Loading...
1/*
2 * TI Touch Screen driver
3 *
4 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation version 2.
9 *
10 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
11 * kind, whether express or implied; without even the implied warranty
12 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 */
15
16
17#include <linux/kernel.h>
18#include <linux/err.h>
19#include <linux/module.h>
20#include <linux/input.h>
21#include <linux/slab.h>
22#include <linux/interrupt.h>
23#include <linux/clk.h>
24#include <linux/platform_device.h>
25#include <linux/io.h>
26#include <linux/delay.h>
27#include <linux/of.h>
28#include <linux/sort.h>
29#include <linux/pm_wakeirq.h>
30
31#include <linux/mfd/ti_am335x_tscadc.h>
32
33#define ADCFSM_STEPID 0x10
34#define SEQ_SETTLE 275
35#define MAX_12BIT ((1 << 12) - 1)
36
37#define TSC_IRQENB_MASK (IRQENB_FIFO0THRES | IRQENB_EOS | IRQENB_HW_PEN)
38
39static const int config_pins[] = {
40 STEPCONFIG_XPP,
41 STEPCONFIG_XNN,
42 STEPCONFIG_YPP,
43 STEPCONFIG_YNN,
44};
45
46struct titsc {
47 struct input_dev *input;
48 struct ti_tscadc_dev *mfd_tscadc;
49 struct device *dev;
50 unsigned int irq;
51 unsigned int wires;
52 unsigned int x_plate_resistance;
53 bool pen_down;
54 int coordinate_readouts;
55 u32 config_inp[4];
56 u32 bit_xp, bit_xn, bit_yp, bit_yn;
57 u32 inp_xp, inp_xn, inp_yp, inp_yn;
58 u32 step_mask;
59 u32 charge_delay;
60};
61
62static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
63{
64 return readl(ts->mfd_tscadc->tscadc_base + reg);
65}
66
67static void titsc_writel(struct titsc *tsc, unsigned int reg,
68 unsigned int val)
69{
70 writel(val, tsc->mfd_tscadc->tscadc_base + reg);
71}
72
73static int titsc_config_wires(struct titsc *ts_dev)
74{
75 u32 analog_line[4];
76 u32 wire_order[4];
77 int i, bit_cfg;
78
79 for (i = 0; i < 4; i++) {
80 /*
81 * Get the order in which TSC wires are attached
82 * w.r.t. each of the analog input lines on the EVM.
83 */
84 analog_line[i] = (ts_dev->config_inp[i] & 0xF0) >> 4;
85 wire_order[i] = ts_dev->config_inp[i] & 0x0F;
86 if (WARN_ON(analog_line[i] > 7))
87 return -EINVAL;
88 if (WARN_ON(wire_order[i] > ARRAY_SIZE(config_pins)))
89 return -EINVAL;
90 }
91
92 for (i = 0; i < 4; i++) {
93 int an_line;
94 int wi_order;
95
96 an_line = analog_line[i];
97 wi_order = wire_order[i];
98 bit_cfg = config_pins[wi_order];
99 if (bit_cfg == 0)
100 return -EINVAL;
101 switch (wi_order) {
102 case 0:
103 ts_dev->bit_xp = bit_cfg;
104 ts_dev->inp_xp = an_line;
105 break;
106
107 case 1:
108 ts_dev->bit_xn = bit_cfg;
109 ts_dev->inp_xn = an_line;
110 break;
111
112 case 2:
113 ts_dev->bit_yp = bit_cfg;
114 ts_dev->inp_yp = an_line;
115 break;
116 case 3:
117 ts_dev->bit_yn = bit_cfg;
118 ts_dev->inp_yn = an_line;
119 break;
120 }
121 }
122 return 0;
123}
124
125static void titsc_step_config(struct titsc *ts_dev)
126{
127 unsigned int config;
128 int i, n;
129 int end_step, first_step, tsc_steps;
130 u32 stepenable;
131
132 config = STEPCONFIG_MODE_HWSYNC |
133 STEPCONFIG_AVG_16 | ts_dev->bit_xp |
134 STEPCONFIG_INM_ADCREFM;
135 switch (ts_dev->wires) {
136 case 4:
137 config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
138 break;
139 case 5:
140 config |= ts_dev->bit_yn |
141 STEPCONFIG_INP_AN4 | ts_dev->bit_xn |
142 ts_dev->bit_yp;
143 break;
144 case 8:
145 config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
146 break;
