Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * (C) Copyright David Brownell 2000-2002
4 */
5
6#include <linux/kernel.h>
7#include <linux/module.h>
8#include <linux/pci.h>
9#include <linux/usb.h>
10#include <linux/usb/hcd.h>
11
12#include <asm/io.h>
13#include <asm/irq.h>
14
15#ifdef CONFIG_PPC_PMAC
16#include <asm/machdep.h>
17#include <asm/pmac_feature.h>
18#endif
19
20#include "usb.h"
21
22
23/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
24
25/*
26 * Coordinate handoffs between EHCI and companion controllers
27 * during EHCI probing and system resume.
28 */
29
30static DECLARE_RWSEM(companions_rwsem);
31
32#define CL_UHCI PCI_CLASS_SERIAL_USB_UHCI
33#define CL_OHCI PCI_CLASS_SERIAL_USB_OHCI
34#define CL_EHCI PCI_CLASS_SERIAL_USB_EHCI
35
36static inline int is_ohci_or_uhci(struct pci_dev *pdev)
37{
38 return pdev->class == CL_OHCI || pdev->class == CL_UHCI;
39}
40
41typedef void (*companion_fn)(struct pci_dev *pdev, struct usb_hcd *hcd,
42 struct pci_dev *companion, struct usb_hcd *companion_hcd);
43
44/* Iterate over PCI devices in the same slot as pdev and call fn for each */
45static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd,
46 companion_fn fn)
47{
48 struct pci_dev *companion;
49 struct usb_hcd *companion_hcd;
50 unsigned int slot = PCI_SLOT(pdev->devfn);
51
52 /*
53 * Iterate through other PCI functions in the same slot.
54 * If the function's drvdata isn't set then it isn't bound to
55 * a USB host controller driver, so skip it.
56 */
57 companion = NULL;
58 for_each_pci_dev(companion) {
59 if (companion->bus != pdev->bus ||
60 PCI_SLOT(companion->devfn) != slot)
61 continue;
62
63 /*
64 * Companion device should be either UHCI,OHCI or EHCI host
65 * controller, otherwise skip.
66 */
67 if (companion->class != CL_UHCI && companion->class != CL_OHCI &&
68 companion->class != CL_EHCI)
69 continue;
70
71 companion_hcd = pci_get_drvdata(companion);
72 if (!companion_hcd || !companion_hcd->self.root_hub)
73 continue;
74 fn(pdev, hcd, companion, companion_hcd);
75 }
76}
77
78/*
79 * We're about to add an EHCI controller, which will unceremoniously grab
80 * all the port connections away from its companions. To prevent annoying
81 * error messages, lock the companion's root hub and gracefully unconfigure
82 * it beforehand. Leave it locked until the EHCI controller is all set.
83 */
84static void ehci_pre_add(struct pci_dev *pdev, struct usb_hcd *hcd,
85 struct pci_dev *companion, struct usb_hcd *companion_hcd)
86{
87 struct usb_device *udev;
88
89 if (is_ohci_or_uhci(companion)) {
90 udev = companion_hcd->self.root_hub;
91 usb_lock_device(udev);
92 usb_set_configuration(udev, 0);
93 }
94}
95
96/*
97 * Adding the EHCI controller has either succeeded or failed. Set the
98 * companion pointer accordingly, and in either case, reconfigure and
99 * unlock the root hub.
100 */
101static void ehci_post_add(struct pci_dev *pdev, struct usb_hcd *hcd,
102 struct pci_dev *companion, struct usb_hcd *companion_hcd)
103{
104 struct usb_device *udev;
105
106 if (is_ohci_or_uhci(companion)) {
107 if (dev_get_drvdata(&pdev->dev)) { /* Succeeded */
108 dev_dbg(&pdev->dev, "HS companion for %s\n",
109 dev_name(&companion->dev));
110 companion_hcd->self.hs_companion = &hcd->self;
111 }
112 udev = companion_hcd->self.root_hub;
113 usb_set_configuration(udev, 1);
114 usb_unlock_device(udev);
115 }
116}
117
118/*
119 * We just added a non-EHCI controller. Find the EHCI controller to
120 * which it is a companion, and store a pointer to the bus structure.
121 */
122static void non_ehci_add(struct pci_dev *pdev, struct usb_hcd *hcd,
123 struct pci_dev *companion, struct usb_hcd *companion_hcd)
124{
125 if (is_ohci_or_uhci(pdev) && companion->class == CL_EHCI) {
126 dev_dbg(&pdev->dev, "FS/LS companion for %s\n",
127 dev_name(&companion->dev));
128 hcd->self.hs_companion = &companion_hcd->self;
129 }
130}
131
132/* We are removing an EHCI controller. Clear the companions' pointers. */
133static void ehci_remove(struct pci_dev *pdev, struct usb_hcd *hcd,
134 struct pci_dev *companion, struct usb_hcd *companion_hcd)
135{
136 if (is_ohci_or_uhci(companion))
137 companion_hcd->self.hs_companion = NULL;
138}
139
140#ifdef CONFIG_PM
141
142/* An EHCI controller must wait for its companions before resuming. */
143static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd,
144 struct pci_dev *companion, struct usb_hcd *companion_hcd)
145{
146 if (is_ohci_or_uhci(companion))
147 device_pm_wait_for_dev(&pdev->dev, &companion->dev);
148}
149
150#endif /* CONFIG_PM */
151
152/*-------------------------------------------------------------------------*/
153
154/* configure so an HC device and id are always provided */
155/* always called with process context; sleeping is OK */
156
157/**
158 * usb_hcd_pci_probe - initialize PCI-based HCDs
159 * @dev: USB Host Controller being probed
160 * @driver: USB HC driver handle
161 *
162 * Context: task context, might sleep
163 *
164 * Allocates basic PCI resources for this USB host controller, and
165 * then invokes the start() method for the HCD associated with it
166 * through the hotplug entry's driver_data.
