Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/******************************************************************************
3 *
4 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5 *
6 * Portions of this file are derived from the ipw3945 project, as well
7 * as portions of the ieee80211 subsystem header files.
8 *
9 * Contact Information:
10 * Intel Linux Wireless <ilw@linux.intel.com>
11 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
12 *
13 *****************************************************************************/
14
15#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
16
17#include <linux/kernel.h>
18#include <linux/module.h>
19#include <linux/init.h>
20#include <linux/pci.h>
21#include <linux/slab.h>
22#include <linux/dma-mapping.h>
23#include <linux/delay.h>
24#include <linux/sched.h>
25#include <linux/skbuff.h>
26#include <linux/netdevice.h>
27#include <linux/firmware.h>
28#include <linux/etherdevice.h>
29#include <linux/if_arp.h>
30
31#include <net/ieee80211_radiotap.h>
32#include <net/mac80211.h>
33
34#include <asm/div64.h>
35
36#define DRV_NAME "iwl3945"
37
38#include "commands.h"
39#include "common.h"
40#include "3945.h"
41#include "iwl-spectrum.h"
42
43/*
44 * module name, copyright, version, etc.
45 */
46
47#define DRV_DESCRIPTION \
48"Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
49
50#ifdef CONFIG_IWLEGACY_DEBUG
51#define VD "d"
52#else
53#define VD
54#endif
55
56/*
57 * add "s" to indicate spectrum measurement included.
58 * we add it here to be consistent with previous releases in which
59 * this was configurable.
60 */
61#define DRV_VERSION IWLWIFI_VERSION VD "s"
62#define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation"
63#define DRV_AUTHOR "<ilw@linux.intel.com>"
64
65MODULE_DESCRIPTION(DRV_DESCRIPTION);
66MODULE_VERSION(DRV_VERSION);
67MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
68MODULE_LICENSE("GPL");
69
70 /* module parameters */
71struct il_mod_params il3945_mod_params = {
72 .sw_crypto = 1,
73 .restart_fw = 1,
74 .disable_hw_scan = 1,
75 /* the rest are 0 by default */
76};
77
78/**
79 * il3945_get_antenna_flags - Get antenna flags for RXON command
80 * @il: eeprom and antenna fields are used to determine antenna flags
81 *
82 * il->eeprom39 is used to determine if antenna AUX/MAIN are reversed
83 * il3945_mod_params.antenna specifies the antenna diversity mode:
84 *
85 * IL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
86 * IL_ANTENNA_MAIN - Force MAIN antenna
87 * IL_ANTENNA_AUX - Force AUX antenna
88 */
89__le32
90il3945_get_antenna_flags(const struct il_priv *il)
91{
92 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
93
94 switch (il3945_mod_params.antenna) {
95 case IL_ANTENNA_DIVERSITY:
96 return 0;
97
98 case IL_ANTENNA_MAIN:
99 if (eeprom->antenna_switch_type)
100 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
101 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
102
103 case IL_ANTENNA_AUX:
104 if (eeprom->antenna_switch_type)
105 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
106 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
107 }
108
109 /* bad antenna selector value */
110 IL_ERR("Bad antenna selector value (0x%x)\n",
111 il3945_mod_params.antenna);
112
113 return 0; /* "diversity" is default if error */
114}
115
116static int
117il3945_set_ccmp_dynamic_key_info(struct il_priv *il,
118 struct ieee80211_key_conf *keyconf, u8 sta_id)
119{
120 unsigned long flags;
121 __le16 key_flags = 0;
122 int ret;
123
124 key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
125 key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
126
127 if (sta_id == il->hw_params.bcast_id)
128 key_flags |= STA_KEY_MULTICAST_MSK;
129
130 keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
131 keyconf->hw_key_idx = keyconf->keyidx;
132 key_flags &= ~STA_KEY_FLG_INVALID;
133
134 spin_lock_irqsave(&il->sta_lock, flags);
135 il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
136 il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
137 memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);
138
139 memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen);
140
141 if ((il->stations[sta_id].sta.key.
142 key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
143 il->stations[sta_id].sta.key.key_offset =
144 il_get_free_ucode_key_idx(il);
145 /* else, we are overriding an existing key => no need to allocated room
146 * in uCode. */
147
148 WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
149 "no space for a new key");
150
151 il->stations[sta_id].sta.key.key_flags = key_flags;
152 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
153 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
154
155 D_INFO("hwcrypto: modify ucode station key info\n");
156
157 ret = il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);
158
159 spin_unlock_irqrestore(&il->sta_lock, flags);
160
161 return ret;
162}
163
164static int
165il3945_set_tkip_dynamic_key_info(struct il_priv *il,
166 struct ieee80211_key_conf *keyconf, u8 sta_id)
167{
168 return -EOPNOTSUPP;
169}
170
171static int
172il3945_set_wep_dynamic_key_info(struct il_priv *il,
173 struct ieee80211_key_conf *keyconf, u8 sta_id)
174{
175 return -EOPNOTSUPP;
176}
177
178static int
179il3945_clear_sta_key_info(struct il_priv *il, u8 sta_id)
180{
181 unsigned long flags;
182 struct il_addsta_cmd sta_cmd;
183
184 spin_lock_irqsave(&il->sta_lock, flags);
185 memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key));
186 memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo));
187 il->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
188 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
189 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
190 memcpy(&sta_cmd, &il->stations[sta_id].sta,
191 sizeof(struct il_addsta_cmd));
192 spin_unlock_irqrestore(&il->sta_lock, flags);
193
194 D_INFO("hwcrypto: clear ucode station key info\n");
195 return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
196}
197
198static int
199il3945_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
200 u8 sta_id)
201{
202 int ret = 0;
203
204 keyconf->hw_key_idx = HW_KEY_DYNAMIC;
205
206 switch (keyconf->cipher) {
207 case WLAN_CIPHER_SUITE_CCMP:
208 ret = il3945_set_ccmp_dynamic_key_info(il, keyconf, sta_id);
209 break;
210 case WLAN_CIPHER_SUITE_TKIP:
211 ret = il3945_set_tkip_dynamic_key_info(il, keyconf, sta_id);
212 break;
213 case WLAN_CIPHER_SUITE_WEP40:
214 case WLAN_CIPHER_SUITE_WEP104:
215 ret = il3945_set_wep_dynamic_key_info(il, keyconf, sta_id);
216 break;
217 default:
218 IL_ERR("Unknown alg: %s alg=%x\n", __func__, keyconf->cipher);
219 ret = -EINVAL;
220 }
221
222 D_WEP("Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
223 keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret);
224
225 return ret;
226}
227
228static int
229il3945_remove_static_key(struct il_priv *il)
230{
231 return -EOPNOTSUPP;
232}
233
234static int
235il3945_set_static_key(struct il_priv *il, struct ieee80211_key_conf *key)
236{
237 if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
238 key->cipher == WLAN_CIPHER_SUITE_WEP104)
239 return -EOPNOTSUPP;
240
241 IL_ERR("Static key invalid: cipher %x\n", key->cipher);
242 return -EINVAL;
243}
244
245static void
246il3945_clear_free_frames(struct il_priv *il)
247{
248 struct list_head *element;
249
250 D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count);
251
252 while (!list_empty(&il->free_frames)) {
253 element = il->free_frames.next;
254 list_del(element);
255 kfree(list_entry(element, struct il3945_frame, list));
256 il->frames_count--;
257 }
258
259 if (il->frames_count) {
260 IL_WARN("%d frames still in use. Did we lose one?\n",
261 il->frames_count);
262 il->frames_count = 0;
263 }
264}
265
266static struct il3945_frame *
267il3945_get_free_frame(struct il_priv *il)
268{
269 struct il3945_frame *frame;
270 struct list_head *element;
271 if (list_empty(&il->free_frames)) {
272 frame = kzalloc(sizeof(*frame), GFP_KERNEL);
273 if (!frame) {
274 IL_ERR("Could not allocate frame!\n");
275 return NULL;
276 }
277
278 il->frames_count++;
279 return frame;
280 }
281
282 element = il->free_frames.next;
283 list_del(element);
284 return list_entry(element, struct il3945_frame, list);
285}
286
287static void
288il3945_free_frame(struct il_priv *il, struct il3945_frame *frame)
289{
290 memset(frame, 0, sizeof(*frame));
291 list_add(&frame->list, &il->free_frames);
292}
293
294unsigned int
295il3945_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr,
296 int left)
297{
298
299 if (!il_is_associated(il) || !il->beacon_skb)
300 return 0;
301
302 if (il->beacon_skb->len > left)
303 return 0;
304
305 memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);
306
307 return il->beacon_skb->len;
308}
309
310static int
311il3945_send_beacon_cmd(struct il_priv *il)
312{
313 struct il3945_frame *frame;
314 unsigned int frame_size;
315 int rc;
316 u8 rate;
317
318 frame = il3945_get_free_frame(il);
319
320 if (!frame) {
321 IL_ERR("Could not obtain free frame buffer for beacon "
322 "command.\n");
323 return -ENOMEM;
324 }
325
326 rate = il_get_lowest_plcp(il);
327
328 frame_size = il3945_hw_get_beacon_cmd(il, frame, rate);
329
330 rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]);
331
332 il3945_free_frame(il, frame);
333
334 return rc;
335}
336
337static void
338il3945_unset_hw_params(struct il_priv *il)
339{
340 if (il->_3945.shared_virt)
341 dma_free_coherent(&il->pci_dev->dev,
342 sizeof(struct il3945_shared),
343 il->_3945.shared_virt, il->_3945.shared_phys);
344}
345
346static void
347il3945_build_tx_cmd_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info,
348 struct il_device_cmd *cmd,
349 struct sk_buff *skb_frag, int sta_id)
350{
351 struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
352 struct il_hw_key *keyinfo = &il->stations[sta_id].keyinfo;
353
354 tx_cmd->sec_ctl = 0;
355
356 switch (keyinfo->cipher) {
357 case WLAN_CIPHER_SUITE_CCMP:
358 tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
359 memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
360 D_TX("tx_cmd with AES hwcrypto\n");
361 break;
362
363 case WLAN_CIPHER_SUITE_TKIP:
364 break;
365
366 case WLAN_CIPHER_SUITE_WEP104:
367 tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
368 fallthrough;
369 case WLAN_CIPHER_SUITE_WEP40:
370 tx_cmd->sec_ctl |=
371 TX_CMD_SEC_WEP | (info->control.hw_key->
372 hw_key_idx & TX_CMD_SEC_MSK) <<
373 TX_CMD_SEC_SHIFT;
374
375 memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
376
377 D_TX("Configuring packet for WEP encryption " "with key %d\n",
378 info->control.hw_key->hw_key_idx);
379 break;
380
381 default:
382 IL_ERR("Unknown encode cipher %x\n", keyinfo->cipher);
383 break;
384 }
385}
386
387/*
388 * handle build C_TX command notification.
389 */
390static void
391il3945_build_tx_cmd_basic(struct il_priv *il, struct il_device_cmd *cmd,
392 struct ieee80211_tx_info *info,
393 struct ieee80211_hdr *hdr, u8 std_id)
394{
395 struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
396 __le32 tx_flags = tx_cmd->tx_flags;
397 __le16 fc = hdr->frame_control;
398
399 tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
400 if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
401 tx_flags |= TX_CMD_FLG_ACK_MSK;
402 if (ieee80211_is_mgmt(fc))
403 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
404 if (ieee80211_is_probe_resp(fc) &&
405 !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
406 tx_flags |= TX_CMD_FLG_TSF_MSK;
407 } else {
408 tx_flags &= (~TX_CMD_FLG_ACK_MSK);
409 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
410 }
411
412 tx_cmd->sta_id = std_id;
413 if (ieee80211_has_morefrags(fc))
414 tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
415
416 if (ieee80211_is_data_qos(fc)) {
417 u8 *qc = ieee80211_get_qos_ctl(hdr);
418 tx_cmd->tid_tspec = qc[0] & 0xf;
419 tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
420 } else {
421 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
422 }
423
424 il_tx_cmd_protection(il, info, fc, &tx_flags);
425
426 tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
427 if (ieee80211_is_mgmt(fc)) {
428 if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
429 tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
430 else
431 tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
432 } else {
433 tx_cmd->timeout.pm_frame_timeout = 0;
434 }
435
436 tx_cmd->driver_txop = 0;
437 tx_cmd->tx_flags = tx_flags;
438 tx_cmd->next_frame_len = 0;
439}
440
441/*
442 * start C_TX command process
443 */
444static int
445il3945_tx_skb(struct il_priv *il,
446 struct ieee80211_sta *sta,
447 struct sk_buff *skb)
448{
449 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
450 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
451 struct il3945_tx_cmd *tx_cmd;
452 struct il_tx_queue *txq = NULL;
453 struct il_queue *q = NULL;
454 struct il_device_cmd *out_cmd;
455 struct il_cmd_meta *out_meta;
456 dma_addr_t phys_addr;
457 dma_addr_t txcmd_phys;
458 int txq_id = skb_get_queue_mapping(skb);
459 u16 len, idx, hdr_len;
460 u16 firstlen, secondlen;
461 u8 sta_id;
462 u8 tid = 0;
463 __le16 fc;
464 u8 wait_write_ptr = 0;
465 unsigned long flags;
466
467 spin_lock_irqsave(&il->lock, flags);
468 if (il_is_rfkill(il)) {
469 D_DROP("Dropping - RF KILL\n");
470 goto drop_unlock;
471 }
472
473 if ((ieee80211_get_tx_rate(il->hw, info)->hw_value & 0xFF) ==
474 IL_INVALID_RATE) {
475 IL_ERR("ERROR: No TX rate available.\n");
476 goto drop_unlock;
477 }
478
479 fc = hdr->frame_control;
480
481#ifdef CONFIG_IWLEGACY_DEBUG
482 if (ieee80211_is_auth(fc))
483 D_TX("Sending AUTH frame\n");
484 else if (ieee80211_is_assoc_req(fc))
485 D_TX("Sending ASSOC frame\n");
486 else if (ieee80211_is_reassoc_req(fc))
487 D_TX("Sending REASSOC frame\n");
488#endif
489
490 spin_unlock_irqrestore(&il->lock, flags);
491
492 hdr_len = ieee80211_hdrlen(fc);
493
494 /* Find idx into station table for destination station */
495 sta_id = il_sta_id_or_broadcast(il, sta);
496 if (sta_id == IL_INVALID_STATION) {
497 D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1);
498 goto drop;
499 }
500
501 D_RATE("station Id %d\n", sta_id);
502
503 if (ieee80211_is_data_qos(fc)) {
504 u8 *qc = ieee80211_get_qos_ctl(hdr);
505 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
506 if (unlikely(tid >= MAX_TID_COUNT))
507 goto drop;
508 }
509
510 /* Descriptor for chosen Tx queue */
511 txq = &il->txq[txq_id];
512 q = &txq->q;
513
514 if ((il_queue_space(q) < q->high_mark))
515 goto drop;
516
517 spin_lock_irqsave(&il->lock, flags);
518
519 idx = il_get_cmd_idx(q, q->write_ptr, 0);
520
521 txq->skbs[q->write_ptr] = skb;
522
523 /* Init first empty entry in queue's array of Tx/cmd buffers */
524 out_cmd = txq->cmd[idx];
525 out_meta = &txq->meta[idx];
526 tx_cmd = (struct il3945_tx_cmd *)out_cmd->cmd.payload;
527 memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
528 memset(tx_cmd, 0, sizeof(*tx_cmd));
529
530 /*
531 * Set up the Tx-command (not MAC!) header.
532 * Store the chosen Tx queue and TFD idx within the sequence field;
533 * after Tx, uCode's Tx response will return this value so driver can
534 * locate the frame within the tx queue and do post-tx processing.
535 */
536 out_cmd->hdr.cmd = C_TX;
537 out_cmd->hdr.sequence =
538 cpu_to_le16((u16)
539 (QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr)));
540
541 /* Copy MAC header from skb into command buffer */
542 memcpy(tx_cmd->hdr, hdr, hdr_len);
543
544 if (info->control.hw_key)
545 il3945_build_tx_cmd_hwcrypto(il, info, out_cmd, skb, sta_id);
546
547 /* TODO need this for burst mode later on */
548 il3945_build_tx_cmd_basic(il, out_cmd, info, hdr, sta_id);
549
550 il3945_hw_build_tx_cmd_rate(il, out_cmd, info, hdr, sta_id);
551
552 /* Total # bytes to be transmitted */
553 tx_cmd->len = cpu_to_le16((u16) skb->len);
554
555 tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
556 tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
557
558 /*
559 * Use the first empty entry in this queue's command buffer array
560 * to contain the Tx command and MAC header concatenated together
561 * (payload data will be in another buffer).
562 * Size of this varies, due to varying MAC header length.
563 * If end is not dword aligned, we'll have 2 extra bytes at the end
564 * of the MAC header (device reads on dword boundaries).
565 * We'll tell device about this padding later.
566 */
567 len =
568 sizeof(struct il3945_tx_cmd) + sizeof(struct il_cmd_header) +
569 hdr_len;
570 firstlen = (len + 3) & ~3;
571
572 /* Physical address of this Tx command's header (not MAC header!),
573 * within command buffer array. */
574 txcmd_phys = dma_map_single(&il->pci_dev->dev, &out_cmd->hdr, firstlen,
575 DMA_TO_DEVICE);
576 if (unlikely(dma_mapping_error(&il->pci_dev->dev, txcmd_phys)))
577 goto drop_unlock;
578
579 /* Set up TFD's 2nd entry to point directly to remainder of skb,
580 * if any (802.11 null frames have no payload). */
581 secondlen = skb->len - hdr_len;
582 if (secondlen > 0) {
583 phys_addr = dma_map_single(&il->pci_dev->dev, skb->data + hdr_len,
584 secondlen, DMA_TO_DEVICE);
585 if (unlikely(dma_mapping_error(&il->pci_dev->dev, phys_addr)))
586 goto drop_unlock;
587 }
588
589 /* Add buffer containing Tx command and MAC(!) header to TFD's
590 * first entry */
591 il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0);
592 dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
593 dma_unmap_len_set(out_meta, len, firstlen);
594 if (secondlen > 0)
595 il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 0,
596 U32_PAD(secondlen));
597
598 if (!ieee80211_has_morefrags(hdr->frame_control)) {
599 txq->need_update = 1;
600 } else {
601 wait_write_ptr = 1;
602 txq->need_update = 0;
603 }
604
605 il_update_stats(il, true, fc, skb->len);
606
607 D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence));
608 D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
609 il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd));
610 il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr,
611 ieee80211_hdrlen(fc));
612
613 /* Tell device the write idx *just past* this latest filled TFD */
614 q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
615 il_txq_update_write_ptr(il, txq);
616 spin_unlock_irqrestore(&il->lock, flags);
617
618 if (il_queue_space(q) < q->high_mark && il->mac80211_registered) {
619 if (wait_write_ptr) {
620 spin_lock_irqsave(&il->lock, flags);
621 txq->need_update = 1;
622 il_txq_update_write_ptr(il, txq);
623 spin_unlock_irqrestore(&il->lock, flags);
624 }
625
626 il_stop_queue(il, txq);
627 }
628
629 return 0;
630
631drop_unlock:
632 spin_unlock_irqrestore(&il->lock, flags);
633drop:
634 return -1;
635}
636
637static int
638il3945_get_measurement(struct il_priv *il,
639 struct ieee80211_measurement_params *params, u8 type)
640{
641 struct il_spectrum_cmd spectrum;
642 struct il_rx_pkt *pkt;
643 struct il_host_cmd cmd = {
644 .id = C_SPECTRUM_MEASUREMENT,
645 .data = (void *)&spectrum,
646 .flags = CMD_WANT_SKB,
647 };
648 u32 add_time = le64_to_cpu(params->start_time);
649 int rc;
650 int spectrum_resp_status;
651 int duration = le16_to_cpu(params->duration);
652
653 if (il_is_associated(il))
654 add_time =
655 il_usecs_to_beacons(il,
656 le64_to_cpu(params->start_time) -
657 il->_3945.last_tsf,
658 le16_to_cpu(il->timing.beacon_interval));
659
660 memset(&spectrum, 0, sizeof(spectrum));
661
662 spectrum.channel_count = cpu_to_le16(1);
663 spectrum.flags =
664 RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
665 spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
666 cmd.len = sizeof(spectrum);
667 spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
668
669 if (il_is_associated(il))
670 spectrum.start_time =
671 il_add_beacon_time(il, il->_3945.last_beacon_time, add_time,
672 le16_to_cpu(il->timing.beacon_interval));
673 else
674 spectrum.start_time = 0;
675
676 spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
677 spectrum.channels[0].channel = params->channel;
678 spectrum.channels[0].type = type;
679 if (il->active.flags & RXON_FLG_BAND_24G_MSK)
680 spectrum.flags |=
681 RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK |
682 RXON_FLG_TGG_PROTECT_MSK;
683
684 rc = il_send_cmd_sync(il, &cmd);
685 if (rc)
686 return rc;
687
688 pkt = (struct il_rx_pkt *)cmd.reply_page;
689 if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
690 IL_ERR("Bad return from N_RX_ON_ASSOC command\n");
691 rc = -EIO;
692 }
693
694 spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
695 switch (spectrum_resp_status) {
696 case 0: /* Command will be handled */
697 if (pkt->u.spectrum.id != 0xff) {
698 D_INFO("Replaced existing measurement: %d\n",
699 pkt->u.spectrum.id);
700 il->measurement_status &= ~MEASUREMENT_READY;
701 }
702 il->measurement_status |= MEASUREMENT_ACTIVE;
703 rc = 0;
704 break;
705
706 case 1: /* Command will not be handled */
707 rc = -EAGAIN;
708 break;
709 }
710
711 il_free_pages(il, cmd.reply_page);
712
713 return rc;
714}
715
716static void
717il3945_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb)
718{
719 struct il_rx_pkt *pkt = rxb_addr(rxb);
720 struct il_alive_resp *palive;
721 struct delayed_work *pwork;
722
723 palive = &pkt->u.alive_frame;
724
725 D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n",
726 palive->is_valid, palive->ver_type, palive->ver_subtype);
727
728 if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
729 D_INFO("Initialization Alive received.\n");
730 memcpy(&il->card_alive_init, &pkt->u.alive_frame,
731 sizeof(struct il_alive_resp));
732 pwork = &il->init_alive_start;
733 } else {
734 D_INFO("Runtime Alive received.\n");
735 memcpy(&il->card_alive, &pkt->u.alive_frame,
736 sizeof(struct il_alive_resp));
737 pwork = &il->alive_start;
738 il3945_disable_events(il);
739 }
740
741 /* We delay the ALIVE response by 5ms to
742 * give the HW RF Kill time to activate... */
743 if (palive->is_valid == UCODE_VALID_OK)
744 queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5));
745 else
746 IL_WARN("uCode did not respond OK.\n");
747}
748
749static void
750il3945_hdl_add_sta(struct il_priv *il, struct il_rx_buf *rxb)
751{
752 struct il_rx_pkt *pkt = rxb_addr(rxb);
753
754 D_RX("Received C_ADD_STA: 0x%02X\n", pkt->u.status);
755}
756
757static void
758il3945_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb)
759{
760 struct il_rx_pkt *pkt = rxb_addr(rxb);
761 struct il3945_beacon_notif *beacon = &(pkt->u.beacon_status);
762#ifdef CONFIG_IWLEGACY_DEBUG
763 u8 rate = beacon->beacon_notify_hdr.rate;
764
765 D_RX("beacon status %x retries %d iss %d " "tsf %d %d rate %d\n",
766 le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
767 beacon->beacon_notify_hdr.failure_frame,
768 le32_to_cpu(beacon->ibss_mgr_status),
769 le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate);
770#endif
771
772 il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
773
774}
775
776/* Handle notification from uCode that card's power state is changing
777 * due to software, hardware, or critical temperature RFKILL */
778static void
779il3945_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb)
780{
781 struct il_rx_pkt *pkt = rxb_addr(rxb);
782 u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
783 unsigned long status = il->status;
784
785 IL_WARN("Card state received: HW:%s SW:%s\n",
786 (flags & HW_CARD_DISABLED) ? "Kill" : "On",
787 (flags & SW_CARD_DISABLED) ? "Kill" : "On");
788
789 _il_wr(il, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
790
791 if (flags & HW_CARD_DISABLED)
792 set_bit(S_RFKILL, &il->status);
793 else
794 clear_bit(S_RFKILL, &il->status);
795
796 il_scan_cancel(il);
797
798 if ((test_bit(S_RFKILL, &status) !=
799 test_bit(S_RFKILL, &il->status)))
800 wiphy_rfkill_set_hw_state(il->hw->wiphy,
801 test_bit(S_RFKILL, &il->status));
802 else
803 wake_up(&il->wait_command_queue);
804}
805
806/*
807 * il3945_setup_handlers - Initialize Rx handler callbacks
808 *
809 * Setup the RX handlers for each of the reply types sent from the uCode
810 * to the host.
811 *
812 * This function chains into the hardware specific files for them to setup
813 * any hardware specific handlers as well.
814 */
815static void
816il3945_setup_handlers(struct il_priv *il)
817{
818 il->handlers[N_ALIVE] = il3945_hdl_alive;
819 il->handlers[C_ADD_STA] = il3945_hdl_add_sta;
820 il->handlers[N_ERROR] = il_hdl_error;
821 il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa;
822 il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement;
823 il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep;
824 il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats;
825 il->handlers[N_BEACON] = il3945_hdl_beacon;
826
827 /*
828 * The same handler is used for both the REPLY to a discrete
829 * stats request from the host as well as for the periodic
830 * stats notifications (after received beacons) from the uCode.
831 */
832 il->handlers[C_STATS] = il3945_hdl_c_stats;
833 il->handlers[N_STATS] = il3945_hdl_stats;
834
835 il_setup_rx_scan_handlers(il);
836 il->handlers[N_CARD_STATE] = il3945_hdl_card_state;
837
838 /* Set up hardware specific Rx handlers */
839 il3945_hw_handler_setup(il);
840}
841
842/************************** RX-FUNCTIONS ****************************/
843/*
844 * Rx theory of operation
845 *
846 * The host allocates 32 DMA target addresses and passes the host address
847 * to the firmware at register IL_RFDS_TBL_LOWER + N * RFD_SIZE where N is
848 * 0 to 31
849 *
850 * Rx Queue Indexes
851 * The host/firmware share two idx registers for managing the Rx buffers.
852 *
853 * The READ idx maps to the first position that the firmware may be writing
854 * to -- the driver can read up to (but not including) this position and get
855 * good data.
856 * The READ idx is managed by the firmware once the card is enabled.
857 *
858 * The WRITE idx maps to the last position the driver has read from -- the
859 * position preceding WRITE is the last slot the firmware can place a packet.
860 *
861 * The queue is empty (no good data) if WRITE = READ - 1, and is full if
862 * WRITE = READ.
863 *
864 * During initialization, the host sets up the READ queue position to the first
865 * IDX position, and WRITE to the last (READ - 1 wrapped)
866 *
867 * When the firmware places a packet in a buffer, it will advance the READ idx
868 * and fire the RX interrupt. The driver can then query the READ idx and
869 * process as many packets as possible, moving the WRITE idx forward as it
870 * resets the Rx queue buffers with new memory.
871 *
872 * The management in the driver is as follows:
873 * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
874 * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
875 * to replenish the iwl->rxq->rx_free.
876 * + In il3945_rx_replenish (scheduled) if 'processed' != 'read' then the
877 * iwl->rxq is replenished and the READ IDX is updated (updating the
878 * 'processed' and 'read' driver idxes as well)
879 * + A received packet is processed and handed to the kernel network stack,
880 * detached from the iwl->rxq. The driver 'processed' idx is updated.
881 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
882 * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
883 * IDX is not incremented and iwl->status(RX_STALLED) is set. If there
884 * were enough free buffers and RX_STALLED is set it is cleared.
885 *
886 *
887 * Driver sequence:
888 *
889 * il3945_rx_replenish() Replenishes rx_free list from rx_used, and calls
890 * il3945_rx_queue_restock
891 * il3945_rx_queue_restock() Moves available buffers from rx_free into Rx
892 * queue, updates firmware pointers, and updates
893 * the WRITE idx. If insufficient rx_free buffers
894 * are available, schedules il3945_rx_replenish
895 *
896 * -- enable interrupts --
897 * ISR - il3945_rx() Detach il_rx_bufs from pool up to the
898 * READ IDX, detaching the SKB from the pool.
899 * Moves the packet buffer from queue to rx_used.
900 * Calls il3945_rx_queue_restock to refill any empty
901 * slots.
902 * ...
903 *
904 */
905
906/*
907 * il3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
908 */
909static inline __le32
910il3945_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr)
911{
912 return cpu_to_le32((u32) dma_addr);
913}
914
915/*
916 * il3945_rx_queue_restock - refill RX queue from pre-allocated pool
917 *
918 * If there are slots in the RX queue that need to be restocked,
919 * and we have free pre-allocated buffers, fill the ranks as much
920 * as we can, pulling from rx_free.
921 *
922 * This moves the 'write' idx forward to catch up with 'processed', and
923 * also updates the memory address in the firmware to reference the new
924 * target buffer.
925 */
926static void
927il3945_rx_queue_restock(struct il_priv *il)
928{
929 struct il_rx_queue *rxq = &il->rxq;
930 struct list_head *element;
931 struct il_rx_buf *rxb;
932 unsigned long flags;
933
934 spin_lock_irqsave(&rxq->lock, flags);
935 while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
936 /* Get next free Rx buffer, remove from free list */
937 element = rxq->rx_free.next;
938 rxb = list_entry(element, struct il_rx_buf, list);
939 list_del(element);
940
941 /* Point to Rx buffer via next RBD in circular buffer */
942 rxq->bd[rxq->write] =
943 il3945_dma_addr2rbd_ptr(il, rxb->page_dma);
944 rxq->queue[rxq->write] = rxb;
945 rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
946 rxq->free_count--;
947 }
948 spin_unlock_irqrestore(&rxq->lock, flags);
949 /* If the pre-allocated buffer pool is dropping low, schedule to
950 * refill it */
951 if (rxq->free_count <= RX_LOW_WATERMARK)
952 queue_work(il->workqueue, &il->rx_replenish);
953
954 /* If we've added more space for the firmware to place data, tell it.
955 * Increment device's write pointer in multiples of 8. */
956 if (rxq->write_actual != (rxq->write & ~0x7) ||
957 abs(rxq->write - rxq->read) > 7) {
958 spin_lock_irqsave(&rxq->lock, flags);
959 rxq->need_update = 1;
960 spin_unlock_irqrestore(&rxq->lock, flags);
961 il_rx_queue_update_write_ptr(il, rxq);
962 }
963}
964
965/*
966 * il3945_rx_replenish - Move all used packet from rx_used to rx_free
967 *
968 * When moving to rx_free an SKB is allocated for the slot.
969 *
970 * Also restock the Rx queue via il3945_rx_queue_restock.
