1// SPDX-License-Identifier: GPL-2.0+
   2/*****************************************************************************/
   3/*
   4 *           moxa.c  -- MOXA Intellio family multiport serial driver.
   5 *
   6 *      Copyright (C) 1999-2000  Moxa Technologies (support@moxa.com).
   7 *      Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
   8 *
   9 *      This code is loosely based on the Linux serial driver, written by
  10 *      Linus Torvalds, Theodore T'so and others.
 
 
 
 
 
  11 */
  12
  13/*
  14 *    MOXA Intellio Series Driver
  15 *      for             : LINUX
  16 *      date            : 1999/1/7
  17 *      version         : 5.1
  18 */
  19
  20#include <linux/module.h>
  21#include <linux/types.h>
  22#include <linux/mm.h>
  23#include <linux/ioport.h>
  24#include <linux/errno.h>
  25#include <linux/firmware.h>
  26#include <linux/signal.h>
  27#include <linux/sched.h>
  28#include <linux/timer.h>
  29#include <linux/interrupt.h>
  30#include <linux/tty.h>
  31#include <linux/tty_flip.h>
  32#include <linux/major.h>
  33#include <linux/string.h>
  34#include <linux/fcntl.h>
  35#include <linux/ptrace.h>
  36#include <linux/serial.h>
  37#include <linux/tty_driver.h>
  38#include <linux/delay.h>
  39#include <linux/pci.h>
  40#include <linux/init.h>
  41#include <linux/bitops.h>
  42#include <linux/slab.h>
  43#include <linux/ratelimit.h>
  44
  45#include <asm/io.h>
  46#include <linux/uaccess.h>
  47
  48#define	MOXA			0x400
  49#define MOXA_GET_IQUEUE		(MOXA + 1)	/* get input buffered count */
  50#define MOXA_GET_OQUEUE		(MOXA + 2)	/* get output buffered count */
  51#define MOXA_GETDATACOUNT       (MOXA + 23)
  52#define MOXA_GET_IOQUEUE	(MOXA + 27)
  53#define MOXA_FLUSH_QUEUE	(MOXA + 28)
  54#define MOXA_GETMSTATUS         (MOXA + 65)
  55
  56/*
  57 *    System Configuration
  58 */
  59
  60#define Magic_code	0x404
  61
  62/*
  63 *    for C218 BIOS initialization
  64 */
  65#define C218_ConfBase	0x800
  66#define C218_status	(C218_ConfBase + 0)	/* BIOS running status    */
  67#define C218_diag	(C218_ConfBase + 2)	/* diagnostic status      */
  68#define C218_key	(C218_ConfBase + 4)	/* WORD (0x218 for C218) */
  69#define C218DLoad_len	(C218_ConfBase + 6)	/* WORD           */
  70#define C218check_sum	(C218_ConfBase + 8)	/* BYTE           */
  71#define C218chksum_ok	(C218_ConfBase + 0x0a)	/* BYTE (1:ok)            */
  72#define C218_TestRx	(C218_ConfBase + 0x10)	/* 8 bytes for 8 ports    */
  73#define C218_TestTx	(C218_ConfBase + 0x18)	/* 8 bytes for 8 ports    */
  74#define C218_RXerr	(C218_ConfBase + 0x20)	/* 8 bytes for 8 ports    */
  75#define C218_ErrFlag	(C218_ConfBase + 0x28)	/* 8 bytes for 8 ports    */
  76
  77#define C218_LoadBuf	0x0F00
  78#define C218_KeyCode	0x218
  79#define CP204J_KeyCode	0x204
  80
  81/*
  82 *    for C320 BIOS initialization
  83 */
  84#define C320_ConfBase	0x800
  85#define C320_LoadBuf	0x0f00
  86#define STS_init	0x05	/* for C320_status        */
  87
  88#define C320_status	C320_ConfBase + 0	/* BIOS running status    */
  89#define C320_diag	C320_ConfBase + 2	/* diagnostic status      */
  90#define C320_key	C320_ConfBase + 4	/* WORD (0320H for C320) */
  91#define C320DLoad_len	C320_ConfBase + 6	/* WORD           */
  92#define C320check_sum	C320_ConfBase + 8	/* WORD           */
  93#define C320chksum_ok	C320_ConfBase + 0x0a	/* WORD (1:ok)            */
  94#define C320bapi_len	C320_ConfBase + 0x0c	/* WORD           */
  95#define C320UART_no	C320_ConfBase + 0x0e	/* WORD           */
  96
  97#define C320_KeyCode	0x320
  98
  99#define FixPage_addr	0x0000	/* starting addr of static page  */
 100#define DynPage_addr	0x2000	/* starting addr of dynamic page */
 101#define C218_start	0x3000	/* starting addr of C218 BIOS prg */
 102#define Control_reg	0x1ff0	/* select page and reset control */
 103#define HW_reset	0x80
 104
 105/*
 106 *    Function Codes
 107 */
 108#define FC_CardReset	0x80
 109#define FC_ChannelReset 1	/* C320 firmware not supported */
 110#define FC_EnableCH	2
 111#define FC_DisableCH	3
 112#define FC_SetParam	4
 113#define FC_SetMode	5
 114#define FC_SetRate	6
 115#define FC_LineControl	7
 116#define FC_LineStatus	8
 117#define FC_XmitControl	9
 118#define FC_FlushQueue	10
 119#define FC_SendBreak	11
 120#define FC_StopBreak	12
 121#define FC_LoopbackON	13
 122#define FC_LoopbackOFF	14
 123#define FC_ClrIrqTable	15
 124#define FC_SendXon	16
 125#define FC_SetTermIrq	17	/* C320 firmware not supported */
 126#define FC_SetCntIrq	18	/* C320 firmware not supported */
 127#define FC_SetBreakIrq	19
 128#define FC_SetLineIrq	20
 129#define FC_SetFlowCtl	21
 130#define FC_GenIrq	22
 131#define FC_InCD180	23
 132#define FC_OutCD180	24
 133#define FC_InUARTreg	23
 134#define FC_OutUARTreg	24
 135#define FC_SetXonXoff	25
 136#define FC_OutCD180CCR	26
 137#define FC_ExtIQueue	27
 138#define FC_ExtOQueue	28
 139#define FC_ClrLineIrq	29
 140#define FC_HWFlowCtl	30
 141#define FC_GetClockRate 35
 142#define FC_SetBaud	36
 143#define FC_SetDataMode  41
 144#define FC_GetCCSR      43
 145#define FC_GetDataError 45
 146#define FC_RxControl	50
 147#define FC_ImmSend	51
 148#define FC_SetXonState	52
 149#define FC_SetXoffState	53
 150#define FC_SetRxFIFOTrig 54
 151#define FC_SetTxFIFOCnt 55
 152#define FC_UnixRate	56
 153#define FC_UnixResetTimer 57
 154
 155#define	RxFIFOTrig1	0
 156#define	RxFIFOTrig4	1
 157#define	RxFIFOTrig8	2
 158#define	RxFIFOTrig14	3
 159
 160/*
 161 *    Dual-Ported RAM
 162 */
 163#define DRAM_global	0
 164#define INT_data	(DRAM_global + 0)
 165#define Config_base	(DRAM_global + 0x108)
 166
 167#define IRQindex	(INT_data + 0)
 168#define IRQpending	(INT_data + 4)
 169#define IRQtable	(INT_data + 8)
 170
 171/*
 172 *    Interrupt Status
 173 */
 174#define IntrRx		0x01	/* receiver data O.K.             */
 175#define IntrTx		0x02	/* transmit buffer empty  */
 176#define IntrFunc	0x04	/* function complete              */
 177#define IntrBreak	0x08	/* received break         */
 178#define IntrLine	0x10	/* line status change
 179				   for transmitter                */
 180#define IntrIntr	0x20	/* received INTR code             */
 181#define IntrQuit	0x40	/* received QUIT code             */
 182#define IntrEOF		0x80	/* received EOF code              */
 183
 184#define IntrRxTrigger	0x100	/* rx data count reach trigger value */
 185#define IntrTxTrigger	0x200	/* tx data count below trigger value */
 186
 187#define Magic_no	(Config_base + 0)
 188#define Card_model_no	(Config_base + 2)
 189#define Total_ports	(Config_base + 4)
 190#define Module_cnt	(Config_base + 8)
 191#define Module_no	(Config_base + 10)
 192#define Timer_10ms	(Config_base + 14)
 193#define Disable_IRQ	(Config_base + 20)
 194#define TMS320_PORT1	(Config_base + 22)
 195#define TMS320_PORT2	(Config_base + 24)
 196#define TMS320_CLOCK	(Config_base + 26)
 197
 198/*
 199 *    DATA BUFFER in DRAM
 200 */
 201#define Extern_table	0x400	/* Base address of the external table
 202				   (24 words *    64) total 3K bytes
 203				   (24 words * 128) total 6K bytes */
 204#define Extern_size	0x60	/* 96 bytes                       */
 205#define RXrptr		0x00	/* read pointer for RX buffer     */
 206#define RXwptr		0x02	/* write pointer for RX buffer    */
 207#define TXrptr		0x04	/* read pointer for TX buffer     */
 208#define TXwptr		0x06	/* write pointer for TX buffer    */
 209#define HostStat	0x08	/* IRQ flag and general flag      */
 210#define FlagStat	0x0A
 211#define FlowControl	0x0C	/* B7 B6 B5 B4 B3 B2 B1 B0              */
 212				/*  x  x  x  x  |  |  |  |            */
 213				/*              |  |  |  + CTS flow   */
 214				/*              |  |  +--- RTS flow   */
 215				/*              |  +------ TX Xon/Xoff */
 216				/*              +--------- RX Xon/Xoff */
 217#define Break_cnt	0x0E	/* received break count   */
 218#define CD180TXirq	0x10	/* if non-0: enable TX irq        */
 219#define RX_mask		0x12
 220#define TX_mask		0x14
 221#define Ofs_rxb		0x16
 222#define Ofs_txb		0x18
 223#define Page_rxb	0x1A
 224#define Page_txb	0x1C
 225#define EndPage_rxb	0x1E
 226#define EndPage_txb	0x20
 227#define Data_error	0x22
 228#define RxTrigger	0x28
 229#define TxTrigger	0x2a
 230
 231#define rRXwptr		0x34
 232#define Low_water	0x36
 233
 234#define FuncCode	0x40
 235#define FuncArg		0x42
 236#define FuncArg1	0x44
 237
 238#define C218rx_size	0x2000	/* 8K bytes */
 239#define C218tx_size	0x8000	/* 32K bytes */
 240
 241#define C218rx_mask	(C218rx_size - 1)
 242#define C218tx_mask	(C218tx_size - 1)
 243
 244#define C320p8rx_size	0x2000
 245#define C320p8tx_size	0x8000
 246#define C320p8rx_mask	(C320p8rx_size - 1)
 247#define C320p8tx_mask	(C320p8tx_size - 1)
 248
 249#define C320p16rx_size	0x2000
 250#define C320p16tx_size	0x4000
 251#define C320p16rx_mask	(C320p16rx_size - 1)
 252#define C320p16tx_mask	(C320p16tx_size - 1)
 253
 254#define C320p24rx_size	0x2000
 255#define C320p24tx_size	0x2000
 256#define C320p24rx_mask	(C320p24rx_size - 1)
 257#define C320p24tx_mask	(C320p24tx_size - 1)
 258
 259#define C320p32rx_size	0x1000
 260#define C320p32tx_size	0x1000
 261#define C320p32rx_mask	(C320p32rx_size - 1)
 262#define C320p32tx_mask	(C320p32tx_size - 1)
 263
 264#define Page_size	0x2000U
 265#define Page_mask	(Page_size - 1)
 266#define C218rx_spage	3
 267#define C218tx_spage	4
 268#define C218rx_pageno	1
 269#define C218tx_pageno	4
 270#define C218buf_pageno	5
 271
 272#define C320p8rx_spage	3
 273#define C320p8tx_spage	4
 274#define C320p8rx_pgno	1
 275#define C320p8tx_pgno	4
 276#define C320p8buf_pgno	5
 277
 278#define C320p16rx_spage 3
 279#define C320p16tx_spage 4
 280#define C320p16rx_pgno	1
 281#define C320p16tx_pgno	2
 282#define C320p16buf_pgno 3
 283
 284#define C320p24rx_spage 3
 285#define C320p24tx_spage 4
 286#define C320p24rx_pgno	1
 287#define C320p24tx_pgno	1
 288#define C320p24buf_pgno 2
 289
 290#define C320p32rx_spage 3
 291#define C320p32tx_ofs	C320p32rx_size
 292#define C320p32tx_spage 3
 293#define C320p32buf_pgno 1
 294
 295/*
 296 *    Host Status
 297 */
 298#define WakeupRx	0x01
 299#define WakeupTx	0x02
 300#define WakeupBreak	0x08
 301#define WakeupLine	0x10
 302#define WakeupIntr	0x20
 303#define WakeupQuit	0x40
 304#define WakeupEOF	0x80	/* used in VTIME control */
 305#define WakeupRxTrigger	0x100
 306#define WakeupTxTrigger	0x200
 307/*
 308 *    Flag status
 309 */
 310#define Rx_over		0x01
 311#define Xoff_state	0x02
 312#define Tx_flowOff	0x04
 313#define Tx_enable	0x08
 314#define CTS_state	0x10
 315#define DSR_state	0x20
 316#define DCD_state	0x80
 317/*
 318 *    FlowControl
 319 */
 320#define CTS_FlowCtl	1