167 *
168 * Store this function in the HCD's struct pci_driver as probe().
169 *
170 * Return: 0 if successful.
171 */
172int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver)
173{
174 struct usb_hcd *hcd;
175 int retval;
176 int hcd_irq = 0;
177
178 if (usb_disabled())
179 return -ENODEV;
180
181 if (!driver)
182 return -EINVAL;
183
184 if (pci_enable_device(dev) < 0)
185 return -ENODEV;
186
187 /*
188 * The xHCI driver has its own irq management
189 * make sure irq setup is not touched for xhci in generic hcd code
190 */
191 if ((driver->flags & HCD_MASK) < HCD_USB3) {
192 retval = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY | PCI_IRQ_MSI);
193 if (retval < 0) {
194 dev_err(&dev->dev,
195 "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
196 pci_name(dev));
197 retval = -ENODEV;
198 goto disable_pci;
199 }
200 hcd_irq = pci_irq_vector(dev, 0);
201 }
202
203 hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
204 if (!hcd) {
205 retval = -ENOMEM;
206 goto free_irq_vectors;
207 }
208
209 hcd->amd_resume_bug = usb_hcd_amd_resume_bug(dev, driver);
210
211 if (driver->flags & HCD_MEMORY) {
212 /* EHCI, OHCI */
213 hcd->rsrc_start = pci_resource_start(dev, 0);
214 hcd->rsrc_len = pci_resource_len(dev, 0);
215 if (!devm_request_mem_region(&dev->dev, hcd->rsrc_start,
216 hcd->rsrc_len, driver->description)) {
217 dev_dbg(&dev->dev, "controller already in use\n");
218 retval = -EBUSY;
219 goto put_hcd;
220 }
221 hcd->regs = devm_ioremap(&dev->dev, hcd->rsrc_start,
222 hcd->rsrc_len);
223 if (hcd->regs == NULL) {
224 dev_dbg(&dev->dev, "error mapping memory\n");
225 retval = -EFAULT;
226 goto put_hcd;
227 }
228
229 } else {
230 /* UHCI */
231 int region;
232
233 for (region = 0; region < PCI_STD_NUM_BARS; region++) {
234 if (!(pci_resource_flags(dev, region) &
235 IORESOURCE_IO))
236 continue;
237
238 hcd->rsrc_start = pci_resource_start(dev, region);
239 hcd->rsrc_len = pci_resource_len(dev, region);
240 if (devm_request_region(&dev->dev, hcd->rsrc_start,
241 hcd->rsrc_len, driver->description))
242 break;
243 }
244 if (region == PCI_STD_NUM_BARS) {
245 dev_dbg(&dev->dev, "no i/o regions available\n");
246 retval = -EBUSY;
247 goto put_hcd;
248 }
249 }
250
251 pci_set_master(dev);
252
253 /* Note: dev_set_drvdata must be called while holding the rwsem */
254 if (dev->class == CL_EHCI) {
255 down_write(&companions_rwsem);
256 dev_set_drvdata(&dev->dev, hcd);
257 for_each_companion(dev, hcd, ehci_pre_add);
258 retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
259 if (retval != 0)
260 dev_set_drvdata(&dev->dev, NULL);
261 for_each_companion(dev, hcd, ehci_post_add);
262 up_write(&companions_rwsem);
263 } else {
264 down_read(&companions_rwsem);
265 dev_set_drvdata(&dev->dev, hcd);
266 retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
267 if (retval != 0)
268 dev_set_drvdata(&dev->dev, NULL);
269 else
270 for_each_companion(dev, hcd, non_ehci_add);
271 up_read(&companions_rwsem);
272 }
273
274 if (retval != 0)
275 goto put_hcd;
276 device_wakeup_enable(hcd->self.controller);
277
278 if (pci_dev_run_wake(dev))
279 pm_runtime_put_noidle(&dev->dev);
280 return retval;
281
282put_hcd:
283 usb_put_hcd(hcd);
284free_irq_vectors:
285 if ((driver->flags & HCD_MASK) < HCD_USB3)
286 pci_free_irq_vectors(dev);
287disable_pci:
288 pci_disable_device(dev);
289 dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
290 return retval;
291}
292EXPORT_SYMBOL_GPL(usb_hcd_pci_probe);
293
294
295/* may be called without controller electrically present */
296/* may be called with controller, bus, and devices active */
297
298/**
299 * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
300 * @dev: USB Host Controller being removed
301 *
302 * Context: task context, might sleep
303 *
304 * Reverses the effect of usb_hcd_pci_probe(), first invoking
305 * the HCD's stop() method. It is always called from a thread
306 * context, normally "rmmod", "apmd", or something similar.
307 *
308 * Store this function in the HCD's struct pci_driver as remove().
