Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# 8390 device configuration
4#
5
6config NET_VENDOR_8390
7 bool "National Semiconductor 8390 devices"
8 default y
9 depends on NET_VENDOR_NATSEMI
10 help
11 If you have a network (Ethernet) card belonging to this class, say Y.
12
13 Note that the answer to this question doesn't directly affect the
14 kernel: saying N will just cause the configurator to skip all
15 the questions about National Semiconductor 8390 cards. If you say Y,
16 you will be asked for your specific card in the following questions.
17
18if NET_VENDOR_8390
19
20config PCMCIA_AXNET
21 tristate "Asix AX88190 PCMCIA support"
22 depends on PCMCIA
23 help
24 Say Y here if you intend to attach an Asix AX88190-based PCMCIA
25 (PC-card) Fast Ethernet card to your computer. These cards are
26 nearly NE2000 compatible but need a separate driver due to a few
27 misfeatures.
28
29 To compile this driver as a module, choose M here: the module will be
30 called axnet_cs. If unsure, say N.
31
32config AX88796
33 tristate "ASIX AX88796 NE2000 clone support" if !ZORRO
34 depends on (ARM || MIPS || SUPERH || ZORRO || COMPILE_TEST)
35 select CRC32
36 select PHYLIB
37 select MDIO_BITBANG
38 help
39 AX88796 driver, using platform bus to provide
40 chip detection and resources
41
42config AX88796_93CX6
43 bool "ASIX AX88796 external 93CX6 eeprom support"
44 depends on AX88796
45 select EEPROM_93CX6
46 help
47 Select this if your platform comes with an external 93CX6 eeprom.
48
49config XSURF100
50 tristate "Amiga XSurf 100 AX88796/NE2000 clone support"
51 depends on ZORRO
52 select AX88796
53 select AX88796B_PHY
54 help
55 This driver is for the Individual Computers X-Surf 100 Ethernet
56 card (based on the Asix AX88796 chip). If you have such a card,
57 say Y. Otherwise, say N.
58
59 To compile this driver as a module, choose M here: the module
60 will be called xsurf100.
61
62config HYDRA
63 tristate "Hydra support"
64 depends on ZORRO
65 select CRC32
66 help
67 If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
68
69 To compile this driver as a module, choose M here: the module
70 will be called hydra.
71
72config ARM_ETHERH
73 tristate "I-cubed EtherH/ANT EtherM support"
74 depends on ARM && ARCH_ACORN
75 select CRC32
76 help
77 If you have an Acorn system with one of these network cards, you
78 should say Y to this option if you wish to use it with Linux.
79
80config MAC8390
81 tristate "Macintosh NS 8390 based ethernet cards"
82 depends on MAC
83 select CRC32
84 help
85 If you want to include a driver to support Nubus or LC-PDS
86 Ethernet cards using an NS8390 chipset or its equivalent, say Y.
87
88config MCF8390
89 tristate "ColdFire NS8390 based Ethernet support"
90 depends on COLDFIRE
91 select CRC32
92 help
93 This driver is for Ethernet devices using an NS8390-compatible
94 chipset on many common ColdFire CPU based boards. Many of the older
95 Freescale dev boards use this, and some other common boards like
96 some SnapGear routers do as well.
97
98 If you have one of these boards and want to use the network interface
99 on them then choose Y. To compile this driver as a module, choose M
100 here, the module will be called mcf8390.
101
102config NE2000
103 tristate "NE2000/NE1000 support"
104 depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC)
105 select NETDEV_LEGACY_INIT if ISA
106 select CRC32
107 help
108 If you have a network (Ethernet) card of this type, say Y here.
109 Many Ethernet cards without a specific driver are compatible with
110 the NE2000.
111
112 If you have a PCI NE2000 card however, say N here and Y to "PCI
113 NE2000 and clone support" below.
114
115 To compile this driver as a module, choose M here. The module
116 will be called ne.
117
118config NE2K_PCI
119 tristate "PCI NE2000 and clones support (see help)"
120 depends on PCI
121 select CRC32
122 help
123 This driver is for NE2000 compatible PCI cards. It will not work
124 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
125 support" below). If you have a PCI NE2000 network (Ethernet) card,
126 say Y here.
127
128 This driver also works for the following NE2000 clone cards:
129 RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
130 NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
131 Holtek HT80232 Holtek HT80229
132
133 To compile this driver as a module, choose M here. The module
134 will be called ne2k-pci.
