Linux Audio

Check our new training course

Loading...
v6.8
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * drivers/usb/host/ehci-orion.c
  4 *
  5 * Tzachi Perelstein <tzachi@marvell.com>
 
 
 
 
  6 */
  7
  8#include <linux/kernel.h>
  9#include <linux/module.h>
 10#include <linux/platform_device.h>
 11#include <linux/mbus.h>
 12#include <linux/clk.h>
 13#include <linux/platform_data/usb-ehci-orion.h>
 14#include <linux/of.h>
 15#include <linux/phy/phy.h>
 
 
 16#include <linux/usb.h>
 17#include <linux/usb/hcd.h>
 18#include <linux/io.h>
 19#include <linux/dma-mapping.h>
 20
 21#include "ehci.h"
 22
 23#define rdl(off)	readl_relaxed(hcd->regs + (off))
 24#define wrl(off, val)	writel_relaxed((val), hcd->regs + (off))
 25
 26#define USB_CMD			0x140
 27#define   USB_CMD_RUN		BIT(0)
 28#define   USB_CMD_RESET		BIT(1)
 29#define USB_MODE		0x1a8
 30#define   USB_MODE_MASK		GENMASK(1, 0)
 31#define   USB_MODE_DEVICE	0x2
 32#define   USB_MODE_HOST		0x3
 33#define   USB_MODE_SDIS		BIT(4)
 34#define USB_CAUSE		0x310
 35#define USB_MASK		0x314
 36#define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
 37#define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
 38#define USB_IPG			0x360
 39#define USB_PHY_PWR_CTRL	0x400
 40#define USB_PHY_TX_CTRL		0x420
 41#define USB_PHY_RX_CTRL		0x430
 42#define USB_PHY_IVREF_CTRL	0x440
 43#define USB_PHY_TST_GRP_CTRL	0x450
 44
 45#define USB_SBUSCFG		0x90
 46
 47/* BAWR = BARD = 3 : Align read/write bursts packets larger than 128 bytes */
 48#define USB_SBUSCFG_BAWR_ALIGN_128B	(0x3 << 6)
 49#define USB_SBUSCFG_BARD_ALIGN_128B	(0x3 << 3)
 50/* AHBBRST = 3	   : Align AHB Burst to INCR16 (64 bytes) */
 51#define USB_SBUSCFG_AHBBRST_INCR16	(0x3 << 0)
 52
 53#define USB_SBUSCFG_DEF_VAL (USB_SBUSCFG_BAWR_ALIGN_128B	\
 54			     | USB_SBUSCFG_BARD_ALIGN_128B	\
 55			     | USB_SBUSCFG_AHBBRST_INCR16)
 56
 57#define DRIVER_DESC "EHCI orion driver"
 58
 59#define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv)
 60
 61struct orion_ehci_hcd {
 62	struct clk *clk;
 63	struct phy *phy;
 64};
 65
 