309 */
310void usb_hcd_pci_remove(struct pci_dev *dev)
311{
312 struct usb_hcd *hcd;
313 int hcd_driver_flags;
314
315 hcd = pci_get_drvdata(dev);
316 if (!hcd)
317 return;
318
319 hcd_driver_flags = hcd->driver->flags;
320
321 if (pci_dev_run_wake(dev))
322 pm_runtime_get_noresume(&dev->dev);
323
324 /* Fake an interrupt request in order to give the driver a chance
325 * to test whether the controller hardware has been removed (e.g.,
326 * cardbus physical eject).
327 */
328 local_irq_disable();
329 usb_hcd_irq(0, hcd);
330 local_irq_enable();
331
332 /* Note: dev_set_drvdata must be called while holding the rwsem */
333 if (dev->class == CL_EHCI) {
334 down_write(&companions_rwsem);
335 for_each_companion(dev, hcd, ehci_remove);
336 usb_remove_hcd(hcd);
337 dev_set_drvdata(&dev->dev, NULL);
338 up_write(&companions_rwsem);
339 } else {
340 /* Not EHCI; just clear the companion pointer */
341 down_read(&companions_rwsem);
342 hcd->self.hs_companion = NULL;
343 usb_remove_hcd(hcd);
344 dev_set_drvdata(&dev->dev, NULL);
345 up_read(&companions_rwsem);
346 }
347 usb_put_hcd(hcd);
348 if ((hcd_driver_flags & HCD_MASK) < HCD_USB3)
349 pci_free_irq_vectors(dev);
350 pci_disable_device(dev);
351}
352EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
353
354/**
355 * usb_hcd_pci_shutdown - shutdown host controller
356 * @dev: USB Host Controller being shutdown
357 */
358void usb_hcd_pci_shutdown(struct pci_dev *dev)
359{
360 struct usb_hcd *hcd;
361
362 hcd = pci_get_drvdata(dev);
363 if (!hcd)
364 return;
365
366 if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
367 hcd->driver->shutdown) {
368 hcd->driver->shutdown(hcd);
369 if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
370 free_irq(hcd->irq, hcd);
371 pci_disable_device(dev);
372 }
373}
374EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
375
376#ifdef CONFIG_PM
377
378#ifdef CONFIG_PPC_PMAC
379static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
380{
381 /* Enanble or disable ASIC clocks for USB */
382 if (machine_is(powermac)) {
383 struct device_node *of_node;
384
385 of_node = pci_device_to_OF_node(pci_dev);
386 if (of_node)
387 pmac_call_feature(PMAC_FTR_USB_ENABLE,
388 of_node, 0, enable);
389 }
390}
391
392#else
393
394static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
395{}
396
397#endif /* CONFIG_PPC_PMAC */
398
399static int check_root_hub_suspended(struct device *dev)
400{
401 struct usb_hcd *hcd = dev_get_drvdata(dev);
402
403 if (HCD_RH_RUNNING(hcd)) {
404 dev_warn(dev, "Root hub is not suspended\n");
405 return -EBUSY;
406 }
407 if (hcd->shared_hcd) {
408 hcd = hcd->shared_hcd;
409 if (HCD_RH_RUNNING(hcd)) {
410 dev_warn(dev, "Secondary root hub is not suspended\n");
411 return -EBUSY;
412 }
413 }
414 return 0;
415}
416
417static int suspend_common(struct device *dev, pm_message_t msg)
418{
419 struct pci_dev *pci_dev = to_pci_dev(dev);
420 struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
421 bool do_wakeup;
422 int retval;
423
424 do_wakeup = PMSG_IS_AUTO(msg) ? true : device_may_wakeup(dev);
425
426 /* Root hub suspend should have stopped all downstream traffic,
427 * and all bus master traffic. And done so for both the interface
428 * and the stub usb_device (which we check here). But maybe it
429 * didn't; writing sysfs power/state files ignores such rules...
430 */
431 retval = check_root_hub_suspended(dev);
432 if (retval)
433 return retval;
434
435 if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) {
436 /* Optimization: Don't suspend if a root-hub wakeup is
437 * pending and it would cause the HCD to wake up anyway.
438 */
439 if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
440 return -EBUSY;
441 if (do_wakeup && hcd->shared_hcd &&
442 HCD_WAKEUP_PENDING(hcd->shared_hcd))
443 return -EBUSY;
444 retval = hcd->driver->pci_suspend(hcd, do_wakeup);
445 suspend_report_result(dev, hcd->driver->pci_suspend, retval);
446
447 /* Check again in case wakeup raced with pci_suspend */
448 if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) ||
449 (retval == 0 && do_wakeup && hcd->shared_hcd &&
450 HCD_WAKEUP_PENDING(hcd->shared_hcd))) {
451 if (hcd->driver->pci_resume)
452 hcd->driver->pci_resume(hcd, msg);
453 retval = -EBUSY;
454 }
455 if (retval)
456 return retval;
457 }
458
459 /* If MSI-X is enabled, the driver will have synchronized all vectors
460 * in pci_suspend(). If MSI or legacy PCI is enabled, that will be
461 * synchronized here.
462 */
463 if (!hcd->msix_enabled)
464 synchronize_irq(pci_irq_vector(pci_dev, 0));
465
466 /* Downstream ports from this root hub should already be quiesced, so
467 * there will be no DMA activity. Now we can shut down the upstream
468 * link (except maybe for PME# resume signaling). We'll enter a
469 * low power state during suspend_noirq, if the hardware allows.
