 memset(&info, 0, sizeof(struct i2c_board_info));
1234
1235 blank = strchr(buf, ' ');
1236 if (!blank) {
1237 dev_err(dev, "%s: Missing parameters\n", "new_device");
1238 return -EINVAL;
1239 }
1240 if (blank - buf > I2C_NAME_SIZE - 1) {
1241 dev_err(dev, "%s: Invalid device name\n", "new_device");
1242 return -EINVAL;
1243 }
1244 memcpy(info.type, buf, blank - buf);
1245
1246 /* Parse remaining parameters, reject extra parameters */
1247 res = sscanf(++blank, "%hi%c", &info.addr, &end);
1248 if (res < 1) {
1249 dev_err(dev, "%s: Can't parse I2C address\n", "new_device");
1250 return -EINVAL;
1251 }
1252 if (res > 1 && end != '\n') {
1253 dev_err(dev, "%s: Extra parameters\n", "new_device");
1254 return -EINVAL;
1255 }
1256
1257 if ((info.addr & I2C_ADDR_OFFSET_TEN_BIT) == I2C_ADDR_OFFSET_TEN_BIT) {
1258 info.addr &= ~I2C_ADDR_OFFSET_TEN_BIT;
1259 info.flags |= I2C_CLIENT_TEN;
1260 }
1261
1262 if (info.addr & I2C_ADDR_OFFSET_SLAVE) {
1263 info.addr &= ~I2C_ADDR_OFFSET_SLAVE;
1264 info.flags |= I2C_CLIENT_SLAVE;
1265 }
1266
1267 client = i2c_new_client_device(adap, &info);
1268 if (IS_ERR(client))
1269 return PTR_ERR(client);
1270
1271 /* Keep track of the added device */
1272 mutex_lock(&adap->userspace_clients_lock);
1273 list_add_tail(&client->detected, &adap->userspace_clients);
1274 mutex_unlock(&adap->userspace_clients_lock);
1275 dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device",
1276 info.type, info.addr);
1277
1278 return count;
1279}
1280static DEVICE_ATTR_WO(new_device);
1281
1282/*
1283 * And of course let the users delete the devices they instantiated, if
1284 * they got it wrong. This interface can only be used to delete devices
1285 * instantiated by i2c_sysfs_new_device above. This guarantees that we
1286 * don't delete devices to which some kernel code still has references.
1287 *
1288 * Parameter checking may look overzealous, but we really don't want
1289 * the user to delete the wrong device.
1290 */
1291static ssize_t
1292delete_device_store(struct device *dev, struct device_attribute *attr,
1293 const char *buf, size_t count)
1294{
1295 struct i2c_adapter *adap = to_i2c_adapter(dev);
1296 struct i2c_client *client, *next;
1297 unsigned short addr;
1298 char end;
1299 int res;
1300
1301 /* Parse parameters, reject extra parameters */
1302 res = sscanf(buf, "%hi%c", &addr, &end);
1303 if (res < 1) {
1304 dev_err(dev, "%s: Can't parse I2C address\n", "delete_device");
1305 return -EINVAL;
1306 }
1307 if (res > 1 && end != '\n') {
1308 dev_err(dev, "%s: Extra parameters\n", "delete_device");
1309 return -EINVAL;
1310 }
1311
1312 /* Make sure the device was added through sysfs */
1313 res = -ENOENT;
1314 mutex_lock_nested(&adap->userspace_clients_lock,
1315 i2c_adapter_depth(adap));
1316 list_for_each_entry_safe(client, next, &adap->userspace_clients,
1317 detected) {
1318 if (i2c_encode_flags_to_addr(client) == addr) {
1319 dev_info(dev, "%s: Deleting device %s at 0x%02hx\n",
1320 "delete_device", client->name, client->addr);
1321
1322 list_del(&client->detected);
1323 i2c_unregister_device(client);
1324 res = count;
1325 break;
1326 }
1327 }
1328 mutex_unlock(&adap->userspace_clients_lock);
1329
1330 if (res < 0)
1331 dev_err(dev, "%s: Can't find device in list\n",
1332 "delete_device");
1333 return res;
1334}
1335static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, S_IWUSR, NULL,
1336 delete_device_store);
1337
1338static struct attribute *i2c_adapter_attrs[] = {
1339 &dev_attr_name.attr,
1340 &dev_attr_new_device.attr,
1341 &dev_attr_delete_device.attr,
1342 NULL
1343};
1344ATTRIBUTE_GROUPS(i2c_adapter);
1345
1346struct device_type i2c_adapter_type = {
1347 .groups = i2c_adapter_groups,
1348 .release = i2c_adapter_dev_release,
1349};
1350EXPORT_SYMBOL_GPL(i2c_adapter_type);
1351
1352/**
1353 * i2c_verify_adapter - return parameter as i2c_adapter or NULL
1354 * @dev: device, probably from some driver model iterator
1355 *
1356 * When traversing the driver model tree, perhaps using driver model
1357 * iterators like @device_for_each_child(), you can't assume very much
1358 * about the nodes you find. Use this function to avoid oopses caused
1359 * by wrongly treating some non-I2C device as an i2c_adapter.
1360 */
1361struct i2c_adapter *i2c_verify_adapter(struct device *dev)
1362{
1363 return (dev->type == &i2c_adapter_type)
1364 ? to_i2c_adapter(dev)
1365 : NULL;
1366}
1367EXPORT_SYMBOL(i2c_verify_adapter);
1368
1369#ifdef CONFIG_I2C_COMPAT
1370static struct class_compat *i2c_adapter_compat_class;
1371#endif
1372
1373static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
1374{
1375 struct i2c_devinfo *devinfo;
1376
1377 down_read(&__i2c_board_lock);
1378 list_for_each_entry(devinfo, &__i2c_board_list, list) {
1379 if (devinfo->busnum == adapter->nr &&
1380 IS_ERR(i2c_new_client_device(adapter, &devinfo->board_info)))
1381 dev_err(&adapter->dev,
1382 "Can't create device at 0x%02x\n",
1383 devinfo->board_info.addr);
1384 }
1385 up_read(&__i2c_board_lock);
1386}
1387
1388static int i2c_do_add_adapter(struct i2c_driver *driver,
1389 struct i2c_adapter *adap)
1390{
1391 /* Detect supported devices on that bus, and instantiate them */
1392 i2c_detect(adap, driver);
1393
1394 return 0;
1395}
1396
1397static int __process_new_adapter(struct device_driver *d, void *data)
1398{
1399 return i2c_do_add_adapter(to_i2c_driver(d), data);
1400}
1401
1402static const struct i2c_lock_operations i2c_adapter_lock_ops = {
1403 .lock_bus = i2c_adapter_lock_bus,
1404 .trylock_bus = i2c_adapter_trylock_bus,
1405 .unlock_bus = i2c_adapter_unlock_bus,
1406};
1407
1408static void i2c_host_notify_irq_teardown(struct i2c_adapter *adap)
1409{
1410 struct irq_domain *domain = adap->host_notify_domain;
1411 irq_hw_number_t hwirq;
1412
1413 if (!domain)
1414 return;
1415
1416 for (hwirq = 0 ; hwirq < I2C_ADDR_7BITS_COUNT ; hwirq++)
1417 irq_dispose_mapping(irq_find_mapping(domain, hwirq));
1418
1419 irq_domain_remove(domain);
1420 adap->host_notify_domain = NULL;
1421}
1422
1423static int i2c_host_notify_irq_map(struct irq_domain *h,
1424 unsigned int virq,
1425 irq_hw_number_t hw_irq_num)
1426{
1427 irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_simple_irq);
1428
1429 return 0;
1430}
1431
1432static const struct irq_domain_ops i2c_host_notify_irq_ops = {
1433 .map = i2c_host_notify_irq_map,
1434};
1435
1436static int i2c_setup_host_notify_irq_domain(struct i2c_adapter *adap)
1437{
1438 struct irq_domain *domain;
1439
1440 if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_HOST_NOTIFY))
1441 return 0;
1442
1443 domain = irq_domain_create_linear(adap->dev.parent->fwnode,
1444 I2C_ADDR_7BITS_COUNT,
1445 &i2c_host_notify_irq_ops, adap);
1446 if (!domain)
1447 return -ENOMEM;
1448
1449 adap->host_notify_domain = domain;
1450
1451 return 0;
1452}
1453
1454/**
1455 * i2c_handle_smbus_host_notify - Forward a Host Notify event to the correct
1456 * I2C client.
1457 * @adap: the adapter
1458 * @addr: the I2C address of the notifying device
1459 * Context: can't sleep
1460 *
1461 * Helper function to be called from an I2C bus driver's interrupt
1462 * handler. It will schedule the Host Notify IRQ.
1463 */
1464int i2c_handle_smbus_host_notify(struct i2c_adapter *adap, unsigned short addr)
1465{
1466 int irq;
1467
1468 if (!adap)
1469 return -EINVAL;
1470
1471 irq = irq_find_mapping(adap->host_notify_domain, addr);
1472 if (irq <= 0)
1473 return -ENXIO;
1474
1475 generic_handle_irq_safe(irq);
1476
1477 return 0;
1478}
1479EXPORT_SYMBOL_GPL(i2c_handle_smbus_host_notify);
1480
1481static int i2c_register_adapter(struct i2c_adapter *adap)
1482{
1483 int res = -EINVAL;
1484
1485 /* Can't register until after driver model init */
1486 if (WARN_ON(!is_registered)) {
1487 res = -EAGAIN;
1488 goto out_list;
1489 }
1490
1491 /* Sanity checks */
1492 if (WARN(!adap->name[0], "i2c adapter has no name"))
1493 goto out_list;
1494
1495 if (!adap->algo) {
1496 pr_err("adapter '%s': no algo supplied!\n", adap->name);
1497 goto out_list;
1498 }
1499
1500 if (!adap->lock_ops)
1501 adap->lock_ops = &i2c_adapter_lock_ops;
1502
1503 adap->locked_flags = 0;
1504 rt_mutex_init(&adap->bus_lock);
1505 rt_mutex_init(&adap->mux_lock);
1506 mutex_init(&adap->userspace_clients_lock);
1507 INIT_LIST_HEAD(&adap->userspace_clients);
1508
1509 /* Set default timeout to 1 second if not already set */
1510 if (adap->timeout == 0)
1511 adap->timeout = HZ;
1512
1513 /* register soft irqs for Host Notify */
1514 res = i2c_setup_host_notify_irq_domain(adap);
1515 if (res) {
1516 pr_err("adapter '%s': can't create Host Notify IRQs (%d)\n",
1517 adap->name, res);
1518 goto out_list;
1519 }
1520
1521 dev_set_name(&adap->dev, "i2c-%d", adap->nr);
1522 adap->dev.bus = &i2c_bus_type;
1523 adap->dev.type = &i2c_adapter_type;
1524 res = device_register(&adap->dev);
1525 if (res) {
1526 pr_err("adapter '%s': can't register device (%d)\n", adap->name, res);
1527 goto out_list;
1528 }
1529
1530 adap->debugfs = debugfs_create_dir(dev_name(&adap->dev), i2c_debugfs_root);
1531
1532 res = i2c_setup_smbus_alert(adap);
1533 if (res)
1534 goto out_reg;
1535
1536 device_enable_async_suspend(&adap->dev);
1537 pm_runtime_no_callbacks(&adap->dev);
1538 pm_suspend_ignore_children(&adap->dev, true);
1539 pm_runtime_enable(&adap->dev);
1540
1541 res = i2c_init_recovery(adap);
1542 if (res == -EPROBE_DEFER)
1543 goto out_reg;
1544
1545 dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
1546
1547#ifdef CONFIG_I2C_COMPAT
1548 res = class_compat_create_link(i2c_adapter_compat_class, &adap->dev,
1549 adap->dev.parent);
1550 if (res)
1551 dev_warn(&adap->dev,
1552 "Failed to create compatibility class link\n");
1553#endif
1554
1555 /* create pre-declared device nodes */
1556 of_i2c_register_devices(adap);
1557 i2c_acpi_install_space_handler(adap);
1558 i2c_acpi_register_devices(adap);
1559
1560 if (adap->nr < __i2c_first_dynamic_bus_num)
1561 i2c_scan_static_board_info(adap);
1562
1563 /* Notify drivers */
1564 mutex_lock(&core_lock);
1565 bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter);
1566 mutex_unlock(&core_lock);
1567
1568 return 0;
1569
1570out_reg:
1571 debugfs_remove_recursive(adap->debugfs);
1572 init_completion(&adap->dev_released);
1573 device_unregister(&adap->dev);
1574 wait_for_completion(&adap->dev_released);
1575out_list:
1576 mutex_lock(&core_lock);
1577 idr_remove(&i2c_adapter_idr, adap->nr);
1578 mutex_unlock(&core_lock);
1579 return res;
1580}
1581
1582/**
1583 * __i2c_add_numbered_adapter - i2c_add_numbered_adapter where nr is never -1
1584 * @adap: the adapter to register (with adap->nr initialized)
1585 * Context: can sleep
1586 *
1587 * See i2c_add_numbered_adapter() for details.
1588 */
1589static int __i2c_add_numbered_adapter(struct i2c_adapter *adap)
1590{
1591 int id;
1592
1593 mutex_lock(&core_lock);
1594 id = idr_alloc(&i2c_adapter_idr, adap, adap->nr, adap->nr + 1, GFP_KERNEL);
1595 mutex_unlock(&core_lock);
1596 if (WARN(id < 0, "couldn't get idr"))
1597 return id == -ENOSPC ? -EBUSY : id;
1598
1599 return i2c_register_adapter(adap);
1600}
1601
1602/**
1603 * i2c_add_adapter - declare i2c adapter, use dynamic bus number
1604 * @adapter: the adapter to add
1605 * Context: can sleep
1606 *
1607 * This routine is used to declare an I2C adapter when its bus number
1608 * doesn't matter or when its bus number is specified by an dt alias.
1609 * Examples of bases when the bus number doesn't matter: I2C adapters
1610 * dynamically added by USB links or PCI plugin cards.
1611 *
1612 * When this returns zero, a new bus number was allocated and stored
1613 * in adap->nr, and the specified adapter became available for clients.
1614 * Otherwise, a negative errno value is returned.
1615 */
1616int i2c_add_adapter(struct i2c_adapter *adapter)
1617{
1618 struct device *dev = &adapter->dev;
1619 int id;
1620
1621 if (dev->of_node) {
1622 id = of_alias_get_id(dev->of_node, "i2c");
1623 if (id >= 0) {
1624 adapter->nr = id;
1625 return __i2c_add_numbered_adapter(adapter);
1626 }
1627 }
1628
1629 mutex_lock(&core_lock);
1630 id = idr_alloc(&i2c_adapter_idr, adapter,
1631 __i2c_first_dynamic_bus_num, 0, GFP_KERNEL);
1632 mutex_unlock(&core_lock);
1633 if (WARN(id < 0, "couldn't get idr"))
1634 return id;
1635
1636 adapter->nr = id;
1637
1638 return i2c_register_adapter(adapter);
1639}
1640EXPORT_SYMBOL(i2c_add_adapter);
1641
1642/**
1643 * i2c_add_numbered_adapter - declare i2c adapter, use static bus number
1644 * @adap: the adapter to register (with adap->nr initialized)
1645 * Context: can sleep
1646 *
1647 * This routine is used to declare an I2C adapter when its bus number
1648 * matters. For example, use it for I2C adapters from system-on-chip CPUs,
1649 * or otherwise built in to the system's mainboard, and where i2c_board_info
1650 * is used to properly configure I2C devices.
1651 *
1652 * If the requested bus number is set to -1, then this function will behave
1653 * identically to i2c_add_adapter, and will dynamically assign a bus number.
1654 *
1655 * If no devices have pre-been declared for this bus, then be sure to
1656 * register the adapter before any dynamically allocated ones. Otherwise
1657 * the required bus ID may not be available.
1658 *
1659 * When this returns zero, the specified adapter became available for
1660 * clients using the bus number provided in adap->nr. Also, the table
1661 * of I2C devices pre-declared using i2c_register_board_info() is scanned,
1662 * and the appropriate driver model device nodes are created. Otherwise, a
1663 * negative errno value is returned.
1664 */
1665int i2c_add_numbered_adapter(struct i2c_adapter *adap)
1666{
1667 if (adap->nr == -1) /* -1 means dynamically assign bus id */
1668 return i2c_add_adapter(adap);
1669
1670 return __i2c_add_numbered_adapter(adap);
1671}
1672EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter);
1673
1674static void i2c_do_del_adapter(struct i2c_driver *driver,
1675 struct i2c_adapter *adapter)
1676{
1677 struct i2c_client *client, *_n;
1678
1679 /* Remove the devices we created ourselves as the result of hardware
1680 * probing (using a driver's detect method) */
1681 list_for_each_entry_safe(client, _n, &driver->clients, detected) {
1682 if (client->adapter == adapter) {
1683 dev_dbg(&adapter->dev, "Removing %s at 0x%x\n",
1684 client->name, client->addr);
1685 list_del(&client->detected);
1686 i2c_unregister_device(client);
1687 }
1688 }
1689}
1690
1691static int __unregister_client(struct device *dev, void *dummy)
1692{
1693 struct i2c_client *client = i2c_verify_client(dev);
1694 if (client && strcmp(client->name, "dummy"))
1695 i2c_unregister_device(client);
1696 return 0;
1697}
1698
1699static int __unregister_dummy(struct device *dev, void *dummy)
1700{
1701 struct i2c_client *client = i2c_verify_client(dev);
1702 i2c_unregister_device(client);
1703 return 0;
1704}
1705
1706static int __process_removed_adapter(struct device_driver *d, void *data)
1707{
1708 i2c_do_del_adapter(to_i2c_driver(d), data);
1709 return 0;
1710}
1711
1712/**
1713 * i2c_del_adapter - unregister I2C adapter
1714 * @adap: the adapter being unregistered
1715 * Context: can sleep
1716 *
1717 * This unregisters an I2C adapter which was previously registered
1718 * by @i2c_add_adapter or @i2c_add_numbered_adapter.