 
 66static struct hc_driver __read_mostly ehci_orion_hc_driver;
 67
 68/*
 69 * Implement Orion USB controller specification guidelines
 70 */
 71static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
 72{
 73	/* The below GLs are according to the Orion Errata document */
 74	/*
 75	 * Clear interrupt cause and mask
 76	 */
 77	wrl(USB_CAUSE, 0);
 78	wrl(USB_MASK, 0);
 79
 80	/*
 81	 * Reset controller
 82	 */
 83	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
 84	while (rdl(USB_CMD) & USB_CMD_RESET);
 85
 86	/*
 87	 * GL# USB-10: Set IPG for non start of frame packets
 88	 * Bits[14:8]=0xc
 89	 */
 90	wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
 91
 92	/*
 93	 * GL# USB-9: USB 2.0 Power Control
 94	 * BG_VSEL[7:6]=0x1
 95	 */
 96	wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
 97
 98	/*
 99	 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
100	 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
101	 */
102	wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
103
104	/*
105	 * GL# USB-3 GL# USB-9: USB PHY Rx Control
106	 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
107	 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
108	 */
109	wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
110
111	/*
112	 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
113	 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
114	 */
115	wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
116
117	/*
118	 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
119	 * REG_FIFO_SQ_RST[15]=0
120	 */
121	wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
122
123	/*
124	 * Stop and reset controller
125	 */
126	wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN);
127	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
128	while (rdl(USB_CMD) & USB_CMD_RESET);
129
130	/*
131	 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
132	 * TBD: This need to be done after each reset!
133	 * GL# USB-4 Setup USB Host mode
134	 */
135	wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST);
136}
137
138static void
139ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
140			     const struct mbus_dram_target_info *dram)
141{
142	int i;
143
144	for (i = 0; i < 4; i++) {
145		wrl(USB_WINDOW_CTRL(i), 0);
146		wrl(USB_WINDOW_BASE(i), 0);
147	}
148
149	for (i = 0; i < dram->num_cs; i++) {
150		const struct mbus_dram_window *cs = dram->cs + i;
151
152		wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
153					(cs->mbus_attr << 8) |
154					(dram->mbus_dram_target_id << 4) | 1);
155		wrl(USB_WINDOW_BASE(i), cs->base);
156	}
157}
158
159static int ehci_orion_drv_reset(struct usb_hcd *hcd)
160{
161	struct device *dev = hcd->self.controller;
162	int ret;
163
164	ret = ehci_setup(hcd);
165	if (ret)
166		return ret;
167
168	/*
169	 * For SoC without hlock, need to program sbuscfg value to guarantee
170	 * AHB master's burst would not overrun or underrun FIFO.
171	 *
172	 * sbuscfg reg has to be set after usb controller reset, otherwise
173	 * the value would be override to 0.
174	 */
175	if (of_device_is_compatible(dev->of_node, "marvell,armada-3700-ehci"))
176		wrl(USB_SBUSCFG, USB_SBUSCFG_DEF_VAL);
177
178	return ret;
179}
180
181static int __maybe_unused ehci_orion_drv_suspend(struct device *dev)
182{
183	struct usb_hcd *hcd = dev_get_drvdata(dev);
184
185	return ehci_suspend(hcd, device_may_wakeup(dev));
186}
187
188static int __maybe_unused ehci_orion_drv_resume(struct device *dev)
189{
190	struct usb_hcd *hcd = dev_get_drvdata(dev);
191
192	return ehci_resume(hcd, false);
193}
194
195static SIMPLE_DEV_PM_OPS(ehci_orion_pm_ops, ehci_orion_drv_suspend,
196			 ehci_orion_drv_resume);
197
198static const struct ehci_driver_overrides orion_overrides __initconst = {
199	.extra_priv_size =	sizeof(struct orion_ehci_hcd),
200	.reset = ehci_orion_drv_reset,
201};
202
203static int ehci_orion_drv_probe(struct platform_device *pdev)
204{
205	struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev);
206	const struct mbus_dram_target_info *dram;
207	struct resource *res;
208	struct usb_hcd *hcd;
209	struct ehci_hcd *ehci;
210	void __iomem *regs;
211	int irq, err;
212	enum orion_ehci_phy_ver phy_version;
213	struct orion_ehci_hcd *priv;
214
215	if (usb_disabled())
216		return -ENODEV;
217
218	pr_debug("Initializing Orion-SoC USB Host Controller\n");
219
220	irq = platform_get_irq(pdev, 0);
221	if (irq < 0) {
222		err = irq;
 
 
 
223		goto err;
224	}
225
226	/*
227	 * Right now device-tree probed devices don't get dma_mask
228	 * set. Since shared usb code relies on it, set it here for
229	 * now. Once we have dma capability bindings this can go away.
230	 */
231	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
232	if (err)
233		goto err;
234
235	regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 
236	if (IS_ERR(regs)) {
237		err = PTR_ERR(regs);
238		goto err;
239	}
240
241	hcd = usb_create_hcd(&ehci_orion_hc_driver,
242			&pdev->dev, dev_name(&pdev->dev));
243	if (!hcd) {
244		err = -ENOMEM;
245		goto err;
246	}
247
248	hcd->rsrc_start = res->start;
249	hcd->rsrc_len = resource_size(res);
250	hcd->regs = regs;
251
252	ehci = hcd_to_ehci(hcd);
253	ehci->caps = hcd->regs + 0x100;
254	hcd->has_tt = 1;
255
256	priv = hcd_to_orion_priv(hcd);
257	/*
258	 * Not all platforms can gate the clock, so it is not an error if
259	 * the clock does not exists.
260	 */
261	priv->clk = devm_clk_get(&pdev->dev, NULL);
262	if (!IS_ERR(priv->clk)) {
263		err = clk_prepare_enable(priv->clk);
264		if (err)
265			goto err_put_hcd;
266	}
267
268	priv->phy = devm_phy_optional_get(&pdev->dev, "usb");
269	if (IS_ERR(priv->phy)) {
270		err = PTR_ERR(priv->phy);
271		if (err != -ENOSYS)
272			goto err_dis_clk;
 