470 */
471 pci_disable_device(pci_dev);
472 return retval;
473}
474
475static int resume_common(struct device *dev, pm_message_t msg)
476{
477 struct pci_dev *pci_dev = to_pci_dev(dev);
478 struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
479 int retval;
480
481 if (HCD_RH_RUNNING(hcd) ||
482 (hcd->shared_hcd &&
483 HCD_RH_RUNNING(hcd->shared_hcd))) {
484 dev_dbg(dev, "can't resume, not suspended!\n");
485 return 0;
486 }
487
488 retval = pci_enable_device(pci_dev);
489 if (retval < 0) {
490 dev_err(dev, "can't re-enable after resume, %d!\n", retval);
491 return retval;
492 }
493
494 pci_set_master(pci_dev);
495
496 if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) {
497
498 /*
499 * Only EHCI controllers have to wait for their companions.
500 * No locking is needed because PCI controller drivers do not
501 * get unbound during system resume.
502 */
503 if (pci_dev->class == CL_EHCI && msg.event != PM_EVENT_AUTO_RESUME)
504 for_each_companion(pci_dev, hcd,
505 ehci_wait_for_companions);
506
507 retval = hcd->driver->pci_resume(hcd, msg);
508 if (retval) {
509 dev_err(dev, "PCI post-resume error %d!\n", retval);
510 usb_hc_died(hcd);
511 }
512 }
513 return retval;
514}
515
516#ifdef CONFIG_PM_SLEEP
517
518static int hcd_pci_suspend(struct device *dev)
519{
520 return suspend_common(dev, PMSG_SUSPEND);
521}
522
523static int hcd_pci_suspend_noirq(struct device *dev)
524{
525 struct pci_dev *pci_dev = to_pci_dev(dev);
526 struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
527 int retval;
528
529 retval = check_root_hub_suspended(dev);
530 if (retval)
531 return retval;
532
533 pci_save_state(pci_dev);
534
535 /* If the root hub is dead rather than suspended, disallow remote
536 * wakeup. usb_hc_died() should ensure that both hosts are marked as
537 * dying, so we only need to check the primary roothub.
538 */
539 if (HCD_DEAD(hcd))
540 device_set_wakeup_enable(dev, 0);
541 dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
542
543 /* Possibly enable remote wakeup,
544 * choose the appropriate low-power state, and go to that state.
545 */
546 retval = pci_prepare_to_sleep(pci_dev);
547 if (retval == -EIO) { /* Low-power not supported */
548 dev_dbg(dev, "--> PCI D0 legacy\n");
549 retval = 0;
550 } else if (retval == 0) {
551 dev_dbg(dev, "--> PCI %s\n",
552 pci_power_name(pci_dev->current_state));
553 } else {
554 suspend_report_result(dev, pci_prepare_to_sleep, retval);
555 return retval;
556 }
557
558 powermac_set_asic(pci_dev, 0);
559 return retval;
560}
561
562static int hcd_pci_poweroff_late(struct device *dev)
563{
564 struct pci_dev *pci_dev = to_pci_dev(dev);
565 struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
566
567 if (hcd->driver->pci_poweroff_late && !HCD_DEAD(hcd))
568 return hcd->driver->pci_poweroff_late(hcd, device_may_wakeup(dev));
569
570 return 0;
571}
572
573static int hcd_pci_resume_noirq(struct device *dev)
574{
575 powermac_set_asic(to_pci_dev(dev), 1);
576 return 0;
577}
578
579static int hcd_pci_resume(struct device *dev)
580{
581 return resume_common(dev, PMSG_RESUME);
582}
583
584static int hcd_pci_restore(struct device *dev)
585{
586 return resume_common(dev, PMSG_RESTORE);
587}
588
589#else
590
591#define hcd_pci_suspend NULL
592#define hcd_pci_suspend_noirq NULL
593#define hcd_pci_poweroff_late NULL
594#define hcd_pci_resume_noirq NULL
595#define hcd_pci_resume NULL
596#define hcd_pci_restore NULL
597
598#endif /* CONFIG_PM_SLEEP */
599
600static int hcd_pci_runtime_suspend(struct device *dev)
601{
602 int retval;
603
604 retval = suspend_common(dev, PMSG_AUTO_SUSPEND);
605 if (retval == 0)
606 powermac_set_asic(to_pci_dev(dev), 0);
607 dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval);
608 return retval;
609}
610
611static int hcd_pci_runtime_resume(struct device *dev)
612{
613 int retval;
614
615 powermac_set_asic(to_pci_dev(dev), 1);
616 retval = resume_common(dev, PMSG_AUTO_RESUME);
617 dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval);
618 return retval;
619}
620
621const struct dev_pm_ops usb_hcd_pci_pm_ops = {
622 .suspend = hcd_pci_suspend,
623 .suspend_noirq = hcd_pci_suspend_noirq,
624 .resume_noirq = hcd_pci_resume_noirq,
625 .resume = hcd_pci_resume,
626 .freeze = hcd_pci_suspend,
627 .freeze_noirq = check_root_hub_suspended,
628 .thaw_noirq = NULL,
629 .thaw = hcd_pci_resume,
630 .poweroff = hcd_pci_suspend,
631 .poweroff_late = hcd_pci_poweroff_late,
632 .poweroff_noirq = hcd_pci_suspend_noirq,
633 .restore_noirq = hcd_pci_resume_noirq,
634 .restore = hcd_pci_restore,
635 .runtime_suspend = hcd_pci_runtime_suspend,
636 .runtime_resume = hcd_pci_runtime_resume,
637};
638EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
639
640#endif /* CONFIG_PM */
1/*
2 * (C) Copyright David Brownell 2000-2002
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 */
18
19#include <linux/kernel.h>
20#include <linux/module.h>
21#include <linux/pci.h>
22#include <linux/usb.h>
23#include <linux/usb/hcd.h>
24
25#include <asm/io.h>
26#include <asm/irq.h>
27
28#ifdef CONFIG_PPC_PMAC
29#include <asm/machdep.h>
30#include <asm/pmac_feature.h>
31#include <asm/prom.h>
32#endif
33
34#include "usb.h"
35
36
37/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
38
39/*
40 * Coordinate handoffs between EHCI and companion controllers
41 * during EHCI probing and system resume.