147 }
148
149 tsc_steps = ts_dev->coordinate_readouts * 2 + 2;
150 first_step = TOTAL_STEPS - tsc_steps;
151 /* Steps 16 to 16-coordinate_readouts is for X */
152 end_step = first_step + tsc_steps;
153 n = 0;
154 for (i = end_step - ts_dev->coordinate_readouts; i < end_step; i++) {
155 titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
156 titsc_writel(ts_dev, REG_STEPDELAY(i),
157 n++ == 0 ? STEPCONFIG_OPENDLY : 0);
158 }
159
160 config = 0;
161 config = STEPCONFIG_MODE_HWSYNC |
162 STEPCONFIG_AVG_16 | ts_dev->bit_yn |
163 STEPCONFIG_INM_ADCREFM;
164 switch (ts_dev->wires) {
165 case 4:
166 config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
167 break;
168 case 5:
169 config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 |
170 STEPCONFIG_XNP | STEPCONFIG_YPN;
171 break;
172 case 8:
173 config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
174 break;
175 }
176
177 /* 1 ... coordinate_readouts is for Y */
178 end_step = first_step + ts_dev->coordinate_readouts;
179 n = 0;
180 for (i = first_step; i < end_step; i++) {
181 titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
182 titsc_writel(ts_dev, REG_STEPDELAY(i),
183 n++ == 0 ? STEPCONFIG_OPENDLY : 0);
184 }
185
186 /* Make CHARGECONFIG same as IDLECONFIG */
187
188 config = titsc_readl(ts_dev, REG_IDLECONFIG);
189 titsc_writel(ts_dev, REG_CHARGECONFIG, config);
190 titsc_writel(ts_dev, REG_CHARGEDELAY, ts_dev->charge_delay);
191
192 /* coordinate_readouts + 1 ... coordinate_readouts + 2 is for Z */
193 config = STEPCONFIG_MODE_HWSYNC |
194 STEPCONFIG_AVG_16 | ts_dev->bit_yp |
195 ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM |
196 STEPCONFIG_INP(ts_dev->inp_xp);
197 titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
198 titsc_writel(ts_dev, REG_STEPDELAY(end_step),
199 STEPCONFIG_OPENDLY);
200
201 end_step++;
202 config = STEPCONFIG_MODE_HWSYNC |
203 STEPCONFIG_AVG_16 | ts_dev->bit_yp |
204 ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM |
205 STEPCONFIG_INP(ts_dev->inp_yn);
206 titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
207 titsc_writel(ts_dev, REG_STEPDELAY(end_step),
208 STEPCONFIG_OPENDLY);
209
210 /* The steps end ... end - readouts * 2 + 2 and bit 0 for TS_Charge */
211 stepenable = 1;
212 for (i = 0; i < tsc_steps; i++)
213 stepenable |= 1 << (first_step + i + 1);
214
215 ts_dev->step_mask = stepenable;
216 am335x_tsc_se_set_cache(ts_dev->mfd_tscadc, ts_dev->step_mask);
217}
218
219static int titsc_cmp_coord(const void *a, const void *b)
220{
221 return *(int *)a - *(int *)b;
222}
223
224static void titsc_read_coordinates(struct titsc *ts_dev,
225 u32 *x, u32 *y, u32 *z1, u32 *z2)
226{
227 unsigned int yvals[7], xvals[7];
228 unsigned int i, xsum = 0, ysum = 0;
229 unsigned int creads = ts_dev->coordinate_readouts;
230
231 for (i = 0; i < creads; i++) {
232 yvals[i] = titsc_readl(ts_dev, REG_FIFO0);
233 yvals[i] &= 0xfff;
234 }
235
236 *z1 = titsc_readl(ts_dev, REG_FIFO0);
237 *z1 &= 0xfff;
238 *z2 = titsc_readl(ts_dev, REG_FIFO0);
239 *z2 &= 0xfff;
240
241 for (i = 0; i < creads; i++) {
242 xvals[i] = titsc_readl(ts_dev, REG_FIFO0);
243 xvals[i] &= 0xfff;
244 }
245
246 /*
247 * If co-ordinates readouts is less than 4 then
248 * report the average. In case of 4 or more
249 * readouts, sort the co-ordinate samples, drop
250 * min and max values and report the average of
251 * remaining values.