 
 
 
 
 
 
 
273	}
274
275	/*
276	 * (Re-)program MBUS remapping windows if we are asked to.
277	 */
278	dram = mv_mbus_dram_info();
279	if (dram)
280		ehci_orion_conf_mbus_windows(hcd, dram);
281
282	/*
283	 * setup Orion USB controller.
284	 */
285	if (pdev->dev.of_node)
286		phy_version = EHCI_PHY_NA;
287	else
288		phy_version = pd->phy_version;
289
290	switch (phy_version) {
291	case EHCI_PHY_NA:	/* dont change USB phy settings */
292		break;
293	case EHCI_PHY_ORION:
294		orion_usb_phy_v1_setup(hcd);
295		break;
296	case EHCI_PHY_DD:
297	case EHCI_PHY_KW:
298	default:
299		dev_warn(&pdev->dev, "USB phy version isn't supported.\n");
300	}
301
302	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
303	if (err)
304		goto err_dis_clk;
305
306	device_wakeup_enable(hcd->self.controller);
307	return 0;
308
309err_dis_clk:
 
 
 
 
 
 
 
310	if (!IS_ERR(priv->clk))
311		clk_disable_unprepare(priv->clk);
312err_put_hcd:
313	usb_put_hcd(hcd);
314err:
315	dev_err(&pdev->dev, "init %s fail, %d\n",
316		dev_name(&pdev->dev), err);
317
318	return err;
319}
320
321static void ehci_orion_drv_remove(struct platform_device *pdev)
322{
323	struct usb_hcd *hcd = platform_get_drvdata(pdev);
324	struct orion_ehci_hcd *priv = hcd_to_orion_priv(hcd);
325
326	usb_remove_hcd(hcd);
327
 
 
 
 
 
328	if (!IS_ERR(priv->clk))
329		clk_disable_unprepare(priv->clk);
330
331	usb_put_hcd(hcd);
 
 
332}
333
334static const struct of_device_id ehci_orion_dt_ids[] = {
335	{ .compatible = "marvell,orion-ehci", },
336	{ .compatible = "marvell,armada-3700-ehci", },
337	{},
338};
339MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
340
341static struct platform_driver ehci_orion_driver = {
342	.probe		= ehci_orion_drv_probe,
343	.remove_new	= ehci_orion_drv_remove,
344	.shutdown	= usb_hcd_platform_shutdown,
345	.driver = {
346		.name	= "orion-ehci",
347		.of_match_table = ehci_orion_dt_ids,
348		.pm = &ehci_orion_pm_ops,
349	},
350};
351
352static int __init ehci_orion_init(void)
353{
354	if (usb_disabled())
355		return -ENODEV;
 
 
356
357	ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides);
358	return platform_driver_register(&ehci_orion_driver);
359}
360module_init(ehci_orion_init);
361
362static void __exit ehci_orion_cleanup(void)
363{
364	platform_driver_unregister(&ehci_orion_driver);
365}
366module_exit(ehci_orion_cleanup);
367
368MODULE_DESCRIPTION(DRIVER_DESC);
369MODULE_ALIAS("platform:orion-ehci");
370MODULE_AUTHOR("Tzachi Perelstein");
371MODULE_LICENSE("GPL v2");
v4.6
 
