1/*
  2 * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
  3 * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
  4 *
  5 * This program is free software; you can redistribute it and/or modify
  6 * it under the terms of the GNU General Public License version 2 as
  7 * published by the Free Software Foundation.
  8 */
  9#include <dt-bindings/clock/stih407-clks.h>
 10#include <dt-bindings/gpio/gpio.h>
 11#include <dt-bindings/media/c8sectpfe.h>
 12/ {
 13	soc {
 14		sbc_serial0: serial@9530000 {
 15			status = "okay";
 16		};
 17
 18		leds {
 19			compatible = "gpio-leds";
 20			red {
 21				#gpio-cells = <2>;
 22				label = "Front Panel LED";
 23				gpios = <&pio4 1 0>;
 24				linux,default-trigger = "heartbeat";
 25			};
 26			green {
 27				#gpio-cells = <2>;
 28				gpios = <&pio1 3 0>;
 29				default-state = "off";
 30			};
 31		};
 32
 33		pwm0: pwm@9810000 {
 34			status = "okay";
 35		};
 36
 37		pwm1: pwm@9510000 {
 38			status = "okay";
 39		};
 40
 41		ssc2: i2c@9842000 {
 42			status = "okay";
 43			clock-frequency = <100000>;
 44			st,i2c-min-scl-pulse-width-us = <0>;
 45			st,i2c-min-sda-pulse-width-us = <5>;
 46		};
 47
 48		ssc3: i2c@9843000 {
 49			status = "okay";
 50			clock-frequency = <100000>;
 51			st,i2c-min-scl-pulse-width-us = <0>;
 52			st,i2c-min-sda-pulse-width-us = <5>;
 53		};
 54
 55		i2c@9844000 {
 56			status = "okay";
 57		};
 58
 59		i2c@9845000 {
 60			status = "okay";
 61		};
 62
 63		i2c@9540000 {
 64			status = "okay";
 65		};
 66
 67		mmc0: sdhci@09060000 {
 68			status = "okay";
 69		};
 70
 71		mmc1: sdhci@09080000 {
 72			status = "okay";
 73		};
 74
 75		/* SSC11 to HDMI */
 76		hdmiddc: i2c@9541000 {
 77			status = "okay";
 78			/* HDMI V1.3a supports Standard mode only */
 79			clock-frequency = <100000>;
 80			st,i2c-min-scl-pulse-width-us = <0>;
 81			st,i2c-min-sda-pulse-width-us = <5>;
 82		};
 83
 84		miphy28lp_phy: miphy28lp@9b22000 {
 85
 86			phy_port0: port@9b22000 {
 87				st,osc-rdy;
 88			};
 89
 90			phy_port1: port@9b2a000 {
 91				st,osc-force-ext;
 92			};
 93		};
 94
 95		st_dwc3: dwc3@8f94000 {
 96			status = "okay";
 97		};
 98
 99		ethernet0: dwmac@9630000 {
100			st,tx-retime-src = "clkgen";
101			status = "okay";
102			phy-mode = "rgmii";
103			fixed-link = <0 1 1000 0 0>;
104		};
105
106		demux@08a20000 {
107			compatible	= "st,stih407-c8sectpfe";
108			status		= "okay";
109			reg		= <0x08a20000 0x10000>,
110					  <0x08a00000 0x4000>;
111			reg-names	= "c8sectpfe", "c8sectpfe-ram";
112			interrupts	= <GIC_SPI 34 IRQ_TYPE_NONE>,
113					  <GIC_SPI 35 IRQ_TYPE_NONE>;
114			interrupt-names	= "c8sectpfe-error-irq",
115					  "c8sectpfe-idle-irq";
116			pinctrl-0	= <&pinctrl_tsin0_serial>;
117			pinctrl-1	= <&pinctrl_tsin0_parallel>;
118			pinctrl-2	= <&pinctrl_tsin3_serial>;
119			pinctrl-3	= <&pinctrl_tsin4_serial_alt3>;
120			pinctrl-4	= <&pinctrl_tsin5_serial_alt1>;
121			pinctrl-names	= "tsin0-serial",
122					  "tsin0-parallel",
123					  "tsin3-serial",
124					  "tsin4-serial",
125					  "tsin5-serial";
126			clocks		= <&clk_s_c0_flexgen CLK_PROC_STFE>;
127			clock-names	= "c8sectpfe";
128
129			/* tsin0 is TSA on NIMA */
130			tsin0: port@0 {
131				tsin-num	= <0>;
132				serial-not-parallel;
133				i2c-bus		= <&ssc2>;
134				reset-gpios	= <&pio15 4 GPIO_ACTIVE_HIGH>;
135				dvb-card	= <STV0367_TDA18212_NIMA_1>;
136			};
137		};
138	};
139};