1# SPDX-License-Identifier: GPL-2.0
  2#
  3# USB Dual Role (OTG-ready) Controller Drivers
  4# for silicon based on Mentor Graphics INVENTRA designs
  5#
  6
  7# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
  8config USB_MUSB_HDRC
  9	tristate 'Inventra Highspeed Dual Role Controller'
 10	depends on (USB || USB_GADGET)
 11	depends on HAS_IOMEM
 12	help
 13	  Say Y here if your system has a dual role high speed USB
 14	  controller based on the Mentor Graphics silicon IP.  Then
 15	  configure options to match your silicon and the board
 16	  it's being used with, including the USB peripheral role,
 17	  or the USB host role, or both.
 18
 19	  Texas Instruments families using this IP include DaVinci
 20	  (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
 21
 
 
 
 22	  Allwinner SoCs using this IP include A10, A13, A20, ...
 23
 24	  If you do not know what this is, please say N.
 25
 26	  To compile this driver as a module, choose M here; the
 27	  module will be called "musb-hdrc".
 28
 29if USB_MUSB_HDRC
 30
 31choice
 32	bool "MUSB Mode Selection"
 33	default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET)
 34	default USB_MUSB_HOST if (USB && !USB_GADGET)
 35	default USB_MUSB_GADGET if (!USB && USB_GADGET)
 36
 37config USB_MUSB_HOST
 38	bool "Host only mode"
 39	depends on USB=y || USB=USB_MUSB_HDRC
 40	help
 41	  Select this when you want to use MUSB in host mode only,
 42	  thereby the gadget feature will be regressed.
 43
 44config USB_MUSB_GADGET
 45	bool "Gadget only mode"
 46	depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
 47	depends on HAS_DMA
 48	help
 49	  Select this when you want to use MUSB in gadget mode only,
 50	  thereby the host feature will be regressed.
 51
 52config USB_MUSB_DUAL_ROLE
 53	bool "Dual Role mode"
 54	depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
 55	depends on HAS_DMA
 56	help
 57	  This is the default mode of working of MUSB controller where
 58	  both host and gadget features are enabled.
 59
 60endchoice
 61
 62comment "Platform Glue Layer"
 63
 64config USB_MUSB_SUNXI
 65	tristate "Allwinner (sunxi)"
 66	depends on ARCH_SUNXI
 67	depends on NOP_USB_XCEIV
 68	depends on PHY_SUN4I_USB
 69	depends on EXTCON
 70	select GENERIC_PHY
 71	select SUNXI_SRAM
 72
 
 
 
 
 
 
 73config USB_MUSB_DA8XX
 74	tristate "DA8xx/OMAP-L1x"
 75	depends on ARCH_DAVINCI_DA8XX
 76	depends on NOP_USB_XCEIV
 77	select PHY_DA8XX_USB
 78
 79config USB_MUSB_TUSB6010
 80	tristate "TUSB6010"
 81	depends on HAS_IOMEM
 82	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 83	depends on NOP_USB_XCEIV!=m || USB_MUSB_HDRC=m
 84
 85config USB_MUSB_OMAP2PLUS
 86	tristate "OMAP2430 and onwards"
 87	depends on ARCH_OMAP2PLUS && USB
 88	depends on OMAP_CONTROL_PHY || !OMAP_CONTROL_PHY
 89	select GENERIC_PHY
 90
 
 
 
 
 
 91config USB_MUSB_DSPS
 92	tristate "TI DSPS platforms"
 
 93	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 94	depends on OF_IRQ
 95
 
 
 
 
 