  1/*
  2 * drivers/usb/host/ehci-orion.c
  3 *
  4 * Tzachi Perelstein <tzachi@marvell.com>
  5 *
  6 * This file is licensed under  the terms of the GNU General Public
  7 * License version 2. This program is licensed "as is" without any
  8 * warranty of any kind, whether express or implied.
  9 */
 10
 11#include <linux/kernel.h>
 12#include <linux/module.h>
 13#include <linux/platform_device.h>
 14#include <linux/mbus.h>
 15#include <linux/clk.h>
 16#include <linux/platform_data/usb-ehci-orion.h>
 17#include <linux/of.h>
 18#include <linux/phy/phy.h>
 19#include <linux/of_device.h>
 20#include <linux/of_irq.h>
 21#include <linux/usb.h>
 22#include <linux/usb/hcd.h>
 23#include <linux/io.h>
 24#include <linux/dma-mapping.h>
 25
 26#include "ehci.h"
 27
 28#define rdl(off)	readl_relaxed(hcd->regs + (off))
 29#define wrl(off, val)	writel_relaxed((val), hcd->regs + (off))
 30
 31#define USB_CMD			0x140
 32#define   USB_CMD_RUN		BIT(0)
 33#define   USB_CMD_RESET		BIT(1)
 34#define USB_MODE		0x1a8
 35#define   USB_MODE_MASK		GENMASK(1, 0)
 36#define   USB_MODE_DEVICE	0x2
 37#define   USB_MODE_HOST		0x3
 38#define   USB_MODE_SDIS		BIT(4)
 39#define USB_CAUSE		0x310
 40#define USB_MASK		0x314
 41#define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
 42#define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
 43#define USB_IPG			0x360
 44#define USB_PHY_PWR_CTRL	0x400
 45#define USB_PHY_TX_CTRL		0x420
 46#define USB_PHY_RX_CTRL		0x430
 47#define USB_PHY_IVREF_CTRL	0x440
 48#define USB_PHY_TST_GRP_CTRL	0x450
 49
 
 
 
 
 
 
 
 
 
 
 
 
 50#define DRIVER_DESC "EHCI orion driver"
 51
 52#define hcd_to_orion_priv(h) ((struct orion_ehci_hcd *)hcd_to_ehci(h)->priv)
 53
 54struct orion_ehci_hcd {
 55	struct clk *clk;
 56	struct phy *phy;
 57};
 58
 59static const char hcd_name[] = "ehci-orion";
 60
 61static struct hc_driver __read_mostly ehci_orion_hc_driver;
 62
 63/*
 64 * Implement Orion USB controller specification guidelines
 65 */
 66static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
 67{
 68	/* The below GLs are according to the Orion Errata document */
 69	/*
 70	 * Clear interrupt cause and mask
 71	 */
 72	wrl(USB_CAUSE, 0);
 73	wrl(USB_MASK, 0);
 74
 75	/*
 76	 * Reset controller
 77	 */
 78	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
 79	while (rdl(USB_CMD) & USB_CMD_RESET);
 80
 81	/*
 82	 * GL# USB-10: Set IPG for non start of frame packets
 83	 * Bits[14:8]=0xc
 84	 */
 85	wrl(USB_IPG, (rdl(USB_IPG) & ~0x7f00) | 0xc00);
 86
 87	/*
 88	 * GL# USB-9: USB 2.0 Power Control
 89	 * BG_VSEL[7:6]=0x1
 90	 */
 91	wrl(USB_PHY_PWR_CTRL, (rdl(USB_PHY_PWR_CTRL) & ~0xc0)| 0x40);
 92
 93	/*
 94	 * GL# USB-1: USB PHY Tx Control - force calibration to '8'
 95	 * TXDATA_BLOCK_EN[21]=0x1, EXT_RCAL_EN[13]=0x1, IMP_CAL[6:3]=0x8
 96	 */
 97	wrl(USB_PHY_TX_CTRL, (rdl(USB_PHY_TX_CTRL) & ~0x78) | 0x202040);
 98
 99	/*
100	 * GL# USB-3 GL# USB-9: USB PHY Rx Control
101	 * RXDATA_BLOCK_LENGHT[31:30]=0x3, EDGE_DET_SEL[27:26]=0,
102	 * CDR_FASTLOCK_EN[21]=0, DISCON_THRESHOLD[9:8]=0, SQ_THRESH[7:4]=0x1
103	 */
104	wrl(USB_PHY_RX_CTRL, (rdl(USB_PHY_RX_CTRL) & ~0xc2003f0) | 0xc0000010);
105
106	/*
107	 * GL# USB-3 GL# USB-9: USB PHY IVREF Control
108	 * PLLVDD12[1:0]=0x2, RXVDD[5:4]=0x3, Reserved[19]=0
109	 */
110	wrl(USB_PHY_IVREF_CTRL, (rdl(USB_PHY_IVREF_CTRL) & ~0x80003 ) | 0x32);
111
112	/*
113	 * GL# USB-3 GL# USB-9: USB PHY Test Group Control
114	 * REG_FIFO_SQ_RST[15]=0
115	 */
116	wrl(USB_PHY_TST_GRP_CTRL, rdl(USB_PHY_TST_GRP_CTRL) & ~0x8000);
117
118	/*
119	 * Stop and reset controller
120	 */
121	wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN);
122	wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET);
123	while (rdl(USB_CMD) & USB_CMD_RESET);
124
125	/*
126	 * GL# USB-5 Streaming disable REG_USB_MODE[4]=1
127	 * TBD: This need to be done after each reset!
128	 * GL# USB-4 Setup USB Host mode
129	 */
130	wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST);
131}
132
133static void
134ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
135			     const struct mbus_dram_target_info *dram)
136{
137	int i;
138
139	for (i = 0; i < 4; i++) {
140		wrl(USB_WINDOW_CTRL(i), 0);
141		wrl(USB_WINDOW_BASE(i), 0);
142	}
143
144	for (i = 0; i < dram->num_cs; i++) {
145		const struct mbus_dram_window *cs = dram->cs + i;
146
147		wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
148					(cs->mbus_attr << 8) |
149					(dram->mbus_dram_target_id << 4) | 1);
150		wrl(USB_WINDOW_BASE(i), cs->base);
151	}
152}
153
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
154static const struct ehci_driver_overrides orion_overrides __initconst = {
155	.extra_priv_size =	sizeof(struct orion_ehci_hcd),
 