1719 */
1720void i2c_del_adapter(struct i2c_adapter *adap)
1721{
1722 struct i2c_adapter *found;
1723 struct i2c_client *client, *next;
1724
1725 /* First make sure that this adapter was ever added */
1726 mutex_lock(&core_lock);
1727 found = idr_find(&i2c_adapter_idr, adap->nr);
1728 mutex_unlock(&core_lock);
1729 if (found != adap) {
1730 pr_debug("attempting to delete unregistered adapter [%s]\n", adap->name);
1731 return;
1732 }
1733
1734 i2c_acpi_remove_space_handler(adap);
1735 /* Tell drivers about this removal */
1736 mutex_lock(&core_lock);
1737 bus_for_each_drv(&i2c_bus_type, NULL, adap,
1738 __process_removed_adapter);
1739 mutex_unlock(&core_lock);
1740
1741 /* Remove devices instantiated from sysfs */
1742 mutex_lock_nested(&adap->userspace_clients_lock,
1743 i2c_adapter_depth(adap));
1744 list_for_each_entry_safe(client, next, &adap->userspace_clients,
1745 detected) {
1746 dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name,
1747 client->addr);
1748 list_del(&client->detected);
1749 i2c_unregister_device(client);
1750 }
1751 mutex_unlock(&adap->userspace_clients_lock);
1752
1753 /* Detach any active clients. This can't fail, thus we do not
1754 * check the returned value. This is a two-pass process, because
1755 * we can't remove the dummy devices during the first pass: they
1756 * could have been instantiated by real devices wishing to clean
1757 * them up properly, so we give them a chance to do that first. */
1758 device_for_each_child(&adap->dev, NULL, __unregister_client);
1759 device_for_each_child(&adap->dev, NULL, __unregister_dummy);
1760
1761#ifdef CONFIG_I2C_COMPAT
1762 class_compat_remove_link(i2c_adapter_compat_class, &adap->dev,
1763 adap->dev.parent);
1764#endif
1765
1766 /* device name is gone after device_unregister */
1767 dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
1768
1769 pm_runtime_disable(&adap->dev);
1770
1771 i2c_host_notify_irq_teardown(adap);
1772
1773 debugfs_remove_recursive(adap->debugfs);
1774
1775 /* wait until all references to the device are gone
1776 *
1777 * FIXME: This is old code and should ideally be replaced by an
1778 * alternative which results in decoupling the lifetime of the struct
1779 * device from the i2c_adapter, like spi or netdev do. Any solution
1780 * should be thoroughly tested with DEBUG_KOBJECT_RELEASE enabled!
1781 */
1782 init_completion(&adap->dev_released);
1783 device_unregister(&adap->dev);
1784 wait_for_completion(&adap->dev_released);
1785
1786 /* free bus id */
1787 mutex_lock(&core_lock);
1788 idr_remove(&i2c_adapter_idr, adap->nr);
1789 mutex_unlock(&core_lock);
1790
1791 /* Clear the device structure in case this adapter is ever going to be
1792 added again */
1793 memset(&adap->dev, 0, sizeof(adap->dev));
1794}
1795EXPORT_SYMBOL(i2c_del_adapter);
1796
1797static void devm_i2c_del_adapter(void *adapter)
1798{
1799 i2c_del_adapter(adapter);
1800}
1801
1802/**
1803 * devm_i2c_add_adapter - device-managed variant of i2c_add_adapter()
1804 * @dev: managing device for adding this I2C adapter
1805 * @adapter: the adapter to add
1806 * Context: can sleep
1807 *
1808 * Add adapter with dynamic bus number, same with i2c_add_adapter()
1809 * but the adapter will be auto deleted on driver detach.
1810 */
1811int devm_i2c_add_adapter(struct device *dev, struct i2c_adapter *adapter)
1812{
1813 int ret;
1814
1815 ret = i2c_add_adapter(adapter);
1816 if (ret)
1817 return ret;
1818
1819 return devm_add_action_or_reset(dev, devm_i2c_del_adapter, adapter);
1820}
1821EXPORT_SYMBOL_GPL(devm_i2c_add_adapter);
1822
1823static int i2c_dev_or_parent_fwnode_match(struct device *dev, const void *data)
1824{
1825 if (dev_fwnode(dev) == data)
1826 return 1;
1827
1828 if (dev->parent && dev_fwnode(dev->parent) == data)
1829 return 1;
1830
1831 return 0;
1832}
1833
1834/**
1835 * i2c_find_adapter_by_fwnode() - find an i2c_adapter for the fwnode
1836 * @fwnode: &struct fwnode_handle corresponding to the &struct i2c_adapter
1837 *
1838 * Look up and return the &struct i2c_adapter corresponding to the @fwnode.
1839 * If no adapter can be found, or @fwnode is NULL, this returns NULL.
1840 *
1841 * The user must call put_device(&adapter->dev) once done with the i2c adapter.
1842 */
1843struct i2c_adapter *i2c_find_adapter_by_fwnode(struct fwnode_handle *fwnode)
1844{
1845 struct i2c_adapter *adapter;
1846 struct device *dev;
1847
1848 if (!fwnode)
1849 return NULL;
1850
1851 dev = bus_find_device(&i2c_bus_type, NULL, fwnode,
1852 i2c_dev_or_parent_fwnode_match);
1853 if (!dev)
1854 return NULL;
1855
1856 adapter = i2c_verify_adapter(dev);
1857 if (!adapter)
1858 put_device(dev);
1859
1860 return adapter;
1861}
1862EXPORT_SYMBOL(i2c_find_adapter_by_fwnode);
1863
1864/**
1865 * i2c_get_adapter_by_fwnode() - find an i2c_adapter for the fwnode
1866 * @fwnode: &struct fwnode_handle corresponding to the &struct i2c_adapter
1867 *
1868 * Look up and return the &struct i2c_adapter corresponding to the @fwnode,
1869 * and increment the adapter module's use count. If no adapter can be found,
1870 * or @fwnode is NULL, this returns NULL.
1871 *
1872 * The user must call i2c_put_adapter(adapter) once done with the i2c adapter.
1873 * Note that this is different from i2c_find_adapter_by_node().
1874 */
1875struct i2c_adapter *i2c_get_adapter_by_fwnode(struct fwnode_handle *fwnode)
1876{
1877 struct i2c_adapter *adapter;
1878
1879 adapter = i2c_find_adapter_by_fwnode(fwnode);
1880 if (!adapter)
1881 return NULL;
1882
1883 if (!try_module_get(adapter->owner)) {
1884 put_device(&adapter->dev);
1885 adapter = NULL;
1886 }
1887
1888 return adapter;
1889}
1890EXPORT_SYMBOL(i2c_get_adapter_by_fwnode);
1891
1892static void i2c_parse_timing(struct device *dev, char *prop_name, u32 *cur_val_p,
1893 u32 def_val, bool use_def)
1894{
1895 int ret;
1896
1897 ret = device_property_read_u32(dev, prop_name, cur_val_p);
1898 if (ret && use_def)
1899 *cur_val_p = def_val;
1900
1901 dev_dbg(dev, "%s: %u\n", prop_name, *cur_val_p);
1902}
1903
1904/**
1905 * i2c_parse_fw_timings - get I2C related timing parameters from firmware
1906 * @dev: The device to scan for I2C timing properties
1907 * @t: the i2c_timings struct to be filled with values
1908 * @use_defaults: bool to use sane defaults derived from the I2C specification
1909 * when properties are not found, otherwise don't update
1910 *
1911 * Scan the device for the generic I2C properties describing timing parameters
1912 * for the signal and fill the given struct with the results. If a property was
1913 * not found and use_defaults was true, then maximum timings are assumed which
1914 * are derived from the I2C specification. If use_defaults is not used, the
1915 * results will be as before, so drivers can apply their own defaults before
1916 * calling this helper. The latter is mainly intended for avoiding regressions
1917 * of existing drivers which want to switch to this function. New drivers
1918 * almost always should use the defaults.
1919 */
1920void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults)
1921{
1922 bool u = use_defaults;
1923 u32 d;
1924
1925 i2c_parse_timing(dev, "clock-frequency", &t->bus_freq_hz,
1926 I2C_MAX_STANDARD_MODE_FREQ, u);
1927
1928 d = t->bus_freq_hz <= I2C_MAX_STANDARD_MODE_FREQ ? 1000 :
1929 t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ ? 300 : 120;
1930 i2c_parse_timing(dev, "i2c-scl-rising-time-ns", &t->scl_rise_ns, d, u);
1931
1932 d = t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ ? 300 : 120;
1933 i2c_parse_timing(dev, "i2c-scl-falling-time-ns", &t->scl_fall_ns, d, u);
1934
1935 i2c_parse_timing(dev, "i2c-scl-internal-delay-ns",
1936 &t->scl_int_delay_ns, 0, u);
1937 i2c_parse_timing(dev, "i2c-sda-falling-time-ns", &t->sda_fall_ns,
1938 t->scl_fall_ns, u);
1939 i2c_parse_timing(dev, "i2c-sda-hold-time-ns", &t->sda_hold_ns, 0, u);
1940 i2c_parse_timing(dev, "i2c-digital-filter-width-ns",
1941 &t->digital_filter_width_ns, 0, u);
1942 i2c_parse_timing(dev, "i2c-analog-filter-cutoff-frequency",
1943 &t->analog_filter_cutoff_freq_hz, 0, u);
1944}
1945EXPORT_SYMBOL_GPL(i2c_parse_fw_timings);
1946
1947/* ------------------------------------------------------------------------- */
1948
1949int i2c_for_each_dev(void *data, int (*fn)(struct device *dev, void *data))
1950{
1951 int res;
1952
1953 mutex_lock(&core_lock);
1954 res = bus_for_each_dev(&i2c_bus_type, NULL, data, fn);
1955 mutex_unlock(&core_lock);
1956
1957 return res;
1958}
1959EXPORT_SYMBOL_GPL(i2c_for_each_dev);
1960
1961static int __process_new_driver(struct device *dev, void *data)
1962{
1963 if (dev->type != &i2c_adapter_type)
1964 return 0;
1965 return i2c_do_add_adapter(data, to_i2c_adapter(dev));
1966}
1967
1968/*
1969 * An i2c_driver is used with one or more i2c_client (device) nodes to access
1970 * i2c slave chips, on a bus instance associated with some i2c_adapter.
1971 */
1972
1973int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
1974{
1975 int res;
1976
1977 /* Can't register until after driver model init */
1978 if (WARN_ON(!is_registered))
1979 return -EAGAIN;
1980
1981 /* add the driver to the list of i2c drivers in the driver core */
1982 driver->driver.owner = owner;
1983 driver->driver.bus = &i2c_bus_type;
1984 INIT_LIST_HEAD(&driver->clients);
1985
1986 /* When registration returns, the driver core
1987 * will have called probe() for all matching-but-unbound devices.
1988 */
1989 res = driver_register(&driver->driver);
1990 if (res)
1991 return res;
1992
1993 pr_debug("driver [%s] registered\n", driver->driver.name);
1994
1995 /* Walk the adapters that are already present */
1996 i2c_for_each_dev(driver, __process_new_driver);
1997
1998 return 0;
1999}
2000EXPORT_SYMBOL(i2c_register_driver);
2001
2002static int __process_removed_driver(struct device *dev, void *data)
2003{
2004 if (dev->type == &i2c_adapter_type)
2005 i2c_do_del_adapter(data, to_i2c_adapter(dev));
2006 return 0;
2007}
2008
2009/**
2010 * i2c_del_driver - unregister I2C driver
2011 * @driver: the driver being unregistered
2012 * Context: can sleep
2013 */
2014void i2c_del_driver(struct i2c_driver *driver)
2015{
2016 i2c_for_each_dev(driver, __process_removed_driver);
2017
2018 driver_unregister(&driver->driver);
2019 pr_debug("driver [%s] unregistered\n", driver->driver.name);
2020}
2021EXPORT_SYMBOL(i2c_del_driver);
2022
2023/* ------------------------------------------------------------------------- */
2024
2025struct i2c_cmd_arg {
2026 unsigned cmd;
2027 void *arg;
2028};
2029
2030static int i2c_cmd(struct device *dev, void *_arg)
2031{
2032 struct i2c_client *client = i2c_verify_client(dev);
2033 struct i2c_cmd_arg *arg = _arg;
2034 struct i2c_driver *driver;
2035
2036 if (!client || !client->dev.driver)
2037 return 0;
2038
2039 driver = to_i2c_driver(client->dev.driver);
2040 if (driver->command)
2041 driver->command(client, arg->cmd, arg->arg);
2042 return 0;
2043}
2044
2045void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg)
2046{
2047 struct i2c_cmd_arg cmd_arg;
2048
2049 cmd_arg.cmd = cmd;
2050 cmd_arg.arg = arg;
2051 device_for_each_child(&adap->dev, &cmd_arg, i2c_cmd);
2052}
2053EXPORT_SYMBOL(i2c_clients_command);
2054
2055static int __init i2c_init(void)
2056{
2057 int retval;
2058
2059 retval = of_alias_get_highest_id("i2c");
2060
2061 down_write(&__i2c_board_lock);
2062 if (retval >= __i2c_first_dynamic_bus_num)
2063 __i2c_first_dynamic_bus_num = retval + 1;
2064 up_write(&__i2c_board_lock);
2065
2066 retval = bus_register(&i2c_bus_type);
2067 if (retval)
2068 return retval;
2069
2070 is_registered = true;
2071
2072 i2c_debugfs_root = debugfs_create_dir("i2c", NULL);
2073
2074#ifdef CONFIG_I2C_COMPAT
2075 i2c_adapter_compat_class = class_compat_register("i2c-adapter");
2076 if (!i2c_adapter_compat_class) {
2077 retval = -ENOMEM;
2078 goto bus_err;
2079 }
2080#endif
2081 retval = i2c_add_driver(&dummy_driver);
2082 if (retval)
2083 goto class_err;
2084
2085 if (IS_ENABLED(CONFIG_OF_DYNAMIC))
2086 WARN_ON(of_reconfig_notifier_register(&i2c_of_notifier));
2087 if (IS_ENABLED(CONFIG_ACPI))
2088 WARN_ON(acpi_reconfig_notifier_register(&i2c_acpi_notifier));
2089
2090 return 0;
2091
2092class_err:
2093#ifdef CONFIG_I2C_COMPAT
2094 class_compat_unregister(i2c_adapter_compat_class);
2095bus_err:
2096#endif
2097 is_registered = false;
2098 bus_unregister(&i2c_bus_type);
2099 return retval;
2100}
2101
2102static void __exit i2c_exit(void)
2103{
2104 if (IS_ENABLED(CONFIG_ACPI))
2105 WARN_ON(acpi_reconfig_notifier_unregister(&i2c_acpi_notifier));
2106 if (IS_ENABLED(CONFIG_OF_DYNAMIC))
2107 WARN_ON(of_reconfig_notifier_unregister(&i2c_of_notifier));
2108 i2c_del_driver(&dummy_driver);
2109#ifdef CONFIG_I2C_COMPAT
2110 class_compat_unregister(i2c_adapter_compat_class);
2111#endif
2112 debugfs_remove_recursive(i2c_debugfs_root);
2113 bus_unregister(&i2c_bus_type);
2114 tracepoint_synchronize_unregister();
2115}
2116
2117/* We must initialize early, because some subsystems register i2c drivers
2118 * in subsys_initcall() code, but are linked (and initialized) before i2c.
2119 */
2120postcore_initcall(i2c_init);
2121module_exit(i2c_exit);
2122
2123/* ----------------------------------------------------
2124 * the functional interface to the i2c busses.
2125 * ----------------------------------------------------
2126 */
2127
2128/* Check if val is exceeding the quirk IFF quirk is non 0 */
2129#define i2c_quirk_exceeded(val, quirk) ((quirk) && ((val) > (quirk)))
2130
2131static int i2c_quirk_error(struct i2c_adapter *adap, struct i2c_msg *msg, char *err_msg)
2132{
2133 dev_err_ratelimited(&adap->dev, "adapter quirk: %s (addr 0x%04x, size %u, %s)\n",
2134 err_msg, msg->addr, msg->len,
2135 msg->flags & I2C_M_RD ? "read" : "write");
2136 return -EOPNOTSUPP;
2137}
2138
2139static int i2c_check_for_quirks(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
2140{
2141 const struct i2c_adapter_quirks *q = adap->quirks;
2142 int max_num = q->max_num_msgs, i;
2143 bool do_len_check = true;
2144
2145 if (q->flags & I2C_AQ_COMB) {
2146 max_num = 2;
2147
2148 /* special checks for combined messages */
2149 if (num == 2) {
2150 if (q->flags & I2C_AQ_COMB_WRITE_FIRST && msgs[0].flags & I2C_M_RD)
2151 return i2c_quirk_error(adap, &msgs[0], "1st comb msg must be write");
2152
2153 if (q->flags & I2C_AQ_COMB_READ_SECOND && !(msgs[1].flags & I2C_M_RD))
2154 return i2c_quirk_error(adap, &msgs[1], "2nd comb msg must be read");
2155
2156 if (q->flags & I2C_AQ_COMB_SAME_ADDR && msgs[0].addr != msgs[1].addr)
2157 return i2c_quirk_error(adap, &msgs[0], "comb msg only to same addr");
2158
2159 if (i2c_quirk_exceeded(msgs[0].len, q->max_comb_1st_msg_len))
2160 return i2c_quirk_error(adap, &msgs[0], "msg too long");
2161
2162 if (i2c_quirk_exceeded(msgs[1].len, q->max_comb_2nd_msg_len))
2163 return i2c_quirk_error(adap, &msgs[1], "msg too long");
2164
2165 do_len_check = false;
2166 }
2167 }
2168
2169 if (i2c_quirk_exceeded(num, max_num))
2170 return i2c_quirk_error(adap, &msgs[0], "too many messages");
2171
2172 for (i = 0; i < num; i++) {
2173 u16 len = msgs[i].len;
2174
2175 if (msgs[i].flags & I2C_M_RD) {
2176 if (do_len_check && i2c_quirk_exceeded(len, q->max_read_len))
2177 return i2c_quirk_error(adap, &msgs[i], "msg too long");
2178
2179 if (q->flags & I2C_AQ_NO_ZERO_LEN_READ && len == 0)
2180 return i2c_quirk_error(adap, &msgs[i], "no zero length");
2181 } else {
2182 if (do_len_check && i2c_quirk_exceeded(len, q->max_write_len))
2183 return i2c_quirk_error(adap, &msgs[i], "msg too long");
2184
2185 if (q->flags & I2C_AQ_NO_ZERO_LEN_WRITE && len == 0)
2186 return i2c_quirk_error(adap, &msgs[i], "no zero length");
2187 }
2188 }
2189
2190 return 0;
2191}
2192
2193/**
2194 * __i2c_transfer - unlocked flavor of i2c_transfer
2195 * @adap: Handle to I2C bus
2196 * @msgs: One or more messages to execute before STOP is issued to
2197 * terminate the operation; each message begins with a START.
2198 * @num: Number of messages to be executed.