971 * This is called as a scheduled work item (except for during initialization)
972 */
973static void
974il3945_rx_allocate(struct il_priv *il, gfp_t priority)
975{
976 struct il_rx_queue *rxq = &il->rxq;
977 struct list_head *element;
978 struct il_rx_buf *rxb;
979 struct page *page;
980 dma_addr_t page_dma;
981 unsigned long flags;
982 gfp_t gfp_mask = priority;
983
984 while (1) {
985 spin_lock_irqsave(&rxq->lock, flags);
986 if (list_empty(&rxq->rx_used)) {
987 spin_unlock_irqrestore(&rxq->lock, flags);
988 return;
989 }
990 spin_unlock_irqrestore(&rxq->lock, flags);
991
992 if (rxq->free_count > RX_LOW_WATERMARK)
993 gfp_mask |= __GFP_NOWARN;
994
995 if (il->hw_params.rx_page_order > 0)
996 gfp_mask |= __GFP_COMP;
997
998 /* Alloc a new receive buffer */
999 page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
1000 if (!page) {
1001 if (net_ratelimit())
1002 D_INFO("Failed to allocate SKB buffer.\n");
1003 if (rxq->free_count <= RX_LOW_WATERMARK &&
1004 net_ratelimit())
1005 IL_ERR("Failed to allocate SKB buffer with %0x."
1006 "Only %u free buffers remaining.\n",
1007 priority, rxq->free_count);
1008 /* We don't reschedule replenish work here -- we will
1009 * call the restock method and if it still needs
1010 * more buffers it will schedule replenish */
1011 break;
1012 }
1013
1014 /* Get physical address of RB/SKB */
1015 page_dma =
1016 dma_map_page(&il->pci_dev->dev, page, 0,
1017 PAGE_SIZE << il->hw_params.rx_page_order,
1018 DMA_FROM_DEVICE);
1019
1020 if (unlikely(dma_mapping_error(&il->pci_dev->dev, page_dma))) {
1021 __free_pages(page, il->hw_params.rx_page_order);
1022 break;
1023 }
1024
1025 spin_lock_irqsave(&rxq->lock, flags);
1026
1027 if (list_empty(&rxq->rx_used)) {
1028 spin_unlock_irqrestore(&rxq->lock, flags);
1029 dma_unmap_page(&il->pci_dev->dev, page_dma,
1030 PAGE_SIZE << il->hw_params.rx_page_order,
1031 DMA_FROM_DEVICE);
1032 __free_pages(page, il->hw_params.rx_page_order);
1033 return;
1034 }
1035
1036 element = rxq->rx_used.next;
1037 rxb = list_entry(element, struct il_rx_buf, list);
1038 list_del(element);
1039
1040 rxb->page = page;
1041 rxb->page_dma = page_dma;
1042 list_add_tail(&rxb->list, &rxq->rx_free);
1043 rxq->free_count++;
1044 il->alloc_rxb_page++;
1045
1046 spin_unlock_irqrestore(&rxq->lock, flags);
1047 }
1048}
1049
1050void
1051il3945_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
1052{
1053 unsigned long flags;
1054 int i;
1055 spin_lock_irqsave(&rxq->lock, flags);
1056 INIT_LIST_HEAD(&rxq->rx_free);
1057 INIT_LIST_HEAD(&rxq->rx_used);
1058 /* Fill the rx_used queue with _all_ of the Rx buffers */
1059 for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
1060 /* In the reset function, these buffers may have been allocated
1061 * to an SKB, so we need to unmap and free potential storage */
1062 if (rxq->pool[i].page != NULL) {
1063 dma_unmap_page(&il->pci_dev->dev,
1064 rxq->pool[i].page_dma,
1065 PAGE_SIZE << il->hw_params.rx_page_order,
1066 DMA_FROM_DEVICE);
1067 __il_free_pages(il, rxq->pool[i].page);
1068 rxq->pool[i].page = NULL;
1069 }
1070 list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
1071 }
1072
1073 /* Set us so that we have processed and used all buffers, but have
1074 * not restocked the Rx queue with fresh buffers */
1075 rxq->read = rxq->write = 0;
1076 rxq->write_actual = 0;
1077 rxq->free_count = 0;
1078 spin_unlock_irqrestore(&rxq->lock, flags);
1079}
1080
1081void
1082il3945_rx_replenish(void *data)
1083{
1084 struct il_priv *il = data;
1085 unsigned long flags;
1086
1087 il3945_rx_allocate(il, GFP_KERNEL);
1088
1089 spin_lock_irqsave(&il->lock, flags);
1090 il3945_rx_queue_restock(il);
1091 spin_unlock_irqrestore(&il->lock, flags);
1092}
1093
1094static void
1095il3945_rx_replenish_now(struct il_priv *il)
1096{
1097 il3945_rx_allocate(il, GFP_ATOMIC);
1098
1099 il3945_rx_queue_restock(il);
1100}
1101
1102/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
1103 * If an SKB has been detached, the POOL needs to have its SKB set to NULL
1104 * This free routine walks the list of POOL entries and if SKB is set to
1105 * non NULL it is unmapped and freed
1106 */
1107static void
1108il3945_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
1109{
1110 int i;
1111 for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
1112 if (rxq->pool[i].page != NULL) {
1113 dma_unmap_page(&il->pci_dev->dev,
1114 rxq->pool[i].page_dma,
1115 PAGE_SIZE << il->hw_params.rx_page_order,
1116 DMA_FROM_DEVICE);
1117 __il_free_pages(il, rxq->pool[i].page);
1118 rxq->pool[i].page = NULL;
1119 }
1120 }
1121
1122 dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
1123 rxq->bd_dma);
1124 dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
1125 rxq->rb_stts, rxq->rb_stts_dma);
1126 rxq->bd = NULL;
1127 rxq->rb_stts = NULL;
1128}
1129
1130/* Convert linear signal-to-noise ratio into dB */
1131static u8 ratio2dB[100] = {
1132/* 0 1 2 3 4 5 6 7 8 9 */
1133 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
1134 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
1135 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
1136 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
1137 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
1138 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
1139 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
1140 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
1141 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
1142 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
1143};
1144
1145/* Calculates a relative dB value from a ratio of linear
1146 * (i.e. not dB) signal levels.
1147 * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
1148int
1149il3945_calc_db_from_ratio(int sig_ratio)
1150{
1151 /* 1000:1 or higher just report as 60 dB */
1152 if (sig_ratio >= 1000)
1153 return 60;
1154
1155 /* 100:1 or higher, divide by 10 and use table,
1156 * add 20 dB to make up for divide by 10 */
1157 if (sig_ratio >= 100)
1158 return 20 + (int)ratio2dB[sig_ratio / 10];
1159
1160 /* We shouldn't see this */
1161 if (sig_ratio < 1)
1162 return 0;
1163
1164 /* Use table for ratios 1:1 - 99:1 */
1165 return (int)ratio2dB[sig_ratio];
1166}
1167
1168/*
1169 * il3945_rx_handle - Main entry function for receiving responses from uCode
1170 *
1171 * Uses the il->handlers callback function array to invoke
1172 * the appropriate handlers, including command responses,
1173 * frame-received notifications, and other notifications.
1174 */
1175static void
1176il3945_rx_handle(struct il_priv *il)
1177{
1178 struct il_rx_buf *rxb;
1179 struct il_rx_pkt *pkt;
1180 struct il_rx_queue *rxq = &il->rxq;
1181 u32 r, i;
1182 int reclaim;
1183 unsigned long flags;
1184 u8 fill_rx = 0;
1185 u32 count = 8;
1186 int total_empty = 0;
1187
1188 /* uCode's read idx (stored in shared DRAM) indicates the last Rx
1189 * buffer that the driver may process (last buffer filled by ucode). */
1190 r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
1191 i = rxq->read;
1192
1193 /* calculate total frames need to be restock after handling RX */
1194 total_empty = r - rxq->write_actual;
1195 if (total_empty < 0)
1196 total_empty += RX_QUEUE_SIZE;
1197
1198 if (total_empty > (RX_QUEUE_SIZE / 2))
1199 fill_rx = 1;
1200 /* Rx interrupt, but nothing sent from uCode */
1201 if (i == r)
1202 D_RX("r = %d, i = %d\n", r, i);
1203
1204 while (i != r) {
1205 rxb = rxq->queue[i];
1206
1207 /* If an RXB doesn't have a Rx queue slot associated with it,
1208 * then a bug has been introduced in the queue refilling
1209 * routines -- catch it here */
1210 BUG_ON(rxb == NULL);
1211
1212 rxq->queue[i] = NULL;
1213
1214 dma_unmap_page(&il->pci_dev->dev, rxb->page_dma,
1215 PAGE_SIZE << il->hw_params.rx_page_order,
1216 DMA_FROM_DEVICE);
1217 pkt = rxb_addr(rxb);
1218 reclaim = il_need_reclaim(il, pkt);
1219
1220 /* Based on type of command response or notification,
1221 * handle those that need handling via function in
1222 * handlers table. See il3945_setup_handlers() */
1223 if (il->handlers[pkt->hdr.cmd]) {
1224 D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i,
1225 il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
1226 il->isr_stats.handlers[pkt->hdr.cmd]++;
1227 il->handlers[pkt->hdr.cmd] (il, rxb);
1228 } else {
1229 /* No handling needed */
1230 D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r,
1231 i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
1232 }
1233
1234 /*
1235 * XXX: After here, we should always check rxb->page
1236 * against NULL before touching it or its virtual
1237 * memory (pkt). Because some handler might have
1238 * already taken or freed the pages.
1239 */
1240
1241 if (reclaim) {
1242 /* Invoke any callbacks, transfer the buffer to caller,
1243 * and fire off the (possibly) blocking il_send_cmd()
1244 * as we reclaim the driver command queue */
1245 if (rxb->page)
1246 il_tx_cmd_complete(il, rxb);
1247 else
1248 IL_WARN("Claim null rxb?\n");
1249 }
1250
1251 /* Reuse the page if possible. For notification packets and
1252 * SKBs that fail to Rx correctly, add them back into the
1253 * rx_free list for reuse later. */
1254 spin_lock_irqsave(&rxq->lock, flags);
1255 if (rxb->page != NULL) {
1256 rxb->page_dma =
1257 dma_map_page(&il->pci_dev->dev, rxb->page, 0,
1258 PAGE_SIZE << il->hw_params.rx_page_order,
1259 DMA_FROM_DEVICE);
1260 if (unlikely(dma_mapping_error(&il->pci_dev->dev,
1261 rxb->page_dma))) {
1262 __il_free_pages(il, rxb->page);
1263 rxb->page = NULL;
1264 list_add_tail(&rxb->list, &rxq->rx_used);
1265 } else {
1266 list_add_tail(&rxb->list, &rxq->rx_free);
1267 rxq->free_count++;
1268 }
1269 } else
1270 list_add_tail(&rxb->list, &rxq->rx_used);
1271
1272 spin_unlock_irqrestore(&rxq->lock, flags);
1273
1274 i = (i + 1) & RX_QUEUE_MASK;
1275 /* If there are a lot of unused frames,
1276 * restock the Rx queue so ucode won't assert. */
1277 if (fill_rx) {
1278 count++;
1279 if (count >= 8) {
1280 rxq->read = i;
1281 il3945_rx_replenish_now(il);
1282 count = 0;
1283 }
1284 }
1285 }
1286
1287 /* Backtrack one entry */
1288 rxq->read = i;
1289 if (fill_rx)
1290 il3945_rx_replenish_now(il);
1291 else
1292 il3945_rx_queue_restock(il);
1293}
1294
1295/* call this function to flush any scheduled tasklet */
1296static inline void
1297il3945_synchronize_irq(struct il_priv *il)
1298{
1299 /* wait to make sure we flush pending tasklet */
1300 synchronize_irq(il->pci_dev->irq);
1301 tasklet_kill(&il->irq_tasklet);
1302}
1303
1304static const char *
1305il3945_desc_lookup(int i)
1306{
1307 switch (i) {
1308 case 1:
1309 return "FAIL";
1310 case 2:
1311 return "BAD_PARAM";
1312 case 3:
1313 return "BAD_CHECKSUM";
1314 case 4:
1315 return "NMI_INTERRUPT";
1316 case 5:
1317 return "SYSASSERT";
1318 case 6:
1319 return "FATAL_ERROR";
1320 }
1321
1322 return "UNKNOWN";
1323}
1324
1325#define ERROR_START_OFFSET (1 * sizeof(u32))
1326#define ERROR_ELEM_SIZE (7 * sizeof(u32))
1327
1328void
1329il3945_dump_nic_error_log(struct il_priv *il)
1330{
1331 u32 i;
1332 u32 desc, time, count, base, data1;
1333 u32 blink1, blink2, ilink1, ilink2;
1334
1335 base = le32_to_cpu(il->card_alive.error_event_table_ptr);
1336
1337 if (!il3945_hw_valid_rtc_data_addr(base)) {
1338 IL_ERR("Not valid error log pointer 0x%08X\n", base);
1339 return;
1340 }
1341
1342 count = il_read_targ_mem(il, base);
1343
1344 if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
1345 IL_ERR("Start IWL Error Log Dump:\n");
1346 IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count);
1347 }
1348
1349 IL_ERR("Desc Time asrtPC blink2 "
1350 "ilink1 nmiPC Line\n");
1351 for (i = ERROR_START_OFFSET;
1352 i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
1353 i += ERROR_ELEM_SIZE) {
1354 desc = il_read_targ_mem(il, base + i);
1355 time = il_read_targ_mem(il, base + i + 1 * sizeof(u32));
1356 blink1 = il_read_targ_mem(il, base + i + 2 * sizeof(u32));
1357 blink2 = il_read_targ_mem(il, base + i + 3 * sizeof(u32));
1358 ilink1 = il_read_targ_mem(il, base + i + 4 * sizeof(u32));
1359 ilink2 = il_read_targ_mem(il, base + i + 5 * sizeof(u32));
1360 data1 = il_read_targ_mem(il, base + i + 6 * sizeof(u32));
1361
1362 IL_ERR("%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
1363 il3945_desc_lookup(desc), desc, time, blink1, blink2,
1364 ilink1, ilink2, data1);
1365 }
1366}
1367
1368static void
1369il3945_irq_tasklet(struct tasklet_struct *t)
1370{
1371 struct il_priv *il = from_tasklet(il, t, irq_tasklet);
1372 u32 inta, handled = 0;
1373 u32 inta_fh;
1374 unsigned long flags;
1375#ifdef CONFIG_IWLEGACY_DEBUG
1376 u32 inta_mask;
1377#endif
1378
1379 spin_lock_irqsave(&il->lock, flags);
1380
1381 /* Ack/clear/reset pending uCode interrupts.
1382 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1383 * and will clear only when CSR_FH_INT_STATUS gets cleared. */
1384 inta = _il_rd(il, CSR_INT);
1385 _il_wr(il, CSR_INT, inta);
1386
1387 /* Ack/clear/reset pending flow-handler (DMA) interrupts.
1388 * Any new interrupts that happen after this, either while we're
1389 * in this tasklet, or later, will show up in next ISR/tasklet. */
1390 inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
1391 _il_wr(il, CSR_FH_INT_STATUS, inta_fh);
1392
1393#ifdef CONFIG_IWLEGACY_DEBUG
1394 if (il_get_debug_level(il) & IL_DL_ISR) {
1395 /* just for debug */
1396 inta_mask = _il_rd(il, CSR_INT_MASK);
1397 D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta,
1398 inta_mask, inta_fh);
1399 }
1400#endif
1401
1402 spin_unlock_irqrestore(&il->lock, flags);
1403
1404 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
1405 * atomic, make sure that inta covers all the interrupts that
1406 * we've discovered, even if FH interrupt came in just after
1407 * reading CSR_INT. */
1408 if (inta_fh & CSR39_FH_INT_RX_MASK)
1409 inta |= CSR_INT_BIT_FH_RX;
1410 if (inta_fh & CSR39_FH_INT_TX_MASK)
1411 inta |= CSR_INT_BIT_FH_TX;
1412
1413 /* Now service all interrupt bits discovered above. */
1414 if (inta & CSR_INT_BIT_HW_ERR) {
1415 IL_ERR("Hardware error detected. Restarting.\n");
1416
1417 /* Tell the device to stop sending interrupts */
1418 il_disable_interrupts(il);
1419
1420 il->isr_stats.hw++;
1421 il_irq_handle_error(il);
1422
1423 handled |= CSR_INT_BIT_HW_ERR;
1424
1425 return;
1426 }
1427#ifdef CONFIG_IWLEGACY_DEBUG
1428 if (il_get_debug_level(il) & (IL_DL_ISR)) {
1429 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1430 if (inta & CSR_INT_BIT_SCD) {
1431 D_ISR("Scheduler finished to transmit "
1432 "the frame/frames.\n");
1433 il->isr_stats.sch++;
1434 }
1435
1436 /* Alive notification via Rx interrupt will do the real work */
1437 if (inta & CSR_INT_BIT_ALIVE) {
1438 D_ISR("Alive interrupt\n");
1439 il->isr_stats.alive++;
1440 }
1441 }
1442#endif
1443 /* Safely ignore these bits for debug checks below */
1444 inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1445
1446 /* Error detected by uCode */
1447 if (inta & CSR_INT_BIT_SW_ERR) {
1448 IL_ERR("Microcode SW error detected. " "Restarting 0x%X.\n",
1449 inta);
1450 il->isr_stats.sw++;
1451 il_irq_handle_error(il);
1452 handled |= CSR_INT_BIT_SW_ERR;
1453 }
1454
1455 /* uCode wakes up after power-down sleep */
1456 if (inta & CSR_INT_BIT_WAKEUP) {
1457 D_ISR("Wakeup interrupt\n");
1458 il_rx_queue_update_write_ptr(il, &il->rxq);
1459
1460 spin_lock_irqsave(&il->lock, flags);
1461 il_txq_update_write_ptr(il, &il->txq[0]);
1462 il_txq_update_write_ptr(il, &il->txq[1]);
1463 il_txq_update_write_ptr(il, &il->txq[2]);
1464 il_txq_update_write_ptr(il, &il->txq[3]);
1465 il_txq_update_write_ptr(il, &il->txq[4]);
1466 spin_unlock_irqrestore(&il->lock, flags);
1467
1468 il->isr_stats.wakeup++;
1469 handled |= CSR_INT_BIT_WAKEUP;
1470 }
1471
1472 /* All uCode command responses, including Tx command responses,
1473 * Rx "responses" (frame-received notification), and other
1474 * notifications from uCode come through here*/
1475 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1476 il3945_rx_handle(il);
1477 il->isr_stats.rx++;
1478 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1479 }
1480
1481 if (inta & CSR_INT_BIT_FH_TX) {
1482 D_ISR("Tx interrupt\n");
1483 il->isr_stats.tx++;
1484
1485 _il_wr(il, CSR_FH_INT_STATUS, (1 << 6));
1486 il_wr(il, FH39_TCSR_CREDIT(FH39_SRVC_CHNL), 0x0);
1487 handled |= CSR_INT_BIT_FH_TX;
1488 }
1489
1490 if (inta & ~handled) {
1491 IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
1492 il->isr_stats.unhandled++;
1493 }
1494
1495 if (inta & ~il->inta_mask) {
1496 IL_WARN("Disabled INTA bits 0x%08x were pending\n",
1497 inta & ~il->inta_mask);
1498 IL_WARN(" with inta_fh = 0x%08x\n", inta_fh);
1499 }
1500
1501 /* Re-enable all interrupts */
1502 /* only Re-enable if disabled by irq */
1503 if (test_bit(S_INT_ENABLED, &il->status))
1504 il_enable_interrupts(il);
1505
1506#ifdef CONFIG_IWLEGACY_DEBUG
1507 if (il_get_debug_level(il) & (IL_DL_ISR)) {
1508 inta = _il_rd(il, CSR_INT);
1509 inta_mask = _il_rd(il, CSR_INT_MASK);
1510 inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
1511 D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
1512 "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
1513 }
1514#endif
1515}
1516
1517static int
1518il3945_get_channels_for_scan(struct il_priv *il, enum nl80211_band band,
1519 u8 is_active, u8 n_probes,
1520 struct il3945_scan_channel *scan_ch,
1521 struct ieee80211_vif *vif)
1522{
1523 struct ieee80211_channel *chan;
1524 const struct ieee80211_supported_band *sband;
1525 const struct il_channel_info *ch_info;
1526 u16 passive_dwell = 0;
1527 u16 active_dwell = 0;
1528 int added, i;
1529
1530 sband = il_get_hw_mode(il, band);
1531 if (!sband)
1532 return 0;
1533
1534 active_dwell = il_get_active_dwell_time(il, band, n_probes);
1535 passive_dwell = il_get_passive_dwell_time(il, band, vif);
1536
1537 if (passive_dwell <= active_dwell)
1538 passive_dwell = active_dwell + 1;
1539
1540 for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
1541 chan = il->scan_request->channels[i];
1542
1543 if (chan->band != band)
1544 continue;
1545
1546 scan_ch->channel = chan->hw_value;
1547
1548 ch_info = il_get_channel_info(il, band, scan_ch->channel);
1549 if (!il_is_channel_valid(ch_info)) {
1550 D_SCAN("Channel %d is INVALID for this band.\n",
1551 scan_ch->channel);
1552 continue;
1553 }
1554
1555 scan_ch->active_dwell = cpu_to_le16(active_dwell);
1556 scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
1557 /* If passive , set up for auto-switch
1558 * and use long active_dwell time.
1559 */
1560 if (!is_active || il_is_channel_passive(ch_info) ||
1561 (chan->flags & IEEE80211_CHAN_NO_IR)) {
1562 scan_ch->type = 0; /* passive */
1563 if (IL_UCODE_API(il->ucode_ver) == 1)
1564 scan_ch->active_dwell =
1565 cpu_to_le16(passive_dwell - 1);
1566 } else {
1567 scan_ch->type = 1; /* active */
1568 }
1569
1570 /* Set direct probe bits. These may be used both for active
1571 * scan channels (probes gets sent right away),
1572 * or for passive channels (probes get se sent only after
1573 * hearing clear Rx packet).*/
1574 if (IL_UCODE_API(il->ucode_ver) >= 2) {
1575 if (n_probes)
1576 scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
1577 } else {
1578 /* uCode v1 does not allow setting direct probe bits on
1579 * passive channel. */
1580 if ((scan_ch->type & 1) && n_probes)
1581 scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
1582 }
1583
1584 /* Set txpower levels to defaults */
1585 scan_ch->tpc.dsp_atten = 110;
1586 /* scan_pwr_info->tpc.dsp_atten; */
1587
1588 /*scan_pwr_info->tpc.tx_gain; */
1589 if (band == NL80211_BAND_5GHZ)
1590 scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
1591 else {
1592 scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
1593 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
1594 * power level:
1595 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
1596 */
1597 }
1598
1599 D_SCAN("Scanning %d [%s %d]\n", scan_ch->channel,
1600 (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
1601 (scan_ch->type & 1) ? active_dwell : passive_dwell);
1602
1603 scan_ch++;
1604 added++;
1605 }
1606
1607 D_SCAN("total channels to scan %d\n", added);
1608 return added;
1609}
1610
1611static void
1612il3945_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates)
1613{
1614 int i;
1615
1616 for (i = 0; i < RATE_COUNT_LEGACY; i++) {
1617 rates[i].bitrate = il3945_rates[i].ieee * 5;
1618 rates[i].hw_value = i; /* Rate scaling will work on idxes */
1619 rates[i].hw_value_short = i;
1620 rates[i].flags = 0;
1621 if (i > IL39_LAST_OFDM_RATE || i < IL_FIRST_OFDM_RATE) {
1622 /*
1623 * If CCK != 1M then set short preamble rate flag.
1624 */
1625 rates[i].flags |=
1626 (il3945_rates[i].plcp ==
1627 10) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE;
1628 }
1629 }
1630}
1631
1632/******************************************************************************
1633 *
1634 * uCode download functions
1635 *
1636 ******************************************************************************/
1637
1638static void
1639il3945_dealloc_ucode_pci(struct il_priv *il)
1640{
1641 il_free_fw_desc(il->pci_dev, &il->ucode_code);
1642 il_free_fw_desc(il->pci_dev, &il->ucode_data);
1643 il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
1644 il_free_fw_desc(il->pci_dev, &il->ucode_init);
1645 il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
1646 il_free_fw_desc(il->pci_dev, &il->ucode_boot);
1647}
1648
1649/*
1650 * il3945_verify_inst_full - verify runtime uCode image in card vs. host,
1651 * looking at all data.
1652 */
1653static int
1654il3945_verify_inst_full(struct il_priv *il, __le32 * image, u32 len)
1655{
1656 u32 val;
1657 u32 save_len = len;
1658 int rc = 0;
1659 u32 errcnt;
1660
1661 D_INFO("ucode inst image size is %u\n", len);
1662
1663 il_wr(il, HBUS_TARG_MEM_RADDR, IL39_RTC_INST_LOWER_BOUND);
1664
1665 errcnt = 0;
1666 for (; len > 0; len -= sizeof(u32), image++) {
1667 /* read data comes through single port, auto-incr addr */
1668 /* NOTE: Use the debugless read so we don't flood kernel log
1669 * if IL_DL_IO is set */
1670 val = _il_rd(il, HBUS_TARG_MEM_RDAT);
1671 if (val != le32_to_cpu(*image)) {
1672 IL_ERR("uCode INST section is invalid at "
1673 "offset 0x%x, is 0x%x, s/b 0x%x\n",
1674 save_len - len, val, le32_to_cpu(*image));
1675 rc = -EIO;
1676 errcnt++;
1677 if (errcnt >= 20)
1678 break;
1679 }
1680 }
1681
1682 if (!errcnt)
1683 D_INFO("ucode image in INSTRUCTION memory is good\n");
1684
1685 return rc;
1686}
1687
1688/*
1689 * il3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
1690 * using sample data 100 bytes apart. If these sample points are good,
1691 * it's a pretty good bet that everything between them is good, too.
1692 */
1693static int
1694il3945_verify_inst_sparse(struct il_priv *il, __le32 * image, u32 len)
1695{
1696 u32 val;
1697 int rc = 0;
1698 u32 errcnt = 0;
1699 u32 i;
1700
1701 D_INFO("ucode inst image size is %u\n", len);
1702
1703 for (i = 0; i < len; i += 100, image += 100 / sizeof(u32)) {
1704 /* read data comes through single port, auto-incr addr */
1705 /* NOTE: Use the debugless read so we don't flood kernel log
1706 * if IL_DL_IO is set */
1707 il_wr(il, HBUS_TARG_MEM_RADDR, i + IL39_RTC_INST_LOWER_BOUND);
1708 val = _il_rd(il, HBUS_TARG_MEM_RDAT);
1709 if (val != le32_to_cpu(*image)) {
1710#if 0 /* Enable this if you want to see details */
1711 IL_ERR("uCode INST section is invalid at "
1712 "offset 0x%x, is 0x%x, s/b 0x%x\n", i, val,
1713 *image);
1714#endif
1715 rc = -EIO;
1716 errcnt++;
1717 if (errcnt >= 3)
1718 break;
1719 }
1720 }
1721
1722 return rc;
1723}
1724
1725/*
1726 * il3945_verify_ucode - determine which instruction image is in SRAM,
1727 * and verify its contents
1728 */
1729static int
1730il3945_verify_ucode(struct il_priv *il)
1731{
1732 __le32 *image;
1733 u32 len;
1734 int rc = 0;
1735
1736 /* Try bootstrap */
1737 image = (__le32 *) il->ucode_boot.v_addr;
1738 len = il->ucode_boot.len;
1739 rc = il3945_verify_inst_sparse(il, image, len);
1740 if (rc == 0) {
1741 D_INFO("Bootstrap uCode is good in inst SRAM\n");
1742 return 0;
1743 }
1744
1745 /* Try initialize */
1746 image = (__le32 *) il->ucode_init.v_addr;
1747 len = il->ucode_init.len;
1748 rc = il3945_verify_inst_sparse(il, image, len);
1749 if (rc == 0) {
1750 D_INFO("Initialize uCode is good in inst SRAM\n");
1751 return 0;
1752 }
1753
1754 /* Try runtime/protocol */
1755 image = (__le32 *) il->ucode_code.v_addr;
1756 len = il->ucode_code.len;
1757 rc = il3945_verify_inst_sparse(il, image, len);
1758 if (rc == 0) {
1759 D_INFO("Runtime uCode is good in inst SRAM\n");
1760 return 0;
1761 }
1762
1763 IL_ERR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
1764
1765 /* Since nothing seems to match, show first several data entries in
1766 * instruction SRAM, so maybe visual inspection will give a clue.
1767 * Selection of bootstrap image (vs. other images) is arbitrary. */
1768 image = (__le32 *) il->ucode_boot.v_addr;
1769 len = il->ucode_boot.len;
1770 rc = il3945_verify_inst_full(il, image, len);
1771
1772 return rc;
1773}
1774
1775static void
1776il3945_nic_start(struct il_priv *il)
1777{
1778 /* Remove all resets to allow NIC to operate */
1779 _il_wr(il, CSR_RESET, 0);
1780}
1781
1782#define IL3945_UCODE_GET(item) \
1783static u32 il3945_ucode_get_##item(const struct il_ucode_header *ucode)\
1784{ \
1785 return le32_to_cpu(ucode->v1.item); \
1786}
1787
1788static u32
1789il3945_ucode_get_header_size(u32 api_ver)
1790{
1791 return 24;
1792}
1793
1794static u8 *
1795il3945_ucode_get_data(const struct il_ucode_header *ucode)
1796{
1797 return (u8 *) ucode->v1.data;
1798}
1799
1800IL3945_UCODE_GET(inst_size);
1801IL3945_UCODE_GET(data_size);
1802IL3945_UCODE_GET(init_size);
1803IL3945_UCODE_GET(init_data_size);
1804IL3945_UCODE_GET(boot_size);
1805
1806/*
1807 * il3945_read_ucode - Read uCode images from disk file.
1808 *
1809 * Copy into buffers for card to fetch via bus-mastering
1810 */
1811static int
1812il3945_read_ucode(struct il_priv *il)
1813{
1814 const struct il_ucode_header *ucode;
1815 int ret = -EINVAL, idx;
1816 const struct firmware *ucode_raw;
1817 /* firmware file name contains uCode/driver compatibility version */
1818 const char *name_pre = il->cfg->fw_name_pre;
1819 const unsigned int api_max = il->cfg->ucode_api_max;
1820 const unsigned int api_min = il->cfg->ucode_api_min;
1821 char buf[25];
1822 u8 *src;
1823 size_t len;
1824 u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
1825
1826 /* Ask kernel firmware_class module to get the boot firmware off disk.
