Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/******************************************************************************
3 *
4 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
5 *
6 * Contact Information:
7 * Intel Linux Wireless <ilw@linux.intel.com>
8 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
9 *
10 *****************************************************************************/
11#include <linux/kernel.h>
12#include <linux/skbuff.h>
13#include <linux/slab.h>
14#include <net/mac80211.h>
15
16#include <linux/netdevice.h>
17#include <linux/etherdevice.h>
18#include <linux/delay.h>
19
20#include <linux/workqueue.h>
21
22#include "common.h"
23#include "4965.h"
24
25#define IL4965_RS_NAME "iwl-4965-rs"
26
27#define NUM_TRY_BEFORE_ANT_TOGGLE 1
28#define IL_NUMBER_TRY 1
29#define IL_HT_NUMBER_TRY 3
30
31#define RATE_MAX_WINDOW 62 /* # tx in history win */
32#define RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */
33#define RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */
34
35/* max allowed rate miss before sync LQ cmd */
36#define IL_MISSED_RATE_MAX 15
37/* max time to accum history 2 seconds */
38#define RATE_SCALE_FLUSH_INTVL (3*HZ)
39
40static u8 rs_ht_to_legacy[] = {
41 RATE_6M_IDX, RATE_6M_IDX,
42 RATE_6M_IDX, RATE_6M_IDX,
43 RATE_6M_IDX,
44 RATE_6M_IDX, RATE_9M_IDX,
45 RATE_12M_IDX, RATE_18M_IDX,
46 RATE_24M_IDX, RATE_36M_IDX,
47 RATE_48M_IDX, RATE_54M_IDX
48};
49
50static const u8 ant_toggle_lookup[] = {
51 /*ANT_NONE -> */ ANT_NONE,
52 /*ANT_A -> */ ANT_B,
53 /*ANT_B -> */ ANT_C,
54 /*ANT_AB -> */ ANT_BC,
55 /*ANT_C -> */ ANT_A,
56 /*ANT_AC -> */ ANT_AB,
57 /*ANT_BC -> */ ANT_AC,
58 /*ANT_ABC -> */ ANT_ABC,
59};
60
61#define IL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
62 [RATE_##r##M_IDX] = { RATE_##r##M_PLCP, \
63 RATE_SISO_##s##M_PLCP, \
64 RATE_MIMO2_##s##M_PLCP,\
65 RATE_##r##M_IEEE, \
66 RATE_##ip##M_IDX, \
67 RATE_##in##M_IDX, \
68 RATE_##rp##M_IDX, \
69 RATE_##rn##M_IDX, \
70 RATE_##pp##M_IDX, \
71 RATE_##np##M_IDX }
72
73/*
74 * Parameter order:
75 * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
76 *
77 * If there isn't a valid next or previous rate then INV is used which
78 * maps to RATE_INVALID
79 *
80 */
81const struct il_rate_info il_rates[RATE_COUNT] = {
82 IL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
83 IL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
84 IL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
85 IL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */
86 IL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
87 IL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
88 IL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
89 IL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
90 IL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
91 IL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
92 IL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
93 IL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
94 IL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
95};
96
97static int
98il4965_hwrate_to_plcp_idx(u32 rate_n_flags)
99{
100 int idx = 0;
101
102 /* HT rate format */
103 if (rate_n_flags & RATE_MCS_HT_MSK) {
104 idx = (rate_n_flags & 0xff);
105
106 if (idx >= RATE_MIMO2_6M_PLCP)
107 idx = idx - RATE_MIMO2_6M_PLCP;
108
109 idx += IL_FIRST_OFDM_RATE;
110 /* skip 9M not supported in ht */
111 if (idx >= RATE_9M_IDX)
112 idx += 1;
113 if (idx >= IL_FIRST_OFDM_RATE && idx <= IL_LAST_OFDM_RATE)
114 return idx;
115
116 /* legacy rate format, search for match in table */
117 } else {
118 for (idx = 0; idx < ARRAY_SIZE(il_rates); idx++)
119 if (il_rates[idx].plcp == (rate_n_flags & 0xFF))
120 return idx;
121 }
122
123 return -1;
124}
125
126static void il4965_rs_rate_scale_perform(struct il_priv *il,
127 struct sk_buff *skb,
128 struct ieee80211_sta *sta,
129 struct il_lq_sta *lq_sta);
130static void il4965_rs_fill_link_cmd(struct il_priv *il,
131 struct il_lq_sta *lq_sta, u32 rate_n_flags);
132static void il4965_rs_stay_in_table(struct il_lq_sta *lq_sta,
133 bool force_search);
134
135#ifdef CONFIG_MAC80211_DEBUGFS
136static void il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta,
137 u32 *rate_n_flags, int idx);
138#else
139static void
140il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta, u32 * rate_n_flags, int idx)
141{
142}
143#endif
144
145/*
146 * The following tables contain the expected throughput metrics for all rates
147 *
148 * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
149 *
150 * where invalid entries are zeros.
151 *
152 * CCK rates are only valid in legacy table and will only be used in G
153 * (2.4 GHz) band.
154 */
155
156static s32 expected_tpt_legacy[RATE_COUNT] = {
157 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0
158};
159
160static s32 expected_tpt_siso20MHz[4][RATE_COUNT] = {
161 {0, 0, 0, 0, 42, 0, 76, 102, 124, 158, 183, 193, 202}, /* Norm */
162 {0, 0, 0, 0, 46, 0, 82, 110, 132, 167, 192, 202, 210}, /* SGI */
163 {0, 0, 0, 0, 48, 0, 93, 135, 176, 251, 319, 351, 381}, /* AGG */
164 {0, 0, 0, 0, 53, 0, 102, 149, 193, 275, 348, 381, 413}, /* AGG+SGI */
165};
166
167static s32 expected_tpt_siso40MHz[4][RATE_COUNT] = {
168 {0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */
169 {0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */
170 {0, 0, 0, 0, 96, 0, 182, 259, 328, 451, 553, 598, 640}, /* AGG */
171 {0, 0, 0, 0, 106, 0, 199, 282, 357, 487, 593, 640, 683}, /* AGG+SGI */
172};
173
174static s32 expected_tpt_mimo2_20MHz[4][RATE_COUNT] = {
175 {0, 0, 0, 0, 74, 0, 123, 155, 179, 213, 235, 243, 250}, /* Norm */
176 {0, 0, 0, 0, 81, 0, 131, 164, 187, 221, 242, 250, 256}, /* SGI */
177 {0, 0, 0, 0, 92, 0, 175, 250, 317, 436, 534, 578, 619}, /* AGG */
178 {0, 0, 0, 0, 102, 0, 192, 273, 344, 470, 573, 619, 660}, /* AGG+SGI */
179};
180
181static s32 expected_tpt_mimo2_40MHz[4][RATE_COUNT] = {
182 {0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */
183 {0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */
184 {0, 0, 0, 0, 180, 0, 327, 446, 545, 708, 828, 878, 922}, /* AGG */
185 {0, 0, 0, 0, 197, 0, 355, 481, 584, 752, 872, 922, 966}, /* AGG+SGI */
186};
187
188/* mbps, mcs */
189static const struct il_rate_mcs_info il_rate_mcs[RATE_COUNT] = {
190 {"1", "BPSK DSSS"},
191 {"2", "QPSK DSSS"},
192 {"5.5", "BPSK CCK"},
193 {"11", "QPSK CCK"},
194 {"6", "BPSK 1/2"},
195 {"9", "BPSK 1/2"},
196 {"12", "QPSK 1/2"},
197 {"18", "QPSK 3/4"},
198 {"24", "16QAM 1/2"},
199 {"36", "16QAM 3/4"},
200 {"48", "64QAM 2/3"},
201 {"54", "64QAM 3/4"},
202 {"60", "64QAM 5/6"},
203};
204
205#define MCS_IDX_PER_STREAM (8)
206
207static inline u8
208il4965_rs_extract_rate(u32 rate_n_flags)
209{
210 return (u8) (rate_n_flags & 0xFF);
211}
212
213static void
214il4965_rs_rate_scale_clear_win(struct il_rate_scale_data *win)
215{
216 win->data = 0;
217 win->success_counter = 0;
218 win->success_ratio = IL_INVALID_VALUE;
219 win->counter = 0;
220 win->average_tpt = IL_INVALID_VALUE;
221 win->stamp = 0;
222}
223
224static inline u8
225il4965_rs_is_valid_ant(u8 valid_antenna, u8 ant_type)
226{
227 return (ant_type & valid_antenna) == ant_type;
228}
229
230/*
231 * removes the old data from the stats. All data that is older than
232 * TID_MAX_TIME_DIFF, will be deleted.
233 */
234static void
235il4965_rs_tl_rm_old_stats(struct il_traffic_load *tl, u32 curr_time)
236{
237 /* The oldest age we want to keep */
238 u32 oldest_time = curr_time - TID_MAX_TIME_DIFF;
239
240 while (tl->queue_count && tl->time_stamp < oldest_time) {
241 tl->total -= tl->packet_count[tl->head];
242 tl->packet_count[tl->head] = 0;
243 tl->time_stamp += TID_QUEUE_CELL_SPACING;
244 tl->queue_count--;
245 tl->head++;
246 if (tl->head >= TID_QUEUE_MAX_SIZE)
247 tl->head = 0;
248 }
249}
250
251/*
252 * increment traffic load value for tid and also remove
253 * any old values if passed the certain time period
254 */
255static u8
256il4965_rs_tl_add_packet(struct il_lq_sta *lq_data, struct ieee80211_hdr *hdr)
257{
258 u32 curr_time = jiffies_to_msecs(jiffies);
259 u32 time_diff;
260 s32 idx;
261 struct il_traffic_load *tl = NULL;
262 u8 tid;
263
264 if (ieee80211_is_data_qos(hdr->frame_control)) {
265 u8 *qc = ieee80211_get_qos_ctl(hdr);
266 tid = qc[0] & 0xf;
267 } else
268 return MAX_TID_COUNT;
269
270 if (unlikely(tid >= TID_MAX_LOAD_COUNT))
271 return MAX_TID_COUNT;
272
273 tl = &lq_data->load[tid];
274
275 curr_time -= curr_time % TID_ROUND_VALUE;
276
277 /* Happens only for the first packet. Initialize the data */
278 if (!(tl->queue_count)) {
279 tl->total = 1;
280 tl->time_stamp = curr_time;
281 tl->queue_count = 1;
282 tl->head = 0;
283 tl->packet_count[0] = 1;
284 return MAX_TID_COUNT;
285 }
286
287 time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
288 idx = time_diff / TID_QUEUE_CELL_SPACING;
289
290 /* The history is too long: remove data that is older than */
291 /* TID_MAX_TIME_DIFF */
292 if (idx >= TID_QUEUE_MAX_SIZE)
293 il4965_rs_tl_rm_old_stats(tl, curr_time);
294
295 idx = (tl->head + idx) % TID_QUEUE_MAX_SIZE;
296 tl->packet_count[idx] = tl->packet_count[idx] + 1;
297 tl->total = tl->total + 1;
298
299 if ((idx + 1) > tl->queue_count)
300 tl->queue_count = idx + 1;
301
302 return tid;
303}
304
305/*
306 get the traffic load value for tid
307*/
308static u32
309il4965_rs_tl_get_load(struct il_lq_sta *lq_data, u8 tid)
310{
311 u32 curr_time = jiffies_to_msecs(jiffies);
312 u32 time_diff;
313 s32 idx;
314 struct il_traffic_load *tl = NULL;
315
316 if (tid >= TID_MAX_LOAD_COUNT)
317 return 0;
318
319 tl = &(lq_data->load[tid]);
320
321 curr_time -= curr_time % TID_ROUND_VALUE;
322
323 if (!(tl->queue_count))
324 return 0;
325
326 time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
327 idx = time_diff / TID_QUEUE_CELL_SPACING;
328
329 /* The history is too long: remove data that is older than */
330 /* TID_MAX_TIME_DIFF */
331 if (idx >= TID_QUEUE_MAX_SIZE)
332 il4965_rs_tl_rm_old_stats(tl, curr_time);
333
334 return tl->total;
335}
336
337static int
338il4965_rs_tl_turn_on_agg_for_tid(struct il_priv *il, struct il_lq_sta *lq_data,
339 u8 tid, struct ieee80211_sta *sta)
340{
341 int ret = -EAGAIN;
342 u32 load;
343
344 load = il4965_rs_tl_get_load(lq_data, tid);
345
346 if (load > IL_AGG_LOAD_THRESHOLD) {
347 D_HT("Starting Tx agg: STA: %pM tid: %d\n", sta->addr, tid);
348 ret = ieee80211_start_tx_ba_session(sta, tid, 5000);
349 if (ret == -EAGAIN) {
350 /*
351 * driver and mac80211 is out of sync
352 * this might be cause by reloading firmware
353 * stop the tx ba session here
354 */
355 IL_ERR("Fail start Tx agg on tid: %d\n", tid);
356 ieee80211_stop_tx_ba_session(sta, tid);
357 }
358 } else
359 D_HT("Aggregation not enabled for tid %d because load = %u\n",
360 tid, load);
361
362 return ret;
363}
364
365static void
366il4965_rs_tl_turn_on_agg(struct il_priv *il, u8 tid, struct il_lq_sta *lq_data,
367 struct ieee80211_sta *sta)
368{
369 if (tid < TID_MAX_LOAD_COUNT)
370 il4965_rs_tl_turn_on_agg_for_tid(il, lq_data, tid, sta);
371 else
372 IL_ERR("tid exceeds max load count: %d/%d\n", tid,
373 TID_MAX_LOAD_COUNT);
374}
375
376static inline int
377il4965_get_il4965_num_of_ant_from_rate(u32 rate_n_flags)
378{
379 return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) +
380 !!(rate_n_flags & RATE_MCS_ANT_B_MSK) +
381 !!(rate_n_flags & RATE_MCS_ANT_C_MSK);
382}
383
384/*
385 * Static function to get the expected throughput from an il_scale_tbl_info
386 * that wraps a NULL pointer check
387 */
388static s32
389il4965_get_expected_tpt(struct il_scale_tbl_info *tbl, int rs_idx)
390{
391 if (tbl->expected_tpt)
392 return tbl->expected_tpt[rs_idx];
393 return 0;
394}
395
396/*
397 * il4965_rs_collect_tx_data - Update the success/failure sliding win
398 *
399 * We keep a sliding win of the last 62 packets transmitted
400 * at this rate. win->data contains the bitmask of successful
401 * packets.
402 */
403static int
404il4965_rs_collect_tx_data(struct il_scale_tbl_info *tbl, int scale_idx,
405 int attempts, int successes)
406{
407 struct il_rate_scale_data *win = NULL;
408 static const u64 mask = (((u64) 1) << (RATE_MAX_WINDOW - 1));
409 s32 fail_count, tpt;
410
411 if (scale_idx < 0 || scale_idx >= RATE_COUNT)
412 return -EINVAL;
413
414 /* Select win for current tx bit rate */
415 win = &(tbl->win[scale_idx]);
416
417 /* Get expected throughput */
418 tpt = il4965_get_expected_tpt(tbl, scale_idx);
419
420 /*
421 * Keep track of only the latest 62 tx frame attempts in this rate's
422 * history win; anything older isn't really relevant any more.
423 * If we have filled up the sliding win, drop the oldest attempt;
424 * if the oldest attempt (highest bit in bitmap) shows "success",
425 * subtract "1" from the success counter (this is the main reason
426 * we keep these bitmaps!).
427 */
428 while (attempts > 0) {
429 if (win->counter >= RATE_MAX_WINDOW) {
430
431 /* remove earliest */
432 win->counter = RATE_MAX_WINDOW - 1;
433
434 if (win->data & mask) {
435 win->data &= ~mask;
436 win->success_counter--;
437 }
438 }
439
440 /* Increment frames-attempted counter */
441 win->counter++;
442
443 /* Shift bitmap by one frame to throw away oldest history */
444 win->data <<= 1;
445
446 /* Mark the most recent #successes attempts as successful */
447 if (successes > 0) {
448 win->success_counter++;
449 win->data |= 0x1;
450 successes--;
451 }
452
453 attempts--;
454 }
455
456 /* Calculate current success ratio, avoid divide-by-0! */
457 if (win->counter > 0)
458 win->success_ratio =
459 128 * (100 * win->success_counter) / win->counter;
460 else
461 win->success_ratio = IL_INVALID_VALUE;
462
463 fail_count = win->counter - win->success_counter;
464
465 /* Calculate average throughput, if we have enough history. */
466 if (fail_count >= RATE_MIN_FAILURE_TH ||
467 win->success_counter >= RATE_MIN_SUCCESS_TH)
468 win->average_tpt = (win->success_ratio * tpt + 64) / 128;
469 else
470 win->average_tpt = IL_INVALID_VALUE;
471
472 /* Tag this win as having been updated */
473 win->stamp = jiffies;
474
475 return 0;
476}
477
478/*
479 * Fill uCode API rate_n_flags field, based on "search" or "active" table.
480 */
481static u32
482il4965_rate_n_flags_from_tbl(struct il_priv *il, struct il_scale_tbl_info *tbl,
483 int idx, u8 use_green)
484{
485 u32 rate_n_flags = 0;
486
487 if (is_legacy(tbl->lq_type)) {
488 rate_n_flags = il_rates[idx].plcp;
489 if (idx >= IL_FIRST_CCK_RATE && idx <= IL_LAST_CCK_RATE)
490 rate_n_flags |= RATE_MCS_CCK_MSK;
491
492 } else if (is_Ht(tbl->lq_type)) {
493 if (idx > IL_LAST_OFDM_RATE) {
494 IL_ERR("Invalid HT rate idx %d\n", idx);
495 idx = IL_LAST_OFDM_RATE;
496 }
497 rate_n_flags = RATE_MCS_HT_MSK;
498
499 if (is_siso(tbl->lq_type))
500 rate_n_flags |= il_rates[idx].plcp_siso;
501 else
502 rate_n_flags |= il_rates[idx].plcp_mimo2;
503 } else {
504 IL_ERR("Invalid tbl->lq_type %d\n", tbl->lq_type);
505 }
506
507 rate_n_flags |=
508 ((tbl->ant_type << RATE_MCS_ANT_POS) & RATE_MCS_ANT_ABC_MSK);
509
510 if (is_Ht(tbl->lq_type)) {
511 if (tbl->is_ht40) {
512 if (tbl->is_dup)
513 rate_n_flags |= RATE_MCS_DUP_MSK;
514 else
515 rate_n_flags |= RATE_MCS_HT40_MSK;
516 }
517 if (tbl->is_SGI)
518 rate_n_flags |= RATE_MCS_SGI_MSK;
519
520 if (use_green) {
521 rate_n_flags |= RATE_MCS_GF_MSK;
522 if (is_siso(tbl->lq_type) && tbl->is_SGI) {
523 rate_n_flags &= ~RATE_MCS_SGI_MSK;
524 IL_ERR("GF was set with SGI:SISO\n");
525 }
526 }
527 }
528 return rate_n_flags;
529}
530
531/*
532 * Interpret uCode API's rate_n_flags format,
533 * fill "search" or "active" tx mode table.
534 */
535static int
536il4965_rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
537 enum nl80211_band band,
538 struct il_scale_tbl_info *tbl, int *rate_idx)
539{
540 u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK);
541 u8 il4965_num_of_ant =
542 il4965_get_il4965_num_of_ant_from_rate(rate_n_flags);
543 u8 mcs;
544
545 memset(tbl, 0, sizeof(struct il_scale_tbl_info));
546 *rate_idx = il4965_hwrate_to_plcp_idx(rate_n_flags);
547
548 if (*rate_idx == RATE_INVALID) {
549 *rate_idx = -1;
550 return -EINVAL;
551 }
552 tbl->is_SGI = 0; /* default legacy setup */
553 tbl->is_ht40 = 0;
554 tbl->is_dup = 0;
555 tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS);
556 tbl->lq_type = LQ_NONE;
557 tbl->max_search = IL_MAX_SEARCH;
558
559 /* legacy rate format */
560 if (!(rate_n_flags & RATE_MCS_HT_MSK)) {
561 if (il4965_num_of_ant == 1) {
562 if (band == NL80211_BAND_5GHZ)
563 tbl->lq_type = LQ_A;
564 else
565 tbl->lq_type = LQ_G;
566 }
567 /* HT rate format */
568 } else {
569 if (rate_n_flags & RATE_MCS_SGI_MSK)
570 tbl->is_SGI = 1;
571
572 if ((rate_n_flags & RATE_MCS_HT40_MSK) ||
573 (rate_n_flags & RATE_MCS_DUP_MSK))
574 tbl->is_ht40 = 1;
575
576 if (rate_n_flags & RATE_MCS_DUP_MSK)
577 tbl->is_dup = 1;
578
579 mcs = il4965_rs_extract_rate(rate_n_flags);
580
581 /* SISO */
582 if (mcs <= RATE_SISO_60M_PLCP) {
583 if (il4965_num_of_ant == 1)
584 tbl->lq_type = LQ_SISO; /*else NONE */
585 /* MIMO2 */
586 } else {
587 if (il4965_num_of_ant == 2)
588 tbl->lq_type = LQ_MIMO2;
589 }
590 }
591 return 0;
592}
593
594/* switch to another antenna/antennas and return 1 */
595/* if no other valid antenna found, return 0 */
596static int
597il4965_rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
598 struct il_scale_tbl_info *tbl)
599{
600 u8 new_ant_type;
601
602 if (!tbl->ant_type || tbl->ant_type > ANT_ABC)
603 return 0;
604
605 if (!il4965_rs_is_valid_ant(valid_ant, tbl->ant_type))
606 return 0;
607
608 new_ant_type = ant_toggle_lookup[tbl->ant_type];
609
610 while (new_ant_type != tbl->ant_type &&
611 !il4965_rs_is_valid_ant(valid_ant, new_ant_type))
612 new_ant_type = ant_toggle_lookup[new_ant_type];
613
614 if (new_ant_type == tbl->ant_type)
615 return 0;
616
617 tbl->ant_type = new_ant_type;
618 *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK;
619 *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS;
620 return 1;
621}
622
623/*
624 * Green-field mode is valid if the station supports it and
625 * there are no non-GF stations present in the BSS.
626 */
627static bool
628il4965_rs_use_green(struct il_priv *il, struct ieee80211_sta *sta)
629{
630 return (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) &&
631 !il->ht.non_gf_sta_present;
632}
633
634/*
635 * il4965_rs_get_supported_rates - get the available rates
636 *
637 * if management frame or broadcast frame only return
638 * basic available rates.
639 *
640 */
641static u16
642il4965_rs_get_supported_rates(struct il_lq_sta *lq_sta,
643 struct ieee80211_hdr *hdr,
644 enum il_table_type rate_type)
645{
646 if (is_legacy(rate_type)) {
647 return lq_sta->active_legacy_rate;
648 } else {
649 if (is_siso(rate_type))
650 return lq_sta->active_siso_rate;
651 else
652 return lq_sta->active_mimo2_rate;
653 }
654}
655
656static u16
657il4965_rs_get_adjacent_rate(struct il_priv *il, u8 idx, u16 rate_mask,
658 int rate_type)
659{
660 u8 high = RATE_INVALID;
661 u8 low = RATE_INVALID;
662
663 /* 802.11A or ht walks to the next literal adjacent rate in
664 * the rate table */
665 if (is_a_band(rate_type) || !is_legacy(rate_type)) {
666 int i;
667 u32 mask;
668
669 /* Find the previous rate that is in the rate mask */
670 i = idx - 1;
671 for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
672 if (rate_mask & mask) {
673 low = i;
674 break;
675 }
676 }
677
678 /* Find the next rate that is in the rate mask */
679 i = idx + 1;
680 for (mask = (1 << i); i < RATE_COUNT; i++, mask <<= 1) {
681 if (rate_mask & mask) {
682 high = i;
683 break;
684 }
685 }
686
687 return (high << 8) | low;
688 }
689
690 low = idx;
691 while (low != RATE_INVALID) {
692 low = il_rates[low].prev_rs;
693 if (low == RATE_INVALID)
694 break;
695 if (rate_mask & (1 << low))
696 break;
697 D_RATE("Skipping masked lower rate: %d\n", low);
698 }
699
700 high = idx;
701 while (high != RATE_INVALID) {
702 high = il_rates[high].next_rs;
703 if (high == RATE_INVALID)
704 break;
705 if (rate_mask & (1 << high))
706 break;
707 D_RATE("Skipping masked higher rate: %d\n", high);
708 }
709
710 return (high << 8) | low;
711}
712
713static u32
714il4965_rs_get_lower_rate(struct il_lq_sta *lq_sta,
715 struct il_scale_tbl_info *tbl, u8 scale_idx,
716 u8 ht_possible)
717{
718 s32 low;
719 u16 rate_mask;
720 u16 high_low;
721 u8 switch_to_legacy = 0;
722 u8 is_green = lq_sta->is_green;
723 struct il_priv *il = lq_sta->drv;
724
725 /* check if we need to switch from HT to legacy rates.
726 * assumption is that mandatory rates (1Mbps or 6Mbps)
727 * are always supported (spec demand) */
728 if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_idx)) {
729 switch_to_legacy = 1;
730 scale_idx = rs_ht_to_legacy[scale_idx];
731 if (lq_sta->band == NL80211_BAND_5GHZ)
732 tbl->lq_type = LQ_A;
733 else
734 tbl->lq_type = LQ_G;
735
736 if (il4965_num_of_ant(tbl->ant_type) > 1)
737 tbl->ant_type =
738 il4965_first_antenna(il->hw_params.valid_tx_ant);
739
740 tbl->is_ht40 = 0;
741 tbl->is_SGI = 0;
742 tbl->max_search = IL_MAX_SEARCH;
743 }
744
745 rate_mask = il4965_rs_get_supported_rates(lq_sta, NULL, tbl->lq_type);
746
747 /* Mask with station rate restriction */
748 if (is_legacy(tbl->lq_type)) {
749 /* supp_rates has no CCK bits in A mode */
750 if (lq_sta->band == NL80211_BAND_5GHZ)
751 rate_mask =
752 (u16) (rate_mask &
753 (lq_sta->supp_rates << IL_FIRST_OFDM_RATE));
754 else
755 rate_mask = (u16) (rate_mask & lq_sta->supp_rates);
756 }
757
758 /* If we switched from HT to legacy, check current rate */
759 if (switch_to_legacy && (rate_mask & (1 << scale_idx))) {
760 low = scale_idx;
761 goto out;
762 }
763
764 high_low =
765 il4965_rs_get_adjacent_rate(lq_sta->drv, scale_idx, rate_mask,
766 tbl->lq_type);
767 low = high_low & 0xff;
768
769 if (low == RATE_INVALID)
770 low = scale_idx;
771
772out:
773 return il4965_rate_n_flags_from_tbl(lq_sta->drv, tbl, low, is_green);
774}
775
776/*
777 * Simple function to compare two rate scale table types
778 */
779static bool
780il4965_table_type_matches(struct il_scale_tbl_info *a,
781 struct il_scale_tbl_info *b)
782{
783 return (a->lq_type == b->lq_type && a->ant_type == b->ant_type &&
784 a->is_SGI == b->is_SGI);
785}
786
787/*
788 * mac80211 sends us Tx status
789 */
790static void
791il4965_rs_tx_status(void *il_r, struct ieee80211_supported_band *sband,
792 struct ieee80211_sta *sta, void *il_sta,
793 struct sk_buff *skb)
794{
795 int legacy_success;
796 int retries;
797 int rs_idx, mac_idx, i;
798 struct il_lq_sta *lq_sta = il_sta;
799 struct il_link_quality_cmd *table;
800 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
801 struct il_priv *il = (struct il_priv *)il_r;
802 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
803 enum mac80211_rate_control_flags mac_flags;
804 u32 tx_rate;
805 struct il_scale_tbl_info tbl_type;
806 struct il_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl;
807
808 D_RATE("get frame ack response, update rate scale win\n");
809
810 /* Treat uninitialized rate scaling data same as non-existing. */
811 if (!lq_sta) {
812 D_RATE("Station rate scaling not created yet.\n");
813 return;
814 } else if (!lq_sta->drv) {
815 D_RATE("Rate scaling not initialized yet.\n");
816 return;
817 }
818
819 if (!ieee80211_is_data(hdr->frame_control) ||
820 (info->flags & IEEE80211_TX_CTL_NO_ACK))
821 return;
822
823 /* This packet was aggregated but doesn't carry status info */
824 if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
825 !(info->flags & IEEE80211_TX_STAT_AMPDU))
826 return;
827
828 /*
829 * Ignore this Tx frame response if its initial rate doesn't match
830 * that of latest Link Quality command. There may be stragglers
831 * from a previous Link Quality command, but we're no longer interested
832 * in those; they're either from the "active" mode while we're trying
833 * to check "search" mode, or a prior "search" mode after we've moved
834 * to a new "search" mode (which might become the new "active" mode).