2199 *
2200 * Returns negative errno, else the number of messages executed.
2201 *
2202 * Adapter lock must be held when calling this function. No debug logging
2203 * takes place. adap->algo->master_xfer existence isn't checked.
2204 */
2205int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
2206{
2207 unsigned long orig_jiffies;
2208 int ret, try;
2209
2210 if (WARN_ON(!msgs || num < 1))
2211 return -EINVAL;
2212
2213 ret = __i2c_check_suspended(adap);
2214 if (ret)
2215 return ret;
2216
2217 if (adap->quirks && i2c_check_for_quirks(adap, msgs, num))
2218 return -EOPNOTSUPP;
2219
2220 /*
2221 * i2c_trace_msg_key gets enabled when tracepoint i2c_transfer gets
2222 * enabled. This is an efficient way of keeping the for-loop from
2223 * being executed when not needed.
2224 */
2225 if (static_branch_unlikely(&i2c_trace_msg_key)) {
2226 int i;
2227 for (i = 0; i < num; i++)
2228 if (msgs[i].flags & I2C_M_RD)
2229 trace_i2c_read(adap, &msgs[i], i);
2230 else
2231 trace_i2c_write(adap, &msgs[i], i);
2232 }
2233
2234 /* Retry automatically on arbitration loss */
2235 orig_jiffies = jiffies;
2236 for (ret = 0, try = 0; try <= adap->retries; try++) {
2237 if (i2c_in_atomic_xfer_mode() && adap->algo->master_xfer_atomic)
2238 ret = adap->algo->master_xfer_atomic(adap, msgs, num);
2239 else
2240 ret = adap->algo->master_xfer(adap, msgs, num);
2241
2242 if (ret != -EAGAIN)
2243 break;
2244 if (time_after(jiffies, orig_jiffies + adap->timeout))
2245 break;
2246 }
2247
2248 if (static_branch_unlikely(&i2c_trace_msg_key)) {
2249 int i;
2250 for (i = 0; i < ret; i++)
2251 if (msgs[i].flags & I2C_M_RD)
2252 trace_i2c_reply(adap, &msgs[i], i);
2253 trace_i2c_result(adap, num, ret);
2254 }
2255
2256 return ret;
2257}
2258EXPORT_SYMBOL(__i2c_transfer);
2259
2260/**
2261 * i2c_transfer - execute a single or combined I2C message
2262 * @adap: Handle to I2C bus
2263 * @msgs: One or more messages to execute before STOP is issued to
2264 * terminate the operation; each message begins with a START.
2265 * @num: Number of messages to be executed.
2266 *
2267 * Returns negative errno, else the number of messages executed.
2268 *
2269 * Note that there is no requirement that each message be sent to
2270 * the same slave address, although that is the most common model.
2271 */
2272int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
2273{
2274 int ret;
2275
2276 if (!adap->algo->master_xfer) {
2277 dev_dbg(&adap->dev, "I2C level transfers not supported\n");
2278 return -EOPNOTSUPP;
2279 }
2280
2281 /* REVISIT the fault reporting model here is weak:
2282 *
2283 * - When we get an error after receiving N bytes from a slave,
2284 * there is no way to report "N".
2285 *
2286 * - When we get a NAK after transmitting N bytes to a slave,
2287 * there is no way to report "N" ... or to let the master
2288 * continue executing the rest of this combined message, if
2289 * that's the appropriate response.
2290 *
2291 * - When for example "num" is two and we successfully complete
2292 * the first message but get an error part way through the
2293 * second, it's unclear whether that should be reported as
2294 * one (discarding status on the second message) or errno
2295 * (discarding status on the first one).
2296 */
2297 ret = __i2c_lock_bus_helper(adap);
2298 if (ret)
2299 return ret;
2300
2301 ret = __i2c_transfer(adap, msgs, num);
2302 i2c_unlock_bus(adap, I2C_LOCK_SEGMENT);
2303
2304 return ret;
2305}
2306EXPORT_SYMBOL(i2c_transfer);
2307
2308/**
2309 * i2c_transfer_buffer_flags - issue a single I2C message transferring data
2310 * to/from a buffer
2311 * @client: Handle to slave device
2312 * @buf: Where the data is stored
2313 * @count: How many bytes to transfer, must be less than 64k since msg.len is u16
2314 * @flags: The flags to be used for the message, e.g. I2C_M_RD for reads
2315 *
2316 * Returns negative errno, or else the number of bytes transferred.
2317 */
2318int i2c_transfer_buffer_flags(const struct i2c_client *client, char *buf,
2319 int count, u16 flags)
2320{
2321 int ret;
2322 struct i2c_msg msg = {
2323 .addr = client->addr,
2324 .flags = flags | (client->flags & I2C_M_TEN),
2325 .len = count,
2326 .buf = buf,
2327 };
2328
2329 ret = i2c_transfer(client->adapter, &msg, 1);
2330
2331 /*
2332 * If everything went ok (i.e. 1 msg transferred), return #bytes
2333 * transferred, else error code.
2334 */
2335 return (ret == 1) ? count : ret;
2336}
2337EXPORT_SYMBOL(i2c_transfer_buffer_flags);
2338
2339/**
2340 * i2c_get_device_id - get manufacturer, part id and die revision of a device
2341 * @client: The device to query
2342 * @id: The queried information
2343 *
2344 * Returns negative errno on error, zero on success.
2345 */
2346int i2c_get_device_id(const struct i2c_client *client,
2347 struct i2c_device_identity *id)
2348{
2349 struct i2c_adapter *adap = client->adapter;
2350 union i2c_smbus_data raw_id;
2351 int ret;
2352
2353 if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
2354 return -EOPNOTSUPP;
2355
2356 raw_id.block[0] = 3;
2357 ret = i2c_smbus_xfer(adap, I2C_ADDR_DEVICE_ID, 0,
2358 I2C_SMBUS_READ, client->addr << 1,
2359 I2C_SMBUS_I2C_BLOCK_DATA, &raw_id);
2360 if (ret)
2361 return ret;
2362
2363 id->manufacturer_id = (raw_id.block[1] << 4) | (raw_id.block[2] >> 4);
2364 id->part_id = ((raw_id.block[2] & 0xf) << 5) | (raw_id.block[3] >> 3);
2365 id->die_revision = raw_id.block[3] & 0x7;
2366 return 0;
2367}
2368EXPORT_SYMBOL_GPL(i2c_get_device_id);
2369
2370/**
2371 * i2c_client_get_device_id - get the driver match table entry of a device
2372 * @client: the device to query. The device must be bound to a driver
2373 *
2374 * Returns a pointer to the matching entry if found, NULL otherwise.
2375 */
2376const struct i2c_device_id *i2c_client_get_device_id(const struct i2c_client *client)
2377{
2378 const struct i2c_driver *drv = to_i2c_driver(client->dev.driver);
2379
2380 return i2c_match_id(drv->id_table, client);
2381}
2382EXPORT_SYMBOL_GPL(i2c_client_get_device_id);
2383
2384/* ----------------------------------------------------
2385 * the i2c address scanning function
2386 * Will not work for 10-bit addresses!
2387 * ----------------------------------------------------
2388 */
2389
2390/*
2391 * Legacy default probe function, mostly relevant for SMBus. The default
2392 * probe method is a quick write, but it is known to corrupt the 24RF08
2393 * EEPROMs due to a state machine bug, and could also irreversibly
2394 * write-protect some EEPROMs, so for address ranges 0x30-0x37 and 0x50-0x5f,
2395 * we use a short byte read instead. Also, some bus drivers don't implement
2396 * quick write, so we fallback to a byte read in that case too.
2397 * On x86, there is another special case for FSC hardware monitoring chips,
2398 * which want regular byte reads (address 0x73.) Fortunately, these are the
2399 * only known chips using this I2C address on PC hardware.
2400 * Returns 1 if probe succeeded, 0 if not.
2401 */
2402static int i2c_default_probe(struct i2c_adapter *adap, unsigned short addr)
2403{
2404 int err;
2405 union i2c_smbus_data dummy;
2406
2407#ifdef CONFIG_X86
2408 if (addr == 0x73 && (adap->class & I2C_CLASS_HWMON)
2409 && i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE_DATA))
2410 err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
2411 I2C_SMBUS_BYTE_DATA, &dummy);
2412 else
2413#endif
2414 if (!((addr & ~0x07) == 0x30 || (addr & ~0x0f) == 0x50)
2415 && i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK))
2416 err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_WRITE, 0,
2417 I2C_SMBUS_QUICK, NULL);
2418 else if (i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE))
2419 err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
2420 I2C_SMBUS_BYTE, &dummy);
2421 else {
2422 dev_warn(&adap->dev, "No suitable probing method supported for address 0x%02X\n",
2423 addr);
2424 err = -EOPNOTSUPP;
2425 }
2426
2427 return err >= 0;
2428}
2429
2430static int i2c_detect_address(struct i2c_client *temp_client,
2431 struct i2c_driver *driver)
2432{
2433 struct i2c_board_info info;
2434 struct i2c_adapter *adapter = temp_client->adapter;
2435 int addr = temp_client->addr;
2436 int err;
2437
2438 /* Make sure the address is valid */
2439 err = i2c_check_7bit_addr_validity_strict(addr);
2440 if (err) {
2441 dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n",
2442 addr);
2443 return err;
2444 }
2445
2446 /* Skip if already in use (7 bit, no need to encode flags) */
2447 if (i2c_check_addr_busy(adapter, addr))
2448 return 0;
2449
2450 /* Make sure there is something at this address */
2451 if (!i2c_default_probe(adapter, addr))
2452 return 0;
2453
2454 /* Finally call the custom detection function */
2455 memset(&info, 0, sizeof(struct i2c_board_info));
2456 info.addr = addr;
2457 err = driver->detect(temp_client, &info);
2458 if (err) {
2459 /* -ENODEV is returned if the detection fails. We catch it
2460 here as this isn't an error. */
2461 return err == -ENODEV ? 0 : err;
2462 }
2463
2464 /* Consistency check */
2465 if (info.type[0] == '\0') {
2466 dev_err(&adapter->dev,
2467 "%s detection function provided no name for 0x%x\n",
2468 driver->driver.name, addr);
2469 } else {
2470 struct i2c_client *client;
2471
2472 /* Detection succeeded, instantiate the device */
2473 if (adapter->class & I2C_CLASS_DEPRECATED)
2474 dev_warn(&adapter->dev,
2475 "This adapter will soon drop class based instantiation of devices. "
2476 "Please make sure client 0x%02x gets instantiated by other means. "
2477 "Check 'Documentation/i2c/instantiating-devices.rst' for details.\n",
2478 info.addr);
2479
2480 dev_dbg(&adapter->dev, "Creating %s at 0x%02x\n",
2481 info.type, info.addr);
2482 client = i2c_new_client_device(adapter, &info);
2483 if (!IS_ERR(client))
2484 list_add_tail(&client->detected, &driver->clients);
2485 else
2486 dev_err(&adapter->dev, "Failed creating %s at 0x%02x\n",
2487 info.type, info.addr);
2488 }
2489 return 0;
2490}
2491
2492static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
2493{
2494 const unsigned short *address_list;
2495 struct i2c_client *temp_client;
2496 int i, err = 0;
2497
2498 address_list = driver->address_list;
2499 if (!driver->detect || !address_list)
2500 return 0;
2501
2502 /* Warn that the adapter lost class based instantiation */
2503 if (adapter->class == I2C_CLASS_DEPRECATED) {
2504 dev_dbg(&adapter->dev,
2505 "This adapter dropped support for I2C classes and won't auto-detect %s devices anymore. "
2506 "If you need it, check 'Documentation/i2c/instantiating-devices.rst' for alternatives.\n",
2507 driver->driver.name);
2508 return 0;
2509 }
2510
2511 /* Stop here if the classes do not match */
2512 if (!(adapter->class & driver->class))
2513 return 0;
2514
2515 /* Set up a temporary client to help detect callback */
2516 temp_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
2517 if (!temp_client)
2518 return -ENOMEM;
2519 temp_client->adapter = adapter;
2520
2521 for (i = 0; address_list[i] != I2C_CLIENT_END; i += 1) {
2522 dev_dbg(&adapter->dev,
2523 "found normal entry for adapter %d, addr 0x%02x\n",
2524 i2c_adapter_id(adapter), address_list[i]);
2525 temp_client->addr = address_list[i];
2526 err = i2c_detect_address(temp_client, driver);
2527 if (unlikely(err))
2528 break;
2529 }
2530
2531 kfree(temp_client);
2532 return err;
2533}
2534
2535int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr)
2536{
2537 return i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
2538 I2C_SMBUS_QUICK, NULL) >= 0;
2539}
2540EXPORT_SYMBOL_GPL(i2c_probe_func_quick_read);
2541
2542struct i2c_client *
2543i2c_new_scanned_device(struct i2c_adapter *adap,
2544 struct i2c_board_info *info,
2545 unsigned short const *addr_list,
2546 int (*probe)(struct i2c_adapter *adap, unsigned short addr))
2547{
2548 int i;
2549
2550 if (!probe)
2551 probe = i2c_default_probe;
2552
2553 for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
2554 /* Check address validity */
2555 if (i2c_check_7bit_addr_validity_strict(addr_list[i]) < 0) {
2556 dev_warn(&adap->dev, "Invalid 7-bit address 0x%02x\n",
2557 addr_list[i]);
2558 continue;
2559 }
2560
2561 /* Check address availability (7 bit, no need to encode flags) */
2562 if (i2c_check_addr_busy(adap, addr_list[i])) {
2563 dev_dbg(&adap->dev,
2564 "Address 0x%02x already in use, not probing\n",
2565 addr_list[i]);
2566 continue;
2567 }
2568
2569 /* Test address responsiveness */
2570 if (probe(adap, addr_list[i]))
2571 break;
2572 }
2573
2574 if (addr_list[i] == I2C_CLIENT_END) {
2575 dev_dbg(&adap->dev, "Probing failed, no device found\n");
2576 return ERR_PTR(-ENODEV);
2577 }
2578
2579 info->addr = addr_list[i];
2580 return i2c_new_client_device(adap, info);
2581}
2582EXPORT_SYMBOL_GPL(i2c_new_scanned_device);
2583
2584struct i2c_adapter *i2c_get_adapter(int nr)
2585{
2586 struct i2c_adapter *adapter;
2587
2588 mutex_lock(&core_lock);
2589 adapter = idr_find(&i2c_adapter_idr, nr);
2590 if (!adapter)
2591 goto exit;
2592
2593 if (try_module_get(adapter->owner))
2594 get_device(&adapter->dev);
2595 else
2596 adapter = NULL;
2597
2598 exit:
2599 mutex_unlock(&core_lock);
2600 return adapter;
2601}
2602EXPORT_SYMBOL(i2c_get_adapter);
2603
2604void i2c_put_adapter(struct i2c_adapter *adap)
2605{
2606 if (!adap)
2607 return;
2608
2609 module_put(adap->owner);
2610 /* Should be last, otherwise we risk use-after-free with 'adap' */
2611 put_device(&adap->dev);
2612}
2613EXPORT_SYMBOL(i2c_put_adapter);
2614
2615/**
2616 * i2c_get_dma_safe_msg_buf() - get a DMA safe buffer for the given i2c_msg
2617 * @msg: the message to be checked
2618 * @threshold: the minimum number of bytes for which using DMA makes sense.
2619 * Should at least be 1.
2620 *
2621 * Return: NULL if a DMA safe buffer was not obtained. Use msg->buf with PIO.
2622 * Or a valid pointer to be used with DMA. After use, release it by
2623 * calling i2c_put_dma_safe_msg_buf().
2624 *
2625 * This function must only be called from process context!
2626 */
2627u8 *i2c_get_dma_safe_msg_buf(struct i2c_msg *msg, unsigned int threshold)
2628{
2629 /* also skip 0-length msgs for bogus thresholds of 0 */
2630 if (!threshold)
2631 pr_debug("DMA buffer for addr=0x%02x with length 0 is bogus\n",
2632 msg->addr);
2633 if (msg->len < threshold || msg->len == 0)
2634 return NULL;
2635
2636 if (msg->flags & I2C_M_DMA_SAFE)
2637 return msg->buf;
2638
2639 pr_debug("using bounce buffer for addr=0x%02x, len=%d\n",
2640 msg->addr, msg->len);
2641
2642 if (msg->flags & I2C_M_RD)
2643 return kzalloc(msg->len, GFP_KERNEL);
2644 else
2645 return kmemdup(msg->buf, msg->len, GFP_KERNEL);
2646}
2647EXPORT_SYMBOL_GPL(i2c_get_dma_safe_msg_buf);
2648
2649/**
2650 * i2c_put_dma_safe_msg_buf - release DMA safe buffer and sync with i2c_msg
2651 * @buf: the buffer obtained from i2c_get_dma_safe_msg_buf(). May be NULL.
