Loading...
Note: File does not exist in v6.8.
1/*
2 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8/dts-v1/;
9
10#include "omap443x.dtsi"
11#include "elpida_ecb240abacn.dtsi"
12
13/ {
14 model = "TI OMAP4 SDP board";
15 compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
16
17 memory {
18 device_type = "memory";
19 reg = <0x80000000 0x40000000>; /* 1 GB */
20 };
21
22 aliases {
23 display0 = &lcd0;
24 display1 = &lcd1;
25 display2 = &hdmi0;
26 };
27
28 vdd_eth: fixedregulator-vdd-eth {
29 compatible = "regulator-fixed";
30 regulator-name = "VDD_ETH";
31 regulator-min-microvolt = <3300000>;
32 regulator-max-microvolt = <3300000>;
33 gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */
34 enable-active-high;
35 regulator-boot-on;
36 };
37
38 vbat: fixedregulator-vbat {
39 compatible = "regulator-fixed";
40 regulator-name = "VBAT";
41 regulator-min-microvolt = <3750000>;
42 regulator-max-microvolt = <3750000>;
43 regulator-boot-on;
44 };
45
46 leds {
47 compatible = "gpio-leds";
48 debug0 {
49 label = "omap4:green:debug0";
50 gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
51 };
52
53 debug1 {
54 label = "omap4:green:debug1";
55 gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
56 };
57
58 debug2 {
59 label = "omap4:green:debug2";
60 gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
61 };
62
63 debug3 {
64 label = "omap4:green:debug3";
65 gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
66 };
67
68 debug4 {
69 label = "omap4:green:debug4";
70 gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
71 };
72
73 user1 {
74 label = "omap4:blue:user";
75 gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
76 };
77
78 user2 {
79 label = "omap4:red:user";
80 gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
81 };
82
83 user3 {
84 label = "omap4:green:user";
85 gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
86 };
87 };
88
89 pwmleds {
90 compatible = "pwm-leds";
91 kpad {
92 label = "omap4::keypad";
93 pwms = <&twl_pwm 0 7812500>;
94 max-brightness = <127>;
95 };
96
97 charging {
98 label = "omap4:green:chrg";
99 pwms = <&twl_pwmled 0 7812500>;
100 max-brightness = <255>;
101 };
102 };
103
104 backlight {
105 compatible = "pwm-backlight";
106 pwms = <&twl_pwm 1 7812500>;
107 brightness-levels = <
108 0 10 20 30 40
109 50 60 70 80 90
110 100 110 120 127
111 >;
112 default-brightness-level = <13>;
113 };
114
115 sound {
116 compatible = "ti,abe-twl6040";
117 ti,model = "SDP4430";
118
119 ti,jack-detection = <1>;
120 ti,mclk-freq = <38400000>;
121
122 ti,mcpdm = <&mcpdm>;
123 ti,dmic = <&dmic>;
124
125 ti,twl6040 = <&twl6040>;
126
127 /* Audio routing */
128 ti,audio-routing =
129 "Headset Stereophone", "HSOL",
130 "Headset Stereophone", "HSOR",
131 "Earphone Spk", "EP",
132 "Ext Spk", "HFL",
133 "Ext Spk", "HFR",
134 "Line Out", "AUXL",
135 "Line Out", "AUXR",
136 "Vibrator", "VIBRAL",
137 "Vibrator", "VIBRAR",
138 "HSMIC", "Headset Mic",
139 "Headset Mic", "Headset Mic Bias",
140 "MAINMIC", "Main Handset Mic",
141 "Main Handset Mic", "Main Mic Bias",
142 "SUBMIC", "Sub Handset Mic",
143 "Sub Handset Mic", "Main Mic Bias",
144 "AFML", "Line In",
145 "AFMR", "Line In",
146 "DMic", "Digital Mic",
147 "Digital Mic", "Digital Mic1 Bias";
148 };
149
150 /* regulator for wl12xx on sdio5 */
151 wl12xx_vmmc: wl12xx_vmmc {
152 pinctrl-names = "default";
153 pinctrl-0 = <&wl12xx_gpio>;
154 compatible = "regulator-fixed";
155 regulator-name = "vwl1271";
156 regulator-min-microvolt = <1800000>;
157 regulator-max-microvolt = <1800000>;
158 gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
159 startup-delay-us = <70000>;
160 enable-active-high;
161 };
162
163 tpd12s015: encoder@0 {
164 compatible = "ti,tpd12s015";
165
166 gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
167 <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
168 <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
169
170 ports {
171 #address-cells = <1>;
172 #size-cells = <0>;
173
174 port@0 {
175 reg = <0>;
176
177 tpd12s015_in: endpoint@0 {
178 remote-endpoint = <&hdmi_out>;
179 };
180 };
181
182 port@1 {
183 reg = <1>;
184
185 tpd12s015_out: endpoint@0 {