 321#define RTS_FlowCtl	2
 322#define Tx_FlowCtl	4
 323#define Rx_FlowCtl	8
 324#define IXM_IXANY	0x10
 325
 326#define LowWater	128
 327
 328#define DTR_ON		1
 329#define RTS_ON		2
 330#define CTS_ON		1
 331#define DSR_ON		2
 332#define DCD_ON		8
 333
 334/* mode definition */
 335#define	MX_CS8		0x03
 336#define	MX_CS7		0x02
 337#define	MX_CS6		0x01
 338#define	MX_CS5		0x00
 339
 340#define	MX_STOP1	0x00
 341#define	MX_STOP15	0x04
 342#define	MX_STOP2	0x08
 343
 344#define	MX_PARNONE	0x00
 345#define	MX_PAREVEN	0x40
 346#define	MX_PARODD	0xC0
 347#define	MX_PARMARK	0xA0
 348#define	MX_PARSPACE	0x20
 349
 350#define MOXA_VERSION		"6.0k"
 351
 352#define MOXA_FW_HDRLEN		32
 353
 354#define MOXAMAJOR		172
 355
 356#define MAX_BOARDS		4	/* Don't change this value */
 357#define MAX_PORTS_PER_BOARD	32	/* Don't change this value */
 358#define MAX_PORTS		(MAX_BOARDS * MAX_PORTS_PER_BOARD)
 359
 360#define MOXA_IS_320(brd) ((brd)->boardType == MOXA_BOARD_C320_ISA || \
 361		(brd)->boardType == MOXA_BOARD_C320_PCI)
 362
 363/*
 364 *    Define the Moxa PCI vendor and device IDs.
 365 */
 366#define MOXA_BUS_TYPE_ISA	0
 367#define MOXA_BUS_TYPE_PCI	1
 368
 369enum {
 370	MOXA_BOARD_C218_PCI = 1,
 371	MOXA_BOARD_C218_ISA,
 372	MOXA_BOARD_C320_PCI,
 373	MOXA_BOARD_C320_ISA,
 374	MOXA_BOARD_CP204J,
 375};
 376
 377static char *moxa_brdname[] =
 378{
 379	"C218 Turbo PCI series",
 380	"C218 Turbo ISA series",
 381	"C320 Turbo PCI series",
 382	"C320 Turbo ISA series",
 383	"CP-204J series",
 384};
 385
 386#ifdef CONFIG_PCI
 387static const struct pci_device_id moxa_pcibrds[] = {
 388	{ PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218),
 389		.driver_data = MOXA_BOARD_C218_PCI },
 390	{ PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320),
 391		.driver_data = MOXA_BOARD_C320_PCI },
 392	{ PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J),
 393		.driver_data = MOXA_BOARD_CP204J },
 394	{ 0 }
 395};
 396MODULE_DEVICE_TABLE(pci, moxa_pcibrds);
 397#endif /* CONFIG_PCI */
 398
 399struct moxa_port;
 400
 401static struct moxa_board_conf {
 402	int boardType;
 403	int numPorts;
 404	int busType;
 405
 406	unsigned int ready;
 407
 408	struct moxa_port *ports;
 409
 410	void __iomem *basemem;
 411	void __iomem *intNdx;
 412	void __iomem *intPend;
 413	void __iomem *intTable;
 414} moxa_boards[MAX_BOARDS];
 415
 416struct mxser_mstatus {
 417	tcflag_t cflag;
 418	int cts;
 419	int dsr;
 420	int ri;
 421	int dcd;
 422};
 423
 424struct moxaq_str {
 425	int inq;
 426	int outq;
 427};
 428
 429struct moxa_port {
 430	struct tty_port port;
 431	struct moxa_board_conf *board;
 432	void __iomem *tableAddr;
 433
 434	int type;
 435	int cflag;
 436	unsigned long statusflags;
 437
 438	u8 DCDState;		/* Protected by the port lock */
 439	u8 lineCtrl;
 440	u8 lowChkFlag;
 441};
 442
 443struct mon_str {
 444	int tick;
 445	int rxcnt[MAX_PORTS];
 446	int txcnt[MAX_PORTS];
 447};
 448
 449/* statusflags */
 450#define TXSTOPPED	1
 451#define LOWWAIT 	2
 452#define EMPTYWAIT	3
 453
 454
 455#define WAKEUP_CHARS		256
 456
 457static int ttymajor = MOXAMAJOR;
 458static struct mon_str moxaLog;
 459static unsigned int moxaFuncTout = HZ / 2;
 460static unsigned int moxaLowWaterChk;
 461static DEFINE_MUTEX(moxa_openlock);
 462static DEFINE_SPINLOCK(moxa_lock);
 463
 464static unsigned long baseaddr[MAX_BOARDS];
 465static unsigned int type[MAX_BOARDS];
 466static unsigned int numports[MAX_BOARDS];
 467static struct tty_port moxa_service_port;
 468
 469MODULE_AUTHOR("William Chen");
 470MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
 471MODULE_LICENSE("GPL");
 472MODULE_FIRMWARE("c218tunx.cod");
 473MODULE_FIRMWARE("cp204unx.cod");
 474MODULE_FIRMWARE("c320tunx.cod");
 475
 476module_param_array(type, uint, NULL, 0);
 477MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
 478module_param_hw_array(baseaddr, ulong, ioport, NULL, 0);
 479MODULE_PARM_DESC(baseaddr, "base address");
 480module_param_array(numports, uint, NULL, 0);
 481MODULE_PARM_DESC(numports, "numports (ignored for C218)");
 482
 483module_param(ttymajor, int, 0);
 484
 485/*
 486 * static functions:
 487 */
 488static int moxa_open(struct tty_struct *, struct file *);
 489static void moxa_close(struct tty_struct *, struct file *);
 490static ssize_t moxa_write(struct tty_struct *, const u8 *, size_t);
 491static unsigned int moxa_write_room(struct tty_struct *);
 492static void moxa_flush_buffer(struct tty_struct *);
 493static unsigned int moxa_chars_in_buffer(struct tty_struct *);
 494static void moxa_set_termios(struct tty_struct *, const struct ktermios *);
 495static void moxa_stop(struct tty_struct *);
 496static void moxa_start(struct tty_struct *);
 497static void moxa_hangup(struct tty_struct *);
 498static int moxa_tiocmget(struct tty_struct *tty);
 499static int moxa_tiocmset(struct tty_struct *tty,
 500			 unsigned int set, unsigned int clear);
 501static void moxa_poll(struct timer_list *);
 502static void moxa_set_tty_param(struct tty_struct *, const struct ktermios *);
 503static void moxa_shutdown(struct tty_port *);
 504static bool moxa_carrier_raised(struct tty_port *);
 505static void moxa_dtr_rts(struct tty_port *, bool);
 506/*
 507 * moxa board interface functions:
 508 */
 509static void MoxaPortEnable(struct moxa_port *);
 510static void MoxaPortDisable(struct moxa_port *);
 511static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t);
 512static int MoxaPortGetLineOut(struct moxa_port *, bool *, bool *);
 513static void MoxaPortLineCtrl(struct moxa_port *, bool, bool);
 514static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
 515static int MoxaPortLineStatus(struct moxa_port *);
 516static void MoxaPortFlushData(struct moxa_port *, int);
 517static ssize_t MoxaPortWriteData(struct tty_struct *, const u8 *, size_t);
 518static int MoxaPortReadData(struct moxa_port *);
 519static unsigned int MoxaPortTxQueue(struct moxa_port *);
 520static int MoxaPortRxQueue(struct moxa_port *);
 521static unsigned int MoxaPortTxFree(struct moxa_port *);
 522static void MoxaPortTxDisable(struct moxa_port *);
 523static void MoxaPortTxEnable(struct moxa_port *);
 524static int moxa_get_serial_info(struct tty_struct *, struct serial_struct *);
 525static int moxa_set_serial_info(struct tty_struct *, struct serial_struct *);
 526static void MoxaSetFifo(struct moxa_port *port, int enable);
 527
 528/*
 529 * I/O functions
 530 */
 531
 532static DEFINE_SPINLOCK(moxafunc_lock);
 533
 534static void moxa_wait_finish(void __iomem *ofsAddr)
 535{
 536	unsigned long end = jiffies + moxaFuncTout;
 537
 538	while (readw(ofsAddr + FuncCode) != 0)
 539		if (time_after(jiffies, end))
 540			return;
 541	if (readw(ofsAddr + FuncCode) != 0)
 542		printk_ratelimited(KERN_WARNING "moxa function expired\n");
 543}
 544
 545static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg)
 546{
 547        unsigned long flags;
 548        spin_lock_irqsave(&moxafunc_lock, flags);
 549	writew(arg, ofsAddr + FuncArg);
 550	writew(cmd, ofsAddr + FuncCode);
 551	moxa_wait_finish(ofsAddr);
 552	spin_unlock_irqrestore(&moxafunc_lock, flags);
 553}
 554
 555static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg)
 556{
 557        unsigned long flags;
 558        u16 ret;
 559        spin_lock_irqsave(&moxafunc_lock, flags);
 560	writew(arg, ofsAddr + FuncArg);
 561	writew(cmd, ofsAddr + FuncCode);
 562	moxa_wait_finish(ofsAddr);
 563	ret = readw(ofsAddr + FuncArg);
 564	spin_unlock_irqrestore(&moxafunc_lock, flags);
 565	return ret;
 566}
 567
 568static void moxa_low_water_check(void __iomem *ofsAddr)
 569{
 570	u16 rptr, wptr, mask, len;
 571
 572	if (readb(ofsAddr + FlagStat) & Xoff_state) {
 573		rptr = readw(ofsAddr + RXrptr);
 574		wptr = readw(ofsAddr + RXwptr);
 575		mask = readw(ofsAddr + RX_mask);
 576		len = (wptr - rptr) & mask;
 577		if (len <= Low_water)
 578			moxafunc(ofsAddr, FC_SendXon, 0);
 579	}
 580}
 581
 582/*
 583 * TTY operations
 584 */
 585
 586static int moxa_ioctl(struct tty_struct *tty,
 587		      unsigned int cmd, unsigned long arg)
 588{
 589	struct moxa_port *ch = tty->driver_data;
 590	void __user *argp = (void __user *)arg;
 591	int status, ret = 0;
 592
 593	if (tty->index == MAX_PORTS) {
 594		if (cmd != MOXA_GETDATACOUNT && cmd != MOXA_GET_IOQUEUE &&
 595				cmd != MOXA_GETMSTATUS)
 596			return -EINVAL;
 597	} else if (!ch)
 598		return -ENODEV;
 599
 600	switch (cmd) {
 601	case MOXA_GETDATACOUNT:
 602		moxaLog.tick = jiffies;
 603		if (copy_to_user(argp, &moxaLog, sizeof(moxaLog)))
 604			ret = -EFAULT;
 605		break;
 606	case MOXA_FLUSH_QUEUE:
 607		MoxaPortFlushData(ch, arg);
 608		break;
 609	case MOXA_GET_IOQUEUE: {
 610		struct moxaq_str __user *argm = argp;
 611		struct moxaq_str tmp;
 612		struct moxa_port *p;
 613		unsigned int i, j;
 614
 615		for (i = 0; i < MAX_BOARDS; i++) {
 616			p = moxa_boards[i].ports;
 617			for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
 618				memset(&tmp, 0, sizeof(tmp));
 619				spin_lock_bh(&moxa_lock);
 620				if (moxa_boards[i].ready) {
 621					tmp.inq = MoxaPortRxQueue(p);
 622					tmp.outq = MoxaPortTxQueue(p);
 623				}
 624				spin_unlock_bh(&moxa_lock);
 625				if (copy_to_user(argm, &tmp, sizeof(tmp)))
 626					return -EFAULT;
 627			}
 628		}
 629		break;
 630	} case MOXA_GET_OQUEUE:
 631		status = MoxaPortTxQueue(ch);
 632		ret = put_user(status, (unsigned long __user *)argp);
 633		break;
 634	case MOXA_GET_IQUEUE:
 635		status = MoxaPortRxQueue(ch);
 636		ret = put_user(status, (unsigned long __user *)argp);
 637		break;
 638	case MOXA_GETMSTATUS: {
 639		struct mxser_mstatus __user *argm = argp;
 640		struct mxser_mstatus tmp;
 641		struct moxa_port *p;
 642		unsigned int i, j;
 643
 644		for (i = 0; i < MAX_BOARDS; i++) {
 645			p = moxa_boards[i].ports;
 646			for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
 647				struct tty_struct *ttyp;
 648				memset(&tmp, 0, sizeof(tmp));
 649				spin_lock_bh(&moxa_lock);
 650				if (!moxa_boards[i].ready) {
 651				        spin_unlock_bh(&moxa_lock);
 652					goto copy;
 653                                }
 654
 655				status = MoxaPortLineStatus(p);
 656				spin_unlock_bh(&moxa_lock);
 657
 658				if (status & 1)
 659					tmp.cts = 1;
 660				if (status & 2)
 661					tmp.dsr = 1;
 662				if (status & 4)
 663					tmp.dcd = 1;
 664
 665				ttyp = tty_port_tty_get(&p->port);
 666				if (!ttyp)
 667					tmp.cflag = p->cflag;
 668				else
 669					tmp.cflag = ttyp->termios.c_cflag;
 670				tty_kref_put(ttyp);
 671copy:
 672				if (copy_to_user(argm, &tmp, sizeof(tmp)))
 673					return -EFAULT;
 674			}
 675		}
 676		break;
 677	}
 