42 */
43
44static DECLARE_RWSEM(companions_rwsem);
45
46#define CL_UHCI PCI_CLASS_SERIAL_USB_UHCI
47#define CL_OHCI PCI_CLASS_SERIAL_USB_OHCI
48#define CL_EHCI PCI_CLASS_SERIAL_USB_EHCI
49
50static inline int is_ohci_or_uhci(struct pci_dev *pdev)
51{
52 return pdev->class == CL_OHCI || pdev->class == CL_UHCI;
53}
54
55typedef void (*companion_fn)(struct pci_dev *pdev, struct usb_hcd *hcd,
56 struct pci_dev *companion, struct usb_hcd *companion_hcd);
57
58/* Iterate over PCI devices in the same slot as pdev and call fn for each */
59static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd,
60 companion_fn fn)
61{
62 struct pci_dev *companion;
63 struct usb_hcd *companion_hcd;
64 unsigned int slot = PCI_SLOT(pdev->devfn);
65
66 /*
67 * Iterate through other PCI functions in the same slot.
68 * If the function's drvdata isn't set then it isn't bound to
69 * a USB host controller driver, so skip it.
70 */
71 companion = NULL;
72 for_each_pci_dev(companion) {
73 if (companion->bus != pdev->bus ||
74 PCI_SLOT(companion->devfn) != slot)
75 continue;
76
77 /*
78 * Companion device should be either UHCI,OHCI or EHCI host
79 * controller, otherwise skip.
80 */
81 if (companion->class != CL_UHCI && companion->class != CL_OHCI &&
82 companion->class != CL_EHCI)
83 continue;
84
85 companion_hcd = pci_get_drvdata(companion);
86 if (!companion_hcd || !companion_hcd->self.root_hub)
87 continue;
88 fn(pdev, hcd, companion, companion_hcd);
89 }
90}
91
92/*
93 * We're about to add an EHCI controller, which will unceremoniously grab
94 * all the port connections away from its companions. To prevent annoying
95 * error messages, lock the companion's root hub and gracefully unconfigure
96 * it beforehand. Leave it locked until the EHCI controller is all set.
97 */
98static void ehci_pre_add(struct pci_dev *pdev, struct usb_hcd *hcd,
99 struct pci_dev *companion, struct usb_hcd *companion_hcd)
100{
101 struct usb_device *udev;
102
103 if (is_ohci_or_uhci(companion)) {
104 udev = companion_hcd->self.root_hub;
105 usb_lock_device(udev);
106 usb_set_configuration(udev, 0);
107 }
108}
109
110/*
111 * Adding the EHCI controller has either succeeded or failed. Set the
112 * companion pointer accordingly, and in either case, reconfigure and
113 * unlock the root hub.
114 */
115static void ehci_post_add(struct pci_dev *pdev, struct usb_hcd *hcd,
116 struct pci_dev *companion, struct usb_hcd *companion_hcd)
117{
118 struct usb_device *udev;
119
120 if (is_ohci_or_uhci(companion)) {
121 if (dev_get_drvdata(&pdev->dev)) { /* Succeeded */
122 dev_dbg(&pdev->dev, "HS companion for %s\n",
123 dev_name(&companion->dev));
124 companion_hcd->self.hs_companion = &hcd->self;
125 }
126 udev = companion_hcd->self.root_hub;
127 usb_set_configuration(udev, 1);
128 usb_unlock_device(udev);
129 }
130}
131
132/*
133 * We just added a non-EHCI controller. Find the EHCI controller to
134 * which it is a companion, and store a pointer to the bus structure.
135 */
136static void non_ehci_add(struct pci_dev *pdev, struct usb_hcd *hcd,
137 struct pci_dev *companion, struct usb_hcd *companion_hcd)
138{
139 if (is_ohci_or_uhci(pdev) && companion->class == CL_EHCI) {
140 dev_dbg(&pdev->dev, "FS/LS companion for %s\n",
141 dev_name(&companion->dev));
142 hcd->self.hs_companion = &companion_hcd->self;
143 }
144}
145
146/* We are removing an EHCI controller. Clear the companions' pointers. */
147static void ehci_remove(struct pci_dev *pdev, struct usb_hcd *hcd,
148 struct pci_dev *companion, struct usb_hcd *companion_hcd)
149{
150 if (is_ohci_or_uhci(companion))
151 companion_hcd->self.hs_companion = NULL;
152}
153
154#ifdef CONFIG_PM
155
156/* An EHCI controller must wait for its companions before resuming. */
157static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd,
158 struct pci_dev *companion, struct usb_hcd *companion_hcd)
159{
160 if (is_ohci_or_uhci(companion))
161 device_pm_wait_for_dev(&pdev->dev, &companion->dev);
162}
163
164#endif /* CONFIG_PM */
165
166/*-------------------------------------------------------------------------*/
167
168/* configure so an HC device and id are always provided */
169/* always called with process context; sleeping is OK */
170
171/**
172 * usb_hcd_pci_probe - initialize PCI-based HCDs
173 * @dev: USB Host Controller being probed
174 * @id: pci hotplug id connecting controller to HCD framework
175 * Context: !in_interrupt()
176 *
177 * Allocates basic PCI resources for this USB host controller, and
178 * then invokes the start() method for the HCD associated with it
179 * through the hotplug entry's driver_data.
