Linux Audio

Check our new training course

Loading...
Note: File does not exist in v4.6.
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * Copyright (C) 2022, Intel Corporation
  4 */
  5
  6#include "socfpga_stratix10.dtsi"
  7
  8/ {
  9	model = "SOCFPGA Stratix 10 SWVP";
 10	compatible = "altr,socfpga-stratix10-swvp", "altr,socfpga-stratix10";
 11
 12	aliases {
 13		serial0 = &uart0;
 14		serial1 = &uart1;
 15
 16		timer0 = &timer0;
 17		timer1 = &timer1;
 18		timer2 = &timer2;
 19		timer3 = &timer3;
 20
 21		ethernet0 = &gmac0;
 22		ethernet1 = &gmac1;
 23		ethernet2 = &gmac2;
 24	};
 25
 26	chosen {
 27		stdout-path = "serial1:115200n8";
 28		linux,initrd-start = <0x10000000>;
 29		linux,initrd-end = <0x125c8324>;
 30	};
 31
 32	memory@80000000 {
 33		device_type = "memory";
 34		reg = <0x0 0x0 0x0 0x80000000>;
 35	};
 36};
 37
 38&cpu0 {
 39	enable-method = "spin-table";
 40	cpu-release-addr = <0x0 0x0000fff8>;
 41};
 42
 43&cpu1 {
 44	enable-method = "spin-table";
 45	cpu-release-addr = <0x0 0x0000fff8>;
 46};
 47
 48&cpu2 {
 49	enable-method = "spin-table";
 50	cpu-release-addr = <0x0 0x0000fff8>;
 51};
 52
 53&cpu3 {
 54	enable-method = "spin-table";
 55	cpu-release-addr = <0x0 0x0000fff8>;
 56};
 57
 58&osc1 {
 59	clock-frequency = <25000000>;
 60};
 61
 62&gmac0 {
 63	status = "okay";
 64	phy-mode = "rgmii";
 65	phy-addr = <0xffffffff>;
 66	snps,max-mtu = <0x0>;
 67};
 68
 69&gmac1 {
 70	status = "okay";
 71	phy-mode = "rgmii";
 72	phy-addr = <0xffffffff>;
 73};
 74
 75&gmac2 {
 76	status = "okay";
 77	phy-mode = "rgmii";
 78	phy-addr = <0xffffffff>;
 79};
 80
 81&mmc {
 82	status = "okay";
 83	cap-sd-highspeed;
 84	cap-mmc-highspeed;
 85	broken-cd;
 86	bus-width = <4>;
 87};
 88
 89&uart0 {
 90	status = "okay";
 91};
 92
 93&uart1 {
 94	status = "okay";
 95};
 96
 97&usb0 {
 98	clocks = <&clkmgr STRATIX10_L4_MP_CLK>;
 99	status = "okay";
100};
101
102&usb1 {
103	clocks = <&clkmgr STRATIX10_L4_MP_CLK>;
104	status = "okay";
105};
106
107&rst {
108	altr,modrst-offset = <0x20>;
109};
110
111&sysmgr {
112	reg = <0xffd12000 0x1000>;
113	interrupts = <0x0 0x10 0x4>;
114	cpu1-start-addr = <0xffd06230>;
115};