Linux Audio

Check our new training course

Loading...
v6.8
  1// SPDX-License-Identifier: GPL-2.0-only
  2/* dummy.c: a dummy net driver
  3
  4	The purpose of this driver is to provide a device to point a
  5	route through, but not to actually transmit packets.
  6
  7	Why?  If you have a machine whose only connection is an occasional
  8	PPP/SLIP/PLIP link, you can only connect to your own hostname
  9	when the link is up.  Otherwise you have to use localhost.
 10	This isn't very consistent.
 11
 12	One solution is to set up a dummy link using PPP/SLIP/PLIP,
 13	but this seems (to me) too much overhead for too little gain.
 14	This driver provides a small alternative. Thus you can do
 15
 16	[when not running slip]
 17		ifconfig dummy slip.addr.ess.here up
 18	[to go to slip]
 19		ifconfig dummy down
 20		dip whatever
 21
 22	This was written by looking at Donald Becker's skeleton driver
 23	and the loopback driver.  I then threw away anything that didn't
 24	apply!	Thanks to Alan Cox for the key clue on what to do with
 25	misguided packets.
 26
 27			Nick Holloway, 27th May 1994
 28	[I tweaked this explanation a little but that's all]
 29			Alan Cox, 30th May 1994
 30*/
 31
 32#include <linux/module.h>
 33#include <linux/kernel.h>
 34#include <linux/netdevice.h>
 35#include <linux/etherdevice.h>
 36#include <linux/ethtool.h>
 37#include <linux/init.h>
 38#include <linux/moduleparam.h>
 39#include <linux/rtnetlink.h>
 40#include <linux/net_tstamp.h>
 41#include <net/rtnetlink.h>
 42#include <linux/u64_stats_sync.h>
 43
 44#define DRV_NAME	"dummy"
 
 45
 46static int numdummies = 1;
 47
 48/* fake multicast ability */
 49static void set_multicast_list(struct net_device *dev)
 50{
 51}
 52
 53static void dummy_get_stats64(struct net_device *dev,
 54			      struct rtnl_link_stats64 *stats)
 
 
 
 
 
 
 55{
 56	dev_lstats_read(dev, &stats->tx_packets, &stats->tx_bytes);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 57}
 58
 59static netdev_tx_t dummy_xmit(struct sk_buff *skb, struct net_device *dev)
 60{
 61	dev_lstats_add(dev, skb->len);
 
 
 
 
 
 62
 63	skb_tx_timestamp(skb);
 64	dev_kfree_skb(skb);
 65	return NETDEV_TX_OK;
 66}
 67
 68static int dummy_dev_init(struct net_device *dev)
 69{
 70	dev->lstats = netdev_alloc_pcpu_stats(struct pcpu_lstats);
 71	if (!dev->lstats)
 72		return -ENOMEM;
 73
 74	return 0;
 75}
 76
 77static void dummy_dev_uninit(struct net_device *dev)
 78{
 79	free_percpu(dev->lstats);
 80}
 81
 82static int dummy_change_carrier(struct net_device *dev, bool new_carrier)
 83{
 84	if (new_carrier)
 85		netif_carrier_on(dev);
 86	else
 87		netif_carrier_off(dev);
 88	return 0;
 89}
 90
 91static const struct net_device_ops dummy_netdev_ops = {
 92	.ndo_init		= dummy_dev_init,
 93	.ndo_uninit		= dummy_dev_uninit,
 94	.ndo_start_xmit		= dummy_xmit,
 95	.ndo_validate_addr	= eth_validate_addr,
 96	.ndo_set_rx_mode	= set_multicast_list,
 97	.ndo_set_mac_address	= eth_mac_addr,
 98	.ndo_get_stats64	= dummy_get_stats64,
 99	.ndo_change_carrier	= dummy_change_carrier,
100};
101
 
 
 
 
 
 
 