180 *
181 * Store this function in the HCD's struct pci_driver as probe().
182 *
183 * Return: 0 if successful.
184 */
185int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
186{
187 struct hc_driver *driver;
188 struct usb_hcd *hcd;
189 int retval;
190 int hcd_irq = 0;
191
192 if (usb_disabled())
193 return -ENODEV;
194
195 if (!id)
196 return -EINVAL;
197 driver = (struct hc_driver *)id->driver_data;
198 if (!driver)
199 return -EINVAL;
200
201 if (pci_enable_device(dev) < 0)
202 return -ENODEV;
203
204 /*
205 * The xHCI driver has its own irq management
206 * make sure irq setup is not touched for xhci in generic hcd code
207 */
208 if ((driver->flags & HCD_MASK) < HCD_USB3) {
209 if (!dev->irq) {
210 dev_err(&dev->dev,
211 "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
212 pci_name(dev));
213 retval = -ENODEV;
214 goto disable_pci;
215 }
216 hcd_irq = dev->irq;
217 }
218
219 hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
220 if (!hcd) {
221 retval = -ENOMEM;
222 goto disable_pci;
223 }
224
225 hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
226 driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
227
228 if (driver->flags & HCD_MEMORY) {
229 /* EHCI, OHCI */
230 hcd->rsrc_start = pci_resource_start(dev, 0);
231 hcd->rsrc_len = pci_resource_len(dev, 0);
232 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
233 driver->description)) {
234 dev_dbg(&dev->dev, "controller already in use\n");
235 retval = -EBUSY;
236 goto put_hcd;
237 }
238 hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
239 if (hcd->regs == NULL) {
240 dev_dbg(&dev->dev, "error mapping memory\n");
241 retval = -EFAULT;
242 goto release_mem_region;
243 }
244
245 } else {
246 /* UHCI */
247 int region;
248
249 for (region = 0; region < PCI_ROM_RESOURCE; region++) {
250 if (!(pci_resource_flags(dev, region) &
251 IORESOURCE_IO))
252 continue;
253
254 hcd->rsrc_start = pci_resource_start(dev, region);
255 hcd->rsrc_len = pci_resource_len(dev, region);
256 if (request_region(hcd->rsrc_start, hcd->rsrc_len,
257 driver->description))
258 break;
259 }
260 if (region == PCI_ROM_RESOURCE) {
261 dev_dbg(&dev->dev, "no i/o regions available\n");
262 retval = -EBUSY;
263 goto put_hcd;
264 }
265 }
266
267 pci_set_master(dev);
268
269 /* Note: dev_set_drvdata must be called while holding the rwsem */
270 if (dev->class == CL_EHCI) {
271 down_write(&companions_rwsem);
272 dev_set_drvdata(&dev->dev, hcd);
273 for_each_companion(dev, hcd, ehci_pre_add);
274 retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
275 if (retval != 0)
276 dev_set_drvdata(&dev->dev, NULL);
277 for_each_companion(dev, hcd, ehci_post_add);
278 up_write(&companions_rwsem);
279 } else {
280 down_read(&companions_rwsem);
281 dev_set_drvdata(&dev->dev, hcd);
282 retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
283 if (retval != 0)
284 dev_set_drvdata(&dev->dev, NULL);
285 else
286 for_each_companion(dev, hcd, non_ehci_add);
287 up_read(&companions_rwsem);
288 }
289
290 if (retval != 0)
291 goto unmap_registers;
292 device_wakeup_enable(hcd->self.controller);
293
294 if (pci_dev_run_wake(dev))
295 pm_runtime_put_noidle(&dev->dev);
296 return retval;
297
298unmap_registers:
299 if (driver->flags & HCD_MEMORY) {
300 iounmap(hcd->regs);
301release_mem_region:
302 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
303 } else
304 release_region(hcd->rsrc_start, hcd->rsrc_len);
305put_hcd:
306 usb_put_hcd(hcd);
307disable_pci:
308 pci_disable_device(dev);
309 dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
310 return retval;
311}
312EXPORT_SYMBOL_GPL(usb_hcd_pci_probe);
313
314
315/* may be called without controller electrically present */
316/* may be called with controller, bus, and devices active */
317
318/**
319 * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
320 * @dev: USB Host Controller being removed
321 * Context: !in_interrupt()
322 *
323 * Reverses the effect of usb_hcd_pci_probe(), first invoking
324 * the HCD's stop() method. It is always called from a thread
325 * context, normally "rmmod", "apmd", or something similar.