2652 * @msg: the message which the buffer corresponds to
2653 * @xferred: bool saying if the message was transferred
2654 */
2655void i2c_put_dma_safe_msg_buf(u8 *buf, struct i2c_msg *msg, bool xferred)
2656{
2657 if (!buf || buf == msg->buf)
2658 return;
2659
2660 if (xferred && msg->flags & I2C_M_RD)
2661 memcpy(msg->buf, buf, msg->len);
2662
2663 kfree(buf);
2664}
2665EXPORT_SYMBOL_GPL(i2c_put_dma_safe_msg_buf);
2666
2667MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
2668MODULE_DESCRIPTION("I2C-Bus main module");
2669MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Linux I2C core
4 *
5 * Copyright (C) 1995-99 Simon G. Vogl
6 * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>
7 * Mux support by Rodolfo Giometti <giometti@enneenne.com> and
8 * Michael Lawnick <michael.lawnick.ext@nsn.com>
9 *
10 * Copyright (C) 2013-2017 Wolfram Sang <wsa@kernel.org>
11 */
12
13#define pr_fmt(fmt) "i2c-core: " fmt
14
15#include <dt-bindings/i2c/i2c.h>
16#include <linux/acpi.h>
17#include <linux/clk/clk-conf.h>
18#include <linux/completion.h>
19#include <linux/delay.h>
20#include <linux/err.h>
21#include <linux/errno.h>
22#include <linux/gpio/consumer.h>
23#include <linux/i2c.h>
24#include <linux/i2c-smbus.h>
25#include <linux/idr.h>
26#include <linux/init.h>
27#include <linux/interrupt.h>
28#include <linux/irqflags.h>
29#include <linux/jump_label.h>
30#include <linux/kernel.h>
31#include <linux/module.h>
32#include <linux/mutex.h>
33#include <linux/of_device.h>
34#include <linux/of.h>
35#include <linux/of_irq.h>
36#include <linux/pinctrl/consumer.h>
37#include <linux/pm_domain.h>
38#include <linux/pm_runtime.h>
39#include <linux/pm_wakeirq.h>
40#include <linux/property.h>
41#include <linux/rwsem.h>
42#include <linux/slab.h>
43
44#include "i2c-core.h"
45
46#define CREATE_TRACE_POINTS
47#include <trace/events/i2c.h>
48
49#define I2C_ADDR_OFFSET_TEN_BIT 0xa000
50#define I2C_ADDR_OFFSET_SLAVE 0x1000
51
52#define I2C_ADDR_7BITS_MAX 0x77
53#define I2C_ADDR_7BITS_COUNT (I2C_ADDR_7BITS_MAX + 1)
54
55#define I2C_ADDR_DEVICE_ID 0x7c
56
57/*
58 * core_lock protects i2c_adapter_idr, and guarantees that device detection,
59 * deletion of detected devices are serialized
60 */
61static DEFINE_MUTEX(core_lock);
62static DEFINE_IDR(i2c_adapter_idr);
63
64static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
65
66static DEFINE_STATIC_KEY_FALSE(i2c_trace_msg_key);
67static bool is_registered;
68
69int i2c_transfer_trace_reg(void)
70{
71 static_branch_inc(&i2c_trace_msg_key);
72 return 0;
73}
74
75void i2c_transfer_trace_unreg(void)
76{
77 static_branch_dec(&i2c_trace_msg_key);
78}
79
80const char *i2c_freq_mode_string(u32 bus_freq_hz)
81{
82 switch (bus_freq_hz) {
83 case I2C_MAX_STANDARD_MODE_FREQ:
84 return "Standard Mode (100 kHz)";
85 case I2C_MAX_FAST_MODE_FREQ:
86 return "Fast Mode (400 kHz)";
87 case I2C_MAX_FAST_MODE_PLUS_FREQ:
88 return "Fast Mode Plus (1.0 MHz)";
89 case I2C_MAX_TURBO_MODE_FREQ:
90 return "Turbo Mode (1.4 MHz)";
91 case I2C_MAX_HIGH_SPEED_MODE_FREQ:
92 return "High Speed Mode (3.4 MHz)";
93 case I2C_MAX_ULTRA_FAST_MODE_FREQ:
94 return "Ultra Fast Mode (5.0 MHz)";
95 default:
96 return "Unknown Mode";
97 }
98}
99EXPORT_SYMBOL_GPL(i2c_freq_mode_string);
100
101const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
102 const struct i2c_client *client)
103{
104 if (!(id && client))
105 return NULL;
106
107 while (id->name[0]) {
108 if (strcmp(client->name, id->name) == 0)
109 return id;
110 id++;
111 }
112 return NULL;
113}
114EXPORT_SYMBOL_GPL(i2c_match_id);
115
116static int i2c_device_match(struct device *dev, struct device_driver *drv)
117{
118 struct i2c_client *client = i2c_verify_client(dev);
119 struct i2c_driver *driver;
120
121
122 /* Attempt an OF style match */
123 if (i2c_of_match_device(drv->of_match_table, client))
124 return 1;
125
126 /* Then ACPI style match */
127 if (acpi_driver_match_device(dev, drv))
128 return 1;
129
130 driver = to_i2c_driver(drv);
131
132 /* Finally an I2C match */
133 if (i2c_match_id(driver->id_table, client))
134 return 1;
135
136 return 0;
137}
138
139static int i2c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
140{
141 struct i2c_client *client = to_i2c_client(dev);
142 int rc;
143
144 rc = of_device_uevent_modalias(dev, env);
145 if (rc != -ENODEV)
146 return rc;
147
148 rc = acpi_device_uevent_modalias(dev, env);
149 if (rc != -ENODEV)
150 return rc;
151
152 return add_uevent_var(env, "MODALIAS=%s%s", I2C_MODULE_PREFIX, client->name);
153}
154
155/* i2c bus recovery routines */
156static int get_scl_gpio_value(struct i2c_adapter *adap)
157{
158 return gpiod_get_value_cansleep(adap->bus_recovery_info->scl_gpiod);
159}
160
161static void set_scl_gpio_value(struct i2c_adapter *adap, int val)
162{
163 gpiod_set_value_cansleep(adap->bus_recovery_info->scl_gpiod, val);
164}
165
166static int get_sda_gpio_value(struct i2c_adapter *adap)
167{
168 return gpiod_get_value_cansleep(adap->bus_recovery_info->sda_gpiod);
169}
170
171static void set_sda_gpio_value(struct i2c_adapter *adap, int val)
172{
173 gpiod_set_value_cansleep(adap->bus_recovery_info->sda_gpiod, val);
174}
175
176static int i2c_generic_bus_free(struct i2c_adapter *adap)
177{
178 struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
179 int ret = -EOPNOTSUPP;
180
181 if (bri->get_bus_free)
182 ret = bri->get_bus_free(adap);
183 else if (bri->get_sda)
184 ret = bri->get_sda(adap);
185
186 if (ret < 0)
187 return ret;
188
189 return ret ? 0 : -EBUSY;
190}
191
192/*
193 * We are generating clock pulses. ndelay() determines durating of clk pulses.
194 * We will generate clock with rate 100 KHz and so duration of both clock levels
195 * is: delay in ns = (10^6 / 100) / 2
196 */
197#define RECOVERY_NDELAY 5000
198#define RECOVERY_CLK_CNT 9
199
200int i2c_generic_scl_recovery(struct i2c_adapter *adap)
201{
202 struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
203 int i = 0, scl = 1, ret = 0;
204
205 if (bri->prepare_recovery)
206 bri->prepare_recovery(adap);
207 if (bri->pinctrl)
208 pinctrl_select_state(bri->pinctrl, bri->pins_gpio);
209
210 /*
211 * If we can set SDA, we will always create a STOP to ensure additional
212 * pulses will do no harm. This is achieved by letting SDA follow SCL
213 * half a cycle later. Check the 'incomplete_write_byte' fault injector
214 * for details. Note that we must honour tsu:sto, 4us, but lets use 5us
215 * here for simplicity.
216 */
217 bri->set_scl(adap, scl);
218 ndelay(RECOVERY_NDELAY);
219 if (bri->set_sda)
220 bri->set_sda(adap, scl);
221 ndelay(RECOVERY_NDELAY / 2);
222
223 /*
224 * By this time SCL is high, as we need to give 9 falling-rising edges
225 */
226 while (i++ < RECOVERY_CLK_CNT * 2) {
227 if (scl) {
228 /* SCL shouldn't be low here */
229 if (!bri->get_scl(adap)) {
230 dev_err(&adap->dev,
231 "SCL is stuck low, exit recovery\n");
232 ret = -EBUSY;
233 break;
234 }
235 }
236
237 scl = !scl;
238 bri->set_scl(adap, scl);
239 /* Creating STOP again, see above */
240 if (scl) {
241 /* Honour minimum tsu:sto */
242 ndelay(RECOVERY_NDELAY);
243 } else {
244 /* Honour minimum tf and thd:dat */
245 ndelay(RECOVERY_NDELAY / 2);
246 }
247 if (bri->set_sda)
248 bri->set_sda(adap, scl);
249 ndelay(RECOVERY_NDELAY / 2);
250
251 if (scl) {
252 ret = i2c_generic_bus_free(adap);
253 if (ret == 0)
254 break;
255 }
256 }
257
258 /* If we can't check bus status, assume recovery worked */
259 if (ret == -EOPNOTSUPP)
260 ret = 0;
261
262 if (bri->unprepare_recovery)
263 bri->unprepare_recovery(adap);
264 if (bri->pinctrl)
265 pinctrl_select_state(bri->pinctrl, bri->pins_default);
266
267 return ret;
268}
269EXPORT_SYMBOL_GPL(i2c_generic_scl_recovery);
270
271int i2c_recover_bus(struct i2c_adapter *adap)
272{
273 if (!adap->bus_recovery_info)
274 return -EBUSY;
275
276 dev_dbg(&adap->dev, "Trying i2c bus recovery\n");
277 return adap->bus_recovery_info->recover_bus(adap);
278}
279EXPORT_SYMBOL_GPL(i2c_recover_bus);
280
281static void i2c_gpio_init_pinctrl_recovery(struct i2c_adapter *adap)
282{
283 struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
284 struct device *dev = &adap->dev;
285 struct pinctrl *p = bri->pinctrl;
286
287 /*
288 * we can't change states without pinctrl, so remove the states if
289 * populated
290 */
291 if (!p) {
292 bri->pins_default = NULL;
293 bri->pins_gpio = NULL;
294 return;
295 }
296
297 if (!bri->pins_default) {
298 bri->pins_default = pinctrl_lookup_state(p,
299 PINCTRL_STATE_DEFAULT);
300 if (IS_ERR(bri->pins_default)) {
301 dev_dbg(dev, PINCTRL_STATE_DEFAULT " state not found for GPIO recovery\n");
302 bri->pins_default = NULL;
303 }
304 }
305 if (!bri->pins_gpio) {
306 bri->pins_gpio = pinctrl_lookup_state(p, "gpio");
307 if (IS_ERR(bri->pins_gpio))
308 bri->pins_gpio = pinctrl_lookup_state(p, "recovery");
309
310 if (IS_ERR(bri->pins_gpio)) {
311 dev_dbg(dev, "no gpio or recovery state found for GPIO recovery\n");
312 bri->pins_gpio = NULL;
313 }
314 }
315
316 /* for pinctrl state changes, we need all the information */
317 if (bri->pins_default && bri->pins_gpio) {
318 dev_info(dev, "using pinctrl states for GPIO recovery");
319 } else {
320 bri->pinctrl = NULL;
321 bri->pins_default = NULL;
322 bri->pins_gpio = NULL;
323 }
324}
325
326static int i2c_gpio_init_generic_recovery(struct i2c_adapter *adap)
327{
328 struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
329 struct device *dev = &adap->dev;
330 struct gpio_desc *gpiod;
331 int ret = 0;
332
333 /*
334 * don't touch the recovery information if the driver is not using
335 * generic SCL recovery
336 */
337 if (bri->recover_bus && bri->recover_bus != i2c_generic_scl_recovery)
338 return 0;
339
340 /*
341 * pins might be taken as GPIO, so we should inform pinctrl about
342 * this and move the state to GPIO
343 */
344 if (bri->pinctrl)
345 pinctrl_select_state(bri->pinctrl, bri->pins_gpio);
346
347 /*
348 * if there is incomplete or no recovery information, see if generic
349 * GPIO recovery is available
350 */
351 if (!bri->scl_gpiod) {
352 gpiod = devm_gpiod_get(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
353 if (PTR_ERR(gpiod) == -EPROBE_DEFER) {
354 ret = -EPROBE_DEFER;
355 goto cleanup_pinctrl_state;
356 }
357 if (!IS_ERR(gpiod)) {
358 bri->scl_gpiod = gpiod;
359 bri->recover_bus = i2c_generic_scl_recovery;
360 dev_info(dev, "using generic GPIOs for recovery\n");
361 }
362 }
363
364 /* SDA GPIOD line is optional, so we care about DEFER only */
365 if (!bri->sda_gpiod) {
366 /*
367 * We have SCL. Pull SCL low and wait a bit so that SDA glitches
368 * have no effect.
369 */
370 gpiod_direction_output(bri->scl_gpiod, 0);
371 udelay(10);
372 gpiod = devm_gpiod_get(dev, "sda", GPIOD_IN);
373
374 /* Wait a bit in case of a SDA glitch, and then release SCL. */
375 udelay(10);
376 gpiod_direction_output(bri->scl_gpiod, 1);
377
378 if (PTR_ERR(gpiod) == -EPROBE_DEFER) {
379 ret = -EPROBE_DEFER;
380 goto cleanup_pinctrl_state;
381 }
382 if (!IS_ERR(gpiod))
383 bri->sda_gpiod = gpiod;
384 }
385
386cleanup_pinctrl_state:
387 /* change the state of the pins back to their default state */
388 if (bri->pinctrl)
389 pinctrl_select_state(bri->pinctrl, bri->pins_default);
390
391 return ret;
392}
393
394static int i2c_gpio_init_recovery(struct i2c_adapter *adap)
395{
396 i2c_gpio_init_pinctrl_recovery(adap);
397 return i2c_gpio_init_generic_recovery(adap);
398}
399
400static int i2c_init_recovery(struct i2c_adapter *adap)
401{
402 struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
403 bool is_error_level = true;
404 char *err_str;
405
406 if (!bri)
407 return 0;
408
409 if (i2c_gpio_init_recovery(adap) == -EPROBE_DEFER)
410 return -EPROBE_DEFER;
411
412 if (!bri->recover_bus) {
413 err_str = "no suitable method provided";
414 is_error_level = false;
415 goto err;
416 }
417
418 if (bri->scl_gpiod && bri->recover_bus == i2c_generic_scl_recovery) {
419 bri->get_scl = get_scl_gpio_value;
420 bri->set_scl = set_scl_gpio_value;
421 if (bri->sda_gpiod) {
422 bri->get_sda = get_sda_gpio_value;
423 /* FIXME: add proper flag instead of '0' once available */
424 if (gpiod_get_direction(bri->sda_gpiod) == 0)
425 bri->set_sda = set_sda_gpio_value;
426 }
427 } else if (bri->recover_bus == i2c_generic_scl_recovery) {
428 /* Generic SCL recovery */
429 if (!bri->set_scl || !bri->get_scl) {
430 err_str = "no {get|set}_scl() found";
431 goto err;
432 }
433 if (!bri->set_sda && !bri->get_sda) {
434 err_str = "either get_sda() or set_sda() needed";
435 goto err;
436 }
437 }
438
439 return 0;
440 err:
441 if (is_error_level)
442 dev_err(&adap->dev, "Not using recovery: %s\n", err_str);
443 else
444 dev_dbg(&adap->dev, "Not using recovery: %s\n", err_str);
445 adap->bus_recovery_info = NULL;
446
447 return -EINVAL;
448}
449
450static int i2c_smbus_host_notify_to_irq(const struct i2c_client *client)
451{
452 struct i2c_adapter *adap = client->adapter;
453 unsigned int irq;
454
455 if (!adap->host_notify_domain)
456 return -ENXIO;
457
458 if (client->flags & I2C_CLIENT_TEN)
459 return -EINVAL;
460
461 irq = irq_create_mapping(adap->host_notify_domain, client->addr);
462
463 return irq > 0 ? irq : -ENXIO;
464}
465
466static int i2c_device_probe(struct device *dev)
467{
468 struct i2c_client *client = i2c_verify_client(dev);
469 struct i2c_adapter *adap;
470 struct i2c_driver *driver;
471 int status;
472
473 if (!client)
474 return 0;
475
476 adap = client->adapter;
477 client->irq = client->init_irq;
478
479 if (!client->irq) {
480 int irq = -ENOENT;
481
482 if (client->flags & I2C_CLIENT_HOST_NOTIFY) {
483 dev_dbg(dev, "Using Host Notify IRQ\n");
484 /* Keep adapter active when Host Notify is required */
485 pm_runtime_get_sync(&client->adapter->dev);
486 irq = i2c_smbus_host_notify_to_irq(client);
487 } else if (dev->of_node) {
488 irq = of_irq_get_byname(dev->of_node, "irq");
489 if (irq == -EINVAL || irq == -ENODATA)
490 irq = of_irq_get(dev->of_node, 0);
491 } else if (ACPI_COMPANION(dev)) {
492 irq = i2c_acpi_get_irq(client);
493 }
494 if (irq == -EPROBE_DEFER) {
495 status = irq;
496 goto put_sync_adapter;
497 }
498
499 if (irq < 0)
500 irq = 0;
501
502 client->irq = irq;
503 }
504
505 driver = to_i2c_driver(dev->driver);
506
507 /*
508 * An I2C ID table is not mandatory, if and only if, a suitable OF
509 * or ACPI ID table is supplied for the probing device.
510 */
511 if (!driver->id_table &&
512 !acpi_driver_match_device(dev, dev->driver) &&
513 !i2c_of_match_device(dev->driver->of_match_table, client)) {
514 status = -ENODEV;
515 goto put_sync_adapter;
516 }
517
518 if (client->flags & I2C_CLIENT_WAKE) {
519 int wakeirq;
520
521 wakeirq = of_irq_get_byname(dev->of_node, "wakeup");
522 if (wakeirq == -EPROBE_DEFER) {
523 status = wakeirq;
524 goto put_sync_adapter;
525 }
526
527 device_init_wakeup(&client->dev, true);
528
529 if (wakeirq > 0 && wakeirq != client->irq)
530 status = dev_pm_set_dedicated_wake_irq(dev, wakeirq);
531 else if (client->irq > 0)
532 status = dev_pm_set_wake_irq(dev, client->irq);
533 else
534 status = 0;
535
536 if (status)
537 dev_warn(&client->dev, "failed to set up wakeup irq\n");
538 }
539
540 dev_dbg(dev, "probe\n");
541
542 if (adap->bus_regulator) {
543 status = regulator_enable(adap->bus_regulator);
544 if (status < 0) {
545 dev_err(&adap->dev, "Failed to enable bus regulator\n");
546 goto err_clear_wakeup_irq;
547 }
548 }
549
550 status = of_clk_set_defaults(dev->of_node, false);
551 if (status < 0)
552 goto err_clear_wakeup_irq;
553
554 status = dev_pm_domain_attach(&client->dev, true);
555 if (status)
556 goto err_clear_wakeup_irq;
557
558 client->devres_group_id = devres_open_group(&client->dev, NULL,
559 GFP_KERNEL);
560 if (!client->devres_group_id) {
561 status = -ENOMEM;
562 goto err_detach_pm_domain;
563 }
564
565 /*
566 * When there are no more users of probe(),
567 * rename probe_new to probe.
568 */
569 if (driver->probe_new)
570 status = driver->probe_new(client);
571 else if (driver->probe)
572 status = driver->probe(client,
573 i2c_match_id(driver->id_table, client));
574 else
575 status = -EINVAL;
576
577 /*
578 * Note that we are not closing the devres group opened above so
579 * even resources that were attached to the device after probe is
580 * run are released when i2c_device_remove() is executed. This is
581 * needed as some drivers would allocate additional resources,
582 * for example when updating firmware.
