Loading...
Note: File does not exist in v4.6.
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * STMicroelectronics STM32 USB PHY Controller driver
4 *
5 * Copyright (C) 2018 STMicroelectronics
6 * Author(s): Amelie Delaunay <amelie.delaunay@st.com>.
7 */
8#include <linux/bitfield.h>
9#include <linux/clk.h>
10#include <linux/clk-provider.h>
11#include <linux/delay.h>
12#include <linux/iopoll.h>
13#include <linux/kernel.h>
14#include <linux/module.h>
15#include <linux/of.h>
16#include <linux/phy/phy.h>
17#include <linux/platform_device.h>
18#include <linux/reset.h>
19#include <linux/units.h>
20
21#define STM32_USBPHYC_PLL 0x0
22#define STM32_USBPHYC_MISC 0x8
23#define STM32_USBPHYC_MONITOR(X) (0x108 + ((X) * 0x100))
24#define STM32_USBPHYC_TUNE(X) (0x10C + ((X) * 0x100))
25#define STM32_USBPHYC_VERSION 0x3F4
26
27/* STM32_USBPHYC_PLL bit fields */
28#define PLLNDIV GENMASK(6, 0)
29#define PLLFRACIN GENMASK(25, 10)
30#define PLLEN BIT(26)
31#define PLLSTRB BIT(27)
32#define PLLSTRBYP BIT(28)
33#define PLLFRACCTL BIT(29)
34#define PLLDITHEN0 BIT(30)
35#define PLLDITHEN1 BIT(31)
36
37/* STM32_USBPHYC_MISC bit fields */
38#define SWITHOST BIT(0)
39
40/* STM32_USBPHYC_MONITOR bit fields */
41#define STM32_USBPHYC_MON_OUT GENMASK(3, 0)
42#define STM32_USBPHYC_MON_SEL GENMASK(8, 4)
43#define STM32_USBPHYC_MON_SEL_LOCKP 0x1F
44#define STM32_USBPHYC_MON_OUT_LOCKP BIT(3)
45
46/* STM32_USBPHYC_TUNE bit fields */
47#define INCURREN BIT(0)
48#define INCURRINT BIT(1)
49#define LFSCAPEN BIT(2)
50#define HSDRVSLEW BIT(3)
51#define HSDRVDCCUR BIT(4)
52#define HSDRVDCLEV BIT(5)
53#define HSDRVCURINCR BIT(6)
54#define FSDRVRFADJ BIT(7)
55#define HSDRVRFRED BIT(8)
56#define HSDRVCHKITRM GENMASK(12, 9)
57#define HSDRVCHKZTRM GENMASK(14, 13)
58#define OTPCOMP GENMASK(19, 15)
59#define SQLCHCTL GENMASK(21, 20)
60#define HDRXGNEQEN BIT(22)
61#define HSRXOFF GENMASK(24, 23)
62#define HSFALLPREEM BIT(25)
63#define SHTCCTCTLPROT BIT(26)
64#define STAGSEL BIT(27)
65
66enum boosting_vals {
67 BOOST_1000_UA = 1000,
68 BOOST_2000_UA = 2000,
69};
70
71enum dc_level_vals {
72 DC_NOMINAL,
73 DC_PLUS_5_TO_7_MV,
74 DC_PLUS_10_TO_14_MV,
75 DC_MINUS_5_TO_7_MV,
76 DC_MAX,
77};
78
79enum current_trim {
80 CUR_NOMINAL,
81 CUR_PLUS_1_56_PCT,
82 CUR_PLUS_3_12_PCT,
83 CUR_PLUS_4_68_PCT,
84 CUR_PLUS_6_24_PCT,
85 CUR_PLUS_7_8_PCT,
86 CUR_PLUS_9_36_PCT,
87 CUR_PLUS_10_92_PCT,
88 CUR_PLUS_12_48_PCT,
89 CUR_PLUS_14_04_PCT,
90 CUR_PLUS_15_6_PCT,
91 CUR_PLUS_17_16_PCT,
92 CUR_PLUS_19_01_PCT,
93 CUR_PLUS_20_58_PCT,
94 CUR_PLUS_22_16_PCT,
95 CUR_PLUS_23_73_PCT,
96 CUR_MAX,
97};
98
99enum impedance_trim {
100 IMP_NOMINAL,
101 IMP_MINUS_2_OHMS,
102 IMP_MINUS_4_OMHS,
103 IMP_MINUS_6_OHMS,
104 IMP_MAX,
105};
106
107enum squelch_level {
108 SQLCH_NOMINAL,
109 SQLCH_PLUS_7_MV,
110 SQLCH_MINUS_5_MV,
111 SQLCH_PLUS_14_MV,
112 SQLCH_MAX,
113};
114
115enum rx_offset {
116 NO_RX_OFFSET,