102static const struct ethtool_ops dummy_ethtool_ops = {
103	.get_ts_info		= ethtool_op_get_ts_info,
104};
105
106static void dummy_setup(struct net_device *dev)
107{
108	ether_setup(dev);
109
110	/* Initialize the device structure. */
111	dev->netdev_ops = &dummy_netdev_ops;
112	dev->ethtool_ops = &dummy_ethtool_ops;
113	dev->needs_free_netdev = true;
114
115	/* Fill in device structure with ethernet-generic values. */
116	dev->flags |= IFF_NOARP;
117	dev->flags &= ~IFF_MULTICAST;
118	dev->priv_flags |= IFF_LIVE_ADDR_CHANGE | IFF_NO_QUEUE;
119	dev->features	|= NETIF_F_SG | NETIF_F_FRAGLIST;
120	dev->features	|= NETIF_F_GSO_SOFTWARE;
121	dev->features	|= NETIF_F_HW_CSUM | NETIF_F_HIGHDMA | NETIF_F_LLTX;
122	dev->features	|= NETIF_F_GSO_ENCAP_ALL;
123	dev->hw_features |= dev->features;
124	dev->hw_enc_features |= dev->features;
125	eth_hw_addr_random(dev);
126
127	dev->min_mtu = 0;
128	dev->max_mtu = 0;
129}
130
131static int dummy_validate(struct nlattr *tb[], struct nlattr *data[],
132			  struct netlink_ext_ack *extack)
133{
134	if (tb[IFLA_ADDRESS]) {
135		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
136			return -EINVAL;
137		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
138			return -EADDRNOTAVAIL;
139	}
140	return 0;
141}
142
143static struct rtnl_link_ops dummy_link_ops __read_mostly = {
144	.kind		= DRV_NAME,
145	.setup		= dummy_setup,
146	.validate	= dummy_validate,
147};
148
149/* Number of dummy devices to be set up by this module. */
150module_param(numdummies, int, 0);
151MODULE_PARM_DESC(numdummies, "Number of dummy pseudo devices");
152
153static int __init dummy_init_one(void)
154{
155	struct net_device *dev_dummy;
156	int err;
157
158	dev_dummy = alloc_netdev(0, "dummy%d", NET_NAME_ENUM, dummy_setup);
159	if (!dev_dummy)
160		return -ENOMEM;
161
162	dev_dummy->rtnl_link_ops = &dummy_link_ops;
163	err = register_netdevice(dev_dummy);
164	if (err < 0)
165		goto err;
166	return 0;
167
168err:
169	free_netdev(dev_dummy);
170	return err;
171}
172
173static int __init dummy_init_module(void)
174{
175	int i, err = 0;
176
177	down_write(&pernet_ops_rwsem);
178	rtnl_lock();
179	err = __rtnl_link_register(&dummy_link_ops);
180	if (err < 0)
181		goto out;
182
183	for (i = 0; i < numdummies && !err; i++) {
184		err = dummy_init_one();
185		cond_resched();
186	}
187	if (err < 0)
188		__rtnl_link_unregister(&dummy_link_ops);
189
190out:
191	rtnl_unlock();
192	up_write(&pernet_ops_rwsem);
193
194	return err;
195}
196
197static void __exit dummy_cleanup_module(void)
198{
199	rtnl_link_unregister(&dummy_link_ops);
200}
201
202module_init(dummy_init_module);
203module_exit(dummy_cleanup_module);
204MODULE_LICENSE("GPL");
205MODULE_DESCRIPTION("Dummy netdevice driver which discards all packets sent to it");
206MODULE_ALIAS_RTNL_LINK(DRV_NAME);
v4.6
 
