Loading...
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * Copyright (C) 2011 Red Hat, Inc.
4 *
5 * This file is released under the GPL.
6 */
7
8#ifndef _LINUX_DM_BLOCK_MANAGER_H
9#define _LINUX_DM_BLOCK_MANAGER_H
10
11#include <linux/types.h>
12#include <linux/blkdev.h>
13
14/*----------------------------------------------------------------*/
15
16/*
17 * Block number.
18 */
19typedef uint64_t dm_block_t;
20struct dm_block;
21
22dm_block_t dm_block_location(struct dm_block *b);
23void *dm_block_data(struct dm_block *b);
24
25/*----------------------------------------------------------------*/
26
27/*
28 * @name should be a unique identifier for the block manager, no longer
29 * than 32 chars.
30 *
31 * @max_held_per_thread should be the maximum number of locks, read or
32 * write, that an individual thread holds at any one time.
33 */
34struct dm_block_manager;
35struct dm_block_manager *dm_block_manager_create(
36 struct block_device *bdev, unsigned int block_size,
37 unsigned int max_held_per_thread);
38void dm_block_manager_destroy(struct dm_block_manager *bm);
39void dm_block_manager_reset(struct dm_block_manager *bm);
40
41unsigned int dm_bm_block_size(struct dm_block_manager *bm);
42dm_block_t dm_bm_nr_blocks(struct dm_block_manager *bm);
43
44/*----------------------------------------------------------------*/
45
46/*
47 * The validator allows the caller to verify newly-read data and modify
48 * the data just before writing, e.g. to calculate checksums. It's
49 * important to be consistent with your use of validators. The only time
50 * you can change validators is if you call dm_bm_write_lock_zero.
51 */
52struct dm_block_validator {
53 const char *name;
54 void (*prepare_for_write)(struct dm_block_validator *v, struct dm_block *b, size_t block_size);
55
56 /*
57 * Return 0 if the checksum is valid or < 0 on error.
58 */
59 int (*check)(struct dm_block_validator *v, struct dm_block *b, size_t block_size);
60};
61
62/*----------------------------------------------------------------*/
63
64/*
65 * You can have multiple concurrent readers or a single writer holding a
66 * block lock.
67 */
68
69/*
70 * dm_bm_lock() locks a block and returns through @result a pointer to
71 * memory that holds a copy of that block. If you have write-locked the
72 * block then any changes you make to memory pointed to by @result will be
73 * written back to the disk sometime after dm_bm_unlock is called.
74 */
75int dm_bm_read_lock(struct dm_block_manager *bm, dm_block_t b,
76 struct dm_block_validator *v,
77 struct dm_block **result);
78
79int dm_bm_write_lock(struct dm_block_manager *bm, dm_block_t b,
80 struct dm_block_validator *v,
81 struct dm_block **result);
82
83/*
84 * The *_try_lock variants return -EWOULDBLOCK if the block isn't
85 * available immediately.
86 */
87int dm_bm_read_try_lock(struct dm_block_manager *bm, dm_block_t b,
88 struct dm_block_validator *v,
89 struct dm_block **result);
90
91/*
92 * Use dm_bm_write_lock_zero() when you know you're going to
93 * overwrite the block completely. It saves a disk read.
94 */
95int dm_bm_write_lock_zero(struct dm_block_manager *bm, dm_block_t b,
96 struct dm_block_validator *v,
97 struct dm_block **result);
98
99void dm_bm_unlock(struct dm_block *b);
100
101/*
102 * It's a common idiom to have a superblock that should be committed last.
103 *
104 * @superblock should be write-locked on entry. It will be unlocked during
105 * this function. All dirty blocks are guaranteed to be written and flushed
106 * before the superblock.
107 *
108 * This method always blocks.
109 */
110int dm_bm_flush(struct dm_block_manager *bm);
111
112/*
113 * Request data is prefetched into the cache.
114 */
115void dm_bm_prefetch(struct dm_block_manager *bm, dm_block_t b);
116
117/*
118 * Switches the bm to a read only mode. Once read-only mode
119 * has been entered the following functions will return -EPERM.
120 *
121 * dm_bm_write_lock
122 * dm_bm_write_lock_zero
123 * dm_bm_flush_and_unlock
124 *
125 * Additionally you should not use dm_bm_unlock_move, however no error will
126 * be returned if you do.
127 */
128bool dm_bm_is_read_only(struct dm_block_manager *bm);
129void dm_bm_set_read_only(struct dm_block_manager *bm);
130void dm_bm_set_read_write(struct dm_block_manager *bm);
131
132u32 dm_bm_checksum(const void *data, size_t len, u32 init_xor);
133
134/*----------------------------------------------------------------*/
135
136#endif /* _LINUX_DM_BLOCK_MANAGER_H */
1/*
2 * Copyright (C) 2011 Red Hat, Inc.
