Linux Audio

Check our new training course

Loading...
v6.8
 1// SPDX-License-Identifier: GPL-2.0-or-later
 2/*
 3 * AD7879/AD7889 touchscreen (SPI bus)
 4 *
 5 * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc.
 
 
 6 */
 7
 8#include <linux/input.h>	/* BUS_SPI */
 9#include <linux/pm.h>
10#include <linux/spi/spi.h>
11#include <linux/module.h>
12#include <linux/of.h>
13#include <linux/regmap.h>
14
15#include "ad7879.h"
16
17#define AD7879_DEVID		0x7A	/* AD7879/AD7889 */
18
19#define MAX_SPI_FREQ_HZ      5000000
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
20
21#define AD7879_CMD_MAGIC     0xE0
22#define AD7879_CMD_READ      BIT(2)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
23
24static const struct regmap_config ad7879_spi_regmap_config = {
25	.reg_bits = 16,
26	.val_bits = 16,
27	.max_register = 15,
28	.read_flag_mask = AD7879_CMD_MAGIC | AD7879_CMD_READ,
29	.write_flag_mask = AD7879_CMD_MAGIC,
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
30};
31
32static int ad7879_spi_probe(struct spi_device *spi)
33{
34	struct regmap *regmap;
 
35
36	/* don't exceed max specified SPI CLK frequency */
37	if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
38		dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz);
39		return -EINVAL;
40	}
41
42	regmap = devm_regmap_init_spi(spi, &ad7879_spi_regmap_config);
43	if (IS_ERR(regmap))
44		return PTR_ERR(regmap);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
45
46	return ad7879_probe(&spi->dev, regmap, spi->irq, BUS_SPI, AD7879_DEVID);
47}
48
49#ifdef CONFIG_OF
50static const struct of_device_id ad7879_spi_dt_ids[] = {
51	{ .compatible = "adi,ad7879", },
52	{ }
53};
54MODULE_DEVICE_TABLE(of, ad7879_spi_dt_ids);
55#endif
56
57static struct spi_driver ad7879_spi_driver = {
58	.driver = {
59		.name		= "ad7879",
60		.dev_groups	= ad7879_groups,
61		.pm		= &ad7879_pm_ops,
62		.of_match_table	= of_match_ptr(ad7879_spi_dt_ids),
63	},
64	.probe		= ad7879_spi_probe,
 
65};
66
67module_spi_driver(ad7879_spi_driver);
68
69MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
70MODULE_DESCRIPTION("AD7879(-1) touchscreen SPI bus driver");
71MODULE_LICENSE("GPL");
72MODULE_ALIAS("spi:ad7879");
v4.6
 
  1/*
  2 * AD7879/AD7889 touchscreen (SPI bus)
  3 *
  4 * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc.
  5 *
  6 * Licensed under the GPL-2 or later.
  7 */
  8
  9#include <linux/input.h>	/* BUS_SPI */
 10#include <linux/pm.h>
 11#include <linux/spi/spi.h>
 12#include <linux/module.h>
 13#include <linux/of.h>
 
