Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * pata_cs5536.c - CS5536 PATA for new ATA layer
4 * (C) 2007 Martin K. Petersen <mkp@mkp.net>
5 * (C) 2011 Bartlomiej Zolnierkiewicz
6 *
7 * Documentation:
8 * Available from AMD web site.
9 *
10 * The IDE timing registers for the CS5536 live in the Geode Machine
11 * Specific Register file and not PCI config space. Most BIOSes
12 * virtualize the PCI registers so the chip looks like a standard IDE
13 * controller. Unfortunately not all implementations get this right.
14 * In particular some have problems with unaligned accesses to the
15 * virtualized PCI registers. This driver always does full dword
16 * writes to work around the issue. Also, in case of a bad BIOS this
17 * driver can be loaded with the "msr=1" parameter which forces using
18 * the Machine Specific Registers to configure the device.
19 */
20
21#include <linux/kernel.h>
22#include <linux/module.h>
23#include <linux/pci.h>
24#include <linux/blkdev.h>
25#include <linux/delay.h>
26#include <linux/libata.h>
27#include <scsi/scsi_host.h>
28#include <linux/dmi.h>
29
30#ifdef CONFIG_X86_32
31#include <asm/msr.h>
32static int use_msr;
33module_param_named(msr, use_msr, int, 0644);
34MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
35#else
36#undef rdmsr /* avoid accidental MSR usage on, e.g. x86-64 */
37#undef wrmsr
38#define rdmsr(x, y, z) do { } while (0)
39#define wrmsr(x, y, z) do { } while (0)
40#define use_msr 0
41#endif
42
43#define DRV_NAME "pata_cs5536"
44#define DRV_VERSION "0.0.8"
45
46enum {
47 MSR_IDE_CFG = 0x51300010,
48 PCI_IDE_CFG = 0x40,
49
50 CFG = 0,
51 DTC = 2,
52 CAST = 3,
53 ETC = 4,
54
55 IDE_CFG_CHANEN = (1 << 1),
56 IDE_CFG_CABLE = (1 << 17) | (1 << 16),
57
58 IDE_D0_SHIFT = 24,
59 IDE_D1_SHIFT = 16,
60 IDE_DRV_MASK = 0xff,
61
62 IDE_CAST_D0_SHIFT = 6,
63 IDE_CAST_D1_SHIFT = 4,
64 IDE_CAST_DRV_MASK = 0x3,
65 IDE_CAST_CMD_MASK = 0xff,
66 IDE_CAST_CMD_SHIFT = 24,
67
68 IDE_ETC_UDMA_MASK = 0xc0,
69};
70
71/* Some Bachmann OT200 devices have a non working UDMA support due a
72 * missing resistor.
73 */
74static const struct dmi_system_id udma_quirk_dmi_table[] = {
75 {
76 .ident = "Bachmann electronic OT200",
77 .matches = {
78 DMI_MATCH(DMI_SYS_VENDOR, "Bachmann electronic"),
79 DMI_MATCH(DMI_PRODUCT_NAME, "OT200"),
80 DMI_MATCH(DMI_PRODUCT_VERSION, "1")
81 },
82 },
83 { }
84};
85
86static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
87{
88 if (unlikely(use_msr)) {
89 u32 dummy __maybe_unused;
90
91 rdmsr(MSR_IDE_CFG + reg, *val, dummy);
92 return 0;
93 }
94
95 return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
96}
97
98static int cs5536_write(struct pci_dev *pdev, int reg, int val)
99{
100 if (unlikely(use_msr)) {
101 wrmsr(MSR_IDE_CFG + reg, val, 0);
102 return 0;
103 }
104
105 return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
106}
107
108static void cs5536_program_dtc(struct ata_device *adev, u8 tim)
109{
110 struct pci_dev *pdev = to_pci_dev(adev->link->ap->host->dev);
111 int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
112 u32 dtc;
113
114 cs5536_read(pdev, DTC, &dtc);
115 dtc &= ~(IDE_DRV_MASK << dshift);
116 dtc |= tim << dshift;
117 cs5536_write(pdev, DTC, dtc);
118}
119
120/**
121 * cs5536_cable_detect - detect cable type
122 * @ap: Port to detect on
123 *
124 * Perform cable detection for ATA66 capable cable.
125 *
126 * Returns a cable type.