3 *
4 * This file is released under the GPL.
5 */
6
7#ifndef _LINUX_DM_BLOCK_MANAGER_H
8#define _LINUX_DM_BLOCK_MANAGER_H
9
10#include <linux/types.h>
11#include <linux/blkdev.h>
12
13/*----------------------------------------------------------------*/
14
15/*
16 * Block number.
17 */
18typedef uint64_t dm_block_t;
19struct dm_block;
20
21dm_block_t dm_block_location(struct dm_block *b);
22void *dm_block_data(struct dm_block *b);
23
24/*----------------------------------------------------------------*/
25
26/*
27 * @name should be a unique identifier for the block manager, no longer
28 * than 32 chars.
29 *
30 * @max_held_per_thread should be the maximum number of locks, read or
31 * write, that an individual thread holds at any one time.
32 */
33struct dm_block_manager;
34struct dm_block_manager *dm_block_manager_create(
35 struct block_device *bdev, unsigned block_size,
36 unsigned cache_size, unsigned max_held_per_thread);
37void dm_block_manager_destroy(struct dm_block_manager *bm);
38
39unsigned dm_bm_block_size(struct dm_block_manager *bm);
40dm_block_t dm_bm_nr_blocks(struct dm_block_manager *bm);
41
42/*----------------------------------------------------------------*/
43
44/*
45 * The validator allows the caller to verify newly-read data and modify
46 * the data just before writing, e.g. to calculate checksums. It's
47 * important to be consistent with your use of validators. The only time
48 * you can change validators is if you call dm_bm_write_lock_zero.
49 */
50struct dm_block_validator {
51 const char *name;
52 void (*prepare_for_write)(struct dm_block_validator *v, struct dm_block *b, size_t block_size);
53
54 /*
55 * Return 0 if the checksum is valid or < 0 on error.
56 */
57 int (*check)(struct dm_block_validator *v, struct dm_block *b, size_t block_size);
58};
59
60/*----------------------------------------------------------------*/
61
62/*
63 * You can have multiple concurrent readers or a single writer holding a
64 * block lock.
65 */
66
67/*
68 * dm_bm_lock() locks a block and returns through @result a pointer to
69 * memory that holds a copy of that block. If you have write-locked the
70 * block then any changes you make to memory pointed to by @result will be
71 * written back to the disk sometime after dm_bm_unlock is called.
72 */
73int dm_bm_read_lock(struct dm_block_manager *bm, dm_block_t b,
74 struct dm_block_validator *v,
75 struct dm_block **result);
76
77int dm_bm_write_lock(struct dm_block_manager *bm, dm_block_t b,
78 struct dm_block_validator *v,
79 struct dm_block **result);
80
81/*
82 * The *_try_lock variants return -EWOULDBLOCK if the block isn't
83 * available immediately.
84 */
85int dm_bm_read_try_lock(struct dm_block_manager *bm, dm_block_t b,
86 struct dm_block_validator *v,
87 struct dm_block **result);
88
89/*
90 * Use dm_bm_write_lock_zero() when you know you're going to
91 * overwrite the block completely. It saves a disk read.
92 */
93int dm_bm_write_lock_zero(struct dm_block_manager *bm, dm_block_t b,
94 struct dm_block_validator *v,
95 struct dm_block **result);
96
97void dm_bm_unlock(struct dm_block *b);
98
99/*
100 * It's a common idiom to have a superblock that should be committed last.
101 *
102 * @superblock should be write-locked on entry. It will be unlocked during
103 * this function. All dirty blocks are guaranteed to be written and flushed
104 * before the superblock.
105 *
106 * This method always blocks.
107 */
108int dm_bm_flush(struct dm_block_manager *bm);
109
110/*
111 * Request data is prefetched into the cache.
112 */
113void dm_bm_prefetch(struct dm_block_manager *bm, dm_block_t b);
114
115/*
116 * Switches the bm to a read only mode. Once read-only mode
117 * has been entered the following functions will return -EPERM.
118 *
119 * dm_bm_write_lock
120 * dm_bm_write_lock_zero
121 * dm_bm_flush_and_unlock
122 *
123 * Additionally you should not use dm_bm_unlock_move, however no error will
124 * be returned if you do.
125 */
126bool dm_bm_is_read_only(struct dm_block_manager *bm);
127void dm_bm_set_read_only(struct dm_block_manager *bm);
128void dm_bm_set_read_write(struct dm_block_manager *bm);
129
130u32 dm_bm_checksum(const void *data, size_t len, u32 init_xor);
131
132/*----------------------------------------------------------------*/
133
134#endif /* _LINUX_DM_BLOCK_MANAGER_H */