 
 
 
 
 
 
 
 
 
 678	default:
 679		ret = -ENOIOCTLCMD;
 680	}
 681	return ret;
 682}
 683
 684static int moxa_break_ctl(struct tty_struct *tty, int state)
 685{
 686	struct moxa_port *port = tty->driver_data;
 687
 688	moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak,
 689			Magic_code);
 690	return 0;
 691}
 692
 693static const struct tty_operations moxa_ops = {
 694	.open = moxa_open,
 695	.close = moxa_close,
 696	.write = moxa_write,
 697	.write_room = moxa_write_room,
 698	.flush_buffer = moxa_flush_buffer,
 699	.chars_in_buffer = moxa_chars_in_buffer,
 700	.ioctl = moxa_ioctl,
 701	.set_termios = moxa_set_termios,
 702	.stop = moxa_stop,
 703	.start = moxa_start,
 704	.hangup = moxa_hangup,
 705	.break_ctl = moxa_break_ctl,
 706	.tiocmget = moxa_tiocmget,
 707	.tiocmset = moxa_tiocmset,
 708	.set_serial = moxa_set_serial_info,
 709	.get_serial = moxa_get_serial_info,
 710};
 711
 712static const struct tty_port_operations moxa_port_ops = {
 713	.carrier_raised = moxa_carrier_raised,
 714	.dtr_rts = moxa_dtr_rts,
 715	.shutdown = moxa_shutdown,
 716};
 717
 718static struct tty_driver *moxaDriver;
 719static DEFINE_TIMER(moxaTimer, moxa_poll);
 720
 721/*
 722 * HW init
 723 */
 724
 725static int moxa_check_fw_model(struct moxa_board_conf *brd, u8 model)
 726{
 727	switch (brd->boardType) {
 728	case MOXA_BOARD_C218_ISA:
 729	case MOXA_BOARD_C218_PCI:
 730		if (model != 1)
 731			goto err;
 732		break;
 733	case MOXA_BOARD_CP204J:
 734		if (model != 3)
 735			goto err;
 736		break;
 737	default:
 738		if (model != 2)
 739			goto err;
 740		break;
 741	}
 742	return 0;
 743err:
 744	return -EINVAL;
 745}
 746
 747static int moxa_check_fw(const void *ptr)
 748{
 749	const __le16 *lptr = ptr;
 750
 751	if (*lptr != cpu_to_le16(0x7980))
 752		return -EINVAL;
 753
 754	return 0;
 755}
 756
 757static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf,
 758		size_t len)
 759{
 760	void __iomem *baseAddr = brd->basemem;
 761	u16 tmp;
 762
 763	writeb(HW_reset, baseAddr + Control_reg);	/* reset */
 764	msleep(10);
 765	memset_io(baseAddr, 0, 4096);
 766	memcpy_toio(baseAddr, buf, len);	/* download BIOS */
 767	writeb(0, baseAddr + Control_reg);	/* restart */
 768
 769	msleep(2000);
 770
 771	switch (brd->boardType) {
 772	case MOXA_BOARD_C218_ISA:
 773	case MOXA_BOARD_C218_PCI:
 774		tmp = readw(baseAddr + C218_key);
 775		if (tmp != C218_KeyCode)
 776			goto err;
 777		break;
 778	case MOXA_BOARD_CP204J:
 779		tmp = readw(baseAddr + C218_key);
 780		if (tmp != CP204J_KeyCode)
 781			goto err;
 782		break;
 783	default:
 784		tmp = readw(baseAddr + C320_key);
 785		if (tmp != C320_KeyCode)
 786			goto err;
 787		tmp = readw(baseAddr + C320_status);
 788		if (tmp != STS_init) {
 789			printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic "
 790					"module not found\n");
 791			return -EIO;
 792		}
 793		break;
 794	}
 795
 796	return 0;
 797err:
 798	printk(KERN_ERR "MOXA: bios upload failed -- board not found\n");
 799	return -EIO;
 800}
 801
 802static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr,
 803		size_t len)
 804{
 805	void __iomem *baseAddr = brd->basemem;
 806
 807	if (len < 7168) {
 808		printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n");
 809		return -EINVAL;
 810	}
 811
 812	writew(len - 7168 - 2, baseAddr + C320bapi_len);
 813	writeb(1, baseAddr + Control_reg);	/* Select Page 1 */
 814	memcpy_toio(baseAddr + DynPage_addr, ptr, 7168);
 815	writeb(2, baseAddr + Control_reg);	/* Select Page 2 */
 816	memcpy_toio(baseAddr + DynPage_addr, ptr + 7168, len - 7168);
 817
 818	return 0;
 819}
 820
 821static int moxa_real_load_code(struct moxa_board_conf *brd, const void *ptr,
 822		size_t len)
 823{
 824	void __iomem *baseAddr = brd->basemem;
 825	const __le16 *uptr = ptr;
 826	size_t wlen, len2, j;
 827	unsigned long key, loadbuf, loadlen, checksum, checksum_ok;
 828	unsigned int i, retry;
 829	u16 usum, keycode;
 830
 831	keycode = (brd->boardType == MOXA_BOARD_CP204J) ? CP204J_KeyCode :
 832				C218_KeyCode;
 833
 834	switch (brd->boardType) {
 835	case MOXA_BOARD_CP204J:
 836	case MOXA_BOARD_C218_ISA:
 837	case MOXA_BOARD_C218_PCI:
 838		key = C218_key;
 839		loadbuf = C218_LoadBuf;
 840		loadlen = C218DLoad_len;
 841		checksum = C218check_sum;
 842		checksum_ok = C218chksum_ok;
 843		break;
 844	default:
 845		key = C320_key;
 846		keycode = C320_KeyCode;
 847		loadbuf = C320_LoadBuf;
 848		loadlen = C320DLoad_len;
 849		checksum = C320check_sum;
 850		checksum_ok = C320chksum_ok;
 851		break;
 852	}
 853
 854	usum = 0;
 855	wlen = len >> 1;
 856	for (i = 0; i < wlen; i++)
 857		usum += le16_to_cpu(uptr[i]);
 858	retry = 0;
 859	do {
 860		wlen = len >> 1;
 861		j = 0;
 862		while (wlen) {
 863			len2 = (wlen > 2048) ? 2048 : wlen;
 864			wlen -= len2;
 865			memcpy_toio(baseAddr + loadbuf, ptr + j, len2 << 1);
 866			j += len2 << 1;
 867
 868			writew(len2, baseAddr + loadlen);
 869			writew(0, baseAddr + key);
 870			for (i = 0; i < 100; i++) {
 871				if (readw(baseAddr + key) == keycode)
 872					break;
 873				msleep(10);
 874			}
 875			if (readw(baseAddr + key) != keycode)
 876				return -EIO;
 877		}
 878		writew(0, baseAddr + loadlen);
 879		writew(usum, baseAddr + checksum);
 880		writew(0, baseAddr + key);
 881		for (i = 0; i < 100; i++) {
 882			if (readw(baseAddr + key) == keycode)
 883				break;
 884			msleep(10);
 885		}
 886		retry++;
 887	} while ((readb(baseAddr + checksum_ok) != 1) && (retry < 3));
 888	if (readb(baseAddr + checksum_ok) != 1)
 889		return -EIO;
 890
 891	writew(0, baseAddr + key);
 892	for (i = 0; i < 600; i++) {
 893		if (readw(baseAddr + Magic_no) == Magic_code)
 894			break;
 895		msleep(10);
 896	}
 897	if (readw(baseAddr + Magic_no) != Magic_code)
 898		return -EIO;
 899
 900	if (MOXA_IS_320(brd)) {
 901		if (brd->busType == MOXA_BUS_TYPE_PCI) {	/* ASIC board */
 902			writew(0x3800, baseAddr + TMS320_PORT1);
 903			writew(0x3900, baseAddr + TMS320_PORT2);
 904			writew(28499, baseAddr + TMS320_CLOCK);
 905		} else {
 906			writew(0x3200, baseAddr + TMS320_PORT1);
 907			writew(0x3400, baseAddr + TMS320_PORT2);
 908			writew(19999, baseAddr + TMS320_CLOCK);
 909		}
 910	}
 911	writew(1, baseAddr + Disable_IRQ);
 912	writew(0, baseAddr + Magic_no);
 913	for (i = 0; i < 500; i++) {
 914		if (readw(baseAddr + Magic_no) == Magic_code)
 915			break;
 916		msleep(10);
 917	}
 918	if (readw(baseAddr + Magic_no) != Magic_code)
 919		return -EIO;
 920
 921	if (MOXA_IS_320(brd)) {
 922		j = readw(baseAddr + Module_cnt);
 923		if (j <= 0)
 924			return -EIO;
 925		brd->numPorts = j * 8;
 926		writew(j, baseAddr + Module_no);
 927		writew(0, baseAddr + Magic_no);
 928		for (i = 0; i < 600; i++) {
 929			if (readw(baseAddr + Magic_no) == Magic_code)
 930				break;
 931			msleep(10);
 932		}
 933		if (readw(baseAddr + Magic_no) != Magic_code)
 934			return -EIO;
 935	}
 936	brd->intNdx = baseAddr + IRQindex;
 937	brd->intPend = baseAddr + IRQpending;
 938	brd->intTable = baseAddr + IRQtable;
 939
 940	return 0;
 941}
 942
 943static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr,
 944		size_t len)
 945{
 946	void __iomem *ofsAddr, *baseAddr = brd->basemem;
 947	struct moxa_port *port;
 948	int retval, i;
 949
 950	if (len % 2) {
 951		printk(KERN_ERR "MOXA: bios length is not even\n");
 952		return -EINVAL;
 953	}
 954
 955	retval = moxa_real_load_code(brd, ptr, len); /* may change numPorts */
 956	if (retval)
 957		return retval;
 958
 959	switch (brd->boardType) {
 960	case MOXA_BOARD_C218_ISA:
 961	case MOXA_BOARD_C218_PCI:
 962	case MOXA_BOARD_CP204J:
 963		port = brd->ports;
 964		for (i = 0; i < brd->numPorts; i++, port++) {
 965			port->board = brd;
 966			port->DCDState = 0;
 967			port->tableAddr = baseAddr + Extern_table +
 968					Extern_size * i;
 969			ofsAddr = port->tableAddr;
 970			writew(C218rx_mask, ofsAddr + RX_mask);
 971			writew(C218tx_mask, ofsAddr + TX_mask);
 972			writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb);
 973			writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb);
 974
 975			writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb);
 976			writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb);
 977
 978		}
 979		break;
 980	default:
 981		port = brd->ports;
 982		for (i = 0; i < brd->numPorts; i++, port++) {
 983			port->board = brd;
 984			port->DCDState = 0;
 985			port->tableAddr = baseAddr + Extern_table +
 986					Extern_size * i;
 987			ofsAddr = port->tableAddr;
 988			switch (brd->numPorts) {
 989			case 8:
 990				writew(C320p8rx_mask, ofsAddr + RX_mask);
 991				writew(C320p8tx_mask, ofsAddr + TX_mask);
 992				writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb);
 993				writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb);
 994				writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb);
 995				writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb);
 996
 997				break;
 998			case 16:
 999				writew(C320p16rx_mask, ofsAddr + RX_mask);
1000				writew(C320p16tx_mask, ofsAddr + TX_mask);
1001				writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb);
1002				writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb);
1003				writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb);
1004				writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb);
1005				break;
1006
1007			case 24:
1008				writew(C320p24rx_mask, ofsAddr + RX_mask);
1009				writew(C320p24tx_mask, ofsAddr + TX_mask);
1010				writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb);
1011				writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb);
1012				writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb);
1013				writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
1014				break;
1015			case 32:
1016				writew(C320p32rx_mask, ofsAddr + RX_mask);
1017				writew(C320p32tx_mask, ofsAddr + TX_mask);
1018				writew(C320p32tx_ofs, ofsAddr + Ofs_txb);
1019				writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb);
1020				writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb);
1021				writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb);
1022				writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
1023				break;
1024			}
1025		}
1026		break;
1027	}
1028	return 0;
1029}
1030
1031static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw)
1032{
1033	const void *ptr = fw->data;
1034	char rsn[64];
1035	u16 lens[5];
