Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * PowerPC version
4 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
5 *
6 * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
7 * and Cort Dougan (PReP) (cort@cs.nmt.edu)
8 * Copyright (C) 1996 Paul Mackerras
9 * PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
10 *
11 * Derived from "arch/i386/mm/init.c"
12 * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
13 */
14
15#include <linux/module.h>
16#include <linux/sched.h>
17#include <linux/kernel.h>
18#include <linux/errno.h>
19#include <linux/string.h>
20#include <linux/types.h>
21#include <linux/mm.h>
22#include <linux/stddef.h>
23#include <linux/init.h>
24#include <linux/highmem.h>
25#include <linux/initrd.h>
26#include <linux/pagemap.h>
27#include <linux/memblock.h>
28#include <linux/gfp.h>
29#include <linux/slab.h>
30#include <linux/hugetlb.h>
31
32#include <asm/io.h>
33#include <asm/mmu.h>
34#include <asm/smp.h>
35#include <asm/machdep.h>
36#include <asm/btext.h>
37#include <asm/tlb.h>
38#include <asm/sections.h>
39#include <asm/hugetlb.h>
40#include <asm/kup.h>
41#include <asm/kasan.h>
42#include <asm/fixmap.h>
43
44#include <mm/mmu_decl.h>
45
46#if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
47/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
48#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
49#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_KERNEL_START"
50#endif
51#endif
52#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
53
54phys_addr_t total_memory;
55phys_addr_t total_lowmem;
56
57#ifdef CONFIG_RELOCATABLE
58/* Used in __va()/__pa() */
59long long virt_phys_offset;
60EXPORT_SYMBOL(virt_phys_offset);
61#endif
62
63phys_addr_t lowmem_end_addr;
64
65int boot_mapsize;
66#ifdef CONFIG_PPC_PMAC
67unsigned long agp_special_page;
68EXPORT_SYMBOL(agp_special_page);
69#endif
70
71void MMU_init(void);
72
73/* max amount of low RAM to map in */
74unsigned long __max_low_memory = MAX_LOW_MEM;
75
76/*
77 * MMU_init sets up the basic memory mappings for the kernel,
78 * including both RAM and possibly some I/O regions,
79 * and sets up the page tables and the MMU hardware ready to go.
80 */
81void __init MMU_init(void)
82{
83 if (ppc_md.progress)
84 ppc_md.progress("MMU:enter", 0x111);
85
86 total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr;
87 lowmem_end_addr = memstart_addr + total_lowmem;
88
89#ifdef CONFIG_PPC_85xx
90 /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
91 * entries, so we need to adjust lowmem to match the amount we can map
92 * in the fixed entries */
93 adjust_total_lowmem();
94#endif /* CONFIG_PPC_85xx */
95
96 if (total_lowmem > __max_low_memory) {
97 total_lowmem = __max_low_memory;
98 lowmem_end_addr = memstart_addr + total_lowmem;
99#ifndef CONFIG_HIGHMEM
100 total_memory = total_lowmem;
101 memblock_enforce_memory_limit(total_lowmem);
102#endif /* CONFIG_HIGHMEM */
103 }
104
105 /* Initialize the MMU hardware */
106 if (ppc_md.progress)
107 ppc_md.progress("MMU:hw init", 0x300);
108 MMU_init_hw();
109
110 /* Map in all of RAM starting at KERNELBASE */
111 if (ppc_md.progress)
112 ppc_md.progress("MMU:mapin", 0x301);
113 mapin_ram();
114
115 /* Initialize early top-down ioremap allocator */
116 ioremap_bot = IOREMAP_TOP;
117
118 if (ppc_md.progress)
119 ppc_md.progress("MMU:exit", 0x211);
120
121 /* From now on, btext is no longer BAT mapped if it was at all */
122#ifdef CONFIG_BOOTX_TEXT
123 btext_unmap();
124#endif
125
126 kasan_mmu_init();
127
128 setup_kup();
129
130 update_mmu_feature_fixups(MMU_FTR_KUAP);
131
132 /* Shortly after that, the entire linear mapping will be available */
133 memblock_set_current_limit(lowmem_end_addr);
134}
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * PowerPC version
4 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
5 *
6 * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
7 * and Cort Dougan (PReP) (cort@cs.nmt.edu)
8 * Copyright (C) 1996 Paul Mackerras
9 * PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
10 *
11 * Derived from "arch/i386/mm/init.c"
12 * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
13 */
14
15#include <linux/module.h>
16#include <linux/sched.h>
17#include <linux/kernel.h>
18#include <linux/errno.h>
19#include <linux/string.h>
20#include <linux/types.h>
21#include <linux/mm.h>
22#include <linux/stddef.h>
23#include <linux/init.h>
24#include <linux/highmem.h>
25#include <linux/initrd.h>
26#include <linux/pagemap.h>
27#include <linux/memblock.h>
28#include <linux/gfp.h>
29#include <linux/slab.h>
30#include <linux/hugetlb.h>
31
32#include <asm/prom.h>
33#include <asm/io.h>
34#include <asm/mmu.h>
35#include <asm/smp.h>
36#include <asm/machdep.h>
37#include <asm/btext.h>
38#include <asm/tlb.h>
39#include <asm/sections.h>
40#include <asm/hugetlb.h>
41#include <asm/kup.h>
42#include <asm/kasan.h>
43
44#include <mm/mmu_decl.h>
45
46#if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
47/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
48#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
49#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_KERNEL_START"
50#endif
51#endif
52#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
53
54phys_addr_t total_memory;
55phys_addr_t total_lowmem;
56
57#ifdef CONFIG_RELOCATABLE
58/* Used in __va()/__pa() */
59long long virt_phys_offset;
60EXPORT_SYMBOL(virt_phys_offset);
61#endif
62
63phys_addr_t lowmem_end_addr;
64
65int boot_mapsize;
66#ifdef CONFIG_PPC_PMAC
67unsigned long agp_special_page;
68EXPORT_SYMBOL(agp_special_page);
69#endif
70
71void MMU_init(void);
72
73/*
74 * this tells the system to map all of ram with the segregs
75 * (i.e. page tables) instead of the bats.