186 remote-endpoint = <&hdmi_connector_in>;
187 };
188 };
189 };
190 };
191
192 hdmi0: connector@0 {
193 compatible = "hdmi-connector";
194 label = "hdmi";
195
196 type = "c";
197
198 port {
199 hdmi_connector_in: endpoint {
200 remote-endpoint = <&tpd12s015_out>;
201 };
202 };
203 };
204};
205
206&omap4_pmx_core {
207 pinctrl-names = "default";
208 pinctrl-0 = <
209 &dss_hdmi_pins
210 &tpd12s015_pins
211 >;
212
213 uart2_pins: pinmux_uart2_pins {
214 pinctrl-single,pins = <
215 OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
216 OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
217 OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
218 OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
219 >;
220 };
221
222 uart3_pins: pinmux_uart3_pins {
223 pinctrl-single,pins = <
224 OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
225 OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
226 OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
227 OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
228 >;
229 };
230
231 uart4_pins: pinmux_uart4_pins {
232 pinctrl-single,pins = <
233 OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
234 OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
235 >;
236 };
237
238 twl6040_pins: pinmux_twl6040_pins {
239 pinctrl-single,pins = <
240 OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
241 OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
242 >;
243 };
244
245 mcpdm_pins: pinmux_mcpdm_pins {
246 pinctrl-single,pins = <
247 OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */
248 OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */
249 OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */
250 OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */
251 OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */
252 >;
253 };
254
255 dmic_pins: pinmux_dmic_pins {
256 pinctrl-single,pins = <
257 OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
258 OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
259 OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
260 OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
261 >;
262 };
263
264 mcbsp1_pins: pinmux_mcbsp1_pins {
265 pinctrl-single,pins = <
266 OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
267 OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
268 OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
269 OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
270 >;
271 };
272
273 mcbsp2_pins: pinmux_mcbsp2_pins {
274 pinctrl-single,pins = <
275 OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
276 OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
277 OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
278 OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
279 >;
280 };
281
282 mcspi1_pins: pinmux_mcspi1_pins {
283 pinctrl-single,pins = <
284 OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
285 OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
286 OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
287 OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
288 >;
289 };
290
291 dss_hdmi_pins: pinmux_dss_hdmi_pins {
292 pinctrl-single,pins = <
293 OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */
294 OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
295 OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
296 >;
297 };
298
299 tpd12s015_pins: pinmux_tpd12s015_pins {
300 pinctrl-single,pins = <
301 OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
302 OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
303 OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
304 >;
305 };
306
307 i2c1_pins: pinmux_i2c1_pins {
308 pinctrl-single,pins = <
309 OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
310 OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
311 >;
312 };
313
314 i2c2_pins: pinmux_i2c2_pins {
315 pinctrl-single,pins = <
316 OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
317 OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
318 >;
319 };
320
321 i2c3_pins: pinmux_i2c3_pins {
322 pinctrl-single,pins = <
323 OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