1036	size_t len;
1037	unsigned int a, lenp, lencnt;
1038	int ret = -EINVAL;
1039	struct {
1040		__le32 magic;	/* 0x34303430 */
1041		u8 reserved1[2];
1042		u8 type;	/* UNIX = 3 */
1043		u8 model;	/* C218T=1, C320T=2, CP204=3 */
1044		u8 reserved2[8];
1045		__le16 len[5];
1046	} const *hdr = ptr;
1047
1048	BUILD_BUG_ON(ARRAY_SIZE(hdr->len) != ARRAY_SIZE(lens));
1049
1050	if (fw->size < MOXA_FW_HDRLEN) {
1051		strcpy(rsn, "too short (even header won't fit)");
1052		goto err;
1053	}
1054	if (hdr->magic != cpu_to_le32(0x30343034)) {
1055		sprintf(rsn, "bad magic: %.8x", le32_to_cpu(hdr->magic));
1056		goto err;
1057	}
1058	if (hdr->type != 3) {
1059		sprintf(rsn, "not for linux, type is %u", hdr->type);
1060		goto err;
1061	}
1062	if (moxa_check_fw_model(brd, hdr->model)) {
1063		sprintf(rsn, "not for this card, model is %u", hdr->model);
1064		goto err;
1065	}
1066
1067	len = MOXA_FW_HDRLEN;
1068	lencnt = hdr->model == 2 ? 5 : 3;
1069	for (a = 0; a < ARRAY_SIZE(lens); a++) {
1070		lens[a] = le16_to_cpu(hdr->len[a]);
1071		if (lens[a] && len + lens[a] <= fw->size &&
1072				moxa_check_fw(&fw->data[len]))
1073			printk(KERN_WARNING "MOXA firmware: unexpected input "
1074				"at offset %u, but going on\n", (u32)len);
1075		if (!lens[a] && a < lencnt) {
1076			sprintf(rsn, "too few entries in fw file");
1077			goto err;
1078		}
1079		len += lens[a];
1080	}
1081
1082	if (len != fw->size) {
1083		sprintf(rsn, "bad length: %u (should be %u)", (u32)fw->size,
1084				(u32)len);
1085		goto err;
1086	}
1087
1088	ptr += MOXA_FW_HDRLEN;
1089	lenp = 0; /* bios */
1090
1091	strcpy(rsn, "read above");
1092
1093	ret = moxa_load_bios(brd, ptr, lens[lenp]);
1094	if (ret)
1095		goto err;
1096
1097	/* we skip the tty section (lens[1]), since we don't need it */
1098	ptr += lens[lenp] + lens[lenp + 1];
1099	lenp += 2; /* comm */
1100
1101	if (hdr->model == 2) {
1102		ret = moxa_load_320b(brd, ptr, lens[lenp]);
1103		if (ret)
1104			goto err;
1105		/* skip another tty */
1106		ptr += lens[lenp] + lens[lenp + 1];
1107		lenp += 2;
1108	}
1109
1110	ret = moxa_load_code(brd, ptr, lens[lenp]);
1111	if (ret)
1112		goto err;
1113
1114	return 0;
1115err:
1116	printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn);
1117	return ret;
1118}
1119
1120static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
1121{
1122	const struct firmware *fw;
1123	const char *file;
1124	struct moxa_port *p;
1125	unsigned int i, first_idx;
1126	int ret;
1127
1128	brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports),
1129			GFP_KERNEL);
1130	if (brd->ports == NULL) {
1131		printk(KERN_ERR "cannot allocate memory for ports\n");
1132		ret = -ENOMEM;
1133		goto err;
1134	}
1135
1136	for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) {
1137		tty_port_init(&p->port);
1138		p->port.ops = &moxa_port_ops;
1139		p->type = PORT_16550A;
1140		p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
1141	}
1142
1143	switch (brd->boardType) {
1144	case MOXA_BOARD_C218_ISA:
1145	case MOXA_BOARD_C218_PCI:
1146		file = "c218tunx.cod";
1147		break;
1148	case MOXA_BOARD_CP204J:
1149		file = "cp204unx.cod";
1150		break;
1151	default:
1152		file = "c320tunx.cod";
1153		break;
1154	}
1155
1156	ret = request_firmware(&fw, file, dev);
1157	if (ret) {
1158		printk(KERN_ERR "MOXA: request_firmware failed. Make sure "
1159				"you've placed '%s' file into your firmware "
1160				"loader directory (e.g. /lib/firmware)\n",
1161				file);
1162		goto err_free;
1163	}
1164
1165	ret = moxa_load_fw(brd, fw);
1166
1167	release_firmware(fw);
1168
1169	if (ret)
1170		goto err_free;
1171
1172	spin_lock_bh(&moxa_lock);
1173	brd->ready = 1;
1174	if (!timer_pending(&moxaTimer))
1175		mod_timer(&moxaTimer, jiffies + HZ / 50);
1176	spin_unlock_bh(&moxa_lock);
1177
1178	first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
1179	for (i = 0; i < brd->numPorts; i++)
1180		tty_port_register_device(&brd->ports[i].port, moxaDriver,
1181				first_idx + i, dev);
1182
1183	return 0;
1184err_free:
1185	for (i = 0; i < MAX_PORTS_PER_BOARD; i++)
1186		tty_port_destroy(&brd->ports[i].port);
1187	kfree(brd->ports);
1188err:
1189	return ret;
1190}
1191
1192static void moxa_board_deinit(struct moxa_board_conf *brd)
1193{
1194	unsigned int a, opened, first_idx;
1195
1196	mutex_lock(&moxa_openlock);
1197	spin_lock_bh(&moxa_lock);
1198	brd->ready = 0;
1199	spin_unlock_bh(&moxa_lock);
1200
1201	/* pci hot-un-plug support */
1202	for (a = 0; a < brd->numPorts; a++)
1203		if (tty_port_initialized(&brd->ports[a].port))
1204			tty_port_tty_hangup(&brd->ports[a].port, false);
1205
1206	for (a = 0; a < MAX_PORTS_PER_BOARD; a++)
1207		tty_port_destroy(&brd->ports[a].port);
1208
1209	while (1) {
1210		opened = 0;
1211		for (a = 0; a < brd->numPorts; a++)
1212			if (tty_port_initialized(&brd->ports[a].port))
1213				opened++;
1214		mutex_unlock(&moxa_openlock);
1215		if (!opened)
1216			break;
1217		msleep(50);
1218		mutex_lock(&moxa_openlock);
1219	}
1220
1221	first_idx = (brd - moxa_boards) * MAX_PORTS_PER_BOARD;
1222	for (a = 0; a < brd->numPorts; a++)
1223		tty_unregister_device(moxaDriver, first_idx + a);
1224
1225	iounmap(brd->basemem);
1226	brd->basemem = NULL;
1227	kfree(brd->ports);
1228}
1229
1230#ifdef CONFIG_PCI
1231static int moxa_pci_probe(struct pci_dev *pdev,
1232		const struct pci_device_id *ent)
1233{
1234	struct moxa_board_conf *board;
1235	unsigned int i;
1236	int board_type = ent->driver_data;
1237	int retval;
1238
1239	retval = pci_enable_device(pdev);
1240	if (retval) {
1241		dev_err(&pdev->dev, "can't enable pci device\n");
1242		goto err;
1243	}
1244
1245	for (i = 0; i < MAX_BOARDS; i++)
1246		if (moxa_boards[i].basemem == NULL)
1247			break;
1248
1249	retval = -ENODEV;
1250	if (i >= MAX_BOARDS) {
1251		dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards "
1252				"found. Board is ignored.\n", MAX_BOARDS);
1253		goto err;
1254	}
1255
1256	board = &moxa_boards[i];
1257
1258	retval = pci_request_region(pdev, 2, "moxa-base");
1259	if (retval) {
1260		dev_err(&pdev->dev, "can't request pci region 2\n");
1261		goto err;
1262	}
1263
1264	board->basemem = ioremap(pci_resource_start(pdev, 2), 0x4000);
1265	if (board->basemem == NULL) {
1266		dev_err(&pdev->dev, "can't remap io space 2\n");
1267		retval = -ENOMEM;
1268		goto err_reg;
1269	}
1270
1271	board->boardType = board_type;
1272	switch (board_type) {
1273	case MOXA_BOARD_C218_ISA:
1274	case MOXA_BOARD_C218_PCI:
1275		board->numPorts = 8;
1276		break;
1277
1278	case MOXA_BOARD_CP204J:
1279		board->numPorts = 4;
1280		break;
1281	default:
1282		board->numPorts = 0;
1283		break;
1284	}
1285	board->busType = MOXA_BUS_TYPE_PCI;
1286
1287	retval = moxa_init_board(board, &pdev->dev);
1288	if (retval)
1289		goto err_base;
1290
1291	pci_set_drvdata(pdev, board);
1292
1293	dev_info(&pdev->dev, "board '%s' ready (%u ports, firmware loaded)\n",
1294			moxa_brdname[board_type - 1], board->numPorts);
1295
1296	return 0;
1297err_base:
1298	iounmap(board->basemem);
1299	board->basemem = NULL;
1300err_reg:
1301	pci_release_region(pdev, 2);
1302err:
1303	return retval;
1304}
1305
1306static void moxa_pci_remove(struct pci_dev *pdev)
1307{
1308	struct moxa_board_conf *brd = pci_get_drvdata(pdev);
1309
1310	moxa_board_deinit(brd);
1311
1312	pci_release_region(pdev, 2);
1313}
1314
1315static struct pci_driver moxa_pci_driver = {
1316	.name = "moxa",
1317	.id_table = moxa_pcibrds,
1318	.probe = moxa_pci_probe,
1319	.remove = moxa_pci_remove
1320};
1321#endif /* CONFIG_PCI */
1322
1323static int __init moxa_init(void)
1324{
1325	unsigned int isabrds = 0;
1326	int retval = 0;
1327	struct moxa_board_conf *brd = moxa_boards;
1328	unsigned int i;
1329
1330	printk(KERN_INFO "MOXA Intellio family driver version %s\n",
1331			MOXA_VERSION);
1332
1333	tty_port_init(&moxa_service_port);
1334
1335	moxaDriver = tty_alloc_driver(MAX_PORTS + 1,
1336			TTY_DRIVER_REAL_RAW |
1337			TTY_DRIVER_DYNAMIC_DEV);
1338	if (IS_ERR(moxaDriver))
1339		return PTR_ERR(moxaDriver);
1340
1341	moxaDriver->name = "ttyMX";
1342	moxaDriver->major = ttymajor;
1343	moxaDriver->minor_start = 0;
1344	moxaDriver->type = TTY_DRIVER_TYPE_SERIAL;
1345	moxaDriver->subtype = SERIAL_TYPE_NORMAL;
1346	moxaDriver->init_termios = tty_std_termios;
1347	moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
1348	moxaDriver->init_termios.c_ispeed = 9600;
1349	moxaDriver->init_termios.c_ospeed = 9600;
1350	tty_set_operations(moxaDriver, &moxa_ops);
1351	/* Having one more port only for ioctls is ugly */
1352	tty_port_link_device(&moxa_service_port, moxaDriver, MAX_PORTS);
1353
1354	if (tty_register_driver(moxaDriver)) {
1355		printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
1356		tty_driver_kref_put(moxaDriver);
1357		return -1;
1358	}
1359
1360	/* Find the boards defined from module args. */
1361
1362	for (i = 0; i < MAX_BOARDS; i++) {
1363		if (!baseaddr[i])
1364			break;
1365		if (type[i] == MOXA_BOARD_C218_ISA ||
1366				type[i] == MOXA_BOARD_C320_ISA) {
1367			pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
1368					isabrds + 1, moxa_brdname[type[i] - 1],
1369					baseaddr[i]);
1370			brd->boardType = type[i];
1371			brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 :
1372					numports[i];
1373			brd->busType = MOXA_BUS_TYPE_ISA;
1374			brd->basemem = ioremap(baseaddr[i], 0x4000);
1375			if (!brd->basemem) {
1376				printk(KERN_ERR "MOXA: can't remap %lx\n",
1377						baseaddr[i]);
1378				continue;
1379			}
1380			if (moxa_init_board(brd, NULL)) {
1381				iounmap(brd->basemem);
1382				brd->basemem = NULL;
1383				continue;
1384			}
1385
1386			printk(KERN_INFO "MOXA isa board found at 0x%.8lx and "
1387					"ready (%u ports, firmware loaded)\n",
1388					baseaddr[i], brd->numPorts);
1389
1390			brd++;
1391			isabrds++;
1392		}
1393	}
1394
1395#ifdef CONFIG_PCI
1396	retval = pci_register_driver(&moxa_pci_driver);
1397	if (retval) {
1398		printk(KERN_ERR "Can't register MOXA pci driver!\n");
1399		if (isabrds)
1400			retval = 0;
1401	}
1402#endif
1403
1404	return retval;
1405}
1406
1407static void __exit moxa_exit(void)
1408{
1409	unsigned int i;
1410
1411#ifdef CONFIG_PCI
1412	pci_unregister_driver(&moxa_pci_driver);
1413#endif
1414
1415	for (i = 0; i < MAX_BOARDS; i++) /* ISA boards */
1416		if (moxa_boards[i].ready)
1417			moxa_board_deinit(&moxa_boards[i]);
1418
1419	del_timer_sync(&moxaTimer);
1420
1421	tty_unregister_driver(moxaDriver);
1422	tty_driver_kref_put(moxaDriver);
 
