1/*
  2 * Device Tree file for LaCie 5Big Network v2
  3 *
  4 * Copyright (C) 2014
  5 *
  6 * Andrew Lunn <andrew@lunn.ch>
  7 *
  8 * Based on netxbig_v2-setup.c,
  9 * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
 10 *
 11 * This file is licensed under the terms of the GNU General Public
 12 * License version 2.  This program is licensed "as is" without any
 13 * warranty of any kind, whether express or implied.
 14*/
 15
 16/dts-v1/;
 17
 18#include "kirkwood.dtsi"
 19#include "kirkwood-6281.dtsi"
 20#include "kirkwood-netxbig.dtsi"
 21
 22/ {
 23	model = "LaCie 5Big Network v2";
 24	compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 25
 26	memory {
 27		device_type = "memory";
 28		reg = <0x00000000 0x20000000>;
 29	};
 30
 31};
 32
 33&regulators {
 34	regulator@2 {
 35		compatible = "regulator-fixed";
 36		reg = <2>;
 37		regulator-name = "hdd1power";
 38		regulator-min-microvolt = <5000000>;
 39		regulator-max-microvolt = <5000000>;
 40		enable-active-high;
 41		regulator-always-on;
 42		regulator-boot-on;
 43		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 44	};
 45
 46	regulator@3 {
 47		compatible = "regulator-fixed";
 48		reg = <3>;
 49		regulator-name = "hdd2power";
 50		regulator-min-microvolt = <5000000>;
 51		regulator-max-microvolt = <5000000>;
 52		enable-active-high;
 53		regulator-always-on;
 54		regulator-boot-on;
 55		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 56	};
 57
 58	regulator@4 {
 59		compatible = "regulator-fixed";
 60		reg = <4>;
 61		regulator-name = "hdd3power";
 62		regulator-min-microvolt = <5000000>;
 63		regulator-max-microvolt = <5000000>;
 64		enable-active-high;
 65		regulator-always-on;
 66		regulator-boot-on;
 67		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 68	};
 69
 70	regulator@5 {
 71		compatible = "regulator-fixed";
 72		reg = <5>;
 73		regulator-name = "hdd4power";
 74		regulator-min-microvolt = <5000000>;
 75		regulator-max-microvolt = <5000000>;
 76		enable-active-high;
 77		regulator-always-on;
 78		regulator-boot-on;
 79		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 80	};
 81
 82	clocks {
 83	       g762_clk: g762-oscillator {
 84			 compatible = "fixed-clock";
 85			 #clock-cells = <0>;
 86			 clock-frequency = <32768>;
 87	       };
 88	};
 89
 90	netxbig-leds {
 91		blue-sata2 {
 92			label = "netxbig:blue:sata2";
 93			mode-addr = <5>;
 94			mode-val = <NETXBIG_LED_OFF 0
 95				    NETXBIG_LED_ON 7
 96				    NETXBIG_LED_SATA 1
 97				    NETXBIG_LED_TIMER1 3>;
 98			bright-addr = <2>;
 99			max-brightness = <7>;
100		};
101		red-sata2 {
102			label = "netxbig:red:sata2";
103			mode-addr = <5>;
104			mode-val = <NETXBIG_LED_OFF 0
105				    NETXBIG_LED_ON 2
106				    NETXBIG_LED_TIMER1 4>;
107			bright-addr = <2>;
108			max-brightness = <7>;
109		};
110		blue-sata3 {
111			label = "netxbig:blue:sata3";
112			mode-addr = <6>;
113			mode-val = <NETXBIG_LED_OFF 0
114				    NETXBIG_LED_ON 7
115				    NETXBIG_LED_SATA 1
116				    NETXBIG_LED_TIMER1 3>;
117			bright-addr = <2>;
118			max-brightness = <7>;
119		};
120		red-sata3 {
121			label = "netxbig:red:sata3";
122			mode-addr = <6>;
123			mode-val = <NETXBIG_LED_OFF 0
124				    NETXBIG_LED_ON 2
125				    NETXBIG_LED_TIMER1 4>;
126			bright-addr = <2>;
127			max-brightness = <7>;
128		};
129		blue-sata4 {
130			label = "netxbig:blue:sata4";
131			mode-addr = <7>;
132			mode-val = <NETXBIG_LED_OFF 0
133				    NETXBIG_LED_ON 7
134				    NETXBIG_LED_SATA 1
135				    NETXBIG_LED_TIMER1 3>;
136			bright-addr = <2>;
137			max-brightness = <7>;
138		};
139		red-sata4 {
140			label = "netxbig:red:sata4";
141			mode-addr = <7>;
142			mode-val = <NETXBIG_LED_OFF 0
143				    NETXBIG_LED_ON 2
144				    NETXBIG_LED_TIMER1 4>;
145			bright-addr = <2>;
146			max-brightness = <7>;
147		};
148	};
149};
150
151&mdio {
152	ethphy1: ethernet-phy@1 {
153		reg = <0>;
154	};
155};
156
157&eth1 {
158	status = "okay";
159	ethernet1-port@0 {
160		phy-handle = <&ethphy1>;
161	};
162};
163
164
165&i2c0 {
166	g762@3e {
167		compatible = "gmt,g762";
168		reg = <0x3e>;
169		clocks = <&g762_clk>;
170	};
171};