127 */
128
129static int cs5536_cable_detect(struct ata_port *ap)
130{
131 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
132 u32 cfg;
133
134 cs5536_read(pdev, CFG, &cfg);
135
136 if (cfg & IDE_CFG_CABLE)
137 return ATA_CBL_PATA80;
138 else
139 return ATA_CBL_PATA40;
140}
141
142/**
143 * cs5536_set_piomode - PIO setup
144 * @ap: ATA interface
145 * @adev: device on the interface
146 */
147
148static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev)
149{
150 static const u8 drv_timings[5] = {
151 0x98, 0x55, 0x32, 0x21, 0x20,
152 };
153
154 static const u8 addr_timings[5] = {
155 0x2, 0x1, 0x0, 0x0, 0x0,
156 };
157
158 static const u8 cmd_timings[5] = {
159 0x99, 0x92, 0x90, 0x22, 0x20,
160 };
161
162 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
163 struct ata_device *pair = ata_dev_pair(adev);
164 int mode = adev->pio_mode - XFER_PIO_0;
165 int cmdmode = mode;
166 int cshift = adev->devno ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
167 u32 cast;
168
169 if (pair)
170 cmdmode = min(mode, pair->pio_mode - XFER_PIO_0);
171
172 cs5536_program_dtc(adev, drv_timings[mode]);
173
174 cs5536_read(pdev, CAST, &cast);
175
176 cast &= ~(IDE_CAST_DRV_MASK << cshift);
177 cast |= addr_timings[mode] << cshift;
178
179 cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
180 cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT;
181
182 cs5536_write(pdev, CAST, cast);
183}
184
185/**
186 * cs5536_set_dmamode - DMA timing setup
187 * @ap: ATA interface
188 * @adev: Device being configured
189 *
190 */
191
192static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev)
193{
194 static const u8 udma_timings[6] = {
195 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
196 };
197
198 static const u8 mwdma_timings[3] = {
199 0x67, 0x21, 0x20,
200 };
201
202 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
203 u32 etc;
204 int mode = adev->dma_mode;
205 int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
206
207 cs5536_read(pdev, ETC, &etc);
208
209 if (mode >= XFER_UDMA_0) {
210 etc &= ~(IDE_DRV_MASK << dshift);
211 etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
212 } else { /* MWDMA */
213 etc &= ~(IDE_ETC_UDMA_MASK << dshift);
214 cs5536_program_dtc(adev, mwdma_timings[mode - XFER_MW_DMA_0]);
215 }
216
217 cs5536_write(pdev, ETC, etc);
218}
219
220static const struct scsi_host_template cs5536_sht = {
221 ATA_BMDMA_SHT(DRV_NAME),
222};
223
224static struct ata_port_operations cs5536_port_ops = {
225 .inherits = &ata_bmdma32_port_ops,
226 .cable_detect = cs5536_cable_detect,
227 .set_piomode = cs5536_set_piomode,
228 .set_dmamode = cs5536_set_dmamode,
229};
230
231/**
232 * cs5536_init_one
233 * @dev: PCI device
234 * @id: Entry in match table
235 *
236 */
237
238static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
239{
240 static const struct ata_port_info info = {
241 .flags = ATA_FLAG_SLAVE_POSS,
242 .pio_mask = ATA_PIO4,
243 .mwdma_mask = ATA_MWDMA2,
244 .udma_mask = ATA_UDMA5,
245 .port_ops = &cs5536_port_ops,
246 };
247
248 static const struct ata_port_info no_udma_info = {
249 .flags = ATA_FLAG_SLAVE_POSS,
250 .pio_mask = ATA_PIO4,
251 .port_ops = &cs5536_port_ops,
252 };
253
254
255 const struct ata_port_info *ppi[2];
256 u32 cfg;
257
258 if (dmi_check_system(udma_quirk_dmi_table))
259 ppi[0] = &no_udma_info;
260 else
261 ppi[0] = &info;
262
263 ppi[1] = &ata_dummy_port_info;
264
265 if (use_msr)
266 dev_err(&dev->dev, DRV_NAME ": Using MSR regs instead of PCI\n");
267
268 cs5536_read(dev, CFG, &cfg);
269
270 if ((cfg & IDE_CFG_CHANEN) == 0) {
271 dev_err(&dev->dev, DRV_NAME ": disabled by BIOS\n");
272 return -ENODEV;
273 }
274
275 return ata_pci_bmdma_init_one(dev, ppi, &cs5536_sht, NULL, 0);
276}
277
278static const struct pci_device_id cs5536[] = {
279 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), },
280 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_DEV_IDE), },
281 { },
282};
283
284static struct pci_driver cs5536_pci_driver = {
285 .name = DRV_NAME,
286 .id_table = cs5536,
287 .probe = cs5536_init_one,
288 .remove = ata_pci_remove_one,
289#ifdef CONFIG_PM_SLEEP
290 .suspend = ata_pci_device_suspend,
291 .resume = ata_pci_device_resume,
292#endif
293};
294
295module_pci_driver(cs5536_pci_driver);
296
297MODULE_AUTHOR("Martin K. Petersen");
298MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
299MODULE_LICENSE("GPL");
300MODULE_DEVICE_TABLE(pci, cs5536);
301MODULE_VERSION(DRV_VERSION);
1/*
2 * pata_cs5536.c - CS5536 PATA for new ATA layer
3 * (C) 2007 Martin K. Petersen <mkp@mkp.net>
4 * (C) 2011 Bartlomiej Zolnierkiewicz
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
18 *
19 * Documentation:
20 * Available from AMD web site.