  1/* dummy.c: a dummy net driver
  2
  3	The purpose of this driver is to provide a device to point a
  4	route through, but not to actually transmit packets.
  5
  6	Why?  If you have a machine whose only connection is an occasional
  7	PPP/SLIP/PLIP link, you can only connect to your own hostname
  8	when the link is up.  Otherwise you have to use localhost.
  9	This isn't very consistent.
 10
 11	One solution is to set up a dummy link using PPP/SLIP/PLIP,
 12	but this seems (to me) too much overhead for too little gain.
 13	This driver provides a small alternative. Thus you can do
 14
 15	[when not running slip]
 16		ifconfig dummy slip.addr.ess.here up
 17	[to go to slip]
 18		ifconfig dummy down
 19		dip whatever
 20
 21	This was written by looking at Donald Becker's skeleton driver
 22	and the loopback driver.  I then threw away anything that didn't
 23	apply!	Thanks to Alan Cox for the key clue on what to do with
 24	misguided packets.
 25
 26			Nick Holloway, 27th May 1994
 27	[I tweaked this explanation a little but that's all]
 28			Alan Cox, 30th May 1994
 29*/
 30
 31#include <linux/module.h>
 32#include <linux/kernel.h>
 33#include <linux/netdevice.h>
 34#include <linux/etherdevice.h>
 
 35#include <linux/init.h>
 36#include <linux/moduleparam.h>
 37#include <linux/rtnetlink.h>
 
 38#include <net/rtnetlink.h>
 39#include <linux/u64_stats_sync.h>
 40
 41#define DRV_NAME	"dummy"
 42#define DRV_VERSION	"1.0"
 43
 44static int numdummies = 1;
 45
 46/* fake multicast ability */
 47static void set_multicast_list(struct net_device *dev)
 48{
 49}
 50
 51struct pcpu_dstats {
 52	u64			tx_packets;
 53	u64			tx_bytes;
 54	struct u64_stats_sync	syncp;
 55};
 56
 57static struct rtnl_link_stats64 *dummy_get_stats64(struct net_device *dev,
 58						   struct rtnl_link_stats64 *stats)
 59{
 60	int i;
 61
 62	for_each_possible_cpu(i) {
 63		const struct pcpu_dstats *dstats;
 64		u64 tbytes, tpackets;
 65		unsigned int start;
 66
 67		dstats = per_cpu_ptr(dev->dstats, i);
 68		do {
 69			start = u64_stats_fetch_begin_irq(&dstats->syncp);
 70			tbytes = dstats->tx_bytes;
 71			tpackets = dstats->tx_packets;
 72		} while (u64_stats_fetch_retry_irq(&dstats->syncp, start));
 73		stats->tx_bytes += tbytes;
 74		stats->tx_packets += tpackets;
 75	}
 76	return stats;
 77}
 78
 79static netdev_tx_t dummy_xmit(struct sk_buff *skb, struct net_device *dev)
 80{
 81	struct pcpu_dstats *dstats = this_cpu_ptr(dev->dstats);
 82
 83	u64_stats_update_begin(&dstats->syncp);
 84	dstats->tx_packets++;
 85	dstats->tx_bytes += skb->len;
 86	u64_stats_update_end(&dstats->syncp);
 87
 