324 OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
325 >;
326 };
327
328 i2c4_pins: pinmux_i2c4_pins {
329 pinctrl-single,pins = <
330 OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
331 OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
332 >;
333 };
334
335 /* wl12xx GPIO output for WLAN_EN */
336 wl12xx_gpio: pinmux_wl12xx_gpio {
337 pinctrl-single,pins = <
338 OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */
339 >;
340 };
341
342 /* wl12xx GPIO inputs and SDIO pins */
343 wl12xx_pins: pinmux_wl12xx_pins {
344 pinctrl-single,pins = <
345 OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
346 OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
347 OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
348 OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
349 OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
350 OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
351 OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
352 >;
353 };
354};
355
356&i2c1 {
357 pinctrl-names = "default";
358 pinctrl-0 = <&i2c1_pins>;
359
360 clock-frequency = <400000>;
361
362 twl: twl@48 {
363 reg = <0x48>;
364 /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
365 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
366 };
367
368 twl6040: twl@4b {
369 compatible = "ti,twl6040";
370 reg = <0x4b>;
371
372 pinctrl-names = "default";
373 pinctrl-0 = <&twl6040_pins>;
374
375 /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
376 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
377 ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
378
379 vio-supply = <&v1v8>;
380 v2v1-supply = <&v2v1>;
381 enable-active-high;
382
383 /* regulators for vibra motor */
384 vddvibl-supply = <&vbat>;
385 vddvibr-supply = <&vbat>;
386
387 vibra {
388 /* Vibra driver, motor resistance parameters */
389 ti,vibldrv-res = <8>;
390 ti,vibrdrv-res = <3>;
391 ti,viblmotor-res = <10>;
392 ti,vibrmotor-res = <10>;
393 };
394 };
395};
396
397#include "twl6030.dtsi"
398#include "twl6030_omap4.dtsi"
399
400&i2c2 {
401 pinctrl-names = "default";
402 pinctrl-0 = <&i2c2_pins>;
403
404 clock-frequency = <400000>;
405};
406
407&i2c3 {
408 pinctrl-names = "default";
409 pinctrl-0 = <&i2c3_pins>;
410
411 clock-frequency = <400000>;
412
413 /*
414 * Temperature Sensor
415 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
416 */
417 tmp105@48 {
418 compatible = "ti,tmp105";
419 reg = <0x48>;
420 };
421
422 /*
423 * Ambient Light Sensor
424 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
425 */
426 bh1780@29 {
427 compatible = "rohm,bh1780";
428 reg = <0x29>;
429 };
430};
431
432&i2c4 {
433 pinctrl-names = "default";
434 pinctrl-0 = <&i2c4_pins>;
435
436 clock-frequency = <400000>;
437
438 /*
439 * 3-Axis Digital Compass
440 * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
441 */
442 hmc5843@1e {
443 compatible = "honeywell,hmc5843";
444 reg = <0x1e>;
445 };
446};
447
448&mcspi1 {
449 pinctrl-names = "default";
450 pinctrl-0 = <&mcspi1_pins>;
451
452 eth@0 {
453 compatible = "ks8851";
454 spi-max-frequency = <24000000>;
455 reg = <0>;
456 interrupt-parent = <&gpio2>;
457 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
458 vdd-supply = <&vdd_eth>;
459 };
460};
461
462&mmc1 {
463 vmmc-supply = <&vmmc>;
464 bus-width = <8>;
465};
466
467&mmc2 {
468 vmmc-supply = <&vaux1>;
469 bus-width = <8>;
470 ti,non-removable;
471};
472
473&mmc3 {
474 status = "disabled";
475};
476
477&mmc4 {
478 status = "disabled";
479};
480
481&mmc5 {
482 pinctrl-names = "default";
483 pinctrl-0 = <&wl12xx_pins>;
484 vmmc-supply = <&wl12xx_vmmc>;
485 non-removable;
486 bus-width = <4>;
487 cap-power-off-card;
488
489 #address-cells = <1>;
490 #size-cells = <0>;
491 wlcore: wlcore@2 {
492 compatible = "ti,wl1281";
493 reg = <2>;
494 interrupt-parent = <&gpio1>;
495 interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
496 ref-clock-frequency = <26000000>;
497 tcxo-clock-frequency = <26000000>;
498 };
499};
500
501&emif1 {
502 cs1-used;
503 device-handle = <&elpida_ECB240ABACN>;
504};
505
506&emif2 {
507 cs1-used;
508 device-handle = <&elpida_ECB240ABACN>;
509};
510
511&keypad {
512 keypad,num-rows = <8>;