76 * -- Cort
77 */
78int __map_without_bats;
79int __map_without_ltlbs;
80
81/* max amount of low RAM to map in */
82unsigned long __max_low_memory = MAX_LOW_MEM;
83
84/*
85 * Check for command-line options that affect what MMU_init will do.
86 */
87static void __init MMU_setup(void)
88{
89 /* Check for nobats option (used in mapin_ram). */
90 if (strstr(boot_command_line, "nobats")) {
91 __map_without_bats = 1;
92 }
93
94 if (strstr(boot_command_line, "noltlbs")) {
95 __map_without_ltlbs = 1;
96 }
97 if (IS_ENABLED(CONFIG_PPC_8xx))
98 return;
99
100 if (IS_ENABLED(CONFIG_KFENCE))
101 __map_without_ltlbs = 1;
102
103 if (debug_pagealloc_enabled())
104 __map_without_ltlbs = 1;
105
106 if (strict_kernel_rwx_enabled())
107 __map_without_ltlbs = 1;
108}
109
110/*
111 * MMU_init sets up the basic memory mappings for the kernel,
112 * including both RAM and possibly some I/O regions,
113 * and sets up the page tables and the MMU hardware ready to go.
114 */
115void __init MMU_init(void)
116{
117 if (ppc_md.progress)
118 ppc_md.progress("MMU:enter", 0x111);
119
120 /* parse args from command line */
121 MMU_setup();
122
123 /*
124 * Reserve gigantic pages for hugetlb. This MUST occur before
125 * lowmem_end_addr is initialized below.
126 */
127 if (memblock.memory.cnt > 1) {
128#ifndef CONFIG_WII
129 memblock_enforce_memory_limit(memblock.memory.regions[0].size);
130 pr_warn("Only using first contiguous memory region\n");
131#else
132 wii_memory_fixups();
133#endif
134 }
135
136 total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr;
137 lowmem_end_addr = memstart_addr + total_lowmem;
138
139#ifdef CONFIG_FSL_BOOKE
140 /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
141 * entries, so we need to adjust lowmem to match the amount we can map
142 * in the fixed entries */
143 adjust_total_lowmem();
144#endif /* CONFIG_FSL_BOOKE */
145
146 if (total_lowmem > __max_low_memory) {
147 total_lowmem = __max_low_memory;
148 lowmem_end_addr = memstart_addr + total_lowmem;
149#ifndef CONFIG_HIGHMEM
150 total_memory = total_lowmem;
151 memblock_enforce_memory_limit(total_lowmem);
152#endif /* CONFIG_HIGHMEM */
153 }
154
155 /* Initialize the MMU hardware */
156 if (ppc_md.progress)
157 ppc_md.progress("MMU:hw init", 0x300);
158 MMU_init_hw();
159
160 /* Map in all of RAM starting at KERNELBASE */
161 if (ppc_md.progress)
162 ppc_md.progress("MMU:mapin", 0x301);
163 mapin_ram();
164
165 /* Initialize early top-down ioremap allocator */
166 ioremap_bot = IOREMAP_TOP;
167
168 if (ppc_md.progress)
169 ppc_md.progress("MMU:exit", 0x211);
170
171 /* From now on, btext is no longer BAT mapped if it was at all */
172#ifdef CONFIG_BOOTX_TEXT
173 btext_unmap();
174#endif
175
176 kasan_mmu_init();
177
178 setup_kup();
179
180 /* Shortly after that, the entire linear mapping will be available */
181 memblock_set_current_limit(lowmem_end_addr);
182}