1# SPDX-License-Identifier: GPL-2.0
  2if MMU
  3
  4config ARCH_MAY_HAVE_PC_FDC
  5	bool
  6	depends on BROKEN && (Q40 || SUN3X)
  7	default y
  8
  9menu "Platform devices"
 10
 11config HEARTBEAT
 12	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
 13	default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
 14	help
 15	  Use the power-on LED on your machine as a load meter.  The exact
 16	  behavior is platform-dependent, but normally the flash frequency is
 17	  a hyperbolic function of the 5-minute load average.
 18
 19# We have a dedicated heartbeat LED. :-)
 20config PROC_HARDWARE
 21	bool "/proc/hardware support"
 22	depends on PROC_FS
 23	help
 24	  Say Y here to support the /proc/hardware file, which gives you
 25	  access to information about the machine you're running on,
 26	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
 27	  and memory size.
 28
 29config NATFEAT
 30	bool "ARAnyM emulator support"
 31	depends on ATARI
 32	help
 33	  This option enables support for ARAnyM native features, such as
 34	  access to a disk image as /dev/hda.
 35
 36config NFBLOCK
 37	tristate "NatFeat block device support"
 38	depends on BLOCK && NATFEAT
 39	help
 40	  Say Y to include support for the ARAnyM NatFeat block device
 41	  which allows direct access to the hard drives without using
 42	  the hardware emulation.
 43
 44config NFCON
 45	tristate "NatFeat console driver"
 46	depends on TTY && NATFEAT
 47	help
 48	  Say Y to include support for the ARAnyM NatFeat console driver
 49	  which allows the console output to be redirected to the stderr
 50	  output of ARAnyM.
 51
 52config NFETH
 53	tristate "NatFeat Ethernet support"
 54	depends on ETHERNET && NATFEAT
 55	help
 56	  Say Y to include support for the ARAnyM NatFeat network device
 57	  which will emulate a regular ethernet device while presenting an
 58	  ethertap device to the host system.
 59
 60config ATARI_ETHERNAT
 61	bool "Atari EtherNAT Ethernet support"
 62	depends on ATARI
 63	help
 64	  Say Y to include support for the EtherNAT network adapter for the
 65	  CT/60 extension port.
 66
 67	  To compile the actual ethernet driver, choose Y or M for the SMC91X
 68	  option in the network device section; the module will be called smc91x.
 69
 70config ATARI_ETHERNEC
 71	bool "Atari EtherNEC Ethernet support"
 72	depends on ATARI_ROM_ISA
 73	help
 74	  Say Y to include support for the EtherNEC network adapter for the
 75	  ROM port. The driver works by polling instead of interrupts, so it
 76	  is quite slow.
 77
 78	  This driver also supports the ethernet part of the NetUSBee ROM
 79	  port combined Ethernet/USB adapter.
 80
 81	  To compile the actual ethernet driver, choose Y or M in for the NE2000
 82	  option in the network device section; the module will be called ne.
 83
 84endmenu
 85
 86menu "Character devices"
 87
 88config ATARI_DSP56K
 89	tristate "Atari DSP56k support"
 90	depends on ATARI
 91	help
 92	  If you want to be able to use the DSP56001 in Falcons, say Y. This
 93	  driver is still experimental, and if you don't know what it is, or
 94	  if you don't have this processor, just say N.
 95
 96	  To compile this driver as a module, choose M here.
 97
 98config AMIGA_BUILTIN_SERIAL
 99	tristate "Amiga builtin serial support"
100	depends on AMIGA && TTY
101	help
102	  If you want to use your Amiga's built-in serial port in Linux,
103	  answer Y.
104
105	  To compile this driver as a module, choose M here.
106
107config HPDCA
108	tristate "HP DCA serial support"
109	depends on DIO && SERIAL_8250
110	help
111	  If you want to use the internal "DCA" serial ports on an HP300
112	  machine, say Y here.
113
114config HPAPCI
115	tristate "HP APCI serial support"
116	depends on HP300 && SERIAL_8250
117	help
118	  If you want to use the internal "APCI" serial ports on an HP400
119	  machine, say Y here.
120
121config SERIAL_CONSOLE
122	bool "Support for serial port console"
123	depends on AMIGA_BUILTIN_SERIAL=y
124	help
125	  If you say Y here, it will be possible to use a serial port as the
126	  system console (the system console is the device which receives all
127	  kernel messages and warnings and which allows logins in single user
128	  mode). This could be useful if some terminal or printer is connected
129	  to that serial port.
130
131	  Even if you say Y here, the currently visible virtual console
132	  (/dev/tty0) will still be used as the system console by default, but
133	  you can alter that using a kernel command line option such as
134	  "console=ttyS1". (Try "man bootparam" or see the documentation of
135	  your boot loader about how to pass options to the kernel at boot
136	  time.)
137
138	  If you don't have a graphical console and you say Y here, the
139	  kernel will automatically use the first serial line, /dev/ttyS0, as
140	  system console.