583 */
584
585 if (status)
586 goto err_release_driver_resources;
587
588 return 0;
589
590err_release_driver_resources:
591 devres_release_group(&client->dev, client->devres_group_id);
592err_detach_pm_domain:
593 dev_pm_domain_detach(&client->dev, true);
594err_clear_wakeup_irq:
595 dev_pm_clear_wake_irq(&client->dev);
596 device_init_wakeup(&client->dev, false);
597put_sync_adapter:
598 if (client->flags & I2C_CLIENT_HOST_NOTIFY)
599 pm_runtime_put_sync(&client->adapter->dev);
600
601 return status;
602}
603
604static int i2c_device_remove(struct device *dev)
605{
606 struct i2c_client *client = to_i2c_client(dev);
607 struct i2c_adapter *adap;
608 struct i2c_driver *driver;
609
610 adap = client->adapter;
611 driver = to_i2c_driver(dev->driver);
612 if (driver->remove) {
613 int status;
614
615 dev_dbg(dev, "remove\n");
616
617 status = driver->remove(client);
618 if (status)
619 dev_warn(dev, "remove failed (%pe), will be ignored\n", ERR_PTR(status));
620 }
621
622 devres_release_group(&client->dev, client->devres_group_id);
623
624 dev_pm_domain_detach(&client->dev, true);
625 if (!pm_runtime_status_suspended(&client->dev) && adap->bus_regulator)
626 regulator_disable(adap->bus_regulator);
627
628 dev_pm_clear_wake_irq(&client->dev);
629 device_init_wakeup(&client->dev, false);
630
631 client->irq = 0;
632 if (client->flags & I2C_CLIENT_HOST_NOTIFY)
633 pm_runtime_put(&client->adapter->dev);
634
635 /* return always 0 because there is WIP to make remove-functions void */
636 return 0;
637}
638
639#ifdef CONFIG_PM_SLEEP
640static int i2c_resume_early(struct device *dev)
641{
642 struct i2c_client *client = i2c_verify_client(dev);
643 int err;
644
645 if (!client)
646 return 0;
647
648 if (pm_runtime_status_suspended(&client->dev) &&
649 client->adapter->bus_regulator) {
650 err = regulator_enable(client->adapter->bus_regulator);
651 if (err)
652 return err;
653 }
654
655 return pm_generic_resume_early(&client->dev);
656}
657
658static int i2c_suspend_late(struct device *dev)
659{
660 struct i2c_client *client = i2c_verify_client(dev);
661 int err;
662
663 if (!client)
664 return 0;
665
666 err = pm_generic_suspend_late(&client->dev);
667 if (err)
668 return err;
669
670 if (!pm_runtime_status_suspended(&client->dev) &&
671 client->adapter->bus_regulator)
672 return regulator_disable(client->adapter->bus_regulator);
673
674 return 0;
675}
676#endif
677
678#ifdef CONFIG_PM
679static int i2c_runtime_resume(struct device *dev)
680{
681 struct i2c_client *client = i2c_verify_client(dev);
682 int err;
683
684 if (!client)
685 return 0;
686
687 if (client->adapter->bus_regulator) {
688 err = regulator_enable(client->adapter->bus_regulator);
689 if (err)
690 return err;
691 }
692
693 return pm_generic_runtime_resume(&client->dev);
694}
695
696static int i2c_runtime_suspend(struct device *dev)
697{
698 struct i2c_client *client = i2c_verify_client(dev);
699 int err;
700
701 if (!client)
702 return 0;
703
704 err = pm_generic_runtime_suspend(&client->dev);
705 if (err)
706 return err;
707
708 if (client->adapter->bus_regulator)
709 return regulator_disable(client->adapter->bus_regulator);
710 return 0;
711}
712#endif
713
714static const struct dev_pm_ops i2c_device_pm = {
715 SET_LATE_SYSTEM_SLEEP_PM_OPS(i2c_suspend_late, i2c_resume_early)
716 SET_RUNTIME_PM_OPS(i2c_runtime_suspend, i2c_runtime_resume, NULL)
717};
718
719static void i2c_device_shutdown(struct device *dev)
720{
721 struct i2c_client *client = i2c_verify_client(dev);
722 struct i2c_driver *driver;
723
724 if (!client || !dev->driver)
725 return;
726 driver = to_i2c_driver(dev->driver);
727 if (driver->shutdown)
728 driver->shutdown(client);
729 else if (client->irq > 0)
730 disable_irq(client->irq);
731}
732
733static void i2c_client_dev_release(struct device *dev)
734{
735 kfree(to_i2c_client(dev));
736}
737
738static ssize_t
739name_show(struct device *dev, struct device_attribute *attr, char *buf)
740{
741 return sprintf(buf, "%s\n", dev->type == &i2c_client_type ?
742 to_i2c_client(dev)->name : to_i2c_adapter(dev)->name);
743}
744static DEVICE_ATTR_RO(name);
745
746static ssize_t
747modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
748{
749 struct i2c_client *client = to_i2c_client(dev);
750 int len;
751
752 len = of_device_modalias(dev, buf, PAGE_SIZE);
753 if (len != -ENODEV)
754 return len;
755
756 len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
757 if (len != -ENODEV)
758 return len;
759
760 return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
761}
762static DEVICE_ATTR_RO(modalias);
763
764static struct attribute *i2c_dev_attrs[] = {
765 &dev_attr_name.attr,
766 /* modalias helps coldplug: modprobe $(cat .../modalias) */
767 &dev_attr_modalias.attr,
768 NULL
769};
770ATTRIBUTE_GROUPS(i2c_dev);
771
772struct bus_type i2c_bus_type = {
773 .name = "i2c",
774 .match = i2c_device_match,
775 .probe = i2c_device_probe,
776 .remove = i2c_device_remove,
777 .shutdown = i2c_device_shutdown,
778 .pm = &i2c_device_pm,
779};
780EXPORT_SYMBOL_GPL(i2c_bus_type);
781
782struct device_type i2c_client_type = {
783 .groups = i2c_dev_groups,
784 .uevent = i2c_device_uevent,
785 .release = i2c_client_dev_release,
786};
787EXPORT_SYMBOL_GPL(i2c_client_type);
788
789
790/**
791 * i2c_verify_client - return parameter as i2c_client, or NULL
792 * @dev: device, probably from some driver model iterator
793 *
794 * When traversing the driver model tree, perhaps using driver model
795 * iterators like @device_for_each_child(), you can't assume very much
796 * about the nodes you find. Use this function to avoid oopses caused
797 * by wrongly treating some non-I2C device as an i2c_client.
798 */
799struct i2c_client *i2c_verify_client(struct device *dev)
800{
801 return (dev->type == &i2c_client_type)
802 ? to_i2c_client(dev)
803 : NULL;
804}
805EXPORT_SYMBOL(i2c_verify_client);
806
807
808/* Return a unique address which takes the flags of the client into account */
809static unsigned short i2c_encode_flags_to_addr(struct i2c_client *client)
810{
811 unsigned short addr = client->addr;
812
813 /* For some client flags, add an arbitrary offset to avoid collisions */
814 if (client->flags & I2C_CLIENT_TEN)
815 addr |= I2C_ADDR_OFFSET_TEN_BIT;
816
817 if (client->flags & I2C_CLIENT_SLAVE)
818 addr |= I2C_ADDR_OFFSET_SLAVE;
819
820 return addr;
821}
822
823/* This is a permissive address validity check, I2C address map constraints
824 * are purposely not enforced, except for the general call address. */
825static int i2c_check_addr_validity(unsigned int addr, unsigned short flags)
826{
827 if (flags & I2C_CLIENT_TEN) {
828 /* 10-bit address, all values are valid */
829 if (addr > 0x3ff)
830 return -EINVAL;
831 } else {
832 /* 7-bit address, reject the general call address */
833 if (addr == 0x00 || addr > 0x7f)
834 return -EINVAL;
835 }
836 return 0;
837}
838
839/* And this is a strict address validity check, used when probing. If a
840 * device uses a reserved address, then it shouldn't be probed. 7-bit
841 * addressing is assumed, 10-bit address devices are rare and should be
842 * explicitly enumerated. */
843int i2c_check_7bit_addr_validity_strict(unsigned short addr)
844{
845 /*
846 * Reserved addresses per I2C specification:
847 * 0x00 General call address / START byte
848 * 0x01 CBUS address
849 * 0x02 Reserved for different bus format
850 * 0x03 Reserved for future purposes
851 * 0x04-0x07 Hs-mode master code
852 * 0x78-0x7b 10-bit slave addressing
853 * 0x7c-0x7f Reserved for future purposes
854 */
855 if (addr < 0x08 || addr > 0x77)
856 return -EINVAL;
857 return 0;
858}
859
860static int __i2c_check_addr_busy(struct device *dev, void *addrp)
861{
862 struct i2c_client *client = i2c_verify_client(dev);
863 int addr = *(int *)addrp;
864
865 if (client && i2c_encode_flags_to_addr(client) == addr)
866 return -EBUSY;
867 return 0;
868}
869
870/* walk up mux tree */
871static int i2c_check_mux_parents(struct i2c_adapter *adapter, int addr)
872{
873 struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
874 int result;
875
876 result = device_for_each_child(&adapter->dev, &addr,
877 __i2c_check_addr_busy);
878
879 if (!result && parent)
880 result = i2c_check_mux_parents(parent, addr);
881
882 return result;
883}
884
885/* recurse down mux tree */
886static int i2c_check_mux_children(struct device *dev, void *addrp)
887{
888 int result;
889
890 if (dev->type == &i2c_adapter_type)
891 result = device_for_each_child(dev, addrp,
892 i2c_check_mux_children);
893 else
894 result = __i2c_check_addr_busy(dev, addrp);
895
896 return result;
897}
898
899static int i2c_check_addr_busy(struct i2c_adapter *adapter, int addr)
900{
901 struct i2c_adapter *parent = i2c_parent_is_i2c_adapter(adapter);
902 int result = 0;
903
904 if (parent)
905 result = i2c_check_mux_parents(parent, addr);
906
907 if (!result)
908 result = device_for_each_child(&adapter->dev, &addr,
909 i2c_check_mux_children);
910
911 return result;
912}
913
914/**
915 * i2c_adapter_lock_bus - Get exclusive access to an I2C bus segment
916 * @adapter: Target I2C bus segment
917 * @flags: I2C_LOCK_ROOT_ADAPTER locks the root i2c adapter, I2C_LOCK_SEGMENT
918 * locks only this branch in the adapter tree
919 */
920static void i2c_adapter_lock_bus(struct i2c_adapter *adapter,
921 unsigned int flags)
922{
923 rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));
924}
925
926/**
927 * i2c_adapter_trylock_bus - Try to get exclusive access to an I2C bus segment
928 * @adapter: Target I2C bus segment
929 * @flags: I2C_LOCK_ROOT_ADAPTER trylocks the root i2c adapter, I2C_LOCK_SEGMENT
930 * trylocks only this branch in the adapter tree
931 */
932static int i2c_adapter_trylock_bus(struct i2c_adapter *adapter,
933 unsigned int flags)
934{
935 return rt_mutex_trylock(&adapter->bus_lock);
936}
937
938/**
939 * i2c_adapter_unlock_bus - Release exclusive access to an I2C bus segment
940 * @adapter: Target I2C bus segment
941 * @flags: I2C_LOCK_ROOT_ADAPTER unlocks the root i2c adapter, I2C_LOCK_SEGMENT
942 * unlocks only this branch in the adapter tree
943 */
944static void i2c_adapter_unlock_bus(struct i2c_adapter *adapter,
945 unsigned int flags)
946{
947 rt_mutex_unlock(&adapter->bus_lock);
948}
949
950static void i2c_dev_set_name(struct i2c_adapter *adap,
951 struct i2c_client *client,
952 struct i2c_board_info const *info)
953{
954 struct acpi_device *adev = ACPI_COMPANION(&client->dev);
955
956 if (info && info->dev_name) {
957 dev_set_name(&client->dev, "i2c-%s", info->dev_name);
958 return;
959 }
960
961 if (adev) {
962 dev_set_name(&client->dev, "i2c-%s", acpi_dev_name(adev));
963 return;
964 }
965
966 dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
967 i2c_encode_flags_to_addr(client));
968}
969
970int i2c_dev_irq_from_resources(const struct resource *resources,
971 unsigned int num_resources)
972{
973 struct irq_data *irqd;
974 int i;
975
976 for (i = 0; i < num_resources; i++) {
977 const struct resource *r = &resources[i];
978
979 if (resource_type(r) != IORESOURCE_IRQ)
980 continue;
981
982 if (r->flags & IORESOURCE_BITS) {
983 irqd = irq_get_irq_data(r->start);
984 if (!irqd)
985 break;
986
987 irqd_set_trigger_type(irqd, r->flags & IORESOURCE_BITS);
988 }
989
990 return r->start;
991 }
992
993 return 0;
994}
995
996/**
997 * i2c_new_client_device - instantiate an i2c device
998 * @adap: the adapter managing the device
999 * @info: describes one I2C device; bus_num is ignored
1000 * Context: can sleep
1001 *
1002 * Create an i2c device. Binding is handled through driver model
1003 * probe()/remove() methods. A driver may be bound to this device when we
1004 * return from this function, or any later moment (e.g. maybe hotplugging will
1005 * load the driver module). This call is not appropriate for use by mainboard
1006 * initialization logic, which usually runs during an arch_initcall() long
1007 * before any i2c_adapter could exist.
1008 *
1009 * This returns the new i2c client, which may be saved for later use with
1010 * i2c_unregister_device(); or an ERR_PTR to describe the error.
1011 */
1012struct i2c_client *
1013i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
1014{
1015 struct i2c_client *client;
1016 int status;
1017
1018 client = kzalloc(sizeof *client, GFP_KERNEL);
1019 if (!client)
1020 return ERR_PTR(-ENOMEM);
1021
1022 client->adapter = adap;
1023
1024 client->dev.platform_data = info->platform_data;
1025 client->flags = info->flags;
1026 client->addr = info->addr;
1027
1028 client->init_irq = info->irq;
1029 if (!client->init_irq)
1030 client->init_irq = i2c_dev_irq_from_resources(info->resources,
1031 info->num_resources);
1032
1033 strlcpy(client->name, info->type, sizeof(client->name));
1034
1035 status = i2c_check_addr_validity(client->addr, client->flags);
1036 if (status) {
1037 dev_err(&adap->dev, "Invalid %d-bit I2C address 0x%02hx\n",
1038 client->flags & I2C_CLIENT_TEN ? 10 : 7, client->addr);
1039 goto out_err_silent;
1040 }
1041
1042 /* Check for address business */
1043 status = i2c_check_addr_busy(adap, i2c_encode_flags_to_addr(client));
1044 if (status)
1045 goto out_err;
1046
1047 client->dev.parent = &client->adapter->dev;
1048 client->dev.bus = &i2c_bus_type;
1049 client->dev.type = &i2c_client_type;
1050 client->dev.of_node = of_node_get(info->of_node);
1051 client->dev.fwnode = info->fwnode;
1052
1053 i2c_dev_set_name(adap, client, info);
1054
1055 if (info->swnode) {
1056 status = device_add_software_node(&client->dev, info->swnode);
1057 if (status) {
1058 dev_err(&adap->dev,
1059 "Failed to add software node to client %s: %d\n",
1060 client->name, status);
1061 goto out_err_put_of_node;
1062 }
1063 }
1064
1065 status = device_register(&client->dev);
1066 if (status)
1067 goto out_remove_swnode;
1068
1069 dev_dbg(&adap->dev, "client [%s] registered with bus id %s\n",
1070 client->name, dev_name(&client->dev));
1071
1072 return client;
1073
1074out_remove_swnode:
1075 device_remove_software_node(&client->dev);
1076out_err_put_of_node:
1077 of_node_put(info->of_node);
1078out_err:
1079 dev_err(&adap->dev,
1080 "Failed to register i2c client %s at 0x%02x (%d)\n",
1081 client->name, client->addr, status);
1082out_err_silent:
1083 kfree(client);
1084 return ERR_PTR(status);
1085}
1086EXPORT_SYMBOL_GPL(i2c_new_client_device);
1087
1088/**
1089 * i2c_unregister_device - reverse effect of i2c_new_*_device()
1090 * @client: value returned from i2c_new_*_device()
1091 * Context: can sleep
1092 */
1093void i2c_unregister_device(struct i2c_client *client)
1094{
1095 if (IS_ERR_OR_NULL(client))
1096 return;
1097
1098 if (client->dev.of_node) {
1099 of_node_clear_flag(client->dev.of_node, OF_POPULATED);
1100 of_node_put(client->dev.of_node);
1101 }
1102
1103 if (ACPI_COMPANION(&client->dev))
1104 acpi_device_clear_enumerated(ACPI_COMPANION(&client->dev));
1105 device_remove_software_node(&client->dev);
1106 device_unregister(&client->dev);
1107}
1108EXPORT_SYMBOL_GPL(i2c_unregister_device);
1109
1110
1111static const struct i2c_device_id dummy_id[] = {
1112 { "dummy", 0 },
1113 { },
1114};
1115
1116static int dummy_probe(struct i2c_client *client,
1117 const struct i2c_device_id *id)
1118{
1119 return 0;
1120}
1121
1122static int dummy_remove(struct i2c_client *client)
1123{
1124 return 0;
1125}
1126
1127static struct i2c_driver dummy_driver = {
1128 .driver.name = "dummy",
1129 .probe = dummy_probe,
1130 .remove = dummy_remove,
1131 .id_table = dummy_id,
1132};
1133
1134/**
1135 * i2c_new_dummy_device - return a new i2c device bound to a dummy driver
1136 * @adapter: the adapter managing the device
1137 * @address: seven bit address to be used
1138 * Context: can sleep
1139 *
1140 * This returns an I2C client bound to the "dummy" driver, intended for use
1141 * with devices that consume multiple addresses. Examples of such chips
1142 * include various EEPROMS (like 24c04 and 24c08 models).
1143 *
1144 * These dummy devices have two main uses. First, most I2C and SMBus calls
1145 * except i2c_transfer() need a client handle; the dummy will be that handle.
1146 * And second, this prevents the specified address from being bound to a
1147 * different driver.
1148 *
1149 * This returns the new i2c client, which should be saved for later use with
1150 * i2c_unregister_device(); or an ERR_PTR to describe the error.