 88	dev_kfree_skb(skb);
 89	return NETDEV_TX_OK;
 90}
 91
 92static int dummy_dev_init(struct net_device *dev)
 93{
 94	dev->dstats = netdev_alloc_pcpu_stats(struct pcpu_dstats);
 95	if (!dev->dstats)
 96		return -ENOMEM;
 97
 98	return 0;
 99}
100
101static void dummy_dev_uninit(struct net_device *dev)
102{
103	free_percpu(dev->dstats);
104}
105
106static int dummy_change_carrier(struct net_device *dev, bool new_carrier)
107{
108	if (new_carrier)
109		netif_carrier_on(dev);
110	else
111		netif_carrier_off(dev);
112	return 0;
113}
114
115static const struct net_device_ops dummy_netdev_ops = {
116	.ndo_init		= dummy_dev_init,
117	.ndo_uninit		= dummy_dev_uninit,
118	.ndo_start_xmit		= dummy_xmit,
119	.ndo_validate_addr	= eth_validate_addr,
120	.ndo_set_rx_mode	= set_multicast_list,
121	.ndo_set_mac_address	= eth_mac_addr,
122	.ndo_get_stats64	= dummy_get_stats64,
123	.ndo_change_carrier	= dummy_change_carrier,
124};
125
126static void dummy_get_drvinfo(struct net_device *dev,
127			      struct ethtool_drvinfo *info)
128{
129	strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
130	strlcpy(info->version, DRV_VERSION, sizeof(info->version));
131}
132
133static const struct ethtool_ops dummy_ethtool_ops = {
134	.get_drvinfo            = dummy_get_drvinfo,
135};
136
137static void dummy_setup(struct net_device *dev)
138{
139	ether_setup(dev);
140
141	/* Initialize the device structure. */
142	dev->netdev_ops = &dummy_netdev_ops;
143	dev->ethtool_ops = &dummy_ethtool_ops;
144	dev->destructor = free_netdev;
145
146	/* Fill in device structure with ethernet-generic values. */
147	dev->flags |= IFF_NOARP;
148	dev->flags &= ~IFF_MULTICAST;
149	dev->priv_flags |= IFF_LIVE_ADDR_CHANGE | IFF_NO_QUEUE;
150	dev->features	|= NETIF_F_SG | NETIF_F_FRAGLIST;
151	dev->features	|= NETIF_F_ALL_TSO | NETIF_F_UFO;
152	dev->features	|= NETIF_F_HW_CSUM | NETIF_F_HIGHDMA | NETIF_F_LLTX;
153	dev->features	|= NETIF_F_GSO_ENCAP_ALL;
154	dev->hw_features |= dev->features;
155	dev->hw_enc_features |= dev->features;
156	eth_hw_addr_random(dev);
 
 
 
157}
158
159static int dummy_validate(struct nlattr *tb[], struct nlattr *data[])
 
160{
161	if (tb[IFLA_ADDRESS]) {
162		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
163			return -EINVAL;
164		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
165			return -EADDRNOTAVAIL;
166	}
167	return 0;
168}
169
170static struct rtnl_link_ops dummy_link_ops __read_mostly = {
171	.kind		= DRV_NAME,
172	.setup		= dummy_setup,
173	.validate	= dummy_validate,
174};
175
176/* Number of dummy devices to be set up by this module. */
177module_param(numdummies, int, 0);
178MODULE_PARM_DESC(numdummies, "Number of dummy pseudo devices");
179
180static int __init dummy_init_one(void)
181{
182	struct net_device *dev_dummy;
183	int err;
184
185	dev_dummy = alloc_netdev(0, "dummy%d", NET_NAME_UNKNOWN, dummy_setup);
186	if (!dev_dummy)
187		return -ENOMEM;
188
189	dev_dummy->rtnl_link_ops = &dummy_link_ops;
190	err = register_netdevice(dev_dummy);
191	if (err < 0)
192		goto err;
193	return 0;
194
195err:
196	free_netdev(dev_dummy);
197	return err;
198}
199
200static int __init dummy_init_module(void)
201{
202	int i, err = 0;
203
 
204	rtnl_lock();
205	err = __rtnl_link_register(&dummy_link_ops);
206	if (err < 0)
207		goto out;
208
209	for (i = 0; i < numdummies && !err; i++) {
210		err = dummy_init_one();
211		cond_resched();
212	}
213	if (err < 0)
214		__rtnl_link_unregister(&dummy_link_ops);
215
216out:
217	rtnl_unlock();
 
218
219	return err;
220}
221
222static void __exit dummy_cleanup_module(void)
223{
224	rtnl_link_unregister(&dummy_link_ops);
225}
226
227module_init(dummy_init_module);
228module_exit(dummy_cleanup_module);
229MODULE_LICENSE("GPL");
 
230MODULE_ALIAS_RTNL_LINK(DRV_NAME);
231MODULE_VERSION(DRV_VERSION);