156};
157
158static int ehci_orion_drv_probe(struct platform_device *pdev)
159{
160	struct orion_ehci_data *pd = dev_get_platdata(&pdev->dev);
161	const struct mbus_dram_target_info *dram;
162	struct resource *res;
163	struct usb_hcd *hcd;
164	struct ehci_hcd *ehci;
165	void __iomem *regs;
166	int irq, err;
167	enum orion_ehci_phy_ver phy_version;
168	struct orion_ehci_hcd *priv;
169
170	if (usb_disabled())
171		return -ENODEV;
172
173	pr_debug("Initializing Orion-SoC USB Host Controller\n");
174
175	irq = platform_get_irq(pdev, 0);
176	if (irq <= 0) {
177		dev_err(&pdev->dev,
178			"Found HC with no IRQ. Check %s setup!\n",
179			dev_name(&pdev->dev));
180		err = -ENODEV;
181		goto err;
182	}
183
184	/*
185	 * Right now device-tree probed devices don't get dma_mask
186	 * set. Since shared usb code relies on it, set it here for
187	 * now. Once we have dma capability bindings this can go away.
188	 */
189	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
190	if (err)
191		goto err;
192
193	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
194	regs = devm_ioremap_resource(&pdev->dev, res);
195	if (IS_ERR(regs)) {
196		err = PTR_ERR(regs);
197		goto err;
198	}
199
200	hcd = usb_create_hcd(&ehci_orion_hc_driver,
201			&pdev->dev, dev_name(&pdev->dev));
202	if (!hcd) {
203		err = -ENOMEM;
204		goto err;
205	}
206
207	hcd->rsrc_start = res->start;
208	hcd->rsrc_len = resource_size(res);
209	hcd->regs = regs;
210
211	ehci = hcd_to_ehci(hcd);
212	ehci->caps = hcd->regs + 0x100;
213	hcd->has_tt = 1;
214
215	priv = hcd_to_orion_priv(hcd);
216	/*
217	 * Not all platforms can gate the clock, so it is not an error if
218	 * the clock does not exists.
219	 */
220	priv->clk = devm_clk_get(&pdev->dev, NULL);
221	if (!IS_ERR(priv->clk))
222		clk_prepare_enable(priv->clk);
 