 
1423}
1424
1425module_init(moxa_init);
1426module_exit(moxa_exit);
1427
1428static void moxa_shutdown(struct tty_port *port)
1429{
1430	struct moxa_port *ch = container_of(port, struct moxa_port, port);
1431        MoxaPortDisable(ch);
1432	MoxaPortFlushData(ch, 2);
1433}
1434
1435static bool moxa_carrier_raised(struct tty_port *port)
1436{
1437	struct moxa_port *ch = container_of(port, struct moxa_port, port);
1438	int dcd;
1439
1440	spin_lock_irq(&port->lock);
1441	dcd = ch->DCDState;
1442	spin_unlock_irq(&port->lock);
1443	return dcd;
1444}
1445
1446static void moxa_dtr_rts(struct tty_port *port, bool active)
1447{
1448	struct moxa_port *ch = container_of(port, struct moxa_port, port);
1449	MoxaPortLineCtrl(ch, active, active);
1450}
1451
1452
1453static int moxa_open(struct tty_struct *tty, struct file *filp)
1454{
1455	struct moxa_board_conf *brd;
1456	struct moxa_port *ch;
1457	int port;
1458
1459	port = tty->index;
1460	if (port == MAX_PORTS) {
1461		return capable(CAP_SYS_ADMIN) ? 0 : -EPERM;
1462	}
1463	if (mutex_lock_interruptible(&moxa_openlock))
1464		return -ERESTARTSYS;
1465	brd = &moxa_boards[port / MAX_PORTS_PER_BOARD];
1466	if (!brd->ready) {
1467		mutex_unlock(&moxa_openlock);
1468		return -ENODEV;
1469	}
1470
1471	if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) {
1472		mutex_unlock(&moxa_openlock);
1473		return -ENODEV;
1474	}
1475
1476	ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
1477	ch->port.count++;
1478	tty->driver_data = ch;
1479	tty_port_tty_set(&ch->port, tty);
1480	mutex_lock(&ch->port.mutex);
1481	if (!tty_port_initialized(&ch->port)) {
1482		ch->statusflags = 0;
1483		moxa_set_tty_param(tty, &tty->termios);
1484		MoxaPortLineCtrl(ch, true, true);
1485		MoxaPortEnable(ch);
1486		MoxaSetFifo(ch, ch->type == PORT_16550A);
1487		tty_port_set_initialized(&ch->port, true);
1488	}
1489	mutex_unlock(&ch->port.mutex);
1490	mutex_unlock(&moxa_openlock);
1491
1492	return tty_port_block_til_ready(&ch->port, tty, filp);
1493}
1494
1495static void moxa_close(struct tty_struct *tty, struct file *filp)
1496{
1497	struct moxa_port *ch = tty->driver_data;
1498	ch->cflag = tty->termios.c_cflag;
1499	tty_port_close(&ch->port, tty, filp);
1500}
1501
1502static ssize_t moxa_write(struct tty_struct *tty, const u8 *buf, size_t count)
 