1827 * request_firmware() is synchronous, file is in memory on return. */
1828 for (idx = api_max; idx >= api_min; idx--) {
1829 sprintf(buf, "%s%u%s", name_pre, idx, ".ucode");
1830 ret = request_firmware(&ucode_raw, buf, &il->pci_dev->dev);
1831 if (ret < 0) {
1832 IL_ERR("%s firmware file req failed: %d\n", buf, ret);
1833 if (ret == -ENOENT)
1834 continue;
1835 else
1836 goto error;
1837 } else {
1838 if (idx < api_max)
1839 IL_ERR("Loaded firmware %s, "
1840 "which is deprecated. "
1841 " Please use API v%u instead.\n", buf,
1842 api_max);
1843 D_INFO("Got firmware '%s' file "
1844 "(%zd bytes) from disk\n", buf, ucode_raw->size);
1845 break;
1846 }
1847 }
1848
1849 if (ret < 0)
1850 goto error;
1851
1852 /* Make sure that we got at least our header! */
1853 if (ucode_raw->size < il3945_ucode_get_header_size(1)) {
1854 IL_ERR("File size way too small!\n");
1855 ret = -EINVAL;
1856 goto err_release;
1857 }
1858
1859 /* Data from ucode file: header followed by uCode images */
1860 ucode = (struct il_ucode_header *)ucode_raw->data;
1861
1862 il->ucode_ver = le32_to_cpu(ucode->ver);
1863 api_ver = IL_UCODE_API(il->ucode_ver);
1864 inst_size = il3945_ucode_get_inst_size(ucode);
1865 data_size = il3945_ucode_get_data_size(ucode);
1866 init_size = il3945_ucode_get_init_size(ucode);
1867 init_data_size = il3945_ucode_get_init_data_size(ucode);
1868 boot_size = il3945_ucode_get_boot_size(ucode);
1869 src = il3945_ucode_get_data(ucode);
1870
1871 /* api_ver should match the api version forming part of the
1872 * firmware filename ... but we don't check for that and only rely
1873 * on the API version read from firmware header from here on forward */
1874
1875 if (api_ver < api_min || api_ver > api_max) {
1876 IL_ERR("Driver unable to support your firmware API. "
1877 "Driver supports v%u, firmware is v%u.\n", api_max,
1878 api_ver);
1879 il->ucode_ver = 0;
1880 ret = -EINVAL;
1881 goto err_release;
1882 }
1883 if (api_ver != api_max)
1884 IL_ERR("Firmware has old API version. Expected %u, "
1885 "got %u. New firmware can be obtained "
1886 "from http://www.intellinuxwireless.org.\n", api_max,
1887 api_ver);
1888
1889 IL_INFO("loaded firmware version %u.%u.%u.%u\n",
1890 IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver),
1891 IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver));
1892
1893 snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version),
1894 "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver),
1895 IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver),
1896 IL_UCODE_SERIAL(il->ucode_ver));
1897
1898 D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver);
1899 D_INFO("f/w package hdr runtime inst size = %u\n", inst_size);
1900 D_INFO("f/w package hdr runtime data size = %u\n", data_size);
1901 D_INFO("f/w package hdr init inst size = %u\n", init_size);
1902 D_INFO("f/w package hdr init data size = %u\n", init_data_size);
1903 D_INFO("f/w package hdr boot inst size = %u\n", boot_size);
1904
1905 /* Verify size of file vs. image size info in file's header */
1906 if (ucode_raw->size !=
1907 il3945_ucode_get_header_size(api_ver) + inst_size + data_size +
1908 init_size + init_data_size + boot_size) {
1909
1910 D_INFO("uCode file size %zd does not match expected size\n",
1911 ucode_raw->size);
1912 ret = -EINVAL;
1913 goto err_release;
1914 }
1915
1916 /* Verify that uCode images will fit in card's SRAM */
1917 if (inst_size > IL39_MAX_INST_SIZE) {
1918 D_INFO("uCode instr len %d too large to fit in\n", inst_size);
1919 ret = -EINVAL;
1920 goto err_release;
1921 }
1922
1923 if (data_size > IL39_MAX_DATA_SIZE) {
1924 D_INFO("uCode data len %d too large to fit in\n", data_size);
1925 ret = -EINVAL;
1926 goto err_release;
1927 }
1928 if (init_size > IL39_MAX_INST_SIZE) {
1929 D_INFO("uCode init instr len %d too large to fit in\n",
1930 init_size);
1931 ret = -EINVAL;
1932 goto err_release;
1933 }
1934 if (init_data_size > IL39_MAX_DATA_SIZE) {
1935 D_INFO("uCode init data len %d too large to fit in\n",
1936 init_data_size);
1937 ret = -EINVAL;
1938 goto err_release;
1939 }
1940 if (boot_size > IL39_MAX_BSM_SIZE) {
1941 D_INFO("uCode boot instr len %d too large to fit in\n",
1942 boot_size);
1943 ret = -EINVAL;
1944 goto err_release;
1945 }
1946
1947 /* Allocate ucode buffers for card's bus-master loading ... */
1948
1949 /* Runtime instructions and 2 copies of data:
1950 * 1) unmodified from disk
1951 * 2) backup cache for save/restore during power-downs */
1952 il->ucode_code.len = inst_size;
1953 il_alloc_fw_desc(il->pci_dev, &il->ucode_code);
1954
1955 il->ucode_data.len = data_size;
1956 il_alloc_fw_desc(il->pci_dev, &il->ucode_data);
1957
1958 il->ucode_data_backup.len = data_size;
1959 il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);
1960
1961 if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
1962 !il->ucode_data_backup.v_addr)
1963 goto err_pci_alloc;
1964
1965 /* Initialization instructions and data */
1966 if (init_size && init_data_size) {
1967 il->ucode_init.len = init_size;
1968 il_alloc_fw_desc(il->pci_dev, &il->ucode_init);
1969
1970 il->ucode_init_data.len = init_data_size;
1971 il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);
1972
1973 if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
1974 goto err_pci_alloc;
1975 }
1976
1977 /* Bootstrap (instructions only, no data) */
1978 if (boot_size) {
1979 il->ucode_boot.len = boot_size;
1980 il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);
1981
1982 if (!il->ucode_boot.v_addr)
1983 goto err_pci_alloc;
1984 }
1985
1986 /* Copy images into buffers for card's bus-master reads ... */
1987
1988 /* Runtime instructions (first block of data in file) */
1989 len = inst_size;
1990 D_INFO("Copying (but not loading) uCode instr len %zd\n", len);
1991 memcpy(il->ucode_code.v_addr, src, len);
1992 src += len;
1993
1994 D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
1995 il->ucode_code.v_addr, (u32) il->ucode_code.p_addr);
1996
1997 /* Runtime data (2nd block)
1998 * NOTE: Copy into backup buffer will be done in il3945_up() */
1999 len = data_size;
2000 D_INFO("Copying (but not loading) uCode data len %zd\n", len);
2001 memcpy(il->ucode_data.v_addr, src, len);
2002 memcpy(il->ucode_data_backup.v_addr, src, len);
2003 src += len;
2004
2005 /* Initialization instructions (3rd block) */
2006 if (init_size) {
2007 len = init_size;
2008 D_INFO("Copying (but not loading) init instr len %zd\n", len);
2009 memcpy(il->ucode_init.v_addr, src, len);
2010 src += len;
2011 }
2012
2013 /* Initialization data (4th block) */
2014 if (init_data_size) {
2015 len = init_data_size;
2016 D_INFO("Copying (but not loading) init data len %zd\n", len);
2017 memcpy(il->ucode_init_data.v_addr, src, len);
2018 src += len;
2019 }
2020
2021 /* Bootstrap instructions (5th block) */
2022 len = boot_size;
2023 D_INFO("Copying (but not loading) boot instr len %zd\n", len);
2024 memcpy(il->ucode_boot.v_addr, src, len);
2025
2026 /* We have our copies now, allow OS release its copies */
2027 release_firmware(ucode_raw);
2028 return 0;
2029
2030err_pci_alloc:
2031 IL_ERR("failed to allocate pci memory\n");
2032 ret = -ENOMEM;
2033 il3945_dealloc_ucode_pci(il);
2034
2035err_release:
2036 release_firmware(ucode_raw);
2037
2038error:
2039 return ret;
2040}
2041
2042/*
2043 * il3945_set_ucode_ptrs - Set uCode address location
2044 *
2045 * Tell initialization uCode where to find runtime uCode.
2046 *
2047 * BSM registers initially contain pointers to initialization uCode.
2048 * We need to replace them to load runtime uCode inst and data,
2049 * and to save runtime data when powering down.
2050 */
2051static int
2052il3945_set_ucode_ptrs(struct il_priv *il)
2053{
2054 dma_addr_t pinst;
2055 dma_addr_t pdata;
2056
2057 /* bits 31:0 for 3945 */
2058 pinst = il->ucode_code.p_addr;
2059 pdata = il->ucode_data_backup.p_addr;
2060
2061 /* Tell bootstrap uCode where to find image to load */
2062 il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
2063 il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
2064 il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, il->ucode_data.len);
2065
2066 /* Inst byte count must be last to set up, bit 31 signals uCode
2067 * that all new ptr/size info is in place */
2068 il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
2069 il->ucode_code.len | BSM_DRAM_INST_LOAD);
2070
2071 D_INFO("Runtime uCode pointers are set.\n");
2072
2073 return 0;
2074}
2075
2076/*
2077 * il3945_init_alive_start - Called after N_ALIVE notification received
2078 *
2079 * Called after N_ALIVE notification received from "initialize" uCode.
2080 *
2081 * Tell "initialize" uCode to go ahead and load the runtime uCode.
2082 */
2083static void
2084il3945_init_alive_start(struct il_priv *il)
2085{
2086 /* Check alive response for "valid" sign from uCode */
2087 if (il->card_alive_init.is_valid != UCODE_VALID_OK) {
2088 /* We had an error bringing up the hardware, so take it
2089 * all the way back down so we can try again */
2090 D_INFO("Initialize Alive failed.\n");
2091 goto restart;
2092 }
2093
2094 /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
2095 * This is a paranoid check, because we would not have gotten the
2096 * "initialize" alive if code weren't properly loaded. */
2097 if (il3945_verify_ucode(il)) {
2098 /* Runtime instruction load was bad;
2099 * take it all the way back down so we can try again */
2100 D_INFO("Bad \"initialize\" uCode load.\n");
2101 goto restart;
2102 }
2103
2104 /* Send pointers to protocol/runtime uCode image ... init code will
2105 * load and launch runtime uCode, which will send us another "Alive"
2106 * notification. */
2107 D_INFO("Initialization Alive received.\n");
2108 if (il3945_set_ucode_ptrs(il)) {
2109 /* Runtime instruction load won't happen;
2110 * take it all the way back down so we can try again */
2111 D_INFO("Couldn't set up uCode pointers.\n");
2112 goto restart;
2113 }
2114 return;
2115
2116restart:
2117 queue_work(il->workqueue, &il->restart);
2118}
2119
2120/*
2121 * il3945_alive_start - called after N_ALIVE notification received
2122 * from protocol/runtime uCode (initialization uCode's
2123 * Alive gets handled by il3945_init_alive_start()).
2124 */
2125static void
2126il3945_alive_start(struct il_priv *il)
2127{
2128 int thermal_spin = 0;
2129 u32 rfkill;
2130
2131 D_INFO("Runtime Alive received.\n");
2132
2133 if (il->card_alive.is_valid != UCODE_VALID_OK) {
2134 /* We had an error bringing up the hardware, so take it
2135 * all the way back down so we can try again */
2136 D_INFO("Alive failed.\n");
2137 goto restart;
2138 }
2139
2140 /* Initialize uCode has loaded Runtime uCode ... verify inst image.
2141 * This is a paranoid check, because we would not have gotten the
2142 * "runtime" alive if code weren't properly loaded. */
2143 if (il3945_verify_ucode(il)) {
2144 /* Runtime instruction load was bad;
2145 * take it all the way back down so we can try again */
2146 D_INFO("Bad runtime uCode load.\n");
2147 goto restart;
2148 }
2149
2150 rfkill = il_rd_prph(il, APMG_RFKILL_REG);
2151 D_INFO("RFKILL status: 0x%x\n", rfkill);
2152
2153 if (rfkill & 0x1) {
2154 clear_bit(S_RFKILL, &il->status);
2155 /* if RFKILL is not on, then wait for thermal
2156 * sensor in adapter to kick in */
2157 while (il3945_hw_get_temperature(il) == 0) {
2158 thermal_spin++;
2159 udelay(10);
2160 }
2161
2162 if (thermal_spin)
2163 D_INFO("Thermal calibration took %dus\n",
2164 thermal_spin * 10);
2165 } else
2166 set_bit(S_RFKILL, &il->status);
2167
2168 /* After the ALIVE response, we can send commands to 3945 uCode */
2169 set_bit(S_ALIVE, &il->status);
2170
2171 /* Enable watchdog to monitor the driver tx queues */
2172 il_setup_watchdog(il);
2173
2174 if (il_is_rfkill(il))
2175 return;
2176
2177 ieee80211_wake_queues(il->hw);
2178
2179 il->active_rate = RATES_MASK_3945;
2180
2181 il_power_update_mode(il, true);
2182
2183 if (il_is_associated(il)) {
2184 struct il3945_rxon_cmd *active_rxon =
2185 (struct il3945_rxon_cmd *)(&il->active);
2186
2187 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2188 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2189 } else {
2190 /* Initialize our rx_config data */
2191 il_connection_init_rx_config(il);
2192 }
2193
2194 /* Configure Bluetooth device coexistence support */
2195 il_send_bt_config(il);
2196
2197 set_bit(S_READY, &il->status);
2198
2199 /* Configure the adapter for unassociated operation */
2200 il3945_commit_rxon(il);
2201
2202 il3945_reg_txpower_periodic(il);
2203
2204 D_INFO("ALIVE processing complete.\n");
2205 wake_up(&il->wait_command_queue);
2206
2207 return;
2208
2209restart:
2210 queue_work(il->workqueue, &il->restart);
2211}
2212
2213static void il3945_cancel_deferred_work(struct il_priv *il);
2214
2215static void
2216__il3945_down(struct il_priv *il)
2217{
2218 unsigned long flags;
2219 int exit_pending;
2220
2221 D_INFO(DRV_NAME " is going down\n");
2222
2223 il_scan_cancel_timeout(il, 200);
2224
2225 exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status);
2226
2227 /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set
2228 * to prevent rearm timer */
2229 del_timer_sync(&il->watchdog);
2230
2231 /* Station information will now be cleared in device */
2232 il_clear_ucode_stations(il);
2233 il_dealloc_bcast_stations(il);
2234 il_clear_driver_stations(il);
2235
2236 /* Unblock any waiting calls */
2237 wake_up_all(&il->wait_command_queue);
2238
2239 /* Wipe out the EXIT_PENDING status bit if we are not actually
2240 * exiting the module */
2241 if (!exit_pending)
2242 clear_bit(S_EXIT_PENDING, &il->status);
2243
2244 /* stop and reset the on-board processor */
2245 _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
2246
2247 /* tell the device to stop sending interrupts */
2248 spin_lock_irqsave(&il->lock, flags);
2249 il_disable_interrupts(il);
2250 spin_unlock_irqrestore(&il->lock, flags);
2251 il3945_synchronize_irq(il);
2252
2253 if (il->mac80211_registered)
2254 ieee80211_stop_queues(il->hw);
2255
2256 /* If we have not previously called il3945_init() then
2257 * clear all bits but the RF Kill bits and return */
2258 if (!il_is_init(il)) {
2259 il->status =
2260 test_bit(S_RFKILL, &il->status) << S_RFKILL |
2261 test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
2262 test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
2263 goto exit;
2264 }
2265
2266 /* ...otherwise clear out all the status bits but the RF Kill
2267 * bit and continue taking the NIC down. */
2268 il->status &=
2269 test_bit(S_RFKILL, &il->status) << S_RFKILL |
2270 test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
2271 test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR |
2272 test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
2273
2274 /*
2275 * We disabled and synchronized interrupt, and priv->mutex is taken, so
2276 * here is the only thread which will program device registers, but
2277 * still have lockdep assertions, so we are taking reg_lock.
2278 */
2279 spin_lock_irq(&il->reg_lock);
2280 /* FIXME: il_grab_nic_access if rfkill is off ? */
2281
2282 il3945_hw_txq_ctx_stop(il);
2283 il3945_hw_rxq_stop(il);
2284 /* Power-down device's busmaster DMA clocks */
2285 _il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
2286 udelay(5);
2287 /* Stop the device, and put it in low power state */
2288 _il_apm_stop(il);
2289
2290 spin_unlock_irq(&il->reg_lock);
2291
2292 il3945_hw_txq_ctx_free(il);
2293exit:
2294 memset(&il->card_alive, 0, sizeof(struct il_alive_resp));
2295 dev_kfree_skb(il->beacon_skb);
2296 il->beacon_skb = NULL;
2297
2298 /* clear out any free frames */
2299 il3945_clear_free_frames(il);
2300}
2301
2302static void
2303il3945_down(struct il_priv *il)
2304{
2305 mutex_lock(&il->mutex);
2306 __il3945_down(il);
2307 mutex_unlock(&il->mutex);
2308
2309 il3945_cancel_deferred_work(il);
2310}
2311
2312#define MAX_HW_RESTARTS 5
2313
2314static int
2315il3945_alloc_bcast_station(struct il_priv *il)
2316{
2317 unsigned long flags;
2318 u8 sta_id;
2319
2320 spin_lock_irqsave(&il->sta_lock, flags);
2321 sta_id = il_prep_station(il, il_bcast_addr, false, NULL);
2322 if (sta_id == IL_INVALID_STATION) {
2323 IL_ERR("Unable to prepare broadcast station\n");
2324 spin_unlock_irqrestore(&il->sta_lock, flags);
2325
2326 return -EINVAL;
2327 }
2328
2329 il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE;
2330 il->stations[sta_id].used |= IL_STA_BCAST;
2331 spin_unlock_irqrestore(&il->sta_lock, flags);
2332
2333 return 0;
2334}
2335
2336static int
2337__il3945_up(struct il_priv *il)
2338{
2339 int rc, i;
2340
2341 rc = il3945_alloc_bcast_station(il);
2342 if (rc)
2343 return rc;
2344
2345 if (test_bit(S_EXIT_PENDING, &il->status)) {
2346 IL_WARN("Exit pending; will not bring the NIC up\n");
2347 return -EIO;
2348 }
2349
2350 if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
2351 IL_ERR("ucode not available for device bring up\n");
2352 return -EIO;
2353 }
2354
2355 /* If platform's RF_KILL switch is NOT set to KILL */
2356 if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
2357 clear_bit(S_RFKILL, &il->status);
2358 else {
2359 set_bit(S_RFKILL, &il->status);
2360 return -ERFKILL;
2361 }
2362
2363 _il_wr(il, CSR_INT, 0xFFFFFFFF);
2364
2365 rc = il3945_hw_nic_init(il);
2366 if (rc) {
2367 IL_ERR("Unable to int nic\n");
2368 return rc;
2369 }
2370
2371 /* make sure rfkill handshake bits are cleared */
2372 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2373 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
2374
2375 /* clear (again), then enable host interrupts */
2376 _il_wr(il, CSR_INT, 0xFFFFFFFF);
2377 il_enable_interrupts(il);
2378
2379 /* really make sure rfkill handshake bits are cleared */
2380 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2381 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2382
2383 /* Copy original ucode data image from disk into backup cache.
2384 * This will be used to initialize the on-board processor's
2385 * data SRAM for a clean start when the runtime program first loads. */
2386 memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
2387 il->ucode_data.len);
2388
2389 /* We return success when we resume from suspend and rf_kill is on. */
2390 if (test_bit(S_RFKILL, &il->status))
2391 return 0;
2392
2393 for (i = 0; i < MAX_HW_RESTARTS; i++) {
2394
2395 /* load bootstrap state machine,
2396 * load bootstrap program into processor's memory,
2397 * prepare to load the "initialize" uCode */
2398 rc = il->ops->load_ucode(il);
2399
2400 if (rc) {
2401 IL_ERR("Unable to set up bootstrap uCode: %d\n", rc);
2402 continue;
2403 }
2404
2405 /* start card; "initialize" will load runtime ucode */
2406 il3945_nic_start(il);
2407
2408 D_INFO(DRV_NAME " is coming up\n");
2409
2410 return 0;
2411 }
2412
2413 set_bit(S_EXIT_PENDING, &il->status);
2414 __il3945_down(il);
2415 clear_bit(S_EXIT_PENDING, &il->status);
2416
2417 /* tried to restart and config the device for as long as our
2418 * patience could withstand */
2419 IL_ERR("Unable to initialize device after %d attempts.\n", i);
2420 return -EIO;
2421}
2422
2423/*****************************************************************************
2424 *
2425 * Workqueue callbacks
2426 *
2427 *****************************************************************************/
2428
2429static void
2430il3945_bg_init_alive_start(struct work_struct *data)
2431{
2432 struct il_priv *il =
2433 container_of(data, struct il_priv, init_alive_start.work);
2434
2435 mutex_lock(&il->mutex);
2436 if (test_bit(S_EXIT_PENDING, &il->status))
2437 goto out;
2438
2439 il3945_init_alive_start(il);
2440out:
2441 mutex_unlock(&il->mutex);
2442}
2443
2444static void
2445il3945_bg_alive_start(struct work_struct *data)
2446{
2447 struct il_priv *il =
2448 container_of(data, struct il_priv, alive_start.work);
2449
2450 mutex_lock(&il->mutex);
2451 if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL)
2452 goto out;
2453
2454 il3945_alive_start(il);
2455out:
2456 mutex_unlock(&il->mutex);
2457}
2458
2459/*
2460 * 3945 cannot interrupt driver when hardware rf kill switch toggles;
2461 * driver must poll CSR_GP_CNTRL_REG register for change. This register
2462 * *is* readable even when device has been SW_RESET into low power mode
2463 * (e.g. during RF KILL).
2464 */
2465static void
2466il3945_rfkill_poll(struct work_struct *data)
2467{
2468 struct il_priv *il =
2469 container_of(data, struct il_priv, _3945.rfkill_poll.work);
2470 bool old_rfkill = test_bit(S_RFKILL, &il->status);
2471 bool new_rfkill =
2472 !(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
2473
2474 if (new_rfkill != old_rfkill) {
2475 if (new_rfkill)
2476 set_bit(S_RFKILL, &il->status);
2477 else
2478 clear_bit(S_RFKILL, &il->status);
2479
2480 wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill);
2481
2482 D_RF_KILL("RF_KILL bit toggled to %s.\n",
2483 new_rfkill ? "disable radio" : "enable radio");
2484 }
2485
2486 /* Keep this running, even if radio now enabled. This will be
2487 * cancelled in mac_start() if system decides to start again */
2488 queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
2489 round_jiffies_relative(2 * HZ));
2490
2491}
2492
2493int
2494il3945_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
2495{
2496 struct il_host_cmd cmd = {
2497 .id = C_SCAN,
2498 .len = sizeof(struct il3945_scan_cmd),
2499 .flags = CMD_SIZE_HUGE,
2500 };
2501 struct il3945_scan_cmd *scan;
2502 u8 n_probes = 0;
2503 enum nl80211_band band;
2504 bool is_active = false;
2505 int ret;
2506 u16 len;
2507
2508 lockdep_assert_held(&il->mutex);
2509
2510 if (!il->scan_cmd) {
2511 il->scan_cmd =
2512 kmalloc(sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE,
2513 GFP_KERNEL);
2514 if (!il->scan_cmd) {
2515 D_SCAN("Fail to allocate scan memory\n");
2516 return -ENOMEM;
2517 }
2518 }
2519 scan = il->scan_cmd;
2520 memset(scan, 0, sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE);
2521
2522 scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
2523 scan->quiet_time = IL_ACTIVE_QUIET_TIME;
2524
2525 if (il_is_associated(il)) {
2526 u16 interval;
2527 u32 extra;
2528 u32 suspend_time = 100;
2529 u32 scan_suspend_time = 100;
2530
2531 D_INFO("Scanning while associated...\n");
2532
2533 interval = vif->bss_conf.beacon_int;
2534
2535 scan->suspend_time = 0;
2536 scan->max_out_time = cpu_to_le32(200 * 1024);
2537 if (!interval)
2538 interval = suspend_time;
2539 /*
2540 * suspend time format:
2541 * 0-19: beacon interval in usec (time before exec.)
2542 * 20-23: 0
2543 * 24-31: number of beacons (suspend between channels)
2544 */
2545
2546 extra = (suspend_time / interval) << 24;
2547 scan_suspend_time =
2548 0xFF0FFFFF & (extra | ((suspend_time % interval) * 1024));
2549
2550 scan->suspend_time = cpu_to_le32(scan_suspend_time);
2551 D_SCAN("suspend_time 0x%X beacon interval %d\n",
2552 scan_suspend_time, interval);
2553 }
2554
2555 if (il->scan_request->n_ssids) {
2556 int i, p = 0;
2557 D_SCAN("Kicking off active scan\n");
2558 for (i = 0; i < il->scan_request->n_ssids; i++) {
2559 /* always does wildcard anyway */
2560 if (!il->scan_request->ssids[i].ssid_len)
2561 continue;
2562 scan->direct_scan[p].id = WLAN_EID_SSID;
2563 scan->direct_scan[p].len =
2564 il->scan_request->ssids[i].ssid_len;
2565 memcpy(scan->direct_scan[p].ssid,
2566 il->scan_request->ssids[i].ssid,
2567 il->scan_request->ssids[i].ssid_len);
2568 n_probes++;
2569 p++;
2570 }
2571 is_active = true;
2572 } else
2573 D_SCAN("Kicking off passive scan.\n");
2574
2575 /* We don't build a direct scan probe request; the uCode will do
2576 * that based on the direct_mask added to each channel entry */
2577 scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
2578 scan->tx_cmd.sta_id = il->hw_params.bcast_id;
2579 scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2580
2581 /* flags + rate selection */
2582
2583 switch (il->scan_band) {
2584 case NL80211_BAND_2GHZ:
2585 scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
2586 scan->tx_cmd.rate = RATE_1M_PLCP;
2587 band = NL80211_BAND_2GHZ;
2588 break;
2589 case NL80211_BAND_5GHZ:
2590 scan->tx_cmd.rate = RATE_6M_PLCP;
2591 band = NL80211_BAND_5GHZ;
2592 break;
2593 default:
2594 IL_WARN("Invalid scan band\n");
2595 return -EIO;
2596 }
2597
2598 /*
2599 * If active scaning is requested but a certain channel is marked
2600 * passive, we can do active scanning if we detect transmissions. For
2601 * passive only scanning disable switching to active on any channel.
2602 */
2603 scan->good_CRC_th =
2604 is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER;
2605
2606 len =
2607 il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data,
2608 vif->addr, il->scan_request->ie,
2609 il->scan_request->ie_len,
2610 IL_MAX_SCAN_SIZE - sizeof(*scan));
2611 scan->tx_cmd.len = cpu_to_le16(len);
2612
2613 /* select Rx antennas */
2614 scan->flags |= il3945_get_antenna_flags(il);
2615
2616 scan->channel_count =
2617 il3945_get_channels_for_scan(il, band, is_active, n_probes,
2618 (void *)&scan->data[len], vif);
2619 if (scan->channel_count == 0) {
2620 D_SCAN("channel count %d\n", scan->channel_count);
2621 return -EIO;
2622 }
2623
2624 cmd.len +=
2625 le16_to_cpu(scan->tx_cmd.len) +
2626 scan->channel_count * sizeof(struct il3945_scan_channel);
2627 cmd.data = scan;
2628 scan->len = cpu_to_le16(cmd.len);
2629
2630 set_bit(S_SCAN_HW, &il->status);
2631 ret = il_send_cmd_sync(il, &cmd);
2632 if (ret)
2633 clear_bit(S_SCAN_HW, &il->status);
2634 return ret;
2635}
2636
2637void
2638il3945_post_scan(struct il_priv *il)
2639{
2640 /*
2641 * Since setting the RXON may have been deferred while
2642 * performing the scan, fire one off if needed
2643 */
2644 if (memcmp(&il->staging, &il->active, sizeof(il->staging)))
2645 il3945_commit_rxon(il);
2646}
2647
2648static void
2649il3945_bg_restart(struct work_struct *data)
2650{
2651 struct il_priv *il = container_of(data, struct il_priv, restart);
2652
2653 if (test_bit(S_EXIT_PENDING, &il->status))
2654 return;
2655
2656 if (test_and_clear_bit(S_FW_ERROR, &il->status)) {
2657 mutex_lock(&il->mutex);
2658 il->is_open = 0;
2659 mutex_unlock(&il->mutex);
2660 il3945_down(il);
2661 ieee80211_restart_hw(il->hw);
2662 } else {
2663 il3945_down(il);
2664
2665 mutex_lock(&il->mutex);
2666 if (test_bit(S_EXIT_PENDING, &il->status)) {
2667 mutex_unlock(&il->mutex);
2668 return;
2669 }
2670
2671 __il3945_up(il);
2672 mutex_unlock(&il->mutex);
2673 }
2674}
2675
2676static void
2677il3945_bg_rx_replenish(struct work_struct *data)
2678{
2679 struct il_priv *il = container_of(data, struct il_priv, rx_replenish);
2680
2681 mutex_lock(&il->mutex);
2682 if (test_bit(S_EXIT_PENDING, &il->status))
2683 goto out;
2684
2685 il3945_rx_replenish(il);
2686out:
2687 mutex_unlock(&il->mutex);
2688}
2689
2690void
2691il3945_post_associate(struct il_priv *il)
2692{
2693 int rc = 0;
2694
2695 if (!il->vif || !il->is_open)
2696 return;
2697
2698 D_ASSOC("Associated as %d to: %pM\n", il->vif->cfg.aid,
2699 il->active.bssid_addr);
2700
2701 if (test_bit(S_EXIT_PENDING, &il->status))
2702 return;
2703
2704 il_scan_cancel_timeout(il, 200);
2705
2706 il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2707 il3945_commit_rxon(il);
2708
2709 rc = il_send_rxon_timing(il);
2710 if (rc)
2711 IL_WARN("C_RXON_TIMING failed - " "Attempting to continue.\n");
2712
2713 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2714
2715 il->staging.assoc_id = cpu_to_le16(il->vif->cfg.aid);
2716
2717 D_ASSOC("assoc id %d beacon interval %d\n", il->vif->cfg.aid,
2718 il->vif->bss_conf.beacon_int);
2719
2720 if (il->vif->bss_conf.use_short_preamble)
2721 il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2722 else
2723 il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2724
2725 if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
2726 if (il->vif->bss_conf.use_short_slot)
2727 il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
2728 else
2729 il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2730 }
2731
2732 il3945_commit_rxon(il);
2733
2734 switch (il->vif->type) {
2735 case NL80211_IFTYPE_STATION:
2736 il3945_rate_scale_init(il->hw, IL_AP_ID);
2737 break;
2738 case NL80211_IFTYPE_ADHOC:
2739 il3945_send_beacon_cmd(il);
2740 break;
2741 default:
2742 IL_ERR("%s Should not be called in %d mode\n", __func__,
2743 il->vif->type);
2744 break;
2745 }
2746}
2747
2748/*****************************************************************************
2749 *
2750 * mac80211 entry point functions
2751 *
2752 *****************************************************************************/
2753
2754#define UCODE_READY_TIMEOUT (2 * HZ)
2755
2756static int
2757il3945_mac_start(struct ieee80211_hw *hw)
2758{
2759 struct il_priv *il = hw->priv;
2760 int ret;
2761
2762 /* we should be verifying the device is ready to be opened */
2763 mutex_lock(&il->mutex);
2764 D_MAC80211("enter\n");
2765
2766 /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
2767 * ucode filename and max sizes are card-specific. */
2768
2769 if (!il->ucode_code.len) {
2770 ret = il3945_read_ucode(il);
2771 if (ret) {
2772 IL_ERR("Could not read microcode: %d\n", ret);
2773 mutex_unlock(&il->mutex);
2774 goto out_release_irq;
2775 }
2776 }
2777
2778 ret = __il3945_up(il);
2779
2780 mutex_unlock(&il->mutex);
2781
2782 if (ret)
2783 goto out_release_irq;
2784
2785 D_INFO("Start UP work.\n");
2786
2787 /* Wait for START_ALIVE from ucode. Otherwise callbacks from
2788 * mac80211 will not be run successfully. */
2789 ret = wait_event_timeout(il->wait_command_queue,
2790 test_bit(S_READY, &il->status),
2791 UCODE_READY_TIMEOUT);
2792 if (!ret) {
2793 if (!test_bit(S_READY, &il->status)) {
2794 IL_ERR("Wait for START_ALIVE timeout after %dms.\n",
2795 jiffies_to_msecs(UCODE_READY_TIMEOUT));
2796 ret = -ETIMEDOUT;
2797 goto out_release_irq;
2798 }
2799 }
2800
2801 /* ucode is running and will send rfkill notifications,
2802 * no need to poll the killswitch state anymore */
2803 cancel_delayed_work(&il->_3945.rfkill_poll);
2804
2805 il->is_open = 1;
2806 D_MAC80211("leave\n");
2807 return 0;
2808
2809out_release_irq:
2810 il->is_open = 0;
2811 D_MAC80211("leave - failed\n");
2812 return ret;
2813}
2814
2815static void
2816il3945_mac_stop(struct ieee80211_hw *hw)
2817{
2818 struct il_priv *il = hw->priv;
2819
2820 D_MAC80211("enter\n");
2821
2822 if (!il->is_open) {
2823 D_MAC80211("leave - skip\n");
2824 return;
2825 }
2826
2827 il->is_open = 0;
2828
2829 il3945_down(il);
2830
2831 flush_workqueue(il->workqueue);
2832
2833 /* start polling the killswitch state again */
2834 queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
2835 round_jiffies_relative(2 * HZ));
2836
2837 D_MAC80211("leave\n");
2838}
2839
2840static void
2841il3945_mac_tx(struct ieee80211_hw *hw,
2842 struct ieee80211_tx_control *control,
2843 struct sk_buff *skb)
2844{
2845 struct il_priv *il = hw->priv;
2846
2847 D_MAC80211("enter\n");
2848
2849 D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
2850 ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
2851
2852 if (il3945_tx_skb(il, control->sta, skb))
2853 dev_kfree_skb_any(skb);
2854
2855 D_MAC80211("leave\n");
2856}
2857
2858void
2859il3945_config_ap(struct il_priv *il)
2860{
2861 struct ieee80211_vif *vif = il->vif;
2862 int rc = 0;
2863
2864 if (test_bit(S_EXIT_PENDING, &il->status))
2865 return;
2866
2867 /* The following should be done only at AP bring up */
2868 if (!(il_is_associated(il))) {
2869
2870 /* RXON - unassoc (to set timing command) */
2871 il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2872 il3945_commit_rxon(il);
2873
2874 /* RXON Timing */
2875 rc = il_send_rxon_timing(il);
2876 if (rc)
2877 IL_WARN("C_RXON_TIMING failed - "
2878 "Attempting to continue.\n");
2879
2880 il->staging.assoc_id = 0;
2881
2882 if (vif->bss_conf.use_short_preamble)
2883 il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2884 else
2885 il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2886
2887 if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
2888 if (vif->bss_conf.use_short_slot)
2889 il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
2890 else
2891 il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2892 }
2893 /* restore RXON assoc */
2894 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2895 il3945_commit_rxon(il);
2896 }
2897 il3945_send_beacon_cmd(il);
2898}
2899
2900static int
2901il3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2902 struct ieee80211_vif *vif, struct ieee80211_sta *sta,
2903 struct ieee80211_key_conf *key)
2904{
2905 struct il_priv *il = hw->priv;
2906 int ret = 0;
2907 u8 sta_id = IL_INVALID_STATION;
2908 u8 static_key;
2909
2910 D_MAC80211("enter\n");
2911
2912 if (il3945_mod_params.sw_crypto) {
2913 D_MAC80211("leave - hwcrypto disabled\n");
2914 return -EOPNOTSUPP;
2915 }
2916
2917 /*
2918 * To support IBSS RSN, don't program group keys in IBSS, the
2919 * hardware will then not attempt to decrypt the frames.