117 RX_OFFSET_PLUS_5_MV,
118 RX_OFFSET_PLUS_10_MV,
119 RX_OFFSET_MINUS_5_MV,
120 RX_OFFSET_MAX,
121};
122
123/* STM32_USBPHYC_VERSION bit fields */
124#define MINREV GENMASK(3, 0)
125#define MAJREV GENMASK(7, 4)
126
127#define PLL_FVCO_MHZ 2880
128#define PLL_INFF_MIN_RATE_HZ 19200000
129#define PLL_INFF_MAX_RATE_HZ 38400000
130
131struct pll_params {
132 u8 ndiv;
133 u16 frac;
134};
135
136struct stm32_usbphyc_phy {
137 struct phy *phy;
138 struct stm32_usbphyc *usbphyc;
139 struct regulator *vbus;
140 u32 index;
141 bool active;
142 u32 tune;
143};
144
145struct stm32_usbphyc {
146 struct device *dev;
147 void __iomem *base;
148 struct clk *clk;
149 struct reset_control *rst;
150 struct stm32_usbphyc_phy **phys;
151 int nphys;
152 struct regulator *vdda1v1;
153 struct regulator *vdda1v8;
154 atomic_t n_pll_cons;
155 struct clk_hw clk48_hw;
156 int switch_setup;
157};
158
159static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits)
160{
161 writel_relaxed(readl_relaxed(reg) | bits, reg);
162}
163
164static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits)
165{
166 writel_relaxed(readl_relaxed(reg) & ~bits, reg);
167}
168
169static int stm32_usbphyc_regulators_enable(struct stm32_usbphyc *usbphyc)
170{
171 int ret;
172
173 ret = regulator_enable(usbphyc->vdda1v1);
174 if (ret)
175 return ret;
176
177 ret = regulator_enable(usbphyc->vdda1v8);
178 if (ret)
179 goto vdda1v1_disable;
180
181 return 0;
182
183vdda1v1_disable:
184 regulator_disable(usbphyc->vdda1v1);
185
186 return ret;
187}
188
189static int stm32_usbphyc_regulators_disable(struct stm32_usbphyc *usbphyc)
190{
191 int ret;
192
193 ret = regulator_disable(usbphyc->vdda1v8);
194 if (ret)
195 return ret;
196
197 ret = regulator_disable(usbphyc->vdda1v1);
198 if (ret)
199 return ret;
200
201 return 0;
202}
203
204static void stm32_usbphyc_get_pll_params(u32 clk_rate,
205 struct pll_params *pll_params)
206{
207 unsigned long long fvco, ndiv, frac;
208
209 /* _
210 * | FVCO = INFF*2*(NDIV + FRACT/2^16) when DITHER_DISABLE[1] = 1
211 * | FVCO = 2880MHz
212 * <
213 * | NDIV = integer part of input bits to set the LDF
214 * |_FRACT = fractional part of input bits to set the LDF
215 * => PLLNDIV = integer part of (FVCO / (INFF*2))
216 * => PLLFRACIN = fractional part of(FVCO / INFF*2) * 2^16
217 * <=> PLLFRACIN = ((FVCO / (INFF*2)) - PLLNDIV) * 2^16
218 */
219 fvco = (unsigned long long)PLL_FVCO_MHZ * HZ_PER_MHZ;
220
221 ndiv = fvco;
222 do_div(ndiv, (clk_rate * 2));
223 pll_params->ndiv = (u8)ndiv;
224
225 frac = fvco * (1 << 16);
226 do_div(frac, (clk_rate * 2));
227 frac = frac - (ndiv * (1 << 16));
228 pll_params->frac = (u16)frac;
229}
230
231static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)
232{
233 struct pll_params pll_params;
234 u32 clk_rate = clk_get_rate(usbphyc->clk);
235 u32 ndiv, frac;
236 u32 usbphyc_pll;
237
238 if ((clk_rate < PLL_INFF_MIN_RATE_HZ) ||