326 *
327 * Store this function in the HCD's struct pci_driver as remove().
328 */
329void usb_hcd_pci_remove(struct pci_dev *dev)
330{
331 struct usb_hcd *hcd;
332
333 hcd = pci_get_drvdata(dev);
334 if (!hcd)
335 return;
336
337 if (pci_dev_run_wake(dev))
338 pm_runtime_get_noresume(&dev->dev);
339
340 /* Fake an interrupt request in order to give the driver a chance
341 * to test whether the controller hardware has been removed (e.g.,
342 * cardbus physical eject).
343 */
344 local_irq_disable();
345 usb_hcd_irq(0, hcd);
346 local_irq_enable();
347
348 /* Note: dev_set_drvdata must be called while holding the rwsem */
349 if (dev->class == CL_EHCI) {
350 down_write(&companions_rwsem);
351 for_each_companion(dev, hcd, ehci_remove);
352 usb_remove_hcd(hcd);
353 dev_set_drvdata(&dev->dev, NULL);
354 up_write(&companions_rwsem);
355 } else {
356 /* Not EHCI; just clear the companion pointer */
357 down_read(&companions_rwsem);
358 hcd->self.hs_companion = NULL;
359 usb_remove_hcd(hcd);
360 dev_set_drvdata(&dev->dev, NULL);
361 up_read(&companions_rwsem);
362 }
363
364 if (hcd->driver->flags & HCD_MEMORY) {
365 iounmap(hcd->regs);
366 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
367 } else {
368 release_region(hcd->rsrc_start, hcd->rsrc_len);
369 }
370
371 usb_put_hcd(hcd);
372 pci_disable_device(dev);
373}
374EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
375
376/**
377 * usb_hcd_pci_shutdown - shutdown host controller
378 * @dev: USB Host Controller being shutdown
379 */
380void usb_hcd_pci_shutdown(struct pci_dev *dev)
381{
382 struct usb_hcd *hcd;
383
384 hcd = pci_get_drvdata(dev);
385 if (!hcd)
386 return;
387
388 if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
389 hcd->driver->shutdown) {
390 hcd->driver->shutdown(hcd);
391 if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
392 free_irq(hcd->irq, hcd);
393 pci_disable_device(dev);
394 }
395}
396EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
397
398#ifdef CONFIG_PM
399
400#ifdef CONFIG_PPC_PMAC
401static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
402{
403 /* Enanble or disable ASIC clocks for USB */
404 if (machine_is(powermac)) {
405 struct device_node *of_node;
406
407 of_node = pci_device_to_OF_node(pci_dev);
408 if (of_node)
409 pmac_call_feature(PMAC_FTR_USB_ENABLE,
410 of_node, 0, enable);
411 }
412}
413
414#else
415
416static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
417{}
418
419#endif /* CONFIG_PPC_PMAC */
420
421static int check_root_hub_suspended(struct device *dev)
422{
423 struct pci_dev *pci_dev = to_pci_dev(dev);
424 struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
425
426 if (HCD_RH_RUNNING(hcd)) {
427 dev_warn(dev, "Root hub is not suspended\n");
428 return -EBUSY;
429 }
430 if (hcd->shared_hcd) {
431 hcd = hcd->shared_hcd;
432 if (HCD_RH_RUNNING(hcd)) {
433 dev_warn(dev, "Secondary root hub is not suspended\n");
434 return -EBUSY;
435 }
436 }
437 return 0;
438}
439
440static int suspend_common(struct device *dev, bool do_wakeup)
441{
442 struct pci_dev *pci_dev = to_pci_dev(dev);
443 struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
444 int retval;
445
446 /* Root hub suspend should have stopped all downstream traffic,
447 * and all bus master traffic. And done so for both the interface
448 * and the stub usb_device (which we check here). But maybe it
449 * didn't; writing sysfs power/state files ignores such rules...
450 */
451 retval = check_root_hub_suspended(dev);
452 if (retval)
453 return retval;
454
455 if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) {
456 /* Optimization: Don't suspend if a root-hub wakeup is
457 * pending and it would cause the HCD to wake up anyway.
458 */
459 if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
460 return -EBUSY;
461 if (do_wakeup && hcd->shared_hcd &&
462 HCD_WAKEUP_PENDING(hcd->shared_hcd))
463 return -EBUSY;
464 retval = hcd->driver->pci_suspend(hcd, do_wakeup);
465 suspend_report_result(hcd->driver->pci_suspend, retval);
466
467 /* Check again in case wakeup raced with pci_suspend */
468 if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) ||
469 (retval == 0 && do_wakeup && hcd->shared_hcd &&
470 HCD_WAKEUP_PENDING(hcd->shared_hcd))) {
471 if (hcd->driver->pci_resume)
472 hcd->driver->pci_resume(hcd, false);
473 retval = -EBUSY;
474 }
475 if (retval)
476 return retval;
477 }
478
479 /* If MSI-X is enabled, the driver will have synchronized all vectors
480 * in pci_suspend(). If MSI or legacy PCI is enabled, that will be
481 * synchronized here.
482 */
483 if (!hcd->msix_enabled)
484 synchronize_irq(pci_dev->irq);
485
486 /* Downstream ports from this root hub should already be quiesced, so
487 * there will be no DMA activity. Now we can shut down the upstream
488 * link (except maybe for PME# resume signaling). We'll enter a
489 * low power state during suspend_noirq, if the hardware allows.