2920 */
2921 if (vif->type == NL80211_IFTYPE_ADHOC &&
2922 !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
2923 D_MAC80211("leave - IBSS RSN\n");
2924 return -EOPNOTSUPP;
2925 }
2926
2927 static_key = !il_is_associated(il);
2928
2929 if (!static_key) {
2930 sta_id = il_sta_id_or_broadcast(il, sta);
2931 if (sta_id == IL_INVALID_STATION) {
2932 D_MAC80211("leave - station not found\n");
2933 return -EINVAL;
2934 }
2935 }
2936
2937 mutex_lock(&il->mutex);
2938 il_scan_cancel_timeout(il, 100);
2939
2940 switch (cmd) {
2941 case SET_KEY:
2942 if (static_key)
2943 ret = il3945_set_static_key(il, key);
2944 else
2945 ret = il3945_set_dynamic_key(il, key, sta_id);
2946 D_MAC80211("enable hwcrypto key\n");
2947 break;
2948 case DISABLE_KEY:
2949 if (static_key)
2950 ret = il3945_remove_static_key(il);
2951 else
2952 ret = il3945_clear_sta_key_info(il, sta_id);
2953 D_MAC80211("disable hwcrypto key\n");
2954 break;
2955 default:
2956 ret = -EINVAL;
2957 }
2958
2959 D_MAC80211("leave ret %d\n", ret);
2960 mutex_unlock(&il->mutex);
2961
2962 return ret;
2963}
2964
2965static int
2966il3945_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
2967 struct ieee80211_sta *sta)
2968{
2969 struct il_priv *il = hw->priv;
2970 struct il3945_sta_priv *sta_priv = (void *)sta->drv_priv;
2971 int ret;
2972 bool is_ap = vif->type == NL80211_IFTYPE_STATION;
2973 u8 sta_id;
2974
2975 mutex_lock(&il->mutex);
2976 D_INFO("station %pM\n", sta->addr);
2977 sta_priv->common.sta_id = IL_INVALID_STATION;
2978
2979 ret = il_add_station_common(il, sta->addr, is_ap, sta, &sta_id);
2980 if (ret) {
2981 IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret);
2982 /* Should we return success if return code is EEXIST ? */
2983 mutex_unlock(&il->mutex);
2984 return ret;
2985 }
2986
2987 sta_priv->common.sta_id = sta_id;
2988
2989 /* Initialize rate scaling */
2990 D_INFO("Initializing rate scaling for station %pM\n", sta->addr);
2991 il3945_rs_rate_init(il, sta, sta_id);
2992 mutex_unlock(&il->mutex);
2993
2994 return 0;
2995}
2996
2997static void
2998il3945_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
2999 unsigned int *total_flags, u64 multicast)
3000{
3001 struct il_priv *il = hw->priv;
3002 __le32 filter_or = 0, filter_nand = 0;
3003
3004#define CHK(test, flag) do { \
3005 if (*total_flags & (test)) \
3006 filter_or |= (flag); \
3007 else \
3008 filter_nand |= (flag); \
3009 } while (0)
3010
3011 D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags,
3012 *total_flags);
3013
3014 CHK(FIF_OTHER_BSS, RXON_FILTER_PROMISC_MSK);
3015 CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
3016 CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
3017
3018#undef CHK
3019
3020 mutex_lock(&il->mutex);
3021
3022 il->staging.filter_flags &= ~filter_nand;
3023 il->staging.filter_flags |= filter_or;
3024
3025 /*
3026 * Not committing directly because hardware can perform a scan,
3027 * but even if hw is ready, committing here breaks for some reason,
3028 * we'll eventually commit the filter flags change anyway.
3029 */
3030
3031 mutex_unlock(&il->mutex);
3032
3033 /*
3034 * Receiving all multicast frames is always enabled by the
3035 * default flags setup in il_connection_init_rx_config()
3036 * since we currently do not support programming multicast
3037 * filters into the device.
3038 */
3039 *total_flags &=
3040 FIF_OTHER_BSS | FIF_ALLMULTI |
3041 FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
3042}
3043
3044/*****************************************************************************
3045 *
3046 * sysfs attributes
3047 *
3048 *****************************************************************************/
3049
3050#ifdef CONFIG_IWLEGACY_DEBUG
3051
3052/*
3053 * The following adds a new attribute to the sysfs representation
3054 * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
3055 * used for controlling the debug level.
3056 *
3057 * See the level definitions in iwl for details.
3058 *
3059 * The debug_level being managed using sysfs below is a per device debug
3060 * level that is used instead of the global debug level if it (the per
3061 * device debug level) is set.
3062 */
3063static ssize_t
3064il3945_show_debug_level(struct device *d, struct device_attribute *attr,
3065 char *buf)
3066{
3067 struct il_priv *il = dev_get_drvdata(d);
3068 return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
3069}
3070
3071static ssize_t
3072il3945_store_debug_level(struct device *d, struct device_attribute *attr,
3073 const char *buf, size_t count)
3074{
3075 struct il_priv *il = dev_get_drvdata(d);
3076 unsigned long val;
3077 int ret;
3078
3079 ret = kstrtoul(buf, 0, &val);
3080 if (ret)
3081 IL_INFO("%s is not in hex or decimal form.\n", buf);
3082 else
3083 il->debug_level = val;
3084
3085 return strnlen(buf, count);
3086}
3087
3088static DEVICE_ATTR(debug_level, 0644, il3945_show_debug_level,
3089 il3945_store_debug_level);
3090
3091#endif /* CONFIG_IWLEGACY_DEBUG */
3092
3093static ssize_t
3094il3945_show_temperature(struct device *d, struct device_attribute *attr,
3095 char *buf)
3096{
3097 struct il_priv *il = dev_get_drvdata(d);
3098
3099 if (!il_is_alive(il))
3100 return -EAGAIN;
3101
3102 return sprintf(buf, "%d\n", il3945_hw_get_temperature(il));
3103}
3104
3105static DEVICE_ATTR(temperature, 0444, il3945_show_temperature, NULL);
3106
3107static ssize_t
3108il3945_show_tx_power(struct device *d, struct device_attribute *attr, char *buf)
3109{
3110 struct il_priv *il = dev_get_drvdata(d);
3111 return sprintf(buf, "%d\n", il->tx_power_user_lmt);
3112}
3113
3114static ssize_t
3115il3945_store_tx_power(struct device *d, struct device_attribute *attr,
3116 const char *buf, size_t count)
3117{
3118 struct il_priv *il = dev_get_drvdata(d);
3119 char *p = (char *)buf;
3120 u32 val;
3121
3122 val = simple_strtoul(p, &p, 10);
3123 if (p == buf)
3124 IL_INFO(": %s is not in decimal form.\n", buf);
3125 else
3126 il3945_hw_reg_set_txpower(il, val);
3127
3128 return count;
3129}
3130
3131static DEVICE_ATTR(tx_power, 0644, il3945_show_tx_power, il3945_store_tx_power);
3132
3133static ssize_t
3134il3945_show_flags(struct device *d, struct device_attribute *attr, char *buf)
3135{
3136 struct il_priv *il = dev_get_drvdata(d);
3137
3138 return sprintf(buf, "0x%04X\n", il->active.flags);
3139}
3140
3141static ssize_t
3142il3945_store_flags(struct device *d, struct device_attribute *attr,
3143 const char *buf, size_t count)
3144{
3145 struct il_priv *il = dev_get_drvdata(d);
3146 u32 flags = simple_strtoul(buf, NULL, 0);
3147
3148 mutex_lock(&il->mutex);
3149 if (le32_to_cpu(il->staging.flags) != flags) {
3150 /* Cancel any currently running scans... */
3151 if (il_scan_cancel_timeout(il, 100))
3152 IL_WARN("Could not cancel scan.\n");
3153 else {
3154 D_INFO("Committing rxon.flags = 0x%04X\n", flags);
3155 il->staging.flags = cpu_to_le32(flags);
3156 il3945_commit_rxon(il);
3157 }
3158 }
3159 mutex_unlock(&il->mutex);
3160
3161 return count;
3162}
3163
3164static DEVICE_ATTR(flags, 0644, il3945_show_flags, il3945_store_flags);
3165
3166static ssize_t
3167il3945_show_filter_flags(struct device *d, struct device_attribute *attr,
3168 char *buf)
3169{
3170 struct il_priv *il = dev_get_drvdata(d);
3171
3172 return sprintf(buf, "0x%04X\n", le32_to_cpu(il->active.filter_flags));
3173}
3174
3175static ssize_t
3176il3945_store_filter_flags(struct device *d, struct device_attribute *attr,
3177 const char *buf, size_t count)
3178{
3179 struct il_priv *il = dev_get_drvdata(d);
3180 u32 filter_flags = simple_strtoul(buf, NULL, 0);
3181
3182 mutex_lock(&il->mutex);
3183 if (le32_to_cpu(il->staging.filter_flags) != filter_flags) {
3184 /* Cancel any currently running scans... */
3185 if (il_scan_cancel_timeout(il, 100))
3186 IL_WARN("Could not cancel scan.\n");
3187 else {
3188 D_INFO("Committing rxon.filter_flags = " "0x%04X\n",
3189 filter_flags);
3190 il->staging.filter_flags = cpu_to_le32(filter_flags);
3191 il3945_commit_rxon(il);
3192 }
3193 }
3194 mutex_unlock(&il->mutex);
3195
3196 return count;
3197}
3198
3199static DEVICE_ATTR(filter_flags, 0644, il3945_show_filter_flags,
3200 il3945_store_filter_flags);
3201
3202static ssize_t
3203il3945_show_measurement(struct device *d, struct device_attribute *attr,
3204 char *buf)
3205{
3206 struct il_priv *il = dev_get_drvdata(d);
3207 struct il_spectrum_notification measure_report;
3208 u32 size = sizeof(measure_report), len = 0, ofs = 0;
3209 u8 *data = (u8 *) &measure_report;
3210 unsigned long flags;
3211
3212 spin_lock_irqsave(&il->lock, flags);
3213 if (!(il->measurement_status & MEASUREMENT_READY)) {
3214 spin_unlock_irqrestore(&il->lock, flags);
3215 return 0;
3216 }
3217 memcpy(&measure_report, &il->measure_report, size);
3218 il->measurement_status = 0;
3219 spin_unlock_irqrestore(&il->lock, flags);
3220
3221 while (size && PAGE_SIZE - len) {
3222 hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
3223 PAGE_SIZE - len, true);
3224 len = strlen(buf);
3225 if (PAGE_SIZE - len)
3226 buf[len++] = '\n';
3227
3228 ofs += 16;
3229 size -= min(size, 16U);
3230 }
3231
3232 return len;
3233}
3234
3235static ssize_t
3236il3945_store_measurement(struct device *d, struct device_attribute *attr,
3237 const char *buf, size_t count)
3238{
3239 struct il_priv *il = dev_get_drvdata(d);
3240 struct ieee80211_measurement_params params = {
3241 .channel = le16_to_cpu(il->active.channel),
3242 .start_time = cpu_to_le64(il->_3945.last_tsf),
3243 .duration = cpu_to_le16(1),
3244 };
3245 u8 type = IL_MEASURE_BASIC;
3246 u8 buffer[32];
3247 u8 channel;
3248
3249 if (count) {
3250 char *p = buffer;
3251 strscpy(buffer, buf, sizeof(buffer));
3252 channel = simple_strtoul(p, NULL, 0);
3253 if (channel)
3254 params.channel = channel;
3255
3256 p = buffer;
3257 while (*p && *p != ' ')
3258 p++;
3259 if (*p)
3260 type = simple_strtoul(p + 1, NULL, 0);
3261 }
3262
3263 D_INFO("Invoking measurement of type %d on " "channel %d (for '%s')\n",
3264 type, params.channel, buf);
3265 il3945_get_measurement(il, ¶ms, type);
3266
3267 return count;
3268}
3269
3270static DEVICE_ATTR(measurement, 0600, il3945_show_measurement,
3271 il3945_store_measurement);
3272
3273static ssize_t
3274il3945_store_retry_rate(struct device *d, struct device_attribute *attr,
3275 const char *buf, size_t count)
3276{
3277 struct il_priv *il = dev_get_drvdata(d);
3278
3279 il->retry_rate = simple_strtoul(buf, NULL, 0);
3280 if (il->retry_rate <= 0)
3281 il->retry_rate = 1;
3282
3283 return count;
3284}
3285
3286static ssize_t
3287il3945_show_retry_rate(struct device *d, struct device_attribute *attr,
3288 char *buf)
3289{
3290 struct il_priv *il = dev_get_drvdata(d);
3291 return sprintf(buf, "%d", il->retry_rate);
3292}
3293
3294static DEVICE_ATTR(retry_rate, 0600, il3945_show_retry_rate,
3295 il3945_store_retry_rate);
3296
3297static ssize_t
3298il3945_show_channels(struct device *d, struct device_attribute *attr, char *buf)
3299{
3300 /* all this shit doesn't belong into sysfs anyway */
3301 return 0;
3302}
3303
3304static DEVICE_ATTR(channels, 0400, il3945_show_channels, NULL);
3305
3306static ssize_t
3307il3945_show_antenna(struct device *d, struct device_attribute *attr, char *buf)
3308{
3309 struct il_priv *il = dev_get_drvdata(d);
3310
3311 if (!il_is_alive(il))
3312 return -EAGAIN;
3313
3314 return sprintf(buf, "%d\n", il3945_mod_params.antenna);
3315}
3316
3317static ssize_t
3318il3945_store_antenna(struct device *d, struct device_attribute *attr,
3319 const char *buf, size_t count)
3320{
3321 struct il_priv *il __maybe_unused = dev_get_drvdata(d);
3322 int ant;
3323
3324 if (count == 0)
3325 return 0;
3326
3327 if (sscanf(buf, "%1i", &ant) != 1) {
3328 D_INFO("not in hex or decimal form.\n");
3329 return count;
3330 }
3331
3332 if (ant >= 0 && ant <= 2) {
3333 D_INFO("Setting antenna select to %d.\n", ant);
3334 il3945_mod_params.antenna = (enum il3945_antenna)ant;
3335 } else
3336 D_INFO("Bad antenna select value %d.\n", ant);
3337
3338 return count;
3339}
3340
3341static DEVICE_ATTR(antenna, 0644, il3945_show_antenna, il3945_store_antenna);
3342
3343static ssize_t
3344il3945_show_status(struct device *d, struct device_attribute *attr, char *buf)
3345{
3346 struct il_priv *il = dev_get_drvdata(d);
3347 if (!il_is_alive(il))
3348 return -EAGAIN;
3349 return sprintf(buf, "0x%08x\n", (int)il->status);
3350}
3351
3352static DEVICE_ATTR(status, 0444, il3945_show_status, NULL);
3353
3354static ssize_t
3355il3945_dump_error_log(struct device *d, struct device_attribute *attr,
3356 const char *buf, size_t count)
3357{
3358 struct il_priv *il = dev_get_drvdata(d);
3359 char *p = (char *)buf;
3360
3361 if (p[0] == '1')
3362 il3945_dump_nic_error_log(il);
3363
3364 return strnlen(buf, count);
3365}
3366
3367static DEVICE_ATTR(dump_errors, 0200, NULL, il3945_dump_error_log);
3368
3369/*****************************************************************************
3370 *
3371 * driver setup and tear down
3372 *
3373 *****************************************************************************/
3374
3375static int
3376il3945_setup_deferred_work(struct il_priv *il)
3377{
3378 il->workqueue = create_singlethread_workqueue(DRV_NAME);
3379 if (!il->workqueue)
3380 return -ENOMEM;
3381
3382 init_waitqueue_head(&il->wait_command_queue);
3383
3384 INIT_WORK(&il->restart, il3945_bg_restart);
3385 INIT_WORK(&il->rx_replenish, il3945_bg_rx_replenish);
3386 INIT_DELAYED_WORK(&il->init_alive_start, il3945_bg_init_alive_start);
3387 INIT_DELAYED_WORK(&il->alive_start, il3945_bg_alive_start);
3388 INIT_DELAYED_WORK(&il->_3945.rfkill_poll, il3945_rfkill_poll);
3389
3390 il_setup_scan_deferred_work(il);
3391
3392 il3945_hw_setup_deferred_work(il);
3393
3394 timer_setup(&il->watchdog, il_bg_watchdog, 0);
3395
3396 tasklet_setup(&il->irq_tasklet, il3945_irq_tasklet);
3397
3398 return 0;
3399}
3400
3401static void
3402il3945_cancel_deferred_work(struct il_priv *il)
3403{
3404 il3945_hw_cancel_deferred_work(il);
3405
3406 cancel_delayed_work_sync(&il->init_alive_start);
3407 cancel_delayed_work(&il->alive_start);
3408
3409 il_cancel_scan_deferred_work(il);
3410}
3411
3412static struct attribute *il3945_sysfs_entries[] = {
3413 &dev_attr_antenna.attr,
3414 &dev_attr_channels.attr,
3415 &dev_attr_dump_errors.attr,
3416 &dev_attr_flags.attr,
3417 &dev_attr_filter_flags.attr,
3418 &dev_attr_measurement.attr,
3419 &dev_attr_retry_rate.attr,
3420 &dev_attr_status.attr,
3421 &dev_attr_temperature.attr,
3422 &dev_attr_tx_power.attr,
3423#ifdef CONFIG_IWLEGACY_DEBUG
3424 &dev_attr_debug_level.attr,
3425#endif
3426 NULL
3427};
3428
3429static const struct attribute_group il3945_attribute_group = {
3430 .name = NULL, /* put in device directory */
3431 .attrs = il3945_sysfs_entries,
3432};
3433
3434static struct ieee80211_ops il3945_mac_ops __ro_after_init = {
3435 .tx = il3945_mac_tx,
3436 .wake_tx_queue = ieee80211_handle_wake_tx_queue,
3437 .start = il3945_mac_start,
3438 .stop = il3945_mac_stop,
3439 .add_interface = il_mac_add_interface,
3440 .remove_interface = il_mac_remove_interface,
3441 .change_interface = il_mac_change_interface,
3442 .config = il_mac_config,
3443 .configure_filter = il3945_configure_filter,
3444 .set_key = il3945_mac_set_key,
3445 .conf_tx = il_mac_conf_tx,
3446 .reset_tsf = il_mac_reset_tsf,
3447 .bss_info_changed = il_mac_bss_info_changed,
3448 .hw_scan = il_mac_hw_scan,
3449 .sta_add = il3945_mac_sta_add,
3450 .sta_remove = il_mac_sta_remove,
3451 .tx_last_beacon = il_mac_tx_last_beacon,
3452 .flush = il_mac_flush,
3453};
3454
3455static int
3456il3945_init_drv(struct il_priv *il)
3457{
3458 int ret;
3459 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
3460
3461 il->retry_rate = 1;
3462 il->beacon_skb = NULL;
3463
3464 spin_lock_init(&il->sta_lock);
3465 spin_lock_init(&il->hcmd_lock);
3466
3467 INIT_LIST_HEAD(&il->free_frames);
3468
3469 mutex_init(&il->mutex);
3470
3471 il->ieee_channels = NULL;
3472 il->ieee_rates = NULL;
3473 il->band = NL80211_BAND_2GHZ;
3474
3475 il->iw_mode = NL80211_IFTYPE_STATION;
3476 il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;
3477
3478 /* initialize force reset */
3479 il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;
3480
3481 if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
3482 IL_WARN("Unsupported EEPROM version: 0x%04X\n",
3483 eeprom->version);
3484 ret = -EINVAL;
3485 goto err;
3486 }
3487 ret = il_init_channel_map(il);
3488 if (ret) {
3489 IL_ERR("initializing regulatory failed: %d\n", ret);
3490 goto err;
3491 }
3492
3493 /* Set up txpower settings in driver for all channels */
3494 if (il3945_txpower_set_from_eeprom(il)) {
3495 ret = -EIO;
3496 goto err_free_channel_map;
3497 }
3498
3499 ret = il_init_geos(il);
3500 if (ret) {
3501 IL_ERR("initializing geos failed: %d\n", ret);
3502 goto err_free_channel_map;
3503 }
3504 il3945_init_hw_rates(il, il->ieee_rates);
3505
3506 return 0;
3507
3508err_free_channel_map:
3509 il_free_channel_map(il);
3510err:
3511 return ret;
3512}
3513
3514#define IL3945_MAX_PROBE_REQUEST 200
3515
3516static int
3517il3945_setup_mac(struct il_priv *il)
3518{
3519 int ret;
3520 struct ieee80211_hw *hw = il->hw;
3521
3522 hw->rate_control_algorithm = "iwl-3945-rs";
3523 hw->sta_data_size = sizeof(struct il3945_sta_priv);
3524 hw->vif_data_size = sizeof(struct il_vif_priv);
3525
3526 /* Tell mac80211 our characteristics */
3527 ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS);
3528 ieee80211_hw_set(hw, SUPPORTS_PS);
3529 ieee80211_hw_set(hw, SIGNAL_DBM);
3530 ieee80211_hw_set(hw, SPECTRUM_MGMT);
3531
3532 hw->wiphy->interface_modes =
3533 BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
3534
3535 hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
3536 hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
3537 REGULATORY_DISABLE_BEACON_HINTS;
3538
3539 hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
3540
3541 hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
3542 /* we create the 802.11 header and a zero-length SSID element */
3543 hw->wiphy->max_scan_ie_len = IL3945_MAX_PROBE_REQUEST - 24 - 2;
3544
3545 /* Default value; 4 EDCA QOS priorities */
3546 hw->queues = 4;
3547
3548 if (il->bands[NL80211_BAND_2GHZ].n_channels)
3549 il->hw->wiphy->bands[NL80211_BAND_2GHZ] =
3550 &il->bands[NL80211_BAND_2GHZ];
3551
3552 if (il->bands[NL80211_BAND_5GHZ].n_channels)
3553 il->hw->wiphy->bands[NL80211_BAND_5GHZ] =
3554 &il->bands[NL80211_BAND_5GHZ];
3555
3556 il_leds_init(il);
3557
3558 wiphy_ext_feature_set(il->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
3559
3560 ret = ieee80211_register_hw(il->hw);
3561 if (ret) {
3562 IL_ERR("Failed to register hw (error %d)\n", ret);
3563 return ret;
3564 }
3565 il->mac80211_registered = 1;
3566
3567 return 0;
3568}
3569
3570static int
3571il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3572{
3573 int err = 0;
3574 struct il_priv *il;
3575 struct ieee80211_hw *hw;
3576 struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
3577 struct il3945_eeprom *eeprom;
3578 unsigned long flags;
3579
3580 /***********************
3581 * 1. Allocating HW data
3582 * ********************/
3583
3584 hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il3945_mac_ops);
3585 if (!hw) {
3586 err = -ENOMEM;
3587 goto out;
3588 }
3589 il = hw->priv;
3590 il->hw = hw;
3591 SET_IEEE80211_DEV(hw, &pdev->dev);
3592
3593 il->cmd_queue = IL39_CMD_QUEUE_NUM;
3594
3595 D_INFO("*** LOAD DRIVER ***\n");
3596 il->cfg = cfg;
3597 il->ops = &il3945_ops;
3598#ifdef CONFIG_IWLEGACY_DEBUGFS
3599 il->debugfs_ops = &il3945_debugfs_ops;
3600#endif
3601 il->pci_dev = pdev;
3602 il->inta_mask = CSR_INI_SET_MASK;
3603
3604 /***************************
3605 * 2. Initializing PCI bus
3606 * *************************/
3607 pci_disable_link_state(pdev,
3608 PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
3609 PCIE_LINK_STATE_CLKPM);
3610
3611 if (pci_enable_device(pdev)) {
3612 err = -ENODEV;
3613 goto out_ieee80211_free_hw;
3614 }
3615
3616 pci_set_master(pdev);
3617
3618 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
3619 if (err) {
3620 IL_WARN("No suitable DMA available.\n");
3621 goto out_pci_disable_device;
3622 }
3623
3624 pci_set_drvdata(pdev, il);
3625 err = pci_request_regions(pdev, DRV_NAME);
3626 if (err)
3627 goto out_pci_disable_device;
3628
3629 /***********************
3630 * 3. Read REV Register
3631 * ********************/
3632 il->hw_base = pci_ioremap_bar(pdev, 0);
3633 if (!il->hw_base) {
3634 err = -ENODEV;
3635 goto out_pci_release_regions;
3636 }
3637
3638 D_INFO("pci_resource_len = 0x%08llx\n",
3639 (unsigned long long)pci_resource_len(pdev, 0));
3640 D_INFO("pci_resource_base = %p\n", il->hw_base);
3641
3642 /* We disable the RETRY_TIMEOUT register (0x41) to keep
3643 * PCI Tx retries from interfering with C3 CPU state */
3644 pci_write_config_byte(pdev, 0x41, 0x00);
3645
3646 /* these spin locks will be used in apm_init and EEPROM access
3647 * we should init now
3648 */
3649 spin_lock_init(&il->reg_lock);
3650 spin_lock_init(&il->lock);
3651
3652 /*
3653 * stop and reset the on-board processor just in case it is in a
3654 * strange state ... like being left stranded by a primary kernel
3655 * and this is now the kdump kernel trying to start up
3656 */
3657 _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
3658
3659 /***********************
3660 * 4. Read EEPROM
3661 * ********************/
3662
3663 /* Read the EEPROM */
3664 err = il_eeprom_init(il);
3665 if (err) {
3666 IL_ERR("Unable to init EEPROM\n");
3667 goto out_iounmap;
3668 }
3669 /* MAC Address location in EEPROM same for 3945/4965 */
3670 eeprom = (struct il3945_eeprom *)il->eeprom;
3671 D_INFO("MAC address: %pM\n", eeprom->mac_address);
3672 SET_IEEE80211_PERM_ADDR(il->hw, eeprom->mac_address);
3673
3674 /***********************
3675 * 5. Setup HW Constants
3676 * ********************/
3677 /* Device-specific setup */
3678 err = il3945_hw_set_hw_params(il);
3679 if (err) {
3680 IL_ERR("failed to set hw settings\n");
3681 goto out_eeprom_free;
3682 }
3683
3684 /***********************
3685 * 6. Setup il
3686 * ********************/
3687
3688 err = il3945_init_drv(il);
3689 if (err) {
3690 IL_ERR("initializing driver failed\n");
3691 goto out_unset_hw_params;
3692 }
3693
3694 IL_INFO("Detected Intel Wireless WiFi Link %s\n", il->cfg->name);
3695
3696 /***********************
3697 * 7. Setup Services
3698 * ********************/
3699
3700 spin_lock_irqsave(&il->lock, flags);
3701 il_disable_interrupts(il);
3702 spin_unlock_irqrestore(&il->lock, flags);
3703
3704 pci_enable_msi(il->pci_dev);
3705
3706 err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il);
3707 if (err) {
3708 IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
3709 goto out_disable_msi;
3710 }
3711
3712 err = sysfs_create_group(&pdev->dev.kobj, &il3945_attribute_group);
3713 if (err) {
3714 IL_ERR("failed to create sysfs device attributes\n");
3715 goto out_release_irq;
3716 }
3717
3718 il_set_rxon_channel(il, &il->bands[NL80211_BAND_2GHZ].channels[5]);
3719 err = il3945_setup_deferred_work(il);
3720 if (err)
3721 goto out_remove_sysfs;
3722
3723 il3945_setup_handlers(il);
3724 il_power_initialize(il);
3725
3726 /*********************************
3727 * 8. Setup and Register mac80211
3728 * *******************************/
3729
3730 il_enable_interrupts(il);
3731
3732 err = il3945_setup_mac(il);
3733 if (err)
3734 goto out_destroy_workqueue;
3735
3736 il_dbgfs_register(il, DRV_NAME);
3737
3738 /* Start monitoring the killswitch */
3739 queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll, 2 * HZ);
3740
3741 return 0;
3742
3743out_destroy_workqueue:
3744 destroy_workqueue(il->workqueue);
3745 il->workqueue = NULL;
3746out_remove_sysfs:
3747 sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
3748out_release_irq:
3749 free_irq(il->pci_dev->irq, il);
3750out_disable_msi:
3751 pci_disable_msi(il->pci_dev);
3752 il_free_geos(il);
3753 il_free_channel_map(il);
3754out_unset_hw_params:
3755 il3945_unset_hw_params(il);
3756out_eeprom_free:
3757 il_eeprom_free(il);
3758out_iounmap:
3759 iounmap(il->hw_base);
3760out_pci_release_regions:
3761 pci_release_regions(pdev);
3762out_pci_disable_device:
3763 pci_disable_device(pdev);
3764out_ieee80211_free_hw:
3765 ieee80211_free_hw(il->hw);
3766out:
3767 return err;
3768}
3769
3770static void
3771il3945_pci_remove(struct pci_dev *pdev)
3772{
3773 struct il_priv *il = pci_get_drvdata(pdev);
3774 unsigned long flags;
3775
3776 if (!il)
3777 return;
3778
3779 D_INFO("*** UNLOAD DRIVER ***\n");
3780
3781 il_dbgfs_unregister(il);
3782
3783 set_bit(S_EXIT_PENDING, &il->status);
3784
3785 il_leds_exit(il);
3786
3787 if (il->mac80211_registered) {
3788 ieee80211_unregister_hw(il->hw);
3789 il->mac80211_registered = 0;
3790 } else {
3791 il3945_down(il);
3792 }
3793
3794 /*
3795 * Make sure device is reset to low power before unloading driver.
3796 * This may be redundant with il_down(), but there are paths to
3797 * run il_down() without calling apm_ops.stop(), and there are
3798 * paths to avoid running il_down() at all before leaving driver.
3799 * This (inexpensive) call *makes sure* device is reset.
3800 */
3801 il_apm_stop(il);
3802
3803 /* make sure we flush any pending irq or
3804 * tasklet for the driver
3805 */
3806 spin_lock_irqsave(&il->lock, flags);
3807 il_disable_interrupts(il);
3808 spin_unlock_irqrestore(&il->lock, flags);
3809
3810 il3945_synchronize_irq(il);
3811
3812 sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
3813
3814 cancel_delayed_work_sync(&il->_3945.rfkill_poll);
3815
3816 il3945_dealloc_ucode_pci(il);
3817
3818 if (il->rxq.bd)
3819 il3945_rx_queue_free(il, &il->rxq);
3820 il3945_hw_txq_ctx_free(il);
3821
3822 il3945_unset_hw_params(il);
3823
3824 /*netif_stop_queue(dev); */
3825
3826 /* ieee80211_unregister_hw calls il3945_mac_stop, which flushes
3827 * il->workqueue... so we can't take down the workqueue
3828 * until now... */
3829 destroy_workqueue(il->workqueue);
3830 il->workqueue = NULL;
3831
3832 free_irq(pdev->irq, il);
3833 pci_disable_msi(pdev);
3834
3835 iounmap(il->hw_base);
3836 pci_release_regions(pdev);
3837 pci_disable_device(pdev);
3838
3839 il_free_channel_map(il);
3840 il_free_geos(il);
3841 kfree(il->scan_cmd);
3842 dev_kfree_skb(il->beacon_skb);
3843 ieee80211_free_hw(il->hw);
3844}
3845
3846/*****************************************************************************
3847 *
3848 * driver and module entry point
3849 *
3850 *****************************************************************************/
3851
3852static struct pci_driver il3945_driver = {
3853 .name = DRV_NAME,
3854 .id_table = il3945_hw_card_ids,
3855 .probe = il3945_pci_probe,
3856 .remove = il3945_pci_remove,
3857 .driver.pm = IL_LEGACY_PM_OPS,
3858};
3859
3860static int __init
3861il3945_init(void)
3862{
3863
3864 int ret;
3865 pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
3866 pr_info(DRV_COPYRIGHT "\n");
3867
3868 /*
3869 * Disabling hardware scan means that mac80211 will perform scans
3870 * "the hard way", rather than using device's scan.
3871 */
3872 if (il3945_mod_params.disable_hw_scan) {
3873 pr_info("hw_scan is disabled\n");
3874 il3945_mac_ops.hw_scan = NULL;
3875 }
3876
3877 ret = il3945_rate_control_register();
3878 if (ret) {
3879 pr_err("Unable to register rate control algorithm: %d\n", ret);
3880 return ret;
3881 }
3882
3883 ret = pci_register_driver(&il3945_driver);
3884 if (ret) {
3885 pr_err("Unable to initialize PCI module\n");
3886 goto error_register;
3887 }
3888
3889 return ret;
3890
3891error_register:
3892 il3945_rate_control_unregister();
3893 return ret;
3894}
3895
3896static void __exit
3897il3945_exit(void)
3898{
3899 pci_unregister_driver(&il3945_driver);
3900 il3945_rate_control_unregister();
3901}
3902
3903MODULE_FIRMWARE(IL3945_MODULE_FIRMWARE(IL3945_UCODE_API_MAX));
3904
3905module_param_named(antenna, il3945_mod_params.antenna, int, 0444);
3906MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
3907module_param_named(swcrypto, il3945_mod_params.sw_crypto, int, 0444);
3908MODULE_PARM_DESC(swcrypto, "using software crypto (default 1 [software])");
3909module_param_named(disable_hw_scan, il3945_mod_params.disable_hw_scan, int,
3910 0444);
3911MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)");
3912#ifdef CONFIG_IWLEGACY_DEBUG
3913module_param_named(debug, il_debug_level, uint, 0644);
3914MODULE_PARM_DESC(debug, "debug output mask");
3915#endif
3916module_param_named(fw_restart, il3945_mod_params.restart_fw, int, 0444);
3917MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
3918
3919module_exit(il3945_exit);
3920module_init(il3945_init);
1/******************************************************************************
2 *
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
4 *
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * more details.