239 (clk_rate > PLL_INFF_MAX_RATE_HZ)) {
240 dev_err(usbphyc->dev, "input clk freq (%dHz) out of range\n",
241 clk_rate);
242 return -EINVAL;
243 }
244
245 stm32_usbphyc_get_pll_params(clk_rate, &pll_params);
246 ndiv = FIELD_PREP(PLLNDIV, pll_params.ndiv);
247 frac = FIELD_PREP(PLLFRACIN, pll_params.frac);
248
249 usbphyc_pll = PLLDITHEN1 | PLLDITHEN0 | PLLSTRBYP | ndiv;
250
251 if (pll_params.frac)
252 usbphyc_pll |= PLLFRACCTL | frac;
253
254 writel_relaxed(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL);
255
256 dev_dbg(usbphyc->dev, "input clk freq=%dHz, ndiv=%lu, frac=%lu\n",
257 clk_rate, FIELD_GET(PLLNDIV, usbphyc_pll),
258 FIELD_GET(PLLFRACIN, usbphyc_pll));
259
260 return 0;
261}
262
263static int __stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc)
264{
265 void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL;
266 u32 pllen;
267
268 stm32_usbphyc_clr_bits(pll_reg, PLLEN);
269
270 /* Wait for minimum width of powerdown pulse (ENABLE = Low) */
271 if (readl_relaxed_poll_timeout(pll_reg, pllen, !(pllen & PLLEN), 5, 50))
272 dev_err(usbphyc->dev, "PLL not reset\n");
273
274 return stm32_usbphyc_regulators_disable(usbphyc);
275}
276
277static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc)
278{
279 /* Check if a phy port is still active or clk48 in use */
280 if (atomic_dec_return(&usbphyc->n_pll_cons) > 0)
281 return 0;
282
283 return __stm32_usbphyc_pll_disable(usbphyc);
284}
285
286static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc)
287{
288 void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL;
289 bool pllen = readl_relaxed(pll_reg) & PLLEN;
290 int ret;
291
292 /*
293 * Check if a phy port or clk48 prepare has configured the pll
294 * and ensure the PLL is enabled
295 */
296 if (atomic_inc_return(&usbphyc->n_pll_cons) > 1 && pllen)
297 return 0;
298
299 if (pllen) {
300 /*
301 * PLL shouldn't be enabled without known consumer,
302 * disable it and reinit n_pll_cons
303 */
304 dev_warn(usbphyc->dev, "PLL enabled without known consumers\n");
305
306 ret = __stm32_usbphyc_pll_disable(usbphyc);
307 if (ret)
308 goto dec_n_pll_cons;
309 }
310
311 ret = stm32_usbphyc_regulators_enable(usbphyc);
312 if (ret)
313 goto dec_n_pll_cons;
314
315 ret = stm32_usbphyc_pll_init(usbphyc);
316 if (ret)
317 goto reg_disable;
318
319 stm32_usbphyc_set_bits(pll_reg, PLLEN);
320
321 /* Wait for maximum lock time */
322 usleep_range(200, 300);
323
324 return 0;
325
326reg_disable:
327 stm32_usbphyc_regulators_disable(usbphyc);
328
329dec_n_pll_cons:
330 atomic_dec(&usbphyc->n_pll_cons);
331
332 return ret;
333}
334
335static int stm32_usbphyc_phy_init(struct phy *phy)
336{
337 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
338 struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc;
339 u32 reg_mon = STM32_USBPHYC_MONITOR(usbphyc_phy->index);
340 u32 monsel = FIELD_PREP(STM32_USBPHYC_MON_SEL,
