1/dts-v1/;
  2
  3#include "kirkwood.dtsi"
  4#include "kirkwood-6281.dtsi"
  5
  6/ {
  7	model = "Iomega StorCenter ix2-200";
  8	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
  9
 10	memory {
 11		device_type = "memory";
 12		reg = <0x00000000 0x10000000>;
 13	};
 14
 15	chosen {
 16		bootargs = "console=ttyS0,115200n8 earlyprintk";
 17		stdout-path = &uart0;
 18	};
 19
 20	ocp@f1000000 {
 21		pinctrl: pin-controller@10000 {
 22			pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
 23				      &pmx_led_sata_brt_ctrl_2
 24				      &pmx_led_backup_brt_ctrl_1
 25				      &pmx_led_backup_brt_ctrl_2
 26				      &pmx_led_power_brt_ctrl_1
 27				      &pmx_led_power_brt_ctrl_2
 28				      &pmx_led_health_brt_ctrl_1
 29				      &pmx_led_health_brt_ctrl_2
 30				      &pmx_led_rebuild_brt_ctrl_1
 31				      &pmx_led_rebuild_brt_ctrl_2 >;
 32			pinctrl-names = "default";
 33
 34			pmx_button_reset: pmx-button-reset {
 35				marvell,pins = "mpp12";
 36				marvell,function = "gpio";
 37			};
 38			pmx_button_power: pmx-button-power {
 39				marvell,pins = "mpp14";
 40				marvell,function = "gpio";
 41			};
 42			pmx_led_backup: pmx-led-backup {
 43				marvell,pins = "mpp15";
 44				marvell,function = "gpio";
 45			};
 46			pmx_led_power: pmx-led-power {
 47				marvell,pins = "mpp16";
 48				marvell,function = "gpio";
 49			};
 50			pmx_button_otb: pmx-button-otb {
 51				marvell,pins = "mpp35";
 52				marvell,function = "gpio";
 53			};
 54			pmx_led_rebuild: pmx-led-rebuild {
 55				marvell,pins = "mpp36";
 56				marvell,function = "gpio";
 57			};
 58			pmx_led_health: pmx-led_health {
 59				marvell,pins = "mpp37";
 60				marvell,function = "gpio";
 61			};
 62			pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
 63				marvell,pins = "mpp38";
 64				marvell,function = "gpio";
 65			};
 66			pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
 67				marvell,pins = "mpp39";
 68				marvell,function = "gpio";
 69			};
 70			pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
 71				marvell,pins = "mpp40";
 72				marvell,function = "gpio";
 73			};
 74			pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
 75				marvell,pins = "mpp41";
 76				marvell,function = "gpio";
 77			};
 78			pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
 79				marvell,pins = "mpp42";
 80				marvell,function = "gpio";
 81			};
 82			pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
 83				marvell,pins = "mpp43";
 84				marvell,function = "gpio";
 85			};
 86			pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
 87				marvell,pins = "mpp44";
 88				marvell,function = "gpio";
 89			};
 90			pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
 91				marvell,pins = "mpp45";
 92				marvell,function = "gpio";
 93			};
 94			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
 95				marvell,pins = "mpp46";
 96				marvell,function = "gpio";
 97			};
 98			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
 99				marvell,pins = "mpp47";
100				marvell,function = "gpio";
101			};
102
103		};
104		i2c@11000 {
105			status = "okay";
106
107			lm63: lm63@4c {
108				compatible = "national,lm63";
109				reg = <0x4c>;
110			};
111		};
112
113		serial@12000 {
114			status = "ok";
115		};
116
117		sata@80000 {
118			status = "okay";
119			nr-ports = <2>;
120		};
121
122	};
123	gpio-leds {
124		compatible = "gpio-leds";
125		pinctrl-0 = < &pmx_led_backup &pmx_led_power
126			      &pmx_led_rebuild &pmx_led_health >;
127		pinctrl-names = "default";
128
129		power_led {
130			label = "status:white:power_led";
131			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
132			default-state = "keep";
133		};
134		rebuild_led {
135			label = "status:white:rebuild_led";
136			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
137		};
138		health_led {
139			label = "status:red:health_led";
140			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
141		};
142		backup_led {
143			label = "status:blue:backup_led";
144			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
145		};
146	};
147	gpio-keys {
148		compatible = "gpio-keys";
149		#address-cells = <1>;
150		#size-cells = <0>;
151		pinctrl-0 = <&pmx_button_reset &pmx_button_power
152			     &pmx_button_otb>;
153		pinctrl-names = "default";
154
155
156		Power {
157			label = "Power Button";
158			linux,code = <KEY_POWER>;
159			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
160		};
161		Reset {
162			label = "Reset Button";
163			linux,code = <KEY_RESTART>;
164			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
165		};
166		OTB {
167			label = "OTB Button";
168			linux,code = <KEY_COPY>;
169			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
170		};
171	};
172	gpio-poweroff {
173		compatible = "gpio-poweroff";
174		gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
175	};
176};
177
178&nand {
179	status = "okay";
180
181	partition@0 {
182		label = "u-boot";
183		reg = <0x0000000 0x100000>;
184		read-only;
185	};
186
187	partition@a0000 {
188		label = "env";
189		reg = <0xa0000 0x20000>;
190		read-only;
191	};
192
193	partition@100000 {
194		label = "uImage";
195		reg = <0x100000 0x300000>;
196	};
197
198	partition@400000 {
199		label = "rootfs";
200		reg = <0x400000 0x1C00000>;
201	};
202};
203
204&mdio {
205	status = "okay";
206
207	ethphy1: ethernet-phy@11 {
208		reg = <11>;
209	};
210};
211
212&eth0 {
213	status = "okay";
214	ethernet0-port@0 {
215		speed = <1000>;
216		duplex = <1>;
217	};
218};
219
220&eth1 {
221	status = "okay";
222	ethernet1-port@0 {
223		phy-handle = <&ethphy1>;
224	};
225};