16 *
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
20 *
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
23 *
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *
28 *****************************************************************************/
29
30#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
31
32#include <linux/kernel.h>
33#include <linux/module.h>
34#include <linux/init.h>
35#include <linux/pci.h>
36#include <linux/pci-aspm.h>
37#include <linux/slab.h>
38#include <linux/dma-mapping.h>
39#include <linux/delay.h>
40#include <linux/sched.h>
41#include <linux/skbuff.h>
42#include <linux/netdevice.h>
43#include <linux/firmware.h>
44#include <linux/etherdevice.h>
45#include <linux/if_arp.h>
46
47#include <net/ieee80211_radiotap.h>
48#include <net/mac80211.h>
49
50#include <asm/div64.h>
51
52#define DRV_NAME "iwl3945"
53
54#include "commands.h"
55#include "common.h"
56#include "3945.h"
57#include "iwl-spectrum.h"
58
59/*
60 * module name, copyright, version, etc.
61 */
62
63#define DRV_DESCRIPTION \
64"Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
65
66#ifdef CONFIG_IWLEGACY_DEBUG
67#define VD "d"
68#else
69#define VD
70#endif
71
72/*
73 * add "s" to indicate spectrum measurement included.
74 * we add it here to be consistent with previous releases in which
75 * this was configurable.
76 */
77#define DRV_VERSION IWLWIFI_VERSION VD "s"
78#define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation"
79#define DRV_AUTHOR "<ilw@linux.intel.com>"
80
81MODULE_DESCRIPTION(DRV_DESCRIPTION);
82MODULE_VERSION(DRV_VERSION);
83MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
84MODULE_LICENSE("GPL");
85
86 /* module parameters */
87struct il_mod_params il3945_mod_params = {
88 .sw_crypto = 1,
89 .restart_fw = 1,
90 .disable_hw_scan = 1,
91 /* the rest are 0 by default */
92};
93
94/**
95 * il3945_get_antenna_flags - Get antenna flags for RXON command
96 * @il: eeprom and antenna fields are used to determine antenna flags
97 *
98 * il->eeprom39 is used to determine if antenna AUX/MAIN are reversed
99 * il3945_mod_params.antenna specifies the antenna diversity mode:
100 *
101 * IL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
102 * IL_ANTENNA_MAIN - Force MAIN antenna
103 * IL_ANTENNA_AUX - Force AUX antenna
104 */
105__le32
106il3945_get_antenna_flags(const struct il_priv *il)
107{
108 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
109
110 switch (il3945_mod_params.antenna) {
111 case IL_ANTENNA_DIVERSITY:
112 return 0;
113
114 case IL_ANTENNA_MAIN:
115 if (eeprom->antenna_switch_type)
116 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
117 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
118
119 case IL_ANTENNA_AUX:
120 if (eeprom->antenna_switch_type)
121 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
122 return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
123 }
124
125 /* bad antenna selector value */
126 IL_ERR("Bad antenna selector value (0x%x)\n",
127 il3945_mod_params.antenna);
128
129 return 0; /* "diversity" is default if error */
130}
131
132static int
133il3945_set_ccmp_dynamic_key_info(struct il_priv *il,
134 struct ieee80211_key_conf *keyconf, u8 sta_id)
135{
136 unsigned long flags;
137 __le16 key_flags = 0;
138 int ret;
139
140 key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
141 key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
142
143 if (sta_id == il->hw_params.bcast_id)
144 key_flags |= STA_KEY_MULTICAST_MSK;
145
146 keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
147 keyconf->hw_key_idx = keyconf->keyidx;
148 key_flags &= ~STA_KEY_FLG_INVALID;
149
150 spin_lock_irqsave(&il->sta_lock, flags);
151 il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
152 il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
153 memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);
154
155 memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen);
156
157 if ((il->stations[sta_id].sta.key.
158 key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
159 il->stations[sta_id].sta.key.key_offset =
160 il_get_free_ucode_key_idx(il);
161 /* else, we are overriding an existing key => no need to allocated room
162 * in uCode. */
163
164 WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
165 "no space for a new key");
166
167 il->stations[sta_id].sta.key.key_flags = key_flags;
168 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
169 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
170
171 D_INFO("hwcrypto: modify ucode station key info\n");
172
173 ret = il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);
174
175 spin_unlock_irqrestore(&il->sta_lock, flags);
176
177 return ret;
178}
179
180static int
181il3945_set_tkip_dynamic_key_info(struct il_priv *il,
182 struct ieee80211_key_conf *keyconf, u8 sta_id)
183{
184 return -EOPNOTSUPP;
185}
186
187static int
188il3945_set_wep_dynamic_key_info(struct il_priv *il,
189 struct ieee80211_key_conf *keyconf, u8 sta_id)
190{
191 return -EOPNOTSUPP;
192}
193
194static int
195il3945_clear_sta_key_info(struct il_priv *il, u8 sta_id)
196{
197 unsigned long flags;
198 struct il_addsta_cmd sta_cmd;
199
200 spin_lock_irqsave(&il->sta_lock, flags);
201 memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key));
202 memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo));
203 il->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
204 il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
205 il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
206 memcpy(&sta_cmd, &il->stations[sta_id].sta,
207 sizeof(struct il_addsta_cmd));
208 spin_unlock_irqrestore(&il->sta_lock, flags);
209
210 D_INFO("hwcrypto: clear ucode station key info\n");
211 return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
212}
213
214static int
215il3945_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
216 u8 sta_id)
217{
218 int ret = 0;
219
220 keyconf->hw_key_idx = HW_KEY_DYNAMIC;
221
222 switch (keyconf->cipher) {
223 case WLAN_CIPHER_SUITE_CCMP:
224 ret = il3945_set_ccmp_dynamic_key_info(il, keyconf, sta_id);
225 break;
226 case WLAN_CIPHER_SUITE_TKIP:
227 ret = il3945_set_tkip_dynamic_key_info(il, keyconf, sta_id);
228 break;
229 case WLAN_CIPHER_SUITE_WEP40:
230 case WLAN_CIPHER_SUITE_WEP104:
231 ret = il3945_set_wep_dynamic_key_info(il, keyconf, sta_id);
232 break;
233 default:
234 IL_ERR("Unknown alg: %s alg=%x\n", __func__, keyconf->cipher);
235 ret = -EINVAL;
236 }
237
238 D_WEP("Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
239 keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret);
240
241 return ret;
242}
243
244static int
245il3945_remove_static_key(struct il_priv *il)
246{
247 int ret = -EOPNOTSUPP;
248
249 return ret;
250}
251
252static int
253il3945_set_static_key(struct il_priv *il, struct ieee80211_key_conf *key)
254{
255 if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
256 key->cipher == WLAN_CIPHER_SUITE_WEP104)
257 return -EOPNOTSUPP;
258
259 IL_ERR("Static key invalid: cipher %x\n", key->cipher);
260 return -EINVAL;
261}
262
263static void
264il3945_clear_free_frames(struct il_priv *il)
265{
266 struct list_head *element;
267
268 D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count);
269
270 while (!list_empty(&il->free_frames)) {
271 element = il->free_frames.next;
272 list_del(element);
273 kfree(list_entry(element, struct il3945_frame, list));
274 il->frames_count--;
275 }
276
277 if (il->frames_count) {
278 IL_WARN("%d frames still in use. Did we lose one?\n",
279 il->frames_count);
280 il->frames_count = 0;
281 }
282}
283
284static struct il3945_frame *
285il3945_get_free_frame(struct il_priv *il)
286{
287 struct il3945_frame *frame;
288 struct list_head *element;
289 if (list_empty(&il->free_frames)) {
290 frame = kzalloc(sizeof(*frame), GFP_KERNEL);
291 if (!frame) {
292 IL_ERR("Could not allocate frame!\n");
293 return NULL;
294 }
295
296 il->frames_count++;
297 return frame;
298 }
299
300 element = il->free_frames.next;
301 list_del(element);
302 return list_entry(element, struct il3945_frame, list);
303}
304
305static void
306il3945_free_frame(struct il_priv *il, struct il3945_frame *frame)
307{
308 memset(frame, 0, sizeof(*frame));
309 list_add(&frame->list, &il->free_frames);
310}
311
312unsigned int
313il3945_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr,
314 int left)
315{
316
317 if (!il_is_associated(il) || !il->beacon_skb)
318 return 0;
319
320 if (il->beacon_skb->len > left)
321 return 0;
322
323 memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);
324
325 return il->beacon_skb->len;
326}
327
328static int
329il3945_send_beacon_cmd(struct il_priv *il)
330{
331 struct il3945_frame *frame;
332 unsigned int frame_size;
333 int rc;
334 u8 rate;
335
336 frame = il3945_get_free_frame(il);
337
338 if (!frame) {
339 IL_ERR("Could not obtain free frame buffer for beacon "
340 "command.\n");
341 return -ENOMEM;
342 }
343
344 rate = il_get_lowest_plcp(il);
345
346 frame_size = il3945_hw_get_beacon_cmd(il, frame, rate);
347
348 rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]);
349
350 il3945_free_frame(il, frame);
351
352 return rc;
353}
354
355static void
356il3945_unset_hw_params(struct il_priv *il)
357{
358 if (il->_3945.shared_virt)
359 dma_free_coherent(&il->pci_dev->dev,
360 sizeof(struct il3945_shared),
361 il->_3945.shared_virt, il->_3945.shared_phys);
362}
363
364static void
365il3945_build_tx_cmd_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info,
366 struct il_device_cmd *cmd,
367 struct sk_buff *skb_frag, int sta_id)
368{
369 struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
370 struct il_hw_key *keyinfo = &il->stations[sta_id].keyinfo;
371
372 tx_cmd->sec_ctl = 0;
373
374 switch (keyinfo->cipher) {
375 case WLAN_CIPHER_SUITE_CCMP:
376 tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
377 memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
378 D_TX("tx_cmd with AES hwcrypto\n");
379 break;
380
381 case WLAN_CIPHER_SUITE_TKIP:
382 break;
383
384 case WLAN_CIPHER_SUITE_WEP104:
385 tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
386 /* fall through */
387 case WLAN_CIPHER_SUITE_WEP40:
388 tx_cmd->sec_ctl |=
389 TX_CMD_SEC_WEP | (info->control.hw_key->
390 hw_key_idx & TX_CMD_SEC_MSK) <<
391 TX_CMD_SEC_SHIFT;
392
393 memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
394
395 D_TX("Configuring packet for WEP encryption " "with key %d\n",
396 info->control.hw_key->hw_key_idx);
397 break;
398
399 default:
400 IL_ERR("Unknown encode cipher %x\n", keyinfo->cipher);
401 break;
402 }
403}
404
405/*
406 * handle build C_TX command notification.
407 */
408static void
409il3945_build_tx_cmd_basic(struct il_priv *il, struct il_device_cmd *cmd,
410 struct ieee80211_tx_info *info,
411 struct ieee80211_hdr *hdr, u8 std_id)
412{
413 struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
414 __le32 tx_flags = tx_cmd->tx_flags;
415 __le16 fc = hdr->frame_control;
416
417 tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
418 if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
419 tx_flags |= TX_CMD_FLG_ACK_MSK;
420 if (ieee80211_is_mgmt(fc))
421 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
422 if (ieee80211_is_probe_resp(fc) &&
423 !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
424 tx_flags |= TX_CMD_FLG_TSF_MSK;
425 } else {
426 tx_flags &= (~TX_CMD_FLG_ACK_MSK);
427 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
428 }
429
430 tx_cmd->sta_id = std_id;
431 if (ieee80211_has_morefrags(fc))
432 tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
433
434 if (ieee80211_is_data_qos(fc)) {
435 u8 *qc = ieee80211_get_qos_ctl(hdr);
436 tx_cmd->tid_tspec = qc[0] & 0xf;
437 tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
438 } else {
439 tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
440 }
441
442 il_tx_cmd_protection(il, info, fc, &tx_flags);
443
444 tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
445 if (ieee80211_is_mgmt(fc)) {
446 if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
447 tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
448 else
449 tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
450 } else {
451 tx_cmd->timeout.pm_frame_timeout = 0;
452 }
453
454 tx_cmd->driver_txop = 0;
455 tx_cmd->tx_flags = tx_flags;
456 tx_cmd->next_frame_len = 0;
457}
458
459/*
460 * start C_TX command process
461 */
462static int
463il3945_tx_skb(struct il_priv *il,
464 struct ieee80211_sta *sta,
465 struct sk_buff *skb)
466{
467 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
468 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
469 struct il3945_tx_cmd *tx_cmd;
470 struct il_tx_queue *txq = NULL;
471 struct il_queue *q = NULL;
472 struct il_device_cmd *out_cmd;
473 struct il_cmd_meta *out_meta;
474 dma_addr_t phys_addr;
475 dma_addr_t txcmd_phys;
476 int txq_id = skb_get_queue_mapping(skb);
477 u16 len, idx, hdr_len;
478 u16 firstlen, secondlen;
479 u8 id;
480 u8 unicast;
481 u8 sta_id;
482 u8 tid = 0;
483 __le16 fc;
484 u8 wait_write_ptr = 0;
485 unsigned long flags;
486
487 spin_lock_irqsave(&il->lock, flags);
488 if (il_is_rfkill(il)) {
489 D_DROP("Dropping - RF KILL\n");
490 goto drop_unlock;
491 }
492
493 if ((ieee80211_get_tx_rate(il->hw, info)->hw_value & 0xFF) ==
494 IL_INVALID_RATE) {
495 IL_ERR("ERROR: No TX rate available.\n");
496 goto drop_unlock;
497 }
498
499 unicast = !is_multicast_ether_addr(hdr->addr1);
500 id = 0;
501
502 fc = hdr->frame_control;
503
504#ifdef CONFIG_IWLEGACY_DEBUG
505 if (ieee80211_is_auth(fc))
506 D_TX("Sending AUTH frame\n");
507 else if (ieee80211_is_assoc_req(fc))
508 D_TX("Sending ASSOC frame\n");
509 else if (ieee80211_is_reassoc_req(fc))
510 D_TX("Sending REASSOC frame\n");
511#endif
512
513 spin_unlock_irqrestore(&il->lock, flags);
514
515 hdr_len = ieee80211_hdrlen(fc);
516
517 /* Find idx into station table for destination station */
518 sta_id = il_sta_id_or_broadcast(il, sta);
519 if (sta_id == IL_INVALID_STATION) {
520 D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1);
521 goto drop;
522 }
523
524 D_RATE("station Id %d\n", sta_id);
525
526 if (ieee80211_is_data_qos(fc)) {
527 u8 *qc = ieee80211_get_qos_ctl(hdr);
528 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
529 if (unlikely(tid >= MAX_TID_COUNT))
530 goto drop;
531 }
532
533 /* Descriptor for chosen Tx queue */
534 txq = &il->txq[txq_id];
535 q = &txq->q;
536
537 if ((il_queue_space(q) < q->high_mark))
538 goto drop;
539
540 spin_lock_irqsave(&il->lock, flags);
541
542 idx = il_get_cmd_idx(q, q->write_ptr, 0);
543
544 txq->skbs[q->write_ptr] = skb;
545
546 /* Init first empty entry in queue's array of Tx/cmd buffers */
547 out_cmd = txq->cmd[idx];
548 out_meta = &txq->meta[idx];
549 tx_cmd = (struct il3945_tx_cmd *)out_cmd->cmd.payload;
550 memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
551 memset(tx_cmd, 0, sizeof(*tx_cmd));
552
553 /*
554 * Set up the Tx-command (not MAC!) header.
555 * Store the chosen Tx queue and TFD idx within the sequence field;
556 * after Tx, uCode's Tx response will return this value so driver can
557 * locate the frame within the tx queue and do post-tx processing.
558 */
559 out_cmd->hdr.cmd = C_TX;
560 out_cmd->hdr.sequence =
561 cpu_to_le16((u16)
562 (QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr)));
563
564 /* Copy MAC header from skb into command buffer */
565 memcpy(tx_cmd->hdr, hdr, hdr_len);
566
567 if (info->control.hw_key)
568 il3945_build_tx_cmd_hwcrypto(il, info, out_cmd, skb, sta_id);
569
570 /* TODO need this for burst mode later on */
571 il3945_build_tx_cmd_basic(il, out_cmd, info, hdr, sta_id);
572
573 il3945_hw_build_tx_cmd_rate(il, out_cmd, info, hdr, sta_id);
574
575 /* Total # bytes to be transmitted */
576 tx_cmd->len = cpu_to_le16((u16) skb->len);
577
578 tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
579 tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
580
581 /*
582 * Use the first empty entry in this queue's command buffer array
583 * to contain the Tx command and MAC header concatenated together
584 * (payload data will be in another buffer).
585 * Size of this varies, due to varying MAC header length.
586 * If end is not dword aligned, we'll have 2 extra bytes at the end
587 * of the MAC header (device reads on dword boundaries).
588 * We'll tell device about this padding later.
589 */
590 len =
591 sizeof(struct il3945_tx_cmd) + sizeof(struct il_cmd_header) +
592 hdr_len;
593 firstlen = (len + 3) & ~3;
594
595 /* Physical address of this Tx command's header (not MAC header!),
596 * within command buffer array. */
597 txcmd_phys =
598 pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen,
599 PCI_DMA_TODEVICE);
600 if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys)))
601 goto drop_unlock;
602
603 /* Set up TFD's 2nd entry to point directly to remainder of skb,
604 * if any (802.11 null frames have no payload). */
605 secondlen = skb->len - hdr_len;
606 if (secondlen > 0) {
607 phys_addr =
608 pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen,
609 PCI_DMA_TODEVICE);
610 if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr)))
611 goto drop_unlock;
612 }
613
614 /* Add buffer containing Tx command and MAC(!) header to TFD's
615 * first entry */
616 il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0);
617 dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
618 dma_unmap_len_set(out_meta, len, firstlen);
619 if (secondlen > 0)
620 il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 0,
621 U32_PAD(secondlen));
622
623 if (!ieee80211_has_morefrags(hdr->frame_control)) {
624 txq->need_update = 1;
625 } else {
626 wait_write_ptr = 1;
627 txq->need_update = 0;
628 }
629
630 il_update_stats(il, true, fc, skb->len);
631
632 D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence));
633 D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
634 il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd));
635 il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr,
636 ieee80211_hdrlen(fc));
637
638 /* Tell device the write idx *just past* this latest filled TFD */
639 q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
640 il_txq_update_write_ptr(il, txq);
641 spin_unlock_irqrestore(&il->lock, flags);
642
643 if (il_queue_space(q) < q->high_mark && il->mac80211_registered) {
644 if (wait_write_ptr) {
645 spin_lock_irqsave(&il->lock, flags);
646 txq->need_update = 1;
647 il_txq_update_write_ptr(il, txq);
648 spin_unlock_irqrestore(&il->lock, flags);
649 }
650
651 il_stop_queue(il, txq);
652 }
653
654 return 0;
655
656drop_unlock:
657 spin_unlock_irqrestore(&il->lock, flags);
658drop:
659 return -1;
660}
661
662static int
663il3945_get_measurement(struct il_priv *il,
664 struct ieee80211_measurement_params *params, u8 type)
665{
666 struct il_spectrum_cmd spectrum;
667 struct il_rx_pkt *pkt;
668 struct il_host_cmd cmd = {
669 .id = C_SPECTRUM_MEASUREMENT,
670 .data = (void *)&spectrum,
671 .flags = CMD_WANT_SKB,
672 };
673 u32 add_time = le64_to_cpu(params->start_time);
674 int rc;
675 int spectrum_resp_status;
676 int duration = le16_to_cpu(params->duration);
677
678 if (il_is_associated(il))
679 add_time =
680 il_usecs_to_beacons(il,
681 le64_to_cpu(params->start_time) -
682 il->_3945.last_tsf,
683 le16_to_cpu(il->timing.beacon_interval));
684
685 memset(&spectrum, 0, sizeof(spectrum));
686
687 spectrum.channel_count = cpu_to_le16(1);
688 spectrum.flags =
689 RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
690 spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
691 cmd.len = sizeof(spectrum);
692 spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
693
694 if (il_is_associated(il))
695 spectrum.start_time =
696 il_add_beacon_time(il, il->_3945.last_beacon_time, add_time,
697 le16_to_cpu(il->timing.beacon_interval));
698 else
699 spectrum.start_time = 0;
700
701 spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
702 spectrum.channels[0].channel = params->channel;
703 spectrum.channels[0].type = type;
704 if (il->active.flags & RXON_FLG_BAND_24G_MSK)
705 spectrum.flags |=
706 RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK |
707 RXON_FLG_TGG_PROTECT_MSK;
708
709 rc = il_send_cmd_sync(il, &cmd);
710 if (rc)
711 return rc;
712
713 pkt = (struct il_rx_pkt *)cmd.reply_page;
714 if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
715 IL_ERR("Bad return from N_RX_ON_ASSOC command\n");
716 rc = -EIO;
717 }
718
719 spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
720 switch (spectrum_resp_status) {
721 case 0: /* Command will be handled */
722 if (pkt->u.spectrum.id != 0xff) {
723 D_INFO("Replaced existing measurement: %d\n",
724 pkt->u.spectrum.id);
725 il->measurement_status &= ~MEASUREMENT_READY;
726 }
727 il->measurement_status |= MEASUREMENT_ACTIVE;
728 rc = 0;
729 break;
730
731 case 1: /* Command will not be handled */
732 rc = -EAGAIN;
733 break;
734 }
735
736 il_free_pages(il, cmd.reply_page);
737
738 return rc;
739}
740
741static void
742il3945_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb)
743{
744 struct il_rx_pkt *pkt = rxb_addr(rxb);
745 struct il_alive_resp *palive;
746 struct delayed_work *pwork;
747
748 palive = &pkt->u.alive_frame;
749
750 D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n",
751 palive->is_valid, palive->ver_type, palive->ver_subtype);
752
753 if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
754 D_INFO("Initialization Alive received.\n");
755 memcpy(&il->card_alive_init, &pkt->u.alive_frame,
756 sizeof(struct il_alive_resp));
757 pwork = &il->init_alive_start;
758 } else {
759 D_INFO("Runtime Alive received.\n");
760 memcpy(&il->card_alive, &pkt->u.alive_frame,
761 sizeof(struct il_alive_resp));
762 pwork = &il->alive_start;
763 il3945_disable_events(il);
764 }
765
766 /* We delay the ALIVE response by 5ms to
767 * give the HW RF Kill time to activate... */
768 if (palive->is_valid == UCODE_VALID_OK)
769 queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5));
770 else
771 IL_WARN("uCode did not respond OK.\n");
772}
773
774static void
775il3945_hdl_add_sta(struct il_priv *il, struct il_rx_buf *rxb)
776{
777#ifdef CONFIG_IWLEGACY_DEBUG
778 struct il_rx_pkt *pkt = rxb_addr(rxb);
779#endif
780
781 D_RX("Received C_ADD_STA: 0x%02X\n", pkt->u.status);
782}
783
784static void
785il3945_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb)
786{
787 struct il_rx_pkt *pkt = rxb_addr(rxb);
788 struct il3945_beacon_notif *beacon = &(pkt->u.beacon_status);
789#ifdef CONFIG_IWLEGACY_DEBUG
790 u8 rate = beacon->beacon_notify_hdr.rate;
791
792 D_RX("beacon status %x retries %d iss %d " "tsf %d %d rate %d\n",
793 le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
794 beacon->beacon_notify_hdr.failure_frame,
795 le32_to_cpu(beacon->ibss_mgr_status),
796 le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate);
797#endif
798
799 il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
800
801}
802
803/* Handle notification from uCode that card's power state is changing
804 * due to software, hardware, or critical temperature RFKILL */
805static void
806il3945_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb)
807{
808 struct il_rx_pkt *pkt = rxb_addr(rxb);
809 u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
810 unsigned long status = il->status;
811
812 IL_WARN("Card state received: HW:%s SW:%s\n",
813 (flags & HW_CARD_DISABLED) ? "Kill" : "On",
814 (flags & SW_CARD_DISABLED) ? "Kill" : "On");
815
816 _il_wr(il, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
817
818 if (flags & HW_CARD_DISABLED)
819 set_bit(S_RFKILL, &il->status);
820 else
821 clear_bit(S_RFKILL, &il->status);
822
823 il_scan_cancel(il);
824
825 if ((test_bit(S_RFKILL, &status) !=
826 test_bit(S_RFKILL, &il->status)))
827 wiphy_rfkill_set_hw_state(il->hw->wiphy,
828 test_bit(S_RFKILL, &il->status));
829 else
830 wake_up(&il->wait_command_queue);
831}
832
833/**
834 * il3945_setup_handlers - Initialize Rx handler callbacks
835 *
836 * Setup the RX handlers for each of the reply types sent from the uCode
837 * to the host.
838 *
839 * This function chains into the hardware specific files for them to setup
840 * any hardware specific handlers as well.
841 */
842static void
843il3945_setup_handlers(struct il_priv *il)
844{
845 il->handlers[N_ALIVE] = il3945_hdl_alive;
846 il->handlers[C_ADD_STA] = il3945_hdl_add_sta;
847 il->handlers[N_ERROR] = il_hdl_error;
848 il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa;
849 il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement;
850 il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep;
851 il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats;
852 il->handlers[N_BEACON] = il3945_hdl_beacon;
853
854 /*
855 * The same handler is used for both the REPLY to a discrete
856 * stats request from the host as well as for the periodic
857 * stats notifications (after received beacons) from the uCode.
858 */
859 il->handlers[C_STATS] = il3945_hdl_c_stats;
860 il->handlers[N_STATS] = il3945_hdl_stats;
861
862 il_setup_rx_scan_handlers(il);
863 il->handlers[N_CARD_STATE] = il3945_hdl_card_state;
864
865 /* Set up hardware specific Rx handlers */
866 il3945_hw_handler_setup(il);
867}
868
869/************************** RX-FUNCTIONS ****************************/
870/*
871 * Rx theory of operation
872 *
873 * The host allocates 32 DMA target addresses and passes the host address
874 * to the firmware at register IL_RFDS_TBL_LOWER + N * RFD_SIZE where N is
875 * 0 to 31
876 *
877 * Rx Queue Indexes
878 * The host/firmware share two idx registers for managing the Rx buffers.
879 *
880 * The READ idx maps to the first position that the firmware may be writing
881 * to -- the driver can read up to (but not including) this position and get
882 * good data.
883 * The READ idx is managed by the firmware once the card is enabled.
884 *
885 * The WRITE idx maps to the last position the driver has read from -- the
886 * position preceding WRITE is the last slot the firmware can place a packet.
887 *
888 * The queue is empty (no good data) if WRITE = READ - 1, and is full if
889 * WRITE = READ.
890 *
891 * During initialization, the host sets up the READ queue position to the first
892 * IDX position, and WRITE to the last (READ - 1 wrapped)
893 *
894 * When the firmware places a packet in a buffer, it will advance the READ idx
895 * and fire the RX interrupt. The driver can then query the READ idx and
896 * process as many packets as possible, moving the WRITE idx forward as it
897 * resets the Rx queue buffers with new memory.
898 *
899 * The management in the driver is as follows:
900 * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
901 * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
902 * to replenish the iwl->rxq->rx_free.
903 * + In il3945_rx_replenish (scheduled) if 'processed' != 'read' then the
904 * iwl->rxq is replenished and the READ IDX is updated (updating the
905 * 'processed' and 'read' driver idxes as well)
906 * + A received packet is processed and handed to the kernel network stack,
907 * detached from the iwl->rxq. The driver 'processed' idx is updated.
908 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
909 * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
910 * IDX is not incremented and iwl->status(RX_STALLED) is set. If there
911 * were enough free buffers and RX_STALLED is set it is cleared.
912 *
913 *
914 * Driver sequence:
915 *
916 * il3945_rx_replenish() Replenishes rx_free list from rx_used, and calls
917 * il3945_rx_queue_restock
918 * il3945_rx_queue_restock() Moves available buffers from rx_free into Rx
919 * queue, updates firmware pointers, and updates
920 * the WRITE idx. If insufficient rx_free buffers
921 * are available, schedules il3945_rx_replenish
922 *
923 * -- enable interrupts --
924 * ISR - il3945_rx() Detach il_rx_bufs from pool up to the
925 * READ IDX, detaching the SKB from the pool.
926 * Moves the packet buffer from queue to rx_used.
927 * Calls il3945_rx_queue_restock to refill any empty
928 * slots.
929 * ...
930 *
931 */
932
933/**
934 * il3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
935 */
936static inline __le32
937il3945_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr)
938{
939 return cpu_to_le32((u32) dma_addr);
940}
941
942/**
943 * il3945_rx_queue_restock - refill RX queue from pre-allocated pool
944 *
945 * If there are slots in the RX queue that need to be restocked,
946 * and we have free pre-allocated buffers, fill the ranks as much
947 * as we can, pulling from rx_free.
948 *
949 * This moves the 'write' idx forward to catch up with 'processed', and
950 * also updates the memory address in the firmware to reference the new
951 * target buffer.
952 */
953static void
954il3945_rx_queue_restock(struct il_priv *il)
955{
956 struct il_rx_queue *rxq = &il->rxq;
957 struct list_head *element;
958 struct il_rx_buf *rxb;
959 unsigned long flags;
960 int write;
961
962 spin_lock_irqsave(&rxq->lock, flags);
963 write = rxq->write & ~0x7;
964 while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
965 /* Get next free Rx buffer, remove from free list */
966 element = rxq->rx_free.next;
967 rxb = list_entry(element, struct il_rx_buf, list);
968 list_del(element);
969
970 /* Point to Rx buffer via next RBD in circular buffer */
971 rxq->bd[rxq->write] =
972 il3945_dma_addr2rbd_ptr(il, rxb->page_dma);
973 rxq->queue[rxq->write] = rxb;
974 rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
975 rxq->free_count--;
976 }
977 spin_unlock_irqrestore(&rxq->lock, flags);
978 /* If the pre-allocated buffer pool is dropping low, schedule to
979 * refill it */
980 if (rxq->free_count <= RX_LOW_WATERMARK)
981 queue_work(il->workqueue, &il->rx_replenish);
982
983 /* If we've added more space for the firmware to place data, tell it.
984 * Increment device's write pointer in multiples of 8. */
985 if (rxq->write_actual != (rxq->write & ~0x7) ||
986 abs(rxq->write - rxq->read) > 7) {
987 spin_lock_irqsave(&rxq->lock, flags);
988 rxq->need_update = 1;
989 spin_unlock_irqrestore(&rxq->lock, flags);
990 il_rx_queue_update_write_ptr(il, rxq);
991 }
992}
993
994/**
995 * il3945_rx_replenish - Move all used packet from rx_used to rx_free
996 *
997 * When moving to rx_free an SKB is allocated for the slot.
998 *
999 * Also restock the Rx queue via il3945_rx_queue_restock.