141
142	  If unsure, say N.
143
144endmenu
145
146endif

 
  1if MMU
  2
  3config ARCH_MAY_HAVE_PC_FDC
  4	bool
  5	depends on BROKEN && (Q40 || SUN3X)
  6	default y
  7
  8menu "Platform devices"
  9
 10config HEARTBEAT
 11	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
 12	default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
 13	help
 14	  Use the power-on LED on your machine as a load meter.  The exact
 15	  behavior is platform-dependent, but normally the flash frequency is
 16	  a hyperbolic function of the 5-minute load average.
 17
 18# We have a dedicated heartbeat LED. :-)
 19config PROC_HARDWARE
 20	bool "/proc/hardware support"
 
 21	help
 22	  Say Y here to support the /proc/hardware file, which gives you
 23	  access to information about the machine you're running on,
 24	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
 25	  and memory size.
 26
 27config NATFEAT
 28	bool "ARAnyM emulator support"
 29	depends on ATARI
 30	help
 31	  This option enables support for ARAnyM native features, such as
 32	  access to a disk image as /dev/hda.
 33
 34config NFBLOCK
 35	tristate "NatFeat block device support"
 36	depends on BLOCK && NATFEAT
 37	help
 38	  Say Y to include support for the ARAnyM NatFeat block device
 39	  which allows direct access to the hard drives without using
 40	  the hardware emulation.
 41
 42config NFCON
 43	tristate "NatFeat console driver"
 44	depends on TTY && NATFEAT
 45	help
 46	  Say Y to include support for the ARAnyM NatFeat console driver
 47	  which allows the console output to be redirected to the stderr
 48	  output of ARAnyM.
 49
 50config NFETH
 51	tristate "NatFeat Ethernet support"
 52	depends on ETHERNET && NATFEAT
 53	help
 54	  Say Y to include support for the ARAnyM NatFeat network device
 55	  which will emulate a regular ethernet device while presenting an
 56	  ethertap device to the host system.
 57
 58config ATARI_ETHERNAT
 59	bool "Atari EtherNAT Ethernet support"
 60	depends on ATARI
 61	---help---
 62	  Say Y to include support for the EtherNAT network adapter for the
 63	  CT/60 extension port.
 64
 65	  To compile the actual ethernet driver, choose Y or M for the SMC91X
 66	  option in the network device section; the module will be called smc91x.
 67
 68config ATARI_ETHERNEC
 69	bool "Atari EtherNEC Ethernet support"
 70	depends on ATARI_ROM_ISA
 71	---help---
 72	  Say Y to include support for the EtherNEC network adapter for the
 73	  ROM port. The driver works by polling instead of interrupts, so it
 74	  is quite slow.
 75
 76	  This driver also supports the ethernet part of the NetUSBee ROM
 77	  port combined Ethernet/USB adapter.
 78
 79	  To compile the actual ethernet driver, choose Y or M in for the NE2000
 80	  option in the network device section; the module will be called ne.
 81
 82endmenu
 83
 84menu "Character devices"
 85
 86config ATARI_DSP56K
 87	tristate "Atari DSP56k support"
 88	depends on ATARI
 89	help
 90	  If you want to be able to use the DSP56001 in Falcons, say Y. This
 91	  driver is still experimental, and if you don't know what it is, or
 92	  if you don't have this processor, just say N.
 93
 94	  To compile this driver as a module, choose M here.
 95
 96config AMIGA_BUILTIN_SERIAL
 97	tristate "Amiga builtin serial support"
 98	depends on AMIGA && TTY
 99	help
100	  If you want to use your Amiga's built-in serial port in Linux,
101	  answer Y.
102
103	  To compile this driver as a module, choose M here.
104
105config HPDCA
106	tristate "HP DCA serial support"
107	depends on DIO && SERIAL_8250
108	help
109	  If you want to use the internal "DCA" serial ports on an HP300
110	  machine, say Y here.
111
112config HPAPCI
113	tristate "HP APCI serial support"
114	depends on HP300 && SERIAL_8250
115	help
116	  If you want to use the internal "APCI" serial ports on an HP400
117	  machine, say Y here.
118
119config SERIAL_CONSOLE
120	bool "Support for serial port console"
121	depends on AMIGA_BUILTIN_SERIAL=y
122	---help---
123	  If you say Y here, it will be possible to use a serial port as the
124	  system console (the system console is the device which receives all
125	  kernel messages and warnings and which allows logins in single user
126	  mode). This could be useful if some terminal or printer is connected
127	  to that serial port.
128
129	  Even if you say Y here, the currently visible virtual console
130	  (/dev/tty0) will still be used as the system console by default, but
131	  you can alter that using a kernel command line option such as
132	  "console=ttyS1". (Try "man bootparam" or see the documentation of
133	  your boot loader about how to pass options to the kernel at boot
134	  time.)
135
136	  If you don't have a graphical console and you say Y here, the
137	  kernel will automatically use the first serial line, /dev/ttyS0, as
138	  system console.
139
140	  If unsure, say N.
141
142endmenu
143
144endif