21 *
22 * The IDE timing registers for the CS5536 live in the Geode Machine
23 * Specific Register file and not PCI config space. Most BIOSes
24 * virtualize the PCI registers so the chip looks like a standard IDE
25 * controller. Unfortunately not all implementations get this right.
26 * In particular some have problems with unaligned accesses to the
27 * virtualized PCI registers. This driver always does full dword
28 * writes to work around the issue. Also, in case of a bad BIOS this
29 * driver can be loaded with the "msr=1" parameter which forces using
30 * the Machine Specific Registers to configure the device.
31 */
32
33#include <linux/kernel.h>
34#include <linux/module.h>
35#include <linux/pci.h>
36#include <linux/blkdev.h>
37#include <linux/delay.h>
38#include <linux/libata.h>
39#include <scsi/scsi_host.h>
40#include <linux/dmi.h>
41
42#ifdef CONFIG_X86_32
43#include <asm/msr.h>
44static int use_msr;
45module_param_named(msr, use_msr, int, 0644);
46MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
47#else
48#undef rdmsr /* avoid accidental MSR usage on, e.g. x86-64 */
49#undef wrmsr
50#define rdmsr(x, y, z) do { } while (0)
51#define wrmsr(x, y, z) do { } while (0)
52#define use_msr 0
53#endif
54
55#define DRV_NAME "pata_cs5536"
56#define DRV_VERSION "0.0.8"
57
58enum {
59 MSR_IDE_CFG = 0x51300010,
60 PCI_IDE_CFG = 0x40,
61
62 CFG = 0,
63 DTC = 2,
64 CAST = 3,
65 ETC = 4,
66
67 IDE_CFG_CHANEN = (1 << 1),
68 IDE_CFG_CABLE = (1 << 17) | (1 << 16),
69
70 IDE_D0_SHIFT = 24,
71 IDE_D1_SHIFT = 16,
72 IDE_DRV_MASK = 0xff,
73
74 IDE_CAST_D0_SHIFT = 6,
75 IDE_CAST_D1_SHIFT = 4,
76 IDE_CAST_DRV_MASK = 0x3,
77 IDE_CAST_CMD_MASK = 0xff,
78 IDE_CAST_CMD_SHIFT = 24,
79
80 IDE_ETC_UDMA_MASK = 0xc0,
81};
82
83/* Some Bachmann OT200 devices have a non working UDMA support due a
84 * missing resistor.
85 */
86static const struct dmi_system_id udma_quirk_dmi_table[] = {
87 {
88 .ident = "Bachmann electronic OT200",
89 .matches = {
90 DMI_MATCH(DMI_SYS_VENDOR, "Bachmann electronic"),
91 DMI_MATCH(DMI_PRODUCT_NAME, "OT200"),
92 DMI_MATCH(DMI_PRODUCT_VERSION, "1")
93 },
94 },
95 { }
96};
97
98static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
99{
100 if (unlikely(use_msr)) {
101 u32 dummy __maybe_unused;
102
103 rdmsr(MSR_IDE_CFG + reg, *val, dummy);
104 return 0;
105 }
106
107 return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
108}
109
110static int cs5536_write(struct pci_dev *pdev, int reg, int val)
111{
112 if (unlikely(use_msr)) {
113 wrmsr(MSR_IDE_CFG + reg, val, 0);
114 return 0;
115 }
116
117 return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val);
118}
119
120static void cs5536_program_dtc(struct ata_device *adev, u8 tim)
121{
122 struct pci_dev *pdev = to_pci_dev(adev->link->ap->host->dev);
123 int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
124 u32 dtc;
125
126 cs5536_read(pdev, DTC, &dtc);
127 dtc &= ~(IDE_DRV_MASK << dshift);
128 dtc |= tim << dshift;
129 cs5536_write(pdev, DTC, dtc);
130}
131
132/**
133 * cs5536_cable_detect - detect cable type
134 * @ap: Port to detect on
135 *
136 * Perform cable detection for ATA66 capable cable.
137 *
138 * Returns a cable type.