135
136config APNE
137 tristate "PCMCIA NE2000 support"
138 depends on AMIGA_PCMCIA
139 select CRC32
140 help
141 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
142 say N.
143
144 To compile this driver as a module, choose M here: the module
145 will be called apne.
146
147config PCMCIA_PCNET
148 tristate "NE2000 compatible PCMCIA support"
149 depends on PCMCIA
150 select CRC32
151 help
152 Say Y here if you intend to attach an NE2000 compatible PCMCIA
153 (PC-card) Ethernet or Fast Ethernet card to your computer.
154
155 To compile this driver as a module, choose M here: the module will be
156 called pcnet_cs. If unsure, say N.
157
158config STNIC
159 tristate "National DP83902AV support"
160 depends on SUPERH
161 select CRC32
162 help
163 Support for cards based on the National Semiconductor DP83902AV
164 ST-NIC Serial Network Interface Controller for Twisted Pair. This
165 is a 10Mbit/sec Ethernet controller. Product overview and specs at
166 <http://www.national.com/pf/DP/DP83902A.html>.
167
168 If unsure, say N.
169
170config ULTRA
171 tristate "SMC Ultra support"
172 depends on ISA
173 select NETDEV_LEGACY_INIT
174 select CRC32
175 help
176 If you have a network (Ethernet) card of this type, say Y here.
177
178 Important: There have been many reports that, with some motherboards
179 mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
180 such as some BusLogic models) causes corruption problems with many
181 operating systems. The Linux smc-ultra driver has a work-around for
182 this but keep it in mind if you have such a SCSI card and have
183 problems.
184
185 To compile this driver as a module, choose M here. The module
186 will be called smc-ultra.
187
188config WD80x3
189 tristate "WD80*3 support"
190 depends on ISA
191 select NETDEV_LEGACY_INIT
192 select CRC32
193 help
194 If you have a network (Ethernet) card of this type, say Y here.
195
196 To compile this driver as a module, choose M here. The module
197 will be called wd.
198
199config ZORRO8390
200 tristate "Zorro NS8390-based Ethernet support"
201 depends on ZORRO
202 select CRC32
203 help
204 This driver is for Zorro Ethernet cards using an NS8390-compatible
205 chipset, like the Village Tronic Ariadne II and the Individual
206 Computers X-Surf Ethernet cards. If you have such a card, say Y.
207 Otherwise, say N.
208
209 To compile this driver as a module, choose M here: the module
210 will be called zorro8390.
211
212endif # NET_VENDOR_8390
1#
2# 8390 device configuration
3#
4
5config NET_VENDOR_8390
6 bool "National Semi-conductor 8390 devices"
7 default y
8 depends on NET_VENDOR_NATSEMI
9 ---help---
10 If you have a network (Ethernet) card belonging to this class, say Y.
11
12 Note that the answer to this question doesn't directly affect the
13 kernel: saying N will just cause the configurator to skip all
14 the questions about Western Digital cards. If you say Y, you will be
15 asked for your specific card in the following questions.
16
17if NET_VENDOR_8390
18
19config PCMCIA_AXNET
20 tristate "Asix AX88190 PCMCIA support"
21 depends on PCMCIA
22 ---help---
23 Say Y here if you intend to attach an Asix AX88190-based PCMCIA
24 (PC-card) Fast Ethernet card to your computer. These cards are
25 nearly NE2000 compatible but need a separate driver due to a few
26 misfeatures.
27
28 To compile this driver as a module, choose M here: the module will be
29 called axnet_cs. If unsure, say N.
30
31config AX88796
32 tristate "ASIX AX88796 NE2000 clone support"
33 depends on (ARM || MIPS || SUPERH)
34 select CRC32
35 select PHYLIB
36 select MDIO_BITBANG
37 ---help---
38 AX88796 driver, using platform bus to provide
39 chip detection and resources
40
41config AX88796_93CX6
42 bool "ASIX AX88796 external 93CX6 eeprom support"
43 depends on AX88796
44 select EEPROM_93CX6
45 ---help---
46 Select this if your platform comes with an external 93CX6 eeprom.
47
48config HYDRA
49 tristate "Hydra support"
50 depends on ZORRO
51 select CRC32
52 ---help---
53 If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
54
55 To compile this driver as a module, choose M here: the module
56 will be called hydra.
57
58config ARM_ETHERH
59 tristate "I-cubed EtherH/ANT EtherM support"
60 depends on ARM && ARCH_ACORN
61 select CRC32
62 ---help---
63 If you have an Acorn system with one of these network cards, you
64 should say Y to this option if you wish to use it with Linux.
