Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2menu "CAN USB interfaces"
3 depends on USB
4
5config CAN_8DEV_USB
6 tristate "8 devices USB2CAN interface"
7 help
8 This driver supports the USB2CAN interface
9 from 8 devices (http://www.8devices.com).
10
11config CAN_EMS_USB
12 tristate "EMS CPC-USB/ARM7 CAN/USB interface"
13 help
14 This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
15 from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
16
17config CAN_ESD_USB
18 tristate "esd electronics gmbh CAN/USB interfaces"
19 help
20 This driver adds supports for several CAN/USB interfaces
21 from esd electronics gmbh (https://www.esd.eu).
22
23 The drivers supports the following devices:
24 - esd CAN-USB/2
25 - esd CAN-USB/Micro
26
27 To compile this driver as a module, choose M here: the module
28 will be called esd_usb.
29
30config CAN_ETAS_ES58X
31 tristate "ETAS ES58X CAN/USB interfaces"
32 select CRC16
33 select NET_DEVLINK
34 help
35 This driver supports the ES581.4, ES582.1 and ES584.1 interfaces
36 from ETAS GmbH (https://www.etas.com/en/products/es58x.php).
37
38 To compile this driver as a module, choose M here: the module
39 will be called etas_es58x.
40
41config CAN_F81604
42 tristate "Fintek F81604 USB to 2CAN interface"
43 help
44 This driver supports the Fintek F81604 USB to 2CAN interface.
45 The device can support CAN2.0A/B protocol and also support
46 2 output pins to control external terminator (optional).
47
48 To compile this driver as a module, choose M here: the module will
49 be called f81604.
50
51 (see also https://www.fintek.com.tw).
52
53config CAN_GS_USB
54 tristate "Geschwister Schneider UG and candleLight compatible interfaces"
55 select CAN_RX_OFFLOAD
56 help
57 This driver supports the Geschwister Schneider and
58 bytewerk.org candleLight compatible
59 (https://github.com/candle-usb/candleLight_fw) USB/CAN
60 interfaces.
61
62 If unsure choose N,
63 choose Y for built in support,
64 M to compile as module (module will be named: gs_usb).
65
66config CAN_KVASER_USB
67 tristate "Kvaser CAN/USB interface"
68 help
69 This driver adds support for Kvaser CAN/USB devices like Kvaser
70 Leaf Light, Kvaser USBcan II and Kvaser Memorator Pro 5xHS.
71
72 The driver provides support for the following devices:
73 - Kvaser Leaf Light
74 - Kvaser Leaf Professional HS
75 - Kvaser Leaf SemiPro HS
76 - Kvaser Leaf Professional LS
77 - Kvaser Leaf Professional SWC
78 - Kvaser Leaf Professional LIN
79 - Kvaser Leaf SemiPro LS
80 - Kvaser Leaf SemiPro SWC
81 - Kvaser Memorator II HS/HS
82 - Kvaser USBcan Professional HS/HS
83 - Kvaser Leaf Light GI
84 - Kvaser Leaf Professional HS (OBD-II connector)
85 - Kvaser Memorator Professional HS/LS
86 - Kvaser Leaf Light "China"
87 - Kvaser BlackBird SemiPro
88 - Kvaser USBcan R
89 - Kvaser USBcan R v2
90 - Kvaser Leaf Light v2
91 - Kvaser Leaf Light R v2
92 - Kvaser Mini PCI Express HS
93 - Kvaser Mini PCI Express 2xHS
94 - Kvaser USBcan Light 2xHS
95 - Kvaser USBcan II HS/HS
96 - Kvaser USBcan II HS/LS
97 - Kvaser USBcan Rugged ("USBcan Rev B")
98 - Kvaser Memorator HS/HS
99 - Kvaser Memorator HS/LS
100 - Scania VCI2 (if you have the Kvaser logo on top)
101 - Kvaser BlackBird v2
102 - Kvaser Leaf Pro HS v2
103 - Kvaser Hybrid CAN/LIN
104 - Kvaser Hybrid 2xCAN/LIN
105 - Kvaser Hybrid Pro CAN/LIN
106 - Kvaser Hybrid Pro 2xCAN/LIN
107 - Kvaser Memorator 2xHS v2
108 - Kvaser Memorator Pro 2xHS v2
109 - Kvaser Memorator Pro 5xHS
110 - Kvaser USBcan Light 4xHS
111 - Kvaser USBcan Pro 2xHS v2
112 - Kvaser USBcan Pro 4xHS
113 - Kvaser USBcan Pro 5xHS
114 - Kvaser U100
115 - Kvaser U100P
116 - Kvaser U100S
117 - ATI Memorator Pro 2xHS v2
118 - ATI USBcan Pro 2xHS v2
119
120 If unsure, say N.
121
122 To compile this driver as a module, choose M here: the
123 module will be called kvaser_usb.