835 */
836 table = &lq_sta->lq;
837 tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
838 il4965_rs_get_tbl_info_from_mcs(tx_rate, il->band, &tbl_type, &rs_idx);
839 if (il->band == NL80211_BAND_5GHZ)
840 rs_idx -= IL_FIRST_OFDM_RATE;
841 mac_flags = info->status.rates[0].flags;
842 mac_idx = info->status.rates[0].idx;
843 /* For HT packets, map MCS to PLCP */
844 if (mac_flags & IEEE80211_TX_RC_MCS) {
845 mac_idx &= RATE_MCS_CODE_MSK; /* Remove # of streams */
846 if (mac_idx >= (RATE_9M_IDX - IL_FIRST_OFDM_RATE))
847 mac_idx++;
848 /*
849 * mac80211 HT idx is always zero-idxed; we need to move
850 * HT OFDM rates after CCK rates in 2.4 GHz band
851 */
852 if (il->band == NL80211_BAND_2GHZ)
853 mac_idx += IL_FIRST_OFDM_RATE;
854 }
855 /* Here we actually compare this rate to the latest LQ command */
856 if (mac_idx < 0 ||
857 tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI) ||
858 tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH) ||
859 tbl_type.is_dup != !!(mac_flags & IEEE80211_TX_RC_DUP_DATA) ||
860 tbl_type.ant_type != info->status.antenna ||
861 !!(tx_rate & RATE_MCS_HT_MSK) != !!(mac_flags & IEEE80211_TX_RC_MCS)
862 || !!(tx_rate & RATE_MCS_GF_MSK) !=
863 !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD) || rs_idx != mac_idx) {
864 D_RATE("initial rate %d does not match %d (0x%x)\n", mac_idx,
865 rs_idx, tx_rate);
866 /*
867 * Since rates mis-match, the last LQ command may have failed.
868 * After IL_MISSED_RATE_MAX mis-matches, resync the uCode with
869 * ... driver.
870 */
871 lq_sta->missed_rate_counter++;
872 if (lq_sta->missed_rate_counter > IL_MISSED_RATE_MAX) {
873 lq_sta->missed_rate_counter = 0;
874 il_send_lq_cmd(il, &lq_sta->lq, CMD_ASYNC, false);
875 }
876 /* Regardless, ignore this status info for outdated rate */
877 return;
878 } else
879 /* Rate did match, so reset the missed_rate_counter */
880 lq_sta->missed_rate_counter = 0;
881
882 /* Figure out if rate scale algorithm is in active or search table */
883 if (il4965_table_type_matches
884 (&tbl_type, &(lq_sta->lq_info[lq_sta->active_tbl]))) {
885 curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
886 other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
887 } else
888 if (il4965_table_type_matches
889 (&tbl_type, &lq_sta->lq_info[1 - lq_sta->active_tbl])) {
890 curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
891 other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
892 } else {
893 D_RATE("Neither active nor search matches tx rate\n");
894 tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
895 D_RATE("active- lq:%x, ant:%x, SGI:%d\n", tmp_tbl->lq_type,
896 tmp_tbl->ant_type, tmp_tbl->is_SGI);
897 tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
898 D_RATE("search- lq:%x, ant:%x, SGI:%d\n", tmp_tbl->lq_type,
899 tmp_tbl->ant_type, tmp_tbl->is_SGI);
900 D_RATE("actual- lq:%x, ant:%x, SGI:%d\n", tbl_type.lq_type,
901 tbl_type.ant_type, tbl_type.is_SGI);
902 /*
903 * no matching table found, let's by-pass the data collection
904 * and continue to perform rate scale to find the rate table
905 */
906 il4965_rs_stay_in_table(lq_sta, true);
907 goto done;
908 }
909
910 /*
911 * Updating the frame history depends on whether packets were
912 * aggregated.
913 *
914 * For aggregation, all packets were transmitted at the same rate, the
915 * first idx into rate scale table.
916 */
917 if (info->flags & IEEE80211_TX_STAT_AMPDU) {
918 tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
919 il4965_rs_get_tbl_info_from_mcs(tx_rate, il->band, &tbl_type,
920 &rs_idx);
921 il4965_rs_collect_tx_data(curr_tbl, rs_idx,
922 info->status.ampdu_len,
923 info->status.ampdu_ack_len);
924
925 /* Update success/fail counts if not searching for new mode */
926 if (lq_sta->stay_in_tbl) {
927 lq_sta->total_success += info->status.ampdu_ack_len;
928 lq_sta->total_failed +=
929 (info->status.ampdu_len -
930 info->status.ampdu_ack_len);
931 }
932 } else {
933 /*
934 * For legacy, update frame history with for each Tx retry.
935 */
936 retries = info->status.rates[0].count - 1;
937 /* HW doesn't send more than 15 retries */
938 retries = min(retries, 15);
939
940 /* The last transmission may have been successful */
941 legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK);
942 /* Collect data for each rate used during failed TX attempts */
943 for (i = 0; i <= retries; ++i) {
944 tx_rate = le32_to_cpu(table->rs_table[i].rate_n_flags);
945 il4965_rs_get_tbl_info_from_mcs(tx_rate, il->band,
946 &tbl_type, &rs_idx);
947 /*
948 * Only collect stats if retried rate is in the same RS
949 * table as active/search.
950 */
951 if (il4965_table_type_matches(&tbl_type, curr_tbl))
952 tmp_tbl = curr_tbl;
953 else if (il4965_table_type_matches
954 (&tbl_type, other_tbl))
955 tmp_tbl = other_tbl;
956 else
957 continue;
958 il4965_rs_collect_tx_data(tmp_tbl, rs_idx, 1,
959 i <
960 retries ? 0 : legacy_success);
961 }
962
963 /* Update success/fail counts if not searching for new mode */
964 if (lq_sta->stay_in_tbl) {
965 lq_sta->total_success += legacy_success;
966 lq_sta->total_failed += retries + (1 - legacy_success);
967 }
968 }
969 /* The last TX rate is cached in lq_sta; it's set in if/else above */
970 lq_sta->last_rate_n_flags = tx_rate;
971done:
972 /* See if there's a better rate or modulation mode to try. */
973 if (sta->deflink.supp_rates[sband->band])
974 il4965_rs_rate_scale_perform(il, skb, sta, lq_sta);
975}
976
977/*
978 * Begin a period of staying with a selected modulation mode.
979 * Set "stay_in_tbl" flag to prevent any mode switches.
980 * Set frame tx success limits according to legacy vs. high-throughput,
981 * and reset overall (spanning all rates) tx success history stats.
982 * These control how long we stay using same modulation mode before
983 * searching for a new mode.
984 */
985static void
986il4965_rs_set_stay_in_table(struct il_priv *il, u8 is_legacy,
987 struct il_lq_sta *lq_sta)
988{
989 D_RATE("we are staying in the same table\n");
990 lq_sta->stay_in_tbl = 1; /* only place this gets set */
991 if (is_legacy) {
992 lq_sta->table_count_limit = IL_LEGACY_TBL_COUNT;
993 lq_sta->max_failure_limit = IL_LEGACY_FAILURE_LIMIT;
994 lq_sta->max_success_limit = IL_LEGACY_SUCCESS_LIMIT;
995 } else {
996 lq_sta->table_count_limit = IL_NONE_LEGACY_TBL_COUNT;
997 lq_sta->max_failure_limit = IL_NONE_LEGACY_FAILURE_LIMIT;
998 lq_sta->max_success_limit = IL_NONE_LEGACY_SUCCESS_LIMIT;
999 }
1000 lq_sta->table_count = 0;
1001 lq_sta->total_failed = 0;
1002 lq_sta->total_success = 0;
1003 lq_sta->flush_timer = jiffies;
1004 lq_sta->action_counter = 0;
1005}
1006
1007/*
1008 * Find correct throughput table for given mode of modulation
1009 */
1010static void
1011il4965_rs_set_expected_tpt_table(struct il_lq_sta *lq_sta,
1012 struct il_scale_tbl_info *tbl)
1013{
1014 /* Used to choose among HT tables */
1015 s32(*ht_tbl_pointer)[RATE_COUNT];
1016
1017 /* Check for invalid LQ type */
1018 if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) {
1019 tbl->expected_tpt = expected_tpt_legacy;
1020 return;
1021 }
1022
1023 /* Legacy rates have only one table */
1024 if (is_legacy(tbl->lq_type)) {
1025 tbl->expected_tpt = expected_tpt_legacy;
1026 return;
1027 }
1028
1029 /* Choose among many HT tables depending on number of streams
1030 * (SISO/MIMO2), channel width (20/40), SGI, and aggregation
1031 * status */
1032 if (is_siso(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
1033 ht_tbl_pointer = expected_tpt_siso20MHz;
1034 else if (is_siso(tbl->lq_type))
1035 ht_tbl_pointer = expected_tpt_siso40MHz;
1036 else if (is_mimo2(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
1037 ht_tbl_pointer = expected_tpt_mimo2_20MHz;
1038 else /* if (is_mimo2(tbl->lq_type)) <-- must be true */
1039 ht_tbl_pointer = expected_tpt_mimo2_40MHz;
1040
1041 if (!tbl->is_SGI && !lq_sta->is_agg) /* Normal */
1042 tbl->expected_tpt = ht_tbl_pointer[0];
1043 else if (tbl->is_SGI && !lq_sta->is_agg) /* SGI */
1044 tbl->expected_tpt = ht_tbl_pointer[1];
1045 else if (!tbl->is_SGI && lq_sta->is_agg) /* AGG */
1046 tbl->expected_tpt = ht_tbl_pointer[2];
1047 else /* AGG+SGI */
1048 tbl->expected_tpt = ht_tbl_pointer[3];
1049}
1050
1051/*
1052 * Find starting rate for new "search" high-throughput mode of modulation.
1053 * Goal is to find lowest expected rate (under perfect conditions) that is
1054 * above the current measured throughput of "active" mode, to give new mode
1055 * a fair chance to prove itself without too many challenges.
1056 *
1057 * This gets called when transitioning to more aggressive modulation
1058 * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive
1059 * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need
1060 * to decrease to match "active" throughput. When moving from MIMO to SISO,
1061 * bit rate will typically need to increase, but not if performance was bad.
1062 */
1063static s32
1064il4965_rs_get_best_rate(struct il_priv *il, struct il_lq_sta *lq_sta,
1065 struct il_scale_tbl_info *tbl, /* "search" */
1066 u16 rate_mask, s8 idx)
1067{
1068 /* "active" values */
1069 struct il_scale_tbl_info *active_tbl =
1070 &(lq_sta->lq_info[lq_sta->active_tbl]);
1071 s32 active_sr = active_tbl->win[idx].success_ratio;
1072 s32 active_tpt = active_tbl->expected_tpt[idx];
1073
1074 /* expected "search" throughput */
1075 s32 *tpt_tbl = tbl->expected_tpt;
1076
1077 s32 new_rate, high, low, start_hi;
1078 u16 high_low;
1079 s8 rate = idx;
1080
1081 new_rate = high = low = start_hi = RATE_INVALID;
1082
1083 for (;;) {
1084 high_low =
1085 il4965_rs_get_adjacent_rate(il, rate, rate_mask,
1086 tbl->lq_type);
1087
1088 low = high_low & 0xff;
1089 high = (high_low >> 8) & 0xff;
1090
1091 /*
1092 * Lower the "search" bit rate, to give new "search" mode
1093 * approximately the same throughput as "active" if:
1094 *
1095 * 1) "Active" mode has been working modestly well (but not
1096 * great), and expected "search" throughput (under perfect
1097 * conditions) at candidate rate is above the actual
1098 * measured "active" throughput (but less than expected
1099 * "active" throughput under perfect conditions).
1100 * OR
1101 * 2) "Active" mode has been working perfectly or very well
1102 * and expected "search" throughput (under perfect
1103 * conditions) at candidate rate is above expected
1104 * "active" throughput (under perfect conditions).
1105 */
1106 if ((100 * tpt_tbl[rate] > lq_sta->last_tpt &&
1107 (active_sr > RATE_DECREASE_TH && active_sr <= RATE_HIGH_TH
1108 && tpt_tbl[rate] <= active_tpt)) ||
1109 (active_sr >= RATE_SCALE_SWITCH &&
1110 tpt_tbl[rate] > active_tpt)) {
1111
1112 /* (2nd or later pass)
1113 * If we've already tried to raise the rate, and are
1114 * now trying to lower it, use the higher rate. */
1115 if (start_hi != RATE_INVALID) {
1116 new_rate = start_hi;
1117 break;
1118 }
1119
1120 new_rate = rate;
1121
1122 /* Loop again with lower rate */
1123 if (low != RATE_INVALID)
1124 rate = low;
1125
1126 /* Lower rate not available, use the original */
1127 else
1128 break;
1129
1130 /* Else try to raise the "search" rate to match "active" */
1131 } else {
1132 /* (2nd or later pass)
1133 * If we've already tried to lower the rate, and are
1134 * now trying to raise it, use the lower rate. */
1135 if (new_rate != RATE_INVALID)
1136 break;
1137
1138 /* Loop again with higher rate */
1139 else if (high != RATE_INVALID) {
1140 start_hi = high;
1141 rate = high;
1142
1143 /* Higher rate not available, use the original */
1144 } else {
1145 new_rate = rate;
1146 break;
1147 }
1148 }
1149 }
1150
1151 return new_rate;
1152}
1153
1154/*
1155 * Set up search table for MIMO2
1156 */
1157static int
1158il4965_rs_switch_to_mimo2(struct il_priv *il, struct il_lq_sta *lq_sta,
1159 struct ieee80211_conf *conf,
1160 struct ieee80211_sta *sta,
1161 struct il_scale_tbl_info *tbl, int idx)
1162{
1163 u16 rate_mask;
1164 s32 rate;
1165 s8 is_green = lq_sta->is_green;
1166
1167 if (!conf_is_ht(conf) || !sta->deflink.ht_cap.ht_supported)
1168 return -1;
1169
1170 if (sta->deflink.smps_mode == IEEE80211_SMPS_STATIC)
1171 return -1;
1172
1173 /* Need both Tx chains/antennas to support MIMO */
1174 if (il->hw_params.tx_chains_num < 2)
1175 return -1;
1176
1177 D_RATE("LQ: try to switch to MIMO2\n");
1178
1179 tbl->lq_type = LQ_MIMO2;
1180 tbl->is_dup = lq_sta->is_dup;
1181 tbl->action = 0;
1182 tbl->max_search = IL_MAX_SEARCH;
1183 rate_mask = lq_sta->active_mimo2_rate;
1184
1185 if (il_is_ht40_tx_allowed(il, &sta->deflink.ht_cap))
1186 tbl->is_ht40 = 1;
1187 else
1188 tbl->is_ht40 = 0;
1189
1190 il4965_rs_set_expected_tpt_table(lq_sta, tbl);
1191
1192 rate = il4965_rs_get_best_rate(il, lq_sta, tbl, rate_mask, idx);
1193
1194 D_RATE("LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask);
1195 if (rate == RATE_INVALID || !((1 << rate) & rate_mask)) {
1196 D_RATE("Can't switch with idx %d rate mask %x\n", rate,
1197 rate_mask);
1198 return -1;
1199 }
1200 tbl->current_rate =
1201 il4965_rate_n_flags_from_tbl(il, tbl, rate, is_green);
1202
1203 D_RATE("LQ: Switch to new mcs %X idx is green %X\n", tbl->current_rate,
1204 is_green);
1205 return 0;
1206}
1207
1208/*
1209 * Set up search table for SISO
1210 */
1211static int
1212il4965_rs_switch_to_siso(struct il_priv *il, struct il_lq_sta *lq_sta,
1213 struct ieee80211_conf *conf, struct ieee80211_sta *sta,
1214 struct il_scale_tbl_info *tbl, int idx)
1215{
1216 u16 rate_mask;
1217 u8 is_green = lq_sta->is_green;
1218 s32 rate;
1219
1220 if (!conf_is_ht(conf) || !sta->deflink.ht_cap.ht_supported)
1221 return -1;
1222
1223 D_RATE("LQ: try to switch to SISO\n");
1224
1225 tbl->is_dup = lq_sta->is_dup;
1226 tbl->lq_type = LQ_SISO;
1227 tbl->action = 0;
1228 tbl->max_search = IL_MAX_SEARCH;
1229 rate_mask = lq_sta->active_siso_rate;
1230
1231 if (il_is_ht40_tx_allowed(il, &sta->deflink.ht_cap))
1232 tbl->is_ht40 = 1;
1233 else
1234 tbl->is_ht40 = 0;
1235
1236 if (is_green)
1237 tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield */
1238
1239 il4965_rs_set_expected_tpt_table(lq_sta, tbl);
1240 rate = il4965_rs_get_best_rate(il, lq_sta, tbl, rate_mask, idx);
1241
1242 D_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask);
1243 if (rate == RATE_INVALID || !((1 << rate) & rate_mask)) {
1244 D_RATE("can not switch with idx %d rate mask %x\n", rate,
1245 rate_mask);
1246 return -1;
1247 }
1248 tbl->current_rate =
1249 il4965_rate_n_flags_from_tbl(il, tbl, rate, is_green);
1250 D_RATE("LQ: Switch to new mcs %X idx is green %X\n", tbl->current_rate,
1251 is_green);
1252 return 0;
1253}
1254
1255/*
1256 * Try to switch to new modulation mode from legacy
1257 */
1258static int
1259il4965_rs_move_legacy_other(struct il_priv *il, struct il_lq_sta *lq_sta,
1260 struct ieee80211_conf *conf,
1261 struct ieee80211_sta *sta, int idx)
1262{
1263 struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1264 struct il_scale_tbl_info *search_tbl =
1265 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1266 struct il_rate_scale_data *win = &(tbl->win[idx]);
1267 u32 sz =
1268 (sizeof(struct il_scale_tbl_info) -
1269 (sizeof(struct il_rate_scale_data) * RATE_COUNT));
1270 u8 start_action;
1271 u8 valid_tx_ant = il->hw_params.valid_tx_ant;
1272 u8 tx_chains_num = il->hw_params.tx_chains_num;
1273 int ret = 0;
1274 u8 update_search_tbl_counter = 0;
1275
1276 tbl->action = IL_LEGACY_SWITCH_SISO;
1277
1278 start_action = tbl->action;
1279 for (;;) {
1280 lq_sta->action_counter++;
1281 switch (tbl->action) {
1282 case IL_LEGACY_SWITCH_ANTENNA1:
1283 case IL_LEGACY_SWITCH_ANTENNA2:
1284 D_RATE("LQ: Legacy toggle Antenna\n");
1285
1286 if ((tbl->action == IL_LEGACY_SWITCH_ANTENNA1 &&
1287 tx_chains_num <= 1) ||
1288 (tbl->action == IL_LEGACY_SWITCH_ANTENNA2 &&
1289 tx_chains_num <= 2))
1290 break;
1291
1292 /* Don't change antenna if success has been great */
1293 if (win->success_ratio >= IL_RS_GOOD_RATIO)
1294 break;
1295
1296 /* Set up search table to try other antenna */
1297 memcpy(search_tbl, tbl, sz);
1298
1299 if (il4965_rs_toggle_antenna
1300 (valid_tx_ant, &search_tbl->current_rate,
1301 search_tbl)) {
1302 update_search_tbl_counter = 1;
1303 il4965_rs_set_expected_tpt_table(lq_sta,
1304 search_tbl);
1305 goto out;
1306 }
1307 break;
1308 case IL_LEGACY_SWITCH_SISO:
1309 D_RATE("LQ: Legacy switch to SISO\n");
1310
1311 /* Set up search table to try SISO */
1312 memcpy(search_tbl, tbl, sz);
1313 search_tbl->is_SGI = 0;
1314 ret =
1315 il4965_rs_switch_to_siso(il, lq_sta, conf, sta,
1316 search_tbl, idx);
1317 if (!ret) {
1318 lq_sta->action_counter = 0;
1319 goto out;
1320 }
1321
1322 break;
1323 case IL_LEGACY_SWITCH_MIMO2_AB:
1324 case IL_LEGACY_SWITCH_MIMO2_AC:
1325 case IL_LEGACY_SWITCH_MIMO2_BC:
1326 D_RATE("LQ: Legacy switch to MIMO2\n");
1327
1328 /* Set up search table to try MIMO */
1329 memcpy(search_tbl, tbl, sz);
1330 search_tbl->is_SGI = 0;
1331
1332 if (tbl->action == IL_LEGACY_SWITCH_MIMO2_AB)
1333 search_tbl->ant_type = ANT_AB;
1334 else if (tbl->action == IL_LEGACY_SWITCH_MIMO2_AC)
1335 search_tbl->ant_type = ANT_AC;
1336 else
1337 search_tbl->ant_type = ANT_BC;
1338
1339 if (!il4965_rs_is_valid_ant
1340 (valid_tx_ant, search_tbl->ant_type))
1341 break;
1342
1343 ret =
1344 il4965_rs_switch_to_mimo2(il, lq_sta, conf, sta,
1345 search_tbl, idx);
1346 if (!ret) {
1347 lq_sta->action_counter = 0;
1348 goto out;
1349 }
1350 break;
1351 }
1352 tbl->action++;
1353 if (tbl->action > IL_LEGACY_SWITCH_MIMO2_BC)
1354 tbl->action = IL_LEGACY_SWITCH_ANTENNA1;
1355
1356 if (tbl->action == start_action)
1357 break;
1358
1359 }
1360 search_tbl->lq_type = LQ_NONE;
1361 return 0;
1362
1363out:
1364 lq_sta->search_better_tbl = 1;
1365 tbl->action++;
1366 if (tbl->action > IL_LEGACY_SWITCH_MIMO2_BC)
1367 tbl->action = IL_LEGACY_SWITCH_ANTENNA1;
1368 if (update_search_tbl_counter)
1369 search_tbl->action = tbl->action;
1370 return 0;
1371
1372}
1373
1374/*
1375 * Try to switch to new modulation mode from SISO
1376 */
1377static int
1378il4965_rs_move_siso_to_other(struct il_priv *il, struct il_lq_sta *lq_sta,
1379 struct ieee80211_conf *conf,
1380 struct ieee80211_sta *sta, int idx)
1381{
1382 u8 is_green = lq_sta->is_green;
1383 struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1384 struct il_scale_tbl_info *search_tbl =
1385 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1386 struct il_rate_scale_data *win = &(tbl->win[idx]);
1387 struct ieee80211_sta_ht_cap *ht_cap = &sta->deflink.ht_cap;
1388 u32 sz =
1389 (sizeof(struct il_scale_tbl_info) -
1390 (sizeof(struct il_rate_scale_data) * RATE_COUNT));
1391 u8 start_action;
1392 u8 valid_tx_ant = il->hw_params.valid_tx_ant;
1393 u8 tx_chains_num = il->hw_params.tx_chains_num;
1394 u8 update_search_tbl_counter = 0;
1395 int ret;
1396
1397 start_action = tbl->action;
1398
1399 for (;;) {
1400 lq_sta->action_counter++;
1401 switch (tbl->action) {
1402 case IL_SISO_SWITCH_ANTENNA1:
1403 case IL_SISO_SWITCH_ANTENNA2:
1404 D_RATE("LQ: SISO toggle Antenna\n");
1405 if ((tbl->action == IL_SISO_SWITCH_ANTENNA1 &&
1406 tx_chains_num <= 1) ||
1407 (tbl->action == IL_SISO_SWITCH_ANTENNA2 &&
1408 tx_chains_num <= 2))
1409 break;
1410
1411 if (win->success_ratio >= IL_RS_GOOD_RATIO)
1412 break;
1413
1414 memcpy(search_tbl, tbl, sz);
1415 if (il4965_rs_toggle_antenna
1416 (valid_tx_ant, &search_tbl->current_rate,
1417 search_tbl)) {
1418 update_search_tbl_counter = 1;
1419 goto out;
1420 }
1421 break;
1422 case IL_SISO_SWITCH_MIMO2_AB:
1423 case IL_SISO_SWITCH_MIMO2_AC:
1424 case IL_SISO_SWITCH_MIMO2_BC:
1425 D_RATE("LQ: SISO switch to MIMO2\n");
1426 memcpy(search_tbl, tbl, sz);
1427 search_tbl->is_SGI = 0;
1428
1429 if (tbl->action == IL_SISO_SWITCH_MIMO2_AB)
1430 search_tbl->ant_type = ANT_AB;
1431 else if (tbl->action == IL_SISO_SWITCH_MIMO2_AC)
1432 search_tbl->ant_type = ANT_AC;
1433 else
1434 search_tbl->ant_type = ANT_BC;
1435
1436 if (!il4965_rs_is_valid_ant
1437 (valid_tx_ant, search_tbl->ant_type))
1438 break;
1439
1440 ret =
1441 il4965_rs_switch_to_mimo2(il, lq_sta, conf, sta,
1442 search_tbl, idx);
1443 if (!ret)
1444 goto out;
1445 break;
1446 case IL_SISO_SWITCH_GI:
1447 if (!tbl->is_ht40 &&
1448 !(ht_cap->cap & IEEE80211_HT_CAP_SGI_20))
1449 break;
1450 if (tbl->is_ht40 &&
1451 !(ht_cap->cap & IEEE80211_HT_CAP_SGI_40))
1452 break;
1453
1454 D_RATE("LQ: SISO toggle SGI/NGI\n");
1455
1456 memcpy(search_tbl, tbl, sz);
1457 if (is_green) {
1458 if (!tbl->is_SGI)
1459 break;
1460 else
1461 IL_ERR("SGI was set in GF+SISO\n");
1462 }
1463 search_tbl->is_SGI = !tbl->is_SGI;
1464 il4965_rs_set_expected_tpt_table(lq_sta, search_tbl);
1465 if (tbl->is_SGI) {
1466 s32 tpt = lq_sta->last_tpt / 100;
1467 if (tpt >= search_tbl->expected_tpt[idx])
1468 break;
1469 }
1470 search_tbl->current_rate =
1471 il4965_rate_n_flags_from_tbl(il, search_tbl, idx,
1472 is_green);
1473 update_search_tbl_counter = 1;
1474 goto out;
1475 }
1476 tbl->action++;
1477 if (tbl->action > IL_SISO_SWITCH_GI)
1478 tbl->action = IL_SISO_SWITCH_ANTENNA1;
1479
1480 if (tbl->action == start_action)
1481 break;
1482 }
1483 search_tbl->lq_type = LQ_NONE;
1484 return 0;
1485
1486out:
1487 lq_sta->search_better_tbl = 1;
1488 tbl->action++;
1489 if (tbl->action > IL_SISO_SWITCH_GI)
1490 tbl->action = IL_SISO_SWITCH_ANTENNA1;
1491 if (update_search_tbl_counter)
1492 search_tbl->action = tbl->action;
1493
1494 return 0;
1495}
1496
1497/*
1498 * Try to switch to new modulation mode from MIMO2
1499 */
1500static int
1501il4965_rs_move_mimo2_to_other(struct il_priv *il, struct il_lq_sta *lq_sta,
1502 struct ieee80211_conf *conf,
1503 struct ieee80211_sta *sta, int idx)
1504{
1505 s8 is_green = lq_sta->is_green;
1506 struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1507 struct il_scale_tbl_info *search_tbl =
1508 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1509 struct il_rate_scale_data *win = &(tbl->win[idx]);
1510 struct ieee80211_sta_ht_cap *ht_cap = &sta->deflink.ht_cap;
1511 u32 sz =
1512 (sizeof(struct il_scale_tbl_info) -
1513 (sizeof(struct il_rate_scale_data) * RATE_COUNT));
1514 u8 start_action;
1515 u8 valid_tx_ant = il->hw_params.valid_tx_ant;
1516 u8 tx_chains_num = il->hw_params.tx_chains_num;
1517 u8 update_search_tbl_counter = 0;
1518 int ret;
1519
1520 start_action = tbl->action;
1521 for (;;) {
1522 lq_sta->action_counter++;
1523 switch (tbl->action) {
1524 case IL_MIMO2_SWITCH_ANTENNA1:
1525 case IL_MIMO2_SWITCH_ANTENNA2:
1526 D_RATE("LQ: MIMO2 toggle Antennas\n");
1527
1528 if (tx_chains_num <= 2)
1529 break;
1530
1531 if (win->success_ratio >= IL_RS_GOOD_RATIO)
1532 break;
1533
1534 memcpy(search_tbl, tbl, sz);
1535 if (il4965_rs_toggle_antenna
1536 (valid_tx_ant, &search_tbl->current_rate,
1537 search_tbl)) {
1538 update_search_tbl_counter = 1;
1539 goto out;
1540 }
1541 break;
1542 case IL_MIMO2_SWITCH_SISO_A:
1543 case IL_MIMO2_SWITCH_SISO_B:
1544 case IL_MIMO2_SWITCH_SISO_C:
1545 D_RATE("LQ: MIMO2 switch to SISO\n");
1546
1547 /* Set up new search table for SISO */
1548 memcpy(search_tbl, tbl, sz);
1549
1550 if (tbl->action == IL_MIMO2_SWITCH_SISO_A)
1551 search_tbl->ant_type = ANT_A;
1552 else if (tbl->action == IL_MIMO2_SWITCH_SISO_B)
1553 search_tbl->ant_type = ANT_B;
1554 else
1555 search_tbl->ant_type = ANT_C;
1556
1557 if (!il4965_rs_is_valid_ant
1558 (valid_tx_ant, search_tbl->ant_type))
1559 break;
1560
1561 ret =
1562 il4965_rs_switch_to_siso(il, lq_sta, conf, sta,
1563 search_tbl, idx);
1564 if (!ret)
1565 goto out;
1566
1567 break;
1568
1569 case IL_MIMO2_SWITCH_GI:
1570 if (!tbl->is_ht40 &&
1571 !(ht_cap->cap & IEEE80211_HT_CAP_SGI_20))
1572 break;
1573 if (tbl->is_ht40 &&
1574 !(ht_cap->cap & IEEE80211_HT_CAP_SGI_40))
1575 break;
1576
1577 D_RATE("LQ: MIMO2 toggle SGI/NGI\n");
1578
1579 /* Set up new search table for MIMO2 */
1580 memcpy(search_tbl, tbl, sz);
1581 search_tbl->is_SGI = !tbl->is_SGI;
1582 il4965_rs_set_expected_tpt_table(lq_sta, search_tbl);
1583 /*
1584 * If active table already uses the fastest possible
1585 * modulation (dual stream with short guard interval),
1586 * and it's working well, there's no need to look
1587 * for a better type of modulation!