341 STM32_USBPHYC_MON_SEL_LOCKP);
342 u32 monout;
343 int ret;
344
345 ret = stm32_usbphyc_pll_enable(usbphyc);
346 if (ret)
347 return ret;
348
349 /* Check that PLL Lock input to PHY is High */
350 writel_relaxed(monsel, usbphyc->base + reg_mon);
351 ret = readl_relaxed_poll_timeout(usbphyc->base + reg_mon, monout,
352 (monout & STM32_USBPHYC_MON_OUT_LOCKP),
353 100, 1000);
354 if (ret) {
355 dev_err(usbphyc->dev, "PLL Lock input to PHY is Low (val=%x)\n",
356 (u32)(monout & STM32_USBPHYC_MON_OUT));
357 goto pll_disable;
358 }
359
360 usbphyc_phy->active = true;
361
362 return 0;
363
364pll_disable:
365 stm32_usbphyc_pll_disable(usbphyc);
366
367 return ret;
368}
369
370static int stm32_usbphyc_phy_exit(struct phy *phy)
371{
372 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
373 struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc;
374
375 usbphyc_phy->active = false;
376
377 return stm32_usbphyc_pll_disable(usbphyc);
378}
379
380static int stm32_usbphyc_phy_power_on(struct phy *phy)
381{
382 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
383
384 if (usbphyc_phy->vbus)
385 return regulator_enable(usbphyc_phy->vbus);
386
387 return 0;
388}
389
390static int stm32_usbphyc_phy_power_off(struct phy *phy)
391{
392 struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy);
393
394 if (usbphyc_phy->vbus)
395 return regulator_disable(usbphyc_phy->vbus);
396
397 return 0;
398}
399
400static const struct phy_ops stm32_usbphyc_phy_ops = {
401 .init = stm32_usbphyc_phy_init,
402 .exit = stm32_usbphyc_phy_exit,
403 .power_on = stm32_usbphyc_phy_power_on,
404 .power_off = stm32_usbphyc_phy_power_off,
405 .owner = THIS_MODULE,
406};
407
408static int stm32_usbphyc_clk48_prepare(struct clk_hw *hw)
409{
410 struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw);
411
412 return stm32_usbphyc_pll_enable(usbphyc);
413}
414
415static void stm32_usbphyc_clk48_unprepare(struct clk_hw *hw)
416{
417 struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw);
418
419 stm32_usbphyc_pll_disable(usbphyc);
420}
421
422static unsigned long stm32_usbphyc_clk48_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
423{
424 return 48000000;
425}
426
427static const struct clk_ops usbphyc_clk48_ops = {
428 .prepare = stm32_usbphyc_clk48_prepare,
429 .unprepare = stm32_usbphyc_clk48_unprepare,
430 .recalc_rate = stm32_usbphyc_clk48_recalc_rate,
431};
432
433static void stm32_usbphyc_clk48_unregister(void *data)
434{
435 struct stm32_usbphyc *usbphyc = data;
436
437 of_clk_del_provider(usbphyc->dev->of_node);
438 clk_hw_unregister(&usbphyc->clk48_hw);
439}
440
441static int stm32_usbphyc_clk48_register(struct stm32_usbphyc *usbphyc)
442{
443 struct device_node *node = usbphyc->dev->of_node;
444 struct clk_init_data init = { };
445 int ret = 0;
446
447 init.name = "ck_usbo_48m";
448 init.ops = &usbphyc_clk48_ops;
449