139 */
140
141static int cs5536_cable_detect(struct ata_port *ap)
142{
143 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
144 u32 cfg;
145
146 cs5536_read(pdev, CFG, &cfg);
147
148 if (cfg & IDE_CFG_CABLE)
149 return ATA_CBL_PATA80;
150 else
151 return ATA_CBL_PATA40;
152}
153
154/**
155 * cs5536_set_piomode - PIO setup
156 * @ap: ATA interface
157 * @adev: device on the interface
158 */
159
160static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev)
161{
162 static const u8 drv_timings[5] = {
163 0x98, 0x55, 0x32, 0x21, 0x20,
164 };
165
166 static const u8 addr_timings[5] = {
167 0x2, 0x1, 0x0, 0x0, 0x0,
168 };
169
170 static const u8 cmd_timings[5] = {
171 0x99, 0x92, 0x90, 0x22, 0x20,
172 };
173
174 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
175 struct ata_device *pair = ata_dev_pair(adev);
176 int mode = adev->pio_mode - XFER_PIO_0;
177 int cmdmode = mode;
178 int cshift = adev->devno ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
179 u32 cast;
180
181 if (pair)
182 cmdmode = min(mode, pair->pio_mode - XFER_PIO_0);
183
184 cs5536_program_dtc(adev, drv_timings[mode]);
185
186 cs5536_read(pdev, CAST, &cast);
187
188 cast &= ~(IDE_CAST_DRV_MASK << cshift);
189 cast |= addr_timings[mode] << cshift;
190
191 cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
192 cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT;
193
194 cs5536_write(pdev, CAST, cast);
195}
196
197/**
198 * cs5536_set_dmamode - DMA timing setup
199 * @ap: ATA interface
200 * @adev: Device being configured
201 *
202 */
203
204static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev)
205{
206 static const u8 udma_timings[6] = {
207 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
208 };
209
210 static const u8 mwdma_timings[3] = {
211 0x67, 0x21, 0x20,
212 };
213
214 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
215 u32 etc;
216 int mode = adev->dma_mode;
217 int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT;
218
219 cs5536_read(pdev, ETC, &etc);
220
221 if (mode >= XFER_UDMA_0) {
222 etc &= ~(IDE_DRV_MASK << dshift);
223 etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
224 } else { /* MWDMA */
225 etc &= ~(IDE_ETC_UDMA_MASK << dshift);
226 cs5536_program_dtc(adev, mwdma_timings[mode - XFER_MW_DMA_0]);
227 }
228
229 cs5536_write(pdev, ETC, etc);
230}
231
232static struct scsi_host_template cs5536_sht = {
233 ATA_BMDMA_SHT(DRV_NAME),
234};
235
236static struct ata_port_operations cs5536_port_ops = {
237 .inherits = &ata_bmdma32_port_ops,
238 .cable_detect = cs5536_cable_detect,
239 .set_piomode = cs5536_set_piomode,
240 .set_dmamode = cs5536_set_dmamode,
241};
242
243/**
244 * cs5536_init_one
245 * @dev: PCI device
246 * @id: Entry in match table
247 *
248 */
249
250static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
251{
252 static const struct ata_port_info info = {
253 .flags = ATA_FLAG_SLAVE_POSS,
254 .pio_mask = ATA_PIO4,
255 .mwdma_mask = ATA_MWDMA2,
256 .udma_mask = ATA_UDMA5,
257 .port_ops = &cs5536_port_ops,
258 };
259
260 static const struct ata_port_info no_udma_info = {
261 .flags = ATA_FLAG_SLAVE_POSS,
262 .pio_mask = ATA_PIO4,
263 .port_ops = &cs5536_port_ops,
264 };
265
266
267 const struct ata_port_info *ppi[2];
268 u32 cfg;
269
270 if (dmi_check_system(udma_quirk_dmi_table))
271 ppi[0] = &no_udma_info;
272 else
273 ppi[0] = &info;
274
275 ppi[1] = &ata_dummy_port_info;
276
277 if (use_msr)
278 printk(KERN_ERR DRV_NAME ": Using MSR regs instead of PCI\n");
279
280 cs5536_read(dev, CFG, &cfg);
281
282 if ((cfg & IDE_CFG_CHANEN) == 0) {
283 printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
284 return -ENODEV;
285 }
286
287 return ata_pci_bmdma_init_one(dev, ppi, &cs5536_sht, NULL, 0);
288}
289
290static const struct pci_device_id cs5536[] = {
291 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), },
292 { },
293};
294
295static struct pci_driver cs5536_pci_driver = {
296 .name = DRV_NAME,
297 .id_table = cs5536,
298 .probe = cs5536_init_one,
299 .remove = ata_pci_remove_one,
300#ifdef CONFIG_PM_SLEEP
301 .suspend = ata_pci_device_suspend,
302 .resume = ata_pci_device_resume,
303#endif
304};
305
306module_pci_driver(cs5536_pci_driver);
307
308MODULE_AUTHOR("Martin K. Petersen");
309MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
310MODULE_LICENSE("GPL");
311MODULE_DEVICE_TABLE(pci, cs5536);
312MODULE_VERSION(DRV_VERSION);