1588 */
1589 if (tbl->is_SGI) {
1590 s32 tpt = lq_sta->last_tpt / 100;
1591 if (tpt >= search_tbl->expected_tpt[idx])
1592 break;
1593 }
1594 search_tbl->current_rate =
1595 il4965_rate_n_flags_from_tbl(il, search_tbl, idx,
1596 is_green);
1597 update_search_tbl_counter = 1;
1598 goto out;
1599
1600 }
1601 tbl->action++;
1602 if (tbl->action > IL_MIMO2_SWITCH_GI)
1603 tbl->action = IL_MIMO2_SWITCH_ANTENNA1;
1604
1605 if (tbl->action == start_action)
1606 break;
1607 }
1608 search_tbl->lq_type = LQ_NONE;
1609 return 0;
1610out:
1611 lq_sta->search_better_tbl = 1;
1612 tbl->action++;
1613 if (tbl->action > IL_MIMO2_SWITCH_GI)
1614 tbl->action = IL_MIMO2_SWITCH_ANTENNA1;
1615 if (update_search_tbl_counter)
1616 search_tbl->action = tbl->action;
1617
1618 return 0;
1619
1620}
1621
1622/*
1623 * Check whether we should continue using same modulation mode, or
1624 * begin search for a new mode, based on:
1625 * 1) # tx successes or failures while using this mode
1626 * 2) # times calling this function
1627 * 3) elapsed time in this mode (not used, for now)
1628 */
1629static void
1630il4965_rs_stay_in_table(struct il_lq_sta *lq_sta, bool force_search)
1631{
1632 struct il_scale_tbl_info *tbl;
1633 int i;
1634 int active_tbl;
1635 int flush_interval_passed = 0;
1636 struct il_priv *il;
1637
1638 il = lq_sta->drv;
1639 active_tbl = lq_sta->active_tbl;
1640
1641 tbl = &(lq_sta->lq_info[active_tbl]);
1642
1643 /* If we've been disallowing search, see if we should now allow it */
1644 if (lq_sta->stay_in_tbl) {
1645
1646 /* Elapsed time using current modulation mode */
1647 if (lq_sta->flush_timer)
1648 flush_interval_passed =
1649 time_after(jiffies,
1650 (unsigned long)(lq_sta->flush_timer +
1651 RATE_SCALE_FLUSH_INTVL));
1652
1653 /*
1654 * Check if we should allow search for new modulation mode.
1655 * If many frames have failed or succeeded, or we've used
1656 * this same modulation for a long time, allow search, and
1657 * reset history stats that keep track of whether we should
1658 * allow a new search. Also (below) reset all bitmaps and
1659 * stats in active history.
1660 */
1661 if (force_search ||
1662 lq_sta->total_failed > lq_sta->max_failure_limit ||
1663 lq_sta->total_success > lq_sta->max_success_limit ||
1664 (!lq_sta->search_better_tbl && lq_sta->flush_timer &&
1665 flush_interval_passed)) {
1666 D_RATE("LQ: stay is expired %d %d %d\n",
1667 lq_sta->total_failed, lq_sta->total_success,
1668 flush_interval_passed);
1669
1670 /* Allow search for new mode */
1671 lq_sta->stay_in_tbl = 0; /* only place reset */
1672 lq_sta->total_failed = 0;
1673 lq_sta->total_success = 0;
1674 lq_sta->flush_timer = 0;
1675
1676 /*
1677 * Else if we've used this modulation mode enough repetitions
1678 * (regardless of elapsed time or success/failure), reset
1679 * history bitmaps and rate-specific stats for all rates in
1680 * active table.
1681 */
1682 } else {
1683 lq_sta->table_count++;
1684 if (lq_sta->table_count >= lq_sta->table_count_limit) {
1685 lq_sta->table_count = 0;
1686
1687 D_RATE("LQ: stay in table clear win\n");
1688 for (i = 0; i < RATE_COUNT; i++)
1689 il4965_rs_rate_scale_clear_win(&
1690 (tbl->
1691 win
1692 [i]));
1693 }
1694 }
1695
1696 /* If transitioning to allow "search", reset all history
1697 * bitmaps and stats in active table (this will become the new
1698 * "search" table). */
1699 if (!lq_sta->stay_in_tbl) {
1700 for (i = 0; i < RATE_COUNT; i++)
1701 il4965_rs_rate_scale_clear_win(&(tbl->win[i]));
1702 }
1703 }
1704}
1705
1706/*
1707 * setup rate table in uCode
1708 */
1709static void
1710il4965_rs_update_rate_tbl(struct il_priv *il, struct il_lq_sta *lq_sta,
1711 struct il_scale_tbl_info *tbl, int idx, u8 is_green)
1712{
1713 u32 rate;
1714
1715 /* Update uCode's rate table. */
1716 rate = il4965_rate_n_flags_from_tbl(il, tbl, idx, is_green);
1717 il4965_rs_fill_link_cmd(il, lq_sta, rate);
1718 il_send_lq_cmd(il, &lq_sta->lq, CMD_ASYNC, false);
1719}
1720
1721/*
1722 * Do rate scaling and search for new modulation mode.
1723 */
1724static void
1725il4965_rs_rate_scale_perform(struct il_priv *il, struct sk_buff *skb,
1726 struct ieee80211_sta *sta,
1727 struct il_lq_sta *lq_sta)
1728{
1729 struct ieee80211_hw *hw = il->hw;
1730 struct ieee80211_conf *conf = &hw->conf;
1731 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1732 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
1733 int low = RATE_INVALID;
1734 int high = RATE_INVALID;
1735 int idx;
1736 int i;
1737 struct il_rate_scale_data *win = NULL;
1738 int current_tpt = IL_INVALID_VALUE;
1739 int low_tpt = IL_INVALID_VALUE;
1740 int high_tpt = IL_INVALID_VALUE;
1741 u32 fail_count;
1742 s8 scale_action = 0;
1743 u16 rate_mask;
1744 u8 update_lq = 0;
1745 struct il_scale_tbl_info *tbl, *tbl1;
1746 u16 rate_scale_idx_msk = 0;
1747 u8 is_green = 0;
1748 u8 active_tbl = 0;
1749 u8 done_search = 0;
1750 u16 high_low;
1751 s32 sr;
1752 u8 tid;
1753 struct il_tid_data *tid_data;
1754
1755 D_RATE("rate scale calculate new rate for skb\n");
1756
1757 /* Send management frames and NO_ACK data using lowest rate. */
1758 /* TODO: this could probably be improved.. */
1759 if (!ieee80211_is_data(hdr->frame_control) ||
1760 (info->flags & IEEE80211_TX_CTL_NO_ACK))
1761 return;
1762
1763 lq_sta->supp_rates = sta->deflink.supp_rates[lq_sta->band];
1764
1765 tid = il4965_rs_tl_add_packet(lq_sta, hdr);
1766 if (tid != MAX_TID_COUNT && (lq_sta->tx_agg_tid_en & (1 << tid))) {
1767 tid_data = &il->stations[lq_sta->lq.sta_id].tid[tid];
1768 if (tid_data->agg.state == IL_AGG_OFF)
1769 lq_sta->is_agg = 0;
1770 else
1771 lq_sta->is_agg = 1;
1772 } else
1773 lq_sta->is_agg = 0;
1774
1775 /*
1776 * Select rate-scale / modulation-mode table to work with in
1777 * the rest of this function: "search" if searching for better
1778 * modulation mode, or "active" if doing rate scaling within a mode.
1779 */
1780 if (!lq_sta->search_better_tbl)
1781 active_tbl = lq_sta->active_tbl;
1782 else
1783 active_tbl = 1 - lq_sta->active_tbl;
1784
1785 tbl = &(lq_sta->lq_info[active_tbl]);
1786 if (is_legacy(tbl->lq_type))
1787 lq_sta->is_green = 0;
1788 else
1789 lq_sta->is_green = il4965_rs_use_green(il, sta);
1790 is_green = lq_sta->is_green;
1791
1792 /* current tx rate */
1793 idx = lq_sta->last_txrate_idx;
1794
1795 D_RATE("Rate scale idx %d for type %d\n", idx, tbl->lq_type);
1796
1797 /* rates available for this association, and for modulation mode */
1798 rate_mask = il4965_rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
1799
1800 D_RATE("mask 0x%04X\n", rate_mask);
1801
1802 /* mask with station rate restriction */
1803 if (is_legacy(tbl->lq_type)) {
1804 if (lq_sta->band == NL80211_BAND_5GHZ)
1805 /* supp_rates has no CCK bits in A mode */
1806 rate_scale_idx_msk =
1807 (u16) (rate_mask &
1808 (lq_sta->supp_rates << IL_FIRST_OFDM_RATE));
1809 else
1810 rate_scale_idx_msk =
1811 (u16) (rate_mask & lq_sta->supp_rates);
1812
1813 } else
1814 rate_scale_idx_msk = rate_mask;
1815
1816 if (!rate_scale_idx_msk)
1817 rate_scale_idx_msk = rate_mask;
1818
1819 if (!((1 << idx) & rate_scale_idx_msk)) {
1820 IL_ERR("Current Rate is not valid\n");
1821 if (lq_sta->search_better_tbl) {
1822 /* revert to active table if search table is not valid */
1823 tbl->lq_type = LQ_NONE;
1824 lq_sta->search_better_tbl = 0;
1825 tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1826 /* get "active" rate info */
1827 idx = il4965_hwrate_to_plcp_idx(tbl->current_rate);
1828 il4965_rs_update_rate_tbl(il, lq_sta, tbl, idx,
1829 is_green);
1830 }
1831 return;
1832 }
1833
1834 /* Get expected throughput table and history win for current rate */
1835 if (!tbl->expected_tpt) {
1836 IL_ERR("tbl->expected_tpt is NULL\n");
1837 return;
1838 }
1839
1840 /* force user max rate if set by user */
1841 if (lq_sta->max_rate_idx != -1 && lq_sta->max_rate_idx < idx) {
1842 idx = lq_sta->max_rate_idx;
1843 update_lq = 1;
1844 win = &(tbl->win[idx]);
1845 goto lq_update;
1846 }
1847
1848 win = &(tbl->win[idx]);
1849
1850 /*
1851 * If there is not enough history to calculate actual average
1852 * throughput, keep analyzing results of more tx frames, without
1853 * changing rate or mode (bypass most of the rest of this function).
1854 * Set up new rate table in uCode only if old rate is not supported
1855 * in current association (use new rate found above).
1856 */
1857 fail_count = win->counter - win->success_counter;
1858 if (fail_count < RATE_MIN_FAILURE_TH &&
1859 win->success_counter < RATE_MIN_SUCCESS_TH) {
1860 D_RATE("LQ: still below TH. succ=%d total=%d " "for idx %d\n",
1861 win->success_counter, win->counter, idx);
1862
1863 /* Can't calculate this yet; not enough history */
1864 win->average_tpt = IL_INVALID_VALUE;
1865
1866 /* Should we stay with this modulation mode,
1867 * or search for a new one? */
1868 il4965_rs_stay_in_table(lq_sta, false);
1869
1870 goto out;
1871 }
1872 /* Else we have enough samples; calculate estimate of
1873 * actual average throughput */
1874 if (win->average_tpt !=
1875 ((win->success_ratio * tbl->expected_tpt[idx] + 64) / 128)) {
1876 IL_ERR("expected_tpt should have been calculated by now\n");
1877 win->average_tpt =
1878 ((win->success_ratio * tbl->expected_tpt[idx] + 64) / 128);
1879 }
1880
1881 /* If we are searching for better modulation mode, check success. */
1882 if (lq_sta->search_better_tbl) {
1883 /* If good success, continue using the "search" mode;
1884 * no need to send new link quality command, since we're
1885 * continuing to use the setup that we've been trying. */
1886 if (win->average_tpt > lq_sta->last_tpt) {
1887
1888 D_RATE("LQ: SWITCHING TO NEW TBL "
1889 "suc=%d cur-tpt=%d old-tpt=%d\n",
1890 win->success_ratio, win->average_tpt,
1891 lq_sta->last_tpt);
1892
1893 if (!is_legacy(tbl->lq_type))
1894 lq_sta->enable_counter = 1;
1895
1896 /* Swap tables; "search" becomes "active" */
1897 lq_sta->active_tbl = active_tbl;
1898 current_tpt = win->average_tpt;
1899
1900 /* Else poor success; go back to mode in "active" table */
1901 } else {
1902
1903 D_RATE("LQ: GOING BACK TO THE OLD TBL "
1904 "suc=%d cur-tpt=%d old-tpt=%d\n",
1905 win->success_ratio, win->average_tpt,
1906 lq_sta->last_tpt);
1907
1908 /* Nullify "search" table */
1909 tbl->lq_type = LQ_NONE;
1910
1911 /* Revert to "active" table */
1912 active_tbl = lq_sta->active_tbl;
1913 tbl = &(lq_sta->lq_info[active_tbl]);
1914
1915 /* Revert to "active" rate and throughput info */
1916 idx = il4965_hwrate_to_plcp_idx(tbl->current_rate);
1917 current_tpt = lq_sta->last_tpt;
1918
1919 /* Need to set up a new rate table in uCode */
1920 update_lq = 1;
1921 }
1922
1923 /* Either way, we've made a decision; modulation mode
1924 * search is done, allow rate adjustment next time. */
1925 lq_sta->search_better_tbl = 0;
1926 done_search = 1; /* Don't switch modes below! */
1927 goto lq_update;
1928 }
1929
1930 /* (Else) not in search of better modulation mode, try for better
1931 * starting rate, while staying in this mode. */
1932 high_low =
1933 il4965_rs_get_adjacent_rate(il, idx, rate_scale_idx_msk,
1934 tbl->lq_type);
1935 low = high_low & 0xff;
1936 high = (high_low >> 8) & 0xff;
1937
1938 /* If user set max rate, dont allow higher than user constrain */
1939 if (lq_sta->max_rate_idx != -1 && lq_sta->max_rate_idx < high)
1940 high = RATE_INVALID;
1941
1942 sr = win->success_ratio;
1943
1944 /* Collect measured throughputs for current and adjacent rates */
1945 current_tpt = win->average_tpt;
1946 if (low != RATE_INVALID)
1947 low_tpt = tbl->win[low].average_tpt;
1948 if (high != RATE_INVALID)
1949 high_tpt = tbl->win[high].average_tpt;
1950
1951 scale_action = 0;
1952
1953 /* Too many failures, decrease rate */
1954 if (sr <= RATE_DECREASE_TH || current_tpt == 0) {
1955 D_RATE("decrease rate because of low success_ratio\n");
1956 scale_action = -1;
1957
1958 /* No throughput measured yet for adjacent rates; try increase. */
1959 } else if (low_tpt == IL_INVALID_VALUE && high_tpt == IL_INVALID_VALUE) {
1960
1961 if (high != RATE_INVALID && sr >= RATE_INCREASE_TH)
1962 scale_action = 1;
1963 else if (low != RATE_INVALID)
1964 scale_action = 0;
1965 }
1966
1967 /* Both adjacent throughputs are measured, but neither one has better
1968 * throughput; we're using the best rate, don't change it! */
1969 else if (low_tpt != IL_INVALID_VALUE && high_tpt != IL_INVALID_VALUE &&
1970 low_tpt < current_tpt && high_tpt < current_tpt)
1971 scale_action = 0;
1972
1973 /* At least one adjacent rate's throughput is measured,
1974 * and may have better performance. */
1975 else {
1976 /* Higher adjacent rate's throughput is measured */
1977 if (high_tpt != IL_INVALID_VALUE) {
1978 /* Higher rate has better throughput */
1979 if (high_tpt > current_tpt && sr >= RATE_INCREASE_TH)
1980 scale_action = 1;
1981 else
1982 scale_action = 0;
1983
1984 /* Lower adjacent rate's throughput is measured */
1985 } else if (low_tpt != IL_INVALID_VALUE) {
1986 /* Lower rate has better throughput */
1987 if (low_tpt > current_tpt) {
1988 D_RATE("decrease rate because of low tpt\n");
1989 scale_action = -1;
1990 } else if (sr >= RATE_INCREASE_TH) {
1991 scale_action = 1;
1992 }
1993 }
1994 }
1995
1996 /* Sanity check; asked for decrease, but success rate or throughput
1997 * has been good at old rate. Don't change it. */
1998 if (scale_action == -1 && low != RATE_INVALID &&
1999 (sr > RATE_HIGH_TH || current_tpt > 100 * tbl->expected_tpt[low]))
2000 scale_action = 0;
2001
2002 switch (scale_action) {
2003 case -1:
2004 /* Decrease starting rate, update uCode's rate table */
2005 if (low != RATE_INVALID) {
2006 update_lq = 1;
2007 idx = low;
2008 }
2009
2010 break;
2011 case 1:
2012 /* Increase starting rate, update uCode's rate table */
2013 if (high != RATE_INVALID) {
2014 update_lq = 1;
2015 idx = high;
2016 }
2017
2018 break;
2019 case 0:
2020 /* No change */
2021 default:
2022 break;
2023 }
2024
2025 D_RATE("choose rate scale idx %d action %d low %d " "high %d type %d\n",
2026 idx, scale_action, low, high, tbl->lq_type);
2027
2028lq_update:
2029 /* Replace uCode's rate table for the destination station. */
2030 if (update_lq)
2031 il4965_rs_update_rate_tbl(il, lq_sta, tbl, idx, is_green);
2032
2033 /* Should we stay with this modulation mode,
2034 * or search for a new one? */
2035 il4965_rs_stay_in_table(lq_sta, false);
2036
2037 /*
2038 * Search for new modulation mode if we're:
2039 * 1) Not changing rates right now
2040 * 2) Not just finishing up a search
2041 * 3) Allowing a new search
2042 */
2043 if (!update_lq && !done_search && !lq_sta->stay_in_tbl && win->counter) {
2044 /* Save current throughput to compare with "search" throughput */
2045 lq_sta->last_tpt = current_tpt;
2046
2047 /* Select a new "search" modulation mode to try.
2048 * If one is found, set up the new "search" table. */
2049 if (is_legacy(tbl->lq_type))
2050 il4965_rs_move_legacy_other(il, lq_sta, conf, sta, idx);
2051 else if (is_siso(tbl->lq_type))
2052 il4965_rs_move_siso_to_other(il, lq_sta, conf, sta,
2053 idx);
2054 else /* (is_mimo2(tbl->lq_type)) */
2055 il4965_rs_move_mimo2_to_other(il, lq_sta, conf, sta,
2056 idx);
2057
2058 /* If new "search" mode was selected, set up in uCode table */
2059 if (lq_sta->search_better_tbl) {
2060 /* Access the "search" table, clear its history. */
2061 tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
2062 for (i = 0; i < RATE_COUNT; i++)
2063 il4965_rs_rate_scale_clear_win(&(tbl->win[i]));
2064
2065 /* Use new "search" start rate */
2066 idx = il4965_hwrate_to_plcp_idx(tbl->current_rate);
2067
2068 D_RATE("Switch current mcs: %X idx: %d\n",
2069 tbl->current_rate, idx);
2070 il4965_rs_fill_link_cmd(il, lq_sta, tbl->current_rate);
2071 il_send_lq_cmd(il, &lq_sta->lq, CMD_ASYNC, false);
2072 } else
2073 done_search = 1;
2074 }
2075
2076 if (done_search && !lq_sta->stay_in_tbl) {
2077 /* If the "active" (non-search) mode was legacy,
2078 * and we've tried switching antennas,
2079 * but we haven't been able to try HT modes (not available),
2080 * stay with best antenna legacy modulation for a while
2081 * before next round of mode comparisons. */
2082 tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
2083 if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) &&
2084 lq_sta->action_counter > tbl1->max_search) {
2085 D_RATE("LQ: STAY in legacy table\n");
2086 il4965_rs_set_stay_in_table(il, 1, lq_sta);
2087 }
2088
2089 /* If we're in an HT mode, and all 3 mode switch actions
2090 * have been tried and compared, stay in this best modulation
2091 * mode for a while before next round of mode comparisons. */
2092 if (lq_sta->enable_counter &&
2093 lq_sta->action_counter >= tbl1->max_search) {
2094 if (lq_sta->last_tpt > IL_AGG_TPT_THREHOLD &&
2095 (lq_sta->tx_agg_tid_en & (1 << tid)) &&
2096 tid != MAX_TID_COUNT) {
2097 tid_data =
2098 &il->stations[lq_sta->lq.sta_id].tid[tid];
2099 if (tid_data->agg.state == IL_AGG_OFF) {
2100 D_RATE("try to aggregate tid %d\n",
2101 tid);
2102 il4965_rs_tl_turn_on_agg(il, tid,
2103 lq_sta, sta);
2104 }
2105 }
2106 il4965_rs_set_stay_in_table(il, 0, lq_sta);
2107 }
2108 }
2109
2110out:
2111 tbl->current_rate =
2112 il4965_rate_n_flags_from_tbl(il, tbl, idx, is_green);
2113 i = idx;
2114 lq_sta->last_txrate_idx = i;
2115}
2116
2117/*
2118 * il4965_rs_initialize_lq - Initialize a station's hardware rate table
2119 *
2120 * The uCode's station table contains a table of fallback rates
2121 * for automatic fallback during transmission.
2122 *
2123 * NOTE: This sets up a default set of values. These will be replaced later
2124 * if the driver's iwl-4965-rs rate scaling algorithm is used, instead of
2125 * rc80211_simple.
2126 *
2127 * NOTE: Run C_ADD_STA command to set up station table entry, before
2128 * calling this function (which runs C_TX_LINK_QUALITY_CMD,
2129 * which requires station table entry to exist).