1151 */
1152struct i2c_client *i2c_new_dummy_device(struct i2c_adapter *adapter, u16 address)
1153{
1154 struct i2c_board_info info = {
1155 I2C_BOARD_INFO("dummy", address),
1156 };
1157
1158 return i2c_new_client_device(adapter, &info);
1159}
1160EXPORT_SYMBOL_GPL(i2c_new_dummy_device);
1161
1162static void devm_i2c_release_dummy(void *client)
1163{
1164 i2c_unregister_device(client);
1165}
1166
1167/**
1168 * devm_i2c_new_dummy_device - return a new i2c device bound to a dummy driver
1169 * @dev: device the managed resource is bound to
1170 * @adapter: the adapter managing the device
1171 * @address: seven bit address to be used
1172 * Context: can sleep
1173 *
1174 * This is the device-managed version of @i2c_new_dummy_device. It returns the
1175 * new i2c client or an ERR_PTR in case of an error.
1176 */
1177struct i2c_client *devm_i2c_new_dummy_device(struct device *dev,
1178 struct i2c_adapter *adapter,
1179 u16 address)
1180{
1181 struct i2c_client *client;
1182 int ret;
1183
1184 client = i2c_new_dummy_device(adapter, address);
1185 if (IS_ERR(client))
1186 return client;
1187
1188 ret = devm_add_action_or_reset(dev, devm_i2c_release_dummy, client);
1189 if (ret)
1190 return ERR_PTR(ret);
1191
1192 return client;
1193}
1194EXPORT_SYMBOL_GPL(devm_i2c_new_dummy_device);
1195
1196/**
1197 * i2c_new_ancillary_device - Helper to get the instantiated secondary address
1198 * and create the associated device
1199 * @client: Handle to the primary client
1200 * @name: Handle to specify which secondary address to get
1201 * @default_addr: Used as a fallback if no secondary address was specified
1202 * Context: can sleep
1203 *
1204 * I2C clients can be composed of multiple I2C slaves bound together in a single
1205 * component. The I2C client driver then binds to the master I2C slave and needs
1206 * to create I2C dummy clients to communicate with all the other slaves.
1207 *
1208 * This function creates and returns an I2C dummy client whose I2C address is
1209 * retrieved from the platform firmware based on the given slave name. If no
1210 * address is specified by the firmware default_addr is used.
1211 *
1212 * On DT-based platforms the address is retrieved from the "reg" property entry
1213 * cell whose "reg-names" value matches the slave name.
1214 *
1215 * This returns the new i2c client, which should be saved for later use with
1216 * i2c_unregister_device(); or an ERR_PTR to describe the error.
1217 */
1218struct i2c_client *i2c_new_ancillary_device(struct i2c_client *client,
1219 const char *name,
1220 u16 default_addr)
1221{
1222 struct device_node *np = client->dev.of_node;
1223 u32 addr = default_addr;
1224 int i;
1225
1226 if (np) {
1227 i = of_property_match_string(np, "reg-names", name);
1228 if (i >= 0)
1229 of_property_read_u32_index(np, "reg", i, &addr);
1230 }
1231
1232 dev_dbg(&client->adapter->dev, "Address for %s : 0x%x\n", name, addr);
1233 return i2c_new_dummy_device(client->adapter, addr);
1234}
1235EXPORT_SYMBOL_GPL(i2c_new_ancillary_device);
1236
1237/* ------------------------------------------------------------------------- */
1238
1239/* I2C bus adapters -- one roots each I2C or SMBUS segment */
1240
1241static void i2c_adapter_dev_release(struct device *dev)
1242{
1243 struct i2c_adapter *adap = to_i2c_adapter(dev);
1244 complete(&adap->dev_released);
1245}
1246
1247unsigned int i2c_adapter_depth(struct i2c_adapter *adapter)
1248{
1249 unsigned int depth = 0;
1250
1251 while ((adapter = i2c_parent_is_i2c_adapter(adapter)))
1252 depth++;
1253
1254 WARN_ONCE(depth >= MAX_LOCKDEP_SUBCLASSES,
1255 "adapter depth exceeds lockdep subclass limit\n");
1256
1257 return depth;
1258}
1259EXPORT_SYMBOL_GPL(i2c_adapter_depth);
1260
1261/*
1262 * Let users instantiate I2C devices through sysfs. This can be used when
1263 * platform initialization code doesn't contain the proper data for
1264 * whatever reason. Also useful for drivers that do device detection and
1265 * detection fails, either because the device uses an unexpected address,
1266 * or this is a compatible device with different ID register values.
1267 *
1268 * Parameter checking may look overzealous, but we really don't want
1269 * the user to provide incorrect parameters.
1270 */
1271static ssize_t
1272new_device_store(struct device *dev, struct device_attribute *attr,
1273 const char *buf, size_t count)
1274{
1275 struct i2c_adapter *adap = to_i2c_adapter(dev);
1276 struct i2c_board_info info;
1277 struct i2c_client *client;
1278 char *blank, end;
1279 int res;
1280
1281 memset(&info, 0, sizeof(struct i2c_board_info));
1282
1283 blank = strchr(buf, ' ');
1284 if (!blank) {
1285 dev_err(dev, "%s: Missing parameters\n", "new_device");
1286 return -EINVAL;
1287 }
1288 if (blank - buf > I2C_NAME_SIZE - 1) {
1289 dev_err(dev, "%s: Invalid device name\n", "new_device");
1290 return -EINVAL;
1291 }
1292 memcpy(info.type, buf, blank - buf);
1293
1294 /* Parse remaining parameters, reject extra parameters */
1295 res = sscanf(++blank, "%hi%c", &info.addr, &end);
1296 if (res < 1) {
1297 dev_err(dev, "%s: Can't parse I2C address\n", "new_device");
1298 return -EINVAL;
1299 }
1300 if (res > 1 && end != '\n') {
1301 dev_err(dev, "%s: Extra parameters\n", "new_device");
1302 return -EINVAL;
1303 }
1304
1305 if ((info.addr & I2C_ADDR_OFFSET_TEN_BIT) == I2C_ADDR_OFFSET_TEN_BIT) {
1306 info.addr &= ~I2C_ADDR_OFFSET_TEN_BIT;
1307 info.flags |= I2C_CLIENT_TEN;
1308 }
1309
1310 if (info.addr & I2C_ADDR_OFFSET_SLAVE) {
1311 info.addr &= ~I2C_ADDR_OFFSET_SLAVE;
1312 info.flags |= I2C_CLIENT_SLAVE;
1313 }
1314
1315 client = i2c_new_client_device(adap, &info);
1316 if (IS_ERR(client))
1317 return PTR_ERR(client);
1318
1319 /* Keep track of the added device */
1320 mutex_lock(&adap->userspace_clients_lock);
1321 list_add_tail(&client->detected, &adap->userspace_clients);
1322 mutex_unlock(&adap->userspace_clients_lock);
1323 dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device",
1324 info.type, info.addr);
1325
1326 return count;
1327}
1328static DEVICE_ATTR_WO(new_device);
1329
1330/*
1331 * And of course let the users delete the devices they instantiated, if
1332 * they got it wrong. This interface can only be used to delete devices
1333 * instantiated by i2c_sysfs_new_device above. This guarantees that we
1334 * don't delete devices to which some kernel code still has references.
1335 *
1336 * Parameter checking may look overzealous, but we really don't want
1337 * the user to delete the wrong device.
1338 */
1339static ssize_t
1340delete_device_store(struct device *dev, struct device_attribute *attr,
1341 const char *buf, size_t count)
1342{
1343 struct i2c_adapter *adap = to_i2c_adapter(dev);
1344 struct i2c_client *client, *next;
1345 unsigned short addr;
1346 char end;
1347 int res;
1348
1349 /* Parse parameters, reject extra parameters */
1350 res = sscanf(buf, "%hi%c", &addr, &end);
1351 if (res < 1) {
1352 dev_err(dev, "%s: Can't parse I2C address\n", "delete_device");
1353 return -EINVAL;
1354 }
1355 if (res > 1 && end != '\n') {
1356 dev_err(dev, "%s: Extra parameters\n", "delete_device");
1357 return -EINVAL;
1358 }
1359
1360 /* Make sure the device was added through sysfs */
1361 res = -ENOENT;
1362 mutex_lock_nested(&adap->userspace_clients_lock,
1363 i2c_adapter_depth(adap));
1364 list_for_each_entry_safe(client, next, &adap->userspace_clients,
1365 detected) {
1366 if (i2c_encode_flags_to_addr(client) == addr) {
1367 dev_info(dev, "%s: Deleting device %s at 0x%02hx\n",
1368 "delete_device", client->name, client->addr);
1369
1370 list_del(&client->detected);
1371 i2c_unregister_device(client);
1372 res = count;
1373 break;
1374 }
1375 }
1376 mutex_unlock(&adap->userspace_clients_lock);
1377
1378 if (res < 0)
1379 dev_err(dev, "%s: Can't find device in list\n",
1380 "delete_device");
1381 return res;
1382}
1383static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, S_IWUSR, NULL,
1384 delete_device_store);
1385
1386static struct attribute *i2c_adapter_attrs[] = {
1387 &dev_attr_name.attr,
1388 &dev_attr_new_device.attr,
1389 &dev_attr_delete_device.attr,
1390 NULL
1391};
1392ATTRIBUTE_GROUPS(i2c_adapter);
1393
1394struct device_type i2c_adapter_type = {
1395 .groups = i2c_adapter_groups,
1396 .release = i2c_adapter_dev_release,
1397};
1398EXPORT_SYMBOL_GPL(i2c_adapter_type);
1399
1400/**
1401 * i2c_verify_adapter - return parameter as i2c_adapter or NULL
1402 * @dev: device, probably from some driver model iterator
1403 *
1404 * When traversing the driver model tree, perhaps using driver model
1405 * iterators like @device_for_each_child(), you can't assume very much
1406 * about the nodes you find. Use this function to avoid oopses caused
1407 * by wrongly treating some non-I2C device as an i2c_adapter.
1408 */
1409struct i2c_adapter *i2c_verify_adapter(struct device *dev)
1410{
1411 return (dev->type == &i2c_adapter_type)
1412 ? to_i2c_adapter(dev)
1413 : NULL;
1414}
1415EXPORT_SYMBOL(i2c_verify_adapter);
1416
1417#ifdef CONFIG_I2C_COMPAT
1418static struct class_compat *i2c_adapter_compat_class;
1419#endif
1420
1421static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
1422{
1423 struct i2c_devinfo *devinfo;
1424
1425 down_read(&__i2c_board_lock);
1426 list_for_each_entry(devinfo, &__i2c_board_list, list) {
1427 if (devinfo->busnum == adapter->nr &&
1428 IS_ERR(i2c_new_client_device(adapter, &devinfo->board_info)))
1429 dev_err(&adapter->dev,
1430 "Can't create device at 0x%02x\n",
1431 devinfo->board_info.addr);
1432 }
1433 up_read(&__i2c_board_lock);
1434}
1435
1436static int i2c_do_add_adapter(struct i2c_driver *driver,
1437 struct i2c_adapter *adap)
1438{
1439 /* Detect supported devices on that bus, and instantiate them */
1440 i2c_detect(adap, driver);
1441
1442 return 0;
1443}
1444
1445static int __process_new_adapter(struct device_driver *d, void *data)
1446{
1447 return i2c_do_add_adapter(to_i2c_driver(d), data);
1448}
1449
1450static const struct i2c_lock_operations i2c_adapter_lock_ops = {
1451 .lock_bus = i2c_adapter_lock_bus,
1452 .trylock_bus = i2c_adapter_trylock_bus,
1453 .unlock_bus = i2c_adapter_unlock_bus,
1454};
1455
1456static void i2c_host_notify_irq_teardown(struct i2c_adapter *adap)
1457{
1458 struct irq_domain *domain = adap->host_notify_domain;
1459 irq_hw_number_t hwirq;
1460
1461 if (!domain)
1462 return;
1463
1464 for (hwirq = 0 ; hwirq < I2C_ADDR_7BITS_COUNT ; hwirq++)
1465 irq_dispose_mapping(irq_find_mapping(domain, hwirq));
1466
1467 irq_domain_remove(domain);
1468 adap->host_notify_domain = NULL;
1469}
1470
1471static int i2c_host_notify_irq_map(struct irq_domain *h,
1472 unsigned int virq,
1473 irq_hw_number_t hw_irq_num)
1474{
1475 irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_simple_irq);
1476
1477 return 0;
1478}
1479
1480static const struct irq_domain_ops i2c_host_notify_irq_ops = {
1481 .map = i2c_host_notify_irq_map,
1482};
1483
1484static int i2c_setup_host_notify_irq_domain(struct i2c_adapter *adap)
1485{
1486 struct irq_domain *domain;
1487
1488 if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_HOST_NOTIFY))
1489 return 0;
1490
1491 domain = irq_domain_create_linear(adap->dev.parent->fwnode,
1492 I2C_ADDR_7BITS_COUNT,
1493 &i2c_host_notify_irq_ops, adap);
1494 if (!domain)
1495 return -ENOMEM;
1496
1497 adap->host_notify_domain = domain;
1498
1499 return 0;
1500}
1501
1502/**
1503 * i2c_handle_smbus_host_notify - Forward a Host Notify event to the correct
1504 * I2C client.
1505 * @adap: the adapter
1506 * @addr: the I2C address of the notifying device
1507 * Context: can't sleep
1508 *
1509 * Helper function to be called from an I2C bus driver's interrupt
1510 * handler. It will schedule the Host Notify IRQ.
1511 */
1512int i2c_handle_smbus_host_notify(struct i2c_adapter *adap, unsigned short addr)
1513{
1514 int irq;
1515
1516 if (!adap)
1517 return -EINVAL;
1518
1519 irq = irq_find_mapping(adap->host_notify_domain, addr);
1520 if (irq <= 0)
1521 return -ENXIO;
1522
1523 generic_handle_irq(irq);
1524
1525 return 0;
1526}
1527EXPORT_SYMBOL_GPL(i2c_handle_smbus_host_notify);
1528
1529static int i2c_register_adapter(struct i2c_adapter *adap)
1530{
1531 int res = -EINVAL;
1532
1533 /* Can't register until after driver model init */
1534 if (WARN_ON(!is_registered)) {
1535 res = -EAGAIN;
1536 goto out_list;
1537 }
1538
1539 /* Sanity checks */
1540 if (WARN(!adap->name[0], "i2c adapter has no name"))
1541 goto out_list;
1542
1543 if (!adap->algo) {
1544 pr_err("adapter '%s': no algo supplied!\n", adap->name);
1545 goto out_list;
1546 }
1547
1548 if (!adap->lock_ops)
1549 adap->lock_ops = &i2c_adapter_lock_ops;
1550
1551 adap->locked_flags = 0;
1552 rt_mutex_init(&adap->bus_lock);
1553 rt_mutex_init(&adap->mux_lock);
1554 mutex_init(&adap->userspace_clients_lock);
1555 INIT_LIST_HEAD(&adap->userspace_clients);
1556
1557 /* Set default timeout to 1 second if not already set */
1558 if (adap->timeout == 0)
1559 adap->timeout = HZ;
1560
1561 /* register soft irqs for Host Notify */
1562 res = i2c_setup_host_notify_irq_domain(adap);
1563 if (res) {
1564 pr_err("adapter '%s': can't create Host Notify IRQs (%d)\n",
1565 adap->name, res);
1566 goto out_list;
1567 }
1568
1569 dev_set_name(&adap->dev, "i2c-%d", adap->nr);
1570 adap->dev.bus = &i2c_bus_type;
1571 adap->dev.type = &i2c_adapter_type;
1572 res = device_register(&adap->dev);
1573 if (res) {
1574 pr_err("adapter '%s': can't register device (%d)\n", adap->name, res);
1575 goto out_list;
1576 }
1577
1578 res = of_i2c_setup_smbus_alert(adap);
1579 if (res)
1580 goto out_reg;
1581
1582 pm_runtime_no_callbacks(&adap->dev);
1583 pm_suspend_ignore_children(&adap->dev, true);
1584 pm_runtime_enable(&adap->dev);
1585
1586 res = i2c_init_recovery(adap);
1587 if (res == -EPROBE_DEFER)
1588 goto out_reg;
1589
1590 dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
1591
1592#ifdef CONFIG_I2C_COMPAT
1593 res = class_compat_create_link(i2c_adapter_compat_class, &adap->dev,
1594 adap->dev.parent);
1595 if (res)
1596 dev_warn(&adap->dev,
1597 "Failed to create compatibility class link\n");
1598#endif
1599
1600 /* create pre-declared device nodes */
1601 of_i2c_register_devices(adap);
1602 i2c_acpi_install_space_handler(adap);
1603 i2c_acpi_register_devices(adap);
1604
1605 if (adap->nr < __i2c_first_dynamic_bus_num)
1606 i2c_scan_static_board_info(adap);
1607
1608 /* Notify drivers */
1609 mutex_lock(&core_lock);
1610 bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter);
1611 mutex_unlock(&core_lock);
1612
1613 return 0;
1614
1615out_reg:
1616 init_completion(&adap->dev_released);
1617 device_unregister(&adap->dev);
1618 wait_for_completion(&adap->dev_released);
1619out_list:
1620 mutex_lock(&core_lock);
1621 idr_remove(&i2c_adapter_idr, adap->nr);
1622 mutex_unlock(&core_lock);
1623 return res;
1624}
1625
1626/**
1627 * __i2c_add_numbered_adapter - i2c_add_numbered_adapter where nr is never -1
1628 * @adap: the adapter to register (with adap->nr initialized)
1629 * Context: can sleep
1630 *
1631 * See i2c_add_numbered_adapter() for details.
1632 */
1633static int __i2c_add_numbered_adapter(struct i2c_adapter *adap)
1634{
1635 int id;
1636
1637 mutex_lock(&core_lock);
1638 id = idr_alloc(&i2c_adapter_idr, adap, adap->nr, adap->nr + 1, GFP_KERNEL);
1639 mutex_unlock(&core_lock);
1640 if (WARN(id < 0, "couldn't get idr"))
1641 return id == -ENOSPC ? -EBUSY : id;
1642
1643 return i2c_register_adapter(adap);
1644}
1645
1646/**
1647 * i2c_add_adapter - declare i2c adapter, use dynamic bus number
1648 * @adapter: the adapter to add
1649 * Context: can sleep
1650 *
1651 * This routine is used to declare an I2C adapter when its bus number
1652 * doesn't matter or when its bus number is specified by an dt alias.
1653 * Examples of bases when the bus number doesn't matter: I2C adapters
1654 * dynamically added by USB links or PCI plugin cards.
1655 *
1656 * When this returns zero, a new bus number was allocated and stored
1657 * in adap->nr, and the specified adapter became available for clients.
1658 * Otherwise, a negative errno value is returned.