1503{
1504	struct moxa_port *ch = tty->driver_data;
1505	unsigned long flags;
1506	int len;
1507
1508	if (ch == NULL)
1509		return 0;
1510
1511	spin_lock_irqsave(&moxa_lock, flags);
1512	len = MoxaPortWriteData(tty, buf, count);
1513	spin_unlock_irqrestore(&moxa_lock, flags);
1514
1515	set_bit(LOWWAIT, &ch->statusflags);
1516	return len;
1517}
1518
1519static unsigned int moxa_write_room(struct tty_struct *tty)
1520{
1521	struct moxa_port *ch;
1522
1523	if (tty->flow.stopped)
1524		return 0;
1525	ch = tty->driver_data;
1526	if (ch == NULL)
1527		return 0;
1528	return MoxaPortTxFree(ch);
1529}
1530
1531static void moxa_flush_buffer(struct tty_struct *tty)
1532{
1533	struct moxa_port *ch = tty->driver_data;
1534
1535	if (ch == NULL)
1536		return;
1537	MoxaPortFlushData(ch, 1);
1538	tty_wakeup(tty);
1539}
1540
1541static unsigned int moxa_chars_in_buffer(struct tty_struct *tty)
1542{
1543	struct moxa_port *ch = tty->driver_data;
1544	unsigned int chars;
1545
1546	chars = MoxaPortTxQueue(ch);
1547	if (chars)
1548		/*
1549		 * Make it possible to wakeup anything waiting for output
1550		 * in tty_ioctl.c, etc.
1551		 */
1552        	set_bit(EMPTYWAIT, &ch->statusflags);
1553	return chars;
1554}
1555
1556static int moxa_tiocmget(struct tty_struct *tty)
1557{
1558	struct moxa_port *ch = tty->driver_data;
1559	bool dtr_active, rts_active;
1560	int flag = 0;
1561	int status;
1562
1563	MoxaPortGetLineOut(ch, &dtr_active, &rts_active);
1564	if (dtr_active)
1565		flag |= TIOCM_DTR;
1566	if (rts_active)
1567		flag |= TIOCM_RTS;
1568	status = MoxaPortLineStatus(ch);
1569	if (status & 1)
1570		flag |= TIOCM_CTS;
1571	if (status & 2)
1572		flag |= TIOCM_DSR;
1573	if (status & 4)
1574		flag |= TIOCM_CD;
1575	return flag;
1576}
1577
1578static int moxa_tiocmset(struct tty_struct *tty,
1579			 unsigned int set, unsigned int clear)
1580{
1581	bool dtr_active, rts_active;
1582	struct moxa_port *ch;
 
1583
1584	mutex_lock(&moxa_openlock);
1585	ch = tty->driver_data;
1586	if (!ch) {
1587		mutex_unlock(&moxa_openlock);
1588		return -EINVAL;
1589	}
1590
1591	MoxaPortGetLineOut(ch, &dtr_active, &rts_active);
1592	if (set & TIOCM_RTS)
1593		rts_active = true;
1594	if (set & TIOCM_DTR)
1595		dtr_active = true;
1596	if (clear & TIOCM_RTS)
1597		rts_active = false;
1598	if (clear & TIOCM_DTR)
1599		dtr_active = false;
1600	MoxaPortLineCtrl(ch, dtr_active, rts_active);
1601	mutex_unlock(&moxa_openlock);
1602	return 0;
1603}
1604
1605static void moxa_set_termios(struct tty_struct *tty,
1606		             const struct ktermios *old_termios)
1607{
1608	struct moxa_port *ch = tty->driver_data;
1609
1610	if (ch == NULL)
1611		return;
1612	moxa_set_tty_param(tty, old_termios);
1613	if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
1614		wake_up_interruptible(&ch->port.open_wait);
1615}
1616
1617static void moxa_stop(struct tty_struct *tty)
1618{
1619	struct moxa_port *ch = tty->driver_data;
1620
1621	if (ch == NULL)
1622		return;
1623	MoxaPortTxDisable(ch);
1624	set_bit(TXSTOPPED, &ch->statusflags);
1625}
1626
1627
1628static void moxa_start(struct tty_struct *tty)
1629{
1630	struct moxa_port *ch = tty->driver_data;
1631
1632	if (ch == NULL)
1633		return;
1634
1635	if (!test_bit(TXSTOPPED, &ch->statusflags))
1636		return;
1637
1638	MoxaPortTxEnable(ch);
1639	clear_bit(TXSTOPPED, &ch->statusflags);
1640}
1641
1642static void moxa_hangup(struct tty_struct *tty)
1643{
1644	struct moxa_port *ch = tty->driver_data;
1645	tty_port_hangup(&ch->port);
1646}
1647
1648static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
1649{
1650	unsigned long flags;
1651	dcd = !!dcd;
1652
1653	spin_lock_irqsave(&p->port.lock, flags);
1654	if (dcd != p->DCDState) {
1655        	p->DCDState = dcd;
1656        	spin_unlock_irqrestore(&p->port.lock, flags);
1657		if (!dcd)
1658			tty_port_tty_hangup(&p->port, true);
1659	}
1660	else
1661		spin_unlock_irqrestore(&p->port.lock, flags);
1662}
1663
1664static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
1665		u16 __iomem *ip)
1666{
1667	struct tty_struct *tty = tty_port_tty_get(&p->port);
1668	bool inited = tty_port_initialized(&p->port);
1669	void __iomem *ofsAddr;
 
1670	u16 intr;
1671
1672	if (tty) {
1673		if (test_bit(EMPTYWAIT, &p->statusflags) &&
1674				MoxaPortTxQueue(p) == 0) {
1675			clear_bit(EMPTYWAIT, &p->statusflags);
1676			tty_wakeup(tty);
1677		}
1678		if (test_bit(LOWWAIT, &p->statusflags) && !tty->flow.stopped &&
1679				MoxaPortTxQueue(p) <= WAKEUP_CHARS) {
1680			clear_bit(LOWWAIT, &p->statusflags);
1681			tty_wakeup(tty);
1682		}
1683
1684		if (inited && !tty_throttled(tty) &&
1685				MoxaPortRxQueue(p) > 0) { /* RX */
1686			MoxaPortReadData(p);
1687			tty_flip_buffer_push(&p->port);
1688		}
1689	} else {
1690		clear_bit(EMPTYWAIT, &p->statusflags);
1691		MoxaPortFlushData(p, 0); /* flush RX */
1692	}
1693
1694	if (!handle) /* nothing else to do */
1695		goto put;
1696
1697	intr = readw(ip); /* port irq status */
1698	if (intr == 0)
1699		goto put;
1700
1701	writew(0, ip); /* ACK port */
1702	ofsAddr = p->tableAddr;
1703	if (intr & IntrTx) /* disable tx intr */
1704		writew(readw(ofsAddr + HostStat) & ~WakeupTx,
1705				ofsAddr + HostStat);
1706
1707	if (!inited)
1708		goto put;
1709
1710	if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */
1711		tty_insert_flip_char(&p->port, 0, TTY_BREAK);
1712		tty_flip_buffer_push(&p->port);
1713	}
1714
1715	if (intr & IntrLine)
1716		moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state);
1717put:
1718	tty_kref_put(tty);
1719
1720	return 0;
1721}
1722
1723static void moxa_poll(struct timer_list *unused)
1724{
1725	struct moxa_board_conf *brd;
1726	u16 __iomem *ip;
1727	unsigned int card, port, served = 0;
1728
1729	spin_lock(&moxa_lock);
1730	for (card = 0; card < MAX_BOARDS; card++) {
1731		brd = &moxa_boards[card];
1732		if (!brd->ready)
1733			continue;
1734
1735		served++;
1736
1737		ip = NULL;
1738		if (readb(brd->intPend) == 0xff)
1739			ip = brd->intTable + readb(brd->intNdx);
1740
1741		for (port = 0; port < brd->numPorts; port++)
1742			moxa_poll_port(&brd->ports[port], !!ip, ip + port);
1743
1744		if (ip)
1745			writeb(0, brd->intPend); /* ACK */
1746
1747		if (moxaLowWaterChk) {
1748			struct moxa_port *p = brd->ports;
1749			for (port = 0; port < brd->numPorts; port++, p++)
1750				if (p->lowChkFlag) {
1751					p->lowChkFlag = 0;
1752					moxa_low_water_check(p->tableAddr);
1753				}
1754		}
1755	}
1756	moxaLowWaterChk = 0;
1757
1758	if (served)
1759		mod_timer(&moxaTimer, jiffies + HZ / 50);
1760	spin_unlock(&moxa_lock);
1761}
1762
1763/******************************************************************************/
1764
1765static void moxa_set_tty_param(struct tty_struct *tty,
1766			       const struct ktermios *old_termios)
1767{
1768	register struct ktermios *ts = &tty->termios;
1769	struct moxa_port *ch = tty->driver_data;
1770	int rts, cts, txflow, rxflow, xany, baud;
1771
1772	rts = cts = txflow = rxflow = xany = 0;
1773	if (ts->c_cflag & CRTSCTS)
1774		rts = cts = 1;
1775	if (ts->c_iflag & IXON)
1776		txflow = 1;
1777	if (ts->c_iflag & IXOFF)
1778		rxflow = 1;
1779	if (ts->c_iflag & IXANY)
1780		xany = 1;
1781
 