2130 */
2131static void
2132il4965_rs_initialize_lq(struct il_priv *il, struct ieee80211_conf *conf,
2133 struct ieee80211_sta *sta, struct il_lq_sta *lq_sta)
2134{
2135 struct il_scale_tbl_info *tbl;
2136 int rate_idx;
2137 int i;
2138 u32 rate;
2139 u8 use_green;
2140 u8 active_tbl = 0;
2141 u8 valid_tx_ant;
2142
2143 if (!sta || !lq_sta)
2144 return;
2145
2146 use_green = il4965_rs_use_green(il, sta);
2147
2148 i = lq_sta->last_txrate_idx;
2149
2150 valid_tx_ant = il->hw_params.valid_tx_ant;
2151
2152 if (!lq_sta->search_better_tbl)
2153 active_tbl = lq_sta->active_tbl;
2154 else
2155 active_tbl = 1 - lq_sta->active_tbl;
2156
2157 tbl = &(lq_sta->lq_info[active_tbl]);
2158
2159 if (i < 0 || i >= RATE_COUNT)
2160 i = 0;
2161
2162 rate = il_rates[i].plcp;
2163 tbl->ant_type = il4965_first_antenna(valid_tx_ant);
2164 rate |= tbl->ant_type << RATE_MCS_ANT_POS;
2165
2166 if (i >= IL_FIRST_CCK_RATE && i <= IL_LAST_CCK_RATE)
2167 rate |= RATE_MCS_CCK_MSK;
2168
2169 il4965_rs_get_tbl_info_from_mcs(rate, il->band, tbl, &rate_idx);
2170 if (!il4965_rs_is_valid_ant(valid_tx_ant, tbl->ant_type))
2171 il4965_rs_toggle_antenna(valid_tx_ant, &rate, tbl);
2172
2173 rate = il4965_rate_n_flags_from_tbl(il, tbl, rate_idx, use_green);
2174 tbl->current_rate = rate;
2175 il4965_rs_set_expected_tpt_table(lq_sta, tbl);
2176 il4965_rs_fill_link_cmd(NULL, lq_sta, rate);
2177 il->stations[lq_sta->lq.sta_id].lq = &lq_sta->lq;
2178 il_send_lq_cmd(il, &lq_sta->lq, CMD_SYNC, true);
2179}
2180
2181static void
2182il4965_rs_get_rate(void *il_r, struct ieee80211_sta *sta, void *il_sta,
2183 struct ieee80211_tx_rate_control *txrc)
2184{
2185
2186 struct sk_buff *skb = txrc->skb;
2187 struct ieee80211_supported_band *sband = txrc->sband;
2188 struct il_priv *il __maybe_unused = (struct il_priv *)il_r;
2189 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
2190 struct il_lq_sta *lq_sta = il_sta;
2191 int rate_idx;
2192
2193 D_RATE("rate scale calculate new rate for skb\n");
2194
2195 /* Get max rate if user set max rate */
2196 if (lq_sta) {
2197 lq_sta->max_rate_idx = fls(txrc->rate_idx_mask) - 1;
2198 if (sband->band == NL80211_BAND_5GHZ &&
2199 lq_sta->max_rate_idx != -1)
2200 lq_sta->max_rate_idx += IL_FIRST_OFDM_RATE;
2201 if (lq_sta->max_rate_idx < 0 ||
2202 lq_sta->max_rate_idx >= RATE_COUNT)
2203 lq_sta->max_rate_idx = -1;
2204 }
2205
2206 /* Treat uninitialized rate scaling data same as non-existing. */
2207 if (lq_sta && !lq_sta->drv) {
2208 D_RATE("Rate scaling not initialized yet.\n");
2209 il_sta = NULL;
2210 }
2211
2212 if (!lq_sta)
2213 return;
2214
2215 rate_idx = lq_sta->last_txrate_idx;
2216
2217 if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) {
2218 rate_idx -= IL_FIRST_OFDM_RATE;
2219 /* 6M and 9M shared same MCS idx */
2220 rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0;
2221 if (il4965_rs_extract_rate(lq_sta->last_rate_n_flags) >=
2222 RATE_MIMO2_6M_PLCP)
2223 rate_idx = rate_idx + MCS_IDX_PER_STREAM;
2224 info->control.rates[0].flags = IEEE80211_TX_RC_MCS;
2225 if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK)
2226 info->control.rates[0].flags |=
2227 IEEE80211_TX_RC_SHORT_GI;
2228 if (lq_sta->last_rate_n_flags & RATE_MCS_DUP_MSK)
2229 info->control.rates[0].flags |=
2230 IEEE80211_TX_RC_DUP_DATA;
2231 if (lq_sta->last_rate_n_flags & RATE_MCS_HT40_MSK)
2232 info->control.rates[0].flags |=
2233 IEEE80211_TX_RC_40_MHZ_WIDTH;
2234 if (lq_sta->last_rate_n_flags & RATE_MCS_GF_MSK)
2235 info->control.rates[0].flags |=
2236 IEEE80211_TX_RC_GREEN_FIELD;
2237 } else {
2238 /* Check for invalid rates */
2239 if (rate_idx < 0 || rate_idx >= RATE_COUNT_LEGACY ||
2240 (sband->band == NL80211_BAND_5GHZ &&
2241 rate_idx < IL_FIRST_OFDM_RATE))
2242 rate_idx = rate_lowest_index(sband, sta);
2243 /* On valid 5 GHz rate, adjust idx */
2244 else if (sband->band == NL80211_BAND_5GHZ)
2245 rate_idx -= IL_FIRST_OFDM_RATE;
2246 info->control.rates[0].flags = 0;
2247 }
2248 info->control.rates[0].idx = rate_idx;
2249 info->control.rates[0].count = 1;
2250}
2251
2252static void *
2253il4965_rs_alloc_sta(void *il_rate, struct ieee80211_sta *sta, gfp_t gfp)
2254{
2255 struct il_station_priv *sta_priv =
2256 (struct il_station_priv *)sta->drv_priv;
2257 struct il_priv *il;
2258
2259 il = (struct il_priv *)il_rate;
2260 D_RATE("create station rate scale win\n");
2261
2262 return &sta_priv->lq_sta;
2263}
2264
2265/*
2266 * Called after adding a new station to initialize rate scaling
2267 */
2268void
2269il4965_rs_rate_init(struct il_priv *il, struct ieee80211_sta *sta, u8 sta_id)
2270{
2271 int i, j;
2272 struct ieee80211_hw *hw = il->hw;
2273 struct ieee80211_conf *conf = &il->hw->conf;
2274 struct ieee80211_sta_ht_cap *ht_cap = &sta->deflink.ht_cap;
2275 struct il_station_priv *sta_priv;
2276 struct il_lq_sta *lq_sta;
2277 struct ieee80211_supported_band *sband;
2278
2279 sta_priv = (struct il_station_priv *)sta->drv_priv;
2280 lq_sta = &sta_priv->lq_sta;
2281 sband = hw->wiphy->bands[conf->chandef.chan->band];
2282
2283 lq_sta->lq.sta_id = sta_id;
2284
2285 for (j = 0; j < LQ_SIZE; j++)
2286 for (i = 0; i < RATE_COUNT; i++)
2287 il4965_rs_rate_scale_clear_win(&lq_sta->lq_info[j].
2288 win[i]);
2289
2290 lq_sta->flush_timer = 0;
2291 lq_sta->supp_rates = sta->deflink.supp_rates[sband->band];
2292 for (j = 0; j < LQ_SIZE; j++)
2293 for (i = 0; i < RATE_COUNT; i++)
2294 il4965_rs_rate_scale_clear_win(&lq_sta->lq_info[j].
2295 win[i]);
2296
2297 D_RATE("LQ:" "*** rate scale station global init for station %d ***\n",
2298 sta_id);
2299 /* TODO: what is a good starting rate for STA? About middle? Maybe not
2300 * the lowest or the highest rate.. Could consider using RSSI from
2301 * previous packets? Need to have IEEE 802.1X auth succeed immediately
2302 * after assoc.. */
2303
2304 lq_sta->is_dup = 0;
2305 lq_sta->max_rate_idx = -1;
2306 lq_sta->missed_rate_counter = IL_MISSED_RATE_MAX;
2307 lq_sta->is_green = il4965_rs_use_green(il, sta);
2308 lq_sta->active_legacy_rate = il->active_rate & ~(0x1000);
2309 lq_sta->band = il->band;
2310 /*
2311 * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
2312 * supp_rates[] does not; shift to convert format, force 9 MBits off.
2313 */
2314 lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1;
2315 lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1;
2316 lq_sta->active_siso_rate &= ~((u16) 0x2);
2317 lq_sta->active_siso_rate <<= IL_FIRST_OFDM_RATE;
2318
2319 /* Same here */
2320 lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1;
2321 lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1;
2322 lq_sta->active_mimo2_rate &= ~((u16) 0x2);
2323 lq_sta->active_mimo2_rate <<= IL_FIRST_OFDM_RATE;
2324
2325 /* These values will be overridden later */
2326 lq_sta->lq.general_params.single_stream_ant_msk =
2327 il4965_first_antenna(il->hw_params.valid_tx_ant);
2328 lq_sta->lq.general_params.dual_stream_ant_msk =
2329 il->hw_params.valid_tx_ant & ~il4965_first_antenna(il->hw_params.
2330 valid_tx_ant);
2331 if (!lq_sta->lq.general_params.dual_stream_ant_msk) {
2332 lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB;
2333 } else if (il4965_num_of_ant(il->hw_params.valid_tx_ant) == 2) {
2334 lq_sta->lq.general_params.dual_stream_ant_msk =
2335 il->hw_params.valid_tx_ant;
2336 }
2337
2338 /* as default allow aggregation for all tids */
2339 lq_sta->tx_agg_tid_en = IL_AGG_ALL_TID;
2340 lq_sta->drv = il;
2341
2342 /* Set last_txrate_idx to lowest rate */
2343 lq_sta->last_txrate_idx = rate_lowest_index(sband, sta);
2344 if (sband->band == NL80211_BAND_5GHZ)
2345 lq_sta->last_txrate_idx += IL_FIRST_OFDM_RATE;
2346 lq_sta->is_agg = 0;
2347
2348#ifdef CONFIG_MAC80211_DEBUGFS
2349 lq_sta->dbg_fixed_rate = 0;
2350#endif
2351
2352 il4965_rs_initialize_lq(il, conf, sta, lq_sta);
2353}
2354
2355static void
2356il4965_rs_fill_link_cmd(struct il_priv *il, struct il_lq_sta *lq_sta,
2357 u32 new_rate)
2358{
2359 struct il_scale_tbl_info tbl_type;
2360 int idx = 0;
2361 int rate_idx;
2362 int repeat_rate = 0;
2363 u8 ant_toggle_cnt = 0;
2364 u8 use_ht_possible = 1;
2365 u8 valid_tx_ant = 0;
2366 struct il_link_quality_cmd *lq_cmd = &lq_sta->lq;
2367
2368 /* Override starting rate (idx 0) if needed for debug purposes */
2369 il4965_rs_dbgfs_set_mcs(lq_sta, &new_rate, idx);
2370
2371 /* Interpret new_rate (rate_n_flags) */
2372 il4965_rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type,
2373 &rate_idx);
2374
2375 /* How many times should we repeat the initial rate? */
2376 if (is_legacy(tbl_type.lq_type)) {
2377 ant_toggle_cnt = 1;
2378 repeat_rate = IL_NUMBER_TRY;
2379 } else {
2380 repeat_rate = IL_HT_NUMBER_TRY;
2381 }
2382
2383 lq_cmd->general_params.mimo_delimiter =
2384 is_mimo(tbl_type.lq_type) ? 1 : 0;
2385
2386 /* Fill 1st table entry (idx 0) */
2387 lq_cmd->rs_table[idx].rate_n_flags = cpu_to_le32(new_rate);
2388
2389 if (il4965_num_of_ant(tbl_type.ant_type) == 1) {
2390 lq_cmd->general_params.single_stream_ant_msk =
2391 tbl_type.ant_type;
2392 } else if (il4965_num_of_ant(tbl_type.ant_type) == 2) {
2393 lq_cmd->general_params.dual_stream_ant_msk = tbl_type.ant_type;
2394 }
2395 /* otherwise we don't modify the existing value */
2396 idx++;
2397 repeat_rate--;
2398 if (il)
2399 valid_tx_ant = il->hw_params.valid_tx_ant;
2400
2401 /* Fill rest of rate table */
2402 while (idx < LINK_QUAL_MAX_RETRY_NUM) {
2403 /* Repeat initial/next rate.
2404 * For legacy IL_NUMBER_TRY == 1, this loop will not execute.
2405 * For HT IL_HT_NUMBER_TRY == 3, this executes twice. */
2406 while (repeat_rate > 0 && idx < (LINK_QUAL_MAX_RETRY_NUM - 1)) {
2407 if (is_legacy(tbl_type.lq_type)) {
2408 if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
2409 ant_toggle_cnt++;
2410 else if (il &&
2411 il4965_rs_toggle_antenna(valid_tx_ant,
2412 &new_rate,
2413 &tbl_type))
2414 ant_toggle_cnt = 1;
2415 }
2416
2417 /* Override next rate if needed for debug purposes */
2418 il4965_rs_dbgfs_set_mcs(lq_sta, &new_rate, idx);
2419
2420 /* Fill next table entry */
2421 lq_cmd->rs_table[idx].rate_n_flags =
2422 cpu_to_le32(new_rate);
2423 repeat_rate--;
2424 idx++;
2425 }
2426
2427 il4965_rs_get_tbl_info_from_mcs(new_rate, lq_sta->band,
2428 &tbl_type, &rate_idx);
2429
2430 /* Indicate to uCode which entries might be MIMO.
2431 * If initial rate was MIMO, this will finally end up
2432 * as (IL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
2433 if (is_mimo(tbl_type.lq_type))
2434 lq_cmd->general_params.mimo_delimiter = idx;
2435
2436 /* Get next rate */
2437 new_rate =
2438 il4965_rs_get_lower_rate(lq_sta, &tbl_type, rate_idx,
2439 use_ht_possible);
2440
2441 /* How many times should we repeat the next rate? */
2442 if (is_legacy(tbl_type.lq_type)) {
2443 if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
2444 ant_toggle_cnt++;
2445 else if (il &&
2446 il4965_rs_toggle_antenna(valid_tx_ant,
2447 &new_rate, &tbl_type))
2448 ant_toggle_cnt = 1;
2449
2450 repeat_rate = IL_NUMBER_TRY;
2451 } else {
2452 repeat_rate = IL_HT_NUMBER_TRY;
2453 }
2454
2455 /* Don't allow HT rates after next pass.
2456 * il4965_rs_get_lower_rate() will change type to LQ_A or LQ_G. */
2457 use_ht_possible = 0;
2458
2459 /* Override next rate if needed for debug purposes */
2460 il4965_rs_dbgfs_set_mcs(lq_sta, &new_rate, idx);
2461
2462 /* Fill next table entry */
2463 lq_cmd->rs_table[idx].rate_n_flags = cpu_to_le32(new_rate);
2464
2465 idx++;
2466 repeat_rate--;
2467 }
2468
2469 lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
2470 lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
2471
2472 lq_cmd->agg_params.agg_time_limit =
2473 cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
2474}
2475
2476static void *
2477il4965_rs_alloc(struct ieee80211_hw *hw)
2478{
2479 return hw->priv;
2480}
2481
2482/* rate scale requires free function to be implemented */
2483static void
2484il4965_rs_free(void *il_rate)
2485{
2486 return;
2487}
2488
2489static void
2490il4965_rs_free_sta(void *il_r, struct ieee80211_sta *sta, void *il_sta)
2491{
2492 struct il_priv *il __maybe_unused = il_r;
2493
2494 D_RATE("enter\n");
2495 D_RATE("leave\n");
2496}
2497
2498#ifdef CONFIG_MAC80211_DEBUGFS
2499
2500static void
2501il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta, u32 * rate_n_flags, int idx)
2502{
2503 struct il_priv *il;
2504 u8 valid_tx_ant;
2505 u8 ant_sel_tx;
2506
2507 il = lq_sta->drv;
2508 valid_tx_ant = il->hw_params.valid_tx_ant;
2509 if (lq_sta->dbg_fixed_rate) {
2510 ant_sel_tx =
2511 ((lq_sta->
2512 dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK) >>
2513 RATE_MCS_ANT_POS);
2514 if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) {
2515 *rate_n_flags = lq_sta->dbg_fixed_rate;
2516 D_RATE("Fixed rate ON\n");
2517 } else {
2518 lq_sta->dbg_fixed_rate = 0;
2519 IL_ERR
2520 ("Invalid antenna selection 0x%X, Valid is 0x%X\n",
2521 ant_sel_tx, valid_tx_ant);
2522 D_RATE("Fixed rate OFF\n");
2523 }
2524 } else {
2525 D_RATE("Fixed rate OFF\n");
2526 }
2527}
2528
2529static ssize_t
2530il4965_rs_sta_dbgfs_scale_table_write(struct file *file,
2531 const char __user *user_buf,
2532 size_t count, loff_t *ppos)
2533{
2534 struct il_lq_sta *lq_sta = file->private_data;
2535 struct il_priv *il;
2536 char buf[64];
2537 size_t buf_size;
2538 u32 parsed_rate;
2539
2540 il = lq_sta->drv;
2541 memset(buf, 0, sizeof(buf));
2542 buf_size = min(count, sizeof(buf) - 1);
2543 if (copy_from_user(buf, user_buf, buf_size))
2544 return -EFAULT;
2545
2546 if (sscanf(buf, "%x", &parsed_rate) == 1)
2547 lq_sta->dbg_fixed_rate = parsed_rate;
2548 else
2549 lq_sta->dbg_fixed_rate = 0;
2550
2551 lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */
2552 lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
2553 lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
2554
2555 D_RATE("sta_id %d rate 0x%X\n", lq_sta->lq.sta_id,
2556 lq_sta->dbg_fixed_rate);
2557
2558 if (lq_sta->dbg_fixed_rate) {
2559 il4965_rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate);
2560 il_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC, false);
2561 }
2562
2563 return count;
2564}
2565
2566static ssize_t
2567il4965_rs_sta_dbgfs_scale_table_read(struct file *file, char __user *user_buf,
2568 size_t count, loff_t *ppos)
2569{
2570 char *buff;
2571 int desc = 0;
2572 int i = 0;
2573 int idx = 0;
2574 ssize_t ret;
2575
2576 struct il_lq_sta *lq_sta = file->private_data;
2577 struct il_priv *il;
2578 struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
2579
2580 il = lq_sta->drv;
2581 buff = kmalloc(1024, GFP_KERNEL);
2582 if (!buff)
2583 return -ENOMEM;
2584
2585 desc += sprintf(buff + desc, "sta_id %d\n", lq_sta->lq.sta_id);
2586 desc +=
2587 sprintf(buff + desc, "failed=%d success=%d rate=0%X\n",
2588 lq_sta->total_failed, lq_sta->total_success,
2589 lq_sta->active_legacy_rate);
2590 desc +=
2591 sprintf(buff + desc, "fixed rate 0x%X\n", lq_sta->dbg_fixed_rate);
2592 desc +=
2593 sprintf(buff + desc, "valid_tx_ant %s%s%s\n",
2594 (il->hw_params.valid_tx_ant & ANT_A) ? "ANT_A," : "",
2595 (il->hw_params.valid_tx_ant & ANT_B) ? "ANT_B," : "",
2596 (il->hw_params.valid_tx_ant & ANT_C) ? "ANT_C" : "");
2597 desc +=
2598 sprintf(buff + desc, "lq type %s\n",
2599 (is_legacy(tbl->lq_type)) ? "legacy" : "HT");
2600 if (is_Ht(tbl->lq_type)) {
2601 desc +=
2602 sprintf(buff + desc, " %s",
2603 (is_siso(tbl->lq_type)) ? "SISO" : "MIMO2");
2604 desc +=
2605 sprintf(buff + desc, " %s",
2606 (tbl->is_ht40) ? "40MHz" : "20MHz");
2607 desc +=
2608 sprintf(buff + desc, " %s %s %s\n",
2609 (tbl->is_SGI) ? "SGI" : "",
2610 (lq_sta->is_green) ? "GF enabled" : "",
2611 (lq_sta->is_agg) ? "AGG on" : "");
2612 }
2613 desc +=
2614 sprintf(buff + desc, "last tx rate=0x%X\n",
2615 lq_sta->last_rate_n_flags);
2616 desc +=
2617 sprintf(buff + desc,
2618 "general:" "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
2619 lq_sta->lq.general_params.flags,
2620 lq_sta->lq.general_params.mimo_delimiter,
2621 lq_sta->lq.general_params.single_stream_ant_msk,
2622 lq_sta->lq.general_params.dual_stream_ant_msk);
2623
2624 desc +=
2625 sprintf(buff + desc,
2626 "agg:"
2627 "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n",
2628 le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit),
2629 lq_sta->lq.agg_params.agg_dis_start_th,
2630 lq_sta->lq.agg_params.agg_frame_cnt_limit);
2631
2632 desc +=
2633 sprintf(buff + desc,
2634 "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n",
2635 lq_sta->lq.general_params.start_rate_idx[0],
2636 lq_sta->lq.general_params.start_rate_idx[1],
2637 lq_sta->lq.general_params.start_rate_idx[2],
2638 lq_sta->lq.general_params.start_rate_idx[3]);
2639
2640 for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
2641 idx =
2642 il4965_hwrate_to_plcp_idx(le32_to_cpu
2643 (lq_sta->lq.rs_table[i].
2644 rate_n_flags));
2645 if (is_legacy(tbl->lq_type)) {
2646 desc +=
2647 sprintf(buff + desc, " rate[%d] 0x%X %smbps\n", i,
2648 le32_to_cpu(lq_sta->lq.rs_table[i].
2649 rate_n_flags),
2650 il_rate_mcs[idx].mbps);
2651 } else {
2652 desc +=
2653 sprintf(buff + desc, " rate[%d] 0x%X %smbps (%s)\n",
2654 i,
2655 le32_to_cpu(lq_sta->lq.rs_table[i].
2656 rate_n_flags),
2657 il_rate_mcs[idx].mbps,
2658 il_rate_mcs[idx].mcs);
2659 }
2660 }
2661
2662 ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
2663 kfree(buff);
2664 return ret;
2665}
2666
2667static const struct file_operations rs_sta_dbgfs_scale_table_ops = {
2668 .write = il4965_rs_sta_dbgfs_scale_table_write,
2669 .read = il4965_rs_sta_dbgfs_scale_table_read,
2670 .open = simple_open,
2671 .llseek = default_llseek,
2672};
2673
2674static ssize_t
2675il4965_rs_sta_dbgfs_stats_table_read(struct file *file, char __user *user_buf,
2676 size_t count, loff_t *ppos)
2677{
2678 char *buff;
2679 int desc = 0;
2680 int i, j;
2681 ssize_t ret;
2682
2683 struct il_lq_sta *lq_sta = file->private_data;
2684
2685 buff = kmalloc(1024, GFP_KERNEL);
2686 if (!buff)
2687 return -ENOMEM;
2688
2689 for (i = 0; i < LQ_SIZE; i++) {
2690 desc +=
2691 sprintf(buff + desc,
2692 "%s type=%d SGI=%d HT40=%d DUP=%d GF=%d\n"
2693 "rate=0x%X\n", lq_sta->active_tbl == i ? "*" : "x",
2694 lq_sta->lq_info[i].lq_type,
2695 lq_sta->lq_info[i].is_SGI,
2696 lq_sta->lq_info[i].is_ht40,
2697 lq_sta->lq_info[i].is_dup, lq_sta->is_green,
2698 lq_sta->lq_info[i].current_rate);
2699 for (j = 0; j < RATE_COUNT; j++) {
2700 desc +=
2701 sprintf(buff + desc,
2702 "counter=%d success=%d %%=%d\n",
2703 lq_sta->lq_info[i].win[j].counter,
2704 lq_sta->lq_info[i].win[j].success_counter,
2705 lq_sta->lq_info[i].win[j].success_ratio);
2706 }
2707 }
2708 ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
2709 kfree(buff);
2710 return ret;
2711}
2712
2713static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
2714 .read = il4965_rs_sta_dbgfs_stats_table_read,
2715 .open = simple_open,
2716 .llseek = default_llseek,
2717};
2718
2719static ssize_t
2720il4965_rs_sta_dbgfs_rate_scale_data_read(struct file *file,
2721 char __user *user_buf, size_t count,
2722 loff_t *ppos)
2723{
2724 char buff[120];
2725 int desc = 0;
2726 struct il_lq_sta *lq_sta = file->private_data;
2727 struct il_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl];
2728
2729 if (is_Ht(tbl->lq_type))
2730 desc +=
2731 sprintf(buff + desc, "Bit Rate= %d Mb/s\n",
2732 tbl->expected_tpt[lq_sta->last_txrate_idx]);
2733 else
2734 desc +=
2735 sprintf(buff + desc, "Bit Rate= %d Mb/s\n",
2736 il_rates[lq_sta->last_txrate_idx].ieee >> 1);
2737
2738 return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
2739}
2740
2741static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = {
2742 .read = il4965_rs_sta_dbgfs_rate_scale_data_read,
2743 .open = simple_open,
2744 .llseek = default_llseek,
2745};
2746
2747static void
2748il4965_rs_add_debugfs(void *il, void *il_sta, struct dentry *dir)
2749{
2750 struct il_lq_sta *lq_sta = il_sta;
2751
2752 debugfs_create_file("rate_scale_table", 0600, dir, lq_sta,
2753 &rs_sta_dbgfs_scale_table_ops);
2754 debugfs_create_file("rate_stats_table", 0400, dir, lq_sta,
2755 &rs_sta_dbgfs_stats_table_ops);
2756 debugfs_create_file("rate_scale_data", 0400, dir, lq_sta,
2757 &rs_sta_dbgfs_rate_scale_data_ops);
2758 debugfs_create_u8("tx_agg_tid_enable", 0600, dir,
2759 &lq_sta->tx_agg_tid_en);
2760}
2761#endif
2762
2763/*
2764 * Initialization of rate scaling information is done by driver after
2765 * the station is added. Since mac80211 calls this function before a
2766 * station is added we ignore it.
