Linux Audio

Check our new training course

Loading...
v6.8
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Copyright (C) 2015 Xilinx, Inc.
  4 * CEVA AHCI SATA platform driver
  5 *
  6 * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
 
 
 
 
 
 
 
 
 
 
 
 
  7 */
  8
  9#include <linux/ahci_platform.h>
 10#include <linux/kernel.h>
 11#include <linux/libata.h>
 12#include <linux/module.h>
 13#include <linux/of.h>
 14#include <linux/platform_device.h>
 15#include <linux/reset.h>
 16#include "ahci.h"
 17
 18/* Vendor Specific Register Offsets */
 19#define AHCI_VEND_PCFG  0xA4
 20#define AHCI_VEND_PPCFG 0xA8
 21#define AHCI_VEND_PP2C  0xAC
 22#define AHCI_VEND_PP3C  0xB0
 23#define AHCI_VEND_PP4C  0xB4
 24#define AHCI_VEND_PP5C  0xB8
 25#define AHCI_VEND_AXICC 0xBC
 26#define AHCI_VEND_PAXIC 0xC0
 27#define AHCI_VEND_PTC   0xC8
 28
 29/* Vendor Specific Register bit definitions */
 30#define PAXIC_ADBW_BW64 0x1
 31#define PAXIC_MAWID(i)	(((i) * 2) << 4)
 32#define PAXIC_MARID(i)	(((i) * 2) << 12)
 33#define PAXIC_MARIDD(i)	((((i) * 2) + 1) << 16)
 34#define PAXIC_MAWIDD(i)	((((i) * 2) + 1) << 8)
 35#define PAXIC_OTL	(0x4 << 20)
 36
 37/* Register bit definitions for cache control */
 38#define AXICC_ARCA_VAL  (0xF << 0)
 39#define AXICC_ARCF_VAL  (0xF << 4)
 40#define AXICC_ARCH_VAL  (0xF << 8)
 41#define AXICC_ARCP_VAL  (0xF << 12)
 42#define AXICC_AWCFD_VAL (0xF << 16)
 43#define AXICC_AWCD_VAL  (0xF << 20)
 44#define AXICC_AWCF_VAL  (0xF << 24)
 45
 46#define PCFG_TPSS_VAL	(0x32 << 16)
 47#define PCFG_TPRS_VAL	(0x2 << 12)
 48#define PCFG_PAD_VAL	0x2
 49
 50#define PPCFG_TTA	0x1FFFE
 51#define PPCFG_PSSO_EN	(1 << 28)
 52#define PPCFG_PSS_EN	(1 << 29)
 53#define PPCFG_ESDF_EN	(1 << 31)
 54
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 55#define PP5C_RIT	0x60216
 56#define PP5C_RCT	(0x7f0 << 20)
 57
 58#define PTC_RX_WM_VAL	0x40
 59#define PTC_RSVD	(1 << 27)
 60
 61#define PORT0_BASE	0x100
 62#define PORT1_BASE	0x180
 63
 64/* Port Control Register Bit Definitions */
 65#define PORT_SCTL_SPD_GEN3	(0x3 << 4)
 66#define PORT_SCTL_SPD_GEN2	(0x2 << 4)
 67#define PORT_SCTL_SPD_GEN1	(0x1 << 4)
 68#define PORT_SCTL_IPM		(0x3 << 8)
 69
 70#define PORT_BASE	0x100
 71#define PORT_OFFSET	0x80
 72#define NR_PORTS	2
 73#define DRV_NAME	"ahci-ceva"
 74#define CEVA_FLAG_BROKEN_GEN2	1
 75
 76static unsigned int rx_watermark = PTC_RX_WM_VAL;
 77module_param(rx_watermark, uint, 0644);
 78MODULE_PARM_DESC(rx_watermark, "RxWaterMark value (0 - 0x80)");
 79
 80struct ceva_ahci_priv {
 81	struct platform_device *ahci_pdev;
 82	/* Port Phy2Cfg Register */
 83	u32 pp2c[NR_PORTS];
 84	u32 pp3c[NR_PORTS];
 85	u32 pp4c[NR_PORTS];
 86	u32 pp5c[NR_PORTS];
 87	/* Axi Cache Control Register */
 88	u32 axicc;
 89	bool is_cci_enabled;
 90	int flags;
 91};
 92
 93static unsigned int ceva_ahci_read_id(struct ata_device *dev,
 94				      struct ata_taskfile *tf, __le16 *id)
 95{
 96	u32 err_mask;
 97
 98	err_mask = ata_do_dev_read_id(dev, tf, id);
 99	if (err_mask)
100		return err_mask;
101	/*
102	 * Since CEVA controller does not support device sleep feature, we
103	 * need to clear DEVSLP (bit 8) in word78 of the IDENTIFY DEVICE data.
104	 */
105	id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8));
106
107	return 0;
108}
109
110static struct ata_port_operations ahci_ceva_ops = {
111	.inherits = &ahci_platform_ops,
112	.read_id = ceva_ahci_read_id,
113};
114
115static const struct ata_port_info ahci_ceva_port_info = {
116	.flags          = AHCI_FLAG_COMMON,
117	.pio_mask       = ATA_PIO4,
118	.udma_mask      = ATA_UDMA6,
119	.port_ops	= &ahci_ceva_ops,
120};
121
122static void ahci_ceva_setup(struct ahci_host_priv *hpriv)
123{
124	void __iomem *mmio = hpriv->mmio;
125	struct ceva_ahci_priv *cevapriv = hpriv->plat_data;
126	u32 tmp;
127	int i;
128
 
