1# SPDX-License-Identifier: GPL-2.0-only
 2#
 3# D-Link device configuration
 4#
 5
 6config NET_VENDOR_DLINK
 7	bool "D-Link devices"
 8	default y
 9	depends on PCI
10	help
11	  If you have a network (Ethernet) card belonging to this class, say Y.
12
13	  Note that the answer to this question doesn't directly affect the
14	  kernel: saying N will just cause the configurator to skip all
15	  the questions about D-Link devices. If you say Y, you will be asked for
16	  your specific card in the following questions.
17
18if NET_VENDOR_DLINK
19
20config DL2K
21	tristate "DL2000/TC902x/IP1000A-based Gigabit Ethernet support"
22	depends on PCI
23	select CRC32
24	help
25	  This driver supports DL2000/TC902x/IP1000A-based Gigabit ethernet cards,
26	  which includes
27	  D-Link DGE-550T Gigabit Ethernet Adapter.
28	  D-Link DL2000-based Gigabit Ethernet Adapter.
29	  Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
30	  ICPlus IP1000A-based cards
31
32	  To compile this driver as a module, choose M here: the
33	  module will be called dl2k.
34
35config SUNDANCE
36	tristate "Sundance Alta support"
37	depends on PCI
38	select CRC32
39	select MII
40	help
41	  This driver is for the Sundance "Alta" chip.
42	  More specific information and updates are available from
43	  <http://www.scyld.com/network/sundance.html>.
44
45config SUNDANCE_MMIO
46	bool "Use MMIO instead of PIO"
47	depends on SUNDANCE
48	help
49	  Enable memory-mapped I/O for interaction with Sundance NIC registers.
50	  Do NOT enable this by default, PIO (enabled when MMIO is disabled)
51	  is known to solve bugs on certain chips.
52
53	  If unsure, say N.
54
55endif # NET_VENDOR_DLINK

 
 1#
 2# D-Link device configuration
 3#
 4
 5config NET_VENDOR_DLINK
 6	bool "D-Link devices"
 7	default y
 8	depends on PCI
 9	---help---
10	  If you have a network (Ethernet) card belonging to this class, say Y.
11
12	  Note that the answer to this question doesn't directly affect the
13	  kernel: saying N will just cause the configurator to skip all
14	  the questions about D-Link devices. If you say Y, you will be asked for
15	  your specific card in the following questions.
16
17if NET_VENDOR_DLINK
18
19config DL2K
20	tristate "DL2000/TC902x/IP1000A-based Gigabit Ethernet support"
21	depends on PCI
22	select CRC32
23	---help---
24	  This driver supports DL2000/TC902x/IP1000A-based Gigabit ethernet cards,
25	  which includes
26	  D-Link DGE-550T Gigabit Ethernet Adapter.
27	  D-Link DL2000-based Gigabit Ethernet Adapter.
28	  Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
29	  ICPlus IP1000A-based cards
30
31	  To compile this driver as a module, choose M here: the
32	  module will be called dl2k.
33
34config SUNDANCE
35	tristate "Sundance Alta support"
36	depends on PCI
37	select CRC32
38	select MII
39	---help---
40	  This driver is for the Sundance "Alta" chip.
41	  More specific information and updates are available from
42	  <http://www.scyld.com/network/sundance.html>.
43
44config SUNDANCE_MMIO
45	bool "Use MMIO instead of PIO"
46	depends on SUNDANCE
47	---help---
48	  Enable memory-mapped I/O for interaction with Sundance NIC registers.
49	  Do NOT enable this by default, PIO (enabled when MMIO is disabled)
50	  is known to solve bugs on certain chips.
51
52	  If unsure, say N.
53
54endif # NET_VENDOR_DLINK