124
125config CAN_MCBA_USB
126 tristate "Microchip CAN BUS Analyzer interface"
127 help
128 This driver supports the CAN BUS Analyzer interface
129 from Microchip (http://www.microchip.com/development-tools/).
130
131config CAN_PEAK_USB
132 tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD"
133 help
134 This driver supports the PEAK-System Technik USB adapters that enable
135 access to the CAN bus, with respect to the CAN 2.0b and/or CAN-FD
136 standards, that is:
137
138 PCAN-USB single CAN 2.0b channel USB adapter
139 PCAN-USB Pro dual CAN 2.0b channels USB adapter
140 PCAN-USB FD single CAN-FD channel USB adapter
141 PCAN-USB Pro FD dual CAN-FD channels USB adapter
142 PCAN-Chip USB CAN-FD to USB stamp module
143 PCAN-USB X6 6 CAN-FD channels USB adapter
144
145 (see also http://www.peak-system.com).
146
147config CAN_UCAN
148 tristate "Theobroma Systems UCAN interface"
149 help
150 This driver supports the Theobroma Systems
151 UCAN USB-CAN interface.
152
153 The UCAN driver supports the microcontroller-based USB/CAN
154 adapters from Theobroma Systems. There are two form-factors
155 that run essentially the same firmware:
156
157 * Seal: standalone USB stick
158 https://www.theobroma-systems.com/seal)
159 * Mule: integrated on the PCB of various System-on-Modules
160 from Theobroma Systems like the A31-µQ7 and the RK3399-Q7
161 (https://www.theobroma-systems.com/rk3399-q7)
162
163endmenu
1menu "CAN USB interfaces"
2 depends on USB
3
4config CAN_EMS_USB
5 tristate "EMS CPC-USB/ARM7 CAN/USB interface"
6 ---help---
7 This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
8 from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
9
10config CAN_ESD_USB2
11 tristate "ESD USB/2 CAN/USB interface"
12 ---help---
13 This driver supports the CAN-USB/2 interface
14 from esd electronic system design gmbh (http://www.esd.eu).
15
16config CAN_GS_USB
17 tristate "Geschwister Schneider UG interfaces"
18 ---help---
19 This driver supports the Geschwister Schneider USB/CAN devices.
20 If unsure choose N,
21 choose Y for built in support,
22 M to compile as module (module will be named: gs_usb).
23
24config CAN_KVASER_USB
25 tristate "Kvaser CAN/USB interface"
26 ---help---
27 This driver adds support for Kvaser CAN/USB devices like Kvaser
28 Leaf Light and Kvaser USBcan II.
29
30 The driver provides support for the following devices:
31 - Kvaser Leaf Light
32 - Kvaser Leaf Professional HS
33 - Kvaser Leaf SemiPro HS
34 - Kvaser Leaf Professional LS
35 - Kvaser Leaf Professional SWC
36 - Kvaser Leaf Professional LIN
37 - Kvaser Leaf SemiPro LS
38 - Kvaser Leaf SemiPro SWC
39 - Kvaser Memorator II HS/HS
40 - Kvaser USBcan Professional HS/HS
41 - Kvaser Leaf Light GI
42 - Kvaser Leaf Professional HS (OBD-II connector)
43 - Kvaser Memorator Professional HS/LS
44 - Kvaser Leaf Light "China"
45 - Kvaser BlackBird SemiPro
46 - Kvaser USBcan R
47 - Kvaser Leaf Light v2
48 - Kvaser Mini PCI Express HS
49 - Kvaser USBcan II HS/HS
50 - Kvaser USBcan II HS/LS
51 - Kvaser USBcan Rugged ("USBcan Rev B")
52 - Kvaser Memorator HS/HS
53 - Kvaser Memorator HS/LS
54 - Scania VCI2 (if you have the Kvaser logo on top)
55
56 If unsure, say N.
57
58 To compile this driver as a module, choose M here: the
59 module will be called kvaser_usb.
60
61config CAN_PEAK_USB
62 tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD"
63 ---help---
64 This driver supports the PEAK-System Technik USB adapters that enable
65 access to the CAN bus, with repect to the CAN 2.0b and/or CAN-FD
66 standards, that is:
67
68 PCAN-USB single CAN 2.0b channel USB adapter
69 PCAN-USB Pro dual CAN 2.0b channels USB adapter
70 PCAN-USB FD single CAN-FD channel USB adapter
71 PCAN-USB Pro FD dual CAN-FD channels USB adapter
72
73 (see also http://www.peak-system.com).
74
75config CAN_8DEV_USB
76 tristate "8 devices USB2CAN interface"
77 ---help---
78 This driver supports the USB2CAN interface
79 from 8 devices (http://www.8devices.com).
80
81endmenu