 
 
 
 
 
 
 
129	/* Set AHCI Enable */
130	tmp = readl(mmio + HOST_CTL);
131	tmp |= HOST_AHCI_EN;
132	writel(tmp, mmio + HOST_CTL);
133
134	for (i = 0; i < NR_PORTS; i++) {
135		/* TPSS TPRS scalars, CISE and Port Addr */
136		tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i);
137		writel(tmp, mmio + AHCI_VEND_PCFG);
138
139		/*
140		 * AXI Data bus width to 64
141		 * Set Mem Addr Read, Write ID for data transfers
142		 * Set Mem Addr Read ID, Write ID for non-data transfers
143		 * Transfer limit to 72 DWord
144		 */
145		tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD(i) | PAXIC_MARIDD(i) |
146			PAXIC_MAWID(i) | PAXIC_MARID(i) | PAXIC_OTL;
147		writel(tmp, mmio + AHCI_VEND_PAXIC);
148
149		/* Set AXI cache control register if CCi is enabled */
150		if (cevapriv->is_cci_enabled) {
151			tmp = readl(mmio + AHCI_VEND_AXICC);
152			tmp |= AXICC_ARCA_VAL | AXICC_ARCF_VAL |
153				AXICC_ARCH_VAL | AXICC_ARCP_VAL |
154				AXICC_AWCFD_VAL | AXICC_AWCD_VAL |
155				AXICC_AWCF_VAL;
156			writel(tmp, mmio + AHCI_VEND_AXICC);
157		}
158
159		/* Port Phy Cfg register enables */
160		tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
161		writel(tmp, mmio + AHCI_VEND_PPCFG);
162
163		/* Phy Control OOB timing parameters COMINIT */
164		writel(cevapriv->pp2c[i], mmio + AHCI_VEND_PP2C);
 
165
166		/* Phy Control OOB timing parameters COMWAKE */
167		writel(cevapriv->pp3c[i], mmio + AHCI_VEND_PP3C);
 
168
169		/* Phy Control Burst timing setting */
170		writel(cevapriv->pp4c[i], mmio + AHCI_VEND_PP4C);
 
171
172		/* Rate Change Timer and Retry Interval Timer setting */
173		writel(cevapriv->pp5c[i], mmio + AHCI_VEND_PP5C);
 