 96config USB_MUSB_UX500
 97	tristate "Ux500 platforms"
 98	depends on ARCH_U8500 || COMPILE_TEST
 99
100config USB_MUSB_JZ4740
101	tristate "JZ4740"
102	depends on OF
103	depends on MIPS || COMPILE_TEST
104	depends on USB_MUSB_GADGET
105	select USB_ROLE_SWITCH
106
107config USB_MUSB_MEDIATEK
108	tristate "MediaTek platforms"
109	depends on ARCH_MEDIATEK || COMPILE_TEST
110	depends on NOP_USB_XCEIV
111	select GENERIC_PHY
112	select USB_ROLE_SWITCH
113
114config USB_MUSB_POLARFIRE_SOC
115	tristate "Microchip PolarFire SoC platforms"
116	depends on ARCH_MICROCHIP_POLARFIRE || COMPILE_TEST
117	depends on NOP_USB_XCEIV
118	select USB_MUSB_DUAL_ROLE
119	help
120	  Say Y here to enable support for USB on Microchip's PolarFire SoC.
121
122	  This support is also available as a module.  If so, the module
123	  will be called mpfs.
124
125comment "MUSB DMA mode"
126
127config MUSB_PIO_ONLY
128	bool 'Disable DMA (always use PIO)'
129	help
130	  All data is copied between memory and FIFO by the CPU.
131	  DMA controllers are ignored.
132
133	  Do not choose this unless DMA support for your SOC or board
134	  is unavailable (or unstable).  When DMA is enabled at compile time,
135	  you can still disable it at run time using the "use_dma=n" module
136	  parameter.
137
138if !MUSB_PIO_ONLY
139
140config USB_UX500_DMA
141	bool 'ST Ericsson Ux500'
142	depends on USB_MUSB_UX500
143	help
144	  Enable DMA transfers on UX500 platforms.
145
146config USB_INVENTRA_DMA
147	bool 'Inventra'
148	depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK || USB_MUSB_JZ4740 || USB_MUSB_POLARFIRE_SOC
149	help
150	  Enable DMA transfers using Mentor's engine.
151
 
 
 
 
 
 
152config USB_TI_CPPI41_DMA
153	bool 'TI CPPI 4.1'
154	depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX) && DMADEVICES
155	select TI_CPPI41
156
157config USB_TUSB_OMAP_DMA
158	bool 'TUSB 6010'
159	depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules
160	depends on ARCH_OMAP
161	help
162	  Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
163
164endif # !MUSB_PIO_ONLY
165
166endif # USB_MUSB_HDRC