252 */
253 if (creads <= 3) {
254 for (i = 0; i < creads; i++) {
255 ysum += yvals[i];
256 xsum += xvals[i];
257 }
258 ysum /= creads;
259 xsum /= creads;
260 } else {
261 sort(yvals, creads, sizeof(unsigned int),
262 titsc_cmp_coord, NULL);
263 sort(xvals, creads, sizeof(unsigned int),
264 titsc_cmp_coord, NULL);
265 for (i = 1; i < creads - 1; i++) {
266 ysum += yvals[i];
267 xsum += xvals[i];
268 }
269 ysum /= creads - 2;
270 xsum /= creads - 2;
271 }
272 *y = ysum;
273 *x = xsum;
274}
275
276static irqreturn_t titsc_irq(int irq, void *dev)
277{
278 struct titsc *ts_dev = dev;
279 struct input_dev *input_dev = ts_dev->input;
280 unsigned int fsm, status, irqclr = 0;
281 unsigned int x = 0, y = 0;
282 unsigned int z1, z2, z;
283
284 status = titsc_readl(ts_dev, REG_RAWIRQSTATUS);
285 if (status & IRQENB_HW_PEN) {
286 ts_dev->pen_down = true;
287 irqclr |= IRQENB_HW_PEN;
288 pm_stay_awake(ts_dev->dev);
289 }
290
291 if (status & IRQENB_PENUP) {
292 fsm = titsc_readl(ts_dev, REG_ADCFSM);
293 if (fsm == ADCFSM_STEPID) {
294 ts_dev->pen_down = false;
295 input_report_key(input_dev, BTN_TOUCH, 0);
296 input_report_abs(input_dev, ABS_PRESSURE, 0);
297 input_sync(input_dev);
298 pm_relax(ts_dev->dev);
299 } else {
300 ts_dev->pen_down = true;
301 }
302 irqclr |= IRQENB_PENUP;
303 }
304
305 if (status & IRQENB_EOS)
306 irqclr |= IRQENB_EOS;
307
308 /*
309 * ADC and touchscreen share the IRQ line.
310 * FIFO1 interrupts are used by ADC. Handle FIFO0 IRQs here only
311 */
312 if (status & IRQENB_FIFO0THRES) {
313
314 titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2);
315
316 if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
317 /*
318 * Calculate pressure using formula
319 * Resistance(touch) = x plate resistance *
320 * x position/4096 * ((z2 / z1) - 1)
321 */
322 z = z1 - z2;
323 z *= x;
324 z *= ts_dev->x_plate_resistance;
325 z /= z2;
326 z = (z + 2047) >> 12;
327
328 if (z <= MAX_12BIT) {
329 input_report_abs(input_dev, ABS_X, x);
330 input_report_abs(input_dev, ABS_Y, y);
331 input_report_abs(input_dev, ABS_PRESSURE, z);
332 input_report_key(input_dev, BTN_TOUCH, 1);
333 input_sync(input_dev);
334 }
335 }
336 irqclr |= IRQENB_FIFO0THRES;
337 }
338 if (irqclr) {
339 titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
340 if (status & IRQENB_EOS)
341 am335x_tsc_se_set_cache(ts_dev->mfd_tscadc,
342 ts_dev->step_mask);
343 return IRQ_HANDLED;
344 }
345 return IRQ_NONE;
346}
347
348static int titsc_parse_dt(struct platform_device *pdev,
349 struct titsc *ts_dev)
350{
351 struct device_node *node = pdev->dev.of_node;
352 int err;
353
354 if (!node)
355 return -EINVAL;
356
357 err = of_property_read_u32(node, "ti,wires", &ts_dev->wires);
358 if (err < 0)
359 return err;
360 switch (ts_dev->wires) {
361 case 4:
362 case 5:
363 case 8:
364 break;
365 default:
366 return -EINVAL;
367 }
368
369 err = of_property_read_u32(node, "ti,x-plate-resistance",
370 &ts_dev->x_plate_resistance);
371 if (err < 0)
372 return err;
373
374 /*
375 * Try with the new binding first. If it fails, try again with
376 * bogus, miss-spelled version.
377 */
378 err = of_property_read_u32(node, "ti,coordinate-readouts",
379 &ts_dev->coordinate_readouts);
380 if (err < 0) {
381 dev_warn(&pdev->dev, "please use 'ti,coordinate-readouts' instead\n");
382 err = of_property_read_u32(node, "ti,coordiante-readouts",
383 &ts_dev->coordinate_readouts);
384 }
385
386 if (err < 0)
387 return err;
388
389 if (ts_dev->coordinate_readouts <= 0) {
390 dev_warn(&pdev->dev,
391 "invalid co-ordinate readouts, resetting it to 5\n");
392 ts_dev->coordinate_readouts = 5;
393 }
394
395 err = of_property_read_u32(node, "ti,charge-delay",
396 &ts_dev->charge_delay);
397 /*
398 * If ti,charge-delay value is not specified, then use
399 * CHARGEDLY_OPENDLY as the default value.
400 */
401 if (err < 0) {
402 ts_dev->charge_delay = CHARGEDLY_OPENDLY;
403 dev_warn(&pdev->dev, "ti,charge-delay not specified\n");
404 }
405
406 return of_property_read_u32_array(node, "ti,wire-config",
407 ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp));
408}
409
410/*
411 * The functions for inserting/removing driver as a module.