174
175		/* Rx Watermark setting  */
176		tmp = rx_watermark | PTC_RSVD;
177		writel(tmp, mmio + AHCI_VEND_PTC);
178
179		/* Default to Gen 3 Speed and Gen 1 if Gen2 is broken */
180		tmp = PORT_SCTL_SPD_GEN3 | PORT_SCTL_IPM;
181		if (cevapriv->flags & CEVA_FLAG_BROKEN_GEN2)
182			tmp = PORT_SCTL_SPD_GEN1 | PORT_SCTL_IPM;
183		writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
184	}
185}
186
187static const struct scsi_host_template ahci_platform_sht = {
188	AHCI_SHT(DRV_NAME),
189};
190
191static int ceva_ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
192{
193	int rc, i;
194
195	rc = ahci_platform_enable_regulators(hpriv);
196	if (rc)
197		return rc;
198
199	rc = ahci_platform_enable_clks(hpriv);
200	if (rc)
201		goto disable_regulator;
202
203	/* Assert the controller reset */
204	rc = ahci_platform_assert_rsts(hpriv);
205	if (rc)
206		goto disable_clks;
207
208	for (i = 0; i < hpriv->nports; i++) {
209		rc = phy_init(hpriv->phys[i]);
210		if (rc)
211			goto disable_rsts;
212	}
213
214	/* De-assert the controller reset */
215	ahci_platform_deassert_rsts(hpriv);
216
217	for (i = 0; i < hpriv->nports; i++) {
218		rc = phy_power_on(hpriv->phys[i]);
219		if (rc) {
220			phy_exit(hpriv->phys[i]);
221			goto disable_phys;
222		}
223	}
224
225	return 0;
226
227disable_rsts:
228	ahci_platform_deassert_rsts(hpriv);
229
230disable_phys:
231	while (--i >= 0) {
232		phy_power_off(hpriv->phys[i]);
233		phy_exit(hpriv->phys[i]);
234	}
235
236disable_clks:
237	ahci_platform_disable_clks(hpriv);
238
239disable_regulator:
240	ahci_platform_disable_regulators(hpriv);
241
242	return rc;
243}
244
245static int ceva_ahci_probe(struct platform_device *pdev)
246{
247	struct device_node *np = pdev->dev.of_node;
248	struct device *dev = &pdev->dev;
249	struct ahci_host_priv *hpriv;
250	struct ceva_ahci_priv *cevapriv;
251	enum dev_dma_attr attr;
252	int rc;
253
254	cevapriv = devm_kzalloc(dev, sizeof(*cevapriv), GFP_KERNEL);
255	if (!cevapriv)
256		return -ENOMEM;
257
258	cevapriv->ahci_pdev = pdev;
259	hpriv = ahci_platform_get_resources(pdev, 0);
 