1000 * This is called as a scheduled work item (except for during initialization)
1001 */
1002static void
1003il3945_rx_allocate(struct il_priv *il, gfp_t priority)
1004{
1005 struct il_rx_queue *rxq = &il->rxq;
1006 struct list_head *element;
1007 struct il_rx_buf *rxb;
1008 struct page *page;
1009 dma_addr_t page_dma;
1010 unsigned long flags;
1011 gfp_t gfp_mask = priority;
1012
1013 while (1) {
1014 spin_lock_irqsave(&rxq->lock, flags);
1015 if (list_empty(&rxq->rx_used)) {
1016 spin_unlock_irqrestore(&rxq->lock, flags);
1017 return;
1018 }
1019 spin_unlock_irqrestore(&rxq->lock, flags);
1020
1021 if (rxq->free_count > RX_LOW_WATERMARK)
1022 gfp_mask |= __GFP_NOWARN;
1023
1024 if (il->hw_params.rx_page_order > 0)
1025 gfp_mask |= __GFP_COMP;
1026
1027 /* Alloc a new receive buffer */
1028 page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
1029 if (!page) {
1030 if (net_ratelimit())
1031 D_INFO("Failed to allocate SKB buffer.\n");
1032 if (rxq->free_count <= RX_LOW_WATERMARK &&
1033 net_ratelimit())
1034 IL_ERR("Failed to allocate SKB buffer with %0x."
1035 "Only %u free buffers remaining.\n",
1036 priority, rxq->free_count);
1037 /* We don't reschedule replenish work here -- we will
1038 * call the restock method and if it still needs
1039 * more buffers it will schedule replenish */
1040 break;
1041 }
1042
1043 /* Get physical address of RB/SKB */
1044 page_dma =
1045 pci_map_page(il->pci_dev, page, 0,
1046 PAGE_SIZE << il->hw_params.rx_page_order,
1047 PCI_DMA_FROMDEVICE);
1048
1049 if (unlikely(pci_dma_mapping_error(il->pci_dev, page_dma))) {
1050 __free_pages(page, il->hw_params.rx_page_order);
1051 break;
1052 }
1053
1054 spin_lock_irqsave(&rxq->lock, flags);
1055
1056 if (list_empty(&rxq->rx_used)) {
1057 spin_unlock_irqrestore(&rxq->lock, flags);
1058 pci_unmap_page(il->pci_dev, page_dma,
1059 PAGE_SIZE << il->hw_params.rx_page_order,
1060 PCI_DMA_FROMDEVICE);
1061 __free_pages(page, il->hw_params.rx_page_order);
1062 return;
1063 }
1064
1065 element = rxq->rx_used.next;
1066 rxb = list_entry(element, struct il_rx_buf, list);
1067 list_del(element);
1068
1069 rxb->page = page;
1070 rxb->page_dma = page_dma;
1071 list_add_tail(&rxb->list, &rxq->rx_free);
1072 rxq->free_count++;
1073 il->alloc_rxb_page++;
1074
1075 spin_unlock_irqrestore(&rxq->lock, flags);
1076 }
1077}
1078
1079void
1080il3945_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
1081{
1082 unsigned long flags;
1083 int i;
1084 spin_lock_irqsave(&rxq->lock, flags);
1085 INIT_LIST_HEAD(&rxq->rx_free);
1086 INIT_LIST_HEAD(&rxq->rx_used);
1087 /* Fill the rx_used queue with _all_ of the Rx buffers */
1088 for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
1089 /* In the reset function, these buffers may have been allocated
1090 * to an SKB, so we need to unmap and free potential storage */
1091 if (rxq->pool[i].page != NULL) {
1092 pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
1093 PAGE_SIZE << il->hw_params.rx_page_order,
1094 PCI_DMA_FROMDEVICE);
1095 __il_free_pages(il, rxq->pool[i].page);
1096 rxq->pool[i].page = NULL;
1097 }
1098 list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
1099 }
1100
1101 /* Set us so that we have processed and used all buffers, but have
1102 * not restocked the Rx queue with fresh buffers */
1103 rxq->read = rxq->write = 0;
1104 rxq->write_actual = 0;
1105 rxq->free_count = 0;
1106 spin_unlock_irqrestore(&rxq->lock, flags);
1107}
1108
1109void
1110il3945_rx_replenish(void *data)
1111{
1112 struct il_priv *il = data;
1113 unsigned long flags;
1114
1115 il3945_rx_allocate(il, GFP_KERNEL);
1116
1117 spin_lock_irqsave(&il->lock, flags);
1118 il3945_rx_queue_restock(il);
1119 spin_unlock_irqrestore(&il->lock, flags);
1120}
1121
1122static void
1123il3945_rx_replenish_now(struct il_priv *il)
1124{
1125 il3945_rx_allocate(il, GFP_ATOMIC);
1126
1127 il3945_rx_queue_restock(il);
1128}
1129
1130/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
1131 * If an SKB has been detached, the POOL needs to have its SKB set to NULL
1132 * This free routine walks the list of POOL entries and if SKB is set to
1133 * non NULL it is unmapped and freed
1134 */
1135static void
1136il3945_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
1137{
1138 int i;
1139 for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
1140 if (rxq->pool[i].page != NULL) {
1141 pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
1142 PAGE_SIZE << il->hw_params.rx_page_order,
1143 PCI_DMA_FROMDEVICE);
1144 __il_free_pages(il, rxq->pool[i].page);
1145 rxq->pool[i].page = NULL;
1146 }
1147 }
1148
1149 dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
1150 rxq->bd_dma);
1151 dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
1152 rxq->rb_stts, rxq->rb_stts_dma);
1153 rxq->bd = NULL;
1154 rxq->rb_stts = NULL;
1155}
1156
1157/* Convert linear signal-to-noise ratio into dB */
1158static u8 ratio2dB[100] = {
1159/* 0 1 2 3 4 5 6 7 8 9 */
1160 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
1161 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
1162 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
1163 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
1164 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
1165 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
1166 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
1167 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
1168 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
1169 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
1170};
1171
1172/* Calculates a relative dB value from a ratio of linear
1173 * (i.e. not dB) signal levels.
1174 * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
1175int
1176il3945_calc_db_from_ratio(int sig_ratio)
1177{
1178 /* 1000:1 or higher just report as 60 dB */
1179 if (sig_ratio >= 1000)
1180 return 60;
1181
1182 /* 100:1 or higher, divide by 10 and use table,
1183 * add 20 dB to make up for divide by 10 */
1184 if (sig_ratio >= 100)
1185 return 20 + (int)ratio2dB[sig_ratio / 10];
1186
1187 /* We shouldn't see this */
1188 if (sig_ratio < 1)
1189 return 0;
1190
1191 /* Use table for ratios 1:1 - 99:1 */
1192 return (int)ratio2dB[sig_ratio];
1193}
1194
1195/**
1196 * il3945_rx_handle - Main entry function for receiving responses from uCode
1197 *
1198 * Uses the il->handlers callback function array to invoke
1199 * the appropriate handlers, including command responses,
1200 * frame-received notifications, and other notifications.
1201 */
1202static void
1203il3945_rx_handle(struct il_priv *il)
1204{
1205 struct il_rx_buf *rxb;
1206 struct il_rx_pkt *pkt;
1207 struct il_rx_queue *rxq = &il->rxq;
1208 u32 r, i;
1209 int reclaim;
1210 unsigned long flags;
1211 u8 fill_rx = 0;
1212 u32 count = 8;
1213 int total_empty = 0;
1214
1215 /* uCode's read idx (stored in shared DRAM) indicates the last Rx
1216 * buffer that the driver may process (last buffer filled by ucode). */
1217 r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
1218 i = rxq->read;
1219
1220 /* calculate total frames need to be restock after handling RX */
1221 total_empty = r - rxq->write_actual;
1222 if (total_empty < 0)
1223 total_empty += RX_QUEUE_SIZE;
1224
1225 if (total_empty > (RX_QUEUE_SIZE / 2))
1226 fill_rx = 1;
1227 /* Rx interrupt, but nothing sent from uCode */
1228 if (i == r)
1229 D_RX("r = %d, i = %d\n", r, i);
1230
1231 while (i != r) {
1232 int len;
1233
1234 rxb = rxq->queue[i];
1235
1236 /* If an RXB doesn't have a Rx queue slot associated with it,
1237 * then a bug has been introduced in the queue refilling
1238 * routines -- catch it here */
1239 BUG_ON(rxb == NULL);
1240
1241 rxq->queue[i] = NULL;
1242
1243 pci_unmap_page(il->pci_dev, rxb->page_dma,
1244 PAGE_SIZE << il->hw_params.rx_page_order,
1245 PCI_DMA_FROMDEVICE);
1246 pkt = rxb_addr(rxb);
1247
1248 len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK;
1249 len += sizeof(u32); /* account for status word */
1250
1251 reclaim = il_need_reclaim(il, pkt);
1252
1253 /* Based on type of command response or notification,
1254 * handle those that need handling via function in
1255 * handlers table. See il3945_setup_handlers() */
1256 if (il->handlers[pkt->hdr.cmd]) {
1257 D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i,
1258 il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
1259 il->isr_stats.handlers[pkt->hdr.cmd]++;
1260 il->handlers[pkt->hdr.cmd] (il, rxb);
1261 } else {
1262 /* No handling needed */
1263 D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r,
1264 i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
1265 }
1266
1267 /*
1268 * XXX: After here, we should always check rxb->page
1269 * against NULL before touching it or its virtual
1270 * memory (pkt). Because some handler might have
1271 * already taken or freed the pages.
1272 */
1273
1274 if (reclaim) {
1275 /* Invoke any callbacks, transfer the buffer to caller,
1276 * and fire off the (possibly) blocking il_send_cmd()
1277 * as we reclaim the driver command queue */
1278 if (rxb->page)
1279 il_tx_cmd_complete(il, rxb);
1280 else
1281 IL_WARN("Claim null rxb?\n");
1282 }
1283
1284 /* Reuse the page if possible. For notification packets and
1285 * SKBs that fail to Rx correctly, add them back into the
1286 * rx_free list for reuse later. */
1287 spin_lock_irqsave(&rxq->lock, flags);
1288 if (rxb->page != NULL) {
1289 rxb->page_dma =
1290 pci_map_page(il->pci_dev, rxb->page, 0,
1291 PAGE_SIZE << il->hw_params.
1292 rx_page_order, PCI_DMA_FROMDEVICE);
1293 if (unlikely(pci_dma_mapping_error(il->pci_dev,
1294 rxb->page_dma))) {
1295 __il_free_pages(il, rxb->page);
1296 rxb->page = NULL;
1297 list_add_tail(&rxb->list, &rxq->rx_used);
1298 } else {
1299 list_add_tail(&rxb->list, &rxq->rx_free);
1300 rxq->free_count++;
1301 }
1302 } else
1303 list_add_tail(&rxb->list, &rxq->rx_used);
1304
1305 spin_unlock_irqrestore(&rxq->lock, flags);
1306
1307 i = (i + 1) & RX_QUEUE_MASK;
1308 /* If there are a lot of unused frames,
1309 * restock the Rx queue so ucode won't assert. */
1310 if (fill_rx) {
1311 count++;
1312 if (count >= 8) {
1313 rxq->read = i;
1314 il3945_rx_replenish_now(il);
1315 count = 0;
1316 }
1317 }
1318 }
1319
1320 /* Backtrack one entry */
1321 rxq->read = i;
1322 if (fill_rx)
1323 il3945_rx_replenish_now(il);
1324 else
1325 il3945_rx_queue_restock(il);
1326}
1327
1328/* call this function to flush any scheduled tasklet */
1329static inline void
1330il3945_synchronize_irq(struct il_priv *il)
1331{
1332 /* wait to make sure we flush pending tasklet */
1333 synchronize_irq(il->pci_dev->irq);
1334 tasklet_kill(&il->irq_tasklet);
1335}
1336
1337static const char *
1338il3945_desc_lookup(int i)
1339{
1340 switch (i) {
1341 case 1:
1342 return "FAIL";
1343 case 2:
1344 return "BAD_PARAM";
1345 case 3:
1346 return "BAD_CHECKSUM";
1347 case 4:
1348 return "NMI_INTERRUPT";
1349 case 5:
1350 return "SYSASSERT";
1351 case 6:
1352 return "FATAL_ERROR";
1353 }
1354
1355 return "UNKNOWN";
1356}
1357
1358#define ERROR_START_OFFSET (1 * sizeof(u32))
1359#define ERROR_ELEM_SIZE (7 * sizeof(u32))
1360
1361void
1362il3945_dump_nic_error_log(struct il_priv *il)
1363{
1364 u32 i;
1365 u32 desc, time, count, base, data1;
1366 u32 blink1, blink2, ilink1, ilink2;
1367
1368 base = le32_to_cpu(il->card_alive.error_event_table_ptr);
1369
1370 if (!il3945_hw_valid_rtc_data_addr(base)) {
1371 IL_ERR("Not valid error log pointer 0x%08X\n", base);
1372 return;
1373 }
1374
1375 count = il_read_targ_mem(il, base);
1376
1377 if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
1378 IL_ERR("Start IWL Error Log Dump:\n");
1379 IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count);
1380 }
1381
1382 IL_ERR("Desc Time asrtPC blink2 "
1383 "ilink1 nmiPC Line\n");
1384 for (i = ERROR_START_OFFSET;
1385 i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
1386 i += ERROR_ELEM_SIZE) {
1387 desc = il_read_targ_mem(il, base + i);
1388 time = il_read_targ_mem(il, base + i + 1 * sizeof(u32));
1389 blink1 = il_read_targ_mem(il, base + i + 2 * sizeof(u32));
1390 blink2 = il_read_targ_mem(il, base + i + 3 * sizeof(u32));
1391 ilink1 = il_read_targ_mem(il, base + i + 4 * sizeof(u32));
1392 ilink2 = il_read_targ_mem(il, base + i + 5 * sizeof(u32));
1393 data1 = il_read_targ_mem(il, base + i + 6 * sizeof(u32));
1394
1395 IL_ERR("%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
1396 il3945_desc_lookup(desc), desc, time, blink1, blink2,
1397 ilink1, ilink2, data1);
1398 }
1399}
1400
1401static void
1402il3945_irq_tasklet(struct il_priv *il)
1403{
1404 u32 inta, handled = 0;
1405 u32 inta_fh;
1406 unsigned long flags;
1407#ifdef CONFIG_IWLEGACY_DEBUG
1408 u32 inta_mask;
1409#endif
1410
1411 spin_lock_irqsave(&il->lock, flags);
1412
1413 /* Ack/clear/reset pending uCode interrupts.
1414 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1415 * and will clear only when CSR_FH_INT_STATUS gets cleared. */
1416 inta = _il_rd(il, CSR_INT);
1417 _il_wr(il, CSR_INT, inta);
1418
1419 /* Ack/clear/reset pending flow-handler (DMA) interrupts.
1420 * Any new interrupts that happen after this, either while we're
1421 * in this tasklet, or later, will show up in next ISR/tasklet. */
1422 inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
1423 _il_wr(il, CSR_FH_INT_STATUS, inta_fh);
1424
1425#ifdef CONFIG_IWLEGACY_DEBUG
1426 if (il_get_debug_level(il) & IL_DL_ISR) {
1427 /* just for debug */
1428 inta_mask = _il_rd(il, CSR_INT_MASK);
1429 D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta,
1430 inta_mask, inta_fh);
1431 }
1432#endif
1433
1434 spin_unlock_irqrestore(&il->lock, flags);
1435
1436 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
1437 * atomic, make sure that inta covers all the interrupts that
1438 * we've discovered, even if FH interrupt came in just after
1439 * reading CSR_INT. */
1440 if (inta_fh & CSR39_FH_INT_RX_MASK)
1441 inta |= CSR_INT_BIT_FH_RX;
1442 if (inta_fh & CSR39_FH_INT_TX_MASK)
1443 inta |= CSR_INT_BIT_FH_TX;
1444
1445 /* Now service all interrupt bits discovered above. */
1446 if (inta & CSR_INT_BIT_HW_ERR) {
1447 IL_ERR("Hardware error detected. Restarting.\n");
1448
1449 /* Tell the device to stop sending interrupts */
1450 il_disable_interrupts(il);
1451
1452 il->isr_stats.hw++;
1453 il_irq_handle_error(il);
1454
1455 handled |= CSR_INT_BIT_HW_ERR;
1456
1457 return;
1458 }
1459#ifdef CONFIG_IWLEGACY_DEBUG
1460 if (il_get_debug_level(il) & (IL_DL_ISR)) {
1461 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1462 if (inta & CSR_INT_BIT_SCD) {
1463 D_ISR("Scheduler finished to transmit "
1464 "the frame/frames.\n");
1465 il->isr_stats.sch++;
1466 }
1467
1468 /* Alive notification via Rx interrupt will do the real work */
1469 if (inta & CSR_INT_BIT_ALIVE) {
1470 D_ISR("Alive interrupt\n");
1471 il->isr_stats.alive++;
1472 }
1473 }
1474#endif
1475 /* Safely ignore these bits for debug checks below */
1476 inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1477
1478 /* Error detected by uCode */
1479 if (inta & CSR_INT_BIT_SW_ERR) {
1480 IL_ERR("Microcode SW error detected. " "Restarting 0x%X.\n",
1481 inta);
1482 il->isr_stats.sw++;
1483 il_irq_handle_error(il);
1484 handled |= CSR_INT_BIT_SW_ERR;
1485 }
1486
1487 /* uCode wakes up after power-down sleep */
1488 if (inta & CSR_INT_BIT_WAKEUP) {
1489 D_ISR("Wakeup interrupt\n");
1490 il_rx_queue_update_write_ptr(il, &il->rxq);
1491
1492 spin_lock_irqsave(&il->lock, flags);
1493 il_txq_update_write_ptr(il, &il->txq[0]);
1494 il_txq_update_write_ptr(il, &il->txq[1]);
1495 il_txq_update_write_ptr(il, &il->txq[2]);
1496 il_txq_update_write_ptr(il, &il->txq[3]);
1497 il_txq_update_write_ptr(il, &il->txq[4]);
1498 spin_unlock_irqrestore(&il->lock, flags);
1499
1500 il->isr_stats.wakeup++;
1501 handled |= CSR_INT_BIT_WAKEUP;
1502 }
1503
1504 /* All uCode command responses, including Tx command responses,
1505 * Rx "responses" (frame-received notification), and other
1506 * notifications from uCode come through here*/
1507 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1508 il3945_rx_handle(il);
1509 il->isr_stats.rx++;
1510 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1511 }
1512
1513 if (inta & CSR_INT_BIT_FH_TX) {
1514 D_ISR("Tx interrupt\n");
1515 il->isr_stats.tx++;
1516
1517 _il_wr(il, CSR_FH_INT_STATUS, (1 << 6));
1518 il_wr(il, FH39_TCSR_CREDIT(FH39_SRVC_CHNL), 0x0);
1519 handled |= CSR_INT_BIT_FH_TX;
1520 }
1521
1522 if (inta & ~handled) {
1523 IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
1524 il->isr_stats.unhandled++;
1525 }
1526
1527 if (inta & ~il->inta_mask) {
1528 IL_WARN("Disabled INTA bits 0x%08x were pending\n",
1529 inta & ~il->inta_mask);
1530 IL_WARN(" with inta_fh = 0x%08x\n", inta_fh);
1531 }
1532
1533 /* Re-enable all interrupts */
1534 /* only Re-enable if disabled by irq */
1535 if (test_bit(S_INT_ENABLED, &il->status))
1536 il_enable_interrupts(il);
1537
1538#ifdef CONFIG_IWLEGACY_DEBUG
1539 if (il_get_debug_level(il) & (IL_DL_ISR)) {
1540 inta = _il_rd(il, CSR_INT);
1541 inta_mask = _il_rd(il, CSR_INT_MASK);
1542 inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
1543 D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
1544 "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
1545 }
1546#endif
1547}
1548
1549static int
1550il3945_get_channels_for_scan(struct il_priv *il, enum ieee80211_band band,
1551 u8 is_active, u8 n_probes,
1552 struct il3945_scan_channel *scan_ch,
1553 struct ieee80211_vif *vif)
1554{
1555 struct ieee80211_channel *chan;
1556 const struct ieee80211_supported_band *sband;
1557 const struct il_channel_info *ch_info;
1558 u16 passive_dwell = 0;
1559 u16 active_dwell = 0;
1560 int added, i;
1561
1562 sband = il_get_hw_mode(il, band);
1563 if (!sband)
1564 return 0;
1565
1566 active_dwell = il_get_active_dwell_time(il, band, n_probes);
1567 passive_dwell = il_get_passive_dwell_time(il, band, vif);
1568
1569 if (passive_dwell <= active_dwell)
1570 passive_dwell = active_dwell + 1;
1571
1572 for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
1573 chan = il->scan_request->channels[i];
1574
1575 if (chan->band != band)
1576 continue;
1577
1578 scan_ch->channel = chan->hw_value;
1579
1580 ch_info = il_get_channel_info(il, band, scan_ch->channel);
1581 if (!il_is_channel_valid(ch_info)) {
1582 D_SCAN("Channel %d is INVALID for this band.\n",
1583 scan_ch->channel);
1584 continue;
1585 }
1586
1587 scan_ch->active_dwell = cpu_to_le16(active_dwell);
1588 scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
1589 /* If passive , set up for auto-switch
1590 * and use long active_dwell time.
1591 */
1592 if (!is_active || il_is_channel_passive(ch_info) ||
1593 (chan->flags & IEEE80211_CHAN_NO_IR)) {
1594 scan_ch->type = 0; /* passive */
1595 if (IL_UCODE_API(il->ucode_ver) == 1)
1596 scan_ch->active_dwell =
1597 cpu_to_le16(passive_dwell - 1);
1598 } else {
1599 scan_ch->type = 1; /* active */
1600 }
1601
1602 /* Set direct probe bits. These may be used both for active
1603 * scan channels (probes gets sent right away),
1604 * or for passive channels (probes get se sent only after
1605 * hearing clear Rx packet).*/
1606 if (IL_UCODE_API(il->ucode_ver) >= 2) {
1607 if (n_probes)
1608 scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
1609 } else {
1610 /* uCode v1 does not allow setting direct probe bits on
1611 * passive channel. */
1612 if ((scan_ch->type & 1) && n_probes)
1613 scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
1614 }
1615
1616 /* Set txpower levels to defaults */
1617 scan_ch->tpc.dsp_atten = 110;
1618 /* scan_pwr_info->tpc.dsp_atten; */
1619
1620 /*scan_pwr_info->tpc.tx_gain; */
1621 if (band == IEEE80211_BAND_5GHZ)
1622 scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
1623 else {
1624 scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
1625 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
1626 * power level:
1627 * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
1628 */
1629 }
1630
1631 D_SCAN("Scanning %d [%s %d]\n", scan_ch->channel,
1632 (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
1633 (scan_ch->type & 1) ? active_dwell : passive_dwell);
1634
1635 scan_ch++;
1636 added++;
1637 }
1638
1639 D_SCAN("total channels to scan %d\n", added);
1640 return added;
1641}
1642
1643static void
1644il3945_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates)
1645{
1646 int i;
1647
1648 for (i = 0; i < RATE_COUNT_LEGACY; i++) {
1649 rates[i].bitrate = il3945_rates[i].ieee * 5;
1650 rates[i].hw_value = i; /* Rate scaling will work on idxes */
1651 rates[i].hw_value_short = i;
1652 rates[i].flags = 0;
1653 if (i > IL39_LAST_OFDM_RATE || i < IL_FIRST_OFDM_RATE) {
1654 /*
1655 * If CCK != 1M then set short preamble rate flag.
1656 */
1657 rates[i].flags |=
1658 (il3945_rates[i].plcp ==
1659 10) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE;
1660 }
1661 }
1662}
1663
1664/******************************************************************************
1665 *
1666 * uCode download functions
1667 *
1668 ******************************************************************************/
1669
1670static void
1671il3945_dealloc_ucode_pci(struct il_priv *il)
1672{
1673 il_free_fw_desc(il->pci_dev, &il->ucode_code);
1674 il_free_fw_desc(il->pci_dev, &il->ucode_data);
1675 il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
1676 il_free_fw_desc(il->pci_dev, &il->ucode_init);
1677 il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
1678 il_free_fw_desc(il->pci_dev, &il->ucode_boot);
1679}
1680
1681/**
1682 * il3945_verify_inst_full - verify runtime uCode image in card vs. host,
1683 * looking at all data.
1684 */
1685static int
1686il3945_verify_inst_full(struct il_priv *il, __le32 * image, u32 len)
1687{
1688 u32 val;
1689 u32 save_len = len;
1690 int rc = 0;
1691 u32 errcnt;
1692
1693 D_INFO("ucode inst image size is %u\n", len);
1694
1695 il_wr(il, HBUS_TARG_MEM_RADDR, IL39_RTC_INST_LOWER_BOUND);
1696
1697 errcnt = 0;
1698 for (; len > 0; len -= sizeof(u32), image++) {
1699 /* read data comes through single port, auto-incr addr */
1700 /* NOTE: Use the debugless read so we don't flood kernel log
1701 * if IL_DL_IO is set */
1702 val = _il_rd(il, HBUS_TARG_MEM_RDAT);
1703 if (val != le32_to_cpu(*image)) {
1704 IL_ERR("uCode INST section is invalid at "
1705 "offset 0x%x, is 0x%x, s/b 0x%x\n",
1706 save_len - len, val, le32_to_cpu(*image));
1707 rc = -EIO;
1708 errcnt++;
1709 if (errcnt >= 20)
1710 break;
1711 }
1712 }
1713
1714 if (!errcnt)
1715 D_INFO("ucode image in INSTRUCTION memory is good\n");
1716
1717 return rc;
1718}
1719
1720/**
1721 * il3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
1722 * using sample data 100 bytes apart. If these sample points are good,
1723 * it's a pretty good bet that everything between them is good, too.
1724 */
1725static int
1726il3945_verify_inst_sparse(struct il_priv *il, __le32 * image, u32 len)
1727{
1728 u32 val;
1729 int rc = 0;
1730 u32 errcnt = 0;
1731 u32 i;
1732
1733 D_INFO("ucode inst image size is %u\n", len);
1734
1735 for (i = 0; i < len; i += 100, image += 100 / sizeof(u32)) {
1736 /* read data comes through single port, auto-incr addr */
1737 /* NOTE: Use the debugless read so we don't flood kernel log
1738 * if IL_DL_IO is set */
1739 il_wr(il, HBUS_TARG_MEM_RADDR, i + IL39_RTC_INST_LOWER_BOUND);
1740 val = _il_rd(il, HBUS_TARG_MEM_RDAT);
1741 if (val != le32_to_cpu(*image)) {
1742#if 0 /* Enable this if you want to see details */
1743 IL_ERR("uCode INST section is invalid at "
1744 "offset 0x%x, is 0x%x, s/b 0x%x\n", i, val,
1745 *image);
1746#endif
1747 rc = -EIO;
1748 errcnt++;
1749 if (errcnt >= 3)
1750 break;
1751 }
1752 }
1753
1754 return rc;
1755}
1756
1757/**
1758 * il3945_verify_ucode - determine which instruction image is in SRAM,
1759 * and verify its contents
1760 */
1761static int
1762il3945_verify_ucode(struct il_priv *il)
1763{
1764 __le32 *image;
1765 u32 len;
1766 int rc = 0;
1767
1768 /* Try bootstrap */
1769 image = (__le32 *) il->ucode_boot.v_addr;
1770 len = il->ucode_boot.len;
1771 rc = il3945_verify_inst_sparse(il, image, len);
1772 if (rc == 0) {
1773 D_INFO("Bootstrap uCode is good in inst SRAM\n");
1774 return 0;
1775 }
1776
1777 /* Try initialize */
1778 image = (__le32 *) il->ucode_init.v_addr;
1779 len = il->ucode_init.len;
1780 rc = il3945_verify_inst_sparse(il, image, len);
1781 if (rc == 0) {
1782 D_INFO("Initialize uCode is good in inst SRAM\n");
1783 return 0;
1784 }
1785
1786 /* Try runtime/protocol */
1787 image = (__le32 *) il->ucode_code.v_addr;
1788 len = il->ucode_code.len;
1789 rc = il3945_verify_inst_sparse(il, image, len);
1790 if (rc == 0) {
1791 D_INFO("Runtime uCode is good in inst SRAM\n");
1792 return 0;
1793 }
1794
1795 IL_ERR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
1796
1797 /* Since nothing seems to match, show first several data entries in
1798 * instruction SRAM, so maybe visual inspection will give a clue.
1799 * Selection of bootstrap image (vs. other images) is arbitrary. */
1800 image = (__le32 *) il->ucode_boot.v_addr;
1801 len = il->ucode_boot.len;
1802 rc = il3945_verify_inst_full(il, image, len);
1803
1804 return rc;
1805}
1806
1807static void
1808il3945_nic_start(struct il_priv *il)
1809{
1810 /* Remove all resets to allow NIC to operate */
1811 _il_wr(il, CSR_RESET, 0);
1812}
1813
1814#define IL3945_UCODE_GET(item) \
1815static u32 il3945_ucode_get_##item(const struct il_ucode_header *ucode)\
1816{ \
1817 return le32_to_cpu(ucode->v1.item); \
1818}
1819
1820static u32
1821il3945_ucode_get_header_size(u32 api_ver)
1822{
1823 return 24;
1824}
1825
1826static u8 *
1827il3945_ucode_get_data(const struct il_ucode_header *ucode)
1828{
1829 return (u8 *) ucode->v1.data;
1830}
1831
1832IL3945_UCODE_GET(inst_size);
1833IL3945_UCODE_GET(data_size);
1834IL3945_UCODE_GET(init_size);
1835IL3945_UCODE_GET(init_data_size);
1836IL3945_UCODE_GET(boot_size);
1837
1838/**
1839 * il3945_read_ucode - Read uCode images from disk file.
1840 *
1841 * Copy into buffers for card to fetch via bus-mastering
1842 */
1843static int
1844il3945_read_ucode(struct il_priv *il)
1845{
1846 const struct il_ucode_header *ucode;
1847 int ret = -EINVAL, idx;
1848 const struct firmware *ucode_raw;
1849 /* firmware file name contains uCode/driver compatibility version */
1850 const char *name_pre = il->cfg->fw_name_pre;
1851 const unsigned int api_max = il->cfg->ucode_api_max;
1852 const unsigned int api_min = il->cfg->ucode_api_min;
1853 char buf[25];
1854 u8 *src;
1855 size_t len;
1856 u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
1857
1858 /* Ask kernel firmware_class module to get the boot firmware off disk.