450 usbphyc->clk48_hw.init = &init;
451
452 ret = clk_hw_register(usbphyc->dev, &usbphyc->clk48_hw);
453 if (ret)
454 return ret;
455
456 ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &usbphyc->clk48_hw);
457 if (ret)
458 clk_hw_unregister(&usbphyc->clk48_hw);
459
460 return ret;
461}
462
463static void stm32_usbphyc_phy_tuning(struct stm32_usbphyc *usbphyc,
464 struct device_node *np, u32 index)
465{
466 struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys[index];
467 u32 reg = STM32_USBPHYC_TUNE(index);
468 u32 otpcomp, val;
469 int ret;
470
471 /* Backup OTP compensation code */
472 otpcomp = FIELD_GET(OTPCOMP, readl_relaxed(usbphyc->base + reg));
473
474 ret = of_property_read_u32(np, "st,current-boost-microamp", &val);
475 if (ret != -EINVAL) {
476 if (!ret && (val == BOOST_1000_UA || val == BOOST_2000_UA)) {
477 val = (val == BOOST_2000_UA) ? 1 : 0;
478 usbphyc_phy->tune |= INCURREN | FIELD_PREP(INCURRINT, val);
479 } else {
480 dev_warn(usbphyc->dev, "phy%d: invalid st,current-boost-microamp\n", index);
481 }
482 }
483
484 if (!of_property_read_bool(np, "st,no-lsfs-fb-cap"))
485 usbphyc_phy->tune |= LFSCAPEN;
486
487 if (of_property_read_bool(np, "st,decrease-hs-slew-rate"))
488 usbphyc_phy->tune |= HSDRVSLEW;
489
490 ret = of_property_read_u32(np, "st,tune-hs-dc-level", &val);
491 if (ret != -EINVAL) {
492 if (!ret && val < DC_MAX) {
493 if (val == DC_MINUS_5_TO_7_MV) {/* Decreases HS driver DC level */
494 usbphyc_phy->tune |= HSDRVDCCUR;
495 } else if (val > 0) { /* Increases HS driver DC level */
496 val = (val == DC_PLUS_10_TO_14_MV) ? 1 : 0;
497 usbphyc_phy->tune |= HSDRVCURINCR | FIELD_PREP(HSDRVDCLEV, val);
498 }
499 } else {
500 dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-dc-level\n", index);
501 }
502 }
503
504 if (of_property_read_bool(np, "st,enable-fs-rftime-tuning"))
505 usbphyc_phy->tune |= FSDRVRFADJ;
506
507 if (of_property_read_bool(np, "st,enable-hs-rftime-reduction"))
508 usbphyc_phy->tune |= HSDRVRFRED;
509
510 ret = of_property_read_u32(np, "st,trim-hs-current", &val);
511 if (ret != -EINVAL) {
512 if (!ret && val < CUR_MAX)
513 usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKITRM, val);
514 else
515 dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-current\n", index);
516 }
517
518 ret = of_property_read_u32(np, "st,trim-hs-impedance", &val);
519 if (ret != -EINVAL) {
520 if (!ret && val < IMP_MAX)
521 usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKZTRM, val);
522 else
523 dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-impedance\n", index);
524 }
525
526 ret = of_property_read_u32(np, "st,tune-squelch-level", &val);
527 if (ret != -EINVAL) {
528 if (!ret && val < SQLCH_MAX)
529 usbphyc_phy->tune |= FIELD_PREP(SQLCHCTL, val);
530 else
531 dev_warn(usbphyc->dev, "phy%d: invalid st,tune-squelch\n", index);
532 }
533
534 if (of_property_read_bool(np, "st,enable-hs-rx-gain-eq"))