260	if (IS_ERR(hpriv))
261		return PTR_ERR(hpriv);
262
263	hpriv->rsts = devm_reset_control_get_optional_exclusive(&pdev->dev,
264								NULL);
265	if (IS_ERR(hpriv->rsts))
266		return dev_err_probe(&pdev->dev, PTR_ERR(hpriv->rsts),
267				     "failed to get reset\n");
268
269	rc = ceva_ahci_platform_enable_resources(hpriv);
270	if (rc)
271		return rc;
272
273	if (of_property_read_bool(np, "ceva,broken-gen2"))
274		cevapriv->flags = CEVA_FLAG_BROKEN_GEN2;
275
276	/* Read OOB timing value for COMINIT from device-tree */
277	if (of_property_read_u8_array(np, "ceva,p0-cominit-params",
278					(u8 *)&cevapriv->pp2c[0], 4) < 0) {
279		dev_warn(dev, "ceva,p0-cominit-params property not defined\n");
280		rc = -EINVAL;
281		goto disable_resources;
282	}
283
284	if (of_property_read_u8_array(np, "ceva,p1-cominit-params",
285					(u8 *)&cevapriv->pp2c[1], 4) < 0) {
286		dev_warn(dev, "ceva,p1-cominit-params property not defined\n");
287		rc = -EINVAL;
288		goto disable_resources;
289	}
290
291	/* Read OOB timing value for COMWAKE from device-tree*/
292	if (of_property_read_u8_array(np, "ceva,p0-comwake-params",
293					(u8 *)&cevapriv->pp3c[0], 4) < 0) {
294		dev_warn(dev, "ceva,p0-comwake-params property not defined\n");
295		rc = -EINVAL;
296		goto disable_resources;
297	}
298
299	if (of_property_read_u8_array(np, "ceva,p1-comwake-params",
300					(u8 *)&cevapriv->pp3c[1], 4) < 0) {
301		dev_warn(dev, "ceva,p1-comwake-params property not defined\n");
302		rc = -EINVAL;
303		goto disable_resources;
304	}
305
306	/* Read phy BURST timing value from device-tree */
307	if (of_property_read_u8_array(np, "ceva,p0-burst-params",
308					(u8 *)&cevapriv->pp4c[0], 4) < 0) {
309		dev_warn(dev, "ceva,p0-burst-params property not defined\n");
310		rc = -EINVAL;
311		goto disable_resources;
312	}
313
314	if (of_property_read_u8_array(np, "ceva,p1-burst-params",
315					(u8 *)&cevapriv->pp4c[1], 4) < 0) {
316		dev_warn(dev, "ceva,p1-burst-params property not defined\n");
317		rc = -EINVAL;
318		goto disable_resources;
319	}
320
321	/* Read phy RETRY interval timing value from device-tree */
322	if (of_property_read_u16_array(np, "ceva,p0-retry-params",
323					(u16 *)&cevapriv->pp5c[0], 2) < 0) {
324		dev_warn(dev, "ceva,p0-retry-params property not defined\n");
325		rc = -EINVAL;
326		goto disable_resources;
327	}
328
329	if (of_property_read_u16_array(np, "ceva,p1-retry-params",
330					(u16 *)&cevapriv->pp5c[1], 2) < 0) {
331		dev_warn(dev, "ceva,p1-retry-params property not defined\n");
332		rc = -EINVAL;
333		goto disable_resources;
334	}
335
336	/*
337	 * Check if CCI is enabled for SATA. The DEV_DMA_COHERENT is returned
338	 * if CCI is enabled, so check for DEV_DMA_COHERENT.
339	 */
340	attr = device_get_dma_attr(dev);
341	cevapriv->is_cci_enabled = (attr == DEV_DMA_COHERENT);
342
343	hpriv->plat_data = cevapriv;
344
345	/* CEVA specific initialization */
346	ahci_ceva_setup(hpriv);
347
348	rc = ahci_platform_init_host(pdev, hpriv, &ahci_ceva_port_info,
349					&ahci_platform_sht);
350	if (rc)
351		goto disable_resources;
352
353	return 0;
354
355disable_resources:
356	ahci_platform_disable_resources(hpriv);
357	return rc;
358}
359
360static int __maybe_unused ceva_ahci_suspend(struct device *dev)
361{
362	return ahci_platform_suspend(dev);
363}
364
365static int __maybe_unused ceva_ahci_resume(struct device *dev)
366{
367	struct ata_host *host = dev_get_drvdata(dev);
368	struct ahci_host_priv *hpriv = host->private_data;
369	int rc;
370
371	rc = ceva_ahci_platform_enable_resources(hpriv);
372	if (rc)
373		return rc;
374
375	/* Configure CEVA specific config before resuming HBA */
376	ahci_ceva_setup(hpriv);
377
378	rc = ahci_platform_resume_host(dev);
379	if (rc)
380		goto disable_resources;
381
382	/* We resumed so update PM runtime state */
383	pm_runtime_disable(dev);
384	pm_runtime_set_active(dev);
385	pm_runtime_enable(dev);
386
387	return 0;
388
389disable_resources:
390	ahci_platform_disable_resources(hpriv);
391
392	return rc;
393}
394
395static SIMPLE_DEV_PM_OPS(ahci_ceva_pm_ops, ceva_ahci_suspend, ceva_ahci_resume);
396
397static const struct of_device_id ceva_ahci_of_match[] = {
398	{ .compatible = "ceva,ahci-1v84" },
399	{ /* sentinel */ }
400};
401MODULE_DEVICE_TABLE(of, ceva_ahci_of_match);
402
403static struct platform_driver ceva_ahci_driver = {
404	.probe = ceva_ahci_probe,
405	.remove_new = ata_platform_remove_one,
406	.driver = {
407		.name = DRV_NAME,
408		.of_match_table = ceva_ahci_of_match,
409		.pm = &ahci_ceva_pm_ops,
410	},
411};
412module_platform_driver(ceva_ahci_driver);
413
414MODULE_DESCRIPTION("CEVA AHCI SATA platform driver");
415MODULE_AUTHOR("Xilinx Inc.");
416MODULE_LICENSE("GPL v2");
v4.6
 
  1/*
  2 * Copyright (C) 2015 Xilinx, Inc.
  3 * CEVA AHCI SATA platform driver
  4 *
  5 * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
  6 *
  7 * This program is free software; you can redistribute it and/or modify it
  8 * under the terms and conditions of the GNU General Public License,
  9 * version 2, as published by the Free Software Foundation.
 10 *
 11 * This program is distributed in the hope it will be useful, but WITHOUT
 12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 13 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 14 * more details.
 15 *
 16 * You should have received a copy of the GNU General Public License along with
 17 * this program. If not, see <http://www.gnu.org/licenses/>.
 18 */
 19
 20#include <linux/ahci_platform.h>
 21#include <linux/kernel.h>
 22#include <linux/libata.h>
 23#include <linux/module.h>
 24#include <linux/of_device.h>
 25#include <linux/platform_device.h>
 