412 */
413
414static int titsc_probe(struct platform_device *pdev)
415{
416 struct titsc *ts_dev;
417 struct input_dev *input_dev;
418 struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev);
419 int err;
420
421 /* Allocate memory for device */
422 ts_dev = kzalloc(sizeof(*ts_dev), GFP_KERNEL);
423 input_dev = input_allocate_device();
424 if (!ts_dev || !input_dev) {
425 dev_err(&pdev->dev, "failed to allocate memory.\n");
426 err = -ENOMEM;
427 goto err_free_mem;
428 }
429
430 tscadc_dev->tsc = ts_dev;
431 ts_dev->mfd_tscadc = tscadc_dev;
432 ts_dev->input = input_dev;
433 ts_dev->irq = tscadc_dev->irq;
434 ts_dev->dev = &pdev->dev;
435
436 err = titsc_parse_dt(pdev, ts_dev);
437 if (err) {
438 dev_err(&pdev->dev, "Could not find valid DT data.\n");
439 goto err_free_mem;
440 }
441
442 err = request_irq(ts_dev->irq, titsc_irq,
443 IRQF_SHARED, pdev->dev.driver->name, ts_dev);
444 if (err) {
445 dev_err(&pdev->dev, "failed to allocate irq.\n");
446 goto err_free_mem;
447 }
448
449 device_init_wakeup(&pdev->dev, true);
450 err = dev_pm_set_wake_irq(&pdev->dev, ts_dev->irq);
451 if (err)
452 dev_err(&pdev->dev, "irq wake enable failed.\n");
453
454 titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK);
455 titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
456 titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_EOS);
457 err = titsc_config_wires(ts_dev);
458 if (err) {
459 dev_err(&pdev->dev, "wrong i/p wire configuration\n");
460 goto err_free_irq;
461 }
462 titsc_step_config(ts_dev);
463 titsc_writel(ts_dev, REG_FIFO0THR,
464 ts_dev->coordinate_readouts * 2 + 2 - 1);
465
466 input_dev->name = "ti-tsc";
467 input_dev->dev.parent = &pdev->dev;
468
469 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
470 input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
471
472 input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
473 input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
474 input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
475
476 /* register to the input system */
477 err = input_register_device(input_dev);
478 if (err)
479 goto err_free_irq;
480
481 platform_set_drvdata(pdev, ts_dev);
482 return 0;
483
484err_free_irq:
485 dev_pm_clear_wake_irq(&pdev->dev);
486 device_init_wakeup(&pdev->dev, false);
487 free_irq(ts_dev->irq, ts_dev);
488err_free_mem:
489 input_free_device(input_dev);
490 kfree(ts_dev);
491 return err;
492}
493
494static void titsc_remove(struct platform_device *pdev)
495{
496 struct titsc *ts_dev = platform_get_drvdata(pdev);
497 u32 steps;
498
499 dev_pm_clear_wake_irq(&pdev->dev);
500 device_init_wakeup(&pdev->dev, false);
501 free_irq(ts_dev->irq, ts_dev);
502
503 /* total steps followed by the enable mask */
504 steps = 2 * ts_dev->coordinate_readouts + 2;
505 steps = (1 << steps) - 1;
506 am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps);
507
508 input_unregister_device(ts_dev->input);
509
510 kfree(ts_dev);
511}
512
513static int titsc_suspend(struct device *dev)
514{
515 struct titsc *ts_dev = dev_get_drvdata(dev);
516 unsigned int idle;
517
518 if (device_may_wakeup(dev)) {
519 titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK);
520 idle = titsc_readl(ts_dev, REG_IRQENABLE);
521 titsc_writel(ts_dev, REG_IRQENABLE,
522 (idle | IRQENB_HW_PEN));
523 titsc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB);
524 }
525 return 0;
526}
527
528static int titsc_resume(struct device *dev)
529{
530 struct titsc *ts_dev = dev_get_drvdata(dev);
531
532 if (device_may_wakeup(dev)) {
533 titsc_writel(ts_dev, REG_IRQWAKEUP,
534 0x00);
535 titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
536 pm_relax(dev);
537 }
538 titsc_step_config(ts_dev);
539 titsc_writel(ts_dev, REG_FIFO0THR,
540 ts_dev->coordinate_readouts * 2 + 2 - 1);
541 return 0;
542}
543
544static DEFINE_SIMPLE_DEV_PM_OPS(titsc_pm_ops, titsc_suspend, titsc_resume);
545
546static const struct of_device_id ti_tsc_dt_ids[] = {
547 { .compatible = "ti,am3359-tsc", },
548 { }
549};
550MODULE_DEVICE_TABLE(of, ti_tsc_dt_ids);
551
552static struct platform_driver ti_tsc_driver = {
553 .probe = titsc_probe,
554 .remove_new = titsc_remove,
555 .driver = {
556 .name = "TI-am335x-tsc",
557 .pm = pm_sleep_ptr(&titsc_pm_ops),
558 .of_match_table = ti_tsc_dt_ids,
559 },
560};
561module_platform_driver(ti_tsc_driver);
562
563MODULE_DESCRIPTION("TI touchscreen controller driver");
564MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
565MODULE_LICENSE("GPL");
1/*
2 * TI Touch Screen driver
3 *
4 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
5 *
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation version 2.