 
1782	MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany);
1783	baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty));
1784	if (baud == -1)
1785		baud = tty_termios_baud_rate(old_termios);
1786	/* Not put the baud rate into the termios data */
1787	tty_encode_baud_rate(tty, baud, baud);
1788}
1789
1790/*****************************************************************************
1791 *	Driver level functions: 					     *
1792 *****************************************************************************/
1793
1794static void MoxaPortFlushData(struct moxa_port *port, int mode)
1795{
1796	void __iomem *ofsAddr;
1797	if (mode < 0 || mode > 2)
1798		return;
1799	ofsAddr = port->tableAddr;
1800	moxafunc(ofsAddr, FC_FlushQueue, mode);
1801	if (mode != 1) {
1802		port->lowChkFlag = 0;
1803		moxa_low_water_check(ofsAddr);
1804	}
1805}
1806
1807/*
1808 *    Moxa Port Number Description:
1809 *
1810 *      MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And,
1811 *      the port number using in MOXA driver functions will be 0 to 31 for
1812 *      first MOXA board, 32 to 63 for second, 64 to 95 for third and 96
1813 *      to 127 for fourth. For example, if you setup three MOXA boards,
1814 *      first board is C218, second board is C320-16 and third board is
1815 *      C320-32. The port number of first board (C218 - 8 ports) is from
1816 *      0 to 7. The port number of second board (C320 - 16 ports) is form
1817 *      32 to 47. The port number of third board (C320 - 32 ports) is from
1818 *      64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to
1819 *      127 will be invalid.
1820 *
1821 *
1822 *      Moxa Functions Description:
1823 *
1824 *      Function 1:     Driver initialization routine, this routine must be
1825 *                      called when initialized driver.
1826 *      Syntax:
1827 *      void MoxaDriverInit();
1828 *
1829 *
1830 *      Function 2:     Moxa driver private IOCTL command processing.
1831 *      Syntax:
1832 *      int  MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port);
1833 *
1834 *           unsigned int cmd   : IOCTL command
1835 *           unsigned long arg  : IOCTL argument
1836 *           int port           : port number (0 - 127)
1837 *
1838 *           return:    0  (OK)
1839 *                      -EINVAL
1840 *                      -ENOIOCTLCMD
1841 *
1842 *
1843 *      Function 6:     Enable this port to start Tx/Rx data.
1844 *      Syntax:
1845 *      void MoxaPortEnable(int port);
1846 *           int port           : port number (0 - 127)
1847 *
1848 *
1849 *      Function 7:     Disable this port
1850 *      Syntax:
1851 *      void MoxaPortDisable(int port);
1852 *           int port           : port number (0 - 127)
1853 *
1854 *
1855 *      Function 10:    Setting baud rate of this port.
1856 *      Syntax:
1857 *      speed_t MoxaPortSetBaud(int port, speed_t baud);
1858 *           int port           : port number (0 - 127)
1859 *           long baud          : baud rate (50 - 115200)
1860 *
1861 *           return:    0       : this port is invalid or baud < 50
1862 *                      50 - 115200 : the real baud rate set to the port, if
1863 *                                    the argument baud is large than maximun
1864 *                                    available baud rate, the real setting
1865 *                                    baud rate will be the maximun baud rate.
1866 *
1867 *
1868 *      Function 12:    Configure the port.
1869 *      Syntax:
1870 *      int  MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud);
1871 *           int port           : port number (0 - 127)
1872 *           struct ktermios * termio : termio structure pointer
1873 *	     speed_t baud	: baud rate
1874 *
1875 *           return:    -1      : this port is invalid or termio == NULL
1876 *                      0       : setting O.K.
1877 *
1878 *
1879 *      Function 13:    Get the DTR/RTS state of this port.
1880 *      Syntax:
1881 *      int  MoxaPortGetLineOut(int port, bool *dtrState, bool *rtsState);
1882 *           int port           : port number (0 - 127)
1883 *           bool * dtr_active  : pointer to bool to receive the current DTR
1884 *                                state. (if NULL, this function will not
1885 *                                write to this address)
1886 *           bool * rts_active  : pointer to bool to receive the current RTS
1887 *                                state. (if NULL, this function will not
1888 *                                write to this address)
1889 *
1890 *           return:    -1      : this port is invalid
1891 *                      0       : O.K.
1892 *
1893 *
1894 *      Function 14:    Setting the DTR/RTS output state of this port.
1895 *      Syntax:
1896 *      void MoxaPortLineCtrl(int port, bool dtrState, bool rtsState);
1897 *           int port           : port number (0 - 127)
1898 *           bool dtr_active    : DTR output state
1899 *           bool rts_active    : RTS output state
1900 *
1901 *
1902 *      Function 15:    Setting the flow control of this port.
1903 *      Syntax:
1904 *      void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow,
1905 *                            int txFlow,int xany);
1906 *           int port           : port number (0 - 127)
1907 *           int rtsFlow        : H/W RTS flow control (0: no, 1: yes)
1908 *           int ctsFlow        : H/W CTS flow control (0: no, 1: yes)
1909 *           int rxFlow         : S/W Rx XON/XOFF flow control (0: no, 1: yes)
1910 *           int txFlow         : S/W Tx XON/XOFF flow control (0: no, 1: yes)
1911 *           int xany           : S/W XANY flow control (0: no, 1: yes)
1912 *
1913 *
1914 *      Function 16:    Get ths line status of this port
1915 *      Syntax:
1916 *      int  MoxaPortLineStatus(int port);
1917 *           int port           : port number (0 - 127)
1918 *
1919 *           return:    Bit 0 - CTS state (0: off, 1: on)
1920 *                      Bit 1 - DSR state (0: off, 1: on)
1921 *                      Bit 2 - DCD state (0: off, 1: on)
1922 *
1923 *
1924 *      Function 19:    Flush the Rx/Tx buffer data of this port.
1925 *      Syntax:
1926 *      void MoxaPortFlushData(int port, int mode);
1927 *           int port           : port number (0 - 127)
1928 *           int mode    
1929 *                      0       : flush the Rx buffer 
1930 *                      1       : flush the Tx buffer 
1931 *                      2       : flush the Rx and Tx buffer 
1932 *
1933 *
1934 *      Function 20:    Write data.
1935 *      Syntax:
1936 *      ssize_t  MoxaPortWriteData(int port, u8 *buffer, size_t length);
1937 *           int port           : port number (0 - 127)
1938 *           u8 *buffer         : pointer to write data buffer.
1939 *           size_t length      : write data length
1940 *
1941 *           return:    0 - length      : real write data length
1942 *
1943 *
1944 *      Function 21:    Read data.
1945 *      Syntax:
1946 *      int  MoxaPortReadData(int port, struct tty_struct *tty);
1947 *           int port           : port number (0 - 127)
1948 *	     struct tty_struct *tty : tty for data
1949 *
1950 *           return:    0 - length      : real read data length
1951 *
1952 *
1953 *      Function 24:    Get the Tx buffer current queued data bytes
1954 *      Syntax:
1955 *      int  MoxaPortTxQueue(int port);
1956 *           int port           : port number (0 - 127)
1957 *
1958 *           return:    ..      : Tx buffer current queued data bytes
1959 *
1960 *
1961 *      Function 25:    Get the Tx buffer current free space
1962 *      Syntax:
1963 *      int  MoxaPortTxFree(int port);
1964 *           int port           : port number (0 - 127)
1965 *
1966 *           return:    ..      : Tx buffer current free space
1967 *
1968 *
1969 *      Function 26:    Get the Rx buffer current queued data bytes
1970 *      Syntax:
1971 *      int  MoxaPortRxQueue(int port);
1972 *           int port           : port number (0 - 127)
1973 *
1974 *           return:    ..      : Rx buffer current queued data bytes
1975 *
1976 *
1977 *      Function 28:    Disable port data transmission.
1978 *      Syntax:
1979 *      void MoxaPortTxDisable(int port);
1980 *           int port           : port number (0 - 127)
1981 *
1982 *
1983 *      Function 29:    Enable port data transmission.
1984 *      Syntax:
1985 *      void MoxaPortTxEnable(int port);
1986 *           int port           : port number (0 - 127)
1987 *
1988 *
1989 *      Function 31:    Get the received BREAK signal count and reset it.
1990 *      Syntax:
1991 *      int  MoxaPortResetBrkCnt(int port);
1992 *           int port           : port number (0 - 127)
1993 *
1994 *           return:    0 - ..  : BREAK signal count
1995 *
1996 *
1997 */
1998
1999static void MoxaPortEnable(struct moxa_port *port)
2000{
2001	void __iomem *ofsAddr;
2002	u16 lowwater = 512;
2003
2004	ofsAddr = port->tableAddr;
2005	writew(lowwater, ofsAddr + Low_water);
2006	if (MOXA_IS_320(port->board))
2007		moxafunc(ofsAddr, FC_SetBreakIrq, 0);
2008	else
2009		writew(readw(ofsAddr + HostStat) | WakeupBreak,
2010				ofsAddr + HostStat);
2011
2012	moxafunc(ofsAddr, FC_SetLineIrq, Magic_code);
2013	moxafunc(ofsAddr, FC_FlushQueue, 2);
2014
2015	moxafunc(ofsAddr, FC_EnableCH, Magic_code);
2016	MoxaPortLineStatus(port);
2017}
2018
2019static void MoxaPortDisable(struct moxa_port *port)
2020{
2021	void __iomem *ofsAddr = port->tableAddr;
2022
2023	moxafunc(ofsAddr, FC_SetFlowCtl, 0);	/* disable flow control */
2024	moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code);
2025	writew(0, ofsAddr + HostStat);
2026	moxafunc(ofsAddr, FC_DisableCH, Magic_code);
2027}
2028
2029static speed_t MoxaPortSetBaud(struct moxa_port *port, speed_t baud)
2030{
2031	void __iomem *ofsAddr = port->tableAddr;
2032	unsigned int clock, val;
2033	speed_t max;
2034
2035	max = MOXA_IS_320(port->board) ? 460800 : 921600;
2036	if (baud < 50)
2037		return 0;
2038	if (baud > max)
2039		baud = max;
2040	clock = 921600;
2041	val = clock / baud;
2042	moxafunc(ofsAddr, FC_SetBaud, val);
2043	baud = clock / val;
2044	return baud;
2045}
2046
2047static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
2048		speed_t baud)
2049{
2050	void __iomem *ofsAddr;
2051	tcflag_t mode = 0;
2052
2053	ofsAddr = port->tableAddr;
2054
2055	mode = termio->c_cflag & CSIZE;
2056	if (mode == CS5)
2057		mode = MX_CS5;
2058	else if (mode == CS6)
2059		mode = MX_CS6;
2060	else if (mode == CS7)
2061		mode = MX_CS7;
2062	else if (mode == CS8)
2063		mode = MX_CS8;
2064
2065	if (termio->c_cflag & CSTOPB) {
2066		if (mode == MX_CS5)
2067			mode |= MX_STOP15;
2068		else
2069			mode |= MX_STOP2;
2070	} else
2071		mode |= MX_STOP1;
2072
2073	if (termio->c_cflag & PARENB) {
2074		if (termio->c_cflag & PARODD) {
2075			if (termio->c_cflag & CMSPAR)
2076				mode |= MX_PARMARK;
2077			else
2078				mode |= MX_PARODD;
2079		} else {
2080			if (termio->c_cflag & CMSPAR)
2081				mode |= MX_PARSPACE;
2082			else
2083				mode |= MX_PAREVEN;
2084		}
2085	} else
2086		mode |= MX_PARNONE;
2087
2088	moxafunc(ofsAddr, FC_SetDataMode, (u16)mode);
2089
2090	if (MOXA_IS_320(port->board) && baud >= 921600)
2091		return -1;
2092
2093	baud = MoxaPortSetBaud(port, baud);
2094
2095	if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
2096	        spin_lock_irq(&moxafunc_lock);
2097		writeb(termio->c_cc[VSTART], ofsAddr + FuncArg);
2098		writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1);
2099		writeb(FC_SetXonXoff, ofsAddr + FuncCode);
2100		moxa_wait_finish(ofsAddr);
2101		spin_unlock_irq(&moxafunc_lock);
2102
2103	}
2104	return baud;
2105}
2106
2107static int MoxaPortGetLineOut(struct moxa_port *port, bool *dtr_active,
2108		bool *rts_active)
2109{
2110	if (dtr_active)
2111		*dtr_active = port->lineCtrl & DTR_ON;
2112	if (rts_active)
2113		*rts_active = port->lineCtrl & RTS_ON;
2114
2115	return 0;
2116}
2117
2118static void MoxaPortLineCtrl(struct moxa_port *port, bool dtr_active, bool rts_active)
2119{
2120	u8 mode = 0;
2121
2122	if (dtr_active)
2123		mode |= DTR_ON;
2124	if (rts_active)
2125		mode |= RTS_ON;
2126	port->lineCtrl = mode;
2127	moxafunc(port->tableAddr, FC_LineControl, mode);
2128}
2129
2130static void MoxaPortFlowCtrl(struct moxa_port *port, int rts, int cts,
2131		int txflow, int rxflow, int txany)
2132{
2133	int mode = 0;
2134
2135	if (rts)
2136		mode |= RTS_FlowCtl;
2137	if (cts)
2138		mode |= CTS_FlowCtl;
2139	if (txflow)
2140		mode |= Tx_FlowCtl;
2141	if (rxflow)
2142		mode |= Rx_FlowCtl;
2143	if (txany)
2144		mode |= IXM_IXANY;
2145	moxafunc(port->tableAddr, FC_SetFlowCtl, mode);
2146}
2147
2148static int MoxaPortLineStatus(struct moxa_port *port)
2149{
2150	void __iomem *ofsAddr;
2151	int val;
2152
2153	ofsAddr = port->tableAddr;
2154	if (MOXA_IS_320(port->board))
2155		val = moxafuncret(ofsAddr, FC_LineStatus, 0);
2156	else
2157		val = readw(ofsAddr + FlagStat) >> 4;
2158	val &= 0x0B;
2159	if (val & 8)
2160		val |= 4;
2161	moxa_new_dcdstate(port, val & 8);
2162	val &= 7;
2163	return val;
2164}
2165
2166static ssize_t MoxaPortWriteData(struct tty_struct *tty, const u8 *buffer,
2167				 size_t len)
2168{
2169	struct moxa_port *port = tty->driver_data;
2170	void __iomem *baseAddr, *ofsAddr, *ofs;
2171	size_t c, total;
2172	u16 head, tail, tx_mask, spage, epage;
2173	u16 pageno, pageofs, bufhead;
2174
2175	ofsAddr = port->tableAddr;
2176	baseAddr = port->board->basemem;
2177	tx_mask = readw(ofsAddr + TX_mask);
2178	spage = readw(ofsAddr + Page_txb);
2179	epage = readw(ofsAddr + EndPage_txb);
2180	tail = readw(ofsAddr + TXwptr);
2181	head = readw(ofsAddr + TXrptr);
2182	c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask);
2183	if (c > len)
2184		c = len;
2185	moxaLog.txcnt[port->port.tty->index] += c;
2186	total = c;
2187	if (spage == epage) {
2188		bufhead = readw(ofsAddr + Ofs_txb);
2189		writew(spage, baseAddr + Control_reg);
2190		while (c > 0) {
2191			if (head > tail)
2192				len = head - tail - 1;
2193			else
2194				len = tx_mask + 1 - tail;
2195			len = (c > len) ? len : c;
2196			ofs = baseAddr + DynPage_addr + bufhead + tail;
2197			memcpy_toio(ofs, buffer, len);
2198			buffer += len;
2199			tail = (tail + len) & tx_mask;
2200			c -= len;
2201		}
2202	} else {
2203		pageno = spage + (tail >> 13);
2204		pageofs = tail & Page_mask;
2205		while (c > 0) {
2206			len = Page_size - pageofs;
2207			if (len > c)
2208				len = c;
2209			writeb(pageno, baseAddr + Control_reg);
2210			ofs = baseAddr + DynPage_addr + pageofs;
2211			memcpy_toio(ofs, buffer, len);
2212			buffer += len;
2213			if (++pageno == epage)
2214				pageno = spage;
2215			pageofs = 0;
2216			c -= len;
2217		}
2218		tail = (tail + total) & tx_mask;
2219	}
2220	writew(tail, ofsAddr + TXwptr);
2221	writeb(1, ofsAddr + CD180TXirq);	/* start to send */
2222	return total;
2223}
2224
2225static int MoxaPortReadData(struct moxa_port *port)
2226{
2227	struct tty_struct *tty = port->port.tty;
 