490 */
491 pci_disable_device(pci_dev);
492 return retval;
493}
494
495static int resume_common(struct device *dev, int event)
496{
497 struct pci_dev *pci_dev = to_pci_dev(dev);
498 struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
499 int retval;
500
501 if (HCD_RH_RUNNING(hcd) ||
502 (hcd->shared_hcd &&
503 HCD_RH_RUNNING(hcd->shared_hcd))) {
504 dev_dbg(dev, "can't resume, not suspended!\n");
505 return 0;
506 }
507
508 retval = pci_enable_device(pci_dev);
509 if (retval < 0) {
510 dev_err(dev, "can't re-enable after resume, %d!\n", retval);
511 return retval;
512 }
513
514 pci_set_master(pci_dev);
515
516 if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) {
517
518 /*
519 * Only EHCI controllers have to wait for their companions.
520 * No locking is needed because PCI controller drivers do not
521 * get unbound during system resume.
522 */
523 if (pci_dev->class == CL_EHCI && event != PM_EVENT_AUTO_RESUME)
524 for_each_companion(pci_dev, hcd,
525 ehci_wait_for_companions);
526
527 retval = hcd->driver->pci_resume(hcd,
528 event == PM_EVENT_RESTORE);
529 if (retval) {
530 dev_err(dev, "PCI post-resume error %d!\n", retval);
531 if (hcd->shared_hcd)
532 usb_hc_died(hcd->shared_hcd);
533 usb_hc_died(hcd);
534 }
535 }
536 return retval;
537}
538
539#ifdef CONFIG_PM_SLEEP
540
541static int hcd_pci_suspend(struct device *dev)
542{
543 return suspend_common(dev, device_may_wakeup(dev));
544}
545
546static int hcd_pci_suspend_noirq(struct device *dev)
547{
548 struct pci_dev *pci_dev = to_pci_dev(dev);
549 struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
550 int retval;
551
552 retval = check_root_hub_suspended(dev);
553 if (retval)
554 return retval;
555
556 pci_save_state(pci_dev);
557
558 /* If the root hub is dead rather than suspended, disallow remote
559 * wakeup. usb_hc_died() should ensure that both hosts are marked as
560 * dying, so we only need to check the primary roothub.
561 */
562 if (HCD_DEAD(hcd))
563 device_set_wakeup_enable(dev, 0);
564 dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
565
566 /* Possibly enable remote wakeup,
567 * choose the appropriate low-power state, and go to that state.
568 */
569 retval = pci_prepare_to_sleep(pci_dev);
570 if (retval == -EIO) { /* Low-power not supported */
571 dev_dbg(dev, "--> PCI D0 legacy\n");
572 retval = 0;
573 } else if (retval == 0) {
574 dev_dbg(dev, "--> PCI %s\n",
575 pci_power_name(pci_dev->current_state));
576 } else {
577 suspend_report_result(pci_prepare_to_sleep, retval);
578 return retval;
579 }
580
581 powermac_set_asic(pci_dev, 0);
582 return retval;
583}
584
585static int hcd_pci_resume_noirq(struct device *dev)
586{
587 struct pci_dev *pci_dev = to_pci_dev(dev);
588
589 powermac_set_asic(pci_dev, 1);
590
591 /* Go back to D0 and disable remote wakeup */
592 pci_back_from_sleep(pci_dev);
593 return 0;
594}
595
596static int hcd_pci_resume(struct device *dev)
597{
598 return resume_common(dev, PM_EVENT_RESUME);
599}
600
601static int hcd_pci_restore(struct device *dev)
602{
603 return resume_common(dev, PM_EVENT_RESTORE);
604}
605
606#else
607
608#define hcd_pci_suspend NULL
609#define hcd_pci_suspend_noirq NULL
610#define hcd_pci_resume_noirq NULL
611#define hcd_pci_resume NULL
612#define hcd_pci_restore NULL
613
614#endif /* CONFIG_PM_SLEEP */
615
616static int hcd_pci_runtime_suspend(struct device *dev)
617{
618 int retval;
619
620 retval = suspend_common(dev, true);
621 if (retval == 0)
622 powermac_set_asic(to_pci_dev(dev), 0);
623 dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval);
624 return retval;
625}
626
627static int hcd_pci_runtime_resume(struct device *dev)
628{
629 int retval;
630
631 powermac_set_asic(to_pci_dev(dev), 1);
632 retval = resume_common(dev, PM_EVENT_AUTO_RESUME);
633 dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval);
634 return retval;
635}
636
637const struct dev_pm_ops usb_hcd_pci_pm_ops = {
638 .suspend = hcd_pci_suspend,
639 .suspend_noirq = hcd_pci_suspend_noirq,
640 .resume_noirq = hcd_pci_resume_noirq,
641 .resume = hcd_pci_resume,
642 .freeze = check_root_hub_suspended,
643 .freeze_noirq = check_root_hub_suspended,
644 .thaw_noirq = NULL,
645 .thaw = NULL,
646 .poweroff = hcd_pci_suspend,
647 .poweroff_noirq = hcd_pci_suspend_noirq,
648 .restore_noirq = hcd_pci_resume_noirq,
649 .restore = hcd_pci_restore,
650 .runtime_suspend = hcd_pci_runtime_suspend,
651 .runtime_resume = hcd_pci_runtime_resume,
652};
653EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
654
655#endif /* CONFIG_PM */