1659 */
1660int i2c_add_adapter(struct i2c_adapter *adapter)
1661{
1662 struct device *dev = &adapter->dev;
1663 int id;
1664
1665 if (dev->of_node) {
1666 id = of_alias_get_id(dev->of_node, "i2c");
1667 if (id >= 0) {
1668 adapter->nr = id;
1669 return __i2c_add_numbered_adapter(adapter);
1670 }
1671 }
1672
1673 mutex_lock(&core_lock);
1674 id = idr_alloc(&i2c_adapter_idr, adapter,
1675 __i2c_first_dynamic_bus_num, 0, GFP_KERNEL);
1676 mutex_unlock(&core_lock);
1677 if (WARN(id < 0, "couldn't get idr"))
1678 return id;
1679
1680 adapter->nr = id;
1681
1682 return i2c_register_adapter(adapter);
1683}
1684EXPORT_SYMBOL(i2c_add_adapter);
1685
1686/**
1687 * i2c_add_numbered_adapter - declare i2c adapter, use static bus number
1688 * @adap: the adapter to register (with adap->nr initialized)
1689 * Context: can sleep
1690 *
1691 * This routine is used to declare an I2C adapter when its bus number
1692 * matters. For example, use it for I2C adapters from system-on-chip CPUs,
1693 * or otherwise built in to the system's mainboard, and where i2c_board_info
1694 * is used to properly configure I2C devices.
1695 *
1696 * If the requested bus number is set to -1, then this function will behave
1697 * identically to i2c_add_adapter, and will dynamically assign a bus number.
1698 *
1699 * If no devices have pre-been declared for this bus, then be sure to
1700 * register the adapter before any dynamically allocated ones. Otherwise
1701 * the required bus ID may not be available.
1702 *
1703 * When this returns zero, the specified adapter became available for
1704 * clients using the bus number provided in adap->nr. Also, the table
1705 * of I2C devices pre-declared using i2c_register_board_info() is scanned,
1706 * and the appropriate driver model device nodes are created. Otherwise, a
1707 * negative errno value is returned.
1708 */
1709int i2c_add_numbered_adapter(struct i2c_adapter *adap)
1710{
1711 if (adap->nr == -1) /* -1 means dynamically assign bus id */
1712 return i2c_add_adapter(adap);
1713
1714 return __i2c_add_numbered_adapter(adap);
1715}
1716EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter);
1717
1718static void i2c_do_del_adapter(struct i2c_driver *driver,
1719 struct i2c_adapter *adapter)
1720{
1721 struct i2c_client *client, *_n;
1722
1723 /* Remove the devices we created ourselves as the result of hardware
1724 * probing (using a driver's detect method) */
1725 list_for_each_entry_safe(client, _n, &driver->clients, detected) {
1726 if (client->adapter == adapter) {
1727 dev_dbg(&adapter->dev, "Removing %s at 0x%x\n",
1728 client->name, client->addr);
1729 list_del(&client->detected);
1730 i2c_unregister_device(client);
1731 }
1732 }
1733}
1734
1735static int __unregister_client(struct device *dev, void *dummy)
1736{
1737 struct i2c_client *client = i2c_verify_client(dev);
1738 if (client && strcmp(client->name, "dummy"))
1739 i2c_unregister_device(client);
1740 return 0;
1741}
1742
1743static int __unregister_dummy(struct device *dev, void *dummy)
1744{
1745 struct i2c_client *client = i2c_verify_client(dev);
1746 i2c_unregister_device(client);
1747 return 0;
1748}
1749
1750static int __process_removed_adapter(struct device_driver *d, void *data)
1751{
1752 i2c_do_del_adapter(to_i2c_driver(d), data);
1753 return 0;
1754}
1755
1756/**
1757 * i2c_del_adapter - unregister I2C adapter
1758 * @adap: the adapter being unregistered
1759 * Context: can sleep
1760 *
1761 * This unregisters an I2C adapter which was previously registered
1762 * by @i2c_add_adapter or @i2c_add_numbered_adapter.
1763 */
1764void i2c_del_adapter(struct i2c_adapter *adap)
1765{
1766 struct i2c_adapter *found;
1767 struct i2c_client *client, *next;
1768
1769 /* First make sure that this adapter was ever added */
1770 mutex_lock(&core_lock);
1771 found = idr_find(&i2c_adapter_idr, adap->nr);
1772 mutex_unlock(&core_lock);
1773 if (found != adap) {
1774 pr_debug("attempting to delete unregistered adapter [%s]\n", adap->name);
1775 return;
1776 }
1777
1778 i2c_acpi_remove_space_handler(adap);
1779 /* Tell drivers about this removal */
1780 mutex_lock(&core_lock);
1781 bus_for_each_drv(&i2c_bus_type, NULL, adap,
1782 __process_removed_adapter);
1783 mutex_unlock(&core_lock);
1784
1785 /* Remove devices instantiated from sysfs */
1786 mutex_lock_nested(&adap->userspace_clients_lock,
1787 i2c_adapter_depth(adap));
1788 list_for_each_entry_safe(client, next, &adap->userspace_clients,
1789 detected) {
1790 dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name,
1791 client->addr);
1792 list_del(&client->detected);
1793 i2c_unregister_device(client);
1794 }
1795 mutex_unlock(&adap->userspace_clients_lock);
1796
1797 /* Detach any active clients. This can't fail, thus we do not
1798 * check the returned value. This is a two-pass process, because
1799 * we can't remove the dummy devices during the first pass: they
1800 * could have been instantiated by real devices wishing to clean
1801 * them up properly, so we give them a chance to do that first. */
1802 device_for_each_child(&adap->dev, NULL, __unregister_client);
1803 device_for_each_child(&adap->dev, NULL, __unregister_dummy);
1804
1805#ifdef CONFIG_I2C_COMPAT
1806 class_compat_remove_link(i2c_adapter_compat_class, &adap->dev,
1807 adap->dev.parent);
1808#endif
1809
1810 /* device name is gone after device_unregister */
1811 dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name);
1812
1813 pm_runtime_disable(&adap->dev);
1814
1815 i2c_host_notify_irq_teardown(adap);
1816
1817 /* wait until all references to the device are gone
1818 *
1819 * FIXME: This is old code and should ideally be replaced by an
1820 * alternative which results in decoupling the lifetime of the struct
1821 * device from the i2c_adapter, like spi or netdev do. Any solution
1822 * should be thoroughly tested with DEBUG_KOBJECT_RELEASE enabled!
1823 */
1824 init_completion(&adap->dev_released);
1825 device_unregister(&adap->dev);
1826 wait_for_completion(&adap->dev_released);
1827
1828 /* free bus id */
1829 mutex_lock(&core_lock);
1830 idr_remove(&i2c_adapter_idr, adap->nr);
1831 mutex_unlock(&core_lock);
1832
1833 /* Clear the device structure in case this adapter is ever going to be
1834 added again */
1835 memset(&adap->dev, 0, sizeof(adap->dev));
1836}
1837EXPORT_SYMBOL(i2c_del_adapter);
1838
1839static void devm_i2c_del_adapter(void *adapter)
1840{
1841 i2c_del_adapter(adapter);
1842}
1843
1844/**
1845 * devm_i2c_add_adapter - device-managed variant of i2c_add_adapter()
1846 * @dev: managing device for adding this I2C adapter
1847 * @adapter: the adapter to add
1848 * Context: can sleep
1849 *
1850 * Add adapter with dynamic bus number, same with i2c_add_adapter()
1851 * but the adapter will be auto deleted on driver detach.
1852 */
1853int devm_i2c_add_adapter(struct device *dev, struct i2c_adapter *adapter)
1854{
1855 int ret;
1856
1857 ret = i2c_add_adapter(adapter);
1858 if (ret)
1859 return ret;
1860
1861 return devm_add_action_or_reset(dev, devm_i2c_del_adapter, adapter);
1862}
1863EXPORT_SYMBOL_GPL(devm_i2c_add_adapter);
1864
1865static void i2c_parse_timing(struct device *dev, char *prop_name, u32 *cur_val_p,
1866 u32 def_val, bool use_def)
1867{
1868 int ret;
1869
1870 ret = device_property_read_u32(dev, prop_name, cur_val_p);
1871 if (ret && use_def)
1872 *cur_val_p = def_val;
1873
1874 dev_dbg(dev, "%s: %u\n", prop_name, *cur_val_p);
1875}
1876
1877/**
1878 * i2c_parse_fw_timings - get I2C related timing parameters from firmware
1879 * @dev: The device to scan for I2C timing properties
1880 * @t: the i2c_timings struct to be filled with values
1881 * @use_defaults: bool to use sane defaults derived from the I2C specification
1882 * when properties are not found, otherwise don't update
1883 *
1884 * Scan the device for the generic I2C properties describing timing parameters
1885 * for the signal and fill the given struct with the results. If a property was
1886 * not found and use_defaults was true, then maximum timings are assumed which
1887 * are derived from the I2C specification. If use_defaults is not used, the
1888 * results will be as before, so drivers can apply their own defaults before
1889 * calling this helper. The latter is mainly intended for avoiding regressions
1890 * of existing drivers which want to switch to this function. New drivers
1891 * almost always should use the defaults.
1892 */
1893void i2c_parse_fw_timings(struct device *dev, struct i2c_timings *t, bool use_defaults)
1894{
1895 bool u = use_defaults;
1896 u32 d;
1897
1898 i2c_parse_timing(dev, "clock-frequency", &t->bus_freq_hz,
1899 I2C_MAX_STANDARD_MODE_FREQ, u);
1900
1901 d = t->bus_freq_hz <= I2C_MAX_STANDARD_MODE_FREQ ? 1000 :
1902 t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ ? 300 : 120;
1903 i2c_parse_timing(dev, "i2c-scl-rising-time-ns", &t->scl_rise_ns, d, u);
1904
1905 d = t->bus_freq_hz <= I2C_MAX_FAST_MODE_FREQ ? 300 : 120;
1906 i2c_parse_timing(dev, "i2c-scl-falling-time-ns", &t->scl_fall_ns, d, u);
1907
1908 i2c_parse_timing(dev, "i2c-scl-internal-delay-ns",
1909 &t->scl_int_delay_ns, 0, u);
1910 i2c_parse_timing(dev, "i2c-sda-falling-time-ns", &t->sda_fall_ns,
1911 t->scl_fall_ns, u);
1912 i2c_parse_timing(dev, "i2c-sda-hold-time-ns", &t->sda_hold_ns, 0, u);
1913 i2c_parse_timing(dev, "i2c-digital-filter-width-ns",
1914 &t->digital_filter_width_ns, 0, u);
1915 i2c_parse_timing(dev, "i2c-analog-filter-cutoff-frequency",
1916 &t->analog_filter_cutoff_freq_hz, 0, u);
1917}
1918EXPORT_SYMBOL_GPL(i2c_parse_fw_timings);
1919
1920/* ------------------------------------------------------------------------- */
1921
1922int i2c_for_each_dev(void *data, int (*fn)(struct device *dev, void *data))
1923{
1924 int res;
1925
1926 mutex_lock(&core_lock);
1927 res = bus_for_each_dev(&i2c_bus_type, NULL, data, fn);
1928 mutex_unlock(&core_lock);
1929
1930 return res;
1931}
1932EXPORT_SYMBOL_GPL(i2c_for_each_dev);
1933
1934static int __process_new_driver(struct device *dev, void *data)
1935{
1936 if (dev->type != &i2c_adapter_type)
1937 return 0;
1938 return i2c_do_add_adapter(data, to_i2c_adapter(dev));
1939}
1940
1941/*
1942 * An i2c_driver is used with one or more i2c_client (device) nodes to access
1943 * i2c slave chips, on a bus instance associated with some i2c_adapter.
1944 */
1945
1946int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
1947{
1948 int res;
1949
1950 /* Can't register until after driver model init */
1951 if (WARN_ON(!is_registered))
1952 return -EAGAIN;
1953
1954 /* add the driver to the list of i2c drivers in the driver core */
1955 driver->driver.owner = owner;
1956 driver->driver.bus = &i2c_bus_type;
1957 INIT_LIST_HEAD(&driver->clients);
1958
1959 /* When registration returns, the driver core
1960 * will have called probe() for all matching-but-unbound devices.
1961 */
1962 res = driver_register(&driver->driver);
1963 if (res)
1964 return res;
1965
1966 pr_debug("driver [%s] registered\n", driver->driver.name);
1967
1968 /* Walk the adapters that are already present */
1969 i2c_for_each_dev(driver, __process_new_driver);
1970
1971 return 0;
1972}
1973EXPORT_SYMBOL(i2c_register_driver);
1974
1975static int __process_removed_driver(struct device *dev, void *data)
1976{
1977 if (dev->type == &i2c_adapter_type)
1978 i2c_do_del_adapter(data, to_i2c_adapter(dev));
1979 return 0;
1980}
1981
1982/**
1983 * i2c_del_driver - unregister I2C driver
1984 * @driver: the driver being unregistered
1985 * Context: can sleep
1986 */
1987void i2c_del_driver(struct i2c_driver *driver)
1988{
1989 i2c_for_each_dev(driver, __process_removed_driver);
1990
1991 driver_unregister(&driver->driver);
1992 pr_debug("driver [%s] unregistered\n", driver->driver.name);
1993}
1994EXPORT_SYMBOL(i2c_del_driver);
1995
1996/* ------------------------------------------------------------------------- */
1997
1998struct i2c_cmd_arg {
1999 unsigned cmd;
2000 void *arg;
2001};
2002
2003static int i2c_cmd(struct device *dev, void *_arg)
2004{
2005 struct i2c_client *client = i2c_verify_client(dev);
2006 struct i2c_cmd_arg *arg = _arg;
2007 struct i2c_driver *driver;
2008
2009 if (!client || !client->dev.driver)
2010 return 0;
2011
2012 driver = to_i2c_driver(client->dev.driver);
2013 if (driver->command)
2014 driver->command(client, arg->cmd, arg->arg);
2015 return 0;
2016}
2017
2018void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg)
2019{
2020 struct i2c_cmd_arg cmd_arg;
2021
2022 cmd_arg.cmd = cmd;
2023 cmd_arg.arg = arg;
2024 device_for_each_child(&adap->dev, &cmd_arg, i2c_cmd);
2025}
2026EXPORT_SYMBOL(i2c_clients_command);
2027
2028static int __init i2c_init(void)
2029{
2030 int retval;
2031
2032 retval = of_alias_get_highest_id("i2c");
2033
2034 down_write(&__i2c_board_lock);
2035 if (retval >= __i2c_first_dynamic_bus_num)
2036 __i2c_first_dynamic_bus_num = retval + 1;
2037 up_write(&__i2c_board_lock);
2038
2039 retval = bus_register(&i2c_bus_type);
2040 if (retval)
2041 return retval;
2042
2043 is_registered = true;
2044
2045#ifdef CONFIG_I2C_COMPAT
2046 i2c_adapter_compat_class = class_compat_register("i2c-adapter");
2047 if (!i2c_adapter_compat_class) {
2048 retval = -ENOMEM;
2049 goto bus_err;
2050 }
2051#endif
2052 retval = i2c_add_driver(&dummy_driver);
2053 if (retval)
2054 goto class_err;
2055
2056 if (IS_ENABLED(CONFIG_OF_DYNAMIC))
2057 WARN_ON(of_reconfig_notifier_register(&i2c_of_notifier));
2058 if (IS_ENABLED(CONFIG_ACPI))
2059 WARN_ON(acpi_reconfig_notifier_register(&i2c_acpi_notifier));
2060
2061 return 0;
2062
2063class_err:
2064#ifdef CONFIG_I2C_COMPAT
2065 class_compat_unregister(i2c_adapter_compat_class);
2066bus_err:
2067#endif
2068 is_registered = false;
2069 bus_unregister(&i2c_bus_type);
2070 return retval;
2071}
2072
2073static void __exit i2c_exit(void)
2074{
2075 if (IS_ENABLED(CONFIG_ACPI))
2076 WARN_ON(acpi_reconfig_notifier_unregister(&i2c_acpi_notifier));
2077 if (IS_ENABLED(CONFIG_OF_DYNAMIC))
2078 WARN_ON(of_reconfig_notifier_unregister(&i2c_of_notifier));
2079 i2c_del_driver(&dummy_driver);
2080#ifdef CONFIG_I2C_COMPAT
2081 class_compat_unregister(i2c_adapter_compat_class);
2082#endif
2083 bus_unregister(&i2c_bus_type);
2084 tracepoint_synchronize_unregister();
2085}
2086
2087/* We must initialize early, because some subsystems register i2c drivers
2088 * in subsys_initcall() code, but are linked (and initialized) before i2c.
2089 */
2090postcore_initcall(i2c_init);
2091module_exit(i2c_exit);
2092
2093/* ----------------------------------------------------
2094 * the functional interface to the i2c busses.
2095 * ----------------------------------------------------
2096 */
2097
2098/* Check if val is exceeding the quirk IFF quirk is non 0 */
2099#define i2c_quirk_exceeded(val, quirk) ((quirk) && ((val) > (quirk)))
2100
2101static int i2c_quirk_error(struct i2c_adapter *adap, struct i2c_msg *msg, char *err_msg)
2102{
2103 dev_err_ratelimited(&adap->dev, "adapter quirk: %s (addr 0x%04x, size %u, %s)\n",
2104 err_msg, msg->addr, msg->len,
2105 msg->flags & I2C_M_RD ? "read" : "write");
2106 return -EOPNOTSUPP;
2107}
2108
2109static int i2c_check_for_quirks(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
2110{
2111 const struct i2c_adapter_quirks *q = adap->quirks;
2112 int max_num = q->max_num_msgs, i;
2113 bool do_len_check = true;
2114
2115 if (q->flags & I2C_AQ_COMB) {
2116 max_num = 2;
2117
2118 /* special checks for combined messages */
2119 if (num == 2) {
2120 if (q->flags & I2C_AQ_COMB_WRITE_FIRST && msgs[0].flags & I2C_M_RD)
2121 return i2c_quirk_error(adap, &msgs[0], "1st comb msg must be write");
2122
2123 if (q->flags & I2C_AQ_COMB_READ_SECOND && !(msgs[1].flags & I2C_M_RD))
2124 return i2c_quirk_error(adap, &msgs[1], "2nd comb msg must be read");
2125
2126 if (q->flags & I2C_AQ_COMB_SAME_ADDR && msgs[0].addr != msgs[1].addr)
2127 return i2c_quirk_error(adap, &msgs[0], "comb msg only to same addr");
2128
2129 if (i2c_quirk_exceeded(msgs[0].len, q->max_comb_1st_msg_len))
2130 return i2c_quirk_error(adap, &msgs[0], "msg too long");
2131
2132 if (i2c_quirk_exceeded(msgs[1].len, q->max_comb_2nd_msg_len))
2133 return i2c_quirk_error(adap, &msgs[1], "msg too long");
2134
2135 do_len_check = false;
2136 }
2137 }
2138
2139 if (i2c_quirk_exceeded(num, max_num))
2140 return i2c_quirk_error(adap, &msgs[0], "too many messages");
2141
2142 for (i = 0; i < num; i++) {
2143 u16 len = msgs[i].len;
2144
2145 if (msgs[i].flags & I2C_M_RD) {
2146 if (do_len_check && i2c_quirk_exceeded(len, q->max_read_len))
2147 return i2c_quirk_error(adap, &msgs[i], "msg too long");
2148
2149 if (q->flags & I2C_AQ_NO_ZERO_LEN_READ && len == 0)
2150 return i2c_quirk_error(adap, &msgs[i], "no zero length");
2151 } else {
2152 if (do_len_check && i2c_quirk_exceeded(len, q->max_write_len))
2153 return i2c_quirk_error(adap, &msgs[i], "msg too long");
2154
2155 if (q->flags & I2C_AQ_NO_ZERO_LEN_WRITE && len == 0)
2156 return i2c_quirk_error(adap, &msgs[i], "no zero length");
2157 }
2158 }
2159
2160 return 0;
2161}
2162
2163/**
2164 * __i2c_transfer - unlocked flavor of i2c_transfer
2165 * @adap: Handle to I2C bus
2166 * @msgs: One or more messages to execute before STOP is issued to
2167 * terminate the operation; each message begins with a START.