2767 */
2768static void
2769il4965_rs_rate_init_stub(void *il_r, struct ieee80211_supported_band *sband,
2770 struct cfg80211_chan_def *chandef,
2771 struct ieee80211_sta *sta, void *il_sta)
2772{
2773}
2774
2775static const struct rate_control_ops rs_4965_ops = {
2776 .name = IL4965_RS_NAME,
2777 .tx_status = il4965_rs_tx_status,
2778 .get_rate = il4965_rs_get_rate,
2779 .rate_init = il4965_rs_rate_init_stub,
2780 .alloc = il4965_rs_alloc,
2781 .free = il4965_rs_free,
2782 .alloc_sta = il4965_rs_alloc_sta,
2783 .free_sta = il4965_rs_free_sta,
2784#ifdef CONFIG_MAC80211_DEBUGFS
2785 .add_sta_debugfs = il4965_rs_add_debugfs,
2786#endif
2787};
2788
2789int
2790il4965_rate_control_register(void)
2791{
2792 return ieee80211_rate_control_register(&rs_4965_ops);
2793}
2794
2795void
2796il4965_rate_control_unregister(void)
2797{
2798 ieee80211_rate_control_unregister(&rs_4965_ops);
2799}
1/******************************************************************************
2 *
3 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17 *
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
20 *
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24 *
25 *****************************************************************************/
26#include <linux/kernel.h>
27#include <linux/skbuff.h>
28#include <linux/slab.h>
29#include <net/mac80211.h>
30
31#include <linux/netdevice.h>
32#include <linux/etherdevice.h>
33#include <linux/delay.h>
34
35#include <linux/workqueue.h>
36
37#include "common.h"
38#include "4965.h"
39
40#define IL4965_RS_NAME "iwl-4965-rs"
41
42#define NUM_TRY_BEFORE_ANT_TOGGLE 1
43#define IL_NUMBER_TRY 1
44#define IL_HT_NUMBER_TRY 3
45
46#define RATE_MAX_WINDOW 62 /* # tx in history win */
47#define RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */
48#define RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */
49
50/* max allowed rate miss before sync LQ cmd */
51#define IL_MISSED_RATE_MAX 15
52/* max time to accum history 2 seconds */
53#define RATE_SCALE_FLUSH_INTVL (3*HZ)
54
55static u8 rs_ht_to_legacy[] = {
56 RATE_6M_IDX, RATE_6M_IDX,
57 RATE_6M_IDX, RATE_6M_IDX,
58 RATE_6M_IDX,
59 RATE_6M_IDX, RATE_9M_IDX,
60 RATE_12M_IDX, RATE_18M_IDX,
61 RATE_24M_IDX, RATE_36M_IDX,
62 RATE_48M_IDX, RATE_54M_IDX
63};
64
65static const u8 ant_toggle_lookup[] = {
66 /*ANT_NONE -> */ ANT_NONE,
67 /*ANT_A -> */ ANT_B,
68 /*ANT_B -> */ ANT_C,
69 /*ANT_AB -> */ ANT_BC,
70 /*ANT_C -> */ ANT_A,
71 /*ANT_AC -> */ ANT_AB,
72 /*ANT_BC -> */ ANT_AC,
73 /*ANT_ABC -> */ ANT_ABC,
74};
75
76#define IL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
77 [RATE_##r##M_IDX] = { RATE_##r##M_PLCP, \
78 RATE_SISO_##s##M_PLCP, \
79 RATE_MIMO2_##s##M_PLCP,\
80 RATE_##r##M_IEEE, \
81 RATE_##ip##M_IDX, \
82 RATE_##in##M_IDX, \
83 RATE_##rp##M_IDX, \
84 RATE_##rn##M_IDX, \
85 RATE_##pp##M_IDX, \
86 RATE_##np##M_IDX }
87
88/*
89 * Parameter order:
90 * rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
91 *
92 * If there isn't a valid next or previous rate then INV is used which
93 * maps to RATE_INVALID
94 *
95 */
96const struct il_rate_info il_rates[RATE_COUNT] = {
97 IL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
98 IL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
99 IL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
100 IL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */
101 IL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
102 IL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
103 IL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
104 IL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
105 IL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
106 IL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
107 IL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
108 IL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
109 IL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
110};
111
112static int
113il4965_hwrate_to_plcp_idx(u32 rate_n_flags)
114{
115 int idx = 0;
116
117 /* HT rate format */
118 if (rate_n_flags & RATE_MCS_HT_MSK) {
119 idx = (rate_n_flags & 0xff);
120
121 if (idx >= RATE_MIMO2_6M_PLCP)
122 idx = idx - RATE_MIMO2_6M_PLCP;
123
124 idx += IL_FIRST_OFDM_RATE;
125 /* skip 9M not supported in ht */
126 if (idx >= RATE_9M_IDX)
127 idx += 1;
128 if (idx >= IL_FIRST_OFDM_RATE && idx <= IL_LAST_OFDM_RATE)
129 return idx;
130
131 /* legacy rate format, search for match in table */
132 } else {
133 for (idx = 0; idx < ARRAY_SIZE(il_rates); idx++)
134 if (il_rates[idx].plcp == (rate_n_flags & 0xFF))
135 return idx;
136 }
137
138 return -1;
139}
140
141static void il4965_rs_rate_scale_perform(struct il_priv *il,
142 struct sk_buff *skb,
143 struct ieee80211_sta *sta,
144 struct il_lq_sta *lq_sta);
145static void il4965_rs_fill_link_cmd(struct il_priv *il,
146 struct il_lq_sta *lq_sta, u32 rate_n_flags);
147static void il4965_rs_stay_in_table(struct il_lq_sta *lq_sta,
148 bool force_search);
149
150#ifdef CONFIG_MAC80211_DEBUGFS
151static void il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta,
152 u32 *rate_n_flags, int idx);
153#else
154static void
155il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta, u32 * rate_n_flags, int idx)
156{
157}
158#endif
159
160/**
161 * The following tables contain the expected throughput metrics for all rates
162 *
163 * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
164 *
165 * where invalid entries are zeros.
166 *
167 * CCK rates are only valid in legacy table and will only be used in G
168 * (2.4 GHz) band.
169 */
170
171static s32 expected_tpt_legacy[RATE_COUNT] = {
172 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0
173};
174
175static s32 expected_tpt_siso20MHz[4][RATE_COUNT] = {
176 {0, 0, 0, 0, 42, 0, 76, 102, 124, 158, 183, 193, 202}, /* Norm */
177 {0, 0, 0, 0, 46, 0, 82, 110, 132, 167, 192, 202, 210}, /* SGI */
178 {0, 0, 0, 0, 48, 0, 93, 135, 176, 251, 319, 351, 381}, /* AGG */
179 {0, 0, 0, 0, 53, 0, 102, 149, 193, 275, 348, 381, 413}, /* AGG+SGI */
180};
181
182static s32 expected_tpt_siso40MHz[4][RATE_COUNT] = {
183 {0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */
184 {0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */
185 {0, 0, 0, 0, 96, 0, 182, 259, 328, 451, 553, 598, 640}, /* AGG */
186 {0, 0, 0, 0, 106, 0, 199, 282, 357, 487, 593, 640, 683}, /* AGG+SGI */
187};
188
189static s32 expected_tpt_mimo2_20MHz[4][RATE_COUNT] = {
190 {0, 0, 0, 0, 74, 0, 123, 155, 179, 213, 235, 243, 250}, /* Norm */
191 {0, 0, 0, 0, 81, 0, 131, 164, 187, 221, 242, 250, 256}, /* SGI */
192 {0, 0, 0, 0, 92, 0, 175, 250, 317, 436, 534, 578, 619}, /* AGG */
193 {0, 0, 0, 0, 102, 0, 192, 273, 344, 470, 573, 619, 660}, /* AGG+SGI */
194};
195
196static s32 expected_tpt_mimo2_40MHz[4][RATE_COUNT] = {
197 {0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */
198 {0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */
199 {0, 0, 0, 0, 180, 0, 327, 446, 545, 708, 828, 878, 922}, /* AGG */
200 {0, 0, 0, 0, 197, 0, 355, 481, 584, 752, 872, 922, 966}, /* AGG+SGI */
201};
202
203/* mbps, mcs */
204static const struct il_rate_mcs_info il_rate_mcs[RATE_COUNT] = {
205 {"1", "BPSK DSSS"},
206 {"2", "QPSK DSSS"},
207 {"5.5", "BPSK CCK"},
208 {"11", "QPSK CCK"},
209 {"6", "BPSK 1/2"},
210 {"9", "BPSK 1/2"},
211 {"12", "QPSK 1/2"},
212 {"18", "QPSK 3/4"},
213 {"24", "16QAM 1/2"},
214 {"36", "16QAM 3/4"},
215 {"48", "64QAM 2/3"},
216 {"54", "64QAM 3/4"},
217 {"60", "64QAM 5/6"},
218};
219
220#define MCS_IDX_PER_STREAM (8)
221
222static inline u8
223il4965_rs_extract_rate(u32 rate_n_flags)
224{
225 return (u8) (rate_n_flags & 0xFF);
226}
227
228static void
229il4965_rs_rate_scale_clear_win(struct il_rate_scale_data *win)
230{
231 win->data = 0;
232 win->success_counter = 0;
233 win->success_ratio = IL_INVALID_VALUE;
234 win->counter = 0;
235 win->average_tpt = IL_INVALID_VALUE;
236 win->stamp = 0;
237}
238
239static inline u8
240il4965_rs_is_valid_ant(u8 valid_antenna, u8 ant_type)
241{
242 return (ant_type & valid_antenna) == ant_type;
243}
244
245/*
246 * removes the old data from the stats. All data that is older than
247 * TID_MAX_TIME_DIFF, will be deleted.
248 */
249static void
250il4965_rs_tl_rm_old_stats(struct il_traffic_load *tl, u32 curr_time)
251{
252 /* The oldest age we want to keep */
253 u32 oldest_time = curr_time - TID_MAX_TIME_DIFF;
254
255 while (tl->queue_count && tl->time_stamp < oldest_time) {
256 tl->total -= tl->packet_count[tl->head];
257 tl->packet_count[tl->head] = 0;
258 tl->time_stamp += TID_QUEUE_CELL_SPACING;
259 tl->queue_count--;
260 tl->head++;
261 if (tl->head >= TID_QUEUE_MAX_SIZE)
262 tl->head = 0;
263 }
264}
265
266/*
267 * increment traffic load value for tid and also remove
268 * any old values if passed the certain time period
269 */
270static u8
271il4965_rs_tl_add_packet(struct il_lq_sta *lq_data, struct ieee80211_hdr *hdr)
272{
273 u32 curr_time = jiffies_to_msecs(jiffies);
274 u32 time_diff;
275 s32 idx;
276 struct il_traffic_load *tl = NULL;
277 u8 tid;
278
279 if (ieee80211_is_data_qos(hdr->frame_control)) {
280 u8 *qc = ieee80211_get_qos_ctl(hdr);
281 tid = qc[0] & 0xf;
282 } else
283 return MAX_TID_COUNT;
284
285 if (unlikely(tid >= TID_MAX_LOAD_COUNT))
286 return MAX_TID_COUNT;
287
288 tl = &lq_data->load[tid];
289
290 curr_time -= curr_time % TID_ROUND_VALUE;
291
292 /* Happens only for the first packet. Initialize the data */
293 if (!(tl->queue_count)) {
294 tl->total = 1;
295 tl->time_stamp = curr_time;
296 tl->queue_count = 1;
297 tl->head = 0;
298 tl->packet_count[0] = 1;
299 return MAX_TID_COUNT;
300 }
301
302 time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
303 idx = time_diff / TID_QUEUE_CELL_SPACING;
304
305 /* The history is too long: remove data that is older than */
306 /* TID_MAX_TIME_DIFF */
307 if (idx >= TID_QUEUE_MAX_SIZE)
308 il4965_rs_tl_rm_old_stats(tl, curr_time);
309
310 idx = (tl->head + idx) % TID_QUEUE_MAX_SIZE;
311 tl->packet_count[idx] = tl->packet_count[idx] + 1;
312 tl->total = tl->total + 1;
313
314 if ((idx + 1) > tl->queue_count)
315 tl->queue_count = idx + 1;
316
317 return tid;
318}
319
320/*
321 get the traffic load value for tid
322*/
323static u32
324il4965_rs_tl_get_load(struct il_lq_sta *lq_data, u8 tid)
325{
326 u32 curr_time = jiffies_to_msecs(jiffies);
327 u32 time_diff;
328 s32 idx;
329 struct il_traffic_load *tl = NULL;
330
331 if (tid >= TID_MAX_LOAD_COUNT)
332 return 0;
333
334 tl = &(lq_data->load[tid]);
335
336 curr_time -= curr_time % TID_ROUND_VALUE;
337
338 if (!(tl->queue_count))
339 return 0;
340
341 time_diff = TIME_WRAP_AROUND(tl->time_stamp, curr_time);
342 idx = time_diff / TID_QUEUE_CELL_SPACING;
343
344 /* The history is too long: remove data that is older than */
345 /* TID_MAX_TIME_DIFF */
346 if (idx >= TID_QUEUE_MAX_SIZE)
347 il4965_rs_tl_rm_old_stats(tl, curr_time);
348
349 return tl->total;
350}
351
352static int
353il4965_rs_tl_turn_on_agg_for_tid(struct il_priv *il, struct il_lq_sta *lq_data,
354 u8 tid, struct ieee80211_sta *sta)
355{
356 int ret = -EAGAIN;
357 u32 load;
358
359 load = il4965_rs_tl_get_load(lq_data, tid);
360
361 if (load > IL_AGG_LOAD_THRESHOLD) {
362 D_HT("Starting Tx agg: STA: %pM tid: %d\n", sta->addr, tid);
363 ret = ieee80211_start_tx_ba_session(sta, tid, 5000);
364 if (ret == -EAGAIN) {
365 /*
366 * driver and mac80211 is out of sync
367 * this might be cause by reloading firmware
368 * stop the tx ba session here
369 */
370 IL_ERR("Fail start Tx agg on tid: %d\n", tid);
371 ieee80211_stop_tx_ba_session(sta, tid);
372 }
373 } else
374 D_HT("Aggregation not enabled for tid %d because load = %u\n",
375 tid, load);
376
377 return ret;
378}
379
380static void
381il4965_rs_tl_turn_on_agg(struct il_priv *il, u8 tid, struct il_lq_sta *lq_data,
382 struct ieee80211_sta *sta)
383{
384 if (tid < TID_MAX_LOAD_COUNT)
385 il4965_rs_tl_turn_on_agg_for_tid(il, lq_data, tid, sta);
386 else
387 IL_ERR("tid exceeds max load count: %d/%d\n", tid,
388 TID_MAX_LOAD_COUNT);
389}
390
391static inline int
392il4965_get_il4965_num_of_ant_from_rate(u32 rate_n_flags)
393{
394 return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) +
395 !!(rate_n_flags & RATE_MCS_ANT_B_MSK) +
396 !!(rate_n_flags & RATE_MCS_ANT_C_MSK);
397}
398
399/*
400 * Static function to get the expected throughput from an il_scale_tbl_info
401 * that wraps a NULL pointer check
402 */
403static s32
404il4965_get_expected_tpt(struct il_scale_tbl_info *tbl, int rs_idx)
405{
406 if (tbl->expected_tpt)
407 return tbl->expected_tpt[rs_idx];
408 return 0;
409}
410
411/**
412 * il4965_rs_collect_tx_data - Update the success/failure sliding win
413 *
414 * We keep a sliding win of the last 62 packets transmitted
415 * at this rate. win->data contains the bitmask of successful
416 * packets.
417 */
418static int
419il4965_rs_collect_tx_data(struct il_scale_tbl_info *tbl, int scale_idx,
420 int attempts, int successes)
421{
422 struct il_rate_scale_data *win = NULL;
423 static const u64 mask = (((u64) 1) << (RATE_MAX_WINDOW - 1));
424 s32 fail_count, tpt;
425
426 if (scale_idx < 0 || scale_idx >= RATE_COUNT)
427 return -EINVAL;
428
429 /* Select win for current tx bit rate */
430 win = &(tbl->win[scale_idx]);
431
432 /* Get expected throughput */
433 tpt = il4965_get_expected_tpt(tbl, scale_idx);
434
435 /*
436 * Keep track of only the latest 62 tx frame attempts in this rate's
437 * history win; anything older isn't really relevant any more.
438 * If we have filled up the sliding win, drop the oldest attempt;
439 * if the oldest attempt (highest bit in bitmap) shows "success",
440 * subtract "1" from the success counter (this is the main reason
441 * we keep these bitmaps!).
442 */
443 while (attempts > 0) {
444 if (win->counter >= RATE_MAX_WINDOW) {
445
446 /* remove earliest */
447 win->counter = RATE_MAX_WINDOW - 1;
448
449 if (win->data & mask) {
450 win->data &= ~mask;
451 win->success_counter--;
452 }
453 }
454
455 /* Increment frames-attempted counter */
456 win->counter++;
457
458 /* Shift bitmap by one frame to throw away oldest history */
459 win->data <<= 1;
460
461 /* Mark the most recent #successes attempts as successful */
462 if (successes > 0) {
463 win->success_counter++;
464 win->data |= 0x1;
465 successes--;
466 }
467
468 attempts--;
469 }
470
471 /* Calculate current success ratio, avoid divide-by-0! */
472 if (win->counter > 0)
473 win->success_ratio =
474 128 * (100 * win->success_counter) / win->counter;
475 else
476 win->success_ratio = IL_INVALID_VALUE;
477
478 fail_count = win->counter - win->success_counter;
479
480 /* Calculate average throughput, if we have enough history. */
481 if (fail_count >= RATE_MIN_FAILURE_TH ||
482 win->success_counter >= RATE_MIN_SUCCESS_TH)
483 win->average_tpt = (win->success_ratio * tpt + 64) / 128;
484 else
485 win->average_tpt = IL_INVALID_VALUE;
486
487 /* Tag this win as having been updated */
488 win->stamp = jiffies;
489
490 return 0;
491}
492
493/*
494 * Fill uCode API rate_n_flags field, based on "search" or "active" table.
495 */
496static u32
497il4965_rate_n_flags_from_tbl(struct il_priv *il, struct il_scale_tbl_info *tbl,
498 int idx, u8 use_green)
499{
500 u32 rate_n_flags = 0;
501
502 if (is_legacy(tbl->lq_type)) {
503 rate_n_flags = il_rates[idx].plcp;
504 if (idx >= IL_FIRST_CCK_RATE && idx <= IL_LAST_CCK_RATE)
505 rate_n_flags |= RATE_MCS_CCK_MSK;
506
507 } else if (is_Ht(tbl->lq_type)) {
508 if (idx > IL_LAST_OFDM_RATE) {
509 IL_ERR("Invalid HT rate idx %d\n", idx);
510 idx = IL_LAST_OFDM_RATE;
511 }
512 rate_n_flags = RATE_MCS_HT_MSK;
513
514 if (is_siso(tbl->lq_type))
515 rate_n_flags |= il_rates[idx].plcp_siso;
516 else
517 rate_n_flags |= il_rates[idx].plcp_mimo2;
518 } else {
519 IL_ERR("Invalid tbl->lq_type %d\n", tbl->lq_type);
520 }
521
522 rate_n_flags |=
523 ((tbl->ant_type << RATE_MCS_ANT_POS) & RATE_MCS_ANT_ABC_MSK);
524
525 if (is_Ht(tbl->lq_type)) {
526 if (tbl->is_ht40) {
527 if (tbl->is_dup)
528 rate_n_flags |= RATE_MCS_DUP_MSK;
529 else
530 rate_n_flags |= RATE_MCS_HT40_MSK;
531 }
532 if (tbl->is_SGI)
533 rate_n_flags |= RATE_MCS_SGI_MSK;
534
535 if (use_green) {
536 rate_n_flags |= RATE_MCS_GF_MSK;
537 if (is_siso(tbl->lq_type) && tbl->is_SGI) {
538 rate_n_flags &= ~RATE_MCS_SGI_MSK;
539 IL_ERR("GF was set with SGI:SISO\n");
540 }
541 }
542 }
543 return rate_n_flags;
544}
545
546/*
547 * Interpret uCode API's rate_n_flags format,
548 * fill "search" or "active" tx mode table.
549 */
550static int
551il4965_rs_get_tbl_info_from_mcs(const u32 rate_n_flags,
552 enum ieee80211_band band,
553 struct il_scale_tbl_info *tbl, int *rate_idx)
554{
555 u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK);
556 u8 il4965_num_of_ant =
557 il4965_get_il4965_num_of_ant_from_rate(rate_n_flags);
558 u8 mcs;
559
560 memset(tbl, 0, sizeof(struct il_scale_tbl_info));
561 *rate_idx = il4965_hwrate_to_plcp_idx(rate_n_flags);
562
563 if (*rate_idx == RATE_INVALID) {
564 *rate_idx = -1;
565 return -EINVAL;
566 }
567 tbl->is_SGI = 0; /* default legacy setup */
568 tbl->is_ht40 = 0;
569 tbl->is_dup = 0;
570 tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS);
571 tbl->lq_type = LQ_NONE;
572 tbl->max_search = IL_MAX_SEARCH;
573
574 /* legacy rate format */
575 if (!(rate_n_flags & RATE_MCS_HT_MSK)) {
576 if (il4965_num_of_ant == 1) {
577 if (band == IEEE80211_BAND_5GHZ)
578 tbl->lq_type = LQ_A;
579 else
580 tbl->lq_type = LQ_G;
581 }
582 /* HT rate format */
583 } else {
584 if (rate_n_flags & RATE_MCS_SGI_MSK)
585 tbl->is_SGI = 1;
586
587 if ((rate_n_flags & RATE_MCS_HT40_MSK) ||
588 (rate_n_flags & RATE_MCS_DUP_MSK))
589 tbl->is_ht40 = 1;
590
591 if (rate_n_flags & RATE_MCS_DUP_MSK)
592 tbl->is_dup = 1;
593
594 mcs = il4965_rs_extract_rate(rate_n_flags);
595
596 /* SISO */
597 if (mcs <= RATE_SISO_60M_PLCP) {
598 if (il4965_num_of_ant == 1)
599 tbl->lq_type = LQ_SISO; /*else NONE */
600 /* MIMO2 */
601 } else {
602 if (il4965_num_of_ant == 2)
603 tbl->lq_type = LQ_MIMO2;
604 }
605 }
606 return 0;
607}
608
609/* switch to another antenna/antennas and return 1 */
610/* if no other valid antenna found, return 0 */
611static int
612il4965_rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags,
613 struct il_scale_tbl_info *tbl)
614{
615 u8 new_ant_type;
616
617 if (!tbl->ant_type || tbl->ant_type > ANT_ABC)
618 return 0;
619
620 if (!il4965_rs_is_valid_ant(valid_ant, tbl->ant_type))
621 return 0;
622
623 new_ant_type = ant_toggle_lookup[tbl->ant_type];
624
625 while (new_ant_type != tbl->ant_type &&
626 !il4965_rs_is_valid_ant(valid_ant, new_ant_type))
627 new_ant_type = ant_toggle_lookup[new_ant_type];
628
629 if (new_ant_type == tbl->ant_type)
630 return 0;
631
632 tbl->ant_type = new_ant_type;
633 *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK;
634 *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS;
635 return 1;
636}
637
638/**
639 * Green-field mode is valid if the station supports it and
640 * there are no non-GF stations present in the BSS.
641 */
642static bool
643il4965_rs_use_green(struct il_priv *il, struct ieee80211_sta *sta)
644{
645 return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) &&
646 !il->ht.non_gf_sta_present;
647}
648
649/**
650 * il4965_rs_get_supported_rates - get the available rates
651 *
652 * if management frame or broadcast frame only return
653 * basic available rates.
654 *
655 */
656static u16
657il4965_rs_get_supported_rates(struct il_lq_sta *lq_sta,
658 struct ieee80211_hdr *hdr,
659 enum il_table_type rate_type)
660{
661 if (is_legacy(rate_type)) {
662 return lq_sta->active_legacy_rate;
663 } else {
664 if (is_siso(rate_type))
665 return lq_sta->active_siso_rate;
666 else
667 return lq_sta->active_mimo2_rate;
668 }
669}
670
671static u16
672il4965_rs_get_adjacent_rate(struct il_priv *il, u8 idx, u16 rate_mask,
673 int rate_type)
674{
675 u8 high = RATE_INVALID;
676 u8 low = RATE_INVALID;
677
678 /* 802.11A or ht walks to the next literal adjacent rate in
679 * the rate table */
680 if (is_a_band(rate_type) || !is_legacy(rate_type)) {
681 int i;
682 u32 mask;
683
684 /* Find the previous rate that is in the rate mask */
685 i = idx - 1;
686 for (mask = (1 << i); i >= 0; i--, mask >>= 1) {
687 if (rate_mask & mask) {
688 low = i;
689 break;
690 }
691 }
692
693 /* Find the next rate that is in the rate mask */
694 i = idx + 1;
695 for (mask = (1 << i); i < RATE_COUNT; i++, mask <<= 1) {
696 if (rate_mask & mask) {
697 high = i;
698 break;
699 }
700 }
701
702 return (high << 8) | low;
703 }
704
705 low = idx;
706 while (low != RATE_INVALID) {
707 low = il_rates[low].prev_rs;
708 if (low == RATE_INVALID)
709 break;
710 if (rate_mask & (1 << low))
711 break;
712 D_RATE("Skipping masked lower rate: %d\n", low);
713 }
714
715 high = idx;
716 while (high != RATE_INVALID) {
717 high = il_rates[high].next_rs;
718 if (high == RATE_INVALID)
719 break;
720 if (rate_mask & (1 << high))
721 break;
722 D_RATE("Skipping masked higher rate: %d\n", high);
723 }
724
725 return (high << 8) | low;
726}
727
728static u32
729il4965_rs_get_lower_rate(struct il_lq_sta *lq_sta,
730 struct il_scale_tbl_info *tbl, u8 scale_idx,
731 u8 ht_possible)
732{
733 s32 low;
734 u16 rate_mask;
735 u16 high_low;
736 u8 switch_to_legacy = 0;
737 u8 is_green = lq_sta->is_green;
738 struct il_priv *il = lq_sta->drv;
739
740 /* check if we need to switch from HT to legacy rates.
741 * assumption is that mandatory rates (1Mbps or 6Mbps)
742 * are always supported (spec demand) */
743 if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_idx)) {
744 switch_to_legacy = 1;
745 scale_idx = rs_ht_to_legacy[scale_idx];
746 if (lq_sta->band == IEEE80211_BAND_5GHZ)
747 tbl->lq_type = LQ_A;
748 else
749 tbl->lq_type = LQ_G;
750
751 if (il4965_num_of_ant(tbl->ant_type) > 1)
752 tbl->ant_type =
753 il4965_first_antenna(il->hw_params.valid_tx_ant);
754
755 tbl->is_ht40 = 0;
756 tbl->is_SGI = 0;
757 tbl->max_search = IL_MAX_SEARCH;
758 }
759
760 rate_mask = il4965_rs_get_supported_rates(lq_sta, NULL, tbl->lq_type);
761
762 /* Mask with station rate restriction */
763 if (is_legacy(tbl->lq_type)) {
764 /* supp_rates has no CCK bits in A mode */
765 if (lq_sta->band == IEEE80211_BAND_5GHZ)
766 rate_mask =
767 (u16) (rate_mask &
768 (lq_sta->supp_rates << IL_FIRST_OFDM_RATE));
769 else
770 rate_mask = (u16) (rate_mask & lq_sta->supp_rates);
771 }
772
773 /* If we switched from HT to legacy, check current rate */
774 if (switch_to_legacy && (rate_mask & (1 << scale_idx))) {
775 low = scale_idx;
776 goto out;
777 }
778
779 high_low =
780 il4965_rs_get_adjacent_rate(lq_sta->drv, scale_idx, rate_mask,
781 tbl->lq_type);
782 low = high_low & 0xff;
783
784 if (low == RATE_INVALID)
785 low = scale_idx;
786
787out:
788 return il4965_rate_n_flags_from_tbl(lq_sta->drv, tbl, low, is_green);
789}
790
791/*
792 * Simple function to compare two rate scale table types
793 */
794static bool
795il4965_table_type_matches(struct il_scale_tbl_info *a,
796 struct il_scale_tbl_info *b)
797{
798 return (a->lq_type == b->lq_type && a->ant_type == b->ant_type &&
799 a->is_SGI == b->is_SGI);
800}
801
802/*
803 * mac80211 sends us Tx status
804 */
805static void
806il4965_rs_tx_status(void *il_r, struct ieee80211_supported_band *sband,
807 struct ieee80211_sta *sta, void *il_sta,
808 struct sk_buff *skb)
809{
810 int legacy_success;
811 int retries;
812 int rs_idx, mac_idx, i;
813 struct il_lq_sta *lq_sta = il_sta;
814 struct il_link_quality_cmd *table;
815 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
816 struct il_priv *il = (struct il_priv *)il_r;
817 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
818 enum mac80211_rate_control_flags mac_flags;
819 u32 tx_rate;
820 struct il_scale_tbl_info tbl_type;
821 struct il_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl;
822
823 D_RATE("get frame ack response, update rate scale win\n");
824
825 /* Treat uninitialized rate scaling data same as non-existing. */
826 if (!lq_sta) {
827 D_RATE("Station rate scaling not created yet.\n");
828 return;
829 } else if (!lq_sta->drv) {
830 D_RATE("Rate scaling not initialized yet.\n");
831 return;
832 }
833
834 if (!ieee80211_is_data(hdr->frame_control) ||
835 (info->flags & IEEE80211_TX_CTL_NO_ACK))
836 return;
837
838 /* This packet was aggregated but doesn't carry status info */
839 if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
840 !(info->flags & IEEE80211_TX_STAT_AMPDU))
841 return;
842
843 /*
844 * Ignore this Tx frame response if its initial rate doesn't match
845 * that of latest Link Quality command. There may be stragglers
846 * from a previous Link Quality command, but we're no longer interested
847 * in those; they're either from the "active" mode while we're trying
848 * to check "search" mode, or a prior "search" mode after we've moved
849 * to a new "search" mode (which might become the new "active" mode).