513 keypad,num-columns = <8>;
514 linux,keymap = <0x00000012 /* KEY_E */
515 0x00010013 /* KEY_R */
516 0x00020014 /* KEY_T */
517 0x00030066 /* KEY_HOME */
518 0x0004003f /* KEY_F5 */
519 0x000500f0 /* KEY_UNKNOWN */
520 0x00060017 /* KEY_I */
521 0x0007002a /* KEY_LEFTSHIFT */
522 0x01000020 /* KEY_D*/
523 0x01010021 /* KEY_F */
524 0x01020022 /* KEY_G */
525 0x010300e7 /* KEY_SEND */
526 0x01040040 /* KEY_F6 */
527 0x010500f0 /* KEY_UNKNOWN */
528 0x01060025 /* KEY_K */
529 0x0107001c /* KEY_ENTER */
530 0x0200002d /* KEY_X */
531 0x0201002e /* KEY_C */
532 0x0202002f /* KEY_V */
533 0x0203006b /* KEY_END */
534 0x02040041 /* KEY_F7 */
535 0x020500f0 /* KEY_UNKNOWN */
536 0x02060034 /* KEY_DOT */
537 0x0207003a /* KEY_CAPSLOCK */
538 0x0300002c /* KEY_Z */
539 0x0301004e /* KEY_KPLUS */
540 0x03020030 /* KEY_B */
541 0x0303003b /* KEY_F1 */
542 0x03040042 /* KEY_F8 */
543 0x030500f0 /* KEY_UNKNOWN */
544 0x03060018 /* KEY_O */
545 0x03070039 /* KEY_SPACE */
546 0x04000011 /* KEY_W */
547 0x04010015 /* KEY_Y */
548 0x04020016 /* KEY_U */
549 0x0403003c /* KEY_F2 */
550 0x04040073 /* KEY_VOLUMEUP */
551 0x040500f0 /* KEY_UNKNOWN */
552 0x04060026 /* KEY_L */
553 0x04070069 /* KEY_LEFT */
554 0x0500001f /* KEY_S */
555 0x05010023 /* KEY_H */
556 0x05020024 /* KEY_J */
557 0x0503003d /* KEY_F3 */
558 0x05040043 /* KEY_F9 */
559 0x05050072 /* KEY_VOLUMEDOWN */
560 0x05060032 /* KEY_M */
561 0x0507006a /* KEY_RIGHT */
562 0x06000010 /* KEY_Q */
563 0x0601001e /* KEY_A */
564 0x06020031 /* KEY_N */
565 0x0603009e /* KEY_BACK */
566 0x0604000e /* KEY_BACKSPACE */
567 0x060500f0 /* KEY_UNKNOWN */
568 0x06060019 /* KEY_P */
569 0x06070067 /* KEY_UP */
570 0x07000094 /* KEY_PROG1 */
571 0x07010095 /* KEY_PROG2 */
572 0x070200ca /* KEY_PROG3 */
573 0x070300cb /* KEY_PROG4 */
574 0x0704003e /* KEY_F4 */
575 0x070500f0 /* KEY_UNKNOWN */
576 0x07060160 /* KEY_OK */
577 0x0707006c>; /* KEY_DOWN */
578 linux,input-no-autorepeat;
579};
580
581&uart2 {
582 interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
583 &omap4_pmx_core OMAP4_UART2_RX>;
584 pinctrl-names = "default";
585 pinctrl-0 = <&uart2_pins>;
586};
587
588&uart3 {
589 interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
590 &omap4_pmx_core OMAP4_UART3_RX>;
591 pinctrl-names = "default";
592 pinctrl-0 = <&uart3_pins>;
593};
594
595&uart4 {
596 interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
597 &omap4_pmx_core OMAP4_UART4_RX>;
598 pinctrl-names = "default";
599 pinctrl-0 = <&uart4_pins>;
600};
601
602&mcbsp1 {
603 pinctrl-names = "default";
604 pinctrl-0 = <&mcbsp1_pins>;
605 status = "okay";
606};
607
608&mcbsp2 {
609 pinctrl-names = "default";
610 pinctrl-0 = <&mcbsp2_pins>;
611 status = "okay";
612};
613
614&dmic {
615 pinctrl-names = "default";
616 pinctrl-0 = <&dmic_pins>;
617 status = "okay";
618};
619
620&mcpdm {
621 pinctrl-names = "default";
622 pinctrl-0 = <&mcpdm_pins>;
623 status = "okay";
624};
625
626&twl_usb_comparator {
627 usb-supply = <&vusb>;
628};
629
630&usb_otg_hs {
631 interface-type = <1>;
632 mode = <3>;
633 power = <50>;
634};
635
636&dss {
637 status = "ok";
638};
639
640&dsi1 {
641 status = "ok";
642 vdd-supply = <&vcxio>;
643
644 port {
645 dsi1_out_ep: endpoint {
646 remote-endpoint = <&lcd0_in>;
647 lanes = <0 1 2 3 4 5>;
648 };
649 };
650
651 lcd0: display {
652 compatible = "tpo,taal", "panel-dsi-cm";
653 label = "lcd0";
654
655 reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
656
657 port {
658 lcd0_in: endpoint {
659 remote-endpoint = <&dsi1_out_ep>;
660 };
661 };
662 };
663};
664
665&dsi2 {
666 status = "ok";
667 vdd-supply = <&vcxio>;
668
669 port {
670 dsi2_out_ep: endpoint {
671 remote-endpoint = <&lcd1_in>;
672 lanes = <0 1 2 3 4 5>;
673 };
674 };
675
676 lcd1: display {
677 compatible = "tpo,taal", "panel-dsi-cm";
678 label = "lcd1";
679
680 reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
681
682 port {
683 lcd1_in: endpoint {
684 remote-endpoint = <&dsi2_out_ep>;
685 };
686 };
687 };
688};
689
690&hdmi {
691 status = "ok";
692 vdda-supply = <&vdac>;
693
694 port {
695 hdmi_out: endpoint {
696 remote-endpoint = <&tpd12s015_in>;
697 };
698 };
699};