535 usbphyc_phy->tune |= HDRXGNEQEN;
536
537 ret = of_property_read_u32(np, "st,tune-hs-rx-offset", &val);
538 if (ret != -EINVAL) {
539 if (!ret && val < RX_OFFSET_MAX)
540 usbphyc_phy->tune |= FIELD_PREP(HSRXOFF, val);
541 else
542 dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-rx-offset\n", index);
543 }
544
545 if (of_property_read_bool(np, "st,no-hs-ftime-ctrl"))
546 usbphyc_phy->tune |= HSFALLPREEM;
547
548 if (!of_property_read_bool(np, "st,no-lsfs-sc"))
549 usbphyc_phy->tune |= SHTCCTCTLPROT;
550
551 if (of_property_read_bool(np, "st,enable-hs-tx-staggering"))
552 usbphyc_phy->tune |= STAGSEL;
553
554 /* Restore OTP compensation code */
555 usbphyc_phy->tune |= FIELD_PREP(OTPCOMP, otpcomp);
556
557 /*
558 * By default, if no st,xxx tuning property is used, usbphyc_phy->tune is equal to
559 * STM32_USBPHYC_TUNE reset value (LFSCAPEN | SHTCCTCTLPROT | OTPCOMP).
560 */
561 writel_relaxed(usbphyc_phy->tune, usbphyc->base + reg);
562}
563
564static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc,
565 u32 utmi_switch)
566{
567 if (!utmi_switch)
568 stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_MISC,
569 SWITHOST);
570 else
571 stm32_usbphyc_set_bits(usbphyc->base + STM32_USBPHYC_MISC,
572 SWITHOST);
573 usbphyc->switch_setup = utmi_switch;
574}
575
576static struct phy *stm32_usbphyc_of_xlate(struct device *dev,
577 struct of_phandle_args *args)
578{
579 struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev);
580 struct stm32_usbphyc_phy *usbphyc_phy = NULL;
581 struct device_node *phynode = args->np;
582 int port = 0;
583
584 for (port = 0; port < usbphyc->nphys; port++) {
585 if (phynode == usbphyc->phys[port]->phy->dev.of_node) {
586 usbphyc_phy = usbphyc->phys[port];
587 break;
588 }
589 }
590 if (!usbphyc_phy) {
591 dev_err(dev, "failed to find phy\n");
592 return ERR_PTR(-EINVAL);
593 }
594
595 if (((usbphyc_phy->index == 0) && (args->args_count != 0)) ||
596 ((usbphyc_phy->index == 1) && (args->args_count != 1))) {
597 dev_err(dev, "invalid number of cells for phy port%d\n",
598 usbphyc_phy->index);
599 return ERR_PTR(-EINVAL);
600 }
601
602 /* Configure the UTMI switch for PHY port#2 */
603 if (usbphyc_phy->index == 1) {
604 if (usbphyc->switch_setup < 0) {
605 stm32_usbphyc_switch_setup(usbphyc, args->args[0]);
606 } else {
607 if (args->args[0] != usbphyc->switch_setup) {
608 dev_err(dev, "phy port1 already used\n");
609 return ERR_PTR(-EBUSY);
610 }
611 }
612 }
613
614 return usbphyc_phy->phy;
615}
616
617static int stm32_usbphyc_probe(struct platform_device *pdev)
618{
619 struct stm32_usbphyc *usbphyc;
620 struct device *dev = &pdev->dev;
621 struct device_node *child, *np = dev->of_node;
622 struct phy_provider *phy_provider;
623 u32 pllen, version;
624 int ret, port = 0;
625
626 usbphyc = devm_kzalloc(dev, sizeof(*usbphyc), GFP_KERNEL);
627 if (!usbphyc)