9 *
10 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
11 * kind, whether express or implied; without even the implied warranty
12 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 */
15
16
17#include <linux/kernel.h>
18#include <linux/err.h>
19#include <linux/module.h>
20#include <linux/input.h>
21#include <linux/slab.h>
22#include <linux/interrupt.h>
23#include <linux/clk.h>
24#include <linux/platform_device.h>
25#include <linux/io.h>
26#include <linux/delay.h>
27#include <linux/of.h>
28#include <linux/of_device.h>
29#include <linux/sort.h>
30
31#include <linux/mfd/ti_am335x_tscadc.h>
32
33#define ADCFSM_STEPID 0x10
34#define SEQ_SETTLE 275
35#define MAX_12BIT ((1 << 12) - 1)
36
37static const int config_pins[] = {
38 STEPCONFIG_XPP,
39 STEPCONFIG_XNN,
40 STEPCONFIG_YPP,
41 STEPCONFIG_YNN,
42};
43
44struct titsc {
45 struct input_dev *input;
46 struct ti_tscadc_dev *mfd_tscadc;
47 unsigned int irq;
48 unsigned int wires;
49 unsigned int x_plate_resistance;
50 bool pen_down;
51 int coordinate_readouts;
52 u32 config_inp[4];
53 u32 bit_xp, bit_xn, bit_yp, bit_yn;
54 u32 inp_xp, inp_xn, inp_yp, inp_yn;
55 u32 step_mask;
56 u32 charge_delay;
57};
58
59static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
60{
61 return readl(ts->mfd_tscadc->tscadc_base + reg);
62}
63
64static void titsc_writel(struct titsc *tsc, unsigned int reg,
65 unsigned int val)
66{
67 writel(val, tsc->mfd_tscadc->tscadc_base + reg);
68}
69
70static int titsc_config_wires(struct titsc *ts_dev)
71{
72 u32 analog_line[4];
73 u32 wire_order[4];
74 int i, bit_cfg;
75
76 for (i = 0; i < 4; i++) {
77 /*
78 * Get the order in which TSC wires are attached
79 * w.r.t. each of the analog input lines on the EVM.
80 */
81 analog_line[i] = (ts_dev->config_inp[i] & 0xF0) >> 4;
82 wire_order[i] = ts_dev->config_inp[i] & 0x0F;
83 if (WARN_ON(analog_line[i] > 7))
84 return -EINVAL;
85 if (WARN_ON(wire_order[i] > ARRAY_SIZE(config_pins)))
86 return -EINVAL;
87 }
88
89 for (i = 0; i < 4; i++) {
90 int an_line;
91 int wi_order;
92
93 an_line = analog_line[i];
94 wi_order = wire_order[i];
95 bit_cfg = config_pins[wi_order];
96 if (bit_cfg == 0)
97 return -EINVAL;
98 switch (wi_order) {
99 case 0:
100 ts_dev->bit_xp = bit_cfg;
101 ts_dev->inp_xp = an_line;
102 break;
103
104 case 1:
105 ts_dev->bit_xn = bit_cfg;
106 ts_dev->inp_xn = an_line;
107 break;
108
109 case 2:
110 ts_dev->bit_yp = bit_cfg;
111 ts_dev->inp_yp = an_line;
112 break;
113 case 3:
114 ts_dev->bit_yn = bit_cfg;
115 ts_dev->inp_yn = an_line;
116 break;
117 }
118 }
119 return 0;
120}
121
122static void titsc_step_config(struct titsc *ts_dev)
123{
124 unsigned int config;
125 int i;
126 int end_step, first_step, tsc_steps;
127 u32 stepenable;
128
129 config = STEPCONFIG_MODE_HWSYNC |
130 STEPCONFIG_AVG_16 | ts_dev->bit_xp;
131 switch (ts_dev->wires) {
132 case 4:
133 config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
134 break;
135 case 5:
136 config |= ts_dev->bit_yn |
137 STEPCONFIG_INP_AN4 | ts_dev->bit_xn |
138 ts_dev->bit_yp;
139 break;
140 case 8:
141 config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
142 break;
143 }
144