 14
 15#include "ad7879.h"
 16
 17#define AD7879_DEVID		0x7A	/* AD7879/AD7889 */
 18
 19#define MAX_SPI_FREQ_HZ      5000000
 20#define AD7879_CMD_MAGIC     0xE000
 21#define AD7879_CMD_READ      (1 << 10)
 22#define AD7879_CMD(reg)      (AD7879_CMD_MAGIC | ((reg) & 0xF))
 23#define AD7879_WRITECMD(reg) (AD7879_CMD(reg))
 24#define AD7879_READCMD(reg)  (AD7879_CMD(reg) | AD7879_CMD_READ)
 25
 26/*
 27 * ad7879_read/write are only used for initial setup and for sysfs controls.
 28 * The main traffic is done in ad7879_collect().
 29 */
 30
 31static int ad7879_spi_xfer(struct spi_device *spi,
 32			   u16 cmd, u8 count, u16 *tx_buf, u16 *rx_buf)
 33{
 34	struct spi_message msg;
 35	struct spi_transfer *xfers;
 36	void *spi_data;
 37	u16 *command;
 38	u16 *_rx_buf = _rx_buf; /* shut gcc up */
 39	u8 idx;
 40	int ret;
 41
 42	xfers = spi_data = kzalloc(sizeof(*xfers) * (count + 2), GFP_KERNEL);
 43	if (!spi_data)
 44		return -ENOMEM;
 45
 46	spi_message_init(&msg);
 47
 48	command = spi_data;
 49	command[0] = cmd;
 50	if (count == 1) {
 51		/* ad7879_spi_{read,write} gave us buf on stack */
 52		command[1] = *tx_buf;
 53		tx_buf = &command[1];
 54		_rx_buf = rx_buf;
 55		rx_buf = &command[2];
 56	}
 57
 58	++xfers;
 59	xfers[0].tx_buf = command;
 60	xfers[0].len = 2;
 61	spi_message_add_tail(&xfers[0], &msg);
 62	++xfers;
 63
 64	for (idx = 0; idx < count; ++idx) {
 65		if (rx_buf)
 66			xfers[idx].rx_buf = &rx_buf[idx];
 67		if (tx_buf)
 68			xfers[idx].tx_buf = &tx_buf[idx];
 69		xfers[idx].len = 2;
 70		spi_message_add_tail(&xfers[idx], &msg);
 71	}
 72
 73	ret = spi_sync(spi, &msg);
 74
 75	if (count == 1)
 76		_rx_buf[0] = command[2];
 77
 78	kfree(spi_data);
 79
 80	return ret;
 81}
 82
 83static int ad7879_spi_multi_read(struct device *dev,
 84				 u8 first_reg, u8 count, u16 *buf)
 85{
 86	struct spi_device *spi = to_spi_device(dev);
 87
 88	return ad7879_spi_xfer(spi, AD7879_READCMD(first_reg), count, NULL, buf);
 89}
 90
 91static int ad7879_spi_read(struct device *dev, u8 reg)
 92{
 93	struct spi_device *spi = to_spi_device(dev);
 94	u16 ret, dummy;
 95
 96	return ad7879_spi_xfer(spi, AD7879_READCMD(reg), 1, &dummy, &ret) ? : ret;
 97}
 98
 99static int ad7879_spi_write(struct device *dev, u8 reg, u16 val)
100{
101	struct spi_device *spi = to_spi_device(dev);
102	u16 dummy;
103
104	return ad7879_spi_xfer(spi, AD7879_WRITECMD(reg), 1, &val, &dummy);
105}
106
107static const struct ad7879_bus_ops ad7879_spi_bus_ops = {
108	.bustype	= BUS_SPI,
109	.read		= ad7879_spi_read,
110	.multi_read	= ad7879_spi_multi_read,
111	.write		= ad7879_spi_write,
112};
113
114static int ad7879_spi_probe(struct spi_device *spi)
115{
116	struct ad7879 *ts;
117	int err;
118
119	/* don't exceed max specified SPI CLK frequency */
120	if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
121		dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz);
122		return -EINVAL;
123	}
124
125	spi->bits_per_word = 16;
126	err = spi_setup(spi);
127	if (err) {
128	        dev_dbg(&spi->dev, "spi master doesn't support 16 bits/word\n");
129	        return err;
130	}
131
132	ts = ad7879_probe(&spi->dev, AD7879_DEVID, spi->irq, &ad7879_spi_bus_ops);
133	if (IS_ERR(ts))
134		return PTR_ERR(ts);
135
136	spi_set_drvdata(spi, ts);
137
138	return 0;
139}
140
141static int ad7879_spi_remove(struct spi_device *spi)
142{
143	struct ad7879 *ts = spi_get_drvdata(spi);
144
145	ad7879_remove(ts);
146
147	return 0;
148}
149
150#ifdef CONFIG_OF
151static const struct of_device_id ad7879_spi_dt_ids[] = {
152	{ .compatible = "adi,ad7879", },
153	{ }
154};
155MODULE_DEVICE_TABLE(of, ad7879_spi_dt_ids);
156#endif
157
158static struct spi_driver ad7879_spi_driver = {
159	.driver = {
160		.name	= "ad7879",
161		.pm	= &ad7879_pm_ops,
162		.of_match_table = of_match_ptr(ad7879_spi_dt_ids),
 
163	},
164	.probe		= ad7879_spi_probe,
165	.remove		= ad7879_spi_remove,
166};
167
168module_spi_driver(ad7879_spi_driver);
169
170MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
171MODULE_DESCRIPTION("AD7879(-1) touchscreen SPI bus driver");
172MODULE_LICENSE("GPL");
173MODULE_ALIAS("spi:ad7879");