850 */
851 table = &lq_sta->lq;
852 tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
853 il4965_rs_get_tbl_info_from_mcs(tx_rate, il->band, &tbl_type, &rs_idx);
854 if (il->band == IEEE80211_BAND_5GHZ)
855 rs_idx -= IL_FIRST_OFDM_RATE;
856 mac_flags = info->status.rates[0].flags;
857 mac_idx = info->status.rates[0].idx;
858 /* For HT packets, map MCS to PLCP */
859 if (mac_flags & IEEE80211_TX_RC_MCS) {
860 mac_idx &= RATE_MCS_CODE_MSK; /* Remove # of streams */
861 if (mac_idx >= (RATE_9M_IDX - IL_FIRST_OFDM_RATE))
862 mac_idx++;
863 /*
864 * mac80211 HT idx is always zero-idxed; we need to move
865 * HT OFDM rates after CCK rates in 2.4 GHz band
866 */
867 if (il->band == IEEE80211_BAND_2GHZ)
868 mac_idx += IL_FIRST_OFDM_RATE;
869 }
870 /* Here we actually compare this rate to the latest LQ command */
871 if (mac_idx < 0 ||
872 tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI) ||
873 tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH) ||
874 tbl_type.is_dup != !!(mac_flags & IEEE80211_TX_RC_DUP_DATA) ||
875 tbl_type.ant_type != info->status.antenna ||
876 !!(tx_rate & RATE_MCS_HT_MSK) != !!(mac_flags & IEEE80211_TX_RC_MCS)
877 || !!(tx_rate & RATE_MCS_GF_MSK) !=
878 !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD) || rs_idx != mac_idx) {
879 D_RATE("initial rate %d does not match %d (0x%x)\n", mac_idx,
880 rs_idx, tx_rate);
881 /*
882 * Since rates mis-match, the last LQ command may have failed.
883 * After IL_MISSED_RATE_MAX mis-matches, resync the uCode with
884 * ... driver.
885 */
886 lq_sta->missed_rate_counter++;
887 if (lq_sta->missed_rate_counter > IL_MISSED_RATE_MAX) {
888 lq_sta->missed_rate_counter = 0;
889 il_send_lq_cmd(il, &lq_sta->lq, CMD_ASYNC, false);
890 }
891 /* Regardless, ignore this status info for outdated rate */
892 return;
893 } else
894 /* Rate did match, so reset the missed_rate_counter */
895 lq_sta->missed_rate_counter = 0;
896
897 /* Figure out if rate scale algorithm is in active or search table */
898 if (il4965_table_type_matches
899 (&tbl_type, &(lq_sta->lq_info[lq_sta->active_tbl]))) {
900 curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
901 other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
902 } else
903 if (il4965_table_type_matches
904 (&tbl_type, &lq_sta->lq_info[1 - lq_sta->active_tbl])) {
905 curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
906 other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
907 } else {
908 D_RATE("Neither active nor search matches tx rate\n");
909 tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
910 D_RATE("active- lq:%x, ant:%x, SGI:%d\n", tmp_tbl->lq_type,
911 tmp_tbl->ant_type, tmp_tbl->is_SGI);
912 tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
913 D_RATE("search- lq:%x, ant:%x, SGI:%d\n", tmp_tbl->lq_type,
914 tmp_tbl->ant_type, tmp_tbl->is_SGI);
915 D_RATE("actual- lq:%x, ant:%x, SGI:%d\n", tbl_type.lq_type,
916 tbl_type.ant_type, tbl_type.is_SGI);
917 /*
918 * no matching table found, let's by-pass the data collection
919 * and continue to perform rate scale to find the rate table
920 */
921 il4965_rs_stay_in_table(lq_sta, true);
922 goto done;
923 }
924
925 /*
926 * Updating the frame history depends on whether packets were
927 * aggregated.
928 *
929 * For aggregation, all packets were transmitted at the same rate, the
930 * first idx into rate scale table.
931 */
932 if (info->flags & IEEE80211_TX_STAT_AMPDU) {
933 tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
934 il4965_rs_get_tbl_info_from_mcs(tx_rate, il->band, &tbl_type,
935 &rs_idx);
936 il4965_rs_collect_tx_data(curr_tbl, rs_idx,
937 info->status.ampdu_len,
938 info->status.ampdu_ack_len);
939
940 /* Update success/fail counts if not searching for new mode */
941 if (lq_sta->stay_in_tbl) {
942 lq_sta->total_success += info->status.ampdu_ack_len;
943 lq_sta->total_failed +=
944 (info->status.ampdu_len -
945 info->status.ampdu_ack_len);
946 }
947 } else {
948 /*
949 * For legacy, update frame history with for each Tx retry.
950 */
951 retries = info->status.rates[0].count - 1;
952 /* HW doesn't send more than 15 retries */
953 retries = min(retries, 15);
954
955 /* The last transmission may have been successful */
956 legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK);
957 /* Collect data for each rate used during failed TX attempts */
958 for (i = 0; i <= retries; ++i) {
959 tx_rate = le32_to_cpu(table->rs_table[i].rate_n_flags);
960 il4965_rs_get_tbl_info_from_mcs(tx_rate, il->band,
961 &tbl_type, &rs_idx);
962 /*
963 * Only collect stats if retried rate is in the same RS
964 * table as active/search.
965 */
966 if (il4965_table_type_matches(&tbl_type, curr_tbl))
967 tmp_tbl = curr_tbl;
968 else if (il4965_table_type_matches
969 (&tbl_type, other_tbl))
970 tmp_tbl = other_tbl;
971 else
972 continue;
973 il4965_rs_collect_tx_data(tmp_tbl, rs_idx, 1,
974 i <
975 retries ? 0 : legacy_success);
976 }
977
978 /* Update success/fail counts if not searching for new mode */
979 if (lq_sta->stay_in_tbl) {
980 lq_sta->total_success += legacy_success;
981 lq_sta->total_failed += retries + (1 - legacy_success);
982 }
983 }
984 /* The last TX rate is cached in lq_sta; it's set in if/else above */
985 lq_sta->last_rate_n_flags = tx_rate;
986done:
987 /* See if there's a better rate or modulation mode to try. */
988 if (sta->supp_rates[sband->band])
989 il4965_rs_rate_scale_perform(il, skb, sta, lq_sta);
990}
991
992/*
993 * Begin a period of staying with a selected modulation mode.
994 * Set "stay_in_tbl" flag to prevent any mode switches.
995 * Set frame tx success limits according to legacy vs. high-throughput,
996 * and reset overall (spanning all rates) tx success history stats.
997 * These control how long we stay using same modulation mode before
998 * searching for a new mode.
999 */
1000static void
1001il4965_rs_set_stay_in_table(struct il_priv *il, u8 is_legacy,
1002 struct il_lq_sta *lq_sta)
1003{
1004 D_RATE("we are staying in the same table\n");
1005 lq_sta->stay_in_tbl = 1; /* only place this gets set */
1006 if (is_legacy) {
1007 lq_sta->table_count_limit = IL_LEGACY_TBL_COUNT;
1008 lq_sta->max_failure_limit = IL_LEGACY_FAILURE_LIMIT;
1009 lq_sta->max_success_limit = IL_LEGACY_SUCCESS_LIMIT;
1010 } else {
1011 lq_sta->table_count_limit = IL_NONE_LEGACY_TBL_COUNT;
1012 lq_sta->max_failure_limit = IL_NONE_LEGACY_FAILURE_LIMIT;
1013 lq_sta->max_success_limit = IL_NONE_LEGACY_SUCCESS_LIMIT;
1014 }
1015 lq_sta->table_count = 0;
1016 lq_sta->total_failed = 0;
1017 lq_sta->total_success = 0;
1018 lq_sta->flush_timer = jiffies;
1019 lq_sta->action_counter = 0;
1020}
1021
1022/*
1023 * Find correct throughput table for given mode of modulation
1024 */
1025static void
1026il4965_rs_set_expected_tpt_table(struct il_lq_sta *lq_sta,
1027 struct il_scale_tbl_info *tbl)
1028{
1029 /* Used to choose among HT tables */
1030 s32(*ht_tbl_pointer)[RATE_COUNT];
1031
1032 /* Check for invalid LQ type */
1033 if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) {
1034 tbl->expected_tpt = expected_tpt_legacy;
1035 return;
1036 }
1037
1038 /* Legacy rates have only one table */
1039 if (is_legacy(tbl->lq_type)) {
1040 tbl->expected_tpt = expected_tpt_legacy;
1041 return;
1042 }
1043
1044 /* Choose among many HT tables depending on number of streams
1045 * (SISO/MIMO2), channel width (20/40), SGI, and aggregation
1046 * status */
1047 if (is_siso(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
1048 ht_tbl_pointer = expected_tpt_siso20MHz;
1049 else if (is_siso(tbl->lq_type))
1050 ht_tbl_pointer = expected_tpt_siso40MHz;
1051 else if (is_mimo2(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
1052 ht_tbl_pointer = expected_tpt_mimo2_20MHz;
1053 else /* if (is_mimo2(tbl->lq_type)) <-- must be true */
1054 ht_tbl_pointer = expected_tpt_mimo2_40MHz;
1055
1056 if (!tbl->is_SGI && !lq_sta->is_agg) /* Normal */
1057 tbl->expected_tpt = ht_tbl_pointer[0];
1058 else if (tbl->is_SGI && !lq_sta->is_agg) /* SGI */
1059 tbl->expected_tpt = ht_tbl_pointer[1];
1060 else if (!tbl->is_SGI && lq_sta->is_agg) /* AGG */
1061 tbl->expected_tpt = ht_tbl_pointer[2];
1062 else /* AGG+SGI */
1063 tbl->expected_tpt = ht_tbl_pointer[3];
1064}
1065
1066/*
1067 * Find starting rate for new "search" high-throughput mode of modulation.
1068 * Goal is to find lowest expected rate (under perfect conditions) that is
1069 * above the current measured throughput of "active" mode, to give new mode
1070 * a fair chance to prove itself without too many challenges.
1071 *
1072 * This gets called when transitioning to more aggressive modulation
1073 * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive
1074 * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need
1075 * to decrease to match "active" throughput. When moving from MIMO to SISO,
1076 * bit rate will typically need to increase, but not if performance was bad.
1077 */
1078static s32
1079il4965_rs_get_best_rate(struct il_priv *il, struct il_lq_sta *lq_sta,
1080 struct il_scale_tbl_info *tbl, /* "search" */
1081 u16 rate_mask, s8 idx)
1082{
1083 /* "active" values */
1084 struct il_scale_tbl_info *active_tbl =
1085 &(lq_sta->lq_info[lq_sta->active_tbl]);
1086 s32 active_sr = active_tbl->win[idx].success_ratio;
1087 s32 active_tpt = active_tbl->expected_tpt[idx];
1088
1089 /* expected "search" throughput */
1090 s32 *tpt_tbl = tbl->expected_tpt;
1091
1092 s32 new_rate, high, low, start_hi;
1093 u16 high_low;
1094 s8 rate = idx;
1095
1096 new_rate = high = low = start_hi = RATE_INVALID;
1097
1098 for (;;) {
1099 high_low =
1100 il4965_rs_get_adjacent_rate(il, rate, rate_mask,
1101 tbl->lq_type);
1102
1103 low = high_low & 0xff;
1104 high = (high_low >> 8) & 0xff;
1105
1106 /*
1107 * Lower the "search" bit rate, to give new "search" mode
1108 * approximately the same throughput as "active" if:
1109 *
1110 * 1) "Active" mode has been working modestly well (but not
1111 * great), and expected "search" throughput (under perfect
1112 * conditions) at candidate rate is above the actual
1113 * measured "active" throughput (but less than expected
1114 * "active" throughput under perfect conditions).
1115 * OR
1116 * 2) "Active" mode has been working perfectly or very well
1117 * and expected "search" throughput (under perfect
1118 * conditions) at candidate rate is above expected
1119 * "active" throughput (under perfect conditions).
1120 */
1121 if ((100 * tpt_tbl[rate] > lq_sta->last_tpt &&
1122 (active_sr > RATE_DECREASE_TH && active_sr <= RATE_HIGH_TH
1123 && tpt_tbl[rate] <= active_tpt)) ||
1124 (active_sr >= RATE_SCALE_SWITCH &&
1125 tpt_tbl[rate] > active_tpt)) {
1126
1127 /* (2nd or later pass)
1128 * If we've already tried to raise the rate, and are
1129 * now trying to lower it, use the higher rate. */
1130 if (start_hi != RATE_INVALID) {
1131 new_rate = start_hi;
1132 break;
1133 }
1134
1135 new_rate = rate;
1136
1137 /* Loop again with lower rate */
1138 if (low != RATE_INVALID)
1139 rate = low;
1140
1141 /* Lower rate not available, use the original */
1142 else
1143 break;
1144
1145 /* Else try to raise the "search" rate to match "active" */
1146 } else {
1147 /* (2nd or later pass)
1148 * If we've already tried to lower the rate, and are
1149 * now trying to raise it, use the lower rate. */
1150 if (new_rate != RATE_INVALID)
1151 break;
1152
1153 /* Loop again with higher rate */
1154 else if (high != RATE_INVALID) {
1155 start_hi = high;
1156 rate = high;
1157
1158 /* Higher rate not available, use the original */
1159 } else {
1160 new_rate = rate;
1161 break;
1162 }
1163 }
1164 }
1165
1166 return new_rate;
1167}
1168
1169/*
1170 * Set up search table for MIMO2
1171 */
1172static int
1173il4965_rs_switch_to_mimo2(struct il_priv *il, struct il_lq_sta *lq_sta,
1174 struct ieee80211_conf *conf,
1175 struct ieee80211_sta *sta,
1176 struct il_scale_tbl_info *tbl, int idx)
1177{
1178 u16 rate_mask;
1179 s32 rate;
1180 s8 is_green = lq_sta->is_green;
1181
1182 if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
1183 return -1;
1184
1185 if (sta->smps_mode == IEEE80211_SMPS_STATIC)
1186 return -1;
1187
1188 /* Need both Tx chains/antennas to support MIMO */
1189 if (il->hw_params.tx_chains_num < 2)
1190 return -1;
1191
1192 D_RATE("LQ: try to switch to MIMO2\n");
1193
1194 tbl->lq_type = LQ_MIMO2;
1195 tbl->is_dup = lq_sta->is_dup;
1196 tbl->action = 0;
1197 tbl->max_search = IL_MAX_SEARCH;
1198 rate_mask = lq_sta->active_mimo2_rate;
1199
1200 if (il_is_ht40_tx_allowed(il, &sta->ht_cap))
1201 tbl->is_ht40 = 1;
1202 else
1203 tbl->is_ht40 = 0;
1204
1205 il4965_rs_set_expected_tpt_table(lq_sta, tbl);
1206
1207 rate = il4965_rs_get_best_rate(il, lq_sta, tbl, rate_mask, idx);
1208
1209 D_RATE("LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask);
1210 if (rate == RATE_INVALID || !((1 << rate) & rate_mask)) {
1211 D_RATE("Can't switch with idx %d rate mask %x\n", rate,
1212 rate_mask);
1213 return -1;
1214 }
1215 tbl->current_rate =
1216 il4965_rate_n_flags_from_tbl(il, tbl, rate, is_green);
1217
1218 D_RATE("LQ: Switch to new mcs %X idx is green %X\n", tbl->current_rate,
1219 is_green);
1220 return 0;
1221}
1222
1223/*
1224 * Set up search table for SISO
1225 */
1226static int
1227il4965_rs_switch_to_siso(struct il_priv *il, struct il_lq_sta *lq_sta,
1228 struct ieee80211_conf *conf, struct ieee80211_sta *sta,
1229 struct il_scale_tbl_info *tbl, int idx)
1230{
1231 u16 rate_mask;
1232 u8 is_green = lq_sta->is_green;
1233 s32 rate;
1234
1235 if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported)
1236 return -1;
1237
1238 D_RATE("LQ: try to switch to SISO\n");
1239
1240 tbl->is_dup = lq_sta->is_dup;
1241 tbl->lq_type = LQ_SISO;
1242 tbl->action = 0;
1243 tbl->max_search = IL_MAX_SEARCH;
1244 rate_mask = lq_sta->active_siso_rate;
1245
1246 if (il_is_ht40_tx_allowed(il, &sta->ht_cap))
1247 tbl->is_ht40 = 1;
1248 else
1249 tbl->is_ht40 = 0;
1250
1251 if (is_green)
1252 tbl->is_SGI = 0; /*11n spec: no SGI in SISO+Greenfield */
1253
1254 il4965_rs_set_expected_tpt_table(lq_sta, tbl);
1255 rate = il4965_rs_get_best_rate(il, lq_sta, tbl, rate_mask, idx);
1256
1257 D_RATE("LQ: get best rate %d mask %X\n", rate, rate_mask);
1258 if (rate == RATE_INVALID || !((1 << rate) & rate_mask)) {
1259 D_RATE("can not switch with idx %d rate mask %x\n", rate,
1260 rate_mask);
1261 return -1;
1262 }
1263 tbl->current_rate =
1264 il4965_rate_n_flags_from_tbl(il, tbl, rate, is_green);
1265 D_RATE("LQ: Switch to new mcs %X idx is green %X\n", tbl->current_rate,
1266 is_green);
1267 return 0;
1268}
1269
1270/*
1271 * Try to switch to new modulation mode from legacy
1272 */
1273static int
1274il4965_rs_move_legacy_other(struct il_priv *il, struct il_lq_sta *lq_sta,
1275 struct ieee80211_conf *conf,
1276 struct ieee80211_sta *sta, int idx)
1277{
1278 struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1279 struct il_scale_tbl_info *search_tbl =
1280 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1281 struct il_rate_scale_data *win = &(tbl->win[idx]);
1282 u32 sz =
1283 (sizeof(struct il_scale_tbl_info) -
1284 (sizeof(struct il_rate_scale_data) * RATE_COUNT));
1285 u8 start_action;
1286 u8 valid_tx_ant = il->hw_params.valid_tx_ant;
1287 u8 tx_chains_num = il->hw_params.tx_chains_num;
1288 int ret = 0;
1289 u8 update_search_tbl_counter = 0;
1290
1291 tbl->action = IL_LEGACY_SWITCH_SISO;
1292
1293 start_action = tbl->action;
1294 for (;;) {
1295 lq_sta->action_counter++;
1296 switch (tbl->action) {
1297 case IL_LEGACY_SWITCH_ANTENNA1:
1298 case IL_LEGACY_SWITCH_ANTENNA2:
1299 D_RATE("LQ: Legacy toggle Antenna\n");
1300
1301 if ((tbl->action == IL_LEGACY_SWITCH_ANTENNA1 &&
1302 tx_chains_num <= 1) ||
1303 (tbl->action == IL_LEGACY_SWITCH_ANTENNA2 &&
1304 tx_chains_num <= 2))
1305 break;
1306
1307 /* Don't change antenna if success has been great */
1308 if (win->success_ratio >= IL_RS_GOOD_RATIO)
1309 break;
1310
1311 /* Set up search table to try other antenna */
1312 memcpy(search_tbl, tbl, sz);
1313
1314 if (il4965_rs_toggle_antenna
1315 (valid_tx_ant, &search_tbl->current_rate,
1316 search_tbl)) {
1317 update_search_tbl_counter = 1;
1318 il4965_rs_set_expected_tpt_table(lq_sta,
1319 search_tbl);
1320 goto out;
1321 }
1322 break;
1323 case IL_LEGACY_SWITCH_SISO:
1324 D_RATE("LQ: Legacy switch to SISO\n");
1325
1326 /* Set up search table to try SISO */
1327 memcpy(search_tbl, tbl, sz);
1328 search_tbl->is_SGI = 0;
1329 ret =
1330 il4965_rs_switch_to_siso(il, lq_sta, conf, sta,
1331 search_tbl, idx);
1332 if (!ret) {
1333 lq_sta->action_counter = 0;
1334 goto out;
1335 }
1336
1337 break;
1338 case IL_LEGACY_SWITCH_MIMO2_AB:
1339 case IL_LEGACY_SWITCH_MIMO2_AC:
1340 case IL_LEGACY_SWITCH_MIMO2_BC:
1341 D_RATE("LQ: Legacy switch to MIMO2\n");
1342
1343 /* Set up search table to try MIMO */
1344 memcpy(search_tbl, tbl, sz);
1345 search_tbl->is_SGI = 0;
1346
1347 if (tbl->action == IL_LEGACY_SWITCH_MIMO2_AB)
1348 search_tbl->ant_type = ANT_AB;
1349 else if (tbl->action == IL_LEGACY_SWITCH_MIMO2_AC)
1350 search_tbl->ant_type = ANT_AC;
1351 else
1352 search_tbl->ant_type = ANT_BC;
1353
1354 if (!il4965_rs_is_valid_ant
1355 (valid_tx_ant, search_tbl->ant_type))
1356 break;
1357
1358 ret =
1359 il4965_rs_switch_to_mimo2(il, lq_sta, conf, sta,
1360 search_tbl, idx);
1361 if (!ret) {
1362 lq_sta->action_counter = 0;
1363 goto out;
1364 }
1365 break;
1366 }
1367 tbl->action++;
1368 if (tbl->action > IL_LEGACY_SWITCH_MIMO2_BC)
1369 tbl->action = IL_LEGACY_SWITCH_ANTENNA1;
1370
1371 if (tbl->action == start_action)
1372 break;
1373
1374 }
1375 search_tbl->lq_type = LQ_NONE;
1376 return 0;
1377
1378out:
1379 lq_sta->search_better_tbl = 1;
1380 tbl->action++;
1381 if (tbl->action > IL_LEGACY_SWITCH_MIMO2_BC)
1382 tbl->action = IL_LEGACY_SWITCH_ANTENNA1;
1383 if (update_search_tbl_counter)
1384 search_tbl->action = tbl->action;
1385 return 0;
1386
1387}
1388
1389/*
1390 * Try to switch to new modulation mode from SISO
1391 */
1392static int
1393il4965_rs_move_siso_to_other(struct il_priv *il, struct il_lq_sta *lq_sta,
1394 struct ieee80211_conf *conf,
1395 struct ieee80211_sta *sta, int idx)
1396{
1397 u8 is_green = lq_sta->is_green;
1398 struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1399 struct il_scale_tbl_info *search_tbl =
1400 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1401 struct il_rate_scale_data *win = &(tbl->win[idx]);
1402 struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
1403 u32 sz =
1404 (sizeof(struct il_scale_tbl_info) -
1405 (sizeof(struct il_rate_scale_data) * RATE_COUNT));
1406 u8 start_action;
1407 u8 valid_tx_ant = il->hw_params.valid_tx_ant;
1408 u8 tx_chains_num = il->hw_params.tx_chains_num;
1409 u8 update_search_tbl_counter = 0;
1410 int ret;
1411
1412 start_action = tbl->action;
1413
1414 for (;;) {
1415 lq_sta->action_counter++;
1416 switch (tbl->action) {
1417 case IL_SISO_SWITCH_ANTENNA1:
1418 case IL_SISO_SWITCH_ANTENNA2:
1419 D_RATE("LQ: SISO toggle Antenna\n");
1420 if ((tbl->action == IL_SISO_SWITCH_ANTENNA1 &&
1421 tx_chains_num <= 1) ||
1422 (tbl->action == IL_SISO_SWITCH_ANTENNA2 &&
1423 tx_chains_num <= 2))
1424 break;
1425
1426 if (win->success_ratio >= IL_RS_GOOD_RATIO)
1427 break;
1428
1429 memcpy(search_tbl, tbl, sz);
1430 if (il4965_rs_toggle_antenna
1431 (valid_tx_ant, &search_tbl->current_rate,
1432 search_tbl)) {
1433 update_search_tbl_counter = 1;
1434 goto out;
1435 }
1436 break;
1437 case IL_SISO_SWITCH_MIMO2_AB:
1438 case IL_SISO_SWITCH_MIMO2_AC:
1439 case IL_SISO_SWITCH_MIMO2_BC:
1440 D_RATE("LQ: SISO switch to MIMO2\n");
1441 memcpy(search_tbl, tbl, sz);
1442 search_tbl->is_SGI = 0;
1443
1444 if (tbl->action == IL_SISO_SWITCH_MIMO2_AB)
1445 search_tbl->ant_type = ANT_AB;
1446 else if (tbl->action == IL_SISO_SWITCH_MIMO2_AC)
1447 search_tbl->ant_type = ANT_AC;
1448 else
1449 search_tbl->ant_type = ANT_BC;
1450
1451 if (!il4965_rs_is_valid_ant
1452 (valid_tx_ant, search_tbl->ant_type))
1453 break;
1454
1455 ret =
1456 il4965_rs_switch_to_mimo2(il, lq_sta, conf, sta,
1457 search_tbl, idx);
1458 if (!ret)
1459 goto out;
1460 break;
1461 case IL_SISO_SWITCH_GI:
1462 if (!tbl->is_ht40 &&
1463 !(ht_cap->cap & IEEE80211_HT_CAP_SGI_20))
1464 break;
1465 if (tbl->is_ht40 &&
1466 !(ht_cap->cap & IEEE80211_HT_CAP_SGI_40))
1467 break;
1468
1469 D_RATE("LQ: SISO toggle SGI/NGI\n");
1470
1471 memcpy(search_tbl, tbl, sz);
1472 if (is_green) {
1473 if (!tbl->is_SGI)
1474 break;
1475 else
1476 IL_ERR("SGI was set in GF+SISO\n");
1477 }
1478 search_tbl->is_SGI = !tbl->is_SGI;
1479 il4965_rs_set_expected_tpt_table(lq_sta, search_tbl);
1480 if (tbl->is_SGI) {
1481 s32 tpt = lq_sta->last_tpt / 100;
1482 if (tpt >= search_tbl->expected_tpt[idx])
1483 break;
1484 }
1485 search_tbl->current_rate =
1486 il4965_rate_n_flags_from_tbl(il, search_tbl, idx,
1487 is_green);
1488 update_search_tbl_counter = 1;
1489 goto out;
1490 }
1491 tbl->action++;
1492 if (tbl->action > IL_SISO_SWITCH_GI)
1493 tbl->action = IL_SISO_SWITCH_ANTENNA1;
1494
1495 if (tbl->action == start_action)
1496 break;
1497 }
1498 search_tbl->lq_type = LQ_NONE;
1499 return 0;
1500
1501out:
1502 lq_sta->search_better_tbl = 1;
1503 tbl->action++;
1504 if (tbl->action > IL_SISO_SWITCH_GI)
1505 tbl->action = IL_SISO_SWITCH_ANTENNA1;
1506 if (update_search_tbl_counter)
1507 search_tbl->action = tbl->action;
1508
1509 return 0;
1510}
1511
1512/*
1513 * Try to switch to new modulation mode from MIMO2
1514 */
1515static int
1516il4965_rs_move_mimo2_to_other(struct il_priv *il, struct il_lq_sta *lq_sta,
1517 struct ieee80211_conf *conf,
1518 struct ieee80211_sta *sta, int idx)
1519{
1520 s8 is_green = lq_sta->is_green;
1521 struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1522 struct il_scale_tbl_info *search_tbl =
1523 &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
1524 struct il_rate_scale_data *win = &(tbl->win[idx]);
1525 struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
1526 u32 sz =
1527 (sizeof(struct il_scale_tbl_info) -
1528 (sizeof(struct il_rate_scale_data) * RATE_COUNT));
1529 u8 start_action;
1530 u8 valid_tx_ant = il->hw_params.valid_tx_ant;
1531 u8 tx_chains_num = il->hw_params.tx_chains_num;
1532 u8 update_search_tbl_counter = 0;
1533 int ret;
1534
1535 start_action = tbl->action;
1536 for (;;) {
1537 lq_sta->action_counter++;
1538 switch (tbl->action) {
1539 case IL_MIMO2_SWITCH_ANTENNA1:
1540 case IL_MIMO2_SWITCH_ANTENNA2:
1541 D_RATE("LQ: MIMO2 toggle Antennas\n");
1542
1543 if (tx_chains_num <= 2)
1544 break;
1545
1546 if (win->success_ratio >= IL_RS_GOOD_RATIO)
1547 break;
1548
1549 memcpy(search_tbl, tbl, sz);
1550 if (il4965_rs_toggle_antenna
1551 (valid_tx_ant, &search_tbl->current_rate,
1552 search_tbl)) {
1553 update_search_tbl_counter = 1;
1554 goto out;
1555 }
1556 break;
1557 case IL_MIMO2_SWITCH_SISO_A:
1558 case IL_MIMO2_SWITCH_SISO_B:
1559 case IL_MIMO2_SWITCH_SISO_C:
1560 D_RATE("LQ: MIMO2 switch to SISO\n");
1561
1562 /* Set up new search table for SISO */
1563 memcpy(search_tbl, tbl, sz);
1564
1565 if (tbl->action == IL_MIMO2_SWITCH_SISO_A)
1566 search_tbl->ant_type = ANT_A;
1567 else if (tbl->action == IL_MIMO2_SWITCH_SISO_B)
1568 search_tbl->ant_type = ANT_B;
1569 else
1570 search_tbl->ant_type = ANT_C;
1571
1572 if (!il4965_rs_is_valid_ant
1573 (valid_tx_ant, search_tbl->ant_type))
1574 break;
1575
1576 ret =
1577 il4965_rs_switch_to_siso(il, lq_sta, conf, sta,
1578 search_tbl, idx);
1579 if (!ret)
1580 goto out;
1581
1582 break;
1583
1584 case IL_MIMO2_SWITCH_GI:
1585 if (!tbl->is_ht40 &&
1586 !(ht_cap->cap & IEEE80211_HT_CAP_SGI_20))
1587 break;
1588 if (tbl->is_ht40 &&
1589 !(ht_cap->cap & IEEE80211_HT_CAP_SGI_40))
1590 break;
1591
1592 D_RATE("LQ: MIMO2 toggle SGI/NGI\n");
1593
1594 /* Set up new search table for MIMO2 */
1595 memcpy(search_tbl, tbl, sz);
1596 search_tbl->is_SGI = !tbl->is_SGI;
1597 il4965_rs_set_expected_tpt_table(lq_sta, search_tbl);
1598 /*
1599 * If active table already uses the fastest possible
1600 * modulation (dual stream with short guard interval),
1601 * and it's working well, there's no need to look
1602 * for a better type of modulation!