 26#include "ahci.h"
 27
 28/* Vendor Specific Register Offsets */
 29#define AHCI_VEND_PCFG  0xA4
 30#define AHCI_VEND_PPCFG 0xA8
 31#define AHCI_VEND_PP2C  0xAC
 32#define AHCI_VEND_PP3C  0xB0
 33#define AHCI_VEND_PP4C  0xB4
 34#define AHCI_VEND_PP5C  0xB8
 
 35#define AHCI_VEND_PAXIC 0xC0
 36#define AHCI_VEND_PTC   0xC8
 37
 38/* Vendor Specific Register bit definitions */
 39#define PAXIC_ADBW_BW64 0x1
 40#define PAXIC_MAWIDD	(1 << 8)
 41#define PAXIC_MARIDD	(1 << 16)
 
 
 42#define PAXIC_OTL	(0x4 << 20)
 43
 
 
 
 
 
 
 
 
 
 44#define PCFG_TPSS_VAL	(0x32 << 16)
 45#define PCFG_TPRS_VAL	(0x2 << 12)
 46#define PCFG_PAD_VAL	0x2
 47
 48#define PPCFG_TTA	0x1FFFE
 49#define PPCFG_PSSO_EN	(1 << 28)
 50#define PPCFG_PSS_EN	(1 << 29)
 51#define PPCFG_ESDF_EN	(1 << 31)
 52
 53#define PP2C_CIBGMN	0x0F
 54#define PP2C_CIBGMX	(0x25 << 8)
 55#define PP2C_CIBGN	(0x18 << 16)
 56#define PP2C_CINMP	(0x29 << 24)
 57
 58#define PP3C_CWBGMN	0x04
 59#define PP3C_CWBGMX	(0x0B << 8)
 60#define PP3C_CWBGN	(0x08 << 16)
 61#define PP3C_CWNMP	(0x0F << 24)
 62
 63#define PP4C_BMX	0x0a
 64#define PP4C_BNM	(0x08 << 8)
 65#define PP4C_SFD	(0x4a << 16)
 66#define PP4C_PTST	(0x06 << 24)
 67
 68#define PP5C_RIT	0x60216
 69#define PP5C_RCT	(0x7f0 << 20)
 70
 71#define PTC_RX_WM_VAL	0x40
 72#define PTC_RSVD	(1 << 27)
 73
 74#define PORT0_BASE	0x100
 75#define PORT1_BASE	0x180
 76
 77/* Port Control Register Bit Definitions */
 
 78#define PORT_SCTL_SPD_GEN2	(0x2 << 4)
 79#define PORT_SCTL_SPD_GEN1	(0x1 << 4)
 80#define PORT_SCTL_IPM		(0x3 << 8)
 81
 82#define PORT_BASE	0x100
 83#define PORT_OFFSET	0x80
 84#define NR_PORTS	2
 85#define DRV_NAME	"ahci-ceva"
 86#define CEVA_FLAG_BROKEN_GEN2	1
 87
 
 
 
 
 88struct ceva_ahci_priv {
 89	struct platform_device *ahci_pdev;
 
 
 
 
 
 
 
 
 90	int flags;
 91};
 92
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 93static struct ata_port_operations ahci_ceva_ops = {
 94	.inherits = &ahci_platform_ops,
 