145 tsc_steps = ts_dev->coordinate_readouts * 2 + 2;
146 first_step = TOTAL_STEPS - tsc_steps;
147 /* Steps 16 to 16-coordinate_readouts is for X */
148 end_step = first_step + tsc_steps;
149 for (i = end_step - ts_dev->coordinate_readouts; i < end_step; i++) {
150 titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
151 titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
152 }
153
154 config = 0;
155 config = STEPCONFIG_MODE_HWSYNC |
156 STEPCONFIG_AVG_16 | ts_dev->bit_yn |
157 STEPCONFIG_INM_ADCREFM;
158 switch (ts_dev->wires) {
159 case 4:
160 config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
161 break;
162 case 5:
163 config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 |
164 ts_dev->bit_xn | ts_dev->bit_yp;
165 break;
166 case 8:
167 config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
168 break;
169 }
170
171 /* 1 ... coordinate_readouts is for Y */
172 end_step = first_step + ts_dev->coordinate_readouts;
173 for (i = first_step; i < end_step; i++) {
174 titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
175 titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
176 }
177
178 /* Make CHARGECONFIG same as IDLECONFIG */
179
180 config = titsc_readl(ts_dev, REG_IDLECONFIG);
181 titsc_writel(ts_dev, REG_CHARGECONFIG, config);
182 titsc_writel(ts_dev, REG_CHARGEDELAY, ts_dev->charge_delay);
183
184 /* coordinate_readouts + 1 ... coordinate_readouts + 2 is for Z */
185 config = STEPCONFIG_MODE_HWSYNC |
186 STEPCONFIG_AVG_16 | ts_dev->bit_yp |
187 ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM |
188 STEPCONFIG_INP(ts_dev->inp_xp);
189 titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
190 titsc_writel(ts_dev, REG_STEPDELAY(end_step),
191 STEPCONFIG_OPENDLY);
192
193 end_step++;
194 config |= STEPCONFIG_INP(ts_dev->inp_yn);
195 titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
196 titsc_writel(ts_dev, REG_STEPDELAY(end_step),
197 STEPCONFIG_OPENDLY);
198
199 /* The steps end ... end - readouts * 2 + 2 and bit 0 for TS_Charge */
200 stepenable = 1;
201 for (i = 0; i < tsc_steps; i++)
202 stepenable |= 1 << (first_step + i + 1);
203
204 ts_dev->step_mask = stepenable;
205 am335x_tsc_se_set_cache(ts_dev->mfd_tscadc, ts_dev->step_mask);
206}
207
208static int titsc_cmp_coord(const void *a, const void *b)
209{
210 return *(int *)a - *(int *)b;
211}
212
213static void titsc_read_coordinates(struct titsc *ts_dev,
214 u32 *x, u32 *y, u32 *z1, u32 *z2)
215{
216 unsigned int yvals[7], xvals[7];
217 unsigned int i, xsum = 0, ysum = 0;
218 unsigned int creads = ts_dev->coordinate_readouts;
219
220 for (i = 0; i < creads; i++) {
221 yvals[i] = titsc_readl(ts_dev, REG_FIFO0);
222 yvals[i] &= 0xfff;
223 }
224
225 *z1 = titsc_readl(ts_dev, REG_FIFO0);
226 *z1 &= 0xfff;
227 *z2 = titsc_readl(ts_dev, REG_FIFO0);
228 *z2 &= 0xfff;
229
230 for (i = 0; i < creads; i++) {
231 xvals[i] = titsc_readl(ts_dev, REG_FIFO0);
232 xvals[i] &= 0xfff;
233 }
234
235 /*
236 * If co-ordinates readouts is less than 4 then
237 * report the average. In case of 4 or more
238 * readouts, sort the co-ordinate samples, drop
239 * min and max values and report the average of
240 * remaining values.