 
 
223
224	priv->phy = devm_phy_optional_get(&pdev->dev, "usb");
225	if (IS_ERR(priv->phy)) {
226		err = PTR_ERR(priv->phy);
227		if (err != -ENOSYS)
228			goto err_phy_get;
229	} else {
230		err = phy_init(priv->phy);
231		if (err)
232			goto err_phy_init;
233
234		err = phy_power_on(priv->phy);
235		if (err)
236			goto err_phy_power_on;
237	}
238
239	/*
240	 * (Re-)program MBUS remapping windows if we are asked to.
241	 */
242	dram = mv_mbus_dram_info();
243	if (dram)
244		ehci_orion_conf_mbus_windows(hcd, dram);
245
246	/*
247	 * setup Orion USB controller.
248	 */
249	if (pdev->dev.of_node)
250		phy_version = EHCI_PHY_NA;
251	else
252		phy_version = pd->phy_version;
253
254	switch (phy_version) {
255	case EHCI_PHY_NA:	/* dont change USB phy settings */
256		break;
257	case EHCI_PHY_ORION:
258		orion_usb_phy_v1_setup(hcd);
259		break;
260	case EHCI_PHY_DD:
261	case EHCI_PHY_KW:
262	default:
263		dev_warn(&pdev->dev, "USB phy version isn't supported.\n");
264	}
265
266	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
267	if (err)
268		goto err_add_hcd;
269
270	device_wakeup_enable(hcd->self.controller);
271	return 0;
272
273err_add_hcd:
274	if (!IS_ERR(priv->phy))
275		phy_power_off(priv->phy);
276err_phy_power_on:
277	if (!IS_ERR(priv->phy))
278		phy_exit(priv->phy);
279err_phy_init:
280err_phy_get:
281	if (!IS_ERR(priv->clk))
282		clk_disable_unprepare(priv->clk);
 
283	usb_put_hcd(hcd);
284err:
285	dev_err(&pdev->dev, "init %s fail, %d\n",
286		dev_name(&pdev->dev), err);
287
288	return err;
289}
290
291static int ehci_orion_drv_remove(struct platform_device *pdev)
292{
293	struct usb_hcd *hcd = platform_get_drvdata(pdev);
294	struct orion_ehci_hcd *priv = hcd_to_orion_priv(hcd);
295
296	usb_remove_hcd(hcd);
297
298	if (!IS_ERR(priv->phy)) {
299		phy_power_off(priv->phy);
300		phy_exit(priv->phy);
301	}
302
303	if (!IS_ERR(priv->clk))
304		clk_disable_unprepare(priv->clk);
305
306	usb_put_hcd(hcd);
307
308	return 0;
309}
310
311static const struct of_device_id ehci_orion_dt_ids[] = {
312	{ .compatible = "marvell,orion-ehci", },
 
313	{},
314};
315MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
316
317static struct platform_driver ehci_orion_driver = {
318	.probe		= ehci_orion_drv_probe,
319	.remove		= ehci_orion_drv_remove,
320	.shutdown	= usb_hcd_platform_shutdown,
321	.driver = {
322		.name	= "orion-ehci",
323		.of_match_table = ehci_orion_dt_ids,
 
324	},
325};
326
327static int __init ehci_orion_init(void)
328{
329	if (usb_disabled())
330		return -ENODEV;
331
332	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
333
334	ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides);
335	return platform_driver_register(&ehci_orion_driver);
336}
337module_init(ehci_orion_init);
338
339static void __exit ehci_orion_cleanup(void)
340{
341	platform_driver_unregister(&ehci_orion_driver);
342}
343module_exit(ehci_orion_cleanup);
344
345MODULE_DESCRIPTION(DRIVER_DESC);
346MODULE_ALIAS("platform:orion-ehci");
347MODULE_AUTHOR("Tzachi Perelstein");
348MODULE_LICENSE("GPL v2");