2168 * @num: Number of messages to be executed.
2169 *
2170 * Returns negative errno, else the number of messages executed.
2171 *
2172 * Adapter lock must be held when calling this function. No debug logging
2173 * takes place. adap->algo->master_xfer existence isn't checked.
2174 */
2175int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
2176{
2177 unsigned long orig_jiffies;
2178 int ret, try;
2179
2180 if (WARN_ON(!msgs || num < 1))
2181 return -EINVAL;
2182
2183 ret = __i2c_check_suspended(adap);
2184 if (ret)
2185 return ret;
2186
2187 if (adap->quirks && i2c_check_for_quirks(adap, msgs, num))
2188 return -EOPNOTSUPP;
2189
2190 /*
2191 * i2c_trace_msg_key gets enabled when tracepoint i2c_transfer gets
2192 * enabled. This is an efficient way of keeping the for-loop from
2193 * being executed when not needed.
2194 */
2195 if (static_branch_unlikely(&i2c_trace_msg_key)) {
2196 int i;
2197 for (i = 0; i < num; i++)
2198 if (msgs[i].flags & I2C_M_RD)
2199 trace_i2c_read(adap, &msgs[i], i);
2200 else
2201 trace_i2c_write(adap, &msgs[i], i);
2202 }
2203
2204 /* Retry automatically on arbitration loss */
2205 orig_jiffies = jiffies;
2206 for (ret = 0, try = 0; try <= adap->retries; try++) {
2207 if (i2c_in_atomic_xfer_mode() && adap->algo->master_xfer_atomic)
2208 ret = adap->algo->master_xfer_atomic(adap, msgs, num);
2209 else
2210 ret = adap->algo->master_xfer(adap, msgs, num);
2211
2212 if (ret != -EAGAIN)
2213 break;
2214 if (time_after(jiffies, orig_jiffies + adap->timeout))
2215 break;
2216 }
2217
2218 if (static_branch_unlikely(&i2c_trace_msg_key)) {
2219 int i;
2220 for (i = 0; i < ret; i++)
2221 if (msgs[i].flags & I2C_M_RD)
2222 trace_i2c_reply(adap, &msgs[i], i);
2223 trace_i2c_result(adap, num, ret);
2224 }
2225
2226 return ret;
2227}
2228EXPORT_SYMBOL(__i2c_transfer);
2229
2230/**
2231 * i2c_transfer - execute a single or combined I2C message
2232 * @adap: Handle to I2C bus
2233 * @msgs: One or more messages to execute before STOP is issued to
2234 * terminate the operation; each message begins with a START.
2235 * @num: Number of messages to be executed.
2236 *
2237 * Returns negative errno, else the number of messages executed.
2238 *
2239 * Note that there is no requirement that each message be sent to
2240 * the same slave address, although that is the most common model.
2241 */
2242int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
2243{
2244 int ret;
2245
2246 if (!adap->algo->master_xfer) {
2247 dev_dbg(&adap->dev, "I2C level transfers not supported\n");
2248 return -EOPNOTSUPP;
2249 }
2250
2251 /* REVISIT the fault reporting model here is weak:
2252 *
2253 * - When we get an error after receiving N bytes from a slave,
2254 * there is no way to report "N".
2255 *
2256 * - When we get a NAK after transmitting N bytes to a slave,
2257 * there is no way to report "N" ... or to let the master
2258 * continue executing the rest of this combined message, if
2259 * that's the appropriate response.
2260 *
2261 * - When for example "num" is two and we successfully complete
2262 * the first message but get an error part way through the
2263 * second, it's unclear whether that should be reported as
2264 * one (discarding status on the second message) or errno
2265 * (discarding status on the first one).
2266 */
2267 ret = __i2c_lock_bus_helper(adap);
2268 if (ret)
2269 return ret;
2270
2271 ret = __i2c_transfer(adap, msgs, num);
2272 i2c_unlock_bus(adap, I2C_LOCK_SEGMENT);
2273
2274 return ret;
2275}
2276EXPORT_SYMBOL(i2c_transfer);
2277
2278/**
2279 * i2c_transfer_buffer_flags - issue a single I2C message transferring data
2280 * to/from a buffer
2281 * @client: Handle to slave device
2282 * @buf: Where the data is stored
2283 * @count: How many bytes to transfer, must be less than 64k since msg.len is u16
2284 * @flags: The flags to be used for the message, e.g. I2C_M_RD for reads
2285 *
2286 * Returns negative errno, or else the number of bytes transferred.
2287 */
2288int i2c_transfer_buffer_flags(const struct i2c_client *client, char *buf,
2289 int count, u16 flags)
2290{
2291 int ret;
2292 struct i2c_msg msg = {
2293 .addr = client->addr,
2294 .flags = flags | (client->flags & I2C_M_TEN),
2295 .len = count,
2296 .buf = buf,
2297 };
2298
2299 ret = i2c_transfer(client->adapter, &msg, 1);
2300
2301 /*
2302 * If everything went ok (i.e. 1 msg transferred), return #bytes
2303 * transferred, else error code.
2304 */
2305 return (ret == 1) ? count : ret;
2306}
2307EXPORT_SYMBOL(i2c_transfer_buffer_flags);
2308
2309/**
2310 * i2c_get_device_id - get manufacturer, part id and die revision of a device
2311 * @client: The device to query
2312 * @id: The queried information
2313 *
2314 * Returns negative errno on error, zero on success.
2315 */
2316int i2c_get_device_id(const struct i2c_client *client,
2317 struct i2c_device_identity *id)
2318{
2319 struct i2c_adapter *adap = client->adapter;
2320 union i2c_smbus_data raw_id;
2321 int ret;
2322
2323 if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
2324 return -EOPNOTSUPP;
2325
2326 raw_id.block[0] = 3;
2327 ret = i2c_smbus_xfer(adap, I2C_ADDR_DEVICE_ID, 0,
2328 I2C_SMBUS_READ, client->addr << 1,
2329 I2C_SMBUS_I2C_BLOCK_DATA, &raw_id);
2330 if (ret)
2331 return ret;
2332
2333 id->manufacturer_id = (raw_id.block[1] << 4) | (raw_id.block[2] >> 4);
2334 id->part_id = ((raw_id.block[2] & 0xf) << 5) | (raw_id.block[3] >> 3);
2335 id->die_revision = raw_id.block[3] & 0x7;
2336 return 0;
2337}
2338EXPORT_SYMBOL_GPL(i2c_get_device_id);
2339
2340/* ----------------------------------------------------
2341 * the i2c address scanning function
2342 * Will not work for 10-bit addresses!
2343 * ----------------------------------------------------
2344 */
2345
2346/*
2347 * Legacy default probe function, mostly relevant for SMBus. The default
2348 * probe method is a quick write, but it is known to corrupt the 24RF08
2349 * EEPROMs due to a state machine bug, and could also irreversibly
2350 * write-protect some EEPROMs, so for address ranges 0x30-0x37 and 0x50-0x5f,
2351 * we use a short byte read instead. Also, some bus drivers don't implement
2352 * quick write, so we fallback to a byte read in that case too.
2353 * On x86, there is another special case for FSC hardware monitoring chips,
2354 * which want regular byte reads (address 0x73.) Fortunately, these are the
2355 * only known chips using this I2C address on PC hardware.
2356 * Returns 1 if probe succeeded, 0 if not.
2357 */
2358static int i2c_default_probe(struct i2c_adapter *adap, unsigned short addr)
2359{
2360 int err;
2361 union i2c_smbus_data dummy;
2362
2363#ifdef CONFIG_X86
2364 if (addr == 0x73 && (adap->class & I2C_CLASS_HWMON)
2365 && i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE_DATA))
2366 err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
2367 I2C_SMBUS_BYTE_DATA, &dummy);
2368 else
2369#endif
2370 if (!((addr & ~0x07) == 0x30 || (addr & ~0x0f) == 0x50)
2371 && i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK))
2372 err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_WRITE, 0,
2373 I2C_SMBUS_QUICK, NULL);
2374 else if (i2c_check_functionality(adap, I2C_FUNC_SMBUS_READ_BYTE))
2375 err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
2376 I2C_SMBUS_BYTE, &dummy);
2377 else {
2378 dev_warn(&adap->dev, "No suitable probing method supported for address 0x%02X\n",
2379 addr);
2380 err = -EOPNOTSUPP;
2381 }
2382
2383 return err >= 0;
2384}
2385
2386static int i2c_detect_address(struct i2c_client *temp_client,
2387 struct i2c_driver *driver)
2388{
2389 struct i2c_board_info info;
2390 struct i2c_adapter *adapter = temp_client->adapter;
2391 int addr = temp_client->addr;
2392 int err;
2393
2394 /* Make sure the address is valid */
2395 err = i2c_check_7bit_addr_validity_strict(addr);
2396 if (err) {
2397 dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n",
2398 addr);
2399 return err;
2400 }
2401
2402 /* Skip if already in use (7 bit, no need to encode flags) */
2403 if (i2c_check_addr_busy(adapter, addr))
2404 return 0;
2405
2406 /* Make sure there is something at this address */
2407 if (!i2c_default_probe(adapter, addr))
2408 return 0;
2409
2410 /* Finally call the custom detection function */
2411 memset(&info, 0, sizeof(struct i2c_board_info));
2412 info.addr = addr;
2413 err = driver->detect(temp_client, &info);
2414 if (err) {
2415 /* -ENODEV is returned if the detection fails. We catch it
2416 here as this isn't an error. */
2417 return err == -ENODEV ? 0 : err;
2418 }
2419
2420 /* Consistency check */
2421 if (info.type[0] == '\0') {
2422 dev_err(&adapter->dev,
2423 "%s detection function provided no name for 0x%x\n",
2424 driver->driver.name, addr);
2425 } else {
2426 struct i2c_client *client;
2427
2428 /* Detection succeeded, instantiate the device */
2429 if (adapter->class & I2C_CLASS_DEPRECATED)
2430 dev_warn(&adapter->dev,
2431 "This adapter will soon drop class based instantiation of devices. "
2432 "Please make sure client 0x%02x gets instantiated by other means. "
2433 "Check 'Documentation/i2c/instantiating-devices.rst' for details.\n",
2434 info.addr);
2435
2436 dev_dbg(&adapter->dev, "Creating %s at 0x%02x\n",
2437 info.type, info.addr);
2438 client = i2c_new_client_device(adapter, &info);
2439 if (!IS_ERR(client))
2440 list_add_tail(&client->detected, &driver->clients);
2441 else
2442 dev_err(&adapter->dev, "Failed creating %s at 0x%02x\n",
2443 info.type, info.addr);
2444 }
2445 return 0;
2446}
2447
2448static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
2449{
2450 const unsigned short *address_list;
2451 struct i2c_client *temp_client;
2452 int i, err = 0;
2453
2454 address_list = driver->address_list;
2455 if (!driver->detect || !address_list)
2456 return 0;
2457
2458 /* Warn that the adapter lost class based instantiation */
2459 if (adapter->class == I2C_CLASS_DEPRECATED) {
2460 dev_dbg(&adapter->dev,
2461 "This adapter dropped support for I2C classes and won't auto-detect %s devices anymore. "
2462 "If you need it, check 'Documentation/i2c/instantiating-devices.rst' for alternatives.\n",
2463 driver->driver.name);
2464 return 0;
2465 }
2466
2467 /* Stop here if the classes do not match */
2468 if (!(adapter->class & driver->class))
2469 return 0;
2470
2471 /* Set up a temporary client to help detect callback */
2472 temp_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
2473 if (!temp_client)
2474 return -ENOMEM;
2475 temp_client->adapter = adapter;
2476
2477 for (i = 0; address_list[i] != I2C_CLIENT_END; i += 1) {
2478 dev_dbg(&adapter->dev,
2479 "found normal entry for adapter %d, addr 0x%02x\n",
2480 i2c_adapter_id(adapter), address_list[i]);
2481 temp_client->addr = address_list[i];
2482 err = i2c_detect_address(temp_client, driver);
2483 if (unlikely(err))
2484 break;
2485 }
2486
2487 kfree(temp_client);
2488 return err;
2489}
2490
2491int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr)
2492{
2493 return i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
2494 I2C_SMBUS_QUICK, NULL) >= 0;
2495}
2496EXPORT_SYMBOL_GPL(i2c_probe_func_quick_read);
2497
2498struct i2c_client *
2499i2c_new_scanned_device(struct i2c_adapter *adap,
2500 struct i2c_board_info *info,
2501 unsigned short const *addr_list,
2502 int (*probe)(struct i2c_adapter *adap, unsigned short addr))
2503{
2504 int i;
2505
2506 if (!probe)
2507 probe = i2c_default_probe;
2508
2509 for (i = 0; addr_list[i] != I2C_CLIENT_END; i++) {
2510 /* Check address validity */
2511 if (i2c_check_7bit_addr_validity_strict(addr_list[i]) < 0) {
2512 dev_warn(&adap->dev, "Invalid 7-bit address 0x%02x\n",
2513 addr_list[i]);
2514 continue;
2515 }
2516
2517 /* Check address availability (7 bit, no need to encode flags) */
2518 if (i2c_check_addr_busy(adap, addr_list[i])) {
2519 dev_dbg(&adap->dev,
2520 "Address 0x%02x already in use, not probing\n",
2521 addr_list[i]);
2522 continue;
2523 }
2524
2525 /* Test address responsiveness */
2526 if (probe(adap, addr_list[i]))
2527 break;
2528 }
2529
2530 if (addr_list[i] == I2C_CLIENT_END) {
2531 dev_dbg(&adap->dev, "Probing failed, no device found\n");
2532 return ERR_PTR(-ENODEV);
2533 }
2534
2535 info->addr = addr_list[i];
2536 return i2c_new_client_device(adap, info);
2537}
2538EXPORT_SYMBOL_GPL(i2c_new_scanned_device);
2539
2540struct i2c_adapter *i2c_get_adapter(int nr)
2541{
2542 struct i2c_adapter *adapter;
2543
2544 mutex_lock(&core_lock);
2545 adapter = idr_find(&i2c_adapter_idr, nr);
2546 if (!adapter)
2547 goto exit;
2548
2549 if (try_module_get(adapter->owner))
2550 get_device(&adapter->dev);
2551 else
2552 adapter = NULL;
2553
2554 exit:
2555 mutex_unlock(&core_lock);
2556 return adapter;
2557}
2558EXPORT_SYMBOL(i2c_get_adapter);
2559
2560void i2c_put_adapter(struct i2c_adapter *adap)
2561{
2562 if (!adap)
2563 return;
2564
2565 put_device(&adap->dev);
2566 module_put(adap->owner);
2567}
2568EXPORT_SYMBOL(i2c_put_adapter);
2569
2570/**
2571 * i2c_get_dma_safe_msg_buf() - get a DMA safe buffer for the given i2c_msg
2572 * @msg: the message to be checked
2573 * @threshold: the minimum number of bytes for which using DMA makes sense.
2574 * Should at least be 1.
2575 *
2576 * Return: NULL if a DMA safe buffer was not obtained. Use msg->buf with PIO.
2577 * Or a valid pointer to be used with DMA. After use, release it by
2578 * calling i2c_put_dma_safe_msg_buf().
2579 *
2580 * This function must only be called from process context!
2581 */
2582u8 *i2c_get_dma_safe_msg_buf(struct i2c_msg *msg, unsigned int threshold)
2583{
2584 /* also skip 0-length msgs for bogus thresholds of 0 */
2585 if (!threshold)
2586 pr_debug("DMA buffer for addr=0x%02x with length 0 is bogus\n",
2587 msg->addr);
2588 if (msg->len < threshold || msg->len == 0)
2589 return NULL;
2590
2591 if (msg->flags & I2C_M_DMA_SAFE)
2592 return msg->buf;
2593
2594 pr_debug("using bounce buffer for addr=0x%02x, len=%d\n",
2595 msg->addr, msg->len);
2596
2597 if (msg->flags & I2C_M_RD)
2598 return kzalloc(msg->len, GFP_KERNEL);
2599 else
2600 return kmemdup(msg->buf, msg->len, GFP_KERNEL);
2601}
2602EXPORT_SYMBOL_GPL(i2c_get_dma_safe_msg_buf);
2603
2604/**
2605 * i2c_put_dma_safe_msg_buf - release DMA safe buffer and sync with i2c_msg
2606 * @buf: the buffer obtained from i2c_get_dma_safe_msg_buf(). May be NULL.
2607 * @msg: the message which the buffer corresponds to
2608 * @xferred: bool saying if the message was transferred
2609 */
2610void i2c_put_dma_safe_msg_buf(u8 *buf, struct i2c_msg *msg, bool xferred)
2611{
2612 if (!buf || buf == msg->buf)
2613 return;
2614
2615 if (xferred && msg->flags & I2C_M_RD)
2616 memcpy(msg->buf, buf, msg->len);
2617
2618 kfree(buf);
2619}
2620EXPORT_SYMBOL_GPL(i2c_put_dma_safe_msg_buf);
2621
2622MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
2623MODULE_DESCRIPTION("I2C-Bus main module");
2624MODULE_LICENSE("GPL");