241 */
242 if (creads <= 3) {
243 for (i = 0; i < creads; i++) {
244 ysum += yvals[i];
245 xsum += xvals[i];
246 }
247 ysum /= creads;
248 xsum /= creads;
249 } else {
250 sort(yvals, creads, sizeof(unsigned int),
251 titsc_cmp_coord, NULL);
252 sort(xvals, creads, sizeof(unsigned int),
253 titsc_cmp_coord, NULL);
254 for (i = 1; i < creads - 1; i++) {
255 ysum += yvals[i];
256 xsum += xvals[i];
257 }
258 ysum /= creads - 2;
259 xsum /= creads - 2;
260 }
261 *y = ysum;
262 *x = xsum;
263}
264
265static irqreturn_t titsc_irq(int irq, void *dev)
266{
267 struct titsc *ts_dev = dev;
268 struct input_dev *input_dev = ts_dev->input;
269 unsigned int fsm, status, irqclr = 0;
270 unsigned int x = 0, y = 0;
271 unsigned int z1, z2, z;
272
273 status = titsc_readl(ts_dev, REG_RAWIRQSTATUS);
274 if (status & IRQENB_HW_PEN) {
275 ts_dev->pen_down = true;
276 irqclr |= IRQENB_HW_PEN;
277 }
278
279 if (status & IRQENB_PENUP) {
280 fsm = titsc_readl(ts_dev, REG_ADCFSM);
281 if (fsm == ADCFSM_STEPID) {
282 ts_dev->pen_down = false;
283 input_report_key(input_dev, BTN_TOUCH, 0);
284 input_report_abs(input_dev, ABS_PRESSURE, 0);
285 input_sync(input_dev);
286 } else {
287 ts_dev->pen_down = true;
288 }
289 irqclr |= IRQENB_PENUP;
290 }
291
292 if (status & IRQENB_EOS)
293 irqclr |= IRQENB_EOS;
294
295 /*
296 * ADC and touchscreen share the IRQ line.
297 * FIFO1 interrupts are used by ADC. Handle FIFO0 IRQs here only
298 */
299 if (status & IRQENB_FIFO0THRES) {
300
301 titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2);
302
303 if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
304 /*
305 * Calculate pressure using formula
306 * Resistance(touch) = x plate resistance *
307 * x postion/4096 * ((z2 / z1) - 1)
308 */
309 z = z1 - z2;
310 z *= x;
311 z *= ts_dev->x_plate_resistance;
312 z /= z2;
313 z = (z + 2047) >> 12;
314
315 if (z <= MAX_12BIT) {
316 input_report_abs(input_dev, ABS_X, x);
317 input_report_abs(input_dev, ABS_Y, y);
318 input_report_abs(input_dev, ABS_PRESSURE, z);
319 input_report_key(input_dev, BTN_TOUCH, 1);
320 input_sync(input_dev);
321 }
322 }
323 irqclr |= IRQENB_FIFO0THRES;
324 }
325 if (irqclr) {
326 titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
327 if (status & IRQENB_EOS)
328 am335x_tsc_se_set_cache(ts_dev->mfd_tscadc,
329 ts_dev->step_mask);
330 return IRQ_HANDLED;
331 }
332 return IRQ_NONE;
333}
334
335static int titsc_parse_dt(struct platform_device *pdev,
336 struct titsc *ts_dev)
337{
338 struct device_node *node = pdev->dev.of_node;
339 int err;
340
341 if (!node)
342 return -EINVAL;
343
344 err = of_property_read_u32(node, "ti,wires", &ts_dev->wires);
345 if (err < 0)
346 return err;
347 switch (ts_dev->wires) {
348 case 4:
349 case 5:
350 case 8:
351 break;
352 default:
353 return -EINVAL;
354 }
355
356 err = of_property_read_u32(node, "ti,x-plate-resistance",
357 &ts_dev->x_plate_resistance);
358 if (err < 0)
359 return err;
360
361 /*
362 * Try with the new binding first. If it fails, try again with
363 * bogus, miss-spelled version.
364 */
365 err = of_property_read_u32(node, "ti,coordinate-readouts",
366 &ts_dev->coordinate_readouts);
367 if (err < 0) {
368 dev_warn(&pdev->dev, "please use 'ti,coordinate-readouts' instead\n");
369 err = of_property_read_u32(node, "ti,coordiante-readouts",
370 &ts_dev->coordinate_readouts);
371 }
372
373 if (err < 0)
374 return err;
375
376 if (ts_dev->coordinate_readouts <= 0) {
377 dev_warn(&pdev->dev,
378 "invalid co-ordinate readouts, resetting it to 5\n");
379 ts_dev->coordinate_readouts = 5;
380 }
381
382 err = of_property_read_u32(node, "ti,charge-delay",
383 &ts_dev->charge_delay);
384 /*
385 * If ti,charge-delay value is not specified, then use
386 * CHARGEDLY_OPENDLY as the default value.
387 */
388 if (err < 0) {
389 ts_dev->charge_delay = CHARGEDLY_OPENDLY;
390 dev_warn(&pdev->dev, "ti,charge-delay not specified\n");
391 }
392
393 return of_property_read_u32_array(node, "ti,wire-config",
394 ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp));
395}
396
397/*
398 * The functions for inserting/removing driver as a module.