 
  1#
  2# USB Dual Role (OTG-ready) Controller Drivers
  3# for silicon based on Mentor Graphics INVENTRA designs
  4#
  5
  6# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
  7config USB_MUSB_HDRC
  8	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, AW, ...)'
  9	depends on (USB || USB_GADGET)
 10	depends on HAS_IOMEM
 11	help
 12	  Say Y here if your system has a dual role high speed USB
 13	  controller based on the Mentor Graphics silicon IP.  Then
 14	  configure options to match your silicon and the board
 15	  it's being used with, including the USB peripheral role,
 16	  or the USB host role, or both.
 17
 18	  Texas Instruments families using this IP include DaVinci
 19	  (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
 20
 21	  Analog Devices parts using this IP include Blackfin BF54x,
 22	  BF525 and BF527.
 23
 24	  Allwinner SoCs using this IP include A10, A13, A20, ...
 25
 26	  If you do not know what this is, please say N.
 27
 28	  To compile this driver as a module, choose M here; the
 29	  module will be called "musb-hdrc".
 30
 31if USB_MUSB_HDRC
 32
 33choice
 34	bool "MUSB Mode Selection"
 35	default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET)
 36	default USB_MUSB_HOST if (USB && !USB_GADGET)
 37	default USB_MUSB_GADGET if (!USB && USB_GADGET)
 38
 39config USB_MUSB_HOST
 40	bool "Host only mode"
 41	depends on USB=y || USB=USB_MUSB_HDRC
 42	help
 43	  Select this when you want to use MUSB in host mode only,
 44	  thereby the gadget feature will be regressed.
 45
 46config USB_MUSB_GADGET
 47	bool "Gadget only mode"
 48	depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
 49	depends on HAS_DMA
 50	help
 51	  Select this when you want to use MUSB in gadget mode only,
 52	  thereby the host feature will be regressed.
 53
 54config USB_MUSB_DUAL_ROLE
 55	bool "Dual Role mode"
 56	depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
 57	depends on HAS_DMA
 58	help
 59	  This is the default mode of working of MUSB controller where
 60	  both host and gadget features are enabled.
 61
 62endchoice
 63
 64comment "Platform Glue Layer"
 65
 66config USB_MUSB_SUNXI
 67	tristate "Allwinner (sunxi)"
 68	depends on ARCH_SUNXI
 69	depends on NOP_USB_XCEIV
 70	depends on PHY_SUN4I_USB
 71	depends on EXTCON
 72	depends on GENERIC_PHY
 73	select SUNXI_SRAM
 74
 75config USB_MUSB_DAVINCI
 76	tristate "DaVinci"
 77	depends on ARCH_DAVINCI_DMx
 78	depends on NOP_USB_XCEIV
 79	depends on BROKEN
 80
 81config USB_MUSB_DA8XX
 82	tristate "DA8xx/OMAP-L1x"
 83	depends on ARCH_DAVINCI_DA8XX
 84	depends on NOP_USB_XCEIV
 85	depends on BROKEN
 86
 87config USB_MUSB_TUSB6010
 88	tristate "TUSB6010"
 89	depends on HAS_IOMEM
 90	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 91	depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
 92
 93config USB_MUSB_OMAP2PLUS
 94	tristate "OMAP2430 and onwards"
 95	depends on ARCH_OMAP2PLUS && USB
 96	depends on OMAP_CONTROL_PHY || !OMAP_CONTROL_PHY
 97	select GENERIC_PHY
 98
 99config USB_MUSB_AM35X
100	tristate "AM35x"
101	depends on ARCH_OMAP
102	depends on NOP_USB_XCEIV
103
104config USB_MUSB_DSPS
105	tristate "TI DSPS platforms"
106	select USB_MUSB_AM335X_CHILD
107	depends on ARCH_OMAP2PLUS || COMPILE_TEST
108	depends on OF_IRQ
109
110config USB_MUSB_BLACKFIN
111	tristate "Blackfin"
112	depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
113	depends on NOP_USB_XCEIV
114
115config USB_MUSB_UX500
116	tristate "Ux500 platforms"
117	depends on ARCH_U8500 || COMPILE_TEST
118
119config USB_MUSB_JZ4740
120	tristate "JZ4740"
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
121	depends on NOP_USB_XCEIV
122	depends on MACH_JZ4740 || COMPILE_TEST
123	depends on USB_MUSB_GADGET
124	depends on USB_OTG_BLACKLIST_HUB
125
126config USB_MUSB_AM335X_CHILD
127	tristate
128
129comment "MUSB DMA mode"
130
131config MUSB_PIO_ONLY
132	bool 'Disable DMA (always use PIO)'
133	help
134	  All data is copied between memory and FIFO by the CPU.
135	  DMA controllers are ignored.
136
137	  Do not choose this unless DMA support for your SOC or board
138	  is unavailable (or unstable).  When DMA is enabled at compile time,
139	  you can still disable it at run time using the "use_dma=n" module
140	  parameter.
141
142if !MUSB_PIO_ONLY
143
144config USB_UX500_DMA
145	bool 'ST Ericsson Ux500'
146	depends on USB_MUSB_UX500
147	help
148	  Enable DMA transfers on UX500 platforms.
149
150config USB_INVENTRA_DMA
151	bool 'Inventra'
152	depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
153	help
154	  Enable DMA transfers using Mentor's engine.
155
156config USB_TI_CPPI_DMA
157	bool 'TI CPPI (Davinci)'
158	depends on USB_MUSB_DAVINCI
159	help
160	  Enable DMA transfers when TI CPPI DMA is available.
161
162config USB_TI_CPPI41_DMA
163	bool 'TI CPPI 4.1 (AM335x)'
164	depends on ARCH_OMAP && DMADEVICES
165	select TI_CPPI41
166
167config USB_TUSB_OMAP_DMA
168	bool 'TUSB 6010'
169	depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules
170	depends on ARCH_OMAP
171	help
172	  Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
173
174endif # !MUSB_PIO_ONLY
175
176endif # USB_MUSB_HDRC