1603 */
1604 if (tbl->is_SGI) {
1605 s32 tpt = lq_sta->last_tpt / 100;
1606 if (tpt >= search_tbl->expected_tpt[idx])
1607 break;
1608 }
1609 search_tbl->current_rate =
1610 il4965_rate_n_flags_from_tbl(il, search_tbl, idx,
1611 is_green);
1612 update_search_tbl_counter = 1;
1613 goto out;
1614
1615 }
1616 tbl->action++;
1617 if (tbl->action > IL_MIMO2_SWITCH_GI)
1618 tbl->action = IL_MIMO2_SWITCH_ANTENNA1;
1619
1620 if (tbl->action == start_action)
1621 break;
1622 }
1623 search_tbl->lq_type = LQ_NONE;
1624 return 0;
1625out:
1626 lq_sta->search_better_tbl = 1;
1627 tbl->action++;
1628 if (tbl->action > IL_MIMO2_SWITCH_GI)
1629 tbl->action = IL_MIMO2_SWITCH_ANTENNA1;
1630 if (update_search_tbl_counter)
1631 search_tbl->action = tbl->action;
1632
1633 return 0;
1634
1635}
1636
1637/*
1638 * Check whether we should continue using same modulation mode, or
1639 * begin search for a new mode, based on:
1640 * 1) # tx successes or failures while using this mode
1641 * 2) # times calling this function
1642 * 3) elapsed time in this mode (not used, for now)
1643 */
1644static void
1645il4965_rs_stay_in_table(struct il_lq_sta *lq_sta, bool force_search)
1646{
1647 struct il_scale_tbl_info *tbl;
1648 int i;
1649 int active_tbl;
1650 int flush_interval_passed = 0;
1651 struct il_priv *il;
1652
1653 il = lq_sta->drv;
1654 active_tbl = lq_sta->active_tbl;
1655
1656 tbl = &(lq_sta->lq_info[active_tbl]);
1657
1658 /* If we've been disallowing search, see if we should now allow it */
1659 if (lq_sta->stay_in_tbl) {
1660
1661 /* Elapsed time using current modulation mode */
1662 if (lq_sta->flush_timer)
1663 flush_interval_passed =
1664 time_after(jiffies,
1665 (unsigned long)(lq_sta->flush_timer +
1666 RATE_SCALE_FLUSH_INTVL));
1667
1668 /*
1669 * Check if we should allow search for new modulation mode.
1670 * If many frames have failed or succeeded, or we've used
1671 * this same modulation for a long time, allow search, and
1672 * reset history stats that keep track of whether we should
1673 * allow a new search. Also (below) reset all bitmaps and
1674 * stats in active history.
1675 */
1676 if (force_search ||
1677 lq_sta->total_failed > lq_sta->max_failure_limit ||
1678 lq_sta->total_success > lq_sta->max_success_limit ||
1679 (!lq_sta->search_better_tbl && lq_sta->flush_timer &&
1680 flush_interval_passed)) {
1681 D_RATE("LQ: stay is expired %d %d %d\n",
1682 lq_sta->total_failed, lq_sta->total_success,
1683 flush_interval_passed);
1684
1685 /* Allow search for new mode */
1686 lq_sta->stay_in_tbl = 0; /* only place reset */
1687 lq_sta->total_failed = 0;
1688 lq_sta->total_success = 0;
1689 lq_sta->flush_timer = 0;
1690
1691 /*
1692 * Else if we've used this modulation mode enough repetitions
1693 * (regardless of elapsed time or success/failure), reset
1694 * history bitmaps and rate-specific stats for all rates in
1695 * active table.
1696 */
1697 } else {
1698 lq_sta->table_count++;
1699 if (lq_sta->table_count >= lq_sta->table_count_limit) {
1700 lq_sta->table_count = 0;
1701
1702 D_RATE("LQ: stay in table clear win\n");
1703 for (i = 0; i < RATE_COUNT; i++)
1704 il4965_rs_rate_scale_clear_win(&
1705 (tbl->
1706 win
1707 [i]));
1708 }
1709 }
1710
1711 /* If transitioning to allow "search", reset all history
1712 * bitmaps and stats in active table (this will become the new
1713 * "search" table). */
1714 if (!lq_sta->stay_in_tbl) {
1715 for (i = 0; i < RATE_COUNT; i++)
1716 il4965_rs_rate_scale_clear_win(&(tbl->win[i]));
1717 }
1718 }
1719}
1720
1721/*
1722 * setup rate table in uCode
1723 */
1724static void
1725il4965_rs_update_rate_tbl(struct il_priv *il, struct il_lq_sta *lq_sta,
1726 struct il_scale_tbl_info *tbl, int idx, u8 is_green)
1727{
1728 u32 rate;
1729
1730 /* Update uCode's rate table. */
1731 rate = il4965_rate_n_flags_from_tbl(il, tbl, idx, is_green);
1732 il4965_rs_fill_link_cmd(il, lq_sta, rate);
1733 il_send_lq_cmd(il, &lq_sta->lq, CMD_ASYNC, false);
1734}
1735
1736/*
1737 * Do rate scaling and search for new modulation mode.
1738 */
1739static void
1740il4965_rs_rate_scale_perform(struct il_priv *il, struct sk_buff *skb,
1741 struct ieee80211_sta *sta,
1742 struct il_lq_sta *lq_sta)
1743{
1744 struct ieee80211_hw *hw = il->hw;
1745 struct ieee80211_conf *conf = &hw->conf;
1746 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1747 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
1748 int low = RATE_INVALID;
1749 int high = RATE_INVALID;
1750 int idx;
1751 int i;
1752 struct il_rate_scale_data *win = NULL;
1753 int current_tpt = IL_INVALID_VALUE;
1754 int low_tpt = IL_INVALID_VALUE;
1755 int high_tpt = IL_INVALID_VALUE;
1756 u32 fail_count;
1757 s8 scale_action = 0;
1758 u16 rate_mask;
1759 u8 update_lq = 0;
1760 struct il_scale_tbl_info *tbl, *tbl1;
1761 u16 rate_scale_idx_msk = 0;
1762 u8 is_green = 0;
1763 u8 active_tbl = 0;
1764 u8 done_search = 0;
1765 u16 high_low;
1766 s32 sr;
1767 u8 tid = MAX_TID_COUNT;
1768 struct il_tid_data *tid_data;
1769
1770 D_RATE("rate scale calculate new rate for skb\n");
1771
1772 /* Send management frames and NO_ACK data using lowest rate. */
1773 /* TODO: this could probably be improved.. */
1774 if (!ieee80211_is_data(hdr->frame_control) ||
1775 (info->flags & IEEE80211_TX_CTL_NO_ACK))
1776 return;
1777
1778 lq_sta->supp_rates = sta->supp_rates[lq_sta->band];
1779
1780 tid = il4965_rs_tl_add_packet(lq_sta, hdr);
1781 if (tid != MAX_TID_COUNT && (lq_sta->tx_agg_tid_en & (1 << tid))) {
1782 tid_data = &il->stations[lq_sta->lq.sta_id].tid[tid];
1783 if (tid_data->agg.state == IL_AGG_OFF)
1784 lq_sta->is_agg = 0;
1785 else
1786 lq_sta->is_agg = 1;
1787 } else
1788 lq_sta->is_agg = 0;
1789
1790 /*
1791 * Select rate-scale / modulation-mode table to work with in
1792 * the rest of this function: "search" if searching for better
1793 * modulation mode, or "active" if doing rate scaling within a mode.
1794 */
1795 if (!lq_sta->search_better_tbl)
1796 active_tbl = lq_sta->active_tbl;
1797 else
1798 active_tbl = 1 - lq_sta->active_tbl;
1799
1800 tbl = &(lq_sta->lq_info[active_tbl]);
1801 if (is_legacy(tbl->lq_type))
1802 lq_sta->is_green = 0;
1803 else
1804 lq_sta->is_green = il4965_rs_use_green(il, sta);
1805 is_green = lq_sta->is_green;
1806
1807 /* current tx rate */
1808 idx = lq_sta->last_txrate_idx;
1809
1810 D_RATE("Rate scale idx %d for type %d\n", idx, tbl->lq_type);
1811
1812 /* rates available for this association, and for modulation mode */
1813 rate_mask = il4965_rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
1814
1815 D_RATE("mask 0x%04X\n", rate_mask);
1816
1817 /* mask with station rate restriction */
1818 if (is_legacy(tbl->lq_type)) {
1819 if (lq_sta->band == IEEE80211_BAND_5GHZ)
1820 /* supp_rates has no CCK bits in A mode */
1821 rate_scale_idx_msk =
1822 (u16) (rate_mask &
1823 (lq_sta->supp_rates << IL_FIRST_OFDM_RATE));
1824 else
1825 rate_scale_idx_msk =
1826 (u16) (rate_mask & lq_sta->supp_rates);
1827
1828 } else
1829 rate_scale_idx_msk = rate_mask;
1830
1831 if (!rate_scale_idx_msk)
1832 rate_scale_idx_msk = rate_mask;
1833
1834 if (!((1 << idx) & rate_scale_idx_msk)) {
1835 IL_ERR("Current Rate is not valid\n");
1836 if (lq_sta->search_better_tbl) {
1837 /* revert to active table if search table is not valid */
1838 tbl->lq_type = LQ_NONE;
1839 lq_sta->search_better_tbl = 0;
1840 tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
1841 /* get "active" rate info */
1842 idx = il4965_hwrate_to_plcp_idx(tbl->current_rate);
1843 il4965_rs_update_rate_tbl(il, lq_sta, tbl, idx,
1844 is_green);
1845 }
1846 return;
1847 }
1848
1849 /* Get expected throughput table and history win for current rate */
1850 if (!tbl->expected_tpt) {
1851 IL_ERR("tbl->expected_tpt is NULL\n");
1852 return;
1853 }
1854
1855 /* force user max rate if set by user */
1856 if (lq_sta->max_rate_idx != -1 && lq_sta->max_rate_idx < idx) {
1857 idx = lq_sta->max_rate_idx;
1858 update_lq = 1;
1859 win = &(tbl->win[idx]);
1860 goto lq_update;
1861 }
1862
1863 win = &(tbl->win[idx]);
1864
1865 /*
1866 * If there is not enough history to calculate actual average
1867 * throughput, keep analyzing results of more tx frames, without
1868 * changing rate or mode (bypass most of the rest of this function).
1869 * Set up new rate table in uCode only if old rate is not supported
1870 * in current association (use new rate found above).
1871 */
1872 fail_count = win->counter - win->success_counter;
1873 if (fail_count < RATE_MIN_FAILURE_TH &&
1874 win->success_counter < RATE_MIN_SUCCESS_TH) {
1875 D_RATE("LQ: still below TH. succ=%d total=%d " "for idx %d\n",
1876 win->success_counter, win->counter, idx);
1877
1878 /* Can't calculate this yet; not enough history */
1879 win->average_tpt = IL_INVALID_VALUE;
1880
1881 /* Should we stay with this modulation mode,
1882 * or search for a new one? */
1883 il4965_rs_stay_in_table(lq_sta, false);
1884
1885 goto out;
1886 }
1887 /* Else we have enough samples; calculate estimate of
1888 * actual average throughput */
1889 if (win->average_tpt !=
1890 ((win->success_ratio * tbl->expected_tpt[idx] + 64) / 128)) {
1891 IL_ERR("expected_tpt should have been calculated by now\n");
1892 win->average_tpt =
1893 ((win->success_ratio * tbl->expected_tpt[idx] + 64) / 128);
1894 }
1895
1896 /* If we are searching for better modulation mode, check success. */
1897 if (lq_sta->search_better_tbl) {
1898 /* If good success, continue using the "search" mode;
1899 * no need to send new link quality command, since we're
1900 * continuing to use the setup that we've been trying. */
1901 if (win->average_tpt > lq_sta->last_tpt) {
1902
1903 D_RATE("LQ: SWITCHING TO NEW TBL "
1904 "suc=%d cur-tpt=%d old-tpt=%d\n",
1905 win->success_ratio, win->average_tpt,
1906 lq_sta->last_tpt);
1907
1908 if (!is_legacy(tbl->lq_type))
1909 lq_sta->enable_counter = 1;
1910
1911 /* Swap tables; "search" becomes "active" */
1912 lq_sta->active_tbl = active_tbl;
1913 current_tpt = win->average_tpt;
1914
1915 /* Else poor success; go back to mode in "active" table */
1916 } else {
1917
1918 D_RATE("LQ: GOING BACK TO THE OLD TBL "
1919 "suc=%d cur-tpt=%d old-tpt=%d\n",
1920 win->success_ratio, win->average_tpt,
1921 lq_sta->last_tpt);
1922
1923 /* Nullify "search" table */
1924 tbl->lq_type = LQ_NONE;
1925
1926 /* Revert to "active" table */
1927 active_tbl = lq_sta->active_tbl;
1928 tbl = &(lq_sta->lq_info[active_tbl]);
1929
1930 /* Revert to "active" rate and throughput info */
1931 idx = il4965_hwrate_to_plcp_idx(tbl->current_rate);
1932 current_tpt = lq_sta->last_tpt;
1933
1934 /* Need to set up a new rate table in uCode */
1935 update_lq = 1;
1936 }
1937
1938 /* Either way, we've made a decision; modulation mode
1939 * search is done, allow rate adjustment next time. */
1940 lq_sta->search_better_tbl = 0;
1941 done_search = 1; /* Don't switch modes below! */
1942 goto lq_update;
1943 }
1944
1945 /* (Else) not in search of better modulation mode, try for better
1946 * starting rate, while staying in this mode. */
1947 high_low =
1948 il4965_rs_get_adjacent_rate(il, idx, rate_scale_idx_msk,
1949 tbl->lq_type);
1950 low = high_low & 0xff;
1951 high = (high_low >> 8) & 0xff;
1952
1953 /* If user set max rate, dont allow higher than user constrain */
1954 if (lq_sta->max_rate_idx != -1 && lq_sta->max_rate_idx < high)
1955 high = RATE_INVALID;
1956
1957 sr = win->success_ratio;
1958
1959 /* Collect measured throughputs for current and adjacent rates */
1960 current_tpt = win->average_tpt;
1961 if (low != RATE_INVALID)
1962 low_tpt = tbl->win[low].average_tpt;
1963 if (high != RATE_INVALID)
1964 high_tpt = tbl->win[high].average_tpt;
1965
1966 scale_action = 0;
1967
1968 /* Too many failures, decrease rate */
1969 if (sr <= RATE_DECREASE_TH || current_tpt == 0) {
1970 D_RATE("decrease rate because of low success_ratio\n");
1971 scale_action = -1;
1972
1973 /* No throughput measured yet for adjacent rates; try increase. */
1974 } else if (low_tpt == IL_INVALID_VALUE && high_tpt == IL_INVALID_VALUE) {
1975
1976 if (high != RATE_INVALID && sr >= RATE_INCREASE_TH)
1977 scale_action = 1;
1978 else if (low != RATE_INVALID)
1979 scale_action = 0;
1980 }
1981
1982 /* Both adjacent throughputs are measured, but neither one has better
1983 * throughput; we're using the best rate, don't change it! */
1984 else if (low_tpt != IL_INVALID_VALUE && high_tpt != IL_INVALID_VALUE &&
1985 low_tpt < current_tpt && high_tpt < current_tpt)
1986 scale_action = 0;
1987
1988 /* At least one adjacent rate's throughput is measured,
1989 * and may have better performance. */
1990 else {
1991 /* Higher adjacent rate's throughput is measured */
1992 if (high_tpt != IL_INVALID_VALUE) {
1993 /* Higher rate has better throughput */
1994 if (high_tpt > current_tpt && sr >= RATE_INCREASE_TH)
1995 scale_action = 1;
1996 else
1997 scale_action = 0;
1998
1999 /* Lower adjacent rate's throughput is measured */
2000 } else if (low_tpt != IL_INVALID_VALUE) {
2001 /* Lower rate has better throughput */
2002 if (low_tpt > current_tpt) {
2003 D_RATE("decrease rate because of low tpt\n");
2004 scale_action = -1;
2005 } else if (sr >= RATE_INCREASE_TH) {
2006 scale_action = 1;
2007 }
2008 }
2009 }
2010
2011 /* Sanity check; asked for decrease, but success rate or throughput
2012 * has been good at old rate. Don't change it. */
2013 if (scale_action == -1 && low != RATE_INVALID &&
2014 (sr > RATE_HIGH_TH || current_tpt > 100 * tbl->expected_tpt[low]))
2015 scale_action = 0;
2016
2017 switch (scale_action) {
2018 case -1:
2019 /* Decrease starting rate, update uCode's rate table */
2020 if (low != RATE_INVALID) {
2021 update_lq = 1;
2022 idx = low;
2023 }
2024
2025 break;
2026 case 1:
2027 /* Increase starting rate, update uCode's rate table */
2028 if (high != RATE_INVALID) {
2029 update_lq = 1;
2030 idx = high;
2031 }
2032
2033 break;
2034 case 0:
2035 /* No change */
2036 default:
2037 break;
2038 }
2039
2040 D_RATE("choose rate scale idx %d action %d low %d " "high %d type %d\n",
2041 idx, scale_action, low, high, tbl->lq_type);
2042
2043lq_update:
2044 /* Replace uCode's rate table for the destination station. */
2045 if (update_lq)
2046 il4965_rs_update_rate_tbl(il, lq_sta, tbl, idx, is_green);
2047
2048 /* Should we stay with this modulation mode,
2049 * or search for a new one? */
2050 il4965_rs_stay_in_table(lq_sta, false);
2051
2052 /*
2053 * Search for new modulation mode if we're:
2054 * 1) Not changing rates right now
2055 * 2) Not just finishing up a search
2056 * 3) Allowing a new search
2057 */
2058 if (!update_lq && !done_search && !lq_sta->stay_in_tbl && win->counter) {
2059 /* Save current throughput to compare with "search" throughput */
2060 lq_sta->last_tpt = current_tpt;
2061
2062 /* Select a new "search" modulation mode to try.
2063 * If one is found, set up the new "search" table. */
2064 if (is_legacy(tbl->lq_type))
2065 il4965_rs_move_legacy_other(il, lq_sta, conf, sta, idx);
2066 else if (is_siso(tbl->lq_type))
2067 il4965_rs_move_siso_to_other(il, lq_sta, conf, sta,
2068 idx);
2069 else /* (is_mimo2(tbl->lq_type)) */
2070 il4965_rs_move_mimo2_to_other(il, lq_sta, conf, sta,
2071 idx);
2072
2073 /* If new "search" mode was selected, set up in uCode table */
2074 if (lq_sta->search_better_tbl) {
2075 /* Access the "search" table, clear its history. */
2076 tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]);
2077 for (i = 0; i < RATE_COUNT; i++)
2078 il4965_rs_rate_scale_clear_win(&(tbl->win[i]));
2079
2080 /* Use new "search" start rate */
2081 idx = il4965_hwrate_to_plcp_idx(tbl->current_rate);
2082
2083 D_RATE("Switch current mcs: %X idx: %d\n",
2084 tbl->current_rate, idx);
2085 il4965_rs_fill_link_cmd(il, lq_sta, tbl->current_rate);
2086 il_send_lq_cmd(il, &lq_sta->lq, CMD_ASYNC, false);
2087 } else
2088 done_search = 1;
2089 }
2090
2091 if (done_search && !lq_sta->stay_in_tbl) {
2092 /* If the "active" (non-search) mode was legacy,
2093 * and we've tried switching antennas,
2094 * but we haven't been able to try HT modes (not available),
2095 * stay with best antenna legacy modulation for a while
2096 * before next round of mode comparisons. */
2097 tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
2098 if (is_legacy(tbl1->lq_type) && !conf_is_ht(conf) &&
2099 lq_sta->action_counter > tbl1->max_search) {
2100 D_RATE("LQ: STAY in legacy table\n");
2101 il4965_rs_set_stay_in_table(il, 1, lq_sta);
2102 }
2103
2104 /* If we're in an HT mode, and all 3 mode switch actions
2105 * have been tried and compared, stay in this best modulation
2106 * mode for a while before next round of mode comparisons. */
2107 if (lq_sta->enable_counter &&
2108 lq_sta->action_counter >= tbl1->max_search) {
2109 if (lq_sta->last_tpt > IL_AGG_TPT_THREHOLD &&
2110 (lq_sta->tx_agg_tid_en & (1 << tid)) &&
2111 tid != MAX_TID_COUNT) {
2112 tid_data =
2113 &il->stations[lq_sta->lq.sta_id].tid[tid];
2114 if (tid_data->agg.state == IL_AGG_OFF) {
2115 D_RATE("try to aggregate tid %d\n",
2116 tid);
2117 il4965_rs_tl_turn_on_agg(il, tid,
2118 lq_sta, sta);
2119 }
2120 }
2121 il4965_rs_set_stay_in_table(il, 0, lq_sta);
2122 }
2123 }
2124
2125out:
2126 tbl->current_rate =
2127 il4965_rate_n_flags_from_tbl(il, tbl, idx, is_green);
2128 i = idx;
2129 lq_sta->last_txrate_idx = i;
2130}
2131
2132/**
2133 * il4965_rs_initialize_lq - Initialize a station's hardware rate table
2134 *
2135 * The uCode's station table contains a table of fallback rates
2136 * for automatic fallback during transmission.
2137 *
2138 * NOTE: This sets up a default set of values. These will be replaced later
2139 * if the driver's iwl-4965-rs rate scaling algorithm is used, instead of
2140 * rc80211_simple.
2141 *
2142 * NOTE: Run C_ADD_STA command to set up station table entry, before
2143 * calling this function (which runs C_TX_LINK_QUALITY_CMD,
2144 * which requires station table entry to exist).