65
66config MAC8390
67 tristate "Macintosh NS 8390 based ethernet cards"
68 depends on MAC
69 select CRC32
70 ---help---
71 If you want to include a driver to support Nubus or LC-PDS
72 Ethernet cards using an NS8390 chipset or its equivalent, say Y.
73
74config MCF8390
75 tristate "ColdFire NS8390 based Ethernet support"
76 depends on COLDFIRE
77 select CRC32
78 ---help---
79 This driver is for Ethernet devices using an NS8390-compatible
80 chipset on many common ColdFire CPU based boards. Many of the older
81 Freescale dev boards use this, and some other common boards like
82 some SnapGear routers do as well.
83
84 If you have one of these boards and want to use the network interface
85 on them then choose Y. To compile this driver as a module, choose M
86 here, the module will be called mcf8390.
87
88config NE2000
89 tristate "NE2000/NE1000 support"
90 depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX || \
91 ATARI_ETHERNEC)
92 select CRC32
93 ---help---
94 If you have a network (Ethernet) card of this type, say Y here.
95 Many Ethernet cards without a specific driver are compatible with
96 the NE2000.
97
98 If you have a PCI NE2000 card however, say N here and Y to "PCI
99 NE2000 and clone support" below.
100
101 To compile this driver as a module, choose M here. The module
102 will be called ne.
103
104config NE2K_PCI
105 tristate "PCI NE2000 and clones support (see help)"
106 depends on PCI
107 select CRC32
108 ---help---
109 This driver is for NE2000 compatible PCI cards. It will not work
110 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
111 support" below). If you have a PCI NE2000 network (Ethernet) card,
112 say Y here.
113
114 This driver also works for the following NE2000 clone cards:
115 RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
116 NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
117 Holtek HT80232 Holtek HT80229
118
119 To compile this driver as a module, choose M here. The module
120 will be called ne2k-pci.
121
122config APNE
123 tristate "PCMCIA NE2000 support"
124 depends on AMIGA_PCMCIA
125 select CRC32
126 ---help---
127 If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
128 say N.
129
130 To compile this driver as a module, choose M here: the module
131 will be called apne.
132
133config PCMCIA_PCNET
134 tristate "NE2000 compatible PCMCIA support"
135 depends on PCMCIA
136 select CRC32
137 ---help---
138 Say Y here if you intend to attach an NE2000 compatible PCMCIA
139 (PC-card) Ethernet or Fast Ethernet card to your computer.
140
141 To compile this driver as a module, choose M here: the module will be
142 called pcnet_cs. If unsure, say N.
143
144config STNIC
145 tristate "National DP83902AV support"
146 depends on SUPERH
147 select CRC32
148 ---help---
149 Support for cards based on the National Semiconductor DP83902AV
150 ST-NIC Serial Network Interface Controller for Twisted Pair. This
151 is a 10Mbit/sec Ethernet controller. Product overview and specs at
152 <http://www.national.com/pf/DP/DP83902A.html>.
153
154 If unsure, say N.
155
156config ULTRA
157 tristate "SMC Ultra support"
158 depends on ISA
159 select CRC32
160 ---help---
161 If you have a network (Ethernet) card of this type, say Y here.
162
163 Important: There have been many reports that, with some motherboards
164 mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
165 such as some BusLogic models) causes corruption problems with many
166 operating systems. The Linux smc-ultra driver has a work-around for
167 this but keep it in mind if you have such a SCSI card and have
168 problems.
169
170 To compile this driver as a module, choose M here. The module
171 will be called smc-ultra.
172
173config WD80x3
174 tristate "WD80*3 support"
175 depends on ISA
176 select CRC32
177 ---help---
178 If you have a network (Ethernet) card of this type, say Y here.
179
180 To compile this driver as a module, choose M here. The module
181 will be called wd.
182
183config ZORRO8390
184 tristate "Zorro NS8390-based Ethernet support"
185 depends on ZORRO
186 select CRC32
187 ---help---
188 This driver is for Zorro Ethernet cards using an NS8390-compatible
189 chipset, like the Village Tronic Ariadne II and the Individual
190 Computers X-Surf Ethernet cards. If you have such a card, say Y.
191 Otherwise, say N.
192
193 To compile this driver as a module, choose M here: the module
194 will be called zorro8390.
195
196endif # NET_VENDOR_8390