2228	void __iomem *baseAddr, *ofsAddr, *ofs;
2229	u8 *dst;
2230	unsigned int count, len, total;
2231	u16 tail, rx_mask, spage, epage;
2232	u16 pageno, pageofs, bufhead, head;
2233
2234	ofsAddr = port->tableAddr;
2235	baseAddr = port->board->basemem;
2236	head = readw(ofsAddr + RXrptr);
2237	tail = readw(ofsAddr + RXwptr);
2238	rx_mask = readw(ofsAddr + RX_mask);
2239	spage = readw(ofsAddr + Page_rxb);
2240	epage = readw(ofsAddr + EndPage_rxb);
2241	count = (tail >= head) ? (tail - head) : (tail - head + rx_mask + 1);
2242	if (count == 0)
2243		return 0;
2244
2245	total = count;
2246	moxaLog.rxcnt[tty->index] += total;
2247	if (spage == epage) {
2248		bufhead = readw(ofsAddr + Ofs_rxb);
2249		writew(spage, baseAddr + Control_reg);
2250		while (count > 0) {
2251			ofs = baseAddr + DynPage_addr + bufhead + head;
2252			len = (tail >= head) ? (tail - head) :
2253					(rx_mask + 1 - head);
2254			len = tty_prepare_flip_string(&port->port, &dst,
2255					min(len, count));
2256			memcpy_fromio(dst, ofs, len);
2257			head = (head + len) & rx_mask;
2258			count -= len;
2259		}
2260	} else {
2261		pageno = spage + (head >> 13);
2262		pageofs = head & Page_mask;
2263		while (count > 0) {
2264			writew(pageno, baseAddr + Control_reg);
2265			ofs = baseAddr + DynPage_addr + pageofs;
2266			len = tty_prepare_flip_string(&port->port, &dst,
2267					min(Page_size - pageofs, count));
2268			memcpy_fromio(dst, ofs, len);
2269
2270			count -= len;
2271			pageofs = (pageofs + len) & Page_mask;
2272			if (pageofs == 0 && ++pageno == epage)
2273				pageno = spage;
2274		}
2275		head = (head + total) & rx_mask;
2276	}
2277	writew(head, ofsAddr + RXrptr);
2278	if (readb(ofsAddr + FlagStat) & Xoff_state) {
2279		moxaLowWaterChk = 1;
2280		port->lowChkFlag = 1;
2281	}
2282	return total;
2283}
2284
2285
2286static unsigned int MoxaPortTxQueue(struct moxa_port *port)
2287{
2288	void __iomem *ofsAddr = port->tableAddr;
2289	u16 rptr, wptr, mask;
2290
2291	rptr = readw(ofsAddr + TXrptr);
2292	wptr = readw(ofsAddr + TXwptr);
2293	mask = readw(ofsAddr + TX_mask);
2294	return (wptr - rptr) & mask;
2295}
2296
2297static unsigned int MoxaPortTxFree(struct moxa_port *port)
2298{
2299	void __iomem *ofsAddr = port->tableAddr;
2300	u16 rptr, wptr, mask;
2301
2302	rptr = readw(ofsAddr + TXrptr);
2303	wptr = readw(ofsAddr + TXwptr);
2304	mask = readw(ofsAddr + TX_mask);
2305	return mask - ((wptr - rptr) & mask);
2306}
2307
2308static int MoxaPortRxQueue(struct moxa_port *port)
2309{
2310	void __iomem *ofsAddr = port->tableAddr;
2311	u16 rptr, wptr, mask;
2312
2313	rptr = readw(ofsAddr + RXrptr);
2314	wptr = readw(ofsAddr + RXwptr);
2315	mask = readw(ofsAddr + RX_mask);
2316	return (wptr - rptr) & mask;
2317}
2318
2319static void MoxaPortTxDisable(struct moxa_port *port)
2320{
2321	moxafunc(port->tableAddr, FC_SetXoffState, Magic_code);
2322}
2323
2324static void MoxaPortTxEnable(struct moxa_port *port)
2325{
2326	moxafunc(port->tableAddr, FC_SetXonState, Magic_code);
2327}
2328
2329static int moxa_get_serial_info(struct tty_struct *tty,
2330		struct serial_struct *ss)
2331{
2332	struct moxa_port *info = tty->driver_data;
2333
2334	if (tty->index == MAX_PORTS)
2335		return -EINVAL;
2336	if (!info)
2337		return -ENODEV;
2338	mutex_lock(&info->port.mutex);
2339	ss->type = info->type;
2340	ss->line = info->port.tty->index;
2341	ss->flags = info->port.flags;
2342	ss->baud_base = 921600;
2343	ss->close_delay = jiffies_to_msecs(info->port.close_delay) / 10;
2344	mutex_unlock(&info->port.mutex);
2345	return 0;
2346}
2347
2348
2349static int moxa_set_serial_info(struct tty_struct *tty,
2350		struct serial_struct *ss)
2351{
2352	struct moxa_port *info = tty->driver_data;
2353	unsigned int close_delay;
2354
2355	if (tty->index == MAX_PORTS)
2356		return -EINVAL;
2357	if (!info)
2358		return -ENODEV;
2359
2360	close_delay = msecs_to_jiffies(ss->close_delay * 10);
 
 
 
2361
2362	mutex_lock(&info->port.mutex);
2363	if (!capable(CAP_SYS_ADMIN)) {
2364		if (close_delay != info->port.close_delay ||
2365		    ss->type != info->type ||
2366		    ((ss->flags & ~ASYNC_USR_MASK) !=
2367		     (info->port.flags & ~ASYNC_USR_MASK))) {
2368			mutex_unlock(&info->port.mutex);
2369			return -EPERM;
2370		}
2371	} else {
2372		info->port.close_delay = close_delay;
2373
2374		MoxaSetFifo(info, ss->type == PORT_16550A);
 
2375
2376		info->type = ss->type;
2377	}
2378	mutex_unlock(&info->port.mutex);
2379	return 0;
2380}
2381
2382
2383
2384/*****************************************************************************
2385 *	Static local functions: 					     *
2386 *****************************************************************************/
2387
2388static void MoxaSetFifo(struct moxa_port *port, int enable)
2389{
2390	void __iomem *ofsAddr = port->tableAddr;
2391
2392	if (!enable) {
2393		moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0);
2394		moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1);
2395	} else {
2396		moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3);
2397		moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16);
2398	}
2399}