628 return -ENOMEM;
629 usbphyc->dev = dev;
630 dev_set_drvdata(dev, usbphyc);
631
632 usbphyc->base = devm_platform_ioremap_resource(pdev, 0);
633 if (IS_ERR(usbphyc->base))
634 return PTR_ERR(usbphyc->base);
635
636 usbphyc->clk = devm_clk_get(dev, NULL);
637 if (IS_ERR(usbphyc->clk))
638 return dev_err_probe(dev, PTR_ERR(usbphyc->clk), "clk get_failed\n");
639
640 ret = clk_prepare_enable(usbphyc->clk);
641 if (ret) {
642 dev_err(dev, "clk enable failed: %d\n", ret);
643 return ret;
644 }
645
646 usbphyc->rst = devm_reset_control_get(dev, NULL);
647 if (!IS_ERR(usbphyc->rst)) {
648 reset_control_assert(usbphyc->rst);
649 udelay(2);
650 reset_control_deassert(usbphyc->rst);
651 } else {
652 ret = PTR_ERR(usbphyc->rst);
653 if (ret == -EPROBE_DEFER)
654 goto clk_disable;
655
656 stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_PLL, PLLEN);
657 }
658
659 /*
660 * Wait for minimum width of powerdown pulse (ENABLE = Low):
661 * we have to ensure the PLL is disabled before phys initialization.
662 */
663 if (readl_relaxed_poll_timeout(usbphyc->base + STM32_USBPHYC_PLL,
664 pllen, !(pllen & PLLEN), 5, 50)) {
665 dev_warn(usbphyc->dev, "PLL not reset\n");
666 ret = -EPROBE_DEFER;
667 goto clk_disable;
668 }
669
670 usbphyc->switch_setup = -EINVAL;
671 usbphyc->nphys = of_get_child_count(np);
672 usbphyc->phys = devm_kcalloc(dev, usbphyc->nphys,
673 sizeof(*usbphyc->phys), GFP_KERNEL);
674 if (!usbphyc->phys) {
675 ret = -ENOMEM;
676 goto clk_disable;
677 }
678
679 usbphyc->vdda1v1 = devm_regulator_get(dev, "vdda1v1");
680 if (IS_ERR(usbphyc->vdda1v1)) {
681 ret = dev_err_probe(dev, PTR_ERR(usbphyc->vdda1v1),
682 "failed to get vdda1v1 supply\n");
683 goto clk_disable;
684 }
685
686 usbphyc->vdda1v8 = devm_regulator_get(dev, "vdda1v8");
687 if (IS_ERR(usbphyc->vdda1v8)) {
688 ret = dev_err_probe(dev, PTR_ERR(usbphyc->vdda1v8),
689 "failed to get vdda1v8 supply\n");
690 goto clk_disable;
691 }
692
693 for_each_child_of_node(np, child) {
694 struct stm32_usbphyc_phy *usbphyc_phy;
695 struct phy *phy;
696 u32 index;
697
698 phy = devm_phy_create(dev, child, &stm32_usbphyc_phy_ops);
699 if (IS_ERR(phy)) {
700 ret = PTR_ERR(phy);
701 if (ret != -EPROBE_DEFER)
702 dev_err(dev, "failed to create phy%d: %d\n",
703 port, ret);
704 goto put_child;
705 }
706
707 usbphyc_phy = devm_kzalloc(dev, sizeof(*usbphyc_phy),
708 GFP_KERNEL);
709 if (!usbphyc_phy) {
710 ret = -ENOMEM;
711 goto put_child;
712 }
713
714 ret = of_property_read_u32(child, "reg", &index);
715 if (ret || index > usbphyc->nphys) {
716 dev_err(&phy->dev, "invalid reg property: %d\n", ret);
717 if (!ret)
718 ret = -EINVAL;
719 goto put_child;
720 }
721
722 usbphyc->phys[port] = usbphyc_phy;
723 phy_set_bus_width(phy, 8);
724 phy_set_drvdata(phy, usbphyc_phy);
725
726 usbphyc->phys[port]->phy = phy;
727 usbphyc->phys[port]->usbphyc = usbphyc;
728 usbphyc->phys[port]->index = index;