399 */
400
401static int titsc_probe(struct platform_device *pdev)
402{
403 struct titsc *ts_dev;
404 struct input_dev *input_dev;
405 struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev);
406 int err;
407
408 /* Allocate memory for device */
409 ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL);
410 input_dev = input_allocate_device();
411 if (!ts_dev || !input_dev) {
412 dev_err(&pdev->dev, "failed to allocate memory.\n");
413 err = -ENOMEM;
414 goto err_free_mem;
415 }
416
417 tscadc_dev->tsc = ts_dev;
418 ts_dev->mfd_tscadc = tscadc_dev;
419 ts_dev->input = input_dev;
420 ts_dev->irq = tscadc_dev->irq;
421
422 err = titsc_parse_dt(pdev, ts_dev);
423 if (err) {
424 dev_err(&pdev->dev, "Could not find valid DT data.\n");
425 goto err_free_mem;
426 }
427
428 err = request_irq(ts_dev->irq, titsc_irq,
429 IRQF_SHARED, pdev->dev.driver->name, ts_dev);
430 if (err) {
431 dev_err(&pdev->dev, "failed to allocate irq.\n");
432 goto err_free_mem;
433 }
434
435 titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
436 titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_EOS);
437 err = titsc_config_wires(ts_dev);
438 if (err) {
439 dev_err(&pdev->dev, "wrong i/p wire configuration\n");
440 goto err_free_irq;
441 }
442 titsc_step_config(ts_dev);
443 titsc_writel(ts_dev, REG_FIFO0THR,
444 ts_dev->coordinate_readouts * 2 + 2 - 1);
445
446 input_dev->name = "ti-tsc";
447 input_dev->dev.parent = &pdev->dev;
448
449 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
450 input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
451
452 input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
453 input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
454 input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
455
456 /* register to the input system */
457 err = input_register_device(input_dev);
458 if (err)
459 goto err_free_irq;
460
461 platform_set_drvdata(pdev, ts_dev);
462 return 0;
463
464err_free_irq:
465 free_irq(ts_dev->irq, ts_dev);
466err_free_mem:
467 input_free_device(input_dev);
468 kfree(ts_dev);
469 return err;
470}
471
472static int titsc_remove(struct platform_device *pdev)
473{
474 struct titsc *ts_dev = platform_get_drvdata(pdev);
475 u32 steps;
476
477 free_irq(ts_dev->irq, ts_dev);
478
479 /* total steps followed by the enable mask */
480 steps = 2 * ts_dev->coordinate_readouts + 2;
481 steps = (1 << steps) - 1;
482 am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps);
483
484 input_unregister_device(ts_dev->input);
485
486 kfree(ts_dev);
487 return 0;
488}
489
490#ifdef CONFIG_PM
491static int titsc_suspend(struct device *dev)
492{
493 struct titsc *ts_dev = dev_get_drvdata(dev);
494 struct ti_tscadc_dev *tscadc_dev;
495 unsigned int idle;
496
497 tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
498 if (device_may_wakeup(tscadc_dev->dev)) {
499 idle = titsc_readl(ts_dev, REG_IRQENABLE);
500 titsc_writel(ts_dev, REG_IRQENABLE,
501 (idle | IRQENB_HW_PEN));
502 titsc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB);
503 }
504 return 0;
505}
506
507static int titsc_resume(struct device *dev)
508{
509 struct titsc *ts_dev = dev_get_drvdata(dev);
510 struct ti_tscadc_dev *tscadc_dev;
511
512 tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
513 if (device_may_wakeup(tscadc_dev->dev)) {
514 titsc_writel(ts_dev, REG_IRQWAKEUP,
515 0x00);
516 titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
517 }
518 titsc_step_config(ts_dev);
519 titsc_writel(ts_dev, REG_FIFO0THR,
520 ts_dev->coordinate_readouts * 2 + 2 - 1);
521 return 0;
522}
523
524static const struct dev_pm_ops titsc_pm_ops = {
525 .suspend = titsc_suspend,
526 .resume = titsc_resume,
527};
528#define TITSC_PM_OPS (&titsc_pm_ops)
529#else
530#define TITSC_PM_OPS NULL
531#endif
532
533static const struct of_device_id ti_tsc_dt_ids[] = {
534 { .compatible = "ti,am3359-tsc", },
535 { }
536};
537MODULE_DEVICE_TABLE(of, ti_tsc_dt_ids);
538
539static struct platform_driver ti_tsc_driver = {
540 .probe = titsc_probe,
541 .remove = titsc_remove,
542 .driver = {
543 .name = "TI-am335x-tsc",
544 .pm = TITSC_PM_OPS,
545 .of_match_table = ti_tsc_dt_ids,
546 },
547};
548module_platform_driver(ti_tsc_driver);
549
550MODULE_DESCRIPTION("TI touchscreen controller driver");
551MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
552MODULE_LICENSE("GPL");