 95};
 96
 97static const struct ata_port_info ahci_ceva_port_info = {
 98	.flags          = AHCI_FLAG_COMMON,
 99	.pio_mask       = ATA_PIO4,
100	.udma_mask      = ATA_UDMA6,
101	.port_ops	= &ahci_ceva_ops,
102};
103
104static void ahci_ceva_setup(struct ahci_host_priv *hpriv)
105{
106	void __iomem *mmio = hpriv->mmio;
107	struct ceva_ahci_priv *cevapriv = hpriv->plat_data;
108	u32 tmp;
109	int i;
110
111	/*
112	 * AXI Data bus width to 64
113	 * Set Mem Addr Read, Write ID for data transfers
114	 * Transfer limit to 72 DWord
115	 */
116	tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL;
117	writel(tmp, mmio + AHCI_VEND_PAXIC);
118
119	/* Set AHCI Enable */
120	tmp = readl(mmio + HOST_CTL);
121	tmp |= HOST_AHCI_EN;
122	writel(tmp, mmio + HOST_CTL);
123
124	for (i = 0; i < NR_PORTS; i++) {
125		/* TPSS TPRS scalars, CISE and Port Addr */
126		tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i);
127		writel(tmp, mmio + AHCI_VEND_PCFG);
128
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
129		/* Port Phy Cfg register enables */
130		tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
131		writel(tmp, mmio + AHCI_VEND_PPCFG);
132
133		/* Phy Control OOB timing parameters COMINIT */
134		tmp = PP2C_CIBGMN | PP2C_CIBGMX | PP2C_CIBGN | PP2C_CINMP;
135		writel(tmp, mmio + AHCI_VEND_PP2C);
136
137		/* Phy Control OOB timing parameters COMWAKE */
138		tmp = PP3C_CWBGMN | PP3C_CWBGMX | PP3C_CWBGN | PP3C_CWNMP;
139		writel(tmp, mmio + AHCI_VEND_PP3C);
140
141		/* Phy Control Burst timing setting */
142		tmp = PP4C_BMX | PP4C_BNM | PP4C_SFD | PP4C_PTST;
143		writel(tmp, mmio + AHCI_VEND_PP4C);
144
145		/* Rate Change Timer and Retry Interval Timer setting */
146		tmp = PP5C_RIT | PP5C_RCT;
147		writel(tmp, mmio + AHCI_VEND_PP5C);
148
149		/* Rx Watermark setting  */
150		tmp = PTC_RX_WM_VAL | PTC_RSVD;
151		writel(tmp, mmio + AHCI_VEND_PTC);
152
153		/* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */
154		tmp = PORT_SCTL_SPD_GEN2 | PORT_SCTL_IPM;
155		if (cevapriv->flags & CEVA_FLAG_BROKEN_GEN2)
156			tmp = PORT_SCTL_SPD_GEN1 | PORT_SCTL_IPM;
157		writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
158	}
159}
160
161static struct scsi_host_template ahci_platform_sht = {
162	AHCI_SHT(DRV_NAME),
163};
164
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
165static int ceva_ahci_probe(struct platform_device *pdev)
166{
167	struct device_node *np = pdev->dev.of_node;
168	struct device *dev = &pdev->dev;
169	struct ahci_host_priv *hpriv;
170	struct ceva_ahci_priv *cevapriv;
 
171	int rc;
172
173	cevapriv = devm_kzalloc(dev, sizeof(*cevapriv), GFP_KERNEL);
174	if (!cevapriv)
175		return -ENOMEM;
176
177	cevapriv->ahci_pdev = pdev;
178
179	hpriv = ahci_platform_get_resources(pdev);
180	if (IS_ERR(hpriv))
181		return PTR_ERR(hpriv);
182
183	rc = ahci_platform_enable_resources(hpriv);
 
 
 
 
 
 
184	if (rc)
185		return rc;
186
187	if (of_property_read_bool(np, "ceva,broken-gen2"))
188		cevapriv->flags = CEVA_FLAG_BROKEN_GEN2;
189
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
190	hpriv->plat_data = cevapriv;
191
192	/* CEVA specific initialization */
193	ahci_ceva_setup(hpriv);
194
195	rc = ahci_platform_init_host(pdev, hpriv, &ahci_ceva_port_info,
196					&ahci_platform_sht);
197	if (rc)
198		goto disable_resources;
199
200	return 0;
201
202disable_resources:
203	ahci_platform_disable_resources(hpriv);
204	return rc;
205}
206
207static int __maybe_unused ceva_ahci_suspend(struct device *dev)
208{
209	return ahci_platform_suspend_host(dev);
210}
211
212static int __maybe_unused ceva_ahci_resume(struct device *dev)
213{
214	return ahci_platform_resume_host(dev);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
215}
216
217static SIMPLE_DEV_PM_OPS(ahci_ceva_pm_ops, ceva_ahci_suspend, ceva_ahci_resume);
218
219static const struct of_device_id ceva_ahci_of_match[] = {
220	{ .compatible = "ceva,ahci-1v84" },
221	{},
222};
223MODULE_DEVICE_TABLE(of, ceva_ahci_of_match);
224
225static struct platform_driver ceva_ahci_driver = {
226	.probe = ceva_ahci_probe,
227	.remove = ata_platform_remove_one,
228	.driver = {
229		.name = DRV_NAME,
230		.of_match_table = ceva_ahci_of_match,
231		.pm = &ahci_ceva_pm_ops,
232	},
233};
234module_platform_driver(ceva_ahci_driver);
235
236MODULE_DESCRIPTION("CEVA AHCI SATA platform driver");
237MODULE_AUTHOR("Xilinx Inc.");
238MODULE_LICENSE("GPL v2");