2145 */
2146static void
2147il4965_rs_initialize_lq(struct il_priv *il, struct ieee80211_conf *conf,
2148 struct ieee80211_sta *sta, struct il_lq_sta *lq_sta)
2149{
2150 struct il_scale_tbl_info *tbl;
2151 int rate_idx;
2152 int i;
2153 u32 rate;
2154 u8 use_green;
2155 u8 active_tbl = 0;
2156 u8 valid_tx_ant;
2157 struct il_station_priv *sta_priv;
2158
2159 if (!sta || !lq_sta)
2160 return;
2161
2162 use_green = il4965_rs_use_green(il, sta);
2163 sta_priv = (void *)sta->drv_priv;
2164
2165 i = lq_sta->last_txrate_idx;
2166
2167 valid_tx_ant = il->hw_params.valid_tx_ant;
2168
2169 if (!lq_sta->search_better_tbl)
2170 active_tbl = lq_sta->active_tbl;
2171 else
2172 active_tbl = 1 - lq_sta->active_tbl;
2173
2174 tbl = &(lq_sta->lq_info[active_tbl]);
2175
2176 if (i < 0 || i >= RATE_COUNT)
2177 i = 0;
2178
2179 rate = il_rates[i].plcp;
2180 tbl->ant_type = il4965_first_antenna(valid_tx_ant);
2181 rate |= tbl->ant_type << RATE_MCS_ANT_POS;
2182
2183 if (i >= IL_FIRST_CCK_RATE && i <= IL_LAST_CCK_RATE)
2184 rate |= RATE_MCS_CCK_MSK;
2185
2186 il4965_rs_get_tbl_info_from_mcs(rate, il->band, tbl, &rate_idx);
2187 if (!il4965_rs_is_valid_ant(valid_tx_ant, tbl->ant_type))
2188 il4965_rs_toggle_antenna(valid_tx_ant, &rate, tbl);
2189
2190 rate = il4965_rate_n_flags_from_tbl(il, tbl, rate_idx, use_green);
2191 tbl->current_rate = rate;
2192 il4965_rs_set_expected_tpt_table(lq_sta, tbl);
2193 il4965_rs_fill_link_cmd(NULL, lq_sta, rate);
2194 il->stations[lq_sta->lq.sta_id].lq = &lq_sta->lq;
2195 il_send_lq_cmd(il, &lq_sta->lq, CMD_SYNC, true);
2196}
2197
2198static void
2199il4965_rs_get_rate(void *il_r, struct ieee80211_sta *sta, void *il_sta,
2200 struct ieee80211_tx_rate_control *txrc)
2201{
2202
2203 struct sk_buff *skb = txrc->skb;
2204 struct ieee80211_supported_band *sband = txrc->sband;
2205 struct il_priv *il __maybe_unused = (struct il_priv *)il_r;
2206 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
2207 struct il_lq_sta *lq_sta = il_sta;
2208 int rate_idx;
2209
2210 D_RATE("rate scale calculate new rate for skb\n");
2211
2212 /* Get max rate if user set max rate */
2213 if (lq_sta) {
2214 lq_sta->max_rate_idx = txrc->max_rate_idx;
2215 if (sband->band == IEEE80211_BAND_5GHZ &&
2216 lq_sta->max_rate_idx != -1)
2217 lq_sta->max_rate_idx += IL_FIRST_OFDM_RATE;
2218 if (lq_sta->max_rate_idx < 0 ||
2219 lq_sta->max_rate_idx >= RATE_COUNT)
2220 lq_sta->max_rate_idx = -1;
2221 }
2222
2223 /* Treat uninitialized rate scaling data same as non-existing. */
2224 if (lq_sta && !lq_sta->drv) {
2225 D_RATE("Rate scaling not initialized yet.\n");
2226 il_sta = NULL;
2227 }
2228
2229 /* Send management frames and NO_ACK data using lowest rate. */
2230 if (rate_control_send_low(sta, il_sta, txrc))
2231 return;
2232
2233 if (!lq_sta)
2234 return;
2235
2236 rate_idx = lq_sta->last_txrate_idx;
2237
2238 if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) {
2239 rate_idx -= IL_FIRST_OFDM_RATE;
2240 /* 6M and 9M shared same MCS idx */
2241 rate_idx = (rate_idx > 0) ? (rate_idx - 1) : 0;
2242 if (il4965_rs_extract_rate(lq_sta->last_rate_n_flags) >=
2243 RATE_MIMO2_6M_PLCP)
2244 rate_idx = rate_idx + MCS_IDX_PER_STREAM;
2245 info->control.rates[0].flags = IEEE80211_TX_RC_MCS;
2246 if (lq_sta->last_rate_n_flags & RATE_MCS_SGI_MSK)
2247 info->control.rates[0].flags |=
2248 IEEE80211_TX_RC_SHORT_GI;
2249 if (lq_sta->last_rate_n_flags & RATE_MCS_DUP_MSK)
2250 info->control.rates[0].flags |=
2251 IEEE80211_TX_RC_DUP_DATA;
2252 if (lq_sta->last_rate_n_flags & RATE_MCS_HT40_MSK)
2253 info->control.rates[0].flags |=
2254 IEEE80211_TX_RC_40_MHZ_WIDTH;
2255 if (lq_sta->last_rate_n_flags & RATE_MCS_GF_MSK)
2256 info->control.rates[0].flags |=
2257 IEEE80211_TX_RC_GREEN_FIELD;
2258 } else {
2259 /* Check for invalid rates */
2260 if (rate_idx < 0 || rate_idx >= RATE_COUNT_LEGACY ||
2261 (sband->band == IEEE80211_BAND_5GHZ &&
2262 rate_idx < IL_FIRST_OFDM_RATE))
2263 rate_idx = rate_lowest_index(sband, sta);
2264 /* On valid 5 GHz rate, adjust idx */
2265 else if (sband->band == IEEE80211_BAND_5GHZ)
2266 rate_idx -= IL_FIRST_OFDM_RATE;
2267 info->control.rates[0].flags = 0;
2268 }
2269 info->control.rates[0].idx = rate_idx;
2270 info->control.rates[0].count = 1;
2271}
2272
2273static void *
2274il4965_rs_alloc_sta(void *il_rate, struct ieee80211_sta *sta, gfp_t gfp)
2275{
2276 struct il_station_priv *sta_priv =
2277 (struct il_station_priv *)sta->drv_priv;
2278 struct il_priv *il;
2279
2280 il = (struct il_priv *)il_rate;
2281 D_RATE("create station rate scale win\n");
2282
2283 return &sta_priv->lq_sta;
2284}
2285
2286/*
2287 * Called after adding a new station to initialize rate scaling
2288 */
2289void
2290il4965_rs_rate_init(struct il_priv *il, struct ieee80211_sta *sta, u8 sta_id)
2291{
2292 int i, j;
2293 struct ieee80211_hw *hw = il->hw;
2294 struct ieee80211_conf *conf = &il->hw->conf;
2295 struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
2296 struct il_station_priv *sta_priv;
2297 struct il_lq_sta *lq_sta;
2298 struct ieee80211_supported_band *sband;
2299
2300 sta_priv = (struct il_station_priv *)sta->drv_priv;
2301 lq_sta = &sta_priv->lq_sta;
2302 sband = hw->wiphy->bands[conf->chandef.chan->band];
2303
2304 lq_sta->lq.sta_id = sta_id;
2305
2306 for (j = 0; j < LQ_SIZE; j++)
2307 for (i = 0; i < RATE_COUNT; i++)
2308 il4965_rs_rate_scale_clear_win(&lq_sta->lq_info[j].
2309 win[i]);
2310
2311 lq_sta->flush_timer = 0;
2312 lq_sta->supp_rates = sta->supp_rates[sband->band];
2313 for (j = 0; j < LQ_SIZE; j++)
2314 for (i = 0; i < RATE_COUNT; i++)
2315 il4965_rs_rate_scale_clear_win(&lq_sta->lq_info[j].
2316 win[i]);
2317
2318 D_RATE("LQ:" "*** rate scale station global init for station %d ***\n",
2319 sta_id);
2320 /* TODO: what is a good starting rate for STA? About middle? Maybe not
2321 * the lowest or the highest rate.. Could consider using RSSI from
2322 * previous packets? Need to have IEEE 802.1X auth succeed immediately
2323 * after assoc.. */
2324
2325 lq_sta->is_dup = 0;
2326 lq_sta->max_rate_idx = -1;
2327 lq_sta->missed_rate_counter = IL_MISSED_RATE_MAX;
2328 lq_sta->is_green = il4965_rs_use_green(il, sta);
2329 lq_sta->active_legacy_rate = il->active_rate & ~(0x1000);
2330 lq_sta->band = il->band;
2331 /*
2332 * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
2333 * supp_rates[] does not; shift to convert format, force 9 MBits off.
2334 */
2335 lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1;
2336 lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1;
2337 lq_sta->active_siso_rate &= ~((u16) 0x2);
2338 lq_sta->active_siso_rate <<= IL_FIRST_OFDM_RATE;
2339
2340 /* Same here */
2341 lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1;
2342 lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1;
2343 lq_sta->active_mimo2_rate &= ~((u16) 0x2);
2344 lq_sta->active_mimo2_rate <<= IL_FIRST_OFDM_RATE;
2345
2346 /* These values will be overridden later */
2347 lq_sta->lq.general_params.single_stream_ant_msk =
2348 il4965_first_antenna(il->hw_params.valid_tx_ant);
2349 lq_sta->lq.general_params.dual_stream_ant_msk =
2350 il->hw_params.valid_tx_ant & ~il4965_first_antenna(il->hw_params.
2351 valid_tx_ant);
2352 if (!lq_sta->lq.general_params.dual_stream_ant_msk) {
2353 lq_sta->lq.general_params.dual_stream_ant_msk = ANT_AB;
2354 } else if (il4965_num_of_ant(il->hw_params.valid_tx_ant) == 2) {
2355 lq_sta->lq.general_params.dual_stream_ant_msk =
2356 il->hw_params.valid_tx_ant;
2357 }
2358
2359 /* as default allow aggregation for all tids */
2360 lq_sta->tx_agg_tid_en = IL_AGG_ALL_TID;
2361 lq_sta->drv = il;
2362
2363 /* Set last_txrate_idx to lowest rate */
2364 lq_sta->last_txrate_idx = rate_lowest_index(sband, sta);
2365 if (sband->band == IEEE80211_BAND_5GHZ)
2366 lq_sta->last_txrate_idx += IL_FIRST_OFDM_RATE;
2367 lq_sta->is_agg = 0;
2368
2369#ifdef CONFIG_MAC80211_DEBUGFS
2370 lq_sta->dbg_fixed_rate = 0;
2371#endif
2372
2373 il4965_rs_initialize_lq(il, conf, sta, lq_sta);
2374}
2375
2376static void
2377il4965_rs_fill_link_cmd(struct il_priv *il, struct il_lq_sta *lq_sta,
2378 u32 new_rate)
2379{
2380 struct il_scale_tbl_info tbl_type;
2381 int idx = 0;
2382 int rate_idx;
2383 int repeat_rate = 0;
2384 u8 ant_toggle_cnt = 0;
2385 u8 use_ht_possible = 1;
2386 u8 valid_tx_ant = 0;
2387 struct il_link_quality_cmd *lq_cmd = &lq_sta->lq;
2388
2389 /* Override starting rate (idx 0) if needed for debug purposes */
2390 il4965_rs_dbgfs_set_mcs(lq_sta, &new_rate, idx);
2391
2392 /* Interpret new_rate (rate_n_flags) */
2393 il4965_rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type,
2394 &rate_idx);
2395
2396 /* How many times should we repeat the initial rate? */
2397 if (is_legacy(tbl_type.lq_type)) {
2398 ant_toggle_cnt = 1;
2399 repeat_rate = IL_NUMBER_TRY;
2400 } else {
2401 repeat_rate = IL_HT_NUMBER_TRY;
2402 }
2403
2404 lq_cmd->general_params.mimo_delimiter =
2405 is_mimo(tbl_type.lq_type) ? 1 : 0;
2406
2407 /* Fill 1st table entry (idx 0) */
2408 lq_cmd->rs_table[idx].rate_n_flags = cpu_to_le32(new_rate);
2409
2410 if (il4965_num_of_ant(tbl_type.ant_type) == 1) {
2411 lq_cmd->general_params.single_stream_ant_msk =
2412 tbl_type.ant_type;
2413 } else if (il4965_num_of_ant(tbl_type.ant_type) == 2) {
2414 lq_cmd->general_params.dual_stream_ant_msk = tbl_type.ant_type;
2415 }
2416 /* otherwise we don't modify the existing value */
2417 idx++;
2418 repeat_rate--;
2419 if (il)
2420 valid_tx_ant = il->hw_params.valid_tx_ant;
2421
2422 /* Fill rest of rate table */
2423 while (idx < LINK_QUAL_MAX_RETRY_NUM) {
2424 /* Repeat initial/next rate.
2425 * For legacy IL_NUMBER_TRY == 1, this loop will not execute.
2426 * For HT IL_HT_NUMBER_TRY == 3, this executes twice. */
2427 while (repeat_rate > 0 && idx < LINK_QUAL_MAX_RETRY_NUM) {
2428 if (is_legacy(tbl_type.lq_type)) {
2429 if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
2430 ant_toggle_cnt++;
2431 else if (il &&
2432 il4965_rs_toggle_antenna(valid_tx_ant,
2433 &new_rate,
2434 &tbl_type))
2435 ant_toggle_cnt = 1;
2436 }
2437
2438 /* Override next rate if needed for debug purposes */
2439 il4965_rs_dbgfs_set_mcs(lq_sta, &new_rate, idx);
2440
2441 /* Fill next table entry */
2442 lq_cmd->rs_table[idx].rate_n_flags =
2443 cpu_to_le32(new_rate);
2444 repeat_rate--;
2445 idx++;
2446 }
2447
2448 il4965_rs_get_tbl_info_from_mcs(new_rate, lq_sta->band,
2449 &tbl_type, &rate_idx);
2450
2451 /* Indicate to uCode which entries might be MIMO.
2452 * If initial rate was MIMO, this will finally end up
2453 * as (IL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */
2454 if (is_mimo(tbl_type.lq_type))
2455 lq_cmd->general_params.mimo_delimiter = idx;
2456
2457 /* Get next rate */
2458 new_rate =
2459 il4965_rs_get_lower_rate(lq_sta, &tbl_type, rate_idx,
2460 use_ht_possible);
2461
2462 /* How many times should we repeat the next rate? */
2463 if (is_legacy(tbl_type.lq_type)) {
2464 if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE)
2465 ant_toggle_cnt++;
2466 else if (il &&
2467 il4965_rs_toggle_antenna(valid_tx_ant,
2468 &new_rate, &tbl_type))
2469 ant_toggle_cnt = 1;
2470
2471 repeat_rate = IL_NUMBER_TRY;
2472 } else {
2473 repeat_rate = IL_HT_NUMBER_TRY;
2474 }
2475
2476 /* Don't allow HT rates after next pass.
2477 * il4965_rs_get_lower_rate() will change type to LQ_A or LQ_G. */
2478 use_ht_possible = 0;
2479
2480 /* Override next rate if needed for debug purposes */
2481 il4965_rs_dbgfs_set_mcs(lq_sta, &new_rate, idx);
2482
2483 /* Fill next table entry */
2484 lq_cmd->rs_table[idx].rate_n_flags = cpu_to_le32(new_rate);
2485
2486 idx++;
2487 repeat_rate--;
2488 }
2489
2490 lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
2491 lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
2492
2493 lq_cmd->agg_params.agg_time_limit =
2494 cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
2495}
2496
2497static void *
2498il4965_rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
2499{
2500 return hw->priv;
2501}
2502
2503/* rate scale requires free function to be implemented */
2504static void
2505il4965_rs_free(void *il_rate)
2506{
2507 return;
2508}
2509
2510static void
2511il4965_rs_free_sta(void *il_r, struct ieee80211_sta *sta, void *il_sta)
2512{
2513 struct il_priv *il __maybe_unused = il_r;
2514
2515 D_RATE("enter\n");
2516 D_RATE("leave\n");
2517}
2518
2519#ifdef CONFIG_MAC80211_DEBUGFS
2520
2521static void
2522il4965_rs_dbgfs_set_mcs(struct il_lq_sta *lq_sta, u32 * rate_n_flags, int idx)
2523{
2524 struct il_priv *il;
2525 u8 valid_tx_ant;
2526 u8 ant_sel_tx;
2527
2528 il = lq_sta->drv;
2529 valid_tx_ant = il->hw_params.valid_tx_ant;
2530 if (lq_sta->dbg_fixed_rate) {
2531 ant_sel_tx =
2532 ((lq_sta->
2533 dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK) >>
2534 RATE_MCS_ANT_POS);
2535 if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) {
2536 *rate_n_flags = lq_sta->dbg_fixed_rate;
2537 D_RATE("Fixed rate ON\n");
2538 } else {
2539 lq_sta->dbg_fixed_rate = 0;
2540 IL_ERR
2541 ("Invalid antenna selection 0x%X, Valid is 0x%X\n",
2542 ant_sel_tx, valid_tx_ant);
2543 D_RATE("Fixed rate OFF\n");
2544 }
2545 } else {
2546 D_RATE("Fixed rate OFF\n");
2547 }
2548}
2549
2550static ssize_t
2551il4965_rs_sta_dbgfs_scale_table_write(struct file *file,
2552 const char __user *user_buf,
2553 size_t count, loff_t *ppos)
2554{
2555 struct il_lq_sta *lq_sta = file->private_data;
2556 struct il_priv *il;
2557 char buf[64];
2558 size_t buf_size;
2559 u32 parsed_rate;
2560
2561 il = lq_sta->drv;
2562 memset(buf, 0, sizeof(buf));
2563 buf_size = min(count, sizeof(buf) - 1);
2564 if (copy_from_user(buf, user_buf, buf_size))
2565 return -EFAULT;
2566
2567 if (sscanf(buf, "%x", &parsed_rate) == 1)
2568 lq_sta->dbg_fixed_rate = parsed_rate;
2569 else
2570 lq_sta->dbg_fixed_rate = 0;
2571
2572 lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */
2573 lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
2574 lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */
2575
2576 D_RATE("sta_id %d rate 0x%X\n", lq_sta->lq.sta_id,
2577 lq_sta->dbg_fixed_rate);
2578
2579 if (lq_sta->dbg_fixed_rate) {
2580 il4965_rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate);
2581 il_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC, false);
2582 }
2583
2584 return count;
2585}
2586
2587static ssize_t
2588il4965_rs_sta_dbgfs_scale_table_read(struct file *file, char __user *user_buf,
2589 size_t count, loff_t *ppos)
2590{
2591 char *buff;
2592 int desc = 0;
2593 int i = 0;
2594 int idx = 0;
2595 ssize_t ret;
2596
2597 struct il_lq_sta *lq_sta = file->private_data;
2598 struct il_priv *il;
2599 struct il_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
2600
2601 il = lq_sta->drv;
2602 buff = kmalloc(1024, GFP_KERNEL);
2603 if (!buff)
2604 return -ENOMEM;
2605
2606 desc += sprintf(buff + desc, "sta_id %d\n", lq_sta->lq.sta_id);
2607 desc +=
2608 sprintf(buff + desc, "failed=%d success=%d rate=0%X\n",
2609 lq_sta->total_failed, lq_sta->total_success,
2610 lq_sta->active_legacy_rate);
2611 desc +=
2612 sprintf(buff + desc, "fixed rate 0x%X\n", lq_sta->dbg_fixed_rate);
2613 desc +=
2614 sprintf(buff + desc, "valid_tx_ant %s%s%s\n",
2615 (il->hw_params.valid_tx_ant & ANT_A) ? "ANT_A," : "",
2616 (il->hw_params.valid_tx_ant & ANT_B) ? "ANT_B," : "",
2617 (il->hw_params.valid_tx_ant & ANT_C) ? "ANT_C" : "");
2618 desc +=
2619 sprintf(buff + desc, "lq type %s\n",
2620 (is_legacy(tbl->lq_type)) ? "legacy" : "HT");
2621 if (is_Ht(tbl->lq_type)) {
2622 desc +=
2623 sprintf(buff + desc, " %s",
2624 (is_siso(tbl->lq_type)) ? "SISO" : "MIMO2");
2625 desc +=
2626 sprintf(buff + desc, " %s",
2627 (tbl->is_ht40) ? "40MHz" : "20MHz");
2628 desc +=
2629 sprintf(buff + desc, " %s %s %s\n",
2630 (tbl->is_SGI) ? "SGI" : "",
2631 (lq_sta->is_green) ? "GF enabled" : "",
2632 (lq_sta->is_agg) ? "AGG on" : "");
2633 }
2634 desc +=
2635 sprintf(buff + desc, "last tx rate=0x%X\n",
2636 lq_sta->last_rate_n_flags);
2637 desc +=
2638 sprintf(buff + desc,
2639 "general:" "flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n",
2640 lq_sta->lq.general_params.flags,
2641 lq_sta->lq.general_params.mimo_delimiter,
2642 lq_sta->lq.general_params.single_stream_ant_msk,
2643 lq_sta->lq.general_params.dual_stream_ant_msk);
2644
2645 desc +=
2646 sprintf(buff + desc,
2647 "agg:"
2648 "time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n",
2649 le16_to_cpu(lq_sta->lq.agg_params.agg_time_limit),
2650 lq_sta->lq.agg_params.agg_dis_start_th,
2651 lq_sta->lq.agg_params.agg_frame_cnt_limit);
2652
2653 desc +=
2654 sprintf(buff + desc,
2655 "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n",
2656 lq_sta->lq.general_params.start_rate_idx[0],
2657 lq_sta->lq.general_params.start_rate_idx[1],
2658 lq_sta->lq.general_params.start_rate_idx[2],
2659 lq_sta->lq.general_params.start_rate_idx[3]);
2660
2661 for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
2662 idx =
2663 il4965_hwrate_to_plcp_idx(le32_to_cpu
2664 (lq_sta->lq.rs_table[i].
2665 rate_n_flags));
2666 if (is_legacy(tbl->lq_type)) {
2667 desc +=
2668 sprintf(buff + desc, " rate[%d] 0x%X %smbps\n", i,
2669 le32_to_cpu(lq_sta->lq.rs_table[i].
2670 rate_n_flags),
2671 il_rate_mcs[idx].mbps);
2672 } else {
2673 desc +=
2674 sprintf(buff + desc, " rate[%d] 0x%X %smbps (%s)\n",
2675 i,
2676 le32_to_cpu(lq_sta->lq.rs_table[i].
2677 rate_n_flags),
2678 il_rate_mcs[idx].mbps,
2679 il_rate_mcs[idx].mcs);
2680 }
2681 }
2682
2683 ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
2684 kfree(buff);
2685 return ret;
2686}
2687
2688static const struct file_operations rs_sta_dbgfs_scale_table_ops = {
2689 .write = il4965_rs_sta_dbgfs_scale_table_write,
2690 .read = il4965_rs_sta_dbgfs_scale_table_read,
2691 .open = simple_open,
2692 .llseek = default_llseek,
2693};
2694
2695static ssize_t
2696il4965_rs_sta_dbgfs_stats_table_read(struct file *file, char __user *user_buf,
2697 size_t count, loff_t *ppos)
2698{
2699 char *buff;
2700 int desc = 0;
2701 int i, j;
2702 ssize_t ret;
2703
2704 struct il_lq_sta *lq_sta = file->private_data;
2705
2706 buff = kmalloc(1024, GFP_KERNEL);
2707 if (!buff)
2708 return -ENOMEM;
2709
2710 for (i = 0; i < LQ_SIZE; i++) {
2711 desc +=
2712 sprintf(buff + desc,
2713 "%s type=%d SGI=%d HT40=%d DUP=%d GF=%d\n"
2714 "rate=0x%X\n", lq_sta->active_tbl == i ? "*" : "x",
2715 lq_sta->lq_info[i].lq_type,
2716 lq_sta->lq_info[i].is_SGI,
2717 lq_sta->lq_info[i].is_ht40,
2718 lq_sta->lq_info[i].is_dup, lq_sta->is_green,
2719 lq_sta->lq_info[i].current_rate);
2720 for (j = 0; j < RATE_COUNT; j++) {
2721 desc +=
2722 sprintf(buff + desc,
2723 "counter=%d success=%d %%=%d\n",
2724 lq_sta->lq_info[i].win[j].counter,
2725 lq_sta->lq_info[i].win[j].success_counter,
2726 lq_sta->lq_info[i].win[j].success_ratio);
2727 }
2728 }
2729 ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc);
2730 kfree(buff);
2731 return ret;
2732}
2733
2734static const struct file_operations rs_sta_dbgfs_stats_table_ops = {
2735 .read = il4965_rs_sta_dbgfs_stats_table_read,
2736 .open = simple_open,
2737 .llseek = default_llseek,
2738};
2739
2740static ssize_t
2741il4965_rs_sta_dbgfs_rate_scale_data_read(struct file *file,
2742 char __user *user_buf, size_t count,
2743 loff_t *ppos)
2744{
2745 char buff[120];
2746 int desc = 0;
2747 struct il_lq_sta *lq_sta = file->private_data;
2748 struct il_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl];
2749
2750 if (is_Ht(tbl->lq_type))
2751 desc +=
2752 sprintf(buff + desc, "Bit Rate= %d Mb/s\n",
2753 tbl->expected_tpt[lq_sta->last_txrate_idx]);
2754 else
2755 desc +=
2756 sprintf(buff + desc, "Bit Rate= %d Mb/s\n",
2757 il_rates[lq_sta->last_txrate_idx].ieee >> 1);
2758
2759 return simple_read_from_buffer(user_buf, count, ppos, buff, desc);
2760}
2761
2762static const struct file_operations rs_sta_dbgfs_rate_scale_data_ops = {
2763 .read = il4965_rs_sta_dbgfs_rate_scale_data_read,
2764 .open = simple_open,
2765 .llseek = default_llseek,
2766};
2767
2768static void
2769il4965_rs_add_debugfs(void *il, void *il_sta, struct dentry *dir)
2770{
2771 struct il_lq_sta *lq_sta = il_sta;
2772 lq_sta->rs_sta_dbgfs_scale_table_file =
2773 debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir,
2774 lq_sta, &rs_sta_dbgfs_scale_table_ops);
2775 lq_sta->rs_sta_dbgfs_stats_table_file =
2776 debugfs_create_file("rate_stats_table", S_IRUSR, dir, lq_sta,
2777 &rs_sta_dbgfs_stats_table_ops);
2778 lq_sta->rs_sta_dbgfs_rate_scale_data_file =
2779 debugfs_create_file("rate_scale_data", S_IRUSR, dir, lq_sta,
2780 &rs_sta_dbgfs_rate_scale_data_ops);
2781 lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file =
2782 debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir,
2783 &lq_sta->tx_agg_tid_en);
2784
2785}
2786
2787static void
2788il4965_rs_remove_debugfs(void *il, void *il_sta)
2789{
2790 struct il_lq_sta *lq_sta = il_sta;
2791 debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file);
2792 debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file);
2793 debugfs_remove(lq_sta->rs_sta_dbgfs_rate_scale_data_file);
2794 debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file);
2795}
2796#endif
2797
2798/*
2799 * Initialization of rate scaling information is done by driver after
2800 * the station is added. Since mac80211 calls this function before a
2801 * station is added we ignore it.
2802 */
2803static void
2804il4965_rs_rate_init_stub(void *il_r, struct ieee80211_supported_band *sband,
2805 struct cfg80211_chan_def *chandef,
2806 struct ieee80211_sta *sta, void *il_sta)
2807{
2808}
2809
2810static const struct rate_control_ops rs_4965_ops = {
2811 .name = IL4965_RS_NAME,
2812 .tx_status = il4965_rs_tx_status,
2813 .get_rate = il4965_rs_get_rate,
2814 .rate_init = il4965_rs_rate_init_stub,
2815 .alloc = il4965_rs_alloc,
2816 .free = il4965_rs_free,
2817 .alloc_sta = il4965_rs_alloc_sta,
2818 .free_sta = il4965_rs_free_sta,
2819#ifdef CONFIG_MAC80211_DEBUGFS
2820 .add_sta_debugfs = il4965_rs_add_debugfs,
2821 .remove_sta_debugfs = il4965_rs_remove_debugfs,
2822#endif
2823};
2824
2825int
2826il4965_rate_control_register(void)
2827{
2828 return ieee80211_rate_control_register(&rs_4965_ops);
2829}
2830
2831void
2832il4965_rate_control_unregister(void)
2833{
2834 ieee80211_rate_control_unregister(&rs_4965_ops);
2835}