1859 * request_firmware() is synchronous, file is in memory on return. */
1860 for (idx = api_max; idx >= api_min; idx--) {
1861 sprintf(buf, "%s%u%s", name_pre, idx, ".ucode");
1862 ret = request_firmware(&ucode_raw, buf, &il->pci_dev->dev);
1863 if (ret < 0) {
1864 IL_ERR("%s firmware file req failed: %d\n", buf, ret);
1865 if (ret == -ENOENT)
1866 continue;
1867 else
1868 goto error;
1869 } else {
1870 if (idx < api_max)
1871 IL_ERR("Loaded firmware %s, "
1872 "which is deprecated. "
1873 " Please use API v%u instead.\n", buf,
1874 api_max);
1875 D_INFO("Got firmware '%s' file "
1876 "(%zd bytes) from disk\n", buf, ucode_raw->size);
1877 break;
1878 }
1879 }
1880
1881 if (ret < 0)
1882 goto error;
1883
1884 /* Make sure that we got at least our header! */
1885 if (ucode_raw->size < il3945_ucode_get_header_size(1)) {
1886 IL_ERR("File size way too small!\n");
1887 ret = -EINVAL;
1888 goto err_release;
1889 }
1890
1891 /* Data from ucode file: header followed by uCode images */
1892 ucode = (struct il_ucode_header *)ucode_raw->data;
1893
1894 il->ucode_ver = le32_to_cpu(ucode->ver);
1895 api_ver = IL_UCODE_API(il->ucode_ver);
1896 inst_size = il3945_ucode_get_inst_size(ucode);
1897 data_size = il3945_ucode_get_data_size(ucode);
1898 init_size = il3945_ucode_get_init_size(ucode);
1899 init_data_size = il3945_ucode_get_init_data_size(ucode);
1900 boot_size = il3945_ucode_get_boot_size(ucode);
1901 src = il3945_ucode_get_data(ucode);
1902
1903 /* api_ver should match the api version forming part of the
1904 * firmware filename ... but we don't check for that and only rely
1905 * on the API version read from firmware header from here on forward */
1906
1907 if (api_ver < api_min || api_ver > api_max) {
1908 IL_ERR("Driver unable to support your firmware API. "
1909 "Driver supports v%u, firmware is v%u.\n", api_max,
1910 api_ver);
1911 il->ucode_ver = 0;
1912 ret = -EINVAL;
1913 goto err_release;
1914 }
1915 if (api_ver != api_max)
1916 IL_ERR("Firmware has old API version. Expected %u, "
1917 "got %u. New firmware can be obtained "
1918 "from http://www.intellinuxwireless.org.\n", api_max,
1919 api_ver);
1920
1921 IL_INFO("loaded firmware version %u.%u.%u.%u\n",
1922 IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver),
1923 IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver));
1924
1925 snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version),
1926 "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver),
1927 IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver),
1928 IL_UCODE_SERIAL(il->ucode_ver));
1929
1930 D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver);
1931 D_INFO("f/w package hdr runtime inst size = %u\n", inst_size);
1932 D_INFO("f/w package hdr runtime data size = %u\n", data_size);
1933 D_INFO("f/w package hdr init inst size = %u\n", init_size);
1934 D_INFO("f/w package hdr init data size = %u\n", init_data_size);
1935 D_INFO("f/w package hdr boot inst size = %u\n", boot_size);
1936
1937 /* Verify size of file vs. image size info in file's header */
1938 if (ucode_raw->size !=
1939 il3945_ucode_get_header_size(api_ver) + inst_size + data_size +
1940 init_size + init_data_size + boot_size) {
1941
1942 D_INFO("uCode file size %zd does not match expected size\n",
1943 ucode_raw->size);
1944 ret = -EINVAL;
1945 goto err_release;
1946 }
1947
1948 /* Verify that uCode images will fit in card's SRAM */
1949 if (inst_size > IL39_MAX_INST_SIZE) {
1950 D_INFO("uCode instr len %d too large to fit in\n", inst_size);
1951 ret = -EINVAL;
1952 goto err_release;
1953 }
1954
1955 if (data_size > IL39_MAX_DATA_SIZE) {
1956 D_INFO("uCode data len %d too large to fit in\n", data_size);
1957 ret = -EINVAL;
1958 goto err_release;
1959 }
1960 if (init_size > IL39_MAX_INST_SIZE) {
1961 D_INFO("uCode init instr len %d too large to fit in\n",
1962 init_size);
1963 ret = -EINVAL;
1964 goto err_release;
1965 }
1966 if (init_data_size > IL39_MAX_DATA_SIZE) {
1967 D_INFO("uCode init data len %d too large to fit in\n",
1968 init_data_size);
1969 ret = -EINVAL;
1970 goto err_release;
1971 }
1972 if (boot_size > IL39_MAX_BSM_SIZE) {
1973 D_INFO("uCode boot instr len %d too large to fit in\n",
1974 boot_size);
1975 ret = -EINVAL;
1976 goto err_release;
1977 }
1978
1979 /* Allocate ucode buffers for card's bus-master loading ... */
1980
1981 /* Runtime instructions and 2 copies of data:
1982 * 1) unmodified from disk
1983 * 2) backup cache for save/restore during power-downs */
1984 il->ucode_code.len = inst_size;
1985 il_alloc_fw_desc(il->pci_dev, &il->ucode_code);
1986
1987 il->ucode_data.len = data_size;
1988 il_alloc_fw_desc(il->pci_dev, &il->ucode_data);
1989
1990 il->ucode_data_backup.len = data_size;
1991 il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);
1992
1993 if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
1994 !il->ucode_data_backup.v_addr)
1995 goto err_pci_alloc;
1996
1997 /* Initialization instructions and data */
1998 if (init_size && init_data_size) {
1999 il->ucode_init.len = init_size;
2000 il_alloc_fw_desc(il->pci_dev, &il->ucode_init);
2001
2002 il->ucode_init_data.len = init_data_size;
2003 il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);
2004
2005 if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
2006 goto err_pci_alloc;
2007 }
2008
2009 /* Bootstrap (instructions only, no data) */
2010 if (boot_size) {
2011 il->ucode_boot.len = boot_size;
2012 il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);
2013
2014 if (!il->ucode_boot.v_addr)
2015 goto err_pci_alloc;
2016 }
2017
2018 /* Copy images into buffers for card's bus-master reads ... */
2019
2020 /* Runtime instructions (first block of data in file) */
2021 len = inst_size;
2022 D_INFO("Copying (but not loading) uCode instr len %zd\n", len);
2023 memcpy(il->ucode_code.v_addr, src, len);
2024 src += len;
2025
2026 D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
2027 il->ucode_code.v_addr, (u32) il->ucode_code.p_addr);
2028
2029 /* Runtime data (2nd block)
2030 * NOTE: Copy into backup buffer will be done in il3945_up() */
2031 len = data_size;
2032 D_INFO("Copying (but not loading) uCode data len %zd\n", len);
2033 memcpy(il->ucode_data.v_addr, src, len);
2034 memcpy(il->ucode_data_backup.v_addr, src, len);
2035 src += len;
2036
2037 /* Initialization instructions (3rd block) */
2038 if (init_size) {
2039 len = init_size;
2040 D_INFO("Copying (but not loading) init instr len %zd\n", len);
2041 memcpy(il->ucode_init.v_addr, src, len);
2042 src += len;
2043 }
2044
2045 /* Initialization data (4th block) */
2046 if (init_data_size) {
2047 len = init_data_size;
2048 D_INFO("Copying (but not loading) init data len %zd\n", len);
2049 memcpy(il->ucode_init_data.v_addr, src, len);
2050 src += len;
2051 }
2052
2053 /* Bootstrap instructions (5th block) */
2054 len = boot_size;
2055 D_INFO("Copying (but not loading) boot instr len %zd\n", len);
2056 memcpy(il->ucode_boot.v_addr, src, len);
2057
2058 /* We have our copies now, allow OS release its copies */
2059 release_firmware(ucode_raw);
2060 return 0;
2061
2062err_pci_alloc:
2063 IL_ERR("failed to allocate pci memory\n");
2064 ret = -ENOMEM;
2065 il3945_dealloc_ucode_pci(il);
2066
2067err_release:
2068 release_firmware(ucode_raw);
2069
2070error:
2071 return ret;
2072}
2073
2074/**
2075 * il3945_set_ucode_ptrs - Set uCode address location
2076 *
2077 * Tell initialization uCode where to find runtime uCode.
2078 *
2079 * BSM registers initially contain pointers to initialization uCode.
2080 * We need to replace them to load runtime uCode inst and data,
2081 * and to save runtime data when powering down.
2082 */
2083static int
2084il3945_set_ucode_ptrs(struct il_priv *il)
2085{
2086 dma_addr_t pinst;
2087 dma_addr_t pdata;
2088
2089 /* bits 31:0 for 3945 */
2090 pinst = il->ucode_code.p_addr;
2091 pdata = il->ucode_data_backup.p_addr;
2092
2093 /* Tell bootstrap uCode where to find image to load */
2094 il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
2095 il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
2096 il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, il->ucode_data.len);
2097
2098 /* Inst byte count must be last to set up, bit 31 signals uCode
2099 * that all new ptr/size info is in place */
2100 il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
2101 il->ucode_code.len | BSM_DRAM_INST_LOAD);
2102
2103 D_INFO("Runtime uCode pointers are set.\n");
2104
2105 return 0;
2106}
2107
2108/**
2109 * il3945_init_alive_start - Called after N_ALIVE notification received
2110 *
2111 * Called after N_ALIVE notification received from "initialize" uCode.
2112 *
2113 * Tell "initialize" uCode to go ahead and load the runtime uCode.
2114 */
2115static void
2116il3945_init_alive_start(struct il_priv *il)
2117{
2118 /* Check alive response for "valid" sign from uCode */
2119 if (il->card_alive_init.is_valid != UCODE_VALID_OK) {
2120 /* We had an error bringing up the hardware, so take it
2121 * all the way back down so we can try again */
2122 D_INFO("Initialize Alive failed.\n");
2123 goto restart;
2124 }
2125
2126 /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
2127 * This is a paranoid check, because we would not have gotten the
2128 * "initialize" alive if code weren't properly loaded. */
2129 if (il3945_verify_ucode(il)) {
2130 /* Runtime instruction load was bad;
2131 * take it all the way back down so we can try again */
2132 D_INFO("Bad \"initialize\" uCode load.\n");
2133 goto restart;
2134 }
2135
2136 /* Send pointers to protocol/runtime uCode image ... init code will
2137 * load and launch runtime uCode, which will send us another "Alive"
2138 * notification. */
2139 D_INFO("Initialization Alive received.\n");
2140 if (il3945_set_ucode_ptrs(il)) {
2141 /* Runtime instruction load won't happen;
2142 * take it all the way back down so we can try again */
2143 D_INFO("Couldn't set up uCode pointers.\n");
2144 goto restart;
2145 }
2146 return;
2147
2148restart:
2149 queue_work(il->workqueue, &il->restart);
2150}
2151
2152/**
2153 * il3945_alive_start - called after N_ALIVE notification received
2154 * from protocol/runtime uCode (initialization uCode's
2155 * Alive gets handled by il3945_init_alive_start()).
2156 */
2157static void
2158il3945_alive_start(struct il_priv *il)
2159{
2160 int thermal_spin = 0;
2161 u32 rfkill;
2162
2163 D_INFO("Runtime Alive received.\n");
2164
2165 if (il->card_alive.is_valid != UCODE_VALID_OK) {
2166 /* We had an error bringing up the hardware, so take it
2167 * all the way back down so we can try again */
2168 D_INFO("Alive failed.\n");
2169 goto restart;
2170 }
2171
2172 /* Initialize uCode has loaded Runtime uCode ... verify inst image.
2173 * This is a paranoid check, because we would not have gotten the
2174 * "runtime" alive if code weren't properly loaded. */
2175 if (il3945_verify_ucode(il)) {
2176 /* Runtime instruction load was bad;
2177 * take it all the way back down so we can try again */
2178 D_INFO("Bad runtime uCode load.\n");
2179 goto restart;
2180 }
2181
2182 rfkill = il_rd_prph(il, APMG_RFKILL_REG);
2183 D_INFO("RFKILL status: 0x%x\n", rfkill);
2184
2185 if (rfkill & 0x1) {
2186 clear_bit(S_RFKILL, &il->status);
2187 /* if RFKILL is not on, then wait for thermal
2188 * sensor in adapter to kick in */
2189 while (il3945_hw_get_temperature(il) == 0) {
2190 thermal_spin++;
2191 udelay(10);
2192 }
2193
2194 if (thermal_spin)
2195 D_INFO("Thermal calibration took %dus\n",
2196 thermal_spin * 10);
2197 } else
2198 set_bit(S_RFKILL, &il->status);
2199
2200 /* After the ALIVE response, we can send commands to 3945 uCode */
2201 set_bit(S_ALIVE, &il->status);
2202
2203 /* Enable watchdog to monitor the driver tx queues */
2204 il_setup_watchdog(il);
2205
2206 if (il_is_rfkill(il))
2207 return;
2208
2209 ieee80211_wake_queues(il->hw);
2210
2211 il->active_rate = RATES_MASK_3945;
2212
2213 il_power_update_mode(il, true);
2214
2215 if (il_is_associated(il)) {
2216 struct il3945_rxon_cmd *active_rxon =
2217 (struct il3945_rxon_cmd *)(&il->active);
2218
2219 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2220 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2221 } else {
2222 /* Initialize our rx_config data */
2223 il_connection_init_rx_config(il);
2224 }
2225
2226 /* Configure Bluetooth device coexistence support */
2227 il_send_bt_config(il);
2228
2229 set_bit(S_READY, &il->status);
2230
2231 /* Configure the adapter for unassociated operation */
2232 il3945_commit_rxon(il);
2233
2234 il3945_reg_txpower_periodic(il);
2235
2236 D_INFO("ALIVE processing complete.\n");
2237 wake_up(&il->wait_command_queue);
2238
2239 return;
2240
2241restart:
2242 queue_work(il->workqueue, &il->restart);
2243}
2244
2245static void il3945_cancel_deferred_work(struct il_priv *il);
2246
2247static void
2248__il3945_down(struct il_priv *il)
2249{
2250 unsigned long flags;
2251 int exit_pending;
2252
2253 D_INFO(DRV_NAME " is going down\n");
2254
2255 il_scan_cancel_timeout(il, 200);
2256
2257 exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status);
2258
2259 /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set
2260 * to prevent rearm timer */
2261 del_timer_sync(&il->watchdog);
2262
2263 /* Station information will now be cleared in device */
2264 il_clear_ucode_stations(il);
2265 il_dealloc_bcast_stations(il);
2266 il_clear_driver_stations(il);
2267
2268 /* Unblock any waiting calls */
2269 wake_up_all(&il->wait_command_queue);
2270
2271 /* Wipe out the EXIT_PENDING status bit if we are not actually
2272 * exiting the module */
2273 if (!exit_pending)
2274 clear_bit(S_EXIT_PENDING, &il->status);
2275
2276 /* stop and reset the on-board processor */
2277 _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
2278
2279 /* tell the device to stop sending interrupts */
2280 spin_lock_irqsave(&il->lock, flags);
2281 il_disable_interrupts(il);
2282 spin_unlock_irqrestore(&il->lock, flags);
2283 il3945_synchronize_irq(il);
2284
2285 if (il->mac80211_registered)
2286 ieee80211_stop_queues(il->hw);
2287
2288 /* If we have not previously called il3945_init() then
2289 * clear all bits but the RF Kill bits and return */
2290 if (!il_is_init(il)) {
2291 il->status =
2292 test_bit(S_RFKILL, &il->status) << S_RFKILL |
2293 test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
2294 test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
2295 goto exit;
2296 }
2297
2298 /* ...otherwise clear out all the status bits but the RF Kill
2299 * bit and continue taking the NIC down. */
2300 il->status &=
2301 test_bit(S_RFKILL, &il->status) << S_RFKILL |
2302 test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
2303 test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR |
2304 test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
2305
2306 /*
2307 * We disabled and synchronized interrupt, and priv->mutex is taken, so
2308 * here is the only thread which will program device registers, but
2309 * still have lockdep assertions, so we are taking reg_lock.
2310 */
2311 spin_lock_irq(&il->reg_lock);
2312 /* FIXME: il_grab_nic_access if rfkill is off ? */
2313
2314 il3945_hw_txq_ctx_stop(il);
2315 il3945_hw_rxq_stop(il);
2316 /* Power-down device's busmaster DMA clocks */
2317 _il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
2318 udelay(5);
2319 /* Stop the device, and put it in low power state */
2320 _il_apm_stop(il);
2321
2322 spin_unlock_irq(&il->reg_lock);
2323
2324 il3945_hw_txq_ctx_free(il);
2325exit:
2326 memset(&il->card_alive, 0, sizeof(struct il_alive_resp));
2327
2328 if (il->beacon_skb)
2329 dev_kfree_skb(il->beacon_skb);
2330 il->beacon_skb = NULL;
2331
2332 /* clear out any free frames */
2333 il3945_clear_free_frames(il);
2334}
2335
2336static void
2337il3945_down(struct il_priv *il)
2338{
2339 mutex_lock(&il->mutex);
2340 __il3945_down(il);
2341 mutex_unlock(&il->mutex);
2342
2343 il3945_cancel_deferred_work(il);
2344}
2345
2346#define MAX_HW_RESTARTS 5
2347
2348static int
2349il3945_alloc_bcast_station(struct il_priv *il)
2350{
2351 unsigned long flags;
2352 u8 sta_id;
2353
2354 spin_lock_irqsave(&il->sta_lock, flags);
2355 sta_id = il_prep_station(il, il_bcast_addr, false, NULL);
2356 if (sta_id == IL_INVALID_STATION) {
2357 IL_ERR("Unable to prepare broadcast station\n");
2358 spin_unlock_irqrestore(&il->sta_lock, flags);
2359
2360 return -EINVAL;
2361 }
2362
2363 il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE;
2364 il->stations[sta_id].used |= IL_STA_BCAST;
2365 spin_unlock_irqrestore(&il->sta_lock, flags);
2366
2367 return 0;
2368}
2369
2370static int
2371__il3945_up(struct il_priv *il)
2372{
2373 int rc, i;
2374
2375 rc = il3945_alloc_bcast_station(il);
2376 if (rc)
2377 return rc;
2378
2379 if (test_bit(S_EXIT_PENDING, &il->status)) {
2380 IL_WARN("Exit pending; will not bring the NIC up\n");
2381 return -EIO;
2382 }
2383
2384 if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
2385 IL_ERR("ucode not available for device bring up\n");
2386 return -EIO;
2387 }
2388
2389 /* If platform's RF_KILL switch is NOT set to KILL */
2390 if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
2391 clear_bit(S_RFKILL, &il->status);
2392 else {
2393 set_bit(S_RFKILL, &il->status);
2394 return -ERFKILL;
2395 }
2396
2397 _il_wr(il, CSR_INT, 0xFFFFFFFF);
2398
2399 rc = il3945_hw_nic_init(il);
2400 if (rc) {
2401 IL_ERR("Unable to int nic\n");
2402 return rc;
2403 }
2404
2405 /* make sure rfkill handshake bits are cleared */
2406 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2407 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
2408
2409 /* clear (again), then enable host interrupts */
2410 _il_wr(il, CSR_INT, 0xFFFFFFFF);
2411 il_enable_interrupts(il);
2412
2413 /* really make sure rfkill handshake bits are cleared */
2414 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2415 _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2416
2417 /* Copy original ucode data image from disk into backup cache.
2418 * This will be used to initialize the on-board processor's
2419 * data SRAM for a clean start when the runtime program first loads. */
2420 memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
2421 il->ucode_data.len);
2422
2423 /* We return success when we resume from suspend and rf_kill is on. */
2424 if (test_bit(S_RFKILL, &il->status))
2425 return 0;
2426
2427 for (i = 0; i < MAX_HW_RESTARTS; i++) {
2428
2429 /* load bootstrap state machine,
2430 * load bootstrap program into processor's memory,
2431 * prepare to load the "initialize" uCode */
2432 rc = il->ops->load_ucode(il);
2433
2434 if (rc) {
2435 IL_ERR("Unable to set up bootstrap uCode: %d\n", rc);
2436 continue;
2437 }
2438
2439 /* start card; "initialize" will load runtime ucode */
2440 il3945_nic_start(il);
2441
2442 D_INFO(DRV_NAME " is coming up\n");
2443
2444 return 0;
2445 }
2446
2447 set_bit(S_EXIT_PENDING, &il->status);
2448 __il3945_down(il);
2449 clear_bit(S_EXIT_PENDING, &il->status);
2450
2451 /* tried to restart and config the device for as long as our
2452 * patience could withstand */
2453 IL_ERR("Unable to initialize device after %d attempts.\n", i);
2454 return -EIO;
2455}
2456
2457/*****************************************************************************
2458 *
2459 * Workqueue callbacks
2460 *
2461 *****************************************************************************/
2462
2463static void
2464il3945_bg_init_alive_start(struct work_struct *data)
2465{
2466 struct il_priv *il =
2467 container_of(data, struct il_priv, init_alive_start.work);
2468
2469 mutex_lock(&il->mutex);
2470 if (test_bit(S_EXIT_PENDING, &il->status))
2471 goto out;
2472
2473 il3945_init_alive_start(il);
2474out:
2475 mutex_unlock(&il->mutex);
2476}
2477
2478static void
2479il3945_bg_alive_start(struct work_struct *data)
2480{
2481 struct il_priv *il =
2482 container_of(data, struct il_priv, alive_start.work);
2483
2484 mutex_lock(&il->mutex);
2485 if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL)
2486 goto out;
2487
2488 il3945_alive_start(il);
2489out:
2490 mutex_unlock(&il->mutex);
2491}
2492
2493/*
2494 * 3945 cannot interrupt driver when hardware rf kill switch toggles;
2495 * driver must poll CSR_GP_CNTRL_REG register for change. This register
2496 * *is* readable even when device has been SW_RESET into low power mode
2497 * (e.g. during RF KILL).
2498 */
2499static void
2500il3945_rfkill_poll(struct work_struct *data)
2501{
2502 struct il_priv *il =
2503 container_of(data, struct il_priv, _3945.rfkill_poll.work);
2504 bool old_rfkill = test_bit(S_RFKILL, &il->status);
2505 bool new_rfkill =
2506 !(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
2507
2508 if (new_rfkill != old_rfkill) {
2509 if (new_rfkill)
2510 set_bit(S_RFKILL, &il->status);
2511 else
2512 clear_bit(S_RFKILL, &il->status);
2513
2514 wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill);
2515
2516 D_RF_KILL("RF_KILL bit toggled to %s.\n",
2517 new_rfkill ? "disable radio" : "enable radio");
2518 }
2519
2520 /* Keep this running, even if radio now enabled. This will be
2521 * cancelled in mac_start() if system decides to start again */
2522 queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
2523 round_jiffies_relative(2 * HZ));
2524
2525}
2526
2527int
2528il3945_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
2529{
2530 struct il_host_cmd cmd = {
2531 .id = C_SCAN,
2532 .len = sizeof(struct il3945_scan_cmd),
2533 .flags = CMD_SIZE_HUGE,
2534 };
2535 struct il3945_scan_cmd *scan;
2536 u8 n_probes = 0;
2537 enum ieee80211_band band;
2538 bool is_active = false;
2539 int ret;
2540 u16 len;
2541
2542 lockdep_assert_held(&il->mutex);
2543
2544 if (!il->scan_cmd) {
2545 il->scan_cmd =
2546 kmalloc(sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE,
2547 GFP_KERNEL);
2548 if (!il->scan_cmd) {
2549 D_SCAN("Fail to allocate scan memory\n");
2550 return -ENOMEM;
2551 }
2552 }
2553 scan = il->scan_cmd;
2554 memset(scan, 0, sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE);
2555
2556 scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
2557 scan->quiet_time = IL_ACTIVE_QUIET_TIME;
2558
2559 if (il_is_associated(il)) {
2560 u16 interval;
2561 u32 extra;
2562 u32 suspend_time = 100;
2563 u32 scan_suspend_time = 100;
2564
2565 D_INFO("Scanning while associated...\n");
2566
2567 interval = vif->bss_conf.beacon_int;
2568
2569 scan->suspend_time = 0;
2570 scan->max_out_time = cpu_to_le32(200 * 1024);
2571 if (!interval)
2572 interval = suspend_time;
2573 /*
2574 * suspend time format:
2575 * 0-19: beacon interval in usec (time before exec.)
2576 * 20-23: 0
2577 * 24-31: number of beacons (suspend between channels)
2578 */
2579
2580 extra = (suspend_time / interval) << 24;
2581 scan_suspend_time =
2582 0xFF0FFFFF & (extra | ((suspend_time % interval) * 1024));
2583
2584 scan->suspend_time = cpu_to_le32(scan_suspend_time);
2585 D_SCAN("suspend_time 0x%X beacon interval %d\n",
2586 scan_suspend_time, interval);
2587 }
2588
2589 if (il->scan_request->n_ssids) {
2590 int i, p = 0;
2591 D_SCAN("Kicking off active scan\n");
2592 for (i = 0; i < il->scan_request->n_ssids; i++) {
2593 /* always does wildcard anyway */
2594 if (!il->scan_request->ssids[i].ssid_len)
2595 continue;
2596 scan->direct_scan[p].id = WLAN_EID_SSID;
2597 scan->direct_scan[p].len =
2598 il->scan_request->ssids[i].ssid_len;
2599 memcpy(scan->direct_scan[p].ssid,
2600 il->scan_request->ssids[i].ssid,
2601 il->scan_request->ssids[i].ssid_len);
2602 n_probes++;
2603 p++;
2604 }
2605 is_active = true;
2606 } else
2607 D_SCAN("Kicking off passive scan.\n");
2608
2609 /* We don't build a direct scan probe request; the uCode will do
2610 * that based on the direct_mask added to each channel entry */
2611 scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
2612 scan->tx_cmd.sta_id = il->hw_params.bcast_id;
2613 scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2614
2615 /* flags + rate selection */
2616
2617 switch (il->scan_band) {
2618 case IEEE80211_BAND_2GHZ:
2619 scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
2620 scan->tx_cmd.rate = RATE_1M_PLCP;
2621 band = IEEE80211_BAND_2GHZ;
2622 break;
2623 case IEEE80211_BAND_5GHZ:
2624 scan->tx_cmd.rate = RATE_6M_PLCP;
2625 band = IEEE80211_BAND_5GHZ;
2626 break;
2627 default:
2628 IL_WARN("Invalid scan band\n");
2629 return -EIO;
2630 }
2631
2632 /*
2633 * If active scaning is requested but a certain channel is marked
2634 * passive, we can do active scanning if we detect transmissions. For
2635 * passive only scanning disable switching to active on any channel.
2636 */
2637 scan->good_CRC_th =
2638 is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER;
2639
2640 len =
2641 il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data,
2642 vif->addr, il->scan_request->ie,
2643 il->scan_request->ie_len,
2644 IL_MAX_SCAN_SIZE - sizeof(*scan));
2645 scan->tx_cmd.len = cpu_to_le16(len);
2646
2647 /* select Rx antennas */
2648 scan->flags |= il3945_get_antenna_flags(il);
2649
2650 scan->channel_count =
2651 il3945_get_channels_for_scan(il, band, is_active, n_probes,
2652 (void *)&scan->data[len], vif);
2653 if (scan->channel_count == 0) {
2654 D_SCAN("channel count %d\n", scan->channel_count);
2655 return -EIO;
2656 }
2657
2658 cmd.len +=
2659 le16_to_cpu(scan->tx_cmd.len) +
2660 scan->channel_count * sizeof(struct il3945_scan_channel);
2661 cmd.data = scan;
2662 scan->len = cpu_to_le16(cmd.len);
2663
2664 set_bit(S_SCAN_HW, &il->status);
2665 ret = il_send_cmd_sync(il, &cmd);
2666 if (ret)
2667 clear_bit(S_SCAN_HW, &il->status);
2668 return ret;
2669}
2670
2671void
2672il3945_post_scan(struct il_priv *il)
2673{
2674 /*
2675 * Since setting the RXON may have been deferred while
2676 * performing the scan, fire one off if needed
2677 */
2678 if (memcmp(&il->staging, &il->active, sizeof(il->staging)))
2679 il3945_commit_rxon(il);
2680}
2681
2682static void
2683il3945_bg_restart(struct work_struct *data)
2684{
2685 struct il_priv *il = container_of(data, struct il_priv, restart);
2686
2687 if (test_bit(S_EXIT_PENDING, &il->status))
2688 return;
2689
2690 if (test_and_clear_bit(S_FW_ERROR, &il->status)) {
2691 mutex_lock(&il->mutex);
2692 il->is_open = 0;
2693 mutex_unlock(&il->mutex);
2694 il3945_down(il);
2695 ieee80211_restart_hw(il->hw);
2696 } else {
2697 il3945_down(il);
2698
2699 mutex_lock(&il->mutex);
2700 if (test_bit(S_EXIT_PENDING, &il->status)) {
2701 mutex_unlock(&il->mutex);
2702 return;
2703 }
2704
2705 __il3945_up(il);
2706 mutex_unlock(&il->mutex);
2707 }
2708}
2709
2710static void
2711il3945_bg_rx_replenish(struct work_struct *data)
2712{
2713 struct il_priv *il = container_of(data, struct il_priv, rx_replenish);
2714
2715 mutex_lock(&il->mutex);
2716 if (test_bit(S_EXIT_PENDING, &il->status))
2717 goto out;
2718
2719 il3945_rx_replenish(il);
2720out:
2721 mutex_unlock(&il->mutex);
2722}
2723
2724void
2725il3945_post_associate(struct il_priv *il)
2726{
2727 int rc = 0;
2728 struct ieee80211_conf *conf = NULL;
2729
2730 if (!il->vif || !il->is_open)
2731 return;
2732
2733 D_ASSOC("Associated as %d to: %pM\n", il->vif->bss_conf.aid,
2734 il->active.bssid_addr);
2735
2736 if (test_bit(S_EXIT_PENDING, &il->status))
2737 return;
2738
2739 il_scan_cancel_timeout(il, 200);
2740
2741 conf = &il->hw->conf;
2742
2743 il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2744 il3945_commit_rxon(il);
2745
2746 rc = il_send_rxon_timing(il);
2747 if (rc)
2748 IL_WARN("C_RXON_TIMING failed - " "Attempting to continue.\n");
2749
2750 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2751
2752 il->staging.assoc_id = cpu_to_le16(il->vif->bss_conf.aid);
2753
2754 D_ASSOC("assoc id %d beacon interval %d\n", il->vif->bss_conf.aid,
2755 il->vif->bss_conf.beacon_int);
2756
2757 if (il->vif->bss_conf.use_short_preamble)
2758 il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2759 else
2760 il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2761
2762 if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
2763 if (il->vif->bss_conf.use_short_slot)
2764 il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
2765 else
2766 il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2767 }
2768
2769 il3945_commit_rxon(il);
2770
2771 switch (il->vif->type) {
2772 case NL80211_IFTYPE_STATION:
2773 il3945_rate_scale_init(il->hw, IL_AP_ID);
2774 break;
2775 case NL80211_IFTYPE_ADHOC:
2776 il3945_send_beacon_cmd(il);
2777 break;
2778 default:
2779 IL_ERR("%s Should not be called in %d mode\n", __func__,
2780 il->vif->type);
2781 break;
2782 }
2783}
2784
2785/*****************************************************************************
2786 *
2787 * mac80211 entry point functions
2788 *
2789 *****************************************************************************/
2790
2791#define UCODE_READY_TIMEOUT (2 * HZ)
2792
2793static int
2794il3945_mac_start(struct ieee80211_hw *hw)
2795{
2796 struct il_priv *il = hw->priv;
2797 int ret;
2798
2799 /* we should be verifying the device is ready to be opened */
2800 mutex_lock(&il->mutex);
2801 D_MAC80211("enter\n");
2802
2803 /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
2804 * ucode filename and max sizes are card-specific. */
2805
2806 if (!il->ucode_code.len) {
2807 ret = il3945_read_ucode(il);
2808 if (ret) {
2809 IL_ERR("Could not read microcode: %d\n", ret);
2810 mutex_unlock(&il->mutex);
2811 goto out_release_irq;
2812 }
2813 }
2814
2815 ret = __il3945_up(il);
2816
2817 mutex_unlock(&il->mutex);
2818
2819 if (ret)
2820 goto out_release_irq;
2821
2822 D_INFO("Start UP work.\n");
2823
2824 /* Wait for START_ALIVE from ucode. Otherwise callbacks from
2825 * mac80211 will not be run successfully. */
2826 ret = wait_event_timeout(il->wait_command_queue,
2827 test_bit(S_READY, &il->status),
2828 UCODE_READY_TIMEOUT);
2829 if (!ret) {
2830 if (!test_bit(S_READY, &il->status)) {
2831 IL_ERR("Wait for START_ALIVE timeout after %dms.\n",
2832 jiffies_to_msecs(UCODE_READY_TIMEOUT));
2833 ret = -ETIMEDOUT;
2834 goto out_release_irq;
2835 }
2836 }
2837
2838 /* ucode is running and will send rfkill notifications,
2839 * no need to poll the killswitch state anymore */
2840 cancel_delayed_work(&il->_3945.rfkill_poll);
2841
2842 il->is_open = 1;
2843 D_MAC80211("leave\n");
2844 return 0;
2845
2846out_release_irq:
2847 il->is_open = 0;
2848 D_MAC80211("leave - failed\n");
2849 return ret;
2850}
2851
2852static void
2853il3945_mac_stop(struct ieee80211_hw *hw)
2854{
2855 struct il_priv *il = hw->priv;
2856
2857 D_MAC80211("enter\n");
2858
2859 if (!il->is_open) {
2860 D_MAC80211("leave - skip\n");
2861 return;
2862 }
2863
2864 il->is_open = 0;
2865
2866 il3945_down(il);
2867
2868 flush_workqueue(il->workqueue);
2869
2870 /* start polling the killswitch state again */
2871 queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
2872 round_jiffies_relative(2 * HZ));
2873
2874 D_MAC80211("leave\n");
2875}
2876
2877static void
2878il3945_mac_tx(struct ieee80211_hw *hw,
2879 struct ieee80211_tx_control *control,
2880 struct sk_buff *skb)
2881{
2882 struct il_priv *il = hw->priv;
2883
2884 D_MAC80211("enter\n");
2885
2886 D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
2887 ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
2888
2889 if (il3945_tx_skb(il, control->sta, skb))
2890 dev_kfree_skb_any(skb);
2891
2892 D_MAC80211("leave\n");
2893}
2894
2895void
2896il3945_config_ap(struct il_priv *il)
2897{
2898 struct ieee80211_vif *vif = il->vif;
2899 int rc = 0;
2900
2901 if (test_bit(S_EXIT_PENDING, &il->status))
2902 return;
2903
2904 /* The following should be done only at AP bring up */
2905 if (!(il_is_associated(il))) {
2906
2907 /* RXON - unassoc (to set timing command) */
2908 il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2909 il3945_commit_rxon(il);
2910
2911 /* RXON Timing */
2912 rc = il_send_rxon_timing(il);
2913 if (rc)
2914 IL_WARN("C_RXON_TIMING failed - "
2915 "Attempting to continue.\n");
2916
2917 il->staging.assoc_id = 0;
2918
2919 if (vif->bss_conf.use_short_preamble)
2920 il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2921 else
2922 il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2923
2924 if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
2925 if (vif->bss_conf.use_short_slot)
2926 il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
2927 else
2928 il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2929 }
2930 /* restore RXON assoc */
2931 il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2932 il3945_commit_rxon(il);
2933 }
2934 il3945_send_beacon_cmd(il);
2935}
2936
2937static int
2938il3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2939 struct ieee80211_vif *vif, struct ieee80211_sta *sta,
2940 struct ieee80211_key_conf *key)
2941{
2942 struct il_priv *il = hw->priv;
2943 int ret = 0;
2944 u8 sta_id = IL_INVALID_STATION;
2945 u8 static_key;
2946
2947 D_MAC80211("enter\n");
2948
2949 if (il3945_mod_params.sw_crypto) {
2950 D_MAC80211("leave - hwcrypto disabled\n");
2951 return -EOPNOTSUPP;
2952 }
2953
2954 /*
2955 * To support IBSS RSN, don't program group keys in IBSS, the
2956 * hardware will then not attempt to decrypt the frames.