729 usbphyc->phys[port]->active = false;
730
731 usbphyc->phys[port]->vbus = devm_regulator_get_optional(&phy->dev, "vbus");
732 if (IS_ERR(usbphyc->phys[port]->vbus)) {
733 ret = PTR_ERR(usbphyc->phys[port]->vbus);
734 if (ret == -EPROBE_DEFER)
735 goto put_child;
736 usbphyc->phys[port]->vbus = NULL;
737 }
738
739 /* Configure phy tuning */
740 stm32_usbphyc_phy_tuning(usbphyc, child, index);
741
742 port++;
743 }
744
745 phy_provider = devm_of_phy_provider_register(dev,
746 stm32_usbphyc_of_xlate);
747 if (IS_ERR(phy_provider)) {
748 ret = PTR_ERR(phy_provider);
749 dev_err(dev, "failed to register phy provider: %d\n", ret);
750 goto clk_disable;
751 }
752
753 ret = stm32_usbphyc_clk48_register(usbphyc);
754 if (ret) {
755 dev_err(dev, "failed to register ck_usbo_48m clock: %d\n", ret);
756 goto clk_disable;
757 }
758
759 version = readl_relaxed(usbphyc->base + STM32_USBPHYC_VERSION);
760 dev_info(dev, "registered rev:%lu.%lu\n",
761 FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version));
762
763 return 0;
764
765put_child:
766 of_node_put(child);
767clk_disable:
768 clk_disable_unprepare(usbphyc->clk);
769
770 return ret;
771}
772
773static void stm32_usbphyc_remove(struct platform_device *pdev)
774{
775 struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev);
776 int port;
777
778 /* Ensure PHYs are not active, to allow PLL disabling */
779 for (port = 0; port < usbphyc->nphys; port++)
780 if (usbphyc->phys[port]->active)
781 stm32_usbphyc_phy_exit(usbphyc->phys[port]->phy);
782
783 stm32_usbphyc_clk48_unregister(usbphyc);
784
785 clk_disable_unprepare(usbphyc->clk);
786}
787
788static int __maybe_unused stm32_usbphyc_resume(struct device *dev)
789{
790 struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev);
791 struct stm32_usbphyc_phy *usbphyc_phy;
792 int port;
793
794 if (usbphyc->switch_setup >= 0)
795 stm32_usbphyc_switch_setup(usbphyc, usbphyc->switch_setup);
796
797 for (port = 0; port < usbphyc->nphys; port++) {
798 usbphyc_phy = usbphyc->phys[port];
799 writel_relaxed(usbphyc_phy->tune, usbphyc->base + STM32_USBPHYC_TUNE(port));
800 }
801
802 return 0;
803}
804
805static SIMPLE_DEV_PM_OPS(stm32_usbphyc_pm_ops, NULL, stm32_usbphyc_resume);
806
807static const struct of_device_id stm32_usbphyc_of_match[] = {
808 { .compatible = "st,stm32mp1-usbphyc", },
809 { },
810};
811MODULE_DEVICE_TABLE(of, stm32_usbphyc_of_match);
812
813static struct platform_driver stm32_usbphyc_driver = {
814 .probe = stm32_usbphyc_probe,
815 .remove_new = stm32_usbphyc_remove,
816 .driver = {
817 .of_match_table = stm32_usbphyc_of_match,
818 .name = "stm32-usbphyc",
819 .pm = &stm32_usbphyc_pm_ops,
820 }
821};
822module_platform_driver(stm32_usbphyc_driver);
823
824MODULE_DESCRIPTION("STMicroelectronics STM32 USBPHYC driver");
825MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
826MODULE_LICENSE("GPL v2");