2957 */
2958 if (vif->type == NL80211_IFTYPE_ADHOC &&
2959 !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
2960 D_MAC80211("leave - IBSS RSN\n");
2961 return -EOPNOTSUPP;
2962 }
2963
2964 static_key = !il_is_associated(il);
2965
2966 if (!static_key) {
2967 sta_id = il_sta_id_or_broadcast(il, sta);
2968 if (sta_id == IL_INVALID_STATION) {
2969 D_MAC80211("leave - station not found\n");
2970 return -EINVAL;
2971 }
2972 }
2973
2974 mutex_lock(&il->mutex);
2975 il_scan_cancel_timeout(il, 100);
2976
2977 switch (cmd) {
2978 case SET_KEY:
2979 if (static_key)
2980 ret = il3945_set_static_key(il, key);
2981 else
2982 ret = il3945_set_dynamic_key(il, key, sta_id);
2983 D_MAC80211("enable hwcrypto key\n");
2984 break;
2985 case DISABLE_KEY:
2986 if (static_key)
2987 ret = il3945_remove_static_key(il);
2988 else
2989 ret = il3945_clear_sta_key_info(il, sta_id);
2990 D_MAC80211("disable hwcrypto key\n");
2991 break;
2992 default:
2993 ret = -EINVAL;
2994 }
2995
2996 D_MAC80211("leave ret %d\n", ret);
2997 mutex_unlock(&il->mutex);
2998
2999 return ret;
3000}
3001
3002static int
3003il3945_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
3004 struct ieee80211_sta *sta)
3005{
3006 struct il_priv *il = hw->priv;
3007 struct il3945_sta_priv *sta_priv = (void *)sta->drv_priv;
3008 int ret;
3009 bool is_ap = vif->type == NL80211_IFTYPE_STATION;
3010 u8 sta_id;
3011
3012 mutex_lock(&il->mutex);
3013 D_INFO("station %pM\n", sta->addr);
3014 sta_priv->common.sta_id = IL_INVALID_STATION;
3015
3016 ret = il_add_station_common(il, sta->addr, is_ap, sta, &sta_id);
3017 if (ret) {
3018 IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret);
3019 /* Should we return success if return code is EEXIST ? */
3020 mutex_unlock(&il->mutex);
3021 return ret;
3022 }
3023
3024 sta_priv->common.sta_id = sta_id;
3025
3026 /* Initialize rate scaling */
3027 D_INFO("Initializing rate scaling for station %pM\n", sta->addr);
3028 il3945_rs_rate_init(il, sta, sta_id);
3029 mutex_unlock(&il->mutex);
3030
3031 return 0;
3032}
3033
3034static void
3035il3945_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
3036 unsigned int *total_flags, u64 multicast)
3037{
3038 struct il_priv *il = hw->priv;
3039 __le32 filter_or = 0, filter_nand = 0;
3040
3041#define CHK(test, flag) do { \
3042 if (*total_flags & (test)) \
3043 filter_or |= (flag); \
3044 else \
3045 filter_nand |= (flag); \
3046 } while (0)
3047
3048 D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags,
3049 *total_flags);
3050
3051 CHK(FIF_OTHER_BSS, RXON_FILTER_PROMISC_MSK);
3052 CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
3053 CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
3054
3055#undef CHK
3056
3057 mutex_lock(&il->mutex);
3058
3059 il->staging.filter_flags &= ~filter_nand;
3060 il->staging.filter_flags |= filter_or;
3061
3062 /*
3063 * Not committing directly because hardware can perform a scan,
3064 * but even if hw is ready, committing here breaks for some reason,
3065 * we'll eventually commit the filter flags change anyway.
3066 */
3067
3068 mutex_unlock(&il->mutex);
3069
3070 /*
3071 * Receiving all multicast frames is always enabled by the
3072 * default flags setup in il_connection_init_rx_config()
3073 * since we currently do not support programming multicast
3074 * filters into the device.
3075 */
3076 *total_flags &=
3077 FIF_OTHER_BSS | FIF_ALLMULTI |
3078 FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
3079}
3080
3081/*****************************************************************************
3082 *
3083 * sysfs attributes
3084 *
3085 *****************************************************************************/
3086
3087#ifdef CONFIG_IWLEGACY_DEBUG
3088
3089/*
3090 * The following adds a new attribute to the sysfs representation
3091 * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
3092 * used for controlling the debug level.
3093 *
3094 * See the level definitions in iwl for details.
3095 *
3096 * The debug_level being managed using sysfs below is a per device debug
3097 * level that is used instead of the global debug level if it (the per
3098 * device debug level) is set.
3099 */
3100static ssize_t
3101il3945_show_debug_level(struct device *d, struct device_attribute *attr,
3102 char *buf)
3103{
3104 struct il_priv *il = dev_get_drvdata(d);
3105 return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
3106}
3107
3108static ssize_t
3109il3945_store_debug_level(struct device *d, struct device_attribute *attr,
3110 const char *buf, size_t count)
3111{
3112 struct il_priv *il = dev_get_drvdata(d);
3113 unsigned long val;
3114 int ret;
3115
3116 ret = kstrtoul(buf, 0, &val);
3117 if (ret)
3118 IL_INFO("%s is not in hex or decimal form.\n", buf);
3119 else
3120 il->debug_level = val;
3121
3122 return strnlen(buf, count);
3123}
3124
3125static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, il3945_show_debug_level,
3126 il3945_store_debug_level);
3127
3128#endif /* CONFIG_IWLEGACY_DEBUG */
3129
3130static ssize_t
3131il3945_show_temperature(struct device *d, struct device_attribute *attr,
3132 char *buf)
3133{
3134 struct il_priv *il = dev_get_drvdata(d);
3135
3136 if (!il_is_alive(il))
3137 return -EAGAIN;
3138
3139 return sprintf(buf, "%d\n", il3945_hw_get_temperature(il));
3140}
3141
3142static DEVICE_ATTR(temperature, S_IRUGO, il3945_show_temperature, NULL);
3143
3144static ssize_t
3145il3945_show_tx_power(struct device *d, struct device_attribute *attr, char *buf)
3146{
3147 struct il_priv *il = dev_get_drvdata(d);
3148 return sprintf(buf, "%d\n", il->tx_power_user_lmt);
3149}
3150
3151static ssize_t
3152il3945_store_tx_power(struct device *d, struct device_attribute *attr,
3153 const char *buf, size_t count)
3154{
3155 struct il_priv *il = dev_get_drvdata(d);
3156 char *p = (char *)buf;
3157 u32 val;
3158
3159 val = simple_strtoul(p, &p, 10);
3160 if (p == buf)
3161 IL_INFO(": %s is not in decimal form.\n", buf);
3162 else
3163 il3945_hw_reg_set_txpower(il, val);
3164
3165 return count;
3166}
3167
3168static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, il3945_show_tx_power,
3169 il3945_store_tx_power);
3170
3171static ssize_t
3172il3945_show_flags(struct device *d, struct device_attribute *attr, char *buf)
3173{
3174 struct il_priv *il = dev_get_drvdata(d);
3175
3176 return sprintf(buf, "0x%04X\n", il->active.flags);
3177}
3178
3179static ssize_t
3180il3945_store_flags(struct device *d, struct device_attribute *attr,
3181 const char *buf, size_t count)
3182{
3183 struct il_priv *il = dev_get_drvdata(d);
3184 u32 flags = simple_strtoul(buf, NULL, 0);
3185
3186 mutex_lock(&il->mutex);
3187 if (le32_to_cpu(il->staging.flags) != flags) {
3188 /* Cancel any currently running scans... */
3189 if (il_scan_cancel_timeout(il, 100))
3190 IL_WARN("Could not cancel scan.\n");
3191 else {
3192 D_INFO("Committing rxon.flags = 0x%04X\n", flags);
3193 il->staging.flags = cpu_to_le32(flags);
3194 il3945_commit_rxon(il);
3195 }
3196 }
3197 mutex_unlock(&il->mutex);
3198
3199 return count;
3200}
3201
3202static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, il3945_show_flags,
3203 il3945_store_flags);
3204
3205static ssize_t
3206il3945_show_filter_flags(struct device *d, struct device_attribute *attr,
3207 char *buf)
3208{
3209 struct il_priv *il = dev_get_drvdata(d);
3210
3211 return sprintf(buf, "0x%04X\n", le32_to_cpu(il->active.filter_flags));
3212}
3213
3214static ssize_t
3215il3945_store_filter_flags(struct device *d, struct device_attribute *attr,
3216 const char *buf, size_t count)
3217{
3218 struct il_priv *il = dev_get_drvdata(d);
3219 u32 filter_flags = simple_strtoul(buf, NULL, 0);
3220
3221 mutex_lock(&il->mutex);
3222 if (le32_to_cpu(il->staging.filter_flags) != filter_flags) {
3223 /* Cancel any currently running scans... */
3224 if (il_scan_cancel_timeout(il, 100))
3225 IL_WARN("Could not cancel scan.\n");
3226 else {
3227 D_INFO("Committing rxon.filter_flags = " "0x%04X\n",
3228 filter_flags);
3229 il->staging.filter_flags = cpu_to_le32(filter_flags);
3230 il3945_commit_rxon(il);
3231 }
3232 }
3233 mutex_unlock(&il->mutex);
3234
3235 return count;
3236}
3237
3238static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, il3945_show_filter_flags,
3239 il3945_store_filter_flags);
3240
3241static ssize_t
3242il3945_show_measurement(struct device *d, struct device_attribute *attr,
3243 char *buf)
3244{
3245 struct il_priv *il = dev_get_drvdata(d);
3246 struct il_spectrum_notification measure_report;
3247 u32 size = sizeof(measure_report), len = 0, ofs = 0;
3248 u8 *data = (u8 *) &measure_report;
3249 unsigned long flags;
3250
3251 spin_lock_irqsave(&il->lock, flags);
3252 if (!(il->measurement_status & MEASUREMENT_READY)) {
3253 spin_unlock_irqrestore(&il->lock, flags);
3254 return 0;
3255 }
3256 memcpy(&measure_report, &il->measure_report, size);
3257 il->measurement_status = 0;
3258 spin_unlock_irqrestore(&il->lock, flags);
3259
3260 while (size && PAGE_SIZE - len) {
3261 hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
3262 PAGE_SIZE - len, true);
3263 len = strlen(buf);
3264 if (PAGE_SIZE - len)
3265 buf[len++] = '\n';
3266
3267 ofs += 16;
3268 size -= min(size, 16U);
3269 }
3270
3271 return len;
3272}
3273
3274static ssize_t
3275il3945_store_measurement(struct device *d, struct device_attribute *attr,
3276 const char *buf, size_t count)
3277{
3278 struct il_priv *il = dev_get_drvdata(d);
3279 struct ieee80211_measurement_params params = {
3280 .channel = le16_to_cpu(il->active.channel),
3281 .start_time = cpu_to_le64(il->_3945.last_tsf),
3282 .duration = cpu_to_le16(1),
3283 };
3284 u8 type = IL_MEASURE_BASIC;
3285 u8 buffer[32];
3286 u8 channel;
3287
3288 if (count) {
3289 char *p = buffer;
3290 strlcpy(buffer, buf, sizeof(buffer));
3291 channel = simple_strtoul(p, NULL, 0);
3292 if (channel)
3293 params.channel = channel;
3294
3295 p = buffer;
3296 while (*p && *p != ' ')
3297 p++;
3298 if (*p)
3299 type = simple_strtoul(p + 1, NULL, 0);
3300 }
3301
3302 D_INFO("Invoking measurement of type %d on " "channel %d (for '%s')\n",
3303 type, params.channel, buf);
3304 il3945_get_measurement(il, ¶ms, type);
3305
3306 return count;
3307}
3308
3309static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR, il3945_show_measurement,
3310 il3945_store_measurement);
3311
3312static ssize_t
3313il3945_store_retry_rate(struct device *d, struct device_attribute *attr,
3314 const char *buf, size_t count)
3315{
3316 struct il_priv *il = dev_get_drvdata(d);
3317
3318 il->retry_rate = simple_strtoul(buf, NULL, 0);
3319 if (il->retry_rate <= 0)
3320 il->retry_rate = 1;
3321
3322 return count;
3323}
3324
3325static ssize_t
3326il3945_show_retry_rate(struct device *d, struct device_attribute *attr,
3327 char *buf)
3328{
3329 struct il_priv *il = dev_get_drvdata(d);
3330 return sprintf(buf, "%d", il->retry_rate);
3331}
3332
3333static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, il3945_show_retry_rate,
3334 il3945_store_retry_rate);
3335
3336static ssize_t
3337il3945_show_channels(struct device *d, struct device_attribute *attr, char *buf)
3338{
3339 /* all this shit doesn't belong into sysfs anyway */
3340 return 0;
3341}
3342
3343static DEVICE_ATTR(channels, S_IRUSR, il3945_show_channels, NULL);
3344
3345static ssize_t
3346il3945_show_antenna(struct device *d, struct device_attribute *attr, char *buf)
3347{
3348 struct il_priv *il = dev_get_drvdata(d);
3349
3350 if (!il_is_alive(il))
3351 return -EAGAIN;
3352
3353 return sprintf(buf, "%d\n", il3945_mod_params.antenna);
3354}
3355
3356static ssize_t
3357il3945_store_antenna(struct device *d, struct device_attribute *attr,
3358 const char *buf, size_t count)
3359{
3360 struct il_priv *il __maybe_unused = dev_get_drvdata(d);
3361 int ant;
3362
3363 if (count == 0)
3364 return 0;
3365
3366 if (sscanf(buf, "%1i", &ant) != 1) {
3367 D_INFO("not in hex or decimal form.\n");
3368 return count;
3369 }
3370
3371 if (ant >= 0 && ant <= 2) {
3372 D_INFO("Setting antenna select to %d.\n", ant);
3373 il3945_mod_params.antenna = (enum il3945_antenna)ant;
3374 } else
3375 D_INFO("Bad antenna select value %d.\n", ant);
3376
3377 return count;
3378}
3379
3380static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, il3945_show_antenna,
3381 il3945_store_antenna);
3382
3383static ssize_t
3384il3945_show_status(struct device *d, struct device_attribute *attr, char *buf)
3385{
3386 struct il_priv *il = dev_get_drvdata(d);
3387 if (!il_is_alive(il))
3388 return -EAGAIN;
3389 return sprintf(buf, "0x%08x\n", (int)il->status);
3390}
3391
3392static DEVICE_ATTR(status, S_IRUGO, il3945_show_status, NULL);
3393
3394static ssize_t
3395il3945_dump_error_log(struct device *d, struct device_attribute *attr,
3396 const char *buf, size_t count)
3397{
3398 struct il_priv *il = dev_get_drvdata(d);
3399 char *p = (char *)buf;
3400
3401 if (p[0] == '1')
3402 il3945_dump_nic_error_log(il);
3403
3404 return strnlen(buf, count);
3405}
3406
3407static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, il3945_dump_error_log);
3408
3409/*****************************************************************************
3410 *
3411 * driver setup and tear down
3412 *
3413 *****************************************************************************/
3414
3415static void
3416il3945_setup_deferred_work(struct il_priv *il)
3417{
3418 il->workqueue = create_singlethread_workqueue(DRV_NAME);
3419
3420 init_waitqueue_head(&il->wait_command_queue);
3421
3422 INIT_WORK(&il->restart, il3945_bg_restart);
3423 INIT_WORK(&il->rx_replenish, il3945_bg_rx_replenish);
3424 INIT_DELAYED_WORK(&il->init_alive_start, il3945_bg_init_alive_start);
3425 INIT_DELAYED_WORK(&il->alive_start, il3945_bg_alive_start);
3426 INIT_DELAYED_WORK(&il->_3945.rfkill_poll, il3945_rfkill_poll);
3427
3428 il_setup_scan_deferred_work(il);
3429
3430 il3945_hw_setup_deferred_work(il);
3431
3432 setup_timer(&il->watchdog, il_bg_watchdog, (unsigned long)il);
3433
3434 tasklet_init(&il->irq_tasklet,
3435 (void (*)(unsigned long))il3945_irq_tasklet,
3436 (unsigned long)il);
3437}
3438
3439static void
3440il3945_cancel_deferred_work(struct il_priv *il)
3441{
3442 il3945_hw_cancel_deferred_work(il);
3443
3444 cancel_delayed_work_sync(&il->init_alive_start);
3445 cancel_delayed_work(&il->alive_start);
3446
3447 il_cancel_scan_deferred_work(il);
3448}
3449
3450static struct attribute *il3945_sysfs_entries[] = {
3451 &dev_attr_antenna.attr,
3452 &dev_attr_channels.attr,
3453 &dev_attr_dump_errors.attr,
3454 &dev_attr_flags.attr,
3455 &dev_attr_filter_flags.attr,
3456 &dev_attr_measurement.attr,
3457 &dev_attr_retry_rate.attr,
3458 &dev_attr_status.attr,
3459 &dev_attr_temperature.attr,
3460 &dev_attr_tx_power.attr,
3461#ifdef CONFIG_IWLEGACY_DEBUG
3462 &dev_attr_debug_level.attr,
3463#endif
3464 NULL
3465};
3466
3467static struct attribute_group il3945_attribute_group = {
3468 .name = NULL, /* put in device directory */
3469 .attrs = il3945_sysfs_entries,
3470};
3471
3472static struct ieee80211_ops il3945_mac_ops __read_mostly = {
3473 .tx = il3945_mac_tx,
3474 .start = il3945_mac_start,
3475 .stop = il3945_mac_stop,
3476 .add_interface = il_mac_add_interface,
3477 .remove_interface = il_mac_remove_interface,
3478 .change_interface = il_mac_change_interface,
3479 .config = il_mac_config,
3480 .configure_filter = il3945_configure_filter,
3481 .set_key = il3945_mac_set_key,
3482 .conf_tx = il_mac_conf_tx,
3483 .reset_tsf = il_mac_reset_tsf,
3484 .bss_info_changed = il_mac_bss_info_changed,
3485 .hw_scan = il_mac_hw_scan,
3486 .sta_add = il3945_mac_sta_add,
3487 .sta_remove = il_mac_sta_remove,
3488 .tx_last_beacon = il_mac_tx_last_beacon,
3489 .flush = il_mac_flush,
3490};
3491
3492static int
3493il3945_init_drv(struct il_priv *il)
3494{
3495 int ret;
3496 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
3497
3498 il->retry_rate = 1;
3499 il->beacon_skb = NULL;
3500
3501 spin_lock_init(&il->sta_lock);
3502 spin_lock_init(&il->hcmd_lock);
3503
3504 INIT_LIST_HEAD(&il->free_frames);
3505
3506 mutex_init(&il->mutex);
3507
3508 il->ieee_channels = NULL;
3509 il->ieee_rates = NULL;
3510 il->band = IEEE80211_BAND_2GHZ;
3511
3512 il->iw_mode = NL80211_IFTYPE_STATION;
3513 il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;
3514
3515 /* initialize force reset */
3516 il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;
3517
3518 if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
3519 IL_WARN("Unsupported EEPROM version: 0x%04X\n",
3520 eeprom->version);
3521 ret = -EINVAL;
3522 goto err;
3523 }
3524 ret = il_init_channel_map(il);
3525 if (ret) {
3526 IL_ERR("initializing regulatory failed: %d\n", ret);
3527 goto err;
3528 }
3529
3530 /* Set up txpower settings in driver for all channels */
3531 if (il3945_txpower_set_from_eeprom(il)) {
3532 ret = -EIO;
3533 goto err_free_channel_map;
3534 }
3535
3536 ret = il_init_geos(il);
3537 if (ret) {
3538 IL_ERR("initializing geos failed: %d\n", ret);
3539 goto err_free_channel_map;
3540 }
3541 il3945_init_hw_rates(il, il->ieee_rates);
3542
3543 return 0;
3544
3545err_free_channel_map:
3546 il_free_channel_map(il);
3547err:
3548 return ret;
3549}
3550
3551#define IL3945_MAX_PROBE_REQUEST 200
3552
3553static int
3554il3945_setup_mac(struct il_priv *il)
3555{
3556 int ret;
3557 struct ieee80211_hw *hw = il->hw;
3558
3559 hw->rate_control_algorithm = "iwl-3945-rs";
3560 hw->sta_data_size = sizeof(struct il3945_sta_priv);
3561 hw->vif_data_size = sizeof(struct il_vif_priv);
3562
3563 /* Tell mac80211 our characteristics */
3564 ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS);
3565 ieee80211_hw_set(hw, SUPPORTS_PS);
3566 ieee80211_hw_set(hw, SIGNAL_DBM);
3567 ieee80211_hw_set(hw, SPECTRUM_MGMT);
3568
3569 hw->wiphy->interface_modes =
3570 BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
3571
3572 hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
3573 hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
3574 REGULATORY_DISABLE_BEACON_HINTS;
3575
3576 hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
3577
3578 hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
3579 /* we create the 802.11 header and a zero-length SSID element */
3580 hw->wiphy->max_scan_ie_len = IL3945_MAX_PROBE_REQUEST - 24 - 2;
3581
3582 /* Default value; 4 EDCA QOS priorities */
3583 hw->queues = 4;
3584
3585 if (il->bands[IEEE80211_BAND_2GHZ].n_channels)
3586 il->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
3587 &il->bands[IEEE80211_BAND_2GHZ];
3588
3589 if (il->bands[IEEE80211_BAND_5GHZ].n_channels)
3590 il->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
3591 &il->bands[IEEE80211_BAND_5GHZ];
3592
3593 il_leds_init(il);
3594
3595 ret = ieee80211_register_hw(il->hw);
3596 if (ret) {
3597 IL_ERR("Failed to register hw (error %d)\n", ret);
3598 return ret;
3599 }
3600 il->mac80211_registered = 1;
3601
3602 return 0;
3603}
3604
3605static int
3606il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3607{
3608 int err = 0;
3609 struct il_priv *il;
3610 struct ieee80211_hw *hw;
3611 struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
3612 struct il3945_eeprom *eeprom;
3613 unsigned long flags;
3614
3615 /***********************
3616 * 1. Allocating HW data
3617 * ********************/
3618
3619 hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il3945_mac_ops);
3620 if (!hw) {
3621 err = -ENOMEM;
3622 goto out;
3623 }
3624 il = hw->priv;
3625 il->hw = hw;
3626 SET_IEEE80211_DEV(hw, &pdev->dev);
3627
3628 il->cmd_queue = IL39_CMD_QUEUE_NUM;
3629
3630 /*
3631 * Disabling hardware scan means that mac80211 will perform scans
3632 * "the hard way", rather than using device's scan.
3633 */
3634 if (il3945_mod_params.disable_hw_scan) {
3635 D_INFO("Disabling hw_scan\n");
3636 il3945_mac_ops.hw_scan = NULL;
3637 }
3638
3639 D_INFO("*** LOAD DRIVER ***\n");
3640 il->cfg = cfg;
3641 il->ops = &il3945_ops;
3642#ifdef CONFIG_IWLEGACY_DEBUGFS
3643 il->debugfs_ops = &il3945_debugfs_ops;
3644#endif
3645 il->pci_dev = pdev;
3646 il->inta_mask = CSR_INI_SET_MASK;
3647
3648 /***************************
3649 * 2. Initializing PCI bus
3650 * *************************/
3651 pci_disable_link_state(pdev,
3652 PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
3653 PCIE_LINK_STATE_CLKPM);
3654
3655 if (pci_enable_device(pdev)) {
3656 err = -ENODEV;
3657 goto out_ieee80211_free_hw;
3658 }
3659
3660 pci_set_master(pdev);
3661
3662 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3663 if (!err)
3664 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
3665 if (err) {
3666 IL_WARN("No suitable DMA available.\n");
3667 goto out_pci_disable_device;
3668 }
3669
3670 pci_set_drvdata(pdev, il);
3671 err = pci_request_regions(pdev, DRV_NAME);
3672 if (err)
3673 goto out_pci_disable_device;
3674
3675 /***********************
3676 * 3. Read REV Register
3677 * ********************/
3678 il->hw_base = pci_ioremap_bar(pdev, 0);
3679 if (!il->hw_base) {
3680 err = -ENODEV;
3681 goto out_pci_release_regions;
3682 }
3683
3684 D_INFO("pci_resource_len = 0x%08llx\n",
3685 (unsigned long long)pci_resource_len(pdev, 0));
3686 D_INFO("pci_resource_base = %p\n", il->hw_base);
3687
3688 /* We disable the RETRY_TIMEOUT register (0x41) to keep
3689 * PCI Tx retries from interfering with C3 CPU state */
3690 pci_write_config_byte(pdev, 0x41, 0x00);
3691
3692 /* these spin locks will be used in apm_init and EEPROM access
3693 * we should init now
3694 */
3695 spin_lock_init(&il->reg_lock);
3696 spin_lock_init(&il->lock);
3697
3698 /*
3699 * stop and reset the on-board processor just in case it is in a
3700 * strange state ... like being left stranded by a primary kernel
3701 * and this is now the kdump kernel trying to start up
3702 */
3703 _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
3704
3705 /***********************
3706 * 4. Read EEPROM
3707 * ********************/
3708
3709 /* Read the EEPROM */
3710 err = il_eeprom_init(il);
3711 if (err) {
3712 IL_ERR("Unable to init EEPROM\n");
3713 goto out_iounmap;
3714 }
3715 /* MAC Address location in EEPROM same for 3945/4965 */
3716 eeprom = (struct il3945_eeprom *)il->eeprom;
3717 D_INFO("MAC address: %pM\n", eeprom->mac_address);
3718 SET_IEEE80211_PERM_ADDR(il->hw, eeprom->mac_address);
3719
3720 /***********************
3721 * 5. Setup HW Constants
3722 * ********************/
3723 /* Device-specific setup */
3724 err = il3945_hw_set_hw_params(il);
3725 if (err) {
3726 IL_ERR("failed to set hw settings\n");
3727 goto out_eeprom_free;
3728 }
3729
3730 /***********************
3731 * 6. Setup il
3732 * ********************/
3733
3734 err = il3945_init_drv(il);
3735 if (err) {
3736 IL_ERR("initializing driver failed\n");
3737 goto out_unset_hw_params;
3738 }
3739
3740 IL_INFO("Detected Intel Wireless WiFi Link %s\n", il->cfg->name);
3741
3742 /***********************
3743 * 7. Setup Services
3744 * ********************/
3745
3746 spin_lock_irqsave(&il->lock, flags);
3747 il_disable_interrupts(il);
3748 spin_unlock_irqrestore(&il->lock, flags);
3749
3750 pci_enable_msi(il->pci_dev);
3751
3752 err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il);
3753 if (err) {
3754 IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
3755 goto out_disable_msi;
3756 }
3757
3758 err = sysfs_create_group(&pdev->dev.kobj, &il3945_attribute_group);
3759 if (err) {
3760 IL_ERR("failed to create sysfs device attributes\n");
3761 goto out_release_irq;
3762 }
3763
3764 il_set_rxon_channel(il, &il->bands[IEEE80211_BAND_2GHZ].channels[5]);
3765 il3945_setup_deferred_work(il);
3766 il3945_setup_handlers(il);
3767 il_power_initialize(il);
3768
3769 /*********************************
3770 * 8. Setup and Register mac80211
3771 * *******************************/
3772
3773 il_enable_interrupts(il);
3774
3775 err = il3945_setup_mac(il);
3776 if (err)
3777 goto out_remove_sysfs;
3778
3779 err = il_dbgfs_register(il, DRV_NAME);
3780 if (err)
3781 IL_ERR("failed to create debugfs files. Ignoring error: %d\n",
3782 err);
3783
3784 /* Start monitoring the killswitch */
3785 queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll, 2 * HZ);
3786
3787 return 0;
3788
3789out_remove_sysfs:
3790 destroy_workqueue(il->workqueue);
3791 il->workqueue = NULL;
3792 sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
3793out_release_irq:
3794 free_irq(il->pci_dev->irq, il);
3795out_disable_msi:
3796 pci_disable_msi(il->pci_dev);
3797 il_free_geos(il);
3798 il_free_channel_map(il);
3799out_unset_hw_params:
3800 il3945_unset_hw_params(il);
3801out_eeprom_free:
3802 il_eeprom_free(il);
3803out_iounmap:
3804 iounmap(il->hw_base);
3805out_pci_release_regions:
3806 pci_release_regions(pdev);
3807out_pci_disable_device:
3808 pci_disable_device(pdev);
3809out_ieee80211_free_hw:
3810 ieee80211_free_hw(il->hw);
3811out:
3812 return err;
3813}
3814
3815static void
3816il3945_pci_remove(struct pci_dev *pdev)
3817{
3818 struct il_priv *il = pci_get_drvdata(pdev);
3819 unsigned long flags;
3820
3821 if (!il)
3822 return;
3823
3824 D_INFO("*** UNLOAD DRIVER ***\n");
3825
3826 il_dbgfs_unregister(il);
3827
3828 set_bit(S_EXIT_PENDING, &il->status);
3829
3830 il_leds_exit(il);
3831
3832 if (il->mac80211_registered) {
3833 ieee80211_unregister_hw(il->hw);
3834 il->mac80211_registered = 0;
3835 } else {
3836 il3945_down(il);
3837 }
3838
3839 /*
3840 * Make sure device is reset to low power before unloading driver.
3841 * This may be redundant with il_down(), but there are paths to
3842 * run il_down() without calling apm_ops.stop(), and there are
3843 * paths to avoid running il_down() at all before leaving driver.
3844 * This (inexpensive) call *makes sure* device is reset.
3845 */
3846 il_apm_stop(il);
3847
3848 /* make sure we flush any pending irq or
3849 * tasklet for the driver
3850 */
3851 spin_lock_irqsave(&il->lock, flags);
3852 il_disable_interrupts(il);
3853 spin_unlock_irqrestore(&il->lock, flags);
3854
3855 il3945_synchronize_irq(il);
3856
3857 sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
3858
3859 cancel_delayed_work_sync(&il->_3945.rfkill_poll);
3860
3861 il3945_dealloc_ucode_pci(il);
3862
3863 if (il->rxq.bd)
3864 il3945_rx_queue_free(il, &il->rxq);
3865 il3945_hw_txq_ctx_free(il);
3866
3867 il3945_unset_hw_params(il);
3868
3869 /*netif_stop_queue(dev); */
3870 flush_workqueue(il->workqueue);
3871
3872 /* ieee80211_unregister_hw calls il3945_mac_stop, which flushes
3873 * il->workqueue... so we can't take down the workqueue
3874 * until now... */
3875 destroy_workqueue(il->workqueue);
3876 il->workqueue = NULL;
3877
3878 free_irq(pdev->irq, il);
3879 pci_disable_msi(pdev);
3880
3881 iounmap(il->hw_base);
3882 pci_release_regions(pdev);
3883 pci_disable_device(pdev);
3884
3885 il_free_channel_map(il);
3886 il_free_geos(il);
3887 kfree(il->scan_cmd);
3888 if (il->beacon_skb)
3889 dev_kfree_skb(il->beacon_skb);
3890
3891 ieee80211_free_hw(il->hw);
3892}
3893
3894/*****************************************************************************
3895 *
3896 * driver and module entry point
3897 *
3898 *****************************************************************************/
3899
3900static struct pci_driver il3945_driver = {
3901 .name = DRV_NAME,
3902 .id_table = il3945_hw_card_ids,
3903 .probe = il3945_pci_probe,
3904 .remove = il3945_pci_remove,
3905 .driver.pm = IL_LEGACY_PM_OPS,
3906};
3907
3908static int __init
3909il3945_init(void)
3910{
3911
3912 int ret;
3913 pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
3914 pr_info(DRV_COPYRIGHT "\n");
3915
3916 ret = il3945_rate_control_register();
3917 if (ret) {
3918 pr_err("Unable to register rate control algorithm: %d\n", ret);
3919 return ret;
3920 }
3921
3922 ret = pci_register_driver(&il3945_driver);
3923 if (ret) {
3924 pr_err("Unable to initialize PCI module\n");
3925 goto error_register;
3926 }
3927
3928 return ret;
3929
3930error_register:
3931 il3945_rate_control_unregister();
3932 return ret;
3933}
3934
3935static void __exit
3936il3945_exit(void)
3937{
3938 pci_unregister_driver(&il3945_driver);
3939 il3945_rate_control_unregister();
3940}
3941
3942MODULE_FIRMWARE(IL3945_MODULE_FIRMWARE(IL3945_UCODE_API_MAX));
3943
3944module_param_named(antenna, il3945_mod_params.antenna, int, S_IRUGO);
3945MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
3946module_param_named(swcrypto, il3945_mod_params.sw_crypto, int, S_IRUGO);
3947MODULE_PARM_DESC(swcrypto, "using software crypto (default 1 [software])");
3948module_param_named(disable_hw_scan, il3945_mod_params.disable_hw_scan, int,
3949 S_IRUGO);
3950MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)");
3951#ifdef CONFIG_IWLEGACY_DEBUG
3952module_param_named(debug, il_debug_level, uint, S_IRUGO | S_IWUSR);
3953MODULE_PARM_DESC(debug, "debug output mask");
3954#endif
3955module_param_named(fw_restart, il3945_mod_params.restart_fw, int, S_IRUGO);
3956MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
3957
3958module_exit(